Merge branch 'for-rmk' of git://github.com/at91linux/linux-2.6-at91 into devel-stable

.gitignore

@@ -57,6 +57,7 @@ modules.builtin
 include/config
 include/linux/version.h
 include/generated
+arch/*/include/generated
 
 # stgit generated dirs
 patches-*

Documentation/DocBook/Makefile

@@ -73,7 +73,7 @@ installmandocs: mandocs
 ###
 #External programs used
 KERNELDOC = $(srctree)/scripts/kernel-doc
-DOCPROC   = $(objtree)/scripts/basic/docproc
+DOCPROC   = $(objtree)/scripts/docproc
 
 XMLTOFLAGS = -m $(srctree)/Documentation/DocBook/stylesheet.xsl
 XMLTOFLAGS += --skip-validation

Documentation/filesystems/ubifs.txt

@@ -115,28 +115,8 @@ ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs
 Module Parameters for Debugging
 ===============================
 
-When UBIFS has been compiled with debugging enabled, there are 3 module
+When UBIFS has been compiled with debugging enabled, there are 2 module
 parameters that are available to control aspects of testing and debugging.
-The parameters are unsigned integers where each bit controls an option.
-The parameters are:
-
-debug_msgs	Selects which debug messages to display, as follows:
-
-		Message Type				Flag value
-
-		General messages			1
-		Journal messages			2
-		Mount messages				4
-		Commit messages				8
-		LEB search messages			16
-		Budgeting messages			32
-		Garbage collection messages		64
-		Tree Node Cache (TNC) messages		128
-		LEB properties (lprops) messages	256
-		Input/output messages			512
-		Log messages				1024
-		Scan messages				2048
-		Recovery messages			4096
 
 debug_chks	Selects extra checks that UBIFS can do while running:
 
@@ -154,11 +134,9 @@ debug_tsts	Selects a mode of testing, as follows:
 
 		Test mode				Flag value
 
-		Force in-the-gaps method		2
 		Failure mode for recovery testing	4
 
-For example, set debug_msgs to 5 to display General messages and Mount
-messages.
+For example, set debug_chks to 3 to enable general and TNC checks.
 
 
 References

Documentation/i2c/busses/i2c-i801

@@ -19,6 +19,7 @@ Supported adapters:
   * Intel 6 Series (PCH)
   * Intel Patsburg (PCH)
   * Intel DH89xxCC (PCH)
+  * Intel Panther Point (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

Documentation/i2c/writing-clients

@@ -38,7 +38,7 @@ static struct i2c_driver foo_driver = {
 		.name	= "foo",
 	},
 
-	.id_table	= foo_ids,
+	.id_table	= foo_idtable,
 	.probe		= foo_probe,
 	.remove		= foo_remove,
 	/* if device autodetection is needed: */

Documentation/input/elantech.txt

@@ -34,7 +34,8 @@ Contents
 Currently the Linux Elantech touchpad driver is aware of two different
 hardware versions unimaginatively called version 1 and version 2. Version 1
 is found in "older" laptops and uses 4 bytes per packet. Version 2 seems to
-be introduced with the EeePC and uses 6 bytes per packet.
+be introduced with the EeePC and uses 6 bytes per packet, and provides
+additional features such as position of two fingers, and width of the touch.
 
 The driver tries to support both hardware versions and should be compatible
 with the Xorg Synaptics touchpad driver and its graphical configuration
@@ -94,18 +95,44 @@ Currently the Linux Elantech touchpad driver provides two extra knobs under
    can check these bits and reject any packet that appears corrupted. Using
    this knob you can bypass that check.
 
-   It is not known yet whether hardware version 2 provides the same parity
-   bits. Hence checking is disabled by default. Currently even turning it on
-   will do nothing.
-
+   Hardware version 2 does not provide the same parity bits. Only some basic
+   data consistency checking can be done. For now checking is disabled by
+   default. Currently even turning it on will do nothing.
 
 /////////////////////////////////////////////////////////////////////////////
 
+3. Differentiating hardware versions
+   =================================
+
+To detect the hardware version, read the version number as param[0].param[1].param[2]
+
+ 4 bytes version: (after the arrow is the name given in the Dell-provided driver)
+ 02.00.22 => EF013
+ 02.06.00 => EF019
+In the wild, there appear to be more versions, such as 00.01.64, 01.00.21,
+02.00.00, 02.00.04, 02.00.06.
+
+ 6 bytes:
+ 02.00.30 => EF113
+ 02.08.00 => EF023
+ 02.08.XX => EF123
+ 02.0B.00 => EF215
+ 04.01.XX => Scroll_EF051
+ 04.02.XX => EF051
+In the wild, there appear to be more versions, such as 04.03.01, 04.04.11. There
+appears to be almost no difference, except for EF113, which does not report
+pressure/width and has different data consistency checks.
+
+Probably all the versions with param[0] <= 01 can be considered as
+4 bytes/firmware 1. The versions < 02.08.00, with the exception of 02.00.30, as
+4 bytes/firmware 2. Everything >= 02.08.00 can be considered as 6 bytes.
+
+/////////////////////////////////////////////////////////////////////////////
 
-3. Hardware version 1
+4. Hardware version 1
    ==================
 
-3.1 Registers
+4.1 Registers
     ~~~~~~~~~
 
 By echoing a hexadecimal value to a register it contents can be altered.
@@ -168,7 +195,7 @@ For example:
          smart edge activation area width?
 
 
-3.2 Native relative mode 4 byte packet format
+4.2 Native relative mode 4 byte packet format
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 byte 0:
@@ -226,9 +253,13 @@ byte 3:
                        positive = down
 
 
-3.3 Native absolute mode 4 byte packet format
+4.3 Native absolute mode 4 byte packet format
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
+EF013 and EF019 have a special behaviour (due to a bug in the firmware?), and
+when 1 finger is touching, the first 2 position reports must be discarded.
+This counting is reset whenever a different number of fingers is reported.
+
 byte 0:
    firmware version 1.x:
 
@@ -279,11 +310,11 @@ byte 3:
 /////////////////////////////////////////////////////////////////////////////
 
 
-4. Hardware version 2
+5. Hardware version 2
    ==================
 
 
-4.1 Registers
+5.1 Registers
     ~~~~~~~~~
 
 By echoing a hexadecimal value to a register it contents can be altered.
@@ -316,16 +347,41 @@ For example:
                                    0x7f = never i.e. tap again to release)
 
 
-4.2 Native absolute mode 6 byte packet format
+5.2 Native absolute mode 6 byte packet format
     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-4.2.1 One finger touch
+5.2.1 Parity checking and packet re-synchronization
+There is no parity checking, however some consistency checks can be performed.
+
+For instance for EF113:
+        SA1= packet[0];
+        A1 = packet[1];
+        B1 = packet[2];
+        SB1= packet[3];
+        C1 = packet[4];
+        D1 = packet[5];
+        if( (((SA1 & 0x3C) != 0x3C) && ((SA1 & 0xC0) != 0x80)) || // check Byte 1
+            (((SA1 & 0x0C) != 0x0C) && ((SA1 & 0xC0) == 0x80)) || // check Byte 1 (one finger pressed)
+            (((SA1 & 0xC0) != 0x80) && (( A1 & 0xF0) != 0x00)) || // check Byte 2
+            (((SB1 & 0x3E) != 0x38) && ((SA1 & 0xC0) != 0x80)) || // check Byte 4
+            (((SB1 & 0x0E) != 0x08) && ((SA1 & 0xC0) == 0x80)) || // check Byte 4 (one finger pressed)
+            (((SA1 & 0xC0) != 0x80) && (( C1 & 0xF0) != 0x00))  ) // check Byte 5
+		// error detected
+
+For all the other ones, there are just a few constant bits:
+        if( ((packet[0] & 0x0C) != 0x04) ||
+            ((packet[3] & 0x0f) != 0x02) )
+		// error detected
+
+
+In case an error is detected, all the packets are shifted by one (and packet[0] is discarded).
+
+5.2.1 One/Three finger touch
       ~~~~~~~~~~~~~~~~
 
 byte 0:
 
    bit   7   6   5   4   3   2   1   0
-        n1  n0   .   .   .   .   R   L
+	 n1  n0  w3  w2   .   .   R   L
 
          L, R = 1 when Left, Right mouse button pressed
          n1..n0 = numbers of fingers on touchpad
@@ -333,24 +389,40 @@ byte 0:
 byte 1:
 
    bit   7   6   5   4   3   2   1   0
-         .   .   .   .   .  x10 x9  x8
+	 p7  p6  p5  p4  .  x10 x9  x8
 
 byte 2:
 
    bit   7   6   5   4   3   2   1   0
-        x7  x6  x5  x4  x4  x2  x1  x0
+	 x7  x6  x5  x4  x3  x2  x1  x0
 
          x10..x0 = absolute x value (horizontal)
 
 byte 3:
 
    bit   7   6   5   4   3   2   1   0
-         .   .   .   .   .   .   .   .
+	 n4  vf  w1  w0   .   .   .  b2
+
+	 n4 = set if more than 3 fingers (only in 3 fingers mode)
+	 vf = a kind of flag ? (only on EF123, 0 when finger is over one
+	      of the buttons, 1 otherwise)
+	 w3..w0 = width of the finger touch (not EF113)
+	 b2 (on EF113 only, 0 otherwise), b2.R.L indicates one button pressed:
+		0 = none
+		1 = Left
+		2 = Right
+		3 = Middle (Left and Right)
+		4 = Forward
+		5 = Back
+		6 = Another one
+		7 = Another one
 
 byte 4:
 
    bit   7   6   5   4   3   2   1   0
-         .   .   .   .   .   .  y9  y8
+        p3  p1  p2  p0   .   .  y9  y8
+
+	 p7..p0 = pressure (not EF113)
 
 byte 5:
 
@@ -363,6 +435,11 @@ byte 5:
 4.2.2 Two finger touch
       ~~~~~~~~~~~~~~~~
 
+Note that the two pairs of coordinates are not exactly the coordinates of the
+two fingers, but only the pair of the lower-left and upper-right coordinates.
+So the actual fingers might be situated on the other diagonal of the square
+defined by these two points.
+
 byte 0:
 
    bit   7   6   5   4   3   2   1   0
@@ -376,14 +453,14 @@ byte 1:
    bit   7   6   5   4   3   2   1   0
         ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
 
-         ax8..ax0 = first finger absolute x value
+	 ax8..ax0 = lower-left finger absolute x value
 
 byte 2:
 
    bit   7   6   5   4   3   2   1   0
         ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0
 
-         ay8..ay0 = first finger absolute y value
+	 ay8..ay0 = lower-left finger absolute y value
 
 byte 3:
 
@@ -395,11 +472,11 @@ byte 4:
    bit   7   6   5   4   3   2   1   0
         bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0
 
-         bx8..bx0 = second finger absolute x value
+         bx8..bx0 = upper-right finger absolute x value
 
 byte 5:
 
    bit   7   6   5   4   3   2   1   0
         by7 by8 by5 by4 by3 by2 by1 by0
 
-         by8..by0 = second finger absolute y value
+         by8..by0 = upper-right finger absolute y value

Documentation/input/rotary-encoder.txt

@@ -9,6 +9,9 @@ peripherals with two wires. The outputs are phase-shifted by 90 degrees
 and by triggering on falling and rising edges, the turn direction can
 be determined.
 
+Some encoders have both outputs low in stable states, whereas others also have
+a stable state with both outputs high (half-period mode).
+
 The phase diagram of these two outputs look like this:
 
                   _____       _____       _____
@@ -26,6 +29,8 @@ The phase diagram of these two outputs look like this:
                 |<-------->|
 	          one step
 
+                |<-->|
+	          one step (half-period mode)
 
 For more information, please see
 	http://en.wikipedia.org/wiki/Rotary_encoder
@@ -34,6 +39,13 @@ For more information, please see
 1. Events / state machine
 -------------------------
 
+In half-period mode, state a) and c) above are used to determine the
+rotational direction based on the last stable state. Events are reported in
+states b) and d) given that the new stable state is different from the last
+(i.e. the rotation was not reversed half-way).
+
+Otherwise, the following apply:
+
 a) Rising edge on channel A, channel B in low state
 	This state is used to recognize a clockwise turn
 
@@ -96,6 +108,7 @@ static struct rotary_encoder_platform_data my_rotary_encoder_info = {
 	.gpio_b		= GPIO_ROTARY_B,
 	.inverted_a	= 0,
 	.inverted_b	= 0,
+	.half_period	= false,
 };
 
 static struct platform_device rotary_encoder_device = {

Documentation/kbuild/kbuild.txt

@@ -201,3 +201,16 @@ KBUILD_ENABLE_EXTRA_GCC_CHECKS
 --------------------------------------------------
 If enabled over the make command line with "W=1", it turns on additional
 gcc -W... options for more extensive build-time checking.
+
+KBUILD_BUILD_TIMESTAMP
+--------------------------------------------------
+Setting this to a date string overrides the timestamp used in the
+UTS_VERSION definition (uname -v in the running kernel). The value has to
+be a string that can be passed to date -d. The default value
+is the output of the date command at one point during build.
+
+KBUILD_BUILD_USER, KBUILD_BUILD_HOST
+--------------------------------------------------
+These two variables allow to override the user@host string displayed during
+boot and in /proc/version. The default value is the output of the commands
+whoami and host, respectively.

Documentation/kbuild/makefiles.txt

@@ -40,11 +40,13 @@ This document describes the Linux kernel Makefiles.
 	   --- 6.6 Commands useful for building a boot image
 	   --- 6.7 Custom kbuild commands
 	   --- 6.8 Preprocessing linker scripts
+	   --- 6.9 Generic header files
 
 	=== 7 Kbuild syntax for exported headers
 		--- 7.1 header-y
 		--- 7.2 objhdr-y
 		--- 7.3 destination-y
+		--- 7.4 generic-y
 
 	=== 8 Kbuild Variables
 	=== 9 Makefile language
@@ -499,6 +501,18 @@ more details, with real examples.
 	gcc >= 3.00. For gcc < 3.00, -malign-functions=4 is used.
 	Note: cc-option-align uses KBUILD_CFLAGS for $(CC) options
 
+    cc-disable-warning
+	cc-disable-warning checks if gcc supports a given warning and returns
+	the commandline switch to disable it. This special function is needed,
+	because gcc 4.4 and later accept any unknown -Wno-* option and only
+	warn about it if there is another warning in the source file.
+
+	Example:
+		KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
+	In the above example, -Wno-unused-but-set-variable will be added to
+	KBUILD_CFLAGS only if gcc really accepts it.
+
     cc-version
 	cc-version returns a numerical version of the $(CC) compiler version.
 	The format is <major><minor> where both are two digits. So for example
@@ -955,6 +969,11 @@ When kbuild executes, the following steps are followed (roughly):
 	used when linking modules. This is often a linker script.
 	From commandline LDFLAGS_MODULE shall be used (see kbuild.txt).
 
+    KBUILD_ARFLAGS   Options for $(AR) when creating archives
+
+	$(KBUILD_ARFLAGS) set by the top level Makefile to "D" (deterministic
+	mode) if this option is supported by $(AR).
+
 --- 6.2 Add prerequisites to archprepare:
 
 	The archprepare: rule is used to list prerequisites that need to be
@@ -1209,6 +1228,14 @@ When kbuild executes, the following steps are followed (roughly):
 	The kbuild infrastructure for *lds file are used in several
 	architecture-specific files.
 
+--- 6.9 Generic header files
+
+	The directory include/asm-generic contains the header files
+	that may be shared between individual architectures.
+	The recommended approach how to use a generic header file is
+	to list the file in the Kbuild file.
+	See "7.4 generic-y" for further info on syntax etc.
+
 === 7 Kbuild syntax for exported headers
 
 The kernel include a set of headers that is exported to userspace.
@@ -1265,6 +1292,32 @@ See subsequent chapter for the syntax of the Kbuild file.
 	In the example above all exported headers in the Kbuild file
 	will be located in the directory "include/linux" when exported.
 
