Merge branch 'for_3.8/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.8/dt

Documentation/devicetree/bindings/arm/omap/counter.txt

@@ -0,0 +1,15 @@
+OMAP Counter-32K bindings
+
+Required properties:
+- compatible:	Must be "ti,omap-counter32k" for OMAP controllers
+- reg:		Contains timer register address range (base address and length)
+- ti,hwmods:	Name of the hwmod associated to the counter, which is typically
+		"counter_32k"
+
+Example:
+
+counter32k: counter@4a304000 {
+	compatible = "ti,omap-counter32k";
+	reg = <0x4a304000 0x20>;
+	ti,hwmods = "counter_32k";
+};

Documentation/devicetree/bindings/arm/omap/timer.txt

@@ -0,0 +1,31 @@
+OMAP Timer bindings
+
+Required properties:
+- compatible:		Must be "ti,omap2-timer" for OMAP2+ controllers.
+- reg:			Contains timer register address range (base address and
+			length).
+- interrupts: 		Contains the interrupt information for the timer. The
+			format is being dependent on which interrupt controller
+			the OMAP device uses.
+- ti,hwmods:		Name of the hwmod associated to the timer, "timer<X>",
+			where <X> is the instance number of the timer from the
+			HW spec.
+
+Optional properties:
+- ti,timer-alwon:	Indicates the timer is in an alway-on power domain.
+- ti,timer-dsp:		Indicates the timer can interrupt the on-chip DSP in
+			addition to the ARM CPU.
+- ti,timer-pwm: 	Indicates the timer can generate a PWM output.
+- ti,timer-secure: 	Indicates the timer is reserved on a secure OMAP device
+			and therefore cannot be used by the kernel.
+
+Example:
+
+timer12: timer@48304000 {
+	compatible = "ti,omap2-timer";
+	reg = <0x48304000 0x400>;
+	interrupts = <95>;
+	ti,hwmods = "timer12"
+	ti,timer-alwon;
+	ti,timer-secure;
+};

Documentation/devicetree/bindings/bus/omap-ocp2scp.txt

@@ -2,9 +2,27 @@
 
 properties:
 - compatible : Should be "ti,omap-ocp2scp"
+- reg : Address and length of the register set for the device
 - #address-cells, #size-cells : Must be present if the device has sub-nodes
 - ranges : the child address space are mapped 1:1 onto the parent address space
 - ti,hwmods : must be "ocp2scp_usb_phy"
 
 Sub-nodes:
 All the devices connected to ocp2scp are described using sub-node to ocp2scp
+
+ocp2scp@4a0ad000 {
+	compatible = "ti,omap-ocp2scp";
+	reg = <0x4a0ad000 0x1f>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+	ti,hwmods = "ocp2scp_usb_phy";
+
+	subnode1 {
+	...
+	};
+
+	subnode2 {
+	...
+	};
+};

Documentation/devicetree/bindings/i2c/trivial-devices.txt

@@ -55,5 +55,7 @@ st-micro,24c256		i2c serial eeprom  (24cxx)
 stm,m41t00		Serial Access TIMEKEEPER
 stm,m41t62		Serial real-time clock (RTC) with alarm
 stm,m41t80		M41T80 - SERIAL ACCESS RTC WITH ALARMS
+taos,tsl2550		Ambient Light Sensor with SMBUS/Two Wire Serial Interface
 ti,tsc2003		I2C Touch-Screen Controller
 ti,tmp102		Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface
+ti,tmp275		Digital Temperature Sensor

arch/arm/boot/dts/Makefile

@@ -63,12 +63,13 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-m28evk.dtb \
 	imx28-tx28.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+	omap3-beagle.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
 	omap4-panda.dtb \
-	omap4-pandaES.dtb \
-	omap4-var_som.dtb \
+	omap4-panda-es.dtb \
+	omap4-var-som.dtb \
 	omap4-sdp.dtb \
 	omap5-evm.dtb \
 	am335x-evm.dtb \

arch/arm/boot/dts/am335x-bone.dts

@@ -13,6 +13,12 @@
 	model = "TI AM335x BeagleBone";
 	compatible = "ti,am335x-bone", "ti,am33xx";
 
