Merge tag 'asoc-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: More updates for v3.11

Some more fixes and enhancements, and also a bunch of refectoring for
AC'97 support which enables more than one AC'97 controller driver to be
built in.

Documentation/DocBook/media/v4l/dev-codec.xml

@@ -1,18 +1,27 @@
   <title>Codec Interface</title>
 
-  <note>
-    <title>Suspended</title>
+  <para>A V4L2 codec can compress, decompress, transform, or otherwise
+convert video data from one format into another format, in memory. Typically
+such devices are memory-to-memory devices (i.e. devices with the
+<constant>V4L2_CAP_VIDEO_M2M</constant> or <constant>V4L2_CAP_VIDEO_M2M_MPLANE</constant>
+capability set).
+</para>
 
-    <para>This interface has been be suspended from the V4L2 API
-implemented in Linux 2.6 until we have more experience with codec
-device interfaces.</para>
-  </note>
+  <para>A memory-to-memory video node acts just like a normal video node, but it
+supports both output (sending frames from memory to the codec hardware) and
+capture (receiving the processed frames from the codec hardware into memory)
+stream I/O. An application will have to setup the stream
+I/O for both sides and finally call &VIDIOC-STREAMON; for both capture and output
+to start the codec.</para>
 
-  <para>A V4L2 codec can compress, decompress, transform, or otherwise
-convert video data from one format into another format, in memory.
-Applications send data to be converted to the driver through a
-&func-write; call, and receive the converted data through a
-&func-read; call. For efficiency a driver may also support streaming
-I/O.</para>
+  <para>Video compression codecs use the MPEG controls to setup their codec parameters
+(note that the MPEG controls actually support many more codecs than just MPEG).
+See <xref linkend="mpeg-controls"></xref>.</para>
 
-  <para>[to do]</para>
+  <para>Memory-to-memory devices can often be used as a shared resource: you can
+open the video node multiple times, each application setting up their own codec properties
+that are local to the file handle, and each can use it independently from the others.
+The driver will arbitrate access to the codec and reprogram it whenever another file
+handler gets access. This is different from the usual video node behavior where the video properties
+are global to the device (i.e. changing something through one file handle is visible
+through another file handle).</para>

Documentation/DocBook/media/v4l/v4l2.xml

@@ -493,7 +493,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 3.9</subtitle>
+ <subtitle>Revision 3.10</subtitle>
 
   <chapter id="common">
     &sub-common;

Documentation/devicetree/bindings/media/exynos-fimc-lite.txt

@@ -2,7 +2,7 @@ Exynos4x12/Exynos5 SoC series camera host interface (FIMC-LITE)
 
 Required properties:
 
-- compatible	: should be "samsung,exynos4212-fimc" for Exynos4212 and
+- compatible	: should be "samsung,exynos4212-fimc-lite" for Exynos4212 and
 		  Exynos4412 SoCs;
 - reg		: physical base address and size of the device memory mapped
 		  registers;

Documentation/devicetree/bindings/sound/adi,adau1701.txt

@@ -11,6 +11,15 @@ Optional properties:
  - reset-gpio: 		A GPIO spec to define which pin is connected to the
 			chip's !RESET pin. If specified, the driver will
 			assert a hardware reset at probe time.
+ - adi,pll-mode-gpios:	An array of two GPIO specs to describe the GPIOs
+			the ADAU's PLL config pins are connected to.
+			The state of the pins are set according to the
+			configured clock divider on ASoC side before the
+			firmware is loaded.
+ - adi,pin-config:	An array of 12 numerical values selecting one of the
+			pin configurations as described in the datasheet,
+			table 53. Note that the value of this property has
+			to be prefixed with '/bits/ 8'.
 
 Examples:
 
@@ -19,5 +28,8 @@ Examples:
 			compatible = "adi,adau1701";
 			reg = <0x34>;
 			reset-gpio = <&gpio 23 0>;
+			adi,pll-mode-gpios = <&gpio 24 0 &gpio 25 0>;
+			adi,pin-config = /bits/ 8 <0x4 0x7 0x5 0x5 0x4 0x4
+                                                   0x4 0x4 0x4 0x4 0x4 0x4>;
 		};
 	};

Documentation/devicetree/bindings/sound/ti,tas5086.txt

@@ -20,6 +20,17 @@ Optional properties:
 			When not specified, the hardware default of 1300ms
 			is retained.
 
+ - ti,mid-z-channel-X:	Boolean properties, X being a number from 1 to 6.
+			If given, channel X will start with the Mid-Z start
+			sequence, otherwise the default Low-Z scheme is used.
+
+			The correct configuration depends on how the power
+			stages connected to the PWM output pins work. Not all
+			power stages are compatible to Mid-Z - please refer
+			to the datasheets for more details.
+
+			Most systems should not set any of these properties.
+
 Examples:
 
 	i2c_bus {

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -1189,6 +1189,16 @@ config PL310_ERRATA_588369
 	   is not correctly implemented in PL310 as clean lines are not
 	   invalidated as a result of these operations.
 
+config ARM_ERRATA_643719
+	bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for the 643719 Cortex-A9 (prior to
+	  r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR
+	  register returns zero when it should return one. The workaround
+	  corrects this value, ensuring cache maintenance operations which use
+	  it behave as intended and avoiding data corruption.
+
 config ARM_ERRATA_720789
 	bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
 	depends on CPU_V7
@@ -2006,7 +2016,7 @@ config XIP_PHYS_ADDR
 
 config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
-	depends on (!SMP || HOTPLUG_CPU)
+	depends on (!SMP || PM_SLEEP_SMP)
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot

arch/arm/boot/compressed/Makefile

@@ -116,7 +116,8 @@ targets       := vmlinux vmlinux.lds \
 
 # Make sure files are removed during clean
 extra-y       += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern \
-		 lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs)
+		 lib1funcs.S ashldi3.S $(libfdt) $(libfdt_hdrs) \
+		 hyp-stub.S
 
 ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)

arch/arm/boot/dts/exynos5250-pinctrl.dtsi

@@ -763,7 +763,7 @@
 		};
 	};
 
-	pinctrl@03680000 {
+	pinctrl@03860000 {
 		gpz: gpz {
 			gpio-controller;
 			#gpio-cells = <2>;

arch/arm/boot/dts/exynos5250.dtsi

@@ -161,9 +161,9 @@
 		interrupts = <0 50 0>;
 	};
 
-	pinctrl_3: pinctrl@03680000 {
+	pinctrl_3: pinctrl@03860000 {
 		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x0368000 0x1000>;
+		reg = <0x03860000 0x1000>;
 		interrupts = <0 47 0>;
 	};
 

arch/arm/include/asm/cacheflush.h

@@ -320,9 +320,7 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
 }
 
 #define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
-static inline void flush_kernel_dcache_page(struct page *page)
-{
-}
+extern void flush_kernel_dcache_page(struct page *);
 
 #define flush_dcache_mmap_lock(mapping) \
 	spin_lock_irq(&(mapping)->tree_lock)

arch/arm/kernel/machine_kexec.c

@@ -134,6 +134,10 @@ void machine_kexec(struct kimage *image)
 	unsigned long reboot_code_buffer_phys;
 	void *reboot_code_buffer;
 
+	if (num_online_cpus() > 1) {
+		pr_err("kexec: error: multiple CPUs still online\n");
+		return;
+	}
 
 	page_list = image->head & PAGE_MASK;
 

arch/arm/kernel/process.c

@@ -184,30 +184,61 @@ int __init reboot_setup(char *str)
 
 __setup("reboot=", reboot_setup);
 
+/*
+ * Called by kexec, immediately prior to machine_kexec().
+ *
+ * This must completely disable all secondary CPUs; simply causing those CPUs
+ * to execute e.g. a RAM-based pin loop is not sufficient. This allows the
+ * kexec'd kernel to use any and all RAM as it sees fit, without having to
+ * avoid any code or data used by any SW CPU pin loop. The CPU hotplug
+ * functionality embodied in disable_nonboot_cpus() to achieve this.
+ */
 void machine_shutdown(void)
 {
-#ifdef CONFIG_SMP
-	smp_send_stop();
-#endif
+	disable_nonboot_cpus();
 }
 
+/*
+ * Halting simply requires that the secondary CPUs stop performing any
+ * activity (executing tasks, handling interrupts). smp_send_stop()
+ * achieves this.
+ */
 void machine_halt(void)
 {
-	machine_shutdown();
+	smp_send_stop();
+
 	local_irq_disable();
 	while (1);
 }
 
+/*
+ * Power-off simply requires that the secondary CPUs stop performing any
+ * activity (executing tasks, handling interrupts). smp_send_stop()
+ * achieves this. When the system power is turned off, it will take all CPUs
+ * with it.
+ */
 void machine_power_off(void)
 {
-	machine_shutdown();
+	smp_send_stop();
+
 	if (pm_power_off)
 		pm_power_off();
 }
 
+/*
+ * Restart requires that the secondary CPUs stop performing any activity
+ * while the primary CPU resets the system. Systems with a single CPU can
+ * use soft_restart() as their machine descriptor's .restart hook, since that
+ * will cause the only available CPU to reset. Systems with multiple CPUs must
+ * provide a HW restart implementation, to ensure that all CPUs reset at once.
+ * This is required so that any code running after reset on the primary CPU
+ * doesn't have to co-ordinate with other CPUs to ensure they aren't still
+ * executing pre-reset code, and using RAM that the primary CPU's code wishes
+ * to use. Implementing such co-ordination would be essentially impossible.
+ */
 void machine_restart(char *cmd)
 {
-	machine_shutdown();
+	smp_send_stop();
 
 	arm_pm_restart(reboot_mode, cmd);
 

arch/arm/kernel/smp.c

@@ -651,17 +651,6 @@ void smp_send_reschedule(int cpu)
 	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
-static void smp_kill_cpus(cpumask_t *mask)
-{
-	unsigned int cpu;
-	for_each_cpu(cpu, mask)
-		platform_cpu_kill(cpu);
-}
-#else
-static void smp_kill_cpus(cpumask_t *mask) { }
-#endif
-
 void smp_send_stop(void)
 {
 	unsigned long timeout;
@@ -679,8 +668,6 @@ void smp_send_stop(void)
 
 	if (num_online_cpus() > 1)
 		pr_warning("SMP: failed to stop secondary CPUs\n");
-
-	smp_kill_cpus(&mask);
 }
 
 /*

arch/arm/mm/cache-v7.S

@@ -92,6 +92,14 @@ ENTRY(v7_flush_dcache_louis)
 	mrc	p15, 1, r0, c0, c0, 1		@ read clidr, r0 = clidr
 	ALT_SMP(ands	r3, r0, #(7 << 21))	@ extract LoUIS from clidr
 	ALT_UP(ands	r3, r0, #(7 << 27))	@ extract LoUU from clidr
+#ifdef CONFIG_ARM_ERRATA_643719
+	ALT_SMP(mrceq	p15, 0, r2, c0, c0, 0)	@ read main ID register
+	ALT_UP(moveq	pc, lr)			@ LoUU is zero, so nothing to do
+	ldreq	r1, =0x410fc090                 @ ID of ARM Cortex A9 r0p?
+	biceq	r2, r2, #0x0000000f             @ clear minor revision number
+	teqeq	r2, r1                          @ test for errata affected core and if so...
+	orreqs	r3, #(1 << 21)			@   fix LoUIS value (and set flags state to 'ne')
+#endif
 	ALT_SMP(mov	r3, r3, lsr #20)	@ r3 = LoUIS * 2
 	ALT_UP(mov	r3, r3, lsr #26)	@ r3 = LoUU * 2
 	moveq	pc, lr				@ return if level == 0

arch/arm/mm/flush.c

@@ -300,6 +300,39 @@ void flush_dcache_page(struct page *page)
 }
 EXPORT_SYMBOL(flush_dcache_page);
 