+	--- 7.4 generic-y
+
+	If an architecture uses a verbatim copy of a header from
+	include/asm-generic then this is listed in the file
+	arch/$(ARCH)/include/asm/Kbuild like this:
+
+		Example:
+			#arch/x86/include/asm/Kbuild
+			generic-y += termios.h
+			generic-y += rtc.h
+
+	During the prepare phase of the build a wrapper include
+	file is generated in the directory:
+
+		arch/$(ARCH)/include/generated/asm
+
+	When a header is exported where the architecture uses
+	the generic header a similar wrapper is generated as part
+	of the set of exported headers in the directory:
+
+		usr/include/asm
+
+	The generated wrapper will in both cases look like the following:
+
+		Example: termios.h
+			#include <asm-generic/termios.h>
 
 === 8 Kbuild Variables
 

MAINTAINERS

@@ -2245,10 +2245,10 @@ F:	drivers/gpu/drm/
 F:	include/drm/
 
 INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
-M:	Chris Wilson <chris@chris-wilson.co.uk>
+M:	Keith Packard <keithp@keithp.com>
 L:	intel-gfx@lists.freedesktop.org (subscribers-only)
 L:	dri-devel@lists.freedesktop.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6.git
 S:	Supported
 F:	drivers/gpu/drm/i915
 F:	include/drm/i915*
@@ -5592,10 +5592,11 @@ M:	James Morris <jmorris@namei.org>
 M:	Eric Paris <eparis@parisplace.org>
 L:	selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:	http://selinuxproject.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+T:	git git://git.infradead.org/users/eparis/selinux.git
 S:	Supported
 F:	include/linux/selinux*
 F:	security/selinux/
+F:	scripts/selinux/
 
 APPARMOR SECURITY MODULE
 M:	John Johansen <john.johansen@canonical.com>

Makefile

@@ -103,7 +103,7 @@ ifeq ("$(origin O)", "command line")
 endif
 
 ifeq ("$(origin W)", "command line")
-  export KBUILD_ENABLE_EXTRA_GCC_CHECKS := 1
+  export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
 endif
 
 # That's our default target when none is given on the command line
@@ -349,7 +349,8 @@ CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage
 
 # Use LINUXINCLUDE when you must reference the include/ directory.
 # Needed to be compatible with the O= option
-LINUXINCLUDE    := -I$(srctree)/arch/$(hdr-arch)/include -Iinclude \
+LINUXINCLUDE    := -I$(srctree)/arch/$(hdr-arch)/include \
+                   -Iarch/$(hdr-arch)/include/generated -Iinclude \
                    $(if $(KBUILD_SRC), -I$(srctree)/include) \
                    -include include/generated/autoconf.h
 
@@ -382,6 +383,7 @@ export KBUILD_CFLAGS CFLAGS_KERNEL CFLAGS_MODULE CFLAGS_GCOV
 export KBUILD_AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
 export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
 export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
+export KBUILD_ARFLAGS
 
 # When compiling out-of-tree modules, put MODVERDIR in the module
 # tree rather than in the kernel tree. The kernel tree might
@@ -416,6 +418,12 @@ ifneq ($(KBUILD_SRC),)
 	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
 endif
 
+# Support for using generic headers in asm-generic
+PHONY += asm-generic
+asm-generic:
+	$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.asm-generic \
+	            obj=arch/$(SRCARCH)/include/generated/asm
+
 # To make sure we do not include .config for any of the *config targets
 # catch them early, and hand them over to scripts/kconfig/Makefile
 # It is allowed to specify more targets when calling make, including
@@ -559,6 +567,10 @@ ifndef CONFIG_CC_STACKPROTECTOR
 KBUILD_CFLAGS += $(call cc-option, -fno-stack-protector)
 endif
 
+# This warning generated too much noise in a regular build.
+# Use make W=1 to enable this warning (see scripts/Makefile.build)
+KBUILD_CFLAGS += $(call cc-disable-warning, unused-but-set-variable)
+
 ifdef CONFIG_FRAME_POINTER
 KBUILD_CFLAGS	+= -fno-omit-frame-pointer -fno-optimize-sibling-calls
 else
@@ -604,7 +616,7 @@ CHECKFLAGS     += $(NOSTDINC_FLAGS)
 KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 
 # disable pointer signed / unsigned warnings in gcc 4.0
-KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
+KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
 
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
@@ -612,6 +624,9 @@ KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 # conserve stack if available
 KBUILD_CFLAGS   += $(call cc-option,-fconserve-stack)
 
+# use the deterministic mode of AR if available
+KBUILD_ARFLAGS := $(call ar-option,D)
+
 # check for 'asm goto'
 ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y)
 	KBUILD_CFLAGS += -DCC_HAVE_ASM_GOTO
@@ -797,15 +812,17 @@ ifdef CONFIG_KALLSYMS
 # o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
 # o Verify that the System.map from vmlinux matches the map from
 #   .tmp_vmlinux2, just in case we did not generate kallsyms correctly.
-# o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using
+# o If 'make KALLSYMS_EXTRA_PASS=1" was used, do an extra pass using
 #   .tmp_vmlinux3 and .tmp_kallsyms3.o.  This is only meant as a
 #   temporary bypass to allow the kernel to be built while the
 #   maintainers work out what went wrong with kallsyms.
 
-ifdef CONFIG_KALLSYMS_EXTRA_PASS
-last_kallsyms := 3
-else
 last_kallsyms := 2
+
+ifdef KALLSYMS_EXTRA_PASS
+ifneq ($(KALLSYMS_EXTRA_PASS),0)
+last_kallsyms := 3
+endif
 endif
 
 kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
@@ -816,7 +833,8 @@ define verify_kallsyms
 	  $(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
 	$(Q)cmp -s System.map .tmp_System.map ||                             \
 		(echo Inconsistent kallsyms data;                            \
-		 echo Try setting CONFIG_KALLSYMS_EXTRA_PASS;                \
+		 echo This is a bug - please report about it;                \
+		 echo Try "make KALLSYMS_EXTRA_PASS=1" as a workaround;      \
 		 rm .tmp_kallsyms* ; /bin/false )
 endef
 
@@ -947,7 +965,7 @@ ifneq ($(KBUILD_SRC),)
 endif
 
 # prepare2 creates a makefile if using a separate output directory
-prepare2: prepare3 outputmakefile
+prepare2: prepare3 outputmakefile asm-generic
 
 prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \
                    include/config/auto.conf
@@ -1021,7 +1039,7 @@ hdr-inst := -rR -f $(srctree)/scripts/Makefile.headersinst obj
 hdr-dst = $(if $(KBUILD_HEADERS), dst=include/asm-$(hdr-arch), dst=include/asm)
 
 PHONY += __headers
-__headers: include/linux/version.h scripts_basic FORCE
+__headers: include/linux/version.h scripts_basic asm-generic FORCE
 	$(Q)$(MAKE) $(build)=scripts build_unifdef
 
 PHONY += headers_install_all
@@ -1136,7 +1154,8 @@ CLEAN_FILES +=	vmlinux System.map \
                 .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
 
 # Directories & files removed with 'make mrproper'
-MRPROPER_DIRS  += include/config usr/include include/generated
+MRPROPER_DIRS  += include/config usr/include include/generated          \
+                  arch/*/include/generated
 MRPROPER_FILES += .config .config.old .version .old_version             \
                   include/linux/version.h                               \
 		  Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS
@@ -1267,7 +1286,11 @@ help:
 	@echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
 	@echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
 	@echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
-	@echo  '  make W=1   [targets] Enable extra gcc checks'
+	@echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
+	@echo  '		1: warnings which may be relevant and do not occur too often'
+	@echo  '		2: warnings which occur quite often but may still be relevant'
+	@echo  '		3: more obscure warnings, can most likely be ignored'
+	@echo  '		Multiple levels can be combined with W=12 or W=123'
 	@echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
 	@echo  ''
 	@echo  'Execute "make" or "make all" to build all targets marked with [*] '
@@ -1291,6 +1314,7 @@ $(help-board-dirs): help-%:
 # Documentation targets
 # ---------------------------------------------------------------------------
 %docs: scripts_basic FORCE
+	$(Q)$(MAKE) $(build)=scripts build_docproc
 	$(Q)$(MAKE) $(build)=Documentation/DocBook $@
 
 else # KBUILD_EXTMOD
@@ -1375,7 +1399,7 @@ endif # KBUILD_EXTMOD
 clean: $(clean-dirs)
 	$(call cmd,rmdirs)
 	$(call cmd,rmfiles)
-	@find $(or $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
+	@find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
 		\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
 		-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
 		-o -name '*.symtypes' -o -name 'modules.order' \

arch/alpha/kernel/vmlinux.lds.S

@@ -39,7 +39,7 @@ SECTIONS
 	__init_begin = ALIGN(PAGE_SIZE);
 	INIT_TEXT_SECTION(PAGE_SIZE)
 	INIT_DATA_SECTION(16)
-	PERCPU(L1_CACHE_BYTES, PAGE_SIZE)
+	PERCPU_SECTION(L1_CACHE_BYTES)
 	/* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page
 	   needed for the THREAD_SIZE aligned init_task gets freed after init */
 	. = ALIGN(THREAD_SIZE);

arch/arm/Kconfig

@@ -294,6 +294,8 @@ config ARCH_AT91
 	bool "Atmel AT91"
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
+	select CLKDEV_LOOKUP
+	select ARM_PATCH_PHYS_VIRT if MMU
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.

arch/arm/configs/at572d940hfek_defconfig

@@ -1,358 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-AT572D940HF"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT572D940HF=y
-CONFIG_MACH_AT572D940HFEB=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_PKTGEN=m
-CONFIG_NET_TCPPROBE=m
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_DEBUG_DEVICES=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_SSFDC=m
-CONFIG_MTD_OOPS=m
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PLATRAM=m
-CONFIG_MTD_DATAFLASH=m
-CONFIG_MTD_M25P80=m
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTD_BLOCK2MTD=m
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_DISKONCHIP=m
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_GLUEBI=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_DS1682=m
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
-CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_PHYLIB=y
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_MDIO_BITBANG=m
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_USB_ZD1201=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_STOWAWAY=m
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_MOUSE_GPIO=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_RAW=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_N_HDLC=m
-CONFIG_SPECIALIX=m
-CONFIG_STALDRV=y
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_R3964=m
-CONFIG_RAW_DRIVER=m
-CONFIG_TCG_TPM=m
-CONFIG_TCG_NSC=m
-CONFIG_TCG_ATMEL=m
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_SPIDEV=m
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_PCM_OSS_PLUGINS is not set
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-CONFIG_USB_HID=m
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_STORAGE_KARMA=m
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_DEBUG=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_MIDI_GADGET=m
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_AT91=m
-CONFIG_MMC_SPI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_DS1305=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD_DEBUG=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_CHECK=y
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_CMODE_FAVOURLZO=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
-CONFIG_SGI_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
-CONFIG_DLM=m
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m

arch/arm/configs/at91sam9261ek_defconfig → arch/arm/configs/at91sam9261_defconfig

@@ -1,9 +1,13 @@
 CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZMA=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_NAMESPACES=y
+CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -15,18 +19,27 @@ CONFIG_ARCH_AT91SAM9261=y
 CONFIG_MACH_AT91SAM9261EK=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 # CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_VFP=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
+CONFIG_CFG80211=y
+CONFIG_LIB80211=y
+CONFIG_MAC80211=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
@@ -34,8 +47,12 @@ CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_TCLIB=y
 CONFIG_ATMEL_SSC=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
@@ -45,12 +62,27 @@ CONFIG_NET_ETHERNET=y
 CONFIG_DM9000=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+CONFIG_USB_ZD1201=m
+CONFIG_RTL8187=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_ZD1211RW=m
+CONFIG_INPUT_POLLDEV=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_HW_RANDOM=y
@@ -65,31 +97,62 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_AT73C213=y
+CONFIG_SND_USB_AUDIO=m
 # CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
 CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
+CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_UTF8=y
+CONFIG_FTRACE=y
+CONFIG_CRC_CCITT=m

arch/arm/configs/at91sam9263ek_defconfig → arch/arm/configs/at91sam9263_defconfig

@@ -1,9 +1,13 @@
 CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZMA=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_NAMESPACES=y
+CONFIG_EMBEDDED=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
@@ -13,53 +17,81 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9263=y
 CONFIG_MACH_AT91SAM9263EK=y
+CONFIG_MACH_USB_A9263=y
+CONFIG_MACH_NEOCORE926=y
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
 # CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
+CONFIG_AUTO_ZRELADDR=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
+CONFIG_NET_KEY=y
 CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
 CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_BLOCK2MTD=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
+CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
 CONFIG_MACB=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_USB_ZD1201=m
+CONFIG_INPUT_POLLDEV=m
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_HW_RANDOM=y
@@ -74,8 +106,25 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_AT91SAM9X_WATCHDOG=y
 CONFIG_FB=y
 CONFIG_FB_ATMEL=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_ATMEL_AC97C=y
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB_AUDIO=m
 CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_MON=y
@@ -83,24 +132,37 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_MMC=y
+CONFIG_SDIO_UART=m
 CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_ATMEL_PWM=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
+CONFIG_FUSE_FS=m
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
 CONFIG_CRAMFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_850=y
 CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
+CONFIG_FTRACE=y
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+CONFIG_XZ_DEC=y

arch/arm/configs/neocore926_defconfig

@@ -1,104 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9263=y
-CONFIG_MACH_NEOCORE926=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_ATMEL_PWM=y
-CONFIG_ATMEL_TCLIB=y
-CONFIG_SCSI=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MACB=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_DEVKMEM is not set
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_SERIAL_ATMEL_PDC is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_SDIO_UART=y
-CONFIG_MMC_AT91=m
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_AUTOFS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_HW is not set

arch/arm/configs/usb-a9263_defconfig

@@ -1,106 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9263=y
-CONFIG_MACH_USB_A9263=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_HW is not set

arch/arm/kernel/vmlinux.lds.S

@@ -82,7 +82,7 @@ SECTIONS
 #endif
 	}
 
-	PERCPU(32, PAGE_SIZE)
+	PERCPU_SECTION(32)
 
 #ifndef CONFIG_XIP_KERNEL
 	. = ALIGN(PAGE_SIZE);

arch/arm/mach-at91/Kconfig

@@ -3,9 +3,6 @@ if ARCH_AT91
 config HAVE_AT91_DATAFLASH_CARD
 	bool
 
-config HAVE_NAND_ATMEL_BUSWIDTH_16
-	bool
-
 config HAVE_AT91_USART3
 	bool
 
@@ -85,11 +82,6 @@ config ARCH_AT91CAP9
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
 
-config ARCH_AT572D940HF
-	bool "AT572D940HF"
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-
 config ARCH_AT91X40
 	bool "AT91x40"
 	select ARCH_USES_GETTIMEOFFSET
@@ -209,7 +201,6 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type"
 config MACH_AT91SAM9260EK
 	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
 	select HAVE_AT91_DATAFLASH_CARD
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
@@ -270,7 +261,6 @@ comment "AT91SAM9261 Board Type"
 config MACH_AT91SAM9261EK
 	bool "Atmel AT91SAM9261-EK Evaluation Kit"
 	select HAVE_AT91_DATAFLASH_CARD
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
@@ -286,7 +276,6 @@ comment "AT91SAM9G10 Board Type"
 config MACH_AT91SAM9G10EK
 	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
 	select HAVE_AT91_DATAFLASH_CARD
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
@@ -302,7 +291,6 @@ comment "AT91SAM9263 Board Type"
 config MACH_AT91SAM9263EK
 	bool "Atmel AT91SAM9263-EK Evaluation Kit"
 	select HAVE_AT91_DATAFLASH_CARD
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
@@ -343,7 +331,6 @@ comment "AT91SAM9G20 Board Type"
 config MACH_AT91SAM9G20EK
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
 	select HAVE_AT91_DATAFLASH_CARD
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
 	  that embeds only one SD/MMC slot.
@@ -351,7 +338,6 @@ config MACH_AT91SAM9G20EK
 config MACH_AT91SAM9G20EK_2MMC
 	depends on MACH_AT91SAM9G20EK
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
 	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
@@ -416,7 +402,6 @@ comment "AT91SAM9G45 Board Type"
 
 config MACH_AT91SAM9M10G45EK
 	bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
 	  "ES" at the end of the name means that this board is an
@@ -433,7 +418,6 @@ comment "AT91CAP9 Board Type"
 config MACH_AT91CAP9ADK
 	bool "Atmel AT91CAP9A-DK Evaluation Kit"
 	select HAVE_AT91_DATAFLASH_CARD
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
@@ -442,23 +426,6 @@ endif
 
 # ----------------------------------------------------------
 
-if ARCH_AT572D940HF
-
-comment "AT572D940HF Board Type"
-
-config MACH_AT572D940HFEB
-	bool "AT572D940HF-EK"
-	depends on ARCH_AT572D940HF
-	select HAVE_AT91_DATAFLASH_CARD
-	select HAVE_NAND_ATMEL_BUSWIDTH_16
-	help
-	  Select this if you are using Atmel's AT572D940HF-EK evaluation kit.
-	  <http://www.atmel.com/products/diopsis/default.asp>
-
-endif
-
-# ----------------------------------------------------------
-
 if ARCH_AT91X40
 
 comment "AT91X40 Board Type"
@@ -483,13 +450,6 @@ config MTD_AT91_DATAFLASH_CARD
 	help
 	  Enable support for the DataFlash card.
 
