ARM: config: sort select statements alphanumerically

As suggested by Andrew Morton:

  This is a pet peeve of mine.  Any time there's a long list of items
  (header file inclusions, kconfig entries, array initalisers, etc) and
  someone wants to add a new item, they *always* go and stick it at the
  end of the list.

  Guys, don't do this.  Either put the new item into a randomly-chosen
  position or, probably better, alphanumerically sort the list.

lets sort all our select statements alphanumerically.  This commit was
created by the following perl:

while (<>) {
	while (/\\\s*$/) {
		$_ .= <>;
	}
	undef %selects if /^\s*config\s+/;
	if (/^\s+select\s+(\w+).*/) {
		if (defined($selects{$1})) {
			if ($selects{$1} eq $_) {
				print STDERR "Warning: removing duplicated $1 entry\n";
			} else {
				print STDERR "Error: $1 differently selected\n".
					"\tOld: $selects{$1}\n".
					"\tNew: $_\n";
				exit 1;
			}
		}
		$selects{$1} = $_;
		next;
	}
	if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
			  /^endif/ or /^endchoice/)) {
		foreach $k (sort (keys %selects)) {
			print "$selects{$k}";
		}
		undef %selects;
	}
	print;
}
if (%selects) {
	foreach $k (sort (keys %selects)) {
		print "$selects{$k}";
	}
}

It found two duplicates:

Warning: removing duplicated S5P_SETUP_MIPIPHY entry
Warning: removing duplicated HARDIRQS_SW_RESEND entry

and they are identical duplicates, hence the shrinkage in the diffstat
of two lines.

We have four testers reporting success of this change (Tony, Stephen,
Linus and Sekhar.)

Acked-by: Jason Cooper <jason@lakedaemon.net>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/Kconfig

@@ -1,58 +1,57 @@
 config ARM
 	bool
 	default y
+	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
+	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select ARCH_HAVE_CUSTOM_GPIO_H
-	select HAVE_AOUT
-	select HAVE_DMA_API_DEBUG
-	select HAVE_IDE if PCI || ISA || PCMCIA
-	select HAVE_DMA_ATTRS
-	select HAVE_DMA_CONTIGUOUS if MMU
-	select HAVE_MEMBLOCK
-	select RTC_LIB
-	select SYS_SUPPORTS_APM_EMULATION
+	select ARCH_WANT_IPC_PARSE_VERSION
+	select CPU_PM if (SUSPEND || CPU_IDLE)
+	select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN
 	select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
-	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
+	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GENERIC_IRQ_PROBE
+	select GENERIC_IRQ_SHOW
+	select GENERIC_KERNEL_THREAD
+	select GENERIC_PCI_IOMAP
+	select GENERIC_SMP_IDLE_THREAD
+	select GENERIC_STRNCPY_FROM_USER
+	select GENERIC_STRNLEN_USER
+	select HARDIRQS_SW_RESEND
+	select HAVE_AOUT
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_SYSCALL_TRACEPOINTS
-	select HAVE_KPROBES if !XIP_KERNEL
-	select HAVE_KRETPROBES if (HAVE_KPROBES)
-	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
-	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
+	select HAVE_BPF_JIT
+	select HAVE_C_RECORDMCOUNT
+	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_DMA_API_DEBUG
+	select HAVE_DMA_ATTRS
+	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
+	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
 	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
-	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
+	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_DEBUG_KMEMLEAK
+	select HAVE_GENERIC_HARDIRQS
+	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
+	select HAVE_IDE if PCI || ISA || PCMCIA
+	select HAVE_IRQ_WORK
 	select HAVE_KERNEL_GZIP
-	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_LZMA
+	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_XZ
-	select HAVE_IRQ_WORK
+	select HAVE_KPROBES if !XIP_KERNEL
+	select HAVE_KRETPROBES if (HAVE_KPROBES)
+	select HAVE_MEMBLOCK
+	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
 	select HAVE_PERF_EVENTS
-	select PERF_USE_VMALLOC
 	select HAVE_REGS_AND_STACK_ACCESS_API
-	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
-	select HAVE_C_RECORDMCOUNT
-	select HAVE_GENERIC_HARDIRQS
-	select HARDIRQS_SW_RESEND
-	select GENERIC_IRQ_PROBE
-	select GENERIC_IRQ_SHOW
+	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
-	select ARCH_WANT_IPC_PARSE_VERSION
-	select HARDIRQS_SW_RESEND
-	select CPU_PM if (SUSPEND || CPU_IDLE)
-	select GENERIC_PCI_IOMAP
-	select HAVE_BPF_JIT
-	select GENERIC_SMP_IDLE_THREAD
 	select KTIME_SCALAR
-	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
-	select GENERIC_STRNCPY_FROM_USER
-	select GENERIC_STRNLEN_USER
-	select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN
-	select GENERIC_KERNEL_THREAD
+	select PERF_USE_VMALLOC
+	select RTC_LIB
+	select SYS_SUPPORTS_APM_EMULATION
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -68,9 +67,9 @@ config NEED_SG_DMA_LENGTH
 	bool
 
 config ARM_DMA_USE_IOMMU
-	select NEED_SG_DMA_LENGTH
-	select ARM_HAS_SG_CHAIN
 	bool
+	select ARM_HAS_SG_CHAIN
+	select NEED_SG_DMA_LENGTH
 
 config HAVE_PWM
 	bool
@@ -262,69 +261,69 @@ choice
 
 config ARCH_MULTIPLATFORM
 	bool "Allow multiple platforms to be selected"
+	depends on MMU
 	select ARM_PATCH_PHYS_VIRT
 	select AUTO_ZRELADDR
 	select COMMON_CLK
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
 	select USE_OF
-	depends on MMU
 
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
-	select ARM_AMBA
 	select ARCH_HAS_CPUFREQ
+	select ARM_AMBA
 	select COMMON_CLK
 	select COMMON_CLK_VERSATILE
+	select GENERIC_CLOCKEVENTS
 	select HAVE_TCM
 	select ICST
-	select GENERIC_CLOCKEVENTS
+	select MULTI_IRQ_HANDLER
+	select NEED_MACH_MEMORY_H
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_FPGA_IRQ
-	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
-	select MULTI_IRQ_HANDLER
 	help
 	  Support for ARM's Integrator platform.
 
 config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
+	select ARM_TIMER_SP804
 	select COMMON_CLK
 	select COMMON_CLK_VERSATILE
-	select ICST
 	select GENERIC_CLOCKEVENTS
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLCD
-	select ARM_TIMER_SP804
 	select GPIO_PL061 if GPIOLIB
+	select ICST
 	select NEED_MACH_MEMORY_H
+	select PLAT_VERSATILE
+	select PLAT_VERSATILE_CLCD
 	help
 	  This enables support for ARM Ltd RealView boards.
 
 config ARCH_VERSATILE
 	bool "ARM Ltd. Versatile family"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_AMBA
+	select ARM_TIMER_SP804
 	select ARM_VIC
 	select CLKDEV_LOOKUP
+	select GENERIC_CLOCKEVENTS
 	select HAVE_MACH_CLKDEV
 	select ICST
-	select GENERIC_CLOCKEVENTS
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLOCK
 	select PLAT_VERSATILE_CLCD
+	select PLAT_VERSATILE_CLOCK
 	select PLAT_VERSATILE_FPGA_IRQ
-	select ARM_TIMER_SP804
 	help
 	  This enables support for ARM Ltd Versatile board.
 
 config ARCH_AT91
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
 	select CLKDEV_LOOKUP
+	select HAVE_CLK
 	select IRQ_DOMAIN
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H if PCCARD
@@ -351,19 +350,19 @@ config ARCH_BCM2835
 
 config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
-	select CPU_ARM720T
 	select ARCH_USES_GETTIMEOFFSET
-	select COMMON_CLK
 	select CLKDEV_LOOKUP
+	select COMMON_CLK
+	select CPU_ARM720T
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for Cirrus Logic 711x/721x/731x based boards.
 
 config ARCH_CNS3XXX
 	bool "Cavium Networks CNS3XXX family"
+	select ARM_GIC
 	select CPU_V6K
 	select GENERIC_CLOCKEVENTS
-	select ARM_GIC
 	select MIGHT_HAVE_CACHE_L2X0
 	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
@@ -372,20 +371,20 @@ config ARCH_CNS3XXX
 
 config ARCH_GEMINI
 	bool "Cortina Systems Gemini"
-	select CPU_FA526
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_USES_GETTIMEOFFSET
+	select CPU_FA526
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
 config ARCH_SIRF
 	bool "CSR SiRF"
-	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
-	select GENERIC_CLOCKEVENTS
 	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select MIGHT_HAVE_CACHE_L2X0
+	select NO_IOPORT
 	select PINCTRL
 	select PINCTRL_SIRF
 	select USE_OF
@@ -394,12 +393,12 @@ config ARCH_SIRF
 
 config ARCH_EBSA110
 	bool "EBSA-110"
+	select ARCH_USES_GETTIMEOFFSET
 	select CPU_SA110
 	select ISA
-	select NO_IOPORT
-	select ARCH_USES_GETTIMEOFFSET
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
+	select NO_IOPORT
 	help
 	  This is an evaluation board for the StrongARM processor available
 	  from Digital. It has limited hardware on-board, including an
@@ -408,13 +407,13 @@ config ARCH_EBSA110
 
 config ARCH_EP93XX
 	bool "EP93xx-based"
-	select CPU_ARM920T
+	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_USES_GETTIMEOFFSET
 	select ARM_AMBA
 	select ARM_VIC
 	select CLKDEV_LOOKUP
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_USES_GETTIMEOFFSET
+	select CPU_ARM920T
 	select NEED_MACH_MEMORY_H
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
@@ -433,10 +432,10 @@ config ARCH_FOOTBRIDGE
 
 config ARCH_MXC
 	bool "Freescale MXC/iMX-based"
-	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
@@ -446,11 +445,11 @@ config ARCH_MXC
 
 config ARCH_MXS
 	bool "Freescale MXS-based"
-	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select COMMON_CLK
+	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK_PREPARE
 	select MULTI_IRQ_HANDLER
 	select PINCTRL
@@ -461,43 +460,43 @@ config ARCH_MXS
 
 config ARCH_NETX
 	bool "Hilscher NetX based"
+	select ARM_VIC
 	select CLKSRC_MMIO
 	select CPU_ARM926T
-	select ARM_VIC
 	select GENERIC_CLOCKEVENTS
 	help
 	  This enables support for systems based on the Hilscher NetX Soc
 
 config ARCH_H720X
 	bool "Hynix HMS720x-based"
+	select ARCH_USES_GETTIMEOFFSET
 	select CPU_ARM720T
 	select ISA_DMA_API
-	select ARCH_USES_GETTIMEOFFSET
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
 config ARCH_IOP13XX
 	bool "IOP13xx-based"
 	depends on MMU
-	select CPU_XSC3
-	select PLAT_IOP
-	select PCI
 	select ARCH_SUPPORTS_MSI
-	select VMSPLIT_1G
+	select CPU_XSC3
 	select NEED_MACH_MEMORY_H
 	select NEED_RET_TO_USER
+	select PCI
+	select PLAT_IOP
+	select VMSPLIT_1G
 	help
 	  Support for Intel's IOP13XX (XScale) family of processors.
 
 config ARCH_IOP32X
 	bool "IOP32x-based"
 	depends on MMU
+	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select NEED_MACH_GPIO_H
 	select NEED_RET_TO_USER
-	select PLAT_IOP
 	select PCI
-	select ARCH_REQUIRE_GPIOLIB
+	select PLAT_IOP
 	help
 	  Support for Intel's 80219 and IOP32X (XScale) family of
 	  processors.
@@ -505,12 +504,12 @@ config ARCH_IOP32X
 config ARCH_IOP33X
 	bool "IOP33x-based"
 	depends on MMU
+	select ARCH_REQUIRE_GPIOLIB
 	select CPU_XSCALE
 	select NEED_MACH_GPIO_H
 	select NEED_RET_TO_USER
-	select PLAT_IOP
 	select PCI
-	select ARCH_REQUIRE_GPIOLIB
+	select PLAT_IOP
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
 
@@ -518,20 +517,20 @@ config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	depends on MMU
 	select ARCH_HAS_DMA_SET_COHERENT_MASK
+	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select CPU_XSCALE
-	select ARCH_REQUIRE_GPIOLIB
+	select DMABOUNCE if PCI
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
 	select NEED_MACH_IO_H
-	select DMABOUNCE if PCI
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
 config ARCH_DOVE
 	bool "Marvell Dove"
-	select CPU_V7
 	select ARCH_REQUIRE_GPIOLIB
+	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
 	select PLAT_ORION_LEGACY
@@ -541,10 +540,10 @@ config ARCH_DOVE
 
 config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
-	select CPU_FEROCEON
-	select PCI
 	select ARCH_REQUIRE_GPIOLIB
+	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
+	select PCI
 	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Kirkwood series SoCs:
@@ -552,25 +551,25 @@ config ARCH_KIRKWOOD
 
 config ARCH_LPC32XX
 	bool "NXP LPC32XX"
-	select CLKSRC_MMIO
-	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_IDE
 	select ARM_AMBA
-	select USB_ARCH_HAS_OHCI
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
-	select USE_OF
+	select HAVE_IDE
 	select HAVE_PWM
+	select USB_ARCH_HAS_OHCI
+	select USE_OF
 	help
 	  Support for the NXP LPC32XX family of processors
 
 config ARCH_MV78XX0
 	bool "Marvell MV78xx0"
-	select CPU_FEROCEON
-	select PCI
 	select ARCH_REQUIRE_GPIOLIB
+	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
+	select PCI
 	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell MV78xx0 series SoCs:
@@ -579,10 +578,10 @@ config ARCH_MV78XX0
 config ARCH_ORION5X
 	bool "Marvell Orion"
 	depends on MMU
-	select CPU_FEROCEON
-	select PCI
 	select ARCH_REQUIRE_GPIOLIB
+	select CPU_FEROCEON
 	select GENERIC_CLOCKEVENTS
+	select PCI
 	select PLAT_ORION_LEGACY
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
@@ -594,33 +593,33 @@ config ARCH_MMP
 	depends on MMU
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select GENERIC_ALLOCATOR
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
 	select IRQ_DOMAIN
+	select NEED_MACH_GPIO_H
 	select PLAT_PXA
 	select SPARSE_IRQ
-	select GENERIC_ALLOCATOR
-	select NEED_MACH_GPIO_H
 	help
 	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
-	select CPU_ARM922T
 	select ARCH_REQUIRE_GPIOLIB
-	select NEED_MACH_MEMORY_H
 	select CLKSRC_MMIO
+	select CPU_ARM922T
 	select GENERIC_CLOCKEVENTS
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 	  System-on-Chip devices.
 