+/*
+ * Ensure cache coherency for the kernel mapping of this page. We can
+ * assume that the page is pinned via kmap.
+ *
+ * If the page only exists in the page cache and there are no user
+ * space mappings, this is a no-op since the page was already marked
+ * dirty at creation.  Otherwise, we need to flush the dirty kernel
+ * cache lines directly.
+ */
+void flush_kernel_dcache_page(struct page *page)
+{
+	if (cache_is_vivt() || cache_is_vipt_aliasing()) {
+		struct address_space *mapping;
+
+		mapping = page_mapping(page);
+
+		if (!mapping || mapping_mapped(mapping)) {
+			void *addr;
+
+			addr = page_address(page);
+			/*
+			 * kmap_atomic() doesn't set the page virtual
+			 * address for highmem pages, and
+			 * kunmap_atomic() takes care of cache
+			 * flushing already.
+			 */
+			if (!IS_ENABLED(CONFIG_HIGHMEM) || addr)
+				__cpuc_flush_dcache_area(addr, PAGE_SIZE);
+		}
+	}
+}
+EXPORT_SYMBOL(flush_kernel_dcache_page);
+
 /*
  * Flush an anonymous page so that users of get_user_pages()
  * can safely access the data.  The expected sequence is:

arch/arm/mm/mmu.c

@@ -616,10 +616,12 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 }
 
-static void __init map_init_section(pmd_t *pmd, unsigned long addr,
+static void __init __map_init_section(pmd_t *pmd, unsigned long addr,
 			unsigned long end, phys_addr_t phys,
 			const struct mem_type *type)
 {
+	pmd_t *p = pmd;
+
 #ifndef CONFIG_ARM_LPAE
 	/*
 	 * In classic MMU format, puds and pmds are folded in to
@@ -638,7 +640,7 @@ static void __init map_init_section(pmd_t *pmd, unsigned long addr,
 		phys += SECTION_SIZE;
 	} while (pmd++, addr += SECTION_SIZE, addr != end);
 
-	flush_pmd_entry(pmd);
+	flush_pmd_entry(p);
 }
 
 static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
@@ -661,7 +663,7 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
 		 */
 		if (type->prot_sect &&
 				((addr | next | phys) & ~SECTION_MASK) == 0) {
-			map_init_section(pmd, addr, next, phys, type);
+			__map_init_section(pmd, addr, next, phys, type);
 		} else {
 			alloc_init_pte(pmd, addr, next,
 						__phys_to_pfn(phys), type);

arch/arm/mm/proc-v7.S

@@ -409,8 +409,8 @@ __v7_ca9mp_proc_info:
 	 */
 	.type   __v7_pj4b_proc_info, #object
 __v7_pj4b_proc_info:
-	.long	0x562f5840
-	.long	0xfffffff0
+	.long	0x560f5800
+	.long	0xff0fff00
 	__v7_proc __v7_pj4b_setup
 	.size	__v7_pj4b_proc_info, . - __v7_pj4b_proc_info
 

arch/arm64/kernel/perf_event.c

@@ -1336,6 +1336,7 @@ void perf_callchain_user(struct perf_callchain_entry *entry,
 		return;
 	}
 
+	perf_callchain_store(entry, regs->pc);
 	tail = (struct frame_tail __user *)regs->regs[29];
 
 	while (entry->nr < PERF_MAX_STACK_DEPTH &&

arch/ia64/include/asm/irqflags.h

@@ -11,6 +11,7 @@
 #define _ASM_IA64_IRQFLAGS_H
 
 #include <asm/pal.h>
+#include <asm/kregs.h>
 
 #ifdef CONFIG_IA64_DEBUG_IRQ
 extern unsigned long last_cli_ip;

arch/metag/include/asm/hugetlb.h

@@ -2,6 +2,7 @@
 #define _ASM_METAG_HUGETLB_H
 
 #include <asm/page.h>
+#include <asm-generic/hugetlb.h>
 
 
 static inline int is_hugepage_only_range(struct mm_struct *mm,

arch/mn10300/include/asm/irqflags.h

@@ -13,9 +13,8 @@
 #define _ASM_IRQFLAGS_H
 
 #include <asm/cpu-regs.h>
-#ifndef __ASSEMBLY__
-#include <linux/smp.h>
-#endif
+/* linux/smp.h <- linux/irqflags.h needs asm/smp.h first */
+#include <asm/smp.h>
 
 /*
  * interrupt control

arch/mn10300/include/asm/smp.h

@@ -24,6 +24,7 @@
 #ifndef __ASSEMBLY__
 #include <linux/threads.h>
 #include <linux/cpumask.h>
+#include <linux/thread_info.h>
 #endif
 
 #ifdef CONFIG_SMP
@@ -85,7 +86,7 @@ extern cpumask_t cpu_boot_map;
 extern void smp_init_cpus(void);
 extern void smp_cache_interrupt(void);
 extern void send_IPI_allbutself(int irq);
-extern int smp_nmi_call_function(smp_call_func_t func, void *info, int wait);
+extern int smp_nmi_call_function(void (*func)(void *), void *info, int wait);
 
 extern void arch_send_call_function_single_ipi(int cpu);
 extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
@@ -100,6 +101,7 @@ extern void __cpu_die(unsigned int cpu);
 #ifndef __ASSEMBLY__
 
 static inline void smp_init_cpus(void) {}
+#define raw_smp_processor_id() 0
 
 #endif /* __ASSEMBLY__ */
 #endif /* CONFIG_SMP */

arch/parisc/include/asm/mmzone.h

@@ -27,7 +27,7 @@ extern struct node_map_data node_data[];
 
 #define PFNNID_SHIFT (30 - PAGE_SHIFT)
 #define PFNNID_MAP_MAX  512     /* support 512GB */
-extern unsigned char pfnnid_map[PFNNID_MAP_MAX];
+extern signed char pfnnid_map[PFNNID_MAP_MAX];
 
 #ifndef CONFIG_64BIT
 #define pfn_is_io(pfn) ((pfn & (0xf0000000UL >> PAGE_SHIFT)) == (0xf0000000UL >> PAGE_SHIFT))
@@ -46,7 +46,7 @@ static inline int pfn_to_nid(unsigned long pfn)
 	i = pfn >> PFNNID_SHIFT;
 	BUG_ON(i >= ARRAY_SIZE(pfnnid_map));
 
-	return (int)pfnnid_map[i];
+	return pfnnid_map[i];
 }
 
 static inline int pfn_valid(int pfn)

arch/parisc/include/asm/pci.h

@@ -225,4 +225,9 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
 	return channel ? 15 : 14;
 }
 
+#define HAVE_PCI_MMAP
+
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+	enum pci_mmap_state mmap_state, int write_combine);
+
 #endif /* __ASM_PARISC_PCI_H */

arch/parisc/kernel/hardware.c

@@ -1205,6 +1205,7 @@ static struct hp_hardware hp_hardware_list[] = {
 	{HPHW_FIO, 0x004, 0x00320, 0x0, "Metheus Frame Buffer"}, 
 	{HPHW_FIO, 0x004, 0x00340, 0x0, "BARCO CX4500 VME Grphx Cnsl"}, 
 	{HPHW_FIO, 0x004, 0x00360, 0x0, "Hughes TOG VME FDDI"}, 
+	{HPHW_FIO, 0x076, 0x000AD, 0x00, "Crestone Peak RS-232"},
 	{HPHW_IOA, 0x185, 0x0000B, 0x00, "Java BC Summit Port"}, 
 	{HPHW_IOA, 0x1FF, 0x0000B, 0x00, "Hitachi Ghostview Summit Port"}, 
 	{HPHW_IOA, 0x580, 0x0000B, 0x10, "U2-IOA BC Runway Port"}, 

arch/parisc/kernel/pacache.S

@@ -860,7 +860,7 @@ ENTRY(flush_dcache_page_asm)
 #endif
 
 	ldil		L%dcache_stride, %r1
-	ldw		R%dcache_stride(%r1), %r1
+	ldw		R%dcache_stride(%r1), r31
 
 #ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r25
@@ -868,26 +868,26 @@ ENTRY(flush_dcache_page_asm)
 	depwi,z		1, 31-PAGE_SHIFT,1, %r25
 #endif
 	add		%r28, %r25, %r25
-	sub		%r25, %r1, %r25
-
-
-1:      fdc,m		%r1(%r28)
-	fdc,m		%r1(%r28)
-	fdc,m		%r1(%r28)
-	fdc,m		%r1(%r28)
-	fdc,m		%r1(%r28)
-	fdc,m		%r1(%r28)
-	fdc,m		%r1(%r28)
-	fdc,m		%r1(%r28)
-	fdc,m		%r1(%r28)
-	fdc,m		%r1(%r28)
-	fdc,m		%r1(%r28)
-	fdc,m		%r1(%r28)
-	fdc,m		%r1(%r28)
-	fdc,m		%r1(%r28)
-	fdc,m		%r1(%r28)
+	sub		%r25, r31, %r25
+
+
+1:      fdc,m		r31(%r28)
+	fdc,m		r31(%r28)
+	fdc,m		r31(%r28)
+	fdc,m		r31(%r28)
+	fdc,m		r31(%r28)
+	fdc,m		r31(%r28)
+	fdc,m		r31(%r28)
+	fdc,m		r31(%r28)
+	fdc,m		r31(%r28)
+	fdc,m		r31(%r28)
+	fdc,m		r31(%r28)
+	fdc,m		r31(%r28)
+	fdc,m		r31(%r28)
+	fdc,m		r31(%r28)
+	fdc,m		r31(%r28)
 	cmpb,COND(<<)		%r28, %r25,1b
-	fdc,m		%r1(%r28)
+	fdc,m		r31(%r28)
 
 	sync
 
@@ -936,7 +936,7 @@ ENTRY(flush_icache_page_asm)
 #endif
 
 	ldil		L%icache_stride, %r1
-	ldw		R%icache_stride(%r1), %r1
+	ldw		R%icache_stride(%r1), %r31
 
 #ifdef CONFIG_64BIT
 	depdi,z		1, 63-PAGE_SHIFT,1, %r25
@@ -944,28 +944,28 @@ ENTRY(flush_icache_page_asm)
 	depwi,z		1, 31-PAGE_SHIFT,1, %r25
 #endif
 	add		%r28, %r25, %r25
-	sub		%r25, %r1, %r25
+	sub		%r25, %r31, %r25
 
 
 	/* fic only has the type 26 form on PA1.1, requiring an
 	 * explicit space specification, so use %sr4 */
-1:      fic,m		%r1(%sr4,%r28)
-	fic,m		%r1(%sr4,%r28)
-	fic,m		%r1(%sr4,%r28)
-	fic,m		%r1(%sr4,%r28)
-	fic,m		%r1(%sr4,%r28)
-	fic,m		%r1(%sr4,%r28)
-	fic,m		%r1(%sr4,%r28)
-	fic,m		%r1(%sr4,%r28)
-	fic,m		%r1(%sr4,%r28)
-	fic,m		%r1(%sr4,%r28)
-	fic,m		%r1(%sr4,%r28)
-	fic,m		%r1(%sr4,%r28)
-	fic,m		%r1(%sr4,%r28)
-	fic,m		%r1(%sr4,%r28)
-	fic,m		%r1(%sr4,%r28)
+1:      fic,m		%r31(%sr4,%r28)
+	fic,m		%r31(%sr4,%r28)
+	fic,m		%r31(%sr4,%r28)
+	fic,m		%r31(%sr4,%r28)
+	fic,m		%r31(%sr4,%r28)
+	fic,m		%r31(%sr4,%r28)
+	fic,m		%r31(%sr4,%r28)
+	fic,m		%r31(%sr4,%r28)
+	fic,m		%r31(%sr4,%r28)
+	fic,m		%r31(%sr4,%r28)
+	fic,m		%r31(%sr4,%r28)
+	fic,m		%r31(%sr4,%r28)
+	fic,m		%r31(%sr4,%r28)
+	fic,m		%r31(%sr4,%r28)
+	fic,m		%r31(%sr4,%r28)
 	cmpb,COND(<<)	%r28, %r25,1b
-	fic,m		%r1(%sr4,%r28)
+	fic,m		%r31(%sr4,%r28)
 
 	sync
 

arch/parisc/kernel/pci.c

@@ -220,6 +220,33 @@ resource_size_t pcibios_align_resource(void *data, const struct resource *res,
 }
 
 
+int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine)
+{
+	unsigned long prot;
+
+	/*
+	 * I/O space can be accessed via normal processor loads and stores on
+	 * this platform but for now we elect not to do this and portable
+	 * drivers should not do this anyway.
+	 */
+	if (mmap_state == pci_mmap_io)
+		return -EINVAL;
+
+	if (write_combine)
+		return -EINVAL;
+
+	/*
+	 * Ignore write-combine; for now only return uncached mappings.
+	 */
+	prot = pgprot_val(vma->vm_page_prot);
+	prot |= _PAGE_NO_CACHE;
+	vma->vm_page_prot = __pgprot(prot);
+
+	return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
+		vma->vm_end - vma->vm_start, vma->vm_page_prot);
+}
+
 /*
  * A driver is enabling the device.  We make sure that all the appropriate
  * bits are set to allow the device to operate as the driver is expecting.

arch/parisc/mm/init.c

@@ -47,7 +47,7 @@ pte_t pg0[PT_INITIAL * PTRS_PER_PTE] __attribute__ ((__section__ (".data..vm0.pt
 