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */

arch/arm/boot/dts/am335x-evm.dts

@@ -13,6 +13,12 @@
 	model = "TI AM335x EVM";
 	compatible = "ti,am335x-evm", "ti,am33xx";
 
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
@@ -31,6 +37,49 @@
 				reg = <0x2d>;
 			};
 		};
+
+		i2c2: i2c@4802a000 {
+			status = "okay";
+			clock-frequency = <100000>;
+
+			lis331dlh: lis331dlh@18 {
+				compatible = "st,lis331dlh", "st,lis3lv02d";
+				reg = <0x18>;
+				Vdd-supply = <&lis3_reg>;
+				Vdd_IO-supply = <&lis3_reg>;
+
+				st,click-single-x;
+				st,click-single-y;
+				st,click-single-z;
+				st,click-thresh-x = <10>;
+				st,click-thresh-y = <10>;
+				st,click-thresh-z = <10>;
+				st,irq1-click;
+				st,irq2-click;
+				st,wakeup-x-lo;
+				st,wakeup-x-hi;
+				st,wakeup-y-lo;
+				st,wakeup-y-hi;
+				st,wakeup-z-lo;
+				st,wakeup-z-hi;
+				st,min-limit-x = <120>;
+				st,min-limit-y = <120>;
+				st,min-limit-z = <140>;
+				st,max-limit-x = <550>;
+				st,max-limit-y = <550>;
+				st,max-limit-z = <750>;
+			};
+
+			tsl2550: tsl2550@39 {
+				compatible = "taos,tsl2550";
+				reg = <0x39>;
+			};
+
+			tmp275: tmp275@48 {
+				compatible = "ti,tmp275";
+				reg = <0x48>;
+			};
+		};
 	};
 
 	vbat: fixedregulator@0 {
@@ -40,6 +89,12 @@
 		regulator-max-microvolt = <5000000>;
 		regulator-boot-on;
 	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
 };
 
 /include/ "tps65910.dtsi"

arch/arm/boot/dts/am335x-evmsk.dts

@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * AM335x Starter Kit
+ * http://www.ti.com/tool/tmdssk3358
+ */
+
+/dts-v1/;
+
+/include/ "am33xx.dtsi"
+
+/ {
+	model = "TI AM335x EVM-SK";
+	compatible = "ti,am335x-evmsk", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	ocp {
+		uart1: serial@44e09000 {
+			status = "okay";
+		};
+
+		i2c1: i2c@44e0b000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			tps: tps@2d {
+				reg = <0x2d>;
+			};
+
+			lis331dlh: lis331dlh@18 {
+				compatible = "st,lis331dlh", "st,lis3lv02d";
+				reg = <0x18>;
+				Vdd-supply = <&lis3_reg>;
+				Vdd_IO-supply = <&lis3_reg>;
+
+				st,click-single-x;
+				st,click-single-y;
+				st,click-single-z;
+				st,click-thresh-x = <10>;
+				st,click-thresh-y = <10>;
+				st,click-thresh-z = <10>;
+				st,irq1-click;
+				st,irq2-click;
+				st,wakeup-x-lo;
+				st,wakeup-x-hi;
+				st,wakeup-y-lo;
+				st,wakeup-y-hi;
+				st,wakeup-z-lo;
+				st,wakeup-z-hi;
+				st,min-limit-x = <120>;
+				st,min-limit-y = <120>;
+				st,min-limit-z = <140>;
+				st,max-limit-x = <550>;
+				st,max-limit-y = <550>;
+				st,max-limit-z = <750>;
+			};
+		};
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-always-on;
+		};
+	};
+};