-config MTD_NAND_ATMEL_BUSWIDTH_16
-	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on HAVE_NAND_ATMEL_BUSWIDTH_16
-	help
-	  On AT91SAM926x boards both types of NAND flash can be present
-	  (8 and 16 bit data bus width).
-
 # ----------------------------------------------------------
 
 comment "AT91 Feature Selections"

arch/arm/mach-at91/Makefile

@@ -19,7 +19,6 @@ obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devi
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o
 obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT572D940HF)  += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
 
 # AT91RM9200 board-specific support
@@ -78,9 +77,6 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
 # AT91CAP9 board-specific support
 obj-$(CONFIG_MACH_AT91CAP9ADK)	+= board-cap9adk.o
 
-# AT572D940HF board-specific support
-obj-$(CONFIG_MACH_AT572D940HFEB) += board-at572d940hf_ek.o
-
 # AT91X40 board-specific support
 obj-$(CONFIG_MACH_AT91EB01)	+= board-eb01.o
 

arch/arm/mach-at91/at572d940hf.c

@@ -1,377 +0,0 @@
-/*
- * arch/arm/mach-at91/at572d940hf.c
- *
- * Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2008 Atmel
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/at572d940hf.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
-
-#include "generic.h"
-#include "clock.h"
-
-static struct map_desc at572d940hf_io_desc[] __initdata = {
-	{
-		.virtual	= AT91_VA_BASE_SYS,
-		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
-		.length		= SZ_16K,
-		.type		= MT_DEVICE,
-	}, {
-		.virtual	= AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE,
-		.pfn		= __phys_to_pfn(AT572D940HF_SRAM_BASE),
-		.length		= AT572D940HF_SRAM_SIZE,
-		.type		= MT_DEVICE,
-	},
-};
-
-/* --------------------------------------------------------------------
- *  Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
-	.name		= "pioA_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_PIOA,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
-	.name		= "pioB_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_PIOB,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
-	.name		= "pioC_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_PIOC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
-	.name		= "macb_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_EMAC,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
-	.name		= "usart0_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_US0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
-	.name		= "usart1_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_US1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
-	.name		= "usart2_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_US2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
-	.name		= "mci_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_MCI,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
-	.name		= "udc_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_UDP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi0_clk = {
-	.name		= "twi0_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_TWI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
-	.name		= "spi0_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_SPI0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
-	.name		= "spi1_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_SPI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
-	.name		= "ssc0_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_SSC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
-	.name		= "ssc1_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_SSC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc2_clk = {
-	.name		= "ssc2_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_SSC2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc0_clk = {
-	.name		= "tc0_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_TC0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc1_clk = {
-	.name		= "tc1_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_TC1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc2_clk = {
-	.name		= "tc2_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_TC2,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_UHP,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc3_clk = {
-	.name		= "ssc3_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_SSC3,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi1_clk = {
-	.name		= "twi1_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_TWI1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk can0_clk = {
-	.name		= "can0_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_CAN0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk can1_clk = {
-	.name		= "can1_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_CAN1,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-static struct clk mAgicV_clk = {
-	.name		= "mAgicV_clk",
-	.pmc_mask	= 1 << AT572D940HF_ID_MSIRQ0,
-	.type		= CLK_TYPE_PERIPHERAL,
-};
-
-
-static struct clk *periph_clocks[] __initdata = {
-	&pioA_clk,
-	&pioB_clk,
-	&pioC_clk,
-	&macb_clk,
-	&usart0_clk,
-	&usart1_clk,
-	&usart2_clk,
-	&mmc_clk,
-	&udc_clk,
-	&twi0_clk,
-	&spi0_clk,
-	&spi1_clk,
-	&ssc0_clk,
-	&ssc1_clk,
-	&ssc2_clk,
-	&tc0_clk,
-	&tc1_clk,
-	&tc2_clk,
-	&ohci_clk,
-	&ssc3_clk,
-	&twi1_clk,
-	&can0_clk,
-	&can1_clk,
-	&mAgicV_clk,
-	/* irq0 .. irq2 */
-};
-
-/*
- * The five programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
-	.name		= "pck0",
-	.pmc_mask	= AT91_PMC_PCK0,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 0,
-};
-static struct clk pck1 = {
-	.name		= "pck1",
-	.pmc_mask	= AT91_PMC_PCK1,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 1,
-};
-static struct clk pck2 = {
-	.name		= "pck2",
-	.pmc_mask	= AT91_PMC_PCK2,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 2,
-};
-static struct clk pck3 = {
-	.name		= "pck3",
-	.pmc_mask	= AT91_PMC_PCK3,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 3,
-};
-
-static struct clk mAgicV_mem_clk = {
-	.name		= "mAgicV_mem_clk",
-	.pmc_mask	= AT91_PMC_PCK4,
-	.type		= CLK_TYPE_PROGRAMMABLE,
-	.id		= 4,
-};
-
-/* HClocks */
-static struct clk hck0 = {
-	.name		= "hck0",
-	.pmc_mask	= AT91_PMC_HCK0,
-	.type		= CLK_TYPE_SYSTEM,
-	.id		= 0,
-};
-static struct clk hck1 = {
-	.name		= "hck1",
-	.pmc_mask	= AT91_PMC_HCK1,
-	.type		= CLK_TYPE_SYSTEM,
-	.id		= 1,
-};
-
-static void __init at572d940hf_register_clocks(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
-		clk_register(periph_clocks[i]);
-
-	clk_register(&pck0);
-	clk_register(&pck1);
-	clk_register(&pck2);
-	clk_register(&pck3);
-	clk_register(&mAgicV_mem_clk);
-
-	clk_register(&hck0);
-	clk_register(&hck1);
-}
-
-/* --------------------------------------------------------------------
- *  GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at572d940hf_gpio[] = {
-	{
-		.id		= AT572D940HF_ID_PIOA,
-		.offset		= AT91_PIOA,
-		.clock		= &pioA_clk,
-	}, {
-		.id		= AT572D940HF_ID_PIOB,
-		.offset		= AT91_PIOB,
-		.clock		= &pioB_clk,
-	}, {
-		.id		= AT572D940HF_ID_PIOC,
-		.offset		= AT91_PIOC,
-		.clock		= &pioC_clk,
-	}
-};
-
-static void at572d940hf_reset(void)
-{
-	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
-
-/* --------------------------------------------------------------------
- *  AT572D940HF processor initialization
- * -------------------------------------------------------------------- */
-
-void __init at572d940hf_initialize(unsigned long main_clock)
-{
-	/* Map peripherals */
-	iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc));
-
-	at91_arch_reset = at572d940hf_reset;
-	at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1)
-			| (1 << AT572D940HF_ID_IRQ2);
-
-	/* Init clock subsystem */
-	at91_clock_init(main_clock);
-
-	/* Register the processor-specific clocks */
-	at572d940hf_register_clocks();
-
-	/* Register GPIO subsystem */
-	at91_gpio_init(at572d940hf_gpio, 3);
-}
-
-/* --------------------------------------------------------------------
- *  Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = {
-	7,	/* Advanced Interrupt Controller */
-	7,	/* System Peripherals */
-	0,	/* Parallel IO Controller A */
-	0,	/* Parallel IO Controller B */
-	0,	/* Parallel IO Controller C */
-	3,	/* Ethernet */
-	6,	/* USART 0 */
-	6,	/* USART 1 */
-	6,	/* USART 2 */
-	0,	/* Multimedia Card Interface */
-	4,	/* USB Device Port */
-	0,	/* Two-Wire Interface 0 */
-	6,	/* Serial Peripheral Interface 0 */
-	6,	/* Serial Peripheral Interface 1 */
-	5,	/* Serial Synchronous Controller 0 */
-	5,	/* Serial Synchronous Controller 1 */
-	5,	/* Serial Synchronous Controller 2 */
-	0,	/* Timer Counter 0 */
-	0,	/* Timer Counter 1 */
-	0,	/* Timer Counter 2 */
-	3,	/* USB Host port */
-	3,	/* Serial Synchronous Controller 3 */
-	0,	/* Two-Wire Interface 1 */
-	0,	/* CAN Controller 0 */
-	0,	/* CAN Controller 1 */
-	0,	/* mAgicV HALT line */
-	0,	/* mAgicV SIRQ0 line */
-	0,	/* mAgicV exception line */
-	0,	/* mAgicV end of DMA line */
-	0,	/* Advanced Interrupt Controller */
-	0,	/* Advanced Interrupt Controller */
-	0,	/* Advanced Interrupt Controller */
-};
-
-void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
-	if (!priority)
-		priority = at572d940hf_default_irq_priority;
-
-	/* Initialize the AIC interrupt controller */
-	at91_aic_init(priority);
-
-	/* Enable GPIO interrupts */
-	at91_gpio_irq_setup();
-}
-

arch/arm/mach-at91/at572d940hf_devices.c

@@ -1,970 +0,0 @@
-/*
- * arch/arm/mach-at91/at572d940hf_devices.c
- *
- * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- * Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at572d940hf.h>
-#include <mach/at572d940hf_matrix.h>
-#include <mach/at91sam9_smc.h>
-
-#include "generic.h"
-#include "sam9_smc.h"
-
-
-/* --------------------------------------------------------------------
- *  USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_UHP_BASE,
-		.end	= AT572D940HF_UHP_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_UHP,
-		.end	= AT572D940HF_ID_UHP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_usbh_device = {
-	.name		= "at91_ohci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ohci_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &usbh_data,
-	},
-	.resource	= usbh_resources,
-	.num_resources	= ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
-	if (!data)
-		return;
-
-	usbh_data = *data;
-	platform_device_register(&at572d940hf_usbh_device);
-
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_USB_GADGET_AT91
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_UDP,
-		.end	= AT572D940HF_BASE_UDP + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_UDP,
-		.end	= AT572D940HF_ID_UDP,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_udc_device = {
-	.name		= "at91_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data		= &udc_data,
-	},
-	.resource	= udc_resources,
-	.num_resources	= ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
-	if (!data)
-		return;
-
-	if (data->vbus_pin) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-	}
-
-	/* Pullup pin is handled internally */
-
-	udc_data = *data;
-	platform_device_register(&at572d940hf_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
-
-static struct resource eth_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_EMAC,
-		.end	= AT572D940HF_BASE_EMAC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_EMAC,
-		.end	= AT572D940HF_ID_EMAC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_eth_device = {
-	.name		= "macb",
-	.id		= -1,
-	.dev		= {
-			.dma_mask		= &eth_dmamask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-			.platform_data		= &eth_data,
-	},
-	.resource	= eth_resources,
-	.num_resources	= ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct at91_eth_data *data)
-{
-	if (!data)
-		return;
-
-	if (data->phy_irq_pin) {
-		at91_set_gpio_input(data->phy_irq_pin, 0);
-		at91_set_deglitch(data->phy_irq_pin, 1);
-	}
-
-	/* Only RMII is supported */
-	data->is_rmii = 1;
-
-	/* Pins used for RMII */
-	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ETXCK_EREFCK */
-	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ERXDV */
-	at91_set_A_periph(AT91_PIN_PA18, 0);	/* ERX0 */
-	at91_set_A_periph(AT91_PIN_PA19, 0);	/* ERX1 */
-	at91_set_A_periph(AT91_PIN_PA20, 0);	/* ERXER */
-	at91_set_A_periph(AT91_PIN_PA23, 0);	/* ETXEN */
-	at91_set_A_periph(AT91_PIN_PA21, 0);	/* ETX0 */
-	at91_set_A_periph(AT91_PIN_PA22, 0);	/* ETX1 */
-	at91_set_A_periph(AT91_PIN_PA13, 0);	/* EMDIO */
-	at91_set_A_periph(AT91_PIN_PA14, 0);	/* EMDC */
-
-	eth_data = *data;
-	platform_device_register(&at572d940hf_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_MCI,
-		.end	= AT572D940HF_BASE_MCI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_MCI,
-		.end	= AT572D940HF_ID_MCI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_mmc_device = {
-	.name		= "at91_mci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc_data,
-	},
-	.resource	= mmc_resources,
-	.num_resources	= ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
-	if (!data)
-		return;
-
-	/* input/irq */
-	if (data->det_pin) {
-		at91_set_gpio_input(data->det_pin, 1);
-		at91_set_deglitch(data->det_pin, 1);
-	}
-	if (data->wp_pin)
-		at91_set_gpio_input(data->wp_pin, 1);
-	if (data->vcc_pin)
-		at91_set_gpio_output(data->vcc_pin, 0);
-
-	/* CLK */
-	at91_set_A_periph(AT91_PIN_PC22, 0);
-
-	/* CMD */
-	at91_set_A_periph(AT91_PIN_PC23, 1);
-
-	/* DAT0, maybe DAT1..DAT3 */
-	at91_set_A_periph(AT91_PIN_PC24, 1);
-	if (data->wire4) {
-		at91_set_A_periph(AT91_PIN_PC25, 1);
-		at91_set_A_periph(AT91_PIN_PC26, 1);
-		at91_set_A_periph(AT91_PIN_PC27, 1);
-	}
-
-	mmc_data = *data;
-	platform_device_register(&at572d940hf_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	{
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at572d940hf_nand_device = {
-	.name		= "atmel_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
-	unsigned long csa;
-
-	if (!data)
-		return;
-
-	csa = at91_sys_read(AT91_MATRIX_EBICSA);
-	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
-	/* enable pin */
-	if (data->enable_pin)
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (data->rdy_pin)
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (data->det_pin)
-		at91_set_gpio_input(data->det_pin, 1);
-
-	at91_set_A_periph(AT91_PIN_PB28, 0);		/* A[22] */
-	at91_set_B_periph(AT91_PIN_PA28, 0);		/* NANDOE */
-	at91_set_B_periph(AT91_PIN_PA29, 0);		/* NANDWE */
-
-	nand_data = *data;
-	platform_device_register(&at572d940hf_nand_device);
-}
-
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
-	.sda_pin		= AT91_PIN_PC7,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PC8,
-	.scl_is_open_drain	= 1,
-	.udelay			= 2,		/* ~100 kHz */
-};
-
-static struct platform_device at572d940hf_twi_device {
-	.name			= "i2c-gpio",
-	.id			= -1,
-	.dev.platform_data	= &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	at91_set_GPIO_periph(AT91_PIN_PC7, 1);		/* TWD (SDA) */
-	at91_set_multi_drive(AT91_PIN_PC7, 1);
-
-	at91_set_GPIO_periph(AT91_PIN_PA8, 1);		/* TWCK (SCL) */
-	at91_set_multi_drive(AT91_PIN_PC8, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at572d940hf_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi0_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_TWI0,
-		.end	= AT572D940HF_BASE_TWI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_TWI0,
-		.end	= AT572D940HF_ID_TWI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_twi0_device = {
-	.name		= "at91_i2c",
-	.id		= 0,
-	.resource	= twi0_resources,
-	.num_resources	= ARRAY_SIZE(twi0_resources),
-};
-
-static struct resource twi1_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_TWI1,
-		.end	= AT572D940HF_BASE_TWI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_TWI1,
-		.end	= AT572D940HF_ID_TWI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_twi1_device = {
-	.name		= "at91_i2c",
-	.id		= 1,
-	.resource	= twi1_resources,
-	.num_resources	= ARRAY_SIZE(twi1_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
-	/* pins used for TWI0 interface */
-	at91_set_A_periph(AT91_PIN_PC7, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PC7, 1);
-
-	at91_set_A_periph(AT91_PIN_PC8, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PC8, 1);
-
-	/* pins used for TWI1 interface */
-	at91_set_A_periph(AT91_PIN_PC20, 0);		/* TWD */
-	at91_set_multi_drive(AT91_PIN_PC20, 1);
-
-	at91_set_A_periph(AT91_PIN_PC21, 0);		/* TWCK */
-	at91_set_multi_drive(AT91_PIN_PC21, 1);
-
-	i2c_register_board_info(0, devices, nr_devices);
-	platform_device_register(&at572d940hf_twi0_device);
-	platform_device_register(&at572d940hf_twi1_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_SPI0,
-		.end	= AT572D940HF_BASE_SPI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_SPI0,
-		.end	= AT572D940HF_ID_SPI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_spi0_device = {
-	.name		= "atmel_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi0_resources,
-	.num_resources	= ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
-
-static struct resource spi1_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_SPI1,
-		.end	= AT572D940HF_BASE_SPI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_SPI1,
-		.end	= AT572D940HF_ID_SPI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_spi1_device = {
-	.name		= "atmel_spi",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi1_resources,
-	.num_resources	= ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-	short enable_spi0 = 0;
-	short enable_spi1 = 0;
-
-	/* Choose SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else if (devices[i].bus_num == 0)
-			cs_pin = spi0_standard_cs[devices[i].chip_select];
-		else
-			cs_pin = spi1_standard_cs[devices[i].chip_select];
-
-		if (devices[i].bus_num == 0)
-			enable_spi0 = 1;
-		else
-			enable_spi1 = 1;
-
-		/* enable chip-select pin */
-		at91_set_gpio_output(cs_pin, 1);
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-
-	/* Configure SPI bus(es) */
-	if (enable_spi0) {
-		at91_set_A_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
-		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
-		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
-
-		at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk");
-		platform_device_register(&at572d940hf_spi0_device);
-	}
-	if (enable_spi1) {
-		at91_set_A_periph(AT91_PIN_PC0, 0);	/* SPI1_MISO */
-		at91_set_A_periph(AT91_PIN_PC1, 0);	/* SPI1_MOSI */
-		at91_set_A_periph(AT91_PIN_PC2, 0);	/* SPI1_SPCK */
-
-		at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk");
-		platform_device_register(&at572d940hf_spi1_device);
-	}
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Timer/Counter blocks
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_TCB,
-		.end	= AT572D940HF_BASE_TCB + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_TC0,
-		.end	= AT572D940HF_ID_TC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= AT572D940HF_ID_TC1,
-		.end	= AT572D940HF_ID_TC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.start	= AT572D940HF_ID_TC2,
-		.end	= AT572D940HF_ID_TC2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at572d940hf_tcb_device = {
-	.name		= "atmel_tcb",
-	.id		= 0,
-	.resource	= tcb_resources,
-	.num_resources	= ARRAY_SIZE(tcb_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
-	/* this chip has a separate clock and irq for each TC channel */
-	at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk");
-	at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk");
-	at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk");
-	platform_device_register(&at572d940hf_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- *  RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
-	{
-		.start	= AT91_BASE_SYS + AT91_RTT,
-		.end	= AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at572d940hf_rtt_device = {
-	.name		= "at91_rtt",
-	.id		= 0,
-	.resource	= rtt_resources,
-	.num_resources	= ARRAY_SIZE(rtt_resources),
-};
-
-static void __init at91_add_device_rtt(void)
-{
-	platform_device_register(&at572d940hf_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- *  Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct platform_device at572d940hf_wdt_device = {
-	.name		= "at91_wdt",
-	.id		= -1,
-	.num_resources	= 0,
-};
-
-static void __init at91_add_device_watchdog(void)
-{
-	platform_device_register(&at572d940hf_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
-	[0] = {
-		.start	= AT91_VA_BASE_SYS + AT91_DBGU,
-		.end	= AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91_ID_SYS,
-		.end	= AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data dbgu_data = {
-	.use_dma_tx	= 0,
-	.use_dma_rx	= 0,		/* DBGU not capable of receive DMA */
-	.regs		= (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_dbgu_device = {
-	.name		= "atmel_usart",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &dbgu_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &dbgu_data,
-	},
-	.resource	= dbgu_resources,
-	.num_resources	= ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PC31, 1);		/* DTXD */
-	at91_set_A_periph(AT91_PIN_PC30, 0);		/* DRXD */
-}
-
-static struct resource uart0_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_US0,
-		.end	= AT572D940HF_BASE_US0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_US0,
-		.end	= AT572D940HF_ID_US0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_uart0_device = {
-	.name		= "atmel_usart",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &uart0_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart0_data,
-	},
-	.resource	= uart0_resources,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PA8, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PA7, 0);		/* RXD0 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PA10, 0);	/* RTS0 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PA9, 0);	/* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_US1,
-		.end	= AT572D940HF_BASE_US1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_US1,
-		.end	= AT572D940HF_ID_US1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_uart1_device = {
-	.name		= "atmel_usart",
-	.id		= 2,
-	.dev		= {
-				.dma_mask		= &uart1_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart1_data,
-	},
-	.resource	= uart1_resources,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PC10, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PC9 , 0);		/* RXD1 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PC12, 0);	/* RTS1 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PC11, 0);	/* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_BASE_US2,
-		.end	= AT572D940HF_BASE_US2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT572D940HF_ID_US2,
-		.end	= AT572D940HF_ID_US2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_uart2_device = {
-	.name		= "atmel_usart",
-	.id		= 3,
-	.dev		= {
-				.dma_mask		= &uart2_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart2_data,
-	},
-	.resource	= uart2_resources,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PC15, 1);		/* TXD2 */
-	at91_set_A_periph(AT91_PIN_PC14, 0);		/* RXD2 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PC17, 0);	/* RTS2 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PC16, 0);	/* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-struct platform_device *atmel_default_console_device;	/* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
-	struct platform_device *pdev;
-
-	switch (id) {
-		case 0:		/* DBGU */
-			pdev = &at572d940hf_dbgu_device;
-			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
-			break;
-		case AT572D940HF_ID_US0:
-			pdev = &at572d940hf_uart0_device;
-			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
-			break;
-		case AT572D940HF_ID_US1:
-			pdev = &at572d940hf_uart1_device;
-			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
-			break;
-		case AT572D940HF_ID_US2:
-			pdev = &at572d940hf_uart2_device;
-			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
-			break;
-		default:
-			return;
-	}
-	pdev->id = portnr;		/* update to mapped ID */
-
-	if (portnr < ATMEL_MAX_UART)
-		at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
-	if (portnr < ATMEL_MAX_UART)
-		atmel_default_console_device = at91_uarts[portnr];
-}
-
-void __init at91_add_device_serial(void)
-{
-	int i;
-
-	for (i = 0; i < ATMEL_MAX_UART; i++) {
-		if (at91_uarts[i])
-			platform_device_register(at91_uarts[i]);
-	}
-
-	if (!atmel_default_console_device)
-		printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  mAgic
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_MAGICV
-static struct resource mAgic_resources[] = {
-	{
-		.start = AT91_MAGIC_PM_BASE,
-		.end   = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = AT91_MAGIC_DM_I_BASE,
-		.end   = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = AT91_MAGIC_DM_F_BASE,
-		.end   = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = AT91_MAGIC_DM_DB_BASE,
-		.end   = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = AT91_MAGIC_REGS_BASE,
-		.end   = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = AT91_MAGIC_EXTPAGE_BASE,
-		.end   = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start  = AT572D940HF_ID_MSIRQ0,
-		.end    = AT572D940HF_ID_MSIRQ0,
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		.start  = AT572D940HF_ID_MHALT,
-		.end    = AT572D940HF_ID_MHALT,
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		.start  = AT572D940HF_ID_MEXC,
-		.end    = AT572D940HF_ID_MEXC,
-		.flags  = IORESOURCE_IRQ,
-	},
-	{
-		.start  = AT572D940HF_ID_MEDMA,
-		.end    = AT572D940HF_ID_MEDMA,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mAgic_device = {
-	.name           = "mAgic",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(mAgic_resources),
-	.resource       = mAgic_resources,
-};
-
-void __init at91_add_device_mAgic(void)
-{
-	platform_device_register(&mAgic_device);
-}
-#else
-void __init at91_add_device_mAgic(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
-	at91_add_device_rtt();
-	at91_add_device_watchdog();
-	at91_add_device_tc();
-	return 0;
-}
-
-arch_initcall(at91_add_standard_devices);

