Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (47 commits)
  ehea: Fix napi list corruption on ifconfig down
  igbvf: Allow VF driver to correctly recognize failure to set mac
  3c59x: Fix build failure with gcc 3.2
  sky2: Avoid transmits during sky2_down()
  iwlagn: do not send key clear commands when rfkill enabled
  libertas: Read buffer overflow
  drivers/net/wireless: introduce missing kfree
  drivers/net/wireless/iwlwifi: introduce missing kfree
  zd1211rw: fix unaligned access in zd_mac_rx
  cfg80211: fix regression on beacon world roaming feature
  cfg80211: add two missing NULL pointer checks
  ixgbe: Patch to modify 82598 PCIe completion timeout values
  bluetooth: rfcomm_init bug fix
  mlx4_en: Fix double pci unmapping.
  mISDN: Fix handling of receive buffer size in L1oIP
  pcnet32: VLB support fixes
  pcnet32: remove superfluous NULL pointer check in pcnet32_probe1()
  net: restore the original spinlock to protect unicast list
  netxen: fix coherent dma mask setting
  mISDN: Read buffer overflow
  ...

Documentation/DocBook/kernel-hacking.tmpl

@@ -449,8 +449,8 @@ printk(KERN_INFO "i = %u\n", i);
    </para>
 
    <programlisting>
-__u32 ipaddress;
-printk(KERN_INFO "my ip: %d.%d.%d.%d\n", NIPQUAD(ipaddress));
+__be32 ipaddress;
+printk(KERN_INFO "my ip: %pI4\n", &amp;ipaddress);
    </programlisting>
 
    <para>

drivers/isdn/mISDN/l1oip_core.c

@@ -1480,7 +1480,7 @@ l1oip_init(void)
 		return -ENOMEM;
 
 	l1oip_cnt = 0;
-	while (type[l1oip_cnt] && l1oip_cnt < MAX_CARDS) {
+	while (l1oip_cnt < MAX_CARDS && type[l1oip_cnt]) {
 		switch (type[l1oip_cnt] & 0xff) {
 		case 1:
 			pri = 0;

drivers/net/3c515.c

@@ -832,7 +832,9 @@ static int corkscrew_open(struct net_device *dev)
 			skb_reserve(skb, 2);	/* Align IP on 16 byte boundaries */
 			vp->rx_ring[i].addr = isa_virt_to_bus(skb->data);
 		}
-		vp->rx_ring[i - 1].next = isa_virt_to_bus(&vp->rx_ring[0]);	/* Wrap the ring. */
+		if (i != 0)
+			vp->rx_ring[i - 1].next =
+				isa_virt_to_bus(&vp->rx_ring[0]);	/* Wrap the ring. */
 		outl(isa_virt_to_bus(&vp->rx_ring[0]), ioaddr + UpListPtr);
 	}
 	if (vp->full_bus_master_tx) {	/* Boomerang bus master Tx. */

drivers/net/3c59x.c

@@ -2721,13 +2721,15 @@ dump_tx_ring(struct net_device *dev)
 				   &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]);
 			issue_and_wait(dev, DownStall);
 			for (i = 0; i < TX_RING_SIZE; i++) {
-				pr_err("  %d: @%p  length %8.8x status %8.8x\n", i,
-					   &vp->tx_ring[i],
+				unsigned int length;
+
 #if DO_ZEROCOPY
-					   le32_to_cpu(vp->tx_ring[i].frag[0].length),
+				length = le32_to_cpu(vp->tx_ring[i].frag[0].length);
 #else
-					   le32_to_cpu(vp->tx_ring[i].length),
+				length = le32_to_cpu(vp->tx_ring[i].length);
 #endif
+				pr_err("  %d: @%p  length %8.8x status %8.8x\n",
+					   i, &vp->tx_ring[i], length,
 					   le32_to_cpu(vp->tx_ring[i].status));
 			}
 			if (!stalled)

drivers/net/eexpress.c

@@ -1474,13 +1474,13 @@ static void eexp_hw_init586(struct net_device *dev)
 	outw(0x0000, ioaddr + 0x800c);
 	outw(0x0000, ioaddr + 0x800e);
 
-	for (i = 0; i < (sizeof(start_code)); i+=32) {
+	for (i = 0; i < ARRAY_SIZE(start_code) * 2; i+=32) {
 		int j;
 		outw(i, ioaddr + SM_PTR);
-		for (j = 0; j < 16; j+=2)
+		for (j = 0; j < 16 && (i+j)/2 < ARRAY_SIZE(start_code); j+=2)
 			outw(start_code[(i+j)/2],
 			     ioaddr+0x4000+j);
-		for (j = 0; j < 16; j+=2)
+		for (j = 0; j < 16 && (i+j+16)/2 < ARRAY_SIZE(start_code); j+=2)
 			outw(start_code[(i+j+16)/2],
 			     ioaddr+0x8000+j);
 	}

drivers/net/ehea/ehea.h

@@ -40,7 +40,7 @@
 #include <asm/io.h>
 
 #define DRV_NAME	"ehea"
-#define DRV_VERSION	"EHEA_0101"
+#define DRV_VERSION	"EHEA_0102"
 
 /* eHEA capability flags */
 #define DLPAR_PORT_ADD_REM 1

drivers/net/ehea/ehea_main.c

@@ -1545,6 +1545,9 @@ static int ehea_clean_portres(struct ehea_port *port, struct ehea_port_res *pr)
 {
 	int ret, i;
 
+	if (pr->qp)
+		netif_napi_del(&pr->napi);
+
 	ret = ehea_destroy_qp(pr->qp);
 
 	if (!ret) {

drivers/net/gianfar_ethtool.c

@@ -366,9 +366,8 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
 		return -EINVAL;
 	}
 
-	priv->rxic = mk_ic_value(
-		gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs),
-		cvals->rx_max_coalesced_frames);
+	priv->rxic = mk_ic_value(cvals->rx_max_coalesced_frames,
+		gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs));
 
 	/* Set up tx coalescing */
 	if ((cvals->tx_coalesce_usecs == 0) ||
@@ -390,9 +389,8 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
 		return -EINVAL;
 	}
 
-	priv->txic = mk_ic_value(
-		gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs),
-		cvals->tx_max_coalesced_frames);
+	priv->txic = mk_ic_value(cvals->tx_max_coalesced_frames,
+		gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs));
 
 	gfar_write(&priv->regs->rxic, 0);
 	if (priv->rxcoalescing)

drivers/net/igbvf/vf.c

@@ -274,6 +274,8 @@ static s32 e1000_set_vfta_vf(struct e1000_hw *hw, u16 vid, bool set)
 
 	err = mbx->ops.read_posted(hw, msgbuf, 2);
 
+	msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
+
 	/* if nacked the vlan was rejected */
 	if (!err && (msgbuf[0] == (E1000_VF_SET_VLAN | E1000_VT_MSGTYPE_NACK)))
 		err = -E1000_ERR_MAC_INIT;
@@ -317,6 +319,8 @@ static void e1000_rar_set_vf(struct e1000_hw *hw, u8 * addr, u32 index)
 	if (!ret_val)
 		ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
 
+	msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
+
 	/* if nacked the address was rejected, use "perm_addr" */
 	if (!ret_val &&
 	    (msgbuf[0] == (E1000_VF_SET_MAC_ADDR | E1000_VT_MSGTYPE_NACK)))

drivers/net/ixgbe/ixgbe.h

@@ -96,6 +96,8 @@
 #define IXGBE_TX_FLAGS_VLAN_PRIO_MASK   0x0000e000
 #define IXGBE_TX_FLAGS_VLAN_SHIFT	16
 
