Merge branches 'at91', 'ep93xx', 'kexec', 'iop', 'lmb', 'nomadik', 'nuc', 'pl', 'spear' and 'versatile' into devel

arch/arm/Kconfig

@@ -10,6 +10,7 @@ config ARM
 	default y
 	select HAVE_AOUT
 	select HAVE_IDE
+	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
 	select GENERIC_ATOMIC64 if (!CPU_32v6K)
@@ -24,6 +25,7 @@ config ARM
 	select HAVE_KERNEL_LZMA
 	select HAVE_PERF_EVENTS
 	select PERF_USE_VMALLOC
+	select HAVE_REGS_AND_STACK_ACCESS_API
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -704,7 +706,6 @@ config ARCH_SHARK
 config ARCH_LH7A40X
 	bool "Sharp LH7A40X"
 	select CPU_ARM922T
-	select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
 	select ARCH_USES_GETTIMEOFFSET
 	help
@@ -1016,11 +1017,6 @@ endmenu
 
 source "arch/arm/common/Kconfig"
 
-config FORCE_MAX_ZONEORDER
-	int
-	depends on SA1111
-	default "9"
-
 menu "Bus support"
 
 config ARM_AMBA
@@ -1157,9 +1153,10 @@ config HOTPLUG_CPU
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
-		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
+		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
+		ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
 	default y
-	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
+	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_VEXPRESS || ARCH_OMAP4 || ARCH_U8500)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -1226,10 +1223,6 @@ config OABI_COMPAT
 config ARCH_HAS_HOLES_MEMORYMODEL
 	bool
 
-# Discontigmem is deprecated
-config ARCH_DISCONTIGMEM_ENABLE
-	bool
-
 config ARCH_SPARSEMEM_ENABLE
 	bool
 
@@ -1237,13 +1230,7 @@ config ARCH_SPARSEMEM_DEFAULT
 	def_bool ARCH_SPARSEMEM_ENABLE
 
 config ARCH_SELECT_MEMORY_MODEL
-	def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE
-
-config NODES_SHIFT
-	int
-	default "4" if ARCH_LH7A40X
-	default "2"
-	depends on NEED_MULTIPLE_NODES
+	def_bool ARCH_SPARSEMEM_ENABLE
 
 config HIGHMEM
 	bool "High Memory Support (EXPERIMENTAL)"
@@ -1275,8 +1262,36 @@ config HW_PERF_EVENTS
 	  Enable hardware performance counter support for perf events. If
 	  disabled, perf events will use software events only.
 
+config SPARSE_IRQ
+	bool "Support sparse irq numbering"
+	depends on EXPERIMENTAL
+	help
+	  This enables support for sparse irqs. This is useful in general
+	  as most CPUs have a fairly sparse array of IRQ vectors, which
+	  the irq_desc then maps directly on to. Systems with a high
+	  number of off-chip IRQs will want to treat this as
+	  experimental until they have been independently verified.
+
+	  If you don't know what to do here, say N.
+
 source "mm/Kconfig"
 
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order" if ARCH_SHMOBILE
+	range 11 64 if ARCH_SHMOBILE
+	default "9" if SA1111
+	default "11"
+	help
+	  The kernel memory allocator divides physically contiguous memory
+	  blocks into "zones", where each zone is a power of two number of
+	  pages.  This option selects the largest power of two that the kernel
+	  keeps in the memory allocator.  If you need to allocate very large
+	  blocks of physically contiguous memory, then you may need to
+	  increase this value.
+
+	  This config option is actually maximum order plus one. For example,
+	  a value of 11 means that the largest free memory block is 2^10 pages.
+
 config LEDS
 	bool "Timer and CPU usage LEDs"
 	depends on ARCH_CDB89712 || ARCH_EBSA110 || \

arch/arm/common/gic.c

@@ -108,6 +108,51 @@ static void gic_unmask_irq(unsigned int irq)
 	spin_unlock(&irq_controller_lock);
 }
 
+static int gic_set_type(unsigned int irq, unsigned int type)
+{
+	void __iomem *base = gic_dist_base(irq);
+	unsigned int gicirq = gic_irq(irq);
+	u32 enablemask = 1 << (gicirq % 32);
+	u32 enableoff = (gicirq / 32) * 4;
+	u32 confmask = 0x2 << ((gicirq % 16) * 2);
+	u32 confoff = (gicirq / 16) * 4;
+	bool enabled = false;
+	u32 val;
+
+	/* Interrupt configuration for SGIs can't be changed */
+	if (gicirq < 16)
+		return -EINVAL;
+
+	if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING)
+		return -EINVAL;
+
+	spin_lock(&irq_controller_lock);
+
+	val = readl(base + GIC_DIST_CONFIG + confoff);
+	if (type == IRQ_TYPE_LEVEL_HIGH)
+		val &= ~confmask;
+	else if (type == IRQ_TYPE_EDGE_RISING)
+		val |= confmask;
+
+	/*
+	 * As recommended by the spec, disable the interrupt before changing
+	 * the configuration
+	 */
+	if (readl(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) {
+		writel(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff);
+		enabled = true;
+	}
+
+	writel(val, base + GIC_DIST_CONFIG + confoff);
+
+	if (enabled)
+		writel(enablemask, base + GIC_DIST_ENABLE_SET + enableoff);
+
+	spin_unlock(&irq_controller_lock);
+
+	return 0;
+}
+
 #ifdef CONFIG_SMP
 static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 {
@@ -161,6 +206,7 @@ static struct irq_chip gic_chip = {
 	.ack		= gic_ack_irq,
 	.mask		= gic_mask_irq,
 	.unmask		= gic_unmask_irq,
+	.set_type	= gic_set_type,
 #ifdef CONFIG_SMP
 	.set_affinity	= gic_set_cpu,
 #endif

arch/arm/common/sa1111.c

@@ -185,13 +185,10 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	},
 };
 
-void __init sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+void __init sa1111_adjust_zones(unsigned long *size, unsigned long *holes)
 {
 	unsigned int sz = SZ_1M >> PAGE_SHIFT;
 
-	if (node != 0)
-		sz = 0;
-
 	size[1] = size[0] - sz;
 	size[0] = sz;
 }

arch/arm/include/asm/hwcap.h

@@ -19,6 +19,7 @@
 #define HWCAP_NEON	4096
 #define HWCAP_VFPv3	8192
 #define HWCAP_VFPv3D16	16384
+#define HWCAP_TLS	32768
 
 #if defined(__KERNEL__) && !defined(__ASSEMBLY__)
 /*

arch/arm/include/asm/irq.h

@@ -7,6 +7,8 @@
 #define irq_canonicalize(i)	(i)
 #endif
 
+#define NR_IRQS_LEGACY	16
+
 /*
  * Use this value to indicate lack of interrupt
  * capability

arch/arm/include/asm/kexec.h

@@ -19,10 +19,26 @@
 
 #ifndef __ASSEMBLY__
 
-struct kimage;
-/* Provide a dummy definition to avoid build failures. */
+/**
+ * crash_setup_regs() - save registers for the panic kernel
+ * @newregs: registers are saved here
+ * @oldregs: registers to be saved (may be %NULL)
+ *
+ * Function copies machine registers from @oldregs to @newregs. If @oldregs is
+ * %NULL then current registers are stored there.
+ */
 static inline void crash_setup_regs(struct pt_regs *newregs,
-                                        struct pt_regs *oldregs) { }
+				    struct pt_regs *oldregs)
+{
+	if (oldregs) {
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	} else {
+		__asm__ __volatile__ ("stmia %0, {r0 - r15}"
+				      : : "r" (&newregs->ARM_r0));
+		__asm__ __volatile__ ("mrs %0, cpsr"
+				      : "=r" (newregs->ARM_cpsr));
+	}
+}
 
 #endif /* __ASSEMBLY__ */
 

arch/arm/include/asm/mach/arch.h

@@ -20,6 +20,7 @@ struct machine_desc {
 	 * by assembler code in head.S, head-common.S
 	 */
 	unsigned int		nr;		/* architecture number	*/
+	unsigned int		nr_irqs;	/* number of IRQs */
 	unsigned int		phys_io;	/* start of physical io	*/
 	unsigned int		io_pg_offst;	/* byte offset for io 
 						 * page tabe entry	*/
@@ -37,6 +38,7 @@ struct machine_desc {
 	void			(*fixup)(struct machine_desc *,
 					 struct tag *, char **,
 					 struct meminfo *);
+	void			(*reserve)(void);/* reserve mem blocks	*/
 	void			(*map_io)(void);/* IO mapping function	*/
 	void			(*init_irq)(void);
 	struct sys_timer	*timer;		/* system tick timer	*/

arch/arm/include/asm/mach/irq.h

@@ -17,6 +17,7 @@ struct seq_file;
 /*
  * This is internal.  Do not use it.
  */
+extern unsigned int arch_nr_irqs;
 extern void (*init_arch_irq)(void);
 extern void init_FIQ(void);
 extern int show_fiq_list(struct seq_file *, void *);

arch/arm/include/asm/memblock.h

@@ -0,0 +1,16 @@
+#ifndef _ASM_ARM_MEMBLOCK_H
+#define _ASM_ARM_MEMBLOCK_H
+
+#ifdef CONFIG_MMU
+extern phys_addr_t lowmem_end_addr;
+#define MEMBLOCK_REAL_LIMIT	lowmem_end_addr
+#else
+#define MEMBLOCK_REAL_LIMIT	0
+#endif
+
+struct meminfo;
+struct machine_desc;
+
+extern void arm_memblock_init(struct meminfo *, struct machine_desc *);
+
+#endif

arch/arm/include/asm/memory.h

@@ -158,7 +158,7 @@
 #endif
 
 #ifndef arch_adjust_zones
-#define arch_adjust_zones(node,size,holes) do { } while (0)
+#define arch_adjust_zones(size,holes) do { } while (0)
 #elif !defined(CONFIG_ZONE_DMA)
 #error "custom arch_adjust_zones() requires CONFIG_ZONE_DMA"
 #endif
@@ -234,76 +234,11 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
  *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
  *  virt_addr_valid(k)	indicates whether a virtual address is valid
  */
-#ifndef CONFIG_DISCONTIGMEM
-
 #define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
 
 #define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
 #define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
 
-#define PHYS_TO_NID(addr)	(0)
-
-#else /* CONFIG_DISCONTIGMEM */
-
-/*
- * This is more complex.  We have a set of mem_map arrays spread
- * around in memory.
- */
-#include <linux/numa.h>
-
-#define arch_pfn_to_nid(pfn)	PFN_TO_NID(pfn)
-#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
-
-#define virt_to_page(kaddr)					\
-	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
-
-#define virt_addr_valid(kaddr)	(KVADDR_TO_NID(kaddr) < MAX_NUMNODES)
-
-/*
- * Common discontigmem stuff.
- *  PHYS_TO_NID is used by the ARM kernel/setup.c
- */
-#define PHYS_TO_NID(addr)	PFN_TO_NID((addr) >> PAGE_SHIFT)
-
-/*
- * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define ADDR_TO_MAPBASE(kaddr)	NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
-
-/*
- * Given a page frame number, find the owning node of the memory
- * and returns the mem_map of that node.
- */
-#define PFN_TO_MAPBASE(pfn)	NODE_MEM_MAP(PFN_TO_NID(pfn))
-
-#ifdef NODE_MEM_SIZE_BITS
-#define NODE_MEM_SIZE_MASK	((1 << NODE_MEM_SIZE_BITS) - 1)
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-#define KVADDR_TO_NID(addr) \
-	(((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS)
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-#define PFN_TO_NID(pfn) \
-	(((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT))
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-#define LOCAL_MAP_NR(addr) \
-	(((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT)
-
-#endif /* NODE_MEM_SIZE_BITS */
-
-#endif /* !CONFIG_DISCONTIGMEM */
-
 /*
  * Optional coherency support.  Currently used only by selected
  * Intel XSC3-based systems.

