Merge tag 'v3.12-rc2' into drm-intel-next

Backmerge Linux 3.12-rc2 to prep for a bunch of -next patches:
- Header cleanup in intel_drv.h, both changed in -fixes and my current
  -next pile.
- Cursor handling cleanup for -next which depends upon the cursor
  handling fix merged into -rc2.

All just trivial conflicts of the "changed adjacent lines" type:
	drivers/gpu/drm/i915/i915_gem.c
	drivers/gpu/drm/i915/intel_display.c
	drivers/gpu/drm/i915/intel_drv.h

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

CREDITS

@@ -637,14 +637,13 @@ S: 14509 NE 39th Street #1096
 S: Bellevue, Washington 98007
 S: USA
 
-N: Christopher L. Cheney
-E: ccheney@debian.org
-E: ccheney@cheney.cx
-W: http://www.cheney.cx
+N: Chris Cheney
+E: chris.cheney@gmail.com
+E: ccheney@redhat.com
 P: 1024D/8E384AF2 2D31 1927 87D7 1F24 9FF9  1BC5 D106 5AB3 8E38 4AF2
 D: Vista Imaging usb webcam driver
-S: 314 Prince of Wales
-S: Conroe, TX 77304
+S: 2308 Therrell Way
+S: McKinney, TX 75070
 S: USA
 
 N: Stuart Cheshire
@@ -1120,6 +1119,7 @@ D: author of userfs filesystem
 D: Improved mmap and munmap handling
 D: General mm minor tidyups
 D: autofs v4 maintainer
+D: Xen subsystem
 S: 987 Alabama St
 S: San Francisco
 S: CA, 94110

Documentation/00-INDEX

@@ -40,7 +40,7 @@ IPMI.txt
 IRQ-affinity.txt
 	- how to select which CPU(s) handle which interrupt events on SMP.
 IRQ-domain.txt
-	- info on inerrupt numbering and setting up IRQ domains.
+	- info on interrupt numbering and setting up IRQ domains.
 IRQ.txt
 	- description of what an IRQ is.
 Intel-IOMMU.txt

Documentation/ABI/stable/sysfs-bus-usb

@@ -0,0 +1,142 @@
+What:		/sys/bus/usb/devices/.../power/persist
+Date:		May 2007
+KernelVersion:	2.6.23
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		If CONFIG_USB_PERSIST is set, then each USB device directory
+		will contain a file named power/persist.  The file holds a
+		boolean value (0 or 1) indicating whether or not the
+		"USB-Persist" facility is enabled for the device.  Since the
+		facility is inherently dangerous, it is disabled by default
+		for all devices except hubs.  For more information, see
+		Documentation/usb/persist.txt.
+
+What:		/sys/bus/usb/devices/.../power/autosuspend
+Date:		March 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		Each USB device directory will contain a file named
+		power/autosuspend.  This file holds the time (in seconds)
+		the device must be idle before it will be autosuspended.
+		0 means the device will be autosuspended as soon as
+		possible.  Negative values will prevent the device from
+		being autosuspended at all, and writing a negative value
+		will resume the device if it is already suspended.
+
+		The autosuspend delay for newly-created devices is set to
+		the value of the usbcore.autosuspend module parameter.
+
+What:		/sys/bus/usb/device/.../power/connected_duration
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		If CONFIG_PM_RUNTIME is enabled then this file
+		is present.  When read, it returns the total time (in msec)
+		that the USB device has been connected to the machine.  This
+		file is read-only.
+Users:
+		PowerTOP <power@bughost.org>
+		http://www.lesswatts.org/projects/powertop/
+
+What:		/sys/bus/usb/device/.../power/active_duration
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		If CONFIG_PM_RUNTIME is enabled then this file
+		is present.  When read, it returns the total time (in msec)
+		that the USB device has been active, i.e. not in a suspended
+		state.  This file is read-only.
+
+		Tools can use this file and the connected_duration file to
+		compute the percentage of time that a device has been active.
+		For example,
+		echo $((100 * `cat active_duration` / `cat connected_duration`))
+		will give an integer percentage.  Note that this does not
+		account for counter wrap.
+Users:
+		PowerTOP <power@bughost.org>
+		http://www.lesswatts.org/projects/powertop/
+
+What:		/sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
+Date:		January 2008
+KernelVersion:	2.6.27
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		When read, this file returns 1 if the interface driver
+		for this interface supports autosuspend.  It also
+		returns 1 if no driver has claimed this interface, as an
+		unclaimed interface will not stop the device from being
+		autosuspended if all other interface drivers are idle.
+		The file returns 0 if autosuspend support has not been
+		added to the driver.
+Users:
+		USB PM tool
+		git://git.moblin.org/users/sarah/usb-pm-tool/
+
+What:		/sys/bus/usb/device/.../avoid_reset_quirk
+Date:		December 2009
+Contact:	Oliver Neukum <oliver@neukum.org>
+Description:
+		Writing 1 to this file tells the kernel that this
+		device will morph into another mode when it is reset.
+		Drivers will not use reset for error handling for
+		such devices.
+Users:
+		usb_modeswitch
+
+What:		/sys/bus/usb/devices/.../devnum
+KernelVersion:	since at least 2.6.18
+Description:
+		Device address on the USB bus.
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../bConfigurationValue
+KernelVersion:	since at least 2.6.18
+Description:
+		bConfigurationValue of the *active* configuration for the
+		device. Writing 0 or -1 to bConfigurationValue will reset the
+		active configuration (unconfigure the device). Writing
+		another value will change the active configuration.
+
+		Note that some devices, in violation of the USB spec, have a
+		configuration with a value equal to 0. Writing 0 to
+		bConfigurationValue for these devices will install that
+		configuration, rather then unconfigure the device.
+
+		Writing -1 will always unconfigure the device.
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../busnum
+KernelVersion:	2.6.22
+Description:
+		Bus-number of the USB-bus the device is connected to.
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../descriptors
+KernelVersion:	2.6.26
+Description:
+		Binary file containing cached descriptors of the device. The
+		binary data consists of the device descriptor followed by the
+		descriptors for each configuration of the device.
+		Note that the wTotalLength of the config descriptors can not
+		be trusted, as the device may have a smaller config descriptor
+		than it advertises. The bLength field of each (sub) descriptor
+		can be trusted, and can be used to seek forward one (sub)
+		descriptor at a time until the next config descriptor is found.
+		All descriptors read from this file are in bus-endian format
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../speed
+KernelVersion:	since at least 2.6.18
+Description:
+		Speed the device is connected with to the usb-host in
+		Mbit / second. IE one of 1.5 / 12 / 480 / 5000.
+Users:
+		libusb

Documentation/ABI/testing/sysfs-block-zram

@@ -5,20 +5,21 @@ Description:
 		The disksize file is read-write and specifies the disk size
 		which represents the limit on the *uncompressed* worth of data
 		that can be stored in this disk.
+		Unit: bytes
 
 What:		/sys/block/zram<id>/initstate
 Date:		August 2010
 Contact:	Nitin Gupta <ngupta@vflare.org>
 Description:
-		The disksize file is read-only and shows the initialization
+		The initstate file is read-only and shows the initialization
 		state of the device.
 
 What:		/sys/block/zram<id>/reset
 Date:		August 2010
 Contact:	Nitin Gupta <ngupta@vflare.org>
 Description:
-		The disksize file is write-only and allows resetting the
-		device. The reset operation frees all the memory assocaited
+		The reset file is write-only and allows resetting the
+		device. The reset operation frees all the memory associated
 		with this device.
 
 What:		/sys/block/zram<id>/num_reads
@@ -48,7 +49,7 @@ Contact:	Nitin Gupta <ngupta@vflare.org>
 Description:
 		The notify_free file is read-only and specifies the number of
 		swap slot free notifications received by this device. These
-		notifications are send to a swap block device when a swap slot
+		notifications are sent to a swap block device when a swap slot
 		is freed. This statistic is applicable only when this disk is
 		being used as a swap disk.
 

Documentation/ABI/testing/sysfs-bus-iio

@@ -351,6 +351,7 @@ Description:
 		6kohm_to_gnd: connected to ground via a 6kOhm resistor,
 		20kohm_to_gnd: connected to ground via a 20kOhm resistor,
 		100kohm_to_gnd: connected to ground via an 100kOhm resistor,
+		500kohm_to_gnd: connected to ground via a 500kOhm resistor,
 		three_state: left floating.
 		For a list of available output power down options read
 		outX_powerdown_mode_available. If Y is not present the
@@ -792,3 +793,21 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		This attribute is used to read the amount of quadrature error
 		present in the device at a given time.
+
+What:		/sys/.../iio:deviceX/in_accelX_power_mode
+KernelVersion:	3.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Specifies the chip power mode.
+		low_noise: reduce noise level from ADC,
+		low_power: enable low current consumption.
+		For a list of available output power modes read
+		in_accel_power_mode_available.
+
+What:		/sys/bus/iio/devices/iio:deviceX/store_eeprom
+KernelVersion:	3.4.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Writing '1' stores the current device configuration into
+		on-chip EEPROM. After power-up or chip reset the device will
+		automatically load the saved configuration.

Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523

@@ -18,14 +18,6 @@ Description:
 		Reading returns either '1' or '0'. '1' means that the
 		pllY is locked.
 
-What:		/sys/bus/iio/devices/iio:deviceX/store_eeprom
-KernelVersion:	3.4.0
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Writing '1' stores the current device configuration into
-		on-chip EEPROM. After power-up or chip reset the device will
-		automatically load the saved configuration.
-
 What:		/sys/bus/iio/devices/iio:deviceX/sync_dividers
 KernelVersion:	3.4.0
 Contact:	linux-iio@vger.kernel.org

Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350

@@ -18,4 +18,4 @@ Description:
 		adjust the reference frequency accordingly.
 		The value written has no effect until out_altvoltageY_frequency
 		is updated. Consider to use out_altvoltageY_powerdown to power
-		down the PLL and it's RFOut buffers during REFin changes.
+		down the PLL and its RFOut buffers during REFin changes.

Documentation/ABI/testing/sysfs-bus-usb

@@ -1,81 +1,3 @@
-What:		/sys/bus/usb/devices/.../power/autosuspend
-Date:		March 2007
-KernelVersion:	2.6.21
-Contact:	Alan Stern <stern@rowland.harvard.edu>
-Description:
-		Each USB device directory will contain a file named
-		power/autosuspend.  This file holds the time (in seconds)
-		the device must be idle before it will be autosuspended.
-		0 means the device will be autosuspended as soon as
-		possible.  Negative values will prevent the device from
-		being autosuspended at all, and writing a negative value
-		will resume the device if it is already suspended.
-
-		The autosuspend delay for newly-created devices is set to
-		the value of the usbcore.autosuspend module parameter.
-
-What:		/sys/bus/usb/devices/.../power/persist
-Date:		May 2007
-KernelVersion:	2.6.23
-Contact:	Alan Stern <stern@rowland.harvard.edu>
-Description:
-		If CONFIG_USB_PERSIST is set, then each USB device directory
-		will contain a file named power/persist.  The file holds a
-		boolean value (0 or 1) indicating whether or not the
-		"USB-Persist" facility is enabled for the device.  Since the
-		facility is inherently dangerous, it is disabled by default
-		for all devices except hubs.  For more information, see
-		Documentation/usb/persist.txt.
-
-What:		/sys/bus/usb/device/.../power/connected_duration
-Date:		January 2008
-KernelVersion:	2.6.25
-Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
-Description:
-		If CONFIG_PM_RUNTIME is enabled then this file
-		is present.  When read, it returns the total time (in msec)
-		that the USB device has been connected to the machine.  This
-		file is read-only.
-Users:
-		PowerTOP <power@bughost.org>
-		http://www.lesswatts.org/projects/powertop/
-
-What:		/sys/bus/usb/device/.../power/active_duration
-Date:		January 2008
-KernelVersion:	2.6.25
-Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
-Description:
-		If CONFIG_PM_RUNTIME is enabled then this file
-		is present.  When read, it returns the total time (in msec)
-		that the USB device has been active, i.e. not in a suspended
-		state.  This file is read-only.
-
-		Tools can use this file and the connected_duration file to
-		compute the percentage of time that a device has been active.
-		For example,
-		echo $((100 * `cat active_duration` / `cat connected_duration`))
-		will give an integer percentage.  Note that this does not
-		account for counter wrap.
-Users:
-		PowerTOP <power@bughost.org>
-		http://www.lesswatts.org/projects/powertop/
-
-What:		/sys/bus/usb/device/<busnum>-<devnum>...:<config num>-<interface num>/supports_autosuspend
-Date:		January 2008
-KernelVersion:	2.6.27
-Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
-Description:
-		When read, this file returns 1 if the interface driver
-		for this interface supports autosuspend.  It also
-		returns 1 if no driver has claimed this interface, as an
-		unclaimed interface will not stop the device from being
-		autosuspended if all other interface drivers are idle.
-		The file returns 0 if autosuspend support has not been
-		added to the driver.
-Users:
-		USB PM tool
-		git://git.moblin.org/users/sarah/usb-pm-tool/
-
 What:		/sys/bus/usb/device/.../authorized
 Date:		July 2008
 KernelVersion:	2.6.26
@@ -172,17 +94,6 @@ Description:
 		device IDs, exactly like reading from the entry
 		"/sys/bus/usb/drivers/.../new_id"
 
-What:		/sys/bus/usb/device/.../avoid_reset_quirk
-Date:		December 2009
-Contact:	Oliver Neukum <oliver@neukum.org>
-Description:
-		Writing 1 to this file tells the kernel that this
-		device will morph into another mode when it is reset.
-		Drivers will not use reset for error handling for
-		such devices.
-Users:
-		usb_modeswitch
-
 What:		/sys/bus/usb/devices/.../power/usb2_hardware_lpm
 Date:		September 2011
 Contact:	Andiry Xu <andiry.xu@amd.com>

Documentation/ABI/testing/sysfs-class-mtd

@@ -128,9 +128,8 @@ KernelVersion:	3.4
 Contact:	linux-mtd@lists.infradead.org
 Description:
 		Maximum number of bit errors that the device is capable of
-		correcting within each region covering an ecc step.  This will
-		always be a non-negative integer.  Note that some devices will
-		have multiple ecc steps within each writesize region.
+		correcting within each region covering an ECC step (see
+		ecc_step_size).  This will always be a non-negative integer.
 
 		In the case of devices lacking any ECC capability, it is 0.
 
@@ -173,3 +172,15 @@ Description:
 		This is generally applicable only to NAND flash devices with ECC
 		capability.  It is ignored on devices lacking ECC capability;
 		i.e., devices for which ecc_strength is zero.
+
+What:		/sys/class/mtd/mtdX/ecc_step_size
+Date:		May 2013
+KernelVersion:	3.10
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The size of a single region covered by ECC, known as the ECC
+		step.  Devices may have several equally sized ECC steps within
+		each writesize region.
+
+		It will always be a non-negative integer.  In the case of
+		devices lacking any ECC capability, it is 0.

Documentation/ABI/testing/sysfs-fs-f2fs

@@ -0,0 +1,26 @@
+What:		/sys/fs/f2fs/<disk>/gc_max_sleep_time
+Date:		July 2013
+Contact:	"Namjae Jeon" <namjae.jeon@samsung.com>
+Description:
+		 Controls the maximun sleep time for gc_thread. Time
+		 is in milliseconds.
+
+What:		/sys/fs/f2fs/<disk>/gc_min_sleep_time
+Date:		July 2013
+Contact:	"Namjae Jeon" <namjae.jeon@samsung.com>
+Description:
+		 Controls the minimum sleep time for gc_thread. Time
+		 is in milliseconds.
+
+What:		/sys/fs/f2fs/<disk>/gc_no_gc_sleep_time
+Date:		July 2013
+Contact:	"Namjae Jeon" <namjae.jeon@samsung.com>
+Description:
+		 Controls the default sleep time for gc_thread. Time
+		 is in milliseconds.
+
+What:		/sys/fs/f2fs/<disk>/gc_idle
+Date:		July 2013
+Contact:	"Namjae Jeon" <namjae.jeon@samsung.com>
+Description:
+		 Controls the victim selection policy for garbage collection.

