Merge upstream into ieee80211.

Hand-fix merge conflict in drivers/usb/net/zd1201.c.

CREDITS

@@ -2423,8 +2423,7 @@ S: Toronto, Ontario
 S: Canada
 
 N: Zwane Mwaikambo
-E: zwane@linuxpower.ca
-W: http://function.linuxpower.ca
+E: zwane@arm.linux.org.uk
 D: Various driver hacking
 D: Lowlevel x86 kernel hacking
 D: General debugging

Documentation/acpi-hotkey.txt

@@ -33,3 +33,6 @@ The result of the execution of this aml method is
 attached to /proc/acpi/hotkey/poll_method, which is dnyamically
 created.  Please use command "cat /proc/acpi/hotkey/polling_method" 
 to retrieve it.
+
+Note: Use cmdline "acpi_generic_hotkey" to over-ride
+loading any platform specific drivers.

Documentation/kernel-parameters.txt

@@ -159,6 +159,11 @@ running once the system is up.
 
 	acpi_fake_ecdt	[HW,ACPI] Workaround failure due to BIOS lacking ECDT
 
+	acpi_generic_hotkey [HW,ACPI]
+			Allow consolidated generic hotkey driver to
+			over-ride platform specific driver.
+			See also Documentation/acpi-hotkey.txt.
+
 	ad1816=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>
 			See also Documentation/sound/oss/AD1816.

Documentation/pci.txt

@@ -266,20 +266,6 @@ port an old driver to the new PCI interface.  They are no longer present
 in the kernel as they aren't compatible with hotplug or PCI domains or
 having sane locking.
 
-pcibios_present() and		Since ages, you don't need to test presence
-pci_present()			of PCI subsystem when trying to talk to it.
-				If it's not there, the list of PCI devices
-				is empty and all functions for searching for
-				devices just return NULL.
-pcibios_(read|write)_*		Superseded by their pci_(read|write)_*
-				counterparts.
-pcibios_find_*			Superseded by their pci_get_* counterparts.
-pci_for_each_dev()		Superseded by pci_get_device()
-pci_for_each_dev_reverse()	Superseded by pci_find_device_reverse()
-pci_for_each_bus()		Superseded by pci_find_next_bus()
 pci_find_device()		Superseded by pci_get_device()
 pci_find_subsys()		Superseded by pci_get_subsys()
 pci_find_slot()			Superseded by pci_get_slot()
-pcibios_find_class()		Superseded by pci_get_class()
-pci_find_class()		Superseded by pci_get_class()
-pci_(read|write)_*_nodev()	Superseded by pci_bus_(read|write)_*()

MAINTAINERS

@@ -1739,7 +1739,7 @@ S:	Maintained
 
 OPL3-SA2, SA3, and SAx DRIVER
 P:	Zwane Mwaikambo
-M:	zwane@commfireservices.com
+M:	zwane@arm.linux.org.uk
 L:	linux-sound@vger.kernel.org
 S:	Maintained
 
@@ -1825,6 +1825,12 @@ P:	Greg Kroah-Hartman
 M:	greg@kroah.com
 S:	Maintained
 
+PCIE HOTPLUG DRIVER
+P:	Kristen Carlson Accardi
+M:	kristen.c.accardi@intel.com
+L:	pcihpd-discuss@lists.sourceforge.net
+S:	Maintained
+
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	http://lists.infradead.org/mailman/listinfo/linux-pcmcia
@@ -1989,7 +1995,7 @@ S:	Maintained
 
 SC1200 WDT DRIVER
 P:	Zwane Mwaikambo
-M:	zwane@commfireservices.com
+M:	zwane@arm.linux.org.uk
 S:	Maintained
 
 SCHEDULER
@@ -2201,6 +2207,12 @@ W:	http://projects.buici.com/arm
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 S:	Maintained
 
+SHPC HOTPLUG DRIVER
+P:	Kristen Carlson Accardi
+M:	kristen.c.accardi@intel.com
+L:	pcihpd-discuss@lists.sourceforge.net
+S:	Maintained
+
 SPARC (sparc32):
 P:	William L. Irwin
 M:	wli@holomorphy.com

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 13
-EXTRAVERSION =-rc6
+EXTRAVERSION =-rc7
 NAME=Woozy Numbat
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -522,7 +522,7 @@ source "mm/Kconfig"
 
 config NUMA
 	bool "NUMA Support (EXPERIMENTAL)"
-	depends on DISCONTIGMEM
+	depends on DISCONTIGMEM && BROKEN
 	help
 	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
 	  Access).  This option is for configuring high-end multiprocessor

arch/alpha/kernel/smp.c

@@ -1036,7 +1036,7 @@ debug_spin_lock(spinlock_t * lock, const char *base_file, int line_no)
 	"	br	1b\n"
 	".previous"
 	: "=r" (tmp), "=m" (lock->lock), "=r" (stuck)
-	: "1" (lock->lock), "2" (stuck) : "memory");
+	: "m" (lock->lock), "2" (stuck) : "memory");
 
 	if (stuck < 0) {
 		printk(KERN_WARNING
@@ -1115,7 +1115,7 @@ void _raw_write_lock(rwlock_t * lock)
 	".previous"
 	: "=m" (*(volatile int *)lock), "=&r" (regx), "=&r" (regy),
 	  "=&r" (stuck_lock), "=&r" (stuck_reader)
-	: "0" (*(volatile int *)lock), "3" (stuck_lock), "4" (stuck_reader) : "memory");
+	: "m" (*(volatile int *)lock), "3" (stuck_lock), "4" (stuck_reader) : "memory");
 
 	if (stuck_lock < 0) {
 		printk(KERN_WARNING "write_lock stuck at %p\n", inline_pc);
@@ -1153,7 +1153,7 @@ void _raw_read_lock(rwlock_t * lock)
 	"	br	1b\n"
 	".previous"
 	: "=m" (*(volatile int *)lock), "=&r" (regx), "=&r" (stuck_lock)
-	: "0" (*(volatile int *)lock), "2" (stuck_lock) : "memory");
+	: "m" (*(volatile int *)lock), "2" (stuck_lock) : "memory");
 
 	if (stuck_lock < 0) {
 		printk(KERN_WARNING "read_lock stuck at %p\n", inline_pc);

arch/alpha/oprofile/common.c

@@ -65,7 +65,7 @@ op_axp_setup(void)
 	model->reg_setup(&reg, ctr, &sys);
 
 	/* Configure the registers on all cpus.  */
-	smp_call_function(model->cpu_setup, &reg, 0, 1);
+	(void)smp_call_function(model->cpu_setup, &reg, 0, 1);
 	model->cpu_setup(&reg);
 	return 0;
 }
@@ -86,7 +86,7 @@ op_axp_cpu_start(void *dummy)
 static int
 op_axp_start(void)
 {
-	smp_call_function(op_axp_cpu_start, NULL, 0, 1);
+	(void)smp_call_function(op_axp_cpu_start, NULL, 0, 1);
 	op_axp_cpu_start(NULL);
 	return 0;
 }
@@ -101,7 +101,7 @@ op_axp_cpu_stop(void *dummy)
 static void
 op_axp_stop(void)
 {
-	smp_call_function(op_axp_cpu_stop, NULL, 0, 1);
+	(void)smp_call_function(op_axp_cpu_stop, NULL, 0, 1);
 	op_axp_cpu_stop(NULL);
 }
 

arch/arm/Kconfig

@@ -310,7 +310,7 @@ menu "Kernel Features"
 
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL #&& n
+	depends on EXPERIMENTAL && BROKEN #&& n
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If

arch/arm/kernel/calls.S

@@ -327,6 +327,12 @@ __syscall_start:
 /* 310 */	.long	sys_request_key
 		.long	sys_keyctl
 		.long	sys_semtimedop
+/* vserver */	.long	sys_ni_syscall
+		.long	sys_ioprio_set
+/* 315 */	.long	sys_ioprio_get
+		.long	sys_inotify_init
+		.long	sys_inotify_add_watch
+		.long	sys_inotify_rm_watch
 __syscall_end:
 
 		.rept	NR_syscalls - (__syscall_end - __syscall_start) / 4

arch/arm/kernel/traps.c

@@ -617,7 +617,7 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs)
 	notify_die("unknown data abort code", regs, &info, instr, 0);
 }
 
-volatile void __bug(const char *file, int line, void *data)
+void __attribute__((noreturn)) __bug(const char *file, int line, void *data)
 {
 	printk(KERN_CRIT"kernel BUG at %s:%d!", file, line);
 	if (data)

arch/arm/mach-s3c2410/s3c2410.c

@@ -18,6 +18,7 @@
  *     28-Sep-2004 BJD  Updates for new serial port bits
  *     04-Nov-2004 BJD  Updated UART configuration process
  *     10-Jan-2005 BJD  Removed s3c2410_clock_tick_rate
+ *     13-Aug-2005 DA   Removed UART from initial I/O mappings
 */
 
 #include <linux/kernel.h>
@@ -49,10 +50,9 @@ static struct map_desc s3c2410_iodesc[] __initdata = {
 	IODESC_ENT(USBHOST),
 	IODESC_ENT(CLKPWR),
 	IODESC_ENT(LCD),
-	IODESC_ENT(UART),
 	IODESC_ENT(TIMER),
 	IODESC_ENT(ADC),
-	IODESC_ENT(WATCHDOG)
+	IODESC_ENT(WATCHDOG),
 };
 
 static struct resource s3c_uart0_resource[] = {

arch/arm/mm/Kconfig

@@ -384,7 +384,7 @@ config CPU_DCACHE_DISABLE
 
 config CPU_DCACHE_WRITETHROUGH
 	bool "Force write through D-cache"
-	depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DISABLE_DCACHE
+	depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DCACHE_DISABLE
 	default y if CPU_ARM925T
 	help
 	  Say Y here to use the data cache in writethrough mode. Unless you

arch/arm/mm/proc-v6.S

@@ -105,7 +105,7 @@ ENTRY(cpu_v6_dcache_clean_area)
 ENTRY(cpu_v6_switch_mm)
 	mov	r2, #0
 	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
-	mcr     p15, 0, r2, c7, c5, 6           @ flush BTAC/BTB
+	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
 	mcr	p15, 0, r2, c7, c10, 4		@ drain write buffer
 	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
 	mcr	p15, 0, r1, c13, c0, 1		@ set context ID

arch/arm/nwfpe/fpopcode.h

@@ -370,20 +370,20 @@ TABLE 5
 #define getRoundingMode(opcode)		((opcode & MASK_ROUNDING_MODE) >> 5)
 
 #ifdef CONFIG_FPE_NWFPE_XP
-static inline const floatx80 getExtendedConstant(const unsigned int nIndex)
+static inline __attribute_pure__ floatx80 getExtendedConstant(const unsigned int nIndex)
 {
 	extern const floatx80 floatx80Constant[];
 	return floatx80Constant[nIndex];
 }
 #endif
 
-static inline const float64 getDoubleConstant(const unsigned int nIndex)
+static inline __attribute_pure__ float64 getDoubleConstant(const unsigned int nIndex)
 {
 	extern const float64 float64Constant[];
 	return float64Constant[nIndex];
 }
 
-static inline const float32 getSingleConstant(const unsigned int nIndex)
+static inline __attribute_pure__ float32 getSingleConstant(const unsigned int nIndex)
 {
 	extern const float32 float32Constant[];
 	return float32Constant[nIndex];

arch/arm/nwfpe/softfloat.c

@@ -1602,9 +1602,7 @@ flag float32_le_quiet( float32 a, float32 b )
     if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
          || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
        ) {
-        if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
-        }
+        /* Do nothing, even if NaN as we're quiet */
         return 0;
     }
     aSign = extractFloat32Sign( a );
@@ -1629,9 +1627,7 @@ flag float32_lt_quiet( float32 a, float32 b )
     if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
          || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
        ) {
-        if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
-        }
+        /* Do nothing, even if NaN as we're quiet */
         return 0;
     }
     aSign = extractFloat32Sign( a );
@@ -2493,9 +2489,7 @@ flag float64_le_quiet( float64 a, float64 b )
     if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
          || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
        ) {
-        if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
-        }
+        /* Do nothing, even if NaN as we're quiet */
         return 0;
     }
     aSign = extractFloat64Sign( a );
@@ -2520,9 +2514,7 @@ flag float64_lt_quiet( float64 a, float64 b )
     if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
          || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
        ) {
-        if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
-        }
+        /* Do nothing, even if NaN as we're quiet */
         return 0;
     }
     aSign = extractFloat64Sign( a );
@@ -3256,7 +3248,7 @@ flag floatx80_eq( floatx80 a, floatx80 b )
        ) {
         if (    floatx80_is_signaling_nan( a )
              || floatx80_is_signaling_nan( b ) ) {
-            roundData->exception |= float_flag_invalid;
+            float_raise( float_flag_invalid );
         }
         return 0;
     }
@@ -3286,7 +3278,7 @@ flag floatx80_le( floatx80 a, floatx80 b )
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        roundData->exception |= float_flag_invalid;
+        float_raise( float_flag_invalid );
         return 0;
     }
     aSign = extractFloatx80Sign( a );
@@ -3320,7 +3312,7 @@ flag floatx80_lt( floatx80 a, floatx80 b )
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        roundData->exception |= float_flag_invalid;
+        float_raise( float_flag_invalid );
         return 0;
     }
     aSign = extractFloatx80Sign( a );
@@ -3353,7 +3345,7 @@ flag floatx80_eq_signaling( floatx80 a, floatx80 b )
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        roundData->exception |= float_flag_invalid;
+        float_raise( float_flag_invalid );
         return 0;
     }
     return
@@ -3382,10 +3374,7 @@ flag floatx80_le_quiet( floatx80 a, floatx80 b )
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        if (    floatx80_is_signaling_nan( a )
-             || floatx80_is_signaling_nan( b ) ) {
-            roundData->exception |= float_flag_invalid;
-        }
+        /* Do nothing, even if NaN as we're quiet */
         return 0;
     }
     aSign = extractFloatx80Sign( a );
@@ -3419,10 +3408,7 @@ flag floatx80_lt_quiet( floatx80 a, floatx80 b )
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        if (    floatx80_is_signaling_nan( a )
-             || floatx80_is_signaling_nan( b ) ) {
-            roundData->exception |= float_flag_invalid;
-        }
+        /* Do nothing, even if NaN as we're quiet */
         return 0;
     }
     aSign = extractFloatx80Sign( a );

arch/i386/kernel/apic.c

@@ -726,15 +726,11 @@ __setup("apic=", apic_set_verbosity);
 static int __init detect_init_APIC (void)
 {
 	u32 h, l, features;
-	extern void get_cpu_vendor(struct cpuinfo_x86*);
 