+#define IXGBE_MAX_RSC_INT_RATE          162760
+
 /* wrapper around a pointer to a socket buffer,
  * so a DMA handle can be stored along with the buffer */
 struct ixgbe_tx_buffer {

drivers/net/ixgbe/ixgbe_82598.c

@@ -49,6 +49,51 @@ static s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
 static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
                                        u8 *eeprom_data);
 
+/**
+ *  ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
+ *  @hw: pointer to the HW structure
+ *
+ *  The defaults for 82598 should be in the range of 50us to 50ms,
+ *  however the hardware default for these parts is 500us to 1ms which is less
+ *  than the 10ms recommended by the pci-e spec.  To address this we need to
+ *  increase the value to either 10ms to 250ms for capability version 1 config,
+ *  or 16ms to 55ms for version 2.
+ **/
+void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
+{
+	struct ixgbe_adapter *adapter = hw->back;
+	u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
+	u16 pcie_devctl2;
+
+	/* only take action if timeout value is defaulted to 0 */
+	if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
+		goto out;
+
+	/*
+	 * if capababilities version is type 1 we can write the
+	 * timeout of 10ms to 250ms through the GCR register
+	 */
+	if (!(gcr & IXGBE_GCR_CAP_VER2)) {
+		gcr |= IXGBE_GCR_CMPL_TMOUT_10ms;
+		goto out;
+	}
+
+	/*
+	 * for version 2 capabilities we need to write the config space
+	 * directly in order to set the completion timeout value for
+	 * 16ms to 55ms
+	 */
+	pci_read_config_word(adapter->pdev,
+	                     IXGBE_PCI_DEVICE_CONTROL2, &pcie_devctl2);
+	pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
+	pci_write_config_word(adapter->pdev,
+	                      IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
+out:
+	/* disable completion timeout resend */
+	gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
+	IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr);
+}
+
 /**
  *  ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count
  *  @hw: pointer to hardware structure
@@ -152,6 +197,26 @@ out:
 	return ret_val;
 }
 
+/**
+ *  ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware using the generic start_hw function.
+ *  Then set pcie completion timeout
+ **/
+s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
+{
+	s32 ret_val = 0;
+
+	ret_val = ixgbe_start_hw_generic(hw);
+
+	/* set the completion timeout for interface */
+	if (ret_val == 0)
+		ixgbe_set_pcie_completion_timeout(hw);
+
+	return ret_val;
+}
+
 /**
  *  ixgbe_get_link_capabilities_82598 - Determines link capabilities
  *  @hw: pointer to hardware structure
@@ -1085,7 +1150,7 @@ out:
 static struct ixgbe_mac_operations mac_ops_82598 = {
 	.init_hw		= &ixgbe_init_hw_generic,
 	.reset_hw		= &ixgbe_reset_hw_82598,
-	.start_hw		= &ixgbe_start_hw_generic,
+	.start_hw		= &ixgbe_start_hw_82598,
 	.clear_hw_cntrs		= &ixgbe_clear_hw_cntrs_generic,
 	.get_media_type		= &ixgbe_get_media_type_82598,
 	.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,

drivers/net/ixgbe/ixgbe_ethtool.c

@@ -1975,7 +1975,10 @@ static int ixgbe_set_coalesce(struct net_device *netdev,
 		 * any other value means disable eitr, which is best
 		 * served by setting the interrupt rate very high
 		 */
-		adapter->eitr_param = IXGBE_MAX_INT_RATE;
+		if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
+			adapter->eitr_param = IXGBE_MAX_RSC_INT_RATE;
+		else
+			adapter->eitr_param = IXGBE_MAX_INT_RATE;
 		adapter->itr_setting = 0;
 	}
 
@@ -1999,13 +2002,13 @@ static int ixgbe_set_flags(struct net_device *netdev, u32 data)
 
 	ethtool_op_set_flags(netdev, data);
 
-	if (!(adapter->flags & IXGBE_FLAG2_RSC_CAPABLE))
+	if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
 		return 0;
 
 	/* if state changes we need to update adapter->flags and reset */
 	if ((!!(data & ETH_FLAG_LRO)) != 
-	    (!!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED))) {
-		adapter->flags ^= IXGBE_FLAG2_RSC_ENABLED;
+	    (!!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))) {
+		adapter->flags2 ^= IXGBE_FLAG2_RSC_ENABLED;
 		if (netif_running(netdev))
 			ixgbe_reinit_locked(adapter);
 		else

drivers/net/ixgbe/ixgbe_main.c

@@ -780,7 +780,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 		prefetch(next_rxd);
 		cleaned_count++;
 
-		if (adapter->flags & IXGBE_FLAG2_RSC_CAPABLE)
+		if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)
 			rsc_count = ixgbe_get_rsc_count(rx_desc);
 
 		if (rsc_count) {
@@ -2036,7 +2036,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 			IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype);
 		}
 	} else {
-		if (!(adapter->flags & IXGBE_FLAG2_RSC_ENABLED) &&
+		if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) &&
 		    (netdev->mtu <= ETH_DATA_LEN))
 			rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE;
 		else
@@ -2165,7 +2165,7 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
 		IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
 	}
 
-	if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED) {
+	if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
 		/* Enable 82599 HW-RSC */
 		for (i = 0; i < adapter->num_rx_queues; i++) {
 			j = adapter->rx_ring[i].reg_idx;
@@ -3812,8 +3812,8 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 		adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598;
 	} else if (hw->mac.type == ixgbe_mac_82599EB) {
 		adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
-		adapter->flags |= IXGBE_FLAG2_RSC_CAPABLE;
-		adapter->flags |= IXGBE_FLAG2_RSC_ENABLED;
+		adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE;
+		adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
 		adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
 		adapter->ring_feature[RING_F_FDIR].indices =
 		                                         IXGBE_MAX_FDIR_INDICES;
@@ -5360,12 +5360,19 @@ static int ixgbe_del_sanmac_netdev(struct net_device *dev)
 static void ixgbe_netpoll(struct net_device *netdev)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	int i;
 
-	disable_irq(adapter->pdev->irq);
 	adapter->flags |= IXGBE_FLAG_IN_NETPOLL;
-	ixgbe_intr(adapter->pdev->irq, netdev);
+	if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+		int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+		for (i = 0; i < num_q_vectors; i++) {
+			struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
+			ixgbe_msix_clean_many(0, q_vector);
+		}
+	} else {
+		ixgbe_intr(adapter->pdev->irq, netdev);
+	}
 	adapter->flags &= ~IXGBE_FLAG_IN_NETPOLL;
-	enable_irq(adapter->pdev->irq);
 }
 #endif
 
@@ -5611,7 +5618,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	if (pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
-	if (adapter->flags & IXGBE_FLAG2_RSC_ENABLED)
+	if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
 		netdev->features |= NETIF_F_LRO;
 
 	/* make sure the EEPROM is good */

drivers/net/ixgbe/ixgbe_type.h

@@ -718,6 +718,12 @@
 #define IXGBE_ECC_STATUS_82599  0x110E0
 #define IXGBE_BAR_CTRL_82599    0x110F4
 
+/* PCI Express Control */
+#define IXGBE_GCR_CMPL_TMOUT_MASK       0x0000F000
+#define IXGBE_GCR_CMPL_TMOUT_10ms       0x00001000
+#define IXGBE_GCR_CMPL_TMOUT_RESEND     0x00010000
+#define IXGBE_GCR_CAP_VER2              0x00040000
+
 /* Time Sync Registers */
 #define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */
 #define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */
@@ -1521,6 +1527,7 @@
 
 /* PCI Bus Info */
 #define IXGBE_PCI_LINK_STATUS     0xB2
+#define IXGBE_PCI_DEVICE_CONTROL2 0xC8
 #define IXGBE_PCI_LINK_WIDTH      0x3F0
 #define IXGBE_PCI_LINK_WIDTH_1    0x10
 #define IXGBE_PCI_LINK_WIDTH_2    0x20
@@ -1531,6 +1538,7 @@
 #define IXGBE_PCI_LINK_SPEED_5000 0x2
 #define IXGBE_PCI_HEADER_TYPE_REGISTER  0x0E
 #define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80
+#define IXGBE_PCI_DEVICE_CONTROL2_16ms  0x0005
 