arch/arm/include/asm/mmzone.h

@@ -1,30 +0,0 @@
-/*
- *  arch/arm/include/asm/mmzone.h
- *
- *  1999-12-29	Nicolas Pitre		Created
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_MMZONE_H
-#define __ASM_MMZONE_H
-
-/*
- * Currently defined in arch/arm/mm/discontig.c
- */
-extern pg_data_t discontig_node_data[];
-
-/*
- * Return a pointer to the node data for node n.
- */
-#define NODE_DATA(nid)		(&discontig_node_data[nid])
-
-/*
- * NODE_MEM_MAP gives the kaddr for the mem_map of the node.
- */
-#define NODE_MEM_MAP(nid)	(NODE_DATA(nid)->node_mem_map)
-
-#include <mach/memory.h>
-
-#endif

arch/arm/include/asm/ptrace.h

@@ -184,6 +184,42 @@ extern unsigned long profile_pc(struct pt_regs *regs);
 #define predicate(x)		((x) & 0xf0000000)
 #define PREDICATE_ALWAYS	0xe0000000
 
+/*
+ * kprobe-based event tracer support
+ */
+#include <linux/stddef.h>
+#include <linux/types.h>
+#define MAX_REG_OFFSET (offsetof(struct pt_regs, ARM_ORIG_r0))
+
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+extern bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr);
+extern unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+					       unsigned int n);
+
+/**
+ * regs_get_register() - get register value from its offset
+ * @regs:	   pt_regs from which register value is gotten
+ * @offset:    offset number of the register.
+ *
+ * regs_get_register returns the value of a register whose offset from @regs.
+ * The @offset is the offset of the register in struct pt_regs.
+ * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
+ */
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+					      unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
+/* Valid only for Kernel mode traps. */
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
+{
+	return regs->ARM_sp;
+}
+
 #endif /* __KERNEL__ */
 
 #endif /* __ASSEMBLY__ */

arch/arm/include/asm/setup.h

@@ -201,8 +201,7 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn }
 struct membank {
 	unsigned long start;
 	unsigned long size;
-	unsigned short node;
-	unsigned short highmem;
+	unsigned int highmem;
 };
 
 struct meminfo {
@@ -212,9 +211,8 @@ struct meminfo {
 
 extern struct meminfo meminfo;
 
-#define for_each_nodebank(iter,mi,no)			\
-	for (iter = 0; iter < (mi)->nr_banks; iter++)	\
-		if ((mi)->bank[iter].node == no)
+#define for_each_bank(iter,mi)				\
+	for (iter = 0; iter < (mi)->nr_banks; iter++)
 
 #define bank_pfn_start(bank)	__phys_to_pfn((bank)->start)
 #define bank_pfn_end(bank)	__phys_to_pfn((bank)->start + (bank)->size)

arch/arm/include/asm/tls.h

@@ -0,0 +1,46 @@
+#ifndef __ASMARM_TLS_H
+#define __ASMARM_TLS_H
+
+#ifdef __ASSEMBLY__
+	.macro set_tls_none, tp, tmp1, tmp2
+	.endm
+
+	.macro set_tls_v6k, tp, tmp1, tmp2
+	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
+	.endm
+
+	.macro set_tls_v6, tp, tmp1, tmp2
+	ldr	\tmp1, =elf_hwcap
+	ldr	\tmp1, [\tmp1, #0]
+	mov	\tmp2, #0xffff0fff
+	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
+	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
+	.endm
+
+	.macro set_tls_software, tp, tmp1, tmp2
+	mov	\tmp1, #0xffff0fff
+	str	\tp, [\tmp1, #-15]		@ set TLS value at 0xffff0ff0
+	.endm
+#endif
+
+#ifdef CONFIG_TLS_REG_EMUL
+#define tls_emu		1
+#define has_tls_reg		1
+#define set_tls		set_tls_none
+#elif __LINUX_ARM_ARCH__ >= 7 ||					\
+	(__LINUX_ARM_ARCH__ == 6 && defined(CONFIG_CPU_32v6K))
+#define tls_emu		0
+#define has_tls_reg		1
+#define set_tls		set_tls_v6k
+#elif __LINUX_ARM_ARCH__ == 6
+#define tls_emu		0
+#define has_tls_reg		(elf_hwcap & HWCAP_TLS)
+#define set_tls		set_tls_v6
+#else
+#define tls_emu		0
+#define has_tls_reg		0
+#define set_tls		set_tls_software
+#endif
+
+#endif	/* __ASMARM_TLS_H */

arch/arm/include/asm/vfpmacros.h

@@ -3,6 +3,8 @@
  *
  * Assembler-only file containing VFP macros and register definitions.
  */
+#include <asm/hwcap.h>
+
 #include "vfp.h"
 
 @ Macros to allow building with old toolkits (with no VFP support)
@@ -22,11 +24,19 @@
 	LDC	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d0-d15}
 #endif
 #ifdef CONFIG_VFPv3
+#if __LINUX_ARM_ARCH__ <= 6
+	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
+	ldr	\tmp, [\tmp, #0]
+	tst	\tmp, #HWCAP_VFPv3D16
+	ldceq	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	addne	\base, \base, #32*4		    @ step over unused register space
+#else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
 	cmp	\tmp, #2			    @ 32 x 64bit registers?
 	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
+#endif
 #endif
 	.endm
 
@@ -38,10 +48,18 @@
 	STC	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d0-d15}
 #endif
 #ifdef CONFIG_VFPv3
+#if __LINUX_ARM_ARCH__ <= 6
+	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
+	ldr	\tmp, [\tmp, #0]
+	tst	\tmp, #HWCAP_VFPv3D16
+	stceq	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	addne	\base, \base, #32*4		    @ step over unused register space
+#else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
 	cmp	\tmp, #2			    @ 32 x 64bit registers?
 	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
+#endif
 #endif
 	.endm

arch/arm/kernel/Makefile

@@ -39,6 +39,7 @@ obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
 obj-$(CONFIG_HAVE_TCM)		+= tcm.o
+obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312

arch/arm/kernel/crash_dump.c

@@ -0,0 +1,60 @@
+/*
+ * arch/arm/kernel/crash_dump.c
+ *
+ * Copyright (C) 2010 Nokia Corporation.
+ * Author: Mika Westerberg
+ *
+ * This code is taken from arch/x86/kernel/crash_dump_64.c
+ *   Created by: Hariprasad Nellitheertha (hari@in.ibm.com)
+ *   Copyright (C) IBM Corporation, 2004. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/crash_dump.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+
+/* stores the physical address of elf header of crash image */
+unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+
+/**
+ * copy_oldmem_page() - copy one page from old kernel memory
+ * @pfn: page frame number to be copied
+ * @buf: buffer where the copied page is placed
+ * @csize: number of bytes to copy
+ * @offset: offset in bytes into the page
+ * @userbuf: if set, @buf is int he user address space
+ *
+ * This function copies one page from old kernel memory into buffer pointed by
+ * @buf. If @buf is in userspace, set @userbuf to %1. Returns number of bytes
+ * copied or negative error in case of failure.
+ */
+ssize_t copy_oldmem_page(unsigned long pfn, char *buf,
+			 size_t csize, unsigned long offset,
+			 int userbuf)
+{
+	void *vaddr;
+
+	if (!csize)
+		return 0;
+
+	vaddr = ioremap(pfn << PAGE_SHIFT, PAGE_SIZE);
+	if (!vaddr)
+		return -ENOMEM;
+
+	if (userbuf) {
+		if (copy_to_user(buf, vaddr + offset, csize)) {
+			iounmap(vaddr);
+			return -EFAULT;
+		}
+	} else {
+		memcpy(buf, vaddr + offset, csize);
+	}
+
+	iounmap(vaddr);
+	return csize;
+}

arch/arm/kernel/entry-armv.S

@@ -22,6 +22,7 @@
 #include <asm/thread_notify.h>
 #include <asm/unwind.h>
 #include <asm/unistd.h>
+#include <asm/tls.h>
 
 #include "entry-header.S"
 
@@ -735,12 +736,7 @@ ENTRY(__switch_to)
 #ifdef CONFIG_MMU
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
-#if defined(CONFIG_HAS_TLS_REG)
-	mcr	p15, 0, r3, c13, c0, 3		@ set TLS register
-#elif !defined(CONFIG_TLS_REG_EMUL)
-	mov	r4, #0xffff0fff
-	str	r3, [r4, #-15]			@ TLS val at 0xffff0ff0
-#endif
+	set_tls	r3, r4, r5
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r6, c3, c0, 0		@ Set domain register
 #endif
@@ -1005,17 +1001,12 @@ kuser_cmpxchg_fixup:
  */
 
 __kuser_get_tls:				@ 0xffff0fe0
-
-#if !defined(CONFIG_HAS_TLS_REG) && !defined(CONFIG_TLS_REG_EMUL)
-	ldr	r0, [pc, #(16 - 8)]		@ TLS stored at 0xffff0ff0
-#else
-	mrc	p15, 0, r0, c13, c0, 3		@ read TLS register
-#endif
+	ldr	r0, [pc, #(16 - 8)]	@ read TLS, set in kuser_get_tls_init
 	usr_ret	lr
-
-	.rep	5
-	.word	0			@ pad up to __kuser_helper_version
-	.endr
+	mrc	p15, 0, r0, c13, c0, 3	@ 0xffff0fe8 hardware TLS code
+	.rep	4
+	.word	0			@ 0xffff0ff0 software TLS value, then
+	.endr				@ pad up to __kuser_helper_version
 
 /*
  * Reference declaration:

arch/arm/kernel/irq.c

@@ -47,12 +47,14 @@
 #define irq_finish(irq) do { } while (0)
 #endif
 
+unsigned int arch_nr_irqs;
 void (*init_arch_irq)(void) __initdata = NULL;
 unsigned long irq_err_count;
 
 int show_interrupts(struct seq_file *p, void *v)
 {
 	int i = *(loff_t *) v, cpu;
+	struct irq_desc *desc;
 	struct irqaction * action;
 	unsigned long flags;
 
@@ -67,24 +69,25 @@ int show_interrupts(struct seq_file *p, void *v)
 		seq_putc(p, '\n');
 	}
 
-	if (i < NR_IRQS) {
-		raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
-		action = irq_desc[i].action;
+	if (i < nr_irqs) {
+		desc = irq_to_desc(i);
+		raw_spin_lock_irqsave(&desc->lock, flags);
+		action = desc->action;
 		if (!action)
 			goto unlock;
 
 		seq_printf(p, "%3d: ", i);
 		for_each_present_cpu(cpu)
 			seq_printf(p, "%10u ", kstat_irqs_cpu(i, cpu));
-		seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-");
+		seq_printf(p, " %10s", desc->chip->name ? : "-");
 		seq_printf(p, "  %s", action->name);
 		for (action = action->next; action; action = action->next)
 			seq_printf(p, ", %s", action->name);
 
 		seq_putc(p, '\n');
 unlock:
-		raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
-	} else if (i == NR_IRQS) {
+		raw_spin_unlock_irqrestore(&desc->lock, flags);
+	} else if (i == nr_irqs) {
 #ifdef CONFIG_FIQ
 		show_fiq_list(p, v);
 #endif
@@ -112,7 +115,7 @@ asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 	 * Some hardware gives randomly wrong interrupts.  Rather
 	 * than crashing, do something sensible.
 	 */
-	if (unlikely(irq >= NR_IRQS)) {
+	if (unlikely(irq >= nr_irqs)) {
 		if (printk_ratelimit())
 			printk(KERN_WARNING "Bad IRQ%u\n", irq);
 		ack_bad_irq(irq);
@@ -132,12 +135,12 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
 	struct irq_desc *desc;
 	unsigned long flags;
 
