Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (37 commits)
  SH: catch negative denormal_subf1() retval in denormal_add()
  sh: Fix DMAC base address for SH7709S
  sh: update smc91x platform data for se7206.
  sh: Stub in cpu_to_node() and friends for NUMA build.
  sh: intc register modify fix
  sh: no high level trigger on some sh3 cpus
  sh: clean up sh7710 and sh7720 intc tables
  sh: add interrupt ack code to sh3
  sh: unify external irq pin code for sh3
  sh-sci: avoid writing to nonexistent registers
  sh-sci: sh7722 lacks scsptr registers
  sh-sci: improve sh7722 support
  sh: reset hardware from early printk
  sh: drain and wait for early printk
  sh: use sci_out() for early printk
  sh: add memory resources to /proc/iomem
  sh: add kernel bss resource
  sh: fix sh7705 interrupt vector typo
  sh: update smc91x platform data for se7722
  sh: update smc91x platform data for MigoR
  ...

arch/sh/Kconfig

@@ -448,14 +448,6 @@ config SH_DREAMCAST
 	  Select Dreamcast if configuring for a SEGA Dreamcast.
 	  More information at <http://www.linux-sh.org>
 
-config SH_MPC1211
-	bool "Interface MPC1211"
-	depends on CPU_SUBTYPE_SH7751 && BROKEN
-	help
-	  CTP/PCI-SH02 is a CPU module computer that is produced
-	  by Interface Corporation.
-	  More information at <http://www.interface.co.jp>
-
 config SH_SH03
 	bool "Interface CTP/PCI-SH03"
 	depends on CPU_SUBTYPE_SH7751
@@ -657,8 +649,7 @@ source "arch/sh/drivers/Kconfig"
 endmenu
 
 config ISA_DMA_API
-	def_bool y
-	depends on SH_MPC1211
+	bool
 
 menu "Kernel features"
 
@@ -666,7 +657,7 @@ source kernel/Kconfig.hz
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	depends on SUPERH32 && EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -683,7 +674,7 @@ config KEXEC
 
 config CRASH_DUMP
 	bool "kernel crash dumps (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	depends on SUPERH32 && EXPERIMENTAL
 	help
 	  Generate crash dump after being started by kexec.
 	  This should be normally only set in special crash dump kernels
@@ -763,7 +754,7 @@ menu "Boot options"
 
 config ZERO_PAGE_OFFSET
 	hex "Zero page offset"
-	default "0x00004000" if SH_MPC1211 || SH_SH03
+	default "0x00004000" if SH_SH03
 	default "0x00010000" if PAGE_SIZE_64KB
 	default "0x00002000" if PAGE_SIZE_8KB
 	default "0x00001000"

arch/sh/Kconfig.debug

@@ -7,6 +7,7 @@ source "lib/Kconfig.debug"
 
 config SH_STANDARD_BIOS
 	bool "Use LinuxSH standard BIOS"
+	depends on SUPERH32
 	help
 	  Say Y here if your target has the gdb-sh-stub
 	  package from www.m17n.org (or any conforming standard LinuxSH BIOS)

arch/sh/Makefile

@@ -110,7 +110,6 @@ machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= se/7343
 machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= se/7721
 machdir-$(CONFIG_SH_HP6XX)			+= hp6xx
 machdir-$(CONFIG_SH_DREAMCAST)			+= dreamcast
-machdir-$(CONFIG_SH_MPC1211)			+= mpc1211
 machdir-$(CONFIG_SH_SH03)			+= sh03
 machdir-$(CONFIG_SH_SECUREEDGE5410)		+= snapgear
 machdir-$(CONFIG_SH_RTS7751R2D)			+= renesas/rts7751r2d

arch/sh/boards/mpc1211/Makefile

@@ -1,8 +0,0 @@
-#
-# Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel
-#
-
-obj-y	 := setup.o rtc.o
-
-obj-$(CONFIG_PCI) += pci.o
-