arch/arm/boot/dts/am33xx.dtsi

@@ -12,6 +12,7 @@
 
 / {
 	compatible = "ti,am33xx";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		serial0 = &uart1;
@@ -25,6 +26,21 @@
 	cpus {
 		cpu@0 {
 			compatible = "arm,cortex-a8";
+
+			/*
+			 * To consider voltage drop between PMIC and SoC,
+			 * tolerance value is reduced to 2% from 4% and
+			 * voltage value is increased as a precaution.
+			 */
+			operating-points = <
+				/* kHz    uV */
+				720000  1285000
+				600000  1225000
+				500000  1125000
+				275000  1125000
+			>;
+			voltage-tolerance = <2>; /* 2 percentage */
+			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
 
@@ -40,6 +56,15 @@
 		};
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		compatible = "pinctrl-single";
+		reg = <0x44e10800 0x0238>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x7f>;
+	};
+
 	/*
 	 * XXX: Use a flat representation of the AM33XX interconnect.
 	 * The real AM33XX interconnect network is quite complex.Since
@@ -70,7 +95,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x44e07000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <96>;
 		};
 
@@ -82,7 +106,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x4804c000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <98>;
 		};
 
@@ -94,7 +117,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x481ac000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <32>;
 		};
 
@@ -106,7 +128,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x481ae000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <62>;
 		};
 
@@ -115,7 +136,6 @@
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 			reg = <0x44e09000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <72>;
 			status = "disabled";
 		};
@@ -125,7 +145,6 @@
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 			reg = <0x48022000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <73>;
 			status = "disabled";
 		};
@@ -135,7 +154,6 @@
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 			reg = <0x48024000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <74>;
 			status = "disabled";
 		};
@@ -145,7 +163,6 @@
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 			reg = <0x481a6000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <44>;
 			status = "disabled";
 		};
@@ -155,7 +172,6 @@
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 			reg = <0x481a8000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <45>;
 			status = "disabled";
 		};
@@ -165,7 +181,6 @@
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 			reg = <0x481aa000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <46>;
 			status = "disabled";
 		};
@@ -176,7 +191,6 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
 			reg = <0x44e0b000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <70>;
 			status = "disabled";
 		};
@@ -187,7 +201,6 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
 			reg = <0x4802a000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <71>;
 			status = "disabled";
 		};
@@ -198,7 +211,6 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 			reg = <0x4819c000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <30>;
 			status = "disabled";
 		};
@@ -207,8 +219,107 @@
 			compatible = "ti,omap3-wdt";
 			ti,hwmods = "wd_timer2";
 			reg = <0x44e35000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <91>;
 		};
+
+		dcan0: d_can@481cc000 {
+			compatible = "bosch,d_can";
+			ti,hwmods = "d_can0";
+			reg = <0x481cc000 0x2000>;
+			interrupts = <52>;
+			status = "disabled";
+		};
+
+		dcan1: d_can@481d0000 {
+			compatible = "bosch,d_can";
+			ti,hwmods = "d_can1";
+			reg = <0x481d0000 0x2000>;
+			interrupts = <55>;
+			status = "disabled";
+		};
+
+		timer1: timer@44e31000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x44e31000 0x400>;
+			interrupts = <67>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48040000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48040000 0x400>;
+			interrupts = <68>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48042000 0x400>;
+			interrupts = <69>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48044000 0x400>;
+			interrupts = <92>;
+			ti,hwmods = "timer4";
+			ti,timer-pwm;
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48046000 0x400>;
+			interrupts = <93>;
+			ti,hwmods = "timer5";
+			ti,timer-pwm;
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48048000 0x400>;
+			interrupts = <94>;
+			ti,hwmods = "timer6";
+			ti,timer-pwm;
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4804a000 0x400>;
+			interrupts = <95>;
+			ti,hwmods = "timer7";
+			ti,timer-pwm;
+		};
+
+		rtc@44e3e000 {
+			compatible = "ti,da830-rtc";
+			reg = <0x44e3e000 0x1000>;
+			interrupts = <75
+				      76>;
+			ti,hwmods = "rtc";
+		};
+
+		spi0: spi@48030000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x48030000 0x400>;
+			interrupt = <65>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi0";
+			status = "disabled";
+		};
+
+		spi1: spi@481a0000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x481a0000 0x400>;
+			interrupt = <125>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi1";
+			status = "disabled";
+		};
 	};
 };

