Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac

Pull EDAC fixes and ghes-edac from Mauro Carvalho Chehab:
 "For:

   - Some fixes at edac drivers (i7core_edac, sb_edac, i3200_edac);
   - error injection support for i5100, when EDAC debug is enabled;
   - fix edac when it is loaded builtin (early init for the subsystem);
   - a "Firmware First" EDAC driver, allowing ghes to report errors via
     EDAC (ghes-edac).

  With regards to ghes-edac, this fixes a longstanding BZ at Red Hat
  that happens with Nehalem and Sandy Bridge CPUs: when both GHES and
  i7core_edac or sb_edac are running, the error reports are
  unpredictable, as both BIOS and OS race to access the registers.  With
  ghes-edac, the EDAC core will refuse to register any other concurrent
  memory error driver.

  This patchset moves the ghes struct definitions to a separate header
  file (include/acpi/ghes.h) and adds 3 hooks at apei/ghes.c to
  register/unregister and to report errors via ghes-edac.  Those changes
  were acked by ghes driver maintainer (Huang)."

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (30 commits)
  i5100_edac: convert to use simple_open()
  ghes_edac: fix to use list_for_each_entry_safe() when delete list items
  ghes_edac: Fix RAS tracing
  ghes_edac: Make it compliant with UEFI spec 2.3.1
  ghes_edac: Improve driver's printk messages
  ghes_edac: Don't credit the same memory dimm twice
  ghes_edac: do a better job of filling EDAC DIMM info
  ghes_edac: add support for reporting errors via EDAC
  ghes_edac: Register at EDAC core the BIOS report
  ghes: add the needed hooks for EDAC error report
  ghes: move structures/enum to a header file
  edac: add support for error type "Info"
  edac: add support for raw error reports
  edac: reduce stack pressure by using a pre-allocated buffer
  edac: lock module owner to avoid error report conflicts
  edac: remove proc_name from mci structure
  edac: add a new memory layer type
  edac: initialize the core earlier
  edac: better report error conditions in debug mode
  i5100_edac: Remove two checkpatch warnings
  ...

MAINTAINERS

@@ -2904,6 +2904,13 @@ W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/e7xxx_edac.c
 
+EDAC-GHES
+M:	Mauro Carvalho Chehab <mchehab@redhat.com>
+L:	linux-edac@vger.kernel.org
+W:	bluesmoke.sourceforge.net
+S:	Maintained
+F:	drivers/edac/ghes-edac.c
+
 EDAC-I82443BXGX
 M:	Tim Small <tim@buttersideup.com>
 L:	linux-edac@vger.kernel.org

drivers/acpi/apei/ghes.c

@@ -48,8 +48,8 @@
 #include <linux/genalloc.h>
 #include <linux/pci.h>
 #include <linux/aer.h>
-#include <acpi/apei.h>
-#include <acpi/hed.h>
+
+#include <acpi/ghes.h>
 #include <asm/mce.h>
 #include <asm/tlbflush.h>
 #include <asm/nmi.h>
@@ -84,42 +84,6 @@
 	((struct acpi_hest_generic_status *)				\
 	 ((struct ghes_estatus_node *)(estatus_node) + 1))
 
-/*
- * One struct ghes is created for each generic hardware error source.
- * It provides the context for APEI hardware error timer/IRQ/SCI/NMI
- * handler.
- *
- * estatus: memory buffer for error status block, allocated during
- * HEST parsing.
- */
-#define GHES_TO_CLEAR		0x0001
-#define GHES_EXITING		0x0002
-
-struct ghes {
-	struct acpi_hest_generic *generic;
-	struct acpi_hest_generic_status *estatus;
-	u64 buffer_paddr;
-	unsigned long flags;
-	union {
-		struct list_head list;
-		struct timer_list timer;
-		unsigned int irq;
-	};
-};
-
-struct ghes_estatus_node {
-	struct llist_node llnode;
-	struct acpi_hest_generic *generic;
-};
-
-struct ghes_estatus_cache {
-	u32 estatus_len;
-	atomic_t count;
-	struct acpi_hest_generic *generic;
-	unsigned long long time_in;
-	struct rcu_head rcu;
-};
-
 bool ghes_disable;
 module_param_named(disable, ghes_disable, bool, 0);
 
@@ -333,13 +297,6 @@ static void ghes_fini(struct ghes *ghes)
 	apei_unmap_generic_address(&ghes->generic->error_status_address);
 }
 
-enum {
-	GHES_SEV_NO = 0x0,
-	GHES_SEV_CORRECTED = 0x1,
-	GHES_SEV_RECOVERABLE = 0x2,
-	GHES_SEV_PANIC = 0x3,
-};
-
 static inline int ghes_severity(int severity)
 {
 	switch (severity) {
@@ -452,7 +409,8 @@ static void ghes_clear_estatus(struct ghes *ghes)
 	ghes->flags &= ~GHES_TO_CLEAR;
 }
 
-static void ghes_do_proc(const struct acpi_hest_generic_status *estatus)
+static void ghes_do_proc(struct ghes *ghes,
+			 const struct acpi_hest_generic_status *estatus)
 {
 	int sev, sec_sev;
 	struct acpi_hest_generic_data *gdata;
@@ -464,6 +422,8 @@ static void ghes_do_proc(const struct acpi_hest_generic_status *estatus)
 				 CPER_SEC_PLATFORM_MEM)) {
 			struct cper_sec_mem_err *mem_err;
 			mem_err = (struct cper_sec_mem_err *)(gdata+1);
+			ghes_edac_report_mem_error(ghes, sev, mem_err);
+
 #ifdef CONFIG_X86_MCE
 			apei_mce_report_mem_error(sev == GHES_SEV_CORRECTED,
 						  mem_err);
@@ -682,7 +642,7 @@ static int ghes_proc(struct ghes *ghes)
 		if (ghes_print_estatus(NULL, ghes->generic, ghes->estatus))
 			ghes_estatus_cache_add(ghes->generic, ghes->estatus);
 	}
-	ghes_do_proc(ghes->estatus);
+	ghes_do_proc(ghes, ghes->estatus);
 out:
 	ghes_clear_estatus(ghes);
 	return 0;
@@ -775,7 +735,7 @@ static void ghes_proc_in_irq(struct irq_work *irq_work)
 		estatus = GHES_ESTATUS_FROM_NODE(estatus_node);
 		len = apei_estatus_len(estatus);
 		node_len = GHES_ESTATUS_NODE_LEN(len);
-		ghes_do_proc(estatus);
+		ghes_do_proc(estatus_node->ghes, estatus);
 		if (!ghes_estatus_cached(estatus)) {
 			generic = estatus_node->generic;
 			if (ghes_print_estatus(NULL, generic, estatus))
@@ -864,6 +824,7 @@ static int ghes_notify_nmi(unsigned int cmd, struct pt_regs *regs)
 		estatus_node = (void *)gen_pool_alloc(ghes_estatus_pool,
 						      node_len);
 		if (estatus_node) {
+			estatus_node->ghes = ghes;
 			estatus_node->generic = ghes->generic;
 			estatus = GHES_ESTATUS_FROM_NODE(estatus_node);
 			memcpy(estatus, ghes->estatus, len);
@@ -942,6 +903,11 @@ static int ghes_probe(struct platform_device *ghes_dev)
 		ghes = NULL;
 		goto err;
 	}
+
+	rc = ghes_edac_register(ghes, &ghes_dev->dev);
+	if (rc < 0)
+		goto err;
+
 	switch (generic->notify.type) {
 	case ACPI_HEST_NOTIFY_POLLED:
 		ghes->timer.function = ghes_poll_func;
@@ -954,13 +920,13 @@ static int ghes_probe(struct platform_device *ghes_dev)
 		if (acpi_gsi_to_irq(generic->notify.vector, &ghes->irq)) {
 			pr_err(GHES_PFX "Failed to map GSI to IRQ for generic hardware error source: %d\n",
 			       generic->header.source_id);
-			goto err;
+			goto err_edac_unreg;
 		}
 		if (request_irq(ghes->irq, ghes_irq_func,
 				0, "GHES IRQ", ghes)) {
 			pr_err(GHES_PFX "Failed to register IRQ for generic hardware error source: %d\n",
 			       generic->header.source_id);
-			goto err;
+			goto err_edac_unreg;
 		}
 		break;
 	case ACPI_HEST_NOTIFY_SCI:
@@ -986,6 +952,8 @@ static int ghes_probe(struct platform_device *ghes_dev)
 	platform_set_drvdata(ghes_dev, ghes);
 
 	return 0;
+err_edac_unreg:
+	ghes_edac_unregister(ghes);
 err:
 	if (ghes) {
 		ghes_fini(ghes);
@@ -1038,6 +1006,9 @@ static int ghes_remove(struct platform_device *ghes_dev)
 	}
 
 	ghes_fini(ghes);
+
+	ghes_edac_unregister(ghes);
+
 	kfree(ghes);
 
 	platform_set_drvdata(ghes_dev, NULL);

drivers/edac/Kconfig

@@ -80,6 +80,29 @@ config EDAC_MM_EDAC
 	  occurred so that a particular failing memory module can be
 	  replaced.  If unsure, select 'Y'.
 
