Merge nommu tree

arch/arm/Kconfig

@@ -72,6 +72,14 @@ config FIQ
 config ARCH_MTD_XIP
 	bool
 
+config VECTORS_BASE
+	hex
+	default 0xffff0000 if MMU
+	default DRAM_BASE if REMAP_VECTORS_TO_RAM
+	default 0x00000000
+	help
+	  The base address of exception vectors.
+
 source "init/Kconfig"
 
 menu "System Type"

arch/arm/Kconfig-nommu

@@ -0,0 +1,44 @@
+#
+# Kconfig for uClinux(non-paged MM) depend configurations
+# Hyok S. Choi <hyok.choi@samsung.com>
+# 
+
+config SET_MEM_PARAM
+	bool "Set flash/sdram size and base addr"
+	help
+	 Say Y to manually set the base addresses and sizes.
+	 otherwise, the default values are assigned.
+
+config DRAM_BASE
+	hex '(S)DRAM Base Address' if SET_MEM_PARAM
+	default 0x00800000
+
+config DRAM_SIZE
+	hex '(S)DRAM SIZE' if SET_MEM_PARAM
+	default 0x00800000
+
+config FLASH_MEM_BASE
+	hex 'FLASH Base Address' if SET_MEM_PARAM
+	default 0x00400000
+
+config FLASH_SIZE
+	hex 'FLASH Size' if SET_MEM_PARAM
+	default 0x00400000
+
+config REMAP_VECTORS_TO_RAM
+	bool 'Install vectors to the begining of RAM' if DRAM_BASE
+	depends on DRAM_BASE
+	help
+	  The kernel needs to change the hardware exception vectors.
+	  In nommu mode, the hardware exception vectors are normally
+	  placed at address 0x00000000. However, this region may be
+	  occupied by read-only memory depending on H/W design.
+
+	  If the region contains read-write memory, say 'n' here.
+
+	  If your CPU provides a remap facility which allows the exception
+	  vectors to be mapped to writable memory, say 'n' here.
+
+	  Otherwise, say 'y' here.  In this case, the kernel will require
+	  external support to redirect the hardware exception vectors to
+	  the writable versions located at DRAM_BASE.

arch/arm/Makefile

@@ -20,6 +20,11 @@ GZFLAGS		:=-9
 # Select a platform tht is kept up-to-date
 KBUILD_DEFCONFIG := versatile_defconfig
 
+# defines filename extension depending memory manement type.
+ifeq ($(CONFIG_MMU),)
+MMUEXT		:= -nommu
+endif
+
 ifeq ($(CONFIG_FRAME_POINTER),y)
 CFLAGS		+=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
 endif
@@ -73,7 +78,7 @@ AFLAGS		+=$(CFLAGS_ABI) $(arch-y) $(tune-y) -msoft-float
 CHECKFLAGS	+= -D__arm__
 
 #Default value
-head-y		:= arch/arm/kernel/head.o arch/arm/kernel/init_task.o
+head-y		:= arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
 textofs-y	:= 0x00008000
 
  machine-$(CONFIG_ARCH_RPC)	   := rpc
@@ -133,7 +138,7 @@ else
 MACHINE  :=
 endif
   
-export	TEXT_OFFSET GZFLAGS
+export	TEXT_OFFSET GZFLAGS MMUEXT
 
 # Do we have FASTFPE?
 FASTFPE		:=arch/arm/fastfpe

arch/arm/boot/compressed/head.S

@@ -2,6 +2,7 @@
  *  linux/arch/arm/boot/compressed/head.S
  *
  *  Copyright (C) 1996-2002 Russell King
+ *  Copyright (C) 2004 Hyok S. Choi (MPU support)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -320,6 +321,62 @@ params:		ldr	r0, =params_phys
 cache_on:	mov	r3, #8			@ cache_on function
 		b	call_cache_fn
 
