|
@@ -688,17 +688,28 @@ out:
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
|
-static void wl12xx_top_reg_write(struct wl1271 *wl, int addr, u16 val)
|
|
|
+static int wl12xx_top_reg_write(struct wl1271 *wl, int addr, u16 val)
|
|
|
{
|
|
|
+ int ret;
|
|
|
+
|
|
|
/* write address >> 1 + 0x30000 to OCP_POR_CTR */
|
|
|
addr = (addr >> 1) + 0x30000;
|
|
|
- wl1271_write32(wl, WL12XX_OCP_POR_CTR, addr);
|
|
|
+ ret = wlcore_write32(wl, WL12XX_OCP_POR_CTR, addr);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
|
|
|
/* write value to OCP_POR_WDATA */
|
|
|
- wl1271_write32(wl, WL12XX_OCP_DATA_WRITE, val);
|
|
|
+ ret = wlcore_write32(wl, WL12XX_OCP_DATA_WRITE, val);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
|
|
|
/* write 1 to OCP_CMD */
|
|
|
- wl1271_write32(wl, WL12XX_OCP_CMD, OCP_CMD_WRITE);
|
|
|
+ ret = wlcore_write32(wl, WL12XX_OCP_CMD, OCP_CMD_WRITE);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
+
|
|
|
+out:
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
static int wl12xx_top_reg_read(struct wl1271 *wl, int addr, u16 *out)
|
|
@@ -709,10 +720,14 @@ static int wl12xx_top_reg_read(struct wl1271 *wl, int addr, u16 *out)
|
|
|
|
|
|
/* write address >> 1 + 0x30000 to OCP_POR_CTR */
|
|
|
addr = (addr >> 1) + 0x30000;
|
|
|
- wl1271_write32(wl, WL12XX_OCP_POR_CTR, addr);
|
|
|
+ ret = wlcore_write32(wl, WL12XX_OCP_POR_CTR, addr);
|
|
|
+ if (ret < 0)
|
|
|
+ return ret;
|
|
|
|
|
|
/* write 2 to OCP_CMD */
|
|
|
- wl1271_write32(wl, WL12XX_OCP_CMD, OCP_CMD_READ);
|
|
|
+ ret = wlcore_write32(wl, WL12XX_OCP_CMD, OCP_CMD_READ);
|
|
|
+ if (ret < 0)
|
|
|
+ return ret;
|
|
|
|
|
|
/* poll for data ready */
|
|
|
do {
|
|
@@ -751,11 +766,15 @@ static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
|
|
|
if (spare_reg == 0xFFFF)
|
|
|
return -EFAULT;
|
|
|
spare_reg |= (BIT(3) | BIT(5) | BIT(6));
|
|
|
- wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
|
|
|
+ ret = wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
|
|
|
+ if (ret < 0)
|
|
|
+ return ret;
|
|
|
|
|
|
/* Enable FREF_CLK_REQ & mux MCS and coex PLLs to FREF */
|
|
|
- wl12xx_top_reg_write(wl, SYS_CLK_CFG_REG,
|
|
|
- WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
|
|
|
+ ret = wl12xx_top_reg_write(wl, SYS_CLK_CFG_REG,
|
|
|
+ WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
|
|
|
+ if (ret < 0)
|
|
|
+ return ret;
|
|
|
|
|
|
/* Delay execution for 15msec, to let the HW settle */
|
|
|
mdelay(15);
|
|
@@ -795,11 +814,21 @@ static bool wl128x_is_fref_valid(struct wl1271 *wl)
|
|
|
|
|
|
static int wl128x_manually_configure_mcs_pll(struct wl1271 *wl)
|
|
|
{
|
|
|
- wl12xx_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
|
|
|
- wl12xx_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
|
|
|
- wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, MCS_PLL_CONFIG_REG_VAL);
|
|
|
+ int ret;
|
|
|
|
|
|
- return 0;
|
|
|
+ ret = wl12xx_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
+
|
|
|
+ ret = wl12xx_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
+
|
|
|
+ ret = wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG,
|
|
|
+ MCS_PLL_CONFIG_REG_VAL);
|
|
|
+
|
|
|
+out:
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
|
|
@@ -818,7 +847,9 @@ static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
|
|
|
if (spare_reg == 0xFFFF)
|
|
|
return -EFAULT;
|
|
|
spare_reg |= BIT(2);
|
|
|
- wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
|
|
|
+ ret = wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg);
|
|
|
+ if (ret < 0)
|
|
|
+ return ret;
|
|
|
|
|
|
/* Handle special cases of the TCXO clock */
|
|
|
if (priv->tcxo_clock == WL12XX_TCXOCLOCK_16_8 ||
|
|
@@ -836,9 +867,9 @@ static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
|
|
|
return -EFAULT;
|
|
|
pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT);
|
|
|
pll_config |= MCS_PLL_ENABLE_HP;
|
|
|
- wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config);