 /* Number of 100 microseconds we wait for PCI Express master disable */
 #define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800

drivers/net/mlx4/en_tx.c

@@ -249,6 +249,7 @@ static u32 mlx4_en_free_tx_desc(struct mlx4_en_priv *priv,
 				pci_unmap_page(mdev->pdev,
 					(dma_addr_t) be64_to_cpu(data->addr),
 					 frag->size, PCI_DMA_TODEVICE);
+				++data;
 			}
 		}
 		/* Stamp the freed descriptor */

drivers/net/netxen/netxen_nic_main.c

@@ -221,7 +221,7 @@ netxen_napi_disable(struct netxen_adapter *adapter)
 	}
 }
 
-static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id)
+static int nx_set_dma_mask(struct netxen_adapter *adapter)
 {
 	struct pci_dev *pdev = adapter->pdev;
 	uint64_t mask, cmask;
@@ -229,19 +229,17 @@ static int nx_set_dma_mask(struct netxen_adapter *adapter, uint8_t revision_id)
 	adapter->pci_using_dac = 0;
 
 	mask = DMA_BIT_MASK(32);
-	/*
-	 * Consistent DMA mask is set to 32 bit because it cannot be set to
-	 * 35 bits. For P3 also leave it at 32 bits for now. Only the rings
-	 * come off this pool.
-	 */
 	cmask = DMA_BIT_MASK(32);
 
+	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
 #ifndef CONFIG_IA64
-	if (revision_id >= NX_P3_B0)
-		mask = DMA_BIT_MASK(39);
-	else if (revision_id == NX_P2_C1)
 		mask = DMA_BIT_MASK(35);
 #endif
+	} else {
+		mask = DMA_BIT_MASK(39);
+		cmask = mask;
+	}
+
 	if (pci_set_dma_mask(pdev, mask) == 0 &&
 		pci_set_consistent_dma_mask(pdev, cmask) == 0) {
 		adapter->pci_using_dac = 1;
@@ -256,7 +254,7 @@ static int
 nx_update_dma_mask(struct netxen_adapter *adapter)
 {
 	int change, shift, err;
-	uint64_t mask, old_mask;
+	uint64_t mask, old_mask, old_cmask;
 	struct pci_dev *pdev = adapter->pdev;
 
 	change = 0;
@@ -272,14 +270,29 @@ nx_update_dma_mask(struct netxen_adapter *adapter)
 
 	if (change) {
 		old_mask = pdev->dma_mask;
+		old_cmask = pdev->dev.coherent_dma_mask;
+
 		mask = (1ULL<<(32+shift)) - 1;
 
 		err = pci_set_dma_mask(pdev, mask);
 		if (err)
-			return pci_set_dma_mask(pdev, old_mask);
+			goto err_out;
+
+		if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+
+			err = pci_set_consistent_dma_mask(pdev, mask);
+			if (err)
+				goto err_out;
+		}
+		dev_info(&pdev->dev, "using %d-bit dma mask\n", 32+shift);
 	}
 
 	return 0;
+
+err_out:
+	pci_set_dma_mask(pdev, old_mask);
+	pci_set_consistent_dma_mask(pdev, old_cmask);
+	return err;
 }
 
 static void netxen_check_options(struct netxen_adapter *adapter)
@@ -1006,7 +1019,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	revision_id = pdev->revision;
 	adapter->ahw.revision_id = revision_id;
 
-	err = nx_set_dma_mask(adapter, revision_id);
+	err = nx_set_dma_mask(adapter);
 	if (err)
 		goto err_out_free_netdev;
 

drivers/net/pcnet32.c

@@ -1611,8 +1611,11 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		if (pcnet32_dwio_read_csr(ioaddr, 0) == 4
 		    && pcnet32_dwio_check(ioaddr)) {
 			a = &pcnet32_dwio;
-		} else
+		} else {
+			if (pcnet32_debug & NETIF_MSG_PROBE)
+				printk(KERN_ERR PFX "No access methods\n");
 			goto err_release_region;
+		}
 	}
 
 	chip_version =
@@ -1719,7 +1722,9 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 		ret = -ENOMEM;
 		goto err_release_region;
 	}
-	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	if (pdev)
+		SET_NETDEV_DEV(dev, &pdev->dev);
 
 	if (pcnet32_debug & NETIF_MSG_PROBE)
 		printk(KERN_INFO PFX "%s at %#3lx,", chipname, ioaddr);
@@ -1818,7 +1823,6 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 
 	spin_lock_init(&lp->lock);
 
-	SET_NETDEV_DEV(dev, &pdev->dev);
 	lp->name = chipname;
 	lp->shared_irq = shared;
 	lp->tx_ring_size = TX_RING_SIZE;	/* default tx ring size */
@@ -1852,12 +1856,6 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 	    ((cards_found >= MAX_UNITS) || full_duplex[cards_found]))
 		lp->options |= PCNET32_PORT_FD;
 
-	if (!a) {
-		if (pcnet32_debug & NETIF_MSG_PROBE)
-			printk(KERN_ERR PFX "No access methods\n");
-		ret = -ENODEV;
-		goto err_free_consistent;
-	}
 	lp->a = *a;
 
 	/* prior to register_netdev, dev->name is not yet correct */
@@ -1973,14 +1971,13 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
 
 	return 0;
 
-      err_free_ring:
+err_free_ring:
 	pcnet32_free_ring(dev);
-      err_free_consistent:
 	pci_free_consistent(lp->pci_dev, sizeof(*lp->init_block),
 			    lp->init_block, lp->init_dma_addr);
-      err_free_netdev:
+err_free_netdev:
 	free_netdev(dev);
-      err_release_region:
+err_release_region:
 	release_region(ioaddr, PCNET32_TOTAL_SIZE);
 	return ret;
 }
@@ -2089,6 +2086,7 @@ static void pcnet32_free_ring(struct net_device *dev)
 static int pcnet32_open(struct net_device *dev)
 {
 	struct pcnet32_private *lp = netdev_priv(dev);
+	struct pci_dev *pdev = lp->pci_dev;
 	unsigned long ioaddr = dev->base_addr;
 	u16 val;
 	int i;
@@ -2149,9 +2147,9 @@ static int pcnet32_open(struct net_device *dev)
 	lp->a.write_csr(ioaddr, 124, val);
 
 	/* Allied Telesyn AT 2700/2701 FX are 100Mbit only and do not negotiate */
-	if (lp->pci_dev->subsystem_vendor == PCI_VENDOR_ID_AT &&
-	    (lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
-	     lp->pci_dev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
+	if (pdev && pdev->subsystem_vendor == PCI_VENDOR_ID_AT &&
+	    (pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2700FX ||
+	     pdev->subsystem_device == PCI_SUBDEVICE_ID_AT_2701FX)) {
 		if (lp->options & PCNET32_PORT_ASEL) {
 			lp->options = PCNET32_PORT_FD | PCNET32_PORT_100;
 			if (netif_msg_link(lp))

drivers/net/ppp_generic.c

@@ -1384,7 +1384,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 
 	/* create a	fragment for each channel */
 	bits = B;
-	while (nfree > 0 &&	len	> 0) {
+	while (len	> 0) {
 		list = list->next;
 		if (list ==	&ppp->channels)	{
 			i =	0;
@@ -1431,29 +1431,31 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 		*otherwise divide it according to the speed
 		*of the channel we are going to transmit on
 		*/
-		if (pch->speed == 0) {
-			flen = totlen/nfree	;
-			if (nbigger > 0) {
-				flen++;
-				nbigger--;
-			}
-		} else {
-			flen = (((totfree - nzero)*(totlen + hdrlen*totfree)) /
-				((totspeed*totfree)/pch->speed)) - hdrlen;
-			if (nbigger > 0) {
-				flen += ((totfree - nzero)*pch->speed)/totspeed;
-				nbigger -= ((totfree - nzero)*pch->speed)/
+		if (nfree > 0) {
+			if (pch->speed == 0) {
+				flen = totlen/nfree	;
+				if (nbigger > 0) {
+					flen++;
+					nbigger--;
+				}
+			} else {
+				flen = (((totfree - nzero)*(totlen + hdrlen*totfree)) /
+					((totspeed*totfree)/pch->speed)) - hdrlen;
+				if (nbigger > 0) {
+					flen += ((totfree - nzero)*pch->speed)/totspeed;
+					nbigger -= ((totfree - nzero)*pch->speed)/
 							totspeed;
+				}
 			}
+			nfree--;
 		}
-		nfree--;
 