+/*
+ * Initialize the highest priority protection region, PR7
+ * to cover all 32bit address and cacheable and bufferable.
+ */
+__armv4_mpu_cache_on:
+		mov	r0, #0x3f		@ 4G, the whole
+		mcr	p15, 0, r0, c6, c7, 0	@ PR7 Area Setting
+		mcr 	p15, 0, r0, c6, c7, 1
+
+		mov	r0, #0x80		@ PR7
+		mcr	p15, 0, r0, c2, c0, 0	@ D-cache on
+		mcr	p15, 0, r0, c2, c0, 1	@ I-cache on
+		mcr	p15, 0, r0, c3, c0, 0	@ write-buffer on
+
+		mov	r0, #0xc000
+		mcr	p15, 0, r0, c5, c0, 1	@ I-access permission
+		mcr	p15, 0, r0, c5, c0, 0	@ D-access permission
+
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
+		mcr	p15, 0, r0, c7, c5, 0	@ flush(inval) I-Cache
+		mcr	p15, 0, r0, c7, c6, 0	@ flush(inval) D-Cache
+		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+						@ ...I .... ..D. WC.M
+		orr	r0, r0, #0x002d		@ .... .... ..1. 11.1
+		orr	r0, r0, #0x1000		@ ...1 .... .... ....
+
+		mcr	p15, 0, r0, c1, c0, 0	@ write control reg
+
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c5, 0	@ flush(inval) I-Cache
+		mcr	p15, 0, r0, c7, c6, 0	@ flush(inval) D-Cache
+		mov	pc, lr
+
+__armv3_mpu_cache_on:
+		mov	r0, #0x3f		@ 4G, the whole
+		mcr	p15, 0, r0, c6, c7, 0	@ PR7 Area Setting
+
+		mov	r0, #0x80		@ PR7
+		mcr	p15, 0, r0, c2, c0, 0	@ cache on
+		mcr	p15, 0, r0, c3, c0, 0	@ write-buffer on
+
+		mov	r0, #0xc000
+		mcr	p15, 0, r0, c5, c0, 0	@ access permission
+
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
+		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
+						@ .... .... .... WC.M
+		orr	r0, r0, #0x000d		@ .... .... .... 11.1
+		mov	r0, #0
+		mcr	p15, 0, r0, c1, c0, 0	@ write control reg
+
+		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
+		mov	pc, lr
+
 __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		bic	r3, r3, #0xff		@ Align the pointer
 		bic	r3, r3, #0x3f00
@@ -496,6 +553,18 @@ proc_types:
 		b	__armv4_mmu_cache_off
 		mov	pc, lr
 
+		.word	0x41007400		@ ARM74x
+		.word	0xff00ff00
+		b	__armv3_mpu_cache_on
+		b	__armv3_mpu_cache_off
+		b	__armv3_mpu_cache_flush
+		
+		.word	0x41009400		@ ARM94x
+		.word	0xff00ff00
+		b	__armv4_mpu_cache_on
+		b	__armv4_mpu_cache_off
+		b	__armv4_mpu_cache_flush
+
 		.word	0x00007000		@ ARM7 IDs
 		.word	0x0000f000
 		mov	pc, lr
@@ -562,6 +631,24 @@ proc_types:
 cache_off:	mov	r3, #12			@ cache_off function
 		b	call_cache_fn
 
+__armv4_mpu_cache_off:
+		mrc	p15, 0, r0, c1, c0
+		bic	r0, r0, #0x000d
+		mcr	p15, 0, r0, c1, c0	@ turn MPU and cache off
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c10, 4	@ drain write buffer
+		mcr	p15, 0, r0, c7, c6, 0	@ flush D-Cache
+		mcr	p15, 0, r0, c7, c5, 0	@ flush I-Cache
+		mov	pc, lr
+
+__armv3_mpu_cache_off:
+		mrc	p15, 0, r0, c1, c0
+		bic	r0, r0, #0x000d
+		mcr	p15, 0, r0, c1, c0, 0	@ turn MPU and cache off
+		mov	r0, #0
+		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
+		mov	pc, lr
+
 __armv4_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
 		bic	r0, r0, #0x000d
@@ -601,6 +688,24 @@ cache_clean_flush:
 		mov	r3, #16
 		b	call_cache_fn
 
