merge 2.6.13-rc4 with ACPI's to-linus tree

Documentation/pcmcia/driver-changes.txt

@@ -56,3 +56,12 @@ This file details changes in 2.6 which affect PCMCIA card driver authors:
    memory regions in-use. The name argument should be a pointer to
    your driver name. Eg, for pcnet_cs, name should point to the
    string "pcnet_cs".
+
+* CardServices is gone
+  CardServices() in 2.4 is just a big switch statement to call various
+  services.  In 2.6, all of those entry points are exported and called
+  directly (except for pcmcia_report_error(), just use cs_error() instead).
+
+* struct pcmcia_driver
+  You need to use struct pcmcia_driver and pcmcia_{un,}register_driver
+  instead of {un,}register_pccard_driver

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -636,11 +636,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  3stack-digout	3-jack in back, a HP out and a SPDIF out
 	  5stack	5-jack in back, 2-jack in front
 	  5stack-digout	5-jack in back, 2-jack in front, a SPDIF out
+	  6stack	6-jack in back, 2-jack in front
+	  6stack-digout	6-jack with a SPDIF out
 	  w810		3-jack
 	  z71v		3-jack (HP shared SPDIF)
 	  asus		3-jack
 	  uniwill	3-jack
 	  F1734		2-jack
+	  test		for testing/debugging purpose, almost all controls can be
+			adjusted.  Appearing only when compiled with
+			$CONFIG_SND_DEBUG=y
 
 	CMI9880
 	  minimal	3-jack in back
@@ -1054,6 +1059,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
+  Module snd-pxa2xx-ac97 (on arm only)
+  ------------------------------------
+
+    Module for AC97 driver for the Intel PXA2xx chip
+
+    For ARM architecture only.
+
   Module snd-rme32
   ----------------
 
@@ -1173,6 +1185,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Module supports up to 8 cards.
 
+  Module snd-sun-dbri (on sparc only)
+  -----------------------------------
+
+    Module for DBRI sound chips found on Sparcs.
+
+    Module supports up to 8 cards.
+
   Module snd-wavefront
   --------------------
 
@@ -1371,7 +1390,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   Module snd-vxpocket
   -------------------
 
-    Module for Digigram VX-Pocket VX2 PCMCIA card.
+    Module for Digigram VX-Pocket VX2 and 440 PCMCIA cards.
 
     ibl      - Capture IBL size. (default = 0, minimum size)
 
@@ -1391,29 +1410,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Note: the driver is build only when CONFIG_ISA is set.
     
-  Module snd-vxp440
-  -----------------
-
-    Module for Digigram VX-Pocket 440 PCMCIA card.
-
-    ibl      - Capture IBL size. (default = 0, minimum size)
-
-    Module supports up to 8 cards.  The module is compiled only when
-    PCMCIA is supported on kernel.
-
-    To activate the driver via the card manager, you'll need to set
-    up /etc/pcmcia/vxp440.conf.  See the sound/pcmcia/vx/vxp440.c.
-
-    When the driver is compiled as a module and the hotplug firmware
-    is supported, the firmware data is loaded via hotplug automatically.
-    Install the necessary firmware files in alsa-firmware package.
-    When no hotplug fw loader is available, you need to load the
-    firmware via vxloader utility in alsa-tools package.
-
-    About capture IBL, see the description of snd-vx222 module.
-
-    Note: the driver is build only when CONFIG_ISA is set.
-    
   Module snd-ymfpci
   -----------------
 

Documentation/stable_api_nonsense.txt

@@ -132,7 +132,7 @@ to extra work for the USB developers.  Since all Linux USB developers do
 their work on their own time, asking programmers to do extra work for no
 gain, for free, is not a possibility.
 
-Security issues are also a very important for Linux.  When a
+Security issues are also very important for Linux.  When a
 security issue is found, it is fixed in a very short amount of time.  A
 number of times this has caused internal kernel interfaces to be
 reworked to prevent the security problem from occurring.  When this

Documentation/stable_kernel_rules.txt

@@ -0,0 +1,58 @@
+Everything you ever wanted to know about Linux 2.6 -stable releases.
+
+Rules on what kind of patches are accepted, and what ones are not, into
+the "-stable" tree:
+
+ - It must be obviously correct and tested.
+ - It can not bigger than 100 lines, with context.
+ - It must fix only one thing.
+ - It must fix a real bug that bothers people (not a, "This could be a
+   problem..." type thing.)
+ - It must fix a problem that causes a build error (but not for things
+   marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
+   security issue, or some "oh, that's not good" issue.  In short,
+   something critical.
+ - No "theoretical race condition" issues, unless an explanation of how
+   the race can be exploited.
+ - It can not contain any "trivial" fixes in it (spelling changes,
+   whitespace cleanups, etc.)
+ - It must be accepted by the relevant subsystem maintainer.
+ - It must follow Documentation/SubmittingPatches rules.
+
+
+Procedure for submitting patches to the -stable tree:
+
+ - Send the patch, after verifying that it follows the above rules, to
+   stable@kernel.org.
+ - The sender will receive an ack when the patch has been accepted into
+   the queue, or a nak if the patch is rejected.  This response might
+   take a few days, according to the developer's schedules.
+ - If accepted, the patch will be added to the -stable queue, for review
+   by other developers.
+ - Security patches should not be sent to this alias, but instead to the
+   documented security@kernel.org.
+
+
+Review cycle:
+
+ - When the -stable maintainers decide for a review cycle, the patches
+   will be sent to the review committee, and the maintainer of the
+   affected area of the patch (unless the submitter is the maintainer of
+   the area) and CC: to the linux-kernel mailing list.
+ - The review committee has 48 hours in which to ack or nak the patch.
+ - If the patch is rejected by a member of the committee, or linux-kernel
+   members object to the patch, bringing up issues that the maintainers
+   and members did not realize, the patch will be dropped from the
+   queue.
+ - At the end of the review cycle, the acked patches will be added to
+   the latest -stable release, and a new -stable release will happen.
+ - Security patches will be accepted into the -stable tree directly from
+   the security kernel team, and not go through the normal review cycle.
+   Contact the kernel security team for more details on this procedure.
+
+
+Review committe:
+
+ - This will be made up of a number of kernel developers who have
+   volunteered for this task, and a few that haven't.
+

Documentation/x86_64/boot-options.txt

@@ -47,7 +47,7 @@ Timing
   notsc
   Don't use the CPU time stamp counter to read the wall time.
   This can be used to work around timing problems on multiprocessor systems
-  with not properly synchronized CPUs. Only useful with a SMP kernel
+  with not properly synchronized CPUs.
 
   report_lost_ticks
   Report when timer interrupts are lost because some code turned off
@@ -74,6 +74,9 @@ Idle loop
   event. This will make the CPUs eat a lot more power, but may be useful
   to get slightly better performance in multiprocessor benchmarks. It also
   makes some profiling using performance counters more accurate.
+  Please note that on systems with MONITOR/MWAIT support (like Intel EM64T
+  CPUs) this option has no performance advantage over the normal idle loop.
+  It may also interact badly with hyperthreading.
 
 Rebooting
 
@@ -178,6 +181,5 @@ Debugging
 Misc
 
   noreplacement  Don't replace instructions with more appropiate ones
-  				 for the CPU. This may be useful on asymmetric MP systems
-				 where some CPU have less capabilities than the others.
-
+		 for the CPU. This may be useful on asymmetric MP systems
+		 where some CPU have less capabilities than the others.

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 13
-EXTRAVERSION =-rc3
+EXTRAVERSION =-rc4
 NAME=Woozy Numbat
 
 # *DOCUMENTATION*

arch/arm/kernel/smp.c

@@ -176,6 +176,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	cpu_set(cpu, mm->cpu_vm_mask);
 	cpu_switch_mm(mm->pgd, mm);
 	enter_lazy_tlb(mm, current);
+	local_flush_tlb_all();
 
 	cpu_init();
 

arch/arm/lib/bitops.h

@@ -7,7 +7,7 @@
 1:	ldrexb	r2, [r1]
 	\instr	r2, r2, r3
 	strexb	r0, r2, [r1]
-	cmpne	r0, #0
+	cmp	r0, #0
 	bne	1b
 	mov	pc, lr
 	.endm

arch/arm/mach-integrator/platsmp.c

@@ -15,6 +15,7 @@
 #include <linux/mm.h>
 
 #include <asm/atomic.h>
+#include <asm/cacheflush.h>
 #include <asm/delay.h>
 #include <asm/mmu_context.h>
 #include <asm/procinfo.h>
@@ -80,6 +81,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 * "cpu" is Linux's internal ID.
 	 */
 	pen_release = cpu;
+	flush_cache_all();
 
 	/*
 	 * XXX

arch/i386/kernel/cpu/cpufreq/powernow-k8.c

@@ -1,5 +1,5 @@
 /*
- *   (c) 2003, 2004 Advanced Micro Devices, Inc.
+ *   (c) 2003, 2004, 2005 Advanced Micro Devices, Inc.
  *  Your use of this code is subject to the terms and conditions of the
  *  GNU general public license version 2. See "COPYING" or
  *  http://www.gnu.org/licenses/gpl.html
@@ -44,7 +44,7 @@
 
 #define PFX "powernow-k8: "
 #define BFX PFX "BIOS error: "
-#define VERSION "version 1.40.2"
+#define VERSION "version 1.50.3"
 #include "powernow-k8.h"
 
 /* serialize freq changes  */
@@ -231,7 +231,7 @@ static int write_new_vid(struct powernow_k8_data *data, u32 vid)
 /*
  * Reduce the vid by the max of step or reqvid.
  * Decreasing vid codes represent increasing voltages:
- * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of 0x1f is off.
+ * vid of 0 is 1.550V, vid of 0x1e is 0.800V, vid of VID_OFF is off.
  */
 static int decrease_vid_code_by_step(struct powernow_k8_data *data, u32 reqvid, u32 step)
 {
@@ -466,7 +466,7 @@ static int check_supported_cpu(unsigned int cpu)
 	eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
 	if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
 	    ((eax & CPUID_XFAM) != CPUID_XFAM_K8) ||
-	    ((eax & CPUID_XMOD) > CPUID_XMOD_REV_E)) {
+	    ((eax & CPUID_XMOD) > CPUID_XMOD_REV_F)) {
 		printk(KERN_INFO PFX "Processor cpuid %x not supported\n", eax);
 		goto out;
 	}
@@ -695,6 +695,7 @@ static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data, unsigned
 
 	data->irt = (data->acpi_data.states[index].control >> IRT_SHIFT) & IRT_MASK;
 	data->rvo = (data->acpi_data.states[index].control >> RVO_SHIFT) & RVO_MASK;
+	data->exttype = (data->acpi_data.states[index].control >> EXT_TYPE_SHIFT) & EXT_TYPE_MASK;
 	data->plllock = (data->acpi_data.states[index].control >> PLL_L_SHIFT) & PLL_L_MASK;
 	data->vidmvs = 1 << ((data->acpi_data.states[index].control >> MVS_SHIFT) & MVS_MASK);
 	data->vstable = (data->acpi_data.states[index].control >> VST_SHIFT) & VST_MASK;
@@ -734,8 +735,16 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 	}
 
 	for (i = 0; i < data->acpi_data.state_count; i++) {
-		u32 fid = data->acpi_data.states[i].control & FID_MASK;
-		u32 vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
+		u32 fid;
+		u32 vid;
+
+		if (data->exttype) {
+			fid = data->acpi_data.states[i].status & FID_MASK;
+			vid = (data->acpi_data.states[i].status >> VID_SHIFT) & VID_MASK;
+		} else {
+			fid = data->acpi_data.states[i].control & FID_MASK;
+			vid = (data->acpi_data.states[i].control >> VID_SHIFT) & VID_MASK;
+		}
 
 		dprintk("   %d : fid 0x%x, vid 0x%x\n", i, fid, vid);
 
@@ -752,7 +761,7 @@ static int powernow_k8_cpu_init_acpi(struct powernow_k8_data *data)
 		}
 
 		/* verify voltage is OK - BIOSs are using "off" to indicate invalid */
-		if (vid == 0x1f) {
+		if (vid == VID_OFF) {
 			dprintk("invalid vid %u, ignoring\n", vid);
 			powernow_table[i].frequency = CPUFREQ_ENTRY_INVALID;
 			continue;
@@ -929,15 +938,6 @@ static int powernowk8_target(struct cpufreq_policy *pol, unsigned targfreq, unsi
 
 	down(&fidvid_sem);
 
-	for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
-		/* make sure the sibling is initialized */
-		if (!powernow_data[i]) {
-                        ret = 0;
-                        up(&fidvid_sem);
-                        goto err_out;
-                }
-	}
-
 	powernow_k8_acpi_pst_values(data, newstate);
 
 	if (transition_frequency(data, newstate)) {
@@ -977,7 +977,7 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data;
 	cpumask_t oldmask = CPU_MASK_ALL;
-	int rc;
+	int rc, i;
 
 	if (!check_supported_cpu(pol->cpu))
 		return -ENODEV;
@@ -1063,7 +1063,9 @@ static int __init powernowk8_cpu_init(struct cpufreq_policy *pol)
 	printk("cpu_init done, current fid 0x%x, vid 0x%x\n",
 	       data->currfid, data->currvid);
 
-	powernow_data[pol->cpu] = data;
+	for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
+		powernow_data[i] = data;
+	}
 
 	return 0;
 

arch/i386/kernel/cpu/cpufreq/powernow-k8.h

@@ -1,5 +1,5 @@
 /*
- *  (c) 2003, 2004 Advanced Micro Devices, Inc.
+ *  (c) 2003, 2004, 2005 Advanced Micro Devices, Inc.
  *  Your use of this code is subject to the terms and conditions of the
  *  GNU general public license version 2. See "COPYING" or
  *  http://www.gnu.org/licenses/gpl.html
@@ -19,6 +19,7 @@ struct powernow_k8_data {
 	u32 vidmvs;  /* usable value calculated from mvs */
 	u32 vstable; /* voltage stabilization time, units 20 us */
 	u32 plllock; /* pll lock time, units 1 us */
+        u32 exttype; /* extended interface = 1 */
 
 	/* keep track of the current fid / vid */
 	u32 currvid, currfid;
@@ -41,7 +42,7 @@ struct powernow_k8_data {
 #define CPUID_XFAM			0x0ff00000	/* extended family */
 #define CPUID_XFAM_K8			0
 #define CPUID_XMOD			0x000f0000	/* extended model */
-#define CPUID_XMOD_REV_E		0x00020000
+#define CPUID_XMOD_REV_F		0x00040000
 #define CPUID_USE_XFAM_XMOD		0x00000f00
 #define CPUID_GET_MAX_CAPABILITIES	0x80000000
 #define CPUID_FREQ_VOLT_CAPABILITIES	0x80000007
@@ -57,25 +58,26 @@ struct powernow_k8_data {
 
 /* Field definitions within the FID VID Low Control MSR : */
 #define MSR_C_LO_INIT_FID_VID     0x00010000
-#define MSR_C_LO_NEW_VID          0x00001f00
-#define MSR_C_LO_NEW_FID          0x0000002f
+#define MSR_C_LO_NEW_VID          0x00003f00
+#define MSR_C_LO_NEW_FID          0x0000003f
 #define MSR_C_LO_VID_SHIFT        8
 
 /* Field definitions within the FID VID High Control MSR : */
-#define MSR_C_HI_STP_GNT_TO       0x000fffff
+#define MSR_C_HI_STP_GNT_TO 	  0x000fffff
 
 /* Field definitions within the FID VID Low Status MSR : */
-#define MSR_S_LO_CHANGE_PENDING   0x80000000	/* cleared when completed */
-#define MSR_S_LO_MAX_RAMP_VID     0x1f000000
+#define MSR_S_LO_CHANGE_PENDING   0x80000000   /* cleared when completed */
+#define MSR_S_LO_MAX_RAMP_VID     0x3f000000
 #define MSR_S_LO_MAX_FID          0x003f0000
 #define MSR_S_LO_START_FID        0x00003f00
 #define MSR_S_LO_CURRENT_FID      0x0000003f
 
 /* Field definitions within the FID VID High Status MSR : */
-#define MSR_S_HI_MAX_WORKING_VID  0x001f0000
-#define MSR_S_HI_START_VID        0x00001f00
-#define MSR_S_HI_CURRENT_VID      0x0000001f
-#define MSR_C_HI_STP_GNT_BENIGN   0x00000001
+#define MSR_S_HI_MIN_WORKING_VID  0x3f000000
+#define MSR_S_HI_MAX_WORKING_VID  0x003f0000
+#define MSR_S_HI_START_VID        0x00003f00
+#define MSR_S_HI_CURRENT_VID      0x0000003f
+#define MSR_C_HI_STP_GNT_BENIGN	  0x00000001
 
 /*
  * There are restrictions frequencies have to follow:
@@ -99,13 +101,15 @@ struct powernow_k8_data {
 #define MIN_FREQ_RESOLUTION  200 /* fids jump by 2 matching freq jumps by 200 */
 
 #define MAX_FID 0x2a	/* Spec only gives FID values as far as 5 GHz */
-#define LEAST_VID 0x1e	/* Lowest (numerically highest) useful vid value */
+#define LEAST_VID 0x3e	/* Lowest (numerically highest) useful vid value */
 
 #define MIN_FREQ 800	/* Min and max freqs, per spec */
 #define MAX_FREQ 5000
 
 #define INVALID_FID_MASK 0xffffffc1  /* not a valid fid if these bits are set */
-#define INVALID_VID_MASK 0xffffffe0  /* not a valid vid if these bits are set */
+#define INVALID_VID_MASK 0xffffffc0  /* not a valid vid if these bits are set */
+
+#define VID_OFF 0x3f
 
 #define STOP_GRANT_5NS 1 /* min poss memory access latency for voltage change */
 
@@ -121,12 +125,14 @@ struct powernow_k8_data {
                                                                                                     
 #define IRT_SHIFT      30
 #define RVO_SHIFT      28
+#define EXT_TYPE_SHIFT 27
 #define PLL_L_SHIFT    20
 #define MVS_SHIFT      18
 #define VST_SHIFT      11
 #define VID_SHIFT       6
 #define IRT_MASK        3
 #define RVO_MASK        3
+#define EXT_TYPE_MASK   1
 #define PLL_L_MASK   0x7f
 #define MVS_MASK        3
 #define VST_MASK     0x7f

arch/i386/kernel/cpu/intel_cacheinfo.c

@@ -128,7 +128,7 @@ static int __devinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_le
 	cpuid_count(4, index, &eax, &ebx, &ecx, &edx);
 	cache_eax.full = eax;
 	if (cache_eax.split.type == CACHE_TYPE_NULL)
-		return -1;
+		return -EIO; /* better error ? */
 
 	this_leaf->eax.full = eax;
 	this_leaf->ebx.full = ebx;
@@ -334,6 +334,7 @@ static int __devinit detect_cache_attributes(unsigned int cpu)
 	struct _cpuid4_info	*this_leaf;
 	unsigned long 		j;
 	int 			retval;
+	cpumask_t		oldmask;
 
 	if (num_cache_leaves == 0)
 		return -ENOENT;
@@ -345,19 +346,26 @@ static int __devinit detect_cache_attributes(unsigned int cpu)
 	memset(cpuid4_info[cpu], 0,
 	    sizeof(struct _cpuid4_info) * num_cache_leaves);
 
+	oldmask = current->cpus_allowed;
+	retval = set_cpus_allowed(current, cpumask_of_cpu(cpu));
+	if (retval)
+		goto out;
+
 	/* Do cpuid and store the results */
+	retval = 0;
 	for (j = 0; j < num_cache_leaves; j++) {
 		this_leaf = CPUID4_INFO_IDX(cpu, j);
 		retval = cpuid4_cache_lookup(j, this_leaf);
 		if (unlikely(retval < 0))
-			goto err_out;
+			break;
 		cache_shared_cpu_map_setup(cpu, j);
 	}
-	return 0;
+	set_cpus_allowed(current, oldmask);
 
-err_out:
-	free_cache_attributes(cpu);
-	return -ENOMEM;
+out:
+	if (retval)
+		free_cache_attributes(cpu);
+	return retval;
 }
 
 #ifdef CONFIG_SYSFS

arch/i386/kernel/machine_kexec.c

@@ -16,6 +16,7 @@
 #include <asm/io.h>
 #include <asm/apic.h>
 #include <asm/cpufeature.h>
+#include <asm/desc.h>
 
 static inline unsigned long read_cr3(void)
 {
@@ -90,33 +91,32 @@ static void identity_map_page(unsigned long address)
 }
 #endif
 
-
 static void set_idt(void *newidt, __u16 limit)
 {
-	unsigned char curidt[6];
+	struct Xgt_desc_struct curidt;
 
 	/* ia32 supports unaliged loads & stores */
-	(*(__u16 *)(curidt)) = limit;
-	(*(__u32 *)(curidt +2)) = (unsigned long)(newidt);
+	curidt.size    = limit;
+	curidt.address = (unsigned long)newidt;
 
 	__asm__ __volatile__ (
-		"lidt %0\n"
-		: "=m" (curidt)
+		"lidtl %0\n"
+		: : "m" (curidt)
 		);
 };
 
 
 static void set_gdt(void *newgdt, __u16 limit)
 {
-	unsigned char curgdt[6];
+	struct Xgt_desc_struct curgdt;
 
 	/* ia32 supports unaligned loads & stores */
-	(*(__u16 *)(curgdt)) = limit;
-	(*(__u32 *)(curgdt +2)) = (unsigned long)(newgdt);
+	curgdt.size    = limit;
+	curgdt.address = (unsigned long)newgdt;
 
 	__asm__ __volatile__ (
-		"lgdt %0\n"
-		: "=m" (curgdt)
+		"lgdtl %0\n"
+		: : "m" (curgdt)
 		);
 };
 

arch/i386/kernel/mpparse.c

@@ -1116,7 +1116,15 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
 		 */
 		int irq = gsi;
 		if (gsi < MAX_GSI_NUM) {
-			gsi = pci_irq++;
+			if (gsi > 15)
+				gsi = pci_irq++;
+#ifdef CONFIG_ACPI_BUS
+			/*
+			 * Don't assign IRQ used by ACPI SCI
+			 */
+			if (gsi == acpi_fadt.sci_int)
+				gsi = pci_irq++;
+#endif
 			gsi_to_irq[irq] = gsi;
 		} else {
 			printk(KERN_ERR "GSI %u is too high\n", gsi);

arch/i386/kernel/numaq.c

@@ -31,6 +31,7 @@
 #include <linux/nodemask.h>
 #include <asm/numaq.h>
 #include <asm/topology.h>
+#include <asm/processor.h>
 
 #define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
 
@@ -77,3 +78,11 @@ int __init get_memcfg_numaq(void)
 	smp_dump_qct();
 	return 1;
 }
+
+static int __init numaq_dsc_disable(void)
+{
+	printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
+	tsc_disable = 1;
+	return 0;
+}
+core_initcall(numaq_dsc_disable);

arch/i386/mm/discontig.c

@@ -243,6 +243,14 @@ static unsigned long calculate_numa_remap_pages(void)
 		/* now the roundup is correct, convert to PAGE_SIZE pages */
 		size = size * PTRS_PER_PTE;
 
+		if (node_end_pfn[nid] & (PTRS_PER_PTE-1)) {
+			/*
+			 * Adjust size if node_end_pfn is not on a proper
+			 * pmd boundary. remap_numa_kva will barf otherwise.
+			 */
+			size +=  node_end_pfn[nid] & (PTRS_PER_PTE-1);
+		}
+
 		/*
 		 * Validate the region we are allocating only contains valid
 		 * pages.

