Merge tag 'v3.2-rc7' into staging/for_v3.3

Linux 3.2-rc7

* tag 'v3.2-rc7': (1304 commits)
  Linux 3.2-rc7
  netfilter: xt_connbytes: handle negation correctly
  Btrfs: call d_instantiate after all ops are setup
  Btrfs: fix worker lock misuse in find_worker
  net: relax rcvbuf limits
  rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt()
  net: introduce DST_NOPEER dst flag
  mqprio: Avoid panic if no options are provided
  bridge: provide a mtu() method for fake_dst_ops
  md/bitmap: It is OK to clear bits during recovery.
  md: don't give up looking for spares on first failure-to-add
  md/raid5: ensure correct assessment of drives during degraded reshape.
  md/linear: fix hot-add of devices to linear arrays.
  sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().
  pata_of_platform: Add missing CONFIG_OF_IRQ dependency.
  ipv4: using prefetch requires including prefetch.h
  VFS: Fix race between CPU hotplug and lglocks
  vfs: __read_cache_page should use gfp argument rather than GFP_KERNEL
  USB: Fix usb/isp1760 build on sparc
  net: Add a flow_cache_flush_deferred function
  ...

Conflicts:
	drivers/media/common/tuners/tda18218.c
	drivers/media/video/omap3isp/ispccdc.c
	drivers/staging/media/as102/as102_drv.h

CREDITS

@@ -688,10 +688,13 @@ S: Oxfordshire, UK.
 
 N: Kees Cook
 E: kees@outflux.net
-W: http://outflux.net/
-P: 1024D/17063E6D 9FA3 C49C 23C9 D1BC 2E30  1975 1FFF 4BA9 1706 3E6D
-D: Minor updates to SCSI types, added /proc/pid/maps protection
+E: kees@ubuntu.com
+E: keescook@chromium.org
+W: http://outflux.net/blog/
+P: 4096R/DC6DC026 A5C3 F68F 229D D60F 723E  6E13 8972 F4DF DC6D C026
+D: Various security things, bug fixes, and documentation.
 S: (ask for current address)
+S: Portland, Oregon
 S: USA
 
 N: Robin Cornelius

Documentation/ABI/testing/sysfs-block

@@ -206,16 +206,3 @@ Description:
 		when a discarded area is read the discard_zeroes_data
 		parameter will be set to one. Otherwise it will be 0 and
 		the result of reading a discarded area is undefined.
-What:		/sys/block/<disk>/alias
-Date:		Aug 2011
-Contact:	Nao Nishijima <nao.nishijima.xt@hitachi.com>
-Description:
-		A raw device name of a disk does not always point a same disk
-		each boot-up time. Therefore, users have to use persistent
-		device names, which udev creates when the kernel finds a disk,
-		instead of raw device name. However, kernel doesn't show those
-		persistent names on its messages (e.g. dmesg).
-		This file can store an alias of the disk and it would be
-		appeared in kernel messages if it is set. A disk can have an
-		alias which length is up to 255bytes. Users can use alphabets,
-		numbers, "-" and "_" in alias name. This file is writeonce.

Documentation/ABI/testing/sysfs-bus-rbd

@@ -57,13 +57,6 @@ create_snap
 
 	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
 
-rollback_snap
-
-	Rolls back data to the specified snapshot. This goes over the entire
-	list of rados blocks and sends a rollback command to each.
-
-	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
-
 snap_*
 
 	A directory per each snapshot

Documentation/DocBook/uio-howto.tmpl

@@ -520,6 +520,11 @@ Here's a description of the fields of <varname>struct uio_mem</varname>:
 </para>
 
 <itemizedlist>
+<listitem><para>
+<varname>const char *name</varname>: Optional. Set this to help identify
+the memory region, it will show up in the corresponding sysfs node.
+</para></listitem>
+
 <listitem><para>
 <varname>int memtype</varname>: Required if the mapping is used. Set this to
 <varname>UIO_MEM_PHYS</varname> if you you have physical memory on your
@@ -553,7 +558,7 @@ instead to remember such an address.
 </itemizedlist>
 
 <para>
-Please do not touch the <varname>kobj</varname> element of
+Please do not touch the <varname>map</varname> element of
 <varname>struct uio_mem</varname>! It is used by the UIO framework
 to set up sysfs files for this mapping. Simply leave it alone.
 </para>

Documentation/blockdev/cciss.txt

@@ -98,14 +98,12 @@ You must enable "SCSI tape drive support for Smart Array 5xxx" and
 "SCSI support" in your kernel configuration to be able to use SCSI
 tape drives with your Smart Array 5xxx controller.
 
-Additionally, note that the driver will not engage the SCSI core at init 
-time.  The driver must be directed to dynamically engage the SCSI core via 
-the /proc filesystem entry which the "block" side of the driver creates as 
-/proc/driver/cciss/cciss* at runtime.  This is because at driver init time, 
-the SCSI core may not yet be initialized (because the driver is a block 
-driver) and attempting to register it with the SCSI core in such a case 
-would cause a hang.  This is best done via an initialization script 
-(typically in /etc/init.d, but could vary depending on distribution). 
+Additionally, note that the driver will engage the SCSI core at init
+time if any tape drives or medium changers are detected.  The driver may
+also be directed to dynamically engage the SCSI core via the /proc filesystem
+entry which the "block" side of the driver creates as
+/proc/driver/cciss/cciss* at runtime.  This is best done via a script.
+
 For example:
 
 	for x in /proc/driver/cciss/cciss[0-9]*

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -33,6 +33,7 @@ qcom	Qualcomm, Inc.
 ramtron	Ramtron International
 samsung	Samsung Semiconductor
 schindler	Schindler
+sil	Silicon Image
 simtek
 sirf	SiRF Technology, Inc.
 stericsson	ST-Ericsson

Documentation/filesystems/btrfs.txt

@@ -63,8 +63,8 @@ IRC network.
 Userspace tools for creating and manipulating Btrfs file systems are
 available from the git repository at the following location:
 
- http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs-unstable.git
- git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs-unstable.git
+ http://git.kernel.org/?p=linux/kernel/git/mason/btrfs-progs.git
+ git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs.git
 
 These include the following tools:
 

Documentation/i2c/ten-bit-addresses

@@ -1,22 +1,24 @@
 The I2C protocol knows about two kinds of device addresses: normal 7 bit
 addresses, and an extended set of 10 bit addresses. The sets of addresses
 do not intersect: the 7 bit address 0x10 is not the same as the 10 bit
-address 0x10 (though a single device could respond to both of them). You
-select a 10 bit address by adding an extra byte after the address
-byte:
-  S Addr7 Rd/Wr ....
-becomes
-  S 11110 Addr10 Rd/Wr
-S is the start bit, Rd/Wr the read/write bit, and if you count the number
-of bits, you will see the there are 8 after the S bit for 7 bit addresses,
-and 16 after the S bit for 10 bit addresses.
+address 0x10 (though a single device could respond to both of them).
 
-WARNING! The current 10 bit address support is EXPERIMENTAL. There are
-several places in the code that will cause SEVERE PROBLEMS with 10 bit
-addresses, even though there is some basic handling and hooks. Also,
-almost no supported adapter handles the 10 bit addresses correctly.
+I2C messages to and from 10-bit address devices have a different format.
+See the I2C specification for the details.
 
-As soon as a real 10 bit address device is spotted 'in the wild', we
-can and will add proper support. Right now, 10 bit address devices
-are defined by the I2C protocol, but we have never seen a single device
-which supports them.
+The current 10 bit address support is minimal. It should work, however
+you can expect some problems along the way:
+* Not all bus drivers support 10-bit addresses. Some don't because the
+  hardware doesn't support them (SMBus doesn't require 10-bit address
+  support for example), some don't because nobody bothered adding the
+  code (or it's there but not working properly.) Software implementation
+  (i2c-algo-bit) is known to work.
+* Some optional features do not support 10-bit addresses. This is the
+  case of automatic detection and instantiation of devices by their,
+  drivers, for example.
+* Many user-space packages (for example i2c-tools) lack support for
+  10-bit addresses.
+
+Note that 10-bit address devices are still pretty rare, so the limitations
+listed above could stay for a long time, maybe even forever if nobody
+needs them to be fixed.

Documentation/kernel-parameters.txt

@@ -315,12 +315,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			CPU-intensive style benchmark, and it can vary highly in
 			a microbenchmark depending on workload and compiler.
 
-			1: only for 32-bit processes
-			2: only for 64-bit processes
+			32: only for 32-bit processes
+			64: only for 64-bit processes
 			on: enable for both 32- and 64-bit processes
 			off: disable for both 32- and 64-bit processes
 
-	amd_iommu=	[HW,X86-84]
+	amd_iommu=	[HW,X86-64]
 			Pass parameters to the AMD IOMMU driver in the system.
 			Possible values are:
 			fullflush - enable flushing of IO/TLB entries when

Documentation/networking/ip-sysctl.txt

@@ -20,7 +20,7 @@ ip_no_pmtu_disc - BOOLEAN
 	default FALSE
 
 min_pmtu - INTEGER
-	default 562 - minimum discovered Path MTU
+	default 552 - minimum discovered Path MTU
 
 route/max_size - INTEGER
 	Maximum number of routes allowed in the kernel.  Increase
@@ -282,11 +282,11 @@ tcp_max_ssthresh - INTEGER
 	Default: 0 (off)
 
 tcp_max_syn_backlog - INTEGER
-	Maximal number of remembered connection requests, which are
-	still did not receive an acknowledgment from connecting client.
-	Default value is 1024 for systems with more than 128Mb of memory,
-	and 128 for low memory machines. If server suffers of overload,
-	try to increase this number.
+	Maximal number of remembered connection requests, which have not
+	received an acknowledgment from connecting client.
+	The minimal value is 128 for low memory machines, and it will
+	increase in proportion to the memory of machine.
+	If server suffers from overload, try increasing this number.
 
 tcp_max_tw_buckets - INTEGER
 	Maximal number of timewait sockets held by system simultaneously.

Documentation/power/devices.txt

@@ -123,9 +123,10 @@ please refer directly to the source code for more information about it.
 Subsystem-Level Methods
 -----------------------
 The core methods to suspend and resume devices reside in struct dev_pm_ops
-pointed to by the pm member of struct bus_type, struct device_type and
-struct class.  They are mostly of interest to the people writing infrastructure
-for buses, like PCI or USB, or device type and device class drivers.
+pointed to by the ops member of struct dev_pm_domain, or by the pm member of
+struct bus_type, struct device_type and struct class.  They are mostly of
+interest to the people writing infrastructure for platforms and buses, like PCI
+or USB, or device type and device class drivers.
 
 Bus drivers implement these methods as appropriate for the hardware and the
 drivers using it; PCI works differently from USB, and so on.  Not many people
@@ -139,41 +140,57 @@ sequencing in the driver model tree.
 
 /sys/devices/.../power/wakeup files
 -----------------------------------
-All devices in the driver model have two flags to control handling of wakeup
-events (hardware signals that can force the device and/or system out of a low
-power state).  These flags are initialized by bus or device driver code using
+All device objects in the driver model contain fields that control the handling
+of system wakeup events (hardware signals that can force the system out of a
+sleep state).  These fields are initialized by bus or device driver code using
 device_set_wakeup_capable() and device_set_wakeup_enable(), defined in
 include/linux/pm_wakeup.h.
 
-The "can_wakeup" flag just records whether the device (and its driver) can
+The "power.can_wakeup" flag just records whether the device (and its driver) can
 physically support wakeup events.  The device_set_wakeup_capable() routine
-affects this flag.  The "should_wakeup" flag controls whether the device should
-try to use its wakeup mechanism.  device_set_wakeup_enable() affects this flag;
-for the most part drivers should not change its value.  The initial value of
-should_wakeup is supposed to be false for the majority of devices; the major
-exceptions are power buttons, keyboards, and Ethernet adapters whose WoL
-(wake-on-LAN) feature has been set up with ethtool.  It should also default
-to true for devices that don't generate wakeup requests on their own but merely
-forward wakeup requests from one bus to another (like PCI bridges).
+affects this flag.  The "power.wakeup" field is a pointer to an object of type
+struct wakeup_source used for controlling whether or not the device should use
+its system wakeup mechanism and for notifying the PM core of system wakeup
+events signaled by the device.  This object is only present for wakeup-capable
+devices (i.e. devices whose "can_wakeup" flags are set) and is created (or
+removed) by device_set_wakeup_capable().
 
