usb: Convert all users to new usb_phy

Use the new usb_phy_* functions with transceiver
operations instead of the old otg functions.

Includes fixes from Sascha Hauer.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Acked-by: Li Yang <leoli@freescale.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

arch/arm/mach-tegra/usb_phy.c

@@ -608,13 +608,13 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)
 	writel(val, base + ULPI_TIMING_CTRL_1);
 
 	/* Fix VbusInvalid due to floating VBUS */
-	ret = otg_io_write(phy->ulpi, 0x40, 0x08);
+	ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08);
 	if (ret) {
 		pr_err("%s: ulpi write failed\n", __func__);
 		return ret;
 	}
 
-	ret = otg_io_write(phy->ulpi, 0x80, 0x0B);
+	ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B);
 	if (ret) {
 		pr_err("%s: ulpi write failed\n", __func__);
 		return ret;

drivers/usb/gadget/ci13xxx_msm.c

@@ -37,10 +37,10 @@ static void ci13xxx_msm_notify_event(struct ci13xxx *udc, unsigned event)
 		 * Put the transceiver in non-driving mode. Otherwise host
 		 * may not detect soft-disconnection.
 		 */
-		val = otg_io_read(udc->transceiver, ULPI_FUNC_CTRL);
+		val = usb_phy_io_read(udc->transceiver, ULPI_FUNC_CTRL);
 		val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
 		val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
-		otg_io_write(udc->transceiver, val, ULPI_FUNC_CTRL);
+		usb_phy_io_write(udc->transceiver, val, ULPI_FUNC_CTRL);
 		break;
 	default:
 		dev_dbg(dev, "unknown ci13xxx_udc event\n");

drivers/usb/gadget/ci13xxx_udc.c

@@ -2537,7 +2537,7 @@ static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 	struct ci13xxx *udc = container_of(_gadget, struct ci13xxx, gadget);
 
 	if (udc->transceiver)
-		return otg_set_power(udc->transceiver, mA);
+		return usb_phy_set_power(udc->transceiver, mA);
 	return -ENOTSUPP;
 }
 
@@ -2900,7 +2900,7 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev,
 	if (retval < 0)
 		goto free_udc;
 
-	udc->transceiver = otg_get_transceiver();
+	udc->transceiver = usb_get_transceiver();
 
 	if (udc->udc_driver->flags & CI13XXX_REQUIRE_TRANSCEIVER) {
 		if (udc->transceiver == NULL) {
@@ -2946,7 +2946,7 @@ static int udc_probe(struct ci13xxx_udc_driver *driver, struct device *dev,
 remove_trans:
 	if (udc->transceiver) {
 		otg_set_peripheral(udc->transceiver, &udc->gadget);
-		otg_put_transceiver(udc->transceiver);
+		usb_put_transceiver(udc->transceiver);
 	}
 
 	err("error = %i", retval);
@@ -2958,7 +2958,7 @@ unreg_device:
 	device_unregister(&udc->gadget.dev);
 put_transceiver:
 	if (udc->transceiver)
-		otg_put_transceiver(udc->transceiver);
+		usb_put_transceiver(udc->transceiver);
 free_udc:
 	kfree(udc);
 	_udc = NULL;
@@ -2982,7 +2982,7 @@ static void udc_remove(void)
 
 	if (udc->transceiver) {
 		otg_set_peripheral(udc->transceiver, &udc->gadget);
-		otg_put_transceiver(udc->transceiver);
+		usb_put_transceiver(udc->transceiver);
 	}
 #ifdef CONFIG_USB_GADGET_DEBUG_FILES
 	dbg_remove_files(&udc->gadget.dev);

drivers/usb/gadget/fsl_udc_core.c

@@ -1217,7 +1217,7 @@ static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 
 	udc = container_of(gadget, struct fsl_udc, gadget);
 	if (udc->transceiver)
-		return otg_set_power(udc->transceiver, mA);
+		return usb_phy_set_power(udc->transceiver, mA);
 	return -ENOTSUPP;
 }
 