Documentation/DocBook/80211.tmpl

@@ -325,6 +325,7 @@
           <title>functions/definitions</title>
 !Finclude/net/mac80211.h ieee80211_rx_status
 !Finclude/net/mac80211.h mac80211_rx_flags
+!Finclude/net/mac80211.h mac80211_tx_info_flags
 !Finclude/net/mac80211.h mac80211_tx_control_flags
 !Finclude/net/mac80211.h mac80211_rate_control_flags
 !Finclude/net/mac80211.h ieee80211_tx_rate

Documentation/DocBook/media/v4l/controls.xml

@@ -722,17 +722,22 @@ for more details.</para>
     </section>
 
     <section id="mpeg-controls">
-      <title>MPEG Control Reference</title>
+      <title>Codec Control Reference</title>
 
-      <para>Below all controls within the MPEG control class are
+      <para>Below all controls within the Codec control class are
 described. First the generic controls, then controls specific for
 certain hardware.</para>
 
+      <para>Note: These controls are applicable to all codecs and
+not just MPEG. The defines are prefixed with V4L2_CID_MPEG/V4L2_MPEG
+as the controls were originally made for MPEG codecs and later
+extended to cover all encoding formats.</para>
+
       <section>
-	<title>Generic MPEG Controls</title>
+	<title>Generic Codec Controls</title>
 
 	<table pgwide="1" frame="none" id="mpeg-control-id">
-	  <title>MPEG Control IDs</title>
+	  <title>Codec Control IDs</title>
 	  <tgroup cols="4">
 	    <colspec colname="c1" colwidth="1*" />
 	    <colspec colname="c2" colwidth="6*" />
@@ -752,7 +757,7 @@ certain hardware.</para>
 	      <row>
 		<entry spanname="id"><constant>V4L2_CID_MPEG_CLASS</constant>&nbsp;</entry>
 		<entry>class</entry>
-	      </row><row><entry spanname="descr">The MPEG class
+	      </row><row><entry spanname="descr">The Codec class
 descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a
 description of this control class. This description can be used as the
 caption of a Tab page in a GUI, for example.</entry>
@@ -3009,6 +3014,159 @@ in by the application. 0 = do not insert, 1 = insert packets.</entry>
 	  </tgroup>
 	</table>
       </section>
+
+    <section>
+      <title>VPX Control Reference</title>
+
+      <para>The VPX controls include controls for encoding parameters
+      of VPx video codec.</para>
+
+      <table pgwide="1" frame="none" id="vpx-control-id">
+      <title>VPX Control IDs</title>
+
+      <tgroup cols="4">
+        <colspec colname="c1" colwidth="1*" />
+        <colspec colname="c2" colwidth="6*" />
+        <colspec colname="c3" colwidth="2*" />
+        <colspec colname="c4" colwidth="6*" />
+        <spanspec namest="c1" nameend="c2" spanname="id" />
+        <spanspec namest="c2" nameend="c4" spanname="descr" />
+        <thead>
+          <row>
+            <entry spanname="id" align="left">ID</entry>
+            <entry align="left">Type</entry>
+          </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry>
+          </row>
+        </thead>
+        <tbody valign="top">
+          <row><entry></entry></row>
+
+	      <row><entry></entry></row>
+	      <row id="v4l2-vpx-num-partitions">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_NUM_PARTITIONS</constant></entry>
+		<entry>enum v4l2_vp8_num_partitions</entry>
+	      </row>
+	      <row><entry spanname="descr">The number of token partitions to use in VP8 encoder.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_1_PARTITION</constant></entry>
+		      <entry>1 coefficient partition</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_2_PARTITIONS</constant></entry>
+		      <entry>2 coefficient partitions</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_4_PARTITIONS</constant></entry>
+		      <entry>4 coefficient partitions</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_8_PARTITIONS</constant></entry>
+		      <entry>8 coefficient partitions</entry>
+	            </row>
+                  </tbody>
+		</entrytbl>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_IMD_DISABLE_4X4</constant></entry>
+		<entry>boolean</entry>
+	      </row>
+	      <row><entry spanname="descr">Setting this prevents intra 4x4 mode in the intra mode decision.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row id="v4l2-vpx-num-ref-frames">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_NUM_REF_FRAMES</constant></entry>
+		<entry>enum v4l2_vp8_num_ref_frames</entry>
+	      </row>
+	      <row><entry spanname="descr">The number of reference pictures for encoding P frames.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_1_REF_FRAME</constant></entry>
+		      <entry>Last encoded frame will be searched</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_2_REF_FRAME</constant></entry>
+		      <entry>Two frames will be searched among the last encoded frame, the golden frame
+and the alternate reference (altref) frame. The encoder implementation will decide which two are chosen.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_3_REF_FRAME</constant></entry>
+		      <entry>The last encoded frame, the golden frame and the altref frame will be searched.</entry>
+		    </row>
+                  </tbody>
+		</entrytbl>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_FILTER_LEVEL</constant></entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Indicates the loop filter level. The adjustment of the loop
+filter level is done via a delta value against a baseline loop filter value.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_FILTER_SHARPNESS</constant></entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">This parameter affects the loop filter. Anything above
+zero weakens the deblocking effect on the loop filter.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row>
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD</constant></entry>
+		<entry>integer</entry>
+	      </row>
+	      <row><entry spanname="descr">Sets the refresh period for the golden frame. The period is defined
+in number of frames. For a value of 'n', every nth frame starting from the first key frame will be taken as a golden frame.
+For eg. for encoding sequence of 0, 1, 2, 3, 4, 5, 6, 7 where the golden frame refresh period is set as 4, the frames
+0, 4, 8 etc will be taken as the golden frames as frame 0 is always a key frame.</entry>
+	      </row>
+
+	      <row><entry></entry></row>
+	      <row id="v4l2-vpx-golden-frame-sel">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_SEL</constant></entry>
+		<entry>enum v4l2_vp8_golden_frame_sel</entry>
+	      </row>
+	      <row><entry spanname="descr">Selects the golden frame for encoding.
+Possible values are:</entry>
+	      </row>
+	      <row>
+		<entrytbl spanname="descr" cols="2">
+		  <tbody valign="top">
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_PREV</constant></entry>
+		      <entry>Use the (n-2)th frame as a golden frame, current frame index being 'n'.</entry>
+		    </row>
+		    <row>
+		      <entry><constant>V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_USE_REF_PERIOD</constant></entry>
+		      <entry>Use the previous specific frame indicated by
+V4L2_CID_MPEG_VIDEO_VPX_GOLDEN_FRAME_REF_PERIOD as a golden frame.</entry>
+		    </row>
+                  </tbody>
+		</entrytbl>
+	      </row>
+
+          <row><entry></entry></row>
+        </tbody>
+      </tgroup>
+      </table>
+
+      </section>
     </section>
 
     <section id="camera-controls">

Documentation/DocBook/media/v4l/lirc_device_interface.xml

@@ -46,7 +46,9 @@ describing an IR signal are read from the chardev.</para>
 values. Pulses and spaces are only marked implicitly by their position. The
 data must start and end with a pulse, therefore, the data must always include
 an uneven number of samples. The write function must block until the data has
-been transmitted by the hardware.</para>
+been transmitted by the hardware. If more data is provided than the hardware
+can send, the driver returns EINVAL.</para>
+
 </section>
 
 <section id="lirc_ioctl">

Documentation/DocBook/media/v4l/pixfmt-nv16m.xml

@@ -0,0 +1,171 @@
+    <refentry>
+      <refmeta>
+	<refentrytitle>V4L2_PIX_FMT_NV16M ('NM16'), V4L2_PIX_FMT_NV61M ('NM61')</refentrytitle>
+	&manvol;
+      </refmeta>
+      <refnamediv>
+	<refname id="V4L2-PIX-FMT-NV16M"><constant>V4L2_PIX_FMT_NV16M</constant></refname>
+	<refname id="V4L2-PIX-FMT-NV61M"><constant>V4L2_PIX_FMT_NV61M</constant></refname>
+	<refpurpose>Variation of <constant>V4L2_PIX_FMT_NV16</constant> and <constant>V4L2_PIX_FMT_NV61</constant> with planes
+	  non contiguous in memory. </refpurpose>
+      </refnamediv>
+      <refsect1>
+	<title>Description</title>
+
+	<para>This is a multi-planar, two-plane version of the YUV 4:2:0 format.
+The three components are separated into two sub-images or planes.
+<constant>V4L2_PIX_FMT_NV16M</constant> differs from <constant>V4L2_PIX_FMT_NV16
+</constant> in that the two planes are non-contiguous in memory, i.e. the chroma
+plane does not necessarily immediately follows the luma plane.
+The luminance data occupies the first plane. The Y plane has one byte per pixel.
+In the second plane there is chrominance data with alternating chroma samples.
+The CbCr plane is the same width and height, in bytes, as the Y plane.
+Each CbCr pair belongs to four pixels. For example,
+Cb<subscript>0</subscript>/Cr<subscript>0</subscript> belongs to
+Y'<subscript>00</subscript>, Y'<subscript>01</subscript>,
+Y'<subscript>10</subscript>, Y'<subscript>11</subscript>.
+<constant>V4L2_PIX_FMT_NV61M</constant> is the same as <constant>V4L2_PIX_FMT_NV16M</constant>
+except the Cb and Cr bytes are swapped, the CrCb plane starts with a Cr byte.</para>
+
+	<para><constant>V4L2_PIX_FMT_NV16M</constant> and
+<constant>V4L2_PIX_FMT_NV61M</constant> are intended to be used only in drivers
+and applications that support the multi-planar API, described in
+<xref linkend="planar-apis"/>. </para>
+
+	<example>
+	  <title><constant>V4L2_PIX_FMT_NV16M</constant> 4 &times; 4 pixel image</title>
+
+	  <formalpara>
+	    <title>Byte Order.</title>
+	    <para>Each cell is one byte.
+		<informaltable frame="none">
+		<tgroup cols="5" align="center">
+		  <colspec align="left" colwidth="2*" />
+		  <tbody valign="top">
+		    <row>
+		      <entry>start0&nbsp;+&nbsp;0:</entry>
+		      <entry>Y'<subscript>00</subscript></entry>
+		      <entry>Y'<subscript>01</subscript></entry>
+		      <entry>Y'<subscript>02</subscript></entry>
+		      <entry>Y'<subscript>03</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start0&nbsp;+&nbsp;4:</entry>
+		      <entry>Y'<subscript>10</subscript></entry>
+		      <entry>Y'<subscript>11</subscript></entry>
+		      <entry>Y'<subscript>12</subscript></entry>
+		      <entry>Y'<subscript>13</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start0&nbsp;+&nbsp;8:</entry>
+		      <entry>Y'<subscript>20</subscript></entry>
+		      <entry>Y'<subscript>21</subscript></entry>
+		      <entry>Y'<subscript>22</subscript></entry>
+		      <entry>Y'<subscript>23</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start0&nbsp;+&nbsp;12:</entry>
+		      <entry>Y'<subscript>30</subscript></entry>
+		      <entry>Y'<subscript>31</subscript></entry>
+		      <entry>Y'<subscript>32</subscript></entry>
+		      <entry>Y'<subscript>33</subscript></entry>
+		    </row>
+		    <row>
+		      <entry></entry>
+		    </row>
+		    <row>
+		      <entry>start1&nbsp;+&nbsp;0:</entry>
+		      <entry>Cb<subscript>00</subscript></entry>
+		      <entry>Cr<subscript>00</subscript></entry>
+		      <entry>Cb<subscript>02</subscript></entry>
+		      <entry>Cr<subscript>02</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start1&nbsp;+&nbsp;4:</entry>
+		      <entry>Cb<subscript>10</subscript></entry>
+		      <entry>Cr<subscript>10</subscript></entry>
+		      <entry>Cb<subscript>12</subscript></entry>
+		      <entry>Cr<subscript>12</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start1&nbsp;+&nbsp;8:</entry>
+		      <entry>Cb<subscript>20</subscript></entry>
+		      <entry>Cr<subscript>20</subscript></entry>
+		      <entry>Cb<subscript>22</subscript></entry>
+		      <entry>Cr<subscript>22</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start1&nbsp;+&nbsp;12:</entry>
+		      <entry>Cb<subscript>30</subscript></entry>
+		      <entry>Cr<subscript>30</subscript></entry>
+		      <entry>Cb<subscript>32</subscript></entry>
+		      <entry>Cr<subscript>32</subscript></entry>
+		    </row>
+		  </tbody>
+		</tgroup>
+		</informaltable>
+	      </para>
+	  </formalpara>
+
+	  <formalpara>
+	    <title>Color Sample Location.</title>
+	    <para>
+		<informaltable frame="none">
+		<tgroup cols="7" align="center">
+		  <tbody valign="top">
+		    <row>
+		      <entry></entry>
+		      <entry>0</entry><entry></entry><entry>1</entry><entry></entry>
+		      <entry>2</entry><entry></entry><entry>3</entry>
+		    </row>
+		    <row>
+		      <entry>0</entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry>
+		    </row>
+		    <row>
+		      <entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry><entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry>
+		    </row>
+		    <row>
+		      <entry>1</entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry>
+		    </row>
+		    <row>
+		      <entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry><entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry>
+		    </row>
+		    <row>
+		      <entry></entry>
+		    </row>
+		    <row>
+		      <entry>2</entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry>
+		    </row>
+		    <row>
+		      <entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry><entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry>
+		    </row>
+		    <row>
+		      <entry>3</entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry></entry><entry>Y</entry>
+		    </row>
+		    <row>
+		      <entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry><entry></entry>
+		      <entry></entry><entry>C</entry><entry></entry>
+		    </row>
+		  </tbody>
+		</tgroup>
+		</informaltable>
+	      </para>
+	  </formalpara>
+	</example>
+      </refsect1>
+    </refentry>

Documentation/DocBook/media/v4l/pixfmt.xml

@@ -391,9 +391,9 @@ clamp (double x)
 	else               return r;
 }
 
-y1 = (255 / 219.0) * (Y1 - 16);
-pb = (255 / 224.0) * (Cb - 128);
-pr = (255 / 224.0) * (Cr - 128);
+y1 = (Y1 - 16) / 219.0;
+pb = (Cb - 128) / 224.0;
+pr = (Cr - 128) / 224.0;
 
 r = 1.0 * y1 + 0     * pb + 1.402 * pr;
 g = 1.0 * y1 - 0.344 * pb - 0.714 * pr;
@@ -718,6 +718,7 @@ information.</para>
     &sub-nv12m;
     &sub-nv12mt;
     &sub-nv16;
+    &sub-nv16m;
     &sub-nv24;
     &sub-m420;
   </section>

Documentation/DocBook/media/v4l/vidioc-create-bufs.xml

@@ -62,18 +62,29 @@ addition to the <constant>VIDIOC_REQBUFS</constant> ioctl, when a tighter
 control over buffers is required. This ioctl can be called multiple times to
 create buffers of different sizes.</para>
 
-    <para>To allocate device buffers applications initialize relevant fields of
-the <structname>v4l2_create_buffers</structname> structure. They set the
-<structfield>type</structfield> field in the
-&v4l2-format; structure, embedded in this
-structure, to the respective stream or buffer type.
-<structfield>count</structfield> must be set to the number of required buffers.
-<structfield>memory</structfield> specifies the required I/O method. The
-<structfield>format</structfield> field shall typically be filled in using
-either the <constant>VIDIOC_TRY_FMT</constant> or
-<constant>VIDIOC_G_FMT</constant> ioctl(). Additionally, applications can adjust
-<structfield>sizeimage</structfield> fields to fit their specific needs. The
-<structfield>reserved</structfield> array must be zeroed.</para>
+    <para>To allocate the device buffers applications must initialize the
+relevant fields of the <structname>v4l2_create_buffers</structname> structure.
+The <structfield>count</structfield> field must be set to the number of
+requested buffers, the <structfield>memory</structfield> field specifies the
+requested I/O method and the <structfield>reserved</structfield> array must be
+zeroed.</para>
+
+    <para>The <structfield>format</structfield> field specifies the image format
+that the buffers must be able to handle. The application has to fill in this
+&v4l2-format;. Usually this will be done using the
+<constant>VIDIOC_TRY_FMT</constant> or <constant>VIDIOC_G_FMT</constant> ioctl()
+to ensure that the requested format is supported by the driver. Unsupported
+formats will result in an error.</para>
+
+    <para>The buffers created by this ioctl will have as minimum size the size
+defined by the <structfield>format.pix.sizeimage</structfield> field. If the
+<structfield>format.pix.sizeimage</structfield> field is less than the minimum
+required for the given format, then <structfield>sizeimage</structfield> will be
+increased by the driver to that minimum to allocate the buffers. If it is
+larger, then the value will be used as-is. The same applies to the
+<structfield>sizeimage</structfield> field of the
+<structname>v4l2_plane_pix_format</structname> structure in the case of
+multiplanar formats.</para>
 
     <para>When the ioctl is called with a pointer to this structure the driver
 will attempt to allocate up to the requested number of buffers and store the
@@ -144,9 +155,9 @@ mapped</link> I/O.</para>
       <varlistentry>
 	<term><errorcode>EINVAL</errorcode></term>
 	<listitem>
-	  <para>The buffer type (<structfield>type</structfield> field) or the
-requested I/O method (<structfield>memory</structfield>) is not
-supported.</para>
+	  <para>The buffer type (<structfield>format.type</structfield> field),
+requested I/O method (<structfield>memory</structfield>) or format
+(<structfield>format</structfield> field) is not valid.</para>
 	</listitem>
       </varlistentry>
     </variablelist>

Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml

@@ -156,19 +156,19 @@ bit 0 (V4L2_DV_VSYNC_POS_POL) is for vertical sync polarity and bit 1 (V4L2_DV_H
 	    <entry>__u32</entry>
 	    <entry><structfield>il_vfrontporch</structfield></entry>
 	    <entry>Vertical front porch in lines for the even field (aka field 2) of
-	    interlaced field formats.</entry>
+	    interlaced field formats. Must be 0 for progressive formats.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>il_vsync</structfield></entry>
 	    <entry>Vertical sync length in lines for the even field (aka field 2) of
-	    interlaced field formats.</entry>
+	    interlaced field formats. Must be 0 for progressive formats.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>
 	    <entry><structfield>il_vbackporch</structfield></entry>
 	    <entry>Vertical back porch in lines for the even field (aka field 2) of
-	    interlaced field formats.</entry>
+	    interlaced field formats. Must be 0 for progressive formats.</entry>
 	  </row>
 	  <row>
 	    <entry>__u32</entry>

Documentation/DocBook/media/v4l/vidioc-g-jpegcomp.xml

@@ -92,8 +92,8 @@ to add them.</para>
 	    <entry>int</entry>
 	    <entry><structfield>quality</structfield></entry>
 	    <entry>Deprecated. If <link linkend="jpeg-quality-control"><constant>
-	    V4L2_CID_JPEG_IMAGE_QUALITY</constant></link> control is exposed by
-	    a driver applications should use it instead and ignore this field.
+	    V4L2_CID_JPEG_COMPRESSION_QUALITY</constant></link> control is exposed
+	    by a driver applications should use it instead and ignore this field.
 	    </entry>
 	  </row>
 	  <row>

Documentation/DocBook/media/v4l/vidioc-g-parm.xml

@@ -132,7 +132,7 @@ devices.</para>
 	  <row>
 	    <entry>&v4l2-fract;</entry>
 	    <entry><structfield>timeperframe</structfield></entry>
-	    <entry><para>This is is the desired period between
+	    <entry><para>This is the desired period between
 successive frames captured by the driver, in seconds. The
 field is intended to skip frames on the driver side, saving I/O
 bandwidth.</para><para>Applications store here the desired frame
@@ -193,7 +193,7 @@ applications must set the array to zero.</entry>
 	  <row>
 	    <entry>&v4l2-fract;</entry>
 	    <entry><structfield>timeperframe</structfield></entry>
-	    <entry>This is is the desired period between
+	    <entry>This is the desired period between
 successive frames output by the driver, in seconds.</entry>
 	  </row>
 	  <row>

Documentation/DocBook/media_api.tmpl

@@ -22,8 +22,14 @@
 
 <!-- LinuxTV v4l-dvb repository. -->
 <!ENTITY v4l-dvb		"<ulink url='http://linuxtv.org/repo/'>http://linuxtv.org/repo/</ulink>">
+<!ENTITY dash-ent-8             "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
 <!ENTITY dash-ent-10            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
+<!ENTITY dash-ent-12            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
+<!ENTITY dash-ent-14            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
 <!ENTITY dash-ent-16            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
+<!ENTITY dash-ent-20            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
+<!ENTITY dash-ent-22            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
+<!ENTITY dash-ent-24            "<entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry><entry>-</entry>">
 ]>
 
 <book id="media_api">

Documentation/DocBook/mtdnand.tmpl

@@ -1224,8 +1224,6 @@ in this page</entry>
 #define NAND_BBT_CREATE		0x00000200
 /* Search good / bad pattern through all pages of a block */
 #define NAND_BBT_SCANALLPAGES	0x00000400
-/* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY	0x00000800
 /* Write bbt if neccecary */
 #define NAND_BBT_WRITE		0x00001000
 /* Read and write back block contents when writing bbt */

Documentation/IRQ-affinity.txt

@@ -57,8 +57,8 @@ i.e counters for the CPU0-3 did not change.
 
 Here is an example of limiting that same irq (44) to cpus 1024 to 1031:
 
-[root@moon 44]# echo 1024-1031 > smp_affinity
-[root@moon 44]# cat smp_affinity
+[root@moon 44]# echo 1024-1031 > smp_affinity_list
+[root@moon 44]# cat smp_affinity_list
 1024-1031
 
 Note that to do this with a bitmask would require 32 bitmasks of zero

Documentation/RCU/rcubarrier.txt

@@ -70,10 +70,14 @@ in realtime kernels in order to avoid excessive scheduling latencies.
 
 rcu_barrier()
 
-We instead need the rcu_barrier() primitive. This primitive is similar
-to synchronize_rcu(), but instead of waiting solely for a grace
-period to elapse, it also waits for all outstanding RCU callbacks to
-complete. Pseudo-code using rcu_barrier() is as follows:
+We instead need the rcu_barrier() primitive.  Rather than waiting for
+a grace period to elapse, rcu_barrier() waits for all outstanding RCU
+callbacks to complete.  Please note that rcu_barrier() does -not- imply
+synchronize_rcu(), in particular, if there are no RCU callbacks queued
+anywhere, rcu_barrier() is within its rights to return immediately,
+without waiting for a grace period to elapse.
+
+Pseudo-code using rcu_barrier() is as follows:
 
    1. Prevent any new RCU callbacks from being posted.
    2. Execute rcu_barrier().

Documentation/RCU/torture.txt

@@ -42,6 +42,16 @@ fqs_holdoff	Holdoff time (in microseconds) between consecutive calls
 fqs_stutter	Wait time (in seconds) between consecutive bursts
 		of calls to force_quiescent_state().
 
+gp_normal	Make the fake writers use normal synchronous grace-period
+		primitives.
+
+gp_exp		Make the fake writers use expedited synchronous grace-period
+		primitives.  If both gp_normal and gp_exp are set, or
+		if neither gp_normal nor gp_exp are set, then randomly
+		choose the primitive so that about 50% are normal and
+		50% expedited.  By default, neither are set, which
+		gives best overall test coverage.
+
 irqreader	Says to invoke RCU readers from irq level.  This is currently
 		done via timers.  Defaults to "1" for variants of RCU that
 		permit this.  (Or, more accurately, variants of RCU that do

Documentation/SubmittingPatches

@@ -109,6 +109,16 @@ probably didn't even receive earlier versions of the patch.
 If the patch fixes a logged bug entry, refer to that bug entry by
 number and URL.
 
+If you want to refer to a specific commit, don't just refer to the
+SHA-1 ID of the commit. Please also include the oneline summary of
+the commit, to make it easier for reviewers to know what it is about.
+Example:
+
+	Commit e21d2170f36602ae2708 ("video: remove unnecessary
+	platform_set_drvdata()") removed the unnecessary
+	platform_set_drvdata(), but left the variable "dev" unused,
+	delete it.
+
 
 3) Separate your changes.
 

Documentation/acpi/enumeration.txt

@@ -207,7 +207,7 @@ passing those. One idea is to return this in _DSM method like:
 			Return (Local0)
 		}
 
-Then the at25 SPI driver can get this configation by calling _DSM on its
+Then the at25 SPI driver can get this configuration by calling _DSM on its
 ACPI handle like:
 