 Whether or not a device is capable of issuing wakeup events is a hardware
 matter, and the kernel is responsible for keeping track of it.  By contrast,
 whether or not a wakeup-capable device should issue wakeup events is a policy
 decision, and it is managed by user space through a sysfs attribute: the
-power/wakeup file.  User space can write the strings "enabled" or "disabled" to
-set or clear the "should_wakeup" flag, respectively.  This file is only present
-for wakeup-capable devices (i.e. devices whose "can_wakeup" flags are set)
-and is created (or removed) by device_set_wakeup_capable().  Reads from the
-file will return the corresponding string.
-
-The device_may_wakeup() routine returns true only if both flags are set.
+"power/wakeup" file.  User space can write the strings "enabled" or "disabled"
+to it to indicate whether or not, respectively, the device is supposed to signal
+system wakeup.  This file is only present if the "power.wakeup" object exists
+for the given device and is created (or removed) along with that object, by
+device_set_wakeup_capable().  Reads from the file will return the corresponding
+string.
+
+The "power/wakeup" file is supposed to contain the "disabled" string initially
+for the majority of devices; the major exceptions are power buttons, keyboards,
+and Ethernet adapters whose WoL (wake-on-LAN) feature has been set up with
+ethtool.  It should also default to "enabled" for devices that don't generate
+wakeup requests on their own but merely forward wakeup requests from one bus to
+another (like PCI Express ports).
+
+The device_may_wakeup() routine returns true only if the "power.wakeup" object
+exists and the corresponding "power/wakeup" file contains the string "enabled".
 This information is used by subsystems, like the PCI bus type code, to see
 whether or not to enable the devices' wakeup mechanisms.  If device wakeup
 mechanisms are enabled or disabled directly by drivers, they also should use
 device_may_wakeup() to decide what to do during a system sleep transition.
-However for runtime power management, wakeup events should be enabled whenever
-the device and driver both support them, regardless of the should_wakeup flag.
-
+Device drivers, however, are not supposed to call device_set_wakeup_enable()
+directly in any case.
+
+It ought to be noted that system wakeup is conceptually different from "remote
+wakeup" used by runtime power management, although it may be supported by the
+same physical mechanism.  Remote wakeup is a feature allowing devices in
+low-power states to trigger specific interrupts to signal conditions in which
+they should be put into the full-power state.  Those interrupts may or may not
+be used to signal system wakeup events, depending on the hardware design.  On
+some systems it is impossible to trigger them from system sleep states.  In any
+case, remote wakeup should always be enabled for runtime power management for
+all devices and drivers that support it.
 
 /sys/devices/.../power/control files
 ------------------------------------
@@ -249,20 +266,31 @@ for every device before the next phase begins.  Not all busses or classes
 support all these callbacks and not all drivers use all the callbacks.  The
 various phases always run after tasks have been frozen and before they are
 unfrozen.  Furthermore, the *_noirq phases run at a time when IRQ handlers have
-been disabled (except for those marked with the IRQ_WAKEUP flag).
-
-All phases use bus, type, or class callbacks (that is, methods defined in
-dev->bus->pm, dev->type->pm, or dev->class->pm).  These callbacks are mutually
-exclusive, so if the device type provides a struct dev_pm_ops object pointed to
-by its pm field (i.e. both dev->type and dev->type->pm are defined), the
-callbacks included in that object (i.e. dev->type->pm) will be used.  Otherwise,
-if the class provides a struct dev_pm_ops object pointed to by its pm field
-(i.e. both dev->class and dev->class->pm are defined), the PM core will use the
-callbacks from that object (i.e. dev->class->pm).  Finally, if the pm fields of
-both the device type and class objects are NULL (or those objects do not exist),
-the callbacks provided by the bus (that is, the callbacks from dev->bus->pm)
-will be used (this allows device types to override callbacks provided by bus
-types or classes if necessary).
+been disabled (except for those marked with the IRQF_NO_SUSPEND flag).
+
+All phases use PM domain, bus, type, or class callbacks (that is, methods
+defined in dev->pm_domain->ops, dev->bus->pm, dev->type->pm, or dev->class->pm).
+These callbacks are regarded by the PM core as mutually exclusive.  Moreover,
+PM domain callbacks always take precedence over bus, type and class callbacks,
+while type callbacks take precedence over bus and class callbacks, and class
+callbacks take precedence over bus callbacks.  To be precise, the following
+rules are used to determine which callback to execute in the given phase:
+
+    1.	If dev->pm_domain is present, the PM core will attempt to execute the
+	callback included in dev->pm_domain->ops.  If that callback is not
+	present, no action will be carried out for the given device.
+
+    2.	Otherwise, if both dev->type and dev->type->pm are present, the callback
+	included in dev->type->pm will be executed.
+
+    3.	Otherwise, if both dev->class and dev->class->pm are present, the
+	callback included in dev->class->pm will be executed.
+
+    4.	Otherwise, if both dev->bus and dev->bus->pm are present, the callback
+	included in dev->bus->pm will be executed.
+
+This allows PM domains and device types to override callbacks provided by bus
+types or device classes if necessary.
 
 These callbacks may in turn invoke device- or driver-specific methods stored in
 dev->driver->pm, but they don't have to.
@@ -283,9 +311,8 @@ When the system goes into the standby or memory sleep state, the phases are:
 
 	After the prepare callback method returns, no new children may be
 	registered below the device.  The method may also prepare the device or
-	driver in some way for the upcoming system power transition (for
-	example, by allocating additional memory required for this purpose), but
-	it should not put the device into a low-power state.
+	driver in some way for the upcoming system power transition, but it
+	should not put the device into a low-power state.
 
     2.	The suspend methods should quiesce the device to stop it from performing
 	I/O.  They also may save the device registers and put it into the

Documentation/power/runtime_pm.txt

@@ -44,25 +44,33 @@ struct dev_pm_ops {
 };
 
 The ->runtime_suspend(), ->runtime_resume() and ->runtime_idle() callbacks
-are executed by the PM core for either the power domain, or the device type
-(if the device power domain's struct dev_pm_ops does not exist), or the class
-(if the device power domain's and type's struct dev_pm_ops object does not
-exist), or the bus type (if the device power domain's, type's and class'
-struct dev_pm_ops objects do not exist) of the given device, so the priority
-order of callbacks from high to low is that power domain callbacks, device
-type callbacks, class callbacks and bus type callbacks, and the high priority
-one will take precedence over low priority one. The bus type, device type and
-class callbacks are referred to as subsystem-level callbacks in what follows,
-and generally speaking, the power domain callbacks are used for representing
-power domains within a SoC.
+are executed by the PM core for the device's subsystem that may be either of
+the following:
+
+  1. PM domain of the device, if the device's PM domain object, dev->pm_domain,
+     is present.
+
+  2. Device type of the device, if both dev->type and dev->type->pm are present.
+
+  3. Device class of the device, if both dev->class and dev->class->pm are
+     present.
+
+  4. Bus type of the device, if both dev->bus and dev->bus->pm are present.
+
+The PM core always checks which callback to use in the order given above, so the
+priority order of callbacks from high to low is: PM domain, device type, class
+and bus type.  Moreover, the high-priority one will always take precedence over
+a low-priority one.  The PM domain, bus type, device type and class callbacks
+are referred to as subsystem-level callbacks in what follows.
 
 By default, the callbacks are always invoked in process context with interrupts
 enabled.  However, subsystems can use the pm_runtime_irq_safe() helper function
-to tell the PM core that a device's ->runtime_suspend() and ->runtime_resume()
-callbacks should be invoked in atomic context with interrupts disabled.
-This implies that these callback routines must not block or sleep, but it also
-means that the synchronous helper functions listed at the end of Section 4 can
-be used within an interrupt handler or in an atomic context.
+to tell the PM core that their ->runtime_suspend(), ->runtime_resume() and
+->runtime_idle() callbacks may be invoked in atomic context with interrupts
+disabled for a given device.  This implies that the callback routines in
+question must not block or sleep, but it also means that the synchronous helper
+functions listed at the end of Section 4 may be used for that device within an
+interrupt handler or generally in an atomic context.
 
 The subsystem-level suspend callback is _entirely_ _responsible_ for handling
 the suspend of the device as appropriate, which may, but need not include

Documentation/serial/serial-rs485.txt

@@ -97,15 +97,23 @@
 
 	struct serial_rs485 rs485conf;
 
-	/* Set RS485 mode: */
+	/* Enable RS485 mode: */
 	rs485conf.flags |= SER_RS485_ENABLED;
 
+	/* Set logical level for RTS pin equal to 1 when sending: */
+	rs485conf.flags |= SER_RS485_RTS_ON_SEND;
+	/* or, set logical level for RTS pin equal to 0 when sending: */
+	rs485conf.flags &= ~(SER_RS485_RTS_ON_SEND);
+
+	/* Set logical level for RTS pin equal to 1 after sending: */
+	rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
+	/* or, set logical level for RTS pin equal to 0 after sending: */
+	rs485conf.flags &= ~(SER_RS485_RTS_AFTER_SEND);
+
 	/* Set rts delay before send, if needed: */
-	rs485conf.flags |= SER_RS485_RTS_BEFORE_SEND;
 	rs485conf.delay_rts_before_send = ...;
 
 	/* Set rts delay after send, if needed: */
-	rs485conf.flags |= SER_RS485_RTS_AFTER_SEND;
 	rs485conf.delay_rts_after_send = ...;
 