 config ARCH_W90X900
 	bool "Nuvoton W90X900 CPU"
-	select CPU_ARM926T
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
 	help
 	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
@@ -633,16 +632,16 @@ config ARCH_W90X900
 
 config ARCH_TEGRA
 	bool "NVIDIA Tegra"
+	select ARCH_HAS_CPUFREQ
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
+	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
 	select HAVE_CLK
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
-	select ARCH_HAS_CPUFREQ
 	select USE_OF
-	select COMMON_CLK
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
 	  Tegra 6xx and Tegra 2 series).
@@ -650,29 +649,29 @@ config ARCH_TEGRA
 config ARCH_PXA
 	bool "PXA2xx/PXA3xx-based"
 	depends on MMU
-	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
+	select ARCH_MTD_XIP
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_CPU_SUSPEND if PM
+	select AUTO_ZRELADDR
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
-	select PLAT_PXA
-	select SPARSE_IRQ
-	select AUTO_ZRELADDR
-	select MULTI_IRQ_HANDLER
-	select ARM_CPU_SUSPEND if PM
 	select HAVE_IDE
+	select MULTI_IRQ_HANDLER
 	select NEED_MACH_GPIO_H
+	select PLAT_PXA
+	select SPARSE_IRQ
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
 config ARCH_MSM
 	bool "Qualcomm MSM"
-	select HAVE_CLK
-	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
 	help
 	  Support for Qualcomm MSM/QSD based systems.  This runs on the
 	  apps processor of the MSM/QSD and depends on a shared memory
@@ -682,50 +681,50 @@ config ARCH_MSM
 
 config ARCH_SHMOBILE
 	bool "Renesas SH-Mobile / R-Mobile"
-	select HAVE_CLK
 	select CLKDEV_LOOKUP
+	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
 	select HAVE_MACH_CLKDEV
 	select HAVE_SMP
-	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_CACHE_L2X0
-	select NO_IOPORT
-	select SPARSE_IRQ
 	select MULTI_IRQ_HANDLER
-	select PM_GENERIC_DOMAINS if PM
 	select NEED_MACH_MEMORY_H
+	select NO_IOPORT
+	select PM_GENERIC_DOMAINS if PM
+	select SPARSE_IRQ
 	help
 	  Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
 
 config ARCH_RPC
 	bool "RiscPC"
 	select ARCH_ACORN
-	select FIQ
 	select ARCH_MAY_HAVE_PC_FDC
-	select HAVE_PATA_PLATFORM
-	select ISA_DMA_API
-	select NO_IOPORT
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_USES_GETTIMEOFFSET
+	select FIQ
 	select HAVE_IDE
+	select HAVE_PATA_PLATFORM
+	select ISA_DMA_API
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
+	select NO_IOPORT
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
 
 config ARCH_SA1100
 	bool "SA1100-based"
-	select CLKSRC_MMIO
-	select CPU_SA1100
-	select ISA
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
+	select ARCH_MTD_XIP
+	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_SPARSEMEM_ENABLE
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select CPU_FREQ
+	select CPU_SA1100
 	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
-	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_IDE
+	select ISA
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	select SPARSE_IRQ
@@ -734,14 +733,14 @@ config ARCH_SA1100
 
 config ARCH_S3C24XX
 	bool "Samsung S3C24XX SoCs"
-	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
-	select HAVE_CLK
-	select CLKDEV_LOOKUP
 	select ARCH_USES_GETTIMEOFFSET
+	select CLKDEV_LOOKUP
+	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_IO_H
 	help
@@ -752,38 +751,38 @@ config ARCH_S3C24XX
 
 config ARCH_S3C64XX
 	bool "Samsung S3C64XX"
-	select PLAT_SAMSUNG
-	select CPU_V6
+	select ARCH_HAS_CPUFREQ
+	select ARCH_REQUIRE_GPIOLIB
+	select ARCH_USES_GETTIMEOFFSET
 	select ARM_VIC
+	select CLKDEV_LOOKUP
+	select CPU_V6
 	select HAVE_CLK
+	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_TCM
-	select CLKDEV_LOOKUP
+	select NEED_MACH_GPIO_H
 	select NO_IOPORT
-	select ARCH_USES_GETTIMEOFFSET
-	select ARCH_HAS_CPUFREQ
-	select ARCH_REQUIRE_GPIOLIB
+	select PLAT_SAMSUNG
+	select S3C_DEV_NAND
+	select S3C_GPIO_TRACK
 	select SAMSUNG_CLKSRC
+	select SAMSUNG_GPIOLIB_4BIT
 	select SAMSUNG_IRQ_VIC_TIMER
-	select S3C_GPIO_TRACK
-	select S3C_DEV_NAND
 	select USB_ARCH_HAS_OHCI
-	select SAMSUNG_GPIOLIB_4BIT
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select NEED_MACH_GPIO_H
 	help
 	  Samsung S3C64XX series based systems
 
 config ARCH_S5P64X0
 	bool "Samsung S5P6440 S5P6450"
-	select CPU_V6
-	select GENERIC_GPIO
-	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select CPU_V6
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
 	help
@@ -792,32 +791,32 @@ config ARCH_S5P64X0
 
 config ARCH_S5PC100
 	bool "Samsung S5PC100"
-	select GENERIC_GPIO
-	select HAVE_CLK
+	select ARCH_USES_GETTIMEOFFSET
 	select CLKDEV_LOOKUP
 	select CPU_V7
-	select ARCH_USES_GETTIMEOFFSET
+	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
 	help
 	  Samsung S5PC100 series based systems
 
 config ARCH_S5PV210
 	bool "Samsung S5PV210/S5PC110"
-	select CPU_V7
-	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select GENERIC_GPIO
-	select HAVE_CLK
+	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select ARCH_HAS_CPUFREQ
+	select CPU_V7
 	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	help
@@ -825,17 +824,17 @@ config ARCH_S5PV210
 
 config ARCH_EXYNOS
 	bool "SAMSUNG EXYNOS"
-	select CPU_V7
-	select ARCH_SPARSEMEM_ENABLE
+	select ARCH_HAS_CPUFREQ
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select GENERIC_GPIO
-	select HAVE_CLK
+	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
-	select ARCH_HAS_CPUFREQ
+	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select HAVE_S3C_RTC if RTC_CLASS
+	select GENERIC_GPIO
+	select HAVE_CLK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select HAVE_S3C_RTC if RTC_CLASS
 	select NEED_MACH_GPIO_H
 	select NEED_MACH_MEMORY_H
 	help
@@ -843,13 +842,13 @@ config ARCH_EXYNOS
 
 config ARCH_SHARK
 	bool "Shark"
+	select ARCH_USES_GETTIMEOFFSET
 	select CPU_SA110
 	select ISA
 	select ISA_DMA
-	select ZONE_DMA
-	select PCI
-	select ARCH_USES_GETTIMEOFFSET
 	select NEED_MACH_MEMORY_H
+	select PCI
+	select ZONE_DMA
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -857,17 +856,17 @@ config ARCH_SHARK
 config ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on MMU
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select HAVE_TCM
+	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_PATCH_PHYS_VIRT
 	select ARM_VIC
-	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
 	select COMMON_CLK
+	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
-	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_TCM
 	select SPARSE_IRQ
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
@@ -875,12 +874,12 @@ config ARCH_U300
 config ARCH_U8500
 	bool "ST-Ericsson U8500 Series"
 	depends on MMU
-	select CPU_V7
+	select ARCH_HAS_CPUFREQ
+	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
-	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_HAS_CPUFREQ
+	select CPU_V7
+	select GENERIC_CLOCKEVENTS
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -888,52 +887,52 @@ config ARCH_U8500
 
 config ARCH_NOMADIK
 	bool "STMicroelectronics Nomadik"
+	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select ARM_VIC
-	select CPU_ARM926T
 	select COMMON_CLK
+	select CPU_ARM926T
 	select GENERIC_CLOCKEVENTS
+	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
 	select PINCTRL_STN8815
-	select MIGHT_HAVE_CACHE_L2X0
-	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for the Nomadik platform by ST-Ericsson
 
 config ARCH_DAVINCI
 	bool "TI DaVinci"
-	select GENERIC_CLOCKEVENTS
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_REQUIRE_GPIOLIB
-	select ZONE_DMA
-	select HAVE_IDE
 	select CLKDEV_LOOKUP
 	select GENERIC_ALLOCATOR
+	select GENERIC_CLOCKEVENTS
 	select GENERIC_IRQ_CHIP
-	select ARCH_HAS_HOLES_MEMORYMODEL
+	select HAVE_IDE
 	select NEED_MACH_GPIO_H
+	select ZONE_DMA
 	help
 	  Support for TI's DaVinci platform.
 
 config ARCH_OMAP
 	bool "TI OMAP"
 	depends on MMU
-	select HAVE_CLK
-	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_REQUIRE_GPIOLIB
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
-	select ARCH_HAS_HOLES_MEMORYMODEL
+	select HAVE_CLK
 	select NEED_MACH_GPIO_H
 	help
 	  Support for TI's OMAP platform (OMAP1/2/3/4).
 
 config PLAT_SPEAR
 	bool "ST SPEAr"
-	select ARM_AMBA
 	select ARCH_REQUIRE_GPIOLIB
+	select ARM_AMBA
 	select CLKDEV_LOOKUP
-	select COMMON_CLK
 	select CLKSRC_MMIO
+	select COMMON_CLK
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
 	help
@@ -941,25 +940,25 @@ config PLAT_SPEAR
 
 config ARCH_VT8500
 	bool "VIA/WonderMedia 85xx"
-	select CPU_ARM926T
-	select GENERIC_GPIO
 	select ARCH_HAS_CPUFREQ
-	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
-	select USE_OF
+	select CLKDEV_LOOKUP
 	select COMMON_CLK
+	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_GPIO
 	select HAVE_CLK
-	select CLKDEV_LOOKUP
+	select USE_OF
 	help
 	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
 
 config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform"
+	select ARM_AMBA
+	select ARM_GIC
+	select CLKDEV_LOOKUP
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
-	select ARM_GIC
-	select ARM_AMBA
 	select ICST
 	select MIGHT_HAVE_CACHE_L2X0
 	select USE_OF
@@ -974,33 +973,33 @@ comment "CPU Core family selection"
 
 config ARCH_MULTI_V4
 	bool "ARMv4 based platforms (FA526, StrongARM)"
-	select ARCH_MULTI_V4_V5
 	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
 
 config ARCH_MULTI_V4T
 	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
-	select ARCH_MULTI_V4_V5
 	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
 
 config ARCH_MULTI_V5
 	bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
-	select ARCH_MULTI_V4_V5
 	depends on !ARCH_MULTI_V6_V7
+	select ARCH_MULTI_V4_V5
 
 config ARCH_MULTI_V4_V5
 	bool
 
 config ARCH_MULTI_V6
 	bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
-	select CPU_V6
 	select ARCH_MULTI_V6_V7
+	select CPU_V6
 
 config ARCH_MULTI_V7
 	bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
-	select CPU_V7
-	select ARCH_VEXPRESS
 	default y
 	select ARCH_MULTI_V6_V7
+	select ARCH_VEXPRESS
+	select CPU_V7
 
 config ARCH_MULTI_V6_V7
 	bool
@@ -1137,9 +1136,9 @@ config PLAT_IOP
 config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
+	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
-	select COMMON_CLK
 
 config PLAT_ORION_LEGACY
 	bool
@@ -1497,8 +1496,8 @@ config SMP
 	depends on GENERIC_CLOCKEVENTS
 	depends on HAVE_SMP
 	depends on MMU
-	select USE_GENERIC_SMP_HELPERS
 	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
+	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1857,9 +1856,9 @@ menu "Boot options"
 
 config USE_OF
 	bool "Flattened Device Tree support"
+	select IRQ_DOMAIN
 	select OF
 	select OF_EARLY_FLATTREE
-	select IRQ_DOMAIN
 	help
 	  Include support for flattened device tree machine descriptions.
 
@@ -2141,8 +2140,8 @@ config CPU_FREQ_PXA
 	bool
 	depends on CPU_FREQ && ARCH_PXA && PXA25x
 	default y
-	select CPU_FREQ_TABLE
 	select CPU_FREQ_DEFAULT_GOV_USERSPACE
+	select CPU_FREQ_TABLE
 
 config CPU_FREQ_S3C
 	bool

arch/arm/common/Kconfig

@@ -1,15 +1,15 @@
 config ARM_GIC
+	bool
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
-	bool
 
 config GIC_NON_BANKED
 	bool
 
 config ARM_VIC
+	bool
 	select IRQ_DOMAIN
 	select MULTI_IRQ_HANDLER
-	bool
 
 config ARM_VIC_NR
 	int

arch/arm/mach-at91/Kconfig

@@ -19,8 +19,8 @@ config AT91_SAM9G45_RESET
 
 config SOC_AT91SAM9
 	bool
-	select GENERIC_CLOCKEVENTS
 	select CPU_ARM926T
+	select GENERIC_CLOCKEVENTS
 
 menu "Atmel AT91 System-on-Chip"
 
@@ -28,66 +28,66 @@ comment "Atmel AT91 Processor"
 
 config SOC_AT91SAM9
 	bool
+	select AT91_SAM9_SMC
+	select AT91_SAM9_TIME
 	select CPU_ARM926T
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
-	select AT91_SAM9_TIME
-	select AT91_SAM9_SMC
 
 config SOC_AT91RM9200
 	bool "AT91RM9200"
 	select CPU_ARM920T
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_DBGU0
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
 
 config SOC_AT91SAM9260
 	bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_NET_MACB
+	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
 	  or AT91SAM9G20 SoC.
 
 config SOC_AT91SAM9261
 	bool "AT91SAM9261 or AT91SAM9G10"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
 
 config SOC_AT91SAM9263
 	bool "AT91SAM9263"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU1
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
+	select SOC_AT91SAM9
 
 config SOC_AT91SAM9RL
 	bool "AT91SAM9RL"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	select SOC_AT91SAM9
 
 config SOC_AT91SAM9G45
 	bool "AT91SAM9G45 or AT91SAM9M10 families"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU1
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
+	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
 	  This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
 
 config SOC_AT91SAM9X5
 	bool "AT91SAM9x5 family"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
+	select SOC_AT91SAM9
 	help
 	  Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
 	  This means that your SAM9 name finishes with a '5' (except if it is
@@ -97,9 +97,9 @@ config SOC_AT91SAM9X5
 
 config SOC_AT91SAM9N12
 	bool "AT91SAM9N12 family"
-	select SOC_AT91SAM9
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	select SOC_AT91SAM9
 	help
 	  Select this if you are using Atmel's AT91SAM9N12 SoC.
 