arch/sh/boards/mpc1211/pci.c

@@ -1,295 +0,0 @@
-/*
- *	Low-Level PCI Support for the MPC-1211(CTP/PCI/MPC-SH02)
- *
- *  (c) 2002-2003 Saito.K & Jeanne
- *
- *  Dustin McIntire (dustin@sensoria.com)
- *	Derived from arch/i386/kernel/pci-*.c which bore the message:
- *	(c) 1999--2000 Martin Mares <mj@ucw.cz>
- *	
- *  May be copied or modified under the terms of the GNU General Public
- *  License.  See linux/COPYING for more information.
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/mpc1211/pci.h>
-
-static struct resource mpcpci_io_resource = {
-	"MPCPCI IO",
-	0x00000000,
-	0xffffffff,
-	IORESOURCE_IO
-};
-
-static struct resource mpcpci_mem_resource = {
-	"MPCPCI mem",
-	0x00000000,
-	0xffffffff,
-	IORESOURCE_MEM
-};
-
-static struct pci_ops pci_direct_conf1;
-struct pci_channel board_pci_channels[] = {
-	{&pci_direct_conf1, &mpcpci_io_resource, &mpcpci_mem_resource, 0, 256},
-	{NULL, NULL, NULL, 0, 0},
-};
-
-/*
- * Direct access to PCI hardware...
- */
-
-
-#define CONFIG_CMD(bus, devfn, where) (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
-
-/*
- * Functions for accessing PCI configuration space with type 1 accesses
- */
-static int pci_conf1_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
-{
-	u32 word;
-	unsigned long flags;
-
-	/* 
-	 * PCIPDR may only be accessed as 32 bit words, 
-	 * so we must do byte alignment by hand 
-	 */
-	local_irq_save(flags);
-	writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
-	word = readl(PCIPDR);
-	local_irq_restore(flags);
-
-	switch (size) {
-	case 1:
-		switch (where & 0x3) {
-		case 3:
-			*value = (u8)(word >> 24);
-			break;
-		case 2:
-			*value = (u8)(word >> 16);
-			break;
-		case 1:
-			*value = (u8)(word >> 8);
-			break;
-		default:
-			*value = (u8)word;
-			break;
-		}
-		break;
-	case 2:
-		switch (where & 0x3) {
-		case 3:
-			*value = (u16)(word >> 24);
-			local_irq_save(flags);
-			writel(CONFIG_CMD(bus,devfn,(where+1)), PCIPAR);
-			word = readl(PCIPDR);
-			local_irq_restore(flags);
-			*value |= ((word & 0xff) << 8);
-			break;
-		case 2:
-			*value = (u16)(word >> 16);
-			break;
-		case 1:
-			*value = (u16)(word >> 8);
-			break;
-		default:
-			*value = (u16)word;
-			break;
-		}
-		break;
-	case 4:
-		*value = word;
-		break;
-	}
-	PCIDBG(4,"pci_conf1_read@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),*value); 
-	return PCIBIOS_SUCCESSFUL;    
-}
-
-/* 
- * Since MPC-1211 only does 32bit access we'll have to do a read,mask,write operation.  
- * We'll allow an odd byte offset, though it should be illegal.
- */ 
-static int pci_conf1_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
-{
-	u32 word,mask = 0;
-	unsigned long flags;
-	u32 shift = (where & 3) * 8;
-
-	if(size == 1) {
-		mask = ((1 << 8) - 1) << shift;  // create the byte mask
-	} else if(size == 2){
-		if(shift == 24)
-			return PCIBIOS_BAD_REGISTER_NUMBER;           
-		mask = ((1 << 16) - 1) << shift;  // create the word mask
-	}
-	local_irq_save(flags);
-	writel(CONFIG_CMD(bus,devfn,where), PCIPAR);
-	if(size == 4){
-		writel(value, PCIPDR);
-		local_irq_restore(flags);
-		PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),value);
-		return PCIBIOS_SUCCESSFUL;
-	}
-	word = readl(PCIPDR);
-	word &= ~mask;
-	word |= ((value << shift) & mask);
-	writel(word, PCIPDR);
-	local_irq_restore(flags);
-	PCIDBG(4,"pci_conf1_write@0x%08x=0x%x\n", CONFIG_CMD(bus,devfn,where),word);
-	return PCIBIOS_SUCCESSFUL;
-}
-
-#undef CONFIG_CMD
-
-static struct pci_ops pci_direct_conf1 = {
-	.read =		pci_conf1_read,
-	.write = 	pci_conf1_write,
-};
-
-static void __devinit quirk_ali_ide_ports(struct pci_dev *dev)
-{
-        dev->resource[0].start = 0x1f0;
-	dev->resource[0].end   = 0x1f7;
-	dev->resource[0].flags = IORESOURCE_IO;
-        dev->resource[1].start = 0x3f6;
-	dev->resource[1].end   = 0x3f6;
-	dev->resource[1].flags = IORESOURCE_IO;
-        dev->resource[2].start = 0x170;
-	dev->resource[2].end   = 0x177;
-	dev->resource[2].flags = IORESOURCE_IO;
-        dev->resource[3].start = 0x376;
-	dev->resource[3].end   = 0x376;
-	dev->resource[3].flags = IORESOURCE_IO;
-        dev->resource[4].start = 0xf000;
-	dev->resource[4].end   = 0xf00f;
-	dev->resource[4].flags = IORESOURCE_IO;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, quirk_ali_ide_ports);
-
-char * __devinit pcibios_setup(char *str)
-{
-	return str;
-}
-
-/*
- *  Called after each bus is probed, but before its children
- *  are examined.
- */
-
-void __devinit pcibios_fixup_bus(struct pci_bus *b)
-{
-	pci_read_bridge_bases(b);
-}
-
-/* 
- * 	IRQ functions 
- */
-static inline u8 bridge_swizzle(u8 pin, u8 slot)
-{
-        return (((pin-1) + slot) % 4) + 1;
-}
-
-static inline u8 bridge_swizzle_pci_1(u8 pin, u8 slot)
-{
-        return (((pin-1) - slot) & 3) + 1;
-}
-
-static u8 __init mpc1211_swizzle(struct pci_dev *dev, u8 *pinp)
-{
-	unsigned long flags;
-        u8 pin = *pinp;
-	u32 word;
-
-	for ( ; dev->bus->self; dev = dev->bus->self) {
-		if (!pin)
-			continue;
-
-		if (dev->bus->number == 1) {
-			local_irq_save(flags);
-			writel(0x80000000 | 0x2c, PCIPAR);
-			word = readl(PCIPDR);
-			local_irq_restore(flags);
-			word >>= 16;
-
-			if (word == 0x0001)
-				pin = bridge_swizzle_pci_1(pin, PCI_SLOT(dev->devfn));
-			else
-				pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
-		} else
-			pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
-	}
-
-	*pinp = pin;
-
-	return PCI_SLOT(dev->devfn);
-}
-
-static int __init map_mpc1211_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
-	int irq = -1;
-
-	/* now lookup the actual IRQ on a platform specific basis (pci-'platform'.c) */
-	if (dev->bus->number == 0) {
-		switch (slot) {
-		case 13:   irq =  9; break;   /* USB */
-		case 22:   irq = 10; break;   /* LAN */
-		default:   irq =  0; break;
-	  	}
-	} else {
-		switch (pin) {
-		case 0:   irq =  0; break;
-		case 1:   irq =  7; break;
-		case 2:   irq =  9; break;
-		case 3:   irq = 10; break;
-		case 4:   irq = 11; break;
-		}
-	}
-
-	if( irq < 0 ) {
-		PCIDBG(3, "PCI: Error mapping IRQ on device %s\n", pci_name(dev));
-		return irq;
-	}
-	
-	PCIDBG(2, "Setting IRQ for slot %s to %d\n", pci_name(dev), irq);
-
-	return irq;
-}
-
-void __init pcibios_fixup_irqs(void)
-{
-	pci_fixup_irqs(mpc1211_swizzle, map_mpc1211_irq);
-}
-
-void pcibios_align_resource(void *data, struct resource *res,
-			    resource_size_t size, resource_size_t align)
-{
-	resource_size_t start = res->start;
-
-	if (res->flags & IORESOURCE_IO) {
-		if (start >= 0x10000UL) {
-			if ((start & 0xffffUL) < 0x4000UL) {
-				start = (start & 0xffff0000UL) + 0x4000UL;
-			} else if ((start & 0xffffUL) >= 0xf000UL) {
-				start = (start & 0xffff0000UL) + 0x10000UL;
-			}
-			res->start = start;
-		} else {
-			if (start & 0x300) {
-				start = (start + 0x3ff) & ~0x3ff;
-				res->start = start;
-			}
-		}
-	}
-}
-

