MMC core learns about SPI

Teach the MMC/SD/SDIO core about using SPI mode.

 - Use mmc_host_is_spi() so enumeration works through SPI signaling
   and protocols, not just the native versions.

 - Provide the SPI response type flags with each request issued,
   including requests from the new lock/unlock code.

 - Understand that cmd->resp[0] and mmc_get_status() results for SPI
   return different values than for "native" MMC/SD protocol; this
   affects resetting, checking card lock status, and some others.

 - Understand that some commands act a bit differently ... notably:
     * OP_COND command doesn't return the OCR
     * APP_CMD status doesn't have an R1_APP_CMD analogue

Those changes required some new and updated primitives:

 - Provide utilities to access two SPI-only requests, and one
   request that wasn't previously needed:
     * mmc_spi_read_ocr() ... SPI only
     * mmc_spi_set_crc() ... SPI only (override by module parm)
     * mmc_send_cid() ... for use without broadcast mode

 - Updated internal routines:
     * Previous mmc_send_csd() modified into mmc_send_cxd_native();
       it uses native "R2" responses, which include 16 bytes of data.
     * Previous mmc_send_ext_csd() becomes new mmc_send_cxd_data()
       helper for command-and-data access
     * Bugfix to that mmc_send_cxd_data() code:  dma-to-stack is
       unsafe/nonportable, so kmalloc a bounce buffer instead.

 - Modified mmc_send_ext_csd() now uses mmc_send_cxd_data() helper

 - Modified mmc_send_csd(), and new mmc_spi_send_cid(), routines use
   those helper routines based on whether they're native or SPI

The newest categories of cards supported by the MMC stack aren't expected
to work yet with SPI:  MMC or SD cards with over 4GB data, and SDIO.
All those cards support SPI mode, so eventually they should work too.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

drivers/mmc/core/bus.c

@@ -243,10 +243,17 @@ int mmc_add_card(struct mmc_card *card)
 		break;
 	}
 
-	printk(KERN_INFO "%s: new %s%s card at address %04x\n",
-		mmc_hostname(card->host),
-		mmc_card_highspeed(card) ? "high speed " : "",
-		type, card->rca);
+	if (mmc_host_is_spi(card->host)) {
+		printk(KERN_INFO "%s: new %s%s card on SPI\n",
+			mmc_hostname(card->host),
+			mmc_card_highspeed(card) ? "high speed " : "",
+			type);
+	} else {
+		printk(KERN_INFO "%s: new %s%s card at address %04x\n",
+			mmc_hostname(card->host),
+			mmc_card_highspeed(card) ? "high speed " : "",
+			type, card->rca);
+	}
 
 	card->dev.uevent_suppress = 1;
 
@@ -278,8 +285,13 @@ int mmc_add_card(struct mmc_card *card)
 void mmc_remove_card(struct mmc_card *card)
 {
 	if (mmc_card_present(card)) {
-		printk(KERN_INFO "%s: card %04x removed\n",
-			mmc_hostname(card->host), card->rca);
+		if (mmc_host_is_spi(card->host)) {
+			printk(KERN_INFO "%s: SPI card removed\n",
+				mmc_hostname(card->host));
+		} else {
+			printk(KERN_INFO "%s: card %04x removed\n",
+				mmc_hostname(card->host), card->rca);
+		}
 
 		if (card->host->bus_ops->sysfs_remove)
 			card->host->bus_ops->sysfs_remove(card->host, card);

drivers/mmc/core/core.c

@@ -41,6 +41,14 @@ extern int mmc_attach_sdio(struct mmc_host *host, u32 ocr);
 
 static struct workqueue_struct *workqueue;
 
+/*
+ * Enabling software CRCs on the data blocks can be a significant (30%)
+ * performance cost, and for other reasons may not always be desired.
+ * So we allow it it to be disabled.
+ */
+int use_spi_crc = 1;
+module_param(use_spi_crc, bool, 0);
+
 /*
  * Internal function. Schedule delayed work in the MMC work queue.
  */
@@ -71,6 +79,11 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
 	struct mmc_command *cmd = mrq->cmd;
 	int err = cmd->error;
 