@@ -144,9 +144,9 @@ config ARCH_AT91SAM9G45
 config ARCH_AT91X40
 	bool "AT91x40"
 	depends on !MMU
+	select ARCH_USES_GETTIMEOFFSET
 	select MULTI_IRQ_HANDLER
 	select SPARSE_IRQ
-	select ARCH_USES_GETTIMEOFFSET
 
 endchoice
 

arch/arm/mach-clps711x/Kconfig

@@ -23,9 +23,9 @@ config ARCH_CLEP7312
 
 config ARCH_EDB7211
 	bool "EDB7211"
-	select ISA
-	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_SELECT_MEMORY_MODEL
+	select ARCH_SPARSEMEM_ENABLE
+	select ISA
 	help
 	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
 	  evaluation board.

arch/arm/mach-davinci/Kconfig

@@ -4,12 +4,12 @@ config AINTC
 	bool
 
 config CP_INTC
-	select IRQ_DOMAIN
 	bool
+	select IRQ_DOMAIN
 
 config ARCH_DAVINCI_DMx
-	select CPU_ARM926T
 	bool
+	select CPU_ARM926T
 
 menu "TI DaVinci Implementations"
 
@@ -32,19 +32,19 @@ config ARCH_DAVINCI_DM646x
 
 config ARCH_DAVINCI_DA830
 	bool "DA830/OMAP-L137/AM17x based system"
-	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
 	select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
+	select CP_INTC
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138/AM18x based system"
-	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
 	select ARCH_HAS_CPUFREQ
+	select CP_INTC
 
 config ARCH_DAVINCI_DA8XX
-	select CPU_ARM926T
 	bool
+	select CPU_ARM926T
 
 config ARCH_DAVINCI_DM365
 	bool "DaVinci 365 based system"
@@ -52,9 +52,9 @@ config ARCH_DAVINCI_DM365
 	select ARCH_DAVINCI_DMx
 
 config ARCH_DAVINCI_TNETV107X
+	bool "TNETV107X based system"
 	select CPU_V6
 	select CP_INTC
-	bool "TNETV107X based system"
 
 comment "DaVinci Board Type"
 
@@ -103,9 +103,9 @@ config MACH_DAVINCI_DM6467_EVM
 	bool "TI DM6467 EVM"
 	default ARCH_DAVINCI_DM646x
 	depends on ARCH_DAVINCI_DM646x
-	select MACH_DAVINCI_DM6467TEVM
 	select EEPROM_AT24
 	select I2C
+	select MACH_DAVINCI_DM6467TEVM
 	help
 	  Configure this option to specify the whether the board used
 	  for development is a DM6467 EVM
@@ -127,8 +127,8 @@ config MACH_DAVINCI_DA830_EVM
 	bool "TI DA830/OMAP-L137/AM17x Reference Platform"
 	default ARCH_DAVINCI_DA830
 	depends on ARCH_DAVINCI_DA830
-	select GPIO_PCF857X
 	select EEPROM_AT24
+	select GPIO_PCF857X
 	select I2C
 	help
 	  Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.

arch/arm/mach-exynos/Kconfig

@@ -31,11 +31,11 @@ config CPU_EXYNOS4210
 	bool "SAMSUNG EXYNOS4210"
 	default y
 	depends on ARCH_EXYNOS4
-	select SAMSUNG_DMADEV
 	select ARM_CPU_SUSPEND if PM
+	select PM_GENERIC_DOMAINS
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
-	select PM_GENERIC_DOMAINS
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS4210 CPU support
 
@@ -43,9 +43,9 @@ config SOC_EXYNOS4212
 	bool "SAMSUNG EXYNOS4212"
 	default y
 	depends on ARCH_EXYNOS4
-	select SAMSUNG_DMADEV
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS4212 SoC support
 
@@ -61,9 +61,9 @@ config SOC_EXYNOS5250
 	bool "SAMSUNG EXYNOS5250"
 	default y
 	depends on ARCH_EXYNOS5
-	select SAMSUNG_DMADEV
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
+	select SAMSUNG_DMADEV
 	help
 	  Enable EXYNOS5250 SoC support
 
@@ -189,71 +189,71 @@ config MACH_SMDKC210
 config MACH_SMDKV310
 	bool "SMDKV310"
 	select CPU_EXYNOS4210
-	select S5P_DEV_FIMD0
+	select EXYNOS4_DEV_AHCI
+	select EXYNOS4_DEV_USB_OHCI
+	select EXYNOS4_SETUP_FIMD0
+	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_KEYPAD
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
+	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select EXYNOS_DEV_SYSMMU
+	select S3C24XX_PWM
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S3C_DEV_I2C1
 	select S3C_DEV_RTC
+	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
-	select S3C_DEV_I2C1
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
 	select S5P_DEV_G2D
 	select S5P_DEV_I2C_HDMIPHY
 	select S5P_DEV_JPEG
 	select S5P_DEV_MFC
 	select S5P_DEV_TV
 	select S5P_DEV_USB_EHCI
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select S3C_DEV_USB_HSOTG
 	select SAMSUNG_DEV_BACKLIGHT
-	select EXYNOS_DEV_DRM
-	select EXYNOS_DEV_SYSMMU
-	select EXYNOS4_DEV_AHCI
 	select SAMSUNG_DEV_KEYPAD
-	select EXYNOS_DEV_DMA
 	select SAMSUNG_DEV_PWM
-	select EXYNOS4_DEV_USB_OHCI
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_KEYPAD
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
-	select S3C24XX_PWM
 	help
 	  Machine support for Samsung SMDKV310
 
 config MACH_ARMLEX4210
 	bool "ARMLEX4210"
 	select CPU_EXYNOS4210
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
+	select EXYNOS4_DEV_AHCI
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS_DEV_DMA
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
-	select EXYNOS4_DEV_AHCI
-	select EXYNOS_DEV_DMA
-	select EXYNOS4_SETUP_SDHCI
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
 	help
 	  Machine support for Samsung ARMLEX4210 based on EXYNOS4210
 
 config MACH_UNIVERSAL_C210
 	bool "Mobile UNIVERSAL_C210 Board"
-	select CPU_EXYNOS4210
-	select S5P_HRT
 	select CLKSRC_MMIO
+	select CPU_EXYNOS4210
+	select EXYNOS4_SETUP_FIMC
+	select EXYNOS4_SETUP_FIMD0
+	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_I2C3
+	select EXYNOS4_SETUP_I2C5
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
+	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select EXYNOS_DEV_SYSMMU
 	select HAVE_SCHED_CLOCK
-	select S5P_GPIO_INT
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
-	select S5P_DEV_FIMC3
-	select S5P_DEV_G2D
-	select S5P_DEV_CSIS0
-	select S5P_DEV_JPEG
-	select S5P_DEV_FIMD0
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
@@ -261,21 +261,21 @@ config MACH_UNIVERSAL_C210
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
 	select S3C_DEV_USB_HSOTG
+	select S5P_DEV_CSIS0
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
+	select S5P_DEV_G2D
 	select S5P_DEV_I2C_HDMIPHY
+	select S5P_DEV_JPEG
 	select S5P_DEV_MFC
 	select S5P_DEV_ONENAND
 	select S5P_DEV_TV
-	select EXYNOS_DEV_SYSMMU
-	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_DRM
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_I2C3
-	select EXYNOS4_SETUP_I2C5
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_FIMC
+	select S5P_GPIO_INT
+	select S5P_HRT
 	select S5P_SETUP_MIPIPHY
-	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung Mobile Universal S5PC210 Reference
 	  Board.
@@ -283,10 +283,16 @@ config MACH_UNIVERSAL_C210
 config MACH_NURI
 	bool "Mobile NURI Board"
 	select CPU_EXYNOS4210
-	select S5P_GPIO_INT
-	select S3C_DEV_WDT
-	select S3C_DEV_RTC
-	select S5P_DEV_FIMD0
+	select EXYNOS4_SETUP_FIMC
+	select EXYNOS4_SETUP_FIMD0
+	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_I2C3
+	select EXYNOS4_SETUP_I2C5
+	select EXYNOS4_SETUP_I2C6
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
+	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
@@ -294,41 +300,42 @@ config MACH_NURI
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C5
 	select S3C_DEV_I2C6
+	select S3C_DEV_RTC
 	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_WDT
 	select S5P_DEV_CSIS0
-	select S5P_DEV_JPEG
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
 	select S5P_DEV_G2D
+	select S5P_DEV_JPEG
 	select S5P_DEV_MFC
 	select S5P_DEV_USB_EHCI
+	select S5P_GPIO_INT
 	select S5P_SETUP_MIPIPHY
-	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_DRM
-	select EXYNOS4_SETUP_FIMC
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_I2C3
-	select EXYNOS4_SETUP_I2C5
-	select EXYNOS4_SETUP_I2C6
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
-	select S5P_SETUP_MIPIPHY
-	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_PWM
 	help
 	  Machine support for Samsung Mobile NURI Board.
 
 config MACH_ORIGEN
 	bool "ORIGEN"
 	select CPU_EXYNOS4210
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
+	select EXYNOS4_DEV_USB_OHCI
+	select EXYNOS4_SETUP_FIMD0
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
+	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select EXYNOS_DEV_SYSMMU
+	select S3C24XX_PWM
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
+	select S3C_DEV_RTC
 	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_WDT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
@@ -342,14 +349,6 @@ config MACH_ORIGEN
 	select S5P_DEV_USB_EHCI
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
-	select EXYNOS_DEV_DRM
-	select EXYNOS_DEV_SYSMMU
-	select EXYNOS_DEV_DMA
-	select EXYNOS4_DEV_USB_OHCI
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
-	select S3C24XX_PWM
 	help
 	  Machine support for ORIGEN based on Samsung EXYNOS4210
 
@@ -357,7 +356,17 @@ comment "EXYNOS4212 Boards"
 
 config MACH_SMDK4212
 	bool "SMDK4212"
-	select SOC_EXYNOS4212
+	select EXYNOS4_SETUP_FIMD0
+	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_I2C3
+	select EXYNOS4_SETUP_I2C7
+	select EXYNOS4_SETUP_KEYPAD
+	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
+	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select EXYNOS_DEV_SYSMMU
+	select S3C24XX_PWM
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
 	select S3C_DEV_I2C1
@@ -375,17 +384,7 @@ config MACH_SMDK4212
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
-	select EXYNOS_DEV_SYSMMU
-	select EXYNOS_DEV_DMA
-	select EXYNOS_DEV_DRM
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_I2C3
-	select EXYNOS4_SETUP_I2C7
-	select EXYNOS4_SETUP_KEYPAD
-	select EXYNOS4_SETUP_SDHCI
-	select EXYNOS4_SETUP_USB_PHY
-	select S3C24XX_PWM
+	select SOC_EXYNOS4212
 	help
 	  Machine support for Samsung SMDK4212
 
@@ -393,8 +392,8 @@ comment "EXYNOS4412 Boards"
 
 config MACH_SMDK4412
 	bool "SMDK4412"
-	select SOC_EXYNOS4412
 	select MACH_SMDK4212
+	select SOC_EXYNOS4412
 	help
 	  Machine support for Samsung SMDK4412
 endif
@@ -404,12 +403,12 @@ comment "Flattened Device Tree based board for EXYNOS SoCs"
 config MACH_EXYNOS4_DT
 	bool "Samsung Exynos4 Machine using device tree"
 	depends on ARCH_EXYNOS4
-	select CPU_EXYNOS4210
-	select USE_OF
 	select ARM_AMBA
+	select CPU_EXYNOS4210
 	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
 	select PINCTRL
 	select PINCTRL_EXYNOS4
+	select USE_OF
 	help
 	  Machine support for Samsung Exynos4 machine with device tree enabled.
 	  Select this if a fdt blob is available for the Exynos4 SoC based board.
@@ -419,9 +418,9 @@ config MACH_EXYNOS4_DT
 config MACH_EXYNOS5_DT
 	bool "SAMSUNG EXYNOS5 Machine using device tree"
 	depends on ARCH_EXYNOS5
+	select ARM_AMBA
 	select SOC_EXYNOS5250
 	select USE_OF
-	select ARM_AMBA
 	help
 	  Machine support for Samsung EXYNOS5 machine with device tree enabled.
 	  Select this if a fdt blob is available for the EXYNOS5 SoC based board.

arch/arm/mach-footbridge/Kconfig

@@ -91,7 +91,7 @@ config FOOTBRIDGE_ADDIN
 
 # EBSA285 board in either host or addin mode
 config ARCH_EBSA285
-	select ARCH_MAY_HAVE_PC_FDC
 	bool
+	select ARCH_MAY_HAVE_PC_FDC
 
 endif

arch/arm/mach-h720x/Kconfig

@@ -12,9 +12,9 @@ config ARCH_H7201
 
 config ARCH_H7202
 	bool "hms30c7202"
+	depends on ARCH_H720X
 	select CPU_H7202
 	select ZONE_DMA
-	depends on ARCH_H720X
 	help
 	  Say Y here if you are using the Hynix HMS30C7202 Reference Board
 

arch/arm/mach-imx/Kconfig

@@ -41,68 +41,68 @@ config SOC_IMX1
 
 config SOC_IMX21
 	bool
-	select MACH_MX21
-	select CPU_ARM926T
 	select COMMON_CLK
+	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
+	select MACH_MX21
 	select MXC_AVIC
 
 config SOC_IMX25
 	bool
 	select ARCH_MX25
+	select ARCH_MXC_IOMUX_V3
 	select COMMON_CLK
 	select CPU_ARM926T
 	select HAVE_CAN_FLEXCAN if CAN
-	select ARCH_MXC_IOMUX_V3
 	select MXC_AVIC
 
 config SOC_IMX27
 	bool
-	select MACH_MX27
-	select CPU_ARM926T
 	select COMMON_CLK
+	select CPU_ARM926T
 	select IMX_HAVE_IOMUX_V1
+	select MACH_MX27
 	select MXC_AVIC
 
 config SOC_IMX31
 	bool
+	select COMMON_CLK
 	select CPU_V6
 	select IMX_HAVE_PLATFORM_MXC_RNGA
 	select MXC_AVIC
-	select COMMON_CLK
 	select SMP_ON_UP if SMP
 
 config SOC_IMX35
 	bool
-	select CPU_V6K
 	select ARCH_MXC_IOMUX_V3
 	select COMMON_CLK
+	select CPU_V6K
+	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_EPIT
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
-	select HAVE_CAN_FLEXCAN if CAN
 
 config SOC_IMX5
-	select CPU_V7
-	select MXC_TZIC
-	select COMMON_CLK
-	select ARCH_MXC_IOMUX_V3
+	bool
 	select ARCH_HAS_CPUFREQ
 	select ARCH_MX5
-	bool
+	select ARCH_MXC_IOMUX_V3
+	select COMMON_CLK
+	select CPU_V7
+	select MXC_TZIC
 
 config SOC_IMX50
 	bool
-	select SOC_IMX5
 	select ARCH_MX50
+	select SOC_IMX5
 
 config	SOC_IMX51
 	bool
-	select SOC_IMX5
 	select ARCH_MX5
 	select ARCH_MX51
 	select PINCTRL
 	select PINCTRL_IMX51
+	select SOC_IMX5
 
 if ARCH_IMX_V4_V5
 
@@ -112,10 +112,10 @@ config MACH_MXLADS
 
 config ARCH_MX1ADS
 	bool "MX1ADS platform"
-	select MACH_MXLADS
-	select SOC_IMX1
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select MACH_MXLADS
+	select SOC_IMX1
 	help
 	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
 
@@ -127,9 +127,9 @@ config MACH_SCB9328
 
 config MACH_APF9328
 	bool "APF9328"
-	select SOC_IMX1
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX1
 	help
 	  Say Yes here if you are using the Armadeus APF9328 development board
 
@@ -137,11 +137,11 @@ comment "MX21 platforms:"
 
 config MACH_MX21ADS
 	bool "MX21ADS platform"
-	select SOC_IMX21
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select SOC_IMX21
 	help
 	  Include support for MX21ADS platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -150,22 +150,21 @@ comment "MX25 platforms:"
 
 config MACH_MX25_3DS
 	bool "Support MX25PDK (3DS) Platform"
-	select SOC_IMX25
 	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMXDI_RTC
-	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_FB
+	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select SOC_IMX25
 
 config MACH_EUKREA_CPUIMX25SD
 	bool "Support Eukrea CPUIMX25 Platform"
-	select SOC_IMX25
 	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
@@ -177,6 +176,7 @@ config MACH_EUKREA_CPUIMX25SD
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX25
 
 choice
 	prompt "Baseboard"
@@ -199,20 +199,19 @@ comment "MX27 platforms:"
 
 config MACH_MX27ADS
 	bool "MX27ADS platform"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
+	select SOC_IMX27
 	help
 	  Include support for MX27ADS platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_PCM038
 	bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
@@ -221,6 +220,7 @@ config MACH_PCM038
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
 	help
 	  Include support for phyCORE-i.MX27 (aka pcm038) platform. This
 	  includes specific configurations for the module and its peripherals.
@@ -242,7 +242,6 @@ endchoice
 
 config MACH_CPUIMX27
 	bool "Eukrea CPUIMX27 module"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -251,6 +250,7 @@ config MACH_CPUIMX27
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
 	help
 	  Include support for Eukrea CPUIMX27 platform. This includes
 	  specific configurations for the module and its peripherals.
@@ -292,7 +292,6 @@ endchoice
 
 config MACH_MX27_3DS
 	bool "MX27PDK platform"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_FB
@@ -306,13 +305,13 @@ config MACH_MX27_3DS
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_DEBUG_BOARD
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
 	help
 	  Include support for MX27PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_IMX27_VISSTRIM_M10
 	bool "Vista Silicon i.MX27 Visstrim_m10"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
@@ -321,6 +320,7 @@ config MACH_IMX27_VISSTRIM_M10
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select LEDS_GPIO_REGISTER
+	select SOC_IMX27
 	help
 	  Include support for Visstrim_m10 platform and its different variants.
 	  This includes specific configurations for the board and its
@@ -328,16 +328,15 @@ config MACH_IMX27_VISSTRIM_M10
 
 config MACH_IMX27LITE
 	bool "LogicPD MX27 LITEKIT platform"
-	select SOC_IMX27
-	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IMX_SSI
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX27
 	help
 	  Include support for MX27 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_PCA100
 	bool "Phytec phyCARD-s (pca100)"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_FB
@@ -350,27 +349,28 @@ config MACH_PCA100
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX27
 	help
 	  Include support for phyCARD-s (aka pca100) platform. This
 	  includes specific configurations for the module and its peripherals.
 
 config MACH_MXT_TD60
 	bool "Maxtrack i-MXT TD60"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select SOC_IMX27
 	help
 	  Include support for i-MXT (aka td60) platform. This
 	  includes specific configurations for the module and its peripherals.
 
 config MACH_IMX27IPCAM
 	bool "IMX27 IPCAM platform"
-	select SOC_IMX27
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX27
 	help
 	  Include support for IMX27 IPCAM platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -390,11 +390,11 @@ comment "MX31 platforms:"
 
 config MACH_MX31ADS
 	bool "Support MX31ADS platforms"
-	select SOC_IMX31
+	default y
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_SSI
 	select IMX_HAVE_PLATFORM_IMX_UART
-	default y
+	select SOC_IMX31
 	help
 	  Include support for MX31ADS platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -412,21 +412,19 @@ config MACH_MX31ADS_WM1133_EV1
 
 config MACH_MX31LILLY
 	bool "Support MX31 LILLY-1131 platforms (INCO startec)"
-	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for mx31 based LILLY1131 modules. This includes
 	  specific configurations for the board and its peripherals.
 