arch/arm/boot/dts/omap2.dtsi

@@ -12,6 +12,7 @@
 
 / {
 	compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		serial0 = &uart1;
@@ -65,5 +66,90 @@
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
+
+		timer2: timer@4802a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4802a000 0x400>;
+			interrupts = <38>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48078000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48078000 0x400>;
+			interrupts = <39>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@4807a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4807a000 0x400>;
+			interrupts = <40>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@4807c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4807c000 0x400>;
+			interrupts = <41>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4807e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4807e000 0x400>;
+			interrupts = <42>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@48080000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48080000 0x400>;
+			interrupts = <43>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@48082000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48082000 0x400>;
+			interrupts = <44>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+		};
+
+		timer9: timer@48084000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48084000 0x400>;
+			interrupts = <45>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x400>;
+			interrupts = <46>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x400>;
+			interrupts = <47>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer12: timer@4808a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4808a000 0x400>;
+			interrupts = <48>;
+			ti,hwmods = "timer12";
+			ti,timer-pwm;
+		};
 	};
 };

arch/arm/boot/dts/omap2420.dtsi

@@ -14,6 +14,12 @@
 	compatible = "ti,omap2420", "ti,omap2";
 
 	ocp {
+		counter32k: counter@48004000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x48004000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap2420_pmx: pinmux@48000030 {
 			compatible = "ti,omap2420-padconf", "pinctrl-single";
 			reg = <0x48000030 0x0113>;
@@ -30,7 +36,6 @@
 			interrupts = <59>, /* TX interrupt */
 				     <60>; /* RX interrupt */
 			interrupt-names = "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,hwmods = "mcbsp1";
 		};
 
@@ -41,8 +46,15 @@
 			interrupts = <62>, /* TX interrupt */
 				     <63>; /* RX interrupt */
 			interrupt-names = "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,hwmods = "mcbsp2";
 		};
+
+		timer1: timer@48028000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48028000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
 	};
 };

arch/arm/boot/dts/omap2430.dtsi

@@ -14,6 +14,12 @@
 	compatible = "ti,omap2430", "ti,omap2";
 
 	ocp {
+		counter32k: counter@49020000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x49020000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap2430_pmx: pinmux@49002030 {
 			compatible = "ti,omap2430-padconf", "pinctrl-single";
 			reg = <0x49002030 0x0154>;
@@ -32,7 +38,6 @@
 				     <60>, /* RX interrupt */
 				     <61>; /* RX overflow interrupt */
 			interrupt-names = "common", "tx", "rx", "rx_overflow";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -45,7 +50,6 @@
 				     <62>, /* TX interrupt */
 				     <63>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp2";
 		};
@@ -58,7 +62,6 @@
 				     <89>, /* TX interrupt */
 				     <90>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3";
 		};
@@ -71,7 +74,6 @@
 				     <54>, /* TX interrupt */
 				     <55>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp4";
 		};
@@ -84,9 +86,16 @@
 				     <81>, /* TX interrupt */
 				     <82>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp5";
 		};
+
+		timer1: timer@49018000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49018000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
 	};
 };

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -55,12 +55,6 @@
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 		interrupt-parent = <&intc>;
 
