rapidio: use stored ingress port number instead of register read

The switch port information is obtained and stored during RIO device
setup.  Therefore repeated reads from Switch Port Information CAR may be
removed.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rapidio/rio-scan.c

@@ -420,6 +420,11 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
 						hopcount, RIO_EFB_ERR_MGMNT);
 	}
 
+	if (rdev->pef & (RIO_PEF_SWITCH | RIO_PEF_MULTIPORT)) {
+		rio_mport_read_config_32(port, destid, hopcount,
+					 RIO_SWP_INFO_CAR, &rdev->swpinfo);
+	}
+
 	rio_mport_read_config_32(port, destid, hopcount, RIO_SRC_OPS_CAR,
 				 &rdev->src_ops);
 	rio_mport_read_config_32(port, destid, hopcount, RIO_DST_OPS_CAR,
@@ -439,8 +444,6 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
 
 	/* If a PE has both switch and other functions, show it as a switch */
 	if (rio_is_switch(rdev)) {
-		rio_mport_read_config_32(port, destid, hopcount,
-					 RIO_SWP_INFO_CAR, &rdev->swpinfo);
 		rswitch = kzalloc(sizeof(struct rio_switch), GFP_KERNEL);
 		if (!rswitch)
 			goto cleanup;
@@ -458,6 +461,7 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
 				rdid++)
 			rswitch->route_table[rdid] = RIO_INVALID_ROUTE;
 		rdev->rswitch = rswitch;
+		rswitch->rdev = rdev;
 		dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id,
 			     rdev->rswitch->switchid);
 		rio_switch_init(rdev, do_enum);
@@ -718,25 +722,6 @@ static u16 rio_get_host_deviceid_lock(struct rio_mport *port, u8 hopcount)
 	return (u16) (result & 0xffff);
 }
 
-/**
- * rio_get_swpinfo_inport- Gets the ingress port number
- * @mport: Master port to send transaction
- * @destid: Destination ID associated with the switch
- * @hopcount: Number of hops to the device
- *
- * Returns port number being used to access the switch device.
- */
-static u8
-rio_get_swpinfo_inport(struct rio_mport *mport, u16 destid, u8 hopcount)
-{
-	u32 result;
-
-	rio_mport_read_config_32(mport, destid, hopcount, RIO_SWP_INFO_CAR,
-				 &result);
-
-	return (u8) (result & 0xff);
-}
-
 /**
  * rio_get_swpinfo_tports- Gets total number of ports on the switch
  * @mport: Master port to send transaction
@@ -834,8 +819,7 @@ static int __devinit rio_enum_peer(struct rio_net *net, struct rio_mport *port,
 
 	if (rio_is_switch(rdev)) {
 		next_switchid++;
-		sw_inport = rio_get_swpinfo_inport(port,
-				RIO_ANY_DESTID(port->sys_size), hopcount);
+		sw_inport = RIO_GET_PORT_NUM(rdev->swpinfo);
 		rio_route_add_entry(port, rdev->rswitch, RIO_GLOBAL_TABLE,
 				    port->host_deviceid, sw_inport, 0);
 		rdev->rswitch->route_table[port->host_deviceid] = sw_inport;
@@ -989,8 +973,7 @@ rio_disc_peer(struct rio_net *net, struct rio_mport *port, u16 destid,
 		    "RIO: found %s (vid %4.4x did %4.4x) with %d ports\n",
 		    rio_name(rdev), rdev->vid, rdev->did, num_ports);
 		for (port_num = 0; port_num < num_ports; port_num++) {
-			if (rio_get_swpinfo_inport(port, destid, hopcount) ==
-			    port_num)
+			if (RIO_GET_PORT_NUM(rdev->swpinfo) == port_num)
 				continue;
 
 			if (rio_sport_is_active
@@ -1109,8 +1092,7 @@ static void rio_update_route_tables(struct rio_mport *port)
 				if (rswitch->destid == destid)
 					continue;
 
-				sport = rio_get_swpinfo_inport(port,
-						rswitch->destid, rswitch->hopcount);
+				sport = RIO_GET_PORT_NUM(rswitch->rdev->swpinfo);
 
 				if (rswitch->add_entry)	{
 					rio_route_add_entry(port, rswitch,

include/linux/rio.h

@@ -112,7 +112,7 @@ struct rio_dev {
 	u16 asm_rev;
 	u16 efptr;
 	u32 pef;
-	u32 swpinfo;		/* Only used for switches */
+	u32 swpinfo;
 	u32 src_ops;
 	u32 dst_ops;
 	u32 comp_tag;
@@ -219,6 +219,7 @@ struct rio_net {
 /**
  * struct rio_switch - RIO switch info
  * @node: Node in global list of switches
+ * @rdev: Associated RIO device structure
  * @switchid: Switch ID that is unique across a network
  * @hopcount: Hopcount to this switch
  * @destid: Associated destid in the path
@@ -234,6 +235,7 @@ struct rio_net {
  */
 struct rio_switch {
 	struct list_head node;
+	struct rio_dev *rdev;
 	u16 switchid;
 	u16 hopcount;
 	u16 destid;

include/linux/rio_regs.h

@@ -33,6 +33,7 @@
 #define  RIO_PEF_MEMORY			0x40000000	/* [I] MMIO */
 #define  RIO_PEF_PROCESSOR		0x20000000	/* [I] Processor */
 #define  RIO_PEF_SWITCH			0x10000000	/* [I] Switch */
+#define  RIO_PEF_MULTIPORT		0x08000000	/* [VI, 2.1] Multiport */
 #define  RIO_PEF_INB_MBOX		0x00f00000	/* [II] Mailboxes */
 #define  RIO_PEF_INB_MBOX0		0x00800000	/* [II] Mailbox 0 */
 #define  RIO_PEF_INB_MBOX1		0x00400000	/* [II] Mailbox 1 */
@@ -51,6 +52,7 @@
 #define  RIO_SWP_INFO_PORT_TOTAL_MASK	0x0000ff00	/* [I] Total number of ports */
 #define  RIO_SWP_INFO_PORT_NUM_MASK	0x000000ff	/* [I] Maintenance transaction port number */
 #define  RIO_GET_TOTAL_PORTS(x)		((x & RIO_SWP_INFO_PORT_TOTAL_MASK) >> 8)
+#define  RIO_GET_PORT_NUM(x)		(x & RIO_SWP_INFO_PORT_NUM_MASK)
 
 #define RIO_SRC_OPS_CAR		0x18	/* [I] Source Operations CAR */
 #define  RIO_SRC_OPS_READ		0x00008000	/* [I] Read op */