+__armv4_mpu_cache_flush:
+		mov	r2, #1
+		mov	r3, #0
+		mcr	p15, 0, ip, c7, c6, 0	@ invalidate D cache
+		mov	r1, #7 << 5		@ 8 segments
+1:		orr	r3, r1, #63 << 26	@ 64 entries
+2:		mcr	p15, 0, r3, c7, c14, 2	@ clean & invalidate D index
+		subs	r3, r3, #1 << 26
+		bcs	2b			@ entries 63 to 0
+		subs 	r1, r1, #1 << 5
+		bcs	1b			@ segments 7 to 0
+
+		teq	r2, #0
+		mcrne	p15, 0, ip, c7, c5, 0	@ invalidate I cache
+		mcr	p15, 0, ip, c7, c10, 4	@ drain WB
+		mov	pc, lr
+		
+
 __armv6_mmu_cache_flush:
 		mov	r1, #0
 		mcr	p15, 0, r1, c7, c14, 0	@ clean+invalidate D
@@ -638,6 +743,7 @@ no_cache_id:
 		mov	pc, lr
 
 __armv3_mmu_cache_flush:
+__armv3_mpu_cache_flush:
 		mov	r1, #0
 		mcr	p15, 0, r0, c7, c0, 0	@ invalidate whole cache v3
 		mov	pc, lr