arch/arm/mach-at91/at91cap9.c

@@ -222,6 +222,25 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq1
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
 /*
  * The four programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -258,12 +277,29 @@ static void __init at91cap9_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 	clk_register(&pck2);
 	clk_register(&pck3);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91cap9_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -303,11 +339,14 @@ static void at91cap9_poweroff(void)
  *  AT91CAP9 processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91cap9_initialize(unsigned long main_clock)
+void __init at91cap9_map_io(void)
 {
 	/* Map peripherals */
 	iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc));
+}
 
+void __init at91cap9_initialize(unsigned long main_clock)
+{
 	at91_arch_reset = at91cap9_reset;
 	pm_power_off = at91cap9_poweroff;
 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);

arch/arm/mach-at91/at91cap9_devices.c

@@ -181,10 +181,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
 
 	/* Pullup pin is handled internally by USB device peripheral */
 
-	/* Clocks */
-	at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
-	at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
 	platform_device_register(&at91_usba_udc_device);
 }
 #else
@@ -355,7 +351,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 		}
 
 		mmc0_data = *data;
-		at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk");
 		platform_device_register(&at91cap9_mmc0_device);
 	} else {			/* MCI1 */
 		/* CLK */
@@ -373,7 +368,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 		}
 
 		mmc1_data = *data;
-		at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
 		platform_device_register(&at91cap9_mmc1_device);
 	}
 }
@@ -614,7 +608,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
 		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
 
-		at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
 		platform_device_register(&at91cap9_spi0_device);
 	}
 	if (enable_spi1) {
@@ -622,7 +615,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
 		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
 		platform_device_register(&at91cap9_spi1_device);
 	}
 }
@@ -659,8 +651,6 @@ static struct platform_device at91cap9_tcb_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has one clock and irq for all three TC channels */
-	at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk");
 	platform_device_register(&at91cap9_tcb_device);
 }
 #else
@@ -1001,12 +991,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91CAP9_ID_SSC0:
 		pdev = &at91cap9_ssc0_device;
 		configure_ssc0_pins(pins);
-		at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
 		break;
 	case AT91CAP9_ID_SSC1:
 		pdev = &at91cap9_ssc1_device;
 		configure_ssc1_pins(pins);
-		at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
 		break;
 	default:
 		return;
@@ -1199,32 +1187,30 @@ struct platform_device *atmel_default_console_device;	/* the serial console devi
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (id) {
 		case 0:		/* DBGU */
 			pdev = &at91cap9_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91CAP9_ID_US0:
 			pdev = &at91cap9_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91CAP9_ID_US1:
 			pdev = &at91cap9_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91CAP9_ID_US2:
 			pdev = &at91cap9_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
 	}
-	pdev->id = portnr;		/* update to mapped ID */
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;		/* update to mapped ID */
 
 	if (portnr < ATMEL_MAX_UART)
 		at91_uarts[portnr] = pdev;
@@ -1232,8 +1218,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91cap9_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)

arch/arm/mach-at91/at91rm9200.c

@@ -18,6 +18,7 @@
 #include <mach/at91rm9200.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_st.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 #include "clock.h"
@@ -191,6 +192,26 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq6
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
+};
+
 /*
  * The four programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -227,12 +248,29 @@ static void __init at91rm9200_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 	clk_register(&pck2);
 	clk_register(&pck3);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91rm9200_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -266,15 +304,25 @@ static void at91rm9200_reset(void)
 	at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
 }
 
+int rm9200_type;
+EXPORT_SYMBOL(rm9200_type);
+
+void __init at91rm9200_set_type(int type)
+{
+	rm9200_type = type;
+}
 
 /* --------------------------------------------------------------------
  *  AT91RM9200 processor initialization
  * -------------------------------------------------------------------- */
-void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks)
+void __init at91rm9200_map_io(void)
 {
 	/* Map peripherals */
 	iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
+}
 
+void __init at91rm9200_initialize(unsigned long main_clock)
+{
 	at91_arch_reset = at91rm9200_reset;
 	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
 			| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
@@ -288,7 +336,8 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks
 	at91rm9200_register_clocks();
 
 	/* Initialize GPIO subsystem */
-	at91_gpio_init(at91rm9200_gpio, banks);
+	at91_gpio_init(at91rm9200_gpio,
+		cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP);
 }
 
 

arch/arm/mach-at91/at91rm9200_devices.c

@@ -644,15 +644,7 @@ static struct platform_device at91rm9200_tcb1_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has a separate clock and irq for each TC channel */
-	at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk");
-	at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk");
-	at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk");
 	platform_device_register(&at91rm9200_tcb0_device);
-
-	at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk");
-	at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk");
-	at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk");
 	platform_device_register(&at91rm9200_tcb1_device);
 }
 #else
@@ -849,17 +841,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91RM9200_ID_SSC0:
 		pdev = &at91rm9200_ssc0_device;
 		configure_ssc0_pins(pins);
-		at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
 		break;
 	case AT91RM9200_ID_SSC1:
 		pdev = &at91rm9200_ssc1_device;
 		configure_ssc1_pins(pins);
-		at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
 		break;
 	case AT91RM9200_ID_SSC2:
 		pdev = &at91rm9200_ssc2_device;
 		configure_ssc2_pins(pins);
-		at91_clock_associate("ssc2_clk", &pdev->dev, "ssc");
 		break;
 	default:
 		return;
@@ -1109,37 +1098,34 @@ struct platform_device *atmel_default_console_device;	/* the serial console devi
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (id) {
 		case 0:		/* DBGU */
 			pdev = &at91rm9200_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91RM9200_ID_US0:
 			pdev = &at91rm9200_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91RM9200_ID_US1:
 			pdev = &at91rm9200_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91RM9200_ID_US2:
 			pdev = &at91rm9200_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		case AT91RM9200_ID_US3:
 			pdev = &at91rm9200_uart3_device;
 			configure_usart3_pins(pins);
-			at91_clock_associate("usart3_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
 	}
-	pdev->id = portnr;		/* update to mapped ID */
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;		/* update to mapped ID */
 
 	if (portnr < ATMEL_MAX_UART)
 		at91_uarts[portnr] = pdev;
@@ -1147,8 +1133,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91rm9200_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)

arch/arm/mach-at91/at91sam9260.c

@@ -231,6 +231,28 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq2
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+	CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk),
+	CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
+	CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk),
+};
+
 /*
  * The two programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -255,10 +277,27 @@ static void __init at91sam9260_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9260_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -289,7 +328,7 @@ static void at91sam9260_poweroff(void)
  *  AT91SAM9260 processor initialization
  * -------------------------------------------------------------------- */
 
-static void __init at91sam9xe_initialize(void)
+static void __init at91sam9xe_map_io(void)
 {
 	unsigned long cidr, sram_size;
 
@@ -310,18 +349,21 @@ static void __init at91sam9xe_initialize(void)
 	iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc));
 }
 
-void __init at91sam9260_initialize(unsigned long main_clock)
+void __init at91sam9260_map_io(void)
 {
 	/* Map peripherals */
 	iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
 
 	if (cpu_is_at91sam9xe())
-		at91sam9xe_initialize();
+		at91sam9xe_map_io();
 	else if (cpu_is_at91sam9g20())
 		iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc));
 	else
 		iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
+}
 
+void __init at91sam9260_initialize(unsigned long main_clock)
+{
 	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9260_poweroff;
 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)

arch/arm/mach-at91/at91sam9260_devices.c

@@ -609,7 +609,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
 		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk");
 		platform_device_register(&at91sam9260_spi0_device);
 	}
 	if (enable_spi1) {
@@ -617,7 +616,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI1_MOSI */
 		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk");
 		platform_device_register(&at91sam9260_spi1_device);
 	}
 }
@@ -694,15 +692,7 @@ static struct platform_device at91sam9260_tcb1_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has a separate clock and irq for each TC channel */
-	at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk");
-	at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk");
-	at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk");
 	platform_device_register(&at91sam9260_tcb0_device);
-
-	at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk");
-	at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk");
-	at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk");
 	platform_device_register(&at91sam9260_tcb1_device);
 }
 #else
@@ -820,7 +810,6 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91SAM9260_ID_SSC:
 		pdev = &at91sam9260_ssc_device;
 		configure_ssc_pins(pins);
-		at91_clock_associate("ssc_clk", &pdev->dev, "pclk");
 		break;
 	default:
 		return;
@@ -1139,47 +1128,42 @@ struct platform_device *atmel_default_console_device;	/* the serial console devi
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (id) {
 		case 0:		/* DBGU */
 			pdev = &at91sam9260_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US0:
 			pdev = &at91sam9260_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US1:
 			pdev = &at91sam9260_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US2:
 			pdev = &at91sam9260_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US3:
 			pdev = &at91sam9260_uart3_device;
 			configure_usart3_pins(pins);
-			at91_clock_associate("usart3_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US4:
 			pdev = &at91sam9260_uart4_device;
 			configure_usart4_pins();
-			at91_clock_associate("usart4_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9260_ID_US5:
 			pdev = &at91sam9260_uart5_device;
 			configure_usart5_pins();
-			at91_clock_associate("usart5_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
 	}
-	pdev->id = portnr;		/* update to mapped ID */
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;		/* update to mapped ID */
 
 	if (portnr < ATMEL_MAX_UART)
 		at91_uarts[portnr] = pdev;
@@ -1187,8 +1171,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91sam9260_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)

arch/arm/mach-at91/at91sam9261.c

@@ -178,6 +178,24 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq2
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
 /*
  * The four programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -228,6 +246,11 @@ static void __init at91sam9261_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 	clk_register(&pck2);
@@ -237,6 +260,18 @@ static void __init at91sam9261_register_clocks(void)
 	clk_register(&hck1);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9261_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -267,7 +302,7 @@ static void at91sam9261_poweroff(void)
  *  AT91SAM9261 processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91sam9261_initialize(unsigned long main_clock)
+void __init at91sam9261_map_io(void)
 {
 	/* Map peripherals */
 	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
@@ -276,8 +311,10 @@ void __init at91sam9261_initialize(unsigned long main_clock)
 		iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc));
 	else
 		iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
+}
 
-
+void __init at91sam9261_initialize(unsigned long main_clock)
+{
 	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9261_poweroff;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)

arch/arm/mach-at91/at91sam9261_devices.c

@@ -426,7 +426,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
 		at91_set_A_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
 
-		at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk");
 		platform_device_register(&at91sam9261_spi0_device);
 	}
 	if (enable_spi1) {
@@ -434,7 +433,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PB31, 0);	/* SPI1_MOSI */
 		at91_set_A_periph(AT91_PIN_PB29, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk");
 		platform_device_register(&at91sam9261_spi1_device);
 	}
 }
@@ -581,10 +579,6 @@ static struct platform_device at91sam9261_tcb_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has a separate clock and irq for each TC channel */
-	at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk");
-	at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk");
-	at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk");
 	platform_device_register(&at91sam9261_tcb_device);
 }
 #else
@@ -786,17 +780,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91SAM9261_ID_SSC0:
 		pdev = &at91sam9261_ssc0_device;
 		configure_ssc0_pins(pins);
-		at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
 		break;
 	case AT91SAM9261_ID_SSC1:
 		pdev = &at91sam9261_ssc1_device;
 		configure_ssc1_pins(pins);
-		at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
 		break;
 	case AT91SAM9261_ID_SSC2:
 		pdev = &at91sam9261_ssc2_device;
 		configure_ssc2_pins(pins);
-		at91_clock_associate("ssc2_clk", &pdev->dev, "pclk");
 		break;
 	default:
 		return;
@@ -989,32 +980,30 @@ struct platform_device *atmel_default_console_device;	/* the serial console devi
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (id) {
 		case 0:		/* DBGU */
 			pdev = &at91sam9261_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91SAM9261_ID_US0:
 			pdev = &at91sam9261_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9261_ID_US1:
 			pdev = &at91sam9261_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9261_ID_US2:
 			pdev = &at91sam9261_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
 	}
-	pdev->id = portnr;		/* update to mapped ID */
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;		/* update to mapped ID */
 
 	if (portnr < ATMEL_MAX_UART)
 		at91_uarts[portnr] = pdev;
@@ -1022,8 +1011,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91sam9261_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)

arch/arm/mach-at91/at91sam9263.c

@@ -199,6 +199,23 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0 .. irq1
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+};
+
 /*
  * The four programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -235,12 +252,29 @@ static void __init at91sam9263_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 	clk_register(&pck2);
 	clk_register(&pck3);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9263_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -279,11 +313,14 @@ static void at91sam9263_poweroff(void)
  *  AT91SAM9263 processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91sam9263_initialize(unsigned long main_clock)
+void __init at91sam9263_map_io(void)
 {
 	/* Map peripherals */
 	iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
+}
 