 	/* Disabled by kernel option? */
 	if (enable_local_apic < 0)
 		return -1;
 
-	/* Workaround for us being called before identify_cpu(). */
-	get_cpu_vendor(&boot_cpu_data);
-
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
 		if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||

arch/i386/kernel/nmi.c

@@ -195,7 +195,7 @@ static void disable_lapic_nmi_watchdog(void)
 			wrmsr(MSR_P6_EVNTSEL0, 0, 0);
 			break;
 		case 15:
-			if (boot_cpu_data.x86_model > 0x3)
+			if (boot_cpu_data.x86_model > 0x4)
 				break;
 
 			wrmsr(MSR_P4_IQ_CCCR0, 0, 0);
@@ -432,7 +432,7 @@ void setup_apic_nmi_watchdog (void)
 			setup_p6_watchdog();
 			break;
 		case 15:
-			if (boot_cpu_data.x86_model > 0x3)
+			if (boot_cpu_data.x86_model > 0x4)
 				return;
 
 			if (!setup_p4_watchdog())

arch/i386/kernel/traps.c

@@ -803,15 +803,17 @@ void math_error(void __user *eip)
 	 */
 	cwd = get_fpu_cwd(task);
 	swd = get_fpu_swd(task);
-	switch (((~cwd) & swd & 0x3f) | (swd & 0x240)) {
+	switch (swd & ~cwd & 0x3f) {
 		case 0x000:
 		default:
 			break;
 		case 0x001: /* Invalid Op */
-		case 0x041: /* Stack Fault */
-		case 0x241: /* Stack Fault | Direction */
+			/*
+			 * swd & 0x240 == 0x040: Stack Underflow
+			 * swd & 0x240 == 0x240: Stack Overflow
+			 * User must clear the SF bit (0x40) if set
+			 */
 			info.si_code = FPE_FLTINV;
-			/* Should we clear the SF or let user space do it ???? */
 			break;
 		case 0x002: /* Denormalize */
 		case 0x010: /* Underflow */

arch/ia64/Kconfig

@@ -392,15 +392,8 @@ menu "Bus options (PCI, PCMCIA)"
 config PCI
 	bool "PCI support"
 	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
-	  The PCI-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, contains valuable
-	  information about which PCI hardware does work under Linux and which
-	  doesn't.
+	  Real IA-64 machines all have PCI/PCI-X/PCI Express busses.  Say Y
+	  here unless you are using a simulator without PCI support.
 
 config PCI_DOMAINS
 	bool

arch/ia64/configs/sn2_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10
-# Mon Jan 10 13:57:35 2005
+# Linux kernel version: 2.6.13-rc6
+# Tue Aug 16 14:40:41 2005
 #
 
 #
@@ -10,6 +10,7 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -21,24 +22,26 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=20
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_CPUSETS=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CPUSETS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -63,9 +66,12 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_IA64_UNCACHED_ALLOCATOR=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
 CONFIG_IA64_SGI_SN2=y
 # CONFIG_IA64_HP_SIM is not set
 # CONFIG_ITANIUM is not set
@@ -74,6 +80,10 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
 CONFIG_NUMA=y
 CONFIG_VIRTUAL_MEM_MAP=y
@@ -81,11 +91,20 @@ CONFIG_HOLES_IN_ZONE=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 # CONFIG_IA64_CYCLONE is not set
 CONFIG_IOSAPIC=y
+CONFIG_IA64_SGI_SN_XP=m
 CONFIG_FORCE_MAX_ZONEORDER=18
 CONFIG_SMP=y
 CONFIG_NR_CPUS=512
 # CONFIG_HOTPLUG_CPU is not set
+CONFIG_SCHED_SMT=y
 CONFIG_PREEMPT=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
@@ -105,6 +124,7 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management and ACPI
 #
+CONFIG_PM=y
 CONFIG_ACPI=y
 
 #
@@ -114,6 +134,7 @@ CONFIG_ACPI_BOOT=y
 CONFIG_ACPI_INTERPRETER=y
 # CONFIG_ACPI_BUTTON is not set
 CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_HOTKEY=m
 # CONFIG_ACPI_FAN is not set
 # CONFIG_ACPI_PROCESSOR is not set
 CONFIG_ACPI_NUMA=y
@@ -133,6 +154,7 @@ CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCI Hotplug Support
@@ -141,7 +163,6 @@ CONFIG_HOTPLUG_PCI=y
 # CONFIG_HOTPLUG_PCI_FAKE is not set
 # CONFIG_HOTPLUG_PCI_ACPI is not set
 # CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 CONFIG_HOTPLUG_PCI_SGI=y
 
@@ -151,8 +172,70 @@ CONFIG_HOTPLUG_PCI_SGI=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
 #
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
 
 #
 # Device Drivers
@@ -163,7 +246,7 @@ CONFIG_HOTPLUG_PCI_SGI=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
@@ -188,6 +271,7 @@ CONFIG_FW_LOADER=m
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
@@ -252,6 +336,7 @@ CONFIG_IDEDMA_PCI_AUTO=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -282,6 +367,7 @@ CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -315,24 +401,20 @@ CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_ATA_PIIX is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
 # CONFIG_SCSI_SATA_SIS is not set
 # CONFIG_SCSI_SATA_ULI is not set
 # CONFIG_SCSI_SATA_VIA is not set
 CONFIG_SCSI_SATA_VITESSE=y
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_QLOGIC_1280_1040 is not set
@@ -342,6 +424,8 @@ CONFIG_SCSI_QLA22XX=y
 CONFIG_SCSI_QLA2300=y
 CONFIG_SCSI_QLA2322=y
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -364,11 +448,15 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
 
 #
 # Fusion MPT device support
 #
 CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
 CONFIG_FUSION_MAX_SGE=128
 CONFIG_FUSION_CTL=m
 
@@ -383,82 +471,13 @@ CONFIG_FUSION_CTL=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -480,8 +499,10 @@ CONFIG_NETDEVICES=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -512,6 +533,10 @@ CONFIG_S2IO=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 
 #
 # ISDN subsystem
@@ -540,14 +565,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
 #
 # Input Device Drivers
 #
@@ -557,6 +574,12 @@ CONFIG_SOUND_GAMEPORT=y
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
 #
 # Character devices
 #
@@ -568,9 +591,10 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_CYCLADES is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
 # CONFIG_STALDRV is not set
 CONFIG_SGI_SNSC=y
 CONFIG_SGI_TIOCX=y
@@ -587,6 +611,7 @@ CONFIG_SGI_MBCS=m
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_SGI_L1_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_SGI_IOC4=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
@@ -615,18 +640,30 @@ CONFIG_EFI_RTC=y
 CONFIG_RAW_DRIVER=m
 # CONFIG_HPET is not set
 CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
 CONFIG_MMTIMER=y
 
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
 #
 # I2C support
 #
 # CONFIG_I2C is not set
+# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
 
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+
 #
 # Misc devices
 #
@@ -660,6 +697,8 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
 
@@ -669,9 +708,8 @@ CONFIG_USB=m
 # CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -679,7 +717,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_SL811_HCD is not set
 
@@ -710,12 +751,15 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_MOUSE is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
 
 #
 # USB Imaging devices
@@ -740,6 +784,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -763,9 +808,12 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -782,6 +830,7 @@ CONFIG_USB_HIDINPUT=y
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_VERBS=m
 CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
@@ -799,6 +848,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -814,13 +864,19 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
 CONFIG_XFS_FS=y
+CONFIG_XFS_EXPORT=y
 CONFIG_XFS_RT=y
 CONFIG_XFS_QUOTA=y
 # CONFIG_XFS_SECURITY is not set
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 CONFIG_QUOTA=y
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
@@ -854,7 +910,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 CONFIG_TMPFS_XATTR=y
@@ -885,15 +940,18 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -980,6 +1038,9 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Profiling support
@@ -989,15 +1050,19 @@ CONFIG_ZLIB_DEFLATE=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=20
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1019,11 +1084,12 @@ CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=m
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set

arch/ia64/configs/tiger_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc1-20050629
-# Wed Jun 29 15:28:12 2005
+# Linux kernel version: 2.6.13-rc6-tiger-smp
+# Wed Aug 17 10:19:51 2005
 #
 
 #
@@ -132,6 +132,7 @@ CONFIG_ACPI_BOOT=y
 CONFIG_ACPI_INTERPRETER=y
 CONFIG_ACPI_BUTTON=m
 # CONFIG_ACPI_VIDEO is not set
+# CONFIG_ACPI_HOTKEY is not set
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
 # CONFIG_ACPI_HOTPLUG_CPU is not set
@@ -169,6 +170,66 @@ CONFIG_HOTPLUG_PCI_ACPI=m
 #
 # CONFIG_PCCARD is not set
 
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
 #
 # Device Drivers
 #
@@ -178,7 +239,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 
 #
@@ -348,6 +409,7 @@ CONFIG_SCSI_QLA22XX=m
 CONFIG_SCSI_QLA2300=m
 CONFIG_SCSI_QLA2322=m
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -393,72 +455,8 @@ CONFIG_FUSION_CTL=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
 #
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
@@ -555,6 +553,10 @@ CONFIG_TIGON3=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 
 #
 # ISDN subsystem
@@ -680,6 +682,7 @@ CONFIG_DRM_R128=m
 CONFIG_DRM_RADEON=m
 CONFIG_DRM_MGA=m
 CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
@@ -696,12 +699,19 @@ CONFIG_MAX_RAW_DEVS=256
 # I2C support
 #
 # CONFIG_I2C is not set
+# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
 
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
 #
 # Misc devices
 #
@@ -800,6 +810,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_EGALAX is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
 
 #
 # USB Imaging devices
@@ -850,6 +861,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -910,6 +922,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y

arch/ia64/configs/zx1_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc1-20050629
-# Wed Jun 29 15:31:11 2005
+# Linux kernel version: 2.6.13-rc6
+# Wed Aug 17 10:02:43 2005
 #
 
 #
@@ -132,6 +132,7 @@ CONFIG_ACPI_BOOT=y
 CONFIG_ACPI_INTERPRETER=y
 CONFIG_ACPI_BUTTON=y
 CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_HOTKEY=m
 CONFIG_ACPI_FAN=y
 CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_THERMAL=y
@@ -168,6 +169,83 @@ CONFIG_HOTPLUG_PCI_ACPI=y
 #
 # CONFIG_PCCARD is not set
 
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_IP_TCPDIAG is not set
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+CONFIG_IP_NF_ARPTABLES=y
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
 #
 # Device Drivers
 #
@@ -349,6 +427,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -362,9 +441,11 @@ CONFIG_SCSI_QLA2XXX=y
 #
 # Fusion MPT device support
 #
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
 
 #
 # IEEE 1394 (FireWire) support
@@ -377,87 +458,8 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
+# Network device support
 #
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-CONFIG_IP_NF_ARPTABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
@@ -555,6 +557,8 @@ CONFIG_TIGON3=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -659,6 +663,7 @@ CONFIG_DRM=y
 CONFIG_DRM_RADEON=y
 # CONFIG_DRM_MGA is not set
 # CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HPET is not set
 # CONFIG_HANGCHECK_TIMER is not set
@@ -706,47 +711,10 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_SENSOR is not set
 
 #
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-
-#
-# Other I2C Chip support
+# Miscellaneous I2C Chip support
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
@@ -766,6 +734,11 @@ CONFIG_I2C_ALGOPCF=y
 #
 # CONFIG_W1 is not set
 
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+
 #
 # Misc devices
 #
@@ -782,7 +755,6 @@ CONFIG_VIDEO_DEV=y
 #
 # Video Adapters
 #
-# CONFIG_TUNER_MULTI_I2C is not set
 # CONFIG_VIDEO_BT848 is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_SAA5246A is not set
@@ -1025,6 +997,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_EGALAX is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
 