 #ifdef CONFIG_DISCONTIGMEM
 struct node_map_data node_data[MAX_NUMNODES] __read_mostly;
-unsigned char pfnnid_map[PFNNID_MAP_MAX] __read_mostly;
+signed char pfnnid_map[PFNNID_MAP_MAX] __read_mostly;
 #endif
 
 static struct resource data_resource = {

arch/powerpc/kvm/booke.c

@@ -673,7 +673,6 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 		ret = s;
 		goto out;
 	}
-	kvmppc_lazy_ee_enable();
 
 	kvm_guest_enter();
 
@@ -699,6 +698,8 @@ int kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	kvmppc_load_guest_fp(vcpu);
 #endif
 
+	kvmppc_lazy_ee_enable();
+
 	ret = __kvmppc_vcpu_run(kvm_run, vcpu);
 
 	/* No need for kvm_guest_exit. It's done in handle_exit.

arch/powerpc/mm/hugetlbpage.c

@@ -592,8 +592,14 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 	do {
 		pmd = pmd_offset(pud, addr);
 		next = pmd_addr_end(addr, end);
-		if (pmd_none_or_clear_bad(pmd))
+		if (!is_hugepd(pmd)) {
+			/*
+			 * if it is not hugepd pointer, we should already find
+			 * it cleared.
+			 */
+			WARN_ON(!pmd_none_or_clear_bad(pmd));
 			continue;
+		}
 #ifdef CONFIG_PPC_FSL_BOOK3E
 		/*
 		 * Increment next by the size of the huge mapping since

arch/sparc/include/asm/Kbuild

@@ -6,6 +6,7 @@ generic-y += cputime.h
 generic-y += div64.h
 generic-y += emergency-restart.h
 generic-y += exec.h
+generic-y += linkage.h
 generic-y += local64.h
 generic-y += mutex.h
 generic-y += irq_regs.h

arch/sparc/include/asm/leon.h

@@ -135,7 +135,7 @@ static inline int sparc_leon3_cpuid(void)
 
 #ifdef CONFIG_SMP
 # define LEON3_IRQ_IPI_DEFAULT		13
-# define LEON3_IRQ_TICKER		(leon3_ticker_irq)
+# define LEON3_IRQ_TICKER		(leon3_gptimer_irq)
 # define LEON3_IRQ_CROSS_CALL		15
 #endif
 

arch/sparc/include/asm/leon_amba.h

@@ -47,6 +47,7 @@ struct amba_prom_registers {
 #define LEON3_GPTIMER_LD 4
 #define LEON3_GPTIMER_IRQEN 8
 #define LEON3_GPTIMER_SEPIRQ 8
+#define LEON3_GPTIMER_TIMERS 0x7
 
 #define LEON23_REG_TIMER_CONTROL_EN    0x00000001 /* 1 = enable counting */
 /* 0 = hold scalar and counter */

arch/sparc/include/asm/linkage.h

@@ -1,6 +0,0 @@
-#ifndef __ASM_LINKAGE_H
-#define __ASM_LINKAGE_H
-
-/* Nothing to see here... */
-
-#endif

arch/sparc/kernel/ds.c

@@ -843,7 +843,8 @@ void ldom_reboot(const char *boot_command)
 		unsigned long len;
 
 		strcpy(full_boot_str, "boot ");
-		strcpy(full_boot_str + strlen("boot "), boot_command);
+		strlcpy(full_boot_str + strlen("boot "), boot_command,
+			sizeof(full_boot_str + strlen("boot ")));
 		len = strlen(full_boot_str);
 
 		if (reboot_data_supported) {

arch/sparc/kernel/leon_kernel.c

@@ -38,7 +38,6 @@ static DEFINE_SPINLOCK(leon_irq_lock);
 
 unsigned long leon3_gptimer_irq; /* interrupt controller irq number */
 unsigned long leon3_gptimer_idx; /* Timer Index (0..6) within Timer Core */
-int leon3_ticker_irq; /* Timer ticker IRQ */
 unsigned int sparc_leon_eirq;
 #define LEON_IMASK(cpu) (&leon3_irqctrl_regs->mask[cpu])
 #define LEON_IACK (&leon3_irqctrl_regs->iclear)
@@ -278,6 +277,9 @@ irqreturn_t leon_percpu_timer_ce_interrupt(int irq, void *unused)
 
 	leon_clear_profile_irq(cpu);
 
+	if (cpu == boot_cpu_id)
+		timer_interrupt(irq, NULL);
+
 	ce = &per_cpu(sparc32_clockevent, cpu);
 
 	irq_enter();
@@ -299,6 +301,7 @@ void __init leon_init_timers(void)
 	int icsel;
 	int ampopts;
 	int err;
+	u32 config;
 
 	sparc_config.get_cycles_offset = leon_cycles_offset;
 	sparc_config.cs_period = 1000000 / HZ;
@@ -377,23 +380,6 @@ void __init leon_init_timers(void)
 	LEON3_BYPASS_STORE_PA(
 			&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl, 0);
 
-#ifdef CONFIG_SMP
-	leon3_ticker_irq = leon3_gptimer_irq + 1 + leon3_gptimer_idx;
-
-	if (!(LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config) &
-	      (1<<LEON3_GPTIMER_SEPIRQ))) {
-		printk(KERN_ERR "timer not configured with separate irqs\n");
-		BUG();
-	}
-
-	LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].val,
-				0);
-	LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].rld,
-				(((1000000/HZ) - 1)));
-	LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].ctrl,
-				0);
-#endif
-
 	/*
 	 * The IRQ controller may (if implemented) consist of multiple
 	 * IRQ controllers, each mapped on a 4Kb boundary.
@@ -416,13 +402,6 @@ void __init leon_init_timers(void)
 	if (eirq != 0)
 		leon_eirq_setup(eirq);
 
-	irq = _leon_build_device_irq(NULL, leon3_gptimer_irq+leon3_gptimer_idx);
-	err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL);
-	if (err) {
-		printk(KERN_ERR "unable to attach timer IRQ%d\n", irq);
-		prom_halt();
-	}
-
 #ifdef CONFIG_SMP
 	{
 		unsigned long flags;
@@ -439,30 +418,31 @@ void __init leon_init_timers(void)
 	}
 #endif
 
-	LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl,
-			      LEON3_GPTIMER_EN |
-			      LEON3_GPTIMER_RL |
-			      LEON3_GPTIMER_LD |
-			      LEON3_GPTIMER_IRQEN);
+	config = LEON3_BYPASS_LOAD_PA(&leon3_gptimer_regs->config);
+	if (config & (1 << LEON3_GPTIMER_SEPIRQ))
+		leon3_gptimer_irq += leon3_gptimer_idx;
+	else if ((config & LEON3_GPTIMER_TIMERS) > 1)
+		pr_warn("GPTIMER uses shared irqs, using other timers of the same core will fail.\n");
 
 #ifdef CONFIG_SMP
 	/* Install per-cpu IRQ handler for broadcasted ticker */
-	irq = leon_build_device_irq(leon3_ticker_irq, handle_percpu_irq,
+	irq = leon_build_device_irq(leon3_gptimer_irq, handle_percpu_irq,
 				    "per-cpu", 0);
 	err = request_irq(irq, leon_percpu_timer_ce_interrupt,
-			  IRQF_PERCPU | IRQF_TIMER, "ticker",
-			  NULL);
+			  IRQF_PERCPU | IRQF_TIMER, "timer", NULL);
+#else
+	irq = _leon_build_device_irq(NULL, leon3_gptimer_irq);
+	err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL);
+#endif
 	if (err) {
-		printk(KERN_ERR "unable to attach ticker IRQ%d\n", irq);
+		pr_err("Unable to attach timer IRQ%d\n", irq);
 		prom_halt();
 	}
-
-	LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx+1].ctrl,
+	LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[leon3_gptimer_idx].ctrl,
 			      LEON3_GPTIMER_EN |
 			      LEON3_GPTIMER_RL |
 			      LEON3_GPTIMER_LD |
 			      LEON3_GPTIMER_IRQEN);
-#endif
 	return;
 bad:
 	printk(KERN_ERR "No Timer/irqctrl found\n");

arch/sparc/kernel/leon_pci_grpci1.c

@@ -536,11 +536,9 @@ static int grpci1_of_probe(struct platform_device *ofdev)
 
 	/* find device register base address */
 	res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
-	regs = devm_request_and_ioremap(&ofdev->dev, res);
-	if (!regs) {
-		dev_err(&ofdev->dev, "io-regs mapping failed\n");
-		return -EADDRNOTAVAIL;
-	}
+	regs = devm_ioremap_resource(&ofdev->dev, res);
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
 
 	/*
 	 * check that we're in Host Slot and that we can act as a Host Bridge

arch/sparc/kernel/leon_pmc.c

@@ -47,6 +47,10 @@ void pmc_leon_idle_fixup(void)
 	 * MMU does not get a TLB miss here by using the MMU BYPASS ASI.
 	 */
 	register unsigned int address = (unsigned int)leon3_irqctrl_regs;
+
+	/* Interrupts need to be enabled to not hang the CPU */
+	local_irq_enable();
+
 	__asm__ __volatile__ (
 		"wr	%%g0, %%asr19\n"
 		"lda	[%0] %1, %%g0\n"
@@ -60,6 +64,9 @@ void pmc_leon_idle_fixup(void)
  */
 void pmc_leon_idle(void)
 {
+	/* Interrupts need to be enabled to not hang the CPU */
+	local_irq_enable();
+
 	/* For systems without power-down, this will be no-op */
 	__asm__ __volatile__ ("wr	%g0, %asr19\n\t");
 }

arch/sparc/kernel/setup_32.c

@@ -304,7 +304,7 @@ void __init setup_arch(char **cmdline_p)
 
 	/* Initialize PROM console and command line. */
 	*cmdline_p = prom_getbootargs();
-	strcpy(boot_command_line, *cmdline_p);
+	strlcpy(boot_command_line, *cmdline_p, COMMAND_LINE_SIZE);
 	parse_early_param();
 
 	boot_flags_init(*cmdline_p);

arch/sparc/kernel/setup_64.c

@@ -555,7 +555,7 @@ void __init setup_arch(char **cmdline_p)
 {
 	/* Initialize PROM console and command line. */
 	*cmdline_p = prom_getbootargs();
-	strcpy(boot_command_line, *cmdline_p);
+	strlcpy(boot_command_line, *cmdline_p, COMMAND_LINE_SIZE);
 	parse_early_param();
 
 	boot_flags_init(*cmdline_p);

arch/sparc/mm/init_64.c

@@ -1098,7 +1098,14 @@ static int __init grab_mblocks(struct mdesc_handle *md)
 		m->size = *val;
 		val = mdesc_get_property(md, node,
 					 "address-congruence-offset", NULL);
-		m->offset = *val;
+
+		/* The address-congruence-offset property is optional.
+		 * Explicity zero it be identifty this.
+		 */
+		if (val)
+			m->offset = *val;
+		else
+			m->offset = 0UL;
 
 		numadbg("MBLOCK[%d]: base[%llx] size[%llx] offset[%llx]\n",
 			count - 1, m->base, m->size, m->offset);

arch/sparc/mm/tlb.c

@@ -85,8 +85,8 @@ static void tlb_batch_add_one(struct mm_struct *mm, unsigned long vaddr,
 	}
 
 	if (!tb->active) {
-		global_flush_tlb_page(mm, vaddr);
 		flush_tsb_user_page(mm, vaddr);
+		global_flush_tlb_page(mm, vaddr);
 		goto out;
 	}
 

arch/sparc/prom/bootstr_32.c

@@ -23,23 +23,25 @@ prom_getbootargs(void)
 		return barg_buf;
 	}
 
-	switch(prom_vers) {
+	switch (prom_vers) {
 	case PROM_V0:
 		cp = barg_buf;
 		/* Start from 1 and go over fd(0,0,0)kernel */
-		for(iter = 1; iter < 8; iter++) {
+		for (iter = 1; iter < 8; iter++) {
 			arg = (*(romvec->pv_v0bootargs))->argv[iter];
 			if (arg == NULL)
 				break;
-			while(*arg != 0) {
+			while (*arg != 0) {
 				/* Leave place for space and null. */
-				if(cp >= barg_buf + BARG_LEN-2){
+				if (cp >= barg_buf + BARG_LEN - 2)
 					/* We might issue a warning here. */
 					break;
-				}
 				*cp++ = *arg++;
 			}
 			*cp++ = ' ';
+			if (cp >= barg_buf + BARG_LEN - 1)
+				/* We might issue a warning here. */
+				break;
 		}
 		*cp = 0;
 		break;

arch/sparc/prom/tree_64.c

@@ -39,7 +39,7 @@ inline phandle __prom_getchild(phandle node)
 	return prom_node_to_node("child", node);
 }
 
-inline phandle prom_getchild(phandle node)
+phandle prom_getchild(phandle node)
 {
 	phandle cnode;
 
@@ -72,7 +72,7 @@ inline phandle __prom_getsibling(phandle node)
 	return prom_node_to_node(prom_peer_name, node);
 }
 