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
-	select SOC_IMX31
-	select MXC_ULPI if USB_ULPI
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_MXC_EHCI
@@ -435,13 +433,14 @@ config MACH_MX31LITE
 	select IMX_HAVE_PLATFORM_MXC_RTC
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
+	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_PCM037
 	bool "Support Phytec pcm037 (i.MX31) platforms"
-	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -452,6 +451,7 @@ config MACH_PCM037
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_W1
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for Phytec pcm037 platform. This includes
 	  specific configurations for the board and its peripherals.
@@ -468,8 +468,6 @@ config MACH_PCM037_EET
 
 config MACH_MX31_3DS
 	bool "Support MX31PDK (3DS)"
-	select SOC_IMX31
-	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -481,7 +479,9 @@ config MACH_MX31_3DS
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_DEBUG_BOARD
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for MX31PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -497,7 +497,6 @@ config MACH_MX31_3DS_MXC_NAND_USE_BBT
 
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
-	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -509,22 +508,22 @@ config MACH_MX31MOBOARD
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select LEDS_GPIO_REGISTER
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_QONG
 	bool "Support Dave/DENX QongEVB-LITE platform"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
 	help
 	  Include support for Dave/DENX QongEVB-LITE platform. This includes
 	  specific configurations for the board and its peripherals.
 
 config MACH_ARMADILLO5X0
 	bool "Support Atmark Armadillo-500 Development Base Board"
-	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
@@ -533,23 +532,24 @@ config MACH_ARMADILLO5X0
 	select IMX_HAVE_PLATFORM_MXC_MMC
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX31
 	help
 	  Include support for Atmark Armadillo-500 platform. This includes
 	  specific configurations for the board and its peripherals.
 
 config MACH_KZM_ARM11_01
 	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
-	select SOC_IMX31
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
 	help
 	  Include support for KZM-ARM11-01. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_BUG
 	bool "Support Buglabs BUGBase platform"
-	select SOC_IMX31
-	select IMX_HAVE_PLATFORM_IMX_UART
 	default y
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select SOC_IMX31
 	help
 	  Include support for BUGBase 1.3 platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -565,7 +565,6 @@ comment "MX35 platforms:"
 
 config MACH_PCM043
 	bool "Support Phytec pcm043 (i.MX35) platforms"
-	select SOC_IMX35
 	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
@@ -577,14 +576,13 @@ config MACH_PCM043
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX35
 	help
 	  Include support for Phytec pcm043 platform. This includes
 	  specific configurations for the board and its peripherals.
 
 config MACH_MX35_3DS
 	bool "Support MX35PDK platform"
-	select SOC_IMX35
-	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_FB
@@ -595,13 +593,14 @@ config MACH_MX35_3DS
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_MXC_RTC
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select MXC_DEBUG_BOARD
+	select SOC_IMX35
 	help
 	  Include support for MX35PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_EUKREA_CPUIMX35SD
 	bool "Support Eukrea CPUIMX35 Platform"
-	select SOC_IMX35
 	select IMX_HAVE_PLATFORM_FLEXCAN
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
@@ -611,6 +610,7 @@ config MACH_EUKREA_CPUIMX35SD
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select MXC_ULPI if USB_ULPI
+	select SOC_IMX35
 	help
 	  Include support for Eukrea CPUIMX35 platform. This includes
 	  specific configurations for the board and its peripherals.
@@ -635,16 +635,16 @@ endchoice
 
 config MACH_VPR200
 	bool "Support VPR200 platform"
-	select SOC_IMX35
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_GPIO_KEYS
 	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select SOC_IMX35
 	help
 	  Include support for VPR200 platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -654,11 +654,11 @@ comment "i.MX5 platforms:"
 config MACH_MX50_RDP
 	bool "Support MX50 reference design platform"
 	depends on BROKEN
-	select SOC_IMX50
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select SOC_IMX50
 	help
 	  Include support for MX50 reference design platform (RDP) board. This
 	  includes specific configurations for the board and its peripherals.
@@ -667,15 +667,14 @@ comment "i.MX51 machines:"
 
 config MACH_IMX51_DT
 	bool "Support i.MX51 platforms from device tree"
-	select SOC_IMX51
 	select MACH_MX51_BABBAGE
+	select SOC_IMX51
 	help
 	  Include support for Freescale i.MX51 based platforms
 	  using the device tree for discovery
 
 config MACH_MX51_BABBAGE
 	bool "Support MX51 BABBAGE platforms"
-	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
@@ -683,6 +682,7 @@ config MACH_MX51_BABBAGE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select SOC_IMX51
 	help
 	  Include support for MX51 Babbage platform, also known as MX51EVK in
 	  u-boot. This includes specific configurations for the board and its
@@ -690,27 +690,27 @@ config MACH_MX51_BABBAGE
 
 config MACH_MX51_3DS
 	bool "Support MX51PDK (3DS)"
-	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_KEYPAD
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_DEBUG_BOARD
+	select SOC_IMX51
 	help
 	  Include support for MX51PDK (3DS) platform. This includes specific
 	  configurations for the board and its peripherals.
 
 config MACH_EUKREA_CPUIMX51SD
 	bool "Support Eukrea CPUIMX51SD module"
-	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
+	select SOC_IMX51
 	help
 	  Include support for Eukrea CPUIMX51SD platform. This includes
 	  specific configurations for the module and its peripherals.
@@ -736,12 +736,12 @@ comment "Device tree only"
 
 config	SOC_IMX53
 	bool "i.MX53 support"
-	select SOC_IMX5
 	select ARCH_MX5
 	select ARCH_MX53
 	select HAVE_CAN_FLEXCAN if CAN
 	select PINCTRL
 	select PINCTRL_IMX53
+	select SOC_IMX5
 
 	help
 	  This enables support for Freescale i.MX53 processor.

arch/arm/mach-ixp4xx/Kconfig

@@ -234,8 +234,8 @@ config IXP4XX_QMGR
 
 config IXP4XX_NPE
 	tristate "IXP4xx Network Processor Engine support"
-	select HOTPLUG
 	select FW_LOADER
+	select HOTPLUG
 	help
 	  This driver supports IXP4xx built-in network coprocessors
 	  and is automatically selected by Ethernet and HSS drivers.

arch/arm/mach-mmp/Kconfig

@@ -107,22 +107,22 @@ endmenu
 
 config CPU_PXA168
 	bool
-	select CPU_MOHAWK
 	select COMMON_CLK
+	select CPU_MOHAWK
 	help
 	  Select code specific to PXA168
 
 config CPU_PXA910
 	bool
-	select CPU_MOHAWK
 	select COMMON_CLK
+	select CPU_MOHAWK
 	help
 	  Select code specific to PXA910
 
 config CPU_MMP2
 	bool
-	select CPU_PJ4
 	select COMMON_CLK
+	select CPU_PJ4
 	help
 	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
 

arch/arm/mach-msm/Kconfig

@@ -10,35 +10,35 @@ choice
 
 config ARCH_MSM7X00A
 	bool "MSM7x00A / MSM7x01A"
-	select MACH_TROUT if !MACH_HALIBUT
 	select ARCH_MSM_ARM11
-	select MSM_SMD
-	select MSM_SMD_PKG3
 	select CPU_V6
 	select GPIO_MSM_V1
+	select MACH_TROUT if !MACH_HALIBUT
 	select MSM_PROC_COMM
+	select MSM_SMD
+	select MSM_SMD_PKG3
 
 config ARCH_MSM7X30
 	bool "MSM7x30"
-	select MACH_MSM7X30_SURF # if !
 	select ARCH_MSM_SCORPION
-	select MSM_SMD
-	select MSM_VIC
 	select CPU_V7
-	select MSM_GPIOMUX
 	select GPIO_MSM_V1
+	select MACH_MSM7X30_SURF # if !
+	select MSM_GPIOMUX
 	select MSM_PROC_COMM
+	select MSM_SMD
+	select MSM_VIC
 
 config ARCH_QSD8X50
 	bool "QSD8X50"
-	select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
 	select ARCH_MSM_SCORPION
-	select MSM_SMD
-	select MSM_VIC
 	select CPU_V7
-	select MSM_GPIOMUX
 	select GPIO_MSM_V1
+	select MACH_QSD8X50_SURF if !MACH_QSD8X50A_ST1_5
+	select MSM_GPIOMUX
 	select MSM_PROC_COMM
+	select MSM_SMD
+	select MSM_VIC
 
 endchoice
 
@@ -47,10 +47,10 @@ config ARCH_MSM8X60
 	select ARCH_MSM_SCORPIONMP
 	select ARM_GIC
 	select CPU_V7
-	select MSM_V2_TLMM
 	select GPIO_MSM_V2
 	select MSM_GPIOMUX
 	select MSM_SCM if SMP
+	select MSM_V2_TLMM
 	select USE_OF
 
 config ARCH_MSM8960
@@ -58,9 +58,9 @@ config ARCH_MSM8960
 	select ARCH_MSM_SCORPIONMP
 	select ARM_GIC
 	select CPU_V7
-	select MSM_V2_TLMM
 	select MSM_GPIOMUX
 	select MSM_SCM if SMP
+	select MSM_V2_TLMM
 	select USE_OF
 
 config MSM_HAS_DEBUG_UART_HS
@@ -110,8 +110,8 @@ config MACH_QSD8X50_SURF
 
 config MACH_QSD8X50A_ST1_5
 	depends on ARCH_QSD8X50
-	select MSM_SOC_REV_A
 	bool "QSD8x50A ST1.5"
+	select MSM_SOC_REV_A
 	help
 	  Support for the Qualcomm ST1.5.
 

arch/arm/mach-nomadik/Kconfig

@@ -4,8 +4,8 @@ menu "Nomadik boards"
 
 config MACH_NOMADIK_8815NHK
 	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
-	select NOMADIK_8815
 	select HAS_MTU
+	select NOMADIK_8815
 
 endmenu
 
@@ -16,7 +16,7 @@ config I2C_BITBANG_8815NHK
 	tristate "Driver for bit-bang busses found on the 8815 NHK"
 	depends on I2C && MACH_NOMADIK_8815NHK
 	depends on PINCTRL_NOMADIK
-	select I2C_ALGOBIT
 	default y
+	select I2C_ALGOBIT
 
 endif

arch/arm/mach-omap1/Kconfig

@@ -8,15 +8,15 @@ comment "OMAP Core Type"
 config ARCH_OMAP730
 	depends on ARCH_OMAP1
 	bool "OMAP730 Based System"
+	select ARCH_OMAP_OTG
 	select CPU_ARM926T
 	select OMAP_MPU_TIMER
-	select ARCH_OMAP_OTG
 
 config ARCH_OMAP850
 	depends on ARCH_OMAP1
 	bool "OMAP850 Based System"
-	select CPU_ARM926T
 	select ARCH_OMAP_OTG
+	select CPU_ARM926T
 
 config ARCH_OMAP15XX
 	depends on ARCH_OMAP1
@@ -28,8 +28,8 @@ config ARCH_OMAP15XX
 config ARCH_OMAP16XX
 	depends on ARCH_OMAP1
 	bool "OMAP16xx Based System"
-	select CPU_ARM926T
 	select ARCH_OMAP_OTG
+	select CPU_ARM926T
 
 comment "OMAP Board Type"
 	depends on ARCH_OMAP1
@@ -132,8 +132,8 @@ config MACH_OMAP_PALMTT
 
 config MACH_SX1
 	bool "Siemens SX1"
-	select I2C
 	depends on ARCH_OMAP1 && ARCH_OMAP15XX
+	select I2C
 	help
 	  Support for the Siemens SX1 phone. To boot the kernel,
 	  you'll need a SX1 compatible bootloader; check out

arch/arm/mach-omap2/Kconfig

@@ -6,19 +6,19 @@ config ARCH_OMAP2PLUS_TYPICAL
 	bool "Typical OMAP configuration"
 	default y
 	select AEABI
-	select REGULATOR
-	select PM_RUNTIME
-	select VFP
-	select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
-	select SERIAL_OMAP
-	select SERIAL_OMAP_CONSOLE
+	select HIGHMEM
 	select I2C
 	select I2C_OMAP
 	select MENELAUS if ARCH_OMAP2
+	select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
+	select PINCTRL
+	select PM_RUNTIME
+	select REGULATOR
+	select SERIAL_OMAP
+	select SERIAL_OMAP_CONSOLE
 	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
 	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
-	select HIGHMEM
-	select PINCTRL
+	select VFP
 	help
 	  Compile a kernel suitable for booting most boards
 
