brcm80211: smac: replace own access category definitions with mac80211 enum

The brcmsmac had own definitions for the access categories. The mac80211
header provides these as well as they are used in the conf_tx callback.
As the definitions did not match the driver configured the tx parameters
to the wrong queue.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Alwin Beukers <alwin@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/brcm80211/brcmsmac/main.c

@@ -109,11 +109,6 @@
 #define BPHY_PLCP_TIME			192
 #define RIFS_11N_TIME			2
 
-#define AC_BE				0
-#define AC_BK				1
-#define AC_VI				2
-#define AC_VO				3
-
 /* length of the BCN template area */
 #define BCN_TMPL_LEN			512
 
@@ -305,10 +300,22 @@ uint brcm_msg_level =
 #endif				/* BCMDBG */
 
 /* TX FIFO number to WME/802.1E Access Category */
-static const u8 wme_fifo2ac[] = { AC_BK, AC_BE, AC_VI, AC_VO, AC_BE, AC_BE };
+static const u8 wme_fifo2ac[] = {
+	IEEE80211_AC_BK,
+	IEEE80211_AC_BE,
+	IEEE80211_AC_VI,
+	IEEE80211_AC_VO,
+	IEEE80211_AC_BE,
+	IEEE80211_AC_BE
+};
 
-/* WME/802.1E Access Category to TX FIFO number */
-static const u8 wme_ac2fifo[] = { 1, 0, 2, 3 };
+/* ieee80211 Access Category to TX FIFO number */
+static const u8 wme_ac2fifo[] = {
+	TX_AC_VO_FIFO,
+	TX_AC_VI_FIFO,
+	TX_AC_BE_FIFO,
+	TX_AC_BK_FIFO
+};
 
 /* 802.1D Priority to precedence queue mapping */
 const u8 wlc_prio2prec_map[] = {
@@ -893,7 +900,7 @@ brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs)
 		    lfbl,	/* Long Frame Rate Fallback Limit */
 		    fbl;
 
-		if (queue < AC_COUNT) {
+		if (queue < IEEE80211_NUM_ACS) {
 			sfbl = GFIELD(wlc->wme_retries[wme_fifo2ac[queue]],
 				      EDCF_SFB);
 			lfbl = GFIELD(wlc->wme_retries[wme_fifo2ac[queue]],
@@ -4125,7 +4132,7 @@ void brcms_c_wme_setparams(struct brcms_c_info *wlc, u16 aci,
 	    EDCF_TXOP2USEC(acp_shm.txop);
 	acp_shm.aifs = (params->aifs & EDCF_AIFSN_MASK);
 
-	if (aci == AC_VI && acp_shm.txop == 0
+	if (aci == IEEE80211_AC_VI && acp_shm.txop == 0
 	    && acp_shm.aifs < EDCF_AIFSN_MAX)
 		acp_shm.aifs++;
 
@@ -4175,7 +4182,7 @@ static void brcms_c_edcf_setparams(struct brcms_c_info *wlc, bool suspend)
 	}; /* ucode needs these parameters during its initialization */
 	const struct edcf_acparam *edcf_acp = &default_edcf_acparams[0];
 
-	for (i_ac = 0; i_ac < AC_COUNT; i_ac++, edcf_acp++) {
+	for (i_ac = 0; i_ac < IEEE80211_NUM_ACS; i_ac++, edcf_acp++) {
 		/* find out which ac this set of params applies to */
 		aci = (edcf_acp->ACI & EDCF_ACI_MASK) >> EDCF_ACI_SHIFT;
 
@@ -5172,7 +5179,7 @@ static void brcms_c_wme_retries_write(struct brcms_c_info *wlc)
 	if (!wlc->clk)
 		return;
 
-	for (ac = 0; ac < AC_COUNT; ac++)
+	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
 		brcms_b_write_shm(wlc->hw, M_AC_TXLMT_ADDR(ac),
 				  wlc->wme_retries[ac]);
 }
@@ -5647,7 +5654,7 @@ int brcms_c_set_rate_limit(struct brcms_c_info *wlc, u16 srl, u16 lrl)
 
 	brcms_b_retrylimit_upd(wlc->hw, wlc->SRL, wlc->LRL);
 
-	for (ac = 0; ac < AC_COUNT; ac++) {
+	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
 		wlc->wme_retries[ac] =	SFIELD(wlc->wme_retries[ac],
 					       EDCF_SHORT,  wlc->SRL);
 		wlc->wme_retries[ac] =	SFIELD(wlc->wme_retries[ac],
@@ -8358,7 +8365,7 @@ void brcms_c_init(struct brcms_c_info *wlc, bool mute_tx)
 		/* Uninitialized; read from HW */
 		int ac;
 
-		for (ac = 0; ac < AC_COUNT; ac++)
+		for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
 			wlc->wme_retries[ac] =
 			    brcms_b_read_shm(wlc->hw, M_AC_TXLMT_ADDR(ac));
 	}

drivers/net/wireless/brcm80211/brcmsmac/main.h

@@ -44,8 +44,6 @@
 /* transmit buffer max headroom for protocol headers */
 #define TXOFF (D11_TXH_LEN + D11_PHY_HDR_LEN)
 
-#define AC_COUNT		4
-
 /* Macros for doing definition and get/set of bitfields
  * Usage example, e.g. a three-bit field (bits 4-6):
  *    #define <NAME>_M	BITFIELD_MASK(3)
@@ -436,7 +434,7 @@ struct brcms_txq_info {
  * bcn_li_dtim: beacon listen interval in # dtims.
  * WDarmed: watchdog timer is armed.
  * WDlast: last time wlc_watchdog() was called.
- * edcf_txop[AC_COUNT]: current txop for each ac.
+ * edcf_txop[IEEE80211_NUM_ACS]: current txop for each ac.
  * wme_retries: per-AC retry limits.
  * tx_prec_map: Precedence map based on HW FIFO space.
  * fifo2prec_map[NFIFO]: pointer to fifo2_prec map based on WME.
@@ -535,9 +533,9 @@ struct brcms_c_info {
 	u32 WDlast;
 
 	/* WME */
-	u16 edcf_txop[AC_COUNT];
+	u16 edcf_txop[IEEE80211_NUM_ACS];
 
-	u16 wme_retries[AC_COUNT];
+	u16 wme_retries[IEEE80211_NUM_ACS];
 	u16 tx_prec_map;
 	u16 fifo2prec_map[NFIFO];