 	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
@@ -228,19 +228,9 @@ ACPI handle like:
 I2C serial bus support
 ~~~~~~~~~~~~~~~~~~~~~~
 The slaves behind I2C bus controller only need to add the ACPI IDs like
-with the platform and SPI drivers. However the I2C bus controller driver
-needs to call acpi_i2c_register_devices() after it has added the adapter.
-
-An I2C bus (controller) driver does:
-
-	...
-	ret = i2c_add_numbered_adapter(adapter);
-	if (ret)
-		/* handle error */
-
-	of_i2c_register_devices(adapter);
-	/* Enumerate the slave devices behind this bus via ACPI */
-	acpi_i2c_register_devices(adapter);
+with the platform and SPI drivers. The I2C core automatically enumerates
+any slave devices behind the controller device once the adapter is
+registered.
 
 Below is an example of how to add ACPI support to the existing mpu3050
 input driver:

Documentation/aoe/udev.txt

@@ -23,4 +23,4 @@ SUBSYSTEM=="aoe", KERNEL=="revalidate",	NAME="etherd/%k", GROUP="disk", MODE="02
 SUBSYSTEM=="aoe", KERNEL=="flush",	NAME="etherd/%k", GROUP="disk", MODE="0220"
 
 # aoe block devices     
-KERNEL=="etherd*",       NAME="%k", GROUP="disk"
+KERNEL=="etherd*",       GROUP="disk"

Documentation/arm/Booting

@@ -18,7 +18,8 @@ following:
 2. Initialise one serial port.
 3. Detect the machine type.
 4. Setup the kernel tagged list.
-5. Call the kernel image.
+5. Load initramfs.
+6. Call the kernel image.
 
 
 1. Setup and initialise RAM
@@ -120,12 +121,27 @@ tagged list.
 The boot loader must pass at a minimum the size and location of the
 system memory, and the root filesystem location.  The dtb must be
 placed in a region of memory where the kernel decompressor will not
-overwrite it.  The recommended placement is in the first 16KiB of RAM
-with the caveat that it may not be located at physical address 0 since
-the kernel interprets a value of 0 in r2 to mean neither a tagged list
-nor a dtb were passed.
+overwrite it, whilst remaining within the region which will be covered
+by the kernel's low-memory mapping.
 
-5. Calling the kernel image
+A safe location is just above the 128MiB boundary from start of RAM.
+
+5. Load initramfs.
+------------------
+
+Existing boot loaders:		OPTIONAL
+New boot loaders:		OPTIONAL
+
+If an initramfs is in use then, as with the dtb, it must be placed in
+a region of memory where the kernel decompressor will not overwrite it
+while also with the region which will be covered by the kernel's
+low-memory mapping.
+
+A safe location is just above the device tree blob which itself will
+be loaded just above the 128MiB boundary from the start of RAM as
+recommended above.
+
+6. Calling the kernel image
 ---------------------------
 
 Existing boot loaders:		MANDATORY
@@ -136,11 +152,17 @@ is stored in flash, and is linked correctly to be run from flash,
 then it is legal for the boot loader to call the zImage in flash
 directly.
 
-The zImage may also be placed in system RAM (at any location) and
-called there.  Note that the kernel uses 16K of RAM below the image
-to store page tables.  The recommended placement is 32KiB into RAM.
+The zImage may also be placed in system RAM and called there.  The
+kernel should be placed in the first 128MiB of RAM.  It is recommended
+that it is loaded above 32MiB in order to avoid the need to relocate
+prior to decompression, which will make the boot process slightly
+faster.
+
+When booting a raw (non-zImage) kernel the constraints are tighter.
+In this case the kernel must be loaded at an offset into system equal
+to TEXT_OFFSET - PAGE_OFFSET.
 
-In either case, the following conditions must be met:
+In any case, the following conditions must be met:
 
 - Quiesce all DMA capable devices so that memory does not get
   corrupted by bogus network packets or disk data. This will save

Documentation/arm/OMAP/omap_pm

@@ -78,7 +78,7 @@ to NULL.  Drivers should use the following idiom:
 The most common usage of these functions will probably be to specify
 the maximum time from when an interrupt occurs, to when the device
 becomes accessible.  To accomplish this, driver writers should use the
-set_max_mpu_wakeup_lat() function to to constrain the MPU wakeup
+set_max_mpu_wakeup_lat() function to constrain the MPU wakeup
 latency, and the set_max_dev_wakeup_lat() function to constrain the
 device wakeup latency (from clk_enable() to accessibility).  For
 example,

Documentation/arm/kernel_mode_neon.txt

@@ -0,0 +1,121 @@
+Kernel mode NEON
+================
+
+TL;DR summary
+-------------
+* Use only NEON instructions, or VFP instructions that don't rely on support
+  code
+* Isolate your NEON code in a separate compilation unit, and compile it with
+  '-mfpu=neon -mfloat-abi=softfp'
+* Put kernel_neon_begin() and kernel_neon_end() calls around the calls into your
+  NEON code
+* Don't sleep in your NEON code, and be aware that it will be executed with
+  preemption disabled
+
+
+Introduction
+------------
+It is possible to use NEON instructions (and in some cases, VFP instructions) in
+code that runs in kernel mode. However, for performance reasons, the NEON/VFP
+register file is not preserved and restored at every context switch or taken
+exception like the normal register file is, so some manual intervention is
+required. Furthermore, special care is required for code that may sleep [i.e.,
+may call schedule()], as NEON or VFP instructions will be executed in a
+non-preemptible section for reasons outlined below.
+
+
+Lazy preserve and restore
+-------------------------
+The NEON/VFP register file is managed using lazy preserve (on UP systems) and
+lazy restore (on both SMP and UP systems). This means that the register file is
+kept 'live', and is only preserved and restored when multiple tasks are
+contending for the NEON/VFP unit (or, in the SMP case, when a task migrates to
+another core). Lazy restore is implemented by disabling the NEON/VFP unit after
+every context switch, resulting in a trap when subsequently a NEON/VFP
+instruction is issued, allowing the kernel to step in and perform the restore if
+necessary.
+
+Any use of the NEON/VFP unit in kernel mode should not interfere with this, so
+it is required to do an 'eager' preserve of the NEON/VFP register file, and
+enable the NEON/VFP unit explicitly so no exceptions are generated on first
+subsequent use. This is handled by the function kernel_neon_begin(), which
+should be called before any kernel mode NEON or VFP instructions are issued.
+Likewise, the NEON/VFP unit should be disabled again after use to make sure user
+mode will hit the lazy restore trap upon next use. This is handled by the
+function kernel_neon_end().
+
+
+Interruptions in kernel mode
+----------------------------
+For reasons of performance and simplicity, it was decided that there shall be no
+preserve/restore mechanism for the kernel mode NEON/VFP register contents. This
+implies that interruptions of a kernel mode NEON section can only be allowed if
+they are guaranteed not to touch the NEON/VFP registers. For this reason, the
+following rules and restrictions apply in the kernel:
+* NEON/VFP code is not allowed in interrupt context;
+* NEON/VFP code is not allowed to sleep;
+* NEON/VFP code is executed with preemption disabled.
+
+If latency is a concern, it is possible to put back to back calls to
+kernel_neon_end() and kernel_neon_begin() in places in your code where none of
+the NEON registers are live. (Additional calls to kernel_neon_begin() should be
+reasonably cheap if no context switch occurred in the meantime)
+
+
+VFP and support code
+--------------------
+Earlier versions of VFP (prior to version 3) rely on software support for things
+like IEEE-754 compliant underflow handling etc. When the VFP unit needs such
+software assistance, it signals the kernel by raising an undefined instruction
+exception. The kernel responds by inspecting the VFP control registers and the
+current instruction and arguments, and emulates the instruction in software.
+
+Such software assistance is currently not implemented for VFP instructions
+executed in kernel mode. If such a condition is encountered, the kernel will
+fail and generate an OOPS.
+
+
+Separating NEON code from ordinary code
+---------------------------------------
+The compiler is not aware of the special significance of kernel_neon_begin() and
+kernel_neon_end(), i.e., that it is only allowed to issue NEON/VFP instructions
+between calls to these respective functions. Furthermore, GCC may generate NEON
+instructions of its own at -O3 level if -mfpu=neon is selected, and even if the
+kernel is currently compiled at -O2, future changes may result in NEON/VFP
+instructions appearing in unexpected places if no special care is taken.
+
+Therefore, the recommended and only supported way of using NEON/VFP in the
+kernel is by adhering to the following rules:
+* isolate the NEON code in a separate compilation unit and compile it with
+  '-mfpu=neon -mfloat-abi=softfp';
+* issue the calls to kernel_neon_begin(), kernel_neon_end() as well as the calls
+  into the unit containing the NEON code from a compilation unit which is *not*
+  built with the GCC flag '-mfpu=neon' set.
+
+As the kernel is compiled with '-msoft-float', the above will guarantee that
+both NEON and VFP instructions will only ever appear in designated compilation
+units at any optimization level.
+
+
+NEON assembler
+--------------
+NEON assembler is supported with no additional caveats as long as the rules
+above are followed.
+
+
+NEON code generated by GCC
+--------------------------
+The GCC option -ftree-vectorize (implied by -O3) tries to exploit implicit
+parallelism, and generates NEON code from ordinary C source code. This is fully
+supported as long as the rules above are followed.
+
+
+NEON intrinsics
+---------------
+NEON intrinsics are also supported. However, as code using NEON intrinsics
+relies on the GCC header <arm_neon.h>, (which #includes <stdint.h>), you should
+observe the following in addition to the rules above:
+* Compile the unit containing the NEON intrinsics with '-ffreestanding' so GCC
+  uses its builtin version of <stdint.h> (this is a C99 header which the kernel
+  does not supply);
+* Include <arm_neon.h> last, or at least after <linux/types.h>

Documentation/arm64/booting.txt

@@ -45,9 +45,9 @@ sees fit.)
 
 Requirement: MANDATORY
 
-The device tree blob (dtb) must be no bigger than 2 megabytes in size
-and placed at a 2-megabyte boundary within the first 512 megabytes from
-the start of the kernel image. This is to allow the kernel to map the
+The device tree blob (dtb) must be placed on an 8-byte boundary within
+the first 512 megabytes from the start of the kernel image and must not
+cross a 2-megabyte boundary. This is to allow the kernel to map the
 blob using a single section mapping in the initial page tables.
 
 
@@ -68,13 +68,23 @@ Image target is available instead.
 
 Requirement: MANDATORY
 
-The decompressed kernel image contains a 32-byte header as follows:
+The decompressed kernel image contains a 64-byte header as follows:
 
-  u32 magic	= 0x14000008;	/* branch to stext, little-endian */
-  u32 res0	= 0;		/* reserved */
+  u32 code0;			/* Executable code */
+  u32 code1;			/* Executable code */
   u64 text_offset;		/* Image load offset */
+  u64 res0	= 0;		/* reserved */
   u64 res1	= 0;		/* reserved */
   u64 res2	= 0;		/* reserved */
+  u64 res3	= 0;		/* reserved */
+  u64 res4	= 0;		/* reserved */
+  u32 magic	= 0x644d5241;	/* Magic number, little endian, "ARM\x64" */
+  u32 res5 = 0;      		/* reserved */
+
+
+Header notes:
+
+- code0/code1 are responsible for branching to stext.
 
 The image must be placed at the specified offset (currently 0x80000)
 from the start of the system RAM and called there. The start of the

Documentation/arm64/tagged-pointers.txt

@@ -0,0 +1,34 @@
+		Tagged virtual addresses in AArch64 Linux
+		=========================================
+
+Author: Will Deacon <will.deacon@arm.com>
+Date  : 12 June 2013
+
+This document briefly describes the provision of tagged virtual
+addresses in the AArch64 translation system and their potential uses
+in AArch64 Linux.
+
+The kernel configures the translation tables so that translations made
+via TTBR0 (i.e. userspace mappings) have the top byte (bits 63:56) of
+the virtual address ignored by the translation hardware. This frees up
+this byte for application use, with the following caveats:
+
+	(1) The kernel requires that all user addresses passed to EL1
+	    are tagged with tag 0x00. This means that any syscall
+	    parameters containing user virtual addresses *must* have
+	    their top byte cleared before trapping to the kernel.
+
+	(2) Non-zero tags are not preserved when delivering signals.
+	    This means that signal handlers in applications making use
+	    of tags cannot rely on the tag information for user virtual
+	    addresses being maintained for fields inside siginfo_t.
+	    One exception to this rule is for signals raised in response
+	    to watchpoint debug exceptions, where the tag information
+	    will be preserved.
+
+	(3) Special care should be taken when using tagged pointers,
+	    since it is likely that C compilers will not hazard two
+	    virtual addresses differing only in the upper byte.
+
+The architecture prevents the use of a tagged PC, so the upper byte will
+be set to a sign-extension of bit 55 on exception return.

Documentation/block/cfq-iosched.txt

@@ -69,7 +69,7 @@ one, this value should be decreased relative to fifo_expire_async.
 group_idle
 -----------
 This parameter forces idling at the CFQ group level instead of CFQ
-queue level. This was introduced after after a bottleneck was observed
+queue level. This was introduced after a bottleneck was observed
 in higher end storage due to idle on sequential queue and allow dispatch
 from a single queue. The idea with this parameter is that it can be run with
 slice_idle=0 and group_idle=8, so that idling does not happen on individual

Documentation/block/cmdline-partition.txt

@@ -0,0 +1,39 @@
+Embedded device command line partition
+=====================================================================
+
+Read block device partition table from command line.
+The partition used for fixed block device (eMMC) embedded device.
+It is no MBR, save storage space. Bootloader can be easily accessed
+by absolute address of data on the block device.
+Users can easily change the partition.
+
+The format for the command line is just like mtdparts:
+
+blkdevparts=<blkdev-def>[;<blkdev-def>]
+  <blkdev-def> := <blkdev-id>:<partdef>[,<partdef>]
+    <partdef> := <size>[@<offset>](part-name)
+
+<blkdev-id>
+    block device disk name, embedded device used fixed block device,
+    it's disk name also fixed. such as: mmcblk0, mmcblk1, mmcblk0boot0.
+
+<size>
+    partition size, in bytes, such as: 512, 1m, 1G.
+
+<offset>
+    partition start address, in bytes.
+
+(part-name)
+    partition name, kernel send uevent with "PARTNAME". application can create
+    a link to block device partition with the name "PARTNAME".
+    user space application can access partition by partition name.
+
+Example:
+    eMMC disk name is "mmcblk0" and "mmcblk0boot0"
+
+  bootargs:
+    'blkdevparts=mmcblk0:1G(data0),1G(data1),-;mmcblk0boot0:1m(boot),-(kernel)'
+
+  dmesg:
+    mmcblk0: p1(data0) p2(data1) p3()
+    mmcblk0boot0: p1(boot) p2(kernel)

Documentation/cachetlb.txt

@@ -57,7 +57,7 @@ changes occur:
 	interface must make sure that any previous page table
 	modifications for the address space 'vma->vm_mm' in the range
 	'start' to 'end-1' will be visible to the cpu.  That is, after
-	running, here will be no entries in the TLB for 'mm' for
+	running, there will be no entries in the TLB for 'mm' for
 	virtual addresses in the range 'start' to 'end-1'.
 
 	The "vma" is the backing store being used for the region.
@@ -375,8 +375,8 @@ maps this page at its virtual address.
 
   void flush_icache_page(struct vm_area_struct *vma, struct page *page)
 	All the functionality of flush_icache_page can be implemented in
-	flush_dcache_page and update_mmu_cache. In 2.7 the hope is to
-	remove this interface completely.
+	flush_dcache_page and update_mmu_cache. In the future, the hope
+	is to remove this interface completely.
 
 The final category of APIs is for I/O to deliberately aliased address
 ranges inside the kernel.  Such aliases are set up by use of the

Documentation/cgroups/memory.txt

@@ -490,6 +490,8 @@ pgpgin		- # of charging events to the memory cgroup. The charging
 pgpgout		- # of uncharging events to the memory cgroup. The uncharging
 		event happens each time a page is unaccounted from the cgroup.
 swap		- # of bytes of swap usage
+writeback	- # of bytes of file/anon cache that are queued for syncing to
+		disk.
 inactive_anon	- # of bytes of anonymous and swap cache memory on inactive
 		LRU list.
 active_anon	- # of bytes of anonymous and swap cache memory on active

Documentation/clk.txt

@@ -70,6 +70,10 @@ the operations defined in clk.h:
 						unsigned long parent_rate);
 		long		(*round_rate)(struct clk_hw *hw, unsigned long,
 						unsigned long *);
+		long		(*determine_rate)(struct clk_hw *hw,
+						unsigned long rate,
+						unsigned long *best_parent_rate,
+						struct clk **best_parent_clk);
 		int		(*set_parent)(struct clk_hw *hw, u8 index);
 		u8		(*get_parent)(struct clk_hw *hw);
 		int		(*set_rate)(struct clk_hw *hw, unsigned long);
@@ -179,26 +183,28 @@ mandatory, a cell marked as "n" implies that either including that
 callback is invalid or otherwise unnecessary.  Empty cells are either
 optional or must be evaluated on a case-by-case basis.
 
-                           clock hardware characteristics
-	     -----------------------------------------------------------
-             | gate | change rate | single parent | multiplexer | root |
-             |------|-------------|---------------|-------------|------|
-.prepare     |      |             |               |             |      |
-.unprepare   |      |             |               |             |      |
-             |      |             |               |             |      |
-.enable      | y    |             |               |             |      |
-.disable     | y    |             |               |             |      |
-.is_enabled  | y    |             |               |             |      |
-             |      |             |               |             |      |
-.recalc_rate |      | y           |               |             |      |
-.round_rate  |      | y           |               |             |      |
-.set_rate    |      | y           |               |             |      |
-             |      |             |               |             |      |
-.set_parent  |      |             | n             | y           | n    |
-.get_parent  |      |             | n             | y           | n    |
-             |      |             |               |             |      |
-.init        |      |             |               |             |      |