+	if (err && cmd->retries && mmc_host_is_spi(host)) {
+		if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
+			cmd->retries = 0;
+	}
+
 	if (err && cmd->retries) {
 		pr_debug("%s: req failed (CMD%u): %d, retrying...\n",
 			mmc_hostname(host), cmd->opcode, err);
@@ -453,8 +466,13 @@ static void mmc_power_up(struct mmc_host *host)
 	int bit = fls(host->ocr_avail) - 1;
 
 	host->ios.vdd = bit;
-	host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
-	host->ios.chip_select = MMC_CS_DONTCARE;
+	if (mmc_host_is_spi(host)) {
+		host->ios.chip_select = MMC_CS_HIGH;
+		host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
+	} else {
+		host->ios.chip_select = MMC_CS_DONTCARE;
+		host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
+	}
 	host->ios.power_mode = MMC_POWER_UP;
 	host->ios.bus_width = MMC_BUS_WIDTH_1;
 	host->ios.timing = MMC_TIMING_LEGACY;
@@ -481,8 +499,10 @@ static void mmc_power_off(struct mmc_host *host)
 {
 	host->ios.clock = 0;
 	host->ios.vdd = 0;
-	host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
-	host->ios.chip_select = MMC_CS_DONTCARE;
+	if (!mmc_host_is_spi(host)) {
+		host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
+		host->ios.chip_select = MMC_CS_DONTCARE;
+	}
 	host->ios.power_mode = MMC_POWER_OFF;
 	host->ios.bus_width = MMC_BUS_WIDTH_1;
 	host->ios.timing = MMC_TIMING_LEGACY;

drivers/mmc/core/core.h

@@ -48,5 +48,7 @@ void mmc_rescan(struct work_struct *work);
 void mmc_start_host(struct mmc_host *host);
 void mmc_stop_host(struct mmc_host *host);
 
+extern int use_spi_crc;
+
 #endif
 

drivers/mmc/core/mmc.c

@@ -165,8 +165,6 @@ static int mmc_read_ext_csd(struct mmc_card *card)
 
 	BUG_ON(!card);
 
-	err = -EIO;
-
 	if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
 		return 0;
 
@@ -279,10 +277,22 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	if (err)
 		goto err;
 
+	/*
+	 * For SPI, enable CRC as appropriate.
+	 */
+	if (mmc_host_is_spi(host)) {
+		err = mmc_spi_set_crc(host, use_spi_crc);
+		if (err)
+			goto err;
+	}
+
 	/*
 	 * Fetch CID from card.
 	 */
-	err = mmc_all_send_cid(host, cid);
+	if (mmc_host_is_spi(host))
+		err = mmc_send_cid(host, cid);
+	else
+		err = mmc_all_send_cid(host, cid);
 	if (err)
 		goto err;
 
@@ -309,13 +319,15 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	}
 
 	/*
-	 * Set card RCA.
+	 * For native busses:  set card RCA and quit open drain mode.
 	 */
-	err = mmc_set_relative_addr(card);
-	if (err)
-		goto free_card;
+	if (!mmc_host_is_spi(host)) {
+		err = mmc_set_relative_addr(card);
+		if (err)
+			goto free_card;
 
-	mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
+		mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
+	}
 
 	if (!oldcard) {
 		/*
@@ -336,13 +348,15 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 	/*
 	 * Select card, as all following commands rely on that.
 	 */
-	err = mmc_select_card(card);
-	if (err)
-		goto free_card;
+	if (!mmc_host_is_spi(host)) {
+		err = mmc_select_card(card);
+		if (err)
+			goto free_card;
+	}
 
 	if (!oldcard) {
 		/*
-		 * Fetch and process extened CSD.
+		 * Fetch and process extended CSD.
 		 */
 		err = mmc_read_ext_csd(card);
 		if (err)
@@ -502,7 +516,8 @@ static void mmc_suspend(struct mmc_host *host)
 	BUG_ON(!host->card);
 
 	mmc_claim_host(host);
-	mmc_deselect_cards(host);
+	if (!mmc_host_is_spi(host))
+		mmc_deselect_cards(host);
 	host->card->state &= ~MMC_STATE_HIGHSPEED;
 	mmc_release_host(host);
 }
@@ -562,6 +577,15 @@ int mmc_attach_mmc(struct mmc_host *host, u32 ocr)
 
 	mmc_attach_bus(host, &mmc_ops);
 
+	/*
+	 * We need to get OCR a different way for SPI.
+	 */
+	if (mmc_host_is_spi(host)) {
+		err = mmc_spi_read_ocr(host, 1, &ocr);
+		if (err)
+			goto err;
+	}
+
 	/*
 	 * Sanity check the voltages that the card claims to
 	 * support.