+config EDAC_GHES
+	bool "Output ACPI APEI/GHES BIOS detected errors via EDAC"
+	depends on ACPI_APEI_GHES && (EDAC_MM_EDAC=y)
+	default y
+	help
+	  Not all machines support hardware-driven error report. Some of those
+	  provide a BIOS-driven error report mechanism via ACPI, using the
+	  APEI/GHES driver. By enabling this option, the error reports provided
+	  by GHES are sent to userspace via the EDAC API.
+
+	  When this option is enabled, it will disable the hardware-driven
+	  mechanisms, if a GHES BIOS is detected, entering into the
+	  "Firmware First" mode.
+
+	  It should be noticed that keeping both GHES and a hardware-driven
+	  error mechanism won't work well, as BIOS will race with OS, while
+	  reading the error registers. So, if you want to not use "Firmware
+	  first" GHES error mechanism, you should disable GHES either at
+	  compilation time or by passing "ghes.disable=1" Kernel parameter
+	  at boot time.
+
+	  In doubt, say 'Y'.
+
 config EDAC_AMD64
 	tristate "AMD64 (Opteron, Athlon64) K8, F10h"
 	depends on EDAC_MM_EDAC && AMD_NB && X86_64 && EDAC_DECODE_MCE

drivers/edac/Makefile

@@ -16,6 +16,7 @@ ifdef CONFIG_PCI
 edac_core-y	+= edac_pci.o edac_pci_sysfs.o
 endif
 
+obj-$(CONFIG_EDAC_GHES)			+= ghes_edac.o
 obj-$(CONFIG_EDAC_MCE_INJ)		+= mce_amd_inj.o
 
 edac_mce_amd-y				:= mce_amd.o

drivers/edac/edac_core.h

@@ -453,6 +453,11 @@ extern struct mem_ctl_info *find_mci_by_dev(struct device *dev);
 extern struct mem_ctl_info *edac_mc_del_mc(struct device *dev);
 extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci,
 				      unsigned long page);
+
+void edac_raw_mc_handle_error(const enum hw_event_mc_err_type type,
+			      struct mem_ctl_info *mci,
+			      struct edac_raw_error_desc *e);
+
 void edac_mc_handle_error(const enum hw_event_mc_err_type type,
 			  struct mem_ctl_info *mci,
 			  const u16 error_count,

drivers/edac/edac_mc.c

@@ -42,6 +42,12 @@
 static DEFINE_MUTEX(mem_ctls_mutex);
 static LIST_HEAD(mc_devices);
 
+/*
+ * Used to lock EDAC MC to just one module, avoiding two drivers e. g.
+ *	apei/ghes and i7core_edac to be used at the same time.
+ */
+static void const *edac_mc_owner;
+
 unsigned edac_dimm_info_location(struct dimm_info *dimm, char *buf,
 			         unsigned len)
 {
@@ -441,13 +447,6 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num,
 
 	mci->op_state = OP_ALLOC;
 
-	/* at this point, the root kobj is valid, and in order to
-	 * 'free' the object, then the function:
-	 *      edac_mc_unregister_sysfs_main_kobj() must be called
-	 * which will perform kobj unregistration and the actual free
-	 * will occur during the kobject callback operation
-	 */
-
 	return mci;
 
 error:
@@ -666,9 +665,9 @@ fail1:
 	return 1;
 }
 
-static void del_mc_from_global_list(struct mem_ctl_info *mci)
+static int del_mc_from_global_list(struct mem_ctl_info *mci)
 {
-	atomic_dec(&edac_handlers);
+	int handlers = atomic_dec_return(&edac_handlers);
 	list_del_rcu(&mci->link);
 
 	/* these are for safe removal of devices from global list while
@@ -676,6 +675,8 @@ static void del_mc_from_global_list(struct mem_ctl_info *mci)
 	 */
 	synchronize_rcu();
 	INIT_LIST_HEAD(&mci->link);
+
+	return handlers;
 }
 
 /**
@@ -719,6 +720,7 @@ EXPORT_SYMBOL(edac_mc_find);
 /* FIXME - should a warning be printed if no error detection? correction? */
 int edac_mc_add_mc(struct mem_ctl_info *mci)
 {
+	int ret = -EINVAL;
 	edac_dbg(0, "\n");
 
 #ifdef CONFIG_EDAC_DEBUG
@@ -749,6 +751,11 @@ int edac_mc_add_mc(struct mem_ctl_info *mci)
 #endif
 	mutex_lock(&mem_ctls_mutex);
 
+	if (edac_mc_owner && edac_mc_owner != mci->mod_name) {
+		ret = -EPERM;
+		goto fail0;
+	}
+
 	if (add_mc_to_global_list(mci))
 		goto fail0;
 
@@ -775,6 +782,8 @@ int edac_mc_add_mc(struct mem_ctl_info *mci)
 	edac_mc_printk(mci, KERN_INFO, "Giving out device to '%s' '%s':"
 		" DEV %s\n", mci->mod_name, mci->ctl_name, edac_dev_name(mci));
 
+	edac_mc_owner = mci->mod_name;
+
 	mutex_unlock(&mem_ctls_mutex);
 	return 0;
 
@@ -783,7 +792,7 @@ fail1:
 
 fail0:
 	mutex_unlock(&mem_ctls_mutex);
-	return 1;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(edac_mc_add_mc);
 
@@ -809,7 +818,8 @@ struct mem_ctl_info *edac_mc_del_mc(struct device *dev)
 		return NULL;
 	}
 
-	del_mc_from_global_list(mci);
+	if (!del_mc_from_global_list(mci))
+		edac_mc_owner = NULL;
 	mutex_unlock(&mem_ctls_mutex);
 
 	/* flush workq processes */
@@ -907,6 +917,7 @@ const char *edac_layer_name[] = {
 	[EDAC_MC_LAYER_CHANNEL] = "channel",
 	[EDAC_MC_LAYER_SLOT] = "slot",
 	[EDAC_MC_LAYER_CHIP_SELECT] = "csrow",
+	[EDAC_MC_LAYER_ALL_MEM] = "memory",
 };
 EXPORT_SYMBOL_GPL(edac_layer_name);
 
@@ -1054,7 +1065,46 @@ static void edac_ue_error(struct mem_ctl_info *mci,
 	edac_inc_ue_error(mci, enable_per_layer_report, pos, error_count);
 }
 
-#define OTHER_LABEL " or "
+/**
+ * edac_raw_mc_handle_error - reports a memory event to userspace without doing
+ *			      anything to discover the error location
+ *
+ * @type:		severity of the error (CE/UE/Fatal)
+ * @mci:		a struct mem_ctl_info pointer
+ * @e:			error description
+ *
+ * This raw function is used internally by edac_mc_handle_error(). It should
+ * only be called directly when the hardware error come directly from BIOS,
+ * like in the case of APEI GHES driver.
+ */
+void edac_raw_mc_handle_error(const enum hw_event_mc_err_type type,
+			      struct mem_ctl_info *mci,
+			      struct edac_raw_error_desc *e)
+{
+	char detail[80];
+	int pos[EDAC_MAX_LAYERS] = { e->top_layer, e->mid_layer, e->low_layer };
+
+	/* Memory type dependent details about the error */
+	if (type == HW_EVENT_ERR_CORRECTED) {
+		snprintf(detail, sizeof(detail),
+			"page:0x%lx offset:0x%lx grain:%ld syndrome:0x%lx",
+			e->page_frame_number, e->offset_in_page,
+			e->grain, e->syndrome);
+		edac_ce_error(mci, e->error_count, pos, e->msg, e->location, e->label,
+			      detail, e->other_detail, e->enable_per_layer_report,
+			      e->page_frame_number, e->offset_in_page, e->grain);
+	} else {
+		snprintf(detail, sizeof(detail),
+			"page:0x%lx offset:0x%lx grain:%ld",
+			e->page_frame_number, e->offset_in_page, e->grain);
+
+		edac_ue_error(mci, e->error_count, pos, e->msg, e->location, e->label,
+			      detail, e->other_detail, e->enable_per_layer_report);
+	}
+
+
+}
+EXPORT_SYMBOL_GPL(edac_raw_mc_handle_error);
 
 /**
  * edac_mc_handle_error - reports a memory event to userspace
@@ -1086,19 +1136,27 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type,
 			  const char *msg,
 			  const char *other_detail)
 {
-	/* FIXME: too much for stack: move it to some pre-alocated area */
-	char detail[80], location[80];
-	char label[(EDAC_MC_LABEL_LEN + 1 + sizeof(OTHER_LABEL)) * mci->tot_dimms];
 	char *p;
 	int row = -1, chan = -1;
 	int pos[EDAC_MAX_LAYERS] = { top_layer, mid_layer, low_layer };
-	int i;
-	long grain;
-	bool enable_per_layer_report = false;
+	int i, n_labels = 0;
 	u8 grain_bits;
+	struct edac_raw_error_desc *e = &mci->error_desc;
 
 	edac_dbg(3, "MC%d\n", mci->mc_idx);
 
