MII: fix Kconfig dependencies for MII

MII Kconfig option is apart of the core networking drivers and
by default NET_CORE is enabled so drivers selecting MII will
have MII enabled as well.  It was found using the randconfig
option during testing, MII would be selected but NET_CORE
could be disabled.  This caused a dependency error.

Resolved the dependency by selecting NET_CORE when MII is
selected.

Reported-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

arch/cris/arch-v10/drivers/Kconfig

@@ -4,6 +4,7 @@ config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V10
 	select NET_ETHERNET
+	select NET_CORE
 	select MII
 	help
 	  This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet

arch/cris/arch-v32/drivers/Kconfig

@@ -4,6 +4,7 @@ config ETRAX_ETHERNET
 	bool "Ethernet support"
 	depends on ETRAX_ARCH_V32
 	select NET_ETHERNET
+	select NET_CORE
 	select MII
 	help
 	  This option enables the ETRAX FS built-in 10/100Mbit Ethernet

drivers/net/ethernet/3com/Kconfig

@@ -81,6 +81,7 @@ config PCMCIA_3C589
 config VORTEX
 	tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
 	depends on (PCI || EISA)
+	select NET_CORE
 	select MII
 	---help---
 	  This option enables driver support for a large number of 10Mbps and

drivers/net/ethernet/Kconfig

@@ -62,6 +62,7 @@ config JME
 	tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  This driver supports the PCI-Express gigabit ethernet adapters
@@ -102,6 +103,7 @@ config FEALNX
 	tristate "Myson MTD-8xx PCI Ethernet support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
@@ -112,6 +114,7 @@ source "drivers/net/ethernet/8390/Kconfig"
 
 config NET_NETX
 	tristate "NetX Ethernet support"
+	select NET_CORE
 	select MII
 	depends on ARCH_NETX
 	---help---
@@ -128,6 +131,7 @@ source "drivers/net/ethernet/oki-semi/Kconfig"
 config ETHOC
 	tristate "OpenCores 10/100 Mbps Ethernet MAC support"
 	depends on HAS_IOMEM && HAS_DMA
+	select NET_CORE
 	select MII
 	select PHYLIB
 	select CRC32

drivers/net/ethernet/adaptec/Kconfig

@@ -22,6 +22,7 @@ config ADAPTEC_STARFIRE
 	tristate "Adaptec Starfire/DuraLAN support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  Say Y here if you have an Adaptec Starfire (or DuraLAN) PCI network

drivers/net/ethernet/adi/Kconfig

@@ -23,6 +23,7 @@ config BFIN_MAC
 	tristate "Blackfin on-chip MAC support"
 	depends on (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
 	select CRC32
+	select NET_CORE
 	select MII
 	select PHYLIB
 	select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE

drivers/net/ethernet/amd/Kconfig

@@ -34,6 +34,7 @@ config AMD8111_ETH
 	tristate "AMD 8111 (new PCI LANCE) support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  If you have an AMD 8111-based PCI LANCE ethernet card,
@@ -59,6 +60,7 @@ config PCNET32
 	tristate "AMD PCnet32 PCI support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,

drivers/net/ethernet/atheros/Kconfig

@@ -22,6 +22,7 @@ config ATL2
 	tristate "Atheros L2 Fast Ethernet support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  This driver supports the Atheros L2 fast ethernet adapter.
@@ -33,6 +34,7 @@ config ATL1
 	tristate "Atheros/Attansic L1 Gigabit Ethernet support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  This driver supports the Atheros/Attansic L1 gigabit ethernet
@@ -45,6 +47,7 @@ config ATL1E
 	tristate "Atheros L1E Gigabit Ethernet support (EXPERIMENTAL)"
 	depends on PCI && EXPERIMENTAL
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  This driver supports the Atheros L1E gigabit ethernet adapter.
@@ -56,6 +59,7 @@ config ATL1C
 	tristate "Atheros L1C Gigabit Ethernet support (EXPERIMENTAL)"
 	depends on PCI && EXPERIMENTAL
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  This driver supports the Atheros L1C gigabit ethernet adapter.

drivers/net/ethernet/broadcom/Kconfig

@@ -22,6 +22,7 @@ config B44
 	tristate "Broadcom 440x/47xx ethernet support"
 	depends on SSB_POSSIBLE && HAS_DMA
 	select SSB
+	select NET_CORE
 	select MII
 	---help---
 	  If you have a network (Ethernet) controller of this type, say Y
@@ -53,6 +54,7 @@ config B44_PCI
 config BCM63XX_ENET
 	tristate "Broadcom 63xx internal mac support"
 	depends on BCM63XX
+	select NET_CORE
 	select MII
 	select PHYLIB
 	help

drivers/net/ethernet/cadence/Kconfig

@@ -25,6 +25,7 @@ if NET_ATMEL
 config ARM_AT91_ETHER
 	tristate "AT91RM9200 Ethernet support"
 	depends on ARM && ARCH_AT91RM9200
+	select NET_CORE
 	select MII
 	---help---
 	  If you wish to compile a kernel for the AT91RM9200 and enable

drivers/net/ethernet/cirrus/Kconfig

@@ -21,6 +21,7 @@ if NET_VENDOR_CIRRUS
 config EP93XX_ETH
 	tristate "EP93xx Ethernet support"
 	depends on ARM && ARCH_EP93XX
+	select NET_CORE
 	select MII
 	help
 	  This is a driver for the ethernet hardware included in EP93xx CPUs.