@@ -2430,7 +2430,7 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_USB_OTG
 	if (pdata->operating_mode == FSL_USB2_DR_OTG) {
-		udc_controller->transceiver = otg_get_transceiver();
+		udc_controller->transceiver = usb_get_transceiver();
 		if (!udc_controller->transceiver) {
 			ERR("Can't find OTG driver!\n");
 			ret = -ENODEV;

drivers/usb/gadget/langwell_udc.c

@@ -1261,9 +1261,9 @@ static int langwell_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 	dev_vdbg(&dev->pdev->dev, "---> %s()\n", __func__);
 
 	if (dev->transceiver) {
-		dev_vdbg(&dev->pdev->dev, "otg_set_power\n");
+		dev_vdbg(&dev->pdev->dev, "usb_phy_set_power\n");
 		dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);
-		return otg_set_power(dev->transceiver, mA);
+		return usb_phy_set_power(dev->transceiver, mA);
 	}
 
 	dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__);

drivers/usb/gadget/mv_udc_core.c

@@ -2181,7 +2181,7 @@ static int __devinit mv_udc_probe(struct platform_device *dev)
 
 #ifdef CONFIG_USB_OTG_UTILS
 	if (pdata->mode == MV_USB_MODE_OTG)
-		udc->transceiver = otg_get_transceiver();
+		udc->transceiver = usb_get_transceiver();
 #endif
 
 	udc->clknum = pdata->clknum;

drivers/usb/gadget/omap_udc.c

@@ -1345,7 +1345,7 @@ static int omap_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 
 	udc = container_of(gadget, struct omap_udc, gadget);
 	if (udc->transceiver)
-		return otg_set_power(udc->transceiver, mA);
+		return usb_phy_set_power(udc->transceiver, mA);
 	return -EOPNOTSUPP;
 }
 
@@ -1839,11 +1839,13 @@ static void devstate_irq(struct omap_udc *udc, u16 irq_src)
 					spin_lock(&udc->lock);
 				}
 				if (udc->transceiver)
-					otg_set_suspend(udc->transceiver, 1);
+					usb_phy_set_suspend(
+							udc->transceiver, 1);
 			} else {
 				VDBG("resume\n");
 				if (udc->transceiver)
-					otg_set_suspend(udc->transceiver, 0);
+					usb_phy_set_suspend(
+							udc->transceiver, 0);
 				if (udc->gadget.speed == USB_SPEED_FULL
 						&& udc->driver->resume) {
 					spin_unlock(&udc->lock);
@@ -2863,7 +2865,7 @@ static int __init omap_udc_probe(struct platform_device *pdev)
 		 * use it.  Except for OTG, we don't _need_ to talk to one;
 		 * but not having one probably means no VBUS detection.
 		 */
-		xceiv = otg_get_transceiver();
+		xceiv = usb_get_transceiver();
 		if (xceiv)
 			type = xceiv->label;
 		else if (config->otg) {
@@ -3009,7 +3011,7 @@ cleanup1:
 
 cleanup0:
 	if (xceiv)
-		otg_put_transceiver(xceiv);
+		usb_put_transceiver(xceiv);
 
 	if (cpu_is_omap16xx() || cpu_is_omap24xx() || cpu_is_omap7xx()) {
 		clk_disable(hhc_clk);
@@ -3039,7 +3041,7 @@ static int __exit omap_udc_remove(struct platform_device *pdev)
 
 	pullup_disable(udc);
 	if (udc->transceiver) {
-		otg_put_transceiver(udc->transceiver);
+		usb_put_transceiver(udc->transceiver);
 		udc->transceiver = NULL;
 	}
 	omap_writew(0, UDC_SYSCON1);

drivers/usb/gadget/pxa25x_udc.c

@@ -995,7 +995,7 @@ static int pxa25x_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 	udc = container_of(_gadget, struct pxa25x_udc, gadget);
 
 	if (udc->transceiver)
-		return otg_set_power(udc->transceiver, mA);
+		return usb_phy_set_power(udc->transceiver, mA);
 	return -EOPNOTSUPP;
 }
 
@@ -2159,7 +2159,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
 	dev->dev = &pdev->dev;
 	dev->mach = pdev->dev.platform_data;
 