drivers/mmc/core/mmc_ops.c

@@ -63,23 +63,36 @@ int mmc_go_idle(struct mmc_host *host)
 	int err;
 	struct mmc_command cmd;
 
-	mmc_set_chip_select(host, MMC_CS_HIGH);
-
-	mmc_delay(1);
+	/*
+	 * Non-SPI hosts need to prevent chipselect going active during
+	 * GO_IDLE; that would put chips into SPI mode.  Remind them of
+	 * that in case of hardware that won't pull up DAT3/nCS otherwise.
+	 *
+	 * SPI hosts ignore ios.chip_select; it's managed according to
+	 * rules that must accomodate non-MMC slaves which this layer
+	 * won't even know about.
+	 */
+	if (!mmc_host_is_spi(host)) {
+		mmc_set_chip_select(host, MMC_CS_HIGH);
+		mmc_delay(1);
+	}
 
 	memset(&cmd, 0, sizeof(struct mmc_command));
 
 	cmd.opcode = MMC_GO_IDLE_STATE;
 	cmd.arg = 0;
-	cmd.flags = MMC_RSP_NONE | MMC_CMD_BC;
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;
 
 	err = mmc_wait_for_cmd(host, &cmd, 0);
 
 	mmc_delay(1);
 
-	mmc_set_chip_select(host, MMC_CS_DONTCARE);
+	if (!mmc_host_is_spi(host)) {
+		mmc_set_chip_select(host, MMC_CS_DONTCARE);
+		mmc_delay(1);
+	}
 
-	mmc_delay(1);
+	host->use_spi_crc = 0;
 
 	return err;
 }
@@ -94,23 +107,33 @@ int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 	memset(&cmd, 0, sizeof(struct mmc_command));
 
 	cmd.opcode = MMC_SEND_OP_COND;
-	cmd.arg = ocr;
-	cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
+	cmd.arg = mmc_host_is_spi(host) ? 0 : ocr;
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
 
 	for (i = 100; i; i--) {
 		err = mmc_wait_for_cmd(host, &cmd, 0);
 		if (err)
 			break;
 
-		if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0)
+		/* if we're just probing, do a single pass */
+		if (ocr == 0)
 			break;
 
+		/* otherwise wait until reset completes */
+		if (mmc_host_is_spi(host)) {
+			if (!(cmd.resp[0] & R1_SPI_IDLE))
+				break;
+		} else {
+			if (cmd.resp[0] & MMC_CARD_BUSY)
+				break;
+		}
+
 		err = -ETIMEDOUT;
 
 		mmc_delay(10);
 	}
 
-	if (rocr)
+	if (rocr && !mmc_host_is_spi(host))
 		*rocr = cmd.resp[0];
 
 	return err;
@@ -160,40 +183,46 @@ int mmc_set_relative_addr(struct mmc_card *card)
 	return 0;
 }
 
-int mmc_send_csd(struct mmc_card *card, u32 *csd)
+static int
+mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode)
 {
 	int err;
 	struct mmc_command cmd;
 
-	BUG_ON(!card);
-	BUG_ON(!card->host);
-	BUG_ON(!csd);
+	BUG_ON(!host);
+	BUG_ON(!cxd);
 
 	memset(&cmd, 0, sizeof(struct mmc_command));
 
-	cmd.opcode = MMC_SEND_CSD;
-	cmd.arg = card->rca << 16;
+	cmd.opcode = opcode;
+	cmd.arg = arg;
 	cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;
 
-	err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
+	err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
 	if (err)
 		return err;
 
-	memcpy(csd, cmd.resp, sizeof(u32) * 4);
+	memcpy(cxd, cmd.resp, sizeof(u32) * 4);
 
 	return 0;
 }
 
-int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
+static int
+mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host,
+		u32 opcode, void *buf, unsigned len)
 {
 	struct mmc_request mrq;
 	struct mmc_command cmd;
 	struct mmc_data data;
 	struct scatterlist sg;
+	void *data_buf;
 