 	/* Set this flag if you want to receive data even whilst sending data */

Documentation/sound/alsa/HD-Audio.txt

@@ -579,7 +579,7 @@ Development Tree
 ~~~~~~~~~~~~~~~~
 The latest development codes for HD-audio are found on sound git tree:
 
-- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
 
 The master branch or for-next branches can be used as the main
 development branches in general while the HD-audio specific patches
@@ -594,7 +594,7 @@ is, installed via the usual spells: configure, make and make
 install(-modules).  See INSTALL in the package.  The snapshot tarballs
 are found at:
 
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
+- ftp://ftp.suse.com/pub/people/tiwai/snapshot/
 
 
 Sending a Bug Report
@@ -696,7 +696,7 @@ via hda-verb won't change the mixer value.
 
 The hda-verb program is found in the ftp directory:
 
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
 
 Also a git repository is available:
 
@@ -764,7 +764,7 @@ operation, the jack plugging simulation, etc.
 
 The package is found in:
 
-- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+- ftp://ftp.suse.com/pub/people/tiwai/misc/
 
 A git repository is available:
 

Documentation/sound/alsa/soc/machine.txt

@@ -50,8 +50,7 @@ Machine DAI Configuration
 The machine DAI configuration glues all the codec and CPU DAIs together. It can
 also be used to set up the DAI system clock and for any machine related DAI
 initialisation e.g. the machine audio map can be connected to the codec audio
-map, unconnected codec pins can be set as such. Please see corgi.c, spitz.c
-for examples.
+map, unconnected codec pins can be set as such.
 
 struct snd_soc_dai_link is used to set up each DAI in your machine. e.g.
 
@@ -83,8 +82,7 @@ Machine Power Map
 The machine driver can optionally extend the codec power map and to become an
 audio power map of the audio subsystem. This allows for automatic power up/down
 of speaker/HP amplifiers, etc. Codec pins can be connected to the machines jack
-sockets in the machine init function. See soc/pxa/spitz.c and dapm.txt for
-details.
+sockets in the machine init function.
 
 
 Machine Controls

Documentation/usb/linux-cdc-acm.inf

@@ -90,10 +90,10 @@ ServiceBinary=%12%\USBSER.sys
 [SourceDisksFiles]
 [SourceDisksNames]
 [DeviceList]
-%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00
 
 [DeviceList.NTamd64]
-%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02
+%DESCRIPTION%=DriverInstall, USB\VID_0525&PID_A4A7, USB\VID_1D6B&PID_0104&MI_02, USB\VID_1D6B&PID_0106&MI_00
 
 
 ;------------------------------------------------------------------------------

MAINTAINERS

@@ -511,8 +511,8 @@ M:	Joerg Roedel <joerg.roedel@amd.com>
 L:	iommu@lists.linux-foundation.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git
 S:	Supported
-F:	arch/x86/kernel/amd_iommu*.c
-F:	arch/x86/include/asm/amd_iommu*.h
+F:	drivers/iommu/amd_iommu*.[ch]
+F:	include/linux/amd-iommu.h
 
 AMD MICROCODE UPDATE SUPPORT
 M:	Andreas Herrmann <andreas.herrmann3@amd.com>
@@ -789,6 +789,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.pengutronix.de/git/imx/linux-2.6.git
 F:	arch/arm/mach-mx*/
+F:	arch/arm/mach-imx/
 F:	arch/arm/plat-mxc/
 
 ARM/FREESCALE IMX51
@@ -804,6 +805,13 @@ S:	Maintained
 T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
 F:	arch/arm/mach-imx/*imx6*
 
+ARM/FREESCALE MXS ARM ARCHITECTURE
+M:	Shawn Guo <shawn.guo@linaro.org>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+T:	git git://git.linaro.org/people/shawnguo/linux-2.6.git
+F:	arch/arm/mach-mxs/
+
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1046,35 +1054,18 @@ ARM/SAMSUNG ARM ARCHITECTURES
 M:	Ben Dooks <ben-linux@fluff.org>
 M:	Kukjin Kim <kgene.kim@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/plat-samsung/
 F:	arch/arm/plat-s3c24xx/
 F:	arch/arm/plat-s5p/
+F:	arch/arm/mach-s3c24*/
+F:	arch/arm/mach-s3c64xx/
 F:	drivers/*/*s3c2410*
 F:	drivers/*/*/*s3c2410*
-
-ARM/S3C2410 ARM ARCHITECTURE
-M:	Ben Dooks <ben-linux@fluff.org>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.fluff.org/ben/linux/
-S:	Maintained
-F:	arch/arm/mach-s3c2410/
-
-ARM/S3C244x ARM ARCHITECTURE
-M:	Ben Dooks <ben-linux@fluff.org>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.fluff.org/ben/linux/
-S:	Maintained
-F:	arch/arm/mach-s3c2440/
-F:	arch/arm/mach-s3c2443/
-
-ARM/S3C64xx ARM ARCHITECTURE
-M:	Ben Dooks <ben-linux@fluff.org>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.fluff.org/ben/linux/
-S:	Maintained
-F:	arch/arm/mach-s3c64xx/
+F:	drivers/spi/spi-s3c*
+F:	sound/soc/samsung/*
 
 ARM/S5P EXYNOS ARM ARCHITECTURES
 M:	Kukjin Kim <kgene.kim@samsung.com>
@@ -1789,6 +1780,14 @@ F:	include/net/cfg80211.h
 F:	net/wireless/*
 X:	net/wireless/wext*
 
+CHAR and MISC DRIVERS
+M:	Arnd Bergmann <arnd@arndb.de>
+M:	Greg Kroah-Hartman <greg@kroah.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
+S:	Maintained
+F:	drivers/char/*
+F:	drivers/misc/*
+
 CHECKPATCH
 M:	Andy Whitcroft <apw@canonical.com>
 S:	Supported
@@ -1927,9 +1926,11 @@ S:	Maintained
 F:	drivers/connector/
 
 CONTROL GROUPS (CGROUPS)
-M:	Paul Menage <paul@paulmenage.org>
+M:	Tejun Heo <tj@kernel.org>
 M:	Li Zefan <lizf@cn.fujitsu.com>
 L:	containers@lists.linux-foundation.org
+L:	cgroups@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
 S:	Maintained
 F:	include/linux/cgroup*
 F:	kernel/cgroup*
@@ -2584,7 +2585,7 @@ S:	Maintained
 F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <shemminger@linux-foundation.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -3108,6 +3109,7 @@ F:	include/linux/hid*
 
 HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
 M:	Thomas Gleixner <tglx@linutronix.de>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Maintained
 F:	Documentation/timers/
 F:	kernel/hrtimer.c
@@ -3617,7 +3619,7 @@ F:	net/irda/
 IRQ SUBSYSTEM
 M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git irq/core
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:	kernel/irq/
 
 ISAPNP
@@ -3726,7 +3728,7 @@ F:	fs/jbd2/
 F:	include/linux/jbd2.h
 
 JSM Neo PCI based serial card
-M:	Breno Leitao <leitao@linux.vnet.ibm.com>
+M:	Lucas Tavares <lucaskt@linux.vnet.ibm.com>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial/jsm/
@@ -4105,7 +4107,7 @@ F:	drivers/hwmon/lm90.c
 LOCKDEP AND LOCKSTAT
 M:	Peter Zijlstra <peterz@infradead.org>
 M:	Ingo Molnar <mingo@redhat.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git core/locking
 S:	Maintained
 F:	Documentation/lockdep*.txt
 F:	Documentation/lockstat.txt
@@ -4287,7 +4289,9 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	Documentation/dvb/
 F:	Documentation/video4linux/
+F:	Documentation/DocBook/media/
 F:	drivers/media/
+F:	drivers/staging/media/
 F:	include/media/
 F:	include/linux/dvb/
 F:	include/linux/videodev*.h
@@ -4309,9 +4313,11 @@ F:	include/linux/mm.h
 F:	mm/
 
 MEMORY RESOURCE CONTROLLER
+M:	Johannes Weiner <hannes@cmpxchg.org>
+M:	Michal Hocko <mhocko@suse.cz>
 M:	Balbir Singh <bsingharora@gmail.com>
-M:	Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
 M:	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
+L:	cgroups@vger.kernel.org
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/memcontrol.c
@@ -4345,7 +4351,7 @@ MIPS
 M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-mips@linux-mips.org
 W:	http://www.linux-mips.org/
-T:	git git://git.linux-mips.org/pub/scm/linux.git
+T:	git git://git.linux-mips.org/pub/scm/ralf/linux.git
 Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
 S:	Supported
 F:	Documentation/mips/
@@ -4478,7 +4484,7 @@ S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <shemminger@linux-foundation.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
@@ -4955,7 +4961,7 @@ F:	drivers/char/ppdev.c
 F:	include/linux/ppdev.h
 
 PARAVIRT_OPS INTERFACE
-M:	Jeremy Fitzhardinge <jeremy@xensource.com>
+M:	Jeremy Fitzhardinge <jeremy@goop.org>
 M:	Chris Wright <chrisw@sous-sol.org>
 M:	Alok Kataria <akataria@vmware.com>
 M:	Rusty Russell <rusty@rustcorp.com.au>
@@ -5091,6 +5097,7 @@ M:	Peter Zijlstra <a.p.zijlstra@chello.nl>
 M:	Paul Mackerras <paulus@samba.org>
 M:	Ingo Molnar <mingo@elte.hu>
 M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Supported
 F:	kernel/events/*
 F:	include/linux/perf_event.h
@@ -5170,6 +5177,7 @@ F:	drivers/scsi/pm8001/
 
 POSIX CLOCKS and TIMERS
 M:	Thomas Gleixner <tglx@linutronix.de>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Supported
 F:	fs/timerfd.c
 F:	include/linux/timer*
@@ -5664,7 +5672,6 @@ F:	drivers/media/video/*7146*
 F:	include/media/*7146*
 
 SAMSUNG AUDIO (ASoC) DRIVERS
-M:	Jassi Brar <jassisinghbrar@gmail.com>
 M:	Sangbeom Kim <sbkim73@samsung.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
@@ -5686,6 +5693,7 @@ F:	drivers/dma/dw_dmac.c
 TIMEKEEPING, NTP
 M:	John Stultz <johnstul@us.ibm.com>
 M:	Thomas Gleixner <tglx@linutronix.de>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Supported
 F:	include/linux/clocksource.h
 F:	include/linux/time.h
@@ -5710,6 +5718,7 @@ F:	drivers/watchdog/sc1200wdt.c
 SCHEDULER
 M:	Ingo Molnar <mingo@elte.hu>
 M:	Peter Zijlstra <peterz@infradead.org>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
 S:	Maintained
 F:	kernel/sched*
 F:	include/linux/sched.h
@@ -5993,7 +6002,7 @@ S:	Maintained
 F:	drivers/usb/misc/sisusbvga/
 
 SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
-M:	Stephen Hemminger <shemminger@linux-foundation.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@@ -6637,7 +6646,7 @@ TRACING
 M:	Steven Rostedt <rostedt@goodmis.org>
 M:	Frederic Weisbecker <fweisbec@gmail.com>
 M:	Ingo Molnar <mingo@redhat.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git perf/core
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Maintained
 F:	Documentation/trace/ftrace.txt
 F:	arch/*/*/*/ftrace.h
@@ -7387,7 +7396,7 @@ M:	Thomas Gleixner <tglx@linutronix.de>
 M:	Ingo Molnar <mingo@redhat.com>
 M:	"H. Peter Anvin" <hpa@zytor.com>
 M:	x86@kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
 S:	Maintained
 F:	Documentation/x86/
 F:	arch/x86/
@@ -7407,8 +7416,8 @@ S:	Maintained
 F:	arch/x86/kernel/cpu/mcheck/*
 
 XEN HYPERVISOR INTERFACE
-M:	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
 M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+M:	Jeremy Fitzhardinge <jeremy@goop.org>
 L:	xen-devel@lists.xensource.com (moderated for non-subscribers)
 L:	virtualization@lists.linux-foundation.org
 S:	Supported
@@ -7441,7 +7450,8 @@ F:	drivers/xen/*swiotlb*
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
-M:	Alex Elder <aelder@sgi.com>
+M:	Ben Myers <bpm@sgi.com>
+M:	Alex Elder <elder@kernel.org>
 M:	xfs-masters@oss.sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc7
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -220,8 +220,9 @@ config NEED_MACH_MEMORY_H
 	  be avoided when possible.
 
 config PHYS_OFFSET
-	hex "Physical address of main memory"
+	hex "Physical address of main memory" if MMU
 	depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+	default DRAM_BASE if !MMU
 	help
 	  Please provide the physical address corresponding to the
 	  location of main memory in your system.
@@ -1231,7 +1232,7 @@ config ARM_ERRATA_742231
 	  capabilities of the processor.
 
 config PL310_ERRATA_588369
-	bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
+	bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
 	depends on CACHE_L2X0
 	help
 	   The PL310 L2 cache controller implements three types of Clean &
@@ -1256,7 +1257,7 @@ config ARM_ERRATA_720789
 	  entries regardless of the ASID.
 
 config PL310_ERRATA_727915