 #
 # USB Imaging devices
@@ -1080,6 +1053,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
 
 #
 # USB DSL modem support
@@ -1121,6 +1095,7 @@ CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 
 #
 # XFS support
@@ -1128,6 +1103,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y

arch/ia64/hp/sim/boot/boot_head.S

@@ -22,7 +22,7 @@ GLOBAL_ENTRY(_start)
 	.save rp, r0
 	.body
 	movl gp = __gp
-	movl sp = stack_mem
+	movl sp = stack_mem+16384-16
 	bsw.1
 	br.call.sptk.many rp=start_bootloader
 END(_start)

arch/ia64/kernel/domain.c

@@ -341,7 +341,7 @@ next_sg:
 #endif
 
 	/* Attach the domains */
-	for_each_online_cpu(i) {
+	for_each_cpu_mask(i, *cpu_map) {
 		struct sched_domain *sd;
 #ifdef CONFIG_SCHED_SMT
 		sd = &per_cpu(cpu_domains, i);

arch/ia64/kernel/perfmon.c

@@ -4312,6 +4312,7 @@ pfm_context_load(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs)
 	DPRINT(("before cmpxchg() old_ctx=%p new_ctx=%p\n",
 		thread->pfm_context, ctx));
 
+	ret = -EBUSY;
 	old = ia64_cmpxchg(acq, &thread->pfm_context, NULL, ctx, sizeof(pfm_context_t *));
 	if (old != NULL) {
 		DPRINT(("load_pid [%d] already has a context\n", req->load_pid));

arch/ia64/kernel/salinfo.c

@@ -143,7 +143,8 @@ struct salinfo_data {
 
 static struct salinfo_data salinfo_data[ARRAY_SIZE(salinfo_log_name)];
 
-static spinlock_t data_lock, data_saved_lock;
+static DEFINE_SPINLOCK(data_lock);
+static DEFINE_SPINLOCK(data_saved_lock);
 
 /** salinfo_platform_oemdata - optional callback to decode oemdata from an error
  * record.

arch/ia64/sn/kernel/io_init.c

@@ -203,6 +203,7 @@ static void sn_fixup_ionodes(void)
 				continue;
 			}
 
+			spin_lock_init(&sn_flush_device_list->sfdl_flush_lock);
 			hubdev->hdi_flush_nasid_list.widget_p[widget] =
 			    sn_flush_device_list;
 		}
@@ -322,7 +323,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 	struct pci_controller *controller;
 	struct pcibus_bussoft *prom_bussoft_ptr;
 	struct hubdev_info *hubdev_info;
-	void *provider_soft;
+	void *provider_soft = NULL;
 	struct sn_pcibus_provider *provider;
 
  	status = sal_get_pcibus_info((u64) segment, (u64) busnum,
@@ -338,7 +339,7 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 	if (bus == NULL) {
  		bus = pci_scan_bus(busnum, &pci_root_ops, controller);
  		if (bus == NULL)
- 			return;	/* error, or bus already scanned */
+ 			goto error_return; /* error, or bus already scanned */
  		bus->sysdata = NULL;
 	}
 
@@ -351,28 +352,30 @@ void sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
 	 */
 
 	if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES)
-		return;		/* unsupported asic type */
+		goto error_return; /* unsupported asic type */
 
 	if (prom_bussoft_ptr->bs_asic_type == PCIIO_ASIC_TYPE_PPB)
 		goto error_return; /* no further fixup necessary */
 
 	provider = sn_pci_provider[prom_bussoft_ptr->bs_asic_type];
 	if (provider == NULL)
-		return;		/* no provider registerd for this asic */
+		goto error_return; /* no provider registerd for this asic */
 
-	provider_soft = NULL;
+	bus->sysdata = controller;
 	if (provider->bus_fixup)
 		provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr, controller);
 
-	if (provider_soft == NULL)
-		return;		/* fixup failed or not applicable */
+	if (provider_soft == NULL) {
+		/* fixup failed or not applicable */
+		bus->sysdata = NULL;
+		goto error_return;
+	}
 
 	/*
 	 * Generic bus fixup goes here.  Don't reference prom_bussoft_ptr
 	 * after this point.
 	 */
 
-	bus->sysdata = controller;
 	PCI_CONTROLLER(bus)->platform_data = provider_soft;
 	nasid = NASID_GET(SN_PCIBUS_BUSSOFT(bus)->bs_base);
 	cnode = nasid_to_cnodeid(nasid);

arch/m32r/Kconfig

@@ -269,7 +269,7 @@ config NR_CPUS
 # Common NUMA Features
 config NUMA
 	bool "Numa Memory Allocation Support"
-	depends on SMP
+	depends on SMP && BROKEN
 	default n
 
 # turning this on wastes a bunch of space.
@@ -286,6 +286,7 @@ menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
 
 config PCI
 	bool "PCI support"
+	depends on BROKEN
 	default n
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a

arch/m32r/Kconfig.debug

@@ -20,7 +20,7 @@ config DEBUG_STACK_USAGE
 
 config DEBUG_PAGEALLOC
 	bool "Page alloc debugging"
-	depends on DEBUG_KERNEL
+	depends on DEBUG_KERNEL && BROKEN
 	help
 	  Unmap pages from the kernel linear mapping after free_pages().
 	  This results in a large slowdown, but helps to find certain types

arch/m32r/kernel/setup_m32700ut.c

@@ -30,9 +30,11 @@
 typedef struct {
 	unsigned long icucr;  /* ICU Control Register */
 } icu_data_t;
+static icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
+#else
+icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
 #endif /* CONFIG_SMP */
 
-static icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
 
 static void disable_m32700ut_irq(unsigned int irq)
 {

arch/m32r/kernel/setup_opsput.c

@@ -31,9 +31,11 @@
 typedef struct {
 	unsigned long icucr;  /* ICU Control Register */
 } icu_data_t;
+static icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
+#else
+icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
 #endif /* CONFIG_SMP */
 
-static icu_data_t icu_data[OPSPUT_NUM_CPU_IRQ];
 
 static void disable_opsput_irq(unsigned int irq)
 {

arch/m32r/kernel/smpboot.c

@@ -91,6 +91,7 @@ extern struct {
 
 /* which physical physical ID maps to which logical CPU number */
 static volatile int physid_2_cpu[NR_CPUS];
+#define physid_to_cpu(physid)	physid_2_cpu[physid]
 
 /* which logical CPU number maps to which physical ID */
 volatile int cpu_2_physid[NR_CPUS];

arch/m32r/lib/csum_partial_copy.c

@@ -58,3 +58,4 @@ csum_partial_copy_from_user (const unsigned char __user *src,
 	return csum_partial(dst, len-missing, sum);
 }
 EXPORT_SYMBOL(csum_partial_copy_from_user);
+EXPORT_SYMBOL(csum_partial);

arch/m32r/mm/discontig.c

@@ -12,12 +12,14 @@
 #include <linux/mmzone.h>
 #include <linux/initrd.h>
 #include <linux/nodemask.h>
+#include <linux/module.h>
 
 #include <asm/setup.h>
 
 extern char _end[];
 
 struct pglist_data *node_data[MAX_NUMNODES];
+EXPORT_SYMBOL(node_data);
 static bootmem_data_t node_bdata[MAX_NUMNODES] __initdata;
 
 pg_data_t m32r_node_data[MAX_NUMNODES];

arch/ppc/Kconfig

@@ -911,6 +911,7 @@ config PPCBUG_NVRAM
 	default y if PPC_PREP
 
 config SMP
+	depends on PPC_STD_MMU
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU. If you have
@@ -930,7 +931,7 @@ config SMP
 
 config IRQ_ALL_CPUS
 	bool "Distribute interrupts on all CPUs by default"
-	depends on SMP
+	depends on SMP && !MV64360
 	help
 	  This option gives the kernel permission to distribute IRQs across
 	  multiple CPUs.  Saying N here will route all IRQs to the first
@@ -1121,7 +1122,9 @@ config PROC_HARDWARE
 
 source "drivers/zorro/Kconfig"
 
+if !44x || BROKEN
 source kernel/power/Kconfig
+endif
 
 config SECCOMP
 	bool "Enable seccomp to safely compute untrusted bytecode"

arch/ppc/platforms/4xx/Kconfig

@@ -3,6 +3,11 @@ config 4xx
 	depends on 40x || 44x
 	default y
 
+config WANT_EARLY_SERIAL
+	bool
+	select SERIAL_8250
+	default n
+
 menu "IBM 4xx options"
 	depends on 4xx
 
@@ -18,6 +23,7 @@ config ASH
 
 config BUBINGA
 	bool "Bubinga"
+	select WANT_EARLY_SERIAL
 	help
 	  This option enables support for the IBM 405EP evaluation board.
 
@@ -70,21 +76,25 @@ choice
 
 config BAMBOO
 	bool "Bamboo"
+	select WANT_EARLY_SERIAL
 	help
 	  This option enables support for the IBM PPC440EP evaluation board.
 
 config EBONY
 	bool "Ebony"
+	select WANT_EARLY_SERIAL
 	help
 	  This option enables support for the IBM PPC440GP evaluation board.
 
 config LUAN
 	bool "Luan"
+	select WANT_EARLY_SERIAL
 	help
 	  This option enables support for the IBM PPC440SP evaluation board.
 
 config OCOTEA
 	bool "Ocotea"
+	select WANT_EARLY_SERIAL
 	help
 	  This option enables support for the IBM PPC440GX evaluation board.
 
@@ -230,10 +240,6 @@ config PPC_GEN550
 	depends on 4xx
 	default y
 
-config PM
-	bool "Power Management support (EXPERIMENTAL)"
-	depends on 4xx && EXPERIMENTAL
-
 choice
 	prompt "TTYS0 device and default console"
 	depends on 40x

arch/ppc/syslib/ppc4xx_dma.c

@@ -620,6 +620,7 @@ ppc4xx_clr_dma_status(unsigned int dmanr)
 	return DMA_STATUS_GOOD;
 }
 
+#ifdef CONFIG_PPC4xx_EDMA
 /*
  * Enables the burst on the channel (BTEN bit in the control/count register)
  * Note:
@@ -685,6 +686,11 @@ ppc4xx_set_burst_size(unsigned int dmanr, unsigned int bsize)
 	return DMA_STATUS_GOOD;
 }
 
+EXPORT_SYMBOL(ppc4xx_enable_burst);
+EXPORT_SYMBOL(ppc4xx_disable_burst);
+EXPORT_SYMBOL(ppc4xx_set_burst_size);
+#endif /* CONFIG_PPC4xx_EDMA */
+
 EXPORT_SYMBOL(ppc4xx_init_dma_channel);
 EXPORT_SYMBOL(ppc4xx_get_channel_config);
 EXPORT_SYMBOL(ppc4xx_set_channel_priority);
@@ -703,6 +709,4 @@ EXPORT_SYMBOL(ppc4xx_enable_dma_interrupt);
 EXPORT_SYMBOL(ppc4xx_disable_dma_interrupt);
 EXPORT_SYMBOL(ppc4xx_get_dma_status);
 EXPORT_SYMBOL(ppc4xx_clr_dma_status);
-EXPORT_SYMBOL(ppc4xx_enable_burst);
-EXPORT_SYMBOL(ppc4xx_disable_burst);
-EXPORT_SYMBOL(ppc4xx_set_burst_size);
+