@@ -40,44 +40,44 @@ config ARCH_OMAP3
 	bool "TI OMAP3"
 	depends on ARCH_OMAP2PLUS
 	default y
-	select CPU_V7
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARCH_HAS_OPP
-	select PM_RUNTIME if CPU_IDLE
-	select PM_OPP if PM
 	select ARM_CPU_SUSPEND if PM
+	select CPU_V7
 	select MULTI_IRQ_HANDLER
-	select SOC_HAS_OMAP2_SDRC
 	select OMAP_INTERCONNECT
+	select PM_OPP if PM
+	select PM_RUNTIME if CPU_IDLE
+	select SOC_HAS_OMAP2_SDRC
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
 	default y
 	depends on ARCH_OMAP2PLUS
+	select ARCH_HAS_OPP
+	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
+	select ARM_CPU_SUSPEND if PM
+	select ARM_ERRATA_720789
+	select ARM_GIC
 	select CACHE_L2X0
 	select CPU_V7
-	select ARM_GIC
 	select HAVE_SMP
 	select LOCAL_TIMERS if SMP
+	select OMAP_INTERCONNECT
 	select PL310_ERRATA_588369
 	select PL310_ERRATA_727915
-	select ARM_ERRATA_720789
-	select ARCH_HAS_OPP
-	select PM_RUNTIME if CPU_IDLE
 	select PM_OPP if PM
+	select PM_RUNTIME if CPU_IDLE
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select ARM_CPU_SUSPEND if PM
-	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
-	select OMAP_INTERCONNECT
 
 config SOC_OMAP5
 	bool "TI OMAP5"
-	select CPU_V7
+	select ARM_ARCH_TIMER
+	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
+	select CPU_V7
 	select HAVE_SMP
-	select ARM_CPU_SUSPEND if PM
 	select SOC_HAS_REALTIME_COUNTER
-	select ARM_ARCH_TIMER
 
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
@@ -109,8 +109,8 @@ config SOC_TI81XX
 config SOC_AM33XX
 	bool "AM33XX support"
 	default y
-	select CPU_V7
 	select ARM_CPU_SUSPEND if PM
+	select CPU_V7
 	select MULTI_IRQ_HANDLER
 
 config OMAP_PACKAGE_ZAF
@@ -157,8 +157,8 @@ config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
 	depends on SOC_OMAP2420
 	default y
-	select OMAP_PACKAGE_ZAF
 	select OMAP_DEBUG_DEVICES
+	select OMAP_PACKAGE_ZAF
 
 config MACH_OMAP_APOLLON
 	bool "OMAP 2420 Apollon board"
@@ -193,8 +193,8 @@ config MACH_OMAP_LDP
 config MACH_OMAP3530_LV_SOM
 	bool "OMAP3 Logic 3530 LV SOM board"
 	depends on ARCH_OMAP3
-	select OMAP_PACKAGE_CBB
 	default y
+	select OMAP_PACKAGE_CBB
 	help
 	 Support for the LogicPD OMAP3530 SOM Development kit
 	 for full description please see the products webpage at
@@ -203,8 +203,8 @@ config MACH_OMAP3530_LV_SOM
 config MACH_OMAP3_TORPEDO
 	bool "OMAP3 Logic 35x Torpedo board"
 	depends on ARCH_OMAP3
-	select OMAP_PACKAGE_CBB
 	default y
+	select OMAP_PACKAGE_CBB
 	help
 	 Support for the LogicPD OMAP35x Torpedo Development kit
 	 for full description please see the products webpage at
@@ -265,17 +265,17 @@ config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
 	depends on SOC_OMAP2420
 	default y
-	select OMAP_PACKAGE_ZAC
 	select MACH_NOKIA_N800
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
+	select OMAP_PACKAGE_ZAC
 
 config MACH_NOKIA_RM680
 	bool "Nokia RM-680/696 board"
 	depends on ARCH_OMAP3
 	default y
-	select OMAP_PACKAGE_CBB
 	select MACH_NOKIA_RM696
+	select OMAP_PACKAGE_CBB
 
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
@@ -288,20 +288,20 @@ config MACH_OMAP_ZOOM2
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CBB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select SERIAL_8250
-	select SERIAL_CORE_CONSOLE
 	select SERIAL_8250_CONSOLE
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SERIAL_CORE_CONSOLE
 
 config MACH_OMAP_ZOOM3
 	bool "OMAP3630 Zoom3 board"
 	depends on ARCH_OMAP3
 	default y
 	select OMAP_PACKAGE_CBP
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select SERIAL_8250
-	select SERIAL_CORE_CONSOLE
 	select SERIAL_8250_CONSOLE
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SERIAL_CORE_CONSOLE
 
 config MACH_CM_T35
 	bool "CompuLab CM-T35/CM-T3730 modules"
@@ -329,8 +329,8 @@ config MACH_IGEP0030
 	bool "IGEP OMAP3 module"
 	depends on ARCH_OMAP3
 	default y
-	select OMAP_PACKAGE_CBB
 	select MACH_IGEP0020
+	select OMAP_PACKAGE_CBB
 
 config MACH_SBC3530
 	bool "OMAP3 SBC STALKER board"

arch/arm/mach-prima2/Kconfig

@@ -6,8 +6,8 @@ config ARCH_PRIMA2
 	bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
 	default y
 	select CPU_V7
-	select ZONE_DMA
 	select SIRF_IRQ
+	select ZONE_DMA
 	help
           Support for CSR SiRFSoC ARM Cortex A9 Platform
 

arch/arm/mach-pxa/Kconfig

@@ -27,10 +27,10 @@ comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
 config MACH_PXA3XX_DT
 	bool "Support PXA3xx platforms from device tree"
-	select PXA3xx
 	select CPU_PXA300
-	select POWER_SUPPLY
 	select HAVE_PWM
+	select POWER_SUPPLY
+	select PXA3xx
 	select USE_OF
 	help
 	  Include support for Marvell PXA3xx based platforms using
@@ -44,13 +44,13 @@ config ARCH_LUBBOCK
 
 config MACH_MAINSTONE
 	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
-	select PXA27x
 	select HAVE_PWM
+	select PXA27x
 
 config MACH_ZYLONITE
 	bool
-	select PXA3xx
 	select HAVE_PWM
+	select PXA3xx
 
 config MACH_ZYLONITE300
 	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
@@ -65,19 +65,19 @@ config MACH_ZYLONITE320
 
 config MACH_LITTLETON
 	bool "PXA3xx Form Factor Platform (aka Littleton)"
-	select PXA3xx
 	select CPU_PXA300
 	select CPU_PXA310
+	select PXA3xx
 
 config MACH_TAVOREVB
 	bool "PXA930 Evaluation Board (aka TavorEVB)"
-	select PXA3xx
 	select CPU_PXA930
+	select PXA3xx
 
 config MACH_SAAR
 	bool "PXA930 Handheld Platform (aka SAAR)"
-	select PXA3xx
 	select CPU_PXA930
+	select PXA3xx
 
 comment "Third Party Dev Platforms (sorted by vendor name)"
 
@@ -87,29 +87,29 @@ config ARCH_PXA_IDP
 
 config ARCH_VIPER
 	bool "Arcom/Eurotech VIPER SBC"
-	select PXA25x
-	select ISA
-	select I2C_GPIO
+	select ARCOM_PCMCIA
 	select HAVE_PWM
+	select I2C_GPIO
+	select ISA
+	select PXA25x
 	select PXA_HAVE_ISA_IRQS
-	select ARCOM_PCMCIA
 
 config MACH_ARCOM_ZEUS
 	bool "Arcom/Eurotech ZEUS SBC"
-	select PXA27x
+	select ARCOM_PCMCIA
 	select ISA
+	select PXA27x
 	select PXA_HAVE_ISA_IRQS
-	select ARCOM_PCMCIA
 
 config MACH_BALLOON3
 	bool "Balloon 3 board"
-	select PXA27x
 	select IWMMXT
+	select PXA27x
 
 config MACH_CSB726
 	bool "Enable Cogent CSB726 System On a Module"
-	select PXA27x
 	select IWMMXT
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on a Cogent
 	  CSB726 System On Module.
@@ -121,11 +121,11 @@ config CSB726_CSB701
 config MACH_ARMCORE
 	bool "CompuLab CM-X255/CM-X270 modules"
 	select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI
-	select PXA27x
 	select IWMMXT
-	select PXA25x
 	select MIGHT_HAVE_PCI
 	select NEED_MACH_IO_H if PCI
+	select PXA25x
+	select PXA27x
 
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
@@ -137,10 +137,10 @@ config MACH_EXEDA
 
 config MACH_CM_X300
 	bool "CompuLab CM-X300 modules"
-	select PXA3xx
 	select CPU_PXA300
 	select CPU_PXA310
 	select HAVE_PWM
+	select PXA3xx
 
 config MACH_CAPC7117
 	bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM"
@@ -168,22 +168,22 @@ endchoice
 
 config MACH_INTELMOTE2
 	bool "Intel Mote 2 Platform"
-	select PXA27x
 	select IWMMXT
+	select PXA27x
 
 config MACH_STARGATE2
 	bool "Intel Stargate 2 Platform"
-	select PXA27x
 	select IWMMXT
+	select PXA27x
 
 config MACH_XCEP
 	bool "Iskratel Electronics XCEP"
-	select PXA25x
 	select MTD
-	select MTD_PHYSMAP
-	select MTD_CFI_INTELEXT
 	select MTD_CFI
+	select MTD_CFI_INTELEXT
 	select MTD_CHAR
+	select MTD_PHYSMAP
+	select PXA25x
 	select SMC91X
 	help
 	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
@@ -195,14 +195,14 @@ config TRIZEPS_PXA
 config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
 	depends on TRIZEPS_PXA
-	select TRIZEPS_PCMCIA
 	select PXA27x
+	select TRIZEPS_PCMCIA
 
 config MACH_TRIZEPS4WL
 	bool "Keith und Koep Trizeps4-WL DIMM-Module"
 	depends on TRIZEPS_PXA
-	select TRIZEPS_PCMCIA
 	select PXA27x
+	select TRIZEPS_PCMCIA
 
 choice
 	prompt "Select base board for Trizeps module"
@@ -231,18 +231,18 @@ config TRIZEPS_PCMCIA
 
 config MACH_LOGICPD_PXA270
 	bool "LogicPD PXA270 Card Engine Development Platform"
-	select PXA27x
 	select HAVE_PWM
+	select PXA27x
 
 config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
-	select PXA27x
 	select IWMMXT
+	select PXA27x
 
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
-	select HAVE_PWM
 	depends on MACH_PCM027
+	select HAVE_PWM
 
 choice
 	prompt "display on pcm990"
@@ -266,19 +266,19 @@ config MACH_COLIBRI
 config MACH_COLIBRI_PXA270_INCOME
 	bool "Income s.r.o. PXA270 SBC"
 	depends on MACH_COLIBRI
-	select PXA27x
 	select HAVE_PWM
+	select PXA27x
 
 config MACH_COLIBRI300
 	bool "Toradex Colibri PXA300/310"
-	select PXA3xx
 	select CPU_PXA300
 	select CPU_PXA310
+	select PXA3xx
 
 config MACH_COLIBRI320
 	bool "Toradex Colibri PXA320"
-	select PXA3xx
 	select CPU_PXA320
+	select PXA3xx
 
 config MACH_COLIBRI_EVALBOARD
 	bool "Toradex Colibri Evaluation Carrier Board support"
@@ -286,8 +286,8 @@ config MACH_COLIBRI_EVALBOARD
 
 config MACH_VPAC270
 	bool "Voipac PXA270"
-	select PXA27x
 	select HAVE_PATA_PLATFORM
+	select PXA27x
 	help
 	  PXA270 based Single Board Computer.
 
@@ -295,9 +295,9 @@ comment "End-user Products (sorted by vendor name)"
 
 config MACH_H4700
 	bool "HP iPAQ hx4700"
-	select PXA27x
-	select IWMMXT
 	select HAVE_PWM
+	select IWMMXT
+	select PXA27x
 
 config MACH_H5000
 	bool "HP iPAQ h5000"
@@ -309,16 +309,16 @@ config MACH_HIMALAYA
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
-	select PXA27x
-	select IWMMXT
 	select HAVE_PWM
+	select IWMMXT
+	select PXA27x
 
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
-	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
 	select GPIO_SYSFS
+	select HAVE_PWM
+	select IWMMXT
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on a
 	  MIO A701. Currently there is only basic support
@@ -326,9 +326,9 @@ config MACH_MIOA701
 
 config PXA_EZX
 	bool "Motorola EZX Platform"
-	select PXA27x
-	select IWMMXT
 	select HAVE_PWM
+	select IWMMXT
+	select PXA27x
 
 config MACH_EZX_A780
 	bool "Motorola EZX A780"
@@ -393,9 +393,9 @@ config MACH_PALMT5
 	bool "Palm Tungsten|T5"
 	default y
 	depends on ARCH_PXA_PALM
-	select PXA27x
 	select IWMMXT
 	select MACH_PALM27X
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
 	  handheld computer.
@@ -404,9 +404,9 @@ config MACH_PALMTX
 	bool "Palm T|X"
 	default y
 	depends on ARCH_PXA_PALM
-	select PXA27x
 	select IWMMXT
 	select MACH_PALM27X
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on a Palm T|X
 	  handheld computer.
@@ -415,9 +415,9 @@ config MACH_PALMZ72
 	bool "Palm Zire 72"
 	default y
 	depends on ARCH_PXA_PALM
-	select PXA27x
 	select IWMMXT
 	select MACH_PALM27X
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on Palm Zire 72
 	  handheld computer.
@@ -426,9 +426,9 @@ config MACH_PALMLD
 	bool "Palm LifeDrive"
 	default y
 	depends on ARCH_PXA_PALM
-	select PXA27x
 	select IWMMXT
 	select MACH_PALM27X
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on a Palm LifeDrive
 	  handheld computer.
@@ -441,10 +441,10 @@ config MACH_CENTRO
 	bool "Palm Centro 685 (GSM)"
 	default y
 	depends on ARCH_PXA_PALM
-	select MACH_PALM27X
-	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	select PALM_TREO
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
 	  smartphone.
@@ -453,37 +453,37 @@ config MACH_TREO680
 	bool "Palm Treo 680"
 	default y
 	depends on ARCH_PXA_PALM
-	select MACH_PALM27X
-	select PXA27x
 	select IWMMXT
+	select MACH_PALM27X
 	select PALM_TREO
+	select PXA27x
 	help
 	  Say Y here if you intend to run this kernel on Palm Treo 680
 	  smartphone.
 
 config MACH_RAUMFELD_RC
 	bool "Raumfeld Controller"
-	select PXA3xx
 	select CPU_PXA300
-	select POWER_SUPPLY
 	select HAVE_PWM
+	select POWER_SUPPLY
+	select PXA3xx
 
 config MACH_RAUMFELD_CONNECTOR
 	bool "Raumfeld Connector"
+	select CPU_PXA300
 	select POWER_SUPPLY
 	select PXA3xx
-	select CPU_PXA300
 
 config MACH_RAUMFELD_SPEAKER
 	bool "Raumfeld Speaker"
+	select CPU_PXA300
 	select POWER_SUPPLY
 	select PXA3xx
-	select CPU_PXA300
 
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
-	select SHARP_SCOOP
 	select SHARP_PARAM
+	select SHARP_SCOOP
 	help
 	  Say Y here if you intend to run this kernel on a
 	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
@@ -526,11 +526,11 @@ config MACH_HUSKY
 config MACH_AKITA
 	bool "Enable Sharp SL-1000 (Akita) Support"
 	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-	select MACH_SPITZ
 	select I2C
 	select I2C_PXA
+	select MACH_SPITZ
+	select PXA27x
+	select PXA_SHARP_Cxx00
 
 config MACH_SPITZ
 	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
@@ -575,8 +575,8 @@ config MACH_ICONTROL
 
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
-	select PXA25x
 	select FB_W100
+	select PXA25x
 
 config MACH_E330
 	bool "Toshiba e330"
@@ -628,8 +628,8 @@ config MACH_E800
 
 config MACH_ZIPIT2
 	bool "Zipit Z2 Handheld"
-	select PXA27x
 	select HAVE_PWM
+	select PXA27x
 endif
 endmenu
 