-	     -----------------------------------------------------------
+                              clock hardware characteristics
+                -----------------------------------------------------------
+                | gate | change rate | single parent | multiplexer | root |
+                |------|-------------|---------------|-------------|------|
+.prepare        |      |             |               |             |      |
+.unprepare      |      |             |               |             |      |
+                |      |             |               |             |      |
+.enable         | y    |             |               |             |      |
+.disable        | y    |             |               |             |      |
+.is_enabled     | y    |             |               |             |      |
+                |      |             |               |             |      |
+.recalc_rate    |      | y           |               |             |      |
+.round_rate     |      | y [1]       |               |             |      |
+.determine_rate |      | y [1]       |               |             |      |
+.set_rate       |      | y           |               |             |      |
+                |      |             |               |             |      |
+.set_parent     |      |             | n             | y           | n    |
+.get_parent     |      |             | n             | y           | n    |
+                |      |             |               |             |      |
+.init           |      |             |               |             |      |
+                -----------------------------------------------------------
+[1] either one of round_rate or determine_rate is required.
 
 Finally, register your clock at run-time with a hardware-specific
 registration function.  This function simply populates struct clk_foo's

Documentation/cpu-freq/cpu-drivers.txt

@@ -50,8 +50,6 @@ What shall this struct cpufreq_driver contain?
 
 cpufreq_driver.name -		The name of this driver.
 
-cpufreq_driver.owner -		THIS_MODULE;
-
 cpufreq_driver.init -		A pointer to the per-CPU initialization 
 				function.
 

Documentation/cputopology.txt

@@ -22,7 +22,7 @@ to /proc/cpuinfo.
 
 4) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
 
-	internel kernel map of cpuX's hardware threads within the same
+	internal kernel map of cpuX's hardware threads within the same
 	core as cpuX
 
 5) /sys/devices/system/cpu/cpuX/topology/core_siblings:

Documentation/development-process/2.Process

@@ -276,7 +276,7 @@ mainline get there via -mm.
 The current -mm patch is available in the "mmotm" (-mm of the moment)
 directory at:
 
-	http://userweb.kernel.org/~akpm/mmotm/
+	http://www.ozlabs.org/~akpm/mmotm/
 
 Use of the MMOTM tree is likely to be a frustrating experience, though;
 there is a definite chance that it will not even compile.
@@ -287,7 +287,7 @@ the mainline is expected to look like after the next merge window closes.
 Linux-next trees are announced on the linux-kernel and linux-next mailing
 lists when they are assembled; they can be downloaded from:
 
-	http://www.kernel.org/pub/linux/kernel/people/sfr/linux-next/
+	http://www.kernel.org/pub/linux/kernel/next/
 
 Some information about linux-next has been gathered at:
 

Documentation/device-mapper/cache.txt

@@ -50,14 +50,16 @@ other parameters detailed later):
    which are dirty, and extra hints for use by the policy object.
    This information could be put on the cache device, but having it
    separate allows the volume manager to configure it differently,
-   e.g. as a mirror for extra robustness.
+   e.g. as a mirror for extra robustness.  This metadata device may only
+   be used by a single cache device.
 
 Fixed block size
 ----------------
 
 The origin is divided up into blocks of a fixed size.  This block size
 is configurable when you first create the cache.  Typically we've been
-using block sizes of 256k - 1024k.
+using block sizes of 256KB - 1024KB.  The block size must be between 64
+(32KB) and 2097152 (1GB) and a multiple of 64 (32KB).
 
 Having a fixed block size simplifies the target a lot.  But it is
 something of a compromise.  For instance, a small part of a block may be

Documentation/device-mapper/statistics.txt

@@ -0,0 +1,186 @@
+DM statistics
+=============
+
+Device Mapper supports the collection of I/O statistics on user-defined
+regions of a DM device.	 If no regions are defined no statistics are
+collected so there isn't any performance impact.  Only bio-based DM
+devices are currently supported.
+
+Each user-defined region specifies a starting sector, length and step.
+Individual statistics will be collected for each step-sized area within
+the range specified.
+
+The I/O statistics counters for each step-sized area of a region are
+in the same format as /sys/block/*/stat or /proc/diskstats (see:
+Documentation/iostats.txt).  But two extra counters (12 and 13) are
+provided: total time spent reading and writing in milliseconds.	 All
+these counters may be accessed by sending the @stats_print message to
+the appropriate DM device via dmsetup.
+
+Each region has a corresponding unique identifier, which we call a
+region_id, that is assigned when the region is created.	 The region_id
+must be supplied when querying statistics about the region, deleting the
+region, etc.  Unique region_ids enable multiple userspace programs to
+request and process statistics for the same DM device without stepping
+on each other's data.
+
+The creation of DM statistics will allocate memory via kmalloc or
+fallback to using vmalloc space.  At most, 1/4 of the overall system
+memory may be allocated by DM statistics.  The admin can see how much
+memory is used by reading
+/sys/module/dm_mod/parameters/stats_current_allocated_bytes
+
+Messages
+========
+
+    @stats_create <range> <step> [<program_id> [<aux_data>]]
+
+	Create a new region and return the region_id.
+
+	<range>
+	  "-" - whole device
+	  "<start_sector>+<length>" - a range of <length> 512-byte sectors
+				      starting with <start_sector>.
+
+	<step>
+	  "<area_size>" - the range is subdivided into areas each containing
+			  <area_size> sectors.
+	  "/<number_of_areas>" - the range is subdivided into the specified
+				 number of areas.
+
+	<program_id>
+	  An optional parameter.  A name that uniquely identifies
+	  the userspace owner of the range.  This groups ranges together
+	  so that userspace programs can identify the ranges they
+	  created and ignore those created by others.
+	  The kernel returns this string back in the output of
+	  @stats_list message, but it doesn't use it for anything else.
+
+	<aux_data>
+	  An optional parameter.  A word that provides auxiliary data
+	  that is useful to the client program that created the range.
+	  The kernel returns this string back in the output of
+	  @stats_list message, but it doesn't use this value for anything.
+
+    @stats_delete <region_id>
+
+	Delete the region with the specified id.
+
+	<region_id>
+	  region_id returned from @stats_create
+
+    @stats_clear <region_id>
+
+	Clear all the counters except the in-flight i/o counters.
+
+	<region_id>
+	  region_id returned from @stats_create
+
+    @stats_list [<program_id>]
+
+	List all regions registered with @stats_create.
+
+	<program_id>
+	  An optional parameter.
+	  If this parameter is specified, only matching regions
+	  are returned.
+	  If it is not specified, all regions are returned.
+
+	Output format:
+	  <region_id>: <start_sector>+<length> <step> <program_id> <aux_data>
+
+    @stats_print <region_id> [<starting_line> <number_of_lines>]
+
+	Print counters for each step-sized area of a region.
+
+	<region_id>
+	  region_id returned from @stats_create
+
+	<starting_line>
+	  The index of the starting line in the output.
+	  If omitted, all lines are returned.
+
+	<number_of_lines>
+	  The number of lines to include in the output.
+	  If omitted, all lines are returned.
+
+	Output format for each step-sized area of a region:
+
+	  <start_sector>+<length> counters
+
+	  The first 11 counters have the same meaning as
+	  /sys/block/*/stat or /proc/diskstats.
+
+	  Please refer to Documentation/iostats.txt for details.
+
+	  1. the number of reads completed
+	  2. the number of reads merged
+	  3. the number of sectors read
+	  4. the number of milliseconds spent reading
+	  5. the number of writes completed
+	  6. the number of writes merged
+	  7. the number of sectors written
+	  8. the number of milliseconds spent writing
+	  9. the number of I/Os currently in progress
+	  10. the number of milliseconds spent doing I/Os
+	  11. the weighted number of milliseconds spent doing I/Os
+
+	  Additional counters:
+	  12. the total time spent reading in milliseconds
+	  13. the total time spent writing in milliseconds
+
+    @stats_print_clear <region_id> [<starting_line> <number_of_lines>]
+
+	Atomically print and then clear all the counters except the
+	in-flight i/o counters.	 Useful when the client consuming the
+	statistics does not want to lose any statistics (those updated
+	between printing and clearing).
+
+	<region_id>
+	  region_id returned from @stats_create
+
+	<starting_line>
+	  The index of the starting line in the output.
+	  If omitted, all lines are printed and then cleared.
+
+	<number_of_lines>
+	  The number of lines to process.
+	  If omitted, all lines are printed and then cleared.
+
+    @stats_set_aux <region_id> <aux_data>
+
+	Store auxiliary data aux_data for the specified region.
+
+	<region_id>
+	  region_id returned from @stats_create
+
+	<aux_data>
+	  The string that identifies data which is useful to the client
+	  program that created the range.  The kernel returns this
+	  string back in the output of @stats_list message, but it
+	  doesn't use this value for anything.
+
+Examples
+========
+
+Subdivide the DM device 'vol' into 100 pieces and start collecting
+statistics on them:
+
+  dmsetup message vol 0 @stats_create - /100
+
+Set the auxillary data string to "foo bar baz" (the escape for each
+space must also be escaped, otherwise the shell will consume them):
+
+  dmsetup message vol 0 @stats_set_aux 0 foo\\ bar\\ baz
+
+List the statistics:
+
+  dmsetup message vol 0 @stats_list
+
+Print the statistics:
+
+  dmsetup message vol 0 @stats_print 0
+
+Delete the statistics:
+
+  dmsetup message vol 0 @stats_delete 0

Documentation/device-mapper/thin-provisioning.txt

@@ -99,13 +99,14 @@ Using an existing pool device
 		 $data_block_size $low_water_mark"
 
 $data_block_size gives the smallest unit of disk space that can be
-allocated at a time expressed in units of 512-byte sectors.  People
-primarily interested in thin provisioning may want to use a value such
-as 1024 (512KB).  People doing lots of snapshotting may want a smaller value
-such as 128 (64KB).  If you are not zeroing newly-allocated data,
-a larger $data_block_size in the region of 256000 (128MB) is suggested.
-$data_block_size must be the same for the lifetime of the
-metadata device.
+allocated at a time expressed in units of 512-byte sectors.
+$data_block_size must be between 128 (64KB) and 2097152 (1GB) and a
+multiple of 128 (64KB).  $data_block_size cannot be changed after the
+thin-pool is created.  People primarily interested in thin provisioning
+may want to use a value such as 1024 (512KB).  People doing lots of
+snapshotting may want a smaller value such as 128 (64KB).  If you are
+not zeroing newly-allocated data, a larger $data_block_size in the
+region of 256000 (128MB) is suggested.
 
 $low_water_mark is expressed in blocks of size $data_block_size.  If
 free space on the data device drops below this level then a dm event

Documentation/devicetree/bindings/arm/arch_timer.txt

@@ -1,10 +1,14 @@
 * ARM architected timer
 
-ARM cores may have a per-core architected timer, which provides per-cpu timers.
+ARM cores may have a per-core architected timer, which provides per-cpu timers,
+or a memory mapped architected timer, which provides up to 8 frames with a
+physical and optional virtual timer per frame.
 
-The timer is attached to a GIC to deliver its per-processor interrupts.
+The per-core architected timer is attached to a GIC to deliver its
+per-processor interrupts via PPIs. The memory mapped timer is attached to a GIC
+to deliver its interrupts via SPIs.
 
-** Timer node properties:
+** CP15 Timer node properties:
 
 - compatible : Should at least contain one of
 	"arm,armv7-timer"
@@ -26,3 +30,52 @@ Example:
 			     <1 10 0xf08>;
 		clock-frequency = <100000000>;
 	};
+
+** Memory mapped timer node properties:
+
+- compatible : Should at least contain "arm,armv7-timer-mem".
+
+- clock-frequency : The frequency of the main counter, in Hz. Optional.
+
+- reg : The control frame base address.
+
+Note that #address-cells, #size-cells, and ranges shall be present to ensure
+the CPU can address a frame's registers.
+
+A timer node has up to 8 frame sub-nodes, each with the following properties:
+
+- frame-number: 0 to 7.
+
+- interrupts : Interrupt list for physical and virtual timers in that order.
+  The virtual timer interrupt is optional.
+
+- reg : The first and second view base addresses in that order. The second view
+  base address is optional.
+
+- status : "disabled" indicates the frame is not available for use. Optional.
+
+Example:
+
+	timer@f0000000 {
+		compatible = "arm,armv7-timer-mem";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		reg = <0xf0000000 0x1000>;
+		clock-frequency = <50000000>;
+
+		frame@f0001000 {
+			frame-number = <0>
+			interrupts = <0 13 0x8>,
+				     <0 14 0x8>;
+			reg = <0xf0001000 0x1000>,
+			      <0xf0002000 0x1000>;
+		};
+
+		frame@f0003000 {
+			frame-number = <1>
+			interrupts = <0 15 0x8>;
+			reg = <0xf0003000 0x1000>;
+			status = "disabled";
+		};
+	};

Documentation/devicetree/bindings/arm/atmel-adc.txt

@@ -1,18 +1,15 @@
 * AT91's Analog to Digital Converter (ADC)
 
 Required properties:
-  - compatible: Should be "atmel,at91sam9260-adc"
+  - compatible: Should be "atmel,<chip>-adc"
+    <chip> can be "at91sam9260", "at91sam9g45" or "at91sam9x5"
   - reg: Should contain ADC registers location and length
   - interrupts: Should contain the IRQ line for the ADC
-  - atmel,adc-channel-base: Offset of the first channel data register
   - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this
     device
-  - atmel,adc-drdy-mask: Mask of the DRDY interruption in the ADC
   - atmel,adc-num-channels: Number of channels available in the ADC
   - atmel,adc-startup-time: Startup Time of the ADC in microseconds as
     defined in the datasheet
-  - atmel,adc-status-register: Offset of the Interrupt Status Register
-  - atmel,adc-trigger-register: Offset of the Trigger Register
   - atmel,adc-vref: Reference voltage in millivolts for the conversions
   - atmel,adc-res: List of resolution in bits supported by the ADC. List size
 		   must be two at least.

Documentation/devicetree/bindings/arm/bcm/bcm,kona-timer.txt

@@ -1,19 +0,0 @@
-Broadcom Kona Family timer
------------------------------------------------------
-This timer is used in the following Broadcom SoCs:
- BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
-
-Required properties:
-- compatible : "bcm,kona-timer"
-- reg : Register range for the timer
-- interrupts : interrupt for the timer
-- clock-frequency: frequency that the clock operates
-
-Example:
-	timer@35006000 {
-		compatible = "bcm,kona-timer";
-		reg = <0x35006000 0x1000>;
-		interrupts = <0x0 7 0x4>;
-		clock-frequency = <32768>;
-	};
-

Documentation/devicetree/bindings/arm/bcm/bcm11351.txt

@@ -6,4 +6,5 @@ bcm11351, bcm28145, bcm28155 SoCs) shall have the following properties:
 
 Required root node property:
 
-compatible = "bcm,bcm11351";
+compatible = "brcm,bcm11351";
+DEPRECATED: compatible = "bcm,bcm11351";

Documentation/devicetree/bindings/arm/bcm/kona-timer.txt

@@ -0,0 +1,20 @@
+Broadcom Kona Family timer
+-----------------------------------------------------
+This timer is used in the following Broadcom SoCs:
+ BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
+
+Required properties:
+- compatible : "brcm,kona-timer"
+- DEPRECATED: compatible : "bcm,kona-timer"
+- reg : Register range for the timer
+- interrupts : interrupt for the timer
+- clock-frequency: frequency that the clock operates
+
+Example:
+	timer@35006000 {
+		compatible = "brcm,kona-timer";
+		reg = <0x35006000 0x1000>;
+		interrupts = <0x0 7 0x4>;
+		clock-frequency = <32768>;
+	};
+

Documentation/devicetree/bindings/arm/bcm/kona-wdt.txt

@@ -0,0 +1,15 @@
+Broadcom Kona Family Watchdog Timer
+-----------------------------------
+
+This watchdog timer is used in the following Broadcom SoCs:
+  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155
+
+Required properties:
+  - compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
+  - reg: memory address & range
+
+Example:
+	watchdog@35002f40 {
+		compatible = "brcm,bcm11351-wdt", "brcm,kona-wdt";
+		reg = <0x35002f40 0x6c>;
+	};

Documentation/devicetree/bindings/arm/l2cc.txt

@@ -16,9 +16,11 @@ Required properties:
      performs the same operation).
 	"marvell,"aurora-outer-cache: Marvell Controller designed to be
 	 compatible with the ARM one with outer cache mode.
-	"bcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an
+	"brcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an
 	offset needs to be added to the address before passing down to the L2
 	cache controller
+	"bcm,bcm11351-a2-pl310-cache": DEPRECATED by
+	                               "brcm,bcm11351-a2-pl310-cache"
 - cache-unified : Specifies the cache is a unified cache.
 - cache-level : Should be set to 2 for a level 2 cache.
 - reg : Physical base address and size of cache controller's memory mapped

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -59,3 +59,6 @@ Boards:
 
 - AM43x EPOS EVM
   compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"
+
+- DRA7 EVM:  Software Developement Board for DRA7XX
+  compatible = "ti,dra7-evm", "ti,dra7"

Documentation/devicetree/bindings/arm/ste-u300.txt

@@ -22,7 +22,7 @@ This contains the board-specific information.
 - compatible: must be "stericsson,s365".
 - vana15-supply: the regulator supplying the 1.5V to drive the
   board.
-- syscon: a pointer to the syscon node so we can acccess the
+- syscon: a pointer to the syscon node so we can access the
   syscon registers to set the board as self-powered.
 
 Example:

Documentation/devicetree/bindings/arm/vexpress-scc.txt

@@ -0,0 +1,33 @@
+ARM Versatile Express Serial Configuration Controller
+-----------------------------------------------------
+
+Test chips for ARM Versatile Express platform implement SCC (Serial
+Configuration Controller) interface, used to set initial conditions
+for the test chip.
+
+In some cases its registers are also mapped in normal address space
+and can be used to obtain runtime information about the chip internals
+(like silicon temperature sensors) and as interface to other subsystems
+like platform configuration control and power management.