+void __init at91sam9263_initialize(unsigned long main_clock)
+{
 	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9263_poweroff;
 	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);

arch/arm/mach-at91/at91sam9263_devices.c

@@ -308,7 +308,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 		}
 
 		mmc0_data = *data;
-		at91_clock_associate("mci0_clk", &at91sam9263_mmc0_device.dev, "mci_clk");
 		platform_device_register(&at91sam9263_mmc0_device);
 	} else {			/* MCI1 */
 		/* CLK */
@@ -339,7 +338,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 		}
 
 		mmc1_data = *data;
-		at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
 		platform_device_register(&at91sam9263_mmc1_device);
 	}
 }
@@ -686,7 +684,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
 		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
 
-		at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
 		platform_device_register(&at91sam9263_spi0_device);
 	}
 	if (enable_spi1) {
@@ -694,7 +691,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PB13, 0);	/* SPI1_MOSI */
 		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
 		platform_device_register(&at91sam9263_spi1_device);
 	}
 }
@@ -941,8 +937,6 @@ static struct platform_device at91sam9263_tcb_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has one clock and irq for all three TC channels */
-	at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk");
 	platform_device_register(&at91sam9263_tcb_device);
 }
 #else
@@ -1171,12 +1165,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91SAM9263_ID_SSC0:
 		pdev = &at91sam9263_ssc0_device;
 		configure_ssc0_pins(pins);
-		at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
 		break;
 	case AT91SAM9263_ID_SSC1:
 		pdev = &at91sam9263_ssc1_device;
 		configure_ssc1_pins(pins);
-		at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
 		break;
 	default:
 		return;
@@ -1370,32 +1362,30 @@ struct platform_device *atmel_default_console_device;	/* the serial console devi
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (id) {
 		case 0:		/* DBGU */
 			pdev = &at91sam9263_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91SAM9263_ID_US0:
 			pdev = &at91sam9263_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9263_ID_US1:
 			pdev = &at91sam9263_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9263_ID_US2:
 			pdev = &at91sam9263_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
 	}
-	pdev->id = portnr;		/* update to mapped ID */
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;		/* update to mapped ID */
 
 	if (portnr < ATMEL_MAX_UART)
 		at91_uarts[portnr] = pdev;
@@ -1403,8 +1393,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91sam9263_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)

arch/arm/mach-at91/at91sam9g45.c

@@ -184,22 +184,6 @@ static struct clk vdec_clk = {
 	.type		= CLK_TYPE_PERIPHERAL,
 };
 
-/* One additional fake clock for ohci */
-static struct clk ohci_clk = {
-	.name		= "ohci_clk",
-	.pmc_mask	= 0,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.parent		= &uhphs_clk,
-};
-
-/* One additional fake clock for second TC block */
-static struct clk tcb1_clk = {
-	.name		= "tcb1_clk",
-	.pmc_mask	= 0,
-	.type		= CLK_TYPE_PERIPHERAL,
-	.parent		= &tcb0_clk,
-};
-
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
 	&pioB_clk,
@@ -228,8 +212,30 @@ static struct clk *periph_clocks[] __initdata = {
 	&udphs_clk,
 	&mmc1_clk,
 	// irq0
-	&ohci_clk,
-	&tcb1_clk,
+};
+
+static struct clk_lookup periph_clocks_lookups[] = {
+	/* One additional fake clock for ohci */
+	CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk),
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
+	CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
+	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
 };
 
 /*
@@ -256,6 +262,11 @@ static void __init at91sam9g45_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
 		clk_register(&vdec_clk);
 
@@ -263,6 +274,18 @@ static void __init at91sam9g45_register_clocks(void)
 	clk_register(&pck1);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9g45_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -306,11 +329,14 @@ static void at91sam9g45_poweroff(void)
  *  AT91SAM9G45 processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91sam9g45_initialize(unsigned long main_clock)
+void __init at91sam9g45_map_io(void)
 {
 	/* Map peripherals */
 	iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc));
+}
 
+void __init at91sam9g45_initialize(unsigned long main_clock)
+{
 	at91_arch_reset = at91sam9g45_reset;
 	pm_power_off = at91sam9g45_poweroff;
 	at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -180,7 +180,6 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
 	}
 
 	usbh_ehci_data = *data;
-	at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk");
 	platform_device_register(&at91_usbh_ehci_device);
 }
 #else
@@ -266,10 +265,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
 
 	/* Pullup pin is handled internally by USB device peripheral */
 
-	/* Clocks */
-	at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
-	at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
 	platform_device_register(&at91_usba_udc_device);
 }
 #else
@@ -478,7 +473,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 		}
 
 		mmc0_data = *data;
-		at91_clock_associate("mci0_clk", &at91sam9g45_mmc0_device.dev, "mci_clk");
 		platform_device_register(&at91sam9g45_mmc0_device);
 
 	} else {			/* MCI1 */
@@ -504,7 +498,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
 		}
 
 		mmc1_data = *data;
-		at91_clock_associate("mci1_clk", &at91sam9g45_mmc1_device.dev, "mci_clk");
 		platform_device_register(&at91sam9g45_mmc1_device);
 
 	}
@@ -801,7 +794,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI0_MOSI */
 		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI0_SPCK */
 
-		at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk");
 		platform_device_register(&at91sam9g45_spi0_device);
 	}
 	if (enable_spi1) {
@@ -809,7 +801,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 		at91_set_A_periph(AT91_PIN_PB15, 0);	/* SPI1_MOSI */
 		at91_set_A_periph(AT91_PIN_PB16, 0);	/* SPI1_SPCK */
 
-		at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk");
 		platform_device_register(&at91sam9g45_spi1_device);
 	}
 }
@@ -999,10 +990,7 @@ static struct platform_device at91sam9g45_tcb1_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has one clock and irq for all six TC channels */
-	at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
 	platform_device_register(&at91sam9g45_tcb0_device);
-	at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
 	platform_device_register(&at91sam9g45_tcb1_device);
 }
 #else
@@ -1286,12 +1274,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91SAM9G45_ID_SSC0:
 		pdev = &at91sam9g45_ssc0_device;
 		configure_ssc0_pins(pins);
-		at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
 		break;
 	case AT91SAM9G45_ID_SSC1:
 		pdev = &at91sam9g45_ssc1_device;
 		configure_ssc1_pins(pins);
-		at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
 		break;
 	default:
 		return;
@@ -1527,37 +1513,34 @@ struct platform_device *atmel_default_console_device;	/* the serial console devi
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (id) {
 		case 0:		/* DBGU */
 			pdev = &at91sam9g45_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91SAM9G45_ID_US0:
 			pdev = &at91sam9g45_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9G45_ID_US1:
 			pdev = &at91sam9g45_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9G45_ID_US2:
 			pdev = &at91sam9g45_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9G45_ID_US3:
 			pdev = &at91sam9g45_uart3_device;
 			configure_usart3_pins(pins);
-			at91_clock_associate("usart3_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
 	}
-	pdev->id = portnr;		/* update to mapped ID */
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;		/* update to mapped ID */
 
 	if (portnr < ATMEL_MAX_UART)
 		at91_uarts[portnr] = pdev;
@@ -1565,8 +1548,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91sam9g45_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)

arch/arm/mach-at91/at91sam9rl.c

@@ -190,6 +190,24 @@ static struct clk *periph_clocks[] __initdata = {
 	// irq0
 };
 
+static struct clk_lookup periph_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk),
+	CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk),
+	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
+	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
+	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
+};
+
+static struct clk_lookup usart_clocks_lookups[] = {
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
+	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
+};
+
 /*
  * The two programmable clocks.
  * You must configure pin multiplexing to bring these signals out.
@@ -214,10 +232,27 @@ static void __init at91sam9rl_register_clocks(void)
 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
 		clk_register(periph_clocks[i]);
 
+	clkdev_add_table(periph_clocks_lookups,
+			 ARRAY_SIZE(periph_clocks_lookups));
+	clkdev_add_table(usart_clocks_lookups,
+			 ARRAY_SIZE(usart_clocks_lookups));
+
 	clk_register(&pck0);
 	clk_register(&pck1);
 }
 
+static struct clk_lookup console_clock_lookup;
+
+void __init at91sam9rl_set_console_clock(int id)
+{
+	if (id >= ARRAY_SIZE(usart_clocks_lookups))
+		return;
+
+	console_clock_lookup.con_id = "usart";
+	console_clock_lookup.clk = usart_clocks_lookups[id].clk;
+	clkdev_add(&console_clock_lookup);
+}
+
 /* --------------------------------------------------------------------
  *  GPIO
  * -------------------------------------------------------------------- */
@@ -252,7 +287,7 @@ static void at91sam9rl_poweroff(void)
  *  AT91SAM9RL processor initialization
  * -------------------------------------------------------------------- */
 
-void __init at91sam9rl_initialize(unsigned long main_clock)
+void __init at91sam9rl_map_io(void)
 {
 	unsigned long cidr, sram_size;
 
@@ -275,7 +310,10 @@ void __init at91sam9rl_initialize(unsigned long main_clock)
 
 	/* Map SRAM */
 	iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
+}
 
+void __init at91sam9rl_initialize(unsigned long main_clock)
+{
 	at91_arch_reset = at91sam9_alt_reset;
 	pm_power_off = at91sam9rl_poweroff;
 	at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);

arch/arm/mach-at91/at91sam9rl_devices.c

@@ -155,10 +155,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data)
 
 	/* Pullup pin is handled internally by USB device peripheral */
 
-	/* Clocks */
-	at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
-	at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
-
 	platform_device_register(&at91_usba_udc_device);
 }
 #else
@@ -605,10 +601,6 @@ static struct platform_device at91sam9rl_tcb_device = {
 
 static void __init at91_add_device_tc(void)
 {
-	/* this chip has a separate clock and irq for each TC channel */
-	at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk");
-	at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk");
-	at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk");
 	platform_device_register(&at91sam9rl_tcb_device);
 }
 #else
@@ -892,12 +884,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins)
 	case AT91SAM9RL_ID_SSC0:
 		pdev = &at91sam9rl_ssc0_device;
 		configure_ssc0_pins(pins);
-		at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
 		break;
 	case AT91SAM9RL_ID_SSC1:
 		pdev = &at91sam9rl_ssc1_device;
 		configure_ssc1_pins(pins);
-		at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
 		break;
 	default:
 		return;
@@ -1141,37 +1131,34 @@ struct platform_device *atmel_default_console_device;	/* the serial console devi
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (id) {
 		case 0:		/* DBGU */
 			pdev = &at91sam9rl_dbgu_device;
 			configure_dbgu_pins();
-			at91_clock_associate("mck", &pdev->dev, "usart");
 			break;
 		case AT91SAM9RL_ID_US0:
 			pdev = &at91sam9rl_uart0_device;
 			configure_usart0_pins(pins);
-			at91_clock_associate("usart0_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9RL_ID_US1:
 			pdev = &at91sam9rl_uart1_device;
 			configure_usart1_pins(pins);
-			at91_clock_associate("usart1_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9RL_ID_US2:
 			pdev = &at91sam9rl_uart2_device;
 			configure_usart2_pins(pins);
-			at91_clock_associate("usart2_clk", &pdev->dev, "usart");
 			break;
 		case AT91SAM9RL_ID_US3:
 			pdev = &at91sam9rl_uart3_device;
 			configure_usart3_pins(pins);
-			at91_clock_associate("usart3_clk", &pdev->dev, "usart");
 			break;
 		default:
 			return;
 	}
-	pdev->id = portnr;		/* update to mapped ID */
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;		/* update to mapped ID */
 
 	if (portnr < ATMEL_MAX_UART)
 		at91_uarts[portnr] = pdev;
@@ -1179,8 +1166,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
 
 void __init at91_set_serial_console(unsigned portnr)
 {
-	if (portnr < ATMEL_MAX_UART)
+	if (portnr < ATMEL_MAX_UART) {
 		atmel_default_console_device = at91_uarts[portnr];
+		at91sam9rl_set_console_clock(portnr);
+	}
 }
 
 void __init at91_add_device_serial(void)

arch/arm/mach-at91/at91x40.c

@@ -37,11 +37,6 @@ unsigned long clk_get_rate(struct clk *clk)
 	return AT91X40_MASTER_CLOCK;
 }
 
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	return NULL;
-}
-
 void __init at91x40_initialize(unsigned long main_clock)
 {
 	at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)

arch/arm/mach-at91/board-1arm.c

@@ -35,14 +35,18 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 
-static void __init onearm_map_io(void)
+static void __init onearm_init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	at91rm9200_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -92,9 +96,9 @@ static void __init onearm_board_init(void)
 
 MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
 	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= onearm_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= onearm_init_early,
 	.init_irq	= onearm_init_irq,
 	.init_machine	= onearm_board_init,
 MACHINE_END

arch/arm/mach-at91/board-afeb-9260v1.c

@@ -48,7 +48,7 @@
 #include "generic.h"
 
 
-static void __init afeb9260_map_io(void)
+static void __init afeb9260_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -218,9 +218,9 @@ static void __init afeb9260_board_init(void)
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
 	/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= afeb9260_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= afeb9260_init_early,
 	.init_irq	= afeb9260_init_irq,
 	.init_machine	= afeb9260_board_init,
 MACHINE_END

arch/arm/mach-at91/board-at572d940hf_ek.c

@@ -1,326 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-at572d940hf_ek.c
- *
- * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ds1305.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init eb_map_io(void)
-{
-	/* Initialize processor: 12.500 MHz crystal */
-	at572d940hf_initialize(12000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* USART0 on ttyS1. (Rx & Tx only) */
-	at91_register_uart(AT572D940HF_ID_US0, 1, 0);
-
-	/* USART1 on ttyS2. (Rx & Tx only) */
-	at91_register_uart(AT572D940HF_ID_US1, 2, 0);
-
-	/* USART2 on ttyS3. (Tx & Rx only */
-	at91_register_uart(AT572D940HF_ID_US2, 3, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-static void __init eb_init_irq(void)
-{
-	at572d940hf_init_interrupts(NULL);
-}
-
-
-/*
- * USB Host Port
- */
-static struct at91_usbh_data __initdata eb_usbh_data = {
-	.ports		= 2,
-};
-
-
-/*
- * USB Device Port
- */
-static struct at91_udc_data __initdata eb_udc_data = {
-	.vbus_pin	= 0,		/* no VBUS detection,UDC always on */
-	.pullup_pin	= 0,		/* pull-up driven by UDC */
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata eb_mmc_data = {
-	.wire4		= 1,
-/*	.det_pin	= ... not connected */
-/*	.wp_pin		= ... not connected */
-/*	.vcc_pin	= ... not connected */
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata eb_eth_data = {
-	.phy_irq_pin	= AT91_PIN_PB25,
-	.is_rmii	= 1,
-};
-
-/*
- * NOR flash
- */
-
-static struct mtd_partition eb_nor_partitions[] = {
-	{
-		.name		= "Raw Environment",
-		.offset		= 0,
-		.size		= SZ_4M,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "OS FS",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 3 * SZ_1M,
-		.mask_flags	= 0,
-	},
-	{
-		.name		= "APP FS",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0,
-	},
-};
-
-static void nor_flash_set_vpp(struct map_info* mi, int i) {
-};
-
-static struct physmap_flash_data nor_flash_data = {
-	.width		= 4,
-	.parts		= eb_nor_partitions,
-	.nr_parts	= ARRAY_SIZE(eb_nor_partitions),
-	.set_vpp	= nor_flash_set_vpp,
-};
-
-static struct resource nor_flash_resources[] = {
-	{
-		.start	= AT91_CHIPSELECT_0,
-		.end	= AT91_CHIPSELECT_0 + SZ_16M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data = &nor_flash_data,
-			},
-	.resource	= nor_flash_resources,
-	.num_resources	= ARRAY_SIZE(nor_flash_resources),
-};
-
-static struct sam9_smc_config __initdata eb_nor_smc_config = {
-	.ncs_read_setup		= 1,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 1,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 7,
-	.nrd_pulse		= 7,
-	.ncs_write_pulse	= 7,
-	.nwe_pulse		= 7,
-
-	.read_cycle		= 9,
-	.write_cycle		= 9,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32,
-	.tdf_cycles		= 1,
-};
-
-static void __init eb_add_device_nor(void)
-{
-	/* configure chip-select 0 (NOR) */
-	sam9_smc_configure(0, &eb_nor_smc_config);
-	platform_device_register(&nor_flash);
-}
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata eb_nand_partition[] = {
-	{
-		.name	= "Partition 1",
-		.offset	= 0,
-		.size	= SZ_16M,
-	},
-	{
-		.name	= "Partition 2",
-		.offset = MTDPART_OFS_NXTBLK,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(eb_nand_partition);
-	return eb_nand_partition;
-}
-
-static struct atmel_nand_data __initdata eb_nand_data = {
-	.ale		= 22,
-	.cle		= 21,
-/*	.det_pin	= ... not connected */
-/*	.rdy_pin	= AT91_PIN_PC16, */
-	.enable_pin	= AT91_PIN_PA15,
-	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
-};
-
-static struct sam9_smc_config __initdata eb_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 0,
-	.ncs_write_setup	= 1,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
-	.tdf_cycles		= 12,
-};
-
-static void __init eb_add_device_nand(void)
-{
-	/* setup bus-width (8 or 16) */
-	if (eb_nand_data.bus_width_16)
-		eb_nand_smc_config.mode |= AT91_SMC_DBW_16;
-	else
-		eb_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(3, &eb_nand_smc_config);
-
-	at91_add_device_nand(&eb_nand_data);
-}
-
-
-/*
- * SPI devices
- */
-static struct resource rtc_resources[] = {
-	[0] = {
-		.start	= AT572D940HF_ID_IRQ1,
-		.end	= AT572D940HF_ID_IRQ1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct ds1305_platform_data ds1306_data = {
-	.is_ds1306	= true,
-	.en_1hz		= false,
-};
-
-static struct spi_board_info eb_spi_devices[] = {
-	{	/* RTC Dallas DS1306 */
-		.modalias	= "rtc-ds1305",
-		.chip_select	= 3,
-		.mode		= SPI_CS_HIGH | SPI_CPOL | SPI_CPHA,
-		.max_speed_hz	= 500000,
-		.bus_num	= 0,
-		.irq		= AT572D940HF_ID_IRQ1,
-		.platform_data	= (void *) &ds1306_data,
-	},
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-	{	/* Dataflash card */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	},
-#endif
-};
-
-static void __init eb_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&eb_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&eb_udc_data);
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* NOR */
-	eb_add_device_nor();
-	/* NAND */
-	eb_add_device_nand();
-	/* SPI */
-	at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices));
-	/* MMC */
-	at91_add_device_mmc(0, &eb_mmc_data);
-	/* Ethernet */
-	at91_add_device_eth(&eb_eth_data);
-	/* mAgic */
-	at91_add_device_mAgic();
-}
-
-MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
-	/* Maintainer: Atmel <costa.antonior@gmail.com> */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
-	.timer		= &at91sam926x_timer,
-	.map_io		= eb_map_io,
-	.init_irq	= eb_init_irq,
-	.init_machine	= eb_board_init,
-MACHINE_END

