[PATCH] RTC subsystem: fix proc output

Move the "24hr: yes" proc output from drivers to rtc proc code.  This is
required because the time value in the proc output is always in 24hr mode
regardless of the driver.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/rtc/rtc-ep93xx.c

@@ -67,7 +67,6 @@ static int ep93xx_rtc_proc(struct device *dev, struct seq_file *seq)
 
 	ep93xx_get_swcomp(dev, &preload, &delete);
 
-	seq_printf(seq, "24hr\t\t: yes\n");
 	seq_printf(seq, "preload\t\t: %d\n", preload);
 	seq_printf(seq, "delete\t\t: %d\n", delete);
 

drivers/rtc/rtc-m48t86.c

@@ -127,9 +127,6 @@ static int m48t86_rtc_proc(struct device *dev, struct seq_file *seq)
 
 	reg = ops->readb(M48T86_REG_B);
 
-	seq_printf(seq, "24hr\t\t: %s\n",
-		 (reg & M48T86_REG_B_H24) ? "yes" : "no");
-
 	seq_printf(seq, "mode\t\t: %s\n",
 		 (reg & M48T86_REG_B_DM) ? "binary" : "bcd");
 

drivers/rtc/rtc-pcf8563.c

@@ -227,14 +227,7 @@ static int pcf8563_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	return pcf8563_set_datetime(to_i2c_client(dev), tm);
 }
 
-static int pcf8563_rtc_proc(struct device *dev, struct seq_file *seq)
-{
-	seq_printf(seq, "24hr\t\t: yes\n");
-	return 0;
-}
-
 static struct rtc_class_ops pcf8563_rtc_ops = {
-	.proc		= pcf8563_rtc_proc,
 	.read_time	= pcf8563_rtc_read_time,
 	.set_time	= pcf8563_rtc_set_time,
 };

drivers/rtc/rtc-proc.c

@@ -71,6 +71,8 @@ static int rtc_proc_show(struct seq_file *seq, void *offset)
 				alrm.pending ? "yes" : "no");
 	}
 
+	seq_printf(seq, "24hr\t\t: yes\n");
+
 	if (ops->proc)
 		ops->proc(class_dev->dev, seq);
 

drivers/rtc/rtc-rs5c372.c

@@ -151,9 +151,8 @@ static int rs5c372_rtc_proc(struct device *dev, struct seq_file *seq)
 {
 	int err, osc, trim;
 
-	seq_printf(seq, "24hr\t\t: yes\n");
-
-	if ((err = rs5c372_get_trim(to_i2c_client(dev), &osc, &trim)) == 0) {
+	err = rs5c372_get_trim(to_i2c_client(dev), &osc, &trim);
+	if (err == 0) {
 		seq_printf(seq, "%d.%03d KHz\n", osc / 1000, osc % 1000);
 		seq_printf(seq, "trim\t: %d\n", trim);
 	}

drivers/rtc/rtc-test.c

@@ -49,7 +49,6 @@ static int test_rtc_proc(struct device *dev, struct seq_file *seq)
 {
 	struct platform_device *plat_dev = to_platform_device(dev);
 
-	seq_printf(seq, "24hr\t\t: yes\n");
 	seq_printf(seq, "test\t\t: yes\n");
 	seq_printf(seq, "id\t\t: %d\n", plat_dev->id);
 

drivers/rtc/rtc-x1205.c

@@ -451,8 +451,6 @@ static int x1205_rtc_proc(struct device *dev, struct seq_file *seq)
 {
 	int err, dtrim, atrim;
 
-	seq_printf(seq, "24hr\t\t: yes\n");
-
 	if ((err = x1205_get_dtrim(to_i2c_client(dev), &dtrim)) == 0)
 		seq_printf(seq, "digital_trim\t: %d ppm\n", dtrim);