-inline phandle prom_getsibling(phandle node)
+phandle prom_getsibling(phandle node)
 {
 	phandle sibnode;
 
@@ -89,7 +89,7 @@ EXPORT_SYMBOL(prom_getsibling);
 /* Return the length in bytes of property 'prop' at node 'node'.
  * Return -1 on error.
  */
-inline int prom_getproplen(phandle node, const char *prop)
+int prom_getproplen(phandle node, const char *prop)
 {
 	unsigned long args[6];
 
@@ -113,8 +113,8 @@ EXPORT_SYMBOL(prom_getproplen);
  * 'buffer' which has a size of 'bufsize'.  If the acquisition
  * was successful the length will be returned, else -1 is returned.
  */
-inline int prom_getproperty(phandle node, const char *prop,
-			    char *buffer, int bufsize)
+int prom_getproperty(phandle node, const char *prop,
+		     char *buffer, int bufsize)
 {
 	unsigned long args[8];
 	int plen;
@@ -141,7 +141,7 @@ EXPORT_SYMBOL(prom_getproperty);
 /* Acquire an integer property and return its value.  Returns -1
  * on failure.
  */
-inline int prom_getint(phandle node, const char *prop)
+int prom_getint(phandle node, const char *prop)
 {
 	int intprop;
 
@@ -235,7 +235,7 @@ static const char *prom_nextprop_name = "nextprop";
 /* Return the first property type for node 'node'.
  * buffer should be at least 32B in length
  */
-inline char *prom_firstprop(phandle node, char *buffer)
+char *prom_firstprop(phandle node, char *buffer)
 {
 	unsigned long args[7];
 
@@ -261,7 +261,7 @@ EXPORT_SYMBOL(prom_firstprop);
  * at node 'node' .  Returns NULL string if no more
  * property types for this node.
  */
-inline char *prom_nextprop(phandle node, const char *oprop, char *buffer)
+char *prom_nextprop(phandle node, const char *oprop, char *buffer)
 {
 	unsigned long args[7];
 	char buf[32];

arch/tile/lib/exports.c

@@ -84,4 +84,6 @@ uint64_t __ashrdi3(uint64_t, unsigned int);
 EXPORT_SYMBOL(__ashrdi3);
 uint64_t __ashldi3(uint64_t, unsigned int);
 EXPORT_SYMBOL(__ashldi3);
+int __ffsdi2(uint64_t);
+EXPORT_SYMBOL(__ffsdi2);
 #endif

arch/um/drivers/mconsole_kern.c

@@ -147,7 +147,7 @@ void mconsole_proc(struct mc_request *req)
 	}
 
 	do {
-		loff_t pos;
+		loff_t pos = file->f_pos;
 		mm_segment_t old_fs = get_fs();
 		set_fs(KERNEL_DS);
 		len = vfs_read(file, buf, PAGE_SIZE - 1, &pos);

arch/x86/Kconfig

@@ -2265,6 +2265,7 @@ source "fs/Kconfig.binfmt"
 config IA32_EMULATION
 	bool "IA32 Emulation"
 	depends on X86_64
+	select BINFMT_ELF
 	select COMPAT_BINFMT_ELF
 	select HAVE_UID16
 	---help---

arch/x86/crypto/aesni-intel_asm.S

@@ -2681,56 +2681,68 @@ ENTRY(aesni_xts_crypt8)
 	addq %rcx, KEYP
 
 	movdqa IV, STATE1
-	pxor 0x00(INP), STATE1
+	movdqu 0x00(INP), INC
+	pxor INC, STATE1
 	movdqu IV, 0x00(OUTP)
 
 	_aesni_gf128mul_x_ble()
 	movdqa IV, STATE2
-	pxor 0x10(INP), STATE2
+	movdqu 0x10(INP), INC
+	pxor INC, STATE2
 	movdqu IV, 0x10(OUTP)
 
 	_aesni_gf128mul_x_ble()
 	movdqa IV, STATE3
-	pxor 0x20(INP), STATE3
+	movdqu 0x20(INP), INC
+	pxor INC, STATE3
 	movdqu IV, 0x20(OUTP)
 
 	_aesni_gf128mul_x_ble()
 	movdqa IV, STATE4
-	pxor 0x30(INP), STATE4
+	movdqu 0x30(INP), INC
+	pxor INC, STATE4
 	movdqu IV, 0x30(OUTP)
 
 	call *%r11
 
-	pxor 0x00(OUTP), STATE1
+	movdqu 0x00(OUTP), INC
+	pxor INC, STATE1
 	movdqu STATE1, 0x00(OUTP)
 
 	_aesni_gf128mul_x_ble()
 	movdqa IV, STATE1
-	pxor 0x40(INP), STATE1
+	movdqu 0x40(INP), INC
+	pxor INC, STATE1
 	movdqu IV, 0x40(OUTP)
 
-	pxor 0x10(OUTP), STATE2
+	movdqu 0x10(OUTP), INC
+	pxor INC, STATE2
 	movdqu STATE2, 0x10(OUTP)
 
 	_aesni_gf128mul_x_ble()
 	movdqa IV, STATE2
-	pxor 0x50(INP), STATE2
+	movdqu 0x50(INP), INC
+	pxor INC, STATE2
 	movdqu IV, 0x50(OUTP)
 
-	pxor 0x20(OUTP), STATE3
+	movdqu 0x20(OUTP), INC
+	pxor INC, STATE3
 	movdqu STATE3, 0x20(OUTP)
 
 	_aesni_gf128mul_x_ble()
 	movdqa IV, STATE3
-	pxor 0x60(INP), STATE3
+	movdqu 0x60(INP), INC
+	pxor INC, STATE3
 	movdqu IV, 0x60(OUTP)
 
-	pxor 0x30(OUTP), STATE4
+	movdqu 0x30(OUTP), INC
+	pxor INC, STATE4
 	movdqu STATE4, 0x30(OUTP)
 
 	_aesni_gf128mul_x_ble()
 	movdqa IV, STATE4
-	pxor 0x70(INP), STATE4
+	movdqu 0x70(INP), INC
+	pxor INC, STATE4
 	movdqu IV, 0x70(OUTP)
 
 	_aesni_gf128mul_x_ble()
@@ -2738,16 +2750,20 @@ ENTRY(aesni_xts_crypt8)
 
 	call *%r11
 
-	pxor 0x40(OUTP), STATE1
+	movdqu 0x40(OUTP), INC
+	pxor INC, STATE1
 	movdqu STATE1, 0x40(OUTP)
 
-	pxor 0x50(OUTP), STATE2
+	movdqu 0x50(OUTP), INC
+	pxor INC, STATE2
 	movdqu STATE2, 0x50(OUTP)
 
-	pxor 0x60(OUTP), STATE3
+	movdqu 0x60(OUTP), INC
+	pxor INC, STATE3
 	movdqu STATE3, 0x60(OUTP)
 
-	pxor 0x70(OUTP), STATE4
+	movdqu 0x70(OUTP), INC
+	pxor INC, STATE4
 	movdqu STATE4, 0x70(OUTP)
 
 	ret

arch/x86/ia32/ia32_aout.c

@@ -192,7 +192,7 @@ static int aout_core_dump(long signr, struct pt_regs *regs, struct file *file,
 	/* struct user */
 	DUMP_WRITE(&dump, sizeof(dump));
 	/* Now dump all of the user data.  Include malloced stuff as well */
-	DUMP_SEEK(PAGE_SIZE);
+	DUMP_SEEK(PAGE_SIZE - sizeof(dump));
 	/* now we start writing out the user space info */
 	set_fs(USER_DS);
 	/* Dump the data area */

arch/x86/include/asm/irq.h

@@ -41,4 +41,9 @@ extern int vector_used_by_percpu_irq(unsigned int vector);
 
 extern void init_ISA_irqs(void);
 
+#ifdef CONFIG_X86_LOCAL_APIC
+void arch_trigger_all_cpu_backtrace(void);
+#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
+#endif
+
 #endif /* _ASM_X86_IRQ_H */

arch/x86/include/asm/microcode.h

@@ -60,11 +60,11 @@ static inline void __exit exit_amd_microcode(void) {}
 #ifdef CONFIG_MICROCODE_EARLY
 #define MAX_UCODE_COUNT 128
 extern void __init load_ucode_bsp(void);
-extern __init void load_ucode_ap(void);
+extern void __cpuinit load_ucode_ap(void);
 extern int __init save_microcode_in_initrd(void);
 #else
 static inline void __init load_ucode_bsp(void) {}
-static inline __init void load_ucode_ap(void) {}
+static inline void __cpuinit load_ucode_ap(void) {}
 static inline int __init save_microcode_in_initrd(void)
 {
 	return 0;

arch/x86/include/asm/nmi.h

@@ -18,9 +18,7 @@ extern int proc_nmi_enabled(struct ctl_table *, int ,
 			void __user *, size_t *, loff_t *);
 extern int unknown_nmi_panic;
 
-void arch_trigger_all_cpu_backtrace(void);
-#define arch_trigger_all_cpu_backtrace arch_trigger_all_cpu_backtrace
-#endif
+#endif /* CONFIG_X86_LOCAL_APIC */
 
 #define NMI_FLAG_FIRST	1
 

arch/x86/kernel/apic/hw_nmi.c

@@ -9,6 +9,7 @@
  *
  */
 #include <asm/apic.h>
+#include <asm/nmi.h>
 
 #include <linux/cpumask.h>
 #include <linux/kdebug.h>

arch/x86/kernel/cpu/mtrr/cleanup.c

@@ -714,15 +714,15 @@ int __init mtrr_cleanup(unsigned address_bits)
 	if (mtrr_tom2)
 		x_remove_size = (mtrr_tom2 >> PAGE_SHIFT) - x_remove_base;
 
-	nr_range = x86_get_mtrr_mem_range(range, 0, x_remove_base, x_remove_size);
 	/*
 	 * [0, 1M) should always be covered by var mtrr with WB
 	 * and fixed mtrrs should take effect before var mtrr for it:
 	 */
-	nr_range = add_range_with_merge(range, RANGE_NUM, nr_range, 0,
+	nr_range = add_range_with_merge(range, RANGE_NUM, 0, 0,
 					1ULL<<(20 - PAGE_SHIFT));
-	/* Sort the ranges: */
-	sort_range(range, nr_range);
+	/* add from var mtrr at last */
+	nr_range = x86_get_mtrr_mem_range(range, nr_range,
+					  x_remove_base, x_remove_size);
 
 	range_sums = sum_ranges(range, nr_range);
 	printk(KERN_INFO "total RAM covered: %ldM\n",

arch/x86/kernel/cpu/perf_event_intel.c

@@ -165,13 +165,13 @@ static struct extra_reg intel_snb_extra_regs[] __read_mostly = {
 	INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0x3f807f8fffull, RSP_0),
 	INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0x3f807f8fffull, RSP_1),
 	INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd),
-	INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd),
 	EVENT_EXTRA_END
 };
 
 static struct extra_reg intel_snbep_extra_regs[] __read_mostly = {
 	INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0x3fffff8fffull, RSP_0),
 	INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0x3fffff8fffull, RSP_1),
+	INTEL_UEVENT_PEBS_LDLAT_EXTRA_REG(0x01cd),
 	EVENT_EXTRA_END
 };
 

arch/x86/kernel/kvmclock.c

@@ -242,6 +242,7 @@ void __init kvmclock_init(void)
 	if (!mem)
 		return;
 	hv_clock = __va(mem);
+	memset(hv_clock, 0, size);
 
 	if (kvm_register_clock("boot clock")) {
 		hv_clock = NULL;

arch/x86/kernel/process.c

@@ -277,18 +277,6 @@ void exit_idle(void)
 }
 #endif
 
-void arch_cpu_idle_prepare(void)
-{
-	/*
-	 * If we're the non-boot CPU, nothing set the stack canary up
-	 * for us.  CPU0 already has it initialized but no harm in
-	 * doing it again.  This is a good place for updating it, as
-	 * we wont ever return from this function (so the invalid
-	 * canaries already on the stack wont ever trigger).
-	 */
-	boot_init_stack_canary();
-}
-
 void arch_cpu_idle_enter(void)
 {
 	local_touch_nmi();

arch/x86/kernel/smpboot.c

@@ -372,15 +372,15 @@ static bool __cpuinit match_mc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
 
 void __cpuinit set_cpu_sibling_map(int cpu)
 {
-	bool has_mc = boot_cpu_data.x86_max_cores > 1;
 	bool has_smt = smp_num_siblings > 1;
+	bool has_mp = has_smt || boot_cpu_data.x86_max_cores > 1;
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 	struct cpuinfo_x86 *o;
 	int i;
 
 	cpumask_set_cpu(cpu, cpu_sibling_setup_mask);
 