arch/sh/boards/mpc1211/rtc.c

@@ -1,136 +0,0 @@
-/*
- * linux/arch/sh/kernel/rtc-mpc1211.c -- MPC-1211 on-chip RTC support
- *
- *  Copyright (C) 2002  Saito.K & Jeanne
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/bcd.h>
-#include <linux/mc146818rtc.h>
-
-unsigned long get_cmos_time(void)
-{
-	unsigned int year, mon, day, hour, min, sec;
-
-	spin_lock(&rtc_lock);
-
-	do {
-		sec = CMOS_READ(RTC_SECONDS);
-		min = CMOS_READ(RTC_MINUTES);
-		hour = CMOS_READ(RTC_HOURS);
-		day = CMOS_READ(RTC_DAY_OF_MONTH);
-		mon = CMOS_READ(RTC_MONTH);
-		year = CMOS_READ(RTC_YEAR);
-	} while (sec != CMOS_READ(RTC_SECONDS));
-
-	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
-	}
-
-	spin_unlock(&rtc_lock);
-
-	year += 1900;
-	if (year < 1970)
-		year += 100;
-
-	return mktime(year, mon, day, hour, min, sec);
-}
-
-void mpc1211_rtc_gettimeofday(struct timeval *tv)
-{
-
-	tv->tv_sec = get_cmos_time();
-	tv->tv_usec = 0;
-}
-
-/* arc/i386/kernel/time.c */
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- *      sets the minutes. Usually you'll only notice that after reboot!
- */
-static int set_rtc_mmss(unsigned long nowtime)
-{
-	int retval = 0;
-	int real_seconds, real_minutes, cmos_minutes;
-	unsigned char save_control, save_freq_select;
-
-	/* gets recalled with irq locally disabled */
-	spin_lock(&rtc_lock);
-	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
-	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
-	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-	cmos_minutes = CMOS_READ(RTC_MINUTES);
-	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		BCD_TO_BIN(cmos_minutes);
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
-		real_minutes += 30;		/* correct for half hour time zone */
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			BIN_TO_BCD(real_seconds);
-			BIN_TO_BCD(real_minutes);
-		}
-		CMOS_WRITE(real_seconds,RTC_SECONDS);
-		CMOS_WRITE(real_minutes,RTC_MINUTES);
-	} else {
-		printk(KERN_WARNING
-		       "set_rtc_mmss: can't update from %d to %d\n",
-		       cmos_minutes, real_minutes);
-		retval = -1;
-	}
-
-	/* The following flags have to be released exactly in this order,
-	 * otherwise the DS12887 (popular MC146818A clone with integrated
-	 * battery and quartz) will not reset the oscillator and will not
-	 * update precisely 500 ms later. You won't find this mentioned in
-	 * the Dallas Semiconductor data sheets, but who believes data
-	 * sheets anyway ...                           -- Markus Kuhn
-	 */
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-	spin_unlock(&rtc_lock);
-
-	return retval;
-}
-
-int mpc1211_rtc_settimeofday(const struct timeval *tv)
-{
-	unsigned long nowtime = tv->tv_sec;
-
-	return set_rtc_mmss(nowtime);
-}
-
-void mpc1211_time_init(void)
-{
-	rtc_sh_get_time = mpc1211_rtc_gettimeofday;
-	rtc_sh_set_time = mpc1211_rtc_settimeofday;
-}
-