-	if (irq >= NR_IRQS) {
+	if (irq >= nr_irqs) {
 		printk(KERN_ERR "Trying to set irq flags for IRQ%d\n", irq);
 		return;
 	}
 
-	desc = irq_desc + irq;
+	desc = irq_to_desc(irq);
 	raw_spin_lock_irqsave(&desc->lock, flags);
 	desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
 	if (iflags & IRQF_VALID)
@@ -151,14 +154,25 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
 
 void __init init_IRQ(void)
 {
+	struct irq_desc *desc;
 	int irq;
 
-	for (irq = 0; irq < NR_IRQS; irq++)
-		irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE;
+	for (irq = 0; irq < nr_irqs; irq++) {
+		desc = irq_to_desc_alloc_node(irq, 0);
+		desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE;
+	}
 
 	init_arch_irq();
 }
 
+#ifdef CONFIG_SPARSE_IRQ
+int __init arch_probe_nr_irqs(void)
+{
+	nr_irqs = arch_nr_irqs ? arch_nr_irqs : NR_IRQS;
+	return 0;
+}
+#endif
+
 #ifdef CONFIG_HOTPLUG_CPU
 
 static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
@@ -178,10 +192,9 @@ static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
 void migrate_irqs(void)
 {
 	unsigned int i, cpu = smp_processor_id();
+	struct irq_desc *desc;
 
-	for (i = 0; i < NR_IRQS; i++) {
-		struct irq_desc *desc = irq_desc + i;
-
+	for_each_irq_desc(i, desc) {
 		if (desc->node == cpu) {
 			unsigned int newcpu = cpumask_any_and(desc->affinity,
 							      cpu_online_mask);

arch/arm/kernel/machine_kexec.c

@@ -43,6 +43,10 @@ void machine_shutdown(void)
 
 void machine_crash_shutdown(struct pt_regs *regs)
 {
+	local_irq_disable();
+	crash_save_cpu(regs, smp_processor_id());
+
+	printk(KERN_INFO "Loading crashdump kernel...\n");
 }
 
 void machine_kexec(struct kimage *image)

arch/arm/kernel/ptrace.c

@@ -52,6 +52,102 @@
 #define BREAKINST_THUMB	0xde01
 #endif
 
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
+
+#define REG_OFFSET_NAME(r) \
+	{.name = #r, .offset = offsetof(struct pt_regs, ARM_##r)}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+static const struct pt_regs_offset regoffset_table[] = {
+	REG_OFFSET_NAME(r0),
+	REG_OFFSET_NAME(r1),
+	REG_OFFSET_NAME(r2),
+	REG_OFFSET_NAME(r3),
+	REG_OFFSET_NAME(r4),
+	REG_OFFSET_NAME(r5),
+	REG_OFFSET_NAME(r6),
+	REG_OFFSET_NAME(r7),
+	REG_OFFSET_NAME(r8),
+	REG_OFFSET_NAME(r9),
+	REG_OFFSET_NAME(r10),
+	REG_OFFSET_NAME(fp),
+	REG_OFFSET_NAME(ip),
+	REG_OFFSET_NAME(sp),
+	REG_OFFSET_NAME(lr),
+	REG_OFFSET_NAME(pc),
+	REG_OFFSET_NAME(cpsr),
+	REG_OFFSET_NAME(ORIG_r0),
+	REG_OFFSET_END,
+};
+
+/**
+ * regs_query_register_offset() - query register offset from its name
+ * @name:	the name of a register
+ *
+ * regs_query_register_offset() returns the offset of a register in struct
+ * pt_regs from its name. If the name is invalid, this returns -EINVAL;
+ */
+int regs_query_register_offset(const char *name)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (!strcmp(roff->name, name))
+			return roff->offset;
+	return -EINVAL;
+}
+
+/**
+ * regs_query_register_name() - query register name from its offset
+ * @offset:	the offset of a register in struct pt_regs.
+ *
+ * regs_query_register_name() returns the name of a register from its
+ * offset in struct pt_regs. If the @offset is invalid, this returns NULL;
+ */
+const char *regs_query_register_name(unsigned int offset)
+{
+	const struct pt_regs_offset *roff;
+	for (roff = regoffset_table; roff->name != NULL; roff++)
+		if (roff->offset == offset)
+			return roff->name;
+	return NULL;
+}
+
+/**
+ * regs_within_kernel_stack() - check the address in the stack
+ * @regs:      pt_regs which contains kernel stack pointer.
+ * @addr:      address which is checked.
+ *
+ * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
+ * If @addr is within the kernel stack, it returns true. If not, returns false.
+ */
+bool regs_within_kernel_stack(struct pt_regs *regs, unsigned long addr)
+{
+	return ((addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
+}
+
+/**
+ * regs_get_kernel_stack_nth() - get Nth entry of the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @n:		stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * this returns 0.
+ */
+unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs, unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
+}
+
 /*
  * this routine will get a word off of the processes privileged stack.
  * the offset is how far from the base addr as stored in the THREAD.

arch/arm/kernel/relocate_kernel.S

@@ -10,6 +10,12 @@ relocate_new_kernel:
 	ldr	r0,kexec_indirection_page
 	ldr	r1,kexec_start_address
 
+	/*
+	 * If there is no indirection page (we are doing crashdumps)
+	 * skip any relocation.
+	 */
+	cmp	r0, #0
+	beq	2f
 
 0:	/* top, read another word for the indirection page */
 	ldr	r3, [r0],#4

arch/arm/kernel/setup.c

@@ -19,12 +19,15 @@
 #include <linux/seq_file.h>
 #include <linux/screen_info.h>
 #include <linux/init.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
 #include <linux/smp.h>
 #include <linux/fs.h>
 #include <linux/proc_fs.h>
+#include <linux/memblock.h>
 
 #include <asm/unified.h>
 #include <asm/cpu.h>
@@ -269,6 +272,21 @@ static void __init cacheid_init(void)
 extern struct proc_info_list *lookup_processor_type(unsigned int);
 extern struct machine_desc *lookup_machine_type(unsigned int);
 
+static void __init feat_v6_fixup(void)
+{
+	int id = read_cpuid_id();
+
+	if ((id & 0xff0f0000) != 0x41070000)
+		return;
+
+	/*
+	 * HWCAP_TLS is available only on 1136 r1p0 and later,
+	 * see also kuser_get_tls_init.
+	 */
+	if ((((id >> 4) & 0xfff) == 0xb36) && (((id >> 20) & 3) == 0))
+		elf_hwcap &= ~HWCAP_TLS;
+}
+
 static void __init setup_processor(void)
 {
 	struct proc_info_list *list;
@@ -311,6 +329,8 @@ static void __init setup_processor(void)
 	elf_hwcap &= ~HWCAP_THUMB;
 #endif
 
+	feat_v6_fixup();
+
 	cacheid_init();
 	cpu_proc_init();
 }
@@ -402,13 +422,12 @@ static int __init arm_add_memory(unsigned long start, unsigned long size)
 	size -= start & ~PAGE_MASK;
 	bank->start = PAGE_ALIGN(start);
 	bank->size  = size & PAGE_MASK;
-	bank->node  = PHYS_TO_NID(start);
 
 	/*
 	 * Check whether this memory region has non-zero size or
 	 * invalid node number.
 	 */
-	if (bank->size == 0 || bank->node >= MAX_NUMNODES)
+	if (bank->size == 0)
 		return -EINVAL;
 
 	meminfo.nr_banks++;
@@ -663,6 +682,79 @@ static int __init customize_machine(void)
 }
 arch_initcall(customize_machine);
 
+#ifdef CONFIG_KEXEC
+static inline unsigned long long get_total_mem(void)
+{
+	unsigned long total;
+
+	total = max_low_pfn - min_low_pfn;
+	return total << PAGE_SHIFT;
+}
+
+/**
+ * reserve_crashkernel() - reserves memory are for crash kernel
+ *
+ * This function reserves memory area given in "crashkernel=" kernel command
+ * line parameter. The memory reserved is used by a dump capture kernel when
+ * primary kernel is crashing.
+ */
+static void __init reserve_crashkernel(void)
+{
+	unsigned long long crash_size, crash_base;
+	unsigned long long total_mem;
+	int ret;
+
+	total_mem = get_total_mem();
+	ret = parse_crashkernel(boot_command_line, total_mem,
+				&crash_size, &crash_base);
+	if (ret)
+		return;
+
+	ret = reserve_bootmem(crash_base, crash_size, BOOTMEM_EXCLUSIVE);
+	if (ret < 0) {
+		printk(KERN_WARNING "crashkernel reservation failed - "
+		       "memory is in use (0x%lx)\n", (unsigned long)crash_base);
+		return;
+	}
+
+	printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
+	       "for crashkernel (System RAM: %ldMB)\n",
+	       (unsigned long)(crash_size >> 20),
+	       (unsigned long)(crash_base >> 20),
+	       (unsigned long)(total_mem >> 20));
+
+	crashk_res.start = crash_base;
+	crashk_res.end = crash_base + crash_size - 1;
+	insert_resource(&iomem_resource, &crashk_res);
+}
+#else
+static inline void reserve_crashkernel(void) {}
+#endif /* CONFIG_KEXEC */
+
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
+
+#ifdef CONFIG_CRASH_DUMP
+/*
+ * elfcorehdr= specifies the location of elf core header stored by the crashed
+ * kernel. This option will be passed by kexec loader to the capture kernel.
+ */
+static int __init setup_elfcorehdr(char *arg)
+{
+	char *end;
+
+	if (!arg)
+		return -EINVAL;
+
+	elfcorehdr_addr = memparse(arg, &end);
+	return end > arg ? 0 : -EINVAL;
+}
+early_param("elfcorehdr", setup_elfcorehdr);
+#endif /* CONFIG_CRASH_DUMP */
+
 void __init setup_arch(char **cmdline_p)
 {
 	struct tag *tags = (struct tag *)&init_tags;
@@ -716,12 +808,15 @@ void __init setup_arch(char **cmdline_p)
 
 	parse_early_param();
 
+	arm_memblock_init(&meminfo, mdesc);
+
 	paging_init(mdesc);
 	request_standard_resources(&meminfo, mdesc);
 
 #ifdef CONFIG_SMP
 	smp_init_cpus();
 #endif
+	reserve_crashkernel();
 
 	cpu_init();
 	tcm_init();
@@ -729,6 +824,7 @@ void __init setup_arch(char **cmdline_p)
 	/*
 	 * Set up various architecture-specific pointers
 	 */
+	arch_nr_irqs = mdesc->nr_irqs;
 	init_arch_irq = mdesc->init_irq;
 	system_timer = mdesc->timer;
 	init_machine = mdesc->init_machine;

arch/arm/kernel/traps.c

@@ -30,6 +30,7 @@
 #include <asm/unistd.h>
 #include <asm/traps.h>
 #include <asm/unwind.h>
+#include <asm/tls.h>
 
 #include "ptrace.h"
 #include "signal.h"
@@ -518,17 +519,20 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 
 	case NR(set_tls):
 		thread->tp_value = regs->ARM_r0;
-#if defined(CONFIG_HAS_TLS_REG)
-		asm ("mcr p15, 0, %0, c13, c0, 3" : : "r" (regs->ARM_r0) );
-#elif !defined(CONFIG_TLS_REG_EMUL)
-		/*
-		 * User space must never try to access this directly.
-		 * Expect your app to break eventually if you do so.
-		 * The user helper at 0xffff0fe0 must be used instead.
-		 * (see entry-armv.S for details)
-		 */
-		*((unsigned int *)0xffff0ff0) = regs->ARM_r0;
-#endif
+		if (tls_emu)
+			return 0;
+		if (has_tls_reg) {
+			asm ("mcr p15, 0, %0, c13, c0, 3"
+				: : "r" (regs->ARM_r0));
+		} else {
+			/*
+			 * User space must never try to access this directly.
+			 * Expect your app to break eventually if you do so.
+			 * The user helper at 0xffff0fe0 must be used instead.
+			 * (see entry-armv.S for details)
+			 */
+			*((unsigned int *)0xffff0ff0) = regs->ARM_r0;
+		}
 		return 0;
 