-	if (!has_smt && !has_mc) {
+	if (!has_mp) {
 		cpumask_set_cpu(cpu, cpu_sibling_mask(cpu));
 		cpumask_set_cpu(cpu, cpu_llc_shared_mask(cpu));
 		cpumask_set_cpu(cpu, cpu_core_mask(cpu));
@@ -394,7 +394,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
 		if ((i == cpu) || (has_smt && match_smt(c, o)))
 			link_mask(sibling, cpu, i);
 
-		if ((i == cpu) || (has_mc && match_llc(c, o)))
+		if ((i == cpu) || (has_mp && match_llc(c, o)))
 			link_mask(llc_shared, cpu, i);
 
 	}
@@ -406,7 +406,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
 	for_each_cpu(i, cpu_sibling_setup_mask) {
 		o = &cpu_data(i);
 
-		if ((i == cpu) || (has_mc && match_mc(c, o))) {
+		if ((i == cpu) || (has_mp && match_mc(c, o))) {
 			link_mask(core, cpu, i);
 
 			/*

arch/x86/kvm/x86.c

@@ -582,8 +582,6 @@ int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
 	if (index != XCR_XFEATURE_ENABLED_MASK)
 		return 1;
 	xcr0 = xcr;
-	if (kvm_x86_ops->get_cpl(vcpu) != 0)
-		return 1;
 	if (!(xcr0 & XSTATE_FP))
 		return 1;
 	if ((xcr0 & XSTATE_YMM) && !(xcr0 & XSTATE_SSE))
@@ -597,7 +595,8 @@ int __kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
 
 int kvm_set_xcr(struct kvm_vcpu *vcpu, u32 index, u64 xcr)
 {
-	if (__kvm_set_xcr(vcpu, index, xcr)) {
+	if (kvm_x86_ops->get_cpl(vcpu) != 0 ||
+	    __kvm_set_xcr(vcpu, index, xcr)) {
 		kvm_inject_gp(vcpu, 0);
 		return 1;
 	}

arch/x86/platform/efi/efi.c

@@ -1069,7 +1069,10 @@ efi_status_t efi_query_variable_store(u32 attributes, unsigned long size)
 		 * that by attempting to use more space than is available.
 		 */
 		unsigned long dummy_size = remaining_size + 1024;
-		void *dummy = kmalloc(dummy_size, GFP_ATOMIC);
+		void *dummy = kzalloc(dummy_size, GFP_ATOMIC);
+
+		if (!dummy)
+			return EFI_OUT_OF_RESOURCES;
 
 		status = efi.set_variable(efi_dummy_name, &EFI_DUMMY_GUID,
 					  EFI_VARIABLE_NON_VOLATILE |
@@ -1089,6 +1092,8 @@ efi_status_t efi_query_variable_store(u32 attributes, unsigned long size)
 					 0, dummy);
 		}
 
+		kfree(dummy);
+
 		/*
 		 * The runtime code may now have triggered a garbage collection
 		 * run, so check the variable info again

drivers/acpi/acpi_lpss.c

@@ -164,15 +164,24 @@ static int acpi_lpss_create_device(struct acpi_device *adev,
 	if (dev_desc->clk_required) {
 		ret = register_device_clock(adev, pdata);
 		if (ret) {
-			/*
-			 * Skip the device, but don't terminate the namespace
-			 * scan.
-			 */
-			kfree(pdata);
-			return 0;
+			/* Skip the device, but continue the namespace scan. */
+			ret = 0;
+			goto err_out;
 		}
 	}
 
+	/*
+	 * This works around a known issue in ACPI tables where LPSS devices
+	 * have _PS0 and _PS3 without _PSC (and no power resources), so
+	 * acpi_bus_init_power() will assume that the BIOS has put them into D0.
+	 */
+	ret = acpi_device_fix_up_power(adev);
+	if (ret) {
+		/* Skip the device, but continue the namespace scan. */
+		ret = 0;
+		goto err_out;
+	}
+
 	adev->driver_data = pdata;
 	ret = acpi_create_platform_device(adev, id);
 	if (ret > 0)

drivers/acpi/device_pm.c

@@ -290,6 +290,26 @@ int acpi_bus_init_power(struct acpi_device *device)
 	return 0;
 }
 
+/**
+ * acpi_device_fix_up_power - Force device with missing _PSC into D0.
+ * @device: Device object whose power state is to be fixed up.
+ *
+ * Devices without power resources and _PSC, but having _PS0 and _PS3 defined,
+ * are assumed to be put into D0 by the BIOS.  However, in some cases that may
+ * not be the case and this function should be used then.
+ */
+int acpi_device_fix_up_power(struct acpi_device *device)
+{
+	int ret = 0;
+
+	if (!device->power.flags.power_resources
+	    && !device->power.flags.explicit_get
+	    && device->power.state == ACPI_STATE_D0)
+		ret = acpi_dev_pm_explicit_set(device, ACPI_STATE_D0);
+
+	return ret;
+}
+
 int acpi_bus_update_power(acpi_handle handle, int *state_p)
 {
 	struct acpi_device *device;

drivers/acpi/dock.c

@@ -868,8 +868,10 @@ static ssize_t write_undock(struct device *dev, struct device_attribute *attr,
 	if (!count)
 		return -EINVAL;
 
+	acpi_scan_lock_acquire();
 	begin_undock(dock_station);
 	ret = handle_eject_request(dock_station, ACPI_NOTIFY_EJECT_REQUEST);
+	acpi_scan_lock_release();
 	return ret ? ret: count;
 }
 static DEVICE_ATTR(undock, S_IWUSR, NULL, write_undock);

drivers/acpi/power.c

@@ -885,6 +885,7 @@ int acpi_add_power_resource(acpi_handle handle)
 				ACPI_STA_DEFAULT);
 	mutex_init(&resource->resource_lock);
 	INIT_LIST_HEAD(&resource->dependent);
+	INIT_LIST_HEAD(&resource->list_node);
 	resource->name = device->pnp.bus_id;
 	strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME);
 	strcpy(acpi_device_class(device), ACPI_POWER_CLASS);

drivers/acpi/resource.c

@@ -304,7 +304,8 @@ static void acpi_dev_irqresource_disabled(struct resource *res, u32 gsi)
 }
 
 static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
-				     u8 triggering, u8 polarity, u8 shareable)
+				     u8 triggering, u8 polarity, u8 shareable,
+				     bool legacy)
 {
 	int irq, p, t;
 
@@ -317,14 +318,19 @@ static void acpi_dev_get_irqresource(struct resource *res, u32 gsi,
 	 * In IO-APIC mode, use overrided attribute. Two reasons:
 	 * 1. BIOS bug in DSDT
 	 * 2. BIOS uses IO-APIC mode Interrupt Source Override
+	 *
+	 * We do this only if we are dealing with IRQ() or IRQNoFlags()
+	 * resource (the legacy ISA resources). With modern ACPI 5 devices
+	 * using extended IRQ descriptors we take the IRQ configuration
+	 * from _CRS directly.
 	 */
-	if (!acpi_get_override_irq(gsi, &t, &p)) {
+	if (legacy && !acpi_get_override_irq(gsi, &t, &p)) {
 		u8 trig = t ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
 		u8 pol = p ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
 
 		if (triggering != trig || polarity != pol) {
 			pr_warning("ACPI: IRQ %d override to %s, %s\n", gsi,
-				   t ? "edge" : "level", p ? "low" : "high");
+				   t ? "level" : "edge", p ? "low" : "high");
 			triggering = trig;
 			polarity = pol;
 		}
@@ -373,7 +379,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
 		}
 		acpi_dev_get_irqresource(res, irq->interrupts[index],
 					 irq->triggering, irq->polarity,
-					 irq->sharable);
+					 irq->sharable, true);
 		break;
 	case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
 		ext_irq = &ares->data.extended_irq;
@@ -383,7 +389,7 @@ bool acpi_dev_resource_interrupt(struct acpi_resource *ares, int index,
 		}
 		acpi_dev_get_irqresource(res, ext_irq->interrupts[index],
 					 ext_irq->triggering, ext_irq->polarity,
-					 ext_irq->sharable);
+					 ext_irq->sharable, false);
 		break;
 	default:
 		return false;

drivers/base/firmware_class.c

@@ -450,8 +450,18 @@ static void fw_load_abort(struct firmware_priv *fw_priv)
 {
 	struct firmware_buf *buf = fw_priv->buf;
 
+	/*
+	 * There is a small window in which user can write to 'loading'
+	 * between loading done and disappearance of 'loading'
+	 */
+	if (test_bit(FW_STATUS_DONE, &buf->status))
+		return;
+
 	set_bit(FW_STATUS_ABORT, &buf->status);
 	complete_all(&buf->completion);
+
+	/* avoid user action after loading abort */
+	fw_priv->buf = NULL;
 }
 
 #define is_fw_load_aborted(buf)	\
@@ -528,7 +538,12 @@ static ssize_t firmware_loading_show(struct device *dev,
 				     struct device_attribute *attr, char *buf)
 {
 	struct firmware_priv *fw_priv = to_firmware_priv(dev);
-	int loading = test_bit(FW_STATUS_LOADING, &fw_priv->buf->status);
+	int loading = 0;
+
+	mutex_lock(&fw_lock);
+	if (fw_priv->buf)
+		loading = test_bit(FW_STATUS_LOADING, &fw_priv->buf->status);
+	mutex_unlock(&fw_lock);
 
 	return sprintf(buf, "%d\n", loading);
 }
@@ -570,12 +585,12 @@ static ssize_t firmware_loading_store(struct device *dev,
 				      const char *buf, size_t count)
 {
 	struct firmware_priv *fw_priv = to_firmware_priv(dev);
-	struct firmware_buf *fw_buf = fw_priv->buf;
+	struct firmware_buf *fw_buf;
 	int loading = simple_strtol(buf, NULL, 10);
 	int i;
 
 	mutex_lock(&fw_lock);
-
+	fw_buf = fw_priv->buf;
 	if (!fw_buf)
 		goto out;
 
@@ -777,10 +792,6 @@ static void firmware_class_timeout_work(struct work_struct *work)
 			struct firmware_priv, timeout_work.work);
 
 	mutex_lock(&fw_lock);
-	if (test_bit(FW_STATUS_DONE, &(fw_priv->buf->status))) {
-		mutex_unlock(&fw_lock);
-		return;
-	}
 	fw_load_abort(fw_priv);
 	mutex_unlock(&fw_lock);
 }
@@ -861,8 +872,6 @@ static int _request_firmware_load(struct firmware_priv *fw_priv, bool uevent,
 
 	cancel_delayed_work_sync(&fw_priv->timeout_work);
 
-	fw_priv->buf = NULL;
-
 	device_remove_file(f_dev, &dev_attr_loading);
 err_del_bin_attr:
 	device_remove_bin_file(f_dev, &firmware_attr_data);

drivers/block/rbd.c

@@ -1036,12 +1036,16 @@ static const char *rbd_segment_name(struct rbd_device *rbd_dev, u64 offset)
 	char *name;
 	u64 segment;
 	int ret;
+	char *name_format;
 
 	name = kmem_cache_alloc(rbd_segment_name_cache, GFP_NOIO);
 	if (!name)
 		return NULL;
 	segment = offset >> rbd_dev->header.obj_order;
-	ret = snprintf(name, MAX_OBJ_NAME_SIZE + 1, "%s.%012llx",
+	name_format = "%s.%012llx";
+	if (rbd_dev->image_format == 2)
+		name_format = "%s.%016llx";
+	ret = snprintf(name, MAX_OBJ_NAME_SIZE + 1, name_format,
 			rbd_dev->header.object_prefix, segment);
 	if (ret < 0 || ret > MAX_OBJ_NAME_SIZE) {
 		pr_err("error formatting segment name for #%llu (%d)\n",

drivers/clk/clk.c

@@ -1955,6 +1955,7 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb)
 		/* XXX the notifier code should handle this better */
 		if (!cn->notifier_head.head) {
 			srcu_cleanup_notifier_head(&cn->notifier_head);
+			list_del(&cn->node);
 			kfree(cn);
 		}
 

drivers/clk/samsung/clk-exynos5250.c

@@ -155,7 +155,7 @@ static __initdata unsigned long exynos5250_clk_regs[] = {
 
 /* list of all parent clock list */
 PNAME(mout_apll_p)	= { "fin_pll", "fout_apll", };
-PNAME(mout_cpu_p)	= { "mout_apll", "mout_mpll", };
+PNAME(mout_cpu_p)	= { "mout_apll", "sclk_mpll", };
 PNAME(mout_mpll_fout_p)	= { "fout_mplldiv2", "fout_mpll" };
 PNAME(mout_mpll_p)	= { "fin_pll", "mout_mpll_fout" };
 PNAME(mout_bpll_fout_p)	= { "fout_bplldiv2", "fout_bpll" };
@@ -208,10 +208,10 @@ struct samsung_fixed_factor_clock exynos5250_fixed_factor_clks[] __initdata = {
 };
 
 struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
-	MUX(none, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
-	MUX(none, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
+	MUX_A(none, "mout_apll", mout_apll_p, SRC_CPU, 0, 1, "mout_apll"),
+	MUX_A(none, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1, "mout_cpu"),
 	MUX(none, "mout_mpll_fout", mout_mpll_fout_p, PLL_DIV2_SEL, 4, 1),
-	MUX(none, "sclk_mpll", mout_mpll_p, SRC_CORE1, 8, 1),
+	MUX_A(none, "sclk_mpll", mout_mpll_p, SRC_CORE1, 8, 1, "mout_mpll"),
 	MUX(none, "mout_bpll_fout", mout_bpll_fout_p, PLL_DIV2_SEL, 0, 1),
 	MUX(none, "sclk_bpll", mout_bpll_p, SRC_CDREX, 0, 1),
 	MUX(none, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP2, 0, 1),
@@ -378,7 +378,7 @@ struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
 	GATE(hsi2c3, "hsi2c3", "aclk66", GATE_IP_PERIC, 31, 0, 0),
 	GATE(chipid, "chipid", "aclk66", GATE_IP_PERIS, 0, 0, 0),
 	GATE(sysreg, "sysreg", "aclk66", GATE_IP_PERIS, 1, 0, 0),
-	GATE(pmu, "pmu", "aclk66", GATE_IP_PERIS, 2, 0, 0),
+	GATE(pmu, "pmu", "aclk66", GATE_IP_PERIS, 2, CLK_IGNORE_UNUSED, 0),
 	GATE(tzpc0, "tzpc0", "aclk66", GATE_IP_PERIS, 6, 0, 0),
 	GATE(tzpc1, "tzpc1", "aclk66", GATE_IP_PERIS, 7, 0, 0),
 	GATE(tzpc2, "tzpc2", "aclk66", GATE_IP_PERIS, 8, 0, 0),

drivers/clk/samsung/clk-pll.c

@@ -111,7 +111,8 @@ static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw,
 				unsigned long parent_rate)
 {
 	struct samsung_clk_pll36xx *pll = to_clk_pll36xx(hw);
-	u32 mdiv, pdiv, sdiv, kdiv, pll_con0, pll_con1;
+	u32 mdiv, pdiv, sdiv, pll_con0, pll_con1;
+	s16 kdiv;
 	u64 fvco = parent_rate;
 
 	pll_con0 = __raw_readl(pll->con_reg);
@@ -119,7 +120,7 @@ static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw,
 	mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
 	pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
 	sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
-	kdiv = pll_con1 & PLL36XX_KDIV_MASK;
+	kdiv = (s16)(pll_con1 & PLL36XX_KDIV_MASK);
 
 	fvco *= (mdiv << 16) + kdiv;
 	do_div(fvco, (pdiv << sdiv));

drivers/clk/spear/spear3xx_clock.c

@@ -369,7 +369,7 @@ static void __init spear320_clk_init(void __iomem *soc_config_base)
 	clk_register_clkdev(clk, NULL, "60100000.serial");
 }
 #else
-static inline void spear320_clk_init(void) { }
+static inline void spear320_clk_init(void __iomem *soc_config_base) { }
 #endif
 
 void __init spear3xx_clk_init(void __iomem *misc_base, void __iomem *soc_config_base)

drivers/clk/tegra/clk-tegra30.c

@@ -1598,6 +1598,12 @@ static void __init tegra30_periph_clk_init(void)
 	clk_register_clkdev(clk, "afi", "tegra-pcie");
 	clks[afi] = clk;
 
+	/* pciex */
+	clk = tegra_clk_register_periph_gate("pciex", "pll_e", 0, clk_base, 0,
+				    74, &periph_u_regs, periph_clk_enb_refcnt);
+	clk_register_clkdev(clk, "pciex", "tegra-pcie");
+	clks[pciex] = clk;
+
 	/* kfuse */
 	clk = tegra_clk_register_periph_gate("kfuse", "clk_m",
 				    TEGRA_PERIPH_ON_APB,
@@ -1716,11 +1722,6 @@ static void __init tegra30_fixed_clk_init(void)
 				1, 0, &cml_lock);
 	clk_register_clkdev(clk, "cml1", NULL);
 	clks[cml1] = clk;
-
-	/* pciex */
-	clk = clk_register_fixed_rate(NULL, "pciex", "pll_e", 0, 100000000);
-	clk_register_clkdev(clk, "pciex", NULL);
-	clks[pciex] = clk;
 }
 
 static void __init tegra30_osc_clk_init(void)

drivers/gpu/drm/drm_prime.c

@@ -190,8 +190,7 @@ struct dma_buf *drm_gem_prime_export(struct drm_device *dev,
 		if (ret)
 			return ERR_PTR(ret);
 	}
-	return dma_buf_export(obj, &drm_gem_prime_dmabuf_ops, obj->size,
-			      0600);
+	return dma_buf_export(obj, &drm_gem_prime_dmabuf_ops, obj->size, flags);
 }
 EXPORT_SYMBOL(drm_gem_prime_export);
 

drivers/gpu/drm/radeon/r600.c

@@ -2687,6 +2687,9 @@ void r600_uvd_rbc_stop(struct radeon_device *rdev)
 int r600_uvd_init(struct radeon_device *rdev)
 {
 	int i, j, r;
+	/* disable byte swapping */
+	u32 lmi_swap_cntl = 0;
+	u32 mp_swap_cntl = 0;
 
 	/* raise clocks while booting up the VCPU */
 	radeon_set_uvd_clocks(rdev, 53300, 40000);
@@ -2711,9 +2714,13 @@ int r600_uvd_init(struct radeon_device *rdev)
 	WREG32(UVD_LMI_CTRL, 0x40 | (1 << 8) | (1 << 13) |
 			     (1 << 21) | (1 << 9) | (1 << 20));
 
-	/* disable byte swapping */
-	WREG32(UVD_LMI_SWAP_CNTL, 0);
-	WREG32(UVD_MP_SWAP_CNTL, 0);
+#ifdef __BIG_ENDIAN
+	/* swap (8 in 32) RB and IB */
+	lmi_swap_cntl = 0xa;
+	mp_swap_cntl = 0;
+#endif
+	WREG32(UVD_LMI_SWAP_CNTL, lmi_swap_cntl);
+	WREG32(UVD_MP_SWAP_CNTL, mp_swap_cntl);
 
 	WREG32(UVD_MPC_SET_MUXA0, 0x40c2040);
 	WREG32(UVD_MPC_SET_MUXA1, 0x0);

drivers/gpu/drm/radeon/radeon_device.c

@@ -244,16 +244,6 @@ void radeon_scratch_free(struct radeon_device *rdev, uint32_t reg)
  */
 void radeon_wb_disable(struct radeon_device *rdev)
 {
-	int r;
-
-	if (rdev->wb.wb_obj) {
-		r = radeon_bo_reserve(rdev->wb.wb_obj, false);
-		if (unlikely(r != 0))
-			return;
-		radeon_bo_kunmap(rdev->wb.wb_obj);
-		radeon_bo_unpin(rdev->wb.wb_obj);
-		radeon_bo_unreserve(rdev->wb.wb_obj);
-	}
 	rdev->wb.enabled = false;
 }
 
@@ -269,6 +259,11 @@ void radeon_wb_fini(struct radeon_device *rdev)
 {
 	radeon_wb_disable(rdev);
 	if (rdev->wb.wb_obj) {
+		if (!radeon_bo_reserve(rdev->wb.wb_obj, false)) {
+			radeon_bo_kunmap(rdev->wb.wb_obj);
+			radeon_bo_unpin(rdev->wb.wb_obj);
+			radeon_bo_unreserve(rdev->wb.wb_obj);
+		}
 		radeon_bo_unref(&rdev->wb.wb_obj);
 		rdev->wb.wb = NULL;
 		rdev->wb.wb_obj = NULL;
@@ -295,26 +290,26 @@ int radeon_wb_init(struct radeon_device *rdev)
 			dev_warn(rdev->dev, "(%d) create WB bo failed\n", r);
 			return r;
 		}
-	}
-	r = radeon_bo_reserve(rdev->wb.wb_obj, false);
-	if (unlikely(r != 0)) {
-		radeon_wb_fini(rdev);
-		return r;
-	}
-	r = radeon_bo_pin(rdev->wb.wb_obj, RADEON_GEM_DOMAIN_GTT,
-			  &rdev->wb.gpu_addr);
-	if (r) {
+		r = radeon_bo_reserve(rdev->wb.wb_obj, false);
+		if (unlikely(r != 0)) {
+			radeon_wb_fini(rdev);
+			return r;
+		}
+		r = radeon_bo_pin(rdev->wb.wb_obj, RADEON_GEM_DOMAIN_GTT,
+				&rdev->wb.gpu_addr);
+		if (r) {
+			radeon_bo_unreserve(rdev->wb.wb_obj);
+			dev_warn(rdev->dev, "(%d) pin WB bo failed\n", r);
+			radeon_wb_fini(rdev);
+			return r;
+		}
+		r = radeon_bo_kmap(rdev->wb.wb_obj, (void **)&rdev->wb.wb);
 		radeon_bo_unreserve(rdev->wb.wb_obj);
-		dev_warn(rdev->dev, "(%d) pin WB bo failed\n", r);
-		radeon_wb_fini(rdev);
-		return r;
-	}
-	r = radeon_bo_kmap(rdev->wb.wb_obj, (void **)&rdev->wb.wb);
-	radeon_bo_unreserve(rdev->wb.wb_obj);
-	if (r) {
-		dev_warn(rdev->dev, "(%d) map WB bo failed\n", r);
-		radeon_wb_fini(rdev);
-		return r;
+		if (r) {
+			dev_warn(rdev->dev, "(%d) map WB bo failed\n", r);
+			radeon_wb_fini(rdev);
+			return r;
+		}
 	}
 
 	/* clear wb memory */

drivers/gpu/drm/radeon/radeon_fence.c

@@ -63,7 +63,9 @@ static void radeon_fence_write(struct radeon_device *rdev, u32 seq, int ring)
 {
 	struct radeon_fence_driver *drv = &rdev->fence_drv[ring];
 	if (likely(rdev->wb.enabled || !drv->scratch_reg)) {
-		*drv->cpu_addr = cpu_to_le32(seq);
+		if (drv->cpu_addr) {
+			*drv->cpu_addr = cpu_to_le32(seq);
+		}
 	} else {
 		WREG32(drv->scratch_reg, seq);
 	}
@@ -84,7 +86,11 @@ static u32 radeon_fence_read(struct radeon_device *rdev, int ring)
 	u32 seq = 0;
 
 	if (likely(rdev->wb.enabled || !drv->scratch_reg)) {
-		seq = le32_to_cpu(*drv->cpu_addr);
+		if (drv->cpu_addr) {
+			seq = le32_to_cpu(*drv->cpu_addr);
+		} else {
+			seq = lower_32_bits(atomic64_read(&drv->last_seq));
+		}
 	} else {
 		seq = RREG32(drv->scratch_reg);
 	}

drivers/gpu/drm/radeon/radeon_gart.c

@@ -1197,11 +1197,13 @@ int radeon_vm_bo_update_pte(struct radeon_device *rdev,
 int radeon_vm_bo_rmv(struct radeon_device *rdev,
 		     struct radeon_bo_va *bo_va)
 {
-	int r;
+	int r = 0;
 
 	mutex_lock(&rdev->vm_manager.lock);
 	mutex_lock(&bo_va->vm->mutex);
-	r = radeon_vm_bo_update_pte(rdev, bo_va->vm, bo_va->bo, NULL);
+	if (bo_va->soffset) {
+		r = radeon_vm_bo_update_pte(rdev, bo_va->vm, bo_va->bo, NULL);
+	}
 	mutex_unlock(&rdev->vm_manager.lock);
 	list_del(&bo_va->vm_list);
 	mutex_unlock(&bo_va->vm->mutex);

drivers/gpu/drm/radeon/radeon_ring.c

@@ -402,6 +402,13 @@ int radeon_ring_alloc(struct radeon_device *rdev, struct radeon_ring *ring, unsi
 		return -ENOMEM;
 	/* Align requested size with padding so unlock_commit can
 	 * pad safely */
+	radeon_ring_free_size(rdev, ring);
+	if (ring->ring_free_dw == (ring->ring_size / 4)) {
+		/* This is an empty ring update lockup info to avoid
+		 * false positive.
+		 */
+		radeon_ring_lockup_update(ring);
+	}
 	ndw = (ndw + ring->align_mask) & ~ring->align_mask;
 	while (ndw > (ring->ring_free_dw - 1)) {
 		radeon_ring_free_size(rdev, ring);

drivers/gpu/drm/radeon/radeon_uvd.c

@@ -159,7 +159,17 @@ int radeon_uvd_suspend(struct radeon_device *rdev)
 	if (!r) {
 		radeon_bo_kunmap(rdev->uvd.vcpu_bo);
 		radeon_bo_unpin(rdev->uvd.vcpu_bo);
+		rdev->uvd.cpu_addr = NULL;
+		if (!radeon_bo_pin(rdev->uvd.vcpu_bo, RADEON_GEM_DOMAIN_CPU, NULL)) {
+			radeon_bo_kmap(rdev->uvd.vcpu_bo, &rdev->uvd.cpu_addr);
+		}
 		radeon_bo_unreserve(rdev->uvd.vcpu_bo);
+
+		if (rdev->uvd.cpu_addr) {
+			radeon_fence_driver_start_ring(rdev, R600_RING_TYPE_UVD_INDEX);
+		} else {
+			rdev->fence_drv[R600_RING_TYPE_UVD_INDEX].cpu_addr = NULL;
+		}
 	}
 	return r;
 }
@@ -178,6 +188,10 @@ int radeon_uvd_resume(struct radeon_device *rdev)
 		return r;
 	}
 
+	/* Have been pin in cpu unmap unpin */
+	radeon_bo_kunmap(rdev->uvd.vcpu_bo);
+	radeon_bo_unpin(rdev->uvd.vcpu_bo);
+
 	r = radeon_bo_pin(rdev->uvd.vcpu_bo, RADEON_GEM_DOMAIN_VRAM,
 			  &rdev->uvd.gpu_addr);
 	if (r) {
@@ -613,19 +627,19 @@ int radeon_uvd_get_create_msg(struct radeon_device *rdev, int ring,
 	}
 
 	/* stitch together an UVD create msg */
-	msg[0] = 0x00000de4;
-	msg[1] = 0x00000000;
-	msg[2] = handle;
-	msg[3] = 0x00000000;
-	msg[4] = 0x00000000;
-	msg[5] = 0x00000000;
-	msg[6] = 0x00000000;
-	msg[7] = 0x00000780;
-	msg[8] = 0x00000440;
-	msg[9] = 0x00000000;
-	msg[10] = 0x01b37000;
+	msg[0] = cpu_to_le32(0x00000de4);
+	msg[1] = cpu_to_le32(0x00000000);
+	msg[2] = cpu_to_le32(handle);
+	msg[3] = cpu_to_le32(0x00000000);
+	msg[4] = cpu_to_le32(0x00000000);
+	msg[5] = cpu_to_le32(0x00000000);
+	msg[6] = cpu_to_le32(0x00000000);
+	msg[7] = cpu_to_le32(0x00000780);
+	msg[8] = cpu_to_le32(0x00000440);
+	msg[9] = cpu_to_le32(0x00000000);
+	msg[10] = cpu_to_le32(0x01b37000);
 	for (i = 11; i < 1024; ++i)
-		msg[i] = 0x0;
+		msg[i] = cpu_to_le32(0x0);
 
 	radeon_bo_kunmap(bo);
 	radeon_bo_unreserve(bo);
@@ -659,12 +673,12 @@ int radeon_uvd_get_destroy_msg(struct radeon_device *rdev, int ring,
 	}
 
 	/* stitch together an UVD destroy msg */
-	msg[0] = 0x00000de4;
-	msg[1] = 0x00000002;
-	msg[2] = handle;
-	msg[3] = 0x00000000;
+	msg[0] = cpu_to_le32(0x00000de4);
+	msg[1] = cpu_to_le32(0x00000002);
+	msg[2] = cpu_to_le32(handle);
+	msg[3] = cpu_to_le32(0x00000000);
 	for (i = 4; i < 1024; ++i)
-		msg[i] = 0x0;
+		msg[i] = cpu_to_le32(0x0);
 
 	radeon_bo_kunmap(bo);
 	radeon_bo_unreserve(bo);

drivers/irqchip/irq-gic.c

@@ -705,7 +705,7 @@ static int gic_irq_domain_xlate(struct irq_domain *d,
 static int __cpuinit gic_secondary_init(struct notifier_block *nfb,
 					unsigned long action, void *hcpu)
 {
-	if (action == CPU_STARTING)
+	if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
 		gic_cpu_init(&gic_data[0]);
 	return NOTIFY_OK;
 }

drivers/media/Kconfig

@@ -136,9 +136,9 @@ config DVB_NET
 
 # This Kconfig option is used by both PCI and USB drivers
 config TTPCI_EEPROM
-        tristate
-        depends on I2C
-        default n
+	tristate
+	depends on I2C
+	default n
 
 source "drivers/media/dvb-core/Kconfig"
 
@@ -189,6 +189,12 @@ config MEDIA_SUBDRV_AUTOSELECT
 
 	  If unsure say Y.
 
+config MEDIA_ATTACH
+	bool
+	depends on MEDIA_ANALOG_TV_SUPPORT || MEDIA_DIGITAL_TV_SUPPORT || MEDIA_RADIO_SUPPORT
+	depends on MODULES
+	default MODULES
+
 source "drivers/media/i2c/Kconfig"
 source "drivers/media/tuners/Kconfig"
 source "drivers/media/dvb-frontends/Kconfig"

drivers/media/i2c/s5c73m3/s5c73m3-core.c

@@ -956,7 +956,7 @@ static int s5c73m3_oif_enum_frame_interval(struct v4l2_subdev *sd,
 
 	if (fie->pad != OIF_SOURCE_PAD)
 		return -EINVAL;
-	if (fie->index > ARRAY_SIZE(s5c73m3_intervals))
+	if (fie->index >= ARRAY_SIZE(s5c73m3_intervals))
 		return -EINVAL;
 
 	mutex_lock(&state->lock);

drivers/media/pci/cx88/cx88-alsa.c

@@ -615,7 +615,7 @@ static int snd_cx88_volume_put(struct snd_kcontrol *kcontrol,
 	int changed = 0;
 	u32 old;
 
-	if (core->board.audio_chip == V4L2_IDENT_WM8775)
+	if (core->sd_wm8775)
 		snd_cx88_wm8775_volume_put(kcontrol, value);
 
 	left = value->value.integer.value[0] & 0x3f;
@@ -682,8 +682,7 @@ static int snd_cx88_switch_put(struct snd_kcontrol *kcontrol,
 		vol ^= bit;
 		cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, vol);
 		/* Pass mute onto any WM8775 */
-		if ((core->board.audio_chip == V4L2_IDENT_WM8775) &&
-		    ((1<<6) == bit))
+		if (core->sd_wm8775 && ((1<<6) == bit))
 			wm8775_s_ctrl(core, V4L2_CID_AUDIO_MUTE, 0 != (vol & bit));
 		ret = 1;
 	}
@@ -903,7 +902,7 @@ static int cx88_audio_initdev(struct pci_dev *pci,
 		goto error;
 
 	/* If there's a wm8775 then add a Line-In ALC switch */
-	if (core->board.audio_chip == V4L2_IDENT_WM8775)
+	if (core->sd_wm8775)
 		snd_ctl_add(card, snd_ctl_new1(&snd_cx88_alc_switch, chip));
 
 	strcpy (card->driver, "CX88x");

drivers/media/pci/cx88/cx88-video.c

@@ -385,8 +385,7 @@ int cx88_video_mux(struct cx88_core *core, unsigned int input)
 		/* The wm8775 module has the "2" route hardwired into
 		   the initialization. Some boards may use different
 		   routes for different inputs. HVR-1300 surely does */
-		if (core->board.audio_chip &&
-		    core->board.audio_chip == V4L2_IDENT_WM8775) {
+		if (core->sd_wm8775) {
 			call_all(core, audio, s_routing,
 				 INPUT(input).audioroute, 0, 0);
 		}
@@ -771,8 +770,7 @@ static int video_open(struct file *file)
 		cx_write(MO_GP1_IO, core->board.radio.gpio1);
 		cx_write(MO_GP2_IO, core->board.radio.gpio2);
 		if (core->board.radio.audioroute) {
-			if(core->board.audio_chip &&
-				core->board.audio_chip == V4L2_IDENT_WM8775) {
+			if (core->sd_wm8775) {
 				call_all(core, audio, s_routing,
 					core->board.radio.audioroute, 0, 0);
 			}
@@ -959,7 +957,7 @@ static int cx8800_s_aud_ctrl(struct v4l2_ctrl *ctrl)
 	u32 value,mask;
 
 	/* Pass changes onto any WM8775 */
-	if (core->board.audio_chip == V4L2_IDENT_WM8775) {
+	if (core->sd_wm8775) {
 		switch (ctrl->id) {
 		case V4L2_CID_AUDIO_MUTE:
 			wm8775_s_ctrl(core, ctrl->id, ctrl->val);

drivers/media/platform/coda.c

@@ -576,6 +576,14 @@ static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
 	return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
 }
 
+static int vidioc_create_bufs(struct file *file, void *priv,
+			      struct v4l2_create_buffers *create)
+{
+	struct coda_ctx *ctx = fh_to_ctx(priv);
+
+	return v4l2_m2m_create_bufs(file, ctx->m2m_ctx, create);
+}
+
 static int vidioc_streamon(struct file *file, void *priv,
 			   enum v4l2_buf_type type)
 {
@@ -610,6 +618,7 @@ static const struct v4l2_ioctl_ops coda_ioctl_ops = {
 
 	.vidioc_qbuf		= vidioc_qbuf,
 	.vidioc_dqbuf		= vidioc_dqbuf,
+	.vidioc_create_bufs	= vidioc_create_bufs,
 
 	.vidioc_streamon	= vidioc_streamon,
 	.vidioc_streamoff	= vidioc_streamoff,

drivers/media/platform/davinci/vpbe_display.c

@@ -916,6 +916,21 @@ static int vpbe_display_s_fmt(struct file *file, void *priv,
 	other video window */
 
 	layer->pix_fmt = *pixfmt;
+	if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) {
+		struct vpbe_layer *otherlayer;
+
+		otherlayer = _vpbe_display_get_other_win_layer(disp_dev, layer);
+		/* if other layer is available, only
+		 * claim it, do not configure it
+		 */
+		ret = osd_device->ops.request_layer(osd_device,
+						    otherlayer->layer_info.id);
+		if (ret < 0) {
+			v4l2_err(&vpbe_dev->v4l2_dev,
+				 "Display Manager failed to allocate layer\n");
+			return -EBUSY;
+		}
+	}
 
 	/* Get osd layer config */
 	osd_device->ops.get_layer_config(osd_device,

drivers/media/platform/davinci/vpfe_capture.c

@@ -1837,7 +1837,7 @@ static int vpfe_probe(struct platform_device *pdev)
 	if (NULL == ccdc_cfg) {
 		v4l2_err(pdev->dev.driver,
 			 "Memory allocation failed for ccdc_cfg\n");
-		goto probe_free_lock;
+		goto probe_free_dev_mem;
 	}
 
 	mutex_lock(&ccdc_lock);
@@ -1991,7 +1991,6 @@ probe_out_release_irq:
 	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
 probe_free_ccdc_cfg_mem:
 	kfree(ccdc_cfg);
-probe_free_lock:
 	mutex_unlock(&ccdc_lock);
 probe_free_dev_mem:
 	kfree(vpfe_dev);

drivers/media/platform/exynos4-is/fimc-is-regs.c

@@ -174,7 +174,7 @@ int fimc_is_hw_change_mode(struct fimc_is *is)
 		HIC_CAPTURE_STILL, HIC_CAPTURE_VIDEO,
 	};
 
-	if (WARN_ON(is->config_index > ARRAY_SIZE(cmd)))
+	if (WARN_ON(is->config_index >= ARRAY_SIZE(cmd)))
 		return -EINVAL;
 
 	mcuctl_write(cmd[is->config_index], is, MCUCTL_REG_ISSR(0));

drivers/media/platform/exynos4-is/fimc-is.c

@@ -48,7 +48,6 @@ static char *fimc_is_clocks[ISS_CLKS_MAX] = {
 	[ISS_CLK_LITE0]			= "lite0",
 	[ISS_CLK_LITE1]			= "lite1",
 	[ISS_CLK_MPLL]			= "mpll",
-	[ISS_CLK_SYSREG]		= "sysreg",
 	[ISS_CLK_ISP]			= "isp",
 	[ISS_CLK_DRC]			= "drc",
 	[ISS_CLK_FD]			= "fd",
@@ -71,7 +70,6 @@ static void fimc_is_put_clocks(struct fimc_is *is)
 	for (i = 0; i < ISS_CLKS_MAX; i++) {
 		if (IS_ERR(is->clocks[i]))
 			continue;
-		clk_unprepare(is->clocks[i]);
 		clk_put(is->clocks[i]);
 		is->clocks[i] = ERR_PTR(-EINVAL);
 	}
@@ -90,12 +88,6 @@ static int fimc_is_get_clocks(struct fimc_is *is)
 			ret = PTR_ERR(is->clocks[i]);
 			goto err;
 		}
-		ret = clk_prepare(is->clocks[i]);
-		if (ret < 0) {
-			clk_put(is->clocks[i]);
-			is->clocks[i] = ERR_PTR(-EINVAL);
-			goto err;
-		}
 	}
 
 	return 0;
@@ -103,7 +95,7 @@ err:
 	fimc_is_put_clocks(is);
 	dev_err(&is->pdev->dev, "failed to get clock: %s\n",
 		fimc_is_clocks[i]);
-	return -ENXIO;
+	return ret;
 }
 
 static int fimc_is_setup_clocks(struct fimc_is *is)
@@ -144,7 +136,7 @@ int fimc_is_enable_clocks(struct fimc_is *is)
 	for (i = 0; i < ISS_GATE_CLKS_MAX; i++) {
 		if (IS_ERR(is->clocks[i]))
 			continue;
-		ret = clk_enable(is->clocks[i]);
+		ret = clk_prepare_enable(is->clocks[i]);
 		if (ret < 0) {
 			dev_err(&is->pdev->dev, "clock %s enable failed\n",
 				fimc_is_clocks[i]);
@@ -163,7 +155,7 @@ void fimc_is_disable_clocks(struct fimc_is *is)
 
 	for (i = 0; i < ISS_GATE_CLKS_MAX; i++) {
 		if (!IS_ERR(is->clocks[i])) {
-			clk_disable(is->clocks[i]);
+			clk_disable_unprepare(is->clocks[i]);
 			pr_debug("disabled clock: %s\n", fimc_is_clocks[i]);
 		}
 	}
@@ -326,6 +318,11 @@ int fimc_is_start_firmware(struct fimc_is *is)
 	struct device *dev = &is->pdev->dev;
 	int ret;
 
+	if (is->fw.f_w == NULL) {
+		dev_err(dev, "firmware is not loaded\n");
+		return -EINVAL;
+	}
+
 	memcpy(is->memory.vaddr, is->fw.f_w->data, is->fw.f_w->size);
 	wmb();
 
@@ -837,23 +834,11 @@ static int fimc_is_probe(struct platform_device *pdev)
 		goto err_clk;
 	}
 	pm_runtime_enable(dev);
-	/*
-	 * Enable only the ISP power domain, keep FIMC-IS clocks off until
-	 * the whole clock tree is configured. The ISP power domain needs
-	 * be active in order to acces any CMU_ISP clock registers.
-	 */
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0)
-		goto err_irq;
-
-	ret = fimc_is_setup_clocks(is);
-	pm_runtime_put_sync(dev);
 
+	ret = pm_runtime_get_sync(dev);
 	if (ret < 0)
 		goto err_irq;
 
-	is->clk_init = true;
-
 	is->alloc_ctx = vb2_dma_contig_init_ctx(dev);
 	if (IS_ERR(is->alloc_ctx)) {
 		ret = PTR_ERR(is->alloc_ctx);
@@ -875,6 +860,8 @@ static int fimc_is_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto err_dfs;
 
+	pm_runtime_put_sync(dev);
+
 	dev_dbg(dev, "FIMC-IS registered successfully\n");
 	return 0;
 
@@ -894,9 +881,11 @@ err_clk:
 static int fimc_is_runtime_resume(struct device *dev)
 {
 	struct fimc_is *is = dev_get_drvdata(dev);
+	int ret;
 
-	if (!is->clk_init)
-		return 0;
+	ret = fimc_is_setup_clocks(is);
+	if (ret)
+		return ret;
 
 	return fimc_is_enable_clocks(is);
 }
@@ -905,9 +894,7 @@ static int fimc_is_runtime_suspend(struct device *dev)
 {
 	struct fimc_is *is = dev_get_drvdata(dev);
 
-	if (is->clk_init)
-		fimc_is_disable_clocks(is);
-
+	fimc_is_disable_clocks(is);
 	return 0;
 }
 
@@ -941,7 +928,8 @@ static int fimc_is_remove(struct platform_device *pdev)
 	vb2_dma_contig_cleanup_ctx(is->alloc_ctx);
 	fimc_is_put_clocks(is);
 	fimc_is_debugfs_remove(is);
-	release_firmware(is->fw.f_w);
+	if (is->fw.f_w)
+		release_firmware(is->fw.f_w);
 	fimc_is_free_cpu_memory(is);
 
 	return 0;

drivers/media/platform/exynos4-is/fimc-is.h

@@ -73,7 +73,6 @@ enum {
 	ISS_CLK_LITE0,
 	ISS_CLK_LITE1,
 	ISS_CLK_MPLL,
-	ISS_CLK_SYSREG,
 	ISS_CLK_ISP,
 	ISS_CLK_DRC,
 	ISS_CLK_FD,
@@ -265,7 +264,6 @@ struct fimc_is {
 	spinlock_t			slock;
 
 	struct clk			*clocks[ISS_CLKS_MAX];
-	bool				clk_init;
 	void __iomem			*regs;
 	void __iomem			*pmu_regs;
 	int				irq;

drivers/media/platform/exynos4-is/fimc-isp.c

@@ -138,7 +138,7 @@ static int fimc_isp_subdev_get_fmt(struct v4l2_subdev *sd,
 		return 0;
 	}
 
-	mf->colorspace = V4L2_COLORSPACE_JPEG;
+	mf->colorspace = V4L2_COLORSPACE_SRGB;
 
 	mutex_lock(&isp->subdev_lock);
 	__is_get_frame_size(is, &cur_fmt);
@@ -194,7 +194,7 @@ static int fimc_isp_subdev_set_fmt(struct v4l2_subdev *sd,
 	v4l2_dbg(1, debug, sd, "%s: pad%d: code: 0x%x, %dx%d\n",
 		 __func__, fmt->pad, mf->code, mf->width, mf->height);
 
-	mf->colorspace = V4L2_COLORSPACE_JPEG;
+	mf->colorspace = V4L2_COLORSPACE_SRGB;
 
 	mutex_lock(&isp->subdev_lock);
 	__isp_subdev_try_format(isp, fmt);

drivers/media/platform/exynos4-is/mipi-csis.c

@@ -746,7 +746,7 @@ static int s5pcsis_parse_dt(struct platform_device *pdev,
 	node = v4l2_of_get_next_endpoint(node, NULL);
 	if (!node) {
 		dev_err(&pdev->dev, "No port node at %s\n",
-					node->full_name);
+				pdev->dev.of_node->full_name);
 		return -EINVAL;
 	}
 	/* Get port node and validate MIPI-CSI channel id. */

drivers/media/platform/s3c-camif/camif-core.h

@@ -229,7 +229,7 @@ struct camif_vp {
 	unsigned int		state;
 	u16			fmt_flags;
 	u8			id;
-	u8			rotation;
+	u16			rotation;
 	u8			hflip;
 	u8			vflip;
 	unsigned int		offset;

drivers/media/platform/s5p-jpeg/Makefile

@@ -1,2 +1,2 @@
 s5p-jpeg-objs := jpeg-core.o
-obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) := s5p-jpeg.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) += s5p-jpeg.o

drivers/media/platform/s5p-mfc/Makefile

@@ -1,4 +1,4 @@
-obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) := s5p-mfc.o
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc.o
 s5p-mfc-y += s5p_mfc.o s5p_mfc_intr.o
 s5p-mfc-y += s5p_mfc_dec.o s5p_mfc_enc.o
 s5p-mfc-y += s5p_mfc_ctrl.o s5p_mfc_pm.o

drivers/media/platform/s5p-mfc/s5p_mfc.c

@@ -397,7 +397,7 @@ static void s5p_mfc_handle_frame(struct s5p_mfc_ctx *ctx,
 leave_handle_frame:
 	spin_unlock_irqrestore(&dev->irqlock, flags);
 	if ((ctx->src_queue_cnt == 0 && ctx->state != MFCINST_FINISHING)
-				    || ctx->dst_queue_cnt < ctx->dpb_count)
+				    || ctx->dst_queue_cnt < ctx->pb_count)
 		clear_work_bit(ctx);
 	s5p_mfc_hw_call(dev->mfc_ops, clear_int_flags, dev);
 	wake_up_ctx(ctx, reason, err);
@@ -473,7 +473,7 @@ static void s5p_mfc_handle_seq_done(struct s5p_mfc_ctx *ctx,
 
 		s5p_mfc_hw_call(dev->mfc_ops, dec_calc_dpb_size, ctx);
 
-		ctx->dpb_count = s5p_mfc_hw_call(dev->mfc_ops, get_dpb_count,
+		ctx->pb_count = s5p_mfc_hw_call(dev->mfc_ops, get_dpb_count,
 				dev);
 		ctx->mv_count = s5p_mfc_hw_call(dev->mfc_ops, get_mv_count,
 				dev);
@@ -562,7 +562,7 @@ static void s5p_mfc_handle_stream_complete(struct s5p_mfc_ctx *ctx,
 	struct s5p_mfc_dev *dev = ctx->dev;
 	struct s5p_mfc_buf *mb_entry;
 
-	mfc_debug(2, "Stream completed");
+	mfc_debug(2, "Stream completed\n");
 
 	s5p_mfc_clear_int_flags(dev);
 	ctx->int_type = reason;
@@ -1362,7 +1362,6 @@ static struct s5p_mfc_variant mfc_drvdata_v5 = {
 	.port_num	= MFC_NUM_PORTS,
 	.buf_size	= &buf_size_v5,
 	.buf_align	= &mfc_buf_align_v5,
-	.mclk_name	= "sclk_mfc",
 	.fw_name	= "s5p-mfc.fw",
 };
 
@@ -1389,7 +1388,6 @@ static struct s5p_mfc_variant mfc_drvdata_v6 = {
 	.port_num	= MFC_NUM_PORTS_V6,
 	.buf_size	= &buf_size_v6,
 	.buf_align	= &mfc_buf_align_v6,
-	.mclk_name      = "aclk_333",
 	.fw_name        = "s5p-mfc-v6.fw",
 };
 

drivers/media/platform/s5p-mfc/s5p_mfc_common.h

@@ -138,6 +138,7 @@ enum s5p_mfc_inst_state {
 	MFCINST_INIT = 100,
 	MFCINST_GOT_INST,
 	MFCINST_HEAD_PARSED,
+	MFCINST_HEAD_PRODUCED,
 	MFCINST_BUFS_SET,
 	MFCINST_RUNNING,
 	MFCINST_FINISHING,
@@ -231,7 +232,6 @@ struct s5p_mfc_variant {
 	unsigned int port_num;
 	struct s5p_mfc_buf_size *buf_size;
 	struct s5p_mfc_buf_align *buf_align;
-	char	*mclk_name;
 	char	*fw_name;
 };
 
@@ -438,7 +438,7 @@ struct s5p_mfc_enc_params {
 	u32 rc_framerate_num;
 	u32 rc_framerate_denom;
 
-	union {
+	struct {
 		struct s5p_mfc_h264_enc_params h264;
 		struct s5p_mfc_mpeg4_enc_params mpeg4;
 	} codec;
@@ -602,7 +602,7 @@ struct s5p_mfc_ctx {
 	int after_packed_pb;
 	int sei_fp_parse;
 
-	int dpb_count;
+	int pb_count;
 	int total_dpb_count;
 	int mv_count;
 	/* Buffers */

drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c

@@ -38,7 +38,7 @@ int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev)
 	dev->fw_virt_addr = dma_alloc_coherent(dev->mem_dev_l, dev->fw_size,
 					&dev->bank1, GFP_KERNEL);
 
-	if (IS_ERR(dev->fw_virt_addr)) {
+	if (IS_ERR_OR_NULL(dev->fw_virt_addr)) {
 		dev->fw_virt_addr = NULL;
 		mfc_err("Allocating bitprocessor buffer failed\n");
 		return -ENOMEM;

drivers/media/platform/s5p-mfc/s5p_mfc_debug.h

@@ -30,8 +30,8 @@ extern int debug;
 #define mfc_debug(level, fmt, args...)
 #endif
 
-#define mfc_debug_enter() mfc_debug(5, "enter")
-#define mfc_debug_leave() mfc_debug(5, "leave")
+#define mfc_debug_enter() mfc_debug(5, "enter\n")
+#define mfc_debug_leave() mfc_debug(5, "leave\n")
 
 #define mfc_err(fmt, args...)				\
 	do {						\