Merge tag 'at91-dt' of git://github.com/at91linux/linux-at91 into next/dt

From Nicolas Ferre:
First DT series for 3.13
- addition of sound for at91sam9n12
- a little fix for MMC vs. SPI on at91sam9g20ek

* tag 'at91-dt' of git://github.com/at91linux/linux-at91:
  ARM: at91: remove pinctrl conflict between mmc and SPI for at91sam9g20ek
  ARM: at91: add sound support on at91sam9n12ek board
  ARM: at91: enable ssc on at91sam9n12ek board
  ARM: at91: enable wm8904 on at91sam9n12ek board
  ARM: at91: add ssc dma parameter for at91sam9n12
  ARM: at91: add at91sam9n12 ssc clock in look up table

Signed-off-by: Kevin Hilman <khilman@linaro.org>

arch/arm/boot/dts/at91sam9g20ek_common.dtsi

@@ -96,7 +96,6 @@
 			};
 
 			spi0: spi@fffc8000 {
-				status = "okay";
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
 				mtd_dataflash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";

arch/arm/boot/dts/at91sam9n12.dtsi

@@ -437,6 +437,9 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xf0010000 0x4000>;
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+				dmas = <&dma 0 AT91_DMA_CFG_PER_ID(21)>,
+				       <&dma 0 AT91_DMA_CFG_PER_ID(22)>;
+				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";

arch/arm/boot/dts/at91sam9n12ek.dts

@@ -38,9 +38,18 @@
 				status = "okay";
 			};
 
+			ssc0: ssc@f0010000 {
+				status = "okay";
+			};
+
 			i2c0: i2c@f8010000 {
 				status = "okay";
 
+				wm8904: codec@1a {
+					compatible = "wm8904";
+					reg = <0x1a>;
+				};
+
 				qt1070: keyboard@1b {
 					compatible = "qt1070";
 					reg = <0x1b>;
@@ -82,6 +91,13 @@
 							<AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
 				};
+
+				sound {
+					pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+				};
 			};
 
 			spi0: spi@f0000000 {
@@ -142,4 +158,22 @@
 			gpio-key,wakeup;
 		};
 	};
+
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_audio_mck>;
+
+		atmel,model = "wm8904 @ AT91SAM9N12";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+	};
 };

arch/arm/mach-at91/at91sam9n12.c

@@ -169,6 +169,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk),
 	CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk),
+	CLKDEV_CON_DEV_ID(NULL, "f0010000.ssc", &ssc_clk),
 	CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
 	CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),