arch/i386/pci/irq.c

@@ -551,6 +551,13 @@ static __init int intel_router_probe(struct irq_router *r, struct pci_dev *route
 static __init int via_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
 {
 	/* FIXME: We should move some of the quirk fixup stuff here */
+
+	if (router->device == PCI_DEVICE_ID_VIA_82C686 &&
+			device == PCI_DEVICE_ID_VIA_82C586_0) {
+		/* Asus k7m bios wrongly reports 82C686A as 586-compatible */
+		device = PCI_DEVICE_ID_VIA_82C686;
+	}
+
 	switch(device)
 	{
 		case PCI_DEVICE_ID_VIA_82C586_0:

arch/s390/appldata/appldata_base.c

@@ -232,7 +232,11 @@ static int appldata_diag(char record_nr, u16 function, unsigned long buffer,
 	ry = -1;
 	asm volatile(
 			"diag %1,%0,0xDC\n\t"
-			: "=d" (ry) : "d" (&(appldata_parameter_list)) : "cc");
+			: "=d" (ry)
+			: "d" (&appldata_parameter_list),
+			  "m" (appldata_parameter_list),
+			  "m" (appldata_product_id)
+			: "cc");
 	return (int) ry;
 }
 /************************ timer, work, DIAG <END> ****************************/

arch/s390/defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc3
-# Fri Apr 22 15:30:58 2005
+# Linux kernel version: 2.6.13-rc4
+# Fri Jul 29 14:49:30 2005
 #
 CONFIG_MMU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -23,10 +23,11 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 CONFIG_IKCONFIG=y
@@ -36,6 +37,8 @@ CONFIG_IKCONFIG_PROC=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -51,9 +54,10 @@ CONFIG_BASE_SMALL=0
 # Loadable module support
 #
 CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
+CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
 CONFIG_STOP_MACHINE=y
@@ -81,8 +85,15 @@ CONFIG_MARCH_G5=y
 # CONFIG_MARCH_Z990 is not set
 CONFIG_PACK_STACK=y
 # CONFIG_SMALL_STACK is not set
-# CONFIG_CHECK_STACK is not set
+CONFIG_CHECK_STACK=y
+CONFIG_STACK_GUARD=256
 # CONFIG_WARN_STACK is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
 
 #
 # I/O subsystem configuration
@@ -95,7 +106,7 @@ CONFIG_QDIO=y
 #
 # Misc
 #
-# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT=y
 CONFIG_IPL=y
 # CONFIG_IPL_TAPE is not set
 CONFIG_IPL_VM=y
@@ -105,9 +116,110 @@ CONFIG_BINFMT_MISC=m
 CONFIG_PFAULT=y
 # CONFIG_SHARED_KERNEL is not set
 # CONFIG_CMM is not set
-# CONFIG_VIRT_TIMER is not set
+CONFIG_VIRT_TIMER=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
+# CONFIG_APPLDATA_BASE is not set
 CONFIG_NO_IDLE_HZ=y
 CONFIG_NO_IDLE_HZ_INIT=y
+# CONFIG_KEXEC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+CONFIG_IP_TCPDIAG_IPV6=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CLK_JIFFIES=y
+# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
+# CONFIG_NET_SCH_CLK_CPU is not set
+CONFIG_NET_SCH_CBQ=m
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+# CONFIG_NET_SCH_NETEM is not set
+# CONFIG_NET_SCH_INGRESS is not set
+CONFIG_NET_QOS=y
+CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+# CONFIG_CLS_U32_PERF is not set
+# CONFIG_NET_CLS_IND is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_POLICE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
 # CONFIG_PCMCIA is not set
 
 #
@@ -133,6 +245,7 @@ CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -205,7 +318,13 @@ CONFIG_MD_RAID5=m
 # CONFIG_MD_RAID6 is not set
 CONFIG_MD_MULTIPATH=m
 # CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+CONFIG_DM_MULTIPATH=y
+# CONFIG_DM_MULTIPATH_EMC is not set
 
 #
 # Character device drivers
@@ -231,7 +350,8 @@ CONFIG_CCW_CONSOLE=y
 CONFIG_SCLP=y
 CONFIG_SCLP_TTY=y
 CONFIG_SCLP_CONSOLE=y
-# CONFIG_SCLP_VT220_TTY is not set
+CONFIG_SCLP_VT220_TTY=y
+CONFIG_SCLP_VT220_CONSOLE=y
 CONFIG_SCLP_CPI=m
 CONFIG_S390_TAPE=m
 
@@ -255,105 +375,8 @@ CONFIG_S390_TAPE_34XX=m
 CONFIG_Z90CRYPT=m
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-CONFIG_NET_SCH_CBQ=m
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_HFSC is not set
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_INGRESS is not set
-CONFIG_NET_QOS=y
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
@@ -411,12 +434,15 @@ CONFIG_CCWGROUP=y
 # CONFIG_SLIP is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -426,6 +452,7 @@ CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 
 #
 # XFS support
@@ -433,6 +460,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -457,7 +485,6 @@ CONFIG_DNOTIFY=y
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_XATTR is not set
@@ -486,15 +513,18 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -544,11 +574,12 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 
 #
 # Security options

arch/s390/kernel/head.S

@@ -346,6 +346,13 @@ iplstart:
         la    %r2,.Lreset              
         lhi   %r3,26
 	diag  %r2,%r3,8
+	la    %r5,.Lirb
+	stsch 0(%r5)			       # check if irq is pending
+	tm    30(%r5),0x0f		       # by verifying if any of the
+	bnz   .Lwaitforirq		       # activity or status control
+	tm    31(%r5),0xff		       # bits is set in the schib
+	bz    .Lnoreset
+.Lwaitforirq:
 	mvc   0x78(8),.Lrdrnewpsw              # set up IO interrupt psw
 .Lwaitrdrirq:
 	lpsw  .Lrdrwaitpsw

arch/s390/kernel/head64.S

@@ -345,6 +345,13 @@ iplstart:
         la    %r2,.Lreset              
         lhi   %r3,26
 	diag  %r2,%r3,8
+	la    %r5,.Lirb
+	stsch 0(%r5)			       # check if irq is pending
+	tm    30(%r5),0x0f		       # by verifying if any of the
+	bnz   .Lwaitforirq		       # activity or status control
+	tm    31(%r5),0xff		       # bits is set in the schib
+	bz    .Lnoreset
+.Lwaitforirq:
 	mvc   0x78(8),.Lrdrnewpsw	       # set up IO interrupt psw
 .Lwaitrdrirq:
 	lpsw  .Lrdrwaitpsw

arch/um/drivers/Makefile

@@ -19,6 +19,8 @@ harddog-objs := harddog_kern.o harddog_user.o
 
 LDFLAGS_pcap.o := -r $(shell $(CC) $(CFLAGS) -print-file-name=libpcap.a)
 
+targets := pcap_kern.o pcap_user.o
+
 $(obj)/pcap.o: $(obj)/pcap_kern.o $(obj)/pcap_user.o
 	$(LD) -r -dp -o $@ $^ $(LDFLAGS) $(LDFLAGS_pcap.o)
 #XXX: The call below does not work because the flags are added before the
@@ -26,7 +28,7 @@ $(obj)/pcap.o: $(obj)/pcap_kern.o $(obj)/pcap_user.o
 #$(call if_changed,ld)
 
 # When the above is fixed, don't forget to add this too!
-#targets := $(obj)/pcap.o
+#targets += $(obj)/pcap.o
 
 obj-y := stdio_console.o fd.o chan_kern.o chan_user.o line.o
 obj-$(CONFIG_SSL) += ssl.o

arch/um/drivers/mconsole_kern.c

@@ -557,7 +557,7 @@ static int create_proc_mconsole(void)
 
 	ent = create_proc_entry("mconsole", S_IFREG | 0200, NULL);
 	if(ent == NULL){
-		printk("create_proc_mconsole : create_proc_entry failed\n");
+		printk(KERN_INFO "create_proc_mconsole : create_proc_entry failed\n");
 		return(0);
 	}
 

arch/um/kernel/exitcode.c

@@ -48,7 +48,7 @@ static int make_proc_exitcode(void)
 
 	ent = create_proc_entry("exitcode", 0600, &proc_root);
 	if(ent == NULL){
-		printk("make_proc_exitcode : Failed to register "
+		printk(KERN_WARNING "make_proc_exitcode : Failed to register "
 		       "/proc/exitcode\n");
 		return(0);
 	}

arch/um/kernel/process.c

@@ -131,7 +131,7 @@ int start_fork_tramp(void *thread_arg, unsigned long temp_stack,
 	return(arg.pid);
 }
 
-static int ptrace_child(void)
+static int ptrace_child(void *arg)
 {
 	int ret;
 	int pid = os_getpid(), ppid = getppid();
@@ -160,16 +160,20 @@ static int ptrace_child(void)
 	_exit(ret);
 }
 
-static int start_ptraced_child(void)
+static int start_ptraced_child(void **stack_out)
 {
+	void *stack;
+	unsigned long sp;
 	int pid, n, status;
 	
-	pid = fork();
-	if(pid == 0)
-		ptrace_child();
-
+	stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC,
+		     MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+	if(stack == MAP_FAILED)
+		panic("check_ptrace : mmap failed, errno = %d", errno);
+	sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *);
+	pid = clone(ptrace_child, (void *) sp, SIGCHLD, NULL);
 	if(pid < 0)
-		panic("check_ptrace : fork failed, errno = %d", errno);
+		panic("check_ptrace : clone failed, errno = %d", errno);
 	CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
 	if(n < 0)
 		panic("check_ptrace : wait failed, errno = %d", errno);
@@ -177,6 +181,7 @@ static int start_ptraced_child(void)
 		panic("check_ptrace : expected SIGSTOP, got status = %d",
 		      status);
 
+	*stack_out = stack;
 	return(pid);
 }
 
@@ -184,12 +189,12 @@ static int start_ptraced_child(void)
  * just avoid using sysemu, not panic, but only if SYSEMU features are broken.
  * So only for SYSEMU features we test mustpanic, while normal host features
  * must work anyway!*/
-static int stop_ptraced_child(int pid, int exitcode, int mustexit)
+static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic)
 {
 	int status, n, ret = 0;
 
 	if(ptrace(PTRACE_CONT, pid, 0, 0) < 0)
-		panic("stop_ptraced_child : ptrace failed, errno = %d", errno);
+		panic("check_ptrace : ptrace failed, errno = %d", errno);
 	CATCH_EINTR(n = waitpid(pid, &status, 0));
 	if(!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) {
 		int exit_with = WEXITSTATUS(status);
@@ -200,13 +205,15 @@ static int stop_ptraced_child(int pid, int exitcode, int mustexit)
 		printk("check_ptrace : child exited with exitcode %d, while "
 		      "expecting %d; status 0x%x", exit_with,
 		      exitcode, status);
-		if (mustexit)
+		if (mustpanic)
 			panic("\n");
 		else
 			printk("\n");
 		ret = -1;
 	}
 
+	if(munmap(stack, PAGE_SIZE) < 0)
+		panic("check_ptrace : munmap failed, errno = %d", errno);
 	return ret;
 }
 
@@ -242,11 +249,12 @@ __uml_setup("nosysemu", nosysemu_cmd_param,
 
 static void __init check_sysemu(void)
 {
+	void *stack;
 	int pid, syscall, n, status, count=0;
 
 	printk("Checking syscall emulation patch for ptrace...");
 	sysemu_supported = 0;
-	pid = start_ptraced_child();
+	pid = start_ptraced_child(&stack);
 
 	if(ptrace(PTRACE_SYSEMU, pid, 0, 0) < 0)
 		goto fail;
@@ -264,7 +272,7 @@ static void __init check_sysemu(void)
 		panic("check_sysemu : failed to modify system "
 		      "call return, errno = %d", errno);
 
-	if (stop_ptraced_child(pid, 0, 0) < 0)
+	if (stop_ptraced_child(pid, stack, 0, 0) < 0)
 		goto fail_stopped;
 
 	sysemu_supported = 1;
@@ -272,7 +280,7 @@ static void __init check_sysemu(void)
 	set_using_sysemu(!force_sysemu_disabled);
 
 	printk("Checking advanced syscall emulation patch for ptrace...");
-	pid = start_ptraced_child();
+	pid = start_ptraced_child(&stack);
 	while(1){
 		count++;
 		if(ptrace(PTRACE_SYSEMU_SINGLESTEP, pid, 0, 0) < 0)
@@ -297,7 +305,7 @@ static void __init check_sysemu(void)
 			break;
 		}
 	}
-	if (stop_ptraced_child(pid, 0, 0) < 0)
+	if (stop_ptraced_child(pid, stack, 0, 0) < 0)
 		goto fail_stopped;
 
 	sysemu_supported = 2;
@@ -308,17 +316,18 @@ static void __init check_sysemu(void)
 	return;
 
 fail:
-	stop_ptraced_child(pid, 1, 0);
+	stop_ptraced_child(pid, stack, 1, 0);
 fail_stopped:
 	printk("missing\n");
 }
 
 void __init check_ptrace(void)
 {
+	void *stack;
 	int pid, syscall, n, status;
 
 	printk("Checking that ptrace can change system call numbers...");
-	pid = start_ptraced_child();
+	pid = start_ptraced_child(&stack);
 
 	if (ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0)
 		panic("check_ptrace: PTRACE_SETOPTIONS failed, errno = %d", errno);
@@ -345,7 +354,7 @@ void __init check_ptrace(void)
 			break;
 		}
 	}
-	stop_ptraced_child(pid, 0, 1);
+	stop_ptraced_child(pid, stack, 0, 1);
 	printk("OK\n");
 	check_sysemu();
 }
@@ -380,10 +389,11 @@ extern void *__syscall_stub_start, __syscall_stub_end;
 static inline void check_skas3_ptrace_support(void)
 {
 	struct ptrace_faultinfo fi;
+	void *stack;
 	int pid, n;
 
 	printf("Checking for the skas3 patch in the host...");
-	pid = start_ptraced_child();
+	pid = start_ptraced_child(&stack);
 
 	n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi);
 	if (n < 0) {
@@ -402,7 +412,7 @@ static inline void check_skas3_ptrace_support(void)
 	}
 
 	init_registers(pid);
-	stop_ptraced_child(pid, 1, 1);
+	stop_ptraced_child(pid, stack, 1, 1);
 }
 
 int can_do_skas(void)

arch/um/kernel/process_kern.c

@@ -412,7 +412,7 @@ int __init make_proc_sysemu(void)
 
 	if (ent == NULL)
 	{
-		printk("Failed to register /proc/sysemu\n");
+		printk(KERN_WARNING "Failed to register /proc/sysemu\n");
 		return(0);
 	}
 

arch/um/kernel/skas/process.c

@@ -64,7 +64,7 @@ void wait_stub_done(int pid, int sig, char * fname)
                 (WSTOPSIG(status) == SIGVTALRM));
 
         if((n < 0) || !WIFSTOPPED(status) ||
-           (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status != SIGTRAP))){
+           (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){
                 panic("%s : failed to wait for SIGUSR1/SIGTRAP, "
                       "pid = %d, n = %d, errno = %d, status = 0x%x\n",
                       fname, pid, n, errno, status);

arch/um/kernel/skas/trap_user.c

@@ -58,7 +58,6 @@ void user_signal(int sig, union uml_pt_regs *regs, int pid)
         int segv = ((sig == SIGFPE) || (sig == SIGSEGV) || (sig == SIGBUS) ||
                     (sig == SIGILL) || (sig == SIGTRAP));
 
-	regs->skas.is_user = 1;
 	if (segv)
 		get_skas_faultinfo(pid, &regs->skas.faultinfo);
 	info = &sig_info[sig];

arch/um/kernel/time_kern.c

@@ -137,7 +137,10 @@ long um_stime(int __user *tptr)
 void timer_handler(int sig, union uml_pt_regs *regs)
 {
 	local_irq_disable();
-	update_process_times(CHOOSE_MODE(user_context(UPT_SP(regs)), (regs)->skas.is_user));
+	irq_enter();
+	update_process_times(CHOOSE_MODE(user_context(UPT_SP(regs)),
+					 (regs)->skas.is_user));
+	irq_exit();
 	local_irq_enable();
 	if(current_thread->cpu == 0)
 		timer_irq(regs);

arch/um/os-Linux/elf_aux.c

@@ -9,9 +9,10 @@
  */
 #include <elf.h>
 #include <stddef.h>
+#include <asm/elf.h>
 #include "init.h"
 #include "elf_user.h"
-#include <asm/elf.h>
+#include "mem_user.h"
 
 #if ELF_CLASS == ELFCLASS32
 typedef Elf32_auxv_t elf_auxv_t;
@@ -41,6 +42,9 @@ __init void scan_elf_aux( char **envp)
 				break;
 			case AT_SYSINFO_EHDR:
 				vsyscall_ehdr = auxv->a_un.a_val;
+				/* See if the page is under TASK_SIZE */
+				if (vsyscall_ehdr < (unsigned long) envp)
+					vsyscall_ehdr = 0;
 				break;
 			case AT_HWCAP:
 				elf_aux_hwcap = auxv->a_un.a_val;

arch/um/os-Linux/user_syms.c

@@ -83,6 +83,9 @@ EXPORT_SYMBOL_PROTO(statfs64);
 
 EXPORT_SYMBOL_PROTO(getuid);
 
+EXPORT_SYMBOL_PROTO(fsync);
+EXPORT_SYMBOL_PROTO(fdatasync);
+
 /*
  * Overrides for Emacs so that we follow Linus's tabbing style.
  * Emacs will notice this stuff at the end of the file and automatically

arch/um/sys-i386/stub_segv.c

@@ -21,10 +21,10 @@ stub_segv_handler(int sig)
 	__asm__("movl %0, %%eax ; int $0x80": : "g" (__NR_getpid));
 	__asm__("movl %%eax, %%ebx ; movl %0, %%eax ; movl %1, %%ecx ;"
 		"int $0x80": : "g" (__NR_kill), "g" (SIGUSR1));
-	/* Pop the frame pointer and return address since we need to leave
+	/* Load pointer to sigcontext into esp, since we need to leave
 	 * the stack in its original form when we do the sigreturn here, by
 	 * hand.
 	 */
-	__asm__("popl %%eax ; popl %%eax ; popl %%eax ; movl %0, %%eax ; "
-		"int $0x80" : : "g" (__NR_sigreturn));
+	__asm__("mov %0,%%esp ; movl %1, %%eax ; "
+		"int $0x80" : : "a" (sc), "g" (__NR_sigreturn));
 }

arch/x86_64/Kconfig

@@ -329,12 +329,15 @@ config HPET_EMULATE_RTC
 
 config GART_IOMMU
 	bool "IOMMU support"
+	default y
 	depends on PCI
 	help
-	  Support the K8 IOMMU. Needed to run systems with more than 4GB of memory
+	  Support the IOMMU. Needed to run systems with more than 3GB of memory
 	  properly with 32-bit PCI devices that do not support DAC (Double Address
 	  Cycle). The IOMMU can be turned off at runtime with the iommu=off parameter.
 	  Normally the kernel will take the right choice by itself.
+	  This option includes a driver for the AMD Opteron/Athlon64 IOMMU
+	  and a software emulation used on some other systems.
 	  If unsure, say Y.
 
 # need this always enabled with GART_IOMMU for the VIA workaround

arch/x86_64/Makefile

@@ -21,18 +21,6 @@
 #
 # $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $
 
-#
-# early bootup linking needs 32bit. You can either use real 32bit tools
-# here or 64bit tools in 32bit mode.
-#
-IA32_CC := $(CC) $(CPPFLAGS) -m32 -O2 -fomit-frame-pointer
-IA32_LD := $(LD) -m elf_i386
-IA32_AS := $(CC) $(AFLAGS) -m32 -Wa,--32 -traditional -c
-IA32_OBJCOPY := $(CROSS_COMPILE)objcopy
-IA32_CPP := $(CROSS_COMPILE)gcc -m32 -E
-export IA32_CC IA32_LD IA32_AS IA32_OBJCOPY IA32_CPP
-
-
 LDFLAGS		:= -m elf_x86_64
 OBJCOPYFLAGS	:= -O binary -R .note -R .comment -S
 LDFLAGS_vmlinux :=

arch/x86_64/defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Fri May 13 06:39:11 2005
+# Linux kernel version: 2.6.13-rc3
+# Fri Jul 22 16:47:31 2005
 #
 CONFIG_X86_64=y
 CONFIG_64BIT=y
@@ -84,14 +84,27 @@ CONFIG_X86_IO_APIC=y
 CONFIG_X86_LOCAL_APIC=y
 CONFIG_MTRR=y
 CONFIG_SMP=y
-# CONFIG_PREEMPT is not set
 CONFIG_SCHED_SMT=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
 CONFIG_K8_NUMA=y
 # CONFIG_NUMA_EMU is not set
-CONFIG_DISCONTIGMEM=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 CONFIG_NUMA=y
+CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_HAVE_DEC_LOCK=y
-CONFIG_NR_CPUS=8
+CONFIG_NR_CPUS=32
 CONFIG_HPET_TIMER=y
 CONFIG_X86_PM_TIMER=y
 CONFIG_HPET_EMULATE_RTC=y
@@ -99,7 +112,13 @@ CONFIG_GART_IOMMU=y
 CONFIG_SWIOTLB=y
 CONFIG_X86_MCE=y
 CONFIG_X86_MCE_INTEL=y
+CONFIG_PHYSICAL_START=0x100000
+# CONFIG_KEXEC is not set
 CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ISA_DMA_API=y
@@ -118,12 +137,11 @@ CONFIG_PM_STD_PARTITION=""
 CONFIG_ACPI=y
 CONFIG_ACPI_BOOT=y
 CONFIG_ACPI_INTERPRETER=y
-CONFIG_ACPI_SLEEP=y
-CONFIG_ACPI_SLEEP_PROC_FS=y
 CONFIG_ACPI_AC=y
 CONFIG_ACPI_BATTERY=y
 CONFIG_ACPI_BUTTON=y
 # CONFIG_ACPI_VIDEO is not set
+CONFIG_ACPI_HOTKEY=m
 CONFIG_ACPI_FAN=y
 CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_THERMAL=y
@@ -154,6 +172,7 @@ CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 
 #
 # CPUFreq processor drivers
@@ -203,6 +222,76 @@ CONFIG_COMPAT=y
 CONFIG_SYSVIPC_COMPAT=y
 CONFIG_UID16=y
 
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+CONFIG_IP_TCPDIAG_IPV6=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
 #
 # Device Drivers
 #
@@ -308,6 +397,7 @@ CONFIG_BLK_DEV_AMD74XX=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 CONFIG_BLK_DEV_PDC202XX_NEW=y
@@ -338,6 +428,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -372,7 +463,6 @@ CONFIG_AIC79XX_DEBUG_MASK=0
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
 # CONFIG_SCSI_SATA_SVW is not set
 CONFIG_SCSI_ATA_PIIX=y
 # CONFIG_SCSI_SATA_NV is not set
@@ -410,14 +500,21 @@ CONFIG_SCSI_QLA2XXX=y
 #
 # Multi-device support (RAID and LVM)
 #
-# CONFIG_MD is not set
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
 
 #
 # Fusion MPT device support
 #
-CONFIG_FUSION=y
-CONFIG_FUSION_MAX_SGE=40
-# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -430,75 +527,8 @@ CONFIG_FUSION_MAX_SGE=40
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-CONFIG_IP_TCPDIAG_IPV6=y
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -517,7 +547,9 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=y
+# CONFIG_TYPHOON is not set
 
 #
 # Tulip family network device support
@@ -532,7 +564,7 @@ CONFIG_NET_PCI=y
 CONFIG_FORCEDETH=y
 # CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
+CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -553,14 +585,15 @@ CONFIG_8139TOO=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -647,7 +680,6 @@ CONFIG_SERIO_I8042=y
 CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
@@ -716,12 +748,19 @@ CONFIG_MAX_RAW_DEVS=256
 # I2C support
 #
 # CONFIG_I2C is not set
+# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
 
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
 #
 # Misc devices
 #
@@ -808,6 +847,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -846,12 +886,15 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDDEV is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
 
 #
 # USB Imaging devices
@@ -902,10 +945,11 @@ CONFIG_USB_MON=y
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -923,6 +967,10 @@ CONFIG_USB_MON=y
 #
 # CONFIG_INFINIBAND is not set
 