arch/arm/kernel/head-common.S

@@ -0,0 +1,217 @@
+/*
+ *  linux/arch/arm/kernel/head-common.S
+ *
+ *  Copyright (C) 1994-2002 Russell King
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+	.type	__switch_data, %object
+__switch_data:
+	.long	__mmap_switched
+	.long	__data_loc			@ r4
+	.long	__data_start			@ r5
+	.long	__bss_start			@ r6
+	.long	_end				@ r7
+	.long	processor_id			@ r4
+	.long	__machine_arch_type		@ r5
+	.long	cr_alignment			@ r6
+	.long	init_thread_union + THREAD_START_SP @ sp
+
+/*
+ * The following fragment of code is executed with the MMU on in MMU mode,
+ * and uses absolute addresses; this is not position independent.
+ *
+ *  r0  = cp#15 control register
+ *  r1  = machine ID
+ *  r9  = processor ID
+ */
+	.type	__mmap_switched, %function
+__mmap_switched:
+	adr	r3, __switch_data + 4
+
+	ldmia	r3!, {r4, r5, r6, r7}
+	cmp	r4, r5				@ Copy data segment if needed
+1:	cmpne	r5, r6
+	ldrne	fp, [r4], #4
+	strne	fp, [r5], #4
+	bne	1b
+
+	mov	fp, #0				@ Clear BSS (and zero fp)
+1:	cmp	r6, r7
+	strcc	fp, [r6],#4
+	bcc	1b
+
+	ldmia	r3, {r4, r5, r6, sp}
+	str	r9, [r4]			@ Save processor ID
+	str	r1, [r5]			@ Save machine type
+	bic	r4, r0, #CR_A			@ Clear 'A' bit
+	stmia	r6, {r0, r4}			@ Save control register values
+	b	start_kernel
+
+/*
+ * Exception handling.  Something went wrong and we can't proceed.  We
+ * ought to tell the user, but since we don't have any guarantee that
+ * we're even running on the right architecture, we do virtually nothing.
+ *
+ * If CONFIG_DEBUG_LL is set we try to print out something about the error
+ * and hope for the best (useful if bootloader fails to pass a proper
+ * machine ID for example).
+ */
+
+	.type	__error_p, %function
+__error_p:
+#ifdef CONFIG_DEBUG_LL
+	adr	r0, str_p1
+	bl	printascii
+	b	__error
+str_p1:	.asciz	"\nError: unrecognized/unsupported processor variant.\n"
+	.align
+#endif
+
+	.type	__error_a, %function
+__error_a:
+#ifdef CONFIG_DEBUG_LL
+	mov	r4, r1				@ preserve machine ID
+	adr	r0, str_a1
+	bl	printascii
+	mov	r0, r4
+	bl	printhex8
+	adr	r0, str_a2
+	bl	printascii
+	adr	r3, 3f
+	ldmia	r3, {r4, r5, r6}		@ get machine desc list
+	sub	r4, r3, r4			@ get offset between virt&phys
+	add	r5, r5, r4			@ convert virt addresses to
+	add	r6, r6, r4			@ physical address space
+1:	ldr	r0, [r5, #MACHINFO_TYPE]	@ get machine type
+	bl	printhex8
+	mov	r0, #'\t'
+	bl	printch
+	ldr     r0, [r5, #MACHINFO_NAME]	@ get machine name
+	add	r0, r0, r4
+	bl	printascii
+	mov	r0, #'\n'
+	bl	printch
+	add	r5, r5, #SIZEOF_MACHINE_DESC	@ next machine_desc
+	cmp	r5, r6
+	blo	1b
+	adr	r0, str_a3
+	bl	printascii
+	b	__error
+str_a1:	.asciz	"\nError: unrecognized/unsupported machine ID (r1 = 0x"
+str_a2:	.asciz	").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
+str_a3:	.asciz	"\nPlease check your kernel config and/or bootloader.\n"
+	.align
+#endif
+
+	.type	__error, %function
+__error:
+#ifdef CONFIG_ARCH_RPC
+/*
+ * Turn the screen red on a error - RiscPC only.
+ */
+	mov	r0, #0x02000000
+	mov	r3, #0x11
+	orr	r3, r3, r3, lsl #8
+	orr	r3, r3, r3, lsl #16
+	str	r3, [r0], #4
+	str	r3, [r0], #4
+	str	r3, [r0], #4
+	str	r3, [r0], #4
+#endif
+1:	mov	r0, r0
+	b	1b
+
+
+/*
+ * Read processor ID register (CP#15, CR0), and look up in the linker-built
+ * supported processor list.  Note that we can't use the absolute addresses
+ * for the __proc_info lists since we aren't running with the MMU on
+ * (and therefore, we are not in the correct address space).  We have to
+ * calculate the offset.
+ *
+ *	r9 = cpuid
+ * Returns:
+ *	r3, r4, r6 corrupted
+ *	r5 = proc_info pointer in physical address space
+ *	r9 = cpuid (preserved)
+ */
+	.type	__lookup_processor_type, %function
+__lookup_processor_type:
+	adr	r3, 3f
+	ldmda	r3, {r5 - r7}
+	sub	r3, r3, r7			@ get offset between virt&phys
+	add	r5, r5, r3			@ convert virt addresses to
+	add	r6, r6, r3			@ physical address space
+1:	ldmia	r5, {r3, r4}			@ value, mask
+	and	r4, r4, r9			@ mask wanted bits
+	teq	r3, r4
+	beq	2f
+	add	r5, r5, #PROC_INFO_SZ		@ sizeof(proc_info_list)
+	cmp	r5, r6
+	blo	1b
+	mov	r5, #0				@ unknown processor
+2:	mov	pc, lr
+
+/*
+ * This provides a C-API version of the above function.
+ */
+ENTRY(lookup_processor_type)
+	stmfd	sp!, {r4 - r7, r9, lr}
+	mov	r9, r0
+	bl	__lookup_processor_type
+	mov	r0, r5
+	ldmfd	sp!, {r4 - r7, r9, pc}
+
+/*
+ * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
+ * more information about the __proc_info and __arch_info structures.
+ */
+	.long	__proc_info_begin
+	.long	__proc_info_end
+3:	.long	.
+	.long	__arch_info_begin
+	.long	__arch_info_end
+
+/*
+ * Lookup machine architecture in the linker-build list of architectures.
+ * Note that we can't use the absolute addresses for the __arch_info
+ * lists since we aren't running with the MMU on (and therefore, we are
+ * not in the correct address space).  We have to calculate the offset.
+ *
+ *  r1 = machine architecture number
+ * Returns:
+ *  r3, r4, r6 corrupted
+ *  r5 = mach_info pointer in physical address space
+ */
+	.type	__lookup_machine_type, %function
+__lookup_machine_type:
+	adr	r3, 3b
+	ldmia	r3, {r4, r5, r6}
+	sub	r3, r3, r4			@ get offset between virt&phys
+	add	r5, r5, r3			@ convert virt addresses to
+	add	r6, r6, r3			@ physical address space
+1:	ldr	r3, [r5, #MACHINFO_TYPE]	@ get machine type
+	teq	r3, r1				@ matches loader number?
+	beq	2f				@ found
+	add	r5, r5, #SIZEOF_MACHINE_DESC	@ next machine_desc
+	cmp	r5, r6
+	blo	1b
+	mov	r5, #0				@ unknown machine
+2:	mov	pc, lr
+
+/*
+ * This provides a C-API version of the above function.
+ */
+ENTRY(lookup_machine_type)
+	stmfd	sp!, {r4 - r6, lr}
+	mov	r1, r0
+	bl	__lookup_machine_type
+	mov	r0, r5
+	ldmfd	sp!, {r4 - r6, pc}