 		/*
 		 *check	if we are on the last channel or
 		 *we exceded the lenght	of the data	to
 		 *fragment
 		 */
-		if ((nfree == 0) || (flen > len))
+		if ((nfree <= 0) || (flen > len))
 			flen = len;
 		/*
 		 *it is not worth to tx on slow channels:
@@ -1467,7 +1469,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 			continue;
 		}
 
-		mtu	= pch->chan->mtu + 2 - hdrlen;
+		mtu	= pch->chan->mtu - hdrlen;
 		if (mtu	< 4)
 			mtu	= 4;
 		if (flen > mtu)

drivers/net/pppoe.c

@@ -1063,6 +1063,7 @@ static void *pppoe_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 	else {
 		int hash = hash_item(po->pppoe_pa.sid, po->pppoe_pa.remote);
 
+		po = NULL;
 		while (++hash < PPPOE_HASH_SIZE) {
 			po = pn->hash_table[hash];
 			if (po)

drivers/net/pppol2tp.c

@@ -2680,6 +2680,7 @@ out_unregister_pppol2tp_proto:
 static void __exit pppol2tp_exit(void)
 {
 	unregister_pppox_proto(PX_PROTO_OL2TP);
+	unregister_pernet_gen_device(pppol2tp_net_id, &pppol2tp_net_ops);
 	proto_unregister(&pppol2tp_sk_proto);
 }
 

drivers/net/s6gmac.c

@@ -793,7 +793,7 @@ static inline int s6gmac_phy_start(struct net_device *dev)
 	struct s6gmac *pd = netdev_priv(dev);
 	int i = 0;
 	struct phy_device *p = NULL;
-	while ((!(p = pd->mii.bus->phy_map[i])) && (i < PHY_MAX_ADDR))
+	while ((i < PHY_MAX_ADDR) && (!(p = pd->mii.bus->phy_map[i])))
 		i++;
 	p = phy_connect(dev, dev_name(&p->dev), &s6gmac_adjust_link, 0,
 			PHY_INTERFACE_MODE_RGMII);

drivers/net/sky2.c

@@ -1488,6 +1488,8 @@ static int sky2_up(struct net_device *dev)
 	sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
 #endif
 
+	sky2->restarting = 0;
+
 	err = sky2_rx_start(sky2);
 	if (err)
 		goto err_out;
@@ -1500,6 +1502,9 @@ static int sky2_up(struct net_device *dev)
 
 	sky2_set_multicast(dev);
 
+	/* wake queue incase we are restarting */
+	netif_wake_queue(dev);
+
 	if (netif_msg_ifup(sky2))
 		printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
 	return 0;
@@ -1533,6 +1538,8 @@ static inline int tx_dist(unsigned tail, unsigned head)
 /* Number of list elements available for next tx */
 static inline int tx_avail(const struct sky2_port *sky2)
 {
+	if (unlikely(sky2->restarting))
+		return 0;
 	return sky2->tx_pending - tx_dist(sky2->tx_cons, sky2->tx_prod);
 }
 
@@ -1818,6 +1825,10 @@ static int sky2_down(struct net_device *dev)
 	if (netif_msg_ifdown(sky2))
 		printk(KERN_INFO PFX "%s: disabling interface\n", dev->name);
 
+	/* explicitly shut off tx incase we're restarting */
+	sky2->restarting = 1;
+	netif_tx_disable(dev);
+
 	/* Force flow control off */
 	sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
 
@@ -2359,7 +2370,7 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last)
 {
 	struct sky2_port *sky2 = netdev_priv(dev);
 
-	if (netif_running(dev)) {
+	if (likely(netif_running(dev) && !sky2->restarting)) {
 		netif_tx_lock(dev);
 		sky2_tx_complete(sky2, last);
 		netif_tx_unlock(dev);
@@ -4283,6 +4294,7 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
 	spin_lock_init(&sky2->phy_lock);
 	sky2->tx_pending = TX_DEF_PENDING;
 	sky2->rx_pending = RX_DEF_PENDING;
+	sky2->restarting = 0;
 
 	hw->dev[port] = dev;
 

drivers/net/sky2.h

@@ -2051,6 +2051,7 @@ struct sky2_port {
 	u8		     duplex;	/* DUPLEX_HALF, DUPLEX_FULL */
 	u8		     rx_csum;
 	u8		     wol;
+	u8		     restarting;
  	enum flow_control    flow_mode;
  	enum flow_control    flow_status;
 

drivers/net/tulip/de4x5.c

@@ -5059,7 +5059,7 @@ mii_get_phy(struct net_device *dev)
 	if ((id == 0) || (id == 65535)) continue;  /* Valid ID? */
 	for (j=0; j<limit; j++) {                  /* Search PHY table */
 	    if (id != phy_info[j].id) continue;    /* ID match? */
-	    for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++);
+	    for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
 	    if (k < DE4X5_MAX_PHY) {
 		memcpy((char *)&lp->phy[k],
 		       (char *)&phy_info[j], sizeof(struct phy_table));
@@ -5072,7 +5072,7 @@ mii_get_phy(struct net_device *dev)
 	    break;
 	}
 	if ((j == limit) && (i < DE4X5_MAX_MII)) {
-	    for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++);
+	    for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++);
 	    lp->phy[k].addr = i;
 	    lp->phy[k].id = id;
 	    lp->phy[k].spd.reg = GENERIC_REG;      /* ANLPA register         */
@@ -5091,7 +5091,7 @@ mii_get_phy(struct net_device *dev)
   purgatory:
     lp->active = 0;
     if (lp->phy[0].id) {                           /* Reset the PHY devices */
-	for (k=0; lp->phy[k].id && (k < DE4X5_MAX_PHY); k++) { /*For each PHY*/
+	for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++) { /*For each PHY*/
 	    mii_wr(MII_CR_RST, MII_CR, lp->phy[k].addr, DE4X5_MII);
 	    while (mii_rd(MII_CR, lp->phy[k].addr, DE4X5_MII) & MII_CR_RST);
 

drivers/net/wireless/airo.c

@@ -5918,20 +5918,19 @@ static int airo_set_essid(struct net_device *dev,
 	readSsidRid(local, &SSID_rid);
 
 	/* Check if we asked for `any' */
-	if(dwrq->flags == 0) {
+	if (dwrq->flags == 0) {
 		/* Just send an empty SSID list */
 		memset(&SSID_rid, 0, sizeof(SSID_rid));
 	} else {
-		int	index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+		unsigned index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
 
 		/* Check the size of the string */
-		if(dwrq->length > IW_ESSID_MAX_SIZE) {
+		if (dwrq->length > IW_ESSID_MAX_SIZE)
 			return -E2BIG ;
-		}
+
 		/* Check if index is valid */
-		if((index < 0) || (index >= 4)) {
+		if (index >= ARRAY_SIZE(SSID_rid.ssids))
 			return -EINVAL;
-		}
 