+#
+# SN Devices
+#
+
 #
 # Firmware Drivers
 #
@@ -935,6 +983,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 # CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -957,6 +1006,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
@@ -986,7 +1036,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_XATTR is not set
@@ -1016,15 +1065,18 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set

arch/x86_64/ia32/Makefile

@@ -4,14 +4,14 @@
 
 obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_ioctl.o \
 	ia32_signal.o tls32.o \
-	ia32_binfmt.o fpu32.o ptrace32.o syscall32.o
+	ia32_binfmt.o fpu32.o ptrace32.o syscall32.o syscall32_syscall.o
 
 sysv-$(CONFIG_SYSVIPC) := ipc32.o
 obj-$(CONFIG_IA32_EMULATION) += $(sysv-y)
 
 obj-$(CONFIG_IA32_AOUT) += ia32_aout.o
 
-$(obj)/syscall32.o: $(src)/syscall32.c \
+$(obj)/syscall32_syscall.o: \
 	$(foreach F,sysenter syscall,$(obj)/vsyscall-$F.so)
 
 # Teach kbuild about targets

arch/x86_64/ia32/syscall32.c

@@ -14,16 +14,6 @@
 #include <asm/tlbflush.h>
 #include <asm/ia32_unistd.h>
 
-/* 32bit VDSOs mapped into user space. */ 
-asm(".section \".init.data\",\"aw\"\n"
-    "syscall32_syscall:\n"
-    ".incbin \"arch/x86_64/ia32/vsyscall-syscall.so\"\n"
-    "syscall32_syscall_end:\n"
-    "syscall32_sysenter:\n"
-    ".incbin \"arch/x86_64/ia32/vsyscall-sysenter.so\"\n"
-    "syscall32_sysenter_end:\n"
-    ".previous");
-
 extern unsigned char syscall32_syscall[], syscall32_syscall_end[];
 extern unsigned char syscall32_sysenter[], syscall32_sysenter_end[];
 extern int sysctl_vsyscall32;

arch/x86_64/ia32/syscall32_syscall.S

@@ -0,0 +1,17 @@
+/* 32bit VDSOs mapped into user space. */
+
+	.section ".init.data","aw"
+
+	.globl syscall32_syscall
+	.globl syscall32_syscall_end
+
+syscall32_syscall:
+	.incbin "arch/x86_64/ia32/vsyscall-syscall.so"
+syscall32_syscall_end:
+
+	.globl syscall32_sysenter
+	.globl syscall32_sysenter_end
+
+syscall32_sysenter:
+	.incbin "arch/x86_64/ia32/vsyscall-sysenter.so"
+syscall32_sysenter_end:

arch/x86_64/kernel/entry.S

@@ -76,7 +76,7 @@
 
 	.macro FAKE_STACK_FRAME child_rip
 	/* push in order ss, rsp, eflags, cs, rip */
-	xorq %rax, %rax
+	xorl %eax, %eax
 	pushq %rax /* ss */
 	CFI_ADJUST_CFA_OFFSET	8
 	pushq %rax /* rsp */
@@ -423,7 +423,7 @@ ENTRY(stub_rt_sigreturn)
 	testl $3,CS(%rdi)
 	je 1f
 	swapgs	
-1:	addl $1,%gs:pda_irqcount	# RED-PEN should check preempt count
+1:	incl	%gs:pda_irqcount	# RED-PEN should check preempt count
 	movq %gs:pda_irqstackptr,%rax
 	cmoveq %rax,%rsp							
 	pushq %rdi			# save old stack	
@@ -436,7 +436,7 @@ ENTRY(common_interrupt)
 ret_from_intr:		
 	popq  %rdi
 	cli	
-	subl $1,%gs:pda_irqcount
+	decl %gs:pda_irqcount
 #ifdef CONFIG_DEBUG_INFO
 	movq RBP(%rdi),%rbp
 #endif
@@ -494,7 +494,7 @@ retint_signal:
 	sti
 	SAVE_REST
 	movq $-1,ORIG_RAX(%rsp) 			
-	xorq %rsi,%rsi		# oldset
+	xorl %esi,%esi		# oldset
 	movq %rsp,%rdi		# &pt_regs
 	call do_notify_resume
 	RESTORE_REST
@@ -752,7 +752,7 @@ child_rip:
 	movq %rsi, %rdi
 	call *%rax
 	# exit
-	xorq %rdi, %rdi
+	xorl %edi, %edi
 	call do_exit
 
 /*
@@ -918,3 +918,15 @@ ENTRY(machine_check)
 ENTRY(call_debug)
        zeroentry do_call_debug
 
+ENTRY(call_softirq)
+	movq %gs:pda_irqstackptr,%rax
+	pushq %r15
+	movq %rsp,%r15
+	incl %gs:pda_irqcount
+	cmove %rax,%rsp
+	call __do_softirq
+	movq %r15,%rsp
+	decl %gs:pda_irqcount
+	popq %r15
+	ret
+

arch/x86_64/kernel/genapic.c

@@ -31,6 +31,7 @@ u8 x86_cpu_to_log_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
 
 extern struct genapic apic_cluster;
 extern struct genapic apic_flat;
+extern struct genapic apic_physflat;
 
 struct genapic *genapic = &apic_flat;
 
@@ -44,12 +45,7 @@ void __init clustered_apic_check(void)
 	u8 clusters, max_cluster;
 	u8 id;
 	u8 cluster_cnt[NUM_APIC_CLUSTERS];
-
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
-		/* AMD always uses flat mode right now */
-		genapic = &apic_flat;
-		goto print;
-	}
+	int num_cpus = 0;
 
 #if defined(CONFIG_ACPI_BUS)
 	/*
@@ -64,15 +60,34 @@ void __init clustered_apic_check(void)
 #endif
 
 	memset(cluster_cnt, 0, sizeof(cluster_cnt));
-
 	for (i = 0; i < NR_CPUS; i++) {
 		id = bios_cpu_apicid[i];
-		if (id != BAD_APICID)
-			cluster_cnt[APIC_CLUSTERID(id)]++;
+		if (id == BAD_APICID)
+			continue;
+		num_cpus++;
+		cluster_cnt[APIC_CLUSTERID(id)]++;
 	}
 
+	/* Don't use clustered mode on AMD platforms. */
+ 	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
+		genapic = &apic_physflat;
+#ifndef CONFIG_CPU_HOTPLUG
+		/* In the CPU hotplug case we cannot use broadcast mode
+		   because that opens a race when a CPU is removed.
+		   Stay at physflat mode in this case.
+		   It is bad to do this unconditionally though. Once
+		   we have ACPI platform support for CPU hotplug
+		   we should detect hotplug capablity from ACPI tables and
+		   only do this when really needed. -AK */
+		if (num_cpus <= 8)
+			genapic = &apic_flat;
+#endif
+ 		goto print;
+ 	}
+
 	clusters = 0;
 	max_cluster = 0;
+
 	for (i = 0; i < NUM_APIC_CLUSTERS; i++) {
 		if (cluster_cnt[i] > 0) {
 			++clusters;

arch/x86_64/kernel/genapic_flat.c

@@ -2,13 +2,11 @@
  * Copyright 2004 James Cleverdon, IBM.
  * Subject to the GNU Public License, v.2
  *
- * Flat APIC subarch code.  Maximum 8 CPUs, logical delivery.
+ * Flat APIC subarch code.
  *
  * Hacked for x86-64 by James Cleverdon from i386 architecture code by
  * Martin Bligh, Andi Kleen, James Bottomley, John Stultz, and
  * James Cleverdon.
- * Ashok Raj <ashok.raj@intel.com>
- * 	Removed IPI broadcast shortcut to support CPU hotplug
  */
 #include <linux/config.h>
 #include <linux/threads.h>
@@ -20,47 +18,6 @@
 #include <asm/smp.h>
 #include <asm/ipi.h>
 
-/*
- * The following permit choosing broadcast IPI shortcut v.s sending IPI only
- * to online cpus via the send_IPI_mask varient.
- * The mask version is my preferred option, since it eliminates a lot of
- * other extra code that would need to be written to cleanup intrs sent
- * to a CPU while offline.
- *
- * Sending broadcast introduces lots of trouble in CPU hotplug situations.
- * These IPI's are delivered to cpu's irrespective of their offline status
- * and could pickup stale intr data when these CPUS are turned online.
- *
- * Not using broadcast is a cleaner approach IMO, but Andi Kleen disagrees with
- * the idea of not using broadcast IPI's anymore. Hence the run time check
- * is introduced, on his request so we can choose an alternate mechanism.
- *
- * Initial wacky performance tests that collect cycle counts show
- * no increase in using mask v.s broadcast version. In fact they seem
- * identical in terms of cycle counts.
- *
- * if we need to use broadcast, we need to do the following.
- *
- * cli;
- * hold call_lock;
- * clear any pending IPI, just ack and clear all pending intr
- * set cpu_online_map;
- * release call_lock;
- * sti;
- *
- * The complicated dummy irq processing shown above is not required if
- * we didnt sent IPI's to wrong CPU's in the first place.
- *
- * - Ashok Raj <ashok.raj@intel.com>
- */
-#ifdef CONFIG_HOTPLUG_CPU
-#define DEFAULT_SEND_IPI	(1)
-#else
-#define DEFAULT_SEND_IPI	(0)
-#endif
-
-static int no_broadcast=DEFAULT_SEND_IPI;
-
 static cpumask_t flat_target_cpus(void)
 {
 	return cpu_online_map;
@@ -119,37 +76,15 @@ static void flat_send_IPI_mask(cpumask_t cpumask, int vector)
 	local_irq_restore(flags);
 }
 
-static inline void __local_flat_send_IPI_allbutself(int vector)
-{
-	if (no_broadcast) {
-		cpumask_t mask = cpu_online_map;
-		int this_cpu = get_cpu();
-
-		cpu_clear(this_cpu, mask);
-		flat_send_IPI_mask(mask, vector);
-		put_cpu();
-	}
-	else
-		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector, APIC_DEST_LOGICAL);
-}
-
-static inline void __local_flat_send_IPI_all(int vector)
-{
-	if (no_broadcast)
-		flat_send_IPI_mask(cpu_online_map, vector);
-	else
-		__send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
-}
-
 static void flat_send_IPI_allbutself(int vector)
 {
 	if (((num_online_cpus()) - 1) >= 1)
-		__local_flat_send_IPI_allbutself(vector);
+		__send_IPI_shortcut(APIC_DEST_ALLBUT, vector,APIC_DEST_LOGICAL);
 }
 
 static void flat_send_IPI_all(int vector)
 {
-	__local_flat_send_IPI_all(vector);
+	__send_IPI_shortcut(APIC_DEST_ALLINC, vector, APIC_DEST_LOGICAL);
 }
 
 static int flat_apic_id_registered(void)
@@ -170,16 +105,6 @@ static unsigned int phys_pkg_id(int index_msb)
 	return ((ebx >> 24) & 0xFF) >> index_msb;
 }
 
-static __init int no_ipi_broadcast(char *str)
-{
-	get_option(&str, &no_broadcast);
-	printk ("Using %s mode\n", no_broadcast ? "No IPI Broadcast" :
-											"IPI Broadcast");
-	return 1;
-}
-
-__setup("no_ipi_broadcast", no_ipi_broadcast);
-
 struct genapic apic_flat =  {
 	.name = "flat",
 	.int_delivery_mode = dest_LowestPrio,
@@ -195,11 +120,62 @@ struct genapic apic_flat =  {
 	.phys_pkg_id = phys_pkg_id,
 };
 
-static int __init print_ipi_mode(void)
+/*
+ * Physflat mode is used when there are more than 8 CPUs on a AMD system.
+ * We cannot use logical delivery in this case because the mask
+ * overflows, so use physical mode.
+ */
+
+static cpumask_t physflat_target_cpus(void)
+{
+	return cpumask_of_cpu(0);
+}
+
+static void physflat_send_IPI_mask(cpumask_t cpumask, int vector)
+{
+	send_IPI_mask_sequence(cpumask, vector);
+}
+
+static void physflat_send_IPI_allbutself(int vector)
+{
+	cpumask_t allbutme = cpu_online_map;
+	int me = get_cpu();
+	cpu_clear(me, allbutme);
+	physflat_send_IPI_mask(allbutme, vector);
+	put_cpu();
+}
+
+static void physflat_send_IPI_all(int vector)
 {
-	printk ("Using IPI %s mode\n", no_broadcast ? "No-Shortcut" :
-											"Shortcut");
-	return 0;
+	physflat_send_IPI_mask(cpu_online_map, vector);
 }
 
-late_initcall(print_ipi_mode);
+static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	int cpu;
+
+	/*
+	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
+	 * May as well be the first.
+	 */
+	cpu = first_cpu(cpumask);
+	if ((unsigned)cpu < NR_CPUS)
+		return x86_cpu_to_apicid[cpu];
+	else
+		return BAD_APICID;
+}
+
+struct genapic apic_physflat =  {
+	.name = "physical flat",
+	.int_delivery_mode = dest_LowestPrio,
+	.int_dest_mode = (APIC_DEST_PHYSICAL != 0),
+	.int_delivery_dest = APIC_DEST_PHYSICAL | APIC_DM_LOWEST,
+	.target_cpus = physflat_target_cpus,
+	.apic_id_registered = flat_apic_id_registered,
+	.init_apic_ldr = flat_init_apic_ldr,/*not needed, but shouldn't hurt*/
+	.send_IPI_all = physflat_send_IPI_all,
+	.send_IPI_allbutself = physflat_send_IPI_allbutself,
+	.send_IPI_mask = physflat_send_IPI_mask,
+	.cpu_mask_to_apicid = physflat_cpu_mask_to_apicid,
+	.phys_pkg_id = phys_pkg_id,
+};

arch/x86_64/kernel/head.S

@@ -137,14 +137,14 @@ startup_64:
 	wrmsr
 
 	/* Setup cr0 */
-	xorq	%rax, %rax
-	btsq	$31, %rax			/* Enable paging */
-	btsq	$0, %rax			/* Enable protected mode */
-	btsq	$1, %rax			/* Enable MP */
-	btsq	$4, %rax			/* Enable ET */
-	btsq	$5, %rax			/* Enable NE */
-	btsq	$16, %rax			/* Enable WP */
-	btsq	$18, %rax			/* Enable AM */
+#define CR0_PM				1		/* protected mode */
+#define CR0_MP				(1<<1)
+#define CR0_ET				(1<<4)
+#define CR0_NE				(1<<5)
+#define CR0_WP				(1<<16)
+#define CR0_AM				(1<<18)
+#define CR0_PAGING 			(1<<31)
+	movl $CR0_PM|CR0_MP|CR0_ET|CR0_NE|CR0_WP|CR0_AM|CR0_PAGING,%eax
 	/* Make changes effective */
 	movq	%rax, %cr0
 

arch/x86_64/kernel/irq.c

@@ -135,3 +135,22 @@ void fixup_irqs(cpumask_t map)
 	local_irq_disable();
 }
 #endif
+
+extern void call_softirq(void);
+
+asmlinkage void do_softirq(void)
+{
+ 	__u32 pending;
+ 	unsigned long flags;
+
+ 	if (in_interrupt())
+ 		return;
+
+ 	local_irq_save(flags);
+ 	pending = local_softirq_pending();
+ 	/* Switch to interrupt stack */
+ 	if (pending)
+		call_softirq();
+ 	local_irq_restore(flags);
+}
+EXPORT_SYMBOL(do_softirq);

arch/x86_64/kernel/machine_kexec.c

@@ -8,43 +8,26 @@
 
 #include <linux/mm.h>
 #include <linux/kexec.h>
-#include <linux/delay.h>
 #include <linux/string.h>
 #include <linux/reboot.h>
-#include <asm/pda.h>
 #include <asm/pgtable.h>
-#include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 #include <asm/mmu_context.h>
 #include <asm/io.h>
-#include <asm/apic.h>
-#include <asm/cpufeature.h>
-#include <asm/hw_irq.h>
-
-#define LEVEL0_SIZE (1UL << 12UL)
-#define LEVEL1_SIZE (1UL << 21UL)
-#define LEVEL2_SIZE (1UL << 30UL)
-#define LEVEL3_SIZE (1UL << 39UL)
-#define LEVEL4_SIZE (1UL << 48UL)
-
-#define L0_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define L1_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_PSE)
-#define L2_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
-#define L3_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
-
-static void init_level2_page(u64 *level2p, unsigned long addr)
+
+static void init_level2_page(pmd_t *level2p, unsigned long addr)
 {
 	unsigned long end_addr;
 
 	addr &= PAGE_MASK;
-	end_addr = addr + LEVEL2_SIZE;
+	end_addr = addr + PUD_SIZE;
 	while (addr < end_addr) {
-		*(level2p++) = addr | L1_ATTR;
-		addr += LEVEL1_SIZE;
+		set_pmd(level2p++, __pmd(addr | __PAGE_KERNEL_LARGE_EXEC));
+		addr += PMD_SIZE;
 	}
 }
 
-static int init_level3_page(struct kimage *image, u64 *level3p,
+static int init_level3_page(struct kimage *image, pud_t *level3p,
 				unsigned long addr, unsigned long last_addr)
 {
 	unsigned long end_addr;
@@ -52,32 +35,32 @@ static int init_level3_page(struct kimage *image, u64 *level3p,
 
 	result = 0;
 	addr &= PAGE_MASK;
-	end_addr = addr + LEVEL3_SIZE;
+	end_addr = addr + PGDIR_SIZE;
 	while ((addr < last_addr) && (addr < end_addr)) {
 		struct page *page;
-		u64 *level2p;
+		pmd_t *level2p;
 
 		page = kimage_alloc_control_pages(image, 0);
 		if (!page) {
 			result = -ENOMEM;
 			goto out;
 		}
-		level2p = (u64 *)page_address(page);
+		level2p = (pmd_t *)page_address(page);
 		init_level2_page(level2p, addr);
-		*(level3p++) = __pa(level2p) | L2_ATTR;
-		addr += LEVEL2_SIZE;
+		set_pud(level3p++, __pud(__pa(level2p) | _KERNPG_TABLE));
+		addr += PUD_SIZE;
 	}
 	/* clear the unused entries */
 	while (addr < end_addr) {
-		*(level3p++) = 0;
-		addr += LEVEL2_SIZE;
+		pud_clear(level3p++);
+		addr += PUD_SIZE;
 	}
 out:
 	return result;
 }
 
 
-static int init_level4_page(struct kimage *image, u64 *level4p,
+static int init_level4_page(struct kimage *image, pgd_t *level4p,
 				unsigned long addr, unsigned long last_addr)
 {
 	unsigned long end_addr;
@@ -85,28 +68,28 @@ static int init_level4_page(struct kimage *image, u64 *level4p,
 
 	result = 0;
 	addr &= PAGE_MASK;
-	end_addr = addr + LEVEL4_SIZE;
+	end_addr = addr + (PTRS_PER_PGD * PGDIR_SIZE);
 	while ((addr < last_addr) && (addr < end_addr)) {
 		struct page *page;
-		u64 *level3p;
+		pud_t *level3p;
 
 		page = kimage_alloc_control_pages(image, 0);
 		if (!page) {
 			result = -ENOMEM;
 			goto out;
 		}
-		level3p = (u64 *)page_address(page);
+		level3p = (pud_t *)page_address(page);
 		result = init_level3_page(image, level3p, addr, last_addr);
 		if (result) {
 			goto out;
 		}
-		*(level4p++) = __pa(level3p) | L3_ATTR;
-		addr += LEVEL3_SIZE;
+		set_pgd(level4p++, __pgd(__pa(level3p) | _KERNPG_TABLE));
+		addr += PGDIR_SIZE;
 	}
 	/* clear the unused entries */
 	while (addr < end_addr) {
-		*(level4p++) = 0;
-		addr += LEVEL3_SIZE;
+		pgd_clear(level4p++);
+		addr += PGDIR_SIZE;
 	}
 out:
 	return result;
@@ -115,52 +98,50 @@ out:
 
 static int init_pgtable(struct kimage *image, unsigned long start_pgtable)
 {
-	u64 *level4p;
-	level4p = (u64 *)__va(start_pgtable);
+	pgd_t *level4p;
+	level4p = (pgd_t *)__va(start_pgtable);
  	return init_level4_page(image, level4p, 0, end_pfn << PAGE_SHIFT);
 }
 
 static void set_idt(void *newidt, u16 limit)
 {
-	unsigned char curidt[10];
+	struct desc_ptr curidt;
 
 	/* x86-64 supports unaliged loads & stores */
-	(*(u16 *)(curidt)) = limit;
-	(*(u64 *)(curidt +2)) = (unsigned long)(newidt);
+	curidt.size    = limit;
+	curidt.address = (unsigned long)newidt;
 
 	__asm__ __volatile__ (
-		"lidt %0\n"
-		: "=m" (curidt)
+		"lidtq %0\n"
+		: : "m" (curidt)
 		);
 };
 
 
 static void set_gdt(void *newgdt, u16 limit)
 {
-	unsigned char curgdt[10];
+	struct desc_ptr curgdt;
 
 	/* x86-64 supports unaligned loads & stores */
-	(*(u16 *)(curgdt)) = limit;
-	(*(u64 *)(curgdt +2)) = (unsigned long)(newgdt);
+	curgdt.size    = limit;
+	curgdt.address = (unsigned long)newgdt;
 
 	__asm__ __volatile__ (
-		"lgdt %0\n"
-		: "=m" (curgdt)
+		"lgdtq %0\n"
+		: : "m" (curgdt)
 		);
 };
 
 static void load_segments(void)
 {
 	__asm__ __volatile__ (
-		"\tmovl $"STR(__KERNEL_DS)",%eax\n"
-		"\tmovl %eax,%ds\n"
-		"\tmovl %eax,%es\n"
-		"\tmovl %eax,%ss\n"
-		"\tmovl %eax,%fs\n"
-		"\tmovl %eax,%gs\n"
+		"\tmovl %0,%%ds\n"
+		"\tmovl %0,%%es\n"
+		"\tmovl %0,%%ss\n"
+		"\tmovl %0,%%fs\n"
+		"\tmovl %0,%%gs\n"
+		: : "a" (__KERNEL_DS)
 		);
-#undef STR
-#undef __STR
 }
 
 typedef NORET_TYPE void (*relocate_new_kernel_t)(unsigned long indirection_page,
@@ -178,7 +159,7 @@ int machine_kexec_prepare(struct kimage *image)
 
 	/* Calculate the offsets */
 	start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT;
-	control_code_buffer = start_pgtable + 4096UL;
+	control_code_buffer = start_pgtable + PAGE_SIZE;
 
 	/* Setup the identity mapped 64bit page table */
 	result = init_pgtable(image, start_pgtable);
@@ -214,7 +195,7 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	/* Calculate the offsets */
 	page_list = image->head;
 	start_pgtable = page_to_pfn(image->control_code_page) << PAGE_SHIFT;
-	control_code_buffer = start_pgtable + 4096UL;
+	control_code_buffer = start_pgtable + PAGE_SIZE;
 
 	/* Set the low half of the page table to my identity mapped
 	 * page table for kexec.  Leave the high half pointing at the

arch/x86_64/kernel/mce.c

@@ -15,6 +15,8 @@
 #include <linux/sysdev.h>
 #include <linux/miscdevice.h>
 #include <linux/fs.h>
+#include <linux/cpu.h>
+#include <linux/percpu.h>
 #include <asm/processor.h> 
 #include <asm/msr.h>
 #include <asm/mce.h>
@@ -514,10 +516,7 @@ static struct sysdev_class mce_sysclass = {
 	set_kset_name("machinecheck"),
 };
 
-static struct sys_device device_mce = {
-	.id	= 0,
-	.cls	= &mce_sysclass,
-};
+static DEFINE_PER_CPU(struct sys_device, device_mce);
 
 /* Why are there no generic functions for this? */
 #define ACCESSOR(name, var, start) \
@@ -542,27 +541,83 @@ ACCESSOR(bank4ctl,bank[4],mce_restart())
 ACCESSOR(tolerant,tolerant,)
 ACCESSOR(check_interval,check_interval,mce_restart())
 
