serial/8250: Add suport for later SUNIX (TIMEDIA) boards.

Add support for later SUNIX (TIMEDIA) Universal PCI Single and Multi-Port
Communications Boards.

These boards have PCI Vendor ID 1fd4 with device ID 1999 but otherwise
appear to be the same as the TIMEDIA boards already supported by 8250_pci
and parport_serial.

Tested with:

	a. the two port serial board part number SER5037A,
	b. the two port serial and one port parallel board part number
	   MIO5079A.

Signed-off-by: Stephen Chivers <schivers@csc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/parport/parport_serial.c

@@ -63,6 +63,7 @@ enum parport_pc_pci_cards {
 	timedia_9079b,
 	timedia_9079c,
 	wch_ch353_2s1p,
+	sunix_2s1p,
 };
 
 /* each element directly indexed from enum list, above */
@@ -148,8 +149,12 @@ static struct parport_pc_pci cards[] = {
 	/* timedia_9079b */             { 1, { { 2, 3 }, } },
 	/* timedia_9079c */             { 1, { { 2, 3 }, } },
 	/* wch_ch353_2s1p*/             { 1, { { 2, -1}, } },
+	/* sunix_2s1p */                { 1, { { 3, -1 }, } },
 };
 
+#define PCI_VENDOR_ID_SUNIX		0x1fd4
+#define PCI_DEVICE_ID_SUNIX_1999	0x1999
+
 static struct pci_device_id parport_serial_pci_tbl[] = {
 	/* PCI cards */
 	{ PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L,
@@ -246,8 +251,18 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
 	{ 0x1409, 0x7168, 0x1409, 0xb079, 0, 0, timedia_9079a },
 	{ 0x1409, 0x7168, 0x1409, 0xc079, 0, 0, timedia_9079b },
 	{ 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
+
 	/* WCH CARDS */
 	{ 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
+
+	/*
+	 * More SUNIX variations. At least one of these has part number
+	 * '5079A but subdevice 0x102. That board reports 0x0708 as
+	 * its PCI Class.
+	 */
+	{ PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, PCI_VENDOR_ID_SUNIX,
+	  0x0102, 0, 0, sunix_2s1p },
+
 	{ 0, } /* terminate list */
 };
 MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl);
@@ -470,6 +485,12 @@ static struct pciserial_board pci_parport_serial_boards[] = {
 		.base_baud      = 115200,
 		.uart_offset    = 8,
 	},
+	[sunix_2s1p] = {
+		.flags		= FL_BASE0|FL_BASE_BARS,
+		.num_ports	= 2,
+		.base_baud	= 921600,
+		.uart_offset	= 8,
+	},
 };
 
 struct parport_serial_private {

drivers/tty/serial/8250/8250_pci.c

@@ -1565,6 +1565,9 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_COMMTECH_4222PCIE	0x0022
 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a
 
+#define PCI_VENDOR_ID_SUNIX		0x1fd4
+#define PCI_DEVICE_ID_SUNIX_1999	0x1999
+
 
 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */
 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584	0x1584
@@ -1960,6 +1963,23 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
 		.subdevice	= PCI_ANY_ID,
 		.setup		= pci_timedia_setup,
 	},
+	/*
+	 * SUNIX (Timedia) cards
+	 * Do not "probe" for these cards as there is at least one combination
+	 * card that should be handled by parport_pc that doesn't match the
+	 * rule in pci_timedia_probe.
+	 * It is part number is MIO5079A but its subdevice ID is 0x0102.
+	 * There are some boards with part number SER5037AL that report
+	 * subdevice ID 0x0002.
+	 */
+	{
+		.vendor		= PCI_VENDOR_ID_SUNIX,
+		.device		= PCI_DEVICE_ID_SUNIX_1999,
+		.subvendor	= PCI_VENDOR_ID_SUNIX,
+		.subdevice	= PCI_ANY_ID,
+		.init		= pci_timedia_init,
+		.setup		= pci_timedia_setup,
+	},
 	/*
 	 * Exar cards
 	 */
@@ -4210,6 +4230,19 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
 		pbn_b0_bt_1_921600 },
 
+	/*
+	 * SUNIX (TIMEDIA)
+	 */
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xffff00,
+		pbn_b0_bt_1_921600 },
+
+	{	PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+		PCI_VENDOR_ID_SUNIX, PCI_ANY_ID,
+		PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
+		pbn_b0_bt_1_921600 },
+
 	/*
 	 * AFAVLAB serial card, from Harald Welte <laforge@gnumonks.org>
 	 */