 		/* Set the SSID */
 		memset(SSID_rid.ssids[index].ssid, 0,
@@ -6819,7 +6818,7 @@ static int airo_set_txpow(struct net_device *dev,
 		return -EINVAL;
 	}
 	clear_bit (FLAG_RADIO_OFF, &local->flags);
-	for (i = 0; cap_rid.txPowerLevels[i] && (i < 8); i++)
+	for (i = 0; i < 8 && cap_rid.txPowerLevels[i]; i++)
 		if (v == cap_rid.txPowerLevels[i]) {
 			readConfigRid(local, 1);
 			local->config.txPower = v;

drivers/net/wireless/ath/ath9k/eeprom.c

@@ -460,7 +460,7 @@ static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
 		integer = swab32(eep->modalHeader.antCtrlCommon);
 		eep->modalHeader.antCtrlCommon = integer;
 
-		for (i = 0; i < AR5416_MAX_CHAINS; i++) {
+		for (i = 0; i < AR5416_EEP4K_MAX_CHAINS; i++) {
 			integer = swab32(eep->modalHeader.antCtrlChain[i]);
 			eep->modalHeader.antCtrlChain[i] = integer;
 		}
@@ -914,7 +914,7 @@ static void ath9k_hw_set_4k_power_per_rate_table(struct ath_hw *ah,
 			ctlMode, numCtlModes, isHt40CtlMode,
 			(pCtlMode[ctlMode] & EXT_ADDITIVE));
 
-		for (i = 0; (i < AR5416_NUM_CTLS) &&
+		for (i = 0; (i < AR5416_EEP4K_NUM_CTLS) &&
 				pEepData->ctlIndex[i]; i++) {
 			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
 				"  LOOP-Ctlidx %d: cfgCtl 0x%2.2x "

drivers/net/wireless/iwlwifi/iwl-3945.h

@@ -112,7 +112,7 @@ enum iwl3945_antenna {
 #define IWL_TX_FIFO_NONE	7
 
 /* Minimum number of queues. MAX_NUM is defined in hw specific files */
-#define IWL_MIN_NUM_QUEUES	4
+#define IWL39_MIN_NUM_QUEUES	4
 
 #define IEEE80211_DATA_LEN              2304
 #define IEEE80211_4ADDR_LEN             30

drivers/net/wireless/iwlwifi/iwl-core.c

@@ -1332,6 +1332,9 @@ int iwl_setup_mac(struct iwl_priv *priv)
 
 	hw->wiphy->custom_regulatory = true;
 
+	/* Firmware does not support this */
+	hw->wiphy->disable_beacon_hints = true;
+
 	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
 	/* we create the 802.11 header and a zero-length SSID element */
 	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;

drivers/net/wireless/iwlwifi/iwl-debugfs.c

@@ -308,18 +308,18 @@ static ssize_t iwl_dbgfs_nvm_read(struct file *file,
 		return -ENODATA;
 	}
 
+	ptr = priv->eeprom;
+	if (!ptr) {
+		IWL_ERR(priv, "Invalid EEPROM/OTP memory\n");
+		return -ENOMEM;
+	}
+
 	/* 4 characters for byte 0xYY */
 	buf = kzalloc(buf_size, GFP_KERNEL);
 	if (!buf) {
 		IWL_ERR(priv, "Can not allocate Buffer\n");
 		return -ENOMEM;
 	}
-
-	ptr = priv->eeprom;
-	if (!ptr) {
-		IWL_ERR(priv, "Invalid EEPROM/OTP memory\n");
-		return -ENOMEM;
-	}
 	pos += scnprintf(buf + pos, buf_size - pos, "NVM Type: %s\n",
 			(priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
 			? "OTP" : "EEPROM");

drivers/net/wireless/iwlwifi/iwl-dev.h

@@ -258,8 +258,10 @@ struct iwl_channel_info {
 #define IWL_TX_FIFO_HCCA_2	6
 #define IWL_TX_FIFO_NONE	7
 
-/* Minimum number of queues. MAX_NUM is defined in hw specific files */
-#define IWL_MIN_NUM_QUEUES	4
+/* Minimum number of queues. MAX_NUM is defined in hw specific files.
+ * Set the minimum to accommodate the 4 standard TX queues, 1 command
+ * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
+#define IWL_MIN_NUM_QUEUES	10
 
 /* Power management (not Tx power) structures */
 

drivers/net/wireless/iwlwifi/iwl-sta.c

@@ -566,6 +566,8 @@ int iwl_remove_default_wep_key(struct iwl_priv *priv,
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->sta_lock, flags);
+	IWL_DEBUG_WEP(priv, "Removing default WEP key: idx=%d\n",
+		      keyconf->keyidx);
 
 	if (!test_and_clear_bit(keyconf->keyidx, &priv->ucode_key_table))
 		IWL_ERR(priv, "index %d not used in uCode key table.\n",
@@ -573,6 +575,11 @@ int iwl_remove_default_wep_key(struct iwl_priv *priv,
 
 	priv->default_wep_key--;
 	memset(&priv->wep_keys[keyconf->keyidx], 0, sizeof(priv->wep_keys[0]));
+	if (iwl_is_rfkill(priv)) {
+		IWL_DEBUG_WEP(priv, "Not sending REPLY_WEPKEY command due to RFKILL.\n");
+		spin_unlock_irqrestore(&priv->sta_lock, flags);
+		return 0;
+	}
 	ret = iwl_send_static_wepkey_cmd(priv, 1);
 	IWL_DEBUG_WEP(priv, "Remove default WEP key: idx=%d ret=%d\n",
 		      keyconf->keyidx, ret);
@@ -853,6 +860,11 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv,
 	priv->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
 	priv->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
 
+	if (iwl_is_rfkill(priv)) {
+		IWL_DEBUG_WEP(priv, "Not sending REPLY_ADD_STA command because RFKILL enabled. \n");
+		spin_unlock_irqrestore(&priv->sta_lock, flags);
+		return 0;
+	}
 	ret =  iwl_send_add_sta(priv, &priv->stations[sta_id].sta, CMD_ASYNC);
 	spin_unlock_irqrestore(&priv->sta_lock, flags);
 	return ret;

drivers/net/wireless/iwlwifi/iwl-tx.c

@@ -720,8 +720,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 		goto drop_unlock;
 	}
 
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	hdr_len = ieee80211_hdrlen(fc);
 
 	/* Find (or create) index into station table for destination station */
@@ -729,7 +727,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	if (sta_id == IWL_INVALID_STATION) {
 		IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n",
 			       hdr->addr1);
-		goto drop;
+		goto drop_unlock;
 	}
 
 	IWL_DEBUG_TX(priv, "station Id %d\n", sta_id);
@@ -750,14 +748,17 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 			txq_id = priv->stations[sta_id].tid[tid].agg.txq_id;
 			swq_id = iwl_virtual_agg_queue_num(swq_id, txq_id);
 		}
-		priv->stations[sta_id].tid[tid].tfds_in_queue++;
 	}
 
 	txq = &priv->txq[txq_id];
 	q = &txq->q;
 	txq->swq_id = swq_id;
 
-	spin_lock_irqsave(&priv->lock, flags);
+	if (unlikely(iwl_queue_space(q) < q->high_mark))
+		goto drop_unlock;
+
+	if (ieee80211_is_data_qos(fc))
+		priv->stations[sta_id].tid[tid].tfds_in_queue++;
 