arch/sh/boards/mpc1211/setup.c

@@ -1,347 +0,0 @@
-/*
- * linux/arch/sh/boards/mpc1211/setup.c
- *
- * Copyright (C) 2002  Saito.K & Jeanne,  Fujii.Y
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/mpc1211/mpc1211.h>
-#include <asm/mpc1211/pci.h>
-#include <asm/mpc1211/m1543c.h>
-
-/* ALI15X3 SMBus address offsets */
-#define SMBHSTSTS   (0 + 0x3100)
-#define SMBHSTCNT   (1 + 0x3100)
-#define SMBHSTSTART (2 + 0x3100)
-#define SMBHSTCMD   (7 + 0x3100)
-#define SMBHSTADD   (3 + 0x3100)
-#define SMBHSTDAT0  (4 + 0x3100)
-#define SMBHSTDAT1  (5 + 0x3100)
-#define SMBBLKDAT   (6 + 0x3100)
-
-/* Other settings */
-#define MAX_TIMEOUT 500		/* times 1/100 sec */
-
-/* ALI15X3 command constants */
-#define ALI15X3_ABORT      0x04
-#define ALI15X3_T_OUT      0x08
-#define ALI15X3_QUICK      0x00
-#define ALI15X3_BYTE       0x10
-#define ALI15X3_BYTE_DATA  0x20
-#define ALI15X3_WORD_DATA  0x30
-#define ALI15X3_BLOCK_DATA 0x40
-#define ALI15X3_BLOCK_CLR  0x80
-
-/* ALI15X3 status register bits */
-#define ALI15X3_STS_IDLE	0x04
-#define ALI15X3_STS_BUSY	0x08
-#define ALI15X3_STS_DONE	0x10
-#define ALI15X3_STS_DEV		0x20	/* device error */
-#define ALI15X3_STS_COLL	0x40	/* collision or no response */
-#define ALI15X3_STS_TERM	0x80	/* terminated by abort */
-#define ALI15X3_STS_ERR		0xE0	/* all the bad error bits */
-
-static void __init pci_write_config(unsigned long busNo,
-				    unsigned long devNo,
-				    unsigned long fncNo,
-				    unsigned long cnfAdd,
-				    unsigned long cnfData)
-{
-	ctrl_outl((0x80000000 
-                + ((busNo & 0xff) << 16) 
-                + ((devNo & 0x1f) << 11) 
-                + ((fncNo & 0x07) <<  8) 
-		+ (cnfAdd & 0xfc)), PCIPAR);
-
-        ctrl_outl(cnfData, PCIPDR);
-}
-
-/*
-  Initialize IRQ setting
-*/
-
-static unsigned char m_irq_mask = 0xfb;
-static unsigned char s_irq_mask = 0xff;
-
-static void disable_mpc1211_irq(unsigned int irq)
-{
-	if( irq < 8) {
-		m_irq_mask |= (1 << irq);
-		outb(m_irq_mask,I8259_M_MR);
-	} else {
-		s_irq_mask |= (1 << (irq - 8));
-		outb(s_irq_mask,I8259_S_MR);
-	}
-
-}
-
-static void enable_mpc1211_irq(unsigned int irq)
-{
-	if( irq < 8) {
-		m_irq_mask &= ~(1 << irq);
-		outb(m_irq_mask,I8259_M_MR);
-	} else {
-		s_irq_mask &= ~(1 << (irq - 8));
-		outb(s_irq_mask,I8259_S_MR);
-	}
-}
-
-static inline int mpc1211_irq_real(unsigned int irq)
-{
-	int value;
-	int irqmask;
-
-	if ( irq < 8) {
-		irqmask = 1<<irq;
-		outb(0x0b,I8259_M_CR);		/* ISR register */
-		value = inb(I8259_M_CR) & irqmask;
-		outb(0x0a,I8259_M_CR);		/* back ro the IPR reg */
-		return value;
-	}
-	irqmask = 1<<(irq - 8);
-	outb(0x0b,I8259_S_CR);		/* ISR register */
-	value = inb(I8259_S_CR) & irqmask;
-	outb(0x0a,I8259_S_CR);		/* back ro the IPR reg */
-	return value;
-}
-
-static void mask_and_ack_mpc1211(unsigned int irq)
-{
-	if(irq < 8) {
-		if(m_irq_mask & (1<<irq)){
-		  if(!mpc1211_irq_real(irq)){
-		    atomic_inc(&irq_err_count)
-		    printk("spurious 8259A interrupt: IRQ %x\n",irq);
-		   }
-		} else {
-			m_irq_mask |= (1<<irq);
-		}
-		inb(I8259_M_MR);		/* DUMMY */
-		outb(m_irq_mask,I8259_M_MR);	/* disable */
-		outb(0x60+irq,I8259_M_CR);	/* EOI */
-		
-	} else {
-		if(s_irq_mask & (1<<(irq - 8))){
-		  if(!mpc1211_irq_real(irq)){
-		    atomic_inc(&irq_err_count);
-		    printk("spurious 8259A interrupt: IRQ %x\n",irq);
-		  }
-		} else {
-			s_irq_mask |= (1<<(irq - 8));
-		}
-		inb(I8259_S_MR);		/* DUMMY */
-		outb(s_irq_mask,I8259_S_MR);	/* disable */
-		outb(0x60+(irq-8),I8259_S_CR); 	/* EOI */
-		outb(0x60+2,I8259_M_CR);
-	}
-}
-
-static void end_mpc1211_irq(unsigned int irq)
-{
-	enable_mpc1211_irq(irq);
-}
-
-static unsigned int startup_mpc1211_irq(unsigned int irq)
-{
-	enable_mpc1211_irq(irq);
-	return 0;
-}
-
-static void shutdown_mpc1211_irq(unsigned int irq)
-{
-	disable_mpc1211_irq(irq);
-}
-
-static struct hw_interrupt_type mpc1211_irq_type = {