+	/* Fills the error report buffer */
+	memset(e, 0, sizeof (*e));
+	e->error_count = error_count;
+	e->top_layer = top_layer;
+	e->mid_layer = mid_layer;
+	e->low_layer = low_layer;
+	e->page_frame_number = page_frame_number;
+	e->offset_in_page = offset_in_page;
+	e->syndrome = syndrome;
+	e->msg = msg;
+	e->other_detail = other_detail;
+
 	/*
 	 * Check if the event report is consistent and if the memory
 	 * location is known. If it is known, enable_per_layer_report will be
@@ -1121,7 +1179,7 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type,
 			pos[i] = -1;
 		}
 		if (pos[i] >= 0)
-			enable_per_layer_report = true;
+			e->enable_per_layer_report = true;
 	}
 
 	/*
@@ -1135,8 +1193,7 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type,
 	 * where each memory belongs to a separate channel within the same
 	 * branch.
 	 */
-	grain = 0;
-	p = label;
+	p = e->label;
 	*p = '\0';
 
 	for (i = 0; i < mci->tot_dimms; i++) {
@@ -1150,8 +1207,8 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type,
 			continue;
 
 		/* get the max grain, over the error match range */
-		if (dimm->grain > grain)
-			grain = dimm->grain;
+		if (dimm->grain > e->grain)
+			e->grain = dimm->grain;
 
 		/*
 		 * If the error is memory-controller wide, there's no need to
@@ -1159,8 +1216,13 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type,
 		 * channel/memory controller/...  may be affected.
 		 * Also, don't show errors for empty DIMM slots.
 		 */
-		if (enable_per_layer_report && dimm->nr_pages) {
-			if (p != label) {
+		if (e->enable_per_layer_report && dimm->nr_pages) {
+			if (n_labels >= EDAC_MAX_LABELS) {
+				e->enable_per_layer_report = false;
+				break;
+			}
+			n_labels++;
+			if (p != e->label) {
 				strcpy(p, OTHER_LABEL);
 				p += strlen(OTHER_LABEL);
 			}
@@ -1187,12 +1249,12 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type,
 		}
 	}
 
-	if (!enable_per_layer_report) {
-		strcpy(label, "any memory");
+	if (!e->enable_per_layer_report) {
+		strcpy(e->label, "any memory");
 	} else {
 		edac_dbg(4, "csrow/channel to increment: (%d,%d)\n", row, chan);
-		if (p == label)
-			strcpy(label, "unknown memory");
+		if (p == e->label)
+			strcpy(e->label, "unknown memory");
 		if (type == HW_EVENT_ERR_CORRECTED) {
 			if (row >= 0) {
 				mci->csrows[row]->ce_count += error_count;
@@ -1205,7 +1267,7 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type,
 	}
 
 	/* Fill the RAM location data */
-	p = location;
+	p = e->location;
 
 	for (i = 0; i < mci->n_layers; i++) {
 		if (pos[i] < 0)
@@ -1215,32 +1277,16 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type,
 			     edac_layer_name[mci->layers[i].type],
 			     pos[i]);
 	}
-	if (p > location)
+	if (p > e->location)
 		*(p - 1) = '\0';
 
 	/* Report the error via the trace interface */
-	grain_bits = fls_long(grain) + 1;
-	trace_mc_event(type, msg, label, error_count,
-		       mci->mc_idx, top_layer, mid_layer, low_layer,
-		       PAGES_TO_MiB(page_frame_number) | offset_in_page,
-		       grain_bits, syndrome, other_detail);
+	grain_bits = fls_long(e->grain) + 1;
+	trace_mc_event(type, e->msg, e->label, e->error_count,
+		       mci->mc_idx, e->top_layer, e->mid_layer, e->low_layer,
+		       PAGES_TO_MiB(e->page_frame_number) | e->offset_in_page,
+		       grain_bits, e->syndrome, e->other_detail);
 
-	/* Memory type dependent details about the error */
-	if (type == HW_EVENT_ERR_CORRECTED) {
-		snprintf(detail, sizeof(detail),
-			"page:0x%lx offset:0x%lx grain:%ld syndrome:0x%lx",
-			page_frame_number, offset_in_page,
-			grain, syndrome);
-		edac_ce_error(mci, error_count, pos, msg, location, label,
-			      detail, other_detail, enable_per_layer_report,
-			      page_frame_number, offset_in_page, grain);
-	} else {
-		snprintf(detail, sizeof(detail),
-			"page:0x%lx offset:0x%lx grain:%ld",
-			page_frame_number, offset_in_page, grain);
-
-		edac_ue_error(mci, error_count, pos, msg, location, label,
-			      detail, other_detail, enable_per_layer_report);
-	}
+	edac_raw_mc_handle_error(type, mci, e);
 }
 EXPORT_SYMBOL_GPL(edac_mc_handle_error);

drivers/edac/edac_mc_sysfs.c

@@ -7,7 +7,7 @@
  *
  * Written Doug Thompson <norsk5@xmission.com> www.softwarebitmaker.com
  *
- * (c) 2012 - Mauro Carvalho Chehab <mchehab@redhat.com>
+ * (c) 2012-2013 - Mauro Carvalho Chehab <mchehab@redhat.com>
  *	The entire API were re-written, and ported to use struct device
  *
  */
@@ -429,8 +429,12 @@ static int edac_create_csrow_objects(struct mem_ctl_info *mci)
 		if (!nr_pages_per_csrow(csrow))
 			continue;
 		err = edac_create_csrow_object(mci, mci->csrows[i], i);
-		if (err < 0)
+		if (err < 0) {
+			edac_dbg(1,
+				 "failure: create csrow objects for csrow %d\n",
+				 i);
 			goto error;
+		}
 	}
 	return 0;
 
@@ -677,9 +681,6 @@ static ssize_t mci_sdram_scrub_rate_store(struct device *dev,
 	unsigned long bandwidth = 0;
 	int new_bw = 0;
 
-	if (!mci->set_sdram_scrub_rate)
-		return -ENODEV;
-
 	if (strict_strtoul(data, 10, &bandwidth) < 0)
 		return -EINVAL;
 
@@ -703,9 +704,6 @@ static ssize_t mci_sdram_scrub_rate_show(struct device *dev,
 	struct mem_ctl_info *mci = to_mci(dev);
 	int bandwidth = 0;
 
-	if (!mci->get_sdram_scrub_rate)
-		return -ENODEV;
-
 	bandwidth = mci->get_sdram_scrub_rate(mci);
 	if (bandwidth < 0) {
 		edac_printk(KERN_DEBUG, EDAC_MC, "Error reading scrub rate\n");
@@ -866,8 +864,7 @@ DEVICE_ATTR(ce_count, S_IRUGO, mci_ce_count_show, NULL);
 DEVICE_ATTR(max_location, S_IRUGO, mci_max_location_show, NULL);
 
 /* memory scrubber attribute file */
-DEVICE_ATTR(sdram_scrub_rate, S_IRUGO | S_IWUSR, mci_sdram_scrub_rate_show,
-	mci_sdram_scrub_rate_store);
+DEVICE_ATTR(sdram_scrub_rate, 0, NULL, NULL);
 
 static struct attribute *mci_attrs[] = {
 	&dev_attr_reset_counters.attr,
@@ -878,7 +875,6 @@ static struct attribute *mci_attrs[] = {
 	&dev_attr_ce_noinfo_count.attr,
 	&dev_attr_ue_count.attr,
 	&dev_attr_ce_count.attr,
-	&dev_attr_sdram_scrub_rate.attr,
 	&dev_attr_max_location.attr,
 	NULL
 };
@@ -1007,11 +1003,28 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci)
 	edac_dbg(0, "creating device %s\n", dev_name(&mci->dev));
 	err = device_add(&mci->dev);
 	if (err < 0) {
+		edac_dbg(1, "failure: create device %s\n", dev_name(&mci->dev));
 		bus_unregister(&mci->bus);
 		kfree(mci->bus.name);
 		return err;
 	}
 
+	if (mci->set_sdram_scrub_rate || mci->get_sdram_scrub_rate) {
+		if (mci->get_sdram_scrub_rate) {
+			dev_attr_sdram_scrub_rate.attr.mode |= S_IRUGO;
+			dev_attr_sdram_scrub_rate.show = &mci_sdram_scrub_rate_show;
+		}
+		if (mci->set_sdram_scrub_rate) {
+			dev_attr_sdram_scrub_rate.attr.mode |= S_IWUSR;
+			dev_attr_sdram_scrub_rate.store = &mci_sdram_scrub_rate_store;
+		}
+		err = device_create_file(&mci->dev,
+					 &dev_attr_sdram_scrub_rate);
+		if (err) {
+			edac_dbg(1, "failure: create sdram_scrub_rate\n");
+			goto fail2;
+		}
+	}
 	/*
 	 * Create the dimm/rank devices
 	 */
@@ -1056,6 +1069,7 @@ fail:
 			continue;
 		device_unregister(&dimm->dev);
 	}
+fail2:
 	device_unregister(&mci->dev);
 	bus_unregister(&mci->bus);
 	kfree(mci->bus.name);

drivers/edac/edac_module.c

@@ -146,7 +146,7 @@ static void __exit edac_exit(void)
 /*
  * Inform the kernel of our entry and exit points
  */
-module_init(edac_init);
+subsys_initcall(edac_init);
 module_exit(edac_exit);
 