 	/* Set up driver data for this TFD */
 	memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct iwl_tx_info));
@@ -902,7 +903,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 
 drop_unlock:
 	spin_unlock_irqrestore(&priv->lock, flags);
-drop:
 	return -1;
 }
 EXPORT_SYMBOL(iwl_tx_skb);
@@ -1171,6 +1171,8 @@ int iwl_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn)
 		IWL_ERR(priv, "Start AGG on invalid station\n");
 		return -ENXIO;
 	}
+	if (unlikely(tid >= MAX_TID_COUNT))
+		return -EINVAL;
 
 	if (priv->stations[sta_id].tid[tid].agg.state != IWL_AGG_OFF) {
 		IWL_ERR(priv, "Start AGG when state is not IWL_AGG_OFF !\n");

drivers/net/wireless/iwlwifi/iwl3945-base.c

@@ -3968,6 +3968,9 @@ static int iwl3945_setup_mac(struct iwl_priv *priv)
 
 	hw->wiphy->custom_regulatory = true;
 
+	/* Firmware does not support this */
+	hw->wiphy->disable_beacon_hints = true;
+
 	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
 	/* we create the 802.11 header and a zero-length SSID element */
 	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
@@ -4018,10 +4021,10 @@ static int iwl3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e
 	SET_IEEE80211_DEV(hw, &pdev->dev);
 
 	if ((iwl3945_mod_params.num_of_queues > IWL39_MAX_NUM_QUEUES) ||
-	     (iwl3945_mod_params.num_of_queues < IWL_MIN_NUM_QUEUES)) {
+	     (iwl3945_mod_params.num_of_queues < IWL39_MIN_NUM_QUEUES)) {
 		IWL_ERR(priv,
 			"invalid queues_num, should be between %d and %d\n",
-			IWL_MIN_NUM_QUEUES, IWL39_MAX_NUM_QUEUES);
+			IWL39_MIN_NUM_QUEUES, IWL39_MAX_NUM_QUEUES);
 		err = -EINVAL;
 		goto out_ieee80211_free_hw;
 	}

drivers/net/wireless/iwmc3200wifi/commands.c

@@ -220,6 +220,7 @@ int iwm_store_rxiq_calib_result(struct iwm_priv *iwm)
 	eeprom_rxiq = iwm_eeprom_access(iwm, IWM_EEPROM_CALIB_RXIQ);
 	if (IS_ERR(eeprom_rxiq)) {
 		IWM_ERR(iwm, "Couldn't access EEPROM RX IQ entry\n");
+		kfree(rxiq);
 		return PTR_ERR(eeprom_rxiq);
 	}
 

drivers/net/wireless/iwmc3200wifi/netdev.c

@@ -106,10 +106,8 @@ void *iwm_if_alloc(int sizeof_bus, struct device *dev,
 	int ret = 0;
 
 	wdev = iwm_wdev_alloc(sizeof_bus, dev);
-	if (!wdev) {
-		dev_err(dev, "no memory for wireless device instance\n");
-		return ERR_PTR(-ENOMEM);
-	}
+	if (IS_ERR(wdev))
+		return wdev;
 
 	iwm = wdev_to_iwm(wdev);
 	iwm->bus_ops = if_ops;

drivers/net/wireless/libertas/11d.c

@@ -47,7 +47,7 @@ static u8 lbs_region_2_code(u8 *region)
 {
 	u8 i;
 
-	for (i = 0; region[i] && i < COUNTRY_CODE_LEN; i++)
+	for (i = 0; i < COUNTRY_CODE_LEN && region[i]; i++)
 		region[i] = toupper(region[i]);
 
 	for (i = 0; i < ARRAY_SIZE(region_code_mapping); i++) {

drivers/net/wireless/libertas/assoc.c

@@ -1,6 +1,7 @@
 /* Copyright (C) 2006, Red Hat, Inc. */
 
 #include <linux/types.h>
+#include <linux/kernel.h>
 #include <linux/etherdevice.h>
 #include <linux/ieee80211.h>
 #include <linux/if_arp.h>
@@ -43,21 +44,21 @@ static int get_common_rates(struct lbs_private *priv,
 	u16 *rates_size)
 {
 	u8 *card_rates = lbs_bg_rates;
-	size_t num_card_rates = sizeof(lbs_bg_rates);
 	int ret = 0, i, j;
-	u8 tmp[30];
+	u8 tmp[(ARRAY_SIZE(lbs_bg_rates) - 1) * (*rates_size - 1)];
 	size_t tmp_size = 0;
 
 	/* For each rate in card_rates that exists in rate1, copy to tmp */
-	for (i = 0; card_rates[i] && (i < num_card_rates); i++) {
-		for (j = 0; rates[j] && (j < *rates_size); j++) {
+	for (i = 0; i < ARRAY_SIZE(lbs_bg_rates) && card_rates[i]; i++) {
+		for (j = 0; j < *rates_size && rates[j]; j++) {
 			if (rates[j] == card_rates[i])
 				tmp[tmp_size++] = card_rates[i];
 		}
 	}
 
 	lbs_deb_hex(LBS_DEB_JOIN, "AP rates    ", rates, *rates_size);
-	lbs_deb_hex(LBS_DEB_JOIN, "card rates  ", card_rates, num_card_rates);
+	lbs_deb_hex(LBS_DEB_JOIN, "card rates  ", card_rates,
+			ARRAY_SIZE(lbs_bg_rates));
 	lbs_deb_hex(LBS_DEB_JOIN, "common rates", tmp, tmp_size);
 	lbs_deb_join("TX data rate 0x%02x\n", priv->cur_rate);
 
@@ -69,10 +70,7 @@ static int get_common_rates(struct lbs_private *priv,
 		lbs_pr_alert("Previously set fixed data rate %#x isn't "
 		       "compatible with the network.\n", priv->cur_rate);
 		ret = -1;
-		goto done;
 	}
-	ret = 0;
-
 done:
 	memset(rates, 0, *rates_size);
 	*rates_size = min_t(int, tmp_size, *rates_size);
@@ -322,7 +320,7 @@ static int lbs_associate(struct lbs_private *priv,
 	rates = (struct mrvl_ie_rates_param_set *) pos;
 	rates->header.type = cpu_to_le16(TLV_TYPE_RATES);
 	memcpy(&rates->rates, &bss->rates, MAX_RATES);
-	tmplen = MAX_RATES;
+	tmplen = min_t(u16, ARRAY_SIZE(rates->rates), MAX_RATES);
 	if (get_common_rates(priv, rates->rates, &tmplen)) {
 		ret = -1;
 		goto done;
@@ -598,7 +596,7 @@ static int lbs_adhoc_join(struct lbs_private *priv,
 
 	/* Copy Data rates from the rates recorded in scan response */
 	memset(cmd.bss.rates, 0, sizeof(cmd.bss.rates));
-	ratesize = min_t(u16, sizeof(cmd.bss.rates), MAX_RATES);
+	ratesize = min_t(u16, ARRAY_SIZE(cmd.bss.rates), MAX_RATES);
 	memcpy(cmd.bss.rates, bss->rates, ratesize);
 	if (get_common_rates(priv, cmd.bss.rates, &ratesize)) {
 		lbs_deb_join("ADHOC_JOIN: get_common_rates returned error.\n");

drivers/net/wireless/libertas/scan.c

@@ -5,6 +5,7 @@
   *  for sending scan commands to the firmware.
   */
 #include <linux/types.h>
+#include <linux/kernel.h>
 #include <linux/etherdevice.h>
 #include <linux/if_arp.h>
 #include <asm/unaligned.h>
@@ -876,7 +877,7 @@ static inline char *lbs_translate_scan(struct lbs_private *priv,
 	iwe.u.bitrate.disabled = 0;
 	iwe.u.bitrate.value = 0;
 
-	for (j = 0; bss->rates[j] && (j < sizeof(bss->rates)); j++) {
+	for (j = 0; j < ARRAY_SIZE(bss->rates) && bss->rates[j]; j++) {
 		/* Bit rate given in 500 kb/s units */
 		iwe.u.bitrate.value = bss->rates[j] * 500000;
 		current_val = iwe_stream_add_value(info, start, current_val,

drivers/net/wireless/zd1211rw/zd_mac.c

@@ -698,7 +698,7 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length)
 			&& !mac->pass_ctrl)
 		return 0;
 