+
+Required properties:
+
+- compatible value: "arm,vexpress-scc,<model>", "arm,vexpress-scc";
+		    where <model> is the full tile model name (as used
+		    in the tile's Technical Reference Manual),
+		    eg. for Coretile Express A15x2 A7x3 (V2P-CA15_A7):
+	compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
+
+Optional properties:
+
+- reg: when the SCC is memory mapped, physical address and size of the
+       registers window
+- interrupts: when the SCC can generate a system-level interrupt
+
+Example:
+
+	scc@7fff0000 {
+		compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
+		reg = <0 0x7fff0000 0 0x1000>;
+		interrupts = <0 95 4>;
+	};

Documentation/devicetree/bindings/arm/vexpress-sysreg.txt

@@ -32,8 +32,8 @@ numbers - see motherboard's TRM for more details.
 The node describing a config device must refer to the sysreg node via
 "arm,vexpress,config-bridge" phandle (can be also defined in the node's
 parent) and relies on the board topology properties - see main vexpress
-node documentation for more details. It must must also define the
-following property:
+node documentation for more details. It must also define the following
+property:
 - arm,vexpress-sysreg,func : must contain two cells:
   - first cell defines function number (eg. 1 for clock generator,
     2 for voltage regulators etc.)

Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -4,27 +4,17 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
 Required properties:
-- compatible        : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci"
+- compatible        : compatible list, contains "snps,spear-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
 Optional properties:
-- calxeda,port-phys: phandle-combophy and lane assignment, which maps each
-			SATA port to a combophy and a lane within that
-			combophy
-- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
-			which indicates that the driver supports SGPIO
-			indicator lights using the indicated GPIOs
-- calxeda,led-order : a u32 array that map port numbers to offsets within the
-			SGPIO bitstream.
 - dma-coherent      : Present if dma operations are coherent
 
 Example:
         sata@ffe08000 {
-		compatible = "calxeda,hb-ahci";
-                reg = <0xffe08000 0x1000>;
-                interrupts = <115>;
-		calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
-					&combophy0 2 &combophy0 3>;
+		compatible = "snps,spear-ahci";
+		reg = <0xffe08000 0x1000>;
+		interrupts = <115>;
 
         };

Documentation/devicetree/bindings/ata/sata_highbank.txt

@@ -0,0 +1,44 @@
+* Calxeda AHCI SATA Controller
+
+SATA nodes are defined to describe on-chip Serial ATA controllers.
+The Calxeda SATA controller mostly conforms to the AHCI interface
+with some special extensions to add functionality.
+Each SATA controller should have its own node.
+
+Required properties:
+- compatible        : compatible list, contains "calxeda,hb-ahci"
+- interrupts        : <interrupt mapping for SATA IRQ>
+- reg               : <registers mapping>
+
+Optional properties:
+- dma-coherent      : Present if dma operations are coherent
+- calxeda,port-phys : phandle-combophy and lane assignment, which maps each
+			SATA port to a combophy and a lane within that
+			combophy
+- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
+			which indicates that the driver supports SGPIO
+			indicator lights using the indicated GPIOs
+- calxeda,led-order : a u32 array that map port numbers to offsets within the
+			SGPIO bitstream.
+- calxeda,tx-atten  : a u32 array that contains TX attenuation override
+			codes, one per port. The upper 3 bytes are always
+			0 and thus ignored.
+- calxeda,pre-clocks : a u32 that indicates the number of additional clock
+			cycles to transmit before sending an SGPIO pattern
+- calxeda,post-clocks: a u32 that indicates the number of additional clock
+			cycles to transmit after sending an SGPIO pattern
+
+Example:
+        sata@ffe08000 {
+		compatible = "calxeda,hb-ahci";
+		reg = <0xffe08000 0x1000>;
+		interrupts = <115>;
+		dma-coherent;
+		calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1
+					&combophy0 2 &combophy0 3>;
+		calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
+		calxeda,led-order = <4 0 1 2 3>;
+		calxeda,tx-atten = <0xff 22 0xff 0xff 23>;
+		calxeda,pre-clocks = <10>;
+		calxeda,post-clocks = <0>;
+        };

Documentation/devicetree/bindings/bus/imx-weim.txt

@@ -8,7 +8,7 @@ The actual devices are instantiated from the child nodes of a WEIM node.
 
 Required properties:
 
- - compatible:		Should be set to "fsl,imx6q-weim"
+ - compatible:		Should be set to "fsl,<soc>-weim"
  - reg:			A resource specifier for the register space
 			(see the example below)
  - clocks:		the clock, see the example below.
@@ -21,11 +21,18 @@ Required properties:
 
 Timing property for child nodes. It is mandatory, not optional.
 
- - fsl,weim-cs-timing:	The timing array, contains 6 timing values for the
+ - fsl,weim-cs-timing:	The timing array, contains timing values for the
 			child node. We can get the CS index from the child
-			node's "reg" property. This property contains the values
-			for the registers EIM_CSnGCR1, EIM_CSnGCR2, EIM_CSnRCR1,
-			EIM_CSnRCR2, EIM_CSnWCR1, EIM_CSnWCR2 in this order.
+			node's "reg" property. The number of registers depends
+			on the selected chip.
+			For i.MX1, i.MX21 ("fsl,imx1-weim") there are two
+			registers: CSxU, CSxL.
+			For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim")
+			there are three registers: CSCRxU, CSCRxL, CSCRxA.
+			For i.MX50, i.MX53 ("fsl,imx50-weim"),
+			i.MX51 ("fsl,imx51-weim") and i.MX6Q ("fsl,imx6q-weim")
+			there are six registers: CSxGCR1, CSxGCR2, CSxRCR1,
+			CSxRCR2, CSxWCR1, CSxWCR2.
 
 Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
 

Documentation/devicetree/bindings/bus/mvebu-mbus.txt

@@ -0,0 +1,276 @@
+
+* Marvell MBus
+
+Required properties:
+
+- compatible:	 Should be set to one of the following:
+		 marvell,armada370-mbus
+		 marvell,armadaxp-mbus
+		 marvell,armada370-mbus
+		 marvell,armadaxp-mbus
+		 marvell,kirkwood-mbus
+		 marvell,dove-mbus
+		 marvell,orion5x-88f5281-mbus
+		 marvell,orion5x-88f5182-mbus
+		 marvell,orion5x-88f5181-mbus
+		 marvell,orion5x-88f6183-mbus
+		 marvell,mv78xx0-mbus
+
+- address-cells: Must be '2'. The first cell for the MBus ID encoding,
+                 the second cell for the address offset within the window.
+
+- size-cells:    Must be '1'.
+
+- ranges:        Must be set up to provide a proper translation for each child.
+	         See the examples below.
+
+- controller:    Contains a single phandle referring to the MBus controller
+                 node. This allows to specify the node that contains the
+		 registers that control the MBus, which is typically contained
+		 within the internal register window (see below).
+
+Optional properties:
+
+- pcie-mem-aperture:	This optional property contains the aperture for
+			the memory region of the PCIe driver.
+			If it's defined, it must encode the base address and
+			size for the address decoding windows allocated for
+			the PCIe memory region.
+
+- pcie-io-aperture:	Just as explained for the above property, this
+			optional property contains the aperture for the
+			I/O region of the PCIe driver.
+
+* Marvell MBus controller
+
+Required properties:
+
+- compatible:	Should be set to "marvell,mbus-controller".
+
+- reg:          Device's register space.
+		Two entries are expected (see the examples below):
+		the first one controls the devices decoding window and
+		the second one controls the SDRAM decoding window.
+
+Example:
+
+	soc {
+		compatible = "marvell,armada370-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+		pcie-mem-aperture = <0xe0000000 0x8000000>;
+		pcie-io-aperture  = <0xe8000000 0x100000>;
+
+		internal-regs {
+			compatible = "simple-bus";
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			/* more children ...*/
+		};
+	};
+
+** MBus address decoding window specification
+
+The MBus children address space is comprised of two cells: the first one for
+the window ID and the second one for the offset within the window.
+In order to allow to describe valid and non-valid window entries, the
+following encoding is used:
+
+  0xSIAA0000 0x00oooooo
+
+Where:
+
+  S = 0x0 for a MBus valid window
+  S = 0xf for a non-valid window (see below)
+
+If S = 0x0, then:
+
+   I = 4-bit window target ID
+  AA = windpw attribute
+
+If S = 0xf, then:
+
+   I = don't care
+   AA = 1 for internal register
+
+Following the above encoding, for each ranges entry for a MBus valid window
+(S = 0x0), an address decoding window is allocated. On the other side,
+entries for translation that do not correspond to valid windows (S = 0xf)
+are skipped.
+
+	soc {
+		compatible = "marvell,armada370-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+
+		ranges = <0xf0010000 0 0 0xd0000000 0x100000
+			  0x01e00000 0 0 0xfff00000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <0x01e00000 0 0x100000>;
+		};
+
+		/* other children */
+		...
+
+		internal-regs {
+			compatible = "simple-bus";
+			ranges = <0 0xf0010000 0 0x100000>;
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			/* more children ...*/
+		};
+	};
+
+In the shown example, the translation entry in the 'ranges' property is what
+makes the MBus driver create a static decoding window for the corresponding
+given child device. Note that the binding does not require child nodes to be
+present. Of course, child nodes are needed to probe the devices.
+
+Since each window is identified by its target ID and attribute ID there's
+a special macro that can be use to simplify the translation entries:
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+Using this macro, the above example would be:
+
+	soc {
+		compatible = "marvell,armada370-mbus", "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		controller = <&mbusc>;
+
+		ranges = < MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+			   MBUS_ID(0x01, 0xe0) 0 0 0xfff00000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
+		};
+
+		/* other children */
+		...
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			mbusc: mbus-controller@20000 {
+				compatible = "marvell,mbus-controller";
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			/* other children */
+			...
+		};
+	};
+
+
+** About the window base address
+
+Remember the MBus controller allows a great deal of flexibility for choosing
+the decoding window base address. When planning the device tree layout it's
+possible to choose any address as the base address, provided of course there's
+a region large enough available, and with the required alignment.
+
+Yet in other words: there's nothing preventing us from setting a base address
+of 0xf0000000, or 0xd0000000 for the NOR device shown above, if such region is
+unused.
+
+** Window allocation policy
+
+The mbus-node ranges property defines a set of mbus windows that are expected
+to be set by the operating system and that are guaranteed to be free of overlaps
+with one another or with the system memory ranges.
+
+Each entry in the property refers to exactly one window. If the operating system
+choses to use a different set of mbus windows, it must ensure that any address
+translations performed from downstream devices are adapted accordingly.
+
+The operating system may insert additional mbus windows that do not conflict
+with the ones listed in the ranges, e.g. for mapping PCIe devices.
+As a special case, the internal register window must be set up by the boot
+loader at the address listed in the ranges property, since access to that region
+is needed to set up the other windows.
+
+** Example
+
+See the example below, where a more complete device tree is shown:
+
+	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+		controller = <&mbusc>;
+
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000   /* internal-regs */
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		devbus-bootcs {
+			status = "okay";
+			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>;
+
+			/* NOR */
+			nor {
+				compatible = "cfi-flash";
+				reg = <0 0x8000000>;
+				bank-width = <2>;
+			};
+		};
+
+		pcie-controller {
+			compatible = "marvell,armada-xp-pcie";
+			status = "okay";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
+				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
+				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
+				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000800 0 0xe0000000 MBUS_ID(0x04, 0xe8) 0xe0000000 0 0x08000000 /* Port 0.0 MEM */
+				0x81000800 0 0          MBUS_ID(0x04, 0xe0) 0xe8000000 0 0x00100000 /* Port 0.0 IO */>;
+
+
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+		};
+
+		internal-regs {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+			mbusc: mbus-controller@20000 {
+				reg = <0x20000 0x100>, <0x20180 0x20>;
+			};
+
+			interrupt-controller@20000 {
+			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+			};
+		};
+	};

Documentation/devicetree/bindings/c6x/dscr.txt

@@ -5,7 +5,7 @@ TI C6X SoCs contain a region of miscellaneous registers which provide various
 function for SoC control or status. Details vary considerably among from SoC
 to SoC with no two being alike.
 
-In general, the Device State Configuraion Registers (DSCR) will provide one or
+In general, the Device State Configuration Registers (DSCR) will provide one or
 more configuration registers often protected by a lock register where one or
 more key values must be written to a lock register in order to unlock the
 configuration register for writes. These configuration register may be used to

Documentation/devicetree/bindings/clock/clk-exynos-audss.txt

@@ -2,7 +2,7 @@
 
 The Samsung Audio Subsystem clock controller generates and supplies clocks
 to Audio Subsystem block available in the S5PV210 and Exynos SoCs. The clock
-binding described here is applicable to all SoC's in Exynos family.
+binding described here is applicable to all SoCs in Exynos family.
 
 Required Properties:
 

Documentation/devicetree/bindings/clock/exynos4-clock.txt

@@ -236,6 +236,7 @@ Exynos4 SoC and this is specified where applicable.
   spi0_isp_sclk       380     Exynos4x12
   spi1_isp_sclk       381     Exynos4x12
   uart_isp_sclk       382     Exynos4x12
+  tmu_apbif           383
 
 		[Mux Clocks]
 

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

@@ -59,6 +59,9 @@ clock which they consume.
   sclk_spi0		154
   sclk_spi1		155
   sclk_spi2		156
+  div_i2s1		157
+  div_i2s2		158
+  sclk_hdmiphy		159
 
 
    [Peripheral Clock Gates]
@@ -154,7 +157,16 @@ clock which they consume.
   dsim0			341
   dp			342
   mixer			343
-  hdmi			345
+  hdmi			344
+  g2d			345
+
+
+   [Clock Muxes]
+
+  Clock			ID
+  ----------------------------
+  mout_hdmi		1024
+
 
 Example 1: An example of a clock controller node is listed below.
 

Documentation/devicetree/bindings/clock/exynos5420-clock.txt

@@ -59,6 +59,7 @@ clock which they consume.
   sclk_pwm		155
   sclk_gscl_wa		156
   sclk_gscl_wb		157
+  sclk_hdmiphy		158
 
    [Peripheral Clock Gates]
 
@@ -179,6 +180,17 @@ clock which they consume.
   fimc_lite3		495
   aclk_g3d		500
   g3d			501
+  smmu_mixer		502
+
+  Mux			ID
+  ----------------------------
+
+  mout_hdmi		640
+
+  Divider		ID
+  ----------------------------
+
+  dout_pixel		768
 
 Example 1: An example of a clock controller node is listed below.
 

Documentation/devicetree/bindings/clock/imx5-clock.txt

@@ -197,6 +197,7 @@ clocks and IDs.
 	spdif0_gate		183
 	spdif1_gate		184
 	spdif_ipg_gate		185
+	ocram			186
 
 Examples (for mx53):
 

Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -209,6 +209,12 @@ clocks and IDs.
 	pll5_post_div		194
 	pll5_video_div		195
 	eim_slow      		196
+	spdif      		197
+	cko2_sel      		198
+	cko2_podf      		199
+	cko2      		200
+	cko      		201
+	vdoa      		202
 
 Examples:
 

Documentation/devicetree/bindings/clock/samsung,s3c64xx-clock.txt

@@ -0,0 +1,77 @@
+* Samsung S3C64xx Clock Controller
+
+The S3C64xx clock controller generates and supplies clock to various controllers
+within the SoC. The clock binding described here is applicable to all SoCs in
+the S3C64xx family.
+
+Required Properties:
+
+- compatible: should be one of the following.
+  - "samsung,s3c6400-clock" - controller compatible with S3C6400 SoC.
+  - "samsung,s3c6410-clock" - controller compatible with S3C6410 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Some of the clocks are available only
+on a particular S3C64xx SoC and this is specified where applicable.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/samsung,s3c64xx-clock.h header and can be used in device
+tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "fin_pll" - PLL input clock (xtal/extclk) - required,
+ - "xusbxti" - USB xtal - required,
+ - "iiscdclk0" - I2S0 codec clock - optional,
+ - "iiscdclk1" - I2S1 codec clock - optional,
+ - "iiscdclk2" - I2S2 codec clock - optional,
+ - "pcmcdclk0" - PCM0 codec clock - optional,
+ - "pcmcdclk1" - PCM1 codec clock - optional, only S3C6410.
+
+Example: Clock controller node:
+
+	clock: clock-controller@7e00f000 {
+		compatible = "samsung,s3c6410-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+Example: Required external clocks:
+
+	fin_pll: clock-fin-pll {
+		compatible = "fixed-clock";
+		clock-output-names = "fin_pll";
+		clock-frequency = <12000000>;
+		#clock-cells = <0>;
+	};
+
+	xusbxti: clock-xusbxti {
+		compatible = "fixed-clock";
+		clock-output-names = "xusbxti";
+		clock-frequency = <48000000>;
+		#clock-cells = <0>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+		uart0: serial@7f005000 {
+			compatible = "samsung,s3c6400-uart";
+			reg = <0x7f005000 0x100>;
+			interrupt-parent = <&vic1>;
+			interrupts = <5>;
+			clock-names = "uart", "clk_uart_baud2",
+					"clk_uart_baud3";
+			clocks = <&clock PCLK_UART0>, <&clocks PCLK_UART0>,
+					<&clock SCLK_UART>;
+			status = "disabled";
+		};

Documentation/devicetree/bindings/clock/st,nomadik.txt

@@ -17,7 +17,7 @@ Optional properties for the SRC node:
 - disable-mxtal: if present this will disable the MXTALO,
   i.e. the driver output for the main (~19.2 MHz) chrystal,
   if the board has its own circuitry for providing this
-  osciallator
+  oscillator
 
 
 PLL nodes: these nodes represent the two PLLs on the system,

Documentation/devicetree/bindings/clock/sunxi.txt

@@ -8,19 +8,31 @@ Required properties:
 - compatible : shall be one of the following:
 	"allwinner,sun4i-osc-clk" - for a gatable oscillator
 	"allwinner,sun4i-pll1-clk" - for the main PLL clock
+	"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
 	"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
 	"allwinner,sun4i-axi-clk" - for the AXI clock
 	"allwinner,sun4i-axi-gates-clk" - for the AXI gates
 	"allwinner,sun4i-ahb-clk" - for the AHB clock
 	"allwinner,sun4i-ahb-gates-clk" - for the AHB gates on A10
 	"allwinner,sun5i-a13-ahb-gates-clk" - for the AHB gates on A13
+	"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