@@ -720,9 +720,9 @@ config SHARPSL_PM
 config SHARPSL_PM_MAX1111
 	bool
 	select HWMON
+	select SENSORS_MAX1111
 	select SPI
 	select SPI_MASTER
-	select SENSORS_MAX1111
 
 config PXA_HAVE_ISA_IRQS
 	bool

arch/arm/mach-realview/Kconfig

@@ -21,8 +21,8 @@ config REALVIEW_EB_A9MP
 config REALVIEW_EB_ARM11MP
 	bool "Support ARM11MPCore Tile"
 	depends on MACH_REALVIEW_EB
-	select CPU_V6K
 	select ARCH_HAS_BARRIERS if SMP
+	select CPU_V6K
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -40,12 +40,12 @@ config REALVIEW_EB_ARM11MP_REVB
 
 config MACH_REALVIEW_PB11MP
 	bool "Support RealView(R) Platform Baseboard for ARM11MPCore"
-	select CPU_V6K
+	select ARCH_HAS_BARRIERS if SMP
 	select ARM_GIC
+	select CPU_V6K
 	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
-	select ARCH_HAS_BARRIERS if SMP
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard for
 	  the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
@@ -54,8 +54,8 @@ config MACH_REALVIEW_PB11MP
 # ARMv6 CPU without K extensions, but does have the new exclusive ops
 config MACH_REALVIEW_PB1176
 	bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
-	select CPU_V6
 	select ARM_GIC
+	select CPU_V6
 	select HAVE_TCM
 	select MIGHT_HAVE_CACHE_L2X0
 	help
@@ -73,8 +73,8 @@ config REALVIEW_PB1176_SECURE_FLASH
 
 config MACH_REALVIEW_PBA8
 	bool "Support RealView(R) Platform Baseboard for Cortex(tm)-A8 platform"
-	select CPU_V7
 	select ARM_GIC
+	select CPU_V7
 	select HAVE_PATA_PLATFORM
 	help
 	  Include support for the ARM(R) RealView Platform Baseboard for
@@ -83,11 +83,11 @@ config MACH_REALVIEW_PBA8
 
 config MACH_REALVIEW_PBX
 	bool "Support RealView(R) Platform Baseboard Explore"
+	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
-	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ZONE_DMA if SPARSEMEM
 	help
 	  Include support for the ARM(R) RealView(R) Platform Baseboard

arch/arm/mach-s3c2412/Kconfig

@@ -7,7 +7,7 @@
 config S3C2412_CPUFREQ
 	bool
 	depends on CPU_FREQ_S3C24XX && CPU_S3C2412
-	select S3C2412_IOTIMING
 	default y
+	select S3C2412_IOTIMING
 	help
 	  CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.

arch/arm/mach-s3c2440/Kconfig

@@ -5,8 +5,8 @@
 config S3C2440_CPUFREQ
 	bool "S3C2440/S3C2442 CPU Frequency scaling support"
 	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
-	select S3C2410_CPUFREQ_UTILS
 	default y
+	select S3C2410_CPUFREQ_UTILS
 	help
 	  CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
 

arch/arm/mach-s3c24xx/Kconfig

@@ -17,10 +17,10 @@ config CPU_S3C2410
 	bool "SAMSUNG S3C2410"
 	default y
 	select CPU_ARM920T
-	select S3C2410_CLOCK
 	select CPU_LLSERIAL_S3C2410
-	select S3C2410_PM if PM
+	select S3C2410_CLOCK
 	select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
+	select S3C2410_PM if PM
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
 	  of Samsung Mobile CPUs.
@@ -30,8 +30,8 @@ config CPU_S3C2412
 	depends on ARCH_S3C24XX
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
-	select S3C2412_PM if PM
 	select S3C2412_DMA if S3C24XX_DMA
+	select S3C2412_PM if PM
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
@@ -40,10 +40,10 @@ config CPU_S3C2416
 	depends on ARCH_S3C24XX
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
-	select SAMSUNG_CLKSRC
+	select S3C2416_PM if PM
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
-	select S3C2416_PM if PM
+	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
 
@@ -75,9 +75,9 @@ config CPU_S3C2443
 	depends on ARCH_S3C24XX
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
-	select SAMSUNG_CLKSRC
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
+	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
@@ -156,16 +156,16 @@ config MACH_AML_M5900
 
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
+	select ISA
+	select MACH_BAST_IDE
 	select S3C2410_IOTIMING if S3C2410_CPUFREQ
-	select S3C24XX_SIMTEC_PM if PM
+	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_NOR
+	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_SIMTEC_USB
-	select MACH_BAST_IDE
-	select S3C24XX_DCLK
-	select ISA
 	select S3C_DEV_HWMON
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
 	  development board (also known as BAST)
@@ -181,9 +181,9 @@ config BAST_PC104_IRQ
 config ARCH_H1940
 	bool "IPAQ H1940"
 	select PM_H1940 if PM
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
 	select S3C24XX_SETUP_TS
+	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
@@ -203,23 +203,23 @@ config PM_H1940
 config MACH_N30
 	bool "Acer N30 family"
 	select MACH_N35
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you want suppt for the Acer N30, Acer N35,
 	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
 
 config MACH_OTOM
 	bool "NexVision OTOM Board"
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Nex Vision OTOM board
 
 config MACH_QT2410
 	bool "QT2410"
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Armzone QT2410
 
@@ -239,12 +239,12 @@ config MACH_TCT_HAMMER
 
 config MACH_VR1000
 	bool "Thorcom VR1000"
-	select S3C24XX_SIMTEC_PM if PM
+	select MACH_BAST_IDE
 	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_NOR
-	select MACH_BAST_IDE
-	select S3C_DEV_USB_HOST
+	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_SIMTEC_USB
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Thorcom VR1000 board.
 
@@ -285,8 +285,8 @@ comment "S3C2412 Boards"
 
 config MACH_JIVE
 	bool "Logitech Jive"
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Logitech Jive.
 
@@ -314,15 +314,15 @@ config MACH_SMDK2413
 	bool "SMDK2413"
 	select MACH_S3C2413
 	select S3C24XX_SMDK
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an SMDK2413
 
 config MACH_VSTMS
 	bool "VMSTMS"
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using an VSTMS board
 
@@ -351,13 +351,13 @@ comment "S3C2416 Boards"
 
 config MACH_SMDK2416
 	bool "SMDK2416"
+	select S3C2416_SETUP_SDHCI
 	select S3C24XX_SMDK
 	select S3C_DEV_FB
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
-	select S3C2416_SETUP_SDHCI
 	help
 	  Say Y here if you are using an SMDK2416
 
@@ -379,11 +379,11 @@ comment "S3C2440 Boards"
 
 config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
-	select S3C24XX_DCLK
-	select S3C24XX_SIMTEC_PM if PM
 	select HAVE_PATA_PLATFORM
-	select S3C24XX_GPIO_EXTRA64
 	select S3C2440_XTAL_12000000
+	select S3C24XX_DCLK
+	select S3C24XX_GPIO_EXTRA64
+	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec Electronics ANUBIS
@@ -391,18 +391,18 @@ config MACH_ANUBIS
 
 config MACH_AT2440EVB
 	bool "Avantech AT2440EVB development board"
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the AT2440EVB development board
 
 config MACH_MINI2440
 	bool "MINI2440 development board"
 	select EEPROM_AT24
-	select NEW_LEDS
 	select LEDS_CLASS
 	select LEDS_TRIGGER
 	select LEDS_TRIGGER_BACKLIGHT
+	select NEW_LEDS
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
 	help
@@ -412,20 +412,20 @@ config MACH_MINI2440
 config MACH_NEXCODER_2440
 	bool "NexVision NEXCODER 2440 Light Board"
 	select S3C2440_XTAL_12000000
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 
 config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
+	select S3C2410_IOTIMING if S3C2440_CPUFREQ
+	select S3C2440_XTAL_12000000
 	select S3C24XX_DCLK
-	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_GPIO_EXTRA128
-	select S3C2440_XTAL_12000000
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
-	select S3C_DEV_USB_HOST
+	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
@@ -445,8 +445,8 @@ config MACH_OSIRIS_DVS
 
 config MACH_RX3715
 	bool "HP iPAQ rx3715"
-	select S3C2440_XTAL_16934400
 	select PM_H1940 if PM
+	select S3C2440_XTAL_16934400
 	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the HP iPAQ rx3715.
@@ -455,8 +455,8 @@ config ARCH_S3C2440
 	bool "SMDK2440"
 	select S3C2440_XTAL_16934400
 	select S3C24XX_SMDK
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here if you are using the SMDK2440.
 
@@ -478,11 +478,11 @@ comment "S3C2442 Boards"
 
 config MACH_NEO1973_GTA02
 	bool "Openmoko GTA02 / Freerunner phone"
+	select I2C
+	select MACH_NEO1973
 	select MFD_PCF50633
 	select PCF50633_GPIO
-	select I2C
 	select POWER_SUPPLY
-	select MACH_NEO1973
 	select S3C24XX_PWM
 	select S3C_DEV_USB_HOST
 	help
@@ -490,13 +490,13 @@ config MACH_NEO1973_GTA02
 
 config MACH_RX1950
 	bool "HP iPAQ rx1950"
-	select S3C24XX_DCLK
-	select PM_H1940 if PM
 	select I2C
-	select S3C24XX_PWM
-	select S3C_DEV_NAND
+	select PM_H1940 if PM
 	select S3C2410_IOTIMING if S3C2440_CPUFREQ
 	select S3C2440_XTAL_16934400
+	select S3C24XX_DCLK
+	select S3C24XX_PWM
+	select S3C_DEV_NAND
 	help
 	   Say Y here if you're using HP iPAQ rx1950
 

arch/arm/mach-s3c64xx/Kconfig

@@ -7,9 +7,9 @@
 config PLAT_S3C64XX
 	bool
 	depends on ARCH_S3C64XX
-	select SAMSUNG_WAKEMASK
-	select PM_GENERIC_DOMAINS
 	default y
+	select PM_GENERIC_DOMAINS
+	select SAMSUNG_WAKEMASK
 	help
 	  Base platform code for any Samsung S3C64XX device
 
@@ -31,8 +31,8 @@ config S3C64XX_DMA
 	select S3C_DMA
 
 config S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_SDHCI_GPIO
 	bool
+	select S3C64XX_SETUP_SDHCI_GPIO
 	help
 	  Internal configuration for default SDHCI setup for S3C6400 and
 	  S3C6410 SoCs.
@@ -93,9 +93,9 @@ config S3C64XX_SETUP_USB_PHY
 config MACH_SMDK6400
        bool "SMDK6400"
 	select CPU_S3C6400
+	select S3C64XX_SETUP_SDHCI
 	select S3C_DEV_HSMMC
 	select S3C_DEV_NAND
-	select S3C64XX_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDK6400
 
@@ -104,21 +104,21 @@ config MACH_SMDK6400
 config MACH_ANW6410
 	bool "A&W6410"
 	select CPU_S3C6410
-	select S3C_DEV_FB
 	select S3C64XX_SETUP_FB_24BPP
+	select S3C_DEV_FB
 	help
 	  Machine support for the A&W6410
 
 config MACH_MINI6410
 	bool "MINI6410"
 	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_SDHCI
+	select S3C_DEV_FB
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
-	select S3C64XX_SETUP_SDHCI
-	select S3C_DEV_USB_HOST
 	select S3C_DEV_NAND
-	select S3C_DEV_FB
-	select S3C64XX_SETUP_FB_24BPP
+	select S3C_DEV_USB_HOST
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_TS
 	help
@@ -127,42 +127,42 @@ config MACH_MINI6410
 config MACH_REAL6410
 	bool "REAL6410"
 	select CPU_S3C6410
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
+	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_SDHCI
 	select S3C_DEV_FB
-	select S3C64XX_SETUP_FB_24BPP
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_TS
-	select S3C_DEV_USB_HOST
 	help
 	  Machine support for the CoreWind REAL6410
 
 config MACH_SMDK6410
 	bool "SMDK6410"
 	select CPU_S3C6410
-	select SAMSUNG_DEV_ADC
+	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_I2C1
+	select S3C64XX_SETUP_IDE
+	select S3C64XX_SETUP_KEYPAD
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_USB_PHY
+	select S3C_DEV_FB
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_I2C1
-	select SAMSUNG_DEV_IDE
-	select S3C_DEV_FB
 	select S3C_DEV_RTC
-	select SAMSUNG_DEV_TS
 	select S3C_DEV_USB_HOST
 	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
+	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_IDE
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_I2C1
-	select S3C64XX_SETUP_IDE
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_KEYPAD
-	select S3C64XX_SETUP_USB_PHY
+	select SAMSUNG_DEV_TS
 	help
 	  Machine support for the Samsung SMDK6410
 
@@ -198,13 +198,13 @@ endchoice
 config SMDK6410_WM1190_EV1
 	bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
 	depends on MACH_SMDK6410
-	select REGULATOR
-	select REGULATOR_WM8350
-	select SAMSUNG_GPIO_EXTRA64
-	select MFD_WM8350_I2C
 	select MFD_WM8350_CONFIG_MODE_0
 	select MFD_WM8350_CONFIG_MODE_3
+	select MFD_WM8350_I2C
 	select MFD_WM8352_CONFIG_MODE_0
+	select REGULATOR
+	select REGULATOR_WM8350
+	select SAMSUNG_GPIO_EXTRA64
 	help
 	  The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
 	  and audio daughtercard for the Samsung SMDK6410 reference
@@ -216,11 +216,11 @@ config SMDK6410_WM1190_EV1
 config SMDK6410_WM1192_EV1
 	bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
 	depends on MACH_SMDK6410
+	select MFD_WM831X
+	select MFD_WM831X_I2C
 	select REGULATOR
 	select REGULATOR_WM831X
 	select SAMSUNG_GPIO_EXTRA64
-	select MFD_WM831X
-	select MFD_WM831X_I2C
 	help
 	  The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
 	  daughtercard for the Samsung SMDK6410 reference platform.
@@ -232,19 +232,19 @@ config SMDK6410_WM1192_EV1
 config MACH_NCP
 	bool "NCP"
 	select CPU_S3C6410
-	select S3C_DEV_I2C1
-	select S3C_DEV_HSMMC1
 	select S3C64XX_SETUP_I2C1
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_I2C1
 	help
           Machine support for the Samsung NCP
 
 config MACH_HMT
 	bool "Airgoo HMT"
 	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
 	select S3C_DEV_FB
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
-	select S3C64XX_SETUP_FB_24BPP
 	select SAMSUNG_DEV_PWM
 	help
 	  Machine support for the Airgoo HMT
@@ -252,17 +252,17 @@ config MACH_HMT
 config MACH_SMARTQ
 	bool
 	select CPU_S3C6410
+	select S3C64XX_SETUP_FB_24BPP
+	select S3C64XX_SETUP_SDHCI
+	select S3C64XX_SETUP_USB_PHY
+	select S3C_DEV_FB
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
-	select S3C_DEV_FB
 	select S3C_DEV_HWMON
 	select S3C_DEV_RTC
-	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_USB_HOST
-	select S3C64XX_SETUP_SDHCI
-	select S3C64XX_SETUP_FB_24BPP
-	select S3C64XX_SETUP_USB_PHY
+	select S3C_DEV_USB_HSOTG
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
@@ -284,26 +284,26 @@ config MACH_SMARTQ7
 config MACH_WLF_CRAGG_6410
 	bool "Wolfson Cragganmore 6410"
 	select CPU_S3C6410
-	select S3C64XX_SETUP_SDHCI
+	select I2C
+	select LEDS_GPIO_REGISTER
+	select S3C64XX_DEV_SPI0
+	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_I2C1
 	select S3C64XX_SETUP_IDE
-	select S3C64XX_SETUP_FB_24BPP
 	select S3C64XX_SETUP_KEYPAD
+	select S3C64XX_SETUP_SDHCI
 	select S3C64XX_SETUP_SPI
 	select S3C64XX_SETUP_USB_PHY
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_KEYPAD
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_I2C1
-	select S3C_DEV_WDT
 	select S3C_DEV_RTC
-	select S3C64XX_DEV_SPI0
+	select S3C_DEV_USB_HOST
+	select S3C_DEV_USB_HSOTG
+	select S3C_DEV_WDT
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_GPIO_EXTRA128
-	select I2C
-	select LEDS_GPIO_REGISTER
 	help
 	  Machine support for the Wolfson Cragganmore S3C6410 variant.

arch/arm/mach-s5p64x0/Kconfig

@@ -9,18 +9,18 @@ if ARCH_S5P64X0
 
 config CPU_S5P6440
 	bool
-	select SAMSUNG_DMADEV
 	select S5P_HRT
 	select S5P_SLEEP if PM
+	select SAMSUNG_DMADEV
 	select SAMSUNG_WAKEMASK if PM
 	help
 	  Enable S5P6440 CPU support
 
 config CPU_S5P6450
 	bool
-	select SAMSUNG_DMADEV
 	select S5P_HRT
 	select S5P_SLEEP if PM
+	select SAMSUNG_DMADEV
 	select SAMSUNG_WAKEMASK if PM
 	help
 	  Enable S5P6450 CPU support
@@ -52,19 +52,19 @@ config MACH_SMDK6440
 	bool "SMDK6440"
 	select CPU_S5P6440
 	select S3C_DEV_FB
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S5P64X0_SETUP_FB_24BPP
+	select S5P64X0_SETUP_I2C1
+	select S5P64X0_SETUP_SDHCI_GPIO
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
-	select S5P64X0_SETUP_FB_24BPP
-	select S5P64X0_SETUP_I2C1
-	select S5P64X0_SETUP_SDHCI_GPIO
 	help
 	  Machine support for the Samsung SMDK6440
 
@@ -72,19 +72,19 @@ config MACH_SMDK6450
 	bool "SMDK6450"
 	select CPU_S5P6450
 	select S3C_DEV_FB
-	select S3C_DEV_I2C1
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
+	select S3C_DEV_I2C1
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S5P64X0_SETUP_FB_24BPP
+	select S5P64X0_SETUP_I2C1
+	select S5P64X0_SETUP_SDHCI_GPIO
 	select SAMSUNG_DEV_ADC
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
-	select S5P64X0_SETUP_FB_24BPP
-	select S5P64X0_SETUP_I2C1
-	select S5P64X0_SETUP_SDHCI_GPIO
 	help
 	  Machine support for the Samsung SMDK6450
 

arch/arm/mach-s5pc100/Kconfig

@@ -60,12 +60,6 @@ config MACH_SMDKC100
 	select S3C_DEV_I2C1
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
-	select SAMSUNG_DEV_ADC
-	select SAMSUNG_DEV_BACKLIGHT
-	select SAMSUNG_DEV_IDE
-	select SAMSUNG_DEV_KEYPAD
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_TS
 	select S5PC100_SETUP_FB_24BPP
 	select S5PC100_SETUP_I2C1
 	select S5PC100_SETUP_IDE
@@ -74,6 +68,12 @@ config MACH_SMDKC100
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
+	select SAMSUNG_DEV_ADC
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_IDE
+	select SAMSUNG_DEV_KEYPAD
+	select SAMSUNG_DEV_PWM
+	select SAMSUNG_DEV_TS
 	help
 	  Machine support for the Samsung SMDKC100
 

arch/arm/mach-s5pv210/Kconfig

@@ -11,11 +11,11 @@ if ARCH_S5PV210
 
 config CPU_S5PV210
 	bool
-	select SAMSUNG_DMADEV
 	select S5P_EXT_INT
 	select S5P_HRT
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
+	select SAMSUNG_DMADEV
 	help
 	  Enable S5PV210 CPU support
 
@@ -76,44 +76,44 @@ config MACH_AQUILA
 	bool "Aquila"
 	select CPU_S5PV210
 	select S3C_DEV_FB
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
-	select S5P_DEV_ONENAND
 	select S5PV210_SETUP_FB_24BPP
 	select S5PV210_SETUP_SDHCI
 	select S5PV210_SETUP_USB_PHY
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_ONENAND
 	help
 	  Machine support for the Samsung Aquila target based on S5PC110 SoC
 
 config MACH_GONI
 	bool "GONI"
 	select CPU_S5PV210
-	select S5P_GPIO_INT
 	select S3C_DEV_FB
-	select S5P_DEV_FIMC0
-	select S5P_DEV_FIMC1
-	select S5P_DEV_FIMC2
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_I2C1
 	select S3C_DEV_I2C2
-	select S5P_DEV_MFC
 	select S3C_DEV_USB_HSOTG
-	select S5P_DEV_ONENAND
-	select SAMSUNG_DEV_KEYPAD
-	select S5P_DEV_TV
 	select S5PV210_SETUP_FB_24BPP
+	select S5PV210_SETUP_FIMC
 	select S5PV210_SETUP_I2C1
 	select S5PV210_SETUP_I2C2
 	select S5PV210_SETUP_KEYPAD
 	select S5PV210_SETUP_SDHCI
-	select S5PV210_SETUP_FIMC
 	select S5PV210_SETUP_USB_PHY
+	select S5P_DEV_FIMC0
+	select S5P_DEV_FIMC1
+	select S5P_DEV_FIMC2
+	select S5P_DEV_MFC
+	select S5P_DEV_ONENAND
+	select S5P_DEV_TV
+	select S5P_GPIO_INT
+	select SAMSUNG_DEV_KEYPAD
 	help
 	  Machine support for Samsung GONI board
 	  S5PC110(MCP) is one of package option of S5PV210
@@ -125,14 +125,14 @@ config MACH_SMDKC110
 	select S3C_DEV_I2C2
 	select S3C_DEV_RTC
 	select S3C_DEV_WDT
+	select S5PV210_SETUP_I2C1
+	select S5PV210_SETUP_I2C2
+	select S5PV210_SETUP_IDE
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_MFC
 	select SAMSUNG_DEV_IDE
-	select S5PV210_SETUP_I2C1
-	select S5PV210_SETUP_I2C2
-	select S5PV210_SETUP_IDE
 	help
 	  Machine support for Samsung SMDKC110
 	  S5PC110(MCP) is one of package option of S5PV210
@@ -154,6 +154,13 @@ config MACH_SMDKV210
 	select S3C_DEV_RTC
 	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
+	select S5PV210_SETUP_FB_24BPP
+	select S5PV210_SETUP_I2C1
+	select S5PV210_SETUP_I2C2
+	select S5PV210_SETUP_IDE
+	select S5PV210_SETUP_KEYPAD
+	select S5PV210_SETUP_SDHCI
+	select S5PV210_SETUP_USB_PHY
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
@@ -165,20 +172,13 @@ config MACH_SMDKV210
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
 	select SAMSUNG_DEV_TS
-	select S5PV210_SETUP_FB_24BPP
-	select S5PV210_SETUP_I2C1
-	select S5PV210_SETUP_I2C2
-	select S5PV210_SETUP_IDE
-	select S5PV210_SETUP_KEYPAD
-	select S5PV210_SETUP_SDHCI
-	select S5PV210_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDKV210
 
 config MACH_TORBRECK
 	bool "Torbreck"
-	select CPU_S5PV210
 	select ARCH_SPARSEMEM_ENABLE
+	select CPU_S5PV210
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2

arch/arm/mach-sa1100/Kconfig

@@ -49,15 +49,15 @@ config SA1100_COLLIE
 	bool "Sharp Zaurus SL5500"
 	# FIXME: select CPU_FREQ_SA11x0
 	select SHARP_LOCOMO
-	select SHARP_SCOOP
 	select SHARP_PARAM
+	select SHARP_SCOOP
 	help
 	  Say Y here to support the Sharp Zaurus SL5500 PDAs.
 
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
-	select HTC_EGPIO
 	select CPU_FREQ_SA1110
+	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3100 handheld computer.  Information about this machine and the
@@ -67,8 +67,8 @@ config SA1100_H3100
 
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
-	select HTC_EGPIO
 	select CPU_FREQ_SA1110
+	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3600 handheld computer.  Information about this machine and the
@@ -78,16 +78,16 @@ config SA1100_H3600
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
-	select SA1111
 	select CPU_FREQ_SA1100
+	select SA1111
 	help
 	  Say Y here if you want to build a kernel for the HP Laboratories
 	  BadgePAD 4.
 
 config SA1100_JORNADA720
 	bool "HP Jornada 720"
-	select SA1111
 	# FIXME: select CPU_FREQ_SA11x0
+	select SA1111
 	help
 	  Say Y here if you want to build a kernel for the HP Jornada 720
 	  handheld computer.  See 
@@ -95,8 +95,8 @@ config SA1100_JORNADA720
 
 config SA1100_JORNADA720_SSP
 	bool "HP Jornada 720 Extended SSP driver"
-	select SA1100_SSP
 	depends on SA1100_JORNADA720
+	select SA1100_SSP
 	help
 	  Say Y here if you have a HP Jornada 7xx handheld computer and you
 	  want to access devices connected to the MCU. Those include the

arch/arm/mach-shmobile/Kconfig

@@ -4,49 +4,49 @@ comment "SH-Mobile System Type"
 
 config ARCH_SH7367
 	bool "SH-Mobile G3 (SH7367)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select CPU_V6
 	select SH_CLK_CPG
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config ARCH_SH7377
 	bool "SH-Mobile G4 (SH7377)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select CPU_V7
 	select SH_CLK_CPG
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config ARCH_SH7372
 	bool "SH-Mobile AP4 (SH7372)"
-	select CPU_V7
-	select SH_CLK_CPG
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_CPU_SUSPEND if PM || CPU_IDLE
+	select CPU_V7
+	select SH_CLK_CPG
 
 config ARCH_SH73A0
 	bool "SH-Mobile AG5 (R8A73A00)"
-	select CPU_V7
-	select SH_CLK_CPG
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
+	select CPU_V7
 	select I2C
+	select SH_CLK_CPG
 
 config ARCH_R8A7740
 	bool "R-Mobile A1 (R8A77400)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select CPU_V7
 	select SH_CLK_CPG
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config ARCH_R8A7779
 	bool "R-Car H1 (R8A77790)"
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_GIC
 	select CPU_V7
 	select SH_CLK_CPG
-	select ARM_GIC
-	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config ARCH_EMEV2
 	bool "Emma Mobile EV2"
-	select CPU_V7
-	select ARM_GIC
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARM_GIC
+	select CPU_V7
 
 comment "SH-Mobile Board Type"
 
@@ -65,9 +65,9 @@ config MACH_AP4EVB
 	bool "AP4EVB board"
 	depends on ARCH_SH7372
 	select ARCH_REQUIRE_GPIOLIB
+	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select SH_LCD_MIPI_DSI
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 choice
 	prompt "AP4EVB LCD panel selection"
@@ -84,37 +84,37 @@ endchoice
 
 config MACH_AG5EVM
 	bool "AG5EVM board"
+	depends on ARCH_SH73A0
 	select ARCH_REQUIRE_GPIOLIB
-	select SH_LCD_MIPI_DSI
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	depends on ARCH_SH73A0
+	select SH_LCD_MIPI_DSI
 
 config MACH_MACKEREL
 	bool "mackerel board"
 	depends on ARCH_SH7372
 	select ARCH_REQUIRE_GPIOLIB
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 
 config MACH_KOTA2
 	bool "KOTA2 board"
+	depends on ARCH_SH73A0
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	depends on ARCH_SH73A0
 
 config MACH_BONITO
 	bool "bonito board"
+	depends on ARCH_R8A7740
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	depends on ARCH_R8A7740
 
 config MACH_ARMADILLO800EVA
 	bool "Armadillo-800 EVA board"
 	depends on ARCH_R8A7740
 	select ARCH_REQUIRE_GPIOLIB
-	select USE_OF
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select SND_SOC_WM8978 if SND_SIMPLE_CARD
+	select USE_OF
 
 config MACH_MARZEN
 	bool "MARZEN board"
@@ -125,16 +125,16 @@ config MACH_MARZEN
 config MACH_KZM9D
 	bool "KZM9D board"
 	depends on ARCH_EMEV2
-	select USE_OF
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select USE_OF
 
 config MACH_KZM9G
 	bool "KZM-A9-GT board"
 	depends on ARCH_SH73A0
 	select ARCH_REQUIRE_GPIOLIB
-	select USE_OF
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	select SND_SOC_AK4642 if SND_SIMPLE_CARD
+	select USE_OF
 
 comment "SH-Mobile System Configuration"
 

arch/arm/mach-tegra/Kconfig

@@ -4,42 +4,42 @@ comment "NVIDIA Tegra options"
 
 config ARCH_TEGRA_2x_SOC
 	bool "Enable support for Tegra20 family"
-	select CPU_V7
-	select ARM_GIC
 	select ARCH_REQUIRE_GPIOLIB
-	select PINCTRL
-	select PINCTRL_TEGRA20
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB
-	select USB_ULPI_VIEWPORT if USB_SUPPORT
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_742230
 	select ARM_ERRATA_751472
 	select ARM_ERRATA_754327
 	select ARM_ERRATA_764369 if SMP
+	select ARM_GIC
+	select CPU_FREQ_TABLE if CPU_FREQ
+	select CPU_V7
+	select PINCTRL
+	select PINCTRL_TEGRA20
 	select PL310_ERRATA_727915 if CACHE_L2X0
 	select PL310_ERRATA_769419 if CACHE_L2X0
-	select CPU_FREQ_TABLE if CPU_FREQ
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select USB_ULPI if USB
+	select USB_ULPI_VIEWPORT if USB_SUPPORT
 	help
 	  Support for NVIDIA Tegra AP20 and T20 processors, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller
 
 config ARCH_TEGRA_3x_SOC
 	bool "Enable support for Tegra30 family"
-	select CPU_V7
-	select ARM_GIC
 	select ARCH_REQUIRE_GPIOLIB
-	select PINCTRL
-	select PINCTRL_TEGRA30
-	select USB_ARCH_HAS_EHCI if USB_SUPPORT
-	select USB_ULPI if USB
-	select USB_ULPI_VIEWPORT if USB_SUPPORT
 	select ARM_ERRATA_743622
 	select ARM_ERRATA_751472
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
-	select PL310_ERRATA_769419 if CACHE_L2X0
+	select ARM_GIC
 	select CPU_FREQ_TABLE if CPU_FREQ
+	select CPU_V7
+	select PINCTRL
+	select PINCTRL_TEGRA30
+	select PL310_ERRATA_769419 if CACHE_L2X0
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
+	select USB_ULPI if USB
+	select USB_ULPI_VIEWPORT if USB_SUPPORT
 	help
 	  Support for NVIDIA Tegra T30 processor family, based on the
 	  ARM CortexA9MP CPU and the ARM PL310 L2 cache controller

arch/arm/mach-u300/Kconfig

@@ -7,8 +7,8 @@ comment "ST-Ericsson Mobile Platform Products"
 config MACH_U300
 	bool "U300"
 	select PINCTRL
-	select PINCTRL_U300
 	select PINCTRL_COH901
+	select PINCTRL_U300
 
 comment "ST-Ericsson U300/U335 Feature Selections"
 

arch/arm/mach-ux500/Kconfig

@@ -3,33 +3,33 @@ if ARCH_U8500
 config UX500_SOC_COMMON
 	bool
 	default y
-	select ARM_GIC
-	select HAS_MTU
-	select PL310_ERRATA_753970 if CACHE_PL310
 	select ARM_ERRATA_754322
 	select ARM_ERRATA_764369 if SMP
+	select ARM_GIC
 	select CACHE_L2X0
+	select COMMON_CLK
+	select HAS_MTU
 	select PINCTRL
 	select PINCTRL_NOMADIK
-	select COMMON_CLK
+	select PL310_ERRATA_753970 if CACHE_PL310
 
 config UX500_SOC_DB8500
 	bool
+	select CPU_FREQ_TABLE if CPU_FREQ
 	select MFD_DB8500_PRCMU
+	select PINCTRL_DB8500
 	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
-	select CPU_FREQ_TABLE if CPU_FREQ
-	select PINCTRL_DB8500
 
 menu "Ux500 target platform (boards)"
 
 config MACH_MOP500
 	bool "U8500 Development platform, MOP500 versions"
-	select UX500_SOC_DB8500
 	select I2C
 	select I2C_NOMADIK
-	select SOC_BUS
 	select REGULATOR_FIXED_VOLTAGE
+	select SOC_BUS
+	select UX500_SOC_DB8500
 	help
 	  Include support for the MOP500 development platform.
 