-	bool "Background Clean & Invalidate by Way operation can cause data corruption"
+	bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
 	depends on CACHE_L2X0
 	help
 	  PL310 implements the Clean & Invalidate by Way L2 cache maintenance
@@ -1289,8 +1290,8 @@ config ARM_ERRATA_751472
 	  operation is received by a CPU before the ICIALLUIS has completed,
 	  potentially leading to corrupted entries in the cache or TLB.
 
-config ARM_ERRATA_753970
-	bool "ARM errata: cache sync operation may be faulty"
+config PL310_ERRATA_753970
+	bool "PL310 errata: cache sync operation may be faulty"
 	depends on CACHE_PL310
 	help
 	  This option enables the workaround for the 753970 PL310 (r3p0) erratum.
@@ -1352,6 +1353,18 @@ config ARM_ERRATA_764369
 	  relevant cache maintenance functions and sets a specific bit
 	  in the diagnostic control register of the SCU.
 
+config PL310_ERRATA_769419
+	bool "PL310 errata: no automatic Store Buffer drain"
+	depends on CACHE_L2X0
+	help
+	  On revisions of the PL310 prior to r3p2, the Store Buffer does
+	  not automatically drain. This can cause normal, non-cacheable
+	  writes to be retained when the memory system is idle, leading
+	  to suboptimal I/O performance for drivers using coherent DMA.
+	  This option adds a write barrier to the cpu_idle loop so that,
+	  on systems with an outer cache, the store buffer is drained
+	  explicitly.
+
 endmenu
 
 source "arch/arm/common/Kconfig"

arch/arm/boot/Makefile

@@ -65,6 +65,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts
 
 $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
 
+clean-files := *.dtb
+
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
 		   -C none -a $(LOADADDR) -e $(STARTADDR) \

arch/arm/common/gic.c

@@ -526,7 +526,8 @@ static void __init gic_pm_init(struct gic_chip_data *gic)
 		sizeof(u32));
 	BUG_ON(!gic->saved_ppi_conf);
 
-	cpu_pm_register_notifier(&gic_notifier_block);
+	if (gic == &gic_data[0])
+		cpu_pm_register_notifier(&gic_notifier_block);
 }
 #else
 static void __init gic_pm_init(struct gic_chip_data *gic)
@@ -581,13 +582,16 @@ void __init gic_init(unsigned int gic_nr, int irq_start,
 	 * For primary GICs, skip over SGIs.
 	 * For secondary GICs, skip over PPIs, too.
 	 */
+	domain->hwirq_base = 32;
 	if (gic_nr == 0) {
 		gic_cpu_base_addr = cpu_base;
-		domain->hwirq_base = 16;
-		if (irq_start > 0)
-			irq_start = (irq_start & ~31) + 16;
-	} else
-		domain->hwirq_base = 32;
+
+		if ((irq_start & 31) > 0) {
+			domain->hwirq_base = 16;
+			if (irq_start != -1)
+				irq_start = (irq_start & ~31) + 16;
+		}
+	}
 
 	/*
 	 * Find out how many interrupts are supported.

arch/arm/common/pl330.c

@@ -1211,8 +1211,8 @@ static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
 	ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
 	ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
 
-	ccr |= (rqc->dcctl << CC_SRCCCTRL_SHFT);
-	ccr |= (rqc->scctl << CC_DSTCCTRL_SHFT);
+	ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
+	ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
 
 	ccr |= (rqc->swap << CC_SWAP_SHFT);
 
@@ -1623,6 +1623,11 @@ static inline int _alloc_event(struct pl330_thread *thrd)
 	return -1;
 }
 
+static bool _chan_ns(const struct pl330_info *pi, int i)
+{
+	return pi->pcfg.irq_ns & (1 << i);
+}
+
 /* Upon success, returns IdentityToken for the
  * allocated channel, NULL otherwise.
  */
@@ -1647,7 +1652,8 @@ void *pl330_request_channel(const struct pl330_info *pi)
 
 	for (i = 0; i < chans; i++) {
 		thrd = &pl330->channels[i];
-		if (thrd->free) {
+		if ((thrd->free) && (!_manager_ns(thrd) ||
+					_chan_ns(pi, i))) {
 			thrd->ev = _alloc_event(thrd);
 			if (thrd->ev >= 0) {
 				thrd->free = false;

arch/arm/configs/at91cap9adk_defconfig → arch/arm/configs/at91cap9_defconfig

@@ -38,7 +38,6 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -52,16 +51,12 @@ CONFIG_MTD_NAND_ATMEL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
@@ -81,7 +76,6 @@ CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
@@ -99,7 +93,6 @@ CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y

arch/arm/configs/at91rm9200_defconfig

@@ -5,7 +5,6 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
@@ -56,7 +55,6 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
@@ -75,18 +73,8 @@ CONFIG_IPV6_TUNNEL=m
 CONFIG_BRIDGE=m
 CONFIG_VLAN_8021Q=m
 CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_AFS_PARTS=y
 CONFIG_MTD_CHAR=y
@@ -108,8 +96,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_TCLIB=y
-CONFIG_EEPROM_LEGACY=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=m
@@ -119,14 +105,23 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_TUN=m
+CONFIG_ARM_AT91_ETHER=y
 CONFIG_PHYLIB=y
 CONFIG_DAVICOM_PHY=y
 CONFIG_SMSC_PHY=y
 CONFIG_MICREL_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_PPP=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=y
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
 CONFIG_USB_CATC=m
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
@@ -139,18 +134,6 @@ CONFIG_USB_NET_RNDIS_HOST=m
 CONFIG_USB_ALI_M5632=y
 CONFIG_USB_AN2720=y
 CONFIG_USB_EPSON2888=y
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
@@ -158,9 +141,9 @@ CONFIG_INPUT_EVDEV=y
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_LEGACY_PTY_COUNT=32
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
 CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
@@ -290,7 +273,6 @@ CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
-CONFIG_SMB_FS=m
 CONFIG_CIFS=m
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_MAC_PARTITION=y
@@ -335,7 +317,6 @@ CONFIG_NLS_UTF8=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_FTRACE is not set
 CONFIG_CRYPTO_PCBC=y
 CONFIG_CRYPTO_SHA1=y

arch/arm/configs/at91sam9260ek_defconfig → arch/arm/configs/at91sam9260_defconfig

@@ -12,11 +12,23 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9260=y
+CONFIG_ARCH_AT91SAM9260_SAM9XE=y
 CONFIG_MACH_AT91SAM9260EK=y
+CONFIG_MACH_CAM60=y
+CONFIG_MACH_SAM9_L9260=y
+CONFIG_MACH_AFEB9260=y
+CONFIG_MACH_USB_A9260=y
+CONFIG_MACH_QIL_A9260=y
+CONFIG_MACH_CPU9260=y
+CONFIG_MACH_FLEXIBITY=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
@@ -33,12 +45,10 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
@@ -55,7 +65,6 @@ CONFIG_I2C_GPIO=y
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
@@ -71,7 +80,6 @@ CONFIG_USB_G_SERIAL=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_CRAMFS=y

arch/arm/configs/at91sam9g20ek_defconfig → arch/arm/configs/at91sam9g20_defconfig

@@ -14,6 +14,15 @@ CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9G20=y
 CONFIG_MACH_AT91SAM9G20EK=y
 CONFIG_MACH_AT91SAM9G20EK_2MMC=y
+CONFIG_MACH_CPU9G20=y
+CONFIG_MACH_ACMENETUSFOXG20=y
+CONFIG_MACH_PORTUXG20=y
+CONFIG_MACH_STAMP9G20=y
+CONFIG_MACH_PCONTROL_G20=y
+CONFIG_MACH_GSIA18S=y
+CONFIG_MACH_USB_A9G20=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_AEABI=y
@@ -21,9 +30,10 @@ CONFIG_LEDS=y
 CONFIG_LEDS_CPU=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
 CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -37,8 +47,6 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IPV6 is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -48,17 +56,13 @@ CONFIG_MTD_NAND_ATMEL=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
@@ -66,15 +70,14 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_HW_RANDOM=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_SPIDEV=y
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SEQUENCER=y
@@ -82,7 +85,6 @@ CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_AT73C213=y
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
@@ -105,7 +107,6 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y

arch/arm/configs/at91sam9g45_defconfig

@@ -18,6 +18,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9G45=y
 CONFIG_MACH_AT91SAM9M10G45EK=y
+CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_SLOW_CLOCK=y
 CONFIG_AEABI=y
@@ -73,11 +74,8 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_NETDEVICES=y
 CONFIG_MII=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_DAVICOM_PHY=y
 CONFIG_LIBERTAS_THINFIRM=m
 CONFIG_LIBERTAS_THINFIRM_USB=m
 CONFIG_AT76C50X_USB=m
@@ -131,7 +129,6 @@ CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 # CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
 CONFIG_FB_UDL=m

arch/arm/configs/at91sam9rlek_defconfig → arch/arm/configs/at91sam9rl_defconfig

@@ -23,8 +23,6 @@ CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
@@ -35,7 +33,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=4
 CONFIG_BLK_DEV_RAM_SIZE=24576
-CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
@@ -62,13 +59,11 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_MMC=y
 CONFIG_MMC_AT91=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y

arch/arm/configs/ezx_defconfig

@@ -287,7 +287,7 @@ CONFIG_USB=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_MMC=y

arch/arm/configs/imote2_defconfig

@@ -263,7 +263,7 @@ CONFIG_USB=y
 # CONFIG_USB_DEVICE_CLASS is not set
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_MMC=y

arch/arm/configs/magician_defconfig

@@ -132,7 +132,7 @@ CONFIG_USB_MON=m
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_VBUS_DRAW=500
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 CONFIG_USB_GADGETFS=m

arch/arm/configs/omap1_defconfig

@@ -48,13 +48,7 @@ CONFIG_MACH_SX1=y
 CONFIG_MACH_NOKIA770=y
 CONFIG_MACH_AMS_DELTA=y
 CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
-CONFIG_OMAP_ARM_216MHZ=y
-CONFIG_OMAP_ARM_195MHZ=y
-CONFIG_OMAP_ARM_192MHZ=y
 CONFIG_OMAP_ARM_182MHZ=y
-CONFIG_OMAP_ARM_168MHZ=y
-# CONFIG_OMAP_ARM_60MHZ is not set
 # CONFIG_ARM_THUMB is not set
 CONFIG_PCCARD=y
 CONFIG_OMAP_CF=y

arch/arm/configs/u300_defconfig

@@ -14,8 +14,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_U300=y
 CONFIG_MACH_U300=y
 CONFIG_MACH_U300_BS335=y
-CONFIG_MACH_U300_DUAL_RAM=y
-CONFIG_U300_DEBUG=y
 CONFIG_MACH_U300_SPIDUMMY=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -26,19 +24,21 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/ram0 rw rootfstype=rootfs console=ttyAMA0,115200n8 lpj=515072"
 CONFIG_CPU_IDLE=y
 CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
 # CONFIG_SUSPEND is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_MISC_DEVICES is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSMC=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
 # CONFIG_HWMON is not set
@@ -51,6 +51,7 @@ CONFIG_BACKLIGHT_CLASS_DEVICE=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
+CONFIG_MMC_CLKGATE=y
 CONFIG_MMC_ARMMMCI=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
@@ -65,10 +66,8 @@ CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRC32 is not set

arch/arm/configs/u8500_defconfig

@@ -10,7 +10,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_U8500=y
 CONFIG_UX500_SOC_DB5500=y
 CONFIG_UX500_SOC_DB8500=y
-CONFIG_MACH_U8500=y
+CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
 CONFIG_NO_HZ=y
@@ -24,6 +24,7 @@ CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_VFP=y
 CONFIG_NEON=y
+CONFIG_PM_RUNTIME=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -41,11 +42,8 @@ CONFIG_MISC_DEVICES=y
 CONFIG_AB8500_PWM=y
 CONFIG_SENSORS_BH1780=y
 CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMSC911X=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+CONFIG_SMSC_PHY=y
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
@@ -72,15 +70,12 @@ CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
-# CONFIG_HWMON is not set
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
+CONFIG_AB5500_CORE=y