 #ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG
@@ -743,6 +747,16 @@ void __init trap_init(void)
 	return;
 }
 
+static void __init kuser_get_tls_init(unsigned long vectors)
+{
+	/*
+	 * vectors + 0xfe0 = __kuser_get_tls
+	 * vectors + 0xfe8 = hardware TLS instruction at 0xffff0fe8
+	 */
+	if (tls_emu || has_tls_reg)
+		memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4);
+}
+
 void __init early_trap_init(void)
 {
 	unsigned long vectors = CONFIG_VECTORS_BASE;
@@ -760,6 +774,11 @@ void __init early_trap_init(void)
 	memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start);
 	memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
 
+	/*
+	 * Do processor specific fixups for the kuser helpers
+	 */
+	kuser_get_tls_init(vectors);
+
 	/*
 	 * Copy signal return handlers into the vector page, and
 	 * set sigreturn to be a pointer to these.

arch/arm/mach-aaec2000/include/mach/memory.h

@@ -14,14 +14,4 @@
 
 #define PHYS_OFFSET	UL(0xf0000000)
 
-/*
- * The nodes are the followings:
- *
- *   node 0: 0xf000.0000 - 0xf3ff.ffff
- *   node 1: 0xf400.0000 - 0xf7ff.ffff
- *   node 2: 0xf800.0000 - 0xfbff.ffff
- *   node 3: 0xfc00.0000 - 0xffff.ffff
- */
-#define NODE_MEM_SIZE_BITS	26
-
 #endif /* __ASM_ARCH_MEMORY_H */

arch/arm/mach-at91/Kconfig

@@ -366,6 +366,17 @@ config MACH_STAMP9G20
 
 endif
 
+if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
+comment "AT91SAM9260/AT91SAM9G20 boards"
+
+config MACH_SNAPPER_9260
+        bool "Bluewater Systems Snapper 9260/9G20 module"
+        help
+          Select this if you are using the Bluewater Systems Snapper 9260 or
+          Snapper 9G20 modules.
+          <http://www.bluewatersys.com/>
+endif
+
 # ----------------------------------------------------------
 
 if ARCH_AT91SAM9G45

arch/arm/mach-at91/Makefile

@@ -66,6 +66,9 @@ obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
 obj-$(CONFIG_MACH_STAMP9G20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
 
+# AT91SAM9260/AT91SAM9G20 board-specific support
+obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
+
 # AT91SAM9G45 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
 

arch/arm/mach-at91/at91sam9g45.c

@@ -20,6 +20,7 @@
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
 #include <mach/at91_shdwc.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -176,6 +177,13 @@ static struct clk mmc1_clk = {
 	.type		= CLK_TYPE_PERIPHERAL,
 };
 
+/* Video decoder clock - Only for sam9m10/sam9m11 */
+static struct clk vdec_clk = {
+	.name		= "vdec_clk",
+	.pmc_mask	= 1 << AT91SAM9G45_ID_VDEC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
 /* One additional fake clock for ohci */
 static struct clk ohci_clk = {
 	.name		= "ohci_clk",
@@ -239,6 +247,9 @@ static void __init at91sam9g45_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
+		clk_register(&vdec_clk);
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 }

arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c

@@ -26,6 +26,9 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
@@ -235,6 +238,46 @@ static struct gpio_led ek_leds[] = {
 	}
 };
 
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("AVDD", "0-001b"),
+	REGULATOR_SUPPLY("HPVDD", "0-001b"),
+	REGULATOR_SUPPLY("DBVDD", "0-001b"),
+	REGULATOR_SUPPLY("DCVDD", "0-001b"),
+};
+
+static struct regulator_init_data ek_avdd_reg_init_data = {
+	.constraints	= {
+		.name	= "3V3",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies = ek_audio_consumer_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config ek_vdd_pdata = {
+	.supply_name	= "board-3V3",
+	.microvolts	= 3300000,
+	.gpio		= -EINVAL,
+	.enabled_at_boot = 0,
+	.init_data	= &ek_avdd_reg_init_data,
+};
+static struct platform_device ek_voltage_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_vdd_pdata,
+	},
+};
+static void __init ek_add_regulators(void)
+{
+	platform_device_register(&ek_voltage_regulator);
+}
+#else
+static void __init ek_add_regulators(void) {}
+#endif
+
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("24c512", 0x50),
@@ -256,6 +299,8 @@ static void __init ek_board_init(void)
 	ek_add_device_nand();
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
+	/* Regulators */
+	ek_add_regulators();
 	/* MMC */
 #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 	at91_add_device_mci(0, &ek_mmc_data);

arch/arm/mach-at91/board-sam9g20ek.c

@@ -27,6 +27,9 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/clk.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
 #include <asm/setup.h>
@@ -269,6 +272,46 @@ static void __init ek_add_device_buttons(void)
 static void __init ek_add_device_buttons(void) {}
 #endif
 
+#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
+static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
+	REGULATOR_SUPPLY("AVDD", "0-001b"),
+	REGULATOR_SUPPLY("HPVDD", "0-001b"),
+	REGULATOR_SUPPLY("DBVDD", "0-001b"),
+	REGULATOR_SUPPLY("DCVDD", "0-001b"),
+};
+
+static struct regulator_init_data ek_avdd_reg_init_data = {
+	.constraints	= {
+		.name	= "3V3",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+	.consumer_supplies = ek_audio_consumer_supplies,
+	.num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
+};
+
+static struct fixed_voltage_config ek_vdd_pdata = {
+	.supply_name	= "board-3V3",
+	.microvolts	= 3300000,
+	.gpio		= -EINVAL,
+	.enabled_at_boot = 0,
+	.init_data	= &ek_avdd_reg_init_data,
+};
+static struct platform_device ek_voltage_regulator = {
+	.name		= "reg-fixed-voltage",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_vdd_pdata,
+	},
+};
+static void __init ek_add_regulators(void)
+{
+	platform_device_register(&ek_voltage_regulator);
+}
+#else
+static void __init ek_add_regulators(void) {}
+#endif
+
 
 static struct i2c_board_info __initdata ek_i2c_devices[] = {
         {
@@ -294,6 +337,8 @@ static void __init ek_board_init(void)
 	ek_add_device_nand();
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
+	/* Regulators */
+	ek_add_regulators();
 	/* MMC */
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* I2C */

arch/arm/mach-at91/board-snapper9260.c

@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-at91/board-snapper9260.c
+ *
+ *  Copyright (C) 2010 Bluewater System Ltd
+ *
+ * Author: Andre Renaud <andre@bluewatersys.com>
+ * Author: Ryan Mallon  <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c/pca953x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+#define SNAPPER9260_IO_EXP_GPIO(x)	(NR_BUILTIN_GPIO + (x))
+
+static void __init snapper9260_map_io(void)
+{
+	at91sam9260_initialize(18432000);
+
+	/* Debug on ttyS0 */
+	at91_register_uart(0, 0, 0);
+	at91_set_serial_console(0);
+
+	at91_register_uart(AT91SAM9260_ID_US0, 1,
+			   ATMEL_UART_CTS | ATMEL_UART_RTS);
+	at91_register_uart(AT91SAM9260_ID_US1, 2,
+			   ATMEL_UART_CTS | ATMEL_UART_RTS);
+	at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
+}
+
+static void __init snapper9260_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+static struct at91_usbh_data __initdata snapper9260_usbh_data = {
+	.ports		= 2,
+};
+
+static struct at91_udc_data __initdata snapper9260_udc_data = {
+	.vbus_pin		= SNAPPER9260_IO_EXP_GPIO(5),
+	.vbus_active_low	= 1,
+	.vbus_polled		= 1,
+};
+
+static struct at91_eth_data snapper9260_macb_data = {
+	.is_rmii	= 1,
+};
+
+static struct mtd_partition __initdata snapper9260_nand_partitions[] = {
+	{
+		.name	= "Preboot",
+		.offset	= 0,
+		.size	= SZ_128K,
+	},
+	{
+		.name	= "Bootloader",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_256K,
+	},
+	{
+		.name	= "Environment",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_128K,
+	},
+	{
+		.name	= "Kernel",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_4M,
+	},
+	{
+		.name	= "Filesystem",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init
+snapper9260_nand_partition_info(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(snapper9260_nand_partitions);
+	return snapper9260_nand_partitions;
+}
+
+static struct atmel_nand_data __initdata snapper9260_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.partition_info	= snapper9260_nand_partition_info,
+	.bus_width_16	= 0,
+};
+
+static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 0,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 0,
+
+	.ncs_read_pulse		= 5,
+	.nrd_pulse		= 2,
+	.ncs_write_pulse	= 5,
+	.nwe_pulse		= 2,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= (AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+				   AT91_SMC_EXNWMODE_DISABLE),
+	.tdf_cycles		= 1,
+};
+
+static struct pca953x_platform_data snapper9260_io_expander_data = {
+	.gpio_base		= SNAPPER9260_IO_EXP_GPIO(0),
+};
+
+static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
+	{
+		/* IO expander */
+		I2C_BOARD_INFO("max7312", 0x28),
+		.platform_data = &snapper9260_io_expander_data,
+	},
+	{
+		/* Audio codec */
+		I2C_BOARD_INFO("tlv320aic23", 0x1a),
+	},
+	{
+		/* RTC */
+		I2C_BOARD_INFO("isl1208", 0x6f),
+	},
+};
+
+static void __init snapper9260_add_device_nand(void)
+{
+	at91_set_A_periph(AT91_PIN_PC14, 0);
+	sam9_smc_configure(3, &snapper9260_nand_smc_config);
+	at91_add_device_nand(&snapper9260_nand_data);
+}
+
+static void __init snapper9260_board_init(void)
+{
+	at91_add_device_i2c(snapper9260_i2c_devices,
+			    ARRAY_SIZE(snapper9260_i2c_devices));
+	at91_add_device_serial();
+	at91_add_device_usbh(&snapper9260_usbh_data);
+	at91_add_device_udc(&snapper9260_udc_data);
+	at91_add_device_eth(&snapper9260_macb_data);
+	at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK |
+						 ATMEL_SSC_TD | ATMEL_SSC_RD));
+	snapper9260_add_device_nand();
+}
+
+MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= snapper9260_map_io,
+	.init_irq	= snapper9260_init_irq,
+	.init_machine	= snapper9260_board_init,
+MACHINE_END
+
+

arch/arm/mach-at91/include/mach/at91cap9.h

@@ -84,7 +84,7 @@
  */
 #define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
 #define AT91_BCRAMC	(0xffffe400 - AT91_BASE_SYS)
-#define AT91_DDRSDRC	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_CCFG	(0xffffeb10 - AT91_BASE_SYS)

arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h

@@ -15,7 +15,7 @@
 #ifndef AT91CAP9_DDRSDR_H
 #define AT91CAP9_DDRSDR_H
 
-#define AT91_DDRSDRC_MR		(AT91_DDRSDRC + 0x00)	/* Mode Register */
+#define AT91_DDRSDRC_MR		0x00	/* Mode Register */
 #define		AT91_DDRSDRC_MODE	(0xf << 0)		/* Command Mode */
 #define			AT91_DDRSDRC_MODE_NORMAL		0
 #define			AT91_DDRSDRC_MODE_NOP		1
@@ -25,10 +25,10 @@
 #define			AT91_DDRSDRC_MODE_EXT_LMR	5
 #define			AT91_DDRSDRC_MODE_DEEP		6
 
