V4L/DVB (em28xx): Add support for Pinnacle Dazzle DVC 100

The patch below adds the "Pinnacle Dazzle DVC 100" to the list of
cards supported by the em28xx driver. As the configuration is the same
as the DVC 90 one, it simply adds a new USB ID to the list of devices
supported by the DVC 90 configuration.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Documentation/video4linux/CARDLIST.em28xx

@@ -7,7 +7,7 @@
   6 -> Terratec Cinergy 200 USB                 (em2800)
   7 -> Leadtek Winfast USB II                   (em2800)
   8 -> Kworld USB2800                           (em2800)
-  9 -> Pinnacle Dazzle DVC 90                   (em2820/em2840) [2304:0207]
+  9 -> Pinnacle Dazzle DVC 90/DVC 100           (em2820/em2840) [2304:0207,2304:021a]
  10 -> Hauppauge WinTV HVR 900                  (em2880)        [2040:6500]
  11 -> Terratec Hybrid XS                       (em2880)        [0ccd:0042]
  12 -> Kworld PVR TV 2800 RF                    (em2820/em2840)

drivers/media/video/em28xx/em28xx-cards.c

@@ -329,7 +329,7 @@ struct em28xx_board em28xx_boards[] = {
 		} },
 	},
 	[EM2820_BOARD_PINNACLE_DVC_90] = {
-		.name         = "Pinnacle Dazzle DVC 90",
+		.name         = "Pinnacle Dazzle DVC 90/DVC 100",
 		.vchannels    = 3,
 		.has_tuner    = 0,
 		.decoder      = EM28XX_SAA7113,
@@ -416,6 +416,8 @@ struct usb_device_id em28xx_id_table [] = {
 			.driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
 	{ USB_DEVICE(0x2304, 0x0207),
 			.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
+	{ USB_DEVICE(0x2304, 0x021a),
+			.driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
 	{ USB_DEVICE(0x2040, 0x6500),
 			.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
 	{ USB_DEVICE(0x2040, 0x6513),