-		vsim: regulator-vsim {
-			compatible = "ti,twl4030-vsim";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
 		twl_audio: audio {
 			compatible = "ti,twl4030-audio";
 			codec {

arch/arm/boot/dts/omap3-beagle.dts

@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	model = "TI OMAP3 BeagleBoard";
+	compatible = "ti,omap3-beagle", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pmu_stat {
+			label = "beagleboard::pmu_stat";
+			gpios = <&twl_gpio 19 0>; /* LEDB */
+		};
+
+		heartbeat {
+			label = "beagleboard::usr0";
+			gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "beagleboard::usr1";
+			gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};

arch/arm/boot/dts/omap3.dtsi

@@ -12,6 +12,7 @@
 
 / {
 	compatible = "ti,omap3430", "ti,omap3";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		serial0 = &uart1;
@@ -60,6 +61,12 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		counter32k: counter@48320000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x48320000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		intc: interrupt-controller@48200000 {
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
@@ -240,7 +247,6 @@
 				     <59>, /* TX interrupt */
 				     <60>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -255,7 +261,6 @@
 				     <63>, /* RX interrupt */
 				     <4>;  /* Sidetone */
 			interrupt-names = "common", "tx", "rx", "sidetone";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <1280>;
 			ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
 		};
@@ -270,7 +275,6 @@
 				     <90>, /* RX interrupt */
 				     <5>;  /* Sidetone */
 			interrupt-names = "common", "tx", "rx", "sidetone";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
 		};
@@ -283,7 +287,6 @@
 				     <54>, /* TX interrupt */
 				     <55>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp4";
 		};
@@ -296,9 +299,103 @@
 				     <81>, /* TX interrupt */
 				     <82>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp5";
 		};
+
+		timer1: timer@48318000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48318000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@49032000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49032000 0x400>;
+			interrupts = <38>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@49034000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49034000 0x400>;
+			interrupts = <39>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@49036000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49036000 0x400>;
+			interrupts = <40>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@49038000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49038000 0x400>;
+			interrupts = <41>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4903a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4903a000 0x400>;
+			interrupts = <42>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@4903c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4903c000 0x400>;
+			interrupts = <43>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4903e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4903e000 0x400>;
+			interrupts = <44>;
+			ti,hwmods = "timer8";
+			ti,timer-pwm;
+			ti,timer-dsp;
+		};
+
+		timer9: timer@49040000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49040000 0x400>;
+			interrupts = <45>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x400>;
+			interrupts = <46>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x400>;
+			interrupts = <47>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer12: timer@48304000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48304000 0x400>;
+			interrupts = <95>;
+			ti,hwmods = "timer12";
+			ti,timer-alwon;
+			ti,timer-secure;
+		};
 	};
 };

arch/arm/boot/dts/omap4-panda.dts

@@ -184,3 +184,7 @@
 &dmic {
 	status = "disabled";
 };
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};

arch/arm/boot/dts/omap4-sdp.dts

@@ -406,3 +406,7 @@
 &mcbsp3 {
 	status = "disabled";
 };
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};

arch/arm/boot/dts/omap4.dtsi

@@ -95,6 +95,12 @@
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 
+		counter32k: counter@4a304000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4a304000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap4_pmx_core: pinmux@4a100040 {
 			compatible = "ti,omap4-padconf", "pinctrl-single";
 			reg = <0x4a100040 0x0196>;
@@ -340,7 +346,6 @@
 			      <0x49032000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 112 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "mcpdm";
 		};
 
@@ -350,7 +355,6 @@
 			      <0x4902e000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 114 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "dmic";
 		};
 
@@ -361,7 +365,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 17 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -373,7 +376,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 22 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp2";
 		};
@@ -385,7 +387,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 23 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3";
 		};
@@ -396,7 +397,6 @@
 			reg-names = "mpu";
 			interrupts = <0 16 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp4";
 		};
@@ -431,12 +431,103 @@
 			hw-caps-temp-alert;
 		};
 