 MODULE_LICENSE("GPL");

drivers/edac/edac_pci_sysfs.c

@@ -429,8 +429,8 @@ static void edac_pci_main_kobj_teardown(void)
 	if (atomic_dec_return(&edac_pci_sysfs_refcount) == 0) {
 		edac_dbg(0, "called kobject_put on main kobj\n");
 		kobject_put(edac_pci_top_main_kobj);
+		edac_put_sysfs_subsys();
 	}
-	edac_put_sysfs_subsys();
 }
 
 /*

drivers/edac/ghes_edac.c

@@ -0,0 +1,537 @@
+/*
+ * GHES/EDAC Linux driver
+ *
+ * This file may be distributed under the terms of the GNU General Public
+ * License version 2.
+ *
+ * Copyright (c) 2013 by Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <acpi/ghes.h>
+#include <linux/edac.h>
+#include <linux/dmi.h>
+#include "edac_core.h"
+#include <ras/ras_event.h>
+
+#define GHES_EDAC_REVISION " Ver: 1.0.0"
+
+struct ghes_edac_pvt {
+	struct list_head list;
+	struct ghes *ghes;
+	struct mem_ctl_info *mci;
+
+	/* Buffers for the error handling routine */
+	char detail_location[240];
+	char other_detail[160];
+	char msg[80];
+};
+
+static LIST_HEAD(ghes_reglist);
+static DEFINE_MUTEX(ghes_edac_lock);
+static int ghes_edac_mc_num;
+
+
+/* Memory Device - Type 17 of SMBIOS spec */
+struct memdev_dmi_entry {
+	u8 type;
+	u8 length;
+	u16 handle;
+	u16 phys_mem_array_handle;
+	u16 mem_err_info_handle;
+	u16 total_width;
+	u16 data_width;
+	u16 size;
+	u8 form_factor;
+	u8 device_set;
+	u8 device_locator;
+	u8 bank_locator;
+	u8 memory_type;
+	u16 type_detail;
+	u16 speed;
+	u8 manufacturer;
+	u8 serial_number;
+	u8 asset_tag;
+	u8 part_number;
+	u8 attributes;
+	u32 extended_size;
+	u16 conf_mem_clk_speed;
+} __attribute__((__packed__));
+
+struct ghes_edac_dimm_fill {
+	struct mem_ctl_info *mci;
+	unsigned count;
+};
+
+char *memory_type[] = {
+	[MEM_EMPTY] = "EMPTY",
+	[MEM_RESERVED] = "RESERVED",
+	[MEM_UNKNOWN] = "UNKNOWN",
+	[MEM_FPM] = "FPM",
+	[MEM_EDO] = "EDO",
+	[MEM_BEDO] = "BEDO",
+	[MEM_SDR] = "SDR",
+	[MEM_RDR] = "RDR",
+	[MEM_DDR] = "DDR",
+	[MEM_RDDR] = "RDDR",
+	[MEM_RMBS] = "RMBS",
+	[MEM_DDR2] = "DDR2",
+	[MEM_FB_DDR2] = "FB_DDR2",
+	[MEM_RDDR2] = "RDDR2",
+	[MEM_XDR] = "XDR",
+	[MEM_DDR3] = "DDR3",
+	[MEM_RDDR3] = "RDDR3",
+};
+
+static void ghes_edac_count_dimms(const struct dmi_header *dh, void *arg)
+{
+	int *num_dimm = arg;
+
+	if (dh->type == DMI_ENTRY_MEM_DEVICE)
+		(*num_dimm)++;
+}
+
+static void ghes_edac_dmidecode(const struct dmi_header *dh, void *arg)
+{
+	struct ghes_edac_dimm_fill *dimm_fill = arg;
+	struct mem_ctl_info *mci = dimm_fill->mci;
+
+	if (dh->type == DMI_ENTRY_MEM_DEVICE) {
+		struct memdev_dmi_entry *entry = (struct memdev_dmi_entry *)dh;
+		struct dimm_info *dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+						       mci->n_layers,
+						       dimm_fill->count, 0, 0);
+
+		if (entry->size == 0xffff) {
+			pr_info("Can't get DIMM%i size\n",
+				dimm_fill->count);
+			dimm->nr_pages = MiB_TO_PAGES(32);/* Unknown */
+		} else if (entry->size == 0x7fff) {
+			dimm->nr_pages = MiB_TO_PAGES(entry->extended_size);
+		} else {
+			if (entry->size & 1 << 15)
+				dimm->nr_pages = MiB_TO_PAGES((entry->size &
+							       0x7fff) << 10);
+			else
+				dimm->nr_pages = MiB_TO_PAGES(entry->size);
+		}
+
+		switch (entry->memory_type) {
+		case 0x12:
+			if (entry->type_detail & 1 << 13)
+				dimm->mtype = MEM_RDDR;
+			else
+				dimm->mtype = MEM_DDR;
+			break;
+		case 0x13:
+			if (entry->type_detail & 1 << 13)
+				dimm->mtype = MEM_RDDR2;
+			else
+				dimm->mtype = MEM_DDR2;
+			break;
+		case 0x14:
+			dimm->mtype = MEM_FB_DDR2;
+			break;
+		case 0x18:
+			if (entry->type_detail & 1 << 13)
+				dimm->mtype = MEM_RDDR3;
+			else
+				dimm->mtype = MEM_DDR3;
+			break;
+		default:
+			if (entry->type_detail & 1 << 6)
+				dimm->mtype = MEM_RMBS;
+			else if ((entry->type_detail & ((1 << 7) | (1 << 13)))
+				 == ((1 << 7) | (1 << 13)))
+				dimm->mtype = MEM_RDR;
+			else if (entry->type_detail & 1 << 7)
+				dimm->mtype = MEM_SDR;
+			else if (entry->type_detail & 1 << 9)
+				dimm->mtype = MEM_EDO;
+			else
+				dimm->mtype = MEM_UNKNOWN;
+		}
+
+		/*
+		 * Actually, we can only detect if the memory has bits for
+		 * checksum or not
+		 */
+		if (entry->total_width == entry->data_width)
+			dimm->edac_mode = EDAC_NONE;
+		else
+			dimm->edac_mode = EDAC_SECDED;
+
+		dimm->dtype = DEV_UNKNOWN;
+		dimm->grain = 128;		/* Likely, worse case */
+
+		/*
+		 * FIXME: It shouldn't be hard to also fill the DIMM labels
+		 */
+
+		if (dimm->nr_pages) {
+			edac_dbg(1, "DIMM%i: %s size = %d MB%s\n",
+				dimm_fill->count, memory_type[dimm->mtype],
+				PAGES_TO_MiB(dimm->nr_pages),
+				(dimm->edac_mode != EDAC_NONE) ? "(ECC)" : "");
+			edac_dbg(2, "\ttype %d, detail 0x%02x, width %d(total %d)\n",
+				entry->memory_type, entry->type_detail,
+				entry->total_width, entry->data_width);
+		}
+
+		dimm_fill->count++;
+	}
+}
+
+void ghes_edac_report_mem_error(struct ghes *ghes, int sev,
+				struct cper_sec_mem_err *mem_err)
+{
+	enum hw_event_mc_err_type type;
+	struct edac_raw_error_desc *e;
+	struct mem_ctl_info *mci;
+	struct ghes_edac_pvt *pvt = NULL;
+	char *p;
+	u8 grain_bits;
+
+	list_for_each_entry(pvt, &ghes_reglist, list) {
+		if (ghes == pvt->ghes)
+			break;
+	}
+	if (!pvt) {
+		pr_err("Internal error: Can't find EDAC structure\n");
+		return;
+	}
+	mci = pvt->mci;
+	e = &mci->error_desc;
+
+	/* Cleans the error report buffer */
+	memset(e, 0, sizeof (*e));
+	e->error_count = 1;
+	strcpy(e->label, "unknown label");
+	e->msg = pvt->msg;
+	e->other_detail = pvt->other_detail;
+	e->top_layer = -1;
+	e->mid_layer = -1;
+	e->low_layer = -1;
+	*pvt->other_detail = '\0';
+	*pvt->msg = '\0';
+
+	switch (sev) {
+	case GHES_SEV_CORRECTED:
+		type = HW_EVENT_ERR_CORRECTED;
+		break;
+	case GHES_SEV_RECOVERABLE:
+		type = HW_EVENT_ERR_UNCORRECTED;
+		break;
+	case GHES_SEV_PANIC:
+		type = HW_EVENT_ERR_FATAL;
+		break;
+	default:
+	case GHES_SEV_NO:
+		type = HW_EVENT_ERR_INFO;
+	}
+
+	edac_dbg(1, "error validation_bits: 0x%08llx\n",
+		 (long long)mem_err->validation_bits);
+
+	/* Error type, mapped on e->msg */
+	if (mem_err->validation_bits & CPER_MEM_VALID_ERROR_TYPE) {
+		p = pvt->msg;
+		switch (mem_err->error_type) {
+		case 0:
+			p += sprintf(p, "Unknown");
+			break;
+		case 1:
+			p += sprintf(p, "No error");
+			break;
+		case 2:
+			p += sprintf(p, "Single-bit ECC");
+			break;
+		case 3:
+			p += sprintf(p, "Multi-bit ECC");
+			break;
+		case 4:
+			p += sprintf(p, "Single-symbol ChipKill ECC");
+			break;
+		case 5:
+			p += sprintf(p, "Multi-symbol ChipKill ECC");
+			break;
+		case 6:
+			p += sprintf(p, "Master abort");
+			break;
+		case 7:
+			p += sprintf(p, "Target abort");
+			break;
+		case 8:
+			p += sprintf(p, "Parity Error");
+			break;
+		case 9:
+			p += sprintf(p, "Watchdog timeout");
+			break;
+		case 10:
+			p += sprintf(p, "Invalid address");
+			break;
+		case 11:
+			p += sprintf(p, "Mirror Broken");
+			break;
+		case 12:
+			p += sprintf(p, "Memory Sparing");
+			break;
+		case 13:
+			p += sprintf(p, "Scrub corrected error");
+			break;
+		case 14:
+			p += sprintf(p, "Scrub uncorrected error");
+			break;
+		case 15:
+			p += sprintf(p, "Physical Memory Map-out event");
+			break;
+		default:
+			p += sprintf(p, "reserved error (%d)",
+				     mem_err->error_type);
+		}
+	} else {
+		strcpy(pvt->msg, "unknown error");
+	}
+
+	/* Error address */
+	if (mem_err->validation_bits & CPER_MEM_VALID_PHYSICAL_ADDRESS) {