arch/ppc64/kernel/LparData.c

@@ -32,32 +32,12 @@
 /* The HvReleaseData is the root of the information shared between 
  * the hypervisor and Linux.  
  */
-
-/*
- * WARNING - magic here
- *
- * Ok, this is a horrid hack below, but marginally better than the
- * alternatives.  What we really want is just to initialize
- * hvReleaseData in C as in the #if 0 section here.  However, gcc
- * refuses to believe that (u32)&x is a constant expression, so will
- * not allow the xMsNucDataOffset field to be properly initialized.
- * So, we declare hvReleaseData in inline asm instead.  We use inline
- * asm, rather than a .S file, because the assembler won't generate
- * the necessary relocation for the LparMap either, unless that symbol
- * is declared in the same source file.  Finally, we put the asm in a
- * dummy, attribute-used function, instead of at file scope, because
- * file scope asms don't allow contraints.  We want to use the "i"
- * constraints to put sizeof() and offsetof() expressions in there,
- * because including asm/offsets.h in C code then stringifying causes
- * all manner of warnings.
- */
-#if 0
 struct HvReleaseData hvReleaseData = {
 	.xDesc = 0xc8a5d9c4,	/* "HvRD" ebcdic */
 	.xSize = sizeof(struct HvReleaseData),
 	.xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas),
 	.xSlicNacaAddr = &naca,		/* 64-bit Naca address */
-	.xMsNucDataOffset = (u32)((unsigned long)&xLparMap - KERNELBASE),
+	.xMsNucDataOffset = LPARMAP_PHYS,
 	.xFlags = HVREL_TAGSINACTIVE	/* tags inactive       */
 					/* 64 bit              */
 					/* shared processors   */
@@ -70,63 +50,6 @@ struct HvReleaseData hvReleaseData = {
 		0xa7, 0x40, 0xf2, 0x4b,
 		0xf4, 0x4b, 0xf6, 0xf4 },
 };
-#endif
-
-
-extern struct HvReleaseData hvReleaseData;
-
-static void __attribute_used__ hvReleaseData_wrapper(void)
-{
-	/* This doesn't appear to need any alignment (even 4 byte) */
-	asm volatile (
-		"	lparMapPhys = xLparMap - %3\n"
-		"	.data\n"
-		"	.globl	hvReleaseData\n"
-		"hvReleaseData:\n"
-		"	.long	0xc8a5d9c4\n"	/* xDesc */
-						/* "HvRD" in ebcdic */
-		"	.short	%0\n"		/* xSize */
-		"	.short	%1\n"		/* xVpdAreasPtrOffset */
-		"	.llong	naca\n"		/* xSlicNacaAddr */
-		"	.long	lparMapPhys\n"	/* xMsNucDataOffset */
-		"	.long	0\n"		/* xRsvd1 */
-		"	.short	%2\n"		/* xFlags */
-		"	.short	4\n"	/* xVrmIndex  - v5r2m0 */
-		"	.short	3\n"	/* xMinSupportedPlicVrmIndex - v5r1m0 */
-		"	.short	3\n"	/* xMinCompatablePlicVrmIndex - v5r1m0 */
-		"	.long	0xd38995a4\n"	/* xVrmName */
-		"	.long	0xa740f24b\n"	/*   "Linux 2.4.64" ebcdic */
-		"	.long	0xf44bf6f4\n"
-		"	. = hvReleaseData + %0\n"
-		"	.previous\n"
-		: : "i"(sizeof(hvReleaseData)),
-		"i"(offsetof(struct naca_struct, xItVpdAreas)),
-		"i"(HVREL_TAGSINACTIVE /* tags inactive, 64 bit, */
-				       /* shared processors, HMT allowed */
-		    | 6), /* TEMP: This allows non-GA drivers */
-		"i"(KERNELBASE)
-		);
-}
-
-struct LparMap __attribute__((aligned (16))) xLparMap = {
-	.xNumberEsids = HvEsidsToMap,
-	.xNumberRanges = HvRangesToMap,
-	.xSegmentTableOffs = STAB0_PAGE,
-
-	.xEsids = {
-		{ .xKernelEsid = GET_ESID(KERNELBASE),
-		  .xKernelVsid = KERNEL_VSID(KERNELBASE), },
-		{ .xKernelEsid = GET_ESID(VMALLOCBASE),
-		  .xKernelVsid = KERNEL_VSID(VMALLOCBASE), },
-	},
-
-	.xRanges = {
-		{ .xPages = HvPagesToMap,
-		  .xOffset = 0,
-		  .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT),
-		},
-	},
-};
 
 extern void system_reset_iSeries(void);
 extern void machine_check_iSeries(void);

arch/ppc64/kernel/Makefile

@@ -73,3 +73,8 @@ obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 
 CFLAGS_ioctl32.o += -Ifs/
+
+ifeq ($(CONFIG_PPC_ISERIES),y)
+arch/ppc64/kernel/head.o: arch/ppc64/kernel/lparmap.s
+AFLAGS_head.o += -Iarch/ppc64/kernel
+endif

arch/ppc64/kernel/head.S

@@ -38,6 +38,7 @@
 #include <asm/cputable.h>
 #include <asm/setup.h>
 #include <asm/hvcall.h>
+#include <asm/iSeries/LparMap.h>
 
 #ifdef CONFIG_PPC_ISERIES
 #define DO_SOFT_DISABLE
@@ -679,6 +680,11 @@ hardware_interrupt_iSeries_masked:
 	.globl fwnmi_data_area
 fwnmi_data_area:
 
+#ifdef CONFIG_PPC_ISERIES
+	. = LPARMAP_PHYS
+#include "lparmap.s"
+#endif /* CONFIG_PPC_ISERIES */
+
 /*
  * Vectors for the FWNMI option.  Share common code.
  */

arch/ppc64/kernel/iommu.c

@@ -242,7 +242,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 	dma_addr_t dma_next = 0, dma_addr;
 	unsigned long flags;
 	struct scatterlist *s, *outs, *segstart;
-	int outcount;
+	int outcount, incount;
 	unsigned long handle;
 
 	BUG_ON(direction == DMA_NONE);
@@ -252,6 +252,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 
 	outs = s = segstart = &sglist[0];
 	outcount = 1;
+	incount = nelems;
 	handle = 0;
 
 	/* Init first segment length for backout at failure */
@@ -338,10 +339,10 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 
 	DBG("mapped %d elements:\n", outcount);
 
-	/* For the sake of iommu_free_sg, we clear out the length in the
+	/* For the sake of iommu_unmap_sg, we clear out the length in the
 	 * next entry of the sglist if we didn't fill the list completely
 	 */
-	if (outcount < nelems) {
+	if (outcount < incount) {
 		outs++;
 		outs->dma_address = DMA_ERROR_CODE;
 		outs->dma_length = 0;

arch/ppc64/kernel/lparmap.c

@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2005  Stephen Rothwell  IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/iSeries/LparMap.h>
+
+const struct LparMap __attribute__((__section__(".text"))) xLparMap = {
+	.xNumberEsids = HvEsidsToMap,
+	.xNumberRanges = HvRangesToMap,
+	.xSegmentTableOffs = STAB0_PAGE,
+
+	.xEsids = {
+		{ .xKernelEsid = GET_ESID(KERNELBASE),
+		  .xKernelVsid = KERNEL_VSID(KERNELBASE), },
+		{ .xKernelEsid = GET_ESID(VMALLOCBASE),
+		  .xKernelVsid = KERNEL_VSID(VMALLOCBASE), },
+	},
+
+	.xRanges = {
+		{ .xPages = HvPagesToMap,
+		  .xOffset = 0,
+		  .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT),
+		},
+	},
+};

arch/s390/kernel/cpcmd.c

@@ -46,9 +46,9 @@ int  __cpcmd(const char *cmd, char *response, int rlen, int *response_code)
 				"lra	3,0(%4)\n"
 				"lr	5,%5\n"
 				"diag	2,4,0x8\n"
-				"brc	8, .Litfits\n"
+				"brc	8, 1f\n"
 				"ar	5, %5\n"
-				".Litfits: \n"
+				"1: \n"
 				"lr	%0,4\n"
 				"lr	%1,5\n"
 				: "=d" (return_code), "=d" (return_len)
@@ -64,9 +64,9 @@ int  __cpcmd(const char *cmd, char *response, int rlen, int *response_code)
 				"sam31\n"
 				"diag	2,4,0x8\n"
 				"sam64\n"
-				"brc	8, .Litfits\n"
+				"brc	8, 1f\n"
 				"agr	5, %5\n"
-				".Litfits: \n"
+				"1: \n"
 				"lgr	%0,4\n"
 				"lgr	%1,5\n"
 				: "=d" (return_code), "=d" (return_len)

arch/sh/kernel/entry.S

@@ -1145,5 +1145,10 @@ ENTRY(sys_call_table)
 	.long sys_add_key		/* 285 */
 	.long sys_request_key
 	.long sys_keyctl
+	.long sys_ioprio_set
+	.long sys_ioprio_get
+	.long sys_inotify_init		/* 290 */
+	.long sys_inotify_add_watch
+	.long sys_inotify_rm_watch
 
 /* End of entry.S */

arch/sh64/kernel/syscalls.S

@@ -342,4 +342,9 @@ sys_call_table:
 	.long sys_add_key
 	.long sys_request_key
 	.long sys_keyctl		/* 315 */
+	.long sys_ioprio_set
+	.long sys_ioprio_get
+	.long sys_inotify_init
+	.long sys_inotify_add_watch
+	.long sys_inotify_rm_watch	/* 320 */
 

arch/sparc/kernel/sparc_ksyms.c

@@ -98,8 +98,9 @@ extern void ___rw_write_enter(void);
  * The module references will be fixed up by module_frob_arch_sections.
  */
 #define DOT_ALIAS2(__ret, __x, __arg1, __arg2) \
-	extern __ret __x(__arg1, __arg2) \
-	             __attribute__((weak, alias("." # __x)));
+	extern __ret __x(__arg1, __arg2); \
+	asm(".weak " #__x);\
+	asm(#__x "=." #__x);
 
 DOT_ALIAS2(int, div, int, int)
 DOT_ALIAS2(int, mul, int, int)

arch/sparc64/kernel/Makefile

@@ -8,7 +8,7 @@ EXTRA_CFLAGS := -Werror
 extra-y		:= head.o init_task.o vmlinux.lds
 
 obj-y		:= process.o setup.o cpu.o idprom.o \
-		   traps.o devices.o auxio.o \
+		   traps.o devices.o auxio.o una_asm.o \
 		   irq.o ptrace.o time.o sys_sparc.o signal.o \
 		   unaligned.o central.o pci.o starfire.o semaphore.o \
 		   power.o sbus.o iommu_common.o sparc64_ksyms.o chmc.o

arch/sparc64/kernel/traps.c

@@ -2127,6 +2127,9 @@ void __init trap_init(void)
 	    TI_PRE_COUNT != offsetof(struct thread_info, preempt_count) ||
 	    TI_NEW_CHILD != offsetof(struct thread_info, new_child) ||
 	    TI_SYS_NOERROR != offsetof(struct thread_info, syscall_noerror) ||
+	    TI_RESTART_BLOCK != offsetof(struct thread_info, restart_block) ||
+	    TI_KUNA_REGS != offsetof(struct thread_info, kern_una_regs) ||
+	    TI_KUNA_INSN != offsetof(struct thread_info, kern_una_insn) ||
 	    TI_FPREGS != offsetof(struct thread_info, fpregs) ||
 	    (TI_FPREGS & (64 - 1)))
 		thread_info_offsets_are_bolixed_dave();

arch/sparc64/kernel/una_asm.S

@@ -0,0 +1,153 @@
+/* una_asm.S: Kernel unaligned trap assembler helpers.
+ *
+ * Copyright (C) 1996,2005 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+	.text
+
+kernel_unaligned_trap_fault:
+	call	kernel_mna_trap_fault
+	 nop
+	retl
+	 nop
+	.size	kern_unaligned_trap_fault, .-kern_unaligned_trap_fault
+
+	.globl	__do_int_store
+__do_int_store:
+	rd	%asi, %o4
+	wr	%o3, 0, %asi
+	ldx	[%o2], %g3
+	cmp	%o1, 2
+	be,pn	%icc, 2f
+	 cmp	%o1, 4
+	be,pt	%icc, 1f
+	 srlx	%g3, 24, %g2
+	srlx	%g3, 56, %g1
+	srlx	%g3, 48, %g7
+4:	stba	%g1, [%o0] %asi
+	srlx	%g3, 40, %g1
+5:	stba	%g7, [%o0 + 1] %asi
+	srlx	%g3, 32, %g7
+6:	stba	%g1, [%o0 + 2] %asi
+7:	stba	%g7, [%o0 + 3] %asi
+	srlx	%g3, 16, %g1
+8:	stba	%g2, [%o0 + 4] %asi
+	srlx	%g3, 8, %g7
+9:	stba	%g1, [%o0 + 5] %asi
+10:	stba	%g7, [%o0 + 6] %asi
+	ba,pt	%xcc, 0f
+11:	 stba	%g3, [%o0 + 7] %asi
+1:	srl	%g3, 16, %g7
+12:	stba	%g2, [%o0] %asi
+	srl	%g3, 8, %g2
+13:	stba	%g7, [%o0 + 1] %asi
+14:	stba	%g2, [%o0 + 2] %asi
+	ba,pt	%xcc, 0f
+15:	 stba	%g3, [%o0 + 3] %asi
+2:	srl	%g3, 8, %g2
+16:	stba	%g2, [%o0] %asi
+17:	stba	%g3, [%o0 + 1] %asi
+0:
+	wr	%o4, 0x0, %asi
+	retl
+	 nop
+	.size	__do_int_store, .-__do_int_store
+
+	.section	__ex_table
+	.word		4b, kernel_unaligned_trap_fault
+	.word		5b, kernel_unaligned_trap_fault
+	.word		6b, kernel_unaligned_trap_fault
+	.word		7b, kernel_unaligned_trap_fault
+	.word		8b, kernel_unaligned_trap_fault
+	.word		9b, kernel_unaligned_trap_fault
+	.word		10b, kernel_unaligned_trap_fault
+	.word		11b, kernel_unaligned_trap_fault
+	.word		12b, kernel_unaligned_trap_fault
+	.word		13b, kernel_unaligned_trap_fault
+	.word		14b, kernel_unaligned_trap_fault
+	.word		15b, kernel_unaligned_trap_fault
+	.word		16b, kernel_unaligned_trap_fault
+	.word		17b, kernel_unaligned_trap_fault
+	.previous
+
+	.globl	do_int_load
+do_int_load:
+	rd	%asi, %o5
+	wr	%o4, 0, %asi
+	cmp	%o1, 8
+	bge,pn	%icc, 9f
+	 cmp	%o1, 4
+	be,pt	%icc, 6f
+4:	 lduba	[%o2] %asi, %g2
+5:	lduba	[%o2 + 1] %asi, %g3
+	sll	%g2, 8, %g2
+	brz,pt	%o3, 3f
+	 add	%g2, %g3, %g2
+	sllx	%g2, 48, %g2
+	srax	%g2, 48, %g2
+3:	ba,pt	%xcc, 0f
+	 stx	%g2, [%o0]
+6:	lduba	[%o2 + 1] %asi, %g3
+	sll	%g2, 24, %g2
+7:	lduba	[%o2 + 2] %asi, %g7
+	sll	%g3, 16, %g3
+8:	lduba	[%o2 + 3] %asi, %g1
+	sll	%g7, 8, %g7
+	or	%g2, %g3, %g2
+	or	%g7, %g1, %g7
+	or	%g2, %g7, %g2
+	brnz,a,pt %o3, 3f
+	 sra	%g2, 0, %g2
+3:	ba,pt	%xcc, 0f
+	 stx	%g2, [%o0]
+9:	lduba	[%o2] %asi, %g2
+10:	lduba	[%o2 + 1] %asi, %g3
+	sllx	%g2, 56, %g2
+11:	lduba	[%o2 + 2] %asi, %g7
+	sllx	%g3, 48, %g3
+12:	lduba	[%o2 + 3] %asi, %g1
+	sllx	%g7, 40, %g7
+	sllx	%g1, 32, %g1
+	or	%g2, %g3, %g2
+	or	%g7, %g1, %g7
+13:	lduba	[%o2 + 4] %asi, %g3
+	or	%g2, %g7, %g7
+14:	lduba	[%o2 + 5] %asi, %g1
+	sllx	%g3, 24, %g3
+15:	lduba	[%o2 + 6] %asi, %g2
+	sllx	%g1, 16, %g1
+	or	%g7, %g3, %g7
+16:	lduba	[%o2 + 7] %asi, %g3
+	sllx	%g2, 8, %g2
+	or	%g7, %g1, %g7
+	or	%g2, %g3, %g2
+	or	%g7, %g2, %g7
+	cmp	%o1, 8
+	be,a,pt %icc, 0f
+	 stx	%g7, [%o0]
+	srlx	%g7, 32, %g2
+	sra	%g7, 0, %g7
+	stx	%g2, [%o0]
+	stx	%g7, [%o0 + 8]
+0:
+	wr	%o5, 0x0, %asi
+	retl
+	 nop
+	.size	__do_int_load, .-__do_int_load
+
+	.section	__ex_table
+	.word		4b, kernel_unaligned_trap_fault
+	.word		5b, kernel_unaligned_trap_fault
+	.word		6b, kernel_unaligned_trap_fault
+	.word		7b, kernel_unaligned_trap_fault
+	.word		8b, kernel_unaligned_trap_fault
+	.word		9b, kernel_unaligned_trap_fault
+	.word		10b, kernel_unaligned_trap_fault
+	.word		11b, kernel_unaligned_trap_fault
+	.word		12b, kernel_unaligned_trap_fault
+	.word		13b, kernel_unaligned_trap_fault
+	.word		14b, kernel_unaligned_trap_fault
+	.word		15b, kernel_unaligned_trap_fault
+	.word		16b, kernel_unaligned_trap_fault
+	.previous