-	fc = *(__le16 *)buffer;
+	fc = get_unaligned((__le16*)buffer);
 	need_padding = ieee80211_is_data_qos(fc) ^ ieee80211_has_a4(fc);
 
 	skb = dev_alloc_skb(length + (need_padding ? 2 : 0));

drivers/scsi/scsi_transport_iscsi.c

@@ -990,7 +990,7 @@ int iscsi_offload_mesg(struct Scsi_Host *shost,
 	struct iscsi_uevent *ev;
 	int len = NLMSG_SPACE(sizeof(*ev) + data_size);
 
-	skb = alloc_skb(len, GFP_NOIO);
+	skb = alloc_skb(len, GFP_ATOMIC);
 	if (!skb) {
 		printk(KERN_ERR "can not deliver iscsi offload message:OOM\n");
 		return -ENOMEM;
@@ -1012,7 +1012,7 @@ int iscsi_offload_mesg(struct Scsi_Host *shost,
 
 	memcpy((char *)ev + sizeof(*ev), data, data_size);
 
-	return iscsi_multicast_skb(skb, ISCSI_NL_GRP_UIP, GFP_NOIO);
+	return iscsi_multicast_skb(skb, ISCSI_NL_GRP_UIP, GFP_ATOMIC);
 }
 EXPORT_SYMBOL_GPL(iscsi_offload_mesg);
 

include/linux/inetdevice.h

@@ -82,7 +82,7 @@ static inline void ipv4_devconf_setall(struct in_device *in_dev)
 
 #define IN_DEV_FORWARD(in_dev)		IN_DEV_CONF_GET((in_dev), FORWARDING)
 #define IN_DEV_MFORWARD(in_dev)		IN_DEV_ANDCONF((in_dev), MC_FORWARDING)
-#define IN_DEV_RPFILTER(in_dev)		IN_DEV_ANDCONF((in_dev), RP_FILTER)
+#define IN_DEV_RPFILTER(in_dev)		IN_DEV_MAXCONF((in_dev), RP_FILTER)
 #define IN_DEV_SOURCE_ROUTE(in_dev)	IN_DEV_ANDCONF((in_dev), \
 						       ACCEPT_SOURCE_ROUTE)
 #define IN_DEV_BOOTP_RELAY(in_dev)	IN_DEV_ANDCONF((in_dev), BOOTP_RELAY)

include/net/bluetooth/rfcomm.h

@@ -355,7 +355,17 @@ struct rfcomm_dev_list_req {
 };
 
 int  rfcomm_dev_ioctl(struct sock *sk, unsigned int cmd, void __user *arg);
+
+#ifdef CONFIG_BT_RFCOMM_TTY
 int  rfcomm_init_ttys(void);
 void rfcomm_cleanup_ttys(void);
-
+#else
+static inline int rfcomm_init_ttys(void)
+{
+	return 0;
+}
+static inline void rfcomm_cleanup_ttys(void)
+{
+}
+#endif
 #endif /* __RFCOMM_H */

include/net/cfg80211.h

@@ -979,6 +979,10 @@ struct cfg80211_ops {
  * 	channels at a later time. This can be used for devices which do not
  * 	have calibration information gauranteed for frequencies or settings
  * 	outside of its regulatory domain.
+ * @disable_beacon_hints: enable this if your driver needs to ensure that
+ *	passive scan flags and beaconing flags may not be lifted by cfg80211
+ *	due to regulatory beacon hints. For more information on beacon
+ *	hints read the documenation for regulatory_hint_found_beacon()
  * @reg_notifier: the driver's regulatory notification callback
  * @regd: the driver's regulatory domain, if one was requested via
  * 	the regulatory_hint() API. This can be used by the driver
@@ -1004,6 +1008,7 @@ struct wiphy {
 
 	bool custom_regulatory;
 	bool strict_regulatory;
+	bool disable_beacon_hints;
 
 	enum cfg80211_signal_type signal_type;
 

net/bluetooth/rfcomm/core.c

@@ -2080,28 +2080,41 @@ static CLASS_ATTR(rfcomm_dlc, S_IRUGO, rfcomm_dlc_sysfs_show, NULL);
 /* ---- Initialization ---- */
 static int __init rfcomm_init(void)
 {
+	int ret;
+
 	l2cap_load();
 
 	hci_register_cb(&rfcomm_cb);
 
 	rfcomm_thread = kthread_run(rfcomm_run, NULL, "krfcommd");
 	if (IS_ERR(rfcomm_thread)) {
-		hci_unregister_cb(&rfcomm_cb);
-		return PTR_ERR(rfcomm_thread);
+		ret = PTR_ERR(rfcomm_thread);
+		goto out_thread;
 	}
 
 	if (class_create_file(bt_class, &class_attr_rfcomm_dlc) < 0)
 		BT_ERR("Failed to create RFCOMM info file");
 
-	rfcomm_init_sockets();
+	ret = rfcomm_init_ttys();
+	if (ret)
+		goto out_tty;
 
-#ifdef CONFIG_BT_RFCOMM_TTY
-	rfcomm_init_ttys();
-#endif
+	ret = rfcomm_init_sockets();
+	if (ret)
+		goto out_sock;
 
 	BT_INFO("RFCOMM ver %s", VERSION);
 
 	return 0;
+
+out_sock:
+	rfcomm_cleanup_ttys();
+out_tty:
+	kthread_stop(rfcomm_thread);
+out_thread:
+	hci_unregister_cb(&rfcomm_cb);
+
+	return ret;
 }
 
 static void __exit rfcomm_exit(void)
@@ -2112,9 +2125,7 @@ static void __exit rfcomm_exit(void)
 
 	kthread_stop(rfcomm_thread);
 
-#ifdef CONFIG_BT_RFCOMM_TTY
 	rfcomm_cleanup_ttys();
-#endif
 
 	rfcomm_cleanup_sockets();
 }

net/bluetooth/rfcomm/sock.c

@@ -1132,7 +1132,7 @@ error:
 	return err;
 }
 
-void __exit rfcomm_cleanup_sockets(void)
+void rfcomm_cleanup_sockets(void)
 {
 	class_remove_file(bt_class, &class_attr_rfcomm);
 

net/core/dev.c

@@ -3865,10 +3865,12 @@ int dev_unicast_delete(struct net_device *dev, void *addr)
 
 	ASSERT_RTNL();
 
+	netif_addr_lock_bh(dev);
 	err = __hw_addr_del(&dev->uc, addr, dev->addr_len,
 			    NETDEV_HW_ADDR_T_UNICAST);
 	if (!err)
 		__dev_set_rx_mode(dev);
+	netif_addr_unlock_bh(dev);
 	return err;
 }
 EXPORT_SYMBOL(dev_unicast_delete);
@@ -3889,10 +3891,12 @@ int dev_unicast_add(struct net_device *dev, void *addr)
 
 	ASSERT_RTNL();
 
+	netif_addr_lock_bh(dev);
 	err = __hw_addr_add(&dev->uc, addr, dev->addr_len,
 			    NETDEV_HW_ADDR_T_UNICAST);
 	if (!err)
 		__dev_set_rx_mode(dev);
+	netif_addr_unlock_bh(dev);
 	return err;
 }
 EXPORT_SYMBOL(dev_unicast_add);
@@ -3949,7 +3953,8 @@ void __dev_addr_unsync(struct dev_addr_list **to, int *to_count,
  *	@from: source device
  *
  *	Add newly added addresses to the destination device and release
- *	addresses that have no users left.
+ *	addresses that have no users left. The source device must be
+ *	locked by netif_tx_lock_bh.
  *
  *	This function is intended to be called from the dev->set_rx_mode
  *	function of layered software devices.
@@ -3958,14 +3963,14 @@ int dev_unicast_sync(struct net_device *to, struct net_device *from)
 {
 	int err = 0;
 