arch/arm/kernel/head-nommu.S

@@ -0,0 +1,83 @@
+/*
+ *  linux/arch/arm/kernel/head-nommu.S
+ *
+ *  Copyright (C) 1994-2002 Russell King
+ *  Copyright (C) 2003-2006 Hyok S. Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Common kernel startup code (non-paged MM)
+ *    for 32-bit CPUs which has a process ID register(CP15).
+ *
+ */
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/assembler.h>
+#include <asm/mach-types.h>
+#include <asm/procinfo.h>
+#include <asm/ptrace.h>
+#include <asm/constants.h>
+#include <asm/system.h>
+
+#define PROCINFO_INITFUNC       12
+
+/*
+ * Kernel startup entry point.
+ * ---------------------------
+ *
+ * This is normally called from the decompressor code.  The requirements
+ * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0,
+ * r1 = machine nr.
+ *
+ * See linux/arch/arm/tools/mach-types for the complete list of machine
+ * numbers for r1.
+ *
+ */
+	__INIT
+	.type	stext, %function
+ENTRY(stext)
+	msr	cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC @ ensure svc mode
+						@ and irqs disabled
+	mrc	p15, 0, r9, c0, c0		@ get processor id
+	bl	__lookup_processor_type		@ r5=procinfo r9=cpuid
+	movs	r10, r5				@ invalid processor (r5=0)?
+	beq	__error_p				@ yes, error 'p'
+	bl	__lookup_machine_type		@ r5=machinfo
+	movs	r8, r5				@ invalid machine (r5=0)?
+	beq	__error_a			@ yes, error 'a'
+
+	ldr	r13, __switch_data		@ address to jump to after
+						@ the initialization is done
+	adr	lr, __after_proc_init		@ return (PIC) address
+	add	pc, r10, #PROCINFO_INITFUNC
+
+/*
+ * Set the Control Register and Read the process ID.
+ */
+	.type	__after_proc_init, %function
+__after_proc_init:
+	mrc	p15, 0, r0, c1, c0, 0		@ read control reg
+#ifdef CONFIG_ALIGNMENT_TRAP
+	orr	r0, r0, #CR_A
+#else
+	bic	r0, r0, #CR_A
+#endif
+#ifdef CONFIG_CPU_DCACHE_DISABLE
+	bic	r0, r0, #CR_C
+#endif
+#ifdef CONFIG_CPU_BPREDICT_DISABLE
+	bic	r0, r0, #CR_Z
+#endif
+#ifdef CONFIG_CPU_ICACHE_DISABLE
+	bic	r0, r0, #CR_I
+#endif
+	mcr	p15, 0, r0, c1, c0, 0		@ write control reg
+
+	mov	pc, r13				@ clear the BSS and jump
+						@ to start_kernel
+
+#include "head-common.S"

arch/arm/kernel/head.S

@@ -102,49 +102,6 @@ ENTRY(stext)
 	adr	lr, __enable_mmu		@ return (PIC) address
 	add	pc, r10, #PROCINFO_INITFUNC
 