-		ocp2scp {
+		ocp2scp@4a0ad000 {
 			compatible = "ti,omap-ocp2scp";
+			reg = <0x4a0ad000 0x1f>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 			ti,hwmods = "ocp2scp_usb_phy";
 		};
+
+		timer1: timer@4a318000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4a318000 0x80>;
+			interrupts = <0 37 0x4>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <0 38 0x4>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <0 39 0x4>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <0 40 0x4>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@40138000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x40138000 0x80>,
+			      <0x49038000 0x80>;
+			interrupts = <0 41 0x4>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4013a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013a000 0x80>,
+			      <0x4903a000 0x80>;
+			interrupts = <0 42 0x4>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@4013c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013c000 0x80>,
+			      <0x4903c000 0x80>;
+			interrupts = <0 43 0x4>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4013e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013e000 0x80>,
+			      <0x4903e000 0x80>;
+			interrupts = <0 44 0x4>;
+			ti,hwmods = "timer8";
+			ti,timer-pwm;
+			ti,timer-dsp;
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <0 45 0x4>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <0 46 0x4>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <0 47 0x4>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
 	};
 };

arch/arm/boot/dts/omap5.dtsi

@@ -77,6 +77,12 @@
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 
+		counter32k: counter@4ae04000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4ae04000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap5_pmx_core: pinmux@4a002840 {
 			compatible = "ti,omap4-padconf", "pinctrl-single";
 			reg = <0x4a002840 0x01b6>;
@@ -104,6 +110,8 @@
 
 		gpio1: gpio@4ae10000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4ae10000 0x200>;
+			interrupts = <0 29 0x4>;
 			ti,hwmods = "gpio1";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -113,6 +121,8 @@
 
 		gpio2: gpio@48055000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48055000 0x200>;
+			interrupts = <0 30 0x4>;
 			ti,hwmods = "gpio2";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -122,6 +132,8 @@
 
 		gpio3: gpio@48057000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48057000 0x200>;
+			interrupts = <0 31 0x4>;
 			ti,hwmods = "gpio3";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -131,6 +143,8 @@
 
 		gpio4: gpio@48059000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48059000 0x200>;
+			interrupts = <0 32 0x4>;
 			ti,hwmods = "gpio4";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -140,6 +154,8 @@
 
 		gpio5: gpio@4805b000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4805b000 0x200>;
+			interrupts = <0 33 0x4>;
 			ti,hwmods = "gpio5";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -149,6 +165,8 @@
 
 		gpio6: gpio@4805d000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4805d000 0x200>;
+			interrupts = <0 34 0x4>;
 			ti,hwmods = "gpio6";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -158,6 +176,8 @@
 
 		gpio7: gpio@48051000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48051000 0x200>;
+			interrupts = <0 35 0x4>;
 			ti,hwmods = "gpio7";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -167,6 +187,8 @@
 
 		gpio8: gpio@48053000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48053000 0x200>;
+			interrupts = <0 121 0x4>;
 			ti,hwmods = "gpio8";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -176,6 +198,8 @@
 
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48070000 0x100>;
+			interrupts = <0 56 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
@@ -183,6 +207,8 @@
 
 		i2c2: i2c@48072000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48072000 0x100>;
+			interrupts = <0 57 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
@@ -190,20 +216,26 @@
 
 		i2c3: i2c@48060000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48060000 0x100>;
+			interrupts = <0 61 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 		};
 
-		i2c4: i2c@4807A000 {
+		i2c4: i2c@4807a000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x4807a000 0x100>;
+			interrupts = <0 62 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c4";
 		};
 
-		i2c5: i2c@4807C000 {
+		i2c5: i2c@4807c000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x4807c000 0x100>;
+			interrupts = <0 60 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c5";
@@ -211,42 +243,56 @@
 