-	BUG_ON(!card);
-	BUG_ON(!card->host);
-	BUG_ON(!ext_csd);
+	/* dma onto stack is unsafe/nonportable, but callers to this
+	 * routine normally provide temporary on-stack buffers ...
+	 */
+	data_buf = kmalloc(len, GFP_KERNEL);
+	if (data_buf == NULL)
+		return -ENOMEM;
 
 	memset(&mrq, 0, sizeof(struct mmc_request));
 	memset(&cmd, 0, sizeof(struct mmc_command));
@@ -202,21 +231,31 @@ int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
 	mrq.cmd = &cmd;
 	mrq.data = &data;
 
-	cmd.opcode = MMC_SEND_EXT_CSD;
+	cmd.opcode = opcode;
 	cmd.arg = 0;
-	cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
 
-	data.blksz = 512;
+	/* NOTE HACK:  the MMC_RSP_SPI_R1 is always correct here, but we
+	 * rely on callers to never use this with "native" calls for reading
+	 * CSD or CID.  Native versions of those commands use the R2 type,
+	 * not R1 plus a data block.
+	 */
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+	data.blksz = len;
 	data.blocks = 1;
 	data.flags = MMC_DATA_READ;
 	data.sg = &sg;
 	data.sg_len = 1;
 
-	sg_init_one(&sg, ext_csd, 512);
+	sg_init_one(&sg, data_buf, len);
 
-	mmc_set_data_timeout(&data, card);
+	if (card)
+		mmc_set_data_timeout(&data, card);
 
-	mmc_wait_for_req(card->host, &mrq);
+	mmc_wait_for_req(host, &mrq);
+
+	memcpy(buf, data_buf, len);
+	kfree(data_buf);
 
 	if (cmd.error)
 		return cmd.error;
@@ -226,6 +265,67 @@ int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
 	return 0;
 }
 
+int mmc_send_csd(struct mmc_card *card, u32 *csd)
+{
+	if (!mmc_host_is_spi(card->host))
+		return mmc_send_cxd_native(card->host, card->rca << 16,
+				csd, MMC_SEND_CSD);
+
+	return mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd, 16);
+}
+
+int mmc_send_cid(struct mmc_host *host, u32 *cid)
+{
+	if (!mmc_host_is_spi(host)) {
+		if (!host->card)
+			return -EINVAL;
+		return mmc_send_cxd_native(host, host->card->rca << 16,
+				cid, MMC_SEND_CID);
+	}
+
+	return mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid, 16);
+}
+
+int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
+{
+	return mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD,
+			ext_csd, 512);
+}
+
+int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
+{
+	struct mmc_command cmd;
+	int err;
+
+	memset(&cmd, 0, sizeof(struct mmc_command));
+
+	cmd.opcode = MMC_SPI_READ_OCR;
+	cmd.arg = highcap ? (1 << 30) : 0;
+	cmd.flags = MMC_RSP_SPI_R3;
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+
+	*ocrp = cmd.resp[1];
+	return err;
+}
+
+int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
+{
+	struct mmc_command cmd;
+	int err;
+
+	memset(&cmd, 0, sizeof(struct mmc_command));
+
+	cmd.opcode = MMC_SPI_CRC_ON_OFF;
+	cmd.flags = MMC_RSP_SPI_R1;
+	cmd.arg = use_crc;
+
+	err = mmc_wait_for_cmd(host, &cmd, 0);
+	if (!err)
+		host->use_spi_crc = use_crc;
+	return err;
+}
+
 int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value)
 {
 	int err;
@@ -241,7 +341,7 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value)
 		  (index << 16) |
 		  (value << 8) |
 		  set;
-	cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
+	cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
 
 	err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
 	if (err)
@@ -261,13 +361,17 @@ int mmc_send_status(struct mmc_card *card, u32 *status)
 	memset(&cmd, 0, sizeof(struct mmc_command));
 
 	cmd.opcode = MMC_SEND_STATUS;
-	cmd.arg = card->rca << 16;
-	cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+	if (!mmc_host_is_spi(card->host))
+		cmd.arg = card->rca << 16;
+	cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
 
 	err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
 	if (err)
 		return err;
 
+	/* NOTE: callers are required to understand the difference
+	 * between "native" and SPI format status words!
+	 */
 	if (status)
 		*status = cmd.resp[0];
 

drivers/mmc/core/mmc_ops.h

@@ -22,6 +22,9 @@ int mmc_send_csd(struct mmc_card *card, u32 *csd);
 int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
 int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value);
 int mmc_send_status(struct mmc_card *card, u32 *status);
+int mmc_send_cid(struct mmc_host *host, u32 *cid);
+int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp);
+int mmc_spi_set_crc(struct mmc_host *host, int use_crc);
 
 #endif
 

drivers/mmc/core/sd.c

@@ -322,10 +322,22 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 	if (err)
 		goto err;
 
+	/*
+	 * For SPI, enable CRC as appropriate.
+	 */
+	if (mmc_host_is_spi(host)) {
+		err = mmc_spi_set_crc(host, use_spi_crc);
+		if (err)
+			goto err;
+	}
+
 	/*
 	 * Fetch CID from card.
 	 */
-	err = mmc_all_send_cid(host, cid);
+	if (mmc_host_is_spi(host))
+		err = mmc_send_cid(host, cid);
+	else
+		err = mmc_all_send_cid(host, cid);
 	if (err)
 		goto err;
 
@@ -351,13 +363,15 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 	}
 
 	/*
-	 * Set card RCA.
+	 * For native busses:  get card RCA and quit open drain mode.
 	 */
-	err = mmc_send_relative_addr(host, &card->rca);
-	if (err)
-		goto free_card;
+	if (!mmc_host_is_spi(host)) {
+		err = mmc_send_relative_addr(host, &card->rca);
+		if (err)
+			goto free_card;
 
-	mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
+		mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
+	}
 
 	if (!oldcard) {
 		/*
@@ -377,9 +391,11 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr,
 	/*
 	 * Select card, as all following commands rely on that.
 	 */
-	err = mmc_select_card(card);
-	if (err)
-		goto free_card;
+	if (!mmc_host_is_spi(host)) {
+		err = mmc_select_card(card);
+		if (err)
+			goto free_card;
+	}
 
 	if (!oldcard) {
 		/*
@@ -562,7 +578,8 @@ static void mmc_sd_suspend(struct mmc_host *host)
 	BUG_ON(!host->card);
 
 	mmc_claim_host(host);
-	mmc_deselect_cards(host);
+	if (!mmc_host_is_spi(host))
+		mmc_deselect_cards(host);
 	host->card->state &= ~MMC_STATE_HIGHSPEED;
 	mmc_release_host(host);
 }
@@ -622,6 +639,17 @@ int mmc_attach_sd(struct mmc_host *host, u32 ocr)
 
 	mmc_attach_bus(host, &mmc_sd_ops);
 
+	/*
+	 * We need to get OCR a different way for SPI.
+	 */
+	if (mmc_host_is_spi(host)) {
+		mmc_go_idle(host);
+
+		err = mmc_spi_read_ocr(host, 0, &ocr);
+		if (err)
+			goto err;
+	}
+
 	/*
 	 * Sanity check the voltages that the card claims to
 	 * support.

drivers/mmc/core/sd_ops.c

@@ -33,10 +33,10 @@ static int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
 
 	if (card) {
 		cmd.arg = card->rca << 16;
-		cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+		cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
 	} else {
 		cmd.arg = 0;
-		cmd.flags = MMC_RSP_R1 | MMC_CMD_BCR;
+		cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_BCR;
 	}
 
 	err = mmc_wait_for_cmd(host, &cmd, 0);
@@ -44,7 +44,7 @@ static int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
 		return err;
 
 	/* Check that card supported application commands */
-	if (!(cmd.resp[0] & R1_APP_CMD))
+	if (!mmc_host_is_spi(host) && !(cmd.resp[0] & R1_APP_CMD))
 		return -EOPNOTSUPP;
 
 	return 0;
@@ -83,8 +83,14 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card,
 		memset(&mrq, 0, sizeof(struct mmc_request));
 
 		err = mmc_app_cmd(host, card);
-		if (err)
+		if (err) {
+			/* no point in retrying; no APP commands allowed */
+			if (mmc_host_is_spi(host)) {
+				if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
+					break;
+			}
 			continue;
+		}
 
 		memset(&mrq, 0, sizeof(struct mmc_request));
 
@@ -99,6 +105,12 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, struct mmc_card *card,
 		err = cmd->error;
 		if (!cmd->error)
 			break;
+
+		/* no point in retrying illegal APP commands */
+		if (mmc_host_is_spi(host)) {
+			if (cmd->resp[0] & R1_SPI_ILLEGAL_COMMAND)
+				break;
+		}
 	}
 
 	return err;
@@ -147,23 +159,36 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 	memset(&cmd, 0, sizeof(struct mmc_command));
 
 	cmd.opcode = SD_APP_OP_COND;
-	cmd.arg = ocr;
-	cmd.flags = MMC_RSP_R3 | MMC_CMD_BCR;
+	if (mmc_host_is_spi(host))
+		cmd.arg = ocr & (1 << 30); /* SPI only defines one bit */
+	else
+		cmd.arg = ocr;
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;
 
 	for (i = 100; i; i--) {
 		err = mmc_wait_for_app_cmd(host, NULL, &cmd, MMC_CMD_RETRIES);
 		if (err)
 			break;
 
-		if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0)
+		/* if we're just probing, do a single pass */
+		if (ocr == 0)
 			break;
 
+		/* otherwise wait until reset completes */
+		if (mmc_host_is_spi(host)) {
+			if (!(cmd.resp[0] & R1_SPI_IDLE))
+				break;
+		} else {
+			if (cmd.resp[0] & MMC_CARD_BUSY)
+				break;
+		}
+
 		err = -ETIMEDOUT;
 
 		mmc_delay(10);
 	}
 
-	if (rocr)
+	if (rocr && !mmc_host_is_spi(host))
 		*rocr = cmd.resp[0];
 
 	return err;
@@ -174,6 +199,7 @@ int mmc_send_if_cond(struct mmc_host *host, u32 ocr)
 	struct mmc_command cmd;
 	int err;
 	static const u8 test_pattern = 0xAA;
+	u8 result_pattern;
 
 	/*
 	 * To support SD 2.0 cards, we must always invoke SD_SEND_IF_COND
@@ -182,13 +208,18 @@ int mmc_send_if_cond(struct mmc_host *host, u32 ocr)
 	 */
 	cmd.opcode = SD_SEND_IF_COND;
 	cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | test_pattern;
-	cmd.flags = MMC_RSP_R7 | MMC_CMD_BCR;
+	cmd.flags = MMC_RSP_SPI_R7 | MMC_RSP_R7 | MMC_CMD_BCR;
 
 	err = mmc_wait_for_cmd(host, &cmd, 0);
 	if (err)
 		return err;
 
-	if ((cmd.resp[0] & 0xFF) != test_pattern)
+	if (mmc_host_is_spi(host))
+		result_pattern = cmd.resp[1] & 0xFF;
+	else
+		result_pattern = cmd.resp[0] & 0xFF;
+
+	if (result_pattern != test_pattern)
 		return -EIO;
 
 	return 0;
@@ -229,6 +260,8 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr)
 	BUG_ON(!card->host);
 	BUG_ON(!scr);
 
+	/* NOTE: caller guarantees scr is heap-allocated */
+
 	err = mmc_app_cmd(card->host, card);
 	if (err)
 		return err;
@@ -242,7 +275,7 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr)
 
 	cmd.opcode = SD_APP_SEND_SCR;
 	cmd.arg = 0;
-	cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
 
 	data.blksz = 8;
 	data.blocks = 1;
@@ -278,6 +311,8 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int group,
 	BUG_ON(!card);
 	BUG_ON(!card->host);
 
+	/* NOTE: caller guarantees resp is heap-allocated */
+
 	mode = !!mode;
 	value &= 0xF;
 
@@ -292,7 +327,7 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int group,
 	cmd.arg = mode << 31 | 0x00FFFFFF;
 	cmd.arg &= ~(0xF << (group * 4));
 	cmd.arg |= value << (group * 4);
-	cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
 
 	data.blksz = 64;
 	data.blocks = 1;

drivers/mmc/core/sdio.c

@@ -269,6 +269,15 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
 	if (err)
 		goto err;
 
+	/*
+	 * For SPI, enable CRC as appropriate.
+	 */
+	if (mmc_host_is_spi(host)) {
+		err = mmc_spi_set_crc(host, use_spi_crc);
+		if (err)
+			goto err;
+	}
+
 	/*
 	 * The number of functions on the card is encoded inside
 	 * the ocr.
@@ -290,20 +299,24 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
 	host->card = card;
 
 	/*
-	 * Set card RCA.
+	 * For native busses:  set card RCA and quit open drain mode.
 	 */
-	err = mmc_send_relative_addr(host, &card->rca);
-	if (err)
-		goto remove;
+	if (!mmc_host_is_spi(host)) {
+		err = mmc_send_relative_addr(host, &card->rca);
+		if (err)
+			goto remove;
 
-	mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
+		mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
+	}
 
 	/*
 	 * Select card, as all following commands rely on that.
 	 */
-	err = mmc_select_card(card);
-	if (err)
-		goto remove;
+	if (!mmc_host_is_spi(host)) {
+		err = mmc_select_card(card);
+		if (err)
+			goto remove;
+	}
 
 	/*
 	 * Read the common registers.

drivers/mmc/core/sdio_ops.c

@@ -30,23 +30,39 @@ int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
 
 	cmd.opcode = SD_IO_SEND_OP_COND;
 	cmd.arg = ocr;
-	cmd.flags = MMC_RSP_R4 | MMC_CMD_BCR;
+	cmd.flags = MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR;
 
 	for (i = 100; i; i--) {
 		err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
 		if (err)
 			break;
 
-		if (cmd.resp[0] & MMC_CARD_BUSY || ocr == 0)
+		/* if we're just probing, do a single pass */
+		if (ocr == 0)
 			break;
 
+		/* otherwise wait until reset completes */
+		if (mmc_host_is_spi(host)) {
+			/*
+			 * Both R1_SPI_IDLE and MMC_CARD_BUSY indicate
+			 * an initialized card under SPI, but some cards
+			 * (Marvell's) only behave when looking at this
+			 * one.
+			 */
+			if (cmd.resp[1] & MMC_CARD_BUSY)
+				break;
+		} else {
+			if (cmd.resp[0] & MMC_CARD_BUSY)
+				break;
+		}
+
 		err = -ETIMEDOUT;
 
 		mmc_delay(10);
 	}
 
 	if (rocr)
-		*rocr = cmd.resp[0];
+		*rocr = cmd.resp[mmc_host_is_spi(host) ? 1 : 0];
 
 	return err;
 }
@@ -68,21 +84,29 @@ int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
 	cmd.arg |= (write && out) ? 0x08000000 : 0x00000000;
 	cmd.arg |= addr << 9;
 	cmd.arg |= in;
-	cmd.flags = MMC_RSP_R5 | MMC_CMD_AC;
+	cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
 
 	err = mmc_wait_for_cmd(card->host, &cmd, 0);
 	if (err)
 		return err;
 
-	if (cmd.resp[0] & R5_ERROR)
-		return -EIO;
-	if (cmd.resp[0] & R5_FUNCTION_NUMBER)
-		return -EINVAL;
-	if (cmd.resp[0] & R5_OUT_OF_RANGE)
-		return -ERANGE;
+	if (mmc_host_is_spi(card->host)) {
+		/* host driver already reported errors */
+	} else {
+		if (cmd.resp[0] & R5_ERROR)
+			return -EIO;
+		if (cmd.resp[0] & R5_FUNCTION_NUMBER)
+			return -EINVAL;
+		if (cmd.resp[0] & R5_OUT_OF_RANGE)
+			return -ERANGE;
+	}
 
-	if (out)
-		*out = cmd.resp[0] & 0xFF;
+	if (out) {
+		if (mmc_host_is_spi(card->host))
+			*out = (cmd.resp[0] >> 8) & 0xFF;
+		else
+			*out = cmd.resp[0] & 0xFF;
+	}
 
 	return 0;
 }
@@ -117,7 +141,7 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
 		cmd.arg |= (blksz == 512) ? 0 : blksz;	/* byte mode */
 	else
 		cmd.arg |= 0x08000000 | blocks;		/* block mode */
-	cmd.flags = MMC_RSP_R5 | MMC_CMD_ADTC;
+	cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
 
 	data.blksz = blksz;
 	data.blocks = blocks;
@@ -136,12 +160,16 @@ int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
 	if (data.error)
 		return data.error;
 
-	if (cmd.resp[0] & R5_ERROR)
-		return -EIO;
-	if (cmd.resp[0] & R5_FUNCTION_NUMBER)
-		return -EINVAL;
-	if (cmd.resp[0] & R5_OUT_OF_RANGE)
-		return -ERANGE;
+	if (mmc_host_is_spi(card->host)) {
+		/* host driver already reported errors */
+	} else {
+		if (cmd.resp[0] & R5_ERROR)
+			return -EIO;
+		if (cmd.resp[0] & R5_FUNCTION_NUMBER)
+			return -EINVAL;
+		if (cmd.resp[0] & R5_OUT_OF_RANGE)
+			return -ERANGE;
+	}
 
 	return 0;
 }