-	.typename	= "MPC1211-IRQ",
-	.startup	= startup_mpc1211_irq,
-	.shutdown	= shutdown_mpc1211_irq,
-	.enable		= enable_mpc1211_irq,
-	.disable	= disable_mpc1211_irq,
-	.ack		= mask_and_ack_mpc1211,
-	.end		= end_mpc1211_irq
-};
-
-static void make_mpc1211_irq(unsigned int irq)
-{
-	irq_desc[irq].chip = &mpc1211_irq_type;
-	irq_desc[irq].status  = IRQ_DISABLED;
-	irq_desc[irq].action  = 0;
-	irq_desc[irq].depth   = 1;
-	disable_mpc1211_irq(irq);
-}
-
-int mpc1211_irq_demux(int irq)
-{
-	unsigned int poll;
-
-	if( irq == 2 ) {
-		outb(0x0c,I8259_M_CR);
-		poll = inb(I8259_M_CR);
-		if(poll & 0x80) {
-			irq = (poll & 0x07);
-		}
-		if( irq == 2) {
-			outb(0x0c,I8259_S_CR);
-			poll = inb(I8259_S_CR);
-			irq = (poll & 0x07) + 8;
-		}
-	}
-	return irq;
-}
-
-static void __init init_mpc1211_IRQ(void)
-{
-	int i;
-	/*
-	 * Super I/O (Just mimic PC):
-	 *  1: keyboard
-	 *  3: serial 1
-	 *  4: serial 0
-	 *  5: printer
-	 *  6: floppy
-	 *  8: rtc
-	 * 10: lan
-	 * 12: mouse
-	 * 14: ide0
-	 * 15: ide1
-	 */
-
-	pci_write_config(0,0,0,0x54, 0xb0b0002d);
-	outb(0x11, I8259_M_CR); 	/* mater icw1 edge trigger  */
-	outb(0x11, I8259_S_CR);		/* slave icw1 edge trigger  */
-	outb(0x20, I8259_M_MR); 	/* m icw2 base vec 0x08	    */
-	outb(0x28, I8259_S_MR);		/* s icw2 base vec 0x70	    */
-	outb(0x04, I8259_M_MR);		/* m icw3 slave irq2	    */
-	outb(0x02, I8259_S_MR);		/* s icw3 slave id	    */
-	outb(0x01, I8259_M_MR);		/* m icw4 non buf normal eoi*/
-	outb(0x01, I8259_S_MR);		/* s icw4 non buf normal eo1*/
-	outb(0xfb, I8259_M_MR);		/* disable irq0--irq7  */
-	outb(0xff, I8259_S_MR);		/* disable irq8--irq15 */
-
-	for ( i=0; i < 16; i++) {
-		if(i != 2) {
-			make_mpc1211_irq(i);
-		}
-	}
-}
-
-static void delay1000(void)
-{
-	int i;
-
-	for (i=0; i<1000; i++)
-		ctrl_delay();
-}
-
-static int put_smb_blk(unsigned char *p, int address, int command, int no)
-{
-	int temp;
-	int timeout;
-	int i;
-
-	outb(0xff, SMBHSTSTS);
-	temp = inb(SMBHSTSTS);
-	for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE); timeout++) {
-		delay1000();
-		temp = inb(SMBHSTSTS);
-	}
-	if (timeout >= MAX_TIMEOUT){
-		return -1;
-	}
-
-	outb(((address & 0x7f) << 1), SMBHSTADD);
-	outb(0xc0, SMBHSTCNT);
-	outb(command & 0xff, SMBHSTCMD);
-	outb(no & 0x1f, SMBHSTDAT0);
-
-	for(i = 1; i <= no; i++) {
-		outb(*p++, SMBBLKDAT);
-	}
-	outb(0xff, SMBHSTSTART);
-
-	temp = inb(SMBHSTSTS);
-	for (timeout = 0; (timeout < MAX_TIMEOUT) && !(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE)); timeout++) {
-		delay1000();
-		temp = inb(SMBHSTSTS);
-	}
-	if (timeout >= MAX_TIMEOUT) {
-		return -2;
-	}
-	if ( temp & ALI15X3_STS_ERR ){
-		return -3;
-	}
-	return 0;
-}
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= 0xa2000000,
-		.end	= 0xa2000000,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *mpc1211_devices[] __initdata = {
-	&heartbeat_device,
-};
-
-static int __init mpc1211_devices_setup(void)
-{
-	return platform_add_devices(mpc1211_devices,
-				    ARRAY_SIZE(mpc1211_devices));
-}
-__initcall(mpc1211_devices_setup);
-
-/* arch/sh/boards/mpc1211/rtc.c */
-void mpc1211_time_init(void);
-
-static void __init mpc1211_setup(char **cmdline_p)
-{
-	unsigned char spd_buf[128];
-
-	__set_io_port_base(PA_PCI_IO);
-
-	pci_write_config(0,0,0,0x54, 0xb0b00000);
-
-	do {
-		outb(ALI15X3_ABORT, SMBHSTCNT);
-		spd_buf[0] = 0x0c;
-		spd_buf[1] = 0x43;
-		spd_buf[2] = 0x7f;
-		spd_buf[3] = 0x03;
-		spd_buf[4] = 0x00;
-		spd_buf[5] = 0x03;
-		spd_buf[6] = 0x00;
-	} while (put_smb_blk(spd_buf, 0x69, 0, 7) < 0);
-
-	board_time_init = mpc1211_time_init;
-
-	return 0;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_mpc1211 __initmv = {
-	.mv_name		= "Interface MPC-1211(CTP/PCI/MPC-SH02)",
-	.mv_setup		= mpc1211_setup,
-	.mv_nr_irqs		= 48,
-	.mv_irq_demux		= mpc1211_irq_demux,
-	.mv_init_irq		= init_mpc1211_IRQ,
-};

