brcmfmac: remove SDIO_REQ_ASYNC flag

Remove SDIO_REQ_ASYNC from brcmfmac since it is not being used.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c

@@ -453,15 +453,11 @@ static int brcmf_sdio_buffrw(struct brcmf_sdio_dev *sdiodev, uint fn,
 }
 
 static int brcmf_sdcard_recv_prepare(struct brcmf_sdio_dev *sdiodev, uint fn,
-				     uint flags, uint width, u32 *addr)
+				     uint width, u32 *addr)
 {
 	uint bar0 = *addr & ~SBSDIO_SB_OFT_ADDR_MASK;
 	int err = 0;
 
-	/* Async not implemented yet */
-	if (flags & SDIO_REQ_ASYNC)
-		return -ENOTSUPP;
-
 	if (bar0 != sdiodev->sbwad) {
 		err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0);
 		if (err)
@@ -512,7 +508,7 @@ brcmf_sdcard_recv_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 		  fn, addr, pkt->len);
 
 	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
-	err = brcmf_sdcard_recv_prepare(sdiodev, fn, flags, width, &addr);
+	err = brcmf_sdcard_recv_prepare(sdiodev, fn, width, &addr);
 	if (err)
 		goto done;
 
@@ -536,7 +532,7 @@ int brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 		  fn, addr, pktq->qlen);
 
 	width = (flags & SDIO_REQ_4BYTE) ? 4 : 2;
-	err = brcmf_sdcard_recv_prepare(sdiodev, fn, flags, width, &addr);
+	err = brcmf_sdcard_recv_prepare(sdiodev, fn, width, &addr);
 	if (err)
 		goto done;
 
@@ -581,10 +577,6 @@ brcmf_sdcard_send_pkt(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 	brcmf_dbg(SDIO, "fun = %d, addr = 0x%x, size = %d\n",
 		  fn, addr, pkt->len);
 
-	/* Async not implemented yet */
-	if (flags & SDIO_REQ_ASYNC)
-		return -ENOTSUPP;
-
 	if (bar0 != sdiodev->sbwad) {
 		err = brcmf_sdcard_set_sbaddr_window(sdiodev, bar0);
 		if (err)

drivers/net/wireless/brcm80211/brcmfmac/sdio_host.h

@@ -229,8 +229,6 @@ brcmf_sdcard_recv_chain(struct brcmf_sdio_dev *sdiodev, u32 addr, uint fn,
 #define SDIO_REQ_4BYTE	0x1
 /* Fixed address (FIFO) (vs. incrementing address) */
 #define SDIO_REQ_FIXED	0x2
-/* Async request (vs. sync request) */
-#define SDIO_REQ_ASYNC	0x4
 
 /* Read/write to memory block (F1, no FIFO) via CMD53 (sync only).
  *   rw:       read or write (0/1)