-#define AT91_DDRSDRC_RTR	(AT91_DDRSDRC + 0x04)	/* Refresh Timer Register */
+#define AT91_DDRSDRC_RTR	0x04	/* Refresh Timer Register */
 #define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
 
-#define AT91_DDRSDRC_CR		(AT91_DDRSDRC + 0x08)	/* Configuration Register */
+#define AT91_DDRSDRC_CR		0x08	/* Configuration Register */
 #define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
 #define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
 #define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
@@ -49,7 +49,7 @@
 #define		AT91_DDRSDRC_DLL	(1 << 7)		/* Reset DLL */
 #define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
 
-#define AT91_DDRSDRC_T0PR	(AT91_DDRSDRC + 0x0C)	/* Timing 0 Register */
+#define AT91_DDRSDRC_T0PR	0x0C	/* Timing 0 Register */
 #define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
 #define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
 #define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
@@ -59,13 +59,13 @@
 #define		AT91_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
 #define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
 
-#define AT91_DDRSDRC_T1PR	(AT91_DDRSDRC + 0x10)	/* Timing 1 Register */
+#define AT91_DDRSDRC_T1PR	0x10	/* Timing 1 Register */
 #define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
 #define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
 #define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
 #define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
 
-#define AT91_DDRSDRC_LPR	(AT91_DDRSDRC + 0x18)	/* Low Power Register */
+#define AT91_DDRSDRC_LPR	0x18	/* Low Power Register */
 #define		AT91_DDRSDRC_LPCB		(3 << 0)	/* Low-power Configurations */
 #define			AT91_DDRSDRC_LPCB_DISABLE		0
 #define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
@@ -80,14 +80,14 @@
 #define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
 #define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
 
-#define AT91_DDRSDRC_MDR	(AT91_DDRSDRC + 0x1C)	/* Memory Device Register */
+#define AT91_DDRSDRC_MDR	0x1C	/* Memory Device Register */
 #define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
 #define			AT91_DDRSDRC_MD_SDR		0
 #define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
 #define			AT91_DDRSDRC_MD_DDR		2
 #define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
 
-#define AT91_DDRSDRC_DLLR	(AT91_DDRSDRC + 0x20)	/* DLL Information Register */
+#define AT91_DDRSDRC_DLLR	0x20	/* DLL Information Register */
 #define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
 #define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
 #define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
@@ -98,5 +98,11 @@
 #define		AT91_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
 #define		AT91_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
 
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+	at91_sys_read(AT91_DDRSDRC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+	at91_sys_write(AT91_DDRSDRC##num + reg, value)
+
 
 #endif

arch/arm/mach-at91/include/mach/at91sam9260.h

@@ -84,7 +84,7 @@
  * System Peripherals (offset from AT91_BASE_SYS)
  */
 #define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)

arch/arm/mach-at91/include/mach/at91sam9261.h

@@ -68,7 +68,7 @@
 /*
  * System Peripherals (offset from AT91_BASE_SYS)
  */
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)

arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h

@@ -0,0 +1,130 @@
+/*
+ * Header file for the Atmel DDR/SDR SDRAM Controller
+ *
+ * Copyright (C) 2010 Atmel Corporation
+ *	Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT91SAM9_DDRSDR_H
+#define AT91SAM9_DDRSDR_H
+
+#define AT91_DDRSDRC_MR		0x00	/* Mode Register */
+#define		AT91_DDRSDRC_MODE	(0x7 << 0)		/* Command Mode */
+#define			AT91_DDRSDRC_MODE_NORMAL	0
+#define			AT91_DDRSDRC_MODE_NOP		1
+#define			AT91_DDRSDRC_MODE_PRECHARGE	2
+#define			AT91_DDRSDRC_MODE_LMR		3
+#define			AT91_DDRSDRC_MODE_REFRESH	4
+#define			AT91_DDRSDRC_MODE_EXT_LMR	5
+#define			AT91_DDRSDRC_MODE_DEEP		6
+
+#define AT91_DDRSDRC_RTR	0x04	/* Refresh Timer Register */
+#define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
+
+#define AT91_DDRSDRC_CR		0x08	/* Configuration Register */
+#define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
+#define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
+#define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
+#define			AT91_DDRSDRC_NC_SDR10	(2 << 0)
+#define			AT91_DDRSDRC_NC_SDR11	(3 << 0)
+#define			AT91_DDRSDRC_NC_DDR9	(0 << 0)
+#define			AT91_DDRSDRC_NC_DDR10	(1 << 0)
+#define			AT91_DDRSDRC_NC_DDR11	(2 << 0)
+#define			AT91_DDRSDRC_NC_DDR12	(3 << 0)
+#define		AT91_DDRSDRC_NR		(3 << 2)		/* Number of Row Bits */
+#define			AT91_DDRSDRC_NR_11	(0 << 2)
+#define			AT91_DDRSDRC_NR_12	(1 << 2)
+#define			AT91_DDRSDRC_NR_13	(2 << 2)
+#define			AT91_DDRSDRC_NR_14	(3 << 2)
+#define		AT91_DDRSDRC_CAS	(7 << 4)		/* CAS Latency */
+#define			AT91_DDRSDRC_CAS_2	(2 << 4)
+#define			AT91_DDRSDRC_CAS_3	(3 << 4)
+#define			AT91_DDRSDRC_CAS_25	(6 << 4)
+#define		AT91_DDRSDRC_RST_DLL	(1 << 7)		/* Reset DLL */
+#define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
+#define		AT91_DDRSDRC_DIS_DLL	(1 << 9)		/* Disable DLL */
+#define		AT91_DDRSDRC_OCD	(1 << 12)		/* Off-Chip Driver */
+#define		AT91_DDRSDRC_DQMS	(1 << 16)		/* Mask Data is Shared */
+#define		AT91_DDRSDRC_ACTBST	(1 << 18)		/* Active Bank X to Burst Stop Read Access Bank Y */
+
+#define AT91_DDRSDRC_T0PR	0x0C	/* Timing 0 Register */
+#define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
+#define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
+#define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
+#define		AT91_DDRSDRC_TRC	(0xf << 12)		/* Row cycle delay */
+#define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
+#define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
+#define		AT91_DDRSDRC_TWTR	(0x7 << 24)		/* Internal Write to Read delay */
+#define		AT91_DDRSDRC_RED_WRRD	(0x1 << 27)		/* Reduce Write to Read Delay */
+#define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
+
+#define AT91_DDRSDRC_T1PR	0x10	/* Timing 1 Register */
+#define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
+#define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
+#define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
+#define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
+
+#define AT91_DDRSDRC_T2PR	0x14	/* Timing 2 Register */
+#define		AT91_DDRSDRC_TXARD	(0xf  << 0)		/* Exit active power down delay to read command in mode "Fast Exit" */
+#define		AT91_DDRSDRC_TXARDS	(0xf  << 4)		/* Exit active power down delay to read command in mode "Slow Exit" */
+#define		AT91_DDRSDRC_TRPA	(0xf  << 8)		/* Row Precharge All delay */
+#define		AT91_DDRSDRC_TRTP	(0x7  << 12)		/* Read to Precharge delay */
+
+#define AT91_DDRSDRC_LPR	0x1C	/* Low Power Register */
+#define		AT91_DDRSDRC_LPCB	(3 << 0)		/* Low-power Configurations */
+#define			AT91_DDRSDRC_LPCB_DISABLE		0
+#define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
+#define			AT91_DDRSDRC_LPCB_POWER_DOWN		2
+#define			AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN	3
+#define		AT91_DDRSDRC_CLKFR	(1 << 2)	/* Clock Frozen */
+#define		AT91_DDRSDRC_PASR	(7 << 4)	/* Partial Array Self Refresh */
+#define		AT91_DDRSDRC_TCSR	(3 << 8)	/* Temperature Compensated Self Refresh */
+#define		AT91_DDRSDRC_DS		(3 << 10)	/* Drive Strength */
+#define		AT91_DDRSDRC_TIMEOUT	(3 << 12)	/* Time to define when Low Power Mode is enabled */
+#define			AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
+#define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
+#define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
+#define		AT91_DDRSDRC_APDE	(1 << 16)	 /* Active power down exit time */
+#define		AT91_DDRSDRC_UPD_MR	(3 << 20)	 /* Update load mode register and extended mode register */
+
+#define AT91_DDRSDRC_MDR	0x20	/* Memory Device Register */
+#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
+#define			AT91_DDRSDRC_MD_SDR		0
+#define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
+#define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
+#define			AT91_DDRSDRC_MD_DDR2		6
+#define		AT91_DDRSDRC_DBW	(1 << 4)		/* Data Bus Width */
+#define			AT91_DDRSDRC_DBW_32BITS		(0 <<  4)
+#define			AT91_DDRSDRC_DBW_16BITS		(1 <<  4)
+
+#define AT91_DDRSDRC_DLL	0x24	/* DLL Information Register */
+#define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
+#define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
+#define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
+#define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
+
+#define AT91_DDRSDRC_HS		0x2C	/* High Speed Register */
+#define		AT91_DDRSDRC_DIS_ATCP_RD	(1 << 2)	/* Anticip read access is disabled */
+
+#define AT91_DDRSDRC_DELAY(n)	(0x30 + (0x4 * (n)))	/* Delay I/O Register n */
+
+#define AT91_DDRSDRC_WPMR	0xE4	/* Write Protect Mode Register */
+#define		AT91_DDRSDRC_WP		(1 << 0)		/* Write protect enable */
+#define		AT91_DDRSDRC_WPKEY	(0xffffff << 8)		/* Write protect key */
+#define		AT91_DDRSDRC_KEY	(0x444452 << 8)		/* Write protect key = "DDR" */
+
+#define AT91_DDRSDRC_WPSR	0xE8	/* Write Protect Status Register */
+#define		AT91_DDRSDRC_WPVS	(1 << 0)		/* Write protect violation status */
+#define		AT91_DDRSDRC_WPVSRC	(0xffff << 8)		/* Write protect violation source */
+
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+	at91_sys_read(AT91_DDRSDRC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+	at91_sys_write(AT91_DDRSDRC##num + reg, value)
+
+#endif

arch/arm/mach-at91/include/mach/at91sam9_sdramc.h

@@ -17,7 +17,7 @@
 #define AT91SAM9_SDRAMC_H
 
 /* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
+#define AT91_SDRAMC_MR		0x00	/* SDRAM Controller Mode Register */
 #define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
 #define			AT91_SDRAMC_MODE_NORMAL		0
 #define			AT91_SDRAMC_MODE_NOP		1
@@ -27,10 +27,10 @@
 #define			AT91_SDRAMC_MODE_EXT_LMR	5
 #define			AT91_SDRAMC_MODE_DEEP		6
 
-#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
+#define AT91_SDRAMC_TR		0x04	/* SDRAM Controller Refresh Timer Register */
 #define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
 
-#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
+#define AT91_SDRAMC_CR		0x08	/* SDRAM Controller Configuration Register */
 #define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
 #define			AT91_SDRAMC_NC_8	(0 << 0)
 #define			AT91_SDRAMC_NC_9	(1 << 0)
@@ -57,7 +57,7 @@
 #define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
 #define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
 
-#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
+#define AT91_SDRAMC_LPR		0x10	/* SDRAM Controller Low Power Register */
 #define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
 #define			AT91_SDRAMC_LPCB_DISABLE		0
 #define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
@@ -71,16 +71,21 @@
 #define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
 #define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
 
-#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
+#define AT91_SDRAMC_IER		0x14	/* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		0x18	/* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		0x1C	/* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		0x20	/* SDRAM Controller Interrupt Status Register */
 #define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
 