 CONFIG_AB8500_CORE=y
 CONFIG_REGULATOR_AB8500=y
 # CONFIG_HID_SUPPORT is not set
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_GADGET_MUSB_HDRC=y
-CONFIG_MUSB_PIO_ONLY=y
 CONFIG_USB_GADGET=y
 CONFIG_AB8500_USB=y
 CONFIG_MMC=y
@@ -97,6 +92,7 @@ CONFIG_DMADEVICES=y
 CONFIG_STE_DMA40=y
 CONFIG_STAGING=y
 CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y
+CONFIG_HSEM_U8500=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y

arch/arm/configs/zeus_defconfig

@@ -140,7 +140,7 @@ CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_MCT_U232=m
 CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
 CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m

arch/arm/include/asm/hardware/cache-l2x0.h

@@ -20,6 +20,8 @@
 #ifndef __ASM_ARM_HARDWARE_L2X0_H
 #define __ASM_ARM_HARDWARE_L2X0_H
 
+#include <linux/errno.h>
+
 #define L2X0_CACHE_ID			0x000
 #define L2X0_CACHE_TYPE			0x004
 #define L2X0_CTRL			0x100

arch/arm/include/asm/mach/arch.h

@@ -13,6 +13,7 @@
 struct tag;
 struct meminfo;
 struct sys_timer;
+struct pt_regs;
 
 struct machine_desc {
 	unsigned int		nr;		/* architecture number	*/

arch/arm/include/asm/pmu.h

@@ -55,16 +55,6 @@ reserve_pmu(enum arm_pmu_type type);
 extern void
 release_pmu(enum arm_pmu_type type);
 
-/**
- * init_pmu() - Initialise the PMU.
- *
- * Initialise the system ready for PMU enabling. This should typically set the
- * IRQ affinity and nothing else. The users (oprofile/perf events etc) will do
- * the actual hardware initialisation.
- */
-extern int
-init_pmu(enum arm_pmu_type type);
-
 #else /* CONFIG_CPU_HAS_PMU */
 
 #include <linux/err.h>

arch/arm/include/asm/topology.h

@@ -25,7 +25,7 @@ extern struct cputopo_arm cpu_topology[NR_CPUS];
 
 void init_cpu_topology(void);
 void store_cpu_topology(unsigned int cpuid);
-const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
+const struct cpumask *cpu_coregroup_mask(int cpu);
 
 #else
 

arch/arm/include/asm/unistd.h

@@ -402,6 +402,8 @@
 #define __NR_syncfs			(__NR_SYSCALL_BASE+373)
 #define __NR_sendmmsg			(__NR_SYSCALL_BASE+374)
 #define __NR_setns			(__NR_SYSCALL_BASE+375)
+#define __NR_process_vm_readv		(__NR_SYSCALL_BASE+376)
+#define __NR_process_vm_writev		(__NR_SYSCALL_BASE+377)
 
 /*
  * The following SWIs are ARM private.

arch/arm/include/asm/unwind.h

@@ -30,14 +30,15 @@ enum unwind_reason_code {
 };
 
 struct unwind_idx {
-	unsigned long addr;
+	unsigned long addr_offset;
 	unsigned long insn;
 };
 
 struct unwind_table {
 	struct list_head list;
-	struct unwind_idx *start;
-	struct unwind_idx *stop;
+	const struct unwind_idx *start;
+	const struct unwind_idx *origin;
+	const struct unwind_idx *stop;
 	unsigned long begin_addr;
 	unsigned long end_addr;
 };
@@ -49,15 +50,6 @@ extern struct unwind_table *unwind_table_add(unsigned long start,
 extern void unwind_table_del(struct unwind_table *tab);
 extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
 
-#ifdef CONFIG_ARM_UNWIND
-extern int __init unwind_init(void);
-#else
-static inline int __init unwind_init(void)
-{
-	return 0;
-}
-#endif
-
 #endif	/* !__ASSEMBLY__ */
 
 #ifdef CONFIG_ARM_UNWIND

arch/arm/kernel/calls.S

@@ -385,6 +385,8 @@
 		CALL(sys_syncfs)
 		CALL(sys_sendmmsg)
 /* 375 */	CALL(sys_setns)
+		CALL(sys_process_vm_readv)
+		CALL(sys_process_vm_writev)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

arch/arm/kernel/entry-armv.S

@@ -497,7 +497,7 @@ ENDPROC(__und_usr)
 	.popsection
 	.pushsection __ex_table,"a"
 	.long	1b, 4b
-#if __LINUX_ARM_ARCH__ >= 7
+#if CONFIG_ARM_THUMB && __LINUX_ARM_ARCH__ >= 6 && CONFIG_CPU_V7
 	.long	2b, 4b
 	.long	3b, 4b
 #endif

arch/arm/kernel/head.S

@@ -360,7 +360,7 @@ __secondary_data:
  *  r13 = *virtual* address to jump to upon completion
  */
 __enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
+#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
 	orr	r0, r0, #CR_A
 #else
 	bic	r0, r0, #CR_A

arch/arm/kernel/kprobes-arm.c

@@ -519,10 +519,12 @@ static const union decode_item arm_cccc_0000_____1001_table[] = {
 static const union decode_item arm_cccc_0001_____1001_table[] = {
 	/* Synchronization primitives					*/
 
+#if __LINUX_ARM_ARCH__ < 6
+	/* Deprecated on ARMv6 and may be UNDEFINED on v7		*/
 	/* SMP/SWPB		cccc 0001 0x00 xxxx xxxx xxxx 1001 xxxx */
 	DECODE_EMULATEX	(0x0fb000f0, 0x01000090, emulate_rd12rn16rm0_rwflags_nopc,
 						 REGS(NOPC, NOPC, 0, 0, NOPC)),
-
+#endif
 	/* LDREX/STREX{,D,B,H}	cccc 0001 1xxx xxxx xxxx xxxx 1001 xxxx */
 	/* And unallocated instructions...				*/
 	DECODE_END

arch/arm/kernel/kprobes-test-arm.c

@@ -427,18 +427,25 @@ void kprobe_arm_test_cases(void)
 
 	TEST_GROUP("Synchronization primitives")
 
-	/*
-	 * Use hard coded constants for SWP instructions to avoid warnings
-	 * about deprecated instructions.
-	 */
-	TEST_RP( ".word 0xe108e097 @ swp	lr, r",7,VAL2,", [r",8,0,"]")
-	TEST_R(  ".word 0x610d0091 @ swpvs	r0, r",1,VAL1,", [sp]")
-	TEST_RP( ".word 0xe10cd09e @ swp	sp, r",14,VAL2,", [r",12,13*4,"]")
+#if __LINUX_ARM_ARCH__ < 6
+	TEST_RP("swp	lr, r",7,VAL2,", [r",8,0,"]")
+	TEST_R( "swpvs	r0, r",1,VAL1,", [sp]")
+	TEST_RP("swp	sp, r",14,VAL2,", [r",12,13*4,"]")
+#else
+	TEST_UNSUPPORTED(".word 0xe108e097 @ swp	lr, r7, [r8]")
+	TEST_UNSUPPORTED(".word 0x610d0091 @ swpvs	r0, r1, [sp]")
+	TEST_UNSUPPORTED(".word 0xe10cd09e @ swp	sp, r14 [r12]")
+#endif
 	TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]")
 	TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]")
 	TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]")
-	TEST_RP( ".word 0xe148e097 @ swpb	lr, r",7,VAL2,", [r",8,0,"]")
-	TEST_R(  ".word 0x614d0091 @ swpvsb	r0, r",1,VAL1,", [sp]")
+#if __LINUX_ARM_ARCH__ < 6
+	TEST_RP("swpb	lr, r",7,VAL2,", [r",8,0,"]")
+	TEST_R( "swpvsb	r0, r",1,VAL1,", [sp]")
+#else
+	TEST_UNSUPPORTED(".word 0xe148e097 @ swpb	lr, r7, [r8]")
+	TEST_UNSUPPORTED(".word 0x614d0091 @ swpvsb	r0, r1, [sp]")
+#endif
 	TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]")
 
 	TEST_UNSUPPORTED(".word	0xe1100090") /* Unallocated space */
@@ -550,7 +557,7 @@ void kprobe_arm_test_cases(void)
 	TEST_RPR(  "strccd	r",8, VAL2,", [r",13,0, ", r",12,48,"]")
 	TEST_RPR(  "strd	r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
 	TEST_RPR(  "strcsd	r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
-	TEST_RPR(  "strd	r",2, VAL1,", [r",3, 24,"], r",4,48,"")
+	TEST_RPR(  "strd	r",2, VAL1,", [r",5, 24,"], r",4,48,"")
 	TEST_RPR(  "strd	r",10,VAL2,", [r",9, 48,"], -r",7,24,"")
 	TEST_UNSUPPORTED(".word 0xe1afc0fa	@ strd r12, [pc, r10]!")
 

arch/arm/kernel/kprobes-test-thumb.c

@@ -222,8 +222,8 @@ void kprobe_thumb16_test_cases(void)
 DONT_TEST_IN_ITBLOCK(
 	TEST_BF_R(  "cbnz	r",0,0, ", 2f")
 	TEST_BF_R(  "cbz	r",2,-1,", 2f")
-	TEST_BF_RX( "cbnz	r",4,1, ", 2f",0x20)
-	TEST_BF_RX( "cbz	r",7,0, ", 2f",0x40)
+	TEST_BF_RX( "cbnz	r",4,1, ", 2f", SPACE_0x20)
+	TEST_BF_RX( "cbz	r",7,0, ", 2f", SPACE_0x40)
 )
 	TEST_R("sxth	r0, r",7, HH1,"")
 	TEST_R("sxth	r7, r",0, HH2,"")
@@ -246,7 +246,7 @@ DONT_TEST_IN_ITBLOCK(
 	TESTCASE_START(code)		\
 	TEST_ARG_PTR(13, offset)	\
 	TEST_ARG_END("")		\
-	TEST_BRANCH_F(code,0)		\
+	TEST_BRANCH_F(code)		\
 	TESTCASE_END
 
 	TEST("push	{r0}")
@@ -319,8 +319,8 @@ CONDITION_INSTRUCTIONS(8,
 
 	TEST_BF(  "b	2f")
 	TEST_BB(  "b	2b")
-	TEST_BF_X("b	2f", 0x400)
-	TEST_BB_X("b	2b", 0x400)
+	TEST_BF_X("b	2f", SPACE_0x400)
+	TEST_BB_X("b	2b", SPACE_0x400)
 
 	TEST_GROUP("Testing instructions in IT blocks")
 
@@ -746,7 +746,7 @@ CONDITION_INSTRUCTIONS(22,
 	TEST_BB("bne.w	2b")
 	TEST_BF("bgt.w	2f")
 	TEST_BB("blt.w	2b")
-	TEST_BF_X("bpl.w	2f",0x1000)
+	TEST_BF_X("bpl.w	2f", SPACE_0x1000)
 )
 
 	TEST_UNSUPPORTED("msr	cpsr, r0")
@@ -786,11 +786,11 @@ CONDITION_INSTRUCTIONS(22,
 
 	TEST_BF(  "b.w	2f")
 	TEST_BB(  "b.w	2b")
-	TEST_BF_X("b.w	2f", 0x1000)
+	TEST_BF_X("b.w	2f", SPACE_0x1000)
 
 	TEST_BF(  "bl.w	2f")
 	TEST_BB(  "bl.w	2b")
-	TEST_BB_X("bl.w	2b", 0x1000)
+	TEST_BB_X("bl.w	2b", SPACE_0x1000)
 
 	TEST_X(	"blx	__dummy_arm_subroutine",
 		".arm				\n\t"

arch/arm/kernel/kprobes-test.h

@@ -149,23 +149,31 @@ struct test_arg_end {
 	"1:	"instruction"				\n\t"	\
 	"	nop					\n\t"
 
-#define TEST_BRANCH_F(instruction, xtra_dist)			\
+#define TEST_BRANCH_F(instruction)				\
 	TEST_INSTRUCTION(instruction)				\
-	".if "#xtra_dist"				\n\t"	\
 	"	b	99f				\n\t"	\
-	".space "#xtra_dist"				\n\t"	\
-	".endif						\n\t"	\
+	"2:	nop					\n\t"
+
+#define TEST_BRANCH_B(instruction)				\
+	"	b	50f				\n\t"	\
+	"	b	99f				\n\t"	\
+	"2:	nop					\n\t"	\
+	"	b	99f				\n\t"	\
+	TEST_INSTRUCTION(instruction)
+
+#define TEST_BRANCH_FX(instruction, codex)			\
+	TEST_INSTRUCTION(instruction)				\
+	"	b	99f				\n\t"	\
+	codex"						\n\t"	\
 	"	b	99f				\n\t"	\
 	"2:	nop					\n\t"
 
-#define TEST_BRANCH_B(instruction, xtra_dist)			\
+#define TEST_BRANCH_BX(instruction, codex)			\
 	"	b	50f				\n\t"	\
 	"	b	99f				\n\t"	\
 	"2:	nop					\n\t"	\
 	"	b	99f				\n\t"	\
-	".if "#xtra_dist"				\n\t"	\
-	".space "#xtra_dist"				\n\t"	\
-	".endif						\n\t"	\
+	codex"						\n\t"	\
 	TEST_INSTRUCTION(instruction)
 
 #define TESTCASE_END						\
@@ -301,47 +309,60 @@ struct test_arg_end {
 	TESTCASE_START(code1 #reg1 code2)	\
 	TEST_ARG_PTR(reg1, val1)		\
 	TEST_ARG_END("")			\
-	TEST_BRANCH_F(code1 #reg1 code2, 0)	\
+	TEST_BRANCH_F(code1 #reg1 code2)	\
 	TESTCASE_END
 
-#define TEST_BF_X(code, xtra_dist)		\
+#define TEST_BF(code)				\
 	TESTCASE_START(code)			\
 	TEST_ARG_END("")			\
-	TEST_BRANCH_F(code, xtra_dist)		\
+	TEST_BRANCH_F(code)			\
 	TESTCASE_END
 
-#define TEST_BB_X(code, xtra_dist)		\
+#define TEST_BB(code)				\
 	TESTCASE_START(code)			\
 	TEST_ARG_END("")			\
-	TEST_BRANCH_B(code, xtra_dist)		\
+	TEST_BRANCH_B(code)			\
 	TESTCASE_END
 
-#define TEST_BF_RX(code1, reg, val, code2, xtra_dist)	\
-	TESTCASE_START(code1 #reg code2)		\
-	TEST_ARG_REG(reg, val)				\
-	TEST_ARG_END("")				\
-	TEST_BRANCH_F(code1 #reg code2, xtra_dist)	\
+#define TEST_BF_R(code1, reg, val, code2)	\
+	TESTCASE_START(code1 #reg code2)	\
+	TEST_ARG_REG(reg, val)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_F(code1 #reg code2)		\
 	TESTCASE_END
 
-#define TEST_BB_RX(code1, reg, val, code2, xtra_dist)	\
-	TESTCASE_START(code1 #reg code2)		\
-	TEST_ARG_REG(reg, val)				\
-	TEST_ARG_END("")				\
-	TEST_BRANCH_B(code1 #reg code2, xtra_dist)	\
+#define TEST_BB_R(code1, reg, val, code2)	\
+	TESTCASE_START(code1 #reg code2)	\
+	TEST_ARG_REG(reg, val)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_B(code1 #reg code2)		\
 	TESTCASE_END
 
-#define TEST_BF(code)	TEST_BF_X(code, 0)
-#define TEST_BB(code)	TEST_BB_X(code, 0)
-
-#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0)
-#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0)
-
 #define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3)	\
 	TESTCASE_START(code1 #reg1 code2 #reg2 code3)		\
 	TEST_ARG_REG(reg1, val1)				\
 	TEST_ARG_REG(reg2, val2)				\
 	TEST_ARG_END("")					\
-	TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0)		\
+	TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3)		\
+	TESTCASE_END
+
+#define TEST_BF_X(code, codex)			\
+	TESTCASE_START(code)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_FX(code, codex)		\
+	TESTCASE_END
+
+#define TEST_BB_X(code, codex)			\
+	TESTCASE_START(code)			\
+	TEST_ARG_END("")			\
+	TEST_BRANCH_BX(code, codex)		\
+	TESTCASE_END
+
+#define TEST_BF_RX(code1, reg, val, code2, codex)	\
+	TESTCASE_START(code1 #reg code2)		\
+	TEST_ARG_REG(reg, val)				\
+	TEST_ARG_END("")				\
+	TEST_BRANCH_FX(code1 #reg code2, codex)		\
 	TESTCASE_END
 
 #define TEST_X(code, codex)			\