-static __cpuinit int mce_init_device(void)
+/* Per cpu sysdev init.  All of the cpus still share the same ctl bank */
+static __cpuinit int mce_create_device(unsigned int cpu)
 {
 	int err;
+	if (!mce_available(&cpu_data[cpu]))
+		return -EIO;
+
+	per_cpu(device_mce,cpu).id = cpu;
+	per_cpu(device_mce,cpu).cls = &mce_sysclass;
+
+	err = sysdev_register(&per_cpu(device_mce,cpu));
+
+	if (!err) {
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank0ctl);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank1ctl);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank2ctl);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank3ctl);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_bank4ctl);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_tolerant);
+		sysdev_create_file(&per_cpu(device_mce,cpu), &attr_check_interval);
+	}
+	return err;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static __cpuinit void mce_remove_device(unsigned int cpu)
+{
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank0ctl);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank1ctl);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank2ctl);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank3ctl);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_bank4ctl);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_tolerant);
+	sysdev_remove_file(&per_cpu(device_mce,cpu), &attr_check_interval);
+	sysdev_unregister(&per_cpu(device_mce,cpu));
+}
+#endif
+
+/* Get notified when a cpu comes on/off. Be hotplug friendly. */
+static __cpuinit int
+mce_cpu_callback(struct notifier_block *nfb, unsigned long action, void *hcpu)
+{
+	unsigned int cpu = (unsigned long)hcpu;
+
+	switch (action) {
+	case CPU_ONLINE:
+		mce_create_device(cpu);
+		break;
+#ifdef CONFIG_HOTPLUG_CPU
+	case CPU_DEAD:
+		mce_remove_device(cpu);
+		break;
+#endif
+	}
+	return NOTIFY_OK;
+}
+
+static struct notifier_block mce_cpu_notifier = {
+	.notifier_call = mce_cpu_callback,
+};
+
+static __init int mce_init_device(void)
+{
+	int err;
+	int i = 0;
+
 	if (!mce_available(&boot_cpu_data))
 		return -EIO;
 	err = sysdev_class_register(&mce_sysclass);
-	if (!err)
-		err = sysdev_register(&device_mce);
-	if (!err) { 
-		/* could create per CPU objects, but it is not worth it. */
-		sysdev_create_file(&device_mce, &attr_bank0ctl); 
-		sysdev_create_file(&device_mce, &attr_bank1ctl); 
-		sysdev_create_file(&device_mce, &attr_bank2ctl); 
-		sysdev_create_file(&device_mce, &attr_bank3ctl); 
-		sysdev_create_file(&device_mce, &attr_bank4ctl); 
-		sysdev_create_file(&device_mce, &attr_tolerant); 
-		sysdev_create_file(&device_mce, &attr_check_interval);
-	} 
-	
+
+	for_each_online_cpu(i) {
+		mce_create_device(i);
+	}
+
+	register_cpu_notifier(&mce_cpu_notifier);
 	misc_register(&mce_log_device);
 	return err;
-
 }
+
 device_initcall(mce_init_device);

arch/x86_64/kernel/mpparse.c

@@ -109,7 +109,7 @@ static int __init mpf_checksum(unsigned char *mp, int len)
 
 static void __init MP_processor_info (struct mpc_config_processor *m)
 {
-	int ver;
+	int ver, cpu;
 	static int found_bsp=0;
 
 	if (!(m->mpc_cpuflag & CPU_ENABLED))
@@ -131,7 +131,7 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 		return;
 	}
 
-	num_processors++;
+	cpu = num_processors++;
 
 	if (m->mpc_apicid > MAX_APICS) {
 		printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
@@ -155,13 +155,18 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
  		 * in same order as logical cpu numbers. Hence the first
  		 * entry is BSP, and so on.
  		 */
+		cpu = 0;
+
  		bios_cpu_apicid[0] = m->mpc_apicid;
  		x86_cpu_to_apicid[0] = m->mpc_apicid;
  		found_bsp = 1;
- 	} else {
- 		bios_cpu_apicid[num_processors - found_bsp] = m->mpc_apicid;
- 		x86_cpu_to_apicid[num_processors - found_bsp] = m->mpc_apicid;
- 	}
+ 	} else
+		cpu = num_processors - found_bsp;
+	bios_cpu_apicid[cpu] = m->mpc_apicid;
+	x86_cpu_to_apicid[cpu] = m->mpc_apicid;
+
+	cpu_set(cpu, cpu_possible_map);
+	cpu_set(cpu, cpu_present_map);
 }
 
 static void __init MP_bus_info (struct mpc_config_bus *m)

arch/x86_64/kernel/setup.c

@@ -765,8 +765,6 @@ static void __init amd_detect_cmp(struct cpuinfo_x86 *c)
 	int cpu = smp_processor_id();
 	int node = 0;
 	unsigned bits;
-	if (c->x86_num_cores == 1)
-		return;
 
 	bits = 0;
 	while ((1 << bits) < c->x86_num_cores)
@@ -1081,8 +1079,7 @@ void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
 	else
 		mtrr_ap_init();
 #ifdef CONFIG_NUMA
-	if (c != &boot_cpu_data)
-		numa_add_cpu(c - cpu_data);
+	numa_add_cpu(smp_processor_id());
 #endif
 }
  

arch/x86_64/kernel/setup64.c

@@ -12,6 +12,7 @@
 #include <linux/string.h>
 #include <linux/bootmem.h>
 #include <linux/bitops.h>
+#include <linux/module.h>
 #include <asm/bootsetup.h>
 #include <asm/pda.h>
 #include <asm/pgtable.h>
@@ -22,10 +23,8 @@
 #include <asm/smp.h>
 #include <asm/i387.h>
 #include <asm/percpu.h>
-#include <asm/mtrr.h>
 #include <asm/proto.h>
-#include <asm/mman.h>
-#include <asm/numa.h>
+#include <asm/sections.h>
 
 char x86_boot_params[BOOT_PARAM_SIZE] __initdata = {0,};
 
@@ -33,11 +32,6 @@ cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
 
 struct x8664_pda cpu_pda[NR_CPUS] __cacheline_aligned; 
 
-extern struct task_struct init_task;
-
-extern unsigned char __per_cpu_start[], __per_cpu_end[]; 
-
-extern struct desc_ptr cpu_gdt_descr[];
 struct desc_ptr idt_descr = { 256 * 16, (unsigned long) idt_table }; 
 
 char boot_cpu_stack[IRQSTACKSIZE] __attribute__((section(".bss.page_aligned")));
@@ -101,7 +95,7 @@ void __init setup_per_cpu_areas(void)
 #endif
 
 	for (i = 0; i < NR_CPUS; i++) { 
-		unsigned char *ptr;
+		char *ptr;
 
 		if (!NODE_DATA(cpu_to_node(i))) {
 			printk("cpu with no node %d, num_online_nodes %d\n",
@@ -190,11 +184,7 @@ void __cpuinit check_efer(void)
  */
 void __cpuinit cpu_init (void)
 {
-#ifdef CONFIG_SMP
 	int cpu = stack_smp_processor_id();
-#else
-	int cpu = smp_processor_id();
-#endif
 	struct tss_struct *t = &per_cpu(init_tss, cpu);
 	unsigned long v; 
 	char *estacks = NULL; 
@@ -214,7 +204,7 @@ void __cpuinit cpu_init (void)
 
 	printk("Initializing CPU#%d\n", cpu);
 
-		clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
+	clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
 
 	/*
 	 * Initialize the per-CPU GDT with the boot GDT,

arch/x86_64/kernel/smp.c

@@ -129,10 +129,9 @@ asmlinkage void smp_invalidate_interrupt (void)
 		} else
 			leave_mm(cpu);
 	}
+out:
 	ack_APIC_irq();
 	cpu_clear(cpu, flush_cpumask);
-
-out:
 	put_cpu_no_resched();
 }
 
@@ -293,6 +292,69 @@ void unlock_ipi_call_lock(void)
 	spin_unlock_irq(&call_lock);
 }
 
+/*
+ * this function sends a 'generic call function' IPI to one other CPU
+ * in the system.
+ */
+static void __smp_call_function_single (int cpu, void (*func) (void *info), void *info,
+				int nonatomic, int wait)
+{
+	struct call_data_struct data;
+	int cpus = 1;
+
+	data.func = func;
+	data.info = info;
+	atomic_set(&data.started, 0);
+	data.wait = wait;
+	if (wait)
+		atomic_set(&data.finished, 0);
+
+	call_data = &data;
+	wmb();
+	/* Send a message to all other CPUs and wait for them to respond */
+	send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNCTION_VECTOR);
+
+	/* Wait for response */
+	while (atomic_read(&data.started) != cpus)
+		cpu_relax();
+
+	if (!wait)
+		return;
+
+	while (atomic_read(&data.finished) != cpus)
+		cpu_relax();
+}
+
+/*
+ * smp_call_function_single - Run a function on another CPU
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @nonatomic: Currently unused.
+ * @wait: If true, wait until function has completed on other CPUs.
+ *
+ * Retrurns 0 on success, else a negative status code.
+ *
+ * Does not return until the remote CPU is nearly ready to execute <func>
+ * or is or has executed.
+ */
+
+int smp_call_function_single (int cpu, void (*func) (void *info), void *info,
+	int nonatomic, int wait)
+{
+	/* prevent preemption and reschedule on another processor */
+	int me = get_cpu();
+	if (cpu == me) {
+		WARN_ON(1);
+		put_cpu();
+		return -EBUSY;
+	}
+	spin_lock_bh(&call_lock);
+	__smp_call_function_single(cpu, func, info, nonatomic, wait);
+	spin_unlock_bh(&call_lock);
+	put_cpu();
+	return 0;
+}
+
 /*
  * this function sends a 'generic call function' IPI to all other CPUs
  * in the system.

arch/x86_64/kernel/smpboot.c

@@ -112,24 +112,6 @@ struct task_struct *idle_thread_array[NR_CPUS] __cpuinitdata ;
 #define get_idle_for_cpu(x)     (idle_thread_array[(x)])
 #define set_idle_for_cpu(x,p)   (idle_thread_array[(x)] = (p))
 
-/*
- * cpu_possible_map should be static, it cannot change as cpu's
- * are onlined, or offlined. The reason is per-cpu data-structures
- * are allocated by some modules at init time, and dont expect to
- * do this dynamically on cpu arrival/departure.
- * cpu_present_map on the other hand can change dynamically.
- * In case when cpu_hotplug is not compiled, then we resort to current
- * behaviour, which is cpu_possible == cpu_present.
- * If cpu-hotplug is supported, then we need to preallocate for all
- * those NR_CPUS, hence cpu_possible_map represents entire NR_CPUS range.
- * - Ashok Raj
- */
-#ifdef CONFIG_HOTPLUG_CPU
-#define fixup_cpu_possible_map(x)	cpu_set((x), cpu_possible_map)
-#else
-#define fixup_cpu_possible_map(x)
-#endif
-
 /*
  * Currently trivial. Write the real->protected mode
  * bootstrap into the page concerned. The caller
@@ -229,9 +211,6 @@ static __cpuinit void sync_master(void *arg)
 {
 	unsigned long flags, i;
 
-	if (smp_processor_id() != 0)
-		return;
-
 	go[MASTER] = 0;
 
 	local_irq_save(flags);
@@ -280,7 +259,7 @@ get_delta(long *rt, long *master)
 	return tcenter - best_tm;
 }
 
-static __cpuinit void sync_tsc(void)
+static __cpuinit void sync_tsc(unsigned int master)
 {
 	int i, done = 0;
 	long delta, adj, adjust_latency = 0;
@@ -294,9 +273,17 @@ static __cpuinit void sync_tsc(void)
 	} t[NUM_ROUNDS] __cpuinitdata;
 #endif
 
+	printk(KERN_INFO "CPU %d: Syncing TSC to CPU %u.\n",
+		smp_processor_id(), master);
+
 	go[MASTER] = 1;
 
-	smp_call_function(sync_master, NULL, 1, 0);
+	/* It is dangerous to broadcast IPI as cpus are coming up,
+	 * as they may not be ready to accept them.  So since
+	 * we only need to send the ipi to the boot cpu direct
+	 * the message, and avoid the race.
+	 */
+	smp_call_function_single(master, sync_master, NULL, 1, 0);
 
 	while (go[MASTER])	/* wait for master to be ready */
 		no_cpu_relax();
@@ -340,16 +327,14 @@ static __cpuinit void sync_tsc(void)
 	printk(KERN_INFO
 	       "CPU %d: synchronized TSC with CPU %u (last diff %ld cycles, "
 	       "maxerr %lu cycles)\n",
-	       smp_processor_id(), boot_cpu_id, delta, rt);
+	       smp_processor_id(), master, delta, rt);
 }
 
 static void __cpuinit tsc_sync_wait(void)
 {
 	if (notscsync || !cpu_has_tsc)
 		return;
-	printk(KERN_INFO "CPU %d: Syncing TSC to CPU %u.\n", smp_processor_id(),
-			boot_cpu_id);
-	sync_tsc();
+	sync_tsc(boot_cpu_id);
 }
 
 static __init int notscsync_setup(char *s)
@@ -773,8 +758,9 @@ do_rest:
 	initial_code = start_secondary;
 	clear_ti_thread_flag(c_idle.idle->thread_info, TIF_FORK);
 
-	printk(KERN_INFO "Booting processor %d/%d rip %lx rsp %lx\n", cpu, apicid,
-	       start_rip, init_rsp);
+	printk(KERN_INFO "Booting processor %d/%d APIC 0x%x\n", cpu,
+		cpus_weight(cpu_present_map),
+		apicid);
 
 	/*
 	 * This grunge runs the startup process for
@@ -924,6 +910,27 @@ static __init void enforce_max_cpus(unsigned max_cpus)
 	}
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * cpu_possible_map should be static, it cannot change as cpu's
+ * are onlined, or offlined. The reason is per-cpu data-structures
+ * are allocated by some modules at init time, and dont expect to
+ * do this dynamically on cpu arrival/departure.
+ * cpu_present_map on the other hand can change dynamically.
+ * In case when cpu_hotplug is not compiled, then we resort to current
+ * behaviour, which is cpu_possible == cpu_present.
+ * If cpu-hotplug is supported, then we need to preallocate for all
+ * those NR_CPUS, hence cpu_possible_map represents entire NR_CPUS range.
+ * - Ashok Raj
+ */
+static void prefill_possible_map(void)
+{
+	int i;
+	for (i = 0; i < NR_CPUS; i++)
+		cpu_set(i, cpu_possible_map);
+}
+#endif
+
 /*
  * Various sanity checks.
  */
@@ -987,25 +994,15 @@ static int __init smp_sanity_check(unsigned max_cpus)
  */
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
 	nmi_watchdog_default();
 	current_cpu_data = boot_cpu_data;
 	current_thread_info()->cpu = 0;  /* needed? */
 
 	enforce_max_cpus(max_cpus);
 
-	/*
-	 * Fill in cpu_present_mask
-	 */
-	for (i = 0; i < NR_CPUS; i++) {
-		int apicid = cpu_present_to_apicid(i);
-		if (physid_isset(apicid, phys_cpu_present_map)) {
-			cpu_set(i, cpu_present_map);
-			cpu_set(i, cpu_possible_map);
-		}
-		fixup_cpu_possible_map(i);
-	}
+#ifdef CONFIG_HOTPLUG_CPU
+	prefill_possible_map();
+#endif
 
 	if (smp_sanity_check(max_cpus) < 0) {
 		printk(KERN_INFO "SMP disabled\n");
@@ -1189,8 +1186,7 @@ void __cpu_die(unsigned int cpu)
 			printk ("CPU %d is now offline\n", cpu);
 			return;
 		}
-		current->state = TASK_UNINTERRUPTIBLE;
-		schedule_timeout(HZ/10);
+		msleep(100);
 	}
  	printk(KERN_ERR "CPU %u didn't die...\n", cpu);
 }

arch/x86_64/kernel/traps.c

@@ -594,9 +594,6 @@ asmlinkage void default_do_nmi(struct pt_regs *regs)
 	if (!cpu)
 		reason = get_nmi_reason();
 
-	if (!cpu_online(cpu))
-		return;
-
 	if (!(reason & 0xc0)) {
 		if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 0, SIGINT)
 								== NOTIFY_STOP)

arch/x86_64/lib/delay.c

@@ -18,8 +18,6 @@
 #include <asm/smp.h>
 #endif
 
-int x86_udelay_tsc = 0;		/* Delay via TSC */
-
 int read_current_timer(unsigned long *timer_value)
 {
 	rdtscll(*timer_value);

arch/x86_64/mm/fault.c

@@ -23,7 +23,6 @@
 #include <linux/vt_kern.h>		/* For unblank_screen() */
 #include <linux/compiler.h>
 #include <linux/module.h>
-#include <linux/kprobes.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>

arch/x86_64/mm/numa.c

@@ -36,34 +36,36 @@ int numa_off __initdata;
 int __init compute_hash_shift(struct node *nodes, int numnodes)
 {
 	int i; 
-	int shift = 24;
-	u64 addr;
+	int shift = 20;
+	unsigned long addr,maxend=0;
 	
-	/* When in doubt use brute force. */
-	while (shift < 48) { 
-		memset(memnodemap,0xff,sizeof(*memnodemap) * NODEMAPSIZE); 
-		for (i = 0; i < numnodes; i++) {
-			if (nodes[i].start == nodes[i].end) 
-				continue;
-			for (addr = nodes[i].start; 
-			     addr < nodes[i].end; 
-			     addr += (1UL << shift)) {
-				if (memnodemap[addr >> shift] != 0xff && 
-				    memnodemap[addr >> shift] != i) { 
-					printk(KERN_INFO 
-					    "node %d shift %d addr %Lx conflict %d\n", 
-					       i, shift, addr, memnodemap[addr>>shift]);
-					goto next; 
-				} 
-				memnodemap[addr >> shift] = i; 
+	for (i = 0; i < numnodes; i++)
+		if ((nodes[i].start != nodes[i].end) && (nodes[i].end > maxend))
+				maxend = nodes[i].end;
+
+	while ((1UL << shift) <  (maxend / NODEMAPSIZE))
+		shift++;
+
+	printk (KERN_DEBUG"Using %d for the hash shift. Max adder is %lx \n",
+			shift,maxend);
+	memset(memnodemap,0xff,sizeof(*memnodemap) * NODEMAPSIZE);
+	for (i = 0; i < numnodes; i++) {
+		if (nodes[i].start == nodes[i].end)
+			continue;
+		for (addr = nodes[i].start;
+		     addr < nodes[i].end;
+		     addr += (1UL << shift)) {
+			if (memnodemap[addr >> shift] != 0xff) {
+				printk(KERN_INFO
+	"Your memory is not aligned you need to rebuild your kernel "
+	"with a bigger NODEMAPSIZE shift=%d adder=%lu\n",
+					shift,addr);
+				return -1;
 			} 
+			memnodemap[addr >> shift] = i;
 		} 
-		return shift; 
-	next:
-		shift++; 
 	} 
-	memset(memnodemap,0,sizeof(*memnodemap) * NODEMAPSIZE); 
-	return -1; 
+	return shift;
 }
 
 #ifdef CONFIG_SPARSEMEM

arch/x86_64/mm/srat.c

@@ -20,6 +20,9 @@
 
 static struct acpi_table_slit *acpi_slit;
 
+/* Internal processor count */
+static unsigned int __initdata num_processors = 0;
+
 static nodemask_t nodes_parsed __initdata;
 static nodemask_t nodes_found __initdata;
 static struct node nodes[MAX_NUMNODES] __initdata;
@@ -101,16 +104,18 @@ acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa)
 		bad_srat();
 		return;
 	}
-	if (pa->apic_id >= NR_CPUS) {
-		printk(KERN_ERR "SRAT: lapic %u too large.\n",
-		       pa->apic_id);
+	if (num_processors >= NR_CPUS) {
+		printk(KERN_ERR "SRAT: Processor #%d (lapic %u) INVALID. (Max ID: %d).\n",
+			num_processors, pa->apic_id, NR_CPUS);
 		bad_srat();
 		return;
 	}
-	cpu_to_node[pa->apic_id] = node;
+	cpu_to_node[num_processors] = node;
 	acpi_numa = 1;
-	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
-	       pxm, pa->apic_id, node);
+	printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> CPU %u -> Node %u\n",
+	       pxm, pa->apic_id, num_processors, node);
+
+	num_processors++;
 }
 
 /* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
@@ -124,7 +129,6 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
 
 	if (srat_disabled() || ma->flags.enabled == 0)
 		return;
-	/* hotplug bit is ignored for now */
 	pxm = ma->proximity_domain;
 	node = setup_node(pxm);
 	if (node < 0) {
@@ -134,6 +138,10 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
 	}
 	start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32);
 	end = start + (ma->length_lo | ((u64)ma->length_hi << 32));
+	/* It is fine to add this area to the nodes data it will be used later*/
+	if (ma->flags.hot_pluggable == 1)
+		printk(KERN_INFO "SRAT: hot plug zone found %lx - %lx \n",
+				start, end);
 	i = conflicting_nodes(start, end);
 	if (i >= 0) {
 		printk(KERN_ERR

arch/x86_64/pci/k8-bus.c

@@ -29,7 +29,7 @@ __init static int
 fill_mp_bus_to_cpumask(void)
 {
 	struct pci_dev *nb_dev = NULL;
-	int i, j, printed;
+	int i, j;
 	u32 ldtbus, nid;
 	static int lbnr[3] = {
 		LDT_BUS_NUMBER_REGISTER_0,

drivers/block/cciss.c

@@ -1135,7 +1135,7 @@ static int revalidate_allvol(ctlr_info_t *host)
 		/* this is for the online array utilities */
 		if (!drv->heads && i)
 			continue;
-		blk_queue_hardsect_size(host->queue, drv->block_size);
+		blk_queue_hardsect_size(drv->queue, drv->block_size);
 		set_capacity(disk, drv->nr_blocks);
 		add_disk(disk);
 	}
@@ -1691,7 +1691,7 @@ static int cciss_revalidate(struct gendisk *disk)
 	cciss_read_capacity(h->ctlr, logvol, size_buff, 1, &total_size, &block_size);
 	cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size, inq_buff, drv);
 
-	blk_queue_hardsect_size(h->queue, drv->block_size);
+	blk_queue_hardsect_size(drv->queue, drv->block_size);
 	set_capacity(disk, drv->nr_blocks);
 
 	kfree(size_buff);
@@ -2248,12 +2248,12 @@ static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs)
  	 * them up.  We will also keep track of the next queue to run so
  	 * that every queue gets a chance to be started first.
  	*/
- 	for (j=0; j < NWD; j++){
- 		int curr_queue = (start_queue + j) % NWD;
+	for (j=0; j < h->highest_lun + 1; j++){
+		int curr_queue = (start_queue + j) % (h->highest_lun + 1);
  		/* make sure the disk has been added and the drive is real
  		 * because this can be called from the middle of init_one.
  		*/
- 		if(!(h->gendisk[curr_queue]->queue) ||
+		if(!(h->drv[curr_queue].queue) ||
 		 		   !(h->drv[curr_queue].heads))
  			continue;
  		blk_start_queue(h->gendisk[curr_queue]->queue);
@@ -2264,14 +2264,14 @@ static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs)
  		if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS)
  		{
  			if (curr_queue == start_queue){
- 				h->next_to_run = (start_queue + 1) % NWD;
+				h->next_to_run = (start_queue + 1) % (h->highest_lun + 1);
  				goto cleanup;
  			} else {
  				h->next_to_run = curr_queue;
  				goto cleanup;
  	}
  		} else {
- 			curr_queue = (curr_queue + 1) % NWD;
+			curr_queue = (curr_queue + 1) % (h->highest_lun + 1);
  		}
  	}
 
@@ -2279,7 +2279,6 @@ cleanup:
 	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
 	return IRQ_HANDLED;
 }
-
 /* 
  *  We cannot read the structure directly, for portablity we must use 
  *   the io functions.
@@ -2789,13 +2788,6 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 	}
 
 	spin_lock_init(&hba[i]->lock);
-	q = blk_init_queue(do_cciss_request, &hba[i]->lock);
-	if (!q)
-		goto clean4;
-
-	q->backing_dev_info.ra_pages = READ_AHEAD;
-	hba[i]->queue = q;
-	q->queuedata = hba[i];
 
 	/* Initialize the pdev driver private data. 
 		have it point to hba[i].  */
@@ -2817,6 +2809,20 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 
 	cciss_procinit(i);
 