arch/sh/boards/renesas/migor/setup.c

@@ -14,6 +14,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/nand.h>
 #include <linux/i2c.h>
+#include <linux/smc91x.h>
 #include <asm/machvec.h>
 #include <asm/io.h>
 #include <asm/sh_keysc.h>
@@ -27,6 +28,11 @@
  * 0x18000000       8GB    8   NAND Flash (K9K8G08U0A)
  */
 
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT,
+	.irq_flags = IRQF_TRIGGER_HIGH,
+};
+
 static struct resource smc91x_eth_resources[] = {
 	[0] = {
 		.name   = "SMC91C111" ,
@@ -36,7 +42,7 @@ static struct resource smc91x_eth_resources[] = {
 	},
 	[1] = {
 		.start  = 32, /* IRQ0 */
-		.flags  = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+		.flags  = IORESOURCE_IRQ,
 	},
 };
 
@@ -44,6 +50,9 @@ static struct platform_device smc91x_eth_device = {
 	.name           = "smc91x",
 	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
 	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 };
 
 static struct sh_keysc_info sh_keysc_info = {

arch/sh/boards/renesas/r7780rp/irq-r7780mp.c

@@ -62,7 +62,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = {
 static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors,
 			 NULL, mask_registers, NULL, NULL);
 
-unsigned char * __init highlander_init_irq_r7780mp(void)
+unsigned char * __init highlander_plat_irq_setup(void)
 {
 	if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) {
 		printk(KERN_INFO "Using r7780mp interrupt controller.\n");

arch/sh/boards/renesas/r7780rp/irq-r7780rp.c

@@ -55,7 +55,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = {
 static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors,
 			 NULL, mask_registers, NULL, NULL);
 
-unsigned char * __init highlander_init_irq_r7780rp(void)
+unsigned char * __init highlander_plat_irq_setup(void)
 {
 	if (ctrl_inw(0xa5000600)) {
 		printk(KERN_INFO "Using r7780rp interrupt controller.\n");

arch/sh/boards/renesas/r7780rp/irq-r7785rp.c

@@ -64,7 +64,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = {
 static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors,
 			 NULL, mask_registers, NULL, NULL);
 
-unsigned char * __init highlander_init_irq_r7785rp(void)
+unsigned char * __init highlander_plat_irq_setup(void)
 {
 	if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000)
 		return NULL;

arch/sh/boards/renesas/r7780rp/setup.c

@@ -316,7 +316,7 @@ static void __init highlander_setup(char **cmdline_p)
 
 static unsigned char irl2irq[HL_NR_IRL];
 
-int highlander_irq_demux(int irq)
+static int highlander_irq_demux(int irq)
 {
 	if (irq >= HL_NR_IRL || !irl2irq[irq])
 		return irq;
@@ -324,27 +324,9 @@ int highlander_irq_demux(int irq)
 	return irl2irq[irq];
 }
 
