Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP3: serial - fix bug introduced in
  mfd: twl: fix twl4030 rename for remaining driver, board files
  USB ehci: replace mach header with plat
  omap3: Allow EHCI to be built on OMAP3

arch/arm/mach-omap2/Kconfig

@@ -18,6 +18,7 @@ config ARCH_OMAP2430
 config ARCH_OMAP34XX
 	bool "OMAP34xx Based System"
 	depends on ARCH_OMAP3
+	select USB_ARCH_HAS_EHCI
 
 config ARCH_OMAP3430
 	bool "OMAP3430 support"

arch/arm/mach-omap2/board-cm-t35.c

@@ -29,7 +29,7 @@
 #include <linux/gpio.h>
 
 #include <linux/i2c/at24.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>

arch/arm/mach-omap2/board-igep0020.c

@@ -19,7 +19,7 @@
 #include <linux/interrupt.h>
 
 #include <linux/regulator/machine.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-omap2/board-omap3evm.c

@@ -26,7 +26,7 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/usb/otg.h>
 #include <linux/smsc911x.h>
 

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -34,7 +34,7 @@
 #include <linux/spi/ads7846.h>
 
 #include <linux/regulator/machine.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -16,7 +16,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/wl12xx.h>
 #include <linux/i2c.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/regulator/machine.h>

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -14,7 +14,7 @@
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>

arch/arm/mach-omap2/serial.c

@@ -640,12 +640,9 @@ void __init omap_serial_early_init(void)
 		uart->num = i;
 		p->private_data = uart;
 		uart->p = p;
-		list_add_tail(&uart->node, &uart_list);
 
 		if (cpu_is_omap44xx())
 			p->irq += 32;
-
-		omap_uart_enable_clocks(uart);
 	}
 }
 
@@ -673,9 +670,13 @@ void __init omap_serial_init_port(int port)
 	pdev = &uart->pdev;
 	dev = &pdev->dev;
 
+	omap_uart_enable_clocks(uart);
+
 	omap_uart_reset(uart);
 	omap_uart_idle_init(uart);
 
+	list_add_tail(&uart->node, &uart_list);
+
 	if (WARN_ON(platform_device_register(pdev)))
 		return;
 

drivers/usb/host/ehci-omap.c

@@ -37,7 +37,7 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/gpio.h>
-#include <mach/usb.h>
+#include <plat/usb.h>
 
 /*
  * OMAP USBHOST Register addresses: VIRTUAL ADDRESSES

drivers/video/omap/lcd_ldp.c

@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #include <mach/gpio.h>
 #include <plat/mux.h>
@@ -59,7 +59,7 @@
 #define TWL4030_VPLL2_DEV_GRP           0x33
 #define TWL4030_VPLL2_DEDICATED         0x36
 
-#define t2_out(c, r, v) twl4030_i2c_write_u8(c, r, v)
+#define t2_out(c, r, v) twl_i2c_write_u8(c, r, v)
 
 
 static int ldp_panel_init(struct lcd_panel *panel,

drivers/video/omap/lcd_omap2evm.c

@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #include <plat/mux.h>
 #include <asm/mach-types.h>
@@ -61,9 +61,9 @@ static int omap2evm_panel_init(struct lcd_panel *panel,
 	gpio_direction_output(LCD_PANEL_LR, 1);
 	gpio_direction_output(LCD_PANEL_UD, 1);
 
-	twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN);
-	twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON);
-	twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF);
+	twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN);
+	twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON);
+	twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF);
 	bklight_level = 100;
 
 	return 0;
@@ -101,7 +101,7 @@ static int omap2evm_bklight_setlevel(struct lcd_panel *panel,
 	u8 c;
 	if ((level >= 0) && (level <= 100)) {
 		c = (125 * (100 - level)) / 100 + 2;
-		twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF);
+		twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF);
 		bklight_level = level;
 	}
 	return 0;

drivers/video/omap/lcd_omap3beagle.c

@@ -23,7 +23,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #include <plat/mux.h>
 #include <plat/mux.h>

drivers/video/omap/lcd_omap3evm.c

@@ -23,7 +23,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #include <plat/mux.h>
 #include <asm/mach-types.h>
@@ -63,9 +63,9 @@ static int omap3evm_panel_init(struct lcd_panel *panel,
 	gpio_direction_output(LCD_PANEL_LR, 1);
 	gpio_direction_output(LCD_PANEL_UD, 1);
 
-	twl4030_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN);
-	twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON);
-	twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF);
+	twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN);
+	twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON);
+	twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF);
 	bklight_level = 100;
 
 	return 0;
@@ -102,7 +102,7 @@ static int omap3evm_bklight_setlevel(struct lcd_panel *panel,
 	u8 c;
 	if ((level >= 0) && (level <= 100)) {
 		c = (125 * (100 - level)) / 100 + 2;
-		twl4030_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF);
+		twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF);
 		bklight_level = level;
 	}
 	return 0;

drivers/video/omap/lcd_overo.c

@@ -21,7 +21,7 @@
 
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #include <mach/gpio.h>
 #include <plat/mux.h>

sound/soc/omap/sdp3430.c

@@ -24,7 +24,7 @@
 
 #include <linux/clk.h>
 #include <linux/platform_device.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
 #include <sound/soc.h>
@@ -321,11 +321,11 @@ static int __init sdp3430_soc_init(void)
 	*(unsigned int *)sdp3430_dai[1].cpu_dai->private_data = 2; /* McBSP3 */
 
 	/* Set TWL4030 GPIO6 as EXTMUTE signal */
-	twl4030_i2c_read_u8(TWL4030_MODULE_INTBR, &pin_mux,
+	twl_i2c_read_u8(TWL4030_MODULE_INTBR, &pin_mux,
 						TWL4030_INTBR_PMBR1);
 	pin_mux &= ~TWL4030_GPIO6_PWM0_MUTE(0x03);
 	pin_mux |= TWL4030_GPIO6_PWM0_MUTE(0x02);
-	twl4030_i2c_write_u8(TWL4030_MODULE_INTBR, pin_mux,
+	twl_i2c_write_u8(TWL4030_MODULE_INTBR, pin_mux,
 						TWL4030_INTBR_PMBR1);
 
 	ret = platform_device_add(sdp3430_snd_device);