+	"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
+	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
+	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
 	"allwinner,sun4i-apb0-clk" - for the APB0 clock
 	"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates on A10
 	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
+	"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
+	"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
 	"allwinner,sun4i-apb1-clk" - for the APB1 clock
 	"allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
 	"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates on A10
 	"allwinner,sun5i-a13-apb1-gates-clk" - for the APB1 gates on A13
+	"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
+	"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
+	"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
+	"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
+	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
 
 Required properties for all clocks:
 - reg : shall be the control register address for the clock.

Documentation/devicetree/bindings/clock/sunxi/sun5i-a10s-gates.txt

@@ -0,0 +1,75 @@
+Gate clock outputs
+------------------
+
+  * AXI gates ("allwinner,sun4i-axi-gates-clk")
+
+    DRAM					0
+
+  * AHB gates ("allwinner,sun5i-a10s-ahb-gates-clk")
+
+    USB0					0
+    EHCI0					1
+    OHCI0					2
+
+    SS						5
+    DMA						6
+    BIST					7
+    MMC0					8
+    MMC1					9
+    MMC2					10
+
+    NAND					13
+    SDRAM					14
+
+    EMAC					17
+    TS						18
+
+    SPI0					20
+    SPI1					21
+    SPI2					22
+
+    GPS						26
+
+    HSTIMER					28
+
+    VE						32
+
+    TVE						34
+
+    LCD						36
+
+    CSI						40
+
+    HDMI					43
+    DE_BE					44
+
+    DE_FE					46
+
+    IEP						51
+    MALI400					52
+
+  * APB0 gates ("allwinner,sun5i-a10s-apb0-gates-clk")
+
+    CODEC					0
+
+    IIS						3
+
+    PIO						5
+    IR						6
+
+    KEYPAD					10
+
+  * APB1 gates ("allwinner,sun5i-a10s-apb1-gates-clk")
+
+    I2C0					0
+    I2C1					1
+    I2C2					2
+
+    UART0					16
+    UART1					17
+    UART2					18
+    UART3					19
+
+Notation:
+ [*]:  The datasheet didn't mention these, but they are present on AW code
+ [**]: The datasheet had this marked as "NC" but they are used on AW code

Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt

@@ -0,0 +1,83 @@
+Gate clock outputs
+------------------
+
+  * AHB1 gates ("allwinner,sun6i-a31-ahb1-gates-clk")
+
+    MIPI DSI					1
+
+    SS						5
+    DMA						6
+
+    MMC0					8
+    MMC1					9
+    MMC2					10
+    MMC3					11
+
+    NAND1					12
+    NAND0					13
+    SDRAM					14
+
+    GMAC					17
+    TS						18
+    HSTIMER					19
+    SPI0					20
+    SPI1					21
+    SPI2					22
+    SPI3					23
+    USB_OTG					24
+
+    EHCI0					26
+    EHCI1					27
+
+    OHCI0					29
+    OHCI1					30
+    OHCI2					31
+    VE						32
+
+    LCD0					36
+    LCD1					37
+
+    CSI						40
+
+    HDMI					43
+    DE_BE0					44
+    DE_BE1					45
+    DE_FE1					46
+    DE_FE1					47
+
+    MP						50
+
+    GPU						52
+
+    DEU0					55
+    DEU1					56
+    DRC0					57
+    DRC1					58
+
+  * APB1 gates ("allwinner,sun6i-a31-apb1-gates-clk")
+
+    CODEC					0
+
+    DIGITAL MIC					4
+    PIO						5
+
+    DAUDIO0					12
+    DAUDIO1					13
+
+  * APB2 gates ("allwinner,sun6i-a31-apb2-gates-clk")
+
+    I2C0					0
+    I2C1					1
+    I2C2					2
+    I2C3					3
+
+    UART0					16
+    UART1					17
+    UART2					18
+    UART3					19
+    UART4					20
+    UART5					21
+
+Notation:
+ [*]:  The datasheet didn't mention these, but they are present on AW code
+ [**]: The datasheet had this marked as "NC" but they are used on AW code

Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt

@@ -0,0 +1,98 @@
+Gate clock outputs
+------------------
+
+  * AXI gates ("allwinner,sun4i-axi-gates-clk")
+
+    DRAM					0
+
+  * AHB gates ("allwinner,sun7i-a20-ahb-gates-clk")
+
+    USB0					0
+    EHCI0					1
+    OHCI0					2
+    EHCI1					3
+    OHCI1					4
+    SS						5
+    DMA						6
+    BIST					7
+    MMC0					8
+    MMC1					9
+    MMC2					10
+    MMC3					11
+    MS						12
+    NAND					13
+    SDRAM					14
+
+    ACE						16
+    EMAC					17
+    TS						18
+
+    SPI0					20
+    SPI1					21
+    SPI2					22
+    SPI3					23
+
+    SATA					25
+
+    HSTIMER					28
+
+    VE						32
+    TVD						33
+    TVE0					34
+    TVE1					35
+    LCD0					36
+    LCD1					37
+
+    CSI0					40
+    CSI1					41
+
+    HDMI1					42
+    HDMI0					43
+    DE_BE0					44
+    DE_BE1					45
+    DE_FE1					46
+    DE_FE1					47
+
+    GMAC					49
+    MP						50
+
+    MALI400					52
+
+  * APB0 gates ("allwinner,sun7i-a20-apb0-gates-clk")
+
+    CODEC					0
+    SPDIF					1
+    AC97					2
+    IIS0					3
+    IIS1					4
+    PIO						5
+    IR0						6
+    IR1						7
+    IIS2					8
+
+    KEYPAD					10
+
+  * APB1 gates ("allwinner,sun7i-a20-apb1-gates-clk")
+
+    I2C0					0
+    I2C1					1
+    I2C2					2
+    I2C3					3
+    CAN						4
+    SCR						5
+    PS20					6
+    PS21					7
+
+    I2C4					15
+    UART0					16
+    UART1					17
+    UART2					18
+    UART3					19
+    UART4					20
+    UART5					21
+    UART6					22
+    UART7					23
+
+Notation:
+ [*]:  The datasheet didn't mention these, but they are present on AW code
+ [**]: The datasheet had this marked as "NC" but they are used on AW code

Documentation/devicetree/bindings/crypto/fsl-sec6.txt

@@ -0,0 +1,157 @@
+SEC 6 is as Freescale's Cryptographic Accelerator and Assurance Module (CAAM).
+Currently Freescale powerpc chip C29X is embeded with SEC 6.
+SEC 6 device tree binding include:
+   -SEC 6 Node
+   -Job Ring Node
+   -Full Example
+
+=====================================================================
+SEC 6 Node
+
+Description
+
+    Node defines the base address of the SEC 6 block.
+    This block specifies the address range of all global
+    configuration registers for the SEC 6 block.
+    For example, In C293, we could see three SEC 6 node.
+
+PROPERTIES
+
+   - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v6.0".
+
+   - fsl,sec-era
+      Usage: optional
+      Value type: <u32>
+      Definition: A standard property. Define the 'ERA' of the SEC
+          device.
+
+   - #address-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing physical addresses in child nodes.
+
+   - #size-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing the size of physical addresses in
+           child nodes.
+
+   - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies the physical
+          address and length of the SEC 6 configuration registers.
+
+   - ranges
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: A standard property.  Specifies the physical address
+           range of the SEC 6.0 register space (-SNVS not included).  A
+           triplet that includes the child address, parent address, &
+           length.
+
+   Note: All other standard properties (see the ePAPR) are allowed
+   but are optional.
+
+EXAMPLE
+	crypto@a0000 {
+		compatible = "fsl,sec-v6.0";
+		fsl,sec-era = <6>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xa0000 0x20000>;
+		ranges = <0 0xa0000 0x20000>;
+	};
+
+=====================================================================
+Job Ring (JR) Node
+
+    Child of the crypto node defines data processing interface to SEC 6
+    across the peripheral bus for purposes of processing
+    cryptographic descriptors. The specified address
+    range can be made visible to one (or more) cores.
+    The interrupt defined for this node is controlled within
+    the address range of this node.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v6.0-job-ring".
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: Specifies a two JR parameters:  an offset from
+           the parent physical address and the length the JR registers.
+
+   - interrupts
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition:  Specifies the interrupts generated by this
+           device.  The value of the interrupts property
+           consists of one interrupt specifier. The format
+           of the specifier is defined by the binding document
+           describing the node's interrupt parent.
+
+EXAMPLE
+	jr@1000 {
+		compatible = "fsl,sec-v6.0-job-ring";
+		reg = <0x1000 0x1000>;
+		interrupts = <49 2 0 0>;
+	};
+
+===================================================================
+Full Example
+
+Since some chips may contain more than one SEC, the dtsi contains
+only the node contents, not the node itself.  A chip using the SEC
+should include the dtsi inside each SEC node.  Example:
+
+In qoriq-sec6.0.dtsi:
+
+	compatible = "fsl,sec-v6.0";
+	fsl,sec-era = <6>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	jr@1000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x1000 0x1000>;
+	};
+
+	jr@2000 {
+		compatible = "fsl,sec-v6.0-job-ring",
+			     "fsl,sec-v5.2-job-ring",
+			     "fsl,sec-v5.0-job-ring",
+			     "fsl,sec-v4.4-job-ring",
+			     "fsl,sec-v4.0-job-ring";
+		reg	   = <0x2000 0x1000>;
+	};
+
+In the C293 device tree, we add the include of public property:
+
+	crypto@a0000 {
+		/include/ "qoriq-sec6.0.dtsi"
+	}
+
+	crypto@a0000 {
+		reg = <0xa0000 0x20000>;
+		ranges = <0 0xa0000 0x20000>;
+
+		jr@1000 {
+			interrupts = <49 2 0 0>;
+		};
+
+		jr@2000 {
+			interrupts = <50 2 0 0>;
+		};
+	};

Documentation/devicetree/bindings/dma/atmel-dma.txt

@@ -18,14 +18,14 @@ dma0: dma@ffffec00 {
 
 DMA clients connected to the Atmel DMA controller must use the format
 described in the dma.txt file, using a three-cell specifier for each channel:
-a phandle plus two interger cells.
+a phandle plus two integer cells.
 The three cells in order are:
 
 1. A phandle pointing to the DMA controller.
 2. The memory interface (16 most significant bits), the peripheral interface
 (16 less significant bits).
 3. Parameters for the at91 DMA configuration register which are device
-dependant:
+dependent:
   - bit 7-0: peripheral identifier for the hardware handshaking interface. The
   identifier can be different for tx and rx.
   - bit 11-8: FIFO configuration. 0 for half FIFO, 1 for ALAP, 1 for ASAP.

Documentation/devicetree/bindings/dma/fsl-imx-dma.txt

@@ -34,7 +34,7 @@ Clients have to specify the DMA requests with phandles in a list.
 Required properties:
 - dmas: List of one or more DMA request specifiers. One DMA request specifier
     consists of a phandle to the DMA controller followed by the integer
-    specifiying the request line.
+    specifying the request line.
 - dma-names: List of string identifiers for the DMA requests. For the correct
     names, have a look at the specific client driver.
 

Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt

@@ -1,7 +1,12 @@
 * Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
 
 Required properties:
-- compatible : Should be "fsl,<chip>-sdma"
+- compatible : Should be "fsl,imx31-sdma", "fsl,imx31-to1-sdma",
+  "fsl,imx31-to2-sdma", "fsl,imx35-sdma", "fsl,imx35-to1-sdma",
+  "fsl,imx35-to2-sdma", "fsl,imx51-sdma", "fsl,imx53-sdma" or
+  "fsl,imx6q-sdma". The -to variants should be preferred since they
+  allow to determnine the correct ROM script addresses needed for
+  the driver to work without additional firmware.
 - reg : Should contain SDMA registers location and length
 - interrupts : Should contain SDMA interrupt
 - #dma-cells : Must be <3>.

Documentation/devicetree/bindings/dma/k3dma.txt

@@ -0,0 +1,46 @@
+* Hisilicon K3 DMA controller
+
+See dma.txt first
+
+Required properties:
+- compatible: Should be "hisilicon,k3-dma-1.0"
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain one interrupt shared by all channel
+- #dma-cells: see dma.txt, should be 1, para number
+- dma-channels: physical channels supported
+- dma-requests: virtual channels supported, each virtual channel
+		have specific request line
+- clocks: clock required
+
+Example:
+
+Controller:
+		dma0: dma@fcd02000 {
+			compatible = "hisilicon,k3-dma-1.0";
+			reg = <0xfcd02000 0x1000>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			dma-requests = <27>;
+			interrupts = <0 12 4>;
+			clocks = <&pclk>;
+			status = "disable";
+		};
+
+Client:
+Use specific request line passing from dmax
+For example, i2c0 read channel request line is 18, while write channel use 19
+
+		i2c0: i2c@fcb08000 {
+			compatible = "snps,designware-i2c";
+			dmas =	<&dma0 18          /* read channel */
+				 &dma0 19>;        /* write channel */
+			dma-names = "rx", "tx";
+		};
+
+		i2c1: i2c@fcb09000 {
+			compatible = "snps,designware-i2c";
+			dmas =	<&dma0 20          /* read channel */
+				 &dma0 21>;        /* write channel */
+			dma-names = "rx", "tx";
+		};
+

Documentation/devicetree/bindings/dma/shdma.txt

@@ -22,42 +22,51 @@ Optional properties (currently unused):
 * DMA controller
 
 Required properties:
-- compatible:	should be "renesas,shdma"
+- compatible:	should be of the form "renesas,shdma-<soc>", where <soc> should
+		be replaced with the desired SoC model, e.g.
+		"renesas,shdma-r8a73a4" for the system DMAC on r8a73a4 SoC
 
 Example:
-	dmac: dma-mux0 {
+	dmac: dma-multiplexer@0 {
 		compatible = "renesas,shdma-mux";
 		#dma-cells = <1>;
-		dma-channels = <6>;
+		dma-channels = <20>;
 		dma-requests = <256>;
-		reg = <0 0>;	/* Needed for AUXDATA */
-		#address-cells = <1>;
-		#size-cells = <1>;
+		#address-cells = <2>;
+		#size-cells = <2>;
 		ranges;
 
-		dma0: shdma@fe008020 {
-			compatible = "renesas,shdma";
-			reg = <0xfe008020 0x270>,
-				<0xfe009000 0xc>;
+		dma0: dma-controller@e6700020 {
+			compatible = "renesas,shdma-r8a73a4";
+			reg = <0 0xe6700020 0 0x89e0>;
 			interrupt-parent = <&gic>;
-			interrupts = <0 34 4
-					0 28 4
-					0 29 4
-					0 30 4
-					0 31 4
-					0 32 4
-					0 33 4>;
+			interrupts = <0 220 4
+					0 200 4
+					0 201 4
+					0 202 4
+					0 203 4
+					0 204 4
+					0 205 4
+					0 206 4
+					0 207 4
+					0 208 4
+					0 209 4
+					0 210 4
+					0 211 4
+					0 212 4
+					0 213 4
+					0 214 4
+					0 215 4
+					0 216 4
+					0 217 4
+					0 218 4
+					0 219 4>;
 			interrupt-names = "error",
 					"ch0", "ch1", "ch2", "ch3",
-					"ch4", "ch5";
-		};
-
-		dma1: shdma@fe018020 {
-			...
-		};
-
-		dma2: shdma@fe028020 {
-			...
+					"ch4", "ch5", "ch6", "ch7",
+					"ch8", "ch9", "ch10", "ch11",
+					"ch12", "ch13", "ch14", "ch15",
+					"ch16", "ch17", "ch18", "ch19";
 		};
 	};
 

Documentation/devicetree/bindings/dma/ste-dma40.txt

@@ -37,14 +37,14 @@ Each dmas request consists of 4 cells:
   1. A phandle pointing to the DMA controller
   2. Device Type
   3. The DMA request line number (only when 'use fixed channel' is set)
-  4. A 32bit mask specifying; mode, direction and endianess [NB: This list will grow]
+  4. A 32bit mask specifying; mode, direction and endianness [NB: This list will grow]
         0x00000001: Mode:
                 Logical channel when unset
                 Physical channel when set
         0x00000002: Direction:
                 Memory to Device when unset
                 Device to Memory when set
-        0x00000004: Endianess:
+        0x00000004: Endianness:
                 Little endian when unset
                 Big endian when set
         0x00000008: Use fixed channel:

Documentation/devicetree/bindings/extcon/extcon-palmas.txt

@@ -0,0 +1,15 @@
+EXTCON FOR PALMAS/TWL CHIPS
+
+PALMAS USB COMPARATOR
+Required Properties:
+ - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb"
+
+Optional Properties:
+ - ti,wakeup : To enable the wakeup comparator in probe
+ - ti,enable-id-detection: Perform ID detection.
+ - ti,enable-vbus-detection: Perform VBUS detection.
+
+palmas-usb {
+       compatible = "ti,twl6035-usb", "ti,palmas-usb";
+       ti,wakeup;
+};

Documentation/devicetree/bindings/extcon/extcon-twl.txt

@@ -1,15 +0,0 @@
-EXTCON FOR TWL CHIPS
-
-PALMAS USB COMPARATOR
-Required Properties:
- - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb"
- - vbus-supply : phandle to the regulator device tree node.
-
-Optional Properties:
- - ti,wakeup : To enable the wakeup comparator in probe
-
-palmas-usb {
-       compatible = "ti,twl6035-usb", "ti,palmas-usb";
-       vbus-supply = <&smps10_reg>;
-       ti,wakeup;
-};

Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt

@@ -3,10 +3,17 @@ Microchip MCP2308/MCP23S08/MCP23017/MCP23S17 driver for
 
 Required properties:
 - compatible : Should be
-    - "mcp,mcp23s08" for  8 GPIO SPI version
-    - "mcp,mcp23s17" for 16 GPIO SPI version
-    - "mcp,mcp23008" for  8 GPIO I2C version or
-    - "mcp,mcp23017" for 16 GPIO I2C version of the chip
+    - "mcp,mcp23s08" (DEPRECATED) for  8 GPIO SPI version
+    - "mcp,mcp23s17" (DEPRECATED) for 16 GPIO SPI version
+    - "mcp,mcp23008" (DEPRECATED) for  8 GPIO I2C version or
+    - "mcp,mcp23017" (DEPRECATED) for 16 GPIO I2C version of the chip
+
+    - "microchip,mcp23s08" for  8 GPIO SPI version
+    - "microchip,mcp23s17" for 16 GPIO SPI version
+    - "microchip,mcp23008" for  8 GPIO I2C version or
+    - "microchip,mcp23017" for 16 GPIO I2C version of the chip
+    NOTE: Do not use the old mcp prefix any more. It is deprecated and will be
+    removed.
 - #gpio-cells : Should be two.
   - first cell is the pin number
   - second cell is used to specify flags. Flags are currently unused.
@@ -15,10 +22,11 @@ Required properties:
         SPI uses this to specify the chipselect line which the chip is
         connected to. The driver and the SPI variant of the chip support
         multiple chips on the same chipselect. Have a look at
-        mcp,spi-present-mask below.
+        microchip,spi-present-mask below.
 
 Required device specific properties (only for SPI chips):
-- mcp,spi-present-mask : This is a present flag, that makes only sense for SPI
+- mcp,spi-present-mask (DEPRECATED)
+- microchip,spi-present-mask : This is a present flag, that makes only sense for SPI
         chips - as the name suggests. Multiple SPI chips can share the same
         SPI chipselect. Set a bit in bit0-7 in this mask to 1 if there is a
         chip connected with the corresponding spi address set. For example if
@@ -26,11 +34,13 @@ Required device specific properties (only for SPI chips):
         which is 0x08. mcp23s08 chip variant only supports bits 0-3. It is not
         possible to mix mcp23s08 and mcp23s17 on the same chipselect. Set at
         least one bit to 1 for SPI chips.
+    NOTE: Do not use the old mcp prefix any more. It is deprecated and will be
+    removed.
 - spi-max-frequency = The maximum frequency this chip is able to handle
 
 Example I2C:
 gpiom1: gpio@20 {
-        compatible = "mcp,mcp23017";
+        compatible = "microchip,mcp23017";
         gpio-controller;
         #gpio-cells = <2>;
         reg = <0x20>;
@@ -38,7 +48,7 @@ gpiom1: gpio@20 {
 
 Example SPI:
 gpiom1: gpio@0 {
-        compatible = "mcp,mcp23s17";
+        compatible = "microchip,mcp23s17";
         gpio-controller;
         #gpio-cells = <2>;
