Merge branch 'suspend' into test

drivers/acpi/hardware/hwsleep.c

@@ -78,19 +78,17 @@ acpi_set_firmware_waking_vector(acpi_physical_address physical_address)
 		return_ACPI_STATUS(status);
 	}
 
-	/* Set the vector */
+	/*
+	 * According to the ACPI specification 2.0c and later, the 64-bit
+	 * waking vector should be cleared and the 32-bit waking vector should
+	 * be used, unless we want the wake-up code to be called by the BIOS in
+	 * Protected Mode.  Some systems (for example HP dv5-1004nr) are known
+	 * to fail to resume if the 64-bit vector is used.
+	 */
+	if (facs->version >= 1)
+		facs->xfirmware_waking_vector = 0;
 
-	if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
-		/*
-		 * ACPI 1.0 FACS or short table or optional X_ field is zero
-		 */
-		facs->firmware_waking_vector = (u32) physical_address;
-	} else {
-		/*
-		 * ACPI 2.0 FACS with valid X_ field
-		 */
-		facs->xfirmware_waking_vector = physical_address;
-	}
+	facs->firmware_waking_vector = (u32)physical_address;
 
 	return_ACPI_STATUS(AE_OK);
 }
@@ -134,20 +132,7 @@ acpi_get_firmware_waking_vector(acpi_physical_address * physical_address)
 	}
 
 	/* Get the vector */
-
-	if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
-		/*
-		 * ACPI 1.0 FACS or short table or optional X_ field is zero
-		 */
-		*physical_address =
-		    (acpi_physical_address) facs->firmware_waking_vector;
-	} else {
-		/*
-		 * ACPI 2.0 FACS with valid X_ field
-		 */
-		*physical_address =
-		    (acpi_physical_address) facs->xfirmware_waking_vector;
-	}
+	*physical_address = (acpi_physical_address)facs->firmware_waking_vector;
 
 	return_ACPI_STATUS(AE_OK);
 }
@@ -627,6 +612,13 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state)
 	}
 	/* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */
 
+	/*
+	 * Some BIOSes assume that WAK_STS will be cleared on resume and use
+	 * it to determine whether the system is rebooting or resuming. Clear
+	 * it for compatibility.
+	 */
+	acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1);
+
 	acpi_gbl_system_awake_and_running = TRUE;
 
 	/* Enable power button */

drivers/acpi/sleep/main.c

@@ -15,6 +15,7 @@
 #include <linux/dmi.h>
 #include <linux/device.h>
 #include <linux/suspend.h>
+#include <linux/reboot.h>
 
 #include <asm/io.h>
 
@@ -25,6 +26,36 @@
 u8 sleep_states[ACPI_S_STATE_COUNT];
 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
 
+static void acpi_sleep_tts_switch(u32 acpi_state)
+{
+	union acpi_object in_arg = { ACPI_TYPE_INTEGER };
+	struct acpi_object_list arg_list = { 1, &in_arg };
+	acpi_status status = AE_OK;
+
+	in_arg.integer.value = acpi_state;
+	status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL);
+	if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+		/*
+		 * OS can't evaluate the _TTS object correctly. Some warning
+		 * message will be printed. But it won't break anything.
+		 */
+		printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
+	}
+}
+
+static int tts_notify_reboot(struct notifier_block *this,
+			unsigned long code, void *x)
+{
+	acpi_sleep_tts_switch(ACPI_STATE_S5);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block tts_notifier = {
+	.notifier_call	= tts_notify_reboot,
+	.next		= NULL,
+	.priority	= 0,
+};
+
 static int acpi_sleep_prepare(u32 acpi_state)
 {
 #ifdef CONFIG_ACPI_SLEEP
@@ -130,6 +161,7 @@ static void acpi_pm_end(void)
 	 * failing transition to a sleep state.
 	 */
 	acpi_target_sleep_state = ACPI_STATE_S0;
+	acpi_sleep_tts_switch(acpi_target_sleep_state);
 }
 #endif /* CONFIG_ACPI_SLEEP */
 
@@ -154,6 +186,7 @@ static int acpi_suspend_begin(suspend_state_t pm_state)
 
 	if (sleep_states[acpi_state]) {
 		acpi_target_sleep_state = acpi_state;
+		acpi_sleep_tts_switch(acpi_target_sleep_state);
 	} else {
 		printk(KERN_ERR "ACPI does not support this state: %d\n",
 			pm_state);
@@ -199,6 +232,8 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
 		break;
 	}
 
+	/* If ACPI is not enabled by the BIOS, we need to enable it here. */
+	acpi_enable();
 	/* Reprogram control registers and execute _BFS */
 	acpi_leave_sleep_state_prep(acpi_state);
 
@@ -295,6 +330,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 		DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
 		},
 	},
+	{
+	.callback = init_old_suspend_ordering,
+	.ident = "HP xw4600 Workstation",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
+		},
+	},
 	{},
 };
 #endif /* CONFIG_SUSPEND */
@@ -312,6 +355,7 @@ void __init acpi_no_s4_hw_signature(void)
 static int acpi_hibernation_begin(void)
 {
 	acpi_target_sleep_state = ACPI_STATE_S4;
+	acpi_sleep_tts_switch(acpi_target_sleep_state);
 	return 0;
 }
 
@@ -375,7 +419,15 @@ static struct platform_hibernation_ops acpi_hibernation_ops = {
  */
 static int acpi_hibernation_begin_old(void)
 {
-	int error = acpi_sleep_prepare(ACPI_STATE_S4);
+	int error;
+	/*
+	 * The _TTS object should always be evaluated before the _PTS object.
+	 * When the old_suspended_ordering is true, the _PTS object is
+	 * evaluated in the acpi_sleep_prepare.
+	 */
+	acpi_sleep_tts_switch(ACPI_STATE_S4);
+
+	error = acpi_sleep_prepare(ACPI_STATE_S4);
 
 	if (!error)
 		acpi_target_sleep_state = ACPI_STATE_S4;
@@ -595,5 +647,10 @@ int __init acpi_sleep_init(void)
 		pm_power_off = acpi_power_off;
 	}
 	printk(")\n");
+	/*
+	 * Register the tts_notifier to reboot notifier list so that the _TTS
+	 * object can also be evaluated when the system enters S5.
+	 */
+	register_reboot_notifier(&tts_notifier);
 	return 0;
 }