-#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
+#define AT91_SDRAMC_MDR		0x24	/* SDRAM Memory Device Register */
 #define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
 #define			AT91_SDRAMC_MD_SDRAM		0
 #define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
 
+/* Register access macros */
+#define at91_ramc_read(num, reg) \
+	at91_sys_read(AT91_SDRAMC##num + reg)
+#define at91_ramc_write(num, reg, value) \
+	at91_sys_write(AT91_SDRAMC##num + reg, value)
 
 #endif

arch/arm/mach-at91/include/mach/at91sam9rl.h

@@ -74,7 +74,7 @@
  */
 #define AT91_DMA	(0xffffe600 - AT91_BASE_SYS)
 #define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)

arch/arm/mach-at91/include/mach/board.h

@@ -44,6 +44,8 @@
  /* USB Device */
 struct at91_udc_data {
 	u8	vbus_pin;		/* high == host powering us */
+	u8	vbus_active_low;	/* vbus polarity */
+	u8	vbus_polled;		/* Use polling, not interrupt */
 	u8	pullup_pin;		/* active == D+ pulled up */
 	u8	pullup_active_low;	/* true == pullup_pin is active low */
 };

arch/arm/mach-at91/include/mach/cpu.h

@@ -52,6 +52,7 @@ static inline unsigned long at91_cpu_fully_identify(void)
 
 #define ARCH_EXID_AT91SAM9M11	0x00000001
 #define ARCH_EXID_AT91SAM9M10	0x00000002
+#define ARCH_EXID_AT91SAM9G46	0x00000003
 #define ARCH_EXID_AT91SAM9G45	0x00000004
 
 static inline unsigned long at91_exid_identify(void)
@@ -128,9 +129,18 @@ static inline unsigned long at91cap9_rev_identify(void)
 #ifdef CONFIG_ARCH_AT91SAM9G45
 #define cpu_is_at91sam9g45()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
 #define cpu_is_at91sam9g45es()	(at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES)
+#define cpu_is_at91sam9m10()    (cpu_is_at91sam9g45() && \
+                                (at91_exid_identify() == ARCH_EXID_AT91SAM9M10))
+#define cpu_is_at91sam9m46()    (cpu_is_at91sam9g45() && \
+                                (at91_exid_identify() == ARCH_EXID_AT91SAM9G46))
+#define cpu_is_at91sam9m11()    (cpu_is_at91sam9g45() && \
+                                (at91_exid_identify() == ARCH_EXID_AT91SAM9M11))
 #else
 #define cpu_is_at91sam9g45()	(0)
 #define cpu_is_at91sam9g45es()	(0)
+#define cpu_is_at91sam9m10()	(0)
+#define cpu_is_at91sam9g46()	(0)
+#define cpu_is_at91sam9m11()	(0)
 #endif
 
 #ifdef CONFIG_ARCH_AT91CAP9

arch/arm/mach-at91/include/mach/gpio.h

@@ -19,6 +19,7 @@
 #define PIN_BASE		NR_AIC_IRQS
 
 #define MAX_GPIO_BANKS		5
+#define NR_BUILTIN_GPIO		(PIN_BASE + (MAX_GPIO_BANKS * 32))
 
 /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
 

arch/arm/mach-at91/pm.h

@@ -30,14 +30,50 @@ static inline u32 sdram_selfrefresh_enable(void)
 {
 	u32 saved_lpr, lpr;
 
-	saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
+	saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR);
 
 	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-	at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
 	return saved_lpr;
 }
 
-#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr)
+
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9_ddrsdr.h>
+
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
+ */
+static u32 saved_lpr1;
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+	/* Those tow values allow us to delay self-refresh activation
+	 * to the maximum. */
+	u32 lpr0, lpr1;
+	u32 saved_lpr0;
+
+	saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
+	lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
+	lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
+	lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+	/* self-refresh mode now */
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
+	at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
+
+	return saved_lpr0;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr0)	\
+	do { \
+		at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0); \
+		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1); \
+	} while (0)
 
 #else
 #include <mach/at91sam9_sdramc.h>
@@ -47,7 +83,6 @@ static inline u32 sdram_selfrefresh_enable(void)
  * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
  * handle those cases both here and in the Suspend-To-RAM support.
  */
-#define	AT91_SDRAMC	AT91_SDRAMC0
 #warning Assuming EB1 SDRAM controller is *NOT* used
 #endif
 
@@ -55,13 +90,13 @@ static inline u32 sdram_selfrefresh_enable(void)
 {
 	u32 saved_lpr, lpr;
 
-	saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+	saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
 
 	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-	at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
+	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
 	return saved_lpr;
 }
 
-#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr)
 
 #endif

arch/arm/mach-at91/pm_slowclock.S

@@ -16,10 +16,12 @@
 #include <mach/hardware.h>
 #include <mach/at91_pmc.h>
 
-#ifdef CONFIG_ARCH_AT91RM9200
+#if defined(CONFIG_ARCH_AT91RM9200)
 #include <mach/at91rm9200_mc.h>
 #elif defined(CONFIG_ARCH_AT91CAP9)
 #include <mach/at91cap9_ddrsdr.h>
+#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#include <mach/at91sam9_ddrsdr.h>
 #else
 #include <mach/at91sam9_sdramc.h>
 #endif
@@ -30,7 +32,6 @@
  * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
  * handle those cases both here and in the Suspend-To-RAM support.
  */
-#define AT91_SDRAMC	AT91_SDRAMC0
 #warning Assuming EB1 SDRAM controller is *NOT* used
 #endif
 
@@ -113,12 +114,14 @@ ENTRY(at91_slow_clock)
 	/*
 	 * Register usage:
 	 *  R1 = Base address of AT91_PMC
-	 *  R2 = Base address of AT91_SDRAMC (or AT91_SYS on AT91RM9200)
+	 *  R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS)
 	 *  R3 = temporary register
 	 *  R4 = temporary register
+	 *  R5 = Base address of second RAM Controller or 0 if not present
 	 */
 	ldr	r1, .at91_va_base_pmc
 	ldr	r2, .at91_va_base_sdramc
+	ldr	r5, .at91_va_base_ramc1
 
 	/* Drain write buffer */
 	mcr	p15, 0, r0, c7, c10, 4
@@ -127,20 +130,33 @@ ENTRY(at91_slow_clock)
 	/* Put SDRAM in self-refresh mode */
 	mov	r3, #1
 	str	r3, [r2, #AT91_SDRAMC_SRR]
-#elif defined(CONFIG_ARCH_AT91CAP9)
-	/* Enable SDRAM self-refresh mode */
-	ldr	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
-	str	r3, .saved_sam9_lpr
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 
-	mov	r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
-	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+	/* prepare for DDRAM self-refresh mode */
+	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
+	str	r3, .saved_sam9_lpr
+	bic	r3, #AT91_DDRSDRC_LPCB
+	orr	r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+	/* figure out if we use the second ram controller */
+	cmp	r5, #0
+	ldrne	r4, [r5, #AT91_DDRSDRC_LPR]
+	strne	r4, .saved_sam9_lpr1
+	bicne	r4, #AT91_DDRSDRC_LPCB
+	orrne	r4, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+
+	/* Enable DDRAM self-refresh mode */
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
+	strne	r4, [r5, #AT91_DDRSDRC_LPR]
 #else
 	/* Enable SDRAM self-refresh mode */
-	ldr	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	ldr	r3, [r2, #AT91_SDRAMC_LPR]
 	str	r3, .saved_sam9_lpr
 
-	mov	r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
-	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	bic	r3, #AT91_SDRAMC_LPCB
+	orr	r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_SDRAMC_LPR]
 #endif
 
 	/* Save Master clock setting */
@@ -247,14 +263,21 @@ ENTRY(at91_slow_clock)
 
 #ifdef CONFIG_ARCH_AT91RM9200
 	/* Do nothing - self-refresh is automatically disabled. */
-#elif defined(CONFIG_ARCH_AT91CAP9)
-	/* Restore LPR on AT91CAP9 */
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
+	/* Restore LPR on AT91 with DDRAM */
 	ldr	r3, .saved_sam9_lpr
-	str	r3, [r2, #AT91_DDRSDRC_LPR - AT91_DDRSDRC]
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
+
+	/* if we use the second ram controller */
+	cmp	r5, #0
+	ldrne	r4, .saved_sam9_lpr1
+	strne	r4, [r5, #AT91_DDRSDRC_LPR]
+
 #else
-	/* Restore LPR on AT91SAM9 */
+	/* Restore LPR on AT91 with SDRAM */
 	ldr	r3, .saved_sam9_lpr
-	str	r3, [r2, #AT91_SDRAMC_LPR - AT91_SDRAMC]
+	str	r3, [r2, #AT91_SDRAMC_LPR]
 #endif
 
 	/* Restore registers, and return */
@@ -273,18 +296,29 @@ ENTRY(at91_slow_clock)
 .saved_sam9_lpr:
 	.word 0
 
+.saved_sam9_lpr1:
+	.word 0
+
 .at91_va_base_pmc:
 	.word AT91_VA_BASE_SYS + AT91_PMC
 
 #ifdef CONFIG_ARCH_AT91RM9200
 .at91_va_base_sdramc:
 	.word AT91_VA_BASE_SYS
-#elif defined(CONFIG_ARCH_AT91CAP9)
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 .at91_va_base_sdramc:
-	.word AT91_VA_BASE_SYS + AT91_DDRSDRC
+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC0
 #else
 .at91_va_base_sdramc:
-	.word AT91_VA_BASE_SYS + AT91_SDRAMC
+	.word AT91_VA_BASE_SYS + AT91_SDRAMC0
+#endif
+
+.at91_va_base_ramc1:
+#if defined(CONFIG_ARCH_AT91SAM9G45)
+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC1
+#else
+	.word 0
 #endif
 
 ENTRY(at91_slow_clock_sz)

arch/arm/mach-bcmring/core.c

@@ -91,14 +91,23 @@ static struct clk uart_clk = {
 	.parent = &pll1_clk,
 };
 
+static struct clk dummy_apb_pclk = {
+	.name = "BUSCLK",
+	.type = CLK_TYPE_PRIMARY,
+	.mode = CLK_MODE_XTAL,
+};
+
 static struct clk_lookup lookups[] = {
-	{			/* UART0 */
-	 .dev_id = "uarta",
-	 .clk = &uart_clk,
-	 }, {			/* UART1 */
-	     .dev_id = "uartb",
-	     .clk = &uart_clk,
-	     }
+	{			/* Bus clock */
+		.con_id = "apb_pclk",
+		.clk = &dummy_apb_pclk,
+	}, {			/* UART0 */
+		.dev_id = "uarta",
+		.clk = &uart_clk,
+	}, {			/* UART1 */
+		.dev_id = "uartb",
+		.clk = &uart_clk,
+	}
 };
 
 static struct amba_device *amba_devs[] __initdata = {

arch/arm/mach-clps711x/Kconfig

@@ -30,7 +30,6 @@ config ARCH_CLEP7312
 config ARCH_EDB7211
 	bool "EDB7211"
 	select ISA
-	select ARCH_DISCONTIGMEM_ENABLE
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_SELECT_MEMORY_MODEL
 	help

arch/arm/mach-clps711x/clep7312.c

@@ -32,7 +32,6 @@ fixup_clep7312(struct machine_desc *desc, struct tag *tags,
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xc0000000;
 	mi->bank[0].size = 0x01000000;
-	mi->bank[0].node = 0;
 }
 
 

arch/arm/mach-clps711x/edb7211-arch.c

@@ -18,6 +18,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 #include <linux/init.h>
+#include <linux/memblock.h>
 #include <linux/types.h>
 #include <linux/string.h>
 