|
|
|
+ ret = wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config);
|
|
|
|
|
|
- return 0;
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
/*
|
|
@@ -927,7 +958,9 @@ static int wl127x_boot_clk(struct wl1271 *wl)
|
|
|
goto out;
|
|
|
|
|
|
val &= FREF_CLK_TYPE_BITS;
|
|
|
- wl12xx_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
|
|
|
+ ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
|
|
|
/* Set clock pull mode (no pull) */
|
|
|
ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_PULL, &val);
|
|
@@ -935,7 +968,9 @@ static int wl127x_boot_clk(struct wl1271 *wl)
|
|
|
goto out;
|
|
|
|
|
|
val |= NO_PULL;
|
|
|
- wl12xx_top_reg_write(wl, OCP_REG_CLK_PULL, val);
|
|
|
+ ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_PULL, val);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
} else {
|
|
|
u16 val;
|
|
|
/* Set clock polarity */
|
|
@@ -945,10 +980,14 @@ static int wl127x_boot_clk(struct wl1271 *wl)
|
|
|
|
|
|
val &= FREF_CLK_POLARITY_BITS;
|
|
|
val |= CLK_REQ_OUTN_SEL;
|
|
|
- wl12xx_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
|
|
|
+ ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
}
|
|
|
|
|
|
- wl1271_write32(wl, WL12XX_PLL_PARAMETERS, clk);
|
|
|
+ ret = wlcore_write32(wl, WL12XX_PLL_PARAMETERS, clk);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
|
|
|
ret = wlcore_read32(wl, WL12XX_PLL_PARAMETERS, &pause);
|
|
|
if (ret < 0)
|
|
@@ -958,7 +997,7 @@ static int wl127x_boot_clk(struct wl1271 *wl)
|
|
|
|
|
|
pause &= ~(WU_COUNTER_PAUSE_VAL);
|
|
|
pause |= WU_COUNTER_PAUSE_VAL;
|
|
|
- wl1271_write32(wl, WL12XX_WU_COUNTER_PAUSE, pause);
|
|
|
+ ret = wlcore_write32(wl, WL12XX_WU_COUNTER_PAUSE, pause);
|
|
|
|
|
|
out:
|
|
|
return ret;
|
|
@@ -971,7 +1010,9 @@ static int wl1271_boot_soft_reset(struct wl1271 *wl)
|
|
|
int ret = 0;
|
|
|
|
|
|
/* perform soft reset */
|
|
|
- wl1271_write32(wl, WL12XX_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
|
|
|
+ ret = wlcore_write32(wl, WL12XX_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
|
|
|
/* SOFT_RESET is self clearing */
|
|
|
timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
|
|
@@ -995,10 +1036,12 @@ static int wl1271_boot_soft_reset(struct wl1271 *wl)
|
|
|
}
|
|
|
|
|
|
/* disable Rx/Tx */
|
|
|
- wl1271_write32(wl, WL12XX_ENABLE, 0x0);
|
|
|
+ ret = wlcore_write32(wl, WL12XX_ENABLE, 0x0);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
|
|
|
/* disable auto calibration on start*/
|
|
|
- wl1271_write32(wl, WL12XX_SPARE_A2, 0xffff);
|
|
|
+ ret = wlcore_write32(wl, WL12XX_SPARE_A2, 0xffff);
|
|
|
|
|
|
out:
|
|
|
return ret;
|
|
@@ -1022,10 +1065,15 @@ static int wl12xx_pre_boot(struct wl1271 *wl)
|
|
|
}
|
|
|
|
|
|
/* Continue the ELP wake up sequence */
|
|
|
- wl1271_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
|
|
|
+ ret = wlcore_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
+
|
|
|
udelay(500);
|
|
|
|
|
|
- wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
|
|
|
+ ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
|
|
|
/* Read-modify-write DRPW_SCRATCH_START register (see next state)
|
|
|
to be used by DRPw FW. The RTRIM value will be added by the FW
|
|
@@ -1042,12 +1090,18 @@ static int wl12xx_pre_boot(struct wl1271 *wl)
|
|
|
else
|
|
|
clk |= (priv->ref_clock << 1) << 4;
|
|
|
|
|
|
- wl1271_write32(wl, WL12XX_DRPW_SCRATCH_START, clk);
|
|
|
+ ret = wlcore_write32(wl, WL12XX_DRPW_SCRATCH_START, clk);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
|
|
|
- wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
|
|
|
+ ret = wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
|
|
|
/* Disable interrupts */
|
|
|
- wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
|
|
|
+ ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
|
|
|
ret = wl1271_boot_soft_reset(wl);
|
|
|
if (ret < 0)
|
|
@@ -1067,7 +1121,9 @@ static int wl12xx_pre_upload(struct wl1271 *wl)