+		e->page_frame_number = mem_err->physical_addr >> PAGE_SHIFT;
+		e->offset_in_page = mem_err->physical_addr & ~PAGE_MASK;
+	}
+
+	/* Error grain */
+	if (mem_err->validation_bits & CPER_MEM_VALID_PHYSICAL_ADDRESS_MASK) {
+		e->grain = ~(mem_err->physical_addr_mask & ~PAGE_MASK);
+	}
+
+	/* Memory error location, mapped on e->location */
+	p = e->location;
+	if (mem_err->validation_bits & CPER_MEM_VALID_NODE)
+		p += sprintf(p, "node:%d ", mem_err->node);
+	if (mem_err->validation_bits & CPER_MEM_VALID_CARD)
+		p += sprintf(p, "card:%d ", mem_err->card);
+	if (mem_err->validation_bits & CPER_MEM_VALID_MODULE)
+		p += sprintf(p, "module:%d ", mem_err->module);
+	if (mem_err->validation_bits & CPER_MEM_VALID_BANK)
+		p += sprintf(p, "bank:%d ", mem_err->bank);
+	if (mem_err->validation_bits & CPER_MEM_VALID_ROW)
+		p += sprintf(p, "row:%d ", mem_err->row);
+	if (mem_err->validation_bits & CPER_MEM_VALID_COLUMN)
+		p += sprintf(p, "col:%d ", mem_err->column);
+	if (mem_err->validation_bits & CPER_MEM_VALID_BIT_POSITION)
+		p += sprintf(p, "bit_pos:%d ", mem_err->bit_pos);
+	if (p > e->location)
+		*(p - 1) = '\0';
+
+	/* All other fields are mapped on e->other_detail */
+	p = pvt->other_detail;
+	if (mem_err->validation_bits & CPER_MEM_VALID_ERROR_STATUS) {
+		u64 status = mem_err->error_status;
+
+		p += sprintf(p, "status(0x%016llx): ", (long long)status);
+		switch ((status >> 8) & 0xff) {
+		case 1:
+			p += sprintf(p, "Error detected internal to the component ");
+			break;
+		case 16:
+			p += sprintf(p, "Error detected in the bus ");
+			break;
+		case 4:
+			p += sprintf(p, "Storage error in DRAM memory ");
+			break;
+		case 5:
+			p += sprintf(p, "Storage error in TLB ");
+			break;
+		case 6:
+			p += sprintf(p, "Storage error in cache ");
+			break;
+		case 7:
+			p += sprintf(p, "Error in one or more functional units ");
+			break;
+		case 8:
+			p += sprintf(p, "component failed self test ");
+			break;
+		case 9:
+			p += sprintf(p, "Overflow or undervalue of internal queue ");
+			break;
+		case 17:
+			p += sprintf(p, "Virtual address not found on IO-TLB or IO-PDIR ");
+			break;
+		case 18:
+			p += sprintf(p, "Improper access error ");
+			break;
+		case 19:
+			p += sprintf(p, "Access to a memory address which is not mapped to any component ");
+			break;
+		case 20:
+			p += sprintf(p, "Loss of Lockstep ");
+			break;
+		case 21:
+			p += sprintf(p, "Response not associated with a request ");
+			break;
+		case 22:
+			p += sprintf(p, "Bus parity error - must also set the A, C, or D Bits ");
+			break;
+		case 23:
+			p += sprintf(p, "Detection of a PATH_ERROR ");
+			break;
+		case 25:
+			p += sprintf(p, "Bus operation timeout ");
+			break;
+		case 26:
+			p += sprintf(p, "A read was issued to data that has been poisoned ");
+			break;
+		default:
+			p += sprintf(p, "reserved ");
+			break;
+		}
+	}
+	if (mem_err->validation_bits & CPER_MEM_VALID_REQUESTOR_ID)
+		p += sprintf(p, "requestorID: 0x%016llx ",
+			     (long long)mem_err->requestor_id);
+	if (mem_err->validation_bits & CPER_MEM_VALID_RESPONDER_ID)
+		p += sprintf(p, "responderID: 0x%016llx ",
+			     (long long)mem_err->responder_id);
+	if (mem_err->validation_bits & CPER_MEM_VALID_TARGET_ID)
+		p += sprintf(p, "targetID: 0x%016llx ",
+			     (long long)mem_err->responder_id);
+	if (p > pvt->other_detail)
+		*(p - 1) = '\0';
+
+	/* Generate the trace event */
+	grain_bits = fls_long(e->grain);
+	sprintf(pvt->detail_location, "APEI location: %s %s",
+		e->location, e->other_detail);
+	trace_mc_event(type, e->msg, e->label, e->error_count,
+		       mci->mc_idx, e->top_layer, e->mid_layer, e->low_layer,
+		       PAGES_TO_MiB(e->page_frame_number) | e->offset_in_page,
+		       grain_bits, e->syndrome, pvt->detail_location);
+
+	/* Report the error via EDAC API */
+	edac_raw_mc_handle_error(type, mci, e);
+}
+EXPORT_SYMBOL_GPL(ghes_edac_report_mem_error);
+
+int ghes_edac_register(struct ghes *ghes, struct device *dev)
+{
+	bool fake = false;
+	int rc, num_dimm = 0;
+	struct mem_ctl_info *mci;
+	struct edac_mc_layer layers[1];
+	struct ghes_edac_pvt *pvt;
+	struct ghes_edac_dimm_fill dimm_fill;
+
+	/* Get the number of DIMMs */
+	dmi_walk(ghes_edac_count_dimms, &num_dimm);
+
+	/* Check if we've got a bogus BIOS */
+	if (num_dimm == 0) {
+		fake = true;
+		num_dimm = 1;
+	}
+
+	layers[0].type = EDAC_MC_LAYER_ALL_MEM;
+	layers[0].size = num_dimm;
+	layers[0].is_virt_csrow = true;
+
+	/*
+	 * We need to serialize edac_mc_alloc() and edac_mc_add_mc(),
+	 * to avoid duplicated memory controller numbers
+	 */
+	mutex_lock(&ghes_edac_lock);
+	mci = edac_mc_alloc(ghes_edac_mc_num, ARRAY_SIZE(layers), layers,
+			    sizeof(*pvt));
+	if (!mci) {
+		pr_info("Can't allocate memory for EDAC data\n");
+		mutex_unlock(&ghes_edac_lock);
+		return -ENOMEM;
+	}
+
+	pvt = mci->pvt_info;
+	memset(pvt, 0, sizeof(*pvt));
+	list_add_tail(&pvt->list, &ghes_reglist);
+	pvt->ghes = ghes;
+	pvt->mci  = mci;
+	mci->pdev = dev;
+
+	mci->mtype_cap = MEM_FLAG_EMPTY;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE;
+	mci->edac_cap = EDAC_FLAG_NONE;
+	mci->mod_name = "ghes_edac.c";
+	mci->mod_ver = GHES_EDAC_REVISION;
+	mci->ctl_name = "ghes_edac";
+	mci->dev_name = "ghes";
+
+	if (!ghes_edac_mc_num) {
+		if (!fake) {
+			pr_info("This EDAC driver relies on BIOS to enumerate memory and get error reports.\n");
+			pr_info("Unfortunately, not all BIOSes reflect the memory layout correctly.\n");
+			pr_info("So, the end result of using this driver varies from vendor to vendor.\n");
+			pr_info("If you find incorrect reports, please contact your hardware vendor\n");
+			pr_info("to correct its BIOS.\n");
+			pr_info("This system has %d DIMM sockets.\n",
+				num_dimm);
+		} else {
+			pr_info("This system has a very crappy BIOS: It doesn't even list the DIMMS.\n");
+			pr_info("Its SMBIOS info is wrong. It is doubtful that the error report would\n");
+			pr_info("work on such system. Use this driver with caution\n");
+		}
+	}
+
+	if (!fake) {
+		/*
+		 * Fill DIMM info from DMI for the memory controller #0
+		 *
+		 * Keep it in blank for the other memory controllers, as
+		 * there's no reliable way to properly credit each DIMM to
+		 * the memory controller, as different BIOSes fill the
+		 * DMI bank location fields on different ways
+		 */
+		if (!ghes_edac_mc_num) {
+			dimm_fill.count = 0;
+			dimm_fill.mci = mci;
+			dmi_walk(ghes_edac_dmidecode, &dimm_fill);
+		}
+	} else {
+		struct dimm_info *dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+						       mci->n_layers, 0, 0, 0);
+
+		dimm->nr_pages = 1;
+		dimm->grain = 128;
+		dimm->mtype = MEM_UNKNOWN;
+		dimm->dtype = DEV_UNKNOWN;
+		dimm->edac_mode = EDAC_SECDED;
+	}
+
+	rc = edac_mc_add_mc(mci);
+	if (rc < 0) {
+		pr_info("Can't register at EDAC core\n");
+		edac_mc_free(mci);
+		mutex_unlock(&ghes_edac_lock);
+		return -ENODEV;
+	}
+
+	ghes_edac_mc_num++;
+	mutex_unlock(&ghes_edac_lock);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ghes_edac_register);
+
+void ghes_edac_unregister(struct ghes *ghes)
+{
+	struct mem_ctl_info *mci;
+	struct ghes_edac_pvt *pvt, *tmp;
+
+	list_for_each_entry_safe(pvt, tmp, &ghes_reglist, list) {
+		if (ghes == pvt->ghes) {
+			mci = pvt->mci;
+			edac_mc_del_mc(mci->pdev);
+			edac_mc_free(mci);
+			list_del(&pvt->list);
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(ghes_edac_unregister);

