qlcnic: Enhance diagnostic loopback error codes.

o Enhanced the driver to use standard Linux error codes
o Return a unique error code to indicate loopback is in progress

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qlcnic/qlcnic.h

@@ -950,12 +950,6 @@ struct qlcnic_ipaddr {
 #define QLCNIC_READD_AGE	20
 #define QLCNIC_LB_MAX_FILTERS	64
 #define QLCNIC_LB_BUCKET_SIZE	32
-
-/* QLCNIC Driver Error Code */
-#define QLCNIC_FW_NOT_RESPOND		51
-#define QLCNIC_TEST_IN_PROGRESS		52
-#define QLCNIC_UNDEFINED_ERROR		53
-#define QLCNIC_LB_CABLE_NOT_CONN	54
 #define QLCNIC_ILB_MAX_RCV_LOOP	10
 
 struct qlcnic_filter {

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c

@@ -1652,7 +1652,7 @@ int qlcnic_83xx_loopback_test(struct net_device *netdev, u8 mode)
 	if (ahw->op_mode == QLCNIC_NON_PRIV_FUNC) {
 		netdev_warn(netdev,
 			    "Loopback test not supported in non privileged mode\n");
-		return ret;
+		return -ENOTSUPP;
 	}
 
 	if (test_bit(__QLCNIC_RESETTING, &adapter->state)) {
@@ -1686,13 +1686,13 @@ int qlcnic_83xx_loopback_test(struct net_device *netdev, u8 mode)
 		if (test_bit(__QLCNIC_RESETTING, &adapter->state)) {
 			netdev_info(netdev,
 				    "Device is resetting, free LB test resources\n");
-			ret = -EIO;
+			ret = -EBUSY;
 			goto free_diag_res;
 		}
 		if (loop++ > QLC_83XX_LB_WAIT_COUNT) {
 			netdev_info(netdev,
 				    "Firmware didn't sent link up event to loopback request\n");
-			ret = -QLCNIC_FW_NOT_RESPOND;
+			ret = -ETIMEDOUT;
 			qlcnic_83xx_clear_lb_mode(adapter, mode);
 			goto free_diag_res;
 		}
@@ -1729,6 +1729,15 @@ int qlcnic_83xx_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode)
 		return status;
 
 	config = ahw->port_config;
+
+	/* Check if port is already in loopback mode */
+	if ((config & QLC_83XX_CFG_LOOPBACK_HSS) ||
+	    (config & QLC_83XX_CFG_LOOPBACK_EXT)) {
+		netdev_err(netdev,
+			   "Port already in Loopback mode.\n");
+		return -EINPROGRESS;
+	}
+
 	set_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status);
 
 	if (mode == QLCNIC_ILB_MODE)
@@ -1756,14 +1765,14 @@ int qlcnic_83xx_set_lb_mode(struct qlcnic_adapter *adapter, u8 mode)
 			netdev_info(netdev,
 				    "Device is resetting, free LB test resources\n");
 			clear_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status);
-			return -EIO;
+			return -EBUSY;
 		}
 		if (loop++ > QLC_83XX_LB_WAIT_COUNT) {
 			netdev_err(netdev,
 				   "Did not receive IDC completion AEN\n");
 			clear_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status);
 			qlcnic_83xx_clear_lb_mode(adapter, mode);
-			return -EIO;
+			return -ETIMEDOUT;
 		}
 	} while (test_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status));
 
@@ -1805,14 +1814,14 @@ int qlcnic_83xx_clear_lb_mode(struct qlcnic_adapter *adapter, u8 mode)
 			netdev_info(netdev,
 				    "Device is resetting, free LB test resources\n");
 			clear_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status);
-			return -EIO;
+			return -EBUSY;
 		}
 
 		if (loop++ > QLC_83XX_LB_WAIT_COUNT) {
 			netdev_err(netdev,
 				   "Did not receive IDC completion AEN\n");
 			clear_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status);
-			return -EIO;
+			return -ETIMEDOUT;
 		}
 	} while (test_bit(QLC_83XX_IDC_COMP_AEN, &ahw->idc.status));
 

drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c

@@ -980,9 +980,9 @@ int qlcnic_loopback_test(struct net_device *netdev, u8 mode)
 		msleep(500);
 		qlcnic_process_rcv_ring_diag(sds_ring);
 		if (loop++ > QLCNIC_ILB_MAX_RCV_LOOP) {
-			netdev_info(netdev, "firmware didnt respond to loopback"
-				" configure request\n");
-			ret = -QLCNIC_FW_NOT_RESPOND;
+			netdev_info(netdev,
+				    "Firmware didn't sent link up event to loopback request\n");
+			ret = -ETIMEDOUT;
 			goto free_res;
 		} else if (adapter->ahw->diag_cnt) {
 			ret = adapter->ahw->diag_cnt;

drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c

@@ -919,17 +919,17 @@ static void qlcnic_handle_fw_message(int desc_cnt, int index,
 			break;
 		case 1:
 			dev_info(dev, "loopback already in progress\n");
-			adapter->ahw->diag_cnt = -QLCNIC_TEST_IN_PROGRESS;
+			adapter->ahw->diag_cnt = -EINPROGRESS;
 			break;
 		case 2:
 			dev_info(dev, "loopback cable is not connected\n");
-			adapter->ahw->diag_cnt = -QLCNIC_LB_CABLE_NOT_CONN;
+			adapter->ahw->diag_cnt = -ENODEV;
 			break;
 		default:
 			dev_info(dev,
 				 "loopback configure request failed, err %x\n",
 				 ret);
-			adapter->ahw->diag_cnt = -QLCNIC_UNDEFINED_ERROR;
+			adapter->ahw->diag_cnt = -EIO;
 			break;
 		}
 		break;