arch/arm/mach-at91/board-cam60.c

@@ -45,7 +45,7 @@
 #include "generic.h"
 
 
-static void __init cam60_map_io(void)
+static void __init cam60_init_early(void)
 {
 	/* Initialize processor: 10 MHz crystal */
 	at91sam9260_initialize(10000000);
@@ -198,9 +198,9 @@ static void __init cam60_board_init(void)
 
 MACHINE_START(CAM60, "KwikByte CAM60")
 	/* Maintainer: KwikByte */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= cam60_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= cam60_init_early,
 	.init_irq	= cam60_init_irq,
 	.init_machine	= cam60_board_init,
 MACHINE_END

arch/arm/mach-at91/board-cap9adk.c

@@ -44,12 +44,13 @@
 #include <mach/gpio.h>
 #include <mach/at91cap9_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/system_rev.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
 
 
-static void __init cap9adk_map_io(void)
+static void __init cap9adk_init_early(void)
 {
 	/* Initialize processor: 12 MHz crystal */
 	at91cap9_initialize(12000000);
@@ -187,11 +188,6 @@ static struct atmel_nand_data __initdata cap9adk_nand_data = {
 //	.rdy_pin	= ... not connected
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
 static struct sam9_smc_config __initdata cap9adk_nand_smc_config = {
@@ -219,6 +215,7 @@ static void __init cap9adk_add_device_nand(void)
 	csa = at91_sys_read(AT91_MATRIX_EBICSA);
 	at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
 
+	cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (cap9adk_nand_data.bus_width_16)
 		cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16;
@@ -399,9 +396,9 @@ static void __init cap9adk_board_init(void)
 
 MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
 	/* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= cap9adk_map_io,
+	.map_io		= at91cap9_map_io,
+	.init_early	= cap9adk_init_early,
 	.init_irq	= cap9adk_init_irq,
 	.init_machine	= cap9adk_board_init,
 MACHINE_END

arch/arm/mach-at91/board-carmeva.c

@@ -40,10 +40,10 @@
 #include "generic.h"
 
 
-static void __init carmeva_map_io(void)
+static void __init carmeva_init_early(void)
 {
 	/* Initialize processor: 20.000 MHz crystal */
-	at91rm9200_initialize(20000000, AT91RM9200_BGA);
+	at91rm9200_initialize(20000000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -162,9 +162,9 @@ static void __init carmeva_board_init(void)
 
 MACHINE_START(CARMEVA, "Carmeva")
 	/* Maintainer: Conitec Datasystems */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= carmeva_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= carmeva_init_early,
 	.init_irq	= carmeva_init_irq,
 	.init_machine	= carmeva_board_init,
 MACHINE_END

arch/arm/mach-at91/board-cpu9krea.c

@@ -47,7 +47,7 @@
 #include "sam9_smc.h"
 #include "generic.h"
 
-static void __init cpu9krea_map_io(void)
+static void __init cpu9krea_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -375,9 +375,9 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260")
 MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
 #endif
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= cpu9krea_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= cpu9krea_init_early,
 	.init_irq	= cpu9krea_init_irq,
 	.init_machine	= cpu9krea_board_init,
 MACHINE_END

arch/arm/mach-at91/board-cpuat91.c

@@ -38,6 +38,7 @@
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
@@ -50,10 +51,13 @@ static struct gpio_led cpuat91_leds[] = {
 	},
 };
 
-static void __init cpuat91_map_io(void)
+static void __init cpuat91_init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	at91rm9200_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -175,9 +179,9 @@ static void __init cpuat91_board_init(void)
 
 MACHINE_START(CPUAT91, "Eukrea")
 	/* Maintainer: Eric Benard - EUKREA Electromatique */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= cpuat91_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= cpuat91_init_early,
 	.init_irq	= cpuat91_init_irq,
 	.init_machine	= cpuat91_board_init,
 MACHINE_END

arch/arm/mach-at91/board-csb337.c

@@ -43,10 +43,10 @@
 #include "generic.h"
 
 
-static void __init csb337_map_io(void)
+static void __init csb337_init_early(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
-	at91rm9200_initialize(3686400, AT91RM9200_BGA);
+	at91rm9200_initialize(3686400);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
@@ -257,9 +257,9 @@ static void __init csb337_board_init(void)
 
 MACHINE_START(CSB337, "Cogent CSB337")
 	/* Maintainer: Bill Gatliff */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= csb337_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= csb337_init_early,
 	.init_irq	= csb337_init_irq,
 	.init_machine	= csb337_board_init,
 MACHINE_END

arch/arm/mach-at91/board-csb637.c

@@ -40,10 +40,10 @@
 #include "generic.h"
 
 
-static void __init csb637_map_io(void)
+static void __init csb637_init_early(void)
 {
 	/* Initialize processor: 3.6864 MHz crystal */
-	at91rm9200_initialize(3686400, AT91RM9200_BGA);
+	at91rm9200_initialize(3686400);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -138,9 +138,9 @@ static void __init csb637_board_init(void)
 
 MACHINE_START(CSB637, "Cogent CSB637")
 	/* Maintainer: Bill Gatliff */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= csb637_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= csb637_init_early,
 	.init_irq	= csb637_init_irq,
 	.init_machine	= csb637_board_init,
 MACHINE_END

arch/arm/mach-at91/board-eb01.c

@@ -35,7 +35,7 @@ static void __init at91eb01_init_irq(void)
 	at91x40_init_interrupts(NULL);
 }
 
-static void __init at91eb01_map_io(void)
+static void __init at91eb01_init_early(void)
 {
 	at91x40_initialize(40000000);
 }
@@ -43,7 +43,7 @@ static void __init at91eb01_map_io(void)
 MACHINE_START(AT91EB01, "Atmel AT91 EB01")
 	/* Maintainer: Greg Ungerer <gerg@snapgear.com> */
 	.timer		= &at91x40_timer,
+	.init_early	= at91eb01_init_early,
 	.init_irq	= at91eb01_init_irq,
-	.map_io		= at91eb01_map_io,
 MACHINE_END
 

arch/arm/mach-at91/board-eb9200.c

@@ -40,10 +40,10 @@
 #include "generic.h"
 
 
-static void __init eb9200_map_io(void)
+static void __init eb9200_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+	at91rm9200_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -120,9 +120,9 @@ static void __init eb9200_board_init(void)
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= eb9200_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= eb9200_init_early,
 	.init_irq	= eb9200_init_irq,
 	.init_machine	= eb9200_board_init,
 MACHINE_END

arch/arm/mach-at91/board-ecbat91.c

@@ -38,14 +38,18 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 
-static void __init ecb_at91map_io(void)
+static void __init ecb_at91init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7);
@@ -168,9 +172,9 @@ static void __init ecb_at91board_init(void)
 
 MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
 	/* Maintainer: emQbit.com */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= ecb_at91map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= ecb_at91init_early,
 	.init_irq	= ecb_at91init_irq,
 	.init_machine	= ecb_at91board_init,
 MACHINE_END

arch/arm/mach-at91/board-eco920.c

@@ -26,11 +26,16 @@
 
 #include <mach/board.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/cpu.h>
+
 #include "generic.h"
 
-static void __init eco920_map_io(void)
+static void __init eco920_init_early(void)
 {
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
@@ -86,21 +91,6 @@ static struct platform_device eco920_flash = {
 	.num_resources  = 1,
 };
 
-static struct resource at91_beeper_resources[] = {
-	[0] = {
-		.start          = AT91RM9200_BASE_TC3,
-		.end            = AT91RM9200_BASE_TC3 + 0x39,
-		.flags          = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device at91_beeper = {
-	.name           = "at91_beeper",
-	.id             = 0,
-	.resource       = at91_beeper_resources,
-	.num_resources  = ARRAY_SIZE(at91_beeper_resources),
-};
-
 static struct spi_board_info eco920_spi_devices[] = {
 	{	/* CAN controller */
 		.modalias	= "tlv5638",
@@ -139,18 +129,14 @@ static void __init eco920_board_init(void)
 		AT91_SMC_TDF_(1)	/* float time */
 	);
 
-	at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper");
-	at91_set_B_periph(AT91_PIN_PB6, 0);
-	platform_device_register(&at91_beeper);
-
 	at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
 }
 
 MACHINE_START(ECO920, "eco920")
 	/* Maintainer: Sascha Hauer */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= eco920_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= eco920_init_early,
 	.init_irq	= eco920_init_irq,
 	.init_machine	= eco920_board_init,
 MACHINE_END

arch/arm/mach-at91/board-flexibity.c

@@ -37,7 +37,7 @@
 
 #include "generic.h"
 
-static void __init flexibity_map_io(void)
+static void __init flexibity_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -154,9 +154,9 @@ static void __init flexibity_board_init(void)
 
 MACHINE_START(FLEXIBITY, "Flexibity Connect")
 	/* Maintainer: Maxim Osipov */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= flexibity_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= flexibity_init_early,
 	.init_irq	= flexibity_init_irq,
 	.init_machine	= flexibity_board_init,
 MACHINE_END

arch/arm/mach-at91/board-foxg20.c

@@ -57,7 +57,7 @@
  */
 
 
-static void __init foxg20_map_io(void)
+static void __init foxg20_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -266,9 +266,9 @@ static void __init foxg20_board_init(void)
 
 MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
 	/* Maintainer: Sergio Tanzilli */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= foxg20_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= foxg20_init_early,
 	.init_irq	= foxg20_init_irq,
 	.init_machine	= foxg20_board_init,
 MACHINE_END

arch/arm/mach-at91/board-gsia18s.c

@@ -38,9 +38,9 @@
 #include "sam9_smc.h"
 #include "generic.h"
 
-static void __init gsia18s_map_io(void)
+static void __init gsia18s_init_early(void)
 {
-	stamp9g20_map_io();
+	stamp9g20_init_early();
 
 	/*
 	 * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
@@ -576,9 +576,9 @@ static void __init gsia18s_board_init(void)
 }
 
 MACHINE_START(GSIA18S, "GS_IA18_S")
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= gsia18s_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= gsia18s_init_early,
 	.init_irq	= init_irq,
 	.init_machine	= gsia18s_board_init,
 MACHINE_END

arch/arm/mach-at91/board-kafa.c

@@ -35,14 +35,18 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 
-static void __init kafa_map_io(void)
+static void __init kafa_init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	at91rm9200_initialize(18432000);
 
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
@@ -94,9 +98,9 @@ static void __init kafa_board_init(void)
 
 MACHINE_START(KAFA, "Sperry-Sun KAFA")
 	/* Maintainer: Sergei Sharonov */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= kafa_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= kafa_init_early,
 	.init_irq	= kafa_init_irq,
 	.init_machine	= kafa_board_init,
 MACHINE_END

arch/arm/mach-at91/board-kb9202.c

@@ -36,16 +36,19 @@
 
 #include <mach/board.h>
 #include <mach/gpio.h>
-
+#include <mach/cpu.h>
 #include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
 
-static void __init kb9202_map_io(void)
+static void __init kb9202_init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 10 MHz crystal */
-	at91rm9200_initialize(10000000, AT91RM9200_PQFP);
+	at91rm9200_initialize(10000000);
 
 	/* Set up the LEDs */
 	at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18);
@@ -136,9 +139,9 @@ static void __init kb9202_board_init(void)
 
 MACHINE_START(KB9200, "KB920x")
 	/* Maintainer: KwikByte, Inc. */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= kb9202_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= kb9202_init_early,
 	.init_irq	= kb9202_init_irq,
 	.init_machine	= kb9202_board_init,
 MACHINE_END

arch/arm/mach-at91/board-neocore926.c

@@ -51,7 +51,7 @@
 #include "generic.h"
 
 
-static void __init neocore926_map_io(void)
+static void __init neocore926_init_early(void)
 {
 	/* Initialize processor: 20 MHz crystal */
 	at91sam9263_initialize(20000000);
@@ -387,9 +387,9 @@ static void __init neocore926_board_init(void)
 
 MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
 	/* Maintainer: ADENEO */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= neocore926_map_io,
+	.map_io		= at91sam9263_map_io,
+	.init_early	= neocore926_init_early,
 	.init_irq	= neocore926_init_irq,
 	.init_machine	= neocore926_board_init,
 MACHINE_END

arch/arm/mach-at91/board-pcontrol-g20.c

@@ -37,9 +37,9 @@
 #include "generic.h"
 
 
-static void __init pcontrol_g20_map_io(void)
+static void __init pcontrol_g20_init_early(void)
 {
-	stamp9g20_map_io();
+	stamp9g20_init_early();
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback  A2 */
 	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
@@ -222,9 +222,9 @@ static void __init pcontrol_g20_board_init(void)
 
 MACHINE_START(PCONTROL_G20, "PControl G20")
 	/* Maintainer: pgsellmann@portner-elektronik.at */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= pcontrol_g20_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= pcontrol_g20_init_early,
 	.init_irq	= init_irq,
 	.init_machine	= pcontrol_g20_board_init,
 MACHINE_END

arch/arm/mach-at91/board-picotux200.c

@@ -43,10 +43,10 @@
 #include "generic.h"
 
 
-static void __init picotux200_map_io(void)
+static void __init picotux200_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+	at91rm9200_initialize(18432000);
 
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
@@ -123,9 +123,9 @@ static void __init picotux200_board_init(void)
 
 MACHINE_START(PICOTUX2XX, "picotux 200")
 	/* Maintainer: Kleinhenz Elektronik GmbH */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= picotux200_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= picotux200_init_early,
 	.init_irq	= picotux200_init_irq,
 	.init_machine	= picotux200_board_init,
 MACHINE_END

arch/arm/mach-at91/board-qil-a9260.c

@@ -48,7 +48,7 @@
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9260_initialize(12000000);
@@ -268,9 +268,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
 	/* Maintainer: calao-systems */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END

arch/arm/mach-at91/board-rm9200dk.c

@@ -45,10 +45,10 @@
 #include "generic.h"
 
 
-static void __init dk_map_io(void)
+static void __init dk_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
@@ -227,9 +227,9 @@ static void __init dk_board_init(void)
 
 MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
 	/* Maintainer: SAN People/Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= dk_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= dk_init_early,
 	.init_irq	= dk_init_irq,
 	.init_machine	= dk_board_init,
 MACHINE_END

arch/arm/mach-at91/board-rm9200ek.c

@@ -45,10 +45,10 @@
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_BGA);
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
@@ -193,9 +193,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
 	/* Maintainer: SAN People/Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END

arch/arm/mach-at91/board-sam9-l9260.c

@@ -44,7 +44,7 @@
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -212,9 +212,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
 	/* Maintainer: Olimex */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END

arch/arm/mach-at91/board-sam9260ek.c

@@ -44,12 +44,13 @@
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
+#include <mach/system_rev.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -191,11 +192,6 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
@@ -218,6 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
+	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
@@ -356,9 +353,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
 	/* Maintainer: Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END

arch/arm/mach-at91/board-sam9261ek.c

@@ -48,12 +48,13 @@
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
+#include <mach/system_rev.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9261_initialize(18432000);
@@ -197,11 +198,6 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC15,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
@@ -224,6 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
+	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
@@ -623,9 +620,9 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
 MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
 #endif
 	/* Maintainer: Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9261_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END

arch/arm/mach-at91/board-sam9263ek.c

@@ -47,12 +47,13 @@
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
+#include <mach/system_rev.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 16.367 MHz crystal */
 	at91sam9263_initialize(16367660);
@@ -198,11 +199,6 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
@@ -225,6 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
+	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
@@ -454,9 +451,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
 	/* Maintainer: Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9263_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END

arch/arm/mach-at91/board-sam9g20ek.c

@@ -43,6 +43,7 @@
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/system_rev.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
@@ -60,7 +61,7 @@ static int inline ek_have_2mmc(void)
 }
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -175,11 +176,6 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
@@ -202,6 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
+	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
@@ -406,18 +403,18 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
 	/* Maintainer: Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END
 
 MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
 	/* Maintainer: Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END

arch/arm/mach-at91/board-sam9m10g45ek.c

@@ -41,12 +41,13 @@
 #include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
+#include <mach/system_rev.h>
 
 #include "sam9_smc.h"
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9g45_initialize(12000000);
@@ -155,11 +156,6 @@ static struct atmel_nand_data __initdata ek_nand_data = {
 	.rdy_pin	= AT91_PIN_PC8,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
-	.bus_width_16	= 1,
-#else
-	.bus_width_16	= 0,
-#endif
 };
 
 static struct sam9_smc_config __initdata ek_nand_smc_config = {
@@ -182,6 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = {
 
 static void __init ek_add_device_nand(void)
 {
+	ek_nand_data.bus_width_16 = !board_have_nand_8bit();
 	/* setup bus-width (8 or 16) */
 	if (ek_nand_data.bus_width_16)
 		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
@@ -424,9 +421,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
 	/* Maintainer: Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9g45_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END

arch/arm/mach-at91/board-sam9rlek.c

@@ -38,7 +38,7 @@
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9rl_initialize(12000000);
@@ -329,9 +329,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
 	/* Maintainer: Atmel */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9rl_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END

arch/arm/mach-at91/board-snapper9260.c

@@ -40,7 +40,7 @@
 
 #define SNAPPER9260_IO_EXP_GPIO(x)	(NR_BUILTIN_GPIO + (x))
 
-static void __init snapper9260_map_io(void)
+static void __init snapper9260_init_early(void)
 {
 	at91sam9260_initialize(18432000);
 
@@ -178,9 +178,9 @@ static void __init snapper9260_board_init(void)
 }
 
 MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= snapper9260_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= snapper9260_init_early,
 	.init_irq	= snapper9260_init_irq,
 	.init_machine	= snapper9260_board_init,
 MACHINE_END

arch/arm/mach-at91/board-stamp9g20.c

@@ -32,7 +32,7 @@
 #include "generic.h"
 
 
-void __init stamp9g20_map_io(void)
+void __init stamp9g20_init_early(void)
 {
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
@@ -44,9 +44,9 @@ void __init stamp9g20_map_io(void)
 	at91_set_serial_console(0);
 }
 
-static void __init stamp9g20evb_map_io(void)
+static void __init stamp9g20evb_init_early(void)
 {
-	stamp9g20_map_io();
+	stamp9g20_init_early();
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
 	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
@@ -54,9 +54,9 @@ static void __init stamp9g20evb_map_io(void)
 						| ATMEL_UART_DCD | ATMEL_UART_RI);
 }
 
-static void __init portuxg20_map_io(void)
+static void __init portuxg20_init_early(void)
 {
-	stamp9g20_map_io();
+	stamp9g20_init_early();
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
 	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
@@ -298,18 +298,18 @@ static void __init stamp9g20evb_board_init(void)
 
 MACHINE_START(PORTUXG20, "taskit PortuxG20")
 	/* Maintainer: taskit GmbH */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= portuxg20_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= portuxg20_init_early,
 	.init_irq	= init_irq,
 	.init_machine	= portuxg20_board_init,
 MACHINE_END
 
 MACHINE_START(STAMP9G20, "taskit Stamp9G20")
 	/* Maintainer: taskit GmbH */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= stamp9g20evb_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= stamp9g20evb_init_early,
 	.init_irq	= init_irq,
 	.init_machine	= stamp9g20evb_board_init,
 MACHINE_END

arch/arm/mach-at91/board-usb-a9260.c

@@ -48,7 +48,7 @@
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9260_initialize(12000000);
@@ -228,9 +228,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(USB_A9260, "CALAO USB_A9260")
 	/* Maintainer: calao-systems */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9260_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END

arch/arm/mach-at91/board-usb-a9263.c

@@ -47,7 +47,7 @@
 #include "generic.h"
 
 
-static void __init ek_map_io(void)
+static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.00 MHz crystal */
 	at91sam9263_initialize(12000000);
@@ -244,9 +244,9 @@ static void __init ek_board_init(void)
 
 MACHINE_START(USB_A9263, "CALAO USB_A9263")
 	/* Maintainer: calao-systems */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91sam926x_timer,
-	.map_io		= ek_map_io,
+	.map_io		= at91sam9263_map_io,
+	.init_early	= ek_init_early,
 	.init_irq	= ek_init_irq,
 	.init_machine	= ek_board_init,
 MACHINE_END

arch/arm/mach-at91/board-yl-9200.c

@@ -45,14 +45,18 @@
 #include <mach/board.h>
 #include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 
-static void __init yl9200_map_io(void)
+static void __init yl9200_init_early(void)
 {
+	/* Set cpu type: PQFP */
+	at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
+
 	/* Initialize processor: 18.432 MHz crystal */
-	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+	at91rm9200_initialize(18432000);
 
 	/* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
 	at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
@@ -594,9 +598,9 @@ static void __init yl9200_board_init(void)
 
 MACHINE_START(YL9200, "uCdragon YL-9200")
 	/* Maintainer: S.Birtles */
-	.boot_params	= AT91_SDRAM_BASE + 0x100,
 	.timer		= &at91rm9200_timer,
-	.map_io		= yl9200_map_io,
+	.map_io		= at91rm9200_map_io,
+	.init_early	= yl9200_init_early,
 	.init_irq	= yl9200_init_irq,
 	.init_machine	= yl9200_board_init,
 MACHINE_END

arch/arm/mach-at91/clock.c

@@ -163,7 +163,7 @@ static struct clk udpck = {
 	.parent		= &pllb,
 	.mode		= pmc_sys_mode,
 };
-static struct clk utmi_clk = {
+struct clk utmi_clk = {
 	.name		= "utmi_clk",
 	.parent		= &main_clk,
 	.pmc_mask	= AT91_PMC_UPLLEN,	/* in CKGR_UCKR */
@@ -182,7 +182,7 @@ static struct clk uhpck = {
  * memory, interfaces to on-chip peripherals, the AIC, and sometimes more
  * (e.g baud rate generation).  It's sourced from one of the primary clocks.
  */
-static struct clk mck = {
+struct clk mck = {
 	.name		= "mck",
 	.pmc_mask	= AT91_PMC_MCKRDY,	/* in PMC_SR */
 };
@@ -215,43 +215,6 @@ static struct clk __init *at91_css_to_clk(unsigned long css)
 	return NULL;
 }
 
-/*
- * Associate a particular clock with a function (eg, "uart") and device.
- * The drivers can then request the same 'function' with several different
- * devices and not care about which clock name to use.
- */
-void __init at91_clock_associate(const char *id, struct device *dev, const char *func)
-{
-	struct clk *clk = clk_get(NULL, id);
-
-	if (!dev || !clk || !IS_ERR(clk_get(dev, func)))
-		return;
-
-	clk->function = func;
-	clk->dev = dev;
-}
-
-/* clocks cannot be de-registered no refcounting necessary */
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	struct clk *clk;
-
-	list_for_each_entry(clk, &clocks, node) {
-		if (strcmp(id, clk->name) == 0)
-			return clk;
-		if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0)
-			return clk;
-	}
-
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
 static void __clk_enable(struct clk *clk)
 {
 	if (clk->parent)
@@ -498,32 +461,38 @@ postcore_initcall(at91_clk_debugfs_init);
 /*------------------------------------------------------------------------*/
 
 /* Register a new clock */
+static void __init at91_clk_add(struct clk *clk)
+{
+	list_add_tail(&clk->node, &clocks);
+
+	clk->cl.con_id = clk->name;
+	clk->cl.clk = clk;
+	clkdev_add(&clk->cl);
+}
+
 int __init clk_register(struct clk *clk)
 {
 	if (clk_is_peripheral(clk)) {
 		if (!clk->parent)
 			clk->parent = &mck;
 		clk->mode = pmc_periph_mode;
-		list_add_tail(&clk->node, &clocks);
 	}
 	else if (clk_is_sys(clk)) {
 		clk->parent = &mck;
 		clk->mode = pmc_sys_mode;
-
-		list_add_tail(&clk->node, &clocks);
 	}
 #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
 	else if (clk_is_programmable(clk)) {
 		clk->mode = pmc_sys_mode;
 		init_programmable_clock(clk);
-		list_add_tail(&clk->node, &clocks);
 	}
 #endif
 
+	at91_clk_add(clk);
+
 	return 0;
 }
 
-
 /*------------------------------------------------------------------------*/
 
 static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
@@ -630,7 +599,7 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
 	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
 		   cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
-		   cpu_is_at91sam9g10() || cpu_is_at572d940hf()) {
+		   cpu_is_at91sam9g10()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
 	} else if (cpu_is_at91cap9()) {
@@ -754,19 +723,19 @@ int __init at91_clock_init(unsigned long main_clock)
 
 	/* Register the PMC's standard clocks */
 	for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
-		list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
+		at91_clk_add(standard_pmc_clocks[i]);
 
 	if (cpu_has_pllb())
-		list_add_tail(&pllb.node, &clocks);
+		at91_clk_add(&pllb);
 
 	if (cpu_has_uhp())
-		list_add_tail(&uhpck.node, &clocks);
+		at91_clk_add(&uhpck);
 
 	if (cpu_has_udpfs())
-		list_add_tail(&udpck.node, &clocks);
+		at91_clk_add(&udpck);
 
 	if (cpu_has_utmi())
-		list_add_tail(&utmi_clk.node, &clocks);
+		at91_clk_add(&utmi_clk);
 
 	/* MCK and CPU clock are "always on" */
 	clk_enable(&mck);

arch/arm/mach-at91/clock.h

@@ -6,6 +6,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/clkdev.h>
+
 #define CLK_TYPE_PRIMARY	0x1
 #define CLK_TYPE_PLL		0x2
 #define CLK_TYPE_PROGRAMMABLE	0x4
@@ -16,8 +18,7 @@
 struct clk {
 	struct list_head node;
 	const char	*name;		/* unique clock name */
-	const char	*function;	/* function of the clock */
-	struct device	*dev;		/* device associated with function */
+	struct clk_lookup cl;
 	unsigned long	rate_hz;
 	struct clk	*parent;
 	u32		pmc_mask;
@@ -29,3 +30,18 @@ struct clk {
 
 
 extern int __init clk_register(struct clk *clk);
+extern struct clk mck;
+extern struct clk utmi_clk;
+
+#define CLKDEV_CON_ID(_id, _clk)			\
+	{						\
+		.con_id = _id,				\
+		.clk = _clk,				\
+	}
+
+#define CLKDEV_CON_DEV_ID(_con_id, _dev_id, _clk)	\
+	{						\
+		.con_id = _con_id,			\
+		.dev_id = _dev_id,			\
+		.clk = _clk,				\
+	}

arch/arm/mach-at91/generic.h

@@ -8,8 +8,21 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/clkdev.h>
+
+ /* Map io */
+extern void __init at91rm9200_map_io(void);
+extern void __init at91sam9260_map_io(void);
+extern void __init at91sam9261_map_io(void);
+extern void __init at91sam9263_map_io(void);
+extern void __init at91sam9rl_map_io(void);
+extern void __init at91sam9g45_map_io(void);
+extern void __init at91x40_map_io(void);
+extern void __init at91cap9_map_io(void);
+
  /* Processors */
-extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
+extern void __init at91rm9200_set_type(int type);
+extern void __init at91rm9200_initialize(unsigned long main_clock);
 extern void __init at91sam9260_initialize(unsigned long main_clock);
 extern void __init at91sam9261_initialize(unsigned long main_clock);
 extern void __init at91sam9263_initialize(unsigned long main_clock);
@@ -17,7 +30,6 @@ extern void __init at91sam9rl_initialize(unsigned long main_clock);
 extern void __init at91sam9g45_initialize(unsigned long main_clock);
 extern void __init at91x40_initialize(unsigned long main_clock);
 extern void __init at91cap9_initialize(unsigned long main_clock);
-extern void __init at572d940hf_initialize(unsigned long main_clock);
 
  /* Interrupts */
 extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
@@ -28,7 +40,6 @@ extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
 extern void __init at91x40_init_interrupts(unsigned int priority[]);
 extern void __init at91cap9_init_interrupts(unsigned int priority[]);
-extern void __init at572d940hf_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
 
  /* Timer */
@@ -39,8 +50,19 @@ extern struct sys_timer at91x40_timer;
 
  /* Clocks */
 extern int __init at91_clock_init(unsigned long main_clock);
+/*
+ * function to specify the clock of the default console. As we do not
+ * use the device/driver bus, the dev_name is not intialize. So we need
+ * to link the clock to a specific con_id only "usart"
+ */
+extern void __init at91rm9200_set_console_clock(int id);
+extern void __init at91sam9260_set_console_clock(int id);
+extern void __init at91sam9261_set_console_clock(int id);
+extern void __init at91sam9263_set_console_clock(int id);
+extern void __init at91sam9rl_set_console_clock(int id);
+extern void __init at91sam9g45_set_console_clock(int id);
+extern void __init at91cap9_set_console_clock(int id);
 struct device;
-extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func);
 
  /* Power Management */
 extern void at91_irq_suspend(void);

arch/arm/mach-at91/include/mach/at572d940hf.h

@@ -1,123 +0,0 @@
-/*
- * include/mach/at572d940hf.h
- *
- * Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2008 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#ifndef AT572D940HF_H
-#define AT572D940HF_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-#define AT572D940HF_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT572D940HF_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT572D940HF_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT572D940HF_ID_EMAC	5	/* MACB ethernet controller */
-#define AT572D940HF_ID_US0	6	/* USART 0 */
-#define AT572D940HF_ID_US1	7	/* USART 1 */
-#define AT572D940HF_ID_US2	8	/* USART 2 */
-#define AT572D940HF_ID_MCI	9	/* Multimedia Card Interface */
-#define AT572D940HF_ID_UDP	10	/* USB Device Port */
-#define AT572D940HF_ID_TWI0	11	/* Two-Wire Interface 0 */
-#define AT572D940HF_ID_SPI0	12	/* Serial Peripheral Interface 0 */
-#define AT572D940HF_ID_SPI1	13	/* Serial Peripheral Interface 1 */
-#define AT572D940HF_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT572D940HF_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT572D940HF_ID_SSC2	16	/* Serial Synchronous Controller 2 */
-#define AT572D940HF_ID_TC0	17	/* Timer Counter 0 */
-#define AT572D940HF_ID_TC1	18	/* Timer Counter 1 */
-#define AT572D940HF_ID_TC2	19	/* Timer Counter 2 */
-#define AT572D940HF_ID_UHP	20	/* USB Host port */
-#define AT572D940HF_ID_SSC3	21	/* Serial Synchronous Controller 3 */
-#define AT572D940HF_ID_TWI1	22	/* Two-Wire Interface 1 */
-#define AT572D940HF_ID_CAN0	23	/* CAN Controller 0 */
-#define AT572D940HF_ID_CAN1	24	/* CAN Controller 1 */
-#define AT572D940HF_ID_MHALT	25	/* mAgicV HALT line */
-#define AT572D940HF_ID_MSIRQ0	26	/* mAgicV SIRQ0 line */
-#define AT572D940HF_ID_MEXC	27	/* mAgicV exception line */
-#define AT572D940HF_ID_MEDMA	28	/* mAgicV end of DMA line */
-#define AT572D940HF_ID_IRQ0	29	/* External Interrupt Source (IRQ0) */
-#define AT572D940HF_ID_IRQ1	30	/* External Interrupt Source (IRQ1) */
-#define AT572D940HF_ID_IRQ2	31	/* External Interrupt Source (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT572D940HF_BASE_TCB	0xfffa0000
-#define AT572D940HF_BASE_TC0	0xfffa0000
-#define AT572D940HF_BASE_TC1	0xfffa0040
-#define AT572D940HF_BASE_TC2	0xfffa0080
-#define AT572D940HF_BASE_UDP	0xfffa4000
-#define AT572D940HF_BASE_MCI	0xfffa8000
-#define AT572D940HF_BASE_TWI0	0xfffac000
-#define AT572D940HF_BASE_US0	0xfffb0000
-#define AT572D940HF_BASE_US1	0xfffb4000
-#define AT572D940HF_BASE_US2	0xfffb8000
-#define AT572D940HF_BASE_SSC0	0xfffbc000
-#define AT572D940HF_BASE_SSC1	0xfffc0000
-#define AT572D940HF_BASE_SSC2	0xfffc4000
-#define AT572D940HF_BASE_SPI0	0xfffc8000
-#define AT572D940HF_BASE_SPI1	0xfffcc000
-#define AT572D940HF_BASE_SSC3	0xfffd0000
-#define AT572D940HF_BASE_TWI1	0xfffd4000
-#define AT572D940HF_BASE_EMAC	0xfffd8000
-#define AT572D940HF_BASE_CAN0	0xfffdc000
-#define AT572D940HF_BASE_CAN1	0xfffe0000
-#define AT91_BASE_SYS		0xffffea00
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-
-#define AT91_USART0	AT572D940HF_ID_US0
-#define AT91_USART1	AT572D940HF_ID_US1
-#define AT91_USART2	AT572D940HF_ID_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT572D940HF_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT572D940HF_SRAM_SIZE	(48 * SZ_1K)	/* Internal SRAM size (48Kb) */
-
-#define AT572D940HF_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT572D940HF_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT572D940HF_UHP_BASE	0x00500000	/* USB Host controller */
-
-
-#endif