@@ -29,6 +30,12 @@
 
 extern void edb7211_map_io(void);
 
+/* Reserve screen memory region at the start of main system memory. */
+static void __init edb7211_reserve(void)
+{
+	memblock_reserve(PHYS_OFFSET, 0x00020000);
+}
+
 static void __init
 fixup_edb7211(struct machine_desc *desc, struct tag *tags,
 	      char **cmdline, struct meminfo *mi)
@@ -43,10 +50,8 @@ fixup_edb7211(struct machine_desc *desc, struct tag *tags,
 	 */
 	mi->bank[0].start = 0xc0000000;
 	mi->bank[0].size = 8*1024*1024;
-	mi->bank[0].node = 0;
 	mi->bank[1].start = 0xc1000000;
 	mi->bank[1].size = 8*1024*1024;
-	mi->bank[1].node = 1;
 	mi->nr_banks = 2;
 }
 
@@ -57,6 +62,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.boot_params	= 0xc0020100,	/* 0xc0000000 - 0xc001ffff can be video RAM */
 	.fixup		= fixup_edb7211,
 	.map_io		= edb7211_map_io,
+	.reserve	= edb7211_reserve,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
 MACHINE_END

arch/arm/mach-clps711x/fortunet.c

@@ -39,7 +39,6 @@ struct meminfo memmap = {
 		{
 			.start	= 0xC0000000,
 			.size	= 0x01000000,
-			.node	= 0
 		},
 	},
 };

arch/arm/mach-clps711x/include/mach/memory.h

@@ -20,7 +20,6 @@
 #ifndef __ASM_ARCH_MEMORY_H
 #define __ASM_ARCH_MEMORY_H
 
-
 /*
  * Physical DRAM offset.
  */
@@ -72,7 +71,6 @@
  * 	node 2:  0xd0000000 - 0xd7ffffff
  * 	node 3:  0xd8000000 - 0xdfffffff
  */
-#define NODE_MEM_SIZE_BITS	24
 #define SECTION_SIZE_BITS	24
 #define MAX_PHYSMEM_BITS	32
 

arch/arm/mach-davinci/include/mach/memory.h

@@ -48,19 +48,16 @@
  * below 128M
  */
 static inline void
-__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+__arch_adjust_zones(unsigned long *size, unsigned long *holes)
 {
 	unsigned int sz = (128<<20) >> PAGE_SHIFT;
 
-	if (node != 0)
-		sz = 0;
-
 	size[1] = size[0] - sz;
 	size[0] = sz;
 }
 
-#define arch_adjust_zones(node, zone_size, holes) \
-        if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes)
+#define arch_adjust_zones(zone_size, holes) \
+        if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(zone_size, holes)
 
 #define ISA_DMA_THRESHOLD	(PHYS_OFFSET + (128<<20) - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + (128<<20))

arch/arm/mach-ep93xx/adssphere.c

@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 
@@ -21,26 +20,6 @@
 #include <asm/mach/arch.h>
 
 
-static struct physmap_flash_data adssphere_flash_data = {
-	.width		= 4,
-};
-
-static struct resource adssphere_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device adssphere_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &adssphere_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &adssphere_flash_resource,
-};
-
 static struct ep93xx_eth_data __initdata adssphere_eth_data = {
 	.phy_id		= 1,
 };
@@ -48,8 +27,7 @@ static struct ep93xx_eth_data __initdata adssphere_eth_data = {
 static void __init adssphere_init_machine(void)
 {
 	ep93xx_init_devices();
-	platform_device_register(&adssphere_flash);
-
+	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
 	ep93xx_register_eth(&adssphere_eth_data, 1);
 }
 

arch/arm/mach-ep93xx/clock.c

@@ -185,7 +185,7 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"pll1",		&clk_pll1),
 	INIT_CK(NULL,			"fclk",		&clk_f),
 	INIT_CK(NULL,			"hclk",		&clk_h),
-	INIT_CK(NULL,			"pclk",		&clk_p),
+	INIT_CK(NULL,			"apb_pclk",	&clk_p),
 	INIT_CK(NULL,			"pll2",		&clk_pll2),
 	INIT_CK("ep93xx-ohci",		NULL,		&clk_usb_host),
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),

arch/arm/mach-ep93xx/core.c

@@ -29,6 +29,7 @@
 #include <linux/termios.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
+#include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/spi/spi.h>
@@ -215,8 +216,8 @@ void ep93xx_devcfg_set_clear(unsigned int set_bits, unsigned int clear_bits)
 	spin_lock_irqsave(&syscon_swlock, flags);
 
 	val = __raw_readl(EP93XX_SYSCON_DEVCFG);
-	val |= set_bits;
 	val &= ~clear_bits;
+	val |= set_bits;
 	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
 	__raw_writel(val, EP93XX_SYSCON_DEVCFG);
 
@@ -347,6 +348,43 @@ static struct platform_device ep93xx_ohci_device = {
 };
 
 
+/*************************************************************************
+ * EP93xx physmap'ed flash
+ *************************************************************************/
+static struct physmap_flash_data ep93xx_flash_data;
+
+static struct resource ep93xx_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device ep93xx_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &ep93xx_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &ep93xx_flash_resource,
+};
+
+/**
+ * ep93xx_register_flash() - Register the external flash device.
+ * @width:	bank width in octets
+ * @start:	resource start address
+ * @size:	resource size
+ */
+void __init ep93xx_register_flash(unsigned int width,
+				  resource_size_t start, resource_size_t size)
+{
+	ep93xx_flash_data.width		= width;
+
+	ep93xx_flash_resource.start	= start;
+	ep93xx_flash_resource.end	= start + size - 1;
+
+	platform_device_register(&ep93xx_flash);
+}
+
+
 /*************************************************************************
  * EP93xx ethernet peripheral handling
  *************************************************************************/
@@ -620,6 +658,11 @@ static struct platform_device ep93xx_fb_device = {
 	.resource		= ep93xx_fb_resource,
 };
 
+static struct platform_device ep93xx_bl_device = {
+	.name		= "ep93xx-bl",
+	.id		= -1,
+};
+
 /**
  * ep93xx_register_fb - Register the framebuffer platform device.
  * @data:	platform specific framebuffer configuration (__initdata)
@@ -628,6 +671,7 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
 {
 	ep93xxfb_data = *data;
 	platform_device_register(&ep93xx_fb_device);
+	platform_device_register(&ep93xx_bl_device);
 }
 
 

arch/arm/mach-ep93xx/edb93xx.c

@@ -27,7 +27,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -38,39 +37,13 @@
 #include <asm/mach/arch.h>
 
 
-static struct physmap_flash_data edb93xx_flash_data;
-
-static struct resource edb93xx_flash_resource = {
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device edb93xx_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &edb93xx_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &edb93xx_flash_resource,
-};
-
-static void __init __edb93xx_register_flash(unsigned int width,
-			resource_size_t start, resource_size_t size)
-{
-	edb93xx_flash_data.width	= width;
-	edb93xx_flash_resource.start	= start;
-	edb93xx_flash_resource.end	= start + size - 1;
-
-	platform_device_register(&edb93xx_flash);
-}
-
 static void __init edb93xx_register_flash(void)
 {
 	if (machine_is_edb9307() || machine_is_edb9312() ||
 	    machine_is_edb9315()) {
-		__edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
+		ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
 	} else {
-		__edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
+		ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
 	}
 }
 

arch/arm/mach-ep93xx/gesbc9312.c

@@ -13,7 +13,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 
 #include <mach/hardware.h>
 
@@ -21,26 +20,6 @@
 #include <asm/mach/arch.h>
 
 
-static struct physmap_flash_data gesbc9312_flash_data = {
-	.width		= 4,
-};
-
-static struct resource gesbc9312_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gesbc9312_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &gesbc9312_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &gesbc9312_flash_resource,
-};
-
 static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
 	.phy_id		= 1,
 };
@@ -48,8 +27,7 @@ static struct ep93xx_eth_data __initdata gesbc9312_eth_data = {
 static void __init gesbc9312_init_machine(void)
 {
 	ep93xx_init_devices();
-	platform_device_register(&gesbc9312_flash);
-
+	ep93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_8M);
 	ep93xx_register_eth(&gesbc9312_eth_data, 0);
 }
 

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -43,6 +43,9 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 
 unsigned int ep93xx_chip_revision(void);
 
+void ep93xx_register_flash(unsigned int width,
+			   resource_size_t start, resource_size_t size);
+
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
 void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
 			 struct i2c_board_info *devices, int num);

arch/arm/mach-ep93xx/micro9.c

@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -31,31 +30,6 @@
  * Micro9-Lite uses a separate MTD map driver for flash support
  * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
  *************************************************************************/
-static struct physmap_flash_data micro9_flash_data;
-
-static struct resource micro9_flash_resource = {
-	.start		= EP93XX_CS1_PHYS_BASE,
-	.end		= EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device micro9_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= &micro9_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &micro9_flash_resource,
-};
-
-static void __init __micro9_register_flash(unsigned int width)
-{
-	micro9_flash_data.width = width;
-
-	platform_device_register(&micro9_flash);
-}
-
 static unsigned int __init micro9_detect_bootwidth(void)
 {
 	u32 v;
@@ -70,10 +44,17 @@ static unsigned int __init micro9_detect_bootwidth(void)
 
 static void __init micro9_register_flash(void)
 {
+	unsigned int width;
+
 	if (machine_is_micro9())
-		__micro9_register_flash(4);
+		width = 4;
 	else if (machine_is_micro9m() || machine_is_micro9s())
-		__micro9_register_flash(micro9_detect_bootwidth());
+		width = micro9_detect_bootwidth();
+	else
+		width = 0;
+
+	if (width)
+		ep93xx_register_flash(width, EP93XX_CS1_PHYS_BASE, SZ_64M);
 }
 
 

arch/arm/mach-ep93xx/simone.c

@@ -18,7 +18,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
 #include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
@@ -29,26 +28,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-static struct physmap_flash_data simone_flash_data = {
-	.width		= 2,
-};
-
-static struct resource simone_flash_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_8M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device simone_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.num_resources	= 1,
-	.resource	= &simone_flash_resource,
-	.dev = {
-		.platform_data	= &simone_flash_data,
-	},
-};
-
 static struct ep93xx_eth_data __initdata simone_eth_data = {
 	.phy_id		= 1,
 };
@@ -77,8 +56,7 @@ static struct i2c_board_info __initdata simone_i2c_board_info[] = {
 static void __init simone_init_machine(void)
 {
 	ep93xx_init_devices();
-
-	platform_device_register(&simone_flash);
+	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_8M);
 	ep93xx_register_eth(&simone_eth_data, 1);
 	ep93xx_register_fb(&simone_fb_info);
 	ep93xx_register_i2c(&simone_i2c_gpio_data, simone_i2c_board_info,

arch/arm/mach-ep93xx/ts72xx.c

@@ -17,7 +17,6 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/m48t86.h>
-#include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
@@ -173,31 +172,13 @@ static struct platform_device ts72xx_nand_flash = {
 };
 
 
-/*************************************************************************
- * NOR flash (TS-7200 only)
- *************************************************************************/
-static struct physmap_flash_data ts72xx_nor_data = {
-	.width		= 2,
-};
-
-static struct resource ts72xx_nor_resource = {
-	.start		= EP93XX_CS6_PHYS_BASE,
-	.end		= EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device ts72xx_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= 0,
-	.dev.platform_data	= &ts72xx_nor_data,
-	.resource		= &ts72xx_nor_resource,
-	.num_resources		= 1,
-};
-
 static void __init ts72xx_register_flash(void)
 {
+	/*
+	 * TS7200 has NOR flash all other TS72xx board have NAND flash.
+	 */
 	if (board_is_ts7200()) {
-		platform_device_register(&ts72xx_nor_flash);
+		ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
 	} else {
 		resource_size_t start;
 

arch/arm/mach-integrator/common.h

@@ -0,0 +1 @@
+void integrator_reserve(void);

arch/arm/mach-integrator/core.c

@@ -14,6 +14,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/memblock.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/termios.h>
@@ -30,6 +31,7 @@
 #include <asm/system.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
+#include <asm/pgtable.h>
 
 static struct amba_pl010_data integrator_uart_data;
 