+	for(j=0; j < NWD; j++) { /* mfm */
+		drive_info_struct *drv = &(hba[i]->drv[j]);
+		struct gendisk *disk = hba[i]->gendisk[j];
+
+		q = blk_init_queue(do_cciss_request, &hba[i]->lock);
+		if (!q) {
+			printk(KERN_ERR
+			   "cciss:  unable to allocate queue for disk %d\n",
+			   j);
+			break;
+		}
+		drv->queue = q;
+
+		q->backing_dev_info.ra_pages = READ_AHEAD;
 	blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
 
 	/* This is a hardware imposed limit. */
@@ -2827,26 +2833,23 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
 
 	blk_queue_max_sectors(q, 512);
 
-
-	for(j=0; j<NWD; j++) {
-		drive_info_struct *drv = &(hba[i]->drv[j]);
-		struct gendisk *disk = hba[i]->gendisk[j];
-
+		q->queuedata = hba[i];
 		sprintf(disk->disk_name, "cciss/c%dd%d", i, j);
 		sprintf(disk->devfs_name, "cciss/host%d/target%d", i, j);
 		disk->major = hba[i]->major;
 		disk->first_minor = j << NWD_SHIFT;
 		disk->fops = &cciss_fops;
-		disk->queue = hba[i]->queue;
+		disk->queue = q;
 		disk->private_data = drv;
 		/* we must register the controller even if no disks exist */
 		/* this is for the online array utilities */
 		if(!drv->heads && j)
 			continue;
-		blk_queue_hardsect_size(hba[i]->queue, drv->block_size);
+		blk_queue_hardsect_size(q, drv->block_size);
 		set_capacity(disk, drv->nr_blocks);
 		add_disk(disk);
 	}
+
 	return(1);
 
 clean4:
@@ -2912,10 +2915,10 @@ static void __devexit cciss_remove_one (struct pci_dev *pdev)
 	for (j = 0; j < NWD; j++) {
 		struct gendisk *disk = hba[i]->gendisk[j];
 		if (disk->flags & GENHD_FL_UP)
+			blk_cleanup_queue(disk->queue);
 			del_gendisk(disk);
 	}
 
-	blk_cleanup_queue(hba[i]->queue);
 	pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(CommandList_struct),
 			    hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
 	pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof( ErrorInfo_struct),

drivers/block/cciss.h

@@ -29,6 +29,7 @@ typedef struct _drive_info_struct
 {
  	__u32   LunID;	
 	int 	usage_count;
+	struct request_queue *queue;
 	sector_t nr_blocks;
 	int	block_size;
 	int 	heads;
@@ -72,7 +73,6 @@ struct ctlr_info
 	unsigned int maxQsinceinit;
 	unsigned int maxSG;
 	spinlock_t lock;
-	struct request_queue *queue;
 
 	//* pointers to command and error info pool */ 
 	CommandList_struct 	*cmd_pool;
@@ -260,7 +260,7 @@ struct board_type {
 	struct access_method *access;
 };
 
-#define CCISS_LOCK(i)	(hba[i]->queue->queue_lock)
+#define CCISS_LOCK(i)	(&hba[i]->lock)
 
 #endif /* CCISS_H */
 

drivers/char/agp/agp.h

@@ -143,6 +143,7 @@ struct agp_bridge_data {
 	char major_version;
 	char minor_version;
 	struct list_head list;
+	u32 apbase_config;
 };
 
 #define KB(x)	((x) * 1024)

drivers/char/agp/intel-agp.c

@@ -1047,9 +1047,15 @@ static int intel_845_configure(void)
 	/* aperture size */
 	pci_write_config_byte(agp_bridge->dev, INTEL_APSIZE, current_size->size_value);
 
-	/* address to map to */
-	pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
-	agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
+	if (agp_bridge->apbase_config != 0) {
+		pci_write_config_dword(agp_bridge->dev, AGP_APBASE,
+				       agp_bridge->apbase_config);
+	} else {
+		/* address to map to */
+		pci_read_config_dword(agp_bridge->dev, AGP_APBASE, &temp);
+		agp_bridge->gart_bus_addr = (temp & PCI_BASE_ADDRESS_MEM_MASK);
+		agp_bridge->apbase_config = temp;
+	}
 
 	/* attbase - aperture base */
 	pci_write_config_dword(agp_bridge->dev, INTEL_ATTBASE, agp_bridge->gatt_bus_addr);

drivers/char/keyboard.c

@@ -198,10 +198,10 @@ int setkeycode(unsigned int scancode, unsigned int keycode)
 
 	if (scancode >= dev->keycodemax)
 		return -EINVAL;
-	if (keycode > KEY_MAX)
-		return -EINVAL;
 	if (keycode < 0 || keycode > KEY_MAX)
 		return -EINVAL;
+	if (keycode >> (dev->keycodesize * 8))
+		return -EINVAL;
 
 	oldkey = SET_INPUT_KEYCODE(dev, scancode, keycode);
 

drivers/char/sonypi.c

@@ -439,6 +439,11 @@ static struct {
 	{ 0, 0 },
 };
 
+struct sonypi_keypress {
+	struct input_dev *dev;
+	int key;
+};
+
 static struct sonypi_device {
 	struct pci_dev *dev;
 	struct platform_device *pdev;
@@ -710,22 +715,61 @@ static void sonypi_setbluetoothpower(u8 state)
 
 static void input_keyrelease(void *data)
 {
-	struct input_dev *input_dev;
-	int key;
-
-	while (1) {
-		if (kfifo_get(sonypi_device.input_fifo,
-			      (unsigned char *)&input_dev,
-			      sizeof(input_dev)) != sizeof(input_dev))
-			return;
-		if (kfifo_get(sonypi_device.input_fifo,
-			      (unsigned char *)&key,
-			      sizeof(key)) != sizeof(key))
-			return;
+	struct sonypi_keypress kp;
 
+	while (kfifo_get(sonypi_device.input_fifo, (unsigned char *)&kp,
+			 sizeof(kp)) == sizeof(kp)) {
 		msleep(10);
-		input_report_key(input_dev, key, 0);
-		input_sync(input_dev);
+		input_report_key(kp.dev, kp.key, 0);
+		input_sync(kp.dev);
+	}
+}
+
+static void sonypi_report_input_event(u8 event)
+{
+	struct input_dev *jog_dev = &sonypi_device.input_jog_dev;
+	struct input_dev *key_dev = &sonypi_device.input_key_dev;
+	struct sonypi_keypress kp = { NULL };
+	int i;
+
+	switch (event) {
+	case SONYPI_EVENT_JOGDIAL_UP:
+	case SONYPI_EVENT_JOGDIAL_UP_PRESSED:
+		input_report_rel(jog_dev, REL_WHEEL, 1);
+		input_sync(jog_dev);
+		break;
+
+	case SONYPI_EVENT_JOGDIAL_DOWN:
+	case SONYPI_EVENT_JOGDIAL_DOWN_PRESSED:
+		input_report_rel(jog_dev, REL_WHEEL, -1);
+		input_sync(jog_dev);
+		break;
+
+	case SONYPI_EVENT_JOGDIAL_PRESSED:
+		kp.key = BTN_MIDDLE;
+		kp.dev = jog_dev;
+		break;
+
+	case SONYPI_EVENT_FNKEY_RELEASED:
+		/* Nothing, not all VAIOs generate this event */
+		break;
+
+	default:
+		for (i = 0; sonypi_inputkeys[i].sonypiev; i++)
+			if (event == sonypi_inputkeys[i].sonypiev) {
+				kp.dev = key_dev;
+				kp.key = sonypi_inputkeys[i].inputev;
+				break;
+			}
+		break;
+	}
+
+	if (kp.dev) {
+		input_report_key(kp.dev, kp.key, 1);
+		input_sync(kp.dev);
+		kfifo_put(sonypi_device.input_fifo,
+			  (unsigned char *)&kp, sizeof(kp));
+		schedule_work(&sonypi_device.input_work);
 	}
 }
 
@@ -768,51 +812,8 @@ found:
 		printk(KERN_INFO
 		       "sonypi: event port1=0x%02x,port2=0x%02x\n", v1, v2);
 
-	if (useinput) {
-		struct input_dev *input_jog_dev = &sonypi_device.input_jog_dev;
-		struct input_dev *input_key_dev = &sonypi_device.input_key_dev;
-		switch (event) {
-		case SONYPI_EVENT_JOGDIAL_UP:
-		case SONYPI_EVENT_JOGDIAL_UP_PRESSED:
-			input_report_rel(input_jog_dev, REL_WHEEL, 1);
-			break;
-		case SONYPI_EVENT_JOGDIAL_DOWN:
-		case SONYPI_EVENT_JOGDIAL_DOWN_PRESSED:
-			input_report_rel(input_jog_dev, REL_WHEEL, -1);
-			break;
-		case SONYPI_EVENT_JOGDIAL_PRESSED: {
-			int key = BTN_MIDDLE;
-			input_report_key(input_jog_dev, key, 1);
-			kfifo_put(sonypi_device.input_fifo,
-				  (unsigned char *)&input_jog_dev,
-				  sizeof(input_jog_dev));
-			kfifo_put(sonypi_device.input_fifo,
-				  (unsigned char *)&key, sizeof(key));
-			break;
-		}
-		case SONYPI_EVENT_FNKEY_RELEASED:
-			/* Nothing, not all VAIOs generate this event */
-			break;
-		}
-		input_sync(input_jog_dev);
-
-		for (i = 0; sonypi_inputkeys[i].sonypiev; i++) {
-			int key;
-
-			if (event != sonypi_inputkeys[i].sonypiev)
-				continue;
-
-			key = sonypi_inputkeys[i].inputev;
-			input_report_key(input_key_dev, key, 1);
-			kfifo_put(sonypi_device.input_fifo,
-				  (unsigned char *)&input_key_dev,
-				  sizeof(input_key_dev));
-			kfifo_put(sonypi_device.input_fifo,
-				  (unsigned char *)&key, sizeof(key));
-		}
-		input_sync(input_key_dev);
-		schedule_work(&sonypi_device.input_work);
-	}
+	if (useinput)
+		sonypi_report_input_event(event);
 
 	kfifo_put(sonypi_device.fifo, (unsigned char *)&event, sizeof(event));
 	kill_fasync(&sonypi_device.fifo_async, SIGIO, POLL_IN);
@@ -1227,14 +1228,7 @@ static int __devinit sonypi_probe(void)
 		sonypi_device.input_jog_dev.keybit[LONG(BTN_MOUSE)] =
 			BIT(BTN_MIDDLE);
 		sonypi_device.input_jog_dev.relbit[0] = BIT(REL_WHEEL);
-		sonypi_device.input_jog_dev.name =
-			kmalloc(sizeof(SONYPI_JOG_INPUTNAME), GFP_KERNEL);
-		if (!sonypi_device.input_jog_dev.name) {
-			printk(KERN_ERR "sonypi: kmalloc failed\n");
-			ret = -ENOMEM;
-			goto out_inkmallocinput1;
-		}
-		sprintf(sonypi_device.input_jog_dev.name, SONYPI_JOG_INPUTNAME);
+		sonypi_device.input_jog_dev.name = SONYPI_JOG_INPUTNAME;
 		sonypi_device.input_jog_dev.id.bustype = BUS_ISA;
 		sonypi_device.input_jog_dev.id.vendor = PCI_VENDOR_ID_SONY;
 
@@ -1248,14 +1242,7 @@ static int __devinit sonypi_probe(void)
 			if (sonypi_inputkeys[i].inputev)
 				set_bit(sonypi_inputkeys[i].inputev,
 					sonypi_device.input_key_dev.keybit);
-		sonypi_device.input_key_dev.name =
-			kmalloc(sizeof(SONYPI_KEY_INPUTNAME), GFP_KERNEL);
-		if (!sonypi_device.input_key_dev.name) {
-			printk(KERN_ERR "sonypi: kmalloc failed\n");
-			ret = -ENOMEM;
-			goto out_inkmallocinput2;
-		}
-		sprintf(sonypi_device.input_key_dev.name, SONYPI_KEY_INPUTNAME);
+		sonypi_device.input_key_dev.name = SONYPI_KEY_INPUTNAME;
 		sonypi_device.input_key_dev.id.bustype = BUS_ISA;
 		sonypi_device.input_key_dev.id.vendor = PCI_VENDOR_ID_SONY;
 
@@ -1313,11 +1300,7 @@ out_platformdev:
 	kfifo_free(sonypi_device.input_fifo);
 out_infifo:
 	input_unregister_device(&sonypi_device.input_key_dev);
-	kfree(sonypi_device.input_key_dev.name);
-out_inkmallocinput2:
 	input_unregister_device(&sonypi_device.input_jog_dev);
-	kfree(sonypi_device.input_jog_dev.name);
-out_inkmallocinput1:
 	free_irq(sonypi_device.irq, sonypi_irq);
 out_reqirq:
 	release_region(sonypi_device.ioport1, sonypi_device.region_size);
@@ -1337,13 +1320,14 @@ static void __devexit sonypi_remove(void)
 {
 	sonypi_disable();
 
+	synchronize_sched();  /* Allow sonypi interrupt to complete. */
+	flush_scheduled_work();
+
 	platform_device_unregister(sonypi_device.pdev);
 
 	if (useinput) {
 		input_unregister_device(&sonypi_device.input_key_dev);
-		kfree(sonypi_device.input_key_dev.name);
 		input_unregister_device(&sonypi_device.input_jog_dev);
-		kfree(sonypi_device.input_jog_dev.name);
 		kfifo_free(sonypi_device.input_fifo);
 	}
 

drivers/cpufreq/cpufreq.c

@@ -1130,7 +1130,7 @@ int cpufreq_driver_target(struct cpufreq_policy *policy,
 			  unsigned int target_freq,
 			  unsigned int relation)
 {
-	unsigned int ret;
+	int ret;
 
 	policy = cpufreq_cpu_get(policy->cpu);
 	if (!policy)
@@ -1151,7 +1151,7 @@ EXPORT_SYMBOL_GPL(cpufreq_driver_target);
 
 static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event)
 {
-	int ret = -EINVAL;
+	int ret;
 
 	if (!try_module_get(policy->governor->owner))
 		return -EINVAL;

drivers/firmware/pcdp.c

@@ -25,14 +25,22 @@ setup_serial_console(struct pcdp_uart *uart)
 #ifdef CONFIG_SERIAL_8250_CONSOLE
 	int mmio;
 	static char options[64], *p = options;
+	char parity;
 
 	mmio = (uart->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY);
 	p += sprintf(p, "console=uart,%s,0x%lx",
 		mmio ? "mmio" : "io", uart->addr.address);
-	if (uart->baud)
+	if (uart->baud) {
 		p += sprintf(p, ",%lu", uart->baud);
-	if (uart->bits)
-		p += sprintf(p, "n%d", uart->bits);
+		if (uart->bits) {
+			switch (uart->parity) {
+			    case 0x2: parity = 'e'; break;
+			    case 0x3: parity = 'o'; break;
+			    default:  parity = 'n';
+			}
+			p += sprintf(p, "%c%d", parity, uart->bits);
+		}
+	}
 
 	return early_serial_console_init(options);
 #else

drivers/hwmon/adm1026.c

@@ -393,7 +393,7 @@ void adm1026_init_client(struct i2c_client *client)
 
 	value = data->config3;
 	if (data->config3 & CFG3_GPIO16_ENABLE) {
-		dev_dbg(&client->dev, "GPIO16 enabled.  THERM"
+		dev_dbg(&client->dev, "GPIO16 enabled.  THERM "
 			"pin disabled.\n");
 	} else {
 		dev_dbg(&client->dev, "THERM pin enabled.  "

drivers/hwmon/atxp1.c

@@ -21,6 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
+#include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-sensor.h>
 #include <linux/i2c-vid.h>
@@ -80,9 +81,7 @@ static struct atxp1_data * atxp1_update_device(struct device *dev)
 
 	down(&data->update_lock);
 
-	if ((jiffies - data->last_updated > HZ) ||
-	    (jiffies < data->last_updated) ||
-	    !data->valid) {
+	if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
 
 		/* Update local register data */
 		data->reg.vid = i2c_smbus_read_byte_data(client, ATXP1_VID);

drivers/hwmon/fscpos.c

@@ -32,6 +32,7 @@
 
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-sensor.h>
 #include <linux/init.h>
@@ -572,8 +573,7 @@ static struct fscpos_data *fscpos_update_device(struct device *dev)
 
 	down(&data->update_lock);
 
-	if ((jiffies - data->last_updated > 2 * HZ) ||
-			(jiffies < data->last_updated) || !data->valid) {
+	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
 		int i;
 
 		dev_dbg(&client->dev, "Starting fscpos update\n");

drivers/hwmon/gl520sm.c

@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/jiffies.h>
 #include <linux/i2c.h>
 #include <linux/i2c-sensor.h>
 #include <linux/i2c-vid.h>
@@ -678,8 +679,7 @@ static struct gl520_data *gl520_update_device(struct device *dev)
 
 	down(&data->update_lock);
 
-	if ((jiffies - data->last_updated > 2 * HZ) ||
-	    (jiffies < data->last_updated) || !data->valid) {
+	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
 
 		dev_dbg(&client->dev, "Starting gl520sm update\n");
 

drivers/hwmon/max1619.c

@@ -363,7 +363,7 @@ static void __exit sensors_max1619_exit(void)
 	i2c_del_driver(&max1619_driver);
 }
 
-MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and"
+MODULE_AUTHOR("Alexey Fisher <fishor@mail.ru> and "
 	"Jean Delvare <khali@linux-fr.org>");
 MODULE_DESCRIPTION("MAX1619 sensor driver");
 MODULE_LICENSE("GPL");

drivers/hwmon/pc87360.c

@@ -1043,7 +1043,7 @@ static void pc87360_init_client(struct i2c_client *client, int use_thermistors)
 	if (init >= 2 && data->innr) {
 		reg = pc87360_read_value(data, LD_IN, NO_BANK,
 					 PC87365_REG_IN_CONVRATE);
-		dev_info(&client->dev, "VLM conversion set to"
+		dev_info(&client->dev, "VLM conversion set to "
 			 "1s period, 160us delay\n");
 		pc87360_write_value(data, LD_IN, NO_BANK,
 				    PC87365_REG_IN_CONVRATE,

drivers/i2c/busses/i2c-i801.c

@@ -137,7 +137,7 @@ static int i801_setup(struct pci_dev *dev)
 		pci_read_config_word(I801_dev, SMBBA, &i801_smba);
 		i801_smba &= 0xfff0;
 		if(i801_smba == 0) {
-			dev_err(&dev->dev, "SMB base address uninitialized"
+			dev_err(&dev->dev, "SMB base address uninitialized "
 				"- upgrade BIOS or use force_addr=0xaddr\n");
 			return -ENODEV;
 		}
@@ -186,7 +186,7 @@ static int i801_transaction(void)
 	int result = 0;
 	int timeout = 0;
 
-	dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x,"
+	dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
 		"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
 		inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
 		inb_p(SMBHSTDAT1));
@@ -240,7 +240,7 @@ static int i801_transaction(void)
 		outb_p(inb(SMBHSTSTS), SMBHSTSTS);
 
 	if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
-		dev_dbg(&I801_dev->dev, "Failed reset at end of transaction"
+		dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
 			"(%02x)\n", temp);
 	}
 	dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "

drivers/i2c/busses/i2c-mpc.c

@@ -382,6 +382,100 @@ static void __exit fsl_i2c_exit(void)
 module_init(fsl_i2c_init);
 module_exit(fsl_i2c_exit);
 
+static int fsl_i2c_probe(struct device *device)
+{
+	int result = 0;
+	struct mpc_i2c *i2c;
+	struct platform_device *pdev = to_platform_device(device);
+	struct fsl_i2c_platform_data *pdata;
+	struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data;
+
+	if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) {
+		return -ENOMEM;
+	}
+	memset(i2c, 0, sizeof(*i2c));
+
+	i2c->irq = platform_get_irq(pdev, 0);
+	i2c->flags = pdata->device_flags;
+	init_waitqueue_head(&i2c->queue);
+
+	i2c->base = ioremap((phys_addr_t)r->start, MPC_I2C_REGION);
+
+	if (!i2c->base) {
+		printk(KERN_ERR "i2c-mpc - failed to map controller\n");
+		result = -ENOMEM;
+		goto fail_map;
+	}
+
+	if (i2c->irq != 0)
+		if ((result = request_irq(i2c->irq, mpc_i2c_isr,
+					  SA_SHIRQ, "i2c-mpc", i2c)) < 0) {
+			printk(KERN_ERR
+			       "i2c-mpc - failed to attach interrupt\n");
+			goto fail_irq;
+		}
+
+	mpc_i2c_setclock(i2c);
+	dev_set_drvdata(device, i2c);
+
+	i2c->adap = mpc_ops;
+	i2c_set_adapdata(&i2c->adap, i2c);
+	i2c->adap.dev.parent = &pdev->dev;
+	if ((result = i2c_add_adapter(&i2c->adap)) < 0) {
+		printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
+		goto fail_add;
+	}
+
+	return result;
+
+      fail_add:
+	if (i2c->irq != 0)
+		free_irq(i2c->irq, NULL);
+      fail_irq:
+	iounmap(i2c->base);
+      fail_map:
+	kfree(i2c);
+	return result;
+};
+
+static int fsl_i2c_remove(struct device *device)
+{
+	struct mpc_i2c *i2c = dev_get_drvdata(device);
+
+	i2c_del_adapter(&i2c->adap);
+	dev_set_drvdata(device, NULL);
+
+	if (i2c->irq != 0)
+		free_irq(i2c->irq, i2c);
+
+	iounmap(i2c->base);
+	kfree(i2c);
+	return 0;
+};
+
+/* Structure for a device driver */
+static struct device_driver fsl_i2c_driver = {
+	.name = "fsl-i2c",
+	.bus = &platform_bus_type,
+	.probe = fsl_i2c_probe,
+	.remove = fsl_i2c_remove,
+};
+
+static int __init fsl_i2c_init(void)
+{
+	return driver_register(&fsl_i2c_driver);
+}
+
+static void __exit fsl_i2c_exit(void)
+{
+	driver_unregister(&fsl_i2c_driver);
+}
+
+module_init(fsl_i2c_init);
+module_exit(fsl_i2c_exit);
+
 MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
 MODULE_DESCRIPTION
     ("I2C-Bus adapter for MPC107 bridge and MPC824x/85xx/52xx processors");

drivers/i2c/chips/ds1337.c

@@ -165,7 +165,7 @@ static int ds1337_set_datetime(struct i2c_client *client, struct rtc_time *dt)
 	buf[0] = 0;		/* reg offset */
 	buf[1] = BIN2BCD(dt->tm_sec);
 	buf[2] = BIN2BCD(dt->tm_min);
-	buf[3] = BIN2BCD(dt->tm_hour) | (1 << 6);
+	buf[3] = BIN2BCD(dt->tm_hour);
 	buf[4] = BIN2BCD(dt->tm_wday) + 1;
 	buf[5] = BIN2BCD(dt->tm_mday);
 	buf[6] = BIN2BCD(dt->tm_mon) + 1;
@@ -344,9 +344,9 @@ static void ds1337_init_client(struct i2c_client *client)
 
 	/* Ensure that device is set in 24-hour mode */
 	val = i2c_smbus_read_byte_data(client, DS1337_REG_HOUR);
-	if ((val >= 0) && (val & (1 << 6)) == 0)
+	if ((val >= 0) && (val & (1 << 6)))
 		i2c_smbus_write_byte_data(client, DS1337_REG_HOUR,
-					  val | (1 << 6));
+					  val & 0x3f);
 }
 
 static int ds1337_detach_client(struct i2c_client *client)

drivers/i2c/chips/eeprom.c

@@ -163,6 +163,11 @@ int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
 	struct eeprom_data *data;
 	int err = 0;
 
+	/* prevent 24RF08 corruption */
+	if (kind < 0)
+		i2c_smbus_xfer(adapter, address, 0, 0, 0,
+			       I2C_SMBUS_QUICK, NULL);
+
 	/* There are three ways we can read the EEPROM data:
 	   (1) I2C block reads (faster, but unsupported by most adapters)
 	   (2) Consecutive byte reads (100% overhead)
@@ -187,9 +192,6 @@ int eeprom_detect(struct i2c_adapter *adapter, int address, int kind)
 	new_client->driver = &eeprom_driver;
 	new_client->flags = 0;
 
