arm/gpio: Remove three copies of broken and racy debug code

gpiolib plus two gpio implementations in arm fiddle in the guts of
irq_desc in a racy and buggy way. Remove the stuff. I already told the
gpio folks that we can provide that information in a proper way if
necessary.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
LKML-Reference: <20110324212508.931638262@linutronix.de>

arch/arm/mach-ep93xx/gpio.c

@@ -366,45 +366,6 @@ static void ep93xx_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 				gpiochip_is_requested(chip, i) ? : "",
 				is_out ? "out" : "in ",
 				(data_reg & (1 << i)) ? "hi" : "lo");
-
-		if (!is_out) {
-			int irq = gpio_to_irq(gpio);
-			struct irq_desc *desc = irq_desc + irq;
-
-			if (irq >= 0 && desc->action) {
-				char *trigger;
-
-				switch (desc->status & IRQ_TYPE_SENSE_MASK) {
-				case IRQ_TYPE_NONE:
-					trigger = "(default)";
-					break;
-				case IRQ_TYPE_EDGE_FALLING:
-					trigger = "edge-falling";
-					break;
-				case IRQ_TYPE_EDGE_RISING:
-					trigger = "edge-rising";
-					break;
-				case IRQ_TYPE_EDGE_BOTH:
-					trigger = "edge-both";
-					break;
-				case IRQ_TYPE_LEVEL_HIGH:
-					trigger = "level-high";
-					break;
-				case IRQ_TYPE_LEVEL_LOW:
-					trigger = "level-low";
-					break;
-				default:
-					trigger = "?trigger?";
-					break;
-				}
-
-				seq_printf(s, " irq-%d %s%s",
-						irq, trigger,
-						(desc->status & IRQ_WAKEUP)
-							? " wakeup" : "");
-			}
-		}
-
 		seq_printf(s, "\n");
 	}
 }

arch/arm/plat-nomadik/gpio.c

@@ -832,51 +832,6 @@ static void nmk_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 				: "?  ",
 			(mode < 0) ? "unknown" : modes[mode],
 			pull ? "pull" : "none");
-
-		if (!is_out) {
-			int		irq = gpio_to_irq(gpio);
-			struct irq_desc	*desc = irq_to_desc(irq);
-
-			/* This races with request_irq(), set_irq_type(),
-			 * and set_irq_wake() ... but those are "rare".
-			 *
-			 * More significantly, trigger type flags aren't
-			 * currently maintained by genirq.
-			 */
-			if (irq >= 0 && desc->action) {
-				char *trigger;
-
-				switch (desc->status & IRQ_TYPE_SENSE_MASK) {
-				case IRQ_TYPE_NONE:
-					trigger = "(default)";
-					break;
-				case IRQ_TYPE_EDGE_FALLING:
-					trigger = "edge-falling";
-					break;
-				case IRQ_TYPE_EDGE_RISING:
-					trigger = "edge-rising";
-					break;
-				case IRQ_TYPE_EDGE_BOTH:
-					trigger = "edge-both";
-					break;
-				case IRQ_TYPE_LEVEL_HIGH:
-					trigger = "level-high";
-					break;
-				case IRQ_TYPE_LEVEL_LOW:
-					trigger = "level-low";
-					break;
-				default:
-					trigger = "?trigger?";
-					break;
-				}
-
-				seq_printf(s, " irq-%d %s%s",
-					irq, trigger,
-					(desc->status & IRQ_WAKEUP)
-						? " wakeup" : "");
-			}
-		}
-
 		seq_printf(s, "\n");
 	}
 }

drivers/gpio/gpiolib.c

@@ -1656,51 +1656,6 @@ static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
 			chip->get
 				? (chip->get(chip, i) ? "hi" : "lo")
 				: "?  ");
-
-		if (!is_out) {
-			int		irq = gpio_to_irq(gpio);
-			struct irq_desc	*desc = irq_to_desc(irq);
-
-			/* This races with request_irq(), set_irq_type(),
-			 * and set_irq_wake() ... but those are "rare".
-			 *
-			 * More significantly, trigger type flags aren't
-			 * currently maintained by genirq.
-			 */
-			if (irq >= 0 && desc->action) {
-				char *trigger;
-
-				switch (desc->status & IRQ_TYPE_SENSE_MASK) {
-				case IRQ_TYPE_NONE:
-					trigger = "(default)";
-					break;
-				case IRQ_TYPE_EDGE_FALLING:
-					trigger = "edge-falling";
-					break;
-				case IRQ_TYPE_EDGE_RISING:
-					trigger = "edge-rising";
-					break;
-				case IRQ_TYPE_EDGE_BOTH:
-					trigger = "edge-both";
-					break;
-				case IRQ_TYPE_LEVEL_HIGH:
-					trigger = "level-high";
-					break;
-				case IRQ_TYPE_LEVEL_LOW:
-					trigger = "level-low";
-					break;
-				default:
-					trigger = "?trigger?";
-					break;
-				}
-
-				seq_printf(s, " irq-%d %s%s",
-					irq, trigger,
-					(desc->status & IRQ_WAKEUP)
-						? " wakeup" : "");
-			}
-		}
-
 		seq_printf(s, "\n");
 	}
 }