drivers/edac/i3200_edac.c

@@ -106,16 +106,26 @@ static int nr_channels;
 
 static int how_many_channels(struct pci_dev *pdev)
 {
+	int n_channels;
+
 	unsigned char capid0_8b; /* 8th byte of CAPID0 */
 
 	pci_read_config_byte(pdev, I3200_CAPID0 + 8, &capid0_8b);
+
 	if (capid0_8b & 0x20) { /* check DCD: Dual Channel Disable */
 		edac_dbg(0, "In single channel mode\n");
-		return 1;
+		n_channels = 1;
 	} else {
 		edac_dbg(0, "In dual channel mode\n");
-		return 2;
+		n_channels = 2;
 	}
+
+	if (capid0_8b & 0x10) /* check if both channels are filled */
+		edac_dbg(0, "2 DIMMS per channel disabled\n");
+	else
+		edac_dbg(0, "2 DIMMS per channel enabled\n");
+
+	return n_channels;
 }
 
 static unsigned long eccerrlog_syndrome(u64 log)
@@ -290,6 +300,8 @@ static void i3200_get_drbs(void __iomem *window,
 	for (i = 0; i < I3200_RANKS_PER_CHANNEL; i++) {
 		drbs[0][i] = readw(window + I3200_C0DRB + 2*i) & I3200_DRB_MASK;
 		drbs[1][i] = readw(window + I3200_C1DRB + 2*i) & I3200_DRB_MASK;
+
+		edac_dbg(0, "drb[0][%d] = %d, drb[1][%d] = %d\n", i, drbs[0][i], i, drbs[1][i]);
 	}
 }
 
@@ -311,6 +323,9 @@ static unsigned long drb_to_nr_pages(
 	int n;
 
 	n = drbs[channel][rank];
+	if (!n)
+		return 0;
+
 	if (rank > 0)
 		n -= drbs[channel][rank - 1];
 	if (stacked && (channel == 1) &&
@@ -377,19 +392,19 @@ static int i3200_probe1(struct pci_dev *pdev, int dev_idx)
 	 * cumulative; the last one will contain the total memory
 	 * contained in all ranks.
 	 */
-	for (i = 0; i < mci->nr_csrows; i++) {
+	for (i = 0; i < I3200_DIMMS; i++) {
 		unsigned long nr_pages;
-		struct csrow_info *csrow = mci->csrows[i];
 
-		nr_pages = drb_to_nr_pages(drbs, stacked,
-			i / I3200_RANKS_PER_CHANNEL,
-			i % I3200_RANKS_PER_CHANNEL);
+		for (j = 0; j < nr_channels; j++) {
+			struct dimm_info *dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms,
+							       mci->n_layers, i, j, 0);
 
-		if (nr_pages == 0)
-			continue;
+			nr_pages = drb_to_nr_pages(drbs, stacked, j, i);
+			if (nr_pages == 0)
+				continue;
 
-		for (j = 0; j < nr_channels; j++) {
-			struct dimm_info *dimm = csrow->channels[j]->dimm;
+			edac_dbg(0, "csrow %d, channel %d%s, size = %ld Mb\n", i, j,
+				 stacked ? " (stacked)" : "", PAGES_TO_MiB(nr_pages));
 
 			dimm->nr_pages = nr_pages;
 			dimm->grain = nr_pages << PAGE_SHIFT;

drivers/edac/i5100_edac.c

@@ -27,6 +27,7 @@
 #include <linux/edac.h>
 #include <linux/delay.h>
 #include <linux/mmzone.h>
+#include <linux/debugfs.h>
 
 #include "edac_core.h"
 
@@ -68,6 +69,14 @@
 			I5100_FERR_NF_MEM_M1ERR_MASK)
 #define	I5100_NERR_NF_MEM	0xa4	/* MC Next Non-Fatal Errors */
 #define I5100_EMASK_MEM		0xa8	/* MC Error Mask Register */
+#define I5100_MEM0EINJMSK0	0x200	/* Injection Mask0 Register Channel 0 */
+#define I5100_MEM1EINJMSK0	0x208	/* Injection Mask0 Register Channel 1 */
+#define		I5100_MEMXEINJMSK0_EINJEN	(1 << 27)
+#define I5100_MEM0EINJMSK1	0x204	/* Injection Mask1 Register Channel 0 */
+#define I5100_MEM1EINJMSK1	0x206	/* Injection Mask1 Register Channel 1 */
+
+/* Device 19, Function 0 */
+#define I5100_DINJ0 0x9a
 
 /* device 21 and 22, func 0 */
 #define I5100_MTR_0	0x154	/* Memory Technology Registers 0-3 */
@@ -338,13 +347,26 @@ struct i5100_priv {
 	unsigned ranksperchan;	/* number of ranks per channel */
 
 	struct pci_dev *mc;	/* device 16 func 1 */
+	struct pci_dev *einj;	/* device 19 func 0 */
 	struct pci_dev *ch0mm;	/* device 21 func 0 */
 	struct pci_dev *ch1mm;	/* device 22 func 0 */
 
 	struct delayed_work i5100_scrubbing;
 	int scrub_enable;
+
+	/* Error injection */
+	u8 inject_channel;
+	u8 inject_hlinesel;
+	u8 inject_deviceptr1;
+	u8 inject_deviceptr2;
+	u16 inject_eccmask1;
+	u16 inject_eccmask2;
+
+	struct dentry *debugfs;
 };
 
+static struct dentry *i5100_debugfs;
+
 /* map a rank/chan to a slot number on the mainboard */
 static int i5100_rank_to_slot(const struct mem_ctl_info *mci,
 			      int chan, int rank)
@@ -863,13 +885,126 @@ static void i5100_init_csrows(struct mem_ctl_info *mci)
 	}
 }
 
