mei: don't use cached value for hcsr in mei_hw_reset

Open code mei_hw_reset to avoid using cached hcsr.
Using cached hcsr can cause unwanted side effects.

Move mei_hw_restet function to hw-me.c as it is hw dependent

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/misc/mei/hw-me.c

@@ -132,6 +132,41 @@ void mei_disable_interrupts(struct mei_device *dev)
 	mei_hcsr_set(dev);
 }
 
+/**
+ * mei_hw_reset - resets fw via mei csr register.
+ *
+ * @dev: the device structure
+ * @interrupts_enabled: if interrupt should be enabled after reset.
+ */
+void mei_hw_reset(struct mei_device *dev, bool intr_enable)
+{
+	u32 hcsr = mei_hcsr_read(dev);
+
+	dev_dbg(&dev->pdev->dev, "before reset HCSR = 0x%08x.\n", hcsr);
+
+	hcsr |= (H_RST | H_IG);
+
+	if (intr_enable)
+		hcsr |= H_IE;
+	else
+		hcsr &= ~H_IE;
+
+	hcsr &= ~H_IS;
+
+	mei_reg_write(dev, H_CSR, hcsr);
+	hcsr = mei_hcsr_read(dev);
+
+	hcsr &= ~H_RST;
+	hcsr |= H_IG;
+	hcsr &= ~H_IS;
+
+	mei_reg_write(dev, H_CSR, hcsr);
+
+	hcsr = mei_hcsr_read(dev);
+
+	dev_dbg(&dev->pdev->dev, "current HCSR = 0x%08x.\n", hcsr);
+}
+
 
 /**
  * mei_interrupt_quick_handler - The ISR of the MEI device

drivers/misc/mei/init.c

@@ -169,22 +169,6 @@ out:
 	return ret;
 }
 
-/**
- * mei_hw_reset - resets fw via mei csr register.
- *
- * @dev: the device structure
- * @interrupts_enabled: if interrupt should be enabled after reset.
- */
-static void mei_hw_reset(struct mei_device *dev, int interrupts_enabled)
-{
-	dev->host_hw_state |= (H_RST | H_IG);
-
-	if (interrupts_enabled)
-		mei_enable_interrupts(dev);
-	else
-		mei_disable_interrupts(dev);
-}
-
 /**
  * mei_reset - resets host and fw.
  *
@@ -207,20 +191,8 @@ void mei_reset(struct mei_device *dev, int interrupts_enabled)
 			dev->dev_state != MEI_DEV_POWER_DOWN &&
 			dev->dev_state != MEI_DEV_POWER_UP);
 
-	dev->host_hw_state = mei_hcsr_read(dev);
-
-	dev_dbg(&dev->pdev->dev, "before reset host_hw_state = 0x%08x.\n",
-	    dev->host_hw_state);
-
 	mei_hw_reset(dev, interrupts_enabled);
 
-	dev->host_hw_state &= ~H_RST;
-	dev->host_hw_state |= H_IG;
-
-	mei_hcsr_set(dev);
-
-	dev_dbg(&dev->pdev->dev, "currently saved host_hw_state = 0x%08x.\n",
-	    dev->host_hw_state);
 
 	if (dev->dev_state != MEI_DEV_INITIALIZING) {
 		if (dev->dev_state != MEI_DEV_DISABLED &&

drivers/misc/mei/mei_dev.h

@@ -385,6 +385,7 @@ void mei_watchdog_unregister(struct mei_device *dev);
  * Register Access Function
  */
 
+void mei_hw_reset(struct mei_device *dev, bool intr_enable);
 u32 mei_hcsr_read(const struct mei_device *dev);
 void mei_hcsr_set(struct mei_device *dev);
 u32 mei_mecsr_read(const struct mei_device *dev);