arch/sparc64/kernel/unaligned.c

@@ -180,169 +180,28 @@ static void __attribute_used__ unaligned_panic(char *str, struct pt_regs *regs)
 	die_if_kernel(str, regs);
 }
 
-#define do_integer_load(dest_reg, size, saddr, is_signed, asi, errh) ({		\
-__asm__ __volatile__ (								\
-	"wr	%4, 0, %%asi\n\t"						\
-	"cmp	%1, 8\n\t"							\
-	"bge,pn	%%icc, 9f\n\t"							\
-	" cmp	%1, 4\n\t"							\
-	"be,pt	%%icc, 6f\n"							\
-"4:\t"	" lduba	[%2] %%asi, %%l1\n"						\
-"5:\t"	"lduba	[%2 + 1] %%asi, %%l2\n\t"					\
-	"sll	%%l1, 8, %%l1\n\t"						\
-	"brz,pt	%3, 3f\n\t"							\
-	" add	%%l1, %%l2, %%l1\n\t"						\
-	"sllx	%%l1, 48, %%l1\n\t"						\
-	"srax	%%l1, 48, %%l1\n"						\
-"3:\t"	"ba,pt	%%xcc, 0f\n\t"							\
-	" stx	%%l1, [%0]\n"							\
-"6:\t"	"lduba	[%2 + 1] %%asi, %%l2\n\t"					\
-	"sll	%%l1, 24, %%l1\n"						\
-"7:\t"	"lduba	[%2 + 2] %%asi, %%g7\n\t"					\
-	"sll	%%l2, 16, %%l2\n"						\
-"8:\t"	"lduba	[%2 + 3] %%asi, %%g1\n\t"					\
-	"sll	%%g7, 8, %%g7\n\t"						\
-	"or	%%l1, %%l2, %%l1\n\t"						\
-	"or	%%g7, %%g1, %%g7\n\t"						\
-	"or	%%l1, %%g7, %%l1\n\t"						\
-	"brnz,a,pt %3, 3f\n\t"							\
-	" sra	%%l1, 0, %%l1\n"						\
-"3:\t"	"ba,pt	%%xcc, 0f\n\t"							\
-	" stx	%%l1, [%0]\n"							\
-"9:\t"	"lduba	[%2] %%asi, %%l1\n"						\
-"10:\t"	"lduba	[%2 + 1] %%asi, %%l2\n\t"					\
-	"sllx	%%l1, 56, %%l1\n"						\
-"11:\t"	"lduba	[%2 + 2] %%asi, %%g7\n\t"					\
-	"sllx	%%l2, 48, %%l2\n"						\
-"12:\t"	"lduba	[%2 + 3] %%asi, %%g1\n\t"					\
-	"sllx	%%g7, 40, %%g7\n\t"						\
-	"sllx	%%g1, 32, %%g1\n\t"						\
-	"or	%%l1, %%l2, %%l1\n\t"						\
-	"or	%%g7, %%g1, %%g7\n"						\
-"13:\t"	"lduba	[%2 + 4] %%asi, %%l2\n\t"					\
-	"or	%%l1, %%g7, %%g7\n"						\
-"14:\t"	"lduba	[%2 + 5] %%asi, %%g1\n\t"					\
-	"sllx	%%l2, 24, %%l2\n"						\
-"15:\t"	"lduba	[%2 + 6] %%asi, %%l1\n\t"					\
-	"sllx	%%g1, 16, %%g1\n\t"						\
-	"or	%%g7, %%l2, %%g7\n"						\
-"16:\t"	"lduba	[%2 + 7] %%asi, %%l2\n\t"					\
-	"sllx	%%l1, 8, %%l1\n\t"						\
-	"or	%%g7, %%g1, %%g7\n\t"						\
-	"or	%%l1, %%l2, %%l1\n\t"						\
-	"or	%%g7, %%l1, %%g7\n\t"						\
-	"cmp	%1, 8\n\t"							\
-	"be,a,pt %%icc, 0f\n\t"							\
-	" stx	%%g7, [%0]\n\t"							\
-	"srlx	%%g7, 32, %%l1\n\t"						\
-	"sra	%%g7, 0, %%g7\n\t"						\
-	"stx	%%l1, [%0]\n\t"							\
-	"stx	%%g7, [%0 + 8]\n"						\
-"0:\n\t"									\
-	"wr	%%g0, %5, %%asi\n\n\t"						\
-	".section __ex_table\n\t"						\
-	".word	4b, " #errh "\n\t"						\
-	".word	5b, " #errh "\n\t"						\
-	".word	6b, " #errh "\n\t"						\
-	".word	7b, " #errh "\n\t"						\
-	".word	8b, " #errh "\n\t"						\
-	".word	9b, " #errh "\n\t"						\
-	".word	10b, " #errh "\n\t"						\
-	".word	11b, " #errh "\n\t"						\
-	".word	12b, " #errh "\n\t"						\
-	".word	13b, " #errh "\n\t"						\
-	".word	14b, " #errh "\n\t"						\
-	".word	15b, " #errh "\n\t"						\
-	".word	16b, " #errh "\n\n\t"						\
-	".previous\n\t"								\
-	: : "r" (dest_reg), "r" (size), "r" (saddr), "r" (is_signed),		\
-	  "r" (asi), "i" (ASI_AIUS)						\
-	: "l1", "l2", "g7", "g1", "cc");					\
-})
+extern void do_int_load(unsigned long *dest_reg, int size,
+			unsigned long *saddr, int is_signed, int asi);
 	
-#define store_common(dst_addr, size, src_val, asi, errh) ({			\
-__asm__ __volatile__ (								\
-	"wr	%3, 0, %%asi\n\t"						\
-	"ldx	[%2], %%l1\n"							\
-	"cmp	%1, 2\n\t"							\
-	"be,pn	%%icc, 2f\n\t"							\
-	" cmp	%1, 4\n\t"							\
-	"be,pt	%%icc, 1f\n\t"							\
-	" srlx	%%l1, 24, %%l2\n\t"						\
-	"srlx	%%l1, 56, %%g1\n\t"						\
-	"srlx	%%l1, 48, %%g7\n"						\
-"4:\t"	"stba	%%g1, [%0] %%asi\n\t"						\
-	"srlx	%%l1, 40, %%g1\n"						\
-"5:\t"	"stba	%%g7, [%0 + 1] %%asi\n\t"					\
-	"srlx	%%l1, 32, %%g7\n"						\
-"6:\t"	"stba	%%g1, [%0 + 2] %%asi\n"						\
-"7:\t"	"stba	%%g7, [%0 + 3] %%asi\n\t"					\
-	"srlx	%%l1, 16, %%g1\n"						\
-"8:\t"	"stba	%%l2, [%0 + 4] %%asi\n\t"					\
-	"srlx	%%l1, 8, %%g7\n"						\
-"9:\t"	"stba	%%g1, [%0 + 5] %%asi\n"						\
-"10:\t"	"stba	%%g7, [%0 + 6] %%asi\n\t"					\
-	"ba,pt	%%xcc, 0f\n"							\
-"11:\t"	" stba	%%l1, [%0 + 7] %%asi\n"						\
-"1:\t"	"srl	%%l1, 16, %%g7\n"						\
-"12:\t"	"stba	%%l2, [%0] %%asi\n\t"						\
-	"srl	%%l1, 8, %%l2\n"						\
-"13:\t"	"stba	%%g7, [%0 + 1] %%asi\n"						\
-"14:\t"	"stba	%%l2, [%0 + 2] %%asi\n\t"					\
-	"ba,pt	%%xcc, 0f\n"							\
-"15:\t"	" stba	%%l1, [%0 + 3] %%asi\n"						\
-"2:\t"	"srl	%%l1, 8, %%l2\n"						\
-"16:\t"	"stba	%%l2, [%0] %%asi\n"						\
-"17:\t"	"stba	%%l1, [%0 + 1] %%asi\n"						\
-"0:\n\t"									\
-	"wr	%%g0, %4, %%asi\n\n\t"						\
-	".section __ex_table\n\t"						\
-	".word	4b, " #errh "\n\t"						\
-	".word	5b, " #errh "\n\t"						\
-	".word	6b, " #errh "\n\t"						\
-	".word	7b, " #errh "\n\t"						\
-	".word	8b, " #errh "\n\t"						\
-	".word	9b, " #errh "\n\t"						\
-	".word	10b, " #errh "\n\t"						\
-	".word	11b, " #errh "\n\t"						\
-	".word	12b, " #errh "\n\t"						\
-	".word	13b, " #errh "\n\t"						\
-	".word	14b, " #errh "\n\t"						\
-	".word	15b, " #errh "\n\t"						\
-	".word	16b, " #errh "\n\t"						\
-	".word	17b, " #errh "\n\n\t"						\
-	".previous\n\t"								\
-	: : "r" (dst_addr), "r" (size), "r" (src_val), "r" (asi), "i" (ASI_AIUS)\
-	: "l1", "l2", "g7", "g1", "cc");					\
-})
-
-#define do_integer_store(reg_num, size, dst_addr, regs, asi, errh) ({		\
-	unsigned long zero = 0;							\
-	unsigned long *src_val = &zero;						\
-										\
-	if (size == 16) {							\
-		size = 8;							\
-		zero = (((long)(reg_num ? 					\
-		        (unsigned)fetch_reg(reg_num, regs) : 0)) << 32) |	\
-			(unsigned)fetch_reg(reg_num + 1, regs);			\
-	} else if (reg_num) src_val = fetch_reg_addr(reg_num, regs);		\
-	store_common(dst_addr, size, src_val, asi, errh);			\
-})
-
-extern void smp_capture(void);
-extern void smp_release(void);
-
-#define do_atomic(srcdest_reg, mem, errh) ({					\
-	unsigned long flags, tmp;						\
-										\
-	smp_capture();								\
-	local_irq_save(flags);							\
-	tmp = *srcdest_reg;							\
-	do_integer_load(srcdest_reg, 4, mem, 0, errh);				\
-	store_common(mem, 4, &tmp, errh);					\
-	local_irq_restore(flags);						\
-	smp_release();								\
-})
+extern void __do_int_store(unsigned long *dst_addr, int size,
+			   unsigned long *src_val, int asi);
+
+static inline void do_int_store(int reg_num, int size, unsigned long *dst_addr,
+				struct pt_regs *regs, int asi)
+{
+	unsigned long zero = 0;
+	unsigned long *src_val = &zero;
+
+	if (size == 16) {
+		size = 8;
+		zero = (((long)(reg_num ?
+		        (unsigned)fetch_reg(reg_num, regs) : 0)) << 32) |
+			(unsigned)fetch_reg(reg_num + 1, regs);
+	} else if (reg_num) {
+		src_val = fetch_reg_addr(reg_num, regs);
+	}
+	__do_int_store(dst_addr, size, src_val, asi);
+}
 
 static inline void advance(struct pt_regs *regs)
 {
@@ -364,24 +223,29 @@ static inline int ok_for_kernel(unsigned int insn)
 	return !floating_point_load_or_store_p(insn);
 }
 
-void kernel_mna_trap_fault(struct pt_regs *regs, unsigned int insn) __asm__ ("kernel_mna_trap_fault");
-
-void kernel_mna_trap_fault(struct pt_regs *regs, unsigned int insn)
+void kernel_mna_trap_fault(void)
 {
-	unsigned long g2 = regs->u_regs [UREG_G2];
+	struct pt_regs *regs = current_thread_info()->kern_una_regs;
+	unsigned int insn = current_thread_info()->kern_una_insn;
+	unsigned long g2 = regs->u_regs[UREG_G2];
 	unsigned long fixup = search_extables_range(regs->tpc, &g2);
 
 	if (!fixup) {
-		unsigned long address = compute_effective_address(regs, insn, ((insn >> 25) & 0x1f));
+		unsigned long address;
+
+		address = compute_effective_address(regs, insn,
+						    ((insn >> 25) & 0x1f));
         	if (address < PAGE_SIZE) {
-                	printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference in mna handler");
+                	printk(KERN_ALERT "Unable to handle kernel NULL "
+			       "pointer dereference in mna handler");
         	} else
-                	printk(KERN_ALERT "Unable to handle kernel paging request in mna handler");
+                	printk(KERN_ALERT "Unable to handle kernel paging "
+			       "request in mna handler");
 	        printk(KERN_ALERT " at virtual address %016lx\n",address);
-		printk(KERN_ALERT "current->{mm,active_mm}->context = %016lx\n",
+		printk(KERN_ALERT "current->{active_,}mm->context = %016lx\n",
 			(current->mm ? CTX_HWBITS(current->mm->context) :
 			CTX_HWBITS(current->active_mm->context)));
-		printk(KERN_ALERT "current->{mm,active_mm}->pgd = %016lx\n",
+		printk(KERN_ALERT "current->{active_,}mm->pgd = %016lx\n",
 			(current->mm ? (unsigned long) current->mm->pgd :
 			(unsigned long) current->active_mm->pgd));
 	        die_if_kernel("Oops", regs);
@@ -400,48 +264,41 @@ asmlinkage void kernel_unaligned_trap(struct pt_regs *regs, unsigned int insn, u
 	enum direction dir = decode_direction(insn);
 	int size = decode_access_size(insn);
 
+	current_thread_info()->kern_una_regs = regs;
+	current_thread_info()->kern_una_insn = insn;
+
 	if (!ok_for_kernel(insn) || dir == both) {
-		printk("Unsupported unaligned load/store trap for kernel at <%016lx>.\n",
-		       regs->tpc);
-		unaligned_panic("Kernel does fpu/atomic unaligned load/store.", regs);
-
-		__asm__ __volatile__ ("\n"
-"kernel_unaligned_trap_fault:\n\t"
-		"mov	%0, %%o0\n\t"
-		"call	kernel_mna_trap_fault\n\t"
-		" mov	%1, %%o1\n\t"
-		:
-		: "r" (regs), "r" (insn)
-		: "o0", "o1", "o2", "o3", "o4", "o5", "o7",
-		  "g1", "g2", "g3", "g4", "g7", "cc");
+		printk("Unsupported unaligned load/store trap for kernel "
+		       "at <%016lx>.\n", regs->tpc);
+		unaligned_panic("Kernel does fpu/atomic "
+				"unaligned load/store.", regs);
+
+		kernel_mna_trap_fault();
 	} else {
-		unsigned long addr = compute_effective_address(regs, insn, ((insn >> 25) & 0x1f));
+		unsigned long addr;
 
+		addr = compute_effective_address(regs, insn,
+						 ((insn >> 25) & 0x1f));
 #ifdef DEBUG_MNA
-		printk("KMNA: pc=%016lx [dir=%s addr=%016lx size=%d] retpc[%016lx]\n",
-		       regs->tpc, dirstrings[dir], addr, size, regs->u_regs[UREG_RETPC]);
+		printk("KMNA: pc=%016lx [dir=%s addr=%016lx size=%d] "
+		       "retpc[%016lx]\n",
+		       regs->tpc, dirstrings[dir], addr, size,
+		       regs->u_regs[UREG_RETPC]);
 #endif
 		switch (dir) {
 		case load:
-			do_integer_load(fetch_reg_addr(((insn>>25)&0x1f), regs),
-					size, (unsigned long *) addr,
-					decode_signedness(insn), decode_asi(insn, regs),
-					kernel_unaligned_trap_fault);
+			do_int_load(fetch_reg_addr(((insn>>25)&0x1f), regs),
+				    size, (unsigned long *) addr,
+				    decode_signedness(insn),
+				    decode_asi(insn, regs));
 			break;
 
 		case store:
-			do_integer_store(((insn>>25)&0x1f), size,
-					 (unsigned long *) addr, regs,
-					 decode_asi(insn, regs),
-					 kernel_unaligned_trap_fault);
-			break;
-#if 0 /* unsupported */
-		case both:
-			do_atomic(fetch_reg_addr(((insn>>25)&0x1f), regs),
-				  (unsigned long *) addr,
-				  kernel_unaligned_trap_fault);
+			do_int_store(((insn>>25)&0x1f), size,
+				     (unsigned long *) addr, regs,
+				     decode_asi(insn, regs));
 			break;
-#endif
+
 		default:
 			panic("Impossible kernel unaligned trap.");
 			/* Not reached... */

arch/sparc64/kernel/us2e_cpufreq.c

@@ -88,7 +88,6 @@ static void frob_mem_refresh(int cpu_slowing_down,
 {
 	unsigned long old_refr_count, refr_count, mctrl;
 
-
 	refr_count  = (clock_tick * MCTRL0_REFR_INTERVAL);
 	refr_count /= (MCTRL0_REFR_CLKS_P_CNT * divisor * 1000000000UL);
 
@@ -230,6 +229,25 @@ static unsigned long estar_to_divisor(unsigned long estar)
 	return ret;
 }
 
+static unsigned int us2e_freq_get(unsigned int cpu)
+{
+	cpumask_t cpus_allowed;
+	unsigned long clock_tick, estar;
+
+	if (!cpu_online(cpu))
+		return 0;
+
+	cpus_allowed = current->cpus_allowed;
+	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+
+	clock_tick = sparc64_get_clock_tick(cpu) / 1000;
+	estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR);
+
+	set_cpus_allowed(current, cpus_allowed);
+
+	return clock_tick / estar_to_divisor(estar);
+}
+
 static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index)
 {
 	unsigned long new_bits, new_freq;
@@ -243,7 +261,7 @@ static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index)
 	cpus_allowed = current->cpus_allowed;
 	set_cpus_allowed(current, cpumask_of_cpu(cpu));
 
-	new_freq = clock_tick = sparc64_get_clock_tick(cpu);
+	new_freq = clock_tick = sparc64_get_clock_tick(cpu) / 1000;
 	new_bits = index_to_estar_mode(index);
 	divisor = index_to_divisor(index);
 	new_freq /= divisor;
@@ -258,7 +276,8 @@ static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index)
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
 	if (old_divisor != divisor)
-		us2e_transition(estar, new_bits, clock_tick, old_divisor, divisor);
+		us2e_transition(estar, new_bits, clock_tick * 1000,
+				old_divisor, divisor);
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
@@ -272,10 +291,8 @@ static int us2e_freq_target(struct cpufreq_policy *policy,
 	unsigned int new_index = 0;
 
 	if (cpufreq_frequency_table_target(policy,
-					      &us2e_freq_table[policy->cpu].table[0],
-					      target_freq,
-					      relation,
-					      &new_index))
+					   &us2e_freq_table[policy->cpu].table[0],
+					   target_freq, relation, &new_index))
 		return -EINVAL;
 
 	us2e_set_cpu_divider_index(policy->cpu, new_index);
@@ -292,7 +309,7 @@ static int us2e_freq_verify(struct cpufreq_policy *policy)
 static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy)
 {
 	unsigned int cpu = policy->cpu;
-	unsigned long clock_tick = sparc64_get_clock_tick(cpu);
+	unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
 	struct cpufreq_frequency_table *table =
 		&us2e_freq_table[cpu].table[0];
 
@@ -351,9 +368,10 @@ static int __init us2e_freq_init(void)
 		memset(us2e_freq_table, 0,
 		       (NR_CPUS * sizeof(struct us2e_freq_percpu_info)));
 
+		driver->init = us2e_freq_cpu_init;
 		driver->verify = us2e_freq_verify;
 		driver->target = us2e_freq_target;
-		driver->init = us2e_freq_cpu_init;
+		driver->get = us2e_freq_get;
 		driver->exit = us2e_freq_cpu_exit;
 		driver->owner = THIS_MODULE,
 		strcpy(driver->name, "UltraSPARC-IIe");

arch/sparc64/kernel/us3_cpufreq.c

@@ -56,7 +56,7 @@ static void write_safari_cfg(unsigned long val)
 
 static unsigned long get_current_freq(unsigned int cpu, unsigned long safari_cfg)
 {
-	unsigned long clock_tick = sparc64_get_clock_tick(cpu);
+	unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
 	unsigned long ret;
 
 	switch (safari_cfg & SAFARI_CFG_DIV_MASK) {
@@ -76,6 +76,26 @@ static unsigned long get_current_freq(unsigned int cpu, unsigned long safari_cfg
 	return ret;
 }
 
+static unsigned int us3_freq_get(unsigned int cpu)
+{
+	cpumask_t cpus_allowed;
+	unsigned long reg;
+	unsigned int ret;
+
+	if (!cpu_online(cpu))
+		return 0;
+
+	cpus_allowed = current->cpus_allowed;
+	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+
+	reg = read_safari_cfg();
+	ret = get_current_freq(cpu, reg);
+
+	set_cpus_allowed(current, cpus_allowed);
+
+	return ret;
+}
+
 static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index)
 {
 	unsigned long new_bits, new_freq, reg;
@@ -88,7 +108,7 @@ static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index)
 	cpus_allowed = current->cpus_allowed;
 	set_cpus_allowed(current, cpumask_of_cpu(cpu));
 
-	new_freq = sparc64_get_clock_tick(cpu);
+	new_freq = sparc64_get_clock_tick(cpu) / 1000;
 	switch (index) {
 	case 0:
 		new_bits = SAFARI_CFG_DIV_1;
@@ -150,7 +170,7 @@ static int us3_freq_verify(struct cpufreq_policy *policy)
 static int __init us3_freq_cpu_init(struct cpufreq_policy *policy)
 {
 	unsigned int cpu = policy->cpu;
-	unsigned long clock_tick = sparc64_get_clock_tick(cpu);
+	unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
 	struct cpufreq_frequency_table *table =
 		&us3_freq_table[cpu].table[0];
 
@@ -206,9 +226,10 @@ static int __init us3_freq_init(void)
 		memset(us3_freq_table, 0,
 		       (NR_CPUS * sizeof(struct us3_freq_percpu_info)));
 
+		driver->init = us3_freq_cpu_init;
 		driver->verify = us3_freq_verify;
 		driver->target = us3_freq_target;
-		driver->init = us3_freq_cpu_init;
+		driver->get = us3_freq_get;
 		driver->exit = us3_freq_cpu_exit;
 		driver->owner = THIS_MODULE,
 		strcpy(driver->name, "UltraSPARC-III");

arch/um/kernel/skas/process.c

@@ -61,7 +61,11 @@ void wait_stub_done(int pid, int sig, char * fname)
 
                 CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
         } while((n >= 0) && WIFSTOPPED(status) &&
-                (WSTOPSIG(status) == SIGVTALRM));
+                ((WSTOPSIG(status) == SIGVTALRM) ||
+		 /* running UML inside a detached screen can cause
+		  * SIGWINCHes
+		  */
+		 (WSTOPSIG(status) == SIGWINCH)));
 
         if((n < 0) || !WIFSTOPPED(status) ||
            (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){

arch/um/os-Linux/elf_aux.c

@@ -9,7 +9,6 @@
  */
 #include <elf.h>
 #include <stddef.h>
-#include <asm/elf.h>
 #include "init.h"
 #include "elf_user.h"
 #include "mem_user.h"

arch/x86_64/kernel/smpboot.c

@@ -492,6 +492,14 @@ void __cpuinit start_secondary(void)
 	 */
 	set_cpu_sibling_map(smp_processor_id());
 
+	/* 
+  	 * Wait for TSC sync to not schedule things before.
+	 * We still process interrupts, which could see an inconsistent
+	 * time in that window unfortunately. 
+	 * Do this here because TSC sync has global unprotected state.
+ 	 */
+	tsc_sync_wait();
+
 	/*
 	 * We need to hold call_lock, so there is no inconsistency
 	 * between the time smp_call_function() determines number of
@@ -509,13 +517,6 @@ void __cpuinit start_secondary(void)
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
 	unlock_ipi_call_lock();
 
