|
|
@@ -814,9 +814,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
|
|
|
|
|
|
/* Some of the VGA cameras require the memory pointer
|
|
|
* to be set to 0 again. We have been forced to start the
|
|
|
- * stream somewhere else to detect the hardware, and closed it,
|
|
|
- * and now since we are restarting the stream we need to do a
|
|
|
- * completely fresh and clean start. */
|
|
|
+ * stream in sd_config() to detect the hardware, and closed it.
|
|
|
+ * Thus, we need here to do a completely fresh and clean start. */
|
|
|
err_code = zero_the_pointer(gspca_dev);
|
|
|
if (err_code < 0)
|
|
|
return err_code;
|
|
|
@@ -875,7 +874,7 @@ static void setbrightness(struct gspca_dev *gspca_dev)
|
|
|
value_reg += 4;
|
|
|
}
|
|
|
|
|
|
- /* Note register 7 is also seen as 0x8x or 0xCx in dumps */
|
|
|
+ /* Note register 7 is also seen as 0x8x or 0xCx in some dumps */
|
|
|
if (sd->brightness > 0) {
|
|
|
sensor_write1(gspca_dev, sign_reg, 0x00);
|
|
|
val = sd->brightness;
|
|
|
@@ -900,7 +899,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
|
|
|
return;
|
|
|
|
|
|
if (sd->cam_type == CAM_TYPE_CIF && sd->sensor_type == 1) {
|
|
|
- /* This cam does not like exposure settings > 300,
|
|
|
+ /* This cam does not like exposure settings < 300,
|
|
|
so scale 0 - 4095 to 300 - 4095 */
|
|
|
exposure = (sd->exposure * 9267) / 10000 + 300;
|
|
|
sensor_write1(gspca_dev, 3, exposure >> 4);
|
|
|
@@ -908,7 +907,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
|
|
|
} else {
|
|
|
/* We have both a clock divider and an exposure register.
|
|
|
We first calculate the clock divider, as that determines
|
|
|
- the maximum exposure and then we calculayte the exposure
|
|
|
+ the maximum exposure and then we calculate the exposure
|
|
|
register setting (which goes from 0 - 511).
|
|
|
|
|
|
Note our 0 - 4095 exposure is mapped to 0 - 511
|
Theodore Kilgore