-void __init highlander_init_irq(void)
+static void __init highlander_init_irq(void)
 {
-	unsigned char *ucp = NULL;
-
-	do {
-#ifdef CONFIG_SH_R7780MP
-		ucp = highlander_init_irq_r7780mp();
-		if (ucp)
-			break;
-#endif
-#ifdef CONFIG_SH_R7785RP
-		ucp = highlander_init_irq_r7785rp();
-		if (ucp)
-			break;
-#endif
-#ifdef CONFIG_SH_R7780RP
-		ucp = highlander_init_irq_r7780rp();
-		if (ucp)
-			break;
-#endif
-	} while (0);
+	unsigned char *ucp = highlander_plat_irq_setup();
 
 	if (ucp) {
 		plat_irq_setup_pins(IRQ_MODE_IRL3210);

arch/sh/boards/renesas/rts7751r2d/setup.c

@@ -109,7 +109,6 @@ static struct platform_device heartbeat_device = {
 	.resource	= heartbeat_resources,
 };
 
-#ifdef CONFIG_MFD_SM501
 static struct plat_serial8250_port uart_platform_data[] = {
 	{
 		.membase	= (void __iomem *)0xb3e30000,
@@ -208,13 +207,9 @@ static struct platform_device sm501_device = {
 	.resource	= sm501_resources,
 };
 
-#endif /* CONFIG_MFD_SM501 */
-
 static struct platform_device *rts7751r2d_devices[] __initdata = {
-#ifdef CONFIG_MFD_SM501
 	&uart_device,
 	&sm501_device,
-#endif
 	&heartbeat_device,
 	&spi_sh_sci_device,
 };
@@ -234,7 +229,9 @@ static int __init rts7751r2d_devices_setup(void)
 {
 	if (register_trapped_io(&cf_trapped_io) == 0)
 		platform_device_register(&cf_ide_device);
+
 	spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus));
+
 	return platform_add_devices(rts7751r2d_devices,
 				    ARRAY_SIZE(rts7751r2d_devices));
 }

arch/sh/boards/se/7206/setup.c

@@ -3,12 +3,13 @@
  * linux/arch/sh/boards/se/7206/setup.c
  *
  * Copyright (C) 2006  Yoshinori Sato
- * Copyright (C) 2007  Paul Mundt
+ * Copyright (C) 2007 - 2008  Paul Mundt
  *
  * Hitachi 7206 SolutionEngine Support.
  */
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/smc91x.h>
 #include <asm/se7206.h>
 #include <asm/io.h>
 #include <asm/machvec.h>
@@ -16,8 +17,9 @@
 
 static struct resource smc91x_resources[] = {
 	[0] = {
-		.start		= 0x300,
-		.end		= 0x300 + 0x020 - 1,
+		.name		= "smc91x-regs",
+		.start		= PA_SMSC + 0x300,
+		.end		= PA_SMSC + 0x300 + 0x020 - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -27,9 +29,18 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
 };

arch/sh/boards/se/7722/setup.c

@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/input.h>
+#include <linux/smc91x.h>
 #include <asm/machvec.h>
 #include <asm/se7722.h>
 #include <asm/io.h>
@@ -44,6 +45,10 @@ static struct platform_device heartbeat_device = {
 };
 
 /* SMC91x */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT,
+};
+
 static struct resource smc91x_eth_resources[] = {
 	[0] = {
 		.name   = "smc91x-regs" ,
@@ -64,6 +69,7 @@ static struct platform_device smc91x_eth_device = {
 	.dev = {
 		.dma_mask               = NULL,         /* don't use dma */
 		.coherent_dma_mask      = 0xffffffff,
+		.platform_data	= &smc91x_info,
 	},
 	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
 	.resource       = smc91x_eth_resources,

arch/sh/boot/compressed/Makefile_32

@@ -6,7 +6,6 @@
 
 targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
 		   head_32.o misc_32.o piggy.o
-EXTRA_AFLAGS	:= -traditional
 
 OBJECTS = $(obj)/head_32.o $(obj)/misc_32.o
 

arch/sh/boot/compressed/Makefile_64

@@ -13,7 +13,6 @@
 
 targets		:= vmlinux vmlinux.bin vmlinux.bin.gz \
 		   head_64.o misc_64.o cache.o piggy.o
-EXTRA_AFLAGS	:= -traditional
 
 OBJECTS		:= $(obj)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o \
 		   $(obj)/cache.o

arch/sh/kernel/cpu/irq/intc-sh5.c

@@ -184,9 +184,8 @@ int intc_irq_describe(char* p, int irq)
 
 void __init plat_irq_setup(void)
 {
-        unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
+	unsigned long long __dummy0, __dummy1=~0x00000000100000f0;
 	unsigned long reg;
-	unsigned long data;
 	int i;
 
 	intc_virt = onchip_remap(INTC_BASE, 1024, "INTC");
@@ -196,11 +195,8 @@ void __init plat_irq_setup(void)
 
 
 	/* Set default: per-line enable/disable, priority driven ack/eoi */
-	for (i = 0; i < NR_INTC_IRQS; i++) {
-		if (platform_int_priority[i] != NO_PRIORITY) {
-			irq_desc[i].chip = &intc_irq_type;
-		}
-	}
+	for (i = 0; i < NR_INTC_IRQS; i++)
+		irq_desc[i].chip = &intc_irq_type;
 
 
 	/* Disable all interrupts and set all priorities to 0 to avoid trouble */
@@ -211,35 +207,42 @@ void __init plat_irq_setup(void)
 		ctrl_outl( NO_PRIORITY, reg);
 
 
-	/* Set IRLM */
-	/* If all the priorities are set to 'no priority', then
-	 * assume we are using encoded mode.
-	 */
-	irlm = platform_int_priority[IRQ_IRL0] + platform_int_priority[IRQ_IRL1] + \
-		platform_int_priority[IRQ_IRL2] + platform_int_priority[IRQ_IRL3];
-
-	if (irlm == NO_PRIORITY) {
-		/* IRLM = 0 */
-		reg = INTC_ICR_CLEAR;
-		i = IRQ_INTA;
-		printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
-	} else {
-		/* IRLM = 1 */
-		reg = INTC_ICR_SET;
-		i = IRQ_IRL0;
-	}
-	ctrl_outl(INTC_ICR_IRLM, reg);
-
-	/* Set interrupt priorities according to platform description */
-	for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
-		data |= platform_int_priority[i] << ((i % INTC_INTPRI_PPREG) * 4);
-		if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
-			/* Upon the 7th, set Priority Register */
-			ctrl_outl(data, reg);
-			data = 0;
-			reg += 8;
+#ifdef CONFIG_SH_CAYMAN
+	{
+		unsigned long data;
+
+		/* Set IRLM */
+		/* If all the priorities are set to 'no priority', then
+		 * assume we are using encoded mode.
+		 */
+		irlm = platform_int_priority[IRQ_IRL0] +
+		       platform_int_priority[IRQ_IRL1] +
+		       platform_int_priority[IRQ_IRL2] +
+		       platform_int_priority[IRQ_IRL3];
+		if (irlm == NO_PRIORITY) {
+			/* IRLM = 0 */
+			reg = INTC_ICR_CLEAR;
+			i = IRQ_INTA;
+			printk("Trying to use encoded IRL0-3. IRLs unsupported.\n");
+		} else {
+			/* IRLM = 1 */
+			reg = INTC_ICR_SET;
+			i = IRQ_IRL0;
 		}
-	}
+		ctrl_outl(INTC_ICR_IRLM, reg);
+
+		/* Set interrupt priorities according to platform description */
+		for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) {
+			data |= platform_int_priority[i] <<
+				((i % INTC_INTPRI_PPREG) * 4);
+			if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) {
+				/* Upon the 7th, set Priority Register */
+				ctrl_outl(data, reg);
+				data = 0;
+				reg += 8;
+			}
+		}
+#endif
 
 	/*
 	 * And now let interrupts come in.

arch/sh/kernel/cpu/irq/intc.c

@@ -1,7 +1,7 @@
 /*
  * Shared interrupt handling code for IPR and INTC2 types of IRQs.
  *
- * Copyright (C) 2007 Magnus Damm
+ * Copyright (C) 2007, 2008 Magnus Damm
  *
  * Based on intc2.c and ipr.c
  *
@@ -62,6 +62,9 @@ struct intc_desc_int {
 #endif
 
 static unsigned int intc_prio_level[NR_IRQS]; /* for now */
+#ifdef CONFIG_CPU_SH3
+static unsigned long ack_handle[NR_IRQS];
+#endif
 
 static inline struct intc_desc_int *get_intc_desc(unsigned int irq)
 {
@@ -98,17 +101,26 @@ static void write_32(unsigned long addr, unsigned long h, unsigned long data)
 
 static void modify_8(unsigned long addr, unsigned long h, unsigned long data)
 {
+	unsigned long flags;
+	local_irq_save(flags);
 	ctrl_outb(set_field(ctrl_inb(addr), data, h), addr);
+	local_irq_restore(flags);
 }
 
 static void modify_16(unsigned long addr, unsigned long h, unsigned long data)
 {
+	unsigned long flags;
+	local_irq_save(flags);
 	ctrl_outw(set_field(ctrl_inw(addr), data, h), addr);
+	local_irq_restore(flags);
 }
 
 static void modify_32(unsigned long addr, unsigned long h, unsigned long data)
 {
+	unsigned long flags;
+	local_irq_save(flags);
 	ctrl_outl(set_field(ctrl_inl(addr), data, h), addr);
+	local_irq_restore(flags);
 }
 
 enum {	REG_FN_ERR = 0, REG_FN_WRITE_BASE = 1, REG_FN_MODIFY_BASE = 5 };
@@ -219,6 +231,25 @@ static void intc_disable(unsigned int irq)
 	}
 }
 
+#ifdef CONFIG_CPU_SH3
+static void intc_mask_ack(unsigned int irq)
+{
+	struct intc_desc_int *d = get_intc_desc(irq);
+	unsigned long handle = ack_handle[irq];
+	unsigned long addr;
+
+	intc_disable(irq);
+
+	/* read register and write zero only to the assocaited bit */
+
+	if (handle) {
+		addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
+		ctrl_inb(addr);
+		ctrl_outb(0x3f ^ set_field(0, 1, handle), addr);
+	}
+}
+#endif
+
 static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp,
 					     unsigned int nr_hp,
 					     unsigned int irq)
@@ -280,7 +311,12 @@ static unsigned char intc_irq_sense_table[IRQ_TYPE_SENSