Merge branch 'x86/urgent' into x86/irq

Merge reason: conflict in arch/x86/kernel/apic/io_apic.c

Resolved Conflicts:
	arch/x86/kernel/apic/io_apic.c

Signed-off-by: H. Peter Anvin <hpa@zytor.com>

arch/x86/ia32/ia32_aout.c

@@ -327,7 +327,6 @@ static int load_aout_binary(struct linux_binprm *bprm, struct pt_regs *regs)
 	current->mm->free_area_cache = TASK_UNMAPPED_BASE;
 	current->mm->cached_hole_size = 0;
 
-	current->mm->mmap = NULL;
 	install_exec_creds(bprm);
 	current->flags &= ~PF_FORKNOEXEC;
 

arch/x86/include/asm/io_apic.h

@@ -160,6 +160,7 @@ extern int io_apic_get_redir_entries(int ioapic);
 struct io_apic_irq_attr;
 extern int io_apic_set_pci_routing(struct device *dev, int irq,
 		 struct io_apic_irq_attr *irq_attr);
+void setup_IO_APIC_irq_extra(u32 gsi);
 extern int (*ioapic_renumber_irq)(int ioapic, int irq);
 extern void ioapic_init_mappings(void);
 extern void ioapic_insert_resources(void);

arch/x86/include/asm/system.h

@@ -11,9 +11,9 @@
 #include <linux/irqflags.h>
 
 /* entries in ARCH_DLINFO: */
-#ifdef CONFIG_IA32_EMULATION
+#if defined(CONFIG_IA32_EMULATION) || !defined(CONFIG_X86_64)
 # define AT_VECTOR_SIZE_ARCH 2
-#else
+#else /* else it's non-compat x86-64 */
 # define AT_VECTOR_SIZE_ARCH 1
 #endif
 

arch/x86/kernel/acpi/boot.c

@@ -446,6 +446,12 @@ void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
 int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
 {
 	*irq = gsi;
+
+#ifdef CONFIG_X86_IO_APIC
+	if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC)
+		setup_IO_APIC_irq_extra(gsi);
+#endif
+
 	return 0;
 }
 
@@ -473,7 +479,8 @@ int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
 		plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
 	}
 #endif
-	acpi_gsi_to_irq(plat_gsi, &irq);
+	irq = plat_gsi;
+
 	return irq;
 }
 
@@ -1185,9 +1192,6 @@ static void __init acpi_process_madt(void)
 		if (!error) {
 			acpi_lapic = 1;
 
-#ifdef CONFIG_X86_BIGSMP
-			generic_bigsmp_probe();
-#endif
 			/*
 			 * Parse MADT IO-APIC entries
 			 */
@@ -1197,8 +1201,6 @@ static void __init acpi_process_madt(void)
 				acpi_ioapic = 1;
 
 				smp_found_config = 1;
-				if (apic->setup_apic_routing)
-					apic->setup_apic_routing();
 			}
 		}
 		if (error == -EINVAL) {

arch/x86/kernel/apic/apic.c

@@ -1641,9 +1641,7 @@ int __init APIC_init_uniprocessor(void)
 #endif
 
 	enable_IR_x2apic();
-#ifdef CONFIG_X86_64
 	default_setup_apic_routing();
-#endif
 
 	verify_local_APIC();
 	connect_bsp_APIC();
@@ -1891,21 +1889,6 @@ void __cpuinit generic_processor_info(int apicid, int version)
 	if (apicid > max_physical_apicid)
 		max_physical_apicid = apicid;
 
-#ifdef CONFIG_X86_32
-	if (num_processors > 8) {
-		switch (boot_cpu_data.x86_vendor) {
-		case X86_VENDOR_INTEL:
-			if (!APIC_XAPIC(version)) {
-				def_to_bigsmp = 0;
-				break;
-			}
-			/* If P4 and above fall through */
-		case X86_VENDOR_AMD:
-			def_to_bigsmp = 1;
-		}
-	}
-#endif
-
 #if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
 	early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
 	early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid;

arch/x86/kernel/apic/io_apic.c

@@ -1538,6 +1538,56 @@ static void __init setup_IO_APIC_irqs(void)
 			" (apicid-pin) not connected\n");
 }
 
+/*
+ * for the gsit that is not in first ioapic
+ * but could not use acpi_register_gsi()
+ * like some special sci in IBM x3330
+ */
+void setup_IO_APIC_irq_extra(u32 gsi)
+{
+	int apic_id = 0, pin, idx, irq;
+	int node = cpu_to_node(boot_cpu_id);
+	struct irq_desc *desc;
+	struct irq_cfg *cfg;
+
+	/*
+	 * Convert 'gsi' to 'ioapic.pin'.
+	 */
+	apic_id = mp_find_ioapic(gsi);
+	if (apic_id < 0)
+		return;
+
+	pin = mp_find_ioapic_pin(apic_id, gsi);
+	idx = find_irq_entry(apic_id, pin, mp_INT);
+	if (idx == -1)
+		return;
+
+	irq = pin_2_irq(idx, apic_id, pin);
+#ifdef CONFIG_SPARSE_IRQ
+	desc = irq_to_desc(irq);
+	if (desc)
+		return;
+#endif
+	desc = irq_to_desc_alloc_node(irq, node);
+	if (!desc) {
+		printk(KERN_INFO "can not get irq_desc for %d\n", irq);
+		return;
+	}
+
+	cfg = desc->chip_data;
+	add_pin_to_irq_node(cfg, node, apic_id, pin);
+
+	if (test_bit(pin, mp_ioapic_routing[apic_id].pin_programmed)) {
+		pr_debug("Pin %d-%d already programmed\n",
+			 mp_ioapics[apic_id].apicid, pin);
+		return;
+	}
+	set_bit(pin, mp_ioapic_routing[apic_id].pin_programmed);
+
+	setup_IO_APIC_irq(apic_id, pin, irq, desc,
+			irq_trigger(idx), irq_polarity(idx));
+}
+
 /*
  * Set up the timer pin, possibly with the 8259A-master behind.
  */
@@ -3252,14 +3302,12 @@ int create_irq(void)
 void destroy_irq(unsigned int irq)
 {
 	unsigned long flags;
-	struct irq_cfg *cfg;
 
 	dynamic_irq_cleanup_keep_chip_data(irq);
 
 	free_irte(irq);
 	spin_lock_irqsave(&vector_lock, flags);
-	cfg = irq_to_desc(irq)->chip_data;
-	__clear_irq_vector(irq, cfg);
+	__clear_irq_vector(irq, get_irq_chip_data(irq));
 	spin_unlock_irqrestore(&vector_lock, flags);
 }
 

arch/x86/kernel/apic/probe_32.c

@@ -52,7 +52,32 @@ static int __init print_ipi_mode(void)
 }
 late_initcall(print_ipi_mode);
 
-void default_setup_apic_routing(void)
+void __init default_setup_apic_routing(void)
+{
+	int version = apic_version[boot_cpu_physical_apicid];
+
+	if (num_possible_cpus() > 8) {
+		switch (boot_cpu_data.x86_vendor) {
+		case X86_VENDOR_INTEL:
+			if (!APIC_XAPIC(version)) {
+				def_to_bigsmp = 0;
+				break;
+			}
+			/* If P4 and above fall through */
+		case X86_VENDOR_AMD:
+			def_to_bigsmp = 1;
+		}
+	}
+
+#ifdef CONFIG_X86_BIGSMP
+	generic_bigsmp_probe();
+#endif
+
+	if (apic->setup_apic_routing)
+		apic->setup_apic_routing();
+}
+
+static void setup_apic_flat_routing(void)
 {
 #ifdef CONFIG_X86_IO_APIC
 	printk(KERN_INFO
@@ -103,7 +128,7 @@ struct apic apic_default = {
 	.init_apic_ldr			= default_init_apic_ldr,
 
 	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
-	.setup_apic_routing		= default_setup_apic_routing,
+	.setup_apic_routing		= setup_apic_flat_routing,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= default_apicid_to_node,
 	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,

arch/x86/kernel/apic/probe_64.c

@@ -67,7 +67,7 @@ void __init default_setup_apic_routing(void)
 	}
 #endif
 
-	if (apic == &apic_flat && num_processors > 8)
+	if (apic == &apic_flat && num_possible_cpus() > 8)
 			apic = &apic_physflat;
 
 	printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);

arch/x86/kernel/mpparse.c

@@ -359,13 +359,6 @@ static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
 		x86_init.mpparse.mpc_record(1);
 	}
 
-#ifdef CONFIG_X86_BIGSMP
-	generic_bigsmp_probe();
-#endif
-
-	if (apic->setup_apic_routing)
-		apic->setup_apic_routing();
-
 	if (!num_processors)
 		printk(KERN_ERR "MPTABLE: no processors registered!\n");
 	return num_processors;

arch/x86/kernel/reboot.c

@@ -461,6 +461,14 @@ static struct dmi_system_id __initdata pci_reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Macmini3,1"),
 		},
 	},
+	{	/* Handle problems with rebooting on the iMac9,1. */
+		.callback = set_pci_reboot,
+		.ident = "Apple iMac9,1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1"),
+		},
+	},
 	{ }
 };
 

arch/x86/kernel/smpboot.c

@@ -1083,9 +1083,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	set_cpu_sibling_map(0);
 
 	enable_IR_x2apic();
-#ifdef CONFIG_X86_64
 	default_setup_apic_routing();
-#endif
 
 	if (smp_sanity_check(max_cpus) < 0) {
 		printk(KERN_INFO "SMP disabled\n");

arch/x86/mm/gup.c

@@ -18,7 +18,7 @@ static inline pte_t gup_get_pte(pte_t *ptep)
 #else
 	/*
 	 * With get_user_pages_fast, we walk down the pagetables without taking
-	 * any locks.  For this we would like to load the pointers atoimcally,
+	 * any locks.  For this we would like to load the pointers atomically,
 	 * but that is not possible (without expensive cmpxchg8b) on PAE.  What
 	 * we do have is the guarantee that a pte will only either go from not
 	 * present to present, or present to not present or both -- it will not

drivers/char/agp/amd64-agp.c

@@ -767,16 +767,19 @@ int __init agp_amd64_init(void)
 
 static int __init agp_amd64_mod_init(void)
 {
+#ifndef MODULE
 	if (gart_iommu_aperture)
 		return agp_bridges_found ? 0 : -ENODEV;
-
+#endif
 	return agp_amd64_init();
 }
 
 static void __exit agp_amd64_cleanup(void)
 {
+#ifndef MODULE
 	if (gart_iommu_aperture)
 		return;
+#endif
 	if (aperture_resource)
 		release_resource(aperture_resource);
 	pci_unregister_driver(&agp_amd64_pci_driver);