staging: comedi: ni_labpc: remove 'bustype' from boardinfo

The 'bustype' in the boardinfo is not used. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/ni_labpc.c

@@ -239,7 +239,6 @@ static const struct labpc_boardinfo labpc_boards[] = {
 	{
 		.name			= "lab-pc-1200",
 		.ai_speed		= 10000,
-		.bustype		= isa_bustype,
 		.register_layout	= labpc_1200_layout,
 		.has_ao			= 1,
 		.ai_range_table		= &range_labpc_1200_ai,
@@ -248,7 +247,6 @@ static const struct labpc_boardinfo labpc_boards[] = {
 	}, {
 		.name			= "lab-pc-1200ai",
 		.ai_speed		= 10000,
-		.bustype		= isa_bustype,
 		.register_layout	= labpc_1200_layout,
 		.ai_range_table		= &range_labpc_1200_ai,
 		.ai_range_code		= labpc_1200_ai_gain_bits,
@@ -256,7 +254,6 @@ static const struct labpc_boardinfo labpc_boards[] = {
 	}, {
 		.name			= "lab-pc+",
 		.ai_speed		= 12000,
-		.bustype		= isa_bustype,
 		.register_layout	= labpc_plus_layout,
 		.has_ao			= 1,
 		.ai_range_table		= &range_labpc_plus_ai,

drivers/staging/comedi/drivers/ni_labpc.h

@@ -27,7 +27,6 @@
 #define EEPROM_SIZE	256	/*  256 byte eeprom */
 #define NUM_AO_CHAN	2	/*  boards have two analog output channels */
 
-enum labpc_bustype { isa_bustype, pci_bustype, pcmcia_bustype };
 enum labpc_register_layout { labpc_plus_layout, labpc_1200_layout };
 enum transfer_type { fifo_not_empty_transfer, fifo_half_full_transfer,
 	isa_dma_transfer
@@ -37,7 +36,6 @@ struct labpc_boardinfo {
 	const char *name;
 	int device_id;		/*  device id for pci and pcmcia boards */
 	int ai_speed;		/*  maximum input speed in nanoseconds */
-	enum labpc_bustype bustype;	/*  ISA/PCI/etc. */
 
 	/*  1200 has extra registers compared to pc+ */
 	enum labpc_register_layout register_layout;

drivers/staging/comedi/drivers/ni_labpc_cs.c

@@ -78,7 +78,6 @@ static const struct labpc_boardinfo labpc_cs_boards[] = {
 		.name			= "daqcard-1200",
 		.device_id		= 0x103,
 		.ai_speed		= 10000,
-		.bustype		= pcmcia_bustype,
 		.register_layout	= labpc_1200_layout,
 		.has_ao			= 1,
 		.ai_range_table		= &range_labpc_1200_ai,

drivers/staging/comedi/drivers/ni_labpc_pci.c

@@ -50,7 +50,6 @@ static const struct labpc_boardinfo labpc_pci_boards[] = {
 	[BOARD_NI_PCI1200] = {
 		.name			= "ni_pci-1200",
 		.ai_speed		= 10000,
-		.bustype		= pci_bustype,
 		.register_layout	= labpc_1200_layout,
 		.has_ao			= 1,
 		.ai_range_table		= &range_labpc_1200_ai,