-	mb();
-
-	/* Wait for TSC sync to not schedule things before.
-	   We still process interrupts, which could see an inconsistent
-	   time in that window unfortunately. */
-	tsc_sync_wait();
-
 	cpu_idle();
 }
 

arch/x86_64/mm/fault.c

@@ -211,9 +211,7 @@ int unhandled_signal(struct task_struct *tsk, int sig)
 {
 	if (tsk->pid == 1)
 		return 1;
-	/* Warn for strace, but not for gdb */
-	if (!test_ti_thread_flag(tsk->thread_info, TIF_SYSCALL_TRACE) &&
-	    (tsk->ptrace & PT_PTRACED))
+	if (tsk->ptrace & PT_PTRACED)
 		return 0;
 	return (tsk->sighand->action[sig-1].sa.sa_handler == SIG_IGN) ||
 		(tsk->sighand->action[sig-1].sa.sa_handler == SIG_DFL);

arch/x86_64/pci/k8-bus.c

@@ -47,13 +47,22 @@ fill_mp_bus_to_cpumask(void)
 			 * if there are no busses hanging off of the current
 			 * ldt link then both the secondary and subordinate
 			 * bus number fields are set to 0.
+			 * 
+			 * RED-PEN
+			 * This is slightly broken because it assumes
+ 			 * HT node IDs == Linux node ids, which is not always
+			 * true. However it is probably mostly true.
 			 */
 			if (!(SECONDARY_LDT_BUS_NUMBER(ldtbus) == 0
 				&& SUBORDINATE_LDT_BUS_NUMBER(ldtbus) == 0)) {
 				for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus);
 				     j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus);
-				     j++)
-					pci_bus_to_node[j] = NODE_ID(nid);
+				     j++) { 
+					int node = NODE_ID(nid);
+					if (!node_online(node))
+						node = 0;
+					pci_bus_to_node[j] = node;
+				}		
 			}
 		}
 	}

drivers/acpi/osl.c

@@ -71,7 +71,7 @@ EXPORT_SYMBOL(acpi_in_debugger);
 extern char line_buf[80];
 #endif /*ENABLE_DEBUGGER*/
 
-int acpi_specific_hotkey_enabled;
+int acpi_specific_hotkey_enabled = TRUE;
 EXPORT_SYMBOL(acpi_specific_hotkey_enabled);
 
 static unsigned int acpi_irq_irq;
@@ -1162,11 +1162,11 @@ __setup("acpi_wake_gpes_always_on", acpi_wake_gpes_always_on_setup);
 int __init
 acpi_hotkey_setup(char *str)
 {
-	acpi_specific_hotkey_enabled = TRUE;
+	acpi_specific_hotkey_enabled = FALSE;
 	return 1;
 }
 
-__setup("acpi_specific_hotkey", acpi_hotkey_setup);
+__setup("acpi_generic_hotkey", acpi_hotkey_setup);
 
 /*
  * max_cstate is defined in the base kernel so modules can

drivers/base/bus.c

@@ -180,7 +180,9 @@ static ssize_t driver_bind(struct device_driver *drv,
 		up(&dev->sem);
 		put_device(dev);
 	}
-	return err;
+	if (err)
+		return err;
+	return count;
 }
 static DRIVER_ATTR(bind, S_IWUSR, NULL, driver_bind);
 

drivers/base/class.c

@@ -299,6 +299,11 @@ static void class_dev_release(struct kobject * kobj)
 
 	pr_debug("device class '%s': release.\n", cd->class_id);
 
+	if (cd->devt_attr) {
+		kfree(cd->devt_attr);
+		cd->devt_attr = NULL;
+	}
+
 	if (cls->release)
 		cls->release(cd);
 	else {
@@ -591,11 +596,8 @@ void class_device_del(struct class_device *class_dev)
 
 	if (class_dev->dev)
 		sysfs_remove_link(&class_dev->kobj, "device");
-	if (class_dev->devt_attr) {
+	if (class_dev->devt_attr)
 		class_device_remove_file(class_dev, class_dev->devt_attr);
-		kfree(class_dev->devt_attr);
-		class_dev->devt_attr = NULL;
-	}
 	class_device_remove_attrs(class_dev);
 
 	kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE);

drivers/char/Kconfig

@@ -80,7 +80,7 @@ config SERIAL_NONSTANDARD
 
 config COMPUTONE
 	tristate "Computone IntelliPort Plus serial support"
-	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (BROKEN || !SPARC32)
 	---help---
 	  This driver supports the entire family of Intelliport II/Plus
 	  controllers with the exception of the MicroChannel controllers and
@@ -138,7 +138,7 @@ config CYZ_INTR
 
 config DIGIEPCA
 	tristate "Digiboard Intelligent Async Support"
-	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && (!64BIT || BROKEN)
 	---help---
 	  This is a driver for Digi International's Xx, Xeve, and Xem series
 	  of cards which provide multiple serial ports. You would need
@@ -208,7 +208,7 @@ config SYNCLINK
 
 config SYNCLINKMP
 	tristate "SyncLink Multiport support"
-	depends on SERIAL_NONSTANDARD
+	depends on SERIAL_NONSTANDARD && (BROKEN || !SPARC32)
 	help
 	  Enable support for the SyncLink Multiport (2 or 4 ports)
 	  serial adapter, running asynchronous and HDLC communications up
@@ -735,7 +735,7 @@ config SGI_IP27_RTC
 
 config GEN_RTC
 	tristate "Generic /dev/rtc emulation"
-	depends on RTC!=y && !IA64 && !ARM && !PPC64
+	depends on RTC!=y && !IA64 && !ARM && !PPC64 && !M32R && !SPARC32
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you

drivers/ide/Kconfig

@@ -764,6 +764,7 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST
 config BLK_DEV_IDEDMA_PMAC
 	bool "PowerMac IDE DMA support"
 	depends on BLK_DEV_IDE_PMAC
+	select BLK_DEV_IDEDMA_PCI
 	help
 	  This option allows the driver for the built-in IDE controller on
 	  Power Macintoshes and PowerBooks to use DMA (direct memory access)

drivers/ide/ide-floppy.c

@@ -317,7 +317,7 @@ typedef struct ide_floppy_obj {
 	unsigned long flags;
 } idefloppy_floppy_t;
 
-#define IDEFLOPPY_TICKS_DELAY	3	/* default delay for ZIP 100 */
+#define IDEFLOPPY_TICKS_DELAY	HZ/20	/* default delay for ZIP 100 (50ms) */
 
 /*
  *	Floppy flag bits values.

drivers/ide/pci/generic.c

@@ -173,6 +173,12 @@ static ide_pci_device_t generic_chipsets[] __devinitdata = {
 		.channels	= 2,
 		.autodma	= NOAUTODMA,
 		.bootable	= ON_BOARD,
+	},{	/* 14 */
+		.name		= "Revolution",
+		.init_hwif	= init_hwif_generic,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.bootable	= OFF_BOARD,
 	}
 };
 
@@ -231,6 +237,7 @@ static struct pci_device_id generic_pci_tbl[] = {
 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11},
 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12},
 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13},
+	{ PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION,          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14},
 	/* Must come last. If you add entries adjust this table appropriately and the init_one code */
 	{ PCI_ANY_ID,		PCI_ANY_ID,			   PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0},
 	{ 0, },

drivers/ide/pci/serverworks.c

@@ -21,6 +21,9 @@
  *
  *   CSB6: `Champion South Bridge' IDE Interface (optional: third channel)
  *
+ *   HT1000: AKA BCM5785 - Hypertransport Southbridge for Opteron systems. IDE
+ *   controller same as the CSB6. Single channel ATA100 only.
+ *
  * Documentation:
  *	Available under NDA only. Errata info very hard to get.
  *
@@ -71,6 +74,8 @@ static u8 svwks_ratemask (ide_drive_t *drive)
 	if (!svwks_revision)
 		pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
 
+	if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
+		return 2;
 	if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
 		u32 reg = 0;
 		if (isa_dev)
@@ -109,6 +114,7 @@ static u8 svwks_csb_check (struct pci_dev *dev)
 		case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
 		case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
 		case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
+		case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
 			return 1;
 		default:
 			break;
@@ -438,6 +444,13 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha
 			btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
 		pci_write_config_byte(dev, 0x5A, btr);
 	}
+	/* Setup HT1000 SouthBridge Controller - Single Channel Only */
+	else if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) {
+		pci_read_config_byte(dev, 0x5A, &btr);
+		btr &= ~0x40;
+		btr |= 0x3;
+		pci_write_config_byte(dev, 0x5A, btr);
+	}
 
 	return (dev->irq) ? dev->irq : 0;
 }
@@ -629,6 +642,15 @@ static ide_pci_device_t serverworks_chipsets[] __devinitdata = {
 		.channels	= 1,	/* 2 */
 		.autodma	= AUTODMA,
 		.bootable	= ON_BOARD,
+	},{	/* 4 */
+		.name		= "SvrWks HT1000",
+		.init_setup	= init_setup_svwks,
+		.init_chipset	= init_chipset_svwks,
+		.init_hwif	= init_hwif_svwks,
+		.init_dma	= init_dma_svwks,
+		.channels	= 1,	/* 2 */
+		.autodma	= AUTODMA,
+		.bootable	= ON_BOARD,
 	}
 };
 
@@ -653,6 +675,7 @@ static struct pci_device_id svwks_pci_tbl[] = {
 	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
 	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
 	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
+	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);

drivers/ide/ppc/pmac.c

@@ -1664,7 +1664,7 @@ static struct macio_driver pmac_ide_macio_driver =
 };
 
 static struct pci_device_id pmac_ide_pci_match[] = {
-	{ PCI_VENDOR_ID_APPLE, PCI_DEVIEC_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_ATA,

drivers/ide/setup-pci.c

@@ -229,6 +229,7 @@ second_chance_to_dma:
 			case PCI_DEVICE_ID_AMD_VIPER_7409:
 			case PCI_DEVICE_ID_CMD_643:
 			case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
+			case PCI_DEVICE_ID_REVOLUTION:
 				simplex_stat = hwif->INB(dma_base + 2);
 				hwif->OUTB((simplex_stat&0x60),(dma_base + 2));
 				simplex_stat = hwif->INB(dma_base + 2);

drivers/infiniband/Kconfig

@@ -1,6 +1,7 @@
 menu "InfiniBand support"
 
 config INFINIBAND
+	depends on PCI || BROKEN
 	tristate "InfiniBand support"
 	---help---
 	  Core support for InfiniBand (IB).  Make sure to also select

drivers/isdn/hisax/Kconfig

@@ -134,6 +134,7 @@ config HISAX_AVM_A1
 
 config HISAX_FRITZPCI
 	bool "AVM PnP/PCI (Fritz!PnP/PCI)"
+	depends on BROKEN || !PPC64
 	help
 	  This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
 	  See <file:Documentation/isdn/README.HiSax> on how to configure it.

drivers/macintosh/Kconfig

@@ -103,7 +103,7 @@ config PMAC_MEDIABAY
 # on non-powerbook machines (but only on PMU based ones AFAIK)
 config PMAC_BACKLIGHT
 	bool "Backlight control for LCD screens"
-	depends on ADB_PMU
+	depends on ADB_PMU && (BROKEN || !PPC64)
 	help
 	  Say Y here to build in code to manage the LCD backlight on a
 	  Macintosh PowerBook.  With this code, the backlight will be turned

drivers/md/md.c

@@ -256,8 +256,7 @@ static inline void mddev_unlock(mddev_t * mddev)
 {
 	up(&mddev->reconfig_sem);
 
-	if (mddev->thread)
-		md_wakeup_thread(mddev->thread);
+	md_wakeup_thread(mddev->thread);
 }
 
 mdk_rdev_t * find_rdev_nr(mddev_t *mddev, int nr)
@@ -623,6 +622,7 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev)
 		mddev->raid_disks = sb->raid_disks;
 		mddev->size = sb->size;
 		mddev->events = md_event(sb);
+		mddev->bitmap_offset = 0;
 
 		if (sb->state & (1<<MD_SB_CLEAN))
 			mddev->recovery_cp = MaxSector;
@@ -938,6 +938,7 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
 		mddev->raid_disks = le32_to_cpu(sb->raid_disks);
 		mddev->size = le64_to_cpu(sb->size)/2;
 		mddev->events = le64_to_cpu(sb->events);
+		mddev->bitmap_offset = 0;
 		
 		mddev->recovery_cp = le64_to_cpu(sb->resync_offset);
 		memcpy(mddev->uuid, sb->set_uuid, 16);
@@ -1712,6 +1713,7 @@ static int do_md_run(mddev_t * mddev)
 	mddev->in_sync = 1;
 	
 	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+	md_wakeup_thread(mddev->thread);
 	
 	if (mddev->sb_dirty)
 		md_update_sb(mddev);
@@ -1824,6 +1826,7 @@ static int do_md_stop(mddev_t * mddev, int ro)
 		fput(mddev->bitmap_file);
 		mddev->bitmap_file = NULL;
 	}
+	mddev->bitmap_offset = 0;
 