-	ASSERT_RTNL();
-
 	if (to->addr_len != from->addr_len)
 		return -EINVAL;
 
+	netif_addr_lock_bh(to);
 	err = __hw_addr_sync(&to->uc, &from->uc, to->addr_len);
 	if (!err)
 		__dev_set_rx_mode(to);
+	netif_addr_unlock_bh(to);
 	return err;
 }
 EXPORT_SYMBOL(dev_unicast_sync);
@@ -3981,28 +3986,30 @@ EXPORT_SYMBOL(dev_unicast_sync);
  */
 void dev_unicast_unsync(struct net_device *to, struct net_device *from)
 {
-	ASSERT_RTNL();
-
 	if (to->addr_len != from->addr_len)
 		return;
 
+	netif_addr_lock_bh(from);
+	netif_addr_lock(to);
 	__hw_addr_unsync(&to->uc, &from->uc, to->addr_len);
 	__dev_set_rx_mode(to);
+	netif_addr_unlock(to);
+	netif_addr_unlock_bh(from);
 }
 EXPORT_SYMBOL(dev_unicast_unsync);
 
 static void dev_unicast_flush(struct net_device *dev)
 {
-	/* rtnl_mutex must be held here */
-
+	netif_addr_lock_bh(dev);
 	__hw_addr_flush(&dev->uc);
+	netif_addr_unlock_bh(dev);
 }
 
 static void dev_unicast_init(struct net_device *dev)
 {
-	/* rtnl_mutex must be held here */
-
+	netif_addr_lock_bh(dev);
 	__hw_addr_init(&dev->uc);
+	netif_addr_unlock_bh(dev);
 }
 
 

net/core/net_namespace.c

@@ -488,7 +488,7 @@ int net_assign_generic(struct net *net, int id, void *data)
 	 */
 
 	ng->len = id;
-	memcpy(&ng->ptr, &old_ng->ptr, old_ng->len);
+	memcpy(&ng->ptr, &old_ng->ptr, old_ng->len * sizeof(void*));
 
 	rcu_assign_pointer(net->gen, ng);
 	call_rcu(&old_ng->rcu, net_generic_release);

net/ipv4/arp.c

@@ -1304,7 +1304,9 @@ static void arp_format_neigh_entry(struct seq_file *seq,
 		hbuffer[k++] = hex_asc_lo(n->ha[j]);
 		hbuffer[k++] = ':';
 	}
-	hbuffer[--k] = 0;
+	if (k != 0)
+		--k;
+	hbuffer[k] = 0;
 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
 	}
 #endif

net/mac80211/mlme.c

@@ -721,7 +721,7 @@ void ieee80211_dynamic_ps_timer(unsigned long data)
 {
 	struct ieee80211_local *local = (void *) data;
 
-	if (local->quiescing)
+	if (local->quiescing || local->suspended)
 		return;
 
 	queue_work(local->hw.workqueue, &local->dynamic_ps_enable_work);

net/mac80211/pm.c

@@ -55,15 +55,6 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
 
 	rcu_read_unlock();
 
-	/* flush again, in case driver queued work */
-	flush_workqueue(local->hw.workqueue);
-
-	/* stop hardware - this must stop RX */
-	if (local->open_count) {
-		ieee80211_led_radio(local, false);
-		drv_stop(local);
-	}
-
 	/* remove STAs */
 	spin_lock_irqsave(&local->sta_lock, flags);
 	list_for_each_entry(sta, &local->sta_list, list) {
@@ -111,7 +102,22 @@ int __ieee80211_suspend(struct ieee80211_hw *hw)
 		drv_remove_interface(local, &conf);
 	}
 
+	/* stop hardware - this must stop RX */
+	if (local->open_count) {
+		ieee80211_led_radio(local, false);
+		drv_stop(local);
+	}
+
+	/*
+	 * flush again, in case driver queued work -- it
+	 * shouldn't be doing (or cancel everything in the
+	 * stop callback) that but better safe than sorry.
+	 */
+	flush_workqueue(local->hw.workqueue);
+
 	local->suspended = true;
+	/* need suspended to be visible before quiescing is false */
+	barrier();
 	local->quiescing = false;
 
 	return 0;

net/mac80211/rx.c

@@ -2453,6 +2453,18 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
 		return;
 	}
 
+	/*
+	 * If we're suspending, it is possible although not too likely
+	 * that we'd be receiving frames after having already partially
+	 * quiesced the stack. We can't process such frames then since
+	 * that might, for example, cause stations to be added or other
+	 * driver callbacks be invoked.
+	 */
+	if (unlikely(local->quiescing || local->suspended)) {
+		kfree_skb(skb);
+		return;
+	}
+
 	if (status->flag & RX_FLAG_HT) {
 		/* rate_idx is MCS index */
 		if (WARN_ON(status->rate_idx < 0 ||

net/netlabel/netlabel_kapi.c

@@ -151,7 +151,7 @@ int netlbl_cfg_unlbl_map_add(const char *domain,
 			addr6 = addr;
 			mask6 = mask;
 			map6 = kzalloc(sizeof(*map6), GFP_ATOMIC);
-			if (map4 == NULL)
+			if (map6 == NULL)
 				goto cfg_unlbl_map_add_failure;
 			map6->type = NETLBL_NLTYPE_UNLABELED;
 			ipv6_addr_copy(&map6->list.addr, addr6);

net/wireless/reg.c

@@ -1089,17 +1089,18 @@ static void handle_reg_beacon(struct wiphy *wiphy,
 
 	chan->beacon_found = true;
 
+	if (wiphy->disable_beacon_hints)
+		return;
+
 	chan_before.center_freq = chan->center_freq;
 	chan_before.flags = chan->flags;
 
-	if ((chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
-	    !(chan->orig_flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
+	if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN) {
 		chan->flags &= ~IEEE80211_CHAN_PASSIVE_SCAN;
 		channel_changed = true;
 	}
 
-	if ((chan->flags & IEEE80211_CHAN_NO_IBSS) &&
-	    !(chan->orig_flags & IEEE80211_CHAN_NO_IBSS)) {
+	if (chan->flags & IEEE80211_CHAN_NO_IBSS) {
 		chan->flags &= ~IEEE80211_CHAN_NO_IBSS;
 		channel_changed = true;
 	}

net/wireless/reg.h

@@ -30,7 +30,8 @@ int set_regdom(const struct ieee80211_regdomain *rd);
  * non-radar 5 GHz channels.
  *
  * Drivers do not need to call this, cfg80211 will do it for after a scan
- * on a newly found BSS.
+ * on a newly found BSS. If you cannot make use of this feature you can
+ * set the wiphy->disable_beacon_hints to true.
  */
 int regulatory_hint_found_beacon(struct wiphy *wiphy,
 					struct ieee80211_channel *beacon_chan,

net/wireless/scan.c

@@ -118,7 +118,7 @@ static int cmp_ies(u8 num, u8 *ies1, size_t len1, u8 *ies2, size_t len2)
 
 	if (!ie1 && !ie2)
 		return 0;
-	if (!ie1)
+	if (!ie1 || !ie2)
 		return -1;
 
 	r = memcmp(ie1 + 2, ie2 + 2, min(ie1[1], ie2[1]));
@@ -171,6 +171,8 @@ static bool is_mesh(struct cfg80211_bss *a,
 	ie = find_ie(WLAN_EID_MESH_CONFIG,
 		     a->information_elements,
 		     a->len_information_elements);
+	if (!ie)
+		return false;
 	if (ie[1] != IEEE80211_MESH_CONFIG_LEN)
 		return false;