arch/arm/mach-at91/include/mach/at572d940hf_matrix.h

@@ -1,123 +0,0 @@
-/*
- * include/mach//at572d940hf_matrix.h
- *
- * Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2008 Atmel
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef AT572D940HF_MATRIX_H
-#define AT572D940HF_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
-
-#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(0x7  << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
-
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_SFR0	(AT91_MATRIX + 0x110)	/* Special Function Register 0 */
-#define AT91_MATRIX_SFR1	(AT91_MATRIX + 0x114)	/* Special Function Register 1 */
-#define AT91_MATRIX_SFR2	(AT91_MATRIX + 0x118)	/* Special Function Register 2 */
-#define AT91_MATRIX_SFR3	(AT91_MATRIX + 0x11C)	/* Special Function Register 3 */
-#define AT91_MATRIX_SFR4	(AT91_MATRIX + 0x120)	/* Special Function Register 4 */
-#define AT91_MATRIX_SFR5	(AT91_MATRIX + 0x124)	/* Special Function Register 5 */
-#define AT91_MATRIX_SFR6	(AT91_MATRIX + 0x128)	/* Special Function Register 6 */
-#define AT91_MATRIX_SFR7	(AT91_MATRIX + 0x12C)	/* Special Function Register 7 */
-#define AT91_MATRIX_SFR8	(AT91_MATRIX + 0x130)	/* Special Function Register 8 */
-#define AT91_MATRIX_SFR9	(AT91_MATRIX + 0x134)	/* Special Function Register 9 */
-#define AT91_MATRIX_SFR10	(AT91_MATRIX + 0x138)	/* Special Function Register 10 */
-#define AT91_MATRIX_SFR11	(AT91_MATRIX + 0x13C)	/* Special Function Register 11 */
-#define AT91_MATRIX_SFR12	(AT91_MATRIX + 0x140)	/* Special Function Register 12 */
-#define AT91_MATRIX_SFR13	(AT91_MATRIX + 0x144)	/* Special Function Register 13 */
-#define AT91_MATRIX_SFR14	(AT91_MATRIX + 0x148)	/* Special Function Register 14 */
-#define AT91_MATRIX_SFR15	(AT91_MATRIX + 0x14C)	/* Special Function Register 15 */
-
-
-/*
- * The following registers / bits are not defined in the Datasheet (Revision A)
- */
-
-#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x100)	/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define			AT91_MATRIX_ITCM_64		(7 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-#define			AT91_MATRIX_DTCM_64		(7 << 4)
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-
-#endif

arch/arm/mach-at91/include/mach/at91cap9.h

@@ -20,8 +20,6 @@
 /*
  * Peripheral identifiers/interrupts.
  */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
 #define AT91CAP9_ID_PIOABCD	2	/* Parallel IO Controller A, B, C and D */
 #define AT91CAP9_ID_MPB0	3	/* MP Block Peripheral 0 */
 #define AT91CAP9_ID_MPB1	4	/* MP Block Peripheral 1 */
@@ -123,6 +121,4 @@
 #define AT91CAP9_UDPHS_FIFO	0x00600000	/* USB High Speed Device Port */
 #define AT91CAP9_UHP_BASE	0x00700000	/* USB Host controller */
 
-#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
-
 #endif

arch/arm/mach-at91/include/mach/at91rm9200.h

@@ -19,8 +19,6 @@
 /*
  * Peripheral identifiers/interrupts.
  */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripheral */
 #define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
 #define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
 #define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */

arch/arm/mach-at91/include/mach/at91sam9260.h

@@ -20,8 +20,6 @@
 /*
  * Peripheral identifiers/interrupts.
  */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
 #define AT91SAM9260_ID_PIOA	2	/* Parallel IO Controller A */
 #define AT91SAM9260_ID_PIOB	3	/* Parallel IO Controller B */
 #define AT91SAM9260_ID_PIOC	4	/* Parallel IO Controller C */

arch/arm/mach-at91/include/mach/at91sam9261.h

@@ -18,8 +18,6 @@
 /*
  * Peripheral identifiers/interrupts.
  */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
 #define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
 #define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
 #define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */

arch/arm/mach-at91/include/mach/at91sam9263.h

@@ -18,8 +18,6 @@
 /*
  * Peripheral identifiers/interrupts.
  */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
 #define AT91SAM9263_ID_PIOA	2	/* Parallel IO Controller A */
 #define AT91SAM9263_ID_PIOB	3	/* Parallel IO Controller B */
 #define AT91SAM9263_ID_PIOCDE	4	/* Parallel IO Controller C, D and E */

arch/arm/mach-at91/include/mach/at91sam9g45.h

@@ -18,8 +18,6 @@
 /*
  * Peripheral identifiers/interrupts.
  */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Controller Interrupt */
 #define AT91SAM9G45_ID_PIOA	2	/* Parallel I/O Controller A */
 #define AT91SAM9G45_ID_PIOB	3	/* Parallel I/O Controller B */
 #define AT91SAM9G45_ID_PIOC	4	/* Parallel I/O Controller C */
@@ -131,8 +129,6 @@
 #define AT91SAM9G45_EHCI_BASE	0x00800000	/* USB Host controller (EHCI) */
 #define AT91SAM9G45_VDEC_BASE	0x00900000	/* Video Decoder Controller */
 
-#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
-
 #define CONSISTENT_DMA_SIZE	SZ_4M
 
 /*

arch/arm/mach-at91/include/mach/at91sam9rl.h

@@ -17,8 +17,6 @@
 /*
  * Peripheral identifiers/interrupts.
  */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Controller */
 #define AT91SAM9RL_ID_PIOA	2	/* Parallel IO Controller A */
 #define AT91SAM9RL_ID_PIOB	3	/* Parallel IO Controller B */
 #define AT91SAM9RL_ID_PIOC	4	/* Parallel IO Controller C */

arch/arm/mach-at91/include/mach/at91x40.h

@@ -15,8 +15,6 @@
 /*
  *	IRQ list.
  */
-#define AT91_ID_FIQ		0	/* FIQ */
-#define AT91_ID_SYS		1	/* System Peripheral */
 #define AT91X40_ID_USART0	2	/* USART port 0 */
 #define AT91X40_ID_USART1	3	/* USART port 1 */
 #define AT91X40_ID_TC0		4	/* Timer/Counter 0 */

arch/arm/mach-at91/include/mach/board.h

@@ -90,7 +90,7 @@ struct at91_eth_data {
 extern void __init at91_add_device_eth(struct at91_eth_data *data);
 
 #if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
-	|| defined(CONFIG_ARCH_AT91SAM9G45) || defined(CONFIG_ARCH_AT572D940HF)
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 #define eth_platform_data	at91_eth_data
 #endif
 
@@ -140,6 +140,7 @@ extern void __init at91_set_serial_console(unsigned portnr);
 extern struct platform_device *atmel_default_console_device;
 
 struct atmel_uart_data {
+	int			num;		/* port num */
 	short			use_dma_tx;	/* use transmit DMA? */
 	short			use_dma_rx;	/* use receive DMA? */
 	void __iomem		*regs;		/* virt. base address, if any */
@@ -203,9 +204,6 @@ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
 extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
 extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
 
- /* AT572D940HF DSP */
-extern void __init at91_add_device_mAgic(void);
-
 /* FIXME: this needs a better location, but gets stuff building again */
 extern int at91_suspend_entering_slow_clock(void);
 

arch/arm/mach-at91/include/mach/clkdev.h

@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif

arch/arm/mach-at91/include/mach/cpu.h

@@ -34,8 +34,6 @@
 #define ARCH_ID_AT91SAM9XE256	0x329a93a0
 #define ARCH_ID_AT91SAM9XE512	0x329aa3a0
 
-#define ARCH_ID_AT572D940HF	0x0e0303e0
-
 #define ARCH_ID_AT91M40800	0x14080044
 #define ARCH_ID_AT91R40807	0x44080746
 #define ARCH_ID_AT91M40807	0x14080745
@@ -90,9 +88,16 @@ static inline unsigned long at91cap9_rev_identify(void)
 #endif
 
 #ifdef CONFIG_ARCH_AT91RM9200
+extern int rm9200_type;
+#define ARCH_REVISON_9200_BGA	(0 << 0)
+#define ARCH_REVISON_9200_PQFP	(1 << 0)
 #define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
+#define cpu_is_at91rm9200_bga()	(!cpu_is_at91rm9200_pqfp())
+#define cpu_is_at91rm9200_pqfp() (cpu_is_at91rm9200() && rm9200_type & ARCH_REVISON_9200_PQFP)
 #else
 #define cpu_is_at91rm9200()	(0)
+#define cpu_is_at91rm9200_bga()	(0)
+#define cpu_is_at91rm9200_pqfp() (0)
 #endif
 
 #ifdef CONFIG_ARCH_AT91SAM9260
@@ -181,12 +186,6 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91cap9_revC()	(0)
 #endif
 
-#ifdef CONFIG_ARCH_AT572D940HF
-#define cpu_is_at572d940hf() (at91_cpu_identify() == ARCH_ID_AT572D940HF)
-#else
-#define cpu_is_at572d940hf() (0)
-#endif
-
 /*
  * Since this is ARM, we will never run on any AVR32 CPU. But these
  * definitions may reduce clutter in common drivers.

arch/arm/mach-at91/include/mach/hardware.h

@@ -32,13 +32,17 @@
 #include <mach/at91cap9.h>
 #elif defined(CONFIG_ARCH_AT91X40)
 #include <mach/at91x40.h>
-#elif defined(CONFIG_ARCH_AT572D940HF)
-#include <mach/at572d940hf.h>
 #else
 #error "Unsupported AT91 processor"
 #endif
 
 
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+
 #ifdef CONFIG_MMU
 /*
  * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
@@ -82,13 +86,6 @@
 #define AT91_CHIPSELECT_6	0x70000000
 #define AT91_CHIPSELECT_7	0x80000000
 
-/* SDRAM */
-#ifdef CONFIG_DRAM_BASE
-#define AT91_SDRAM_BASE		CONFIG_DRAM_BASE
-#else
-#define AT91_SDRAM_BASE		AT91_CHIPSELECT_1
-#endif
-
 /* Clocks */
 #define AT91_SLOW_CLOCK		32768		/* slow clock */
 

arch/arm/mach-at91/include/mach/memory.h

@@ -23,6 +23,4 @@
 
 #include <mach/hardware.h>
 
-#define PLAT_PHYS_OFFSET	(AT91_SDRAM_BASE)
-
 #endif

arch/arm/mach-at91/include/mach/stamp9g20.h

@@ -1,7 +1,7 @@
 #ifndef __MACH_STAMP9G20_H
 #define __MACH_STAMP9G20_H
 
-void stamp9g20_map_io(void);
+void stamp9g20_init_early(void);
 void stamp9g20_board_init(void);
 
 #endif

arch/arm/mach-at91/include/mach/system_rev.h

@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Under GPLv2 only
+ */
+
+#ifndef __ARCH_SYSTEM_REV_H__
+#define __ARCH_SYSTEM_REV_H__
+
+/*
+ * board revision encoding
+ * mach specific
+ * the 16-31 bit are reserved for at91 generic information
+ *
+ * bit 31:
+ *	0 => nand 16 bit
+ *	1 => nand 8 bit
+ */
+#define BOARD_HAVE_NAND_8BIT	(1 << 31)
+static int inline board_have_nand_8bit(void)
+{
+	return system_rev & BOARD_HAVE_NAND_8BIT;
+}
+
+#endif /* __ARCH_SYSTEM_REV_H__ */

arch/arm/mach-at91/include/mach/timex.h

@@ -82,11 +82,6 @@
 #define AT91X40_MASTER_CLOCK	40000000
 #define CLOCK_TICK_RATE		(AT91X40_MASTER_CLOCK)
 
-#elif defined(CONFIG_ARCH_AT572D940HF)
-
-#define AT572D940HF_MASTER_CLOCK	80000000
-#define CLOCK_TICK_RATE		(AT572D940HF_MASTER_CLOCK/16)
-
 #endif
 
 #endif

arch/arm/mach-tegra/include/mach/kbc.h

@@ -50,13 +50,11 @@ struct tegra_kbc_platform_data {
 	unsigned int debounce_cnt;
 	unsigned int repeat_cnt;
 
-	unsigned int wake_cnt; /* 0:wake on any key >1:wake on wake_cfg */
-	const struct tegra_kbc_wake_key *wake_cfg;
-
 	struct tegra_kbc_pin_cfg pin_cfg[KBC_MAX_GPIO];
 	const struct matrix_keymap_data *keymap_data;
 
 	bool wakeup;
 	bool use_fn_map;
+	bool use_ghost_filter;
 };
 #endif

arch/arm/mach-ux500/board-mop500.c

@@ -204,7 +204,7 @@ static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
 	},
 };
 
-#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \
+#define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, t_out, _sm)	\
 static struct nmk_i2c_controller u8500_i2c##id##_data = { \
 	/*				\
 	 * slave data setup time, which is	\
@@ -219,19 +219,21 @@ static struct nmk_i2c_controller u8500_i2c##id##_data = { \
 	.rft		= _rft,		\
 	/* std. mode operation */	\
 	.clk_freq	= clk,		\
+	/* Slave response timeout(ms) */\
+	.timeout	= t_out,	\
 	.sm		= _sm,		\
 }
 
 /*
  * The board uses 4 i2c controllers, initialize all of
  * them with slave data setup time of 250 ns,
- * Tx & Rx FIFO threshold values as 1 and standard
+ * Tx & Rx FIFO threshold values as 8 and standard
  * mode of operation
  */
-U8500_I2C_CONTROLLER(0, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-U8500_I2C_CONTROLLER(2,	0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
-U8500_I2C_CONTROLLER(3,	0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD);
+U8500_I2C_CONTROLLER(0, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(2,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
+U8500_I2C_CONTROLLER(3,	0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
 
 static void __init mop500_i2c_init(void)
 {

arch/arm/plat-nomadik/include/plat/i2c.h

@@ -11,8 +11,8 @@
 enum i2c_freq_mode {
 	I2C_FREQ_MODE_STANDARD,		/* up to 100 Kb/s */
 	I2C_FREQ_MODE_FAST,		/* up to 400 Kb/s */
+	I2C_FREQ_MODE_HIGH_SPEED,	/* up to 3.4 Mb/s */
 	I2C_FREQ_MODE_FAST_PLUS,	/* up to 1 Mb/s */
-	I2C_FREQ_MODE_HIGH_SPEED	/* up to 3.4 Mb/s */
 };
 
 /**
@@ -24,13 +24,15 @@ enum i2c_freq_mode {
  *		to the values of 14, 6, 2 for a 48 MHz i2c clk
  * @tft:	Tx FIFO Threshold in bytes
  * @rft:	Rx FIFO Threshold in bytes
+ * @timeout	Slave response timeout(ms)
  * @sm:		speed mode
  */
 struct nmk_i2c_controller {
 	unsigned long	clk_freq;
 	unsigned short	slsu;
-	unsigned char 	tft;
-	unsigned char 	rft;
+	unsigned char	tft;
+	unsigned char	rft;
+	int timeout;
 	enum i2c_freq_mode	sm;
 };
 

arch/avr32/mach-at32ap/at32ap700x.c

@@ -1014,6 +1014,7 @@ static struct platform_device *__initdata at32_usarts[4];
 void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags)
 {
 	struct platform_device *pdev;
+	struct atmel_uart_data *pdata;
 
 	switch (hw_id) {
 	case 0:
@@ -1042,7 +1043,8 @@ void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags)
 		data->regs = (void __iomem *)pdev->resource[0].start;
 	}
 
-	pdev->id = line;
+	pdata = pdev->dev.platform_data;
+	pdata->num = portnr;
 	at32_usarts[line] = pdev;
 }