@@ -372,6 +393,25 @@ struct test_arg_end {
 	TESTCASE_END
 
 
+/*
+ * Macros for defining space directives spread over multiple lines.
+ * These are required so the compiler guesses better the length of inline asm
+ * code and will spill the literal pool early enough to avoid generating PC
+ * relative loads with out of range offsets.
+ */
+#define TWICE(x)	x x
+#define SPACE_0x8	TWICE(".space 4\n\t")
+#define SPACE_0x10	TWICE(SPACE_0x8)
+#define SPACE_0x20	TWICE(SPACE_0x10)
+#define SPACE_0x40	TWICE(SPACE_0x20)
+#define SPACE_0x80	TWICE(SPACE_0x40)
+#define SPACE_0x100	TWICE(SPACE_0x80)
+#define SPACE_0x200	TWICE(SPACE_0x100)
+#define SPACE_0x400	TWICE(SPACE_0x200)
+#define SPACE_0x800	TWICE(SPACE_0x400)
+#define SPACE_0x1000	TWICE(SPACE_0x800)
+
+
 /* Various values used in test cases... */
 #define N(val)	(val ^ 0xffffffff)
 #define VAL1	0x12345678

arch/arm/kernel/machine_kexec.c

@@ -32,24 +32,6 @@ static atomic_t waiting_for_crash_ipi;
 
 int machine_kexec_prepare(struct kimage *image)
 {
-	unsigned long page_list;
-	void *reboot_code_buffer;
-	page_list = image->head & PAGE_MASK;
-
-	reboot_code_buffer = page_address(image->control_code_page);
-
-	/* Prepare parameters for reboot_code_buffer*/
-	kexec_start_address = image->start;
-	kexec_indirection_page = page_list;
-	kexec_mach_type = machine_arch_type;
-	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
-
-	/* copy our kernel relocation code to the control code page */
-	memcpy(reboot_code_buffer,
-	       relocate_new_kernel, relocate_new_kernel_size);
-
-	flush_icache_range((unsigned long) reboot_code_buffer,
-			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	return 0;
 }
 
@@ -100,14 +82,31 @@ void (*kexec_reinit)(void);
 
 void machine_kexec(struct kimage *image)
 {
+	unsigned long page_list;
 	unsigned long reboot_code_buffer_phys;
 	void *reboot_code_buffer;
 
+
+	page_list = image->head & PAGE_MASK;
+
 	/* we need both effective and real address here */
 	reboot_code_buffer_phys =
 	    page_to_pfn(image->control_code_page) << PAGE_SHIFT;
 	reboot_code_buffer = page_address(image->control_code_page);
 
+	/* Prepare parameters for reboot_code_buffer*/
+	kexec_start_address = image->start;
+	kexec_indirection_page = page_list;
+	kexec_mach_type = machine_arch_type;
+	kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET;
+
+	/* copy our kernel relocation code to the control code page */
+	memcpy(reboot_code_buffer,
+	       relocate_new_kernel, relocate_new_kernel_size);
+
+
+	flush_icache_range((unsigned long) reboot_code_buffer,
+			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
 	if (kexec_reinit)

arch/arm/kernel/perf_event.c

@@ -343,19 +343,25 @@ validate_group(struct perf_event *event)
 {
 	struct perf_event *sibling, *leader = event->group_leader;
 	struct pmu_hw_events fake_pmu;
+	DECLARE_BITMAP(fake_used_mask, ARMPMU_MAX_HWEVENTS);
 
-	memset(&fake_pmu, 0, sizeof(fake_pmu));
+	/*
+	 * Initialise the fake PMU. We only need to populate the
+	 * used_mask for the purposes of validation.
+	 */
+	memset(fake_used_mask, 0, sizeof(fake_used_mask));
+	fake_pmu.used_mask = fake_used_mask;
 
 	if (!validate_event(&fake_pmu, leader))
-		return -ENOSPC;
+		return -EINVAL;
 
 	list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
 		if (!validate_event(&fake_pmu, sibling))
-			return -ENOSPC;
+			return -EINVAL;
 	}
 
 	if (!validate_event(&fake_pmu, event))
-		return -ENOSPC;
+		return -EINVAL;
 
 	return 0;
 }
@@ -396,6 +402,9 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu)
 	int i, err, irq, irqs;
 	struct platform_device *pmu_device = armpmu->plat_device;
 
+	if (!pmu_device)
+		return -ENODEV;
+
 	err = reserve_pmu(armpmu->type);
 	if (err) {
 		pr_warning("unable to reserve pmu\n");
@@ -631,6 +640,9 @@ static struct platform_device_id armpmu_plat_device_ids[] = {
 
 static int __devinit armpmu_device_probe(struct platform_device *pdev)
 {
+	if (!cpu_pmu)
+		return -ENODEV;
+
 	cpu_pmu->plat_device = pdev;
 	return 0;
 }

arch/arm/kernel/pmu.c

@@ -33,3 +33,4 @@ release_pmu(enum arm_pmu_type type)
 {
 	clear_bit_unlock(type, pmu_lock);
 }
+EXPORT_SYMBOL_GPL(release_pmu);

arch/arm/kernel/process.c

@@ -192,6 +192,9 @@ void cpu_idle(void)
 #endif
 
 			local_irq_disable();
+#ifdef CONFIG_PL310_ERRATA_769419
+			wmb();
+#endif
 			if (hlt_counter) {
 				local_irq_enable();
 				cpu_relax();

arch/arm/kernel/setup.c

@@ -461,8 +461,10 @@ static void __init setup_processor(void)
 	       cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
 	       proc_arch[cpu_architecture()], cr_alignment);
 
-	sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
-	sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
+	snprintf(init_utsname()->machine, __NEW_UTS_LEN + 1, "%s%c",
+		 list->arch_name, ENDIANNESS);
+	snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
+		 list->elf_name, ENDIANNESS);
 	elf_hwcap = list->elf_hwcap;
 #ifndef CONFIG_ARM_THUMB
 	elf_hwcap &= ~HWCAP_THUMB;
@@ -893,8 +895,6 @@ void __init setup_arch(char **cmdline_p)
 {
 	struct machine_desc *mdesc;
 
-	unwind_init();
-
 	setup_processor();
 	mdesc = setup_machine_fdt(__atags_pointer);
 	if (!mdesc)
@@ -902,6 +902,12 @@ void __init setup_arch(char **cmdline_p)
 	machine_desc = mdesc;
 	machine_name = mdesc->name;
 
+#ifdef CONFIG_ZONE_DMA
+	if (mdesc->dma_zone_size) {
+		extern unsigned long arm_dma_zone_size;
+		arm_dma_zone_size = mdesc->dma_zone_size;
+	}
+#endif
 	if (mdesc->soft_reboot)
 		reboot_setup("s");
 
@@ -932,12 +938,6 @@ void __init setup_arch(char **cmdline_p)
 
 	tcm_init();
 
-#ifdef CONFIG_ZONE_DMA
-	if (mdesc->dma_zone_size) {
-		extern unsigned long arm_dma_zone_size;
-		arm_dma_zone_size = mdesc->dma_zone_size;
-	}
-#endif
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	handle_arch_irq = mdesc->handle_irq;
 #endif

arch/arm/kernel/topology.c

@@ -43,7 +43,7 @@
 
 struct cputopo_arm cpu_topology[NR_CPUS];
 
-const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
+const struct cpumask *cpu_coregroup_mask(int cpu)
 {
 	return &cpu_topology[cpu].core_sibling;
 }

arch/arm/kernel/unwind.c

@@ -67,7 +67,7 @@ EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2);
 
 struct unwind_ctrl_block {
 	unsigned long vrs[16];		/* virtual register set */
-	unsigned long *insn;		/* pointer to the current instructions word */
+	const unsigned long *insn;	/* pointer to the current instructions word */
 	int entries;			/* number of entries left to interpret */
 	int byte;			/* current byte number in the instructions word */
 };
@@ -83,8 +83,9 @@ enum regs {
 	PC = 15
 };
 
-extern struct unwind_idx __start_unwind_idx[];
-extern struct unwind_idx __stop_unwind_idx[];
+extern const struct unwind_idx __start_unwind_idx[];
+static const struct unwind_idx *__origin_unwind_idx;
+extern const struct unwind_idx __stop_unwind_idx[];
 
 static DEFINE_SPINLOCK(unwind_lock);
 static LIST_HEAD(unwind_tables);
@@ -98,45 +99,99 @@ static LIST_HEAD(unwind_tables);
 })
 
 /*
- * Binary search in the unwind index. The entries entries are
+ * Binary search in the unwind index. The entries are
  * guaranteed to be sorted in ascending order by the linker.
+ *
+ * start = first entry
+ * origin = first entry with positive offset (or stop if there is no such entry)
+ * stop - 1 = last entry
  */
-static struct unwind_idx *search_index(unsigned long addr,
-				       struct unwind_idx *first,
-				       struct unwind_idx *last)
+static const struct unwind_idx *search_index(unsigned long addr,
+				       const struct unwind_idx *start,
+				       const struct unwind_idx *origin,
+				       const struct unwind_idx *stop)
 {
-	pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last);
+	unsigned long addr_prel31;
+
+	pr_debug("%s(%08lx, %p, %p, %p)\n",
+			__func__, addr, start, origin, stop);
+
+	/*
+	 * only search in the section with the matching sign. This way the
+	 * prel31 numbers can be compared as unsigned longs.
+	 */
+	if (addr < (unsigned long)start)
+		/* negative offsets: [start; origin) */
+		stop = origin;
+	else
+		/* positive offsets: [origin; stop) */
+		start = origin;
+
+	/* prel31 for address relavive to start */
+	addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff;
 
-	if (addr < first->addr) {
+	while (start < stop - 1) {
+		const struct unwind_idx *mid = start + ((stop - start) >> 1);
+
+		/*
+		 * As addr_prel31 is relative to start an offset is needed to
+		 * make it relative to mid.
+		 */
+		if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) <
+				mid->addr_offset)
+			stop = mid;
+		else {
+			/* keep addr_prel31 relative to start */
+			addr_prel31 -= ((unsigned long)mid -
+					(unsigned long)start);
+			start = mid;
+		}
+	}
+
+	if (likely(start->addr_offset <= addr_prel31))
+		return start;
+	else {
 		pr_warning("unwind: Unknown symbol address %08lx\n", addr);
 		return NULL;
-	} else if (addr >= last->addr)
-		return last;
+	}
+}
 
-	while (first < last - 1) {
-		struct unwind_idx *mid = first + ((last - first + 1) >> 1);
+static const struct unwind_idx *unwind_find_origin(
+		const struct unwind_idx *start, const struct unwind_idx *stop)
+{
+	pr_debug("%s(%p, %p)\n", __func__, start, stop);
+	while (start < stop) {
+		const struct unwind_idx *mid = start + ((stop - start) >> 1);
 
-		if (addr < mid->addr)
-			last = mid;
+		if (mid->addr_offset >= 0x40000000)
+			/* negative offset */
+			start = mid + 1;
 		else
-			first = mid;
+			/* positive offset */
+			stop = mid;
 	}
-
-	return first;
+	pr_debug("%s -> %p\n", __func__, stop);
+	return stop;
 }
 
-static struct unwind_idx *unwind_find_idx(unsigned long addr)
+static const struct unwind_idx *unwind_find_idx(unsigned long addr)
 {
-	struct unwind_idx *idx = NULL;
+	const struct unwind_idx *idx = NULL;
 	unsigned long flags;
 
 	pr_debug("%s(%08lx)\n", __func__, addr);
 
-	if (core_kernel_text(addr))
+	if (core_kernel_text(addr)) {
+		if (unlikely(!__origin_unwind_idx))
+			__origin_unwind_idx =
+				unwind_find_origin(__start_unwind_idx,
+						__stop_unwind_idx);
+
 		/* main unwind table */
 		idx = search_index(addr, __start_unwind_idx,
-				   __stop_unwind_idx - 1);
-	else {
+				   __origin_unwind_idx,
+				   __stop_unwind_idx);
+	} else {
 		/* module unwind tables */
 		struct unwind_table *table;
 
@@ -145,7 +200,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr)
 			if (addr >= table->begin_addr &&
 			    addr < table->end_addr) {
 				idx = search_index(addr, table->start,
-						   table->stop - 1);
+						   table->origin,
+						   table->stop);
 				/* Move-to-front to exploit common traces */
 				list_move(&table->list, &unwind_tables);
 				break;
@@ -274,7 +330,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 int unwind_frame(struct stackframe *frame)
 {
 	unsigned long high, low;
-	struct unwind_idx *idx;
+	const struct unwind_idx *idx;
 	struct unwind_ctrl_block ctrl;
 
 	/* only go to a higher address on the stack */
@@ -399,7 +455,6 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
 				      unsigned long text_size)
 {
 	unsigned long flags;
-	struct unwind_idx *idx;
 	struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
 
 	pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
@@ -408,15 +463,12 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
 	if (!tab)
 		return tab;
 
-	tab->start = (struct unwind_idx *)start;
-	tab->stop = (struct unwind_idx *)(start + size);
+	tab->start = (const struct unwind_idx *)start;
+	tab->stop = (const struct unwind_idx *)(start + size);
+	tab->origin = unwind_find_origin(tab->start, tab->stop);
 	tab->begin_addr = text_addr;