|
|
|
* ACX_EEPROMLESS_IND_REG */
|
|
|
wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG");
|
|
|
|
|
|
- wl1271_write32(wl, WL12XX_EEPROMLESS_IND, WL12XX_EEPROMLESS_IND);
|
|
|
+ ret = wlcore_write32(wl, WL12XX_EEPROMLESS_IND, WL12XX_EEPROMLESS_IND);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
|
|
|
ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &tmp);
|
|
|
if (ret < 0)
|
|
@@ -1083,8 +1139,11 @@ static int wl12xx_pre_upload(struct wl1271 *wl)
|
|
|
/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
|
|
|
* to upload_fw) */
|
|
|
|
|
|
- if (wl->chip.id == CHIP_ID_1283_PG20)
|
|
|
- wl12xx_top_reg_write(wl, SDIO_IO_DS, HCI_IO_DS_6MA);
|
|
|
+ if (wl->chip.id == CHIP_ID_1283_PG20) {
|
|
|
+ ret = wl12xx_top_reg_write(wl, SDIO_IO_DS, HCI_IO_DS_6MA);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
+ }
|
|
|
|
|
|
/* polarity must be set before the firmware is loaded */
|
|
|
ret = wl12xx_top_reg_read(wl, OCP_REG_POLARITY, &polarity);
|
|
@@ -1093,21 +1152,31 @@ static int wl12xx_pre_upload(struct wl1271 *wl)
|
|
|
|
|
|
/* We use HIGH polarity, so unset the LOW bit */
|
|
|
polarity &= ~POLARITY_LOW;
|
|
|
- wl12xx_top_reg_write(wl, OCP_REG_POLARITY, polarity);
|
|
|
+ ret = wl12xx_top_reg_write(wl, OCP_REG_POLARITY, polarity);
|
|
|
|
|
|
out:
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
|
-static void wl12xx_enable_interrupts(struct wl1271 *wl)
|
|
|
+static int wl12xx_enable_interrupts(struct wl1271 *wl)
|
|
|
{
|
|
|
- wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL12XX_ACX_ALL_EVENTS_VECTOR);
|
|
|
+ int ret;
|
|
|
+
|
|
|
+ ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK,
|
|
|
+ WL12XX_ACX_ALL_EVENTS_VECTOR);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
|
|
|
wlcore_enable_interrupts(wl);
|
|
|
- wlcore_write_reg(wl, REG_INTERRUPT_MASK,
|
|
|
- WL1271_ACX_INTR_ALL & ~(WL12XX_INTR_MASK));
|
|
|
+ ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK,
|
|
|
+ WL1271_ACX_INTR_ALL & ~(WL12XX_INTR_MASK));
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
+
|
|
|
+ ret = wlcore_write32(wl, WL12XX_HI_CFG, HI_CFG_DEF_VAL);
|
|
|
|
|
|
- wl1271_write32(wl, WL12XX_HI_CFG, HI_CFG_DEF_VAL);
|
|
|
+out:
|
|
|
+ return ret;
|
|
|
}
|
|
|
|
|
|
static int wl12xx_boot(struct wl1271 *wl)
|
|
@@ -1134,7 +1203,7 @@ static int wl12xx_boot(struct wl1271 *wl)
|
|
|
if (ret < 0)
|
|
|
goto out;
|
|
|
|
|
|
- wl12xx_enable_interrupts(wl);
|
|
|
+ ret = wl12xx_enable_interrupts(wl);
|
|
|
|
|
|
out:
|
|
|
return ret;
|
|
@@ -1149,14 +1218,15 @@ static int wl12xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr,
|
|
|
if (ret < 0)
|
|
|
return ret;
|
|
|
|
|
|
- wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_CMD);
|
|
|
+ ret = wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_CMD);
|
|
|
|
|
|
return ret;
|
|
|
}
|
|
|
|
|
|
-static void wl12xx_ack_event(struct wl1271 *wl)
|
|
|
+static int wl12xx_ack_event(struct wl1271 *wl)
|
|
|
{
|
|
|
- wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_EVENT_ACK);
|
|
|
+ return wlcore_write_reg(wl, REG_INTERRUPT_TRIG,
|
|
|
+ WL12XX_INTR_TRIG_EVENT_ACK);
|
|
|
}
|
|
|
|
|
|
static u32 wl12xx_calc_tx_blocks(struct wl1271 *wl, u32 len, u32 spare_blks)
|
|
@@ -1348,7 +1418,9 @@ static int wl12xx_get_fuse_mac(struct wl1271 *wl)
|
|
|
u32 mac1, mac2;
|
|
|
int ret;
|
|
|
|
|
|
- wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
|
|
|
+ ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]);
|
|
|
+ if (ret < 0)
|
|
|
+ goto out;
|
|
|
|
|
|
ret = wlcore_read32(wl, WL12XX_REG_FUSE_BD_ADDR_1, &mac1);
|
|
|
if (ret < 0)
|
|
@@ -1363,7 +1435,7 @@ static int wl12xx_get_fuse_mac(struct wl1271 *wl)
|
|
|
((mac1 & 0xff000000) >> 24);
|
|
|
wl->fuse_nic_addr = mac1 & 0xffffff;
|
|
|
|
|
|
- wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
|
|
|
+ ret = wlcore_set_partition(wl, &wl->ptable[PART_DOWN]);
|
|
|
|
|
|
out:
|
|
|
return ret;
|