 	/*
 	 * Free resources if final stop
@@ -2233,8 +2236,7 @@ static int add_new_disk(mddev_t * mddev, mdu_disk_info_t *info)
 			export_rdev(rdev);
 
 		set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
-		if (mddev->thread)
-			md_wakeup_thread(mddev->thread);
+		md_wakeup_thread(mddev->thread);
 		return err;
 	}
 

drivers/media/video/Kconfig

@@ -356,7 +356,7 @@ config VIDEO_M32R_AR
 
 config VIDEO_M32R_AR_M64278
 	tristate "Use Colour AR module M64278(VGA)"
-	depends on VIDEO_M32R_AR
+	depends on VIDEO_M32R_AR && PLAT_M32700UT
 	---help---
 	  Say Y here to use the Renesas M64278E-800 camera module,
 	  which supports VGA(640x480 pixcels) size of images.

drivers/net/8139cp.c

@@ -1897,6 +1897,7 @@ static int cp_resume (struct pci_dev *pdev)
 {
 	struct net_device *dev;
 	struct cp_private *cp;
+	unsigned long flags;
 
 	dev = pci_get_drvdata (pdev);
 	cp  = netdev_priv(dev);
@@ -1910,6 +1911,12 @@ static int cp_resume (struct pci_dev *pdev)
 	
 	cp_init_hw (cp);
 	netif_start_queue (dev);
+
+	spin_lock_irqsave (&cp->lock, flags);
+
+	mii_check_media(&cp->mii_if, netif_msg_link(cp), FALSE);
+
+	spin_unlock_irqrestore (&cp->lock, flags);
 	
 	return 0;
 }

drivers/net/Kconfig

@@ -1145,7 +1145,7 @@ config IBMVETH
 	  be called ibmveth.
 
 config IBM_EMAC
-	tristate "IBM PPC4xx EMAC driver support"
+	bool "IBM PPC4xx EMAC driver support"
 	depends on 4xx
 	select CRC32
 	---help---
@@ -1154,7 +1154,7 @@ config IBM_EMAC
 
 config IBM_EMAC_ERRMSG
 	bool "Verbose error messages"
-	depends on IBM_EMAC
+	depends on IBM_EMAC && BROKEN
 
 config IBM_EMAC_RXB
 	int "Number of receive buffers"

drivers/net/dm9000.c

@@ -48,6 +48,10 @@
  *                        net_device_stats
  *                      * introduced tx_timeout function
  *                      * reworked locking
+ *
+ *	  01-Jul-2005   Ben Dooks <ben@simtec.co.uk>
+ *			* fixed spinlock call without pointer
+ *			* ensure spinlock is initialised
  */
 
 #include <linux/module.h>
@@ -148,7 +152,6 @@ static int dm9000_probe(struct device *);
 static int dm9000_open(struct net_device *);
 static int dm9000_start_xmit(struct sk_buff *, struct net_device *);
 static int dm9000_stop(struct net_device *);
-static int dm9000_do_ioctl(struct net_device *, struct ifreq *, int);
 
 
 static void dm9000_timer(unsigned long);
@@ -322,7 +325,7 @@ static void dm9000_timeout(struct net_device *dev)
 
 	/* Save previous register address */
 	reg_save = readb(db->io_addr);
-	spin_lock_irqsave(db->lock,flags);
+	spin_lock_irqsave(&db->lock,flags);
 
 	netif_stop_queue(dev);
 	dm9000_reset(db);
@@ -333,7 +336,7 @@ static void dm9000_timeout(struct net_device *dev)
 
 	/* Restore previous register address */
 	writeb(reg_save, db->io_addr);
-	spin_unlock_irqrestore(db->lock,flags);
+	spin_unlock_irqrestore(&db->lock,flags);
 }
 
 
@@ -387,8 +390,6 @@ dm9000_probe(struct device *dev)
 	int i;
 	u32 id_val;
 
-	printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
-
 	/* Init network device */
 	ndev = alloc_etherdev(sizeof (struct board_info));
 	if (!ndev) {
@@ -405,6 +406,8 @@ dm9000_probe(struct device *dev)
 	db = (struct board_info *) ndev->priv;
 	memset(db, 0, sizeof (*db));
 
+	spin_lock_init(&db->lock);
+
 	if (pdev->num_resources < 2) {
 		ret = -ENODEV;
 		goto out;
@@ -541,7 +544,6 @@ dm9000_probe(struct device *dev)
 	ndev->stop		 = &dm9000_stop;
 	ndev->get_stats		 = &dm9000_get_stats;
 	ndev->set_multicast_list = &dm9000_hash_table;
-	ndev->do_ioctl		 = &dm9000_do_ioctl;
 
 #ifdef DM9000_PROGRAM_EEPROM
 	program_eeprom(db);
@@ -612,7 +614,7 @@ dm9000_open(struct net_device *dev)
 
 	/* set and active a timer process */
 	init_timer(&db->timer);
-	db->timer.expires  = DM9000_TIMER_WUT * 2;
+	db->timer.expires  = DM9000_TIMER_WUT;
 	db->timer.data     = (unsigned long) dev;
 	db->timer.function = &dm9000_timer;
 	add_timer(&db->timer);
@@ -845,15 +847,6 @@ dm9000_get_stats(struct net_device *dev)
 	return &db->stats;
 }
 
-/*
- *  Process the upper socket ioctl command
- */
-static int
-dm9000_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	PRINTK1("entering %s\n",__FUNCTION__);
-	return 0;
-}
 
 /*
  *  A periodic timer routine
@@ -864,21 +857,11 @@ dm9000_timer(unsigned long data)
 {
 	struct net_device *dev = (struct net_device *) data;
 	board_info_t *db = (board_info_t *) dev->priv;
-	u8 reg_save;
-	unsigned long flags;
 
 	PRINTK3("dm9000_timer()\n");
 
-	spin_lock_irqsave(db->lock,flags);
-	/* Save previous register address */
-	reg_save = readb(db->io_addr);
-
 	mii_check_media(&db->mii, netif_msg_link(db), 0);
 
-	/* Restore previous register address */
-	writeb(reg_save, db->io_addr);
-	spin_unlock_irqrestore(db->lock,flags);
-
 	/* Set timer again */
 	db->timer.expires = DM9000_TIMER_WUT;
 	add_timer(&db->timer);
@@ -1098,9 +1081,14 @@ dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
 {
 	board_info_t *db = (board_info_t *) dev->priv;
 	unsigned long flags;
+	unsigned int reg_save;
 	int ret;
 
 	spin_lock_irqsave(&db->lock,flags);
+
+	/* Save previous register address */
+	reg_save = readb(db->io_addr);
+
 	/* Fill the phyxcer register into REG_0C */
 	iow(db, DM9000_EPAR, DM9000_PHY | reg);
 
@@ -1111,6 +1099,9 @@ dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
 	/* The read data keeps on REG_0D & REG_0E */
 	ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
 
+	/* restore the previous address */
+	writeb(reg_save, db->io_addr);
+
 	spin_unlock_irqrestore(&db->lock,flags);
 
 	return ret;
@@ -1124,9 +1115,13 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value)
 {
 	board_info_t *db = (board_info_t *) dev->priv;
 	unsigned long flags;
+	unsigned long reg_save;
 
 	spin_lock_irqsave(&db->lock,flags);
 
+	/* Save previous register address */
+	reg_save = readb(db->io_addr);
+
 	/* Fill the phyxcer register into REG_0C */
 	iow(db, DM9000_EPAR, DM9000_PHY | reg);
 
@@ -1138,6 +1133,9 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value)
 	udelay(500);		/* Wait write complete */
 	iow(db, DM9000_EPCR, 0x0);	/* Clear phyxcer write command */
 
+	/* restore the previous address */
+	writeb(reg_save, db->io_addr);
+
 	spin_unlock_irqrestore(&db->lock,flags);
 }
 
@@ -1202,6 +1200,8 @@ static struct device_driver dm9000_driver = {
 static int __init
 dm9000_init(void)
 {
+	printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
+
 	return driver_register(&dm9000_driver);	/* search board and register */
 }
 

drivers/net/ibm_emac/ibm_emac_core.c

@@ -1712,11 +1712,10 @@ struct mal_commac_ops emac_commac_ops = {
 };
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
-static int emac_netpoll(struct net_device *ndev)
+static void emac_netpoll(struct net_device *ndev)
 {
 	emac_rxeob_dev((void *)ndev, 0);
 	emac_txeob_dev((void *)ndev, 0);
-	return 0;
 }
 #endif
 

drivers/net/ioc3-eth.c

@@ -499,7 +499,7 @@ static int ioc3_mdio_read(struct net_device *dev, int phy, int reg)
 	ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg | MICR_READTRIG);
 	while (ioc3_r_micr() & MICR_BUSY);
 
-	return ioc3_r_micr() & MIDR_DATA_MASK;
+	return ioc3_r_midr_r() & MIDR_DATA_MASK;
 }
 
 static void ioc3_mdio_write(struct net_device *dev, int phy, int reg, int data)
@@ -1291,7 +1291,6 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	dev->features		= NETIF_F_IP_CSUM;
 #endif
 
-	ioc3_setup_duplex(ip);
 	sw_physid1 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID1);
 	sw_physid2 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID2);
 
@@ -1300,6 +1299,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto out_stop;
 
 	mii_check_media(&ip->mii, 1, 1);
+	ioc3_setup_duplex(ip);
 
 	vendor = (sw_physid1 << 12) | (sw_physid2 >> 4);
 	model  = (sw_physid2 >> 4) & 0x3f;
@@ -1524,7 +1524,7 @@ static void ioc3_get_drvinfo (struct net_device *dev,
 	struct ethtool_drvinfo *info)
 {
 	struct ioc3_private *ip = netdev_priv(dev);
-                                                                                
+
         strcpy (info->driver, IOC3_NAME);
         strcpy (info->version, IOC3_VERSION);
         strcpy (info->bus_info, pci_name(ip->pdev));
@@ -1550,7 +1550,7 @@ static int ioc3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	spin_lock_irq(&ip->ioc3_lock);
 	rc = mii_ethtool_sset(&ip->mii, cmd);
 	spin_unlock_irq(&ip->ioc3_lock);
-                                                                        
+
 	return rc;
 }
 

drivers/net/loopback.c

@@ -214,7 +214,7 @@ struct net_device loopback_dev = {
 	.ethtool_ops		= &loopback_ethtool_ops,
 };
 
-/* Setup and register the of the LOOPBACK device. */
+/* Setup and register the loopback device. */
 int __init loopback_init(void)
 {
 	struct net_device_stats *stats;

drivers/net/tg3.c

@@ -66,8 +66,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.35"
-#define DRV_MODULE_RELDATE	"August 6, 2005"
+#define DRV_MODULE_VERSION	"3.36"
+#define DRV_MODULE_RELDATE	"August 19, 2005"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -8970,6 +8970,8 @@ static int __devinit tg3_phy_probe(struct tg3 *tp)
 		tp->phy_id = hw_phy_id;
 		if (hw_phy_id_masked == PHY_ID_BCM8002)
 			tp->tg3_flags2 |= TG3_FLG2_PHY_SERDES;
+		else
+			tp->tg3_flags2 &= ~TG3_FLG2_PHY_SERDES;
 	} else {
 		if (tp->phy_id != PHY_ID_INVALID) {
 			/* Do nothing, phy ID already set up in

drivers/net/tokenring/Kconfig

@@ -84,7 +84,7 @@ config 3C359
 
 config TMS380TR
 	tristate "Generic TMS380 Token Ring ISA/PCI adapter support"
-	depends on TR && (PCI || ISA)
+	depends on TR && (PCI || ISA && ISA_DMA_API)
 	select FW_LOADER
 	---help---
 	  This driver provides generic support for token ring adapters

drivers/net/wireless/Kconfig

@@ -374,7 +374,7 @@ config PCMCIA_HERMES
 
 config AIRO_CS
 	tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
-	depends on NET_RADIO && PCMCIA
+	depends on NET_RADIO && PCMCIA && (BROKEN || !M32R)
 	---help---
 	  This is the standard Linux driver to support Cisco/Aironet PCMCIA
 	  802.11 wireless cards.  This driver is the same as the Aironet

drivers/parport/Kconfig

@@ -34,7 +34,7 @@ config PARPORT
 
 config PARPORT_PC
 	tristate "PC-style hardware"
-	depends on PARPORT && (!SPARC64 || PCI) && !SPARC32
+	depends on PARPORT && (!SPARC64 || PCI) && !SPARC32 && !M32R
 	---help---
 	  You should say Y here if you have a PC-style parallel port. All
 	  IBM PC compatible computers and some Alphas have PC-style

drivers/pci/hotplug/pciehp.h

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 #ifndef _PCIEHP_H

drivers/pci/hotplug/pciehp_core.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/pciehp_ctrl.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/pciehp_hpc.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/pciehp_pci.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/pciehprm.h

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/pciehprm_acpi.c

@@ -20,7 +20,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <dely.l.sy@intel.com>
+ * Send feedback to <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/pciehprm_nonacpi.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/pciehprm_nonacpi.h

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchp.h

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
  *
  */
 #ifndef _SHPCHP_H

drivers/pci/hotplug/shpchp_core.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchp_ctrl.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchp_hpc.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchp_pci.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchprm.h

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchprm_acpi.c

@@ -20,7 +20,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <dely.l.sy@intel.com>
+ * Send feedback to <kristen.c.accardi@intel.com>
  *
  */