drivers/net/ethernet/davicom/Kconfig

@@ -6,6 +6,7 @@ config DM9000
 	tristate "DM9000 support"
 	depends on ARM || BLACKFIN || MIPS
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  Support for DM9000 chipset.

drivers/net/ethernet/dec/tulip/Kconfig

@@ -125,6 +125,7 @@ config WINBOND_840
 	tristate "Winbond W89c840 Ethernet support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  This driver is for the Winbond W89c840 chip.  It also works with 

drivers/net/ethernet/dlink/Kconfig

@@ -66,6 +66,7 @@ config SUNDANCE
 	tristate "Sundance Alta support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  This driver is for the Sundance "Alta" chip.

drivers/net/ethernet/faraday/Kconfig

@@ -21,6 +21,7 @@ if NET_VENDOR_FARADAY
 config FTMAC100
 	tristate "Faraday FTMAC100 10/100 Ethernet support"
 	depends on ARM
+	select NET_CORE
 	select MII
 	---help---
 	  This driver supports the FTMAC100 10/100 Ethernet controller

drivers/net/ethernet/freescale/fs_enet/Kconfig

@@ -1,6 +1,7 @@
 config FS_ENET
        tristate "Freescale Ethernet Driver"
        depends on NET_VENDOR_FREESCALE && (CPM1 || CPM2 || PPC_MPC512x)
+       select NET_CORE
        select MII
        select PHYLIB
 

drivers/net/ethernet/icplus/Kconfig

@@ -5,6 +5,7 @@
 config IP1000
 	tristate "IP1000 Gigabit Ethernet support"
 	depends on PCI && EXPERIMENTAL
+	select NET_CORE
 	select MII
 	---help---
 	  This driver supports IP1000 gigabit Ethernet cards.

drivers/net/ethernet/intel/Kconfig

@@ -21,6 +21,7 @@ if NET_VENDOR_INTEL
 config E100
 	tristate "Intel(R) PRO/100+ support"
 	depends on PCI
+	select NET_CORE
 	select MII
 	---help---
 	  This driver supports Intel(R) PRO/100 family of adapters.

drivers/net/ethernet/micrel/Kconfig

@@ -22,6 +22,7 @@ if NET_VENDOR_MICREL
 config ARM_KS8695_ETHER
 	tristate "KS8695 Ethernet support"
 	depends on ARM && ARCH_KS8695
+	select NET_CORE
 	select MII
 	---help---
 	  If you wish to compile a kernel for the KS8695 and want to
@@ -38,6 +39,7 @@ config KS8842
 config KS8851
 	tristate "Micrel KS8851 SPI"
 	depends on SPI
+	select NET_CORE
 	select MII
 	select CRC32
 	---help---
@@ -46,6 +48,7 @@ config KS8851
 config KS8851_MLL
 	tristate "Micrel KS8851 MLL"
 	depends on HAS_IOMEM
+	select NET_CORE
 	select MII
 	---help---
 	  This platform driver is for Micrel KS8851 Address/data bus
@@ -54,6 +57,7 @@ config KS8851_MLL
 config KSZ884X_PCI
 	tristate "Micrel KSZ8841/2 PCI"
 	depends on PCI
+	select NET_CORE
 	select MII
 	select CRC32
 	---help---

drivers/net/ethernet/nuvoton/Kconfig

@@ -22,6 +22,7 @@ config W90P910_ETH
 	tristate "Nuvoton w90p910 Ethernet support"
 	depends on ARM && ARCH_W90X900
 	select PHYLIB
+	select NET_CORE
 	select MII
 	---help---
 	  Say Y here if you want to use built-in Ethernet ports

drivers/net/ethernet/oki-semi/pch_gbe/Kconfig

@@ -5,6 +5,7 @@
 config PCH_GBE
 	tristate "OKI SEMICONDUCTOR ML7223 IOH GbE (Intel EG20T PCH)"
 	depends on PCI
+	select NET_CORE
 	select MII
 	---help---
 	  This is a gigabit ethernet driver for EG20T PCH.

drivers/net/ethernet/packetengines/Kconfig

@@ -20,6 +20,7 @@ if NET_PACKET_ENGINE
 config HAMACHI
 	tristate "Packet Engines Hamachi GNIC-II support"
 	depends on PCI
+	select NET_CORE
 	select MII
 	---help---
 	  If you have a Gigabit Ethernet card of this type, say Y and read

drivers/net/ethernet/rdc/Kconfig

@@ -22,6 +22,7 @@ config R6040
 	tristate "RDC R6040 Fast Ethernet Adapter support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	select PHYLIB
 	---help---

drivers/net/ethernet/realtek/Kconfig

@@ -37,6 +37,7 @@ config 8139CP
 	tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support (EXPERIMENTAL)"
 	depends on PCI && EXPERIMENTAL
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  This is a driver for the Fast Ethernet PCI network cards based on
@@ -51,6 +52,7 @@ config 8139TOO
 	tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  This is a driver for the Fast Ethernet PCI network cards based on
@@ -105,6 +107,7 @@ config R8169
 	depends on PCI
 	select FW_LOADER
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.

drivers/net/ethernet/renesas/Kconfig

@@ -9,6 +9,7 @@ config SH_ETH
 		 CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7619 || \
 		 CPU_SUBTYPE_SH7724 || CPU_SUBTYPE_SH7757)
 	select CRC32
+	select NET_CORE
 	select MII
 	select MDIO_BITBANG
 	select PHYLIB

drivers/net/ethernet/sgi/Kconfig

@@ -22,6 +22,7 @@ config SGI_IOC3_ETH
 	bool "SGI IOC3 Ethernet"
 	depends on PCI && SGI_IP27
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  If you have a network (Ethernet) card of this type, say Y and read

drivers/net/ethernet/sis/Kconfig

@@ -22,6 +22,7 @@ config SIS900
 	tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  This is a driver for the Fast Ethernet PCI network cards based on
@@ -38,6 +39,7 @@ config SIS190
 	tristate "SiS190/SiS191 gigabit ethernet support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or

drivers/net/ethernet/smsc/Kconfig

@@ -37,6 +37,7 @@ config SMC9194
 config SMC91X
 	tristate "SMC 91C9x/91C1xxx support"
 	select CRC32
+	select NET_CORE
 	select MII
 	depends on (ARM || M32R || SUPERH || MIPS || BLACKFIN || \
 		    MN10300 || COLDFIRE)
@@ -56,6 +57,7 @@ config PCMCIA_SMC91C92
 	tristate "SMC 91Cxx PCMCIA support"
 	depends on PCMCIA
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
@@ -68,6 +70,7 @@ config EPIC100
 	tristate "SMC EtherPower II"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  This driver is for the SMC EtherPower II 9432 PCI Ethernet NIC,
@@ -78,6 +81,7 @@ config EPIC100
 config SMC911X
 	tristate "SMSC LAN911[5678] support"
 	select CRC32
+	select NET_CORE
 	select MII
 	depends on (ARM || SUPERH || MN10300)
 	---help---
@@ -95,6 +99,7 @@ config SMSC911X
 	tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
 	depends on (ARM || SUPERH || BLACKFIN || MIPS || MN10300)
 	select CRC32
+	select NET_CORE
 	select MII
 	select PHYLIB
 	---help---

drivers/net/ethernet/stmicro/stmmac/Kconfig

@@ -1,6 +1,7 @@
 config STMMAC_ETH
 	tristate "STMicroelectronics 10/100/1000 Ethernet driver"
 	depends on HAS_IOMEM
+	select NET_CORE
 	select MII
 	select PHYLIB
 	select CRC32

drivers/net/ethernet/via/Kconfig

@@ -22,6 +22,7 @@ config VIA_RHINE
 	tristate "VIA Rhine support"
 	depends on PCI
 	select CRC32
+	select NET_CORE
 	select MII
 	---help---
 	  If you have a VIA "Rhine" based network card (Rhine-I (VT86C100A),
@@ -47,6 +48,7 @@ config VIA_VELOCITY
 	depends on PCI
 	select CRC32
 	select CRC_CCITT
+	select NET_CORE
 	select MII
 	---help---
 	  If you have a VIA "Velocity" based network card say Y here.

drivers/net/usb/Kconfig

@@ -68,6 +68,7 @@ config USB_KAWETH
 
 config USB_PEGASUS
 	tristate "USB Pegasus/Pegasus-II based ethernet device support"
+	select NET_CORE
 	select MII
 	---help---
 	  Say Y here if you know you have Pegasus or Pegasus-II based adapter.
@@ -84,6 +85,7 @@ config USB_PEGASUS
 config USB_RTL8150
 	tristate "USB RTL8150 based ethernet device support (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
+	select NET_CORE
 	select MII
 	help
 	  Say Y here if you have RTL8150 based usb-ethernet adapter.
@@ -95,6 +97,7 @@ config USB_RTL8150
 
 config USB_USBNET
 	tristate "Multi-purpose USB Networking Framework"
+	select NET_CORE
 	select MII
 	---help---
 	  This driver supports several kinds of network links over USB,