+/****************************************************************************
+ *                       Error injection routines
+ ****************************************************************************/
+
+static void i5100_do_inject(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+	u32 mask0;
+	u16 mask1;
+
+	/* MEM[1:0]EINJMSK0
+	 * 31    - ADDRMATCHEN
+	 * 29:28 - HLINESEL
+	 *         00 Reserved
+	 *         01 Lower half of cache line
+	 *         10 Upper half of cache line
+	 *         11 Both upper and lower parts of cache line
+	 * 27    - EINJEN
+	 * 25:19 - XORMASK1 for deviceptr1
+	 * 9:5   - SEC2RAM for deviceptr2
+	 * 4:0   - FIR2RAM for deviceptr1
+	 */
+	mask0 = ((priv->inject_hlinesel & 0x3) << 28) |
+		I5100_MEMXEINJMSK0_EINJEN |
+		((priv->inject_eccmask1 & 0xffff) << 10) |
+		((priv->inject_deviceptr2 & 0x1f) << 5) |
+		(priv->inject_deviceptr1 & 0x1f);
+
+	/* MEM[1:0]EINJMSK1
+	 * 15:0  - XORMASK2 for deviceptr2
+	 */
+	mask1 = priv->inject_eccmask2;
+
+	if (priv->inject_channel == 0) {
+		pci_write_config_dword(priv->mc, I5100_MEM0EINJMSK0, mask0);
+		pci_write_config_word(priv->mc, I5100_MEM0EINJMSK1, mask1);
+	} else {
+		pci_write_config_dword(priv->mc, I5100_MEM1EINJMSK0, mask0);
+		pci_write_config_word(priv->mc, I5100_MEM1EINJMSK1, mask1);
+	}
+
+	/* Error Injection Response Function
+	 * Intel 5100 Memory Controller Hub Chipset (318378) datasheet
+	 * hints about this register but carry no data about them. All
+	 * data regarding device 19 is based on experimentation and the
+	 * Intel 7300 Chipset Memory Controller Hub (318082) datasheet
+	 * which appears to be accurate for the i5100 in this area.
+	 *
+	 * The injection code don't work without setting this register.
+	 * The register needs to be flipped off then on else the hardware
+	 * will only preform the first injection.
+	 *
+	 * Stop condition bits 7:4
+	 * 1010 - Stop after one injection
+	 * 1011 - Never stop injecting faults
+	 *
+	 * Start condition bits 3:0
+	 * 1010 - Never start
+	 * 1011 - Start immediately
+	 */
+	pci_write_config_byte(priv->einj, I5100_DINJ0, 0xaa);
+	pci_write_config_byte(priv->einj, I5100_DINJ0, 0xab);
+}
+
+#define to_mci(k) container_of(k, struct mem_ctl_info, dev)
+static ssize_t inject_enable_write(struct file *file, const char __user *data,
+		size_t count, loff_t *ppos)
+{
+	struct device *dev = file->private_data;
+	struct mem_ctl_info *mci = to_mci(dev);
+
+	i5100_do_inject(mci);
+
+	return count;
+}
+
+static const struct file_operations i5100_inject_enable_fops = {
+	.open = simple_open,
+	.write = inject_enable_write,
+	.llseek = generic_file_llseek,
+};
+
+static int i5100_setup_debugfs(struct mem_ctl_info *mci)
+{
+	struct i5100_priv *priv = mci->pvt_info;
+
+	if (!i5100_debugfs)
+		return -ENODEV;
+
+	priv->debugfs = debugfs_create_dir(mci->bus.name, i5100_debugfs);
+
+	if (!priv->debugfs)
+		return -ENOMEM;
+
+	debugfs_create_x8("inject_channel", S_IRUGO | S_IWUSR, priv->debugfs,
+			&priv->inject_channel);
+	debugfs_create_x8("inject_hlinesel", S_IRUGO | S_IWUSR, priv->debugfs,
+			&priv->inject_hlinesel);
+	debugfs_create_x8("inject_deviceptr1", S_IRUGO | S_IWUSR, priv->debugfs,
+			&priv->inject_deviceptr1);
+	debugfs_create_x8("inject_deviceptr2", S_IRUGO | S_IWUSR, priv->debugfs,
+			&priv->inject_deviceptr2);
+	debugfs_create_x16("inject_eccmask1", S_IRUGO | S_IWUSR, priv->debugfs,
+			&priv->inject_eccmask1);
+	debugfs_create_x16("inject_eccmask2", S_IRUGO | S_IWUSR, priv->debugfs,
+			&priv->inject_eccmask2);
+	debugfs_create_file("inject_enable", S_IWUSR, priv->debugfs,
+			&mci->dev, &i5100_inject_enable_fops);
+
+	return 0;
+
+}
+
 static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	int rc;
 	struct mem_ctl_info *mci;
 	struct edac_mc_layer layers[2];
 	struct i5100_priv *priv;
-	struct pci_dev *ch0mm, *ch1mm;
+	struct pci_dev *ch0mm, *ch1mm, *einj;
 	int ret = 0;
 	u32 dw;
 	int ranksperch;
@@ -941,6 +1076,22 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto bail_disable_ch1;
 	}
 
+
+	/* device 19, func 0, Error injection */
+	einj = pci_get_device_func(PCI_VENDOR_ID_INTEL,
+				    PCI_DEVICE_ID_INTEL_5100_19, 0);
+	if (!einj) {
+		ret = -ENODEV;
+		goto bail_einj;
+	}
+
+	rc = pci_enable_device(einj);
+	if (rc < 0) {
+		ret = rc;
+		goto bail_disable_einj;
+	}
+
+
 	mci->pdev = &pdev->dev;
 
 	priv = mci->pvt_info;
@@ -948,6 +1099,7 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	priv->mc = pdev;
 	priv->ch0mm = ch0mm;
 	priv->ch1mm = ch1mm;
+	priv->einj = einj;
 
 	INIT_DELAYED_WORK(&(priv->i5100_scrubbing), i5100_refresh_scrubbing);
 
@@ -975,6 +1127,13 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	mci->set_sdram_scrub_rate = i5100_set_scrub_rate;
 	mci->get_sdram_scrub_rate = i5100_get_scrub_rate;
 
+	priv->inject_channel = 0;
+	priv->inject_hlinesel = 0;
+	priv->inject_deviceptr1 = 0;
+	priv->inject_deviceptr2 = 0;
+	priv->inject_eccmask1 = 0;
+	priv->inject_eccmask2 = 0;
+
 	i5100_init_csrows(mci);
 
 	/* this strange construction seems to be in every driver, dunno why */
@@ -992,6 +1151,8 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto bail_scrub;
 	}
 
+	i5100_setup_debugfs(mci);
+
 	return ret;
 
 bail_scrub:
@@ -999,6 +1160,12 @@ bail_scrub:
 	cancel_delayed_work_sync(&(priv->i5100_scrubbing));
 	edac_mc_free(mci);
 
+bail_disable_einj:
+	pci_disable_device(einj);
+
+bail_einj:
+	pci_dev_put(einj);
+
 bail_disable_ch1:
 	pci_disable_device(ch1mm);
 
@@ -1030,14 +1197,18 @@ static void i5100_remove_one(struct pci_dev *pdev)
 
 	priv = mci->pvt_info;
 
+	debugfs_remove_recursive(priv->debugfs);
+
 	priv->scrub_enable = 0;
 	cancel_delayed_work_sync(&(priv->i5100_scrubbing));
 
 	pci_disable_device(pdev);
 	pci_disable_device(priv->ch0mm);
 	pci_disable_device(priv->ch1mm);
+	pci_disable_device(priv->einj);
 	pci_dev_put(priv->ch0mm);
 	pci_dev_put(priv->ch1mm);
+	pci_dev_put(priv->einj);
 
 	edac_mc_free(mci);
 }
@@ -1060,13 +1231,16 @@ static int __init i5100_init(void)
 {
 	int pci_rc;
 
-	pci_rc = pci_register_driver(&i5100_driver);
+	i5100_debugfs = debugfs_create_dir("i5100_edac", NULL);
 
+	pci_rc = pci_register_driver(&i5100_driver);
 	return (pci_rc < 0) ? pci_rc : 0;
 }
 
 static void __exit i5100_exit(void)
 {
+	debugfs_remove(i5100_debugfs);
+
 	pci_unregister_driver(&i5100_driver);
 }
 

drivers/edac/i7core_edac.c

@@ -420,21 +420,21 @@ static inline int numdimms(u32 dimms)
 
 static inline int numrank(u32 rank)
 {
-	static int ranks[4] = { 1, 2, 4, -EINVAL };
+	static const int ranks[] = { 1, 2, 4, -EINVAL };
 
 	return ranks[rank & 0x3];
 }
 
 static inline int numbank(u32 bank)
 {
-	static int banks[4] = { 4, 8, 16, -EINVAL };
+	static const int banks[] = { 4, 8, 16, -EINVAL };
 
 	return banks[bank & 0x3];
 }
 
 static inline int numrow(u32 row)
 {
-	static int rows[8] = {
+	static const int rows[] = {
 		1 << 12, 1 << 13, 1 << 14, 1 << 15,
 		1 << 16, -EINVAL, -EINVAL, -EINVAL,
 	};
@@ -444,7 +444,7 @@ static inline int numrow(u32 row)
 
 static inline int numcol(u32 col)
 {
-	static int cols[8] = {
+	static const int cols[] = {
 		1 << 10, 1 << 11, 1 << 12, -EINVAL,
 	};
 	return cols[col & 0x3];

drivers/edac/sb_edac.c

@@ -639,7 +639,7 @@ static void get_memory_layout(const struct mem_ctl_info *mci)
 	tmp_mb = (1 + pvt->tohm) >> 20;
 
 	mb = div_u64_rem(tmp_mb, 1000, &kb);
-	edac_dbg(0, "TOHM: %u.%03u GB (0x%016Lx)", mb, kb, (u64)pvt->tohm);
+	edac_dbg(0, "TOHM: %u.%03u GB (0x%016Lx)\n", mb, kb, (u64)pvt->tohm);
 