-	.type	__switch_data, %object
-__switch_data:
-	.long	__mmap_switched
-	.long	__data_loc			@ r4
-	.long	__data_start			@ r5
-	.long	__bss_start			@ r6
-	.long	_end				@ r7
-	.long	processor_id			@ r4
-	.long	__machine_arch_type		@ r5
-	.long	cr_alignment			@ r6
-	.long	init_thread_union + THREAD_START_SP @ sp
-
-/*
- * The following fragment of code is executed with the MMU on, and uses
- * absolute addresses; this is not position independent.
- *
- *  r0  = cp#15 control register
- *  r1  = machine ID
- *  r9  = processor ID
- */
-	.type	__mmap_switched, %function
-__mmap_switched:
-	adr	r3, __switch_data + 4
-
-	ldmia	r3!, {r4, r5, r6, r7}
-	cmp	r4, r5				@ Copy data segment if needed
-1:	cmpne	r5, r6
-	ldrne	fp, [r4], #4
-	strne	fp, [r5], #4
-	bne	1b
-
-	mov	fp, #0				@ Clear BSS (and zero fp)
-1:	cmp	r6, r7
-	strcc	fp, [r6],#4
-	bcc	1b
-
-	ldmia	r3, {r4, r5, r6, sp}
-	str	r9, [r4]			@ Save processor ID
-	str	r1, [r5]			@ Save machine type
-	bic	r4, r0, #CR_A			@ Clear 'A' bit
-	stmia	r6, {r0, r4}			@ Save control register values
-	b	start_kernel
-
 #if defined(CONFIG_SMP)
 	.type   secondary_startup, #function
 ENTRY(secondary_startup)
@@ -367,166 +324,4 @@ __create_page_tables:
 	mov	pc, lr
 	.ltorg
 
-
-
-/*
- * Exception handling.  Something went wrong and we can't proceed.  We
- * ought to tell the user, but since we don't have any guarantee that
- * we're even running on the right architecture, we do virtually nothing.
- *
- * If CONFIG_DEBUG_LL is set we try to print out something about the error
- * and hope for the best (useful if bootloader fails to pass a proper
- * machine ID for example).
- */
-
-	.type	__error_p, %function
-__error_p:
-#ifdef CONFIG_DEBUG_LL
-	adr	r0, str_p1
-	bl	printascii
-	b	__error
-str_p1:	.asciz	"\nError: unrecognized/unsupported processor variant.\n"
-	.align
-#endif
-
-	.type	__error_a, %function
-__error_a:
-#ifdef CONFIG_DEBUG_LL
-	mov	r4, r1				@ preserve machine ID
-	adr	r0, str_a1
-	bl	printascii
-	mov	r0, r4
-	bl	printhex8
-	adr	r0, str_a2
-	bl	printascii
-	adr	r3, 3f
-	ldmia	r3, {r4, r5, r6}		@ get machine desc list
-	sub	r4, r3, r4			@ get offset between virt&phys
-	add	r5, r5, r4			@ convert virt addresses to
-	add	r6, r6, r4			@ physical address space
-1:	ldr	r0, [r5, #MACHINFO_TYPE]	@ get machine type
-	bl	printhex8
-	mov	r0, #'\t'
-	bl	printch
-	ldr     r0, [r5, #MACHINFO_NAME]	@ get machine name
-	add	r0, r0, r4
-	bl	printascii
-	mov	r0, #'\n'
-	bl	printch
-	add	r5, r5, #SIZEOF_MACHINE_DESC	@ next machine_desc
-	cmp	r5, r6
-	blo	1b
-	adr	r0, str_a3
-	bl	printascii
-	b	__error
-str_a1:	.asciz	"\nError: unrecognized/unsupported machine ID (r1 = 0x"
-str_a2:	.asciz	").\n\nAvailable machine support:\n\nID (hex)\tNAME\n"
-str_a3:	.asciz	"\nPlease check your kernel config and/or bootloader.\n"
-	.align
-#endif
-
-	.type	__error, %function
-__error:
-#ifdef CONFIG_ARCH_RPC
-/*
- * Turn the screen red on a error - RiscPC only.
- */
-	mov	r0, #0x02000000
-	mov	r3, #0x11
-	orr	r3, r3, r3, lsl #8
-	orr	r3, r3, r3, lsl #16
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-	str	r3, [r0], #4
-#endif
-1:	mov	r0, r0
-	b	1b
-
-
-/*
- * Read processor ID register (CP#15, CR0), and look up in the linker-built
- * supported processor list.  Note that we can't use the absolute addresses
- * for the __proc_info lists since we aren't running with the MMU on
- * (and therefore, we are not in the correct address space).  We have to
- * calculate the offset.
- *
- *	r9 = cpuid
- * Returns:
- *	r3, r4, r6 corrupted
- *	r5 = proc_info pointer in physical address space
- *	r9 = cpuid (preserved)
- */
-	.type	__lookup_processor_type, %function
-__lookup_processor_type:
-	adr	r3, 3f
-	ldmda	r3, {r5 - r7}
-	sub	r3, r3, r7			@ get offset between virt&phys
-	add	r5, r5, r3			@ convert virt addresses to
-	add	r6, r6, r3			@ physical address space
-1:	ldmia	r5, {r3, r4}			@ value, mask
-	and	r4, r4, r9			@ mask wanted bits
-	teq	r3, r4
-	beq	2f
-	add	r5, r5, #PROC_INFO_SZ		@ sizeof(proc_info_list)
-	cmp	r5, r6
-	blo	1b
-	mov	r5, #0				@ unknown processor
-2:	mov	pc, lr
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_processor_type)
-	stmfd	sp!, {r4 - r7, r9, lr}
-	mov	r9, r0
-	bl	__lookup_processor_type
-	mov	r0, r5
-	ldmfd	sp!, {r4 - r7, r9, pc}
-
-/*
- * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
- * more information about the __proc_info and __arch_info structures.
- */
-	.long	__proc_info_begin
-	.long	__proc_info_end
-3:	.long	.
-	.long	__arch_info_begin
-	.long	__arch_info_end
-
-/*
- * Lookup machine architecture in the linker-build list of architectures.
- * Note that we can't use the absolute addresses for the __arch_info
- * lists since we aren't running with the MMU on (and therefore, we are
- * not in the correct address space).  We have to calculate the offset.
- *
- *  r1 = machine architecture number
- * Returns:
- *  r3, r4, r6 corrupted
- *  r5 = mach_info pointer in physical address space
- */
-	.type	__lookup_machine_type, %function
-__lookup_machine_type:
-	adr	r3, 3b
-	ldmia	r3, {r4, r5, r6}
-	sub	r3, r3, r4			@ get offset between virt&phys
-	add	r5, r5, r3			@ convert virt addresses to
-	add	r6, r6, r3			@ physical address space
-1:	ldr	r3, [r5, #MACHINFO_TYPE]	@ get machine type
-	teq	r3, r1				@ matches loader number?
-	beq	2f				@ found
-	add	r5, r5, #SIZEOF_MACHINE_DESC	@ next machine_desc
-	cmp	r5, r6
-	blo	1b
-	mov	r5, #0				@ unknown machine
-2:	mov	pc, lr
-
-/*
- * This provides a C-API version of the above function.
- */
-ENTRY(lookup_machine_type)
-	stmfd	sp!, {r4 - r6, lr}
-	mov	r1, r0
-	bl	__lookup_machine_type
-	mov	r0, r5
-	ldmfd	sp!, {r4 - r6, pc}
+#include "head-common.S"