 		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806a000 0x100>;
+			interrupts = <0 72 0x4>;
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
 
 		uart2: serial@4806c000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806c000 0x100>;
+			interrupts = <0 73 0x4>;
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
 
 		uart3: serial@48020000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x48020000 0x100>;
+			interrupts = <0 74 0x4>;
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
 
 		uart4: serial@4806e000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806e000 0x100>;
+			interrupts = <0 70 0x4>;
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 		};
 
 		uart5: serial@48066000 {
-			compatible = "ti,omap5-uart";
+			compatible = "ti,omap4-uart";
+			reg = <0x48066000 0x100>;
+			interrupts = <0 105 0x4>;
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 		};
 
 		uart6: serial@48068000 {
-			compatible = "ti,omap6-uart";
+			compatible = "ti,omap4-uart";
+			reg = <0x48068000 0x100>;
+			interrupts = <0 106 0x4>;
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 		};
 
 		mmc1: mmc@4809c000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x4809c000 0x400>;
+			interrupts = <0 83 0x4>;
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
@@ -254,24 +300,32 @@
 
 		mmc2: mmc@480b4000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480b4000 0x400>;
+			interrupts = <0 86 0x4>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
 		};
 
 		mmc3: mmc@480ad000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480ad000 0x400>;
+			interrupts = <0 94 0x4>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
 		};
 
 		mmc4: mmc@480d1000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d1000 0x400>;
+			interrupts = <0 96 0x4>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
 		};
 
 		mmc5: mmc@480d5000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d5000 0x400>;
+			interrupts = <0 59 0x4>;
 			ti,hwmods = "mmc5";
 			ti,needs-special-reset;
 		};
@@ -287,7 +341,6 @@
 			      <0x49032000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 112 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "mcpdm";
 		};
 
@@ -297,7 +350,6 @@
 			      <0x4902e000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 114 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "dmic";
 		};
 
@@ -308,7 +360,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 17 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -320,7 +371,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 22 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp2";
 		};
@@ -332,9 +382,97 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 23 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3";
 		};
+
+		timer1: timer@4ae18000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4ae18000 0x80>;
+			interrupts = <0 37 0x4>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <0 38 0x4>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <0 39 0x4>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <0 40 0x4>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@40138000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x40138000 0x80>,
+			      <0x49038000 0x80>;
+			interrupts = <0 41 0x4>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4013a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013a000 0x80>,
+			      <0x4903a000 0x80>;
+			interrupts = <0 42 0x4>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer7: timer@4013c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013c000 0x80>,
+			      <0x4903c000 0x80>;
+			interrupts = <0 43 0x4>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4013e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013e000 0x80>,
+			      <0x4903e000 0x80>;
+			interrupts = <0 44 0x4>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <0 45 0x4>;
+			ti,hwmods = "timer9";
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <0 46 0x4>;
+			ti,hwmods = "timer10";
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <0 47 0x4>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
 	};
 };

arch/arm/boot/dts/twl4030.dtsi

@@ -37,6 +37,24 @@
 		regulator-max-microvolt = <3150000>;
 	};
 
+	vusb1v5: regulator-vusb1v5 {
+		compatible = "ti,twl4030-vusb1v5";
+	};
+
+	vusb1v8: regulator-vusb1v8 {
+		compatible = "ti,twl4030-vusb1v8";
+	};
+
+	vusb3v1: regulator-vusb3v1 {
+		compatible = "ti,twl4030-vusb3v1";
+	};
+
+	vsim: regulator-vsim {
+		compatible = "ti,twl4030-vsim";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
 	twl_gpio: gpio {
 		compatible = "ti,twl4030-gpio";
 		gpio-controller;
@@ -44,4 +62,13 @@
 		interrupt-controller;
 		#interrupt-cells = <1>;
 	};
+
+	twl4030-usb {
+		compatible = "ti,twl4030-usb";
+		interrupts = <10>, <4>;
+		usb1v5-supply = <&vusb1v5>;
+		usb1v8-supply = <&vusb1v8>;
+		usb3v1-supply = <&vusb3v1>;
+		usb_mode = <1>;
+	};
 };

arch/arm/boot/dts/twl6030.dtsi

@@ -86,4 +86,9 @@
 	clk32kg: regulator-clk32kg {
 		compatible = "ti,twl6030-clk32kg";
 	};
+
+	twl_usb_comparator: usb-comparator {
+		compatible = "ti,twl6030-usb";
+		interrupts = <4>, <10>;
+	};
 };