         spi-present-mask = <0x01>;

Documentation/devicetree/bindings/gpio/gpio-palmas.txt

@@ -0,0 +1,27 @@
+Palmas GPIO controller bindings
+
+Required properties:
+- compatible:
+  - "ti,palams-gpio" for palma series of the GPIO controller
+  - "ti,tps80036-gpio" for Palma series device TPS80036.
+  - "ti,tps65913-gpio" for palma series device TPS65913.
+  - "ti,tps65914-gpio" for palma series device TPS65914.
+- #gpio-cells : Should be two.
+  - first cell is the gpio pin number
+  - second cell is used to specify the gpio polarity:
+      0 = active high
+      1 = active low
+- gpio-controller : Marks the device node as a GPIO controller.
+
+Note: This gpio node will be sub node of palmas node.
+
+Example:
+	palmas: tps65913@58 {
+		:::::::::::
+		palmas_gpio: palmas_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+		:::::::::::
+	};

Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt

@@ -0,0 +1,45 @@
+ImgTec TZ1090 PDC GPIO Controller
+
+Required properties:
+- compatible: Compatible property value should be "img,tz1090-pdc-gpio".
+
+- reg: Physical base address of the controller and length of memory mapped
+  region. This starts at and cover the SOC_GPIO_CONTROL registers.
+
+- gpio-controller: Specifies that the node is a gpio controller.
+
+- #gpio-cells: Should be 2. The syntax of the gpio specifier used by client
+  nodes should have the following values.
+     <[phandle of the gpio controller node]
+      [PDC gpio number]
+      [gpio flags]>
+
+  Values for gpio specifier:
+  - GPIO number: a value in the range 0 to 6.
+  - GPIO flags: bit field of flags, as defined in <dt-bindings/gpio/gpio.h>.
+    Only the following flags are supported:
+      GPIO_ACTIVE_HIGH
+      GPIO_ACTIVE_LOW
+
+Optional properties:
+- gpio-ranges: Mapping to pin controller pins (as described in
+  Documentation/devicetree/bindings/gpio/gpio.txt)
+
+- interrupts: Individual syswake interrupts (other GPIOs cannot interrupt)
+
+
+Example:
+
+	pdc_gpios: gpio-controller@02006500 {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		compatible = "img,tz1090-pdc-gpio";
+		reg = <0x02006500 0x100>;
+
+		interrupt-parent = <&pdc>;
+		interrupts =	<8  IRQ_TYPE_NONE>,	/* Syswake 0 */
+				<9  IRQ_TYPE_NONE>,	/* Syswake 1 */
+				<10 IRQ_TYPE_NONE>;	/* Syswake 2 */
+		gpio-ranges = <&pdc_pinctrl 0 0 7>;
+	};

Documentation/devicetree/bindings/gpio/gpio-tz1090.txt

@@ -0,0 +1,88 @@
+ImgTec TZ1090 GPIO Controller
+
+Required properties:
+- compatible: Compatible property value should be "img,tz1090-gpio".
+
+- reg: Physical base address of the controller and length of memory mapped
+  region.
+
+- #address-cells: Should be 1 (for bank subnodes)
+
+- #size-cells: Should be 0 (for bank subnodes)
+
+- Each bank of GPIOs should have a subnode to represent it.
+
+  Bank subnode required properties:
+  - reg: Index of bank in the range 0 to 2.
+
+  - gpio-controller: Specifies that the node is a gpio controller.
+
+  - #gpio-cells: Should be 2. The syntax of the gpio specifier used by client
+    nodes should have the following values.
+       <[phandle of the gpio controller node]
+        [gpio number within the gpio bank]
+        [gpio flags]>
+
+    Values for gpio specifier:
+    - GPIO number: a value in the range 0 to 29.
+    - GPIO flags: bit field of flags, as defined in <dt-bindings/gpio/gpio.h>.
+      Only the following flags are supported:
+        GPIO_ACTIVE_HIGH
+        GPIO_ACTIVE_LOW
+
+  Bank subnode optional properties:
+  - gpio-ranges: Mapping to pin controller pins (as described in
+    Documentation/devicetree/bindings/gpio/gpio.txt)
+
+  - interrupts: Interrupt for the entire bank
+
+  - interrupt-controller: Specifies that the node is an interrupt controller
+
+  - #interrupt-cells: Should be 2. The syntax of the interrupt specifier used by
+    client nodes should have the following values.
+       <[phandle of the interurupt controller]
+        [gpio number within the gpio bank]
+        [irq flags]>
+
+    Values for irq specifier:
+    - GPIO number: a value in the range 0 to 29
+    - IRQ flags: value to describe edge and level triggering, as defined in
+      <dt-bindings/interrupt-controller/irq.h>. Only the following flags are
+      supported:
+        IRQ_TYPE_EDGE_RISING
+        IRQ_TYPE_EDGE_FALLING
+        IRQ_TYPE_EDGE_BOTH
+        IRQ_TYPE_LEVEL_HIGH
+        IRQ_TYPE_LEVEL_LOW
+
+
+
+Example:
+
+	gpios: gpio-controller@02005800 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "img,tz1090-gpio";
+		reg = <0x02005800 0x90>;
+
+		/* bank 0 with an interrupt */
+		gpios0: bank@0 {
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			reg = <0>;
+			interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 30>;
+			interrupt-controller;
+		};
+
+		/* bank 2 without interrupt */
+		gpios2: bank@2 {
+			#gpio-cells = <2>;
+			reg = <2>;
+			gpio-controller;
+			gpio-ranges = <&pinctrl 0 60 30>;
+		};
+	};
+
+

Documentation/devicetree/bindings/gpio/gpio.txt

@@ -75,23 +75,36 @@ Example of two SOC GPIO banks defined as gpio-controller nodes:
 		gpio-controller;
 	};
 
-2.1) gpio-controller and pinctrl subsystem
-------------------------------------------
+2.1) gpio- and pin-controller interaction
+-----------------------------------------
 
-gpio-controller on a SOC might be tightly coupled with the pinctrl
-subsystem, in the sense that the pins can be used by other functions
-together with optional gpio feature.
+Some or all of the GPIOs provided by a GPIO controller may be routed to pins
+on the package via a pin controller. This allows muxing those pins between
+GPIO and other functions.
 
-While the pin allocation is totally managed by the pin ctrl subsystem,
-gpio (under gpiolib) is still maintained by gpio drivers. It may happen
-that different pin ranges in a SoC is managed by different gpio drivers.
+It is useful to represent which GPIOs correspond to which pins on which pin
+controllers. The gpio-ranges property described below represents this, and
+contains information structures as follows:
 
-This makes it logical to let gpio drivers announce their pin ranges to
-the pin ctrl subsystem and call 'pinctrl_request_gpio' in order to
-request the corresponding pin before any gpio usage.
+	gpio-range-list ::= <single-gpio-range> [gpio-range-list]
+	single-gpio-range ::=
+			<pinctrl-phandle> <gpio-base> <pinctrl-base> <count>
+	gpio-phandle : phandle to pin controller node.
+	gpio-base : Base GPIO ID in the GPIO controller
+	pinctrl-base : Base pinctrl pin ID in the pin controller
+	count : The number of GPIOs/pins in this range
 
-For this, the gpio controller can use a pinctrl phandle and pins to
-announce the pinrange to the pin ctrl subsystem. For example,
+The "pin controller node" mentioned above must conform to the bindings
+described in ../pinctrl/pinctrl-bindings.txt.
+
+Previous versions of this binding required all pin controller nodes that
+were referenced by any gpio-ranges property to contain a property named
+#gpio-range-cells with value <3>. This requirement is now deprecated.
+However, that property may still exist in older device trees for
+compatibility reasons, and would still be required even in new device
+trees that need to be compatible with older software.
+
+Example:
 
 	qe_pio_e: gpio-controller@1460 {
 		#gpio-cells = <2>;
@@ -99,16 +112,8 @@ announce the pinrange to the pin ctrl subsystem. For example,
 		reg = <0x1460 0x18>;
 		gpio-controller;
 		gpio-ranges = <&pinctrl1 0 20 10>, <&pinctrl2 10 50 20>;
+	};
 
-    }
-
-where,
-   &pinctrl1 and &pinctrl2 is the phandle to the pinctrl DT node.
-
-   Next values specify the base pin and number of pins for the range
-   handled by 'qe_pio_e' gpio. In the given example from base pin 20 to
-   pin 29 under pinctrl1 with gpio offset 0 and pin 50 to pin 69 under
-   pinctrl2 with gpio offset 10 is handled by this gpio controller.
-
-The pinctrl node must have "#gpio-range-cells" property to show number of
-arguments to pass with phandle from gpio controllers node.
+Here, a single GPIO controller has GPIOs 0..9 routed to pin controller
+pinctrl1's pins 20..29, and GPIOs 10..19 routed to pin controller pinctrl2's
+pins 50..59.

Documentation/devicetree/bindings/gpio/mrvl-gpio.txt

@@ -10,8 +10,9 @@ Required properties:
   There're three gpio interrupts in arch-pxa, and they're gpio0,
   gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp,
   gpio_mux.
-- interrupt-name : Should be the name of irq resource. Each interrupt
-  binds its interrupt-name.
+- interrupt-names : Should be the names of irq resources. Each interrupt
+  uses its own interrupt name, so there should be as many interrupt names
+  as referenced interrups.
 - interrupt-controller : Identifies the node as an interrupt controller.
 - #interrupt-cells: Specifies the number of cells needed to encode an
   interrupt source.
@@ -24,7 +25,7 @@ Example:
 		compatible = "marvell,mmp-gpio";
 		reg = <0xd4019000 0x1000>;
 		interrupts = <49>;
-		interrupt-name = "gpio_mux";
+		interrupt-names = "gpio_mux";
 		gpio-controller;
 		#gpio-cells = <1>;
 		interrupt-controller;

Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt

@@ -23,6 +23,10 @@ Required Properties:
 Please refer to gpio.txt in this directory for details of gpio-ranges property
 and the common GPIO bindings used by client devices.
 
+The GPIO controller also acts as an interrupt controller. It uses the default
+two cells specifier as described in Documentation/devicetree/bindings/
+interrupt-controller/interrupts.txt.
+
 Example: R8A7779 (R-Car H1) GPIO controller nodes
 
 	gpio0: gpio@ffc40000 {
@@ -33,6 +37,8 @@ Example: R8A7779 (R-Car H1) GPIO controller nodes
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 0 32>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 	};
 	...
 	gpio6: gpio@ffc46000 {
@@ -43,4 +49,6 @@ Example: R8A7779 (R-Car H1) GPIO controller nodes
 		#gpio-cells = <2>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 192 9>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 	};

Documentation/devicetree/bindings/gpu/samsung-g2d.txt

@@ -11,8 +11,11 @@ Required properties:
 
   - interrupts : G2D interrupt number to the CPU.
   - clocks : from common clock binding: handle to G2D clocks.
-  - clock-names : from common clock binding: must contain "sclk_fimg2d" and
-		  "fimg2d", corresponding to entries in the clocks property.
+  - clock-names : names of clocks listed in clocks property, in the same
+		  order, depending on SoC type:
+		  - for S5PV210 and Exynos4 based SoCs: "fimg2d" and
+		    "sclk_fimg2d"
+		  - for Exynos5250 SoC: "fimg2d".
 
 Example:
 	g2d@12800000 {

Documentation/devicetree/bindings/gpu/samsung-rotator.txt

@@ -0,0 +1,27 @@
+* Samsung Image Rotator
+
+Required properties:
+  - compatible : value should be one of the following:
+	(a) "samsung,exynos4210-rotator" for Rotator IP in Exynos4210
+	(b) "samsung,exynos4212-rotator" for Rotator IP in Exynos4212/4412
+	(c) "samsung,exynos5250-rotator" for Rotator IP in Exynos5250
+
+  - reg : Physical base address of the IP registers and length of memory
+	  mapped region.
+
+  - interrupts : Interrupt specifier for rotator interrupt, according to format
+		 specific to interrupt parent.
+
+  - clocks : Clock specifier for rotator clock, according to generic clock
+	     bindings. (See Documentation/devicetree/bindings/clock/exynos*.txt)
+
+  - clock-names : Names of clocks. For exynos rotator, it should be "rotator".
+
+Example:
+	rotator@12810000 {
+		compatible = "samsung,exynos4210-rotator";
+		reg = <0x12810000 0x1000>;
+		interrupts = <0 83 0>;
+		clocks = <&clock 278>;
+		clock-names = "rotator";
+	};

Documentation/devicetree/bindings/hid/hid-over-i2c.txt

@@ -0,0 +1,28 @@
+* HID over I2C Device-Tree bindings
+
+HID over I2C provides support for various Human Interface Devices over the
+I2C bus. These devices can be for example touchpads, keyboards, touch screens
+or sensors.
+
+The specification has been written by Microsoft and is currently available here:
+http://msdn.microsoft.com/en-us/library/windows/hardware/hh852380.aspx
+
+If this binding is used, the kernel module i2c-hid will handle the communication
+with the device and the generic hid core layer will handle the protocol.
+
+Required properties:
+- compatible: must be "hid-over-i2c"
+- reg: i2c slave address
+- hid-descr-addr: HID descriptor address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: interrupt line
+
+Example:
+
+	i2c-hid-dev@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+		hid-descr-addr = <0x0020>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <3 2>;
+	};

Documentation/devicetree/bindings/i2c/i2c-imx.txt

@@ -1,7 +1,10 @@
 * Freescale Inter IC (I2C) and High Speed Inter IC (HS-I2C) for i.MX
 
 Required properties:
-- compatible : Should be "fsl,<chip>-i2c"
+- compatible :
+  - "fsl,imx1-i2c" for I2C compatible with the one integrated on i.MX1 SoC
+  - "fsl,imx21-i2c" for I2C compatible with the one integrated on i.MX21 SoC
+  - "fsl,vf610-i2c" for I2C compatible with the one integrated on Vybrid vf610 SoC
 - reg : Should contain I2C/HS-I2C registers location and length
 - interrupts : Should contain I2C/HS-I2C interrupt
 

Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt

@@ -5,6 +5,7 @@ Required properties :
 
  - reg             : Offset and length of the register set for the device
  - compatible      : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c"
+                     or "marvell,mv78230-i2c"
  - interrupts      : The interrupt number
 
 Optional properties :
@@ -20,3 +21,12 @@ Examples:
 		interrupts = <29>;
 		clock-frequency = <100000>;
 	};
+
+For the Armada XP:
+
+	i2c@11000 {
+		compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+		reg = <0x11000 0x100>;
+		interrupts = <29>;
+		clock-frequency = <100000>;
+	};

Documentation/devicetree/bindings/iio/accel/bma180.txt

@@ -0,0 +1,24 @@
+* Bosch BMA180 triaxial acceleration sensor
+
+http://omapworld.com/BMA180_111_1002839.pdf
+
+Required properties:
+
+  - compatible : should be "bosch,bma180"
+  - reg : the I2C address of the sensor
+
+Optional properties:
+
+  - interrupt-parent : should be the phandle for the interrupt controller
+
+  - interrupts : interrupt mapping for GPIO IRQ, it should by configured with
+		flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING
+
+Example:
+
+bma180@40 {
+	compatible = "bosch,bma180";
+	reg = <0x40>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+};

Documentation/devicetree/bindings/iio/adc/nuvoton-nau7802.txt

@@ -0,0 +1,18 @@
+* Nuvoton NAU7802 Analog to Digital Converter (ADC)
+
+Required properties:
+  - compatible: Should be "nuvoton,nau7802"
+  - reg: Should contain the ADC I2C address
+
+Optional properties:
+  - nuvoton,vldo: Internal reference voltage in millivolts to be
+    configured valid values are between 2400 mV and 4500 mV.
+  - interrupts: IRQ line for the ADC. If not used the driver will use
+    polling.
+
+Example:
+adc2: nau7802@2a {
+	compatible = "nuvoton,nau7802";
+	reg = <0x2a>;
+	nuvoton,vldo = <3000>;
+};

Documentation/devicetree/bindings/iio/light/apds9300.txt

@@ -0,0 +1,22 @@
+* Avago APDS9300 ambient light sensor
+
+http://www.avagotech.com/docs/AV02-1077EN
+
+Required properties:
+
+  - compatible : should be "avago,apds9300"
+  - reg : the I2C address of the sensor
+
+Optional properties:
+
+  - interrupt-parent : should be the phandle for the interrupt controller
+  - interrupts : interrupt mapping for GPIO IRQ
+
+Example:
+
+apds9300@39 {
+	compatible = "avago,apds9300";
+	reg = <0x39>;
+	interrupt-parent = <&gpio2>;
+	interrupts = <29 8>;
+};

Documentation/devicetree/bindings/input/input-reset.txt

@@ -0,0 +1,33 @@
+Input: sysrq reset sequence
+
+A simple binding to represent a set of keys as described in
+include/uapi/linux/input.h. This is to communicate a sequence of keys to the
+sysrq driver. Upon holding the keys for a specified amount of time (if
+specified) the system is sync'ed and reset.
+
+Key sequences are global to the system but all the keys in a set must be coming
+from the same input device.
+
+The /chosen node should contain a 'linux,sysrq-reset-seq' child node to define
+a set of keys.
+
+Required property:
+sysrq-reset-seq: array of Linux keycodes, one keycode per cell.
+
+Optional property:
+timeout-ms: duration keys must be pressed together in milliseconds before
+generating a sysrq. If omitted the system is rebooted immediately when a valid
+sequence has been recognized.
+
+Example:
+
+ chosen {
+                linux,sysrq-reset-seq {
+                        keyset = <0x03
+                                  0x04
+                                  0x0a>;
+                        timeout-ms = <3000>;
+                };
+         };
+
+Would represent KEY_2, KEY_3 and KEY_9.

Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt

@@ -6,7 +6,7 @@ Required properties:
 - interrupt-parent: the phandle for the interrupt controller
 - interrupts: touch controller interrupt
 - wakeup-gpios: the gpio pin to be used for waking up the controller
-  as well as uased as irq pin
+  and also used as irq pin
 
 Example:
 

Documentation/devicetree/bindings/leds/leds-lp55xx.txt

@@ -1,7 +1,7 @@
 Binding for TI/National Semiconductor LP55xx Led Drivers
 
 Required properties:
-- compatible: "national,lp5521" or "national,lp5523" or "ti,lp5562"
+- compatible: "national,lp5521" or "national,lp5523" or "ti,lp5562" or "ti,lp8501"
 - reg: I2C slave address
 - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
 
@@ -11,6 +11,11 @@ Each child has own specific current settings
 
 Optional properties:
 - label: Used for naming LEDs
+- pwr-sel: LP8501 specific property. Power selection for output channels.
+         0: D1~9 are connected to VDD
+         1: D1~6 with VDD, D7~9 with VOUT
+         2: D1~6 with VOUT, D7~9 with VDD
+         3: D1~9 are connected to VOUT
 
 Alternatively, each child can have specific channel name
 - chan-name: Name of each channel name
@@ -145,3 +150,68 @@ lp5562@30 {
 		max-cur = /bits/ 8 <0x60>;
 	};
 };
+
+example 4) LP8501
+9 channels are defined. The 'pwr-sel' is LP8501 specific property.
+Others are same as LP5523.
+
+lp8501@32 {
+	compatible = "ti,lp8501";
+	reg = <0x32>;
+	clock-mode = /bits/ 8 <2>;
+	pwr-sel = /bits/ 8 <3>;	/* D1~9 connected to VOUT */
+
+	chan0 {
+		chan-name = "d1";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan1 {
+		chan-name = "d2";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan2 {
+		chan-name = "d3";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan3 {
+		chan-name = "d4";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan4 {
+		chan-name = "d5";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan5 {
+		chan-name = "d6";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan6 {
+		chan-name = "d7";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan7 {
+		chan-name = "d8";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+
+	chan8 {
+		chan-name = "d9";
+		led-cur = /bits/ 8 <0x14>;
+		max-cur = /bits/ 8 <0x20>;
+	};
+};