arch/arm/kernel/signal.h

@@ -7,6 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#define KERN_SIGRETURN_CODE	0xffff0500
+#define KERN_SIGRETURN_CODE	(CONFIG_VECTORS_BASE + 0x00000500)
 
 extern const unsigned long sigreturn_codes[7];

arch/arm/kernel/traps.c

@@ -688,6 +688,7 @@ EXPORT_SYMBOL(abort);
 
 void __init trap_init(void)
 {
+	unsigned long vectors = CONFIG_VECTORS_BASE;
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
 	extern char __kuser_helper_start[], __kuser_helper_end[];
@@ -698,9 +699,9 @@ void __init trap_init(void)
 	 * into the vector page, mapped at 0xffff0000, and ensure these
 	 * are visible to the instruction stream.
 	 */
-	memcpy((void *)0xffff0000, __vectors_start, __vectors_end - __vectors_start);
-	memcpy((void *)0xffff0200, __stubs_start, __stubs_end - __stubs_start);
-	memcpy((void *)0xffff1000 - kuser_sz, __kuser_helper_start, kuser_sz);
+	memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
+	memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start);
+	memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
 
 	/*
 	 * Copy signal return handlers into the vector page, and
@@ -709,6 +710,6 @@ void __init trap_init(void)
 	memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes,
 	       sizeof(sigreturn_codes));
 
-	flush_icache_range(0xffff0000, 0xffff0000 + PAGE_SIZE);
+	flush_icache_range(vectors, vectors + PAGE_SIZE);
 	modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
 }