-	dev->transceiver = otg_get_transceiver();
+	dev->transceiver = usb_get_transceiver();
 
 	if (gpio_is_valid(dev->mach->gpio_pullup)) {
 		if ((retval = gpio_request(dev->mach->gpio_pullup,
@@ -2238,7 +2238,7 @@ lubbock_fail0:
 		gpio_free(dev->mach->gpio_pullup);
  err_gpio_pullup:
 	if (dev->transceiver) {
-		otg_put_transceiver(dev->transceiver);
+		usb_put_transceiver(dev->transceiver);
 		dev->transceiver = NULL;
 	}
 	clk_put(dev->clk);
@@ -2280,7 +2280,7 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
 	clk_put(dev->clk);
 
 	if (dev->transceiver) {
-		otg_put_transceiver(dev->transceiver);
+		usb_put_transceiver(dev->transceiver);
 		dev->transceiver = NULL;
 	}
 

drivers/usb/gadget/pxa27x_udc.c

@@ -1666,7 +1666,7 @@ static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA)
 
 	udc = to_gadget_udc(_gadget);
 	if (udc->transceiver)
-		return otg_set_power(udc->transceiver, mA);
+		return usb_phy_set_power(udc->transceiver, mA);
 	return -EOPNOTSUPP;
 }
 
@@ -2463,7 +2463,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev)
 
 	udc->dev = &pdev->dev;
 	udc->mach = pdev->dev.platform_data;
-	udc->transceiver = otg_get_transceiver();
+	udc->transceiver = usb_get_transceiver();
 
 	gpio = udc->mach->gpio_pullup;
 	if (gpio_is_valid(gpio)) {
@@ -2542,7 +2542,7 @@ static int __exit pxa_udc_remove(struct platform_device *_dev)
 	if (gpio_is_valid(gpio))
 		gpio_free(gpio);
 
-	otg_put_transceiver(udc->transceiver);
+	usb_put_transceiver(udc->transceiver);
 
 	udc->transceiver = NULL;
 	platform_set_drvdata(_dev, NULL);

drivers/usb/gadget/s3c-hsudc.c

@@ -1243,7 +1243,7 @@ static int s3c_hsudc_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 		return -ENODEV;
 
 	if (hsudc->transceiver)
-		return otg_set_power(hsudc->transceiver, mA);
+		return usb_phy_set_power(hsudc->transceiver, mA);
 
 	return -EOPNOTSUPP;
 }
@@ -1275,7 +1275,7 @@ static int __devinit s3c_hsudc_probe(struct platform_device *pdev)
 	hsudc->dev = dev;
 	hsudc->pd = pdev->dev.platform_data;
 
-	hsudc->transceiver = otg_get_transceiver();
+	hsudc->transceiver = usb_get_transceiver();
 
 	for (i = 0; i < ARRAY_SIZE(hsudc->supplies); i++)
 		hsudc->supplies[i].supply = s3c_hsudc_supply_names[i];
@@ -1377,7 +1377,7 @@ err_remap:
 	release_mem_region(res->start, resource_size(res));
 err_res:
 	if (hsudc->transceiver)
-		otg_put_transceiver(hsudc->transceiver);
+		usb_put_transceiver(hsudc->transceiver);
 
 	regulator_bulk_free(ARRAY_SIZE(hsudc->supplies), hsudc->supplies);
 err_supplies:

drivers/usb/host/ehci-fsl.c

@@ -142,7 +142,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver,
 	if (pdata->operating_mode == FSL_USB2_DR_OTG) {
 		struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 
-		ehci->transceiver = otg_get_transceiver();
+		ehci->transceiver = usb_get_transceiver();
 		dev_dbg(&pdev->dev, "hcd=0x%p  ehci=0x%p, transceiver=0x%p\n",
 			hcd, ehci, ehci->transceiver);
 

drivers/usb/host/ehci-msm.c

@@ -32,7 +32,7 @@
 
 #define MSM_USB_BASE (hcd->regs)
 
-static struct usb_phy *otg;
+static struct usb_phy *phy;
 
 static int ehci_msm_reset(struct usb_hcd *hcd)
 {
@@ -145,14 +145,14 @@ static int ehci_msm_probe(struct platform_device *pdev)
 	 * powering up VBUS, mapping of registers address space and power
 	 * management.
 	 */
-	otg = otg_get_transceiver();
-	if (!otg) {
+	phy = usb_get_transceiver();
+	if (!phy) {
 		dev_err(&pdev->dev, "unable to find transceiver\n");
 		ret = -ENODEV;
 		goto unmap;
 	}
 
-	ret = otg_set_host(otg, &hcd->self);
+	ret = otg_set_host(phy, &hcd->self);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "unable to register with transceiver\n");
 		goto put_transceiver;
@@ -169,7 +169,7 @@ static int ehci_msm_probe(struct platform_device *pdev)
 	return 0;
 
 put_transceiver:
-	otg_put_transceiver(otg);
+	usb_put_transceiver(phy);
 unmap:
 	iounmap(hcd->regs);
 put_hcd:
@@ -186,8 +186,8 @@ static int __devexit ehci_msm_remove(struct platform_device *pdev)
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);
 
-	otg_set_host(otg, NULL);
-	otg_put_transceiver(otg);
+	otg_set_host(phy, NULL);
+	usb_put_transceiver(phy);
 
 	usb_put_hcd(hcd);
 

drivers/usb/host/ehci-mv.c

@@ -253,7 +253,7 @@ static int mv_ehci_probe(struct platform_device *pdev)
 	ehci_mv->mode = pdata->mode;
 	if (ehci_mv->mode == MV_USB_MODE_OTG) {
 #ifdef CONFIG_USB_OTG_UTILS
-		ehci_mv->otg = otg_get_transceiver();
+		ehci_mv->otg = usb_get_transceiver();
 		if (!ehci_mv->otg) {
 			dev_err(&pdev->dev,
 				"unable to find transceiver\n");
@@ -303,7 +303,7 @@ err_set_vbus:
 #ifdef CONFIG_USB_OTG_UTILS
 err_put_transceiver:
 	if (ehci_mv->otg)
-		otg_put_transceiver(ehci_mv->otg);
+		usb_put_transceiver(ehci_mv->otg);
 #endif
 err_disable_clk:
 	mv_ehci_disable(ehci_mv);
@@ -333,7 +333,7 @@ static int mv_ehci_remove(struct platform_device *pdev)
 
 	if (ehci_mv->otg) {
 		otg_set_host(ehci_mv->otg, NULL);
-		otg_put_transceiver(ehci_mv->otg);
+		usb_put_transceiver(ehci_mv->otg);
 	}
 
 	if (ehci_mv->mode == MV_USB_MODE_HOST) {

drivers/usb/host/ehci-mxc.c

@@ -220,7 +220,7 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 	/* Initialize the transceiver */
 	if (pdata->otg) {
 		pdata->otg->io_priv = hcd->regs + ULPI_VIEWPORT_OFFSET;
-		ret = otg_init(pdata->otg);
+		ret = usb_phy_init(pdata->otg);
 		if (ret) {
 			dev_err(dev, "unable to init transceiver, probably missing\n");
 			ret = -ENODEV;
@@ -247,9 +247,11 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev)
 		 * It's in violation of USB specs
 		 */
 		if (machine_is_mx51_efikamx() || machine_is_mx51_efikasb()) {
-			flags = otg_io_read(pdata->otg, ULPI_OTG_CTRL);
+			flags = usb_phy_io_read(pdata->otg,
+							ULPI_OTG_CTRL);
 			flags |= ULPI_OTG_CTRL_CHRGVBUS;
-			ret = otg_io_write(pdata->otg, flags, ULPI_OTG_CTRL);
+			ret = usb_phy_io_write(pdata->otg, flags,
+							ULPI_OTG_CTRL);
 			if (ret) {
 				dev_err(dev, "unable to set CHRVBUS\n");
 				goto err_add;
@@ -297,7 +299,7 @@ static int __exit ehci_mxc_drv_remove(struct platform_device *pdev)
 		pdata->exit(pdev);
 
 	if (pdata->otg)
-		otg_shutdown(pdata->otg);
+		usb_phy_shutdown(pdata->otg);
 
 	usb_remove_hcd(hcd);
 	iounmap(hcd->regs);

drivers/usb/host/ehci-tegra.c

@@ -733,7 +733,7 @@ static int tegra_ehci_probe(struct platform_device *pdev)
 
 #ifdef CONFIG_USB_OTG_UTILS
 	if (pdata->operating_mode == TEGRA_USB_OTG) {
-		tegra->transceiver = otg_get_transceiver();
+		tegra->transceiver = usb_get_transceiver();
 		if (tegra->transceiver)
 			otg_set_host(tegra->transceiver, &hcd->self);
 	}
@@ -751,7 +751,7 @@ fail:
 #ifdef CONFIG_USB_OTG_UTILS
 	if (tegra->transceiver) {
 		otg_set_host(tegra->transceiver, NULL);
-		otg_put_transceiver(tegra->transceiver);
+		usb_put_transceiver(tegra->transceiver);
 	}
 #endif
 	tegra_usb_phy_close(tegra->phy);
@@ -809,7 +809,7 @@ static int tegra_ehci_remove(struct platform_device *pdev)
 #ifdef CONFIG_USB_OTG_UTILS
 	if (tegra->transceiver) {
 		otg_set_host(tegra->transceiver, NULL);
-		otg_put_transceiver(tegra->transceiver);
+		usb_put_transceiver(tegra->transceiver);
 	}
 #endif
 

drivers/usb/host/ohci-omap.c

@@ -210,7 +210,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 
 #ifdef	CONFIG_USB_OTG
 	if (need_transceiver) {
-		ohci->transceiver = otg_get_transceiver();
+		ohci->transceiver = usb_get_transceiver();
 		if (ohci->transceiver) {
 			int	status = otg_set_host(ohci->transceiver,
 						&ohci_to_hcd(ohci)->self);

drivers/usb/musb/am35x.c

@@ -364,7 +364,7 @@ static int am35x_musb_init(struct musb *musb)
 		return -ENODEV;
 
 	usb_nop_xceiv_register();
-	musb->xceiv = otg_get_transceiver();
+	musb->xceiv = usb_get_transceiver();
 	if (!musb->xceiv)
 		return -ENODEV;
 
@@ -406,7 +406,7 @@ static int am35x_musb_exit(struct musb *musb)
 	if (data->set_phy_power)
 		data->set_phy_power(0);
 
-	otg_put_transceiver(musb->xceiv);
+	usb_put_transceiver(musb->xceiv);
 	usb_nop_xceiv_unregister();
 
 	return 0;

drivers/usb/musb/blackfin.c

@@ -415,7 +415,7 @@ static int bfin_musb_init(struct musb *musb)
 	gpio_direction_output(musb->config->gpio_vrsel, 0);
 
 	usb_nop_xceiv_register();
-	musb->xceiv = otg_get_transceiver();
+	musb->xceiv = usb_get_transceiver();
 	if (!musb->xceiv) {
 		gpio_free(musb->config->gpio_vrsel);
 		return -ENODEV;
@@ -440,7 +440,7 @@ static int bfin_musb_exit(struct musb *musb)
 {
 	gpio_free(musb->config->gpio_vrsel);
 
-	otg_put_transceiver(musb->xceiv);
+	usb_put_transceiver(musb->xceiv);
 	usb_nop_xceiv_unregister();
 	return 0;
 }

drivers/usb/musb/da8xx.c

@@ -425,7 +425,7 @@ static int da8xx_musb_init(struct musb *musb)
 		goto fail;
 
 	usb_nop_xceiv_register();
-	musb->xceiv = otg_get_transceiver();
+	musb->xceiv = usb_get_transceiver();
 	if (!musb->xceiv)
 		goto fail;
 
@@ -458,7 +458,7 @@ static int da8xx_musb_exit(struct musb *musb)
 
 	phy_off();
 
-	otg_put_transceiver(musb->xceiv);
+	usb_put_transceiver(musb->xceiv);
 	usb_nop_xceiv_unregister();
 
 	return 0;

drivers/usb/musb/davinci.c

@@ -384,7 +384,7 @@ static int davinci_musb_init(struct musb *musb)
 	u32		revision;
 
 	usb_nop_xceiv_register();
-	musb->xceiv = otg_get_transceiver();
+	musb->xceiv = usb_get_transceiver();
 	if (!musb->xceiv)
 		return -ENODEV;
 
@@ -443,7 +443,7 @@ static int davinci_musb_init(struct musb *musb)
 	return 0;
 
 fail:
-	otg_put_transceiver(musb->xceiv);
+	usb_put_transceiver(musb->xceiv);
 	usb_nop_xceiv_unregister();
 	return -ENODEV;
 }
@@ -492,7 +492,7 @@ static int davinci_musb_exit(struct musb *musb)
 
 	phy_off();
 
-	otg_put_transceiver(musb->xceiv);
+	usb_put_transceiver(musb->xceiv);
 	usb_nop_xceiv_unregister();
 
 	return 0;

drivers/usb/musb/musb_core.c

@@ -131,9 +131,9 @@ static inline struct musb *dev_to_musb(struct device *dev)
 /*-------------------------------------------------------------------------*/
 
 #ifndef CONFIG_BLACKFIN
-static int musb_ulpi_read(struct usb_phy *otg, u32 offset)
+static int musb_ulpi_read(struct usb_phy *phy, u32 offset)
 {
-	void __iomem *addr = otg->io_priv;
+	void __iomem *addr = phy->io_priv;
 	int	i = 0;
 	u8	r;
 	u8	power;
@@ -165,10 +165,9 @@ static int musb_ulpi_read(struct usb_phy *otg, u32 offset)
 	return musb_readb(addr, MUSB_ULPI_REG_DATA);
 }
 
-static int musb_ulpi_write(struct usb_phy *otg,
-		u32 offset, u32 data)
+static int musb_ulpi_write(struct usb_phy *phy, u32 offset, u32 data)
 {
-	void __iomem *addr = otg->io_priv;
+	void __iomem *addr = phy->io_priv;
 	int	i = 0;
 	u8	r = 0;
 	u8	power;
@@ -200,7 +199,7 @@ static int musb_ulpi_write(struct usb_phy *otg,
 #define musb_ulpi_write		NULL
 #endif
 
-static struct otg_io_access_ops musb_ulpi_access = {
+static struct usb_phy_io_ops musb_ulpi_access = {
 	.read = musb_ulpi_read,
 	.write = musb_ulpi_write,
 };

drivers/usb/musb/musb_gadget.c

@@ -1703,7 +1703,7 @@ static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 
 	if (!musb->xceiv->set_power)
 		return -EOPNOTSUPP;
-	return otg_set_power(musb->xceiv, mA);
+	return usb_phy_set_power(musb->xceiv, mA);
 }
 
 static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on)

drivers/usb/musb/omap2430.c

@@ -247,7 +247,7 @@ static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
 
 		if (!is_otg_enabled(musb) || musb->gadget_driver) {
 			pm_runtime_get_sync(musb->controller);
-			otg_init(musb->xceiv);
+			usb_phy_init(musb->xceiv);
 			omap2430_musb_set_vbus(musb, 1);
 		}
 		break;
@@ -257,7 +257,7 @@ static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
 
 		if (musb->gadget_driver)
 			pm_runtime_get_sync(musb->controller);
-		otg_init(musb->xceiv);
+		usb_phy_init(musb->xceiv);
 		break;
 
 	case USB_EVENT_NONE:
@@ -273,7 +273,7 @@ static void musb_otg_notifier_work(struct work_struct *data_notifier_work)
 			if (musb->xceiv->set_vbus)
 				otg_set_vbus(musb->xceiv, 0);
 		}
-		otg_shutdown(musb->xceiv);
+		usb_phy_shutdown(musb->xceiv);
 		break;
 	default:
 		dev_dbg(musb->controller, "ID float\n");
@@ -291,7 +291,7 @@ static int omap2430_musb_init(struct musb *musb)
 	 * up through ULPI.  TWL4030-family PMICs include one,
 	 * which needs a driver, drivers aren't always needed.
 	 */
-	musb->xceiv = otg_get_transceiver();
+	musb->xceiv = usb_get_transceiver();
 	if (!musb->xceiv) {
 		pr_err("HS USB OTG: no transceiver configured\n");
 		return -ENODEV;
@@ -326,7 +326,7 @@ static int omap2430_musb_init(struct musb *musb)
 			musb_readl(musb->mregs, OTG_SIMENABLE));
 
 	musb->nb.notifier_call = musb_otg_notifications;
-	status = otg_register_notifier(musb->xceiv, &musb->nb);
+	status = usb_register_notifier(musb->xceiv, &musb->nb);
 
 	if (status)
 		dev_dbg(musb->controller, "notification register failed\n");
@@ -350,7 +350,7 @@ static void omap2430_musb_enable(struct musb *musb)
 	switch (musb->xceiv->last_event) {
 
 	case USB_EVENT_ID:
-		otg_init(musb->xceiv);
+		usb_phy_init(musb->xceiv);
 		if (data->interface_type != MUSB_INTERFACE_UTMI)
 			break;
 		devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
@@ -369,7 +369,7 @@ static void omap2430_musb_enable(struct musb *musb)
 		break;
 
 	case USB_EVENT_VBUS:
-		otg_init(musb->xceiv);
+		usb_phy_init(musb->xceiv);
 		break;
 
 	default:
@@ -380,7 +380,7 @@ static void omap2430_musb_enable(struct musb *musb)
 static void omap2430_musb_disable(struct musb *musb)
 {
 	if (musb->xceiv->last_event)
-		otg_shutdown(musb->xceiv);
+		usb_phy_shutdown(musb->xceiv);
 }
 
 static int omap2430_musb_exit(struct musb *musb)
@@ -389,7 +389,7 @@ static int omap2430_musb_exit(struct musb *musb)
 	cancel_work_sync(&musb->otg_notifier_work);
 
 	omap2430_low_level_exit(musb);
-	otg_put_transceiver(musb->xceiv);
+	usb_put_transceiver(musb->xceiv);
 
 	return 0;
 }
@@ -495,7 +495,7 @@ static int omap2430_runtime_suspend(struct device *dev)
 						OTG_INTERFSEL);
 
 	omap2430_low_level_exit(musb);
-	otg_set_suspend(musb->xceiv, 1);
+	usb_phy_set_suspend(musb->xceiv, 1);
 
 	return 0;
 }
@@ -509,7 +509,7 @@ static int omap2430_runtime_resume(struct device *dev)
 	musb_writel(musb->mregs, OTG_INTERFSEL,
 					musb->context.otg_interfsel);
 
-	otg_set_suspend(musb->xceiv, 0);
+	usb_phy_set_suspend(musb->xceiv, 0);
 
 	return 0;
 }

drivers/usb/musb/tusb6010.c

@@ -1078,7 +1078,7 @@ static int tusb_musb_init(struct musb *musb)
 	int			ret;
 
 	usb_nop_xceiv_register();
-	musb->xceiv = otg_get_transceiver();
+	musb->xceiv = usb_get_transceiver();
 	if (!musb->xceiv)
 		return -ENODEV;
 
@@ -1130,7 +1130,7 @@ done:
 		if (sync)
 			iounmap(sync);
 
-		otg_put_transceiver(musb->xceiv);
+		usb_put_transceiver(musb->xceiv);
 		usb_nop_xceiv_unregister();
 	}
 	return ret;
@@ -1146,7 +1146,7 @@ static int tusb_musb_exit(struct musb *musb)
 
 	iounmap(musb->sync_va);
 
-	otg_put_transceiver(musb->xceiv);
+	usb_put_transceiver(musb->xceiv);
 	usb_nop_xceiv_unregister();
 	return 0;
 }

drivers/usb/musb/ux500.c

@@ -37,7 +37,7 @@ struct ux500_glue {
 
 static int ux500_musb_init(struct musb *musb)
 {
-	musb->xceiv = otg_get_transceiver();
+	musb->xceiv = usb_get_transceiver();
 	if (!musb->xceiv) {
 		pr_err("HS USB OTG: no transceiver configured\n");
 		return -ENODEV;
@@ -48,7 +48,7 @@ static int ux500_musb_init(struct musb *musb)
 
 static int ux500_musb_exit(struct musb *musb)
 {
-	otg_put_transceiver(musb->xceiv);
+	usb_put_transceiver(musb->xceiv);
 
 	return 0;
 }
@@ -160,7 +160,7 @@ static int ux500_suspend(struct device *dev)
 	struct ux500_glue	*glue = dev_get_drvdata(dev);
 	struct musb		*musb = glue_to_musb(glue);
 
-	otg_set_suspend(musb->xceiv, 1);
+	usb_phy_set_suspend(musb->xceiv, 1);
 	clk_disable(glue->clk);
 
 	return 0;
@@ -178,7 +178,7 @@ static int ux500_resume(struct device *dev)
 		return ret;
 	}
 
-	otg_set_suspend(musb->xceiv, 0);
+	usb_phy_set_suspend(musb->xceiv, 0);
 
 	return 0;
 }