@@ -119,8 +121,13 @@ static struct clk uartclk = {
 	.rate	= 14745600,
 };
 
+static struct clk dummy_apb_pclk;
+
 static struct clk_lookup lookups[] = {
-	{	/* UART0 */
+	{	/* Bus clock */
+		.con_id		= "apb_pclk",
+		.clk		= &dummy_apb_pclk,
+	}, {	/* UART0 */
 		.dev_id		= "mb:16",
 		.clk		= &uartclk,
 	}, {	/* UART1 */
@@ -215,3 +222,13 @@ void cm_control(u32 mask, u32 set)
 }
 
 EXPORT_SYMBOL(cm_control);
+
+/*
+ * We need to stop things allocating the low memory; ideally we need a
+ * better implementation of GFP_DMA which does not assume that DMA-able
+ * memory starts at zero.
+ */
+void __init integrator_reserve(void)
+{
+	memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
+}

arch/arm/mach-integrator/integrator_ap.c

@@ -48,6 +48,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
+#include "common.h"
+
 /* 
  * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx
  * is the (PA >> 12).
@@ -502,6 +504,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator")
 	.io_pg_offst	= ((0xf1600000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= ap_map_io,
+	.reserve	= integrator_reserve,
 	.init_irq	= ap_init_irq,
 	.timer		= &ap_timer,
 	.init_machine	= ap_init,

arch/arm/mach-integrator/integrator_cp.c

@@ -43,6 +43,8 @@
 
 #include <plat/timer-sp.h>
 
+#include "common.h"
+
 #define INTCP_PA_FLASH_BASE		0x24000000
 #define INTCP_FLASH_SIZE		SZ_32M
 
@@ -601,6 +603,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
 	.io_pg_offst	= ((0xf1600000) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
 	.map_io		= intcp_map_io,
+	.reserve	= integrator_reserve,
 	.init_irq	= intcp_init_irq,
 	.timer		= &cp_timer,
 	.init_machine	= intcp_init,

arch/arm/mach-iop13xx/include/mach/memory.h

@@ -69,6 +69,4 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x)
 #endif /* CONFIG_ARCH_IOP13XX */
 #endif /* !ASSEMBLY */
 
-#define PFN_TO_NID(addr)	(0)
-
 #endif

arch/arm/mach-ixp4xx/common-pci.c

@@ -348,7 +348,7 @@ int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
  * This is really ugly and we need a better way of specifying
  * DMA-capable regions of memory.
  */
-void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
+void __init ixp4xx_adjust_zones(unsigned long *zone_size,
 	unsigned long *zhole_size)
 {
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
@@ -356,7 +356,7 @@ void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
 	/*
 	 * Only adjust if > 64M on current system
 	 */
-	if (node || (zone_size[0] <= sz))
+	if (zone_size[0] <= sz)
 		return;
 
 	zone_size[1] = zone_size[0] - sz;

arch/arm/mach-ixp4xx/include/mach/memory.h

@@ -16,10 +16,10 @@
 
 #if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
 
-void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+void ixp4xx_adjust_zones(unsigned long *size, unsigned long *holes);
 
-#define arch_adjust_zones(node, size, holes) \
-	ixp4xx_adjust_zones(node, size, holes)
+#define arch_adjust_zones(size, holes) \
+	ixp4xx_adjust_zones(size, holes)
 
 #define ISA_DMA_THRESHOLD (SZ_64M - 1)
 #define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)

arch/arm/mach-lh7a40x/include/mach/memory.h

@@ -19,50 +19,6 @@
  */
 #define PHYS_OFFSET	UL(0xc0000000)
 
-#ifdef CONFIG_DISCONTIGMEM
-
-/*
- * Given a kernel address, find the home node of the underlying memory.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define KVADDR_TO_NID(addr) \
-  (  ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) &  1)\
-   | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1))
-# else  /* 2 banks per node */
-#  define KVADDR_TO_NID(addr) \
-      (((unsigned long) (addr) - PAGE_OFFSET) >> 26)
-# endif
-
-/*
- * Given a page frame number, convert it to a node id.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define PFN_TO_NID(pfn) \
-  (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) &  1)\
- | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1))
-# else  /* 2 banks per node */
-#  define PFN_TO_NID(pfn) \
-    (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
-#endif
-
-/*
- * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
- * and returns the index corresponding to the appropriate page in the
- * node's mem_map.
- */
-
-# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
-#  define LOCAL_MAP_NR(addr) \
-       (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT)
-# else  /* 2 banks per node */
-#  define LOCAL_MAP_NR(addr) \
-       (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
-# endif
-
-#endif
-
 /*
  * Sparsemem version of the above
  */

arch/arm/mach-msm/board-trout.c

@@ -50,7 +50,6 @@ static void __init trout_fixup(struct machine_desc *desc, struct tag *tags,
 {
 	mi->nr_banks = 1;
 	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
 	mi->bank[0].size = (101*1024*1024);
 }
 

arch/arm/mach-nomadik/clock.c

@@ -53,6 +53,10 @@ static struct clk clk_default;
 	}
 
 static struct clk_lookup lookups[] = {
+	{
+		.con_id		= "apb_pclk",
+		.clk		= &clk_default,
+	},
 	CLK(&clk_24, "mtu0"),
 	CLK(&clk_24, "mtu1"),
 	CLK(&clk_48, "uart0"),

arch/arm/mach-omap1/board-ams-delta.c

@@ -301,6 +301,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= ams_delta_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= ams_delta_init_irq,
 	.init_machine	= ams_delta_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap1/board-fsample.c

@@ -378,6 +378,7 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_fsample_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_fsample_init_irq,
 	.init_machine	= omap_fsample_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap1/board-generic.c

@@ -98,6 +98,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_generic_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_generic_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap1/board-h2.c

@@ -467,6 +467,7 @@ MACHINE_START(OMAP_H2, "TI-H2")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= h2_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= h2_init_irq,
 	.init_machine	= h2_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap1/board-h3.c

@@ -437,6 +437,7 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= h3_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= h3_init_irq,
 	.init_machine	= h3_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap1/board-htcherald.c

@@ -304,6 +304,7 @@ MACHINE_START(HERALD, "HTC Herald")
 	.io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params    = 0x10000100,
 	.map_io         = htcherald_map_io,
+	.reserve	= omap_reserve,
 	.init_irq       = htcherald_init_irq,
 	.init_machine   = htcherald_init,
 	.timer          = &omap_timer,

arch/arm/mach-omap1/board-innovator.c

@@ -463,6 +463,7 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= innovator_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= innovator_init_irq,
 	.init_machine	= innovator_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap1/board-nokia770.c

@@ -400,6 +400,7 @@ MACHINE_START(NOKIA770, "Nokia 770")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_nokia770_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_nokia770_init_irq,
 	.init_machine	= omap_nokia770_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap1/board-osk.c

@@ -584,6 +584,7 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= osk_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= osk_init_irq,
 	.init_machine	= osk_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap1/board-palmte.c

@@ -373,6 +373,7 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_palmte_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_palmte_init_irq,
 	.init_machine	= omap_palmte_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap1/board-palmtt.c

@@ -321,6 +321,7 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_palmtt_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_palmtt_init_irq,
 	.init_machine	= omap_palmtt_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap1/board-palmz71.c

@@ -338,10 +338,12 @@ omap_palmz71_map_io(void)
 }
 
 MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
-	.phys_io = 0xfff00000,
-	.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
-	.boot_params = 0x10000100,.map_io = omap_palmz71_map_io,
-	.init_irq = omap_palmz71_init_irq,
-	.init_machine = omap_palmz71_init,
-	.timer = &omap_timer,
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_palmz71_map_io,
+	.reserve	= omap_reserve,
+	.init_irq	= omap_palmz71_init_irq,
+	.init_machine	= omap_palmz71_init,
+	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap1/board-perseus2.c

@@ -339,6 +339,7 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_perseus2_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_perseus2_init_irq,
 	.init_machine	= omap_perseus2_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap1/board-sx1.c

@@ -423,7 +423,8 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= omap_sx1_map_io,
-	.init_irq		= omap_sx1_init_irq,
+	.reserve	= omap_reserve,
+	.init_irq	= omap_sx1_init_irq,
 	.init_machine	= omap_sx1_init,
 	.timer		= &omap_timer,
 MACHINE_END

arch/arm/mach-omap1/board-voiceblue.c

@@ -287,6 +287,7 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,
 	.map_io		= voiceblue_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= voiceblue_init_irq,
 	.init_machine	= voiceblue_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap1/io.c

@@ -22,7 +22,6 @@
 
 extern void omap_check_revision(void);
 extern void omap_sram_init(void);
-extern void omapfb_reserve_sdram(void);
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -122,7 +121,6 @@ void __init omap1_map_common_io(void)
 #endif
 
 	omap_sram_init();
-	omapfb_reserve_sdram();
 }
 
 /*

arch/arm/mach-omap2/board-2430sdp.c

@@ -248,6 +248,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_2430sdp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_2430sdp_init_irq,
 	.init_machine	= omap_2430sdp_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-3430sdp.c

@@ -815,6 +815,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_3430sdp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_3430sdp_init_irq,
 	.init_machine	= omap_3430sdp_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-3630sdp.c

@@ -108,6 +108,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_sdp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_sdp_init_irq,
 	.init_machine	= omap_sdp_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-4430sdp.c

@@ -402,6 +402,7 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_4430sdp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_4430sdp_init_irq,
 	.init_machine	= omap_4430sdp_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-am3517evm.c

@@ -472,6 +472,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= am3517_evm_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= am3517_evm_init_irq,
 	.init_machine	= am3517_evm_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-apollon.c

@@ -346,6 +346,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_apollon_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_apollon_init_irq,
 	.init_machine	= omap_apollon_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-cm-t35.c

@@ -837,6 +837,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= cm_t35_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= cm_t35_init_irq,
 	.init_machine	= cm_t35_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-devkit8000.c

@@ -825,6 +825,7 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
 	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= devkit8000_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= devkit8000_init_irq,
 	.init_machine	= devkit8000_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-generic.c

@@ -59,6 +59,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_generic_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_generic_init_irq,
 	.init_machine	= omap_generic_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-h4.c

@@ -378,6 +378,7 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_h4_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_h4_init_irq,
 	.init_machine	= omap_h4_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-igep0020.c

@@ -543,6 +543,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= igep2_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= igep2_init_irq,
 	.init_machine	= igep2_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-ldp.c

@@ -417,6 +417,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_ldp_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap_ldp_init_irq,
 	.init_machine	= omap_ldp_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-n8x0.c

@@ -667,6 +667,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= n8x0_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
@@ -677,6 +678,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= n8x0_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,
@@ -687,6 +689,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= n8x0_init_irq,
 	.init_machine	= n8x0_init_machine,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-omap3beagle.c

@@ -519,6 +519,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_beagle_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap3_beagle_init_irq,
 	.init_machine	= omap3_beagle_init,
 	.timer		= &omap_timer,

arch/arm/mach-omap2/board-omap3evm.c

@@ -727,6 +727,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_evm_map_io,
+	.reserve	= omap_reserve,
 	.init_irq	= omap3_evm_init_irq,
 	.init_machine	= omap3_evm_init,
 	.timer		= &omap_timer,