arch/arm/mach-versatile/Kconfig

@@ -3,9 +3,9 @@ menu "Versatile platform type"
 
 config ARCH_VERSATILE_PB
 	bool "Support Versatile Platform Baseboard for ARM926EJ-S"
+	default y
 	select CPU_ARM926T
 	select MIGHT_HAVE_PCI
-	default y
 	help
 	  Include support for the ARM(R) Versatile Platform Baseboard
 	  for the ARM926EJ-S.
@@ -19,8 +19,8 @@ config MACH_VERSATILE_AB
 
 config MACH_VERSATILE_DT
 	bool "Support Versatile platform from device tree"
-	select USE_OF
 	select CPU_ARM926T
+	select USE_OF
 	help
 	  Include support for the ARM(R) Versatile/PB platform,
 	  using the device tree for discovery

arch/arm/mm/Kconfig

@@ -10,8 +10,8 @@ config CPU_ARM7TDMI
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
+	select CPU_PABRT_LEGACY
 	help
 	  A 32-bit RISC microprocessor based on the ARM7 processor core
 	  which has no memory control unit and cache.
@@ -24,11 +24,11 @@ config CPU_ARM720T
 	bool "Support ARM720T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WT if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WT if MMU
 	help
 	  A 32-bit RISC processor with 8kByte Cache, Write Buffer and
@@ -43,9 +43,9 @@ config CPU_ARM740T
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V3	# although the core is v4t
 	select CPU_CP15_MPU
+	select CPU_PABRT_LEGACY
 	help
 	  A 32-bit RISC processor with 8KB cache or 4KB variants,
 	  write buffer and MPU(Protection Unit) built around
@@ -60,8 +60,8 @@ config CPU_ARM9TDMI
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
+	select CPU_PABRT_LEGACY
 	help
 	  A 32-bit RISC microprocessor based on the ARM9 processor core
 	  which has no memory control unit and cache.
@@ -74,11 +74,11 @@ config CPU_ARM920T
 	bool "Support ARM920T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM920T is licensed to be produced by numerous vendors,
@@ -92,11 +92,11 @@ config CPU_ARM922T
 	bool "Support ARM922T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM922T is a version of the ARM920T, but with smaller
@@ -111,11 +111,11 @@ config CPU_ARM925T
  	bool "Support ARM925T processor" if ARCH_OMAP1
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
  	help
  	  The ARM925T is a mix between the ARM920T and ARM926T, but with
@@ -130,10 +130,10 @@ config CPU_ARM926T
 	bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 	help
 	  This is a variant of the ARM920.  It has slightly different
@@ -148,11 +148,11 @@ config CPU_FA526
 	bool
 	select CPU_32v4
 	select CPU_ABRT_EV4
-	select CPU_PABRT_LEGACY
-	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_CACHE_FA
+	select CPU_CACHE_VIVT
 	select CPU_COPY_FA if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_FA if MMU
 	help
 	  The FA526 is a version of the ARMv4 compatible processor with
@@ -167,9 +167,9 @@ config CPU_ARM940T
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MPU
+	select CPU_PABRT_LEGACY
 	help
 	  ARM940T is a member of the ARM9TDMI family of general-
 	  purpose microprocessors with MPU and separate 4KB
@@ -185,9 +185,9 @@ config CPU_ARM946E
 	depends on !MMU
 	select CPU_32v5
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MPU
+	select CPU_PABRT_LEGACY
 	help
 	  ARM946E-S is a member of the ARM9E-S family of high-
 	  performance, 32-bit system-on-chip processor solutions.
@@ -201,11 +201,11 @@ config CPU_ARM1020
 	bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM1020 is the 32K cached version of the ARM10 processor,
@@ -217,25 +217,25 @@ config CPU_ARM1020
 # ARM1020E - needs validating
 config CPU_ARM1020E
 	bool "Support ARM1020E processor" if ARCH_INTEGRATOR
+	depends on n
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
-	depends on n
 
 # ARM1022E
 config CPU_ARM1022
 	bool "Support ARM1022E processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM1022E is an implementation of the ARMv5TE architecture
@@ -250,10 +250,10 @@ config CPU_ARM1026
 	bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM1026EJ-S is an implementation of the ARMv5TEJ architecture
@@ -268,11 +268,11 @@ config CPU_SA110
 	select CPU_32v3 if ARCH_RPC
 	select CPU_32v4 if !ARCH_RPC
 	select CPU_ABRT_EV4
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WB if MMU
 	help
 	  The Intel StrongARM(R) SA-110 is a 32-bit microprocessor and
@@ -288,10 +288,10 @@ config CPU_SA1100
 	bool
 	select CPU_32v4
 	select CPU_ABRT_EV4
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WB if MMU
 
 # XScale
@@ -299,9 +299,9 @@ config CPU_XSCALE
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 
 # XScale Core Version 3
@@ -309,9 +309,9 @@ config CPU_XSC3
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
 	select IO_36
 
@@ -320,21 +320,21 @@ config CPU_MOHAWK
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
+	select CPU_COPY_V4WB if MMU
 	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_V4WBI if MMU
-	select CPU_COPY_V4WB if MMU
 
 # Feroceon
 config CPU_FEROCEON
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
-	select CPU_CP15_MMU
 	select CPU_COPY_FEROCEON if MMU
+	select CPU_CP15_MMU
+	select CPU_PABRT_LEGACY
 	select CPU_TLB_FEROCEON if MMU
 
 config CPU_FEROCEON_OLD_ID
@@ -349,20 +349,20 @@ config CPU_FEROCEON_OLD_ID
 # Marvell PJ4
 config CPU_PJ4
 	bool
-	select CPU_V7
 	select ARM_THUMBEE
+	select CPU_V7
 
 # ARMv6
 config CPU_V6
 	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
 	select CPU_32v6
 	select CPU_ABRT_EV6
-	select CPU_PABRT_V6
 	select CPU_CACHE_V6
 	select CPU_CACHE_VIPT
+	select CPU_COPY_V6 if MMU
 	select CPU_CP15_MMU
 	select CPU_HAS_ASID if MMU
-	select CPU_COPY_V6 if MMU
+	select CPU_PABRT_V6
 	select CPU_TLB_V6 if MMU
 
 # ARMv6k
@@ -371,12 +371,12 @@ config CPU_V6K
 	select CPU_32v6
 	select CPU_32v6K
 	select CPU_ABRT_EV6
-	select CPU_PABRT_V6
 	select CPU_CACHE_V6
 	select CPU_CACHE_VIPT
+	select CPU_COPY_V6 if MMU
 	select CPU_CP15_MMU
 	select CPU_HAS_ASID if MMU
-	select CPU_COPY_V6 if MMU
+	select CPU_PABRT_V6
 	select CPU_TLB_V6 if MMU
 
 # ARMv7
@@ -385,44 +385,44 @@ config CPU_V7
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
-	select CPU_PABRT_V7
 	select CPU_CACHE_V7
 	select CPU_CACHE_VIPT
+	select CPU_COPY_V6 if MMU
 	select CPU_CP15_MMU
 	select CPU_HAS_ASID if MMU
-	select CPU_COPY_V6 if MMU
+	select CPU_PABRT_V7
 	select CPU_TLB_V7 if MMU
 
 # Figure out what processor architecture version we should be using.
 # This defines the compiler instruction set which depends on the machine type.
 config CPU_32v3
 	bool
-	select TLS_REG_EMUL if SMP || !MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select CPU_USE_DOMAINS if MMU
+	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+	select TLS_REG_EMUL if SMP || !MMU
 
 config CPU_32v4
 	bool
-	select TLS_REG_EMUL if SMP || !MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select CPU_USE_DOMAINS if MMU
+	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+	select TLS_REG_EMUL if SMP || !MMU
 
 config CPU_32v4T
 	bool
-	select TLS_REG_EMUL if SMP || !MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select CPU_USE_DOMAINS if MMU
+	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+	select TLS_REG_EMUL if SMP || !MMU
 
 config CPU_32v5
 	bool
-	select TLS_REG_EMUL if SMP || !MMU
-	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 	select CPU_USE_DOMAINS if MMU
+	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+	select TLS_REG_EMUL if SMP || !MMU
 
 config CPU_32v6
 	bool
-	select TLS_REG_EMUL if !CPU_32v6K && !MMU
 	select CPU_USE_DOMAINS if CPU_V6 && MMU
+	select TLS_REG_EMUL if !CPU_32v6K && !MMU
 
 config CPU_32v6K
 	bool
@@ -644,8 +644,8 @@ config ARM_VIRT_EXT
 config SWP_EMULATE
 	bool "Emulate SWP/SWPB instructions"
 	depends on !CPU_USE_DOMAINS && CPU_V7
-	select HAVE_PROC_CPU if PROC_FS
 	default y if SMP
+	select HAVE_PROC_CPU if PROC_FS
 	help
 	  ARMv6 architecture deprecates use of the SWP/SWPB instructions.
 	  ARMv7 multiprocessing extensions introduce the ability to disable

arch/arm/plat-mxc/Kconfig

@@ -10,16 +10,16 @@ choice
 
 config ARCH_IMX_V4_V5
 	bool "i.MX1, i.MX21, i.MX25, i.MX27"
-	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
+	select AUTO_ZRELADDR if !ZBOOT_ROM
 	help
 	  This enables support for systems based on the Freescale i.MX ARMv4
 	  and ARMv5 SoCs
 
 config ARCH_IMX_V6_V7
 	bool "i.MX3, i.MX5, i.MX6"
-	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
+	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select MIGHT_HAVE_CACHE_L2X0
 	help
 	  This enables support for systems based on the Freescale i.MX3, i.MX5

arch/arm/plat-mxc/devices/Kconfig

@@ -3,8 +3,8 @@ config IMX_HAVE_PLATFORM_FEC
 	default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53
 
 config IMX_HAVE_PLATFORM_FLEXCAN
-	select HAVE_CAN_FLEXCAN if CAN
 	bool
+	select HAVE_CAN_FLEXCAN if CAN
 
 config IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	bool

arch/arm/plat-nomadik/Kconfig

@@ -5,8 +5,8 @@
 config PLAT_NOMADIK
 	bool
 	depends on ARCH_NOMADIK || ARCH_U8500
-	select CLKSRC_MMIO
 	default y
+	select CLKSRC_MMIO
 	help
 	  Common platform code for Nomadik and other ST-Ericsson
 	  platforms.

arch/arm/plat-omap/Kconfig

@@ -14,10 +14,10 @@ config ARCH_OMAP1
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
-	select IRQ_DOMAIN
 	select HAVE_IDE
-	select NEED_MACH_MEMORY_H
+	select IRQ_DOMAIN
 	select NEED_MACH_IO_H if PCCARD
+	select NEED_MACH_MEMORY_H
 	help
 	  "Systems based on omap7xx, omap15xx or omap16xx"
 
@@ -25,10 +25,10 @@ config ARCH_OMAP2PLUS
 	bool "TI OMAP2/3/4"
 	select CLKDEV_LOOKUP
 	select GENERIC_IRQ_CHIP
-	select SPARSE_IRQ
 	select OMAP_DM_TIMER
-	select USE_OF
 	select PROC_DEVICETREE if PROC_FS
+	select SPARSE_IRQ
+	select USE_OF
 	help
 	  "Systems based on OMAP2, OMAP3, OMAP4 or OMAP5"
 
@@ -43,8 +43,8 @@ config OMAP_DEBUG_DEVICES
 
 config OMAP_DEBUG_LEDS
 	def_bool y if NEW_LEDS
-	select LEDS_CLASS
 	depends on OMAP_DEBUG_DEVICES
+	select LEDS_CLASS
 
 config POWER_AVS_OMAP
 	bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"

arch/arm/plat-s3c24xx/Kconfig

@@ -6,8 +6,8 @@ config PLAT_S3C24XX
 	bool
 	depends on ARCH_S3C24XX
 	default y
-	select NO_IOPORT
 	select ARCH_REQUIRE_GPIOLIB
+	select NO_IOPORT
 	select S3C_DEV_NAND
 	help
 	  Base platform code for any Samsung S3C24XX device

arch/arm/plat-samsung/Kconfig

@@ -7,9 +7,9 @@
 config PLAT_SAMSUNG
 	bool
 	depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
-	select NO_IOPORT
-	select GENERIC_IRQ_CHIP
 	default y
+	select GENERIC_IRQ_CHIP
+	select NO_IOPORT
 	help
 	  Base platform code for all Samsung SoC based systems
 
@@ -17,16 +17,16 @@ config PLAT_S5P
 	bool
 	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
 	default y
-	select ARM_VIC if !ARCH_EXYNOS
+	select ARCH_REQUIRE_GPIOLIB
 	select ARM_GIC if ARCH_EXYNOS
+	select ARM_VIC if !ARCH_EXYNOS
 	select GIC_NON_BANKED if ARCH_EXYNOS4
 	select NO_IOPORT
-	select ARCH_REQUIRE_GPIOLIB
+	select PLAT_SAMSUNG
 	select S3C_GPIO_TRACK
 	select S5P_GPIO_DRVSTR
-	select SAMSUNG_GPIOLIB_4BIT
-	select PLAT_SAMSUNG
 	select SAMSUNG_CLKSRC
+	select SAMSUNG_GPIOLIB_4BIT
 	select SAMSUNG_IRQ_VIC_TIMER
 	help
 	  Base platform code for Samsung's S5P series SoC.
@@ -423,10 +423,10 @@ config S3C_DMA
 
 config SAMSUNG_DMADEV
 	bool
+	select ARM_AMBA
 	select DMADEVICES
 	select PL330_DMA if (ARCH_EXYNOS5 || ARCH_EXYNOS4 || CPU_S5PV210 || CPU_S5PC100 || \
 					CPU_S5P6450 || CPU_S5P6440)
-	select ARM_AMBA
 	help
 	  Use DMA device engine for PL330 DMAC.
 

arch/arm/plat-spear/Kconfig

@@ -12,10 +12,10 @@ config ARCH_SPEAR13XX
 	bool "ST SPEAr13xx with Device Tree"
 	select ARM_GIC
 	select CPU_V7
-	select USE_OF
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select PINCTRL
+	select USE_OF
 	help
 	  Supports for ARM's SPEAR13XX family
 
@@ -23,8 +23,8 @@ config ARCH_SPEAR3XX
 	bool "ST SPEAr3xx with Device Tree"
 	select ARM_VIC
 	select CPU_ARM926T
-	select USE_OF
 	select PINCTRL
+	select USE_OF
 	help
 	  Supports for ARM's SPEAR3XX family