 	tab->end_addr = text_addr + text_size;
 
-	/* Convert the symbol addresses to absolute values */
-	for (idx = tab->start; idx < tab->stop; idx++)
-		idx->addr = prel31_to_addr(&idx->addr);
-
 	spin_lock_irqsave(&unwind_lock, flags);
 	list_add_tail(&tab->list, &unwind_tables);
 	spin_unlock_irqrestore(&unwind_lock, flags);
@@ -437,16 +489,3 @@ void unwind_table_del(struct unwind_table *tab)
 
 	kfree(tab);
 }
-
-int __init unwind_init(void)
-{
-	struct unwind_idx *idx;
-
-	/* Convert the symbol addresses to absolute values */
-	for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++)
-		idx->addr = prel31_to_addr(&idx->addr);
-
-	pr_debug("unwind: ARM stack unwinding initialised\n");
-
-	return 0;
-}

arch/arm/lib/bitops.h

@@ -1,5 +1,9 @@
+#include <asm/unwind.h>
+
 #if __LINUX_ARM_ARCH__ >= 6
-	.macro	bitop, instr
+	.macro	bitop, name, instr
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	mov	r2, #1
@@ -13,9 +17,13 @@
 	cmp	r0, #0
 	bne	1b
 	bx	lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 
-	.macro	testop, instr, store
+	.macro	testop, name, instr, store
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	mov	r2, #1
@@ -34,9 +42,13 @@
 	cmp	r0, #0
 	movne	r0, #1
 2:	bx	lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 #else
-	.macro	bitop, instr
+	.macro	bitop, name, instr
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	and	r2, r0, #31
@@ -49,6 +61,8 @@
 	str	r2, [r1, r0, lsl #2]
 	restore_irqs ip
 	mov	pc, lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 
 /**
@@ -59,7 +73,9 @@
  * Note: we can trivially conditionalise the store instruction
  * to avoid dirtying the data cache.
  */
-	.macro	testop, instr, store
+	.macro	testop, name, instr, store
+ENTRY(	\name		)
+UNWIND(	.fnstart	)
 	ands	ip, r1, #3
 	strneb	r1, [ip]		@ assert word-aligned
 	and	r3, r0, #31
@@ -73,5 +89,7 @@
 	moveq	r0, #0
 	restore_irqs ip
 	mov	pc, lr
+UNWIND(	.fnend		)
+ENDPROC(\name		)
 	.endm
 #endif

arch/arm/lib/changebit.S

@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_change_bit)
-	bitop	eor
-ENDPROC(_change_bit)
+bitop	_change_bit, eor

arch/arm/lib/clearbit.S

@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_clear_bit)
-	bitop	bic
-ENDPROC(_clear_bit)
+bitop	_clear_bit, bic

arch/arm/lib/setbit.S

@@ -12,6 +12,4 @@
 #include "bitops.h"
 		.text
 
-ENTRY(_set_bit)
-	bitop	orr
-ENDPROC(_set_bit)
+bitop	_set_bit, orr

arch/arm/lib/testchangebit.S

@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_change_bit)
-	testop	eor, str
-ENDPROC(_test_and_change_bit)
+testop	_test_and_change_bit, eor, str

arch/arm/lib/testclearbit.S

@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_clear_bit)
-	testop	bicne, strne
-ENDPROC(_test_and_clear_bit)
+testop	_test_and_clear_bit, bicne, strne

arch/arm/lib/testsetbit.S

@@ -12,6 +12,4 @@
 #include "bitops.h"
                 .text
 
-ENTRY(_test_and_set_bit)
-	testop	orreq, streq
-ENDPROC(_test_and_set_bit)
+testop	_test_and_set_bit, orreq, streq

arch/arm/mach-at91/at91rm9200_devices.c

@@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {

arch/arm/mach-at91/at91sam9260.c

@@ -195,9 +195,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
-	CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
-	CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
-	CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
 	/* more usart lookup table for DT entries */
 	CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),

arch/arm/mach-at91/at91sam9260_devices.c

@@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {

arch/arm/mach-at91/at91sam9261_devices.c

@@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {

arch/arm/mach-at91/at91sam9263_devices.c

@@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
  *  USB Device (Gadget)
  * -------------------------------------------------------------------- */
 
-#ifdef CONFIG_USB_GADGET_AT91
+#ifdef CONFIG_USB_AT91
 static struct at91_udc_data udc_data;
 
 static struct resource udc_resources[] = {

arch/arm/mach-at91/include/mach/system_rev.h

@@ -19,7 +19,7 @@
 #define BOARD_HAVE_NAND_16BIT	(1 << 31)
 static inline int board_have_nand_16bit(void)
 {
-	return system_rev & BOARD_HAVE_NAND_16BIT;
+	return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0;
 }
 
 #endif /* __ARCH_SYSTEM_REV_H__ */

arch/arm/mach-bcmring/core.c

@@ -235,7 +235,7 @@ void __init bcmring_init_timer(void)
 	 */
 	bcmring_clocksource_init();
 
-	sp804_clockevents_register(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
+	sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0");
 }
 
 struct sys_timer bcmring_timer = {

arch/arm/mach-bcmring/dma.c

@@ -36,6 +36,7 @@
 #include <linux/mm.h>
 #include <linux/pfn.h>
 #include <linux/atomic.h>
+#include <linux/sched.h>
 #include <mach/dma.h>
 
 /* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */

arch/arm/mach-davinci/board-da850-evm.c

@@ -753,7 +753,7 @@ static struct snd_platform_data da850_evm_snd_data = {
 	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
 	.tdm_slots	= 2,
 	.serial_dir	= da850_iis_serializer_direction,
-	.asp_chan_q	= EVENTQ_1,
+	.asp_chan_q	= EVENTQ_0,
 	.version	= MCASP_VERSION_2,
 	.txnumevt	= 1,
 	.rxnumevt	= 1,

arch/arm/mach-davinci/board-dm365-evm.c

@@ -107,7 +107,7 @@ static struct mtd_partition davinci_nand_partitions[] = {
 		/* UBL (a few copies) plus U-Boot */
 		.name		= "bootloader",
 		.offset		= 0,
-		.size		= 28 * NAND_BLOCK_SIZE,
+		.size		= 30 * NAND_BLOCK_SIZE,
 		.mask_flags	= MTD_WRITEABLE, /* force read-only */
 	}, {
 		/* U-Boot environment */

arch/arm/mach-davinci/dm646x.c

@@ -161,7 +161,6 @@ static struct clk dsp_clk = {
 	.name = "dsp",
 	.parent = &pll1_sysclk1,
 	.lpsc = DM646X_LPSC_C64X_CPU,
-	.flags = PSC_DSP,
 	.usecount = 1,			/* REVISIT how to disable? */
 };
 

arch/arm/mach-davinci/include/mach/psc.h

@@ -233,7 +233,7 @@
 #define PTCMD		0x120
 #define PTSTAT		0x128
 #define PDSTAT		0x200
-#define PDCTL1		0x304
+#define PDCTL		0x300
 #define MDSTAT		0x800
 #define MDCTL		0xA00
 
@@ -244,7 +244,10 @@
 #define PSC_STATE_ENABLE	3
 
 #define MDSTAT_STATE_MASK	0x3f
+#define PDSTAT_STATE_MASK	0x1f
 #define MDCTL_FORCE		BIT(31)
+#define PDCTL_NEXT		BIT(1)
+#define PDCTL_EPCGOOD		BIT(8)
 
 #ifndef __ASSEMBLER__
 

arch/arm/mach-davinci/psc.c

@@ -52,7 +52,7 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
 void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 		unsigned int id, bool enable, u32 flags)
 {
-	u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
+	u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl;
 	void __iomem *psc_base;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 	u32 next_state = PSC_STATE_ENABLE;
@@ -79,11 +79,11 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 		mdctl |= MDCTL_FORCE;
 	__raw_writel(mdctl, psc_base + MDCTL + 4 * id);
 
-	pdstat = __raw_readl(psc_base + PDSTAT);
-	if ((pdstat & 0x00000001) == 0) {
-		pdctl1 = __raw_readl(psc_base + PDCTL1);
-		pdctl1 |= 0x1;
-		__raw_writel(pdctl1, psc_base + PDCTL1);
+	pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain);
+	if ((pdstat & PDSTAT_STATE_MASK) == 0) {
+		pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
+		pdctl |= PDCTL_NEXT;
+		__raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
 
 		ptcmd = 1 << domain;
 		__raw_writel(ptcmd, psc_base + PTCMD);
@@ -92,9 +92,9 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr,
 			epcpr = __raw_readl(psc_base + EPCPR);
 		} while ((((epcpr >> domain) & 1) == 0));
 
-		pdctl1 = __raw_readl(psc_base + PDCTL1);
-		pdctl1 |= 0x100;
-		__raw_writel(pdctl1, psc_base + PDCTL1);
+		pdctl = __raw_readl(psc_base + PDCTL + 4 * domain);
+		pdctl |= PDCTL_EPCGOOD;
+		__raw_writel(pdctl, psc_base + PDCTL + 4 * domain);
 	} else {
 		ptcmd = 1 << domain;
 		__raw_writel(ptcmd, psc_base + PTCMD);

arch/arm/mach-exynos/cpuidle.c

@@ -12,6 +12,8 @@
 #include <linux/init.h>
 #include <linux/cpuidle.h>
 #include <linux/io.h>
+#include <linux/export.h>
+#include <linux/time.h>
 
 #include <asm/proc-fns.h>
 

arch/arm/mach-exynos/mct.c

@@ -44,8 +44,6 @@ struct mct_clock_event_device {
 	char name[10];
 };
 
-static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
-
 static void exynos4_mct_write(unsigned int value, void *addr)
 {
 	void __iomem *stat_addr;
@@ -264,6 +262,9 @@ static void exynos4_clockevent_init(void)
 }
 
 #ifdef CONFIG_LOCAL_TIMERS
+
+static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
+
 /* Clock event handling */
 static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
 {
@@ -428,9 +429,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
 
 void local_timer_stop(struct clock_event_device *evt)
 {
+	unsigned int cpu = smp_processor_id();
 	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
 	if (mct_int_type == MCT_INT_SPI)
-		disable_irq(evt->irq);
+		if (cpu == 0)
+			remove_irq(evt->irq, &mct_tick0_event_irq);
+		else
+			remove_irq(evt->irq, &mct_tick1_event_irq);
 	else
 		disable_percpu_irq(IRQ_MCT_LOCALTIMER);
 }
@@ -443,6 +448,7 @@ static void __init exynos4_timer_resources(void)
 
 	clk_rate = clk_get_rate(mct_clk);
 
+#ifdef CONFIG_LOCAL_TIMERS
 	if (mct_int_type == MCT_INT_PPI) {
 		int err;
 
@@ -452,6 +458,7 @@ static void __init exynos4_timer_resources(void)
 		WARN(err, "MCT: can't request IRQ %d (%d)\n",
 		     IRQ_MCT_LOCALTIMER, err);
 	}
+#endif /* CONFIG_LOCAL_TIMERS */
 }
 
 static void __init exynos4_timer_init(void)

arch/arm/mach-highbank/highbank.c

@@ -22,6 +22,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of_address.h>
+#include <linux/smp.h>
 
 #include <asm/cacheflush.h>
 #include <asm/unified.h>
@@ -72,6 +73,9 @@ static void __init highbank_map_io(void)
 
 void highbank_set_cpu_jump(int cpu, void *jump_addr)
 {
+#ifdef CONFIG_SMP
+	cpu = cpu_logical_map(cpu);
+#endif
 	writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
 	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
 	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),

arch/arm/mach-imx/Kconfig

@@ -10,11 +10,6 @@ config HAVE_IMX_MMDC
 config HAVE_IMX_SRC
 	bool
 
-#
-# ARCH_MX31 and ARCH_MX35 are left for compatibility
-# Some usages assume that having one of them implies not having (e.g.) ARCH_MX2.
-# To easily distinguish good and reviewed from unreviewed usages new (and IMHO
-# more sensible) names are used: SOC_IMX31 and SOC_IMX35
 config ARCH_MX1
 	bool
 
@@ -27,12 +22,6 @@ config ARCH_MX25
 config MACH_MX27
 	bool
 
-config ARCH_MX31
-	bool
-
-config ARCH_MX35
-	bool
-
 config SOC_IMX1
 	bool
 	select ARCH_MX1
@@ -72,7 +61,6 @@ config SOC_IMX31
 	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select ARCH_MXC_AUDMUX_V2
-	select ARCH_MX31
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 
@@ -82,7 +70,6 @@ config SOC_IMX35
 	select ARCH_MXC_IOMUX_V3
 	select ARCH_MXC_AUDMUX_V2
 	select HAVE_EPIT
-	select ARCH_MX35
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 

arch/arm/mach-imx/clock-imx6q.c

@@ -1953,14 +1953,17 @@ static struct map_desc imx6q_clock_desc[] = {
 	imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
 };
 
+void __init imx6q_clock_map_io(void)
+{
+	iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
+}
+
 int __init mx6q_clocks_init(void)
 {
 	struct device_node *np;
 	void __iomem *base;
 	int i, irq;
 
-	iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
-
 	/* retrieve the freqency of fixed clocks from device tree */
 	for_each_compatible_node(np, NULL, "fixed-clock") {
 		u32 rate;

arch/arm/mach-imx/mach-imx6q.c

@@ -34,16 +34,18 @@ static void __init imx6q_map_io(void)
 {
 	imx_lluart_map_io();
 	imx_scu_map_io();
+	imx6q_clock_map_io();
 }
 
-static void __init imx6q_gpio_add_irq_domain(struct device_node *np,
+static int __init imx6q_gpio_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
-				   32 * 7; /* imx6q gets 7 gpio ports */
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
+	gpio_irq_base -= 32;
 	irq_domain_add_simple(np, gpio_irq_base);
-	gpio_irq_base += 32;
+
+	return 0;
 }
 
 static const struct of_device_id imx6q_irq_match[] __initconst = {

arch/arm/mach-imx/mm-imx3.c

@@ -33,29 +33,32 @@
 static void imx3_idle(void)
 {
 	unsigned long reg = 0;
-	__asm__ __volatile__(
-		/* disable I and D cache */
-		"mrc p15, 0, %0, c1, c0, 0\n"
-		"bic %0, %0, #0x00001000\n"
-		"bic %0, %0, #0x00000004\n"
-		"mcr p15, 0, %0, c1, c0, 0\n"
-		/* invalidate I cache */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c5, 0\n"
-		/* clear and invalidate D cache */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c14, 0\n"
-		/* WFI */
-		"mov %0, #0\n"
-		"mcr p15, 0, %0, c7, c0, 4\n"
-		"nop\n" "nop\n" "nop\n" "nop\n"
-		"nop\n" "nop\n" "nop\n"
-		/* enable I and D cache */
-		"mrc p15, 0, %0, c1, c0, 0\n"
-		"orr %0, %0, #0x00001000\n"
-		"orr %0, %0, #0x00000004\n"
-		"mcr p15, 0, %0, c1, c0, 0\n"
-		: "=r" (reg));
+
+	if (!need_resched())
+		__asm__ __volatile__(
+			/* disable I and D cache */
+			"mrc p15, 0, %0, c1, c0, 0\n"
+			"bic %0, %0, #0x00001000\n"
+			"bic %0, %0, #0x00000004\n"
+			"mcr p15, 0, %0, c1, c0, 0\n"
+			/* invalidate I cache */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c5, 0\n"
+			/* clear and invalidate D cache */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c14, 0\n"
+			/* WFI */
+			"mov %0, #0\n"
+			"mcr p15, 0, %0, c7, c0, 4\n"
+			"nop\n" "nop\n" "nop\n" "nop\n"
+			"nop\n" "nop\n" "nop\n"
+			/* enable I and D cache */
+			"mrc p15, 0, %0, c1, c0, 0\n"
+			"orr %0, %0, #0x00001000\n"
+			"orr %0, %0, #0x00000004\n"
+			"mcr p15, 0, %0, c1, c0, 0\n"
+			: "=r" (reg));
+	local_irq_enable();
 }
 
 static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
@@ -108,6 +111,7 @@ void imx3_init_l2x0(void)
 	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
 }
 
+#ifdef CONFIG_SOC_IMX31
 static struct map_desc mx31_io_desc[] __initdata = {
 	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
 	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
@@ -126,33 +130,11 @@ void __init mx31_map_io(void)
 	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
 }
 
-static struct map_desc mx35_io_desc[] __initdata = {
-	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-void __init mx35_map_io(void)
-{
-	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
-}
-
 void __init imx31_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX31);
 	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-	imx_idle = imx3_idle;
-	imx_ioremap = imx3_ioremap;
-}
-
-void __init imx35_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX35);
-	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-	imx_idle = imx3_idle;
+	pm_idle = imx3_idle;
 	imx_ioremap = imx3_ioremap;
 }
 
@@ -161,11 +143,6 @@ void __init mx31_init_irq(void)
 	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
 }
 
-void __init mx35_init_irq(void)
-{
-	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-}
-
 static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
 	.per_2_per_addr = 1677,
 };
@@ -199,6 +176,35 @@ void __init imx31_soc_init(void)
 
 	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
 }
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+static struct map_desc mx35_io_desc[] __initdata = {
+	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+void __init mx35_map_io(void)
+{
+	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx35_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+	pm_idle = imx3_idle;
+	imx_ioremap = imx3_ioremap;
+}
+
+void __init mx35_init_irq(void)
+{
+	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+}
 
 static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
 	.ap_2_ap_addr = 642,
@@ -254,3 +260,4 @@ void __init imx35_soc_init(void)
 
 	imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
 }
+#endif /* ifdef CONFIG_SOC_IMX35 */

arch/arm/mach-imx/src.c

@@ -14,6 +14,7 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/smp.h>
 #include <asm/unified.h>
 
 #define SRC_SCR				0x000
@@ -23,10 +24,15 @@
 
 static void __iomem *src_base;
 
+#ifndef CONFIG_SMP
+#define cpu_logical_map(cpu)		0
+#endif
+
 void imx_enable_cpu(int cpu, bool enable)
 {
 	u32 mask, val;
 
+	cpu = cpu_logical_map(cpu);
 	mask = 1 << (BP_SRC_SCR_CORE1_ENABLE + cpu - 1);
 	val = readl_relaxed(src_base + SRC_SCR);
 	val = enable ? val | mask : val & ~mask;
@@ -35,6 +41,7 @@ void imx_enable_cpu(int cpu, bool enable)
 
 void imx_set_cpu_jump(int cpu, void *jump_addr)
 {
+	cpu = cpu_logical_map(cpu);
 	writel_relaxed(BSYM(virt_to_phys(jump_addr)),
 		       src_base + SRC_GPR1 + cpu * 8);
 }

arch/arm/mach-mmp/gplugd.c

@@ -182,7 +182,7 @@ static void __init gplugd_init(void)
 
 	/* on-chip devices */
 	pxa168_add_uart(3);
-	pxa168_add_ssp(0);
+	pxa168_add_ssp(1);
 	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
 
 	pxa168_add_eth(&gplugd_eth_platform_data);

arch/arm/mach-mmp/include/mach/gpio-pxa.h

@@ -7,7 +7,7 @@
 #define GPIO_REGS_VIRT	(APB_VIRT_BASE + 0x19000)
 
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x)	(GPIO_REGS_VIRT + (x))
+#define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
 
 #define NR_BUILTIN_GPIO		IRQ_GPIO_NUM
 

arch/arm/mach-msm/devices-iommu.c

@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
+#include <linux/module.h>
 #include <mach/irqs.h>
 #include <mach/iommu.h>
 

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -362,7 +362,7 @@ static void __init mx51_babbage_init(void)
 {
 	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
 	iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
-		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH);
 
 	imx51_soc_init();
 

arch/arm/mach-mx5/board-mx53_evk.c

@@ -106,7 +106,7 @@ static inline void mx53_evk_fec_reset(void)
 	gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
 }
 
-static struct fec_platform_data mx53_evk_fec_pdata = {
+static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 

arch/arm/mach-mx5/board-mx53_loco.c

@@ -242,7 +242,7 @@ static inline void mx53_loco_fec_reset(void)
 	gpio_set_value(LOCO_FEC_PHY_RST, 1);
 }
 
-static struct fec_platform_data mx53_loco_fec_data = {
+static const struct fec_platform_data mx53_loco_fec_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 

arch/arm/mach-mx5/board-mx53_smd.c

@@ -104,7 +104,7 @@ static inline void mx53_smd_fec_reset(void)
 	gpio_set_value(SMD_FEC_PHY_RST, 1);
 }
 
-static struct fec_platform_data mx53_smd_fec_data = {
+static const struct fec_platform_data mx53_smd_fec_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 

arch/arm/mach-mx5/cpu.c

@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <mach/hardware.h>
-#include <asm/io.h>
+#include <linux/io.h>
 
 static int mx5_cpu_rev = -1;
 
@@ -67,7 +67,8 @@ static int __init mx51_neon_fixup(void)
 	if (!cpu_is_mx51())
 		return 0;
 
-	if (mx51_revision() < IMX_CHIP_REVISION_3_0 && (elf_hwcap & HWCAP_NEON)) {
+	if (mx51_revision() < IMX_CHIP_REVISION_3_0 &&
+			(elf_hwcap & HWCAP_NEON)) {
 		elf_hwcap &= ~HWCAP_NEON;
 		pr_info("Turning off NEON support, detected broken NEON implementation\n");
 	}

arch/arm/mach-mx5/imx51-dt.c

@@ -44,20 +44,22 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = {
 	{ /* sentinel */ }
 };
 
-static void __init imx51_tzic_add_irq_domain(struct device_node *np,
+static int __init imx51_tzic_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
 	irq_domain_add_simple(np, 0);
+	return 0;
 }
 
-static void __init imx51_gpio_add_irq_domain(struct device_node *np,
+static int __init imx51_gpio_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
-				   32 * 4; /* imx51 gets 4 gpio ports */
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
+	gpio_irq_base -= 32;
 	irq_domain_add_simple(np, gpio_irq_base);
-	gpio_irq_base += 32;
+
+	return 0;
 }
 
 static const struct of_device_id imx51_irq_match[] __initconst = {

arch/arm/mach-mx5/imx53-dt.c

@@ -48,20 +48,22 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = {
 	{ /* sentinel */ }
 };
 
-static void __init imx53_tzic_add_irq_domain(struct device_node *np,
+static int __init imx53_tzic_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
 	irq_domain_add_simple(np, 0);
+	return 0;
 }
 
-static void __init imx53_gpio_add_irq_domain(struct device_node *np,
+static int __init imx53_gpio_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS -
-				   32 * 7; /* imx53 gets 7 gpio ports */
+	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
+	gpio_irq_base -= 32;
 	irq_domain_add_simple(np, gpio_irq_base);
-	gpio_irq_base += 32;
+
+	return 0;
 }
 
 static const struct of_device_id imx53_irq_match[] __initconst = {

arch/arm/mach-mx5/mm.c

@@ -23,7 +23,9 @@
 
 static void imx5_idle(void)
 {
-	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	if (!need_resched())
+		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	local_irq_enable();
 }
 
 /*
@@ -89,7 +91,7 @@ void __init imx51_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-	imx_idle = imx5_idle;
+	pm_idle = imx5_idle;
 }
 
 void __init imx53_init_early(void)

arch/arm/mach-mxs/clock-mx28.c

@@ -404,7 +404,7 @@ static int name##_set_rate(struct clk *clk, unsigned long rate)		\
 	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##dr);		\
 	reg &= ~BM_CLKCTRL_##dr##_DIV;					\
 	reg |= div << BP_CLKCTRL_##dr##_DIV;				\
-	if (reg | (1 << clk->enable_shift)) {				\
+	if (reg & (1 << clk->enable_shift)) {				\
 		pr_err("%s: clock is gated\n", __func__);		\
 		return -EINVAL;						\
 	}								\

arch/arm/mach-mxs/include/mach/mx28.h

@@ -104,8 +104,8 @@
 #define MX28_INT_CAN1			9
 #define MX28_INT_LRADC_TOUCH		10
 #define MX28_INT_HSADC			13
-#define MX28_INT_IRADC_THRESH0		14
-#define MX28_INT_IRADC_THRESH1		15
+#define MX28_INT_LRADC_THRESH0		14
+#define MX28_INT_LRADC_THRESH1		15
 #define MX28_INT_LRADC_CH0		16
 #define MX28_INT_LRADC_CH1		17
 #define MX28_INT_LRADC_CH2		18

arch/arm/mach-mxs/include/mach/mxs.h

@@ -30,6 +30,7 @@
  */
 #define cpu_is_mx23()		(					\
 		machine_is_mx23evk() ||					\
+		machine_is_stmp378x() ||				\
 		0)
 #define cpu_is_mx28()		(					\
 		machine_is_mx28evk() ||					\

arch/arm/mach-mxs/mach-m28evk.c

@@ -361,6 +361,6 @@ static struct sys_timer m28evk_timer = {
 MACHINE_START(M28EVK, "DENX M28 EVK")
 	.map_io		= mx28_map_io,
 	.init_irq	= mx28_init_irq,
-	.init_machine	= m28evk_init,
 	.timer		= &m28evk_timer,
+	.init_machine	= m28evk_init,
 MACHINE_END

arch/arm/mach-mxs/mach-stmp378x_devb.c

@@ -115,6 +115,6 @@ static struct sys_timer stmp378x_dvb_timer = {
 MACHINE_START(STMP378X, "STMP378X")
 	.map_io		= mx23_map_io,
 	.init_irq	= mx23_init_irq,
-	.init_machine	= stmp378x_dvb_init,
 	.timer		= &stmp378x_dvb_timer,
+	.init_machine	= stmp378x_dvb_init,
 MACHINE_END

arch/arm/mach-mxs/module-tx28.c

@@ -66,11 +66,11 @@ static const iomux_cfg_t tx28_fec1_pads[] __initconst = {
 	MX28_PAD_ENET0_CRS__ENET1_RX_EN,
 };
 
-static struct fec_platform_data tx28_fec0_data = {
+static const struct fec_platform_data tx28_fec0_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 
-static struct fec_platform_data tx28_fec1_data = {
+static const struct fec_platform_data tx28_fec1_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };