Merge with /pub/scm/linux/kernel/git/torvalds/linux-2.6.git

CREDITS

@@ -882,13 +882,12 @@ S: Blacksburg, Virginia 24061
 S: USA
 
 N: Randy Dunlap
-E: rddunlap@osdl.org
+E: rdunlap@xenotime.net
 W: http://www.xenotime.net/linux/linux.html
 W: http://www.linux-usb.org
 D: Linux-USB subsystem, USB core/UHCI/printer/storage drivers
 D: x86 SMP, ACPI, bootflag hacking
-S: 12725 SW Millikan Way, Suite 400
-S: Beaverton, Oregon 97005
+S: (ask for current address)
 S: USA
 
 N: Bob Dunlop

Documentation/cpusets.txt

@@ -252,8 +252,7 @@ in a tasks processor placement.
 There is an exception to the above.  If hotplug funtionality is used
 to remove all the CPUs that are currently assigned to a cpuset,
 then the kernel will automatically update the cpus_allowed of all
-tasks attached to CPUs in that cpuset with the online CPUs of the
-nearest parent cpuset that still has some CPUs online.  When memory
+tasks attached to CPUs in that cpuset to allow all CPUs.  When memory
 hotplug functionality for removing Memory Nodes is available, a
 similar exception is expected to apply there as well.  In general,
 the kernel prefers to violate cpuset placement, over starving a task

Documentation/dvb/README.flexcop

@@ -0,0 +1,205 @@
+This README escorted the skystar2-driver rewriting procedure. It describes the
+state of the new flexcop-driver set and some internals are written down here
+too.
+
+This document hopefully describes things about the flexcop and its
+device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
+drivers based on the skystar2.c and other information.
+
+Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
+touched and rewritten.
+
+History & News
+==============
+  2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
+
+
+
+
+General coding processing
+=========================
+
+We should proceed as follows (as long as no one complains):
+
+0) Think before start writing code!
+
+1) rewriting the skystar2.c with the help of the flexcop register descriptions
+and splitting up the files to a pci-bus-part and a flexcop-part.
+The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
+device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
+
+2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
+and other pci drivers)
+
+3) make some beautification (see 'Improvements when rewriting (refactoring) is
+done')
+
+4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
+a wider tester audience.
+
+5) creating an usb-bus-part using the already written flexcop code for the pci
+card.
+
+Idea: create a kernel-object for the flexcop and export all important
+functions. This option saves kernel-memory, but maybe a lot of functions have
+to be exported to kernel namespace.
+
+
+Current situation
+=================
+
+0) Done :)
+1) Done (some minor issues left)
+2) Done
+3) Not ready yet, more information is necessary
+4) next to be done (see the table below)
+5) USB driver is working (yes, there are some minor issues)
+
+What seems to be ready?
+-----------------------
+
+1) Rewriting
+1a) i2c is cut off from the flexcop-pci.c and seems to work
+1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
+1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
+1e) eeprom (reading MAC address)
+1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
+1f) misc. register accesses for reading parameters (e.g. resetting, revision)
+1g) pid/mac filter (flexcop-hw-filter.c)
+1i) dvb-stuff initialization in flexcop.c (done)
+1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
+1j) remove flexcop initialization from flexcop-pci.c completely (done)
+1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
+1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
+non-static where possible, moved code to proper places)
+
+2) Search for errors in the leftover of flexcop-pci.c (partially done)
+5a) add MAC address reading
+5c) feeding of ISOC data to the software demux (format of the isochronous data
+and speed optimization, no real error) (thanks to Vadim Catana)
+
+What to do in the near future?
+--------------------------------------
+(no special order here)
+
+5) USB driver
+5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
+
+Testing changes
+---------------
+
+O             = item is working
+P             = item is partially working
+X             = item is not working
+N             = item does not apply here
+<empty field> = item need to be examined
+
+       | PCI                               | USB
+item   | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
+-------+-------+---------+---------+-------+-------+---------+---------+-------
+1a)    | O     |         |         |       | N     | N       | N       | N
+1b)    | O     |         |         |       |       |         | O       |
+1c)    | N     | N       |         |       | N     | N       | O       |
+1d)    |                 O                 |                 O
+1e)    |                 O                 |                 O
+1f)    |                                   P
+1g)    |                                   O
+1h)    |                 P                 |
+1i)    |                 O                 |                 N
+1j)    |                 O                 |                 N
+1l)    |                 O                 |                 N
+2)     |                 O                 |                 N
+5a)    |                 N                 |                 O
+5b)*   |                 N                 |
+5c)    |                 N                 |                 O
+
+* - not done yet
+
+Known bugs and problems and TODO
+--------------------------------
+
+1g/h/l) when pid filtering is enabled on the pci card
+
+DMA usage currently:
+  The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
+  address and triggers an IRQ when it's full and starts writing to the second
+  address. When the second address is full, the IRQ is triggered again, and
+  the flexcop writes to first address again, and so on.
+  The buffersize of each address is currently 640*188 bytes.
+
+  Problem is, when using hw-pid-filtering and doing some low-bandwidth
+  operation (like scanning) the buffers won't be filled enough to trigger
+  the IRQ. That's why:
+
+  When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
+  is triggered.  Is the current write address of DMA1 different to the one
+  during the last IRQ, then the data is passed to the demuxer.
+
+  There is an additional DMA-IRQ-method: packet count IRQ. This isn't
+  implemented correctly yet.
+
+  The solution is to disable HW PID filtering, but I don't know how the DVB
+  API software demux behaves on slow systems with 45MBit/s TS.
+
+Solved bugs :)
+--------------
+1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
+working)
+SOLUTION: also index 0 was affected, because net_translation is done for
+these indexes by default
+
+5b) isochronous transfer does only work in the first attempt (for the Sky2PC
+USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
+woke up again (don't know if this need fixes, see
+flexcop-fe-tuner.c:flexcop_sleep)
+
+NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
+anything in the while the driver is loaded the first time), no transfers take
+place anymore.
+
+Improvements when rewriting (refactoring) is done
+=================================================
+
+- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
+  (enable sleeping for other demods than dvb-s)
+- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
+
+Debugging
+---------
+- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
+  with this flexcop, this is important, because i2c is now using the
+  flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
+  that, please tell us so).
+
+Everything which is identical in the following table, can be put into a common
+flexcop-module.
+
+                  PCI                  USB
+-------------------------------------------------------------------------------
+Different:
+Register access:  accessing IO memory  USB control message
+I2C bus:          I2C bus of the FC    USB control message
+Data transfer:    DMA                  isochronous transfer
+EEPROM transfer:  through i2c bus      not clear yet
+
+Identical:
+Streaming:                 accessing registers
+PID Filtering:             accessing registers
+Sram destinations:         accessing registers
+Tuner/Demod:                     I2C bus
+DVB-stuff:            can be written for common use
+
+Acknowledgements (just for the rewriting part)
+================
+
+Bjarne Steinsbo thought a lot in the first place of the pci part for this code
+sharing idea.
+
+Andreas Oberritter for providing a recent PCI initialization template
+(pluto2.c).
+
+Boleslaw Ciesielski for pointing out a problem with firmware loader.
+
+Vadim Catana for correcting the USB transfer.
+
+comments, critics and ideas to linux-dvb@linuxtv.org.

Documentation/dvb/bt8xx.txt

@@ -17,74 +17,53 @@ Because of this, you need to enable
 "Device drivers" => "Multimedia devices"
   => "Video For Linux" => "BT848 Video For Linux"
 
+Furthermore you need to enable
+"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
+  => "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards"
+
 2) Loading Modules
 ==================
 
 In general you need to load the bttv driver, which will handle the gpio and
-i2c communication for us. Next you need the common dvb-bt8xx device driver
-and one frontend driver.
-
-The bttv driver will HANG YOUR SYSTEM IF YOU DO NOT SPECIFY THE CORRECT 
-CARD ID!
-
-(If you don't get your card running and you suspect that the card id you're
-using is wrong, have a look at "bttv-cards.c" for a list of possible card
-ids.)
-
-Pay attention to failures when you load the frontend drivers
-(e.g. dmesg, /var/log/messages).
+i2c communication for us, plus the common dvb-bt8xx device driver.
+The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and
+TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver.
 
 3a) Nebula / Pinnacle PCTV
 --------------------------
 
-   $ modprobe bttv i2c_hw=1 card=0x68
-   $ modprobe dvb-bt8xx
-   
-For Nebula cards use the "nxt6000" frontend driver:
-   $ modprobe nxt6000
+   $ modprobe bttv (normally bttv is being loaded automatically by kmod)
+   $ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading)
 
-For Pinnacle PCTV cards use the "cx24110" frontend driver:
-   $ modprobe cx24110
 
-3b) TwinHan
------------
+3b) TwinHan and Clones
+--------------------------
 
    $ modprobe bttv i2c_hw=1 card=0x71
    $ modprobe dvb-bt8xx
    $ modprobe dst
 
-The value 0x71 will override the PCI type detection for dvb-bt8xx, which 
-is necessary for TwinHan cards.#
+The value 0x71 will override the PCI type detection for dvb-bt8xx,
+which  is necessary for TwinHan cards.
 
-If you're having an older card (blue color circuit) and card=0x71 locks your
-machine, try using 0x68, too. If that does not work, ask on the DVB mailing list.
+If you're having an older card (blue color circuit) and card=0x71 locks
+your machine, try using 0x68, too. If that does not work, ask on the
+mailing list.
 
-The DST module takes a couple of useful parameters, in case the
-dst drivers fails to detect your type of card correctly.
+The DST module takes a couple of useful parameters.
 
-dst_type takes values 0 (satellite), 1 (terrestial TV), 2 (cable).
+verbose takes values 0 to 5. These values control the verbosity level.
 
-dst_type_flags takes bit combined values:
-1 = new tuner type packets. You can use this if your card is detected
-    and you have debug and you continually see the tuner packets not
-    working (make sure not a basic problem like dish alignment etc.)
+debug takes values 0 and 1. You can either disable or enable debugging.
 
-2 = TS 204. If your card tunes OK, but the picture is terrible, seemingly
-    breaking up in one half continually, and crc fails a lot, then
-    this is worth a try (or trying to turn off)
+dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
+0x20 means it has a Conditional Access slot.
 
-4 = has symdiv. Some cards, mostly without new tuner packets, require
-    a symbol division algorithm. Doesn't apply to terrestial TV.
-
-You can also specify a value to have the autodetected values turned off
-(e.g. 0). The autodected values are determined bythe cards 'response
+The autodected values are determined bythe cards 'response
 string' which you can see in your logs e.g.
 
-dst_check_ci: recognize DST-MOT
-
-or 
+dst_get_device_id: Recognise [DSTMCI]
 
-dst_check_ci: unable to recognize DSTXCI or STXCI
 
 --
-Authors: Richard Walker, Jamie Honan, Michael Hunold
+Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham

Documentation/dvb/ci.txt

@@ -0,0 +1,219 @@
+* For the user
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+NOTE: This document describes the usage of the high level CI API as
+in accordance to the Linux DVB API. This is a not a documentation for the,
+existing low level CI API.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To utilize the High Level CI capabilities,
+
+(1*) This point is valid only for the Twinhan/clones
+  For the Twinhan/Twinhan clones, the dst_ca module handles the CI
+  hardware handling.This module is loaded automatically if a CI
+  (Common Interface, that holds the CAM (Conditional Access Module)
+  is detected.
+
+(2) one requires a userspace application, ca_zap. This small userland
+  application is in charge of sending the descrambling related information
+  to the CAM.
+
+This application requires the following to function properly as of now.
+
+	(a) Tune to a valid channel, with szap.
+	  eg: $ szap -c channels.conf -r "TMC" -x
+
+	(b) a channels.conf containing a valid PMT PID
+
+	  eg: TMC:11996:h:0:27500:278:512:650:321
+
+	  here 278 is a valid PMT PID. the rest of the values are the
+	  same ones that szap uses.
+
+	(c) after running a szap, you have to run ca_zap, for the
+	  descrambler to function,
+
+	  eg: $ ca_zap patched_channels.conf "TMC"
+
+	  The patched means a patch to apply to scan, such that scan can
+	  generate a channels.conf_with pmt, which has this PMT PID info
+	  (NOTE: szap cannot use this channels.conf with the PMT_PID)
+
+
+	(d) Hopeflly Enjoy your favourite subscribed channel as you do with
+	  a FTA card.
+
+(3) Currently ca_zap, and dst_test, both are meant for demonstration
+  purposes only, they can become full fledged applications if necessary.
+
+
+* Cards that fall in this category
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+At present the cards that fall in this category are the Twinhan and it's
+clones, these cards are available as VVMER, Tomato, Hercules, Orange and
+so on.
+
+* CI modules that are supported
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The CI module support is largely dependant upon the firmware on the cards
+Some cards do support almost all of the available CI modules. There is
+nothing much that can be done in order to make additional CI modules
+working with these cards.
+
+Modules that have been tested by this driver at present are
+
+(1) Irdeto 1 and 2 from SCM
+(2) Viaccess from SCM
+(3) Dragoncam
+
+* The High level CI API
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+* For the programmer
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+With the High Level CI approach any new card with almost any random
+architecture can be implemented with this style, the definitions
+insidethe switch statement can be easily adapted for any card, thereby
+eliminating the need for any additional ioctls.
+
+The disadvantage is that the driver/hardware has to manage the rest. For
+the application programmer it would be as simple as sending/receiving an
+array to/from the CI ioctls as defined in the Linux DVB API. No changes
+have been made in the API to accomodate this feature.
+
+
+* Why the need for another CI interface ?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+This is one of the most commonly asked question. Well a nice question.
+Strictly speaking this is not a new interface.
+
+The CI interface is defined in the DVB API in ca.h as
+
+typedef struct ca_slot_info {
+	int num;               /* slot number */
+
+	int type;              /* CA interface this slot supports */
+#define CA_CI            1     /* CI high level interface */
+#define CA_CI_LINK       2     /* CI link layer level interface */
+#define CA_CI_PHYS       4     /* CI physical layer level interface */
+#define CA_DESCR         8     /* built-in descrambler */
+#define CA_SC          128     /* simple smart card interface */
+
+	unsigned int flags;
+#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */
+#define CA_CI_MODULE_READY   2
+} ca_slot_info_t;
+
+
+
+This CI interface follows the CI high level interface, which is not
+implemented by most applications. Hence this area is revisited.
+
+This CI interface is quite different in the case that it tries to
+accomodate all other CI based devices, that fall into the other categories
+
+This means that this CI interface handles the EN50221 style tags in the
+Application layer only and no session management is taken care of by the
+application. The driver/hardware will take care of all that.
+
+This interface is purely an EN50221 interface exchanging APDU's. This
+means that no session management, link layer or a transport layer do
+exist in this case in the application to driver communication. It is
+as simple as that. The driver/hardware has to take care of that.
+
+
+With this High Level CI interface, the interface can be defined with the
+regular ioctls.
+
+All these ioctls are also valid for the High level CI interface
+
+#define CA_RESET          _IO('o', 128)
+#define CA_GET_CAP        _IOR('o', 129, ca_caps_t)
+#define CA_GET_SLOT_INFO  _IOR('o', 130, ca_slot_info_t)
+#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t)
+#define CA_GET_MSG        _IOR('o', 132, ca_msg_t)
+#define CA_SEND_MSG       _IOW('o', 133, ca_msg_t)
+#define CA_SET_DESCR      _IOW('o', 134, ca_descr_t)
+#define CA_SET_PID        _IOW('o', 135, ca_pid_t)
+
+
+On querying the device, the device yields information thus
+
+CA_GET_SLOT_INFO
+----------------------------
+Command = [info]
+APP: Number=[1]
+APP: Type=[1]
+APP: flags=[1]
+APP: CI High level interface
+APP: CA/CI Module Present
+
+CA_GET_CAP
+----------------------------
+Command = [caps]
+APP: Slots=[1]
+APP: Type=[1]
+APP: Descrambler keys=[16]
+APP: Type=[1]
+
+CA_SEND_MSG
+----------------------------
+Descriptors(Program Level)=[ 09 06 06 04 05 50 ff f1]
+Found CA descriptor @ program level
+
+(20) ES type=[2] ES pid=[201]  ES length =[0 (0x0)]
+(25) ES type=[4] ES pid=[301]  ES length =[0 (0x0)]
+ca_message length is 25 (0x19) bytes
+EN50221 CA MSG=[ 9f 80 32 19 03 01 2d d1 f0 08 01 09 06 06 04 05 50 ff f1 02 e0 c9 00 00 04 e1 2d 00 00]
+
+
+Not all ioctl's are implemented in the driver from the API, the other
+features of the hardware that cannot be implemented by the API are achieved
+using the CA_GET_MSG and CA_SEND_MSG ioctls. An EN50221 style wrapper is
+used to exchange the data to maintain compatibility with other hardware.
+
+
+/* a message to/from a CI-CAM */
+typedef struct ca_msg {
+	unsigned int index;
+	unsigned int type;
+	unsigned int length;
+	unsigned char msg[256];
+} ca_msg_t;
+
+
+The flow of data can be described thus,
+
+
+
+
+
+	App (User)
+	-----
+	parse
+	  |
+	  |
+	  v
+	en50221 APDU (package)
+   --------------------------------------
+   |	  |				| High Level CI driver
+   |	  |				|
+   |	  v				|
+   |	en50221 APDU (unpackage)	|
+   |	  |				|
+   |	  |				|
+   |	  v				|
+   |	sanity checks			|
+   |	  |				|
+   |	  |				|
+   |	  v				|
+   |	do (H/W dep)			|
+   --------------------------------------
+	  |    Hardware
+	  |
+	  v
+
+
+
+
+The High Level CI interface uses the EN50221 DVB standard, following a
+standard ensures futureproofness.

Documentation/dvb/get_dvb_firmware

@@ -107,7 +107,7 @@ sub tda10045 {
 sub tda10046 {
     my $sourcefile = "tt_budget_217g.zip";
     my $url = "http://www.technotrend.de/new/217g/$sourcefile";
-    my $hash = "a25b579e37109af60f4a36c37893957c";
+    my $hash = "6a7e1e2f2644b162ff0502367553c72d";
     my $outfile = "dvb-fe-tda10046.fw";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
 
@@ -115,7 +115,7 @@ sub tda10046 {
 
     wgetfile($sourcefile, $url);
     unzip($sourcefile, $tmpdir);
-    extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x3f731, 24479, "$tmpdir/fwtmp");
+    extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x3f731, 24478, "$tmpdir/fwtmp");
     verify("$tmpdir/fwtmp", $hash);
     copy("$tmpdir/fwtmp", $outfile);
 

Documentation/feature-removal-schedule.txt

@@ -63,3 +63,23 @@ Why:	Outside of Linux, the only implementations of anything even
 	people, who might be using implementations that I am not aware
 	of, to adjust to this upcoming change.
 Who:	Paul E. McKenney <paulmck@us.ibm.com>
+
+---------------------------
+
+What:	IEEE1394 Audio and Music Data Transmission Protocol driver,
+	Connection Management Procedures driver
+When:	November 2005
+Files:	drivers/ieee1394/{amdtp,cmp}*
+Why:	These are incomplete, have never worked, and are better implemented
+	in userland via raw1394 (see http://freebob.sourceforge.net/ for
+	example.)
+Who:	Jody McIntyre <scjody@steamballoon.com>
+
+---------------------------
+
+What:	raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
+When:	November 2005
+Why:	Deprecated in favour of the new ioctl-based rawiso interface, which is
+	more efficient.  You should really be using libraw1394 for raw1394
+	access anyway.
+Who:	Jody McIntyre <scjody@steamballoon.com>

Documentation/filesystems/sysfs-pci.txt

@@ -7,7 +7,6 @@ that support it.  For example, a given bus might look like this:
      |-- 0000:17:00.0
      |   |-- class
      |   |-- config
-     |   |-- detach_state
      |   |-- device
      |   |-- irq
      |   |-- local_cpus
@@ -19,7 +18,7 @@ that support it.  For example, a given bus might look like this:
      |   |-- subsystem_device
      |   |-- subsystem_vendor
      |   `-- vendor
-     `-- detach_state
+     `-- ...
 
 The topmost element describes the PCI domain and bus number.  In this case,
 the domain number is 0000 and the bus number is 17 (both values are in hex).
@@ -31,7 +30,6 @@ files, each with their own function.
        ----		   --------
        class		   PCI class (ascii, ro)
        config		   PCI config space (binary, rw)
-       detach_state	   connection status (bool, rw)
        device		   PCI device (ascii, ro)
        irq		   IRQ number (ascii, ro)
        local_cpus	   nearby CPU mask (cpumask, ro)
@@ -85,4 +83,4 @@ useful return codes should be provided.
 
 Legacy resources are protected by the HAVE_PCI_LEGACY define.  Platforms
 wishing to support legacy functionality should define it and provide
-pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.
+pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.

Documentation/power/devices.txt

@@ -207,27 +207,6 @@ SYSTEM_SHUTDOWN, I do not understand this one too much. probably event
 #READY_AFTER_RESUME
 #
 
-Driver Detach Power Management
-
-The kernel now supports the ability to place a device in a low-power
-state when it is detached from its driver, which happens when its
-module is removed. 
-
-Each device contains a 'detach_state' file in its sysfs directory
-which can be used to control this state. Reading from this file
-displays what the current detach state is set to. This is 0 (On) by
-default. A user may write a positive integer value to this file in the
-range of 1-4 inclusive. 
-
-A value of 1-3 will indicate the device should be placed in that
-low-power state, which will cause ->suspend() to be called for that
-device. A value of 4 indicates that the device should be shutdown, so
-->shutdown() will be called for that device. 
-
-The driver is responsible for reinitializing the device when the
-module is re-inserted during it's ->probe() (or equivalent) method. 
-The driver core will not call any extra functions when binding the
-device to the driver. 
 
 pm_message_t meaning
 

Documentation/powerpc/hvcs.txt

@@ -347,8 +347,8 @@ address that is created by firmware.  An example vty-server sysfs entry
 looks like the following:
 
 	Pow5:/sys/bus/vio/drivers/hvcs/30000004 # ls
-	.   current_vty   devspec  name          partner_vtys
-	..  detach_state  index    partner_clcs  vterm_state
+	.   current_vty   devspec       name          partner_vtys
+	..  index         partner_clcs  vterm_state
 
 Each entry is provided, by default with a "name" attribute.  Reading the
 "name" attribute will reveal the device type as shown in the following

Documentation/x86_64/boot-options.txt

@@ -25,6 +25,9 @@ APICs
 
    noapictimer	 Don't set up the APIC timer
 
+   no_timer_check Don't check the IO-APIC timer. This can work around
+		 problems with incorrect timer initialization on some boards.
+
 Early Console
 
    syntax: earlyprintk=vga

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 12
-EXTRAVERSION =-rc3
+EXTRAVERSION =-rc5
 NAME=Woozy Numbat
 
 # *DOCUMENTATION*
@@ -530,7 +530,7 @@ endif
 include $(srctree)/arch/$(ARCH)/Makefile
 
 # arch Makefile may override CC so keep this after arch Makefile is included
-NOSTDINC_FLAGS := -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
 CHECKFLAGS     += $(NOSTDINC_FLAGS)
 
 # warn about C99 declaration after statement

arch/alpha/kernel/osf_sys.c

@@ -1150,16 +1150,13 @@ osf_usleep_thread(struct timeval32 __user *sleep, struct timeval32 __user *remai
 	if (get_tv32(&tmp, sleep))
 		goto fault;
 
-	ticks = tmp.tv_usec;
-	ticks = (ticks + (1000000 / HZ) - 1) / (1000000 / HZ);
-	ticks += tmp.tv_sec * HZ;
+	ticks = timeval_to_jiffies(&tmp);
 
 	current->state = TASK_INTERRUPTIBLE;
 	ticks = schedule_timeout(ticks);
 
 	if (remain) {
-		tmp.tv_sec = ticks / HZ;
-		tmp.tv_usec = ticks % HZ;
+		jiffies_to_timeval(ticks, &tmp);
 		if (put_tv32(remain, &tmp))
 			goto fault;
 	}

arch/arm/mach-s3c2410/clock.c

@@ -478,7 +478,7 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
 {
 	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
 
-	s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate) * 2;
+	s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate);
 
 	printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n",
 	       print_mhz(s3c2440_clk_upll.rate));

arch/arm/mach-s3c2410/s3c2440.c

@@ -192,9 +192,11 @@ void __init s3c2440_map_io(struct map_desc *mach_desc, int size)
 
 	iotable_init(s3c2440_iodesc, ARRAY_SIZE(s3c2440_iodesc));
 	iotable_init(mach_desc, size);
+
 	/* rename any peripherals used differing from the s3c2410 */
 
-	s3c_device_i2c.name = "s3c2440-i2c";
+	s3c_device_i2c.name  = "s3c2440-i2c";
+	s3c_device_nand.name = "s3c2440-nand";
 
 	/* change irq for watchdog */
 
@@ -225,7 +227,7 @@ void __init s3c2440_init_clocks(int xtal)
 		break;
 
 	case S3C2440_CLKDIVN_HDIVN_2:
-		hdiv = 1;
+		hdiv = 2;
 		break;
 
 	case S3C2440_CLKDIVN_HDIVN_4_8:

arch/arm/mm/Kconfig

@@ -412,21 +412,20 @@ config CPU_BPREDICT_DISABLE
 
 config TLS_REG_EMUL
 	bool
-	default y if (SMP || CPU_32v6) && (CPU_32v5 || CPU_32v4 || CPU_32v3)
+	default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3)
 	help
-	  We might be running on an ARMv6+ processor which should have the TLS
-	  register but for some reason we can't use it, or maybe an SMP system
-	  using a pre-ARMv6 processor (there are apparently a few prototypes
-	  like that in existence) and therefore access to that register must
-	  be emulated.
+	  An SMP system using a pre-ARMv6 processor (there are apparently
+	  a few prototypes like that in existence) and therefore access to
+	  that required register must be emulated.
 
 config HAS_TLS_REG
 	bool
-	depends on CPU_32v6
-	default y if !TLS_REG_EMUL
+	depends on !TLS_REG_EMUL
+	default y if SMP || CPU_32v7
 	help
 	  This selects support for the CP15 thread register.
-	  It is defined to be available on ARMv6 or later.  If a particular
-	  ARMv6 or later CPU doesn't support it then it must omc;ide "select
-	  TLS_REG_EMUL" along with its other caracteristics.
+	  It is defined to be available on some ARMv6 processors (including
+	  all SMP capable ARMv6's) or later processors.  User space may
+	  assume directly accessing that register and always obtain the
+	  expected value only on ARMv7 and above.
 

arch/arm/mm/copypage-v4mc.S

@@ -1,80 +0,0 @@
-/*
- *  linux/arch/arm/lib/copy_page-armv4mc.S
- *
- *  Copyright (C) 1995-2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ASM optimised string functions
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/constants.h>
-
-	.text
-	.align	5
-/*
- * ARMv4 mini-dcache optimised copy_user_page
- *
- * We flush the destination cache lines just before we write the data into the
- * corresponding address.  Since the Dcache is read-allocate, this removes the
- * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
- * and merged as appropriate.
- *
- * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
- * instruction.  If your processor does not supply this, you have to write your
- * own copy_user_page that does the right thing.
- */
-ENTRY(v4_mc_copy_user_page)
-	stmfd	sp!, {r4, lr}			@ 2
-	mov	r4, r0
-	mov	r0, r1
-	bl	map_page_minicache
-	mov	r1, #PAGE_SZ/64			@ 1
-	ldmia	r0!, {r2, r3, ip, lr}		@ 4
-1:	mcr	p15, 0, r4, c7, c6, 1		@ 1   invalidate D line
-	stmia	r4!, {r2, r3, ip, lr}		@ 4
-	ldmia	r0!, {r2, r3, ip, lr}		@ 4+1
-	stmia	r4!, {r2, r3, ip, lr}		@ 4
-	ldmia	r0!, {r2, r3, ip, lr}		@ 4
-	mcr	p15, 0, r4, c7, c6, 1		@ 1   invalidate D line
-	stmia	r4!, {r2, r3, ip, lr}		@ 4
-	ldmia	r0!, {r2, r3, ip, lr}		@ 4
-	subs	r1, r1, #1			@ 1
-	stmia	r4!, {r2, r3, ip, lr}		@ 4
-	ldmneia	r0!, {r2, r3, ip, lr}		@ 4
-	bne	1b				@ 1
-	ldmfd	sp!, {r4, pc}			@ 3
-
-	.align	5
-/*
- * ARMv4 optimised clear_user_page
- *
- * Same story as above.
- */
-ENTRY(v4_mc_clear_user_page)
-	str	lr, [sp, #-4]!
-	mov	r1, #PAGE_SZ/64			@ 1
-	mov	r2, #0				@ 1
-	mov	r3, #0				@ 1
-	mov	ip, #0				@ 1
-	mov	lr, #0				@ 1
-1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line
-	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line
-	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	stmia	r0!, {r2, r3, ip, lr}		@ 4
-	subs	r1, r1, #1			@ 1
-	bne	1b				@ 1
-	ldr	pc, [sp], #4
-
-	__INITDATA
-
-	.type	v4_mc_user_fns, #object
-ENTRY(v4_mc_user_fns)
-	.long	v4_mc_clear_user_page
-	.long	v4_mc_copy_user_page
-	.size	v4_mc_user_fns, . - v4_mc_user_fns

arch/arm/mm/copypage-v4mc.c

@@ -0,0 +1,111 @@
+/*
+ *  linux/arch/arm/lib/copypage-armv4mc.S
+ *
+ *  Copyright (C) 1995-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This handles the mini data cache, as found on SA11x0 and XScale
+ * processors.  When we copy a user page page, we map it in such a way
+ * that accesses to this page will not touch the main data cache, but
+ * will be cached in the mini data cache.  This prevents us thrashing
+ * the main data cache on page faults.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+/*
+ * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
+ * specific hacks for copying pages efficiently.
+ */
+#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
+				  L_PTE_CACHEABLE)
+
+#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
+
+static DEFINE_SPINLOCK(minicache_lock);
+
+/*
+ * ARMv4 mini-dcache optimised copy_user_page
+ *
+ * We flush the destination cache lines just before we write the data into the
+ * corresponding address.  Since the Dcache is read-allocate, this removes the
+ * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
+ * and merged as appropriate.
+ *
+ * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
+ * instruction.  If your processor does not supply this, you have to write your
+ * own copy_user_page that does the right thing.
+ */
+static void __attribute__((naked))
+mc_copy_user_page(void *from, void *to)
+{
+	asm volatile(
+	"stmfd	sp!, {r4, lr}			@ 2\n\
+	mov	r4, %2				@ 1\n\
+	ldmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+1:	mcr	p15, 0, %1, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
+	ldmia	%0!, {r2, r3, ip, lr}		@ 4+1\n\
+	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
+	ldmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	mcr	p15, 0, %1, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
+	ldmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	subs	r4, r4, #1			@ 1\n\
+	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
+	ldmneia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	bne	1b				@ 1\n\
+	ldmfd	sp!, {r4, pc}			@ 3"
+	:
+	: "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
+}
+
+void v4_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
+{
+	spin_lock(&minicache_lock);
+
+	set_pte(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot));
+	flush_tlb_kernel_page(0xffff8000);
+
+	mc_copy_user_page((void *)0xffff8000, kto);
+
+	spin_unlock(&minicache_lock);
+}
+
+/*
+ * ARMv4 optimised clear_user_page
+ */
+void __attribute__((naked))
+v4_mc_clear_user_page(void *kaddr, unsigned long vaddr)
+{
+	asm volatile(
+	"str	lr, [sp, #-4]!\n\
+	mov	r1, %0				@ 1\n\
+	mov	r2, #0				@ 1\n\
+	mov	r3, #0				@ 1\n\
+	mov	ip, #0				@ 1\n\
+	mov	lr, #0				@ 1\n\
+1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	r0!, {r2, r3, ip, lr}		@ 4\n\
+	stmia	r0!, {r2, r3, ip, lr}		@ 4\n\
+	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	r0!, {r2, r3, ip, lr}		@ 4\n\
+	stmia	r0!, {r2, r3, ip, lr}		@ 4\n\
+	subs	r1, r1, #1			@ 1\n\
+	bne	1b				@ 1\n\
+	ldr	pc, [sp], #4"
+	:
+	: "I" (PAGE_SIZE / 64));
+}
+
+struct cpu_user_fns v4_mc_user_fns __initdata = {
+	.cpu_clear_user_page	= v4_mc_clear_user_page, 
+	.cpu_copy_user_page	= v4_mc_copy_user_page,
+};

arch/arm/mm/copypage-v6.c

@@ -26,8 +26,8 @@
 #define to_address	(0xffffc000)
 #define to_pgprot	PAGE_KERNEL
 
-static pte_t *from_pte;
-static pte_t *to_pte;
+#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
+
 static DEFINE_SPINLOCK(v6_lock);
 
 #define DCACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
@@ -74,8 +74,8 @@ void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vadd
 	 */
 	spin_lock(&v6_lock);
 
-	set_pte(from_pte + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot));
-	set_pte(to_pte + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot));
+	set_pte(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot));
+	set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot));
 
 	from = from_address + (offset << PAGE_SHIFT);
 	to   = to_address + (offset << PAGE_SHIFT);
@@ -114,7 +114,7 @@ void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
 	 */
 	spin_lock(&v6_lock);
 
-	set_pte(to_pte + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot));
+	set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot));
 	flush_tlb_kernel_page(to);
 	clear_page((void *)to);
 
@@ -129,21 +129,6 @@ struct cpu_user_fns v6_user_fns __initdata = {
 static int __init v6_userpage_init(void)
 {
 	if (cache_is_vipt_aliasing()) {
-		pgd_t *pgd;
-		pmd_t *pmd;
-
-		pgd = pgd_offset_k(from_address);
-		pmd = pmd_alloc(&init_mm, pgd, from_address);
-		if (!pmd)
-			BUG();
-		from_pte = pte_alloc_kernel(&init_mm, pmd, from_address);
-		if (!from_pte)
-			BUG();
-
-		to_pte = pte_alloc_kernel(&init_mm, pmd, to_address);
-		if (!to_pte)
-			BUG();
-
 		cpu_user.cpu_clear_user_page = v6_clear_user_page_aliasing;
 		cpu_user.cpu_copy_user_page = v6_copy_user_page_aliasing;
 	}
@@ -151,5 +136,4 @@ static int __init v6_userpage_init(void)
 	return 0;
 }
 
-__initcall(v6_userpage_init);
-
+core_initcall(v6_userpage_init);

arch/arm/mm/flush.c

@@ -13,6 +13,29 @@
 
 #include <asm/cacheflush.h>
 #include <asm/system.h>
+#include <asm/tlbflush.h>
+
+#ifdef CONFIG_CPU_CACHE_VIPT
+#define ALIAS_FLUSH_START	0xffff4000
+
+#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
+
+static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
+{
+	unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
+
+	set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL));
+	flush_tlb_kernel_page(to);
+
+	asm(	"mcrr	p15, 0, %1, %0, c14\n"
+	"	mcrr	p15, 0, %1, %0, c5\n"
+	    :
+	    : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES)
+	    : "cc");
+}
+#else
+#define flush_pfn_alias(pfn,vaddr)	do { } while (0)
+#endif
 
 static void __flush_dcache_page(struct address_space *mapping, struct page *page)
 {
@@ -36,6 +59,18 @@ static void __flush_dcache_page(struct address_space *mapping, struct page *page
 	if (!mapping)
 		return;
 
+	/*
+	 * This is a page cache page.  If we have a VIPT cache, we
+	 * only need to do one flush - which would be at the relevant
+	 * userspace colour, which is congruent with page->index.
+	 */
+	if (cache_is_vipt()) {
+		if (cache_is_vipt_aliasing())
+			flush_pfn_alias(page_to_pfn(page),
+					page->index << PAGE_CACHE_SHIFT);
+		return;
+	}
+
 	/*
 	 * There are possible user space mappings of this page:
 	 * - VIVT cache: we need to also write back and invalidate all user
@@ -57,8 +92,6 @@ static void __flush_dcache_page(struct address_space *mapping, struct page *page
 			continue;
 		offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
 		flush_cache_page(mpnt, mpnt->vm_start + offset, page_to_pfn(page));
-		if (cache_is_vipt())
-			break;
 	}
 	flush_dcache_mmap_unlock(mapping);
 }

arch/arm/mm/mm-armv.c

@@ -37,6 +37,8 @@ pgprot_t pgprot_kernel;
 
 EXPORT_SYMBOL(pgprot_kernel);
 
+pmd_t *top_pmd;
+
 struct cachepolicy {
 	const char	policy[16];
 	unsigned int	cr_mask;
@@ -142,6 +144,16 @@ __setup("noalign", noalign_setup);
 
 #define FIRST_KERNEL_PGD_NR	(FIRST_USER_PGD_NR + USER_PTRS_PER_PGD)
 
+static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
+{
+	return pmd_offset(pgd, virt);
+}
+
+static inline pmd_t *pmd_off_k(unsigned long virt)
+{
+	return pmd_off(pgd_offset_k(virt), virt);
+}
+
 /*
  * need to get a 16k page for level 1
  */
@@ -220,7 +232,7 @@ void free_pgd_slow(pgd_t *pgd)
 		return;
 
 	/* pgd is always present and good */
-	pmd = (pmd_t *)pgd;
+	pmd = pmd_off(pgd, 0);
 	if (pmd_none(*pmd))
 		goto free;
 	if (pmd_bad(*pmd)) {
@@ -246,9 +258,8 @@ free:
 static inline void
 alloc_init_section(unsigned long virt, unsigned long phys, int prot)
 {
-	pmd_t *pmdp;
+	pmd_t *pmdp = pmd_off_k(virt);
 
-	pmdp = pmd_offset(pgd_offset_k(virt), virt);
 	if (virt & (1 << 20))
 		pmdp++;
 
@@ -283,11 +294,9 @@ alloc_init_supersection(unsigned long virt, unsigned long phys, int prot)
 static inline void
 alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pgprot_t prot)
 {
-	pmd_t *pmdp;
+	pmd_t *pmdp = pmd_off_k(virt);
 	pte_t *ptep;
 
-	pmdp = pmd_offset(pgd_offset_k(virt), virt);
-
 	if (pmd_none(*pmdp)) {
 		unsigned long pmdval;
 		ptep = alloc_bootmem_low_pages(2 * PTRS_PER_PTE *
@@ -310,7 +319,7 @@ alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pg
  */
 static inline void clear_mapping(unsigned long virt)
 {
-	pmd_clear(pmd_offset(pgd_offset_k(virt), virt));
+	pmd_clear(pmd_off_k(virt));
 }
 
 struct mem_types {
@@ -578,7 +587,7 @@ void setup_mm_for_reboot(char mode)
 			 PMD_TYPE_SECT;
 		if (cpu_arch <= CPU_ARCH_ARMv5)
 			pmdval |= PMD_BIT4;
-		pmd = pmd_offset(pgd + i, i << PGDIR_SHIFT);
+		pmd = pmd_off(pgd, i << PGDIR_SHIFT);
 		pmd[0] = __pmd(pmdval);
 		pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
 		flush_pmd_entry(pmd);
@@ -675,6 +684,8 @@ void __init memtable_init(struct meminfo *mi)
 
 	flush_cache_all();
 	flush_tlb_all();
+
+	top_pmd = pmd_off_k(0xffff0000);
 }
 
 /*

arch/i386/kernel/acpi/boot.c

@@ -650,7 +650,7 @@ acpi_find_rsdp (void)
 	 */
 	rsdp_phys = acpi_scan_rsdp (0, 0x400);
 	if (!rsdp_phys)
-		rsdp_phys = acpi_scan_rsdp (0xE0000, 0xFFFFF);
+		rsdp_phys = acpi_scan_rsdp (0xE0000, 0x20000);
 
 	return rsdp_phys;
 }

arch/i386/kernel/cpu/amd.c

@@ -24,9 +24,6 @@ __asm__(".align 4\nvide: ret");
 
 static void __init init_amd(struct cpuinfo_x86 *c)
 {
-#ifdef CONFIG_X86_SMP
-	int cpu = c == &boot_cpu_data ? 0 : c - cpu_data;
-#endif
 	u32 l, h;
 	int mbytes = num_physpages >> (20-PAGE_SHIFT);
 	int r;
@@ -198,14 +195,19 @@ static void __init init_amd(struct cpuinfo_x86 *c)
 			c->x86_num_cores = 1;
 	}
 
-#ifdef CONFIG_X86_SMP
+#ifdef CONFIG_X86_HT
 	/*
 	 * On a AMD dual core setup the lower bits of the APIC id
 	 * distingush the cores.  Assumes number of cores is a power
 	 * of two.
 	 */
 	if (c->x86_num_cores > 1) {
-		cpu_core_id[cpu] = cpu >> hweight32(c->x86_num_cores - 1);
+		int cpu = smp_processor_id();
+		unsigned bits = 0;
+		while ((1 << bits) < c->x86_num_cores)
+			bits++;
+		cpu_core_id[cpu] = phys_proc_id[cpu] & ((1<<bits)-1);
+		phys_proc_id[cpu] >>= bits;
 		printk(KERN_INFO "CPU %d(%d) -> Core %d\n",
 		       cpu, c->x86_num_cores, cpu_core_id[cpu]);
 	}

arch/i386/kernel/cpu/common.c

@@ -243,6 +243,10 @@ static void __init early_cpu_detect(void)
 	}
 
 	early_intel_workaround(c);
+
+#ifdef CONFIG_X86_HT
+	phys_proc_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff;
+#endif
 }
 
 void __init generic_identify(struct cpuinfo_x86 * c)

arch/i386/kernel/smpboot.c

@@ -888,6 +888,7 @@ void *xquad_portio;
 
 cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned;
 cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
+EXPORT_SYMBOL(cpu_core_map);
 
 static void __init smp_boot_cpus(unsigned int max_cpus)
 {

arch/i386/mach-voyager/voyager_smp.c

@@ -97,7 +97,6 @@ static void ack_vic_irq(unsigned int irq);
 static void vic_enable_cpi(void);
 static void do_boot_cpu(__u8 cpuid);
 static void do_quad_bootstrap(void);
-static inline void wrapper_smp_local_timer_interrupt(struct pt_regs *);
 
 int hard_smp_processor_id(void);
 
@@ -125,6 +124,14 @@ send_QIC_CPI(__u32 cpuset, __u8 cpi)
 	}
 }
 
+static inline void
+wrapper_smp_local_timer_interrupt(struct pt_regs *regs)
+{
+	irq_enter();
+	smp_local_timer_interrupt(regs);
+	irq_exit();
+}
+
 static inline void
 send_one_CPI(__u8 cpu, __u8 cpi)
 {
@@ -1249,14 +1256,6 @@ smp_vic_timer_interrupt(struct pt_regs *regs)
 	smp_local_timer_interrupt(regs);
 }
 
-static inline void
-wrapper_smp_local_timer_interrupt(struct pt_regs *regs)
-{
-	irq_enter();
-	smp_local_timer_interrupt(regs);
-	irq_exit();
-}
-
 /* local (per CPU) timer interrupt.  It does both profiling and
  * process statistics/rescheduling.
  *

arch/i386/mm/ioremap.c

@@ -238,19 +238,21 @@ void iounmap(volatile void __iomem *addr)
 			addr < phys_to_virt(ISA_END_ADDRESS))
 		return;
 
-	p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
+	write_lock(&vmlist_lock);
+	p = __remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
 	if (!p) { 
-		printk("__iounmap: bad address %p\n", addr);
-		return;
+		printk("iounmap: bad address %p\n", addr);
+		goto out_unlock;
 	}
 
 	if ((p->flags >> 20) && p->phys_addr < virt_to_phys(high_memory) - 1) {
-		/* p->size includes the guard page, but cpa doesn't like that */
 		change_page_attr(virt_to_page(__va(p->phys_addr)),
 				 p->size >> PAGE_SHIFT,
 				 PAGE_KERNEL);
 		global_flush_tlb();
 	} 
+out_unlock:
+	write_unlock(&vmlist_lock);
 	kfree(p); 
 }
 

arch/i386/pci/fixup.c

@@ -253,7 +253,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci
 #define MAX_PCIEROOT	6
 static int quirk_aspm_offset[MAX_PCIEROOT << 3];
 
-#define GET_INDEX(a, b) (((a - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + b)
+#define GET_INDEX(a, b) ((((a) - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + ((b) & 7))
 
 static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
 {

arch/ia64/ia32/ia32_ioctl.c

@@ -13,7 +13,6 @@
   
 #define	INCLUDES
 #include "compat_ioctl.c"
-#include <asm/ioctl32.h>
 
 #define IOCTL_NR(a)	((a) & ~(_IOC_SIZEMASK << _IOC_SIZESHIFT))
 

arch/mips/vr41xx/common/pmu.c

@@ -1,7 +1,7 @@
 /*
  *  pmu.c, Power Management Unit routines for NEC VR4100 series.
  *
- *  Copyright (C) 2003-2004  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
+ *  Copyright (C) 2003-2005  Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -17,7 +17,9 @@
  *  along with this program; if not, write to the Free Software
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
+#include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/smp.h>
 #include <linux/types.h>
@@ -27,20 +29,31 @@
 #include <asm/reboot.h>
 #include <asm/system.h>
 
-#define PMUCNT2REG	KSEG1ADDR(0x0f0000c6)
+#define PMU_TYPE1_BASE	0x0b0000a0UL
+#define PMU_TYPE1_SIZE	0x0eUL
+
+#define PMU_TYPE2_BASE	0x0f0000c0UL
+#define PMU_TYPE2_SIZE	0x10UL
+
+#define PMUCNT2REG	0x06
  #define SOFTRST	0x0010
 
+static void __iomem *pmu_base;
+
+#define pmu_read(offset)		readw(pmu_base + (offset))
+#define pmu_write(offset, value)	writew((value), pmu_base + (offset))
+
 static inline void software_reset(void)
 {
-	uint16_t val;
+	uint16_t pmucnt2;
 
 	switch (current_cpu_data.cputype) {
 	case CPU_VR4122:
 	case CPU_VR4131:
 	case CPU_VR4133:
-		val = readw(PMUCNT2REG);
-		val |= SOFTRST;
-		writew(val, PMUCNT2REG);
+		pmucnt2 = pmu_read(PMUCNT2REG);
+		pmucnt2 |= SOFTRST;
+		pmu_write(PMUCNT2REG, pmucnt2);
 		break;
 	default:
 		break;
@@ -71,6 +84,34 @@ static void vr41xx_power_off(void)
 
 static int __init vr41xx_pmu_init(void)
 {
+	unsigned long start, size;
+
+	switch (current_cpu_data.cputype) {
+	case CPU_VR4111:
+	case CPU_VR4121:
+		start = PMU_TYPE1_BASE;
+		size = PMU_TYPE1_SIZE;
+		break;
+	case CPU_VR4122:
+	case CPU_VR4131:
+	case CPU_VR4133:
+		start = PMU_TYPE2_BASE;
+		size = PMU_TYPE2_SIZE;
+		break;
+	default:
+		printk("Unexpected CPU of NEC VR4100 series\n");
+		return -ENODEV;
+	}
+
+	if (request_mem_region(start, size, "PMU") == NULL)
+		return -EBUSY;
+
+	pmu_base = ioremap(start, size);
+	if (pmu_base == NULL) {
+		release_mem_region(start, size);
+		return -EBUSY;
+	}
+
 	_machine_restart = vr41xx_restart;
 	_machine_halt = vr41xx_halt;
 	_machine_power_off = vr41xx_power_off;
@@ -78,4 +119,4 @@ static int __init vr41xx_pmu_init(void)
 	return 0;
 }
 
-early_initcall(vr41xx_pmu_init);
+core_initcall(vr41xx_pmu_init);

arch/ppc/Kconfig

@@ -77,9 +77,11 @@ config 44x
 	bool "44x"
 
 config POWER3
+	select PPC_FPU
 	bool "POWER3"
 
 config POWER4
+	select PPC_FPU
 	bool "POWER4 and 970 (G5)"
 
 config 8xx

arch/ppc/kernel/head_44x.S

@@ -330,8 +330,9 @@ interrupt_base:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	andis.	r11, r10, 0x8000
-	beq	3f
+	lis	r11, TASK_SIZE@h
+	cmplw	r10, r11
+	blt+	3f
 	lis	r11, swapper_pg_dir@h
 	ori	r11, r11, swapper_pg_dir@l
 
@@ -464,8 +465,9 @@ interrupt_base:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	andis.	r11, r10, 0x8000
-	beq	3f
+	lis	r11, TASK_SIZE@h
+	cmplw	r10, r11
+	blt+	3f
 	lis	r11, swapper_pg_dir@h
 	ori	r11, r11, swapper_pg_dir@l
 
@@ -533,8 +535,9 @@ interrupt_base:
 	/* If we are faulting a kernel address, we have to use the
 	 * kernel page tables.
 	 */
-	andis.	r11, r10, 0x8000
-	beq	3f
+	lis	r11, TASK_SIZE@h
+	cmplw	r10, r11
+	blt+	3f
 	lis	r11, swapper_pg_dir@h
 	ori	r11, r11, swapper_pg_dir@l
 

arch/ppc/kernel/setup.c

@@ -499,7 +499,7 @@ static int __init set_preferred_console(void)
 {
 	struct device_node *prom_stdout;
 	char *name;
-	int offset;
+	int offset = 0;
 
 	if (of_stdout_device == NULL)
 		return -ENODEV;
@@ -753,6 +753,8 @@ void __init setup_arch(char **cmdline_p)
 	strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
 	*cmdline_p = cmd_line;
 
+	parse_early_param();
+
 	/* set up the bootmem stuff with available memory */
 	do_init_bootmem();
 	if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);

arch/ppc/lib/string.S

@@ -446,6 +446,7 @@ _GLOBAL(__copy_tofrom_user)
 #ifdef CONFIG_8xx
 	/* Don't use prefetch on 8xx */
 	mtctr	r0
+	li	r0,0
 53:	COPY_16_BYTES_WITHEX(0)
 	bdnz	53b
 
@@ -564,7 +565,9 @@ _GLOBAL(__copy_tofrom_user)
 /* or write fault in cacheline loop */
 105:	li	r9,1
 92:	li	r3,LG_CACHELINE_BYTES
-	b	99f
+	mfctr	r8
+	add	r0,r0,r8
+	b	106f
 /* read fault in final word loop */
 108:	li	r9,0
 	b	93f
@@ -585,7 +588,7 @@ _GLOBAL(__copy_tofrom_user)
  * r5 + (ctr << r3), and r9 is 0 for read or 1 for write.
  */
 99:	mfctr	r0
-	slw	r3,r0,r3
+106:	slw	r3,r0,r3
 	add.	r3,r3,r5
 	beq	120f			/* shouldn't happen */
 	cmpwi	0,r9,0

arch/ppc/mm/init.c

@@ -179,6 +179,7 @@ void free_initmem(void)
 	if (!have_of)
 		FREESEC(openfirmware);
  	printk("\n");
+	ppc_md.progress = NULL;
 #undef FREESEC
 }
 

arch/ppc/syslib/ipic.c

@@ -479,7 +479,7 @@ void __init ipic_init(phys_addr_t phys_addr,
 	temp = 0;
 	for (i = 0 ; i < senses_count ; i++) {
 		if ((senses[i] & IRQ_SENSE_MASK) == IRQ_SENSE_EDGE) {
-			temp |= 1 << (16 - i);
+			temp |= 1 << (15 - i);
 			if (i != 0)
 				irq_desc[i + irq_offset + MPC83xx_IRQ_EXT1 - 1].status = 0;
 			else

arch/ppc/syslib/mpc83xx_devices.c

@@ -61,6 +61,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.iotype		= UPIO_MEM,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 	},
+	{ },
 };
 
 struct platform_device ppc_sys_platform_devices[] = {

arch/ppc/syslib/mpc85xx_devices.c

@@ -61,6 +61,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.iotype		= UPIO_MEM,
 		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ,
 	},
+	{ },
 };
 
 struct platform_device ppc_sys_platform_devices[] = {

arch/ppc/syslib/open_pic.c

@@ -557,12 +557,10 @@ static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec)
  */
 void openpic_cause_IPI(u_int ipi, cpumask_t cpumask)
 {
-	cpumask_t phys;
 	DECL_THIS_CPU;
 
 	CHECK_THIS_CPU;
 	check_arg_ipi(ipi);
-	phys = physmask(cpumask);
 	openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi),
 		      cpus_addr(physmask(cpumask))[0]);
 }

arch/ppc64/Kconfig

@@ -262,6 +262,7 @@ config PPC_RTAS
 config RTAS_PROC
 	bool "Proc interface to RTAS"
 	depends on PPC_RTAS
+	default y
 
 config RTAS_FLASH
 	tristate "Firmware flash interface"

arch/ppc64/kernel/mf.c

@@ -1,7 +1,7 @@
 /*
   * mf.c
   * Copyright (C) 2001 Troy D. Armstrong  IBM Corporation
-  * Copyright (C) 2004 Stephen Rothwell  IBM Corporation
+  * Copyright (C) 2004-2005 Stephen Rothwell  IBM Corporation
   *
   * This modules exists as an interface between a Linux secondary partition
   * running on an iSeries and the primary partition's Virtual Service
@@ -36,10 +36,12 @@
 
 #include <asm/time.h>
 #include <asm/uaccess.h>
+#include <asm/paca.h>
 #include <asm/iSeries/vio.h>
 #include <asm/iSeries/mf.h>
 #include <asm/iSeries/HvLpConfig.h>
 #include <asm/iSeries/ItSpCommArea.h>
+#include <asm/iSeries/ItLpQueue.h>
 
 /*
  * This is the structure layout for the Machine Facilites LPAR event
@@ -696,36 +698,23 @@ static void get_rtc_time_complete(void *token, struct ce_msg_data *ce_msg)
 	complete(&rtc->com);
 }
 
-int mf_get_rtc(struct rtc_time *tm)
+static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm)
 {
-	struct ce_msg_comp_data ce_complete;
-	struct rtc_time_data rtc_data;
-	int rc;
-
-	memset(&ce_complete, 0, sizeof(ce_complete));
-	memset(&rtc_data, 0, sizeof(rtc_data));
-	init_completion(&rtc_data.com);
-	ce_complete.handler = &get_rtc_time_complete;
-	ce_complete.token = &rtc_data;
-	rc = signal_ce_msg_simple(0x40, &ce_complete);
-	if (rc)
-		return rc;
-	wait_for_completion(&rtc_data.com);
 	tm->tm_wday = 0;
 	tm->tm_yday = 0;
 	tm->tm_isdst = 0;
-	if (rtc_data.rc) {
+	if (rc) {
 		tm->tm_sec = 0;
 		tm->tm_min = 0;
 		tm->tm_hour = 0;
 		tm->tm_mday = 15;
 		tm->tm_mon = 5;
 		tm->tm_year = 52;
-		return rtc_data.rc;
+		return rc;
 	}
 
-	if ((rtc_data.ce_msg.ce_msg[2] == 0xa9) ||
-	    (rtc_data.ce_msg.ce_msg[2] == 0xaf)) {
+	if ((ce_msg[2] == 0xa9) ||
+	    (ce_msg[2] == 0xaf)) {
 		/* TOD clock is not set */
 		tm->tm_sec = 1;
 		tm->tm_min = 1;
@@ -736,7 +725,6 @@ int mf_get_rtc(struct rtc_time *tm)
 		mf_set_rtc(tm);
 	}
 	{
-		u8 *ce_msg = rtc_data.ce_msg.ce_msg;
 		u8 year = ce_msg[5];
 		u8 sec = ce_msg[6];
 		u8 min = ce_msg[7];
@@ -765,6 +753,63 @@ int mf_get_rtc(struct rtc_time *tm)
 	return 0;
 }
 
+int mf_get_rtc(struct rtc_time *tm)
+{
+	struct ce_msg_comp_data ce_complete;
+	struct rtc_time_data rtc_data;
+	int rc;
+
+	memset(&ce_complete, 0, sizeof(ce_complete));
+	memset(&rtc_data, 0, sizeof(rtc_data));
+	init_completion(&rtc_data.com);
+	ce_complete.handler = &get_rtc_time_complete;
+	ce_complete.token = &rtc_data;
+	rc = signal_ce_msg_simple(0x40, &ce_complete);
+	if (rc)
+		return rc;
+	wait_for_completion(&rtc_data.com);
+	return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm);
+}
+
+struct boot_rtc_time_data {
+	int busy;
+	struct ce_msg_data ce_msg;
+	int rc;
+};
+
+static void get_boot_rtc_time_complete(void *token, struct ce_msg_data *ce_msg)
+{
+	struct boot_rtc_time_data *rtc = token;
+
+	memcpy(&rtc->ce_msg, ce_msg, sizeof(rtc->ce_msg));
+	rtc->rc = 0;
+	rtc->busy = 0;
+}
+
+int mf_get_boot_rtc(struct rtc_time *tm)
+{
+	struct ce_msg_comp_data ce_complete;
+	struct boot_rtc_time_data rtc_data;
+	int rc;
+
+	memset(&ce_complete, 0, sizeof(ce_complete));
+	memset(&rtc_data, 0, sizeof(rtc_data));
+	rtc_data.busy = 1;
+	ce_complete.handler = &get_boot_rtc_time_complete;
+	ce_complete.token = &rtc_data;
+	rc = signal_ce_msg_simple(0x40, &ce_complete);
+	if (rc)
+		return rc;
+	/* We need to poll here as we are not yet taking interrupts */
+	while (rtc_data.busy) {
+		extern unsigned long lpevent_count;
+		struct ItLpQueue *lpq = get_paca()->lpqueue_ptr;
+		if (lpq && ItLpQueue_isLpIntPending(lpq))
+			lpevent_count += ItLpQueue_process(lpq, NULL);
+	}
+	return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm);
+}
+
 int mf_set_rtc(struct rtc_time *tm)
 {
 	char ce_time[12];

arch/ppc64/kernel/pSeries_smp.c

@@ -326,13 +326,6 @@ static void __devinit smp_xics_setup_cpu(int cpu)
 
 	cpu_clear(cpu, of_spin_map);
 
-	/*
-	 * Put the calling processor into the GIQ.  This is really only
-	 * necessary from a secondary thread as the OF start-cpu interface
-	 * performs this function for us on primary threads.
-	 */
-	rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
-		(1UL << interrupt_server_size) - 1 - default_distrib_server, 1);
 }
 
 static DEFINE_SPINLOCK(timebase_lock);

arch/ppc64/kernel/pmac_smp.c

@@ -68,6 +68,7 @@ extern struct smp_ops_t *smp_ops;
 
 static void (*pmac_tb_freeze)(int freeze);
 static struct device_node *pmac_tb_clock_chip_host;
+static u8 pmac_tb_pulsar_addr;
 static DEFINE_SPINLOCK(timebase_lock);
 static unsigned long timebase;
 
@@ -106,12 +107,9 @@ static void smp_core99_pulsar_tb_freeze(int freeze)
 	u8 data;
 	int rc;
 
-	/* Strangely, the device-tree says address is 0xd2, but darwin
-	 * accesses 0xd0 ...
-	 */
 	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_combined);
 	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
-			       0xd4 | pmac_low_i2c_read,
+			       pmac_tb_pulsar_addr | pmac_low_i2c_read,
 			       0x2e, &data, 1);
 	if (rc != 0)
 		goto bail;
@@ -120,7 +118,7 @@ static void smp_core99_pulsar_tb_freeze(int freeze)
 
 	pmac_low_i2c_setmode(pmac_tb_clock_chip_host, pmac_low_i2c_mode_stdsub);
 	rc = pmac_low_i2c_xfer(pmac_tb_clock_chip_host,
-			       0xd4 | pmac_low_i2c_write,
+			       pmac_tb_pulsar_addr | pmac_low_i2c_write,
 			       0x2e, &data, 1);
  bail:
 	if (rc != 0) {
@@ -185,6 +183,12 @@ static int __init smp_core99_probe(void)
 	if (ncpus <= 1)
 		return 1;
 
+	/* HW sync only on these platforms */
+	if (!machine_is_compatible("PowerMac7,2") &&
+	    !machine_is_compatible("PowerMac7,3") &&
+	    !machine_is_compatible("RackMac3,1"))
+		goto nohwsync;
+
 	/* Look for the clock chip */
 	for (cc = NULL; (cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL;) {
 		struct device_node *p = of_get_parent(cc);
@@ -198,11 +202,18 @@ static int __init smp_core99_probe(void)
 			goto next;
 		switch (*reg) {
 		case 0xd2:
-			pmac_tb_freeze = smp_core99_cypress_tb_freeze;
-			printk(KERN_INFO "Timebase clock is Cypress chip\n");
+			if (device_is_compatible(cc, "pulsar-legacy-slewing")) {
+				pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
+				pmac_tb_pulsar_addr = 0xd2;
+				printk(KERN_INFO "Timebase clock is Pulsar chip\n");
+			} else if (device_is_compatible(cc, "cy28508")) {
+				pmac_tb_freeze = smp_core99_cypress_tb_freeze;
+				printk(KERN_INFO "Timebase clock is Cypress chip\n");
+			}
 			break;
 		case 0xd4:
 			pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
+			pmac_tb_pulsar_addr = 0xd4;
 			printk(KERN_INFO "Timebase clock is Pulsar chip\n");
 			break;
 		}
@@ -210,12 +221,15 @@ static int __init smp_core99_probe(void)
 			pmac_tb_clock_chip_host = p;
 			smp_ops->give_timebase = smp_core99_give_timebase;
 			smp_ops->take_timebase = smp_core99_take_timebase;
+			of_node_put(cc);
+			of_node_put(p);
 			break;
 		}
 	next:
 		of_node_put(p);
 	}
 
+ nohwsync:
 	mpic_request_ipis();
 
 	return ncpus;

arch/ppc64/kernel/prom_init.c

@@ -1750,7 +1750,44 @@ static void __init flatten_device_tree(void)
 	prom_printf("Device tree struct  0x%x -> 0x%x\n",
 		    RELOC(dt_struct_start), RELOC(dt_struct_end));
 
- }
+}
+
+
+static void __init fixup_device_tree(void)
+{
+	unsigned long offset = reloc_offset();
+	phandle u3, i2c, mpic;
+	u32 u3_rev;
+	u32 interrupts[2];
+	u32 parent;
+
+	/* Some G5s have a missing interrupt definition, fix it up here */
+	u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000"));
+	if ((long)u3 <= 0)
+		return;
+	i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000"));
+	if ((long)i2c <= 0)
+		return;
+	mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000"));
+	if ((long)mpic <= 0)
+		return;
+
+	/* check if proper rev of u3 */
+	if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) <= 0)
+		return;
+	if (u3_rev != 0x35)
+		return;
+	/* does it need fixup ? */
+	if (prom_getproplen(i2c, "interrupts") > 0)
+		return;
+	/* interrupt on this revision of u3 is number 0 and level */
+	interrupts[0] = 0;
+	interrupts[1] = 1;
+	prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts));
+	parent = (u32)mpic;
+	prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent));
+}
+
 
 static void __init prom_find_boot_cpu(void)
 {
@@ -1919,6 +1956,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long
 			PTRRELOC(&prom_tce_alloc_end), sizeof(RELOC(prom_tce_alloc_end)));
 	}
 
+	/*
+	 * Fixup any known bugs in the device-tree
+	 */
+	fixup_device_tree();
+
 	/*
 	 * Now finally create the flattened device-tree
 	 */

arch/ppc64/kernel/rtc.c

@@ -292,47 +292,10 @@ int iSeries_set_rtc_time(struct rtc_time *tm)
 
 void iSeries_get_boot_time(struct rtc_time *tm)
 {
-	unsigned long time;
-	static unsigned long lastsec = 1;
-
-	u32 dataWord1 = *((u32 *)(&xSpCommArea.xBcdTimeAtIplStart));
-	u32 dataWord2 = *(((u32 *)&(xSpCommArea.xBcdTimeAtIplStart)) + 1);
-	int year = 1970;
-	int year1 = ( dataWord1 >> 24 ) & 0x000000FF;
-	int year2 = ( dataWord1 >> 16 ) & 0x000000FF;
-	int sec = ( dataWord1 >> 8 ) & 0x000000FF;
-	int min = dataWord1 & 0x000000FF;
-	int hour = ( dataWord2 >> 24 ) & 0x000000FF;
-	int day = ( dataWord2 >> 8 ) & 0x000000FF;
-	int mon = dataWord2 & 0x000000FF;
-
 	if ( piranha_simulator )
 		return;
 
-	BCD_TO_BIN(sec);
-	BCD_TO_BIN(min);
-	BCD_TO_BIN(hour);
-	BCD_TO_BIN(day);
-	BCD_TO_BIN(mon);
-	BCD_TO_BIN(year1);
-	BCD_TO_BIN(year2);
-	year = year1 * 100 + year2;
-
-	time = mktime(year, mon, day, hour, min, sec);
-	time += ( jiffies / HZ );
-
-	/* Now THIS is a nasty hack!
-	* It ensures that the first two calls get different answers.  
-	* That way the loop in init_time (time.c) will not think
-	* the clock is stuck.
-	*/
-	if ( lastsec ) {
-		time -= lastsec;
-		--lastsec;
-	}
-
-	to_tm(time, tm); 
-	tm->tm_year -= 1900;
+	mf_get_boot_rtc(tm);
 	tm->tm_mon  -= 1;
 }
 #endif

arch/ppc64/kernel/time.c

@@ -515,6 +515,7 @@ void __init time_init(void)
 	do_gtod.varp = &do_gtod.vars[0];
 	do_gtod.var_idx = 0;
 	do_gtod.varp->tb_orig_stamp = tb_last_stamp;
+	get_paca()->next_jiffy_update_tb = tb_last_stamp + tb_ticks_per_jiffy;
 	do_gtod.varp->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC;
 	do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
 	do_gtod.varp->tb_to_xs = tb_to_xs;

arch/ppc64/kernel/xics.c

@@ -432,6 +432,7 @@ void xics_cause_IPI(int cpu)
 {
 	ops->qirr_info(cpu, IPI_PRIORITY);
 }
+#endif /* CONFIG_SMP */
 
 void xics_setup_cpu(void)
 {
@@ -439,9 +440,17 @@ void xics_setup_cpu(void)
 
 	ops->cppr_info(cpu, 0xff);
 	iosync();
-}
 
-#endif /* CONFIG_SMP */
+	/*
+	 * Put the calling processor into the GIQ.  This is really only
+	 * necessary from a secondary thread as the OF start-cpu interface
+	 * performs this function for us on primary threads.
+	 *
+	 * XXX: undo of teardown on kexec needs this too, as may hotplug
+	 */
+	rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE,
+		(1UL << interrupt_server_size) - 1 - default_distrib_server, 1);
+}
 
 void xics_init_IRQ(void)
 {
@@ -563,8 +572,7 @@ nextnode:
 	for (; i < NR_IRQS; ++i)
 		get_irq_desc(i)->handler = &xics_pic;
 
-	ops->cppr_info(boot_cpuid, 0xff);
-	iosync();
+	xics_setup_cpu();
 
 	ppc64_boot_msg(0x21, "XICS Done");
 }

arch/sparc64/kernel/pci_iommu.c

@@ -8,6 +8,7 @@
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
+#include <linux/delay.h>
 
 #include <asm/pbm.h>
 
@@ -379,6 +380,56 @@ bad:
 	return PCI_DMA_ERROR_CODE;
 }
 
+static void pci_strbuf_flush(struct pci_strbuf *strbuf, struct pci_iommu *iommu, u32 vaddr, unsigned long ctx, unsigned long npages)
+{
+	int limit;
+
+	PCI_STC_FLUSHFLAG_INIT(strbuf);
+	if (strbuf->strbuf_ctxflush &&
+	    iommu->iommu_ctxflush) {
+		unsigned long matchreg, flushreg;
+
+		flushreg = strbuf->strbuf_ctxflush;
+		matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
+
+		limit = 100000;
+		pci_iommu_write(flushreg, ctx);
+		for(;;) {
+			if (((long)pci_iommu_read(matchreg)) >= 0L)
+				break;
+			limit--;
+			if (!limit)
+				break;
+			udelay(1);
+		}
+		if (!limit)
+			printk(KERN_WARNING "pci_strbuf_flush: ctx flush "
+			       "timeout vaddr[%08x] ctx[%lx]\n",
+			       vaddr, ctx);
+	} else {
+		unsigned long i;
+
+		for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE)
+			pci_iommu_write(strbuf->strbuf_pflush, vaddr);
+	}
+
+	pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
+	(void) pci_iommu_read(iommu->write_complete_reg);
+
+	limit = 100000;
+	while (!PCI_STC_FLUSHFLAG_SET(strbuf)) {
+		limit--;
+		if (!limit)
+			break;
+		udelay(1);
+		membar("#LoadLoad");
+	}
+	if (!limit)
+		printk(KERN_WARNING "pci_strbuf_flush: flushflag timeout "
+		       "vaddr[%08x] ctx[%lx] npages[%ld]\n",
+		       vaddr, ctx, npages);
+}
+
 /* Unmap a single streaming mode DMA translation. */
 void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int direction)
 {
@@ -386,7 +437,7 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int
 	struct pci_iommu *iommu;
 	struct pci_strbuf *strbuf;
 	iopte_t *base;
-	unsigned long flags, npages, i, ctx;
+	unsigned long flags, npages, ctx;
 
 	if (direction == PCI_DMA_NONE)
 		BUG();
@@ -414,29 +465,8 @@ void pci_unmap_single(struct pci_dev *pdev, dma_addr_t bus_addr, size_t sz, int
 		ctx = (iopte_val(*base) & IOPTE_CONTEXT) >> 47UL;
 
 	/* Step 1: Kick data out of streaming buffers if necessary. */
-	if (strbuf->strbuf_enabled) {
-		u32 vaddr = bus_addr;
-
-		PCI_STC_FLUSHFLAG_INIT(strbuf);
-		if (strbuf->strbuf_ctxflush &&
-		    iommu->iommu_ctxflush) {
-			unsigned long matchreg, flushreg;
-
-			flushreg = strbuf->strbuf_ctxflush;
-			matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
-			do {
-				pci_iommu_write(flushreg, ctx);
-			} while(((long)pci_iommu_read(matchreg)) < 0L);
-		} else {
-			for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE)
-				pci_iommu_write(strbuf->strbuf_pflush, vaddr);
-		}
-
-		pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
-		(void) pci_iommu_read(iommu->write_complete_reg);
-		while (!PCI_STC_FLUSHFLAG_SET(strbuf))
-			membar("#LoadLoad");
-	}
+	if (strbuf->strbuf_enabled)
+		pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages);
 
 	/* Step 2: Clear out first TSB entry. */
 	iopte_make_dummy(iommu, base);
@@ -647,29 +677,8 @@ void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sglist, int nelems,
 		ctx = (iopte_val(*base) & IOPTE_CONTEXT) >> 47UL;
 
 	/* Step 1: Kick data out of streaming buffers if necessary. */
-	if (strbuf->strbuf_enabled) {
-		u32 vaddr = (u32) bus_addr;
-
-		PCI_STC_FLUSHFLAG_INIT(strbuf);
-		if (strbuf->strbuf_ctxflush &&
-		    iommu->iommu_ctxflush) {
-			unsigned long matchreg, flushreg;
-
-			flushreg = strbuf->strbuf_ctxflush;
-			matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
-			do {
-				pci_iommu_write(flushreg, ctx);
-			} while(((long)pci_iommu_read(matchreg)) < 0L);
-		} else {
-			for (i = 0; i < npages; i++, vaddr += IO_PAGE_SIZE)
-				pci_iommu_write(strbuf->strbuf_pflush, vaddr);
-		}
-
-		pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
-		(void) pci_iommu_read(iommu->write_complete_reg);
-		while (!PCI_STC_FLUSHFLAG_SET(strbuf))
-			membar("#LoadLoad");
-	}
+	if (strbuf->strbuf_enabled)
+		pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages);
 
 	/* Step 2: Clear out first TSB entry. */
 	iopte_make_dummy(iommu, base);
@@ -715,28 +724,7 @@ void pci_dma_sync_single_for_cpu(struct pci_dev *pdev, dma_addr_t bus_addr, size
 	}
 
 	/* Step 2: Kick data out of streaming buffers. */
-	PCI_STC_FLUSHFLAG_INIT(strbuf);
-	if (iommu->iommu_ctxflush &&
-	    strbuf->strbuf_ctxflush) {
-		unsigned long matchreg, flushreg;
-
-		flushreg = strbuf->strbuf_ctxflush;
-		matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
-		do {
-			pci_iommu_write(flushreg, ctx);
-		} while(((long)pci_iommu_read(matchreg)) < 0L);
-	} else {
-		unsigned long i;
-
-		for (i = 0; i < npages; i++, bus_addr += IO_PAGE_SIZE)
-			pci_iommu_write(strbuf->strbuf_pflush, bus_addr);
-	}
-
-	/* Step 3: Perform flush synchronization sequence. */
-	pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
-	(void) pci_iommu_read(iommu->write_complete_reg);
-	while (!PCI_STC_FLUSHFLAG_SET(strbuf))
-		membar("#LoadLoad");
+	pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages);
 
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
@@ -749,7 +737,8 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, i
 	struct pcidev_cookie *pcp;
 	struct pci_iommu *iommu;
 	struct pci_strbuf *strbuf;
-	unsigned long flags, ctx;
+	unsigned long flags, ctx, npages, i;
+	u32 bus_addr;
 
 	pcp = pdev->sysdata;
 	iommu = pcp->pbm->iommu;
@@ -772,36 +761,14 @@ void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev, struct scatterlist *sglist, i
 	}
 
 	/* Step 2: Kick data out of streaming buffers. */
-	PCI_STC_FLUSHFLAG_INIT(strbuf);
-	if (iommu->iommu_ctxflush &&
-	    strbuf->strbuf_ctxflush) {
-		unsigned long matchreg, flushreg;
-
-		flushreg = strbuf->strbuf_ctxflush;
-		matchreg = PCI_STC_CTXMATCH_ADDR(strbuf, ctx);
-		do {
-			pci_iommu_write(flushreg, ctx);
-		} while (((long)pci_iommu_read(matchreg)) < 0L);
-	} else {
-		unsigned long i, npages;
-		u32 bus_addr;
-
-		bus_addr = sglist[0].dma_address & IO_PAGE_MASK;
-
-		for(i = 1; i < nelems; i++)
-			if (!sglist[i].dma_length)
-				break;
-		i--;
-		npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length) - bus_addr) >> IO_PAGE_SHIFT;
-		for (i = 0; i < npages; i++, bus_addr += IO_PAGE_SIZE)
-			pci_iommu_write(strbuf->strbuf_pflush, bus_addr);
-	}
-
-	/* Step 3: Perform flush synchronization sequence. */
-	pci_iommu_write(strbuf->strbuf_fsync, strbuf->strbuf_flushflag_pa);
-	(void) pci_iommu_read(iommu->write_complete_reg);
-	while (!PCI_STC_FLUSHFLAG_SET(strbuf))
-		membar("#LoadLoad");
+	bus_addr = sglist[0].dma_address & IO_PAGE_MASK;
+	for(i = 1; i < nelems; i++)
+		if (!sglist[i].dma_length)
+			break;
+	i--;
+	npages = (IO_PAGE_ALIGN(sglist[i].dma_address + sglist[i].dma_length)
+		  - bus_addr) >> IO_PAGE_SHIFT;
+	pci_strbuf_flush(strbuf, iommu, bus_addr, ctx, npages);
 
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }

arch/sparc64/kernel/sbus.c

@@ -117,19 +117,34 @@ static void iommu_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages
 
 #define STRBUF_TAG_VALID	0x02UL
 
-static void strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages)
+static void sbus_strbuf_flush(struct sbus_iommu *iommu, u32 base, unsigned long npages)
 {
+	unsigned long n;
+	int limit;
+
 	iommu->strbuf_flushflag = 0UL;
-	while (npages--)
-		upa_writeq(base + (npages << IO_PAGE_SHIFT),
+	n = npages;
+	while (n--)
+		upa_writeq(base + (n << IO_PAGE_SHIFT),
 			   iommu->strbuf_regs + STRBUF_PFLUSH);
 
 	/* Whoopee cushion! */
 	upa_writeq(__pa(&iommu->strbuf_flushflag),
 		   iommu->strbuf_regs + STRBUF_FSYNC);
 	upa_readq(iommu->sbus_control_reg);
-	while (iommu->strbuf_flushflag == 0UL)
+
+	limit = 100000;
+	while (iommu->strbuf_flushflag == 0UL) {
+		limit--;
+		if (!limit)
+			break;
+		udelay(1);
 		membar("#LoadLoad");
+	}
+	if (!limit)
+		printk(KERN_WARNING "sbus_strbuf_flush: flushflag timeout "
+		       "vaddr[%08x] npages[%ld]\n",
+		       base, npages);
 }
 
 static iopte_t *alloc_streaming_cluster(struct sbus_iommu *iommu, unsigned long npages)
@@ -406,7 +421,7 @@ void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t dma_addr, size_t size,
 
 	spin_lock_irqsave(&iommu->lock, flags);
 	free_streaming_cluster(iommu, dma_base, size >> IO_PAGE_SHIFT);
-	strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT);
+	sbus_strbuf_flush(iommu, dma_base, size >> IO_PAGE_SHIFT);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
@@ -569,7 +584,7 @@ void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int nents, int
 	iommu = sdev->bus->iommu;
 	spin_lock_irqsave(&iommu->lock, flags);
 	free_streaming_cluster(iommu, dvma_base, size >> IO_PAGE_SHIFT);
-	strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT);
+	sbus_strbuf_flush(iommu, dvma_base, size >> IO_PAGE_SHIFT);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
@@ -581,7 +596,7 @@ void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t base, size_t
 	size = (IO_PAGE_ALIGN(base + size) - (base & IO_PAGE_MASK));
 
 	spin_lock_irqsave(&iommu->lock, flags);
-	strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT);
+	sbus_strbuf_flush(iommu, base & IO_PAGE_MASK, size >> IO_PAGE_SHIFT);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
@@ -605,7 +620,7 @@ void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int
 	size = IO_PAGE_ALIGN(sg[i].dma_address + sg[i].dma_length) - base;
 
 	spin_lock_irqsave(&iommu->lock, flags);
-	strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT);
+	sbus_strbuf_flush(iommu, base, size >> IO_PAGE_SHIFT);
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 

arch/sparc64/kernel/setup.c

@@ -383,6 +383,17 @@ static void __init process_switch(char c)
 		/* Use PROM debug console. */
 		register_console(&prom_debug_console);
 		break;
+	case 'P':
+		/* Force UltraSPARC-III P-Cache on. */
+		if (tlb_type != cheetah) {
+			printk("BOOT: Ignoring P-Cache force option.\n");
+			break;
+		}
+		cheetah_pcache_forced_on = 1;
+		add_taint(TAINT_MACHINE_CHECK);
+		cheetah_enable_pcache();
+		break;
+
 	default:
 		printk("Unknown boot switch (-%c)\n", c);
 		break;

arch/sparc64/kernel/smp.c

@@ -123,6 +123,9 @@ void __init smp_callin(void)
 
 	smp_setup_percpu_timer();
 
+	if (cheetah_pcache_forced_on)
+		cheetah_enable_pcache();
+
 	local_irq_enable();
 
 	calibrate_delay();

arch/sparc64/kernel/traps.c

@@ -421,6 +421,25 @@ asmlinkage void cee_log(unsigned long ce_status,
 	}
 }
 
+int cheetah_pcache_forced_on;
+
+void cheetah_enable_pcache(void)
+{
+	unsigned long dcr;
+
+	printk("CHEETAH: Enabling P-Cache on cpu %d.\n",
+	       smp_processor_id());
+
+	__asm__ __volatile__("ldxa [%%g0] %1, %0"
+			     : "=r" (dcr)
+			     : "i" (ASI_DCU_CONTROL_REG));
+	dcr |= (DCU_PE | DCU_HPE | DCU_SPE | DCU_SL);
+	__asm__ __volatile__("stxa %0, [%%g0] %1\n\t"
+			     "membar #Sync"
+			     : /* no outputs */
+			     : "r" (dcr), "i" (ASI_DCU_CONTROL_REG));
+}
+
 /* Cheetah error trap handling. */
 static unsigned long ecache_flush_physbase;
 static unsigned long ecache_flush_linesize;

arch/um/Kconfig_x86_64

@@ -6,6 +6,10 @@ config 64BIT
 	bool
 	default y
 
+config TOP_ADDR
+ 	hex
+	default 0x80000000
+
 config 3_LEVEL_PGTABLES
        bool
        default y

arch/um/drivers/chan_kern.c

@@ -20,9 +20,17 @@
 #include "os.h"
 
 #ifdef CONFIG_NOCONFIG_CHAN
+
+/* The printk's here are wrong because we are complaining that there is no
+ * output device, but printk is printing to that output device.  The user will
+ * never see the error.  printf would be better, except it can't run on a
+ * kernel stack because it will overflow it.
+ * Use printk for now since that will avoid crashing.
+ */
+
 static void *not_configged_init(char *str, int device, struct chan_opts *opts)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return(NULL);
 }
@@ -30,27 +38,27 @@ static void *not_configged_init(char *str, int device, struct chan_opts *opts)
 static int not_configged_open(int input, int output, int primary, void *data,
 			      char **dev_out)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return(-ENODEV);
 }
 
 static void not_configged_close(int fd, void *data)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 }
 
 static int not_configged_read(int fd, char *c_out, void *data)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return(-EIO);
 }
 
 static int not_configged_write(int fd, const char *buf, int len, void *data)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return(-EIO);
 }
@@ -58,7 +66,7 @@ static int not_configged_write(int fd, const char *buf, int len, void *data)
 static int not_configged_console_write(int fd, const char *buf, int len,
 				       void *data)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return(-EIO);
 }
@@ -66,7 +74,7 @@ static int not_configged_console_write(int fd, const char *buf, int len,
 static int not_configged_window_size(int fd, void *data, unsigned short *rows,
 				     unsigned short *cols)
 {
-	printf(KERN_ERR "Using a channel type which is configured out of "
+	printk(KERN_ERR "Using a channel type which is configured out of "
 	       "UML\n");
 	return(-ENODEV);
 }

arch/um/drivers/mcast_kern.c

@@ -73,7 +73,6 @@ int mcast_setup(char *str, char **mac_out, void *data)
 	struct mcast_init *init = data;
 	char *port_str = NULL, *ttl_str = NULL, *remain;
 	char *last;
-	int n;
 
 	*init = ((struct mcast_init)
 		{ .addr 	= "239.192.168.1",
@@ -89,13 +88,12 @@ int mcast_setup(char *str, char **mac_out, void *data)
 	}
 	
 	if(port_str != NULL){
-		n = simple_strtoul(port_str, &last, 10);
+		init->port = simple_strtoul(port_str, &last, 10);
 		if((*last != '\0') || (last == port_str)){
 			printk(KERN_ERR "mcast_setup - Bad port : '%s'\n", 
 			       port_str);
 			return(0);
 		}
-		init->port = htons(n);
 	}
 
 	if(ttl_str != NULL){

arch/um/drivers/mcast_user.c

@@ -38,7 +38,7 @@ static struct sockaddr_in *new_addr(char *addr, unsigned short port)
 	}
 	sin->sin_family = AF_INET;
 	sin->sin_addr.s_addr = in_aton(addr);
-	sin->sin_port = port;
+	sin->sin_port = htons(port);
 	return(sin);
 }
 
@@ -55,28 +55,25 @@ static int mcast_open(void *data)
 	struct mcast_data *pri = data;
 	struct sockaddr_in *sin = pri->mcast_addr;
 	struct ip_mreq mreq;
-	int fd, yes = 1;
+	int fd = -EINVAL, yes = 1, err = -EINVAL;;
 
 
-	if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0)) {
-		fd = -EINVAL;
+	if ((sin->sin_addr.s_addr == 0) || (sin->sin_port == 0))
 		goto out;
-	}
 
 	fd = socket(AF_INET, SOCK_DGRAM, 0);
+
 	if (fd < 0){
 		printk("mcast_open : data socket failed, errno = %d\n", 
 		       errno);
-		fd = -ENOMEM;
+		fd = -errno;
 		goto out;
 	}
 
 	if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &yes, sizeof(yes)) < 0) {
 		printk("mcast_open: SO_REUSEADDR failed, errno = %d\n",
 			errno);
-		os_close_file(fd);
-		fd = -EINVAL;
-		goto out;
+		goto out_close;
 	}
 
 	/* set ttl according to config */
@@ -84,26 +81,20 @@ static int mcast_open(void *data)
 		       sizeof(pri->ttl)) < 0) {
 		printk("mcast_open: IP_MULTICAST_TTL failed, error = %d\n",
 			errno);
-		os_close_file(fd);
-		fd = -EINVAL;
-		goto out;
+		goto out_close;
 	}
 
 	/* set LOOP, so data does get fed back to local sockets */
 	if (setsockopt(fd, SOL_IP, IP_MULTICAST_LOOP, &yes, sizeof(yes)) < 0) {
 		printk("mcast_open: IP_MULTICAST_LOOP failed, error = %d\n",
 			errno);
-		os_close_file(fd);
-		fd = -EINVAL;
-		goto out;
+		goto out_close;
 	}
 
 	/* bind socket to mcast address */
 	if (bind(fd, (struct sockaddr *) sin, sizeof(*sin)) < 0) {
 		printk("mcast_open : data bind failed, errno = %d\n", errno);
-		os_close_file(fd);
-		fd = -EINVAL;
-		goto out;
+		goto out_close;
 	}		
 	
 	/* subscribe to the multicast group */
@@ -117,12 +108,15 @@ static int mcast_open(void *data)
 		       "interface on the host.\n");
 		printk("eth0 should be configured in order to use the "
 		       "multicast transport.\n");
-		os_close_file(fd);
-		fd = -EINVAL;
+                goto out_close;
 	}
 
  out:
-	return(fd);
+	return fd;
+
+ out_close:
+        os_close_file(fd);
+        return err;
 }
 
 static void mcast_close(int fd, void *data)
@@ -164,14 +158,3 @@ struct net_user_info mcast_user_info = {
 	.delete_address = NULL,
 	.max_packet	= MAX_PACKET - ETH_HEADER_OTHER
 };
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */

arch/um/drivers/ubd_kern.c

@@ -55,7 +55,7 @@
 #include "mem_kern.h"
 #include "cow.h"
 
-enum ubd_req { UBD_READ, UBD_WRITE, UBD_MMAP };
+enum ubd_req { UBD_READ, UBD_WRITE };
 
 struct io_thread_req {
 	enum ubd_req op;
@@ -68,8 +68,6 @@ struct io_thread_req {
 	unsigned long sector_mask;
 	unsigned long long cow_offset;
 	unsigned long bitmap_words[2];
-	int map_fd;
-	unsigned long long map_offset;
 	int error;
 };
 
@@ -122,10 +120,6 @@ static int ubd_ioctl(struct inode * inode, struct file * file,
 
 #define MAX_DEV (8)
 
-/* Changed in early boot */
-static int ubd_do_mmap = 0;
-#define UBD_MMAP_BLOCK_SIZE PAGE_SIZE
-
 static struct block_device_operations ubd_blops = {
         .owner		= THIS_MODULE,
         .open		= ubd_open,
@@ -175,12 +169,6 @@ struct ubd {
 	int no_cow;
 	struct cow cow;
 	struct platform_device pdev;
-
-	int map_writes;
-	int map_reads;
-	int nomap_writes;
-	int nomap_reads;
-	int write_maps;
 };
 
 #define DEFAULT_COW { \
@@ -200,11 +188,6 @@ struct ubd {
 	.openflags =		OPEN_FLAGS, \
         .no_cow =               0, \
         .cow =			DEFAULT_COW, \
-	.map_writes		= 0, \
-	.map_reads		= 0, \
-	.nomap_writes		= 0, \
-	.nomap_reads		= 0, \
-	.write_maps		= 0, \
 }
 
 struct ubd ubd_dev[MAX_DEV] = { [ 0 ... MAX_DEV - 1 ] = DEFAULT_UBD };
@@ -314,13 +297,6 @@ static int ubd_setup_common(char *str, int *index_out)
 		int major;
 
 		str++;
-		if(!strcmp(str, "mmap")){
-			CHOOSE_MODE(printk("mmap not supported by the ubd "
-					   "driver in tt mode\n"),
-				    ubd_do_mmap = 1);
-			return(0);
-		}
-
 		if(!strcmp(str, "sync")){
 			global_openflags = of_sync(global_openflags);
 			return(0);
@@ -524,7 +500,7 @@ static void ubd_handler(void)
 {
 	struct io_thread_req req;
 	struct request *rq = elv_next_request(ubd_queue);
-	int n, err;
+	int n;
 
 	do_ubd = NULL;
 	intr_count++;
@@ -538,19 +514,6 @@ static void ubd_handler(void)
 		return;
 	}
         
-	if((req.op != UBD_MMAP) &&
-	   ((req.offset != ((__u64) (rq->sector)) << 9) ||
-	    (req.length != (rq->current_nr_sectors) << 9)))
-		panic("I/O op mismatch");
-	
-	if(req.map_fd != -1){
-		err = physmem_subst_mapping(req.buffer, req.map_fd,
-					    req.map_offset, 1);
-		if(err)
-			printk("ubd_handler - physmem_subst_mapping failed, "
-			       "err = %d\n", -err);
-	}
-
 	ubd_finish(rq, req.error);
 	reactivate_fd(thread_fd, UBD_IRQ);	
 	do_ubd_request(ubd_queue);
@@ -583,14 +546,10 @@ static int ubd_file_size(struct ubd *dev, __u64 *size_out)
 
 static void ubd_close(struct ubd *dev)
 {
-	if(ubd_do_mmap)
-		physmem_forget_descriptor(dev->fd);
 	os_close_file(dev->fd);
 	if(dev->cow.file == NULL)
 		return;
 
-	if(ubd_do_mmap)
-		physmem_forget_descriptor(dev->cow.fd);
 	os_close_file(dev->cow.fd);
 	vfree(dev->cow.bitmap);
 	dev->cow.bitmap = NULL;
@@ -1010,94 +969,13 @@ static void cowify_req(struct io_thread_req *req, unsigned long *bitmap,
 			   req->bitmap_words, bitmap_len);
 }
 
-static int mmap_fd(struct request *req, struct ubd *dev, __u64 offset)
-{
-	__u64 sector;
-	unsigned char *bitmap;
-	int bit, i;
-
-	/* mmap must have been requested on the command line */
-	if(!ubd_do_mmap)
-		return(-1);
-
-	/* The buffer must be page aligned */
-	if(((unsigned long) req->buffer % UBD_MMAP_BLOCK_SIZE) != 0)
-		return(-1);
-
-	/* The request must be a page long */
-	if((req->current_nr_sectors << 9) != PAGE_SIZE)
-		return(-1);
-
-	if(dev->cow.file == NULL)
-		return(dev->fd);
-
-	sector = offset >> 9;
-	bitmap = (unsigned char *) dev->cow.bitmap;
-	bit = ubd_test_bit(sector, bitmap);
-
-	for(i = 1; i < req->current_nr_sectors; i++){
-		if(ubd_test_bit(sector + i, bitmap) != bit)
-			return(-1);
-	}
-
-	if(bit || (rq_data_dir(req) == WRITE))
-		offset += dev->cow.data_offset;
-
-	/* The data on disk must be page aligned */
-	if((offset % UBD_MMAP_BLOCK_SIZE) != 0)
-		return(-1);
-
-	return(bit ? dev->fd : dev->cow.fd);
-}
-
-static int prepare_mmap_request(struct ubd *dev, int fd, __u64 offset,
-				struct request *req,
-				struct io_thread_req *io_req)
-{
-	int err;
-
-	if(rq_data_dir(req) == WRITE){
-		/* Writes are almost no-ops since the new data is already in the
-		 * host page cache
-		 */
-		dev->map_writes++;
-		if(dev->cow.file != NULL)
-			cowify_bitmap(io_req->offset, io_req->length,
-				      &io_req->sector_mask, &io_req->cow_offset,
-				      dev->cow.bitmap, dev->cow.bitmap_offset,
-				      io_req->bitmap_words,
-				      dev->cow.bitmap_len);
-	}
-	else {
-		int w;
-
-		if((dev->cow.file != NULL) && (fd == dev->cow.fd))
-			w = 0;
-		else w = dev->openflags.w;
-
-		if((dev->cow.file != NULL) && (fd == dev->fd))
-			offset += dev->cow.data_offset;
-
-		err = physmem_subst_mapping(req->buffer, fd, offset, w);
-		if(err){
-			printk("physmem_subst_mapping failed, err = %d\n",
-			       -err);
-			return(1);
-		}
-		dev->map_reads++;
-	}
-	io_req->op = UBD_MMAP;
-	io_req->buffer = req->buffer;
-	return(0);
-}
-
 /* Called with ubd_io_lock held */
 static int prepare_request(struct request *req, struct io_thread_req *io_req)
 {
 	struct gendisk *disk = req->rq_disk;
 	struct ubd *dev = disk->private_data;
 	__u64 offset;
-	int len, fd;
+	int len;
 
 	if(req->rq_status == RQ_INACTIVE) return(1);
 
@@ -1114,34 +992,12 @@ static int prepare_request(struct request *req, struct io_thread_req *io_req)
 
 	io_req->fds[0] = (dev->cow.file != NULL) ? dev->cow.fd : dev->fd;
 	io_req->fds[1] = dev->fd;
-	io_req->map_fd = -1;
 	io_req->cow_offset = -1;
 	io_req->offset = offset;
 	io_req->length = len;
 	io_req->error = 0;
 	io_req->sector_mask = 0;
 
-	fd = mmap_fd(req, dev, io_req->offset);
-	if(fd > 0){
-		/* If mmapping is otherwise OK, but the first access to the
-		 * page is a write, then it's not mapped in yet.  So we have
-		 * to write the data to disk first, then we can map the disk
-		 * page in and continue normally from there.
-		 */
-		if((rq_data_dir(req) == WRITE) && !is_remapped(req->buffer)){
-			io_req->map_fd = dev->fd;
-			io_req->map_offset = io_req->offset +
-				dev->cow.data_offset;
-			dev->write_maps++;
-		}
-		else return(prepare_mmap_request(dev, fd, io_req->offset, req,
-						 io_req));
-	}
-
-	if(rq_data_dir(req) == READ)
-		dev->nomap_reads++;
-	else dev->nomap_writes++;
-
 	io_req->op = (rq_data_dir(req) == READ) ? UBD_READ : UBD_WRITE;
 	io_req->offsets[0] = 0;
 	io_req->offsets[1] = dev->cow.data_offset;
@@ -1229,143 +1085,6 @@ static int ubd_ioctl(struct inode * inode, struct file * file,
 	return(-EINVAL);
 }
 
-static int ubd_check_remapped(int fd, unsigned long address, int is_write,
-			      __u64 offset)
-{
-	__u64 bitmap_offset;
-	unsigned long new_bitmap[2];
-	int i, err, n;
-
-	/* If it's not a write access, we can't do anything about it */
-	if(!is_write)
-		return(0);
-
-	/* We have a write */
-	for(i = 0; i < sizeof(ubd_dev) / sizeof(ubd_dev[0]); i++){
-		struct ubd *dev = &ubd_dev[i];
-
-		if((dev->fd != fd) && (dev->cow.fd != fd))
-			continue;
-
-		/* It's a write to a ubd device */
-
-		/* This should be impossible now */
-		if(!dev->openflags.w){
-			/* It's a write access on a read-only device - probably
-			 * shouldn't happen.  If the kernel is trying to change
-			 * something with no intention of writing it back out,
-			 * then this message will clue us in that this needs
-			 * fixing
-			 */
-			printk("Write access to mapped page from readonly ubd "
-			       "device %d\n", i);
-			return(0);
-		}
-
-		/* It's a write to a writeable ubd device - it must be COWed
-		 * because, otherwise, the page would have been mapped in
-		 * writeable
-		 */
-
-		if(!dev->cow.file)
-			panic("Write fault on writeable non-COW ubd device %d",
-			      i);
-
-		/* It should also be an access to the backing file since the
-		 * COW pages should be mapped in read-write
-		 */
-
-		if(fd == dev->fd)
-			panic("Write fault on a backing page of ubd "
-			      "device %d\n", i);
-
-		/* So, we do the write, copying the backing data to the COW
-		 * file...
-		 */
-
-		err = os_seek_file(dev->fd, offset + dev->cow.data_offset);
-		if(err < 0)
-			panic("Couldn't seek to %lld in COW file of ubd "
-			      "device %d, err = %d",
-			      offset + dev->cow.data_offset, i, -err);
-
-		n = os_write_file(dev->fd, (void *) address, PAGE_SIZE);
-		if(n != PAGE_SIZE)
-			panic("Couldn't copy data to COW file of ubd "
-			      "device %d, err = %d", i, -n);
-
-		/* ... updating the COW bitmap... */
-
-		cowify_bitmap(offset, PAGE_SIZE, NULL, &bitmap_offset,
-			      dev->cow.bitmap, dev->cow.bitmap_offset,
-			      new_bitmap, dev->cow.bitmap_len);
-
-		err = os_seek_file(dev->fd, bitmap_offset);
-		if(err < 0)
-			panic("Couldn't seek to %lld in COW file of ubd "
-			      "device %d, err = %d", bitmap_offset, i, -err);
-
-		n = os_write_file(dev->fd, new_bitmap, sizeof(new_bitmap));
-		if(n != sizeof(new_bitmap))
-			panic("Couldn't update bitmap  of ubd device %d, "
-			      "err = %d", i, -n);
-
-		/* Maybe we can map the COW page in, and maybe we can't.  If
-		 * it is a pre-V3 COW file, we can't, since the alignment will
-		 * be wrong.  If it is a V3 or later COW file which has been
-		 * moved to a system with a larger page size, then maybe we
-		 * can't, depending on the exact location of the page.
-		 */
-
-		offset += dev->cow.data_offset;
-
-		/* Remove the remapping, putting the original anonymous page
-		 * back.  If the COW file can be mapped in, that is done.
-		 * Otherwise, the COW page is read in.
-		 */
-
-		if(!physmem_remove_mapping((void *) address))
-			panic("Address 0x%lx not remapped by ubd device %d",
-			      address, i);
-		if((offset % UBD_MMAP_BLOCK_SIZE) == 0)
-			physmem_subst_mapping((void *) address, dev->fd,
-					      offset, 1);
-		else {
-			err = os_seek_file(dev->fd, offset);
-			if(err < 0)
-				panic("Couldn't seek to %lld in COW file of "
-				      "ubd device %d, err = %d", offset, i,
-				      -err);
-
-			n = os_read_file(dev->fd, (void *) address, PAGE_SIZE);
-			if(n != PAGE_SIZE)
-				panic("Failed to read page from offset %llx of "
-				      "COW file of ubd device %d, err = %d",
-				      offset, i, -n);
-		}
-
-		return(1);
-	}
-
-	/* It's not a write on a ubd device */
-	return(0);
-}
-
-static struct remapper ubd_remapper = {
-	.list	= LIST_HEAD_INIT(ubd_remapper.list),
-	.proc	= ubd_check_remapped,
-};
-
-static int ubd_remapper_setup(void)
-{
-	if(ubd_do_mmap)
-		register_remapper(&ubd_remapper);
-
-	return(0);
-}
-
-__initcall(ubd_remapper_setup);
-
 static int same_backing_files(char *from_cmdline, char *from_cow, char *cow)
 {
 	struct uml_stat buf1, buf2;
@@ -1568,15 +1287,6 @@ void do_io(struct io_thread_req *req)
 	int err;
 	__u64 off;
 
-	if(req->op == UBD_MMAP){
-		/* Touch the page to force the host to do any necessary IO to
-		 * get it into memory
-		 */
-		n = *((volatile int *) req->buffer);
-		req->error = update_bitmap(req);
-		return;
-	}
-
 	nsectors = req->length / req->sectorsize;
 	start = 0;
 	do {

arch/um/include/sysdep-i386/ptrace.h

@@ -31,7 +31,6 @@ extern int sysemu_supported;
 #ifdef UML_CONFIG_MODE_SKAS
 
 #include "skas_ptregs.h"
-#include "sysdep/faultinfo.h"
 
 #define REGS_IP(r) ((r)[HOST_IP])
 #define REGS_SP(r) ((r)[HOST_SP])
@@ -59,6 +58,7 @@ extern int sysemu_supported;
 #define PTRACE_SYSEMU_SINGLESTEP 32
 #endif
 
+#include "sysdep/faultinfo.h"
 #include "choose-mode.h"
 
 union uml_pt_regs {

arch/um/include/sysdep-x86_64/checksum.h

@@ -9,8 +9,6 @@
 #include "linux/in6.h"
 #include "asm/uaccess.h"
 
-extern unsigned int csum_partial_copy_from(const unsigned char *src, unsigned char *dst, int len,
-					   int sum, int *err_ptr);
 extern unsigned csum_partial(const unsigned char *buff, unsigned len,
                              unsigned sum);
 
@@ -31,10 +29,15 @@ unsigned int csum_partial_copy_nocheck(const unsigned char *src, unsigned char *
 }
 
 static __inline__
-unsigned int csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst,
-					 int len, int sum, int *err_ptr)
+unsigned int csum_partial_copy_from_user(const unsigned char *src,
+                                         unsigned char *dst, int len, int sum,
+                                         int *err_ptr)
 {
-	return csum_partial_copy_from(src, dst, len, sum, err_ptr);
+        if(copy_from_user(dst, src, len)){
+                *err_ptr = -EFAULT;
+                return(-1);
+        }
+        return csum_partial(dst, len, sum);
 }
 
 /**
@@ -137,15 +140,6 @@ static inline unsigned add32_with_carry(unsigned a, unsigned b)
         return a;
 }
 
-#endif
+extern unsigned short ip_compute_csum(unsigned char * buff, int len);
 
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+#endif

arch/um/include/sysdep-x86_64/ptrace.h

@@ -135,6 +135,7 @@ extern int mode_tt;
 	__CHOOSE_MODE(SC_EFLAGS(UPT_SC(r)), REGS_EFLAGS((r)->skas.regs))
 #define UPT_SC(r) ((r)->tt.sc)
 #define UPT_SYSCALL_NR(r) __CHOOSE_MODE((r)->tt.syscall, (r)->skas.syscall)
+#define UPT_SYSCALL_RET(r) UPT_RAX(r)
 
 extern int user_context(unsigned long sp);
 
@@ -196,32 +197,32 @@ struct syscall_args {
 
 
 #define UPT_SET(regs, reg, val) \
-        ({      unsigned long val; \
+        ({      unsigned long __upt_val = val; \
                 switch(reg){ \
-		case R8: UPT_R8(regs) = val; break; \
-		case R9: UPT_R9(regs) = val; break; \
-		case R10: UPT_R10(regs) = val; break; \
-		case R11: UPT_R11(regs) = val; break; \
-		case R12: UPT_R12(regs) = val; break; \
-		case R13: UPT_R13(regs) = val; break; \
-		case R14: UPT_R14(regs) = val; break; \
-		case R15: UPT_R15(regs) = val; break; \
-                case RIP: UPT_IP(regs) = val; break; \
-                case RSP: UPT_SP(regs) = val; break; \
-                case RAX: UPT_RAX(regs) = val; break; \
-                case RBX: UPT_RBX(regs) = val; break; \
-                case RCX: UPT_RCX(regs) = val; break; \
-                case RDX: UPT_RDX(regs) = val; break; \
-                case RSI: UPT_RSI(regs) = val; break; \
-                case RDI: UPT_RDI(regs) = val; break; \
-                case RBP: UPT_RBP(regs) = val; break; \
-                case ORIG_RAX: UPT_ORIG_RAX(regs) = val; break; \
-                case CS: UPT_CS(regs) = val; break; \
-                case DS: UPT_DS(regs) = val; break; \
-                case ES: UPT_ES(regs) = val; break; \
-                case FS: UPT_FS(regs) = val; break; \
-                case GS: UPT_GS(regs) = val; break; \
-                case EFLAGS: UPT_EFLAGS(regs) = val; break; \
+                case R8: UPT_R8(regs) = __upt_val; break; \
+                case R9: UPT_R9(regs) = __upt_val; break; \
+                case R10: UPT_R10(regs) = __upt_val; break; \
+                case R11: UPT_R11(regs) = __upt_val; break; \
+                case R12: UPT_R12(regs) = __upt_val; break; \
+                case R13: UPT_R13(regs) = __upt_val; break; \
+                case R14: UPT_R14(regs) = __upt_val; break; \
+                case R15: UPT_R15(regs) = __upt_val; break; \
+                case RIP: UPT_IP(regs) = __upt_val; break; \
+                case RSP: UPT_SP(regs) = __upt_val; break; \
+                case RAX: UPT_RAX(regs) = __upt_val; break; \
+                case RBX: UPT_RBX(regs) = __upt_val; break; \
+                case RCX: UPT_RCX(regs) = __upt_val; break; \
+                case RDX: UPT_RDX(regs) = __upt_val; break; \
+                case RSI: UPT_RSI(regs) = __upt_val; break; \
+                case RDI: UPT_RDI(regs) = __upt_val; break; \
+                case RBP: UPT_RBP(regs) = __upt_val; break; \
+                case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break; \
+                case CS: UPT_CS(regs) = __upt_val; break; \
+                case DS: UPT_DS(regs) = __upt_val; break; \
+                case ES: UPT_ES(regs) = __upt_val; break; \
+                case FS: UPT_FS(regs) = __upt_val; break; \
+                case GS: UPT_GS(regs) = __upt_val; break; \
+                case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break; \
                 default :  \
                         panic("Bad register in UPT_SET : %d\n", reg);  \
 			break; \
@@ -245,14 +246,3 @@ struct syscall_args {
         CHOOSE_MODE((&(r)->tt.faultinfo), (&(r)->skas.faultinfo))
 
 #endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */

arch/um/include/user_util.h

@@ -67,7 +67,6 @@ extern void *um_kmalloc(int size);
 extern int switcheroo(int fd, int prot, void *from, void *to, int size);
 extern void setup_machinename(char *machine_out);
 extern void setup_hostinfo(void);
-extern void add_arg(char *arg);
 extern void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int));
 extern void init_new_thread_signals(int altstack);
 extern void do_exec(int old_pid, int new_pid);

arch/um/kernel/Makefile

@@ -14,7 +14,7 @@ obj-y = config.o exec_kern.o exitcode.o \
 	tlb.o trap_kern.o trap_user.o uaccess_user.o um_arch.o umid.o \
 	user_util.o
 
-obj-$(CONFIG_BLK_DEV_INITRD) += initrd_kern.o initrd_user.o
+obj-$(CONFIG_BLK_DEV_INITRD) += initrd.o
 obj-$(CONFIG_GPROF)	+= gprof_syms.o
 obj-$(CONFIG_GCOV)	+= gmon_syms.o
 obj-$(CONFIG_TTY_LOG)	+= tty_log.o
@@ -23,14 +23,10 @@ obj-$(CONFIG_SYSCALL_DEBUG) += syscall_user.o
 obj-$(CONFIG_MODE_TT) += tt/
 obj-$(CONFIG_MODE_SKAS) += skas/
 
-# This needs be compiled with frame pointers regardless of how the rest of the
-# kernel is built.
-CFLAGS_frame.o := -fno-omit-frame-pointer
-
 user-objs-$(CONFIG_TTY_LOG) += tty_log.o
 
 USER_OBJS := $(user-objs-y) config.o helper.o main.o process.o tempfile.o \
-	time.o tty_log.o umid.o user_util.o frame.o
+	time.o tty_log.o umid.o user_util.o
 
 include arch/um/scripts/Makefile.rules
 

arch/um/kernel/initrd.c

@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Licensed under the GPL
+ */
+
+#include "linux/init.h"
+#include "linux/bootmem.h"
+#include "linux/initrd.h"
+#include "asm/types.h"
+#include "user_util.h"
+#include "kern_util.h"
+#include "initrd.h"
+#include "init.h"
+#include "os.h"
+
+/* Changed by uml_initrd_setup, which is a setup */
+static char *initrd __initdata = NULL;
+
+static int __init read_initrd(void)
+{
+	void *area;
+	long long size;
+	int err;
+
+	if(initrd == NULL) return 0;
+	err = os_file_size(initrd, &size);
+	if(err) return 0;
+	area = alloc_bootmem(size);
+	if(area == NULL) return 0;
+	if(load_initrd(initrd, area, size) == -1) return 0;
+	initrd_start = (unsigned long) area;
+	initrd_end = initrd_start + size;
+	return 0;
+}
+
+__uml_postsetup(read_initrd);
+
+static int __init uml_initrd_setup(char *line, int *add)
+{
+	initrd = line;
+	return 0;
+}
+
+__uml_setup("initrd=", uml_initrd_setup,
+"initrd=<initrd image>\n"
+"    This is used to boot UML from an initrd image.  The argument is the\n"
+"    name of the file containing the image.\n\n"
+);
+
+int load_initrd(char *filename, void *buf, int size)
+{
+	int fd, n;
+
+	fd = os_open_file(filename, of_read(OPENFLAGS()), 0);
+	if(fd < 0){
+		printk("Opening '%s' failed - err = %d\n", filename, -fd);
+		return(-1);
+	}
+	n = os_read_file(fd, buf, size);
+	if(n != size){
+		printk("Read of %d bytes from '%s' failed, err = %d\n", size,
+		       filename, -n);
+		return(-1);
+	}
+
+	os_close_file(fd);
+	return(0);
+}
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-file-style: "linux"
+ * End:
+ */

arch/um/kernel/irq_user.c

@@ -236,9 +236,15 @@ static void free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg)
 				       (*prev)->fd, pollfds[i].fd);
 				goto out;
 			}
-			memcpy(&pollfds[i], &pollfds[i + 1],
-			       (pollfds_num - i - 1) * sizeof(pollfds[0]));
+
 			pollfds_num--;
+
+			/* This moves the *whole* array after pollfds[i] (though
+			 * it doesn't spot as such)! */
+
+			memmove(&pollfds[i], &pollfds[i + 1],
+			       (pollfds_num - i) * sizeof(pollfds[0]));
+
 			if(last_irq_ptr == &old_fd->next) 
 				last_irq_ptr = prev;
 			*prev = (*prev)->next;

arch/um/kernel/ksyms.c

@@ -57,6 +57,7 @@ EXPORT_SYMBOL(copy_to_user_tt);
 EXPORT_SYMBOL(strncpy_from_user_skas);
 EXPORT_SYMBOL(copy_to_user_skas);
 EXPORT_SYMBOL(copy_from_user_skas);
+EXPORT_SYMBOL(clear_user_skas);
 #endif
 EXPORT_SYMBOL(uml_strdup);
 

arch/um/kernel/mem.c

@@ -100,12 +100,37 @@ void mem_init(void)
 #endif
 }
 
+/*
+ * Create a page table and place a pointer to it in a middle page
+ * directory entry.
+ */
+static void __init one_page_table_init(pmd_t *pmd)
+{
+	if (pmd_none(*pmd)) {
+		pte_t *pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+		set_pmd(pmd, __pmd(_KERNPG_TABLE +
+					   (unsigned long) __pa(pte)));
+		if (pte != pte_offset_kernel(pmd, 0))
+			BUG();
+	}
+}
+
+static void __init one_md_table_init(pud_t *pud)
+{
+#ifdef CONFIG_3_LEVEL_PGTABLES
+	pmd_t *pmd_table = (pmd_t *) alloc_bootmem_low_pages(PAGE_SIZE);
+	set_pud(pud, __pud(_KERNPG_TABLE + (unsigned long) __pa(pmd_table)));
+	if (pmd_table != pmd_offset(pud, 0))
+		BUG();
+#endif
+}
+
 static void __init fixrange_init(unsigned long start, unsigned long end, 
 				 pgd_t *pgd_base)
 {
 	pgd_t *pgd;
+	pud_t *pud;
 	pmd_t *pmd;
-	pte_t *pte;
 	int i, j;
 	unsigned long vaddr;
 
@@ -115,15 +140,12 @@ static void __init fixrange_init(unsigned long start, unsigned long end,
 	pgd = pgd_base + i;
 
 	for ( ; (i < PTRS_PER_PGD) && (vaddr < end); pgd++, i++) {
-		pmd = (pmd_t *)pgd;
+		pud = pud_offset(pgd, vaddr);
+		if (pud_none(*pud))
+			one_md_table_init(pud);
+		pmd = pmd_offset(pud, vaddr);
 		for (; (j < PTRS_PER_PMD) && (vaddr != end); pmd++, j++) {
-			if (pmd_none(*pmd)) {
-				pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE);
-				set_pmd(pmd, __pmd(_KERNPG_TABLE + 
-						   (unsigned long) __pa(pte)));
-				if (pte != pte_offset_kernel(pmd, 0))
-					BUG();
-			}
+			one_page_table_init(pmd);
 			vaddr += PMD_SIZE;
 		}
 		j = 0;

arch/um/kernel/process_kern.c

@@ -115,16 +115,6 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
 	return(pid);
 }
 
-void switch_mm(struct mm_struct *prev, struct mm_struct *next, 
-	       struct task_struct *tsk)
-{
-	int cpu = smp_processor_id();
-
-	if (prev != next) 
-		cpu_clear(cpu, prev->cpu_vm_mask);
-	cpu_set(cpu, next->cpu_vm_mask);
-}
-
 void set_current(void *t)
 {
 	struct task_struct *task = t;
@@ -152,7 +142,6 @@ void release_thread(struct task_struct *task)
  
 void exit_thread(void)
 {
-	CHOOSE_MODE(exit_thread_tt(), exit_thread_skas());
 	unprotect_stack((unsigned long) current_thread);
 }
  
@@ -476,12 +465,21 @@ int singlestepping(void * t)
 	return 2;
 }
 
+/*
+ * Only x86 and x86_64 have an arch_align_stack().
+ * All other arches have "#define arch_align_stack(x) (x)"
+ * in their asm/system.h
+ * As this is included in UML from asm-um/system-generic.h,
+ * we can use it to behave as the subarch does.
+ */
+#ifndef arch_align_stack
 unsigned long arch_align_stack(unsigned long sp)
 {
 	if (randomize_va_space)
 		sp -= get_random_int() % 8192;
 	return sp & ~0xf;
 }
+#endif
 
 
 /*

arch/um/kernel/ptrace.c

@@ -19,15 +19,30 @@
 #include "skas_ptrace.h"
 #include "sysdep/ptrace.h"
 
+static inline void set_singlestepping(struct task_struct *child, int on)
+{
+        if (on)
+                child->ptrace |= PT_DTRACE;
+        else
+                child->ptrace &= ~PT_DTRACE;
+        child->thread.singlestep_syscall = 0;
+
+#ifdef SUBARCH_SET_SINGLESTEPPING
+        SUBARCH_SET_SINGLESTEPPING(child, on);
+#endif
+}
+
 /*
  * Called by kernel/ptrace.c when detaching..
  */
 void ptrace_disable(struct task_struct *child)
 { 
-	child->ptrace &= ~PT_DTRACE;
-	child->thread.singlestep_syscall = 0;
+        set_singlestepping(child,0);
 }
 
+extern int peek_user(struct task_struct * child, long addr, long data);
+extern int poke_user(struct task_struct * child, long addr, long data);
+
 long sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
@@ -67,6 +82,10 @@ long sys_ptrace(long request, long pid, long addr, long data)
 		goto out_tsk;
 	}
 
+#ifdef SUBACH_PTRACE_SPECIAL
+        SUBARCH_PTRACE_SPECIAL(child,request,addr,data);
+#endif
+
 	ret = ptrace_check_attach(child, request == PTRACE_KILL);
 	if (ret < 0)
 		goto out_tsk;
@@ -87,28 +106,9 @@ long sys_ptrace(long request, long pid, long addr, long data)
 	}
 
 	/* read the word at location addr in the USER area. */
-	case PTRACE_PEEKUSR: {
-		unsigned long tmp;
-
-		ret = -EIO;
-		if ((addr & 3) || addr < 0) 
-			break;
-
-		tmp = 0;  /* Default return condition */
-		if(addr < MAX_REG_OFFSET){
-			tmp = getreg(child, addr);
-		}
-#if defined(CONFIG_UML_X86) && !defined(CONFIG_64BIT)
-		else if((addr >= offsetof(struct user, u_debugreg[0])) &&
-			(addr <= offsetof(struct user, u_debugreg[7]))){
-			addr -= offsetof(struct user, u_debugreg[0]);
-			addr = addr >> 2;
-			tmp = child->thread.arch.debugregs[addr];
-		}
-#endif
-		ret = put_user(tmp, (unsigned long __user *) data);
-		break;
-	}
+        case PTRACE_PEEKUSR:
+                ret = peek_user(child, addr, data);
+                break;
 
 	/* when I and D space are separate, this will have to be fixed. */
 	case PTRACE_POKETEXT: /* write the word at location addr. */
@@ -121,26 +121,8 @@ long sys_ptrace(long request, long pid, long addr, long data)
 		break;
 
 	case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
-		ret = -EIO;
-		if ((addr & 3) || addr < 0)
-			break;
-
-		if (addr < MAX_REG_OFFSET) {
-			ret = putreg(child, addr, data);
-			break;
-		}
-#if defined(CONFIG_UML_X86) && !defined(CONFIG_64BIT)
-		else if((addr >= offsetof(struct user, u_debugreg[0])) &&
-			(addr <= offsetof(struct user, u_debugreg[7]))){
-			  addr -= offsetof(struct user, u_debugreg[0]);
-			  addr = addr >> 2;
-			  if((addr == 4) || (addr == 5)) break;
-			  child->thread.arch.debugregs[addr] = data;
-			  ret = 0;
-		}
-#endif
-
-		break;
+                ret = poke_user(child, addr, data);
+                break;
 
 	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
 	case PTRACE_CONT: { /* restart after signal. */
@@ -148,8 +130,7 @@ long sys_ptrace(long request, long pid, long addr, long data)
 		if (!valid_signal(data))
 			break;
 
-		child->ptrace &= ~PT_DTRACE;
-		child->thread.singlestep_syscall = 0;
+                set_singlestepping(child, 0);
 		if (request == PTRACE_SYSCALL) {
 			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
 		}
@@ -172,8 +153,7 @@ long sys_ptrace(long request, long pid, long addr, long data)
 		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
 			break;
 
-		child->ptrace &= ~PT_DTRACE;
-		child->thread.singlestep_syscall = 0;
+                set_singlestepping(child, 0);
 		child->exit_code = SIGKILL;
 		wake_up_process(child);
 		break;
@@ -184,8 +164,7 @@ long sys_ptrace(long request, long pid, long addr, long data)
 		if (!valid_signal(data))
 			break;
 		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->ptrace |= PT_DTRACE;
-		child->thread.singlestep_syscall = 0;
+                set_singlestepping(child, 1);
 		child->exit_code = data;
 		/* give it a chance to run. */
 		wake_up_process(child);

arch/um/kernel/skas/include/mode_kern-skas.h

@@ -18,7 +18,6 @@ extern int copy_thread_skas(int nr, unsigned long clone_flags,
 			    unsigned long sp, unsigned long stack_top,
 			    struct task_struct *p, struct pt_regs *regs);
 extern void release_thread_skas(struct task_struct *task);
-extern void exit_thread_skas(void);
 extern void initial_thread_cb_skas(void (*proc)(void *), void *arg);
 extern void init_idle_skas(void);
 extern void flush_tlb_kernel_range_skas(unsigned long start,

arch/um/kernel/skas/include/uaccess-skas.h

@@ -18,8 +18,8 @@
 	  ((unsigned long) (addr) + (size) <= FIXADDR_USER_END) && \
 	  ((unsigned long) (addr) + (size) >= (unsigned long)(addr))))
 
-static inline int __deprecated verify_area_skas(int type, const void * addr,
-				   unsigned long size)
+static inline int verify_area_skas(int type, const void * addr,
+                                   unsigned long size)
 {
 	return(access_ok_skas(type, addr, size) ? 0 : -EFAULT);
 }

arch/um/kernel/skas/process.c

@@ -201,6 +201,11 @@ void userspace(union uml_pt_regs *regs)
 		}
 	}
 }
+#define INIT_JMP_NEW_THREAD 0
+#define INIT_JMP_REMOVE_SIGSTACK 1
+#define INIT_JMP_CALLBACK 2
+#define INIT_JMP_HALT 3
+#define INIT_JMP_REBOOT 4
 
 void new_thread(void *stack, void **switch_buf_ptr, void **fork_buf_ptr,
 		void (*handler)(int))
@@ -236,7 +241,7 @@ void thread_wait(void *sw, void *fb)
 	*switch_buf = &buf;
 	fork_buf = fb;
 	if(sigsetjmp(buf, 1) == 0)
-		siglongjmp(*fork_buf, 1);
+		siglongjmp(*fork_buf, INIT_JMP_REMOVE_SIGSTACK);
 }
 
 void switch_threads(void *me, void *next)
@@ -266,21 +271,25 @@ int start_idle_thread(void *stack, void *switch_buf_ptr, void **fork_buf_ptr)
 
 	*fork_buf_ptr = &initial_jmpbuf;
 	n = sigsetjmp(initial_jmpbuf, 1);
-	if(n == 0)
-		new_thread_proc((void *) stack, new_thread_handler);
-	else if(n == 1)
-		remove_sigstack();
-	else if(n == 2){
+        switch(n){
+        case INIT_JMP_NEW_THREAD:
+                new_thread_proc((void *) stack, new_thread_handler);
+                break;
+        case INIT_JMP_REMOVE_SIGSTACK:
+                remove_sigstack();
+                break;
+        case INIT_JMP_CALLBACK:
 		(*cb_proc)(cb_arg);
 		siglongjmp(*cb_back, 1);
-	}
-	else if(n == 3){
+                break;
+        case INIT_JMP_HALT:
 		kmalloc_ok = 0;
 		return(0);
-	}
-	else if(n == 4){
+        case INIT_JMP_REBOOT:
 		kmalloc_ok = 0;
 		return(1);
+        default:
+                panic("Bad sigsetjmp return in start_idle_thread - %d\n", n);
 	}
 	siglongjmp(**switch_buf, 1);
 }
@@ -305,7 +314,7 @@ void initial_thread_cb_skas(void (*proc)(void *), void *arg)
 
 	block_signals();
 	if(sigsetjmp(here, 1) == 0)
-		siglongjmp(initial_jmpbuf, 2);
+		siglongjmp(initial_jmpbuf, INIT_JMP_CALLBACK);
 	unblock_signals();
 
 	cb_proc = NULL;
@@ -316,13 +325,13 @@ void initial_thread_cb_skas(void (*proc)(void *), void *arg)
 void halt_skas(void)
 {
 	block_signals();
-	siglongjmp(initial_jmpbuf, 3);
+	siglongjmp(initial_jmpbuf, INIT_JMP_HALT);
 }
 
 void reboot_skas(void)
 {
 	block_signals();
-	siglongjmp(initial_jmpbuf, 4);
+	siglongjmp(initial_jmpbuf, INIT_JMP_REBOOT);
 }
 
 void switch_mm_skas(int mm_fd)

arch/um/kernel/skas/process_kern.c

@@ -83,10 +83,6 @@ void release_thread_skas(struct task_struct *task)
 {
 }
 
-void exit_thread_skas(void)
-{
-}
-
 void fork_handler(int sig)
 {
         change_sig(SIGUSR1, 1);

arch/um/kernel/skas/uaccess.c

@@ -29,9 +29,12 @@ static unsigned long maybe_map(unsigned long virt, int is_write)
 	if(IS_ERR(phys) || (is_write && !pte_write(pte))){
 		err = handle_page_fault(virt, 0, is_write, 1, &dummy_code);
 		if(err)
-			return(0);
+			return(-1UL);
 		phys = um_virt_to_phys(current, virt, NULL);
 	}
+        if(IS_ERR(phys))
+                phys = (void *) -1;
+
 	return((unsigned long) phys);
 }
 
@@ -42,7 +45,7 @@ static int do_op(unsigned long addr, int len, int is_write,
 	int n;
 
 	addr = maybe_map(addr, is_write);
-	if(addr == -1)
+	if(addr == -1UL)
 		return(-1);
 
 	page = phys_to_page(addr);

arch/um/kernel/syscall_kern.c

@@ -17,7 +17,6 @@
 #include "linux/utime.h"
 #include "asm/mman.h"
 #include "asm/uaccess.h"
-#include "asm/ipc.h"
 #include "kern_util.h"
 #include "user_util.h"
 #include "sysdep/syscalls.h"

arch/um/kernel/trap_kern.c

@@ -48,7 +48,7 @@ int handle_page_fault(unsigned long address, unsigned long ip,
 		goto good_area;
 	else if(!(vma->vm_flags & VM_GROWSDOWN)) 
 		goto out;
-	else if(!ARCH_IS_STACKGROW(address))
+	else if(is_user && !ARCH_IS_STACKGROW(address))
 		goto out;
 	else if(expand_stack(vma, address)) 
 		goto out;
@@ -57,10 +57,11 @@ int handle_page_fault(unsigned long address, unsigned long ip,
 	*code_out = SEGV_ACCERR;
 	if(is_write && !(vma->vm_flags & VM_WRITE)) 
 		goto out;
+
+        if(!(vma->vm_flags & (VM_READ | VM_EXEC)))
+                goto out;
+
 	page = address & PAGE_MASK;
-	pgd = pgd_offset(mm, page);
-	pud = pud_offset(pgd, page);
-	pmd = pmd_offset(pud, page);
 	do {
  survive:
 		switch (handle_mm_fault(mm, vma, address, is_write)){
@@ -106,33 +107,6 @@ out_of_memory:
 	goto out;
 }
 
-LIST_HEAD(physmem_remappers);
-
-void register_remapper(struct remapper *info)
-{
-	list_add(&info->list, &physmem_remappers);
-}
-
-static int check_remapped_addr(unsigned long address, int is_write)
-{
-	struct remapper *remapper;
-	struct list_head *ele;
-	__u64 offset;
-	int fd;
-
-	fd = phys_mapping(__pa(address), &offset);
-	if(fd == -1)
-		return(0);
-
-	list_for_each(ele, &physmem_remappers){
-		remapper = list_entry(ele, struct remapper, list);
-		if((*remapper->proc)(fd, address, is_write, offset))
-			return(1);
-	}
-
-	return(0);
-}
-
 /*
  * We give a *copy* of the faultinfo in the regs to segv.
  * This must be done, since nesting SEGVs could overwrite
@@ -151,8 +125,6 @@ unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc)
                 flush_tlb_kernel_vm();
                 return(0);
         }
-	else if(check_remapped_addr(address & PAGE_MASK, is_write))
-		return(0);
 	else if(current->mm == NULL)
 		panic("Segfault with no mm");
 	err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);

arch/um/kernel/tt/include/mode_kern-tt.h

@@ -19,7 +19,6 @@ extern int copy_thread_tt(int nr, unsigned long clone_flags, unsigned long sp,
 			  unsigned long stack_top, struct task_struct *p,
 			  struct pt_regs *regs);
 extern void release_thread_tt(struct task_struct *task);
-extern void exit_thread_tt(void);
 extern void initial_thread_cb_tt(void (*proc)(void *), void *arg);
 extern void init_idle_tt(void);
 extern void flush_tlb_kernel_range_tt(unsigned long start, unsigned long end);

arch/um/kernel/tt/include/uaccess-tt.h

@@ -33,8 +33,8 @@ extern unsigned long uml_physmem;
          (((unsigned long) (addr) <= ((unsigned long) (addr) + (size))) && \
           (under_task_size(addr, size) || is_stack(addr, size))))
 
-static inline int __deprecated verify_area_tt(int type, const void * addr,
-				 unsigned long size)
+static inline int verify_area_tt(int type, const void * addr,
+                                 unsigned long size)
 {
 	return(access_ok_tt(type, addr, size) ? 0 : -EFAULT);
 }

arch/um/kernel/tt/ksyms.c

@@ -12,6 +12,7 @@ EXPORT_SYMBOL(__do_copy_to_user);
 EXPORT_SYMBOL(__do_strncpy_from_user);
 EXPORT_SYMBOL(__do_strnlen_user); 
 EXPORT_SYMBOL(__do_clear_user);
+EXPORT_SYMBOL(clear_user_tt);
 
 EXPORT_SYMBOL(tracing_pid);
 EXPORT_SYMBOL(honeypot);

arch/um/kernel/tt/mem.c

@@ -21,14 +21,8 @@ void before_mem_tt(unsigned long brk_start)
 	remap_data(UML_ROUND_DOWN(&__bss_start), UML_ROUND_UP(&_end), 1);
 }
 
-#ifdef CONFIG_HOST_2G_2G
-#define TOP 0x80000000
-#else
-#define TOP 0xc0000000
-#endif
-
 #define SIZE ((CONFIG_NEST_LEVEL + CONFIG_KERNEL_HALF_GIGS) * 0x20000000)
-#define START (TOP - SIZE)
+#define START (CONFIG_TOP_ADDR - SIZE)
 
 unsigned long set_task_sizes_tt(int arg, unsigned long *host_size_out, 
 				unsigned long *task_size_out)

arch/um/kernel/tt/process_kern.c

@@ -65,8 +65,7 @@ void *switch_to_tt(void *prev, void *next, void *last)
 		panic("write of switch_pipe failed, err = %d", -err);
 
 	reading = 1;
-	if((from->exit_state == EXIT_ZOMBIE) ||
-	   (from->exit_state == EXIT_DEAD))
+        if(from->thread.mode.tt.switch_pipe[0] == -1)
 		os_kill_process(os_getpid(), 0);
 
 	err = os_read_file(from->thread.mode.tt.switch_pipe[0], &c, sizeof(c));
@@ -81,8 +80,7 @@ void *switch_to_tt(void *prev, void *next, void *last)
 	 * in case it has not already killed itself.
 	 */
 	prev_sched = current->thread.prev_sched;
-	if((prev_sched->exit_state == EXIT_ZOMBIE) ||
-	   (prev_sched->exit_state == EXIT_DEAD))
+        if(prev_sched->thread.mode.tt.switch_pipe[0] == -1)
 		os_kill_process(prev_sched->thread.mode.tt.extern_pid, 1);
 
 	change_sig(SIGVTALRM, vtalrm);
@@ -101,14 +99,18 @@ void release_thread_tt(struct task_struct *task)
 {
 	int pid = task->thread.mode.tt.extern_pid;
 
+	/*
+         * We first have to kill the other process, before
+         * closing its switch_pipe. Else it might wake up
+         * and receive "EOF" before we could kill it.
+         */
 	if(os_getpid() != pid)
 		os_kill_process(pid, 0);
-}
 
-void exit_thread_tt(void)
-{
-	os_close_file(current->thread.mode.tt.switch_pipe[0]);
-	os_close_file(current->thread.mode.tt.switch_pipe[1]);
+        os_close_file(task->thread.mode.tt.switch_pipe[0]);
+        os_close_file(task->thread.mode.tt.switch_pipe[1]);
+	/* use switch_pipe as flag: thread is released */
+        task->thread.mode.tt.switch_pipe[0] = -1;
 }
 
 void suspend_new_thread(int fd)

arch/um/kernel/tt/syscall_user.c

@@ -63,6 +63,10 @@ void do_syscall(void *task, int pid, int local_using_sysemu)
 
 	UPT_SYSCALL_NR(TASK_REGS(task)) = PT_SYSCALL_NR(proc_regs);
 
+#ifdef UPT_ORIGGPR2
+        UPT_ORIGGPR2(TASK_REGS(task)) = REGS_ORIGGPR2(proc_regs);
+#endif
+
 	if(((unsigned long *) PT_IP(proc_regs) >= &_stext) &&
 	   ((unsigned long *) PT_IP(proc_regs) <= &_etext))
 		tracer_panic("I'm tracing myself and I can't get out");

arch/um/kernel/um_arch.c

@@ -23,6 +23,7 @@
 #include "asm/ptrace.h"
 #include "asm/elf.h"
 #include "asm/user.h"
+#include "asm/setup.h"
 #include "ubd_user.h"
 #include "asm/current.h"
 #include "asm/setup.h"
@@ -42,9 +43,9 @@
 #define DEFAULT_COMMAND_LINE "root=98:0"
 
 /* Changed in linux_main and setup_arch, which run before SMP is started */
-char command_line[COMMAND_LINE_SIZE] = { 0 };
+static char command_line[COMMAND_LINE_SIZE] = { 0 };
 
-void add_arg(char *arg)
+static void add_arg(char *arg)
 {
 	if (strlen(command_line) + strlen(arg) + 1 > COMMAND_LINE_SIZE) {
 		printf("add_arg: Too many command line arguments!\n");
@@ -449,7 +450,7 @@ void __init setup_arch(char **cmdline_p)
 {
 	notifier_chain_register(&panic_notifier_list, &panic_exit_notifier);
 	paging_init();
- 	strlcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
+        strlcpy(saved_command_line, command_line, COMMAND_LINE_SIZE);
  	*cmdline_p = command_line;
 	setup_hostinfo();
 }

arch/um/kernel/uml.lds.S

@@ -73,6 +73,8 @@ SECTIONS
 
   .got           : { *(.got.plt) *(.got) }
   .dynamic       : { *(.dynamic) }
+  .tdata	  : { *(.tdata .tdata.* .gnu.linkonce.td.*) }
+  .tbss		  : { *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon) }
   /* We want the small data sections together, so single-instruction offsets
      can access them all, and initialized data all before uninitialized, so
      we can shorten the on-disk segment size.  */

arch/um/sys-i386/Makefile

@@ -9,11 +9,11 @@ USER_OBJS := bugs.o ptrace_user.o sigcontext.o fault.o
 
 SYMLINKS = bitops.c semaphore.c highmem.c module.c
 
+include arch/um/scripts/Makefile.rules
+
 bitops.c-dir = lib
 semaphore.c-dir = kernel
 highmem.c-dir = mm
 module.c-dir = kernel
 
 subdir- := util
-
-include arch/um/scripts/Makefile.rules

arch/um/sys-i386/delay.c

@@ -1,5 +1,7 @@
-#include "linux/delay.h"
-#include "asm/param.h"
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <asm/param.h>
 
 void __delay(unsigned long time)
 {
@@ -20,13 +22,19 @@ void __udelay(unsigned long usecs)
 	int i, n;
 
 	n = (loops_per_jiffy * HZ * usecs) / MILLION;
-	for(i=0;i<n;i++) ;
+        for(i=0;i<n;i++)
+                cpu_relax();
 }
 
+EXPORT_SYMBOL(__udelay);
+
 void __const_udelay(unsigned long usecs)
 {
 	int i, n;
 
 	n = (loops_per_jiffy * HZ * usecs) / MILLION;
-	for(i=0;i<n;i++) ;
+        for(i=0;i<n;i++)
+                cpu_relax();
 }
+
+EXPORT_SYMBOL(__const_udelay);

arch/um/sys-i386/ptrace.c

@@ -73,6 +73,25 @@ int putreg(struct task_struct *child, int regno, unsigned long value)
 	return 0;
 }
 
+int poke_user(struct task_struct *child, long addr, long data)
+{
+        if ((addr & 3) || addr < 0)
+                return -EIO;
+
+        if (addr < MAX_REG_OFFSET)
+                return putreg(child, addr, data);
+
+        else if((addr >= offsetof(struct user, u_debugreg[0])) &&
+                (addr <= offsetof(struct user, u_debugreg[7]))){
+                addr -= offsetof(struct user, u_debugreg[0]);
+                addr = addr >> 2;
+                if((addr == 4) || (addr == 5)) return -EIO;
+                child->thread.arch.debugregs[addr] = data;
+                return 0;
+        }
+        return -EIO;
+}
+
 unsigned long getreg(struct task_struct *child, int regno)
 {
 	unsigned long retval = ~0UL;
@@ -93,6 +112,27 @@ unsigned long getreg(struct task_struct *child, int regno)
 	return retval;
 }
 
+int peek_user(struct task_struct *child, long addr, long data)
+{
+/* read the word at location addr in the USER area. */
+        unsigned long tmp;
+
+        if ((addr & 3) || addr < 0)
+                return -EIO;
+
+        tmp = 0;  /* Default return condition */
+        if(addr < MAX_REG_OFFSET){
+                tmp = getreg(child, addr);
+        }
+        else if((addr >= offsetof(struct user, u_debugreg[0])) &&
+                (addr <= offsetof(struct user, u_debugreg[7]))){
+                addr -= offsetof(struct user, u_debugreg[0]);
+                addr = addr >> 2;
+                tmp = child->thread.arch.debugregs[addr];
+        }
+        return put_user(tmp, (unsigned long *) data);
+}
+
 struct i387_fxsave_struct {
 	unsigned short	cwd;
 	unsigned short	swd;

arch/um/sys-ppc/ptrace.c

@@ -8,6 +8,25 @@ int putreg(struct task_struct *child, unsigned long regno,
 	return 0;
 }
 
+int poke_user(struct task_struct *child, long addr, long data)
+{
+	if ((addr & 3) || addr < 0)
+		return -EIO;
+
+	if (addr < MAX_REG_OFFSET)
+		return putreg(child, addr, data);
+
+	else if((addr >= offsetof(struct user, u_debugreg[0])) &&
+		(addr <= offsetof(struct user, u_debugreg[7]))){
+		  addr -= offsetof(struct user, u_debugreg[0]);
+		  addr = addr >> 2;
+		  if((addr == 4) || (addr == 5)) return -EIO;
+		  child->thread.arch.debugregs[addr] = data;
+		  return 0;
+	}
+	return -EIO;
+}
+
 unsigned long getreg(struct task_struct *child, unsigned long regno)
 {
 	unsigned long retval = ~0UL;
@@ -16,6 +35,27 @@ unsigned long getreg(struct task_struct *child, unsigned long regno)
 	return retval;
 }
 
+int peek_user(struct task_struct *child, long addr, long data)
+{
+	/* read the word at location addr in the USER area. */
+	unsigned long tmp;
+
+	if ((addr & 3) || addr < 0)
+		return -EIO;
+
+	tmp = 0;  /* Default return condition */
+	if(addr < MAX_REG_OFFSET){
+		tmp = getreg(child, addr);
+	}
+	else if((addr >= offsetof(struct user, u_debugreg[0])) &&
+		(addr <= offsetof(struct user, u_debugreg[7]))){
+		addr -= offsetof(struct user, u_debugreg[0]);
+		addr = addr >> 2;
+		tmp = child->thread.arch.debugregs[addr];
+	}
+	return put_user(tmp, (unsigned long *) data);
+}
+
 /*
  * Overrides for Emacs so that we follow Linus's tabbing style.
  * Emacs will notice this stuff at the end of the file and automatically

arch/um/sys-x86_64/Makefile

@@ -14,11 +14,11 @@ obj-$(CONFIG_MODULES) += module.o um_module.o
 
 USER_OBJS := ptrace_user.o sigcontext.o
 
-include arch/um/scripts/Makefile.rules
-
 SYMLINKS = bitops.c csum-copy.S csum-partial.c csum-wrappers.c memcpy.S \
 	semaphore.c thunk.S module.c
 
+include arch/um/scripts/Makefile.rules
+
 bitops.c-dir = lib
 csum-copy.S-dir = lib
 csum-partial.c-dir = lib
@@ -28,6 +28,4 @@ semaphore.c-dir = kernel
 thunk.S-dir = lib
 module.c-dir = kernel
 
-CFLAGS_csum-partial.o := -Dcsum_partial=arch_csum_partial
-
 subdir- := util

arch/um/sys-x86_64/delay.c

@@ -5,40 +5,37 @@
  * Licensed under the GPL
  */
 
-#include "linux/delay.h"
-#include "asm/processor.h"
-#include "asm/param.h"
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <asm/processor.h>
+#include <asm/param.h>
 
 void __delay(unsigned long loops)
 {
 	unsigned long i;
 
-	for(i = 0; i < loops; i++) ;
+        for(i = 0; i < loops; i++)
+                cpu_relax();
 }
 
 void __udelay(unsigned long usecs)
 {
-	int i, n;
+	unsigned long i, n;
 
 	n = (loops_per_jiffy * HZ * usecs) / MILLION;
-	for(i=0;i<n;i++) ;
+        for(i=0;i<n;i++)
+                cpu_relax();
 }
 
+EXPORT_SYMBOL(__udelay);
+
 void __const_udelay(unsigned long usecs)
 {
-	int i, n;
+	unsigned long i, n;
 
 	n = (loops_per_jiffy * HZ * usecs) / MILLION;
-	for(i=0;i<n;i++) ;
+        for(i=0;i<n;i++)
+                cpu_relax();
 }
 
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+EXPORT_SYMBOL(__const_udelay);

arch/um/sys-x86_64/ksyms.c

@@ -16,5 +16,4 @@ EXPORT_SYMBOL(__up_wakeup);
 EXPORT_SYMBOL(__memcpy);
 
 /* Networking helper routines. */
-/*EXPORT_SYMBOL(csum_partial_copy_from);
-EXPORT_SYMBOL(csum_partial_copy_to);*/
+EXPORT_SYMBOL(ip_compute_csum);

arch/um/sys-x86_64/ptrace.c

@@ -5,10 +5,11 @@
  */
 
 #define __FRAME_OFFSETS
-#include "asm/ptrace.h"
-#include "linux/sched.h"
-#include "linux/errno.h"
-#include "asm/elf.h"
+#include <asm/ptrace.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <asm/uaccess.h>
+#include <asm/elf.h>
 
 /* XXX x86_64 */
 unsigned long not_ss;
@@ -62,6 +63,27 @@ int putreg(struct task_struct *child, int regno, unsigned long value)
 	return 0;
 }
 
+int poke_user(struct task_struct *child, long addr, long data)
+{
+        if ((addr & 3) || addr < 0)
+                return -EIO;
+
+        if (addr < MAX_REG_OFFSET)
+                return putreg(child, addr, data);
+
+#if 0 /* Need x86_64 debugregs handling */
+        else if((addr >= offsetof(struct user, u_debugreg[0])) &&
+                (addr <= offsetof(struct user, u_debugreg[7]))){
+                addr -= offsetof(struct user, u_debugreg[0]);
+                addr = addr >> 2;
+                if((addr == 4) || (addr == 5)) return -EIO;
+                child->thread.arch.debugregs[addr] = data;
+                return 0;
+        }
+#endif
+        return -EIO;
+}
+
 unsigned long getreg(struct task_struct *child, int regno)
 {
 	unsigned long retval = ~0UL;
@@ -84,6 +106,29 @@ unsigned long getreg(struct task_struct *child, int regno)
 	return retval;
 }
 
+int peek_user(struct task_struct *child, long addr, long data)
+{
+	/* read the word at location addr in the USER area. */
+        unsigned long tmp;
+
+        if ((addr & 3) || addr < 0)
+                return -EIO;
+
+        tmp = 0;  /* Default return condition */
+        if(addr < MAX_REG_OFFSET){
+                tmp = getreg(child, addr);
+        }
+#if 0 /* Need x86_64 debugregs handling */
+        else if((addr >= offsetof(struct user, u_debugreg[0])) &&
+                (addr <= offsetof(struct user, u_debugreg[7]))){
+                addr -= offsetof(struct user, u_debugreg[0]);
+                addr = addr >> 2;
+                tmp = child->thread.arch.debugregs[addr];
+        }
+#endif
+        return put_user(tmp, (unsigned long *) data);
+}
+
 void arch_switch(void)
 {
 /* XXX

arch/um/sys-x86_64/signal.c

@@ -168,7 +168,7 @@ int setup_signal_stack_si(unsigned long stack_top, int sig,
 
 	frame = (struct rt_sigframe __user *)
 		round_down(stack_top - sizeof(struct rt_sigframe), 16) - 8;
-	frame -= 128;
+	((unsigned char *) frame) -= 128;
 
 	if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
 		goto out;

arch/um/sys-x86_64/syscalls.c

@@ -15,6 +15,7 @@
 #include "asm/unistd.h"
 #include "asm/prctl.h" /* XXX This should get the constants from libc */
 #include "choose-mode.h"
+#include "kern.h"
 
 asmlinkage long sys_uname64(struct new_utsname __user * name)
 {
@@ -44,6 +45,8 @@ long sys_modify_ldt_tt(int func, void *ptr, unsigned long bytecount)
 #ifdef CONFIG_MODE_SKAS
 extern int userspace_pid[];
 
+#include "skas_ptrace.h"
+
 long sys_modify_ldt_skas(int func, void *ptr, unsigned long bytecount)
 {
 	struct ptrace_ldt ldt;

arch/um/sys-x86_64/user-offsets.c

@@ -3,6 +3,14 @@
 #include <signal.h>
 #define __FRAME_OFFSETS
 #include <asm/ptrace.h>
+#include <asm/types.h>
+/* For some reason, x86_64 defines u64 and u32 only in <pci/types.h>, which I
+ * refuse to include here, even though they're used throughout the headers.
+ * These are used in asm/user.h, and that include can't be avoided because of
+ * the sizeof(struct user_regs_struct) below.
+ */
+typedef __u64 u64;
+typedef __u32 u32;
 #include <asm/user.h>
 
 #define DEFINE(sym, val) \

arch/x86_64/Kconfig

@@ -303,6 +303,20 @@ config HPET_TIMER
 	  as it is off-chip.  You can find the HPET spec at
 	  <http://www.intel.com/labs/platcomp/hpet/hpetspec.htm>.
 
+config X86_PM_TIMER
+	bool "PM timer"
+	default y
+	help
+	  Support the ACPI PM timer for time keeping. This is slow,
+	  but is useful on some chipsets without HPET on systems with more
+	  than one CPU. On a single processor or single socket multi core
+	  system it is normally not required.
+	  When the PM timer is active 64bit vsyscalls are disabled
+	  and should not be enabled (/proc/sys/kernel/vsyscall64 should
+	  not be changed).
+	  The kernel selects the PM timer only as a last resort, so it is
+	  useful to enable just in case.
+
 config HPET_EMULATE_RTC
 	bool "Provide RTC interrupt"
 	depends on HPET_TIMER && RTC=y

arch/x86_64/defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-bk7
-# Sat Mar 12 23:43:44 2005
+# Linux kernel version: 2.6.12-rc4
+# Fri May 13 06:39:11 2005
 #
 CONFIG_X86_64=y
 CONFIG_64BIT=y
@@ -11,8 +11,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_X86_CMPXCHG=y
 CONFIG_EARLY_PRINTK=y
-CONFIG_HPET_TIMER=y
-CONFIG_HPET_EMULATE_RTC=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_GENERIC_IOMAP=y
 
@@ -22,6 +20,7 @@ CONFIG_GENERIC_IOMAP=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -33,7 +32,6 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=18
 # CONFIG_HOTPLUG is not set
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
@@ -43,10 +41,11 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
@@ -93,6 +92,9 @@ CONFIG_DISCONTIGMEM=y
 CONFIG_NUMA=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_NR_CPUS=8
+CONFIG_HPET_TIMER=y
+CONFIG_X86_PM_TIMER=y
+CONFIG_HPET_EMULATE_RTC=y
 CONFIG_GART_IOMMU=y
 CONFIG_SWIOTLB=y
 CONFIG_X86_MCE=y
@@ -100,6 +102,7 @@ CONFIG_X86_MCE_INTEL=y
 CONFIG_SECCOMP=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ISA_DMA_API=y
 
 #
 # Power management options
@@ -129,7 +132,7 @@ CONFIG_ACPI_NUMA=y
 # CONFIG_ACPI_IBM is not set
 CONFIG_ACPI_TOSHIBA=y
 CONFIG_ACPI_BLACKLIST_YEAR=2001
-CONFIG_ACPI_DEBUG=y
+# CONFIG_ACPI_DEBUG is not set
 CONFIG_ACPI_BUS=y
 CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
@@ -141,6 +144,7 @@ CONFIG_ACPI_SYSTEM=y
 # CPU Frequency scaling
 #
 CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
@@ -150,7 +154,6 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_TABLE=y
 
 #
 # CPUFreq processor drivers
@@ -164,6 +167,7 @@ CONFIG_X86_ACPI_CPUFREQ=y
 # shared options
 #
 CONFIG_X86_ACPI_CPUFREQ_PROC_INTF=y
+# CONFIG_X86_SPEEDSTEP_LIB is not set
 
 #
 # Bus options (PCI etc.)
@@ -172,19 +176,17 @@ CONFIG_PCI=y
 CONFIG_PCI_DIRECT=y
 CONFIG_PCI_MMCONFIG=y
 CONFIG_UNORDERED_IO=y
+# CONFIG_PCIEPORTBUS is not set
 CONFIG_PCI_MSI=y
 # CONFIG_PCI_LEGACY_PROC is not set
 # CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
 # CONFIG_PCCARD is not set
 
-#
-# PC-card bridges
-#
-
 #
 # PCI Hotplug Support
 #
@@ -254,7 +256,7 @@ CONFIG_LBD=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
@@ -308,7 +310,8 @@ CONFIG_BLK_DEV_AMD74XX=y
 CONFIG_BLK_DEV_PIIX=y
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+CONFIG_BLK_DEV_PDC202XX_NEW=y
+# CONFIG_PDC202XX_FORCE is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIIMAGE is not set
 # CONFIG_BLK_DEV_SIS5513 is not set
@@ -353,7 +356,7 @@ CONFIG_BLK_DEV_SD=y
 #
 # SCSI low-level drivers
 #
-CONFIG_BLK_DEV_3W_XXXX_RAID=y
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AACRAID is not set
@@ -384,7 +387,6 @@ CONFIG_SCSI_SATA_VIA=y
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
@@ -392,7 +394,6 @@ CONFIG_SCSI_SATA_VIA=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA2XXX=y
@@ -401,6 +402,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -437,7 +439,6 @@ CONFIG_NET=y
 #
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
 CONFIG_UNIX=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
@@ -502,7 +503,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
+CONFIG_TUN=y
 
 #
 # ARCnet devices
@@ -525,8 +526,7 @@ CONFIG_MII=y
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
-CONFIG_AMD8111_ETH=y
-# CONFIG_AMD8111E_NAPI is not set
+# CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 CONFIG_FORCEDETH=y
@@ -536,7 +536,7 @@ CONFIG_FORCEDETH=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
-CONFIG_8139CP=m
+CONFIG_8139CP=y
 CONFIG_8139TOO=y
 # CONFIG_8139TOO_PIO is not set
 # CONFIG_8139TOO_TUNE_TWISTER is not set
@@ -671,6 +671,7 @@ CONFIG_SERIAL_8250_NR_UARTS=4
 #
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
@@ -696,6 +697,7 @@ CONFIG_RTC=y
 #
 CONFIG_AGP=y
 CONFIG_AGP_AMD64=y
+CONFIG_AGP_INTEL=y
 # CONFIG_DRM is not set
 # CONFIG_MWAVE is not set
 CONFIG_RAW_DRIVER=y
@@ -703,7 +705,7 @@ CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
 CONFIG_HPET_MMAP=y
 CONFIG_MAX_RAW_DEVS=256
-CONFIG_HANGCHECK_TIMER=y
+# CONFIG_HANGCHECK_TIMER is not set
 
 #
 # TPM devices
@@ -786,6 +788,8 @@ CONFIG_SOUND_ICH=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -797,8 +801,6 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -826,7 +828,6 @@ CONFIG_USB_PRINTER=y
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
 # CONFIG_USB_STORAGE_ISD200 is not set
@@ -965,7 +966,7 @@ CONFIG_AUTOFS_FS=y
 # CD-ROM/DVD Filesystems
 #
 CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
+CONFIG_JOLIET=y
 # CONFIG_ZISOFS is not set
 # CONFIG_UDF_FS is not set
 
@@ -1092,9 +1093,10 @@ CONFIG_OPROFILE=y
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
-# CONFIG_PRINTK_TIME is not set
+CONFIG_LOG_BUF_SHIFT=18
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set

arch/x86_64/kernel/Makefile

@@ -28,6 +28,7 @@ obj-$(CONFIG_GART_IOMMU)	+= pci-gart.o aperture.o
 obj-$(CONFIG_DUMMY_IOMMU)	+= pci-nommu.o pci-dma.o
 obj-$(CONFIG_SWIOTLB)		+= swiotlb.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
+obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer.o
 
 obj-$(CONFIG_MODULES)		+= module.o
 

arch/x86_64/kernel/apic.c

@@ -33,6 +33,7 @@
 #include <asm/mpspec.h>
 #include <asm/pgalloc.h>
 #include <asm/mach_apic.h>
+#include <asm/nmi.h>
 
 int apic_verbosity;
 
@@ -925,7 +926,7 @@ __init int oem_force_hpet_timer(void)
 	unsigned id;
 	DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
 
-	bitmap_empty(clustermap, NUM_APIC_CLUSTERS);
+	bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
 
 	for (i = 0; i < NR_CPUS; i++) {
 		id = bios_cpu_apicid[i];
@@ -1056,7 +1057,7 @@ int __init APIC_init_uniprocessor (void)
 		nr_ioapics = 0;
 #endif
 	setup_boot_APIC_clock();
-
+	check_nmi_watchdog();
 	return 0;
 }
 

arch/x86_64/kernel/entry.S

@@ -220,13 +220,18 @@ sysret_careful:
 	jmp sysret_check
 
 	/* Handle a signal */ 
-	/* edx:	work flags (arg3) */
 sysret_signal:
 	sti
+	testl $(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SINGLESTEP),%edx
+	jz    1f
+
+	/* Really a signal */
+	/* edx:	work flags (arg3) */
 	leaq do_notify_resume(%rip),%rax
 	leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
 	xorl %esi,%esi # oldset -> arg2
 	call ptregscall_common
+1:	movl $_TIF_NEED_RESCHED,%edi
 	jmp sysret_check
 	
 	/* Do syscall tracing */
@@ -484,6 +489,8 @@ retint_careful:
 	jmp retint_check
 	
 retint_signal:
+	testl $(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SINGLESTEP),%edx
+	jz    retint_swapgs
 	sti
 	SAVE_REST
 	movq $-1,ORIG_RAX(%rsp) 			
@@ -492,8 +499,8 @@ retint_signal:
 	call do_notify_resume
 	RESTORE_REST
 	cli
+	movl $_TIF_NEED_RESCHED,%edi
 	GET_THREAD_INFO(%rcx)
-	movl $_TIF_WORK_MASK,%edi
 	jmp retint_check
 
 #ifdef CONFIG_PREEMPT