-	/* prevent 24RF08 corruption */
-	i2c_smbus_write_quick(new_client, 0);
-
 	/* Fill in the remaining client fields */
 	strlcpy(new_client->name, "eeprom", I2C_NAME_SIZE);
 	data->valid = 0;

drivers/i2c/chips/max6875.c

@@ -343,6 +343,11 @@ static int max6875_detect(struct i2c_adapter *adapter, int address, int kind)
 	struct max6875_data *data;
 	int err = 0;
 
+	/* Prevent 24RF08 corruption (in case of user error) */
+	if (kind < 0)
+		i2c_smbus_xfer(adapter, address, 0, 0, 0,
+			       I2C_SMBUS_QUICK, NULL);
+
 	/* There are three ways we can read the EEPROM data:
 	   (1) I2C block reads (faster, but unsupported by most adapters)
 	   (2) Consecutive byte reads (100% overhead)
@@ -370,9 +375,6 @@ static int max6875_detect(struct i2c_adapter *adapter, int address, int kind)
 	new_client->driver = &max6875_driver;
 	new_client->flags = 0;
 
-	/* Prevent 24RF08 corruption */
-	i2c_smbus_write_quick(new_client, 0);
-
 	/* Setup the user section */
 	data->blocks[max6875_eeprom_user].type    = max6875_eeprom_user;
 	data->blocks[max6875_eeprom_user].slices  = USER_EEPROM_SLICES;

drivers/i2c/i2c-core.c

@@ -231,8 +231,8 @@ int i2c_del_adapter(struct i2c_adapter *adap)
 		if (driver->detach_adapter)
 			if ((res = driver->detach_adapter(adap))) {
 				dev_warn(&adap->dev, "can't detach adapter "
-					 "while detaching driver %s: driver not "
-					 "detached!", driver->name);
+					 "while detaching driver %s: driver "
+					 "not detached!\n", driver->name);
 				goto out_unlock;
 			}
 	}
@@ -456,8 +456,8 @@ int i2c_detach_client(struct i2c_client *client)
 		res = adapter->client_unregister(client);
 		if (res) {
 			dev_err(&client->dev,
-			       "client_unregister [%s] failed, "
-			       "client not detached", client->name);
+				"client_unregister [%s] failed, "
+				"client not detached\n", client->name);
 			goto out;
 		}
 	}

drivers/ide/legacy/ide-cs.c

@@ -465,7 +465,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
 	PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
-	PCMCIA_DEVICE_PROD_ID12("EXP", "CD", 0x6f58c983, 0xaae5994f),
+	PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
 	PCMCIA_DEVICE_PROD_ID12("EXP   ", "CD-ROM", 0x0a5c52fd, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("EXP   ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
 	PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
@@ -481,6 +481,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
 	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
 	PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
+	PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, ide_ids);

drivers/input/evdev.c

@@ -320,6 +320,7 @@ static long evdev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			if (t < 0 || t >= dev->keycodemax || !dev->keycodesize) return -EINVAL;
 			if (get_user(v, ip + 1)) return -EFAULT;
 			if (v < 0 || v > KEY_MAX) return -EINVAL;
+			if (v >> (dev->keycodesize * 8)) return -EINVAL;
 			u = SET_INPUT_KEYCODE(dev, t, v);
 			clear_bit(u, dev->keybit);
 			set_bit(v, dev->keybit);

drivers/input/input.c

@@ -48,12 +48,6 @@ static LIST_HEAD(input_handler_list);
 
 static struct input_handler *input_table[8];
 
-#ifdef CONFIG_PROC_FS
-static struct proc_dir_entry *proc_bus_input_dir;
-static DECLARE_WAIT_QUEUE_HEAD(input_devices_poll_wait);
-static int input_devices_state;
-#endif
-
 void input_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
 	struct input_handle *handle;
@@ -312,6 +306,7 @@ static struct input_device_id *input_match_device(struct input_device_id *id, st
 	return NULL;
 }
 
+
 /*
  * Input hotplugging interface - loading event handlers based on
  * device bitfields.
@@ -428,6 +423,177 @@ static void input_call_hotplug(char *verb, struct input_dev *dev)
 
 #endif
 
+#ifdef CONFIG_PROC_FS
+
+static struct proc_dir_entry *proc_bus_input_dir;
+static DECLARE_WAIT_QUEUE_HEAD(input_devices_poll_wait);
+static int input_devices_state;
+
+static inline void input_wakeup_procfs_readers(void)
+{
+	input_devices_state++;
+	wake_up(&input_devices_poll_wait);
+}
+
+static unsigned int input_devices_poll(struct file *file, poll_table *wait)
+{
+	int state = input_devices_state;
+	poll_wait(file, &input_devices_poll_wait, wait);
+	if (state != input_devices_state)
+		return POLLIN | POLLRDNORM;
+	return 0;
+}
+
+#define SPRINTF_BIT_B(bit, name, max) \
+	do { \
+		len += sprintf(buf + len, "B: %s", name); \
+		for (i = NBITS(max) - 1; i >= 0; i--) \
+			if (dev->bit[i]) break; \
+		for (; i >= 0; i--) \
+			len += sprintf(buf + len, "%lx ", dev->bit[i]); \
+		len += sprintf(buf + len, "\n"); \
+	} while (0)
+
+#define SPRINTF_BIT_B2(bit, name, max, ev) \
+	do { \
+		if (test_bit(ev, dev->evbit)) \
+			SPRINTF_BIT_B(bit, name, max); \
+	} while (0)
+
+static int input_devices_read(char *buf, char **start, off_t pos, int count, int *eof, void *data)
+{
+	struct input_dev *dev;
+	struct input_handle *handle;
+
+	off_t at = 0;
+	int i, len, cnt = 0;
+
+	list_for_each_entry(dev, &input_dev_list, node) {
+
+		len = sprintf(buf, "I: Bus=%04x Vendor=%04x Product=%04x Version=%04x\n",
+			dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version);
+
+		len += sprintf(buf + len, "N: Name=\"%s\"\n", dev->name ? dev->name : "");
+		len += sprintf(buf + len, "P: Phys=%s\n", dev->phys ? dev->phys : "");
+		len += sprintf(buf + len, "H: Handlers=");
+
+		list_for_each_entry(handle, &dev->h_list, d_node)
+			len += sprintf(buf + len, "%s ", handle->name);
+
+		len += sprintf(buf + len, "\n");
+
+		SPRINTF_BIT_B(evbit, "EV=", EV_MAX);
+		SPRINTF_BIT_B2(keybit, "KEY=", KEY_MAX, EV_KEY);
+		SPRINTF_BIT_B2(relbit, "REL=", REL_MAX, EV_REL);
+		SPRINTF_BIT_B2(absbit, "ABS=", ABS_MAX, EV_ABS);
+		SPRINTF_BIT_B2(mscbit, "MSC=", MSC_MAX, EV_MSC);
+		SPRINTF_BIT_B2(ledbit, "LED=", LED_MAX, EV_LED);
+		SPRINTF_BIT_B2(sndbit, "SND=", SND_MAX, EV_SND);
+		SPRINTF_BIT_B2(ffbit,  "FF=",  FF_MAX, EV_FF);
+
+		len += sprintf(buf + len, "\n");
+
+		at += len;
+
+		if (at >= pos) {
+			if (!*start) {
+				*start = buf + (pos - (at - len));
+				cnt = at - pos;
+			} else  cnt += len;
+			buf += len;
+			if (cnt >= count)
+				break;
+		}
+	}
+
+	if (&dev->node == &input_dev_list)
+		*eof = 1;
+
+	return (count > cnt) ? cnt : count;
+}
+
+static int input_handlers_read(char *buf, char **start, off_t pos, int count, int *eof, void *data)
+{
+	struct input_handler *handler;
+
+	off_t at = 0;
+	int len = 0, cnt = 0;
+	int i = 0;
+
+	list_for_each_entry(handler, &input_handler_list, node) {
+
+		if (handler->fops)
+			len = sprintf(buf, "N: Number=%d Name=%s Minor=%d\n",
+				i++, handler->name, handler->minor);
+		else
+			len = sprintf(buf, "N: Number=%d Name=%s\n",
+				i++, handler->name);
+
+		at += len;
+
+		if (at >= pos) {
+			if (!*start) {
+				*start = buf + (pos - (at - len));
+				cnt = at - pos;
+			} else  cnt += len;
+			buf += len;
+			if (cnt >= count)
+				break;
+		}
+	}
+	if (&handler->node == &input_handler_list)
+		*eof = 1;
+
+	return (count > cnt) ? cnt : count;
+}
+
+static struct file_operations input_fileops;
+
+static int __init input_proc_init(void)
+{
+	struct proc_dir_entry *entry;
+
+	proc_bus_input_dir = proc_mkdir("input", proc_bus);
+	if (!proc_bus_input_dir)
+		return -ENOMEM;
+
+	proc_bus_input_dir->owner = THIS_MODULE;
+
+	entry = create_proc_read_entry("devices", 0, proc_bus_input_dir, input_devices_read, NULL);
+	if (!entry)
+		goto fail1;
+
+	entry->owner = THIS_MODULE;
+	input_fileops = *entry->proc_fops;
+	entry->proc_fops = &input_fileops;
+	entry->proc_fops->poll = input_devices_poll;
+
+	entry = create_proc_read_entry("handlers", 0, proc_bus_input_dir, input_handlers_read, NULL);
+	if (!entry)
+		goto fail2;
+
+	entry->owner = THIS_MODULE;
+
+	return 0;
+
+ fail2:	remove_proc_entry("devices", proc_bus_input_dir);
+ fail1: remove_proc_entry("input", proc_bus);
+	return -ENOMEM;
+}
+
+static void input_proc_exit(void)
+{
+	remove_proc_entry("devices", proc_bus_input_dir);
+	remove_proc_entry("handlers", proc_bus_input_dir);
+	remove_proc_entry("input", proc_bus);
+}
+
+#else /* !CONFIG_PROC_FS */
+static inline void input_wakeup_procfs_readers(void) { }
+static inline int input_proc_init(void) { return 0; }
+static inline void input_proc_exit(void) { }
+#endif
+
 void input_register_device(struct input_dev *dev)
 {
 	struct input_handle *handle;
@@ -464,10 +630,7 @@ void input_register_device(struct input_dev *dev)
 	input_call_hotplug("add", dev);
 #endif
 
-#ifdef CONFIG_PROC_FS
-	input_devices_state++;
-	wake_up(&input_devices_poll_wait);
-#endif
+	input_wakeup_procfs_readers();
 }
 
 void input_unregister_device(struct input_dev *dev)
@@ -491,10 +654,7 @@ void input_unregister_device(struct input_dev *dev)
 
 	list_del_init(&dev->node);
 
-#ifdef CONFIG_PROC_FS
-	input_devices_state++;
-	wake_up(&input_devices_poll_wait);
-#endif
+	input_wakeup_procfs_readers();
 }
 
 void input_register_handler(struct input_handler *handler)
@@ -518,10 +678,7 @@ void input_register_handler(struct input_handler *handler)
 				if ((handle = handler->connect(handler, dev, id)))
 					input_link_handle(handle);
 
-#ifdef CONFIG_PROC_FS
-	input_devices_state++;
-	wake_up(&input_devices_poll_wait);
-#endif
+	input_wakeup_procfs_readers();
 }
 
 void input_unregister_handler(struct input_handler *handler)
@@ -540,10 +697,7 @@ void input_unregister_handler(struct input_handler *handler)
 	if (handler->fops != NULL)
 		input_table[handler->minor >> 5] = NULL;
 
-#ifdef CONFIG_PROC_FS
-	input_devices_state++;
-	wake_up(&input_devices_poll_wait);
-#endif
+	input_wakeup_procfs_readers();
 }
 
 static int input_open_file(struct inode *inode, struct file *file)
@@ -582,190 +736,43 @@ static struct file_operations input_fops = {
 	.open = input_open_file,
 };
 
-#ifdef CONFIG_PROC_FS
-
-#define SPRINTF_BIT_B(bit, name, max) \
-	do { \
-		len += sprintf(buf + len, "B: %s", name); \
-		for (i = NBITS(max) - 1; i >= 0; i--) \
-			if (dev->bit[i]) break; \
-		for (; i >= 0; i--) \
-			len += sprintf(buf + len, "%lx ", dev->bit[i]); \
-		len += sprintf(buf + len, "\n"); \
-	} while (0)
-
-#define SPRINTF_BIT_B2(bit, name, max, ev) \
-	do { \
-		if (test_bit(ev, dev->evbit)) \
-			SPRINTF_BIT_B(bit, name, max); \
-	} while (0)
-
-
-static unsigned int input_devices_poll(struct file *file, poll_table *wait)
-{
-	int state = input_devices_state;
-	poll_wait(file, &input_devices_poll_wait, wait);
-	if (state != input_devices_state)
-		return POLLIN | POLLRDNORM;
-	return 0;
-}
+struct class *input_class;
 
-static int input_devices_read(char *buf, char **start, off_t pos, int count, int *eof, void *data)
+static int __init input_init(void)
 {
-	struct input_dev *dev;
-	struct input_handle *handle;
-
-	off_t at = 0;
-	int i, len, cnt = 0;
-
-	list_for_each_entry(dev, &input_dev_list, node) {
-
-		len = sprintf(buf, "I: Bus=%04x Vendor=%04x Product=%04x Version=%04x\n",
-			dev->id.bustype, dev->id.vendor, dev->id.product, dev->id.version);
-
-		len += sprintf(buf + len, "N: Name=\"%s\"\n", dev->name ? dev->name : "");
-		len += sprintf(buf + len, "P: Phys=%s\n", dev->phys ? dev->phys : "");
-		len += sprintf(buf + len, "H: Handlers=");
-
-		list_for_each_entry(handle, &dev->h_list, d_node)
-			len += sprintf(buf + len, "%s ", handle->name);
-
-		len += sprintf(buf + len, "\n");
-
-		SPRINTF_BIT_B(evbit, "EV=", EV_MAX);
-		SPRINTF_BIT_B2(keybit, "KEY=", KEY_MAX, EV_KEY);
-		SPRINTF_BIT_B2(relbit, "REL=", REL_MAX, EV_REL);
-		SPRINTF_BIT_B2(absbit, "ABS=", ABS_MAX, EV_ABS);
-		SPRINTF_BIT_B2(mscbit, "MSC=", MSC_MAX, EV_MSC);
-		SPRINTF_BIT_B2(ledbit, "LED=", LED_MAX, EV_LED);
-		SPRINTF_BIT_B2(sndbit, "SND=", SND_MAX, EV_SND);
-		SPRINTF_BIT_B2(ffbit,  "FF=",  FF_MAX, EV_FF);
-
-		len += sprintf(buf + len, "\n");
-
-		at += len;
+	int err;
 
-		if (at >= pos) {
-			if (!*start) {
-				*start = buf + (pos - (at - len));
-				cnt = at - pos;
-			} else  cnt += len;
-			buf += len;
-			if (cnt >= count)
-				break;
-		}
+	input_class = class_create(THIS_MODULE, "input");
+	if (IS_ERR(input_class)) {
+		printk(KERN_ERR "input: unable to register input class\n");
+		return PTR_ERR(input_class);
 	}
 
-	if (&dev->node == &input_dev_list)
-		*eof = 1;
-
-	return (count > cnt) ? cnt : count;
-}
-
-static int input_handlers_read(char *buf, char **start, off_t pos, int count, int *eof, void *data)
-{
-	struct input_handler *handler;
-
-	off_t at = 0;
-	int len = 0, cnt = 0;
-	int i = 0;
-
-	list_for_each_entry(handler, &input_handler_list, node) {
-
-		if (handler->fops)
-			len = sprintf(buf, "N: Number=%d Name=%s Minor=%d\n",
-				i++, handler->name, handler->minor);
-		else
-			len = sprintf(buf, "N: Number=%d Name=%s\n",
-				i++, handler->name);
-
-		at += len;
+	err = input_proc_init();
+	if (err)
+		goto fail1;
 
-		if (at >= pos) {
-			if (!*start) {
-				*start = buf + (pos - (at - len));
-				cnt = at - pos;
-			} else  cnt += len;
-			buf += len;
-			if (cnt >= count)
-				break;
-		}
+	err = register_chrdev(INPUT_MAJOR, "input", &input_fops);
+	if (err) {
+		printk(KERN_ERR "input: unable to register char major %d", INPUT_MAJOR);
+		goto fail2;
 	}
-	if (&handler->node == &input_handler_list)
-		*eof = 1;
-
-	return (count > cnt) ? cnt : count;
-}
-
-static struct file_operations input_fileops;
 
-static int __init input_proc_init(void)
-{
-	struct proc_dir_entry *entry;
+	err = devfs_mk_dir("input");
+	if (err)
+		goto fail3;
 
-	proc_bus_input_dir = proc_mkdir("input", proc_bus);
-	if (proc_bus_input_dir == NULL)
-		return -ENOMEM;
-	proc_bus_input_dir->owner = THIS_MODULE;
-	entry = create_proc_read_entry("devices", 0, proc_bus_input_dir, input_devices_read, NULL);
-	if (entry == NULL) {
-		remove_proc_entry("input", proc_bus);
-		return -ENOMEM;
-	}
-	entry->owner = THIS_MODULE;
-	input_fileops = *entry->proc_fops;
-	entry->proc_fops = &input_fileops;
-	entry->proc_fops->poll = input_devices_poll;
-	entry = create_proc_read_entry("handlers", 0, proc_bus_input_dir, input_handlers_read, NULL);
-	if (entry == NULL) {
-		remove_proc_entry("devices", proc_bus_input_dir);
-		remove_proc_entry("input", proc_bus);
-		return -ENOMEM;
-	}
-	entry->owner = THIS_MODULE;
 	return 0;
-}
-#else /* !CONFIG_PROC_FS */
-static inline int input_proc_init(void) { return 0; }
-#endif
 
-struct class *input_class;
-
-static int __init input_init(void)
-{
-	int retval = -ENOMEM;
-
-	input_class = class_create(THIS_MODULE, "input");
-	if (IS_ERR(input_class))
-		return PTR_ERR(input_class);
-	input_proc_init();
-	retval = register_chrdev(INPUT_MAJOR, "input", &input_fops);
-	if (retval) {
-		printk(KERN_ERR "input: unable to register char major %d", INPUT_MAJOR);
-		remove_proc_entry("devices", proc_bus_input_dir);
-		remove_proc_entry("handlers", proc_bus_input_dir);
-		remove_proc_entry("input", proc_bus);
-		class_destroy(input_class);
-		return retval;
-	}
-
-	retval = devfs_mk_dir("input");
-	if (retval) {
-		remove_proc_entry("devices", proc_bus_input_dir);
-		remove_proc_entry("handlers", proc_bus_input_dir);
-		remove_proc_entry("input", proc_bus);
-		unregister_chrdev(INPUT_MAJOR, "input");
-		class_destroy(input_class);
-	}
-	return retval;
+ fail3:	unregister_chrdev(INPUT_MAJOR, "input");
+ fail2:	input_proc_exit();
+ fail1:	class_destroy(input_class);
+	return err;
 }
 
 static void __exit input_exit(void)
 {
-	remove_proc_entry("devices", proc_bus_input_dir);
-	remove_proc_entry("handlers", proc_bus_input_dir);
-	remove_proc_entry("input", proc_bus);
-
+	input_proc_exit();
 	devfs_remove("input");
 	unregister_chrdev(INPUT_MAJOR, "input");
 	class_destroy(input_class);

drivers/input/joydev.c

@@ -37,8 +37,6 @@ MODULE_LICENSE("GPL");
 #define JOYDEV_MINORS		16
 #define JOYDEV_BUFFER_SIZE	64
 
-#define MSECS(t)	(1000 * ((t) / HZ) + 1000 * ((t) % HZ) / HZ)
-
 struct joydev {
 	int exist;
 	int open;
@@ -117,7 +115,7 @@ static void joydev_event(struct input_handle *handle, unsigned int type, unsigne
 			return;
 	}
 
-	event.time = MSECS(jiffies);
+	event.time = jiffies_to_msecs(jiffies);
 
 	list_for_each_entry(list, &joydev->list, node) {
 
@@ -245,7 +243,7 @@ static ssize_t joydev_read(struct file *file, char __user *buf, size_t count, lo
 
 		struct js_event event;
 
-		event.time = MSECS(jiffies);
+		event.time = jiffies_to_msecs(jiffies);
 
 		if (list->startup < joydev->nkey) {
 			event.type = JS_EVENT_BUTTON | JS_EVENT_INIT;

drivers/input/misc/uinput.c

@@ -36,16 +36,6 @@
 #include <linux/miscdevice.h>
 #include <linux/uinput.h>
 
-static int uinput_dev_open(struct input_dev *dev)
-{
-	return 0;
-}
-
-static void uinput_dev_close(struct input_dev *dev)
-{
-
-}
-
 static int uinput_dev_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
 {
 	struct uinput_device	*udev;
@@ -63,22 +53,24 @@ static int uinput_dev_event(struct input_dev *dev, unsigned int type, unsigned i
 	return 0;
 }
 
-static int uinput_request_alloc_id(struct input_dev *dev, struct uinput_request *request)
+static int uinput_request_alloc_id(struct uinput_device *udev, struct uinput_request *request)
 {
 	/* Atomically allocate an ID for the given request. Returns 0 on success. */
-	struct uinput_device *udev = dev->private;
 	int id;
+	int err = -1;
+
+	spin_lock(&udev->requests_lock);
 
-	down(&udev->requests_sem);
-	for (id=0; id<UINPUT_NUM_REQUESTS; id++)
+	for (id = 0; id < UINPUT_NUM_REQUESTS; id++)
 		if (!udev->requests[id]) {
-			udev->requests[id] = request;
 			request->id = id;
-			up(&udev->requests_sem);
-			return 0;
+			udev->requests[id] = request;
+			err = 0;
+			break;
 		}
-	up(&udev->requests_sem);
-	return -1;
+
+	spin_unlock(&udev->requests_lock);
+	return err;
 }
 
 static struct uinput_request* uinput_request_find(struct uinput_device *udev, int id)
@@ -86,70 +78,78 @@ static struct uinput_request* uinput_request_find(struct uinput_device *udev, in
 	/* Find an input request, by ID. Returns NULL if the ID isn't valid. */
 	if (id >= UINPUT_NUM_REQUESTS || id < 0)
 		return NULL;
-	if (udev->requests[id]->completed)
-		return NULL;
 	return udev->requests[id];
 }
 
-static void uinput_request_init(struct input_dev *dev, struct uinput_request *request, int code)
+static inline int uinput_request_reserve_slot(struct uinput_device *udev, struct uinput_request *request)
 {
-	struct uinput_device *udev = dev->private;
+	/* Allocate slot. If none are available right away, wait. */
+	return wait_event_interruptible(udev->requests_waitq,
+					!uinput_request_alloc_id(udev, request));
+}
 
-	memset(request, 0, sizeof(struct uinput_request));
-	request->code = code;
-	init_waitqueue_head(&request->waitq);
+static void uinput_request_done(struct uinput_device *udev, struct uinput_request *request)
+{
+	complete(&request->done);
 
-	/* Allocate an ID. If none are available right away, wait. */
-	request->retval = wait_event_interruptible(udev->requests_waitq,
-				       !uinput_request_alloc_id(dev, request));
+	/* Mark slot as available */
+	udev->requests[request->id] = NULL;
+	wake_up_interruptible(&udev->requests_waitq);
 }
 
-static void uinput_request_submit(struct input_dev *dev, struct uinput_request *request)
+static int uinput_request_submit(struct input_dev *dev, struct uinput_request *request)
 {
-	struct uinput_device *udev = dev->private;
 	int retval;
 
 	/* Tell our userspace app about this new request by queueing an input event */
 	uinput_dev_event(dev, EV_UINPUT, request->code, request->id);
 
 	/* Wait for the request to complete */
-	retval = wait_event_interruptible(request->waitq, request->completed);
-	if (retval)
-		request->retval = retval;
+	retval = wait_for_completion_interruptible(&request->done);
+	if (!retval)
+		retval = request->retval;
 
-	/* Release this request's ID, let others know it's available */
-	udev->requests[request->id] = NULL;
-	wake_up_interruptible(&udev->requests_waitq);
+	return retval;
 }
 
 static int uinput_dev_upload_effect(struct input_dev *dev, struct ff_effect *effect)
 {
 	struct uinput_request request;
+	int retval;
 
 	if (!test_bit(EV_FF, dev->evbit))
 		return -ENOSYS;
 
-	uinput_request_init(dev, &request, UI_FF_UPLOAD);
-	if (request.retval)
-		return request.retval;
+	request.id = -1;
+	init_completion(&request.done);
+	request.code = UI_FF_UPLOAD;
 	request.u.effect = effect;
-	uinput_request_submit(dev, &request);
-	return request.retval;
+
+	retval = uinput_request_reserve_slot(dev->private, &request);
+	if (!retval)
+		retval = uinput_request_submit(dev, &request);
+
+	return retval;
 }
 
 static int uinput_dev_erase_effect(struct input_dev *dev, int effect_id)
 {
 	struct uinput_request request;
+	int retval;
 
 	if (!test_bit(EV_FF, dev->evbit))
 		return -ENOSYS;
 
-	uinput_request_init(dev, &request, UI_FF_ERASE);
-	if (request.retval)
-		return request.retval;
+	request.id = -1;
+	init_completion(&request.done);
+	request.code = UI_FF_ERASE;
 	request.u.effect_id = effect_id;
-	uinput_request_submit(dev, &request);
-	return request.retval;
+
+	retval = uinput_request_reserve_slot(dev->private, &request);
+	if (!retval)
+		retval = uinput_request_submit(dev, &request);
+
+	return retval;
 }
 
 static int uinput_create_device(struct uinput_device *udev)
@@ -159,32 +159,30 @@ static int uinput_create_device(struct uinput_device *udev)
 		return -EINVAL;
 	}
 
-	udev->dev->open = uinput_dev_open;
-	udev->dev->close = uinput_dev_close;
 	udev->dev->event = uinput_dev_event;
 	udev->dev->upload_effect = uinput_dev_upload_effect;
 	udev->dev->erase_effect = uinput_dev_erase_effect;
 	udev->dev->private = udev;
 
-	init_waitqueue_head(&(udev->waitq));
+	init_waitqueue_head(&udev->waitq);
 
 	input_register_device(udev->dev);
 
-	set_bit(UIST_CREATED, &(udev->state));
+	set_bit(UIST_CREATED, &udev->state);
 
 	return 0;
 }
 
 static int uinput_destroy_device(struct uinput_device *udev)
 {
-	if (!test_bit(UIST_CREATED, &(udev->state))) {
+	if (!test_bit(UIST_CREATED, &udev->state)) {
 		printk(KERN_WARNING "%s: create the device first\n", UINPUT_NAME);
 		return -EINVAL;
 	}
 
 	input_unregister_device(udev->dev);
 
-	clear_bit(UIST_CREATED, &(udev->state));
+	clear_bit(UIST_CREATED, &udev->state);
 
 	return 0;
 }
@@ -198,7 +196,7 @@ static int uinput_open(struct inode *inode, struct file *file)
 	if (!newdev)
 		goto error;
 	memset(newdev, 0, sizeof(struct uinput_device));
-	init_MUTEX(&newdev->requests_sem);
+	spin_lock_init(&newdev->requests_lock);
 	init_waitqueue_head(&newdev->requests_waitq);
 
 	newinput = kmalloc(sizeof(struct input_dev), GFP_KERNEL);
@@ -253,15 +251,16 @@ static int uinput_alloc_device(struct file *file, const char __user *buffer, siz
 	struct uinput_user_dev	*user_dev;
 	struct input_dev	*dev;
 	struct uinput_device	*udev;
-	int			size,
-				retval;
+	char			*name;
+	int			size;
+	int			retval;
 
 	retval = count;
 
 	udev = file->private_data;
 	dev = udev->dev;
 
-	user_dev = kmalloc(sizeof(*user_dev), GFP_KERNEL);
+	user_dev = kmalloc(sizeof(struct uinput_user_dev), GFP_KERNEL);
 	if (!user_dev) {
 		retval = -ENOMEM;
 		goto exit;
@@ -272,17 +271,17 @@ static int uinput_alloc_device(struct file *file, const char __user *buffer, siz
 		goto exit;
 	}
 
-	if (NULL != dev->name)
+	if (dev->name)
 		kfree(dev->name);
 
 	size = strnlen(user_dev->name, UINPUT_MAX_NAME_SIZE) + 1;
-	dev->name = kmalloc(size, GFP_KERNEL);
-	if (!dev->name) {
+	dev->name = name = kmalloc(size, GFP_KERNEL);
+	if (!name) {
 		retval = -ENOMEM;
 		goto exit;
 	}
+	strlcpy(name, user_dev->name, size);
 
-	strlcpy(dev->name, user_dev->name, size);
 	dev->id.bustype	= user_dev->id.bustype;
 	dev->id.vendor	= user_dev->id.vendor;
 	dev->id.product	= user_dev->id.product;
@@ -314,14 +313,13 @@ static ssize_t uinput_write(struct file *file, const char __user *buffer, size_t
 {
 	struct uinput_device *udev = file->private_data;
 
-	if (test_bit(UIST_CREATED, &(udev->state))) {
+	if (test_bit(UIST_CREATED, &udev->state)) {
 		struct input_event	ev;
 
 		if (copy_from_user(&ev, buffer, sizeof(struct input_event)))
 			return -EFAULT;
 		input_event(udev->dev, ev.type, ev.code, ev.value);
-	}
-	else
+	} else
 		count = uinput_alloc_device(file, buffer, count);
 
 	return count;
@@ -332,26 +330,24 @@ static ssize_t uinput_read(struct file *file, char __user *buffer, size_t count,
 	struct uinput_device *udev = file->private_data;
 	int retval = 0;
 
-	if (!test_bit(UIST_CREATED, &(udev->state)))
+	if (!test_bit(UIST_CREATED, &udev->state))
 		return -ENODEV;
 
-	if ((udev->head == udev->tail) && (file->f_flags & O_NONBLOCK))
+	if (udev->head == udev->tail && (file->f_flags & O_NONBLOCK))
 		return -EAGAIN;
 
 	retval = wait_event_interruptible(udev->waitq,
-			(udev->head != udev->tail) ||
-			!test_bit(UIST_CREATED, &(udev->state)));
-
+			udev->head != udev->tail || !test_bit(UIST_CREATED, &udev->state));
 	if (retval)
 		return retval;
 
-	if (!test_bit(UIST_CREATED, &(udev->state)))
+	if (!test_bit(UIST_CREATED, &udev->state))
 		return -ENODEV;
 
 	while ((udev->head != udev->tail) &&
 	    (retval + sizeof(struct input_event) <= count)) {
-		if (copy_to_user(buffer + retval, &(udev->buff[udev->tail]),
-		    sizeof(struct input_event))) return -EFAULT;
+		if (copy_to_user(buffer + retval, &udev->buff[udev->tail], sizeof(struct input_event)))
+			return -EFAULT;
 		udev->tail = (udev->tail + 1) % UINPUT_BUFFER_SIZE;
 		retval += sizeof(struct input_event);
 	}
@@ -373,12 +369,12 @@ static unsigned int uinput_poll(struct file *file, poll_table *wait)
 
 static int uinput_burn_device(struct uinput_device *udev)
 {
-	if (test_bit(UIST_CREATED, &(udev->state)))
+	if (test_bit(UIST_CREATED, &udev->state))
 		uinput_destroy_device(udev);
 
-	if (NULL != udev->dev->name)
+	if (udev->dev->name)
 		kfree(udev->dev->name);
-	if (NULL != udev->dev->phys)
+	if (udev->dev->phys)
 		kfree(udev->dev->phys);
 
 	kfree(udev->dev);
@@ -389,7 +385,8 @@ static int uinput_burn_device(struct uinput_device *udev)
 
 static int uinput_close(struct inode *inode, struct file *file)
 {
-	return uinput_burn_device(file->private_data);
+	uinput_burn_device(file->private_data);
+	return 0;
 }
 
 static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
@@ -401,6 +398,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 	struct uinput_ff_erase  ff_erase;
 	struct uinput_request   *req;
 	int                     length;
+	char			*phys;
 
 	udev = file->private_data;
 
@@ -415,7 +413,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 		case UI_SET_SNDBIT:
 		case UI_SET_FFBIT:
 		case UI_SET_PHYS:
-			if (test_bit(UIST_CREATED, &(udev->state)))
+			if (test_bit(UIST_CREATED, &udev->state))
 				return -EINVAL;
 	}
 
@@ -498,20 +496,19 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 				retval = -EFAULT;
 				break;
 			}
-			if (NULL != udev->dev->phys)
-				kfree(udev->dev->phys);
-			udev->dev->phys = kmalloc(length, GFP_KERNEL);
-			if (!udev->dev->phys) {
+			kfree(udev->dev->phys);
+			udev->dev->phys = phys = kmalloc(length, GFP_KERNEL);
+			if (!phys) {
 				retval = -ENOMEM;
 				break;
 			}
-			if (copy_from_user(udev->dev->phys, p, length)) {
-				retval = -EFAULT;
-				kfree(udev->dev->phys);
+			if (copy_from_user(phys, p, length)) {
 				udev->dev->phys = NULL;
+				kfree(phys);
+				retval = -EFAULT;
 				break;
 			}
-			udev->dev->phys[length-1] = '\0';
+			phys[length - 1] = '\0';
 			break;
 
 		case UI_BEGIN_FF_UPLOAD:
@@ -520,7 +517,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 				break;
 			}
 			req = uinput_request_find(udev, ff_up.request_id);
-			if (!(req && req->code==UI_FF_UPLOAD && req->u.effect)) {
+			if (!(req && req->code == UI_FF_UPLOAD && req->u.effect)) {
 				retval = -EINVAL;
 				break;
 			}
@@ -538,7 +535,7 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 				break;
 			}
 			req = uinput_request_find(udev, ff_erase.request_id);
-			if (!(req && req->code==UI_FF_ERASE)) {
+			if (!(req && req->code == UI_FF_ERASE)) {
 				retval = -EINVAL;
 				break;
 			}
@@ -556,14 +553,13 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 				break;
 			}
 			req = uinput_request_find(udev, ff_up.request_id);
-			if (!(req && req->code==UI_FF_UPLOAD && req->u.effect)) {
+			if (!(req && req->code == UI_FF_UPLOAD && req->u.effect)) {
 				retval = -EINVAL;
 				break;
 			}
 			req->retval = ff_up.retval;
 			memcpy(req->u.effect, &ff_up.effect, sizeof(struct ff_effect));
-			req->completed = 1;
-			wake_up_interruptible(&req->waitq);
+			uinput_request_done(udev, req);
 			break;
 
 		case UI_END_FF_ERASE:
@@ -572,13 +568,12 @@ static int uinput_ioctl(struct inode *inode, struct file *file, unsigned int cmd
 				break;
 			}
 			req = uinput_request_find(udev, ff_erase.request_id);
-			if (!(req && req->code==UI_FF_ERASE)) {
+			if (!(req && req->code == UI_FF_ERASE)) {
 				retval = -EINVAL;
 				break;
 			}
 			req->retval = ff_erase.retval;
-			req->completed = 1;
-			wake_up_interruptible(&req->waitq);
+			uinput_request_done(udev, req);
 			break;
 
 		default:

drivers/input/mouse/alps.c

@@ -2,7 +2,7 @@
  * ALPS touchpad PS/2 mouse driver
  *
  * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
- * Copyright (c) 2003 Peter Osterlund <petero2@telia.com>
+ * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
  * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
  * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
  *
@@ -350,7 +350,6 @@ static int alps_tap_mode(struct psmouse *psmouse, int enable)
 static int alps_reconnect(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
-	unsigned char param[4];
 	int version;
 
 	psmouse_reset(psmouse);
@@ -358,21 +357,20 @@ static int alps_reconnect(struct psmouse *psmouse)
 	if (!(priv->i = alps_get_model(psmouse, &version)))
 		return -1;
 
-	if (priv->i->flags & ALPS_PASS && alps_passthrough_mode(psmouse, 1))
+	if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1))
 		return -1;
 
-	if (alps_get_status(psmouse, param))
+	if (alps_tap_mode(psmouse, 1)) {
+		printk(KERN_WARNING "alps.c: Failed to reenable hardware tapping\n");
 		return -1;
-
-	if (!(param[0] & 0x04))
-		alps_tap_mode(psmouse, 1);
+	}
 
 	if (alps_absolute_mode(psmouse)) {
-		printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
+		printk(KERN_ERR "alps.c: Failed to reenable absolute mode\n");
 		return -1;
 	}
 
-	if (priv->i->flags == ALPS_PASS && alps_passthrough_mode(psmouse, 0))
+	if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 0))
 		return -1;
 
 	return 0;
@@ -389,7 +387,6 @@ static void alps_disconnect(struct psmouse *psmouse)
 int alps_init(struct psmouse *psmouse)
 {
 	struct alps_data *priv;
-	unsigned char param[4];
 	int version;
 
 	psmouse->private = priv = kmalloc(sizeof(struct alps_data), GFP_KERNEL);
@@ -403,16 +400,8 @@ int alps_init(struct psmouse *psmouse)
 	if ((priv->i->flags & ALPS_PASS) && alps_passthrough_mode(psmouse, 1))
 		goto init_fail;
 
-	if (alps_get_status(psmouse, param)) {
-		printk(KERN_ERR "alps.c: touchpad status report request failed\n");
-		goto init_fail;
-	}
-
-	if (param[0] & 0x04) {
-		printk(KERN_INFO "alps.c: Enabling hardware tapping\n");
-		if (alps_tap_mode(psmouse, 1))
-			printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
-	}
+	if (alps_tap_mode(psmouse, 1))
+		printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
 
 	if (alps_absolute_mode(psmouse)) {
 		printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");

drivers/input/mouse/logips2pp.c

@@ -385,8 +385,6 @@ int ps2pp_init(struct psmouse *psmouse, int set_properties)
 
 		if (buttons < 3)
 			clear_bit(BTN_MIDDLE, psmouse->dev.keybit);
-		if (buttons < 2)
-			clear_bit(BTN_RIGHT, psmouse->dev.keybit);
 
 		if (model_info)
 			ps2pp_set_model_properties(psmouse, model_info, use_ps2pp);

drivers/input/mouse/psmouse-base.c

@@ -344,6 +344,7 @@ static int intellimouse_detect(struct psmouse *psmouse, int set_properties)
 		return -1;
 
 	if (set_properties) {
+		set_bit(BTN_MIDDLE, psmouse->dev.keybit);
 		set_bit(REL_WHEEL, psmouse->dev.relbit);
 
 		if (!psmouse->vendor) psmouse->vendor = "Generic";
@@ -376,6 +377,7 @@ static int im_explorer_detect(struct psmouse *psmouse, int set_properties)
 		return -1;
 
 	if (set_properties) {
+		set_bit(BTN_MIDDLE, psmouse->dev.keybit);
 		set_bit(REL_WHEEL, psmouse->dev.relbit);
 		set_bit(BTN_SIDE, psmouse->dev.keybit);
 		set_bit(BTN_EXTRA, psmouse->dev.keybit);

drivers/input/mouse/synaptics.c

@@ -219,7 +219,7 @@ static void synaptics_pass_pt_packet(struct serio *ptport, unsigned char *packet
 		serio_interrupt(ptport, packet[1], 0, NULL);
 		serio_interrupt(ptport, packet[4], 0, NULL);
 		serio_interrupt(ptport, packet[5], 0, NULL);
-		if (child->type >= PSMOUSE_GENPS)
+		if (child->pktsize == 4)
 			serio_interrupt(ptport, packet[2], 0, NULL);
 	} else
 		serio_interrupt(ptport, packet[1], 0, NULL);
@@ -233,7 +233,7 @@ static void synaptics_pt_activate(struct psmouse *psmouse)
 
 	/* adjust the touchpad to child's choice of protocol */
 	if (child) {
-		if (child->type >= PSMOUSE_GENPS)
+		if (child->pktsize == 4)
 			priv->mode |= SYN_BIT_FOUR_BYTE_CLIENT;
 		else
 			priv->mode &= ~SYN_BIT_FOUR_BYTE_CLIENT;
@@ -608,6 +608,13 @@ static struct dmi_system_id toshiba_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME , "Satellite"),
 		},
 	},
+	{
+		.ident = "Toshiba Dynabook",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+			DMI_MATCH(DMI_PRODUCT_NAME , "dynabook"),
+		},
+	},
 	{ }
 };
 #endif
@@ -656,7 +663,8 @@ int synaptics_init(struct psmouse *psmouse)
 	 * thye same as rate of standard PS/2 mouse.
 	 */
 	if (psmouse->rate >= 80 && dmi_check_system(toshiba_dmi_table)) {
-		printk(KERN_INFO "synaptics: Toshiba Satellite detected, limiting rate to 40pps.\n");
+		printk(KERN_INFO "synaptics: Toshiba %s detected, limiting rate to 40pps.\n",
+			dmi_get_system_info(DMI_PRODUCT_NAME));
 		psmouse->rate = 40;
 	}
 #endif

drivers/input/serio/Kconfig

@@ -175,7 +175,7 @@ config SERIO_RAW
 	  allocating minor 1 (that historically corresponds to /dev/psaux)
 	  first. To bind this driver to a serio port use sysfs interface:
 
-	      echo -n "serio_raw" > /sys/bus/serio/devices/serioX/driver
+	      echo -n "serio_raw" > /sys/bus/serio/devices/serioX/drvctl
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called serio_raw.

drivers/input/serio/i8042-x86ia64io.h

@@ -130,6 +130,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "FMVLT70H"),
 		},
 	},
+	{
+		.ident = "Fujitsu-Siemens Lifebook T3010",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T3010"),
+		},
+	},
 	{
 		.ident = "Toshiba P10",
 		.matches = {
@@ -137,6 +144,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P10"),
 		},
 	},
+	{
+		.ident = "Alienware Sentia",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Sentia"),
+		},
+	},
 	{ }
 };
 

drivers/input/serio/i8042.c

@@ -100,7 +100,7 @@ struct i8042_port {
 static struct i8042_port i8042_ports[I8042_NUM_PORTS] = {
 	{
 		.disable	= I8042_CTR_KBDDIS,
-		.irqen 		= I8042_CTR_KBDINT,
+		.irqen		= I8042_CTR_KBDINT,
 		.mux		= -1,
 		.name		= "KBD",
 	},
@@ -191,41 +191,45 @@ static int i8042_flush(void)
 static int i8042_command(unsigned char *param, int command)
 {
 	unsigned long flags;
-	int retval = 0, i = 0;
+	int i, retval, auxerr = 0;
 
 	if (i8042_noloop && command == I8042_CMD_AUX_LOOP)
 		return -1;
 
 	spin_lock_irqsave(&i8042_lock, flags);
 
-	retval = i8042_wait_write();
-	if (!retval) {
-		dbg("%02x -> i8042 (command)", command & 0xff);
-		i8042_write_command(command & 0xff);
+	if ((retval = i8042_wait_write()))
+		goto out;
+
+	dbg("%02x -> i8042 (command)", command & 0xff);
+	i8042_write_command(command & 0xff);
+
+	for (i = 0; i < ((command >> 12) & 0xf); i++) {
+		if ((retval = i8042_wait_write()))
+			goto out;
+		dbg("%02x -> i8042 (parameter)", param[i]);
+		i8042_write_data(param[i]);
 	}
 
-	if (!retval)
-		for (i = 0; i < ((command >> 12) & 0xf); i++) {
-			if ((retval = i8042_wait_write())) break;
-			dbg("%02x -> i8042 (parameter)", param[i]);
-			i8042_write_data(param[i]);
-		}
+	for (i = 0; i < ((command >> 8) & 0xf); i++) {
+		if ((retval = i8042_wait_read()))
+			goto out;
 
-	if (!retval)
-		for (i = 0; i < ((command >> 8) & 0xf); i++) {
-			if ((retval = i8042_wait_read())) break;
-			if (i8042_read_status() & I8042_STR_AUXDATA)
-				param[i] = ~i8042_read_data();
-			else
-				param[i] = i8042_read_data();
-			dbg("%02x <- i8042 (return)", param[i]);
+		if (command == I8042_CMD_AUX_LOOP &&
+		    !(i8042_read_status() & I8042_STR_AUXDATA)) {
+			retval = auxerr = -1;
+			goto out;
 		}
 
-	spin_unlock_irqrestore(&i8042_lock, flags);
+		param[i] = i8042_read_data();
+		dbg("%02x <- i8042 (return)", param[i]);
+	}
 
 	if (retval)
-		dbg("     -- i8042 (timeout)");
+		dbg("     -- i8042 (%s)", auxerr ? "auxerr" : "timeout");
 
+ out:
+	spin_unlock_irqrestore(&i8042_lock, flags);
 	return retval;
 }
 
@@ -507,17 +511,17 @@ static int i8042_set_mux_mode(unsigned int mode, unsigned char *mux_version)
  */
 
 	param = 0xf0;
-	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0x0f)
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xf0)
 		return -1;
 	param = mode ? 0x56 : 0xf6;
-	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != (mode ? 0xa9 : 0x09))
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != (mode ? 0x56 : 0xf6))
 		return -1;
 	param = mode ? 0xa4 : 0xa5;
-	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == (mode ? 0x5b : 0x5a))
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param == (mode ? 0xa4 : 0xa5))
 		return -1;
 
 	if (mux_version)
-		*mux_version = ~param;
+		*mux_version = param;
 
 	return 0;
 }
@@ -619,7 +623,7 @@ static int __init i8042_check_aux(void)
  */
 
 	param = 0x5a;
-	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0xa5) {
+	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0x5a) {
 
 /*
  * External connection test - filters out AT-soldered PS/2 i8042's
@@ -630,7 +634,7 @@ static int __init i8042_check_aux(void)
  */
 
 		if (i8042_command(&param, I8042_CMD_AUX_TEST)
-		    	|| (param && param != 0xfa && param != 0xff))
+			|| (param && param != 0xfa && param != 0xff))
 				return -1;
 	}
 

drivers/input/serio/serio.c

@@ -389,6 +389,14 @@ static ssize_t serio_show_description(struct device *dev, struct device_attribut
 	return sprintf(buf, "%s\n", serio->name);
 }
 
+static ssize_t serio_show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct serio *serio = to_serio_port(dev);
+
+	return sprintf(buf, "serio:ty%02Xpr%02Xid%02Xex%02X\n",
+			serio->id.type, serio->id.proto, serio->id.id, serio->id.extra);
+}
+
 static ssize_t serio_show_id_type(struct device *dev, struct device_attribute *attr, char *buf)
 {
 	struct serio *serio = to_serio_port(dev);
@@ -487,6 +495,7 @@ static ssize_t serio_set_bind_mode(struct device *dev, struct device_attribute *
 
 static struct device_attribute serio_device_attrs[] = {
 	__ATTR(description, S_IRUGO, serio_show_description, NULL),
+	__ATTR(modalias, S_IRUGO, serio_show_modalias, NULL),
 	__ATTR(drvctl, S_IWUSR, NULL, serio_rebind_driver),
 	__ATTR(bind_mode, S_IWUSR | S_IRUGO, serio_show_bind_mode, serio_set_bind_mode),
 	__ATTR_NULL
@@ -785,36 +794,37 @@ static int serio_bus_match(struct device *dev, struct device_driver *drv)
 
 #ifdef CONFIG_HOTPLUG
 
-#define PUT_ENVP(fmt, val) 						\
-do {									\
-	envp[i++] = buffer;						\
-	length += snprintf(buffer, buffer_size - length, fmt, val);	\
-	if (buffer_size - length <= 0 || i >= num_envp)			\
-		return -ENOMEM;						\
-	length++;							\
-	buffer += length;						\
-} while (0)
+#define SERIO_ADD_HOTPLUG_VAR(fmt, val...)				\
+	do {								\
+		int err = add_hotplug_env_var(envp, num_envp, &i,	\
+					buffer, buffer_size, &len,	\
+					fmt, val);			\
+		if (err)						\
+			return err;					\
+	} while (0)
+
 static int serio_hotplug(struct device *dev, char **envp, int num_envp, char *buffer, int buffer_size)
 {
 	struct serio *serio;
 	int i = 0;
-	int length = 0;
+	int len = 0;
 
 	if (!dev)
 		return -ENODEV;
 
 	serio = to_serio_port(dev);
 
-	PUT_ENVP("SERIO_TYPE=%02x", serio->id.type);
-	PUT_ENVP("SERIO_PROTO=%02x", serio->id.proto);
-	PUT_ENVP("SERIO_ID=%02x", serio->id.id);
-	PUT_ENVP("SERIO_EXTRA=%02x", serio->id.extra);
-
+	SERIO_ADD_HOTPLUG_VAR("SERIO_TYPE=%02x", serio->id.type);
+	SERIO_ADD_HOTPLUG_VAR("SERIO_PROTO=%02x", serio->id.proto);
+	SERIO_ADD_HOTPLUG_VAR("SERIO_ID=%02x", serio->id.id);
+	SERIO_ADD_HOTPLUG_VAR("SERIO_EXTRA=%02x", serio->id.extra);
+	SERIO_ADD_HOTPLUG_VAR("MODALIAS=serio:ty%02Xpr%02Xid%02Xex%02X",
+				serio->id.type, serio->id.proto, serio->id.id, serio->id.extra);
 	envp[i] = NULL;
 
 	return 0;
 }
-#undef PUT_ENVP
+#undef SERIO_ADD_HOTPLUG_VAR
 
 #else
 

drivers/input/serio/serio_raw.c

@@ -299,6 +299,7 @@ static int serio_raw_connect(struct serio *serio, struct serio_driver *drv)
 
 	serio_raw->dev.minor = PSMOUSE_MINOR;
 	serio_raw->dev.name = serio_raw->name;
+	serio_raw->dev.dev = &serio->dev;
 	serio_raw->dev.fops = &serio_raw_fops;
 
 	err = misc_register(&serio_raw->dev);

drivers/input/touchscreen/Kconfig

@@ -58,7 +58,7 @@ config TOUCHSCREEN_ELO
 	  If unsure, say N.
 
 	  To compile this driver as a module, choose M here: the
-	  module will be called gunze.
+	  module will be called elo.
 
 config TOUCHSCREEN_MTOUCH
 	tristate "MicroTouch serial touchscreens"

drivers/md/dm-table.c

@@ -869,11 +869,17 @@ static void suspend_targets(struct dm_table *t, unsigned postsuspend)
 
 void dm_table_presuspend_targets(struct dm_table *t)
 {
+	if (!t)
+		return;
+
 	return suspend_targets(t, 0);
 }
 
 void dm_table_postsuspend_targets(struct dm_table *t)
 {
+	if (!t)
+		return;
+
 	return suspend_targets(t, 1);
 }
 

drivers/md/dm.c

@@ -55,10 +55,10 @@ union map_info *dm_get_mapinfo(struct bio *bio)
  */
 #define DMF_BLOCK_IO 0
 #define DMF_SUSPENDED 1
-#define DMF_FS_LOCKED 2
 
 struct mapped_device {
-	struct rw_semaphore lock;
+	struct rw_semaphore io_lock;
+	struct semaphore suspend_lock;
 	rwlock_t map_lock;
 	atomic_t holders;
 
@@ -248,16 +248,16 @@ static inline void free_tio(struct mapped_device *md, struct target_io *tio)
  */
 static int queue_io(struct mapped_device *md, struct bio *bio)
 {
-	down_write(&md->lock);
+	down_write(&md->io_lock);
 
 	if (!test_bit(DMF_BLOCK_IO, &md->flags)) {
-		up_write(&md->lock);
+		up_write(&md->io_lock);
 		return 1;
 	}
 
 	bio_list_add(&md->deferred, bio);
 
-	up_write(&md->lock);
+	up_write(&md->io_lock);
 	return 0;		/* deferred successfully */
 }
 
@@ -568,14 +568,14 @@ static int dm_request(request_queue_t *q, struct bio *bio)
 	int r;
 	struct mapped_device *md = q->queuedata;
 
-	down_read(&md->lock);
+	down_read(&md->io_lock);
 
 	/*
 	 * If we're suspended we have to queue
 	 * this io for later.
 	 */
 	while (test_bit(DMF_BLOCK_IO, &md->flags)) {
-		up_read(&md->lock);
+		up_read(&md->io_lock);
 
 		if (bio_rw(bio) == READA) {
 			bio_io_error(bio, bio->bi_size);
@@ -594,11 +594,11 @@ static int dm_request(request_queue_t *q, struct bio *bio)
 		 * We're in a while loop, because someone could suspend
 		 * before we get to the following read lock.
 		 */
-		down_read(&md->lock);
+		down_read(&md->io_lock);
 	}
 
 	__split_bio(md, bio);
-	up_read(&md->lock);
+	up_read(&md->io_lock);
 	return 0;
 }
 
@@ -610,7 +610,7 @@ static int dm_flush_all(request_queue_t *q, struct gendisk *disk,
 	int ret = -ENXIO;
 
 	if (map) {
-		ret = dm_table_flush_all(md->map);
+		ret = dm_table_flush_all(map);
 		dm_table_put(map);
 	}
 
@@ -747,7 +747,8 @@ static struct mapped_device *alloc_dev(unsigned int minor, int persistent)
 		goto bad1;
 
 	memset(md, 0, sizeof(*md));
-	init_rwsem(&md->lock);
+	init_rwsem(&md->io_lock);
+	init_MUTEX(&md->suspend_lock);
 	rwlock_init(&md->map_lock);
 	atomic_set(&md->holders, 1);
 	atomic_set(&md->event_nr, 0);
@@ -825,18 +826,13 @@ static void event_callback(void *context)
 	wake_up(&md->eventq);
 }
 
-static void __set_size(struct gendisk *disk, sector_t size)
+static void __set_size(struct mapped_device *md, sector_t size)
 {
-	struct block_device *bdev;
-
-	set_capacity(disk, size);
-	bdev = bdget_disk(disk, 0);
-	if (bdev) {
-		down(&bdev->bd_inode->i_sem);
-		i_size_write(bdev->bd_inode, (loff_t)size << SECTOR_SHIFT);
-		up(&bdev->bd_inode->i_sem);
-		bdput(bdev);
-	}
+	set_capacity(md->disk, size);
+
+	down(&md->frozen_bdev->bd_inode->i_sem);
+	i_size_write(md->frozen_bdev->bd_inode, (loff_t)size << SECTOR_SHIFT);
+	up(&md->frozen_bdev->bd_inode->i_sem);
 }
 
 static int __bind(struct mapped_device *md, struct dm_table *t)
@@ -845,17 +841,18 @@ static int __bind(struct mapped_device *md, struct dm_table *t)
 	sector_t size;
 
 	size = dm_table_get_size(t);
-	__set_size(md->disk, size);
+	__set_size(md, size);
 	if (size == 0)
 		return 0;
 
+	dm_table_get(t);
+	dm_table_event_callback(t, event_callback, md);
+
 	write_lock(&md->map_lock);
 	md->map = t;
+	dm_table_set_restrictions(t, q);
 	write_unlock(&md->map_lock);
 
-	dm_table_get(t);
-	dm_table_event_callback(md->map, event_callback, md);
-	dm_table_set_restrictions(t, q);
 	return 0;
 }
 
@@ -935,7 +932,7 @@ void dm_put(struct mapped_device *md)
 	struct dm_table *map = dm_get_table(md);
 
 	if (atomic_dec_and_test(&md->holders)) {
-		if (!test_bit(DMF_SUSPENDED, &md->flags) && map) {
+		if (!dm_suspended(md)) {
 			dm_table_presuspend_targets(map);
 			dm_table_postsuspend_targets(map);
 		}
@@ -968,17 +965,17 @@ int dm_swap_table(struct mapped_device *md, struct dm_table *table)
 {
 	int r = -EINVAL;
 
-	down_write(&md->lock);
+	down(&md->suspend_lock);
 
 	/* device must be suspended */
-	if (!test_bit(DMF_SUSPENDED, &md->flags))
+	if (!dm_suspended(md))
 		goto out;
 
 	__unbind(md);
 	r = __bind(md, table);
 
 out:
-	up_write(&md->lock);
+	up(&md->suspend_lock);
 	return r;
 }
 
@@ -986,16 +983,13 @@ out:
  * Functions to lock and unlock any filesystem running on the
  * device.
  */
-static int __lock_fs(struct mapped_device *md)
+static int lock_fs(struct mapped_device *md)
 {
-	int error = -ENOMEM;
-
-	if (test_and_set_bit(DMF_FS_LOCKED, &md->flags))
-		return 0;
+	int r = -ENOMEM;
 
 	md->frozen_bdev = bdget_disk(md->disk, 0);
 	if (!md->frozen_bdev) {
-		DMWARN("bdget failed in __lock_fs");
+		DMWARN("bdget failed in lock_fs");
 		goto out;
 	}
 
@@ -1003,13 +997,13 @@ static int __lock_fs(struct mapped_device *md)
 
 	md->frozen_sb = freeze_bdev(md->frozen_bdev);
 	if (IS_ERR(md->frozen_sb)) {
-		error = PTR_ERR(md->frozen_sb);
+		r = PTR_ERR(md->frozen_sb);
 		goto out_bdput;
 	}
 
 	/* don't bdput right now, we don't want the bdev
 	 * to go away while it is locked.  We'll bdput
-	 * in __unlock_fs
+	 * in unlock_fs
 	 */
 	return 0;
 
@@ -1018,15 +1012,11 @@ out_bdput:
 	md->frozen_sb = NULL;
 	md->frozen_bdev = NULL;
 out:
-	clear_bit(DMF_FS_LOCKED, &md->flags);
-	return error;
+	return r;
 }
 
-static void __unlock_fs(struct mapped_device *md)
+static void unlock_fs(struct mapped_device *md)
 {
-	if (!test_and_clear_bit(DMF_FS_LOCKED, &md->flags))
-		return;
-
 	thaw_bdev(md->frozen_bdev, md->frozen_sb);
 	bdput(md->frozen_bdev);
 
@@ -1043,50 +1033,37 @@ static void __unlock_fs(struct mapped_device *md)
  */
 int dm_suspend(struct mapped_device *md)
 {
-	struct dm_table *map;
+	struct dm_table *map = NULL;
 	DECLARE_WAITQUEUE(wait, current);
-	int error = -EINVAL;
+	int r = -EINVAL;
 
-	/* Flush I/O to the device. */
-	down_read(&md->lock);
-	if (test_bit(DMF_BLOCK_IO, &md->flags))
-		goto out_read_unlock;
+	down(&md->suspend_lock);
+
+	if (dm_suspended(md))
+		goto out;
 
 	map = dm_get_table(md);
-	if (map)
-		/* This does not get reverted if there's an error later. */
-		dm_table_presuspend_targets(map);
 
-	error = __lock_fs(md);
-	if (error) {
-		dm_table_put(map);
-		goto out_read_unlock;
-	}
+	/* This does not get reverted if there's an error later. */
+	dm_table_presuspend_targets(map);
 
-	up_read(&md->lock);
+	/* Flush I/O to the device. */
+	r = lock_fs(md);
+	if (r)
+		goto out;
 
 	/*
 	 * First we set the BLOCK_IO flag so no more ios will be mapped.
-	 *
-	 * If the flag is already set we know another thread is trying to
-	 * suspend as well, so we leave the fs locked for this thread.
 	 */
-	error = -EINVAL;
-	down_write(&md->lock);
-	if (test_and_set_bit(DMF_BLOCK_IO, &md->flags)) {
-		if (map)
-			dm_table_put(map);
-		goto out_write_unlock;
-	}
+	down_write(&md->io_lock);
+	set_bit(DMF_BLOCK_IO, &md->flags);
 
 	add_wait_queue(&md->wait, &wait);
-	up_write(&md->lock);
+	up_write(&md->io_lock);
 
 	/* unplug */
-	if (map) {
+	if (map)
 		dm_table_unplug_all(map);
-		dm_table_put(map);
-	}
 
 	/*
 	 * Then we wait for the already mapped ios to
@@ -1102,62 +1079,67 @@ int dm_suspend(struct mapped_device *md)
 	}
 	set_current_state(TASK_RUNNING);
 
-	down_write(&md->lock);
+	down_write(&md->io_lock);
 	remove_wait_queue(&md->wait, &wait);
 
 	/* were we interrupted ? */
-	error = -EINTR;
-	if (atomic_read(&md->pending))
-		goto out_unfreeze;
-
-	set_bit(DMF_SUSPENDED, &md->flags);
+	r = -EINTR;
+	if (atomic_read(&md->pending)) {
+		up_write(&md->io_lock);
+		unlock_fs(md);
+		clear_bit(DMF_BLOCK_IO, &md->flags);
+		goto out;
+	}
+	up_write(&md->io_lock);
 
-	map = dm_get_table(md);
-	if (map)
-		dm_table_postsuspend_targets(map);
-	dm_table_put(map);
-	up_write(&md->lock);
+	dm_table_postsuspend_targets(map);
 
-	return 0;
+	set_bit(DMF_SUSPENDED, &md->flags);
 
-out_unfreeze:
-	__unlock_fs(md);
-	clear_bit(DMF_BLOCK_IO, &md->flags);
-out_write_unlock:
-	up_write(&md->lock);
-	return error;
+	r = 0;
 
-out_read_unlock:
-	up_read(&md->lock);
-	return error;
+out:
+	dm_table_put(map);
+	up(&md->suspend_lock);
+	return r;
 }
 
 int dm_resume(struct mapped_device *md)
 {
+	int r = -EINVAL;
 	struct bio *def;
-	struct dm_table *map = dm_get_table(md);
+	struct dm_table *map = NULL;
 
-	down_write(&md->lock);
-	if (!map ||
-	    !test_bit(DMF_SUSPENDED, &md->flags) ||
-	    !dm_table_get_size(map)) {
-		up_write(&md->lock);
-		dm_table_put(map);
-		return -EINVAL;
-	}
+	down(&md->suspend_lock);
+	if (!dm_suspended(md))
+		goto out;
+
+	map = dm_get_table(md);
+	if (!map || !dm_table_get_size(map))
+		goto out;
 
 	dm_table_resume_targets(map);
-	clear_bit(DMF_SUSPENDED, &md->flags);
+
+	down_write(&md->io_lock);
 	clear_bit(DMF_BLOCK_IO, &md->flags);
 
 	def = bio_list_get(&md->deferred);
 	__flush_deferred_io(md, def);
-	up_write(&md->lock);
-	__unlock_fs(md);
+	up_write(&md->io_lock);
+
+	unlock_fs(md);
+
+	clear_bit(DMF_SUSPENDED, &md->flags);
+
 	dm_table_unplug_all(map);
+
+	r = 0;
+
+out:
 	dm_table_put(map);
+	up(&md->suspend_lock);
 
-	return 0;
+	return r;
 }
 
 /*-----------------------------------------------------------------

drivers/net/cs89x0.c

@@ -1450,6 +1450,7 @@ static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
 	/* Write the contents of the packet */
 	outsw(dev->base_addr + TX_FRAME_PORT,skb->data,(skb->len+1) >>1);
 	spin_unlock_irq(&lp->lock);
+	lp->stats.tx_bytes += skb->len;
 	dev->trans_start = jiffies;
 	dev_kfree_skb (skb);
 

drivers/net/e1000/e1000_main.c

@@ -162,7 +162,6 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
 static void e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
 static void e1000_restore_vlan(struct e1000_adapter *adapter);
 
-static int e1000_notify_reboot(struct notifier_block *, unsigned long event, void *ptr);
 static int e1000_suspend(struct pci_dev *pdev, uint32_t state);
 #ifdef CONFIG_PM
 static int e1000_resume(struct pci_dev *pdev);
@@ -173,12 +172,6 @@ static int e1000_resume(struct pci_dev *pdev);
 static void e1000_netpoll (struct net_device *netdev);
 #endif
 
-struct notifier_block e1000_notifier_reboot = {
-	.notifier_call	= e1000_notify_reboot,
-	.next		= NULL,
-	.priority	= 0
-};
-
 /* Exported from other modules */
 
 extern void e1000_check_options(struct e1000_adapter *adapter);
@@ -221,9 +214,7 @@ e1000_init_module(void)
 	printk(KERN_INFO "%s\n", e1000_copyright);
 
 	ret = pci_module_init(&e1000_driver);
-	if(ret >= 0) {
-		register_reboot_notifier(&e1000_notifier_reboot);
-	}
+
 	return ret;
 }
 
@@ -239,7 +230,6 @@ module_init(e1000_init_module);
 static void __exit
 e1000_exit_module(void)
 {
-	unregister_reboot_notifier(&e1000_notifier_reboot);
 	pci_unregister_driver(&e1000_driver);
 }
 
@@ -3651,23 +3641,6 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx)
 	return 0;
 }
 
-static int
-e1000_notify_reboot(struct notifier_block *nb, unsigned long event, void *p)
-{
-	struct pci_dev *pdev = NULL;
-
-	switch(event) {
-	case SYS_DOWN:
-	case SYS_HALT:
-	case SYS_POWER_OFF:
-		while((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) {
-			if(pci_dev_driver(pdev) == &e1000_driver)
-				e1000_suspend(pdev, 3);
-		}
-	}
-	return NOTIFY_DONE;
-}
-
 static int
 e1000_suspend(struct pci_dev *pdev, uint32_t state)
 {

drivers/net/pcmcia/nmclan_cs.c

@@ -1671,7 +1671,7 @@ static void set_multicast_list(struct net_device *dev)
 
 static struct pcmcia_device_id nmclan_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("New Media Corporation", "Ethernet", 0x085a850b, 0x00b2e941),
-	PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet", 0x0ebf1d60, 0x00b2e941),
+	PCMCIA_DEVICE_PROD_ID12("Portable Add-ons", "Ethernet+", 0xebf1d60, 0xad673aaf),
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, nmclan_ids);

drivers/net/pcmcia/pcnet_cs.c

@@ -1639,7 +1639,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0143, 0xc0ab),
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x021b, 0x0101),
 	PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x08a1, 0xc0ab),
-	PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet ", 0x578ba6e7, 0x02d92d1e),
+	PCMCIA_PFC_DEVICE_PROD_ID12(0, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
@@ -1683,7 +1683,6 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2212", 0xdfc6b5b2, 0xcb112a11),
 	PCMCIA_DEVICE_PROD_ID12("ACCTON", "EN2216-PCMCIA-ETHERNET", 0xdfc6b5b2, 0x5542bfff),
 	PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA100-PCM-T V2 100/10M LAN PC Card", 0xbb7fbdd7, 0xcd91cc68),
-	PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM", 0xbb7fbdd7, 0x5ba10d49),
 	PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA100-PCM V2", 0x36634a66, 0xc6d05997),
   	PCMCIA_DEVICE_PROD_ID12("Allied Telesis, K.K.", "CentreCOM LA-PCM_V2", 0xbb7fBdd7, 0x28e299f8),
 	PCMCIA_DEVICE_PROD_ID12("Allied Telesis K.K.", "LA-PCM V3", 0x36634a66, 0x62241d96),
@@ -1719,6 +1718,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("DIGITAL", "DEPCM-XX", 0x69616cb3, 0xe600e76e),
 	PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-650", 0x1a424a1c, 0xf28c8398),
 	PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660", 0x1a424a1c, 0xd9a1d05b),
+	PCMCIA_DEVICE_PROD_ID12("D-Link", "DE-660+", 0x1a424a1c, 0x50dcd0ec),
 	PCMCIA_DEVICE_PROD_ID12("D-Link", "DFE-650", 0x1a424a1c, 0x0f0073f9),
 	PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 PC Card", 0x725b842d, 0xf1efee84),
 	PCMCIA_DEVICE_PROD_ID12("Dual Speed", "10/100 Port Attached PC Card", 0x725b842d, 0x2db1f8e9),
@@ -1737,6 +1737,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("GVC", "NIC-2000p", 0x76e171bd, 0x6eb1c947),
 	PCMCIA_DEVICE_PROD_ID12("IBM Corp.", "Ethernet", 0xe3736c88, 0x00b2e941),
 	PCMCIA_DEVICE_PROD_ID12("IC-CARD", "IC-CARD", 0x60cb09a6, 0x60cb09a6),
+	PCMCIA_DEVICE_PROD_ID12("IC-CARD+", "IC-CARD+", 0x93693494, 0x93693494),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCETTX", 0x547e66dc, 0x6fc5459b),
 	PCMCIA_DEVICE_PROD_ID12("iPort", "10/100 Ethernet Card", 0x56c538d2, 0x11b0ffc0),
 	PCMCIA_DEVICE_PROD_ID12("KANSAI ELECTRIC CO.,LTD", "KLA-PCM/T", 0xb18dc3b4, 0xcc51a956),
@@ -1753,7 +1754,7 @@ static struct pcmcia_device_id pcnet_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 Integrated PC Card (PCM100)", 0x0733cc81, 0x453c3f9d),
 	PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100)", 0x0733cc81, 0x66c5a389),
 	PCMCIA_DEVICE_PROD_ID12("Linksys", "EtherFast 10/100 PC Card (PCMPC100 V2)", 0x0733cc81, 0x3a3b28e9),
-	PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline ", 0x0733cc81, 0x5e07cfa0),
+	PCMCIA_DEVICE_PROD_ID12("Linksys", "HomeLink Phoneline + 10/100 Network PC Card (PCM100H1)", 0x733cc81, 0x7a3e5c3a),
 	PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN100TX", 0x88fcdeda, 0x6d772737),
 	PCMCIA_DEVICE_PROD_ID12("Logitec", "LPM-LN20T", 0x88fcdeda, 0x81090922),
 	PCMCIA_DEVICE_PROD_ID12("LONGSHINE", "PCMCIA Ethernet Card", 0xf866b0b0, 0x6f6652e0),

drivers/net/pcmcia/smc91c92_cs.c

@@ -2332,8 +2332,8 @@ static struct pcmcia_device_id smc91c92_ids[] = {
 	PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
 	PCMCIA_PFC_DEVICE_PROD_ID12(0, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
-	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
-	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
+	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
+	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
 	PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x016c, 0x0020),
 	PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0023),
 	PCMCIA_DEVICE_PROD_ID123("BASICS by New Media Corporation", "Ethernet", "SMC91C94", 0x23c78a9d, 0x00b2e941, 0xcef397fb),
@@ -2343,8 +2343,8 @@ static struct pcmcia_device_id smc91c92_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("Farallon", "Farallon Enet", 0x58d93fc4, 0x244734e9),
 	PCMCIA_DEVICE_PROD_ID12("Megahertz", "CC10BT/2", 0x33234748, 0x3c95b953),
 	PCMCIA_DEVICE_PROD_ID12("MELCO/SMC", "LPC-TX", 0xa2cd8e6d, 0x42da662a),
-	PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
-	PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard", 0x0c2f80cd, 0x0573c29f),
+	PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Four of Diamonds Ethernet", 0xc2f80cd, 0xb3466314),
+	PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Seven of Diamonds Ethernet", 0xc2f80cd, 0x194b650a),
 	PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast Ethernet PCCard", 0x281f1c5d, 0xdcea68bc),
 	PCMCIA_DEVICE_PROD_ID12("Psion", "10Mb Ethernet", 0x4ef00b21, 0x844be9e9),
 	PCMCIA_DEVICE_PROD_ID12("SMC", "EtherEZ Ethernet 8020", 0xc4f8b18b, 0x4a0eeb2d),

drivers/net/pcmcia/xirc2ps_cs.c

@@ -1985,7 +1985,7 @@ static struct pcmcia_device_id xirc2ps_ids[] = {
 	PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
 	PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
 	PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
-	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet", 0x2e3ee845, 0xc0e778c2),
+	PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
 	PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a),
 	PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2),
 	PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37),

drivers/net/wireless/orinoco_cs.c

@@ -621,8 +621,6 @@ static struct pcmcia_device_id orinoco_cs_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021),
 	PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002),
 	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
-	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
-	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
 	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
 	PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
 	PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),