 	/*
 	 * Step 2) Get SAD range and SAD Interleave list

include/acpi/ghes.h

@@ -0,0 +1,72 @@
+#include <acpi/apei.h>
+#include <acpi/hed.h>
+
+/*
+ * One struct ghes is created for each generic hardware error source.
+ * It provides the context for APEI hardware error timer/IRQ/SCI/NMI
+ * handler.
+ *
+ * estatus: memory buffer for error status block, allocated during
+ * HEST parsing.
+ */
+#define GHES_TO_CLEAR		0x0001
+#define GHES_EXITING		0x0002
+
+struct ghes {
+	struct acpi_hest_generic *generic;
+	struct acpi_hest_generic_status *estatus;
+	u64 buffer_paddr;
+	unsigned long flags;
+	union {
+		struct list_head list;
+		struct timer_list timer;
+		unsigned int irq;
+	};
+};
+
+struct ghes_estatus_node {
+	struct llist_node llnode;
+	struct acpi_hest_generic *generic;
+	struct ghes *ghes;
+};
+
+struct ghes_estatus_cache {
+	u32 estatus_len;
+	atomic_t count;
+	struct acpi_hest_generic *generic;
+	unsigned long long time_in;
+	struct rcu_head rcu;
+};
+
+enum {
+	GHES_SEV_NO = 0x0,
+	GHES_SEV_CORRECTED = 0x1,
+	GHES_SEV_RECOVERABLE = 0x2,
+	GHES_SEV_PANIC = 0x3,
+};
+
+/* From drivers/edac/ghes_edac.c */
+
+#ifdef CONFIG_EDAC_GHES
+void ghes_edac_report_mem_error(struct ghes *ghes, int sev,
+				struct cper_sec_mem_err *mem_err);
+
+int ghes_edac_register(struct ghes *ghes, struct device *dev);
+
+void ghes_edac_unregister(struct ghes *ghes);
+
+#else
+static inline void ghes_edac_report_mem_error(struct ghes *ghes, int sev,
+				       struct cper_sec_mem_err *mem_err)
+{
+}
+
+static inline int ghes_edac_register(struct ghes *ghes, struct device *dev)
+{
+	return 0;
+}
+
+static inline void ghes_edac_unregister(struct ghes *ghes)
+{
+}
+#endif

include/linux/edac.h

@@ -14,7 +14,6 @@
 
 #include <linux/atomic.h>
 #include <linux/device.h>
-#include <linux/kobject.h>
 #include <linux/completion.h>
 #include <linux/workqueue.h>
 #include <linux/debugfs.h>
@@ -48,8 +47,17 @@ static inline void opstate_init(void)
 	return;
 }
 
+/* Max length of a DIMM label*/
 #define EDAC_MC_LABEL_LEN	31
-#define MC_PROC_NAME_MAX_LEN	7
+
+/* Maximum size of the location string */
+#define LOCATION_SIZE 80
+
+/* Defines the maximum number of labels that can be reported */
+#define EDAC_MAX_LABELS		8
+
+/* String used to join two or more labels */
+#define OTHER_LABEL " or "
 
 /**
  * enum dev_type - describe the type of memory DRAM chips used at the stick
@@ -101,8 +109,24 @@ enum hw_event_mc_err_type {
 	HW_EVENT_ERR_CORRECTED,
 	HW_EVENT_ERR_UNCORRECTED,
 	HW_EVENT_ERR_FATAL,
+	HW_EVENT_ERR_INFO,
 };
 
+static inline char *mc_event_error_type(const unsigned int err_type)
+{
+	switch (err_type) {
+	case HW_EVENT_ERR_CORRECTED:
+		return "Corrected";
+	case HW_EVENT_ERR_UNCORRECTED:
+		return "Uncorrected";
+	case HW_EVENT_ERR_FATAL:
+		return "Fatal";
+	default:
+	case HW_EVENT_ERR_INFO:
+		return "Info";
+	}
+}
+
 /**
  * enum mem_type - memory types. For a more detailed reference, please see
  *			http://en.wikipedia.org/wiki/DRAM
@@ -376,6 +400,9 @@ enum scrub_type {
  * @EDAC_MC_LAYER_CHANNEL:	memory layer is named "channel"
  * @EDAC_MC_LAYER_SLOT:		memory layer is named "slot"
  * @EDAC_MC_LAYER_CHIP_SELECT:	memory layer is named "chip select"
+ * @EDAC_MC_LAYER_ALL_MEM:	memory layout is unknown. All memory is mapped
+ *				as a single memory area. This is used when
+ *				retrieving errors from a firmware driven driver.
  *
  * This enum is used by the drivers to tell edac_mc_sysfs what name should
  * be used when describing a memory stick location.
@@ -385,6 +412,7 @@ enum edac_mc_layer_type {
 	EDAC_MC_LAYER_CHANNEL,
 	EDAC_MC_LAYER_SLOT,
 	EDAC_MC_LAYER_CHIP_SELECT,
+	EDAC_MC_LAYER_ALL_MEM,
 };
 
 /**
@@ -551,6 +579,46 @@ struct errcount_attribute_data {
 	int layer0, layer1, layer2;
 };
 
+/**
+ * edac_raw_error_desc - Raw error report structure
+ * @grain:			minimum granularity for an error report, in bytes
+ * @error_count:		number of errors of the same type
+ * @top_layer:			top layer of the error (layer[0])
+ * @mid_layer:			middle layer of the error (layer[1])
+ * @low_layer:			low layer of the error (layer[2])
+ * @page_frame_number:		page where the error happened
+ * @offset_in_page:		page offset
+ * @syndrome:			syndrome of the error (or 0 if unknown or if
+ * 				the syndrome is not applicable)
+ * @msg:			error message
+ * @location:			location of the error
+ * @label:			label of the affected DIMM(s)
+ * @other_detail:		other driver-specific detail about the error
+ * @enable_per_layer_report:	if false, the error affects all layers
+ *				(typically, a memory controller error)
+ */
+struct edac_raw_error_desc {
+	/*
+	 * NOTE: everything before grain won't be cleaned by
+	 * edac_raw_error_desc_clean()
+	 */
+	char location[LOCATION_SIZE];
+	char label[(EDAC_MC_LABEL_LEN + 1 + sizeof(OTHER_LABEL)) * EDAC_MAX_LABELS];
+	long grain;
+
+	/* the vars below and grain will be cleaned on every new error report */
+	u16 error_count;
+	int top_layer;
+	int mid_layer;
+	int low_layer;
+	unsigned long page_frame_number;
+	unsigned long offset_in_page;
+	unsigned long syndrome;
+	const char *msg;
+	const char *other_detail;
+	bool enable_per_layer_report;
+};
+
 /* MEMORY controller information structure
  */
 struct mem_ctl_info {
@@ -630,7 +698,6 @@ struct mem_ctl_info {
 	const char *mod_ver;
 	const char *ctl_name;
 	const char *dev_name;
-	char proc_name[MC_PROC_NAME_MAX_LEN + 1];
 	void *pvt_info;
 	unsigned long start_time;	/* mci load start time (in jiffies) */
 
@@ -659,6 +726,12 @@ struct mem_ctl_info {
 	/* work struct for this MC */
 	struct delayed_work work;
 
+	/*
+	 * Used to report an error - by being at the global struct
+	 * makes the memory allocated by the EDAC core
+	 */
+	struct edac_raw_error_desc error_desc;
+
 	/* the internal state of this controller instance */
 	int op_state;
 

include/linux/pci_ids.h

@@ -2802,6 +2802,7 @@
 #define PCI_DEVICE_ID_INTEL_JAKETOWN_UBOX	0x3ce0
 #define PCI_DEVICE_ID_INTEL_IOAT_SNB	0x402f
 #define PCI_DEVICE_ID_INTEL_5100_16	0x65f0
+#define PCI_DEVICE_ID_INTEL_5100_19	0x65f3
 #define PCI_DEVICE_ID_INTEL_5100_21	0x65f5
 #define PCI_DEVICE_ID_INTEL_5100_22	0x65f6
 #define PCI_DEVICE_ID_INTEL_5400_ERR	0x4030

include/ras/ras_event.h

@@ -78,9 +78,7 @@ TRACE_EVENT(mc_event,
 
 	TP_printk("%d %s error%s:%s%s on %s (mc:%d location:%d:%d:%d address:0x%08lx grain:%d syndrome:0x%08lx%s%s)",
 		  __entry->error_count,
-		  (__entry->error_type == HW_EVENT_ERR_CORRECTED) ? "Corrected" :
-			((__entry->error_type == HW_EVENT_ERR_FATAL) ?
-			"Fatal" : "Uncorrected"),
+		  mc_event_error_type(__entry->error_type),
 		  __entry->error_count > 1 ? "s" : "",
 		  ((char *)__get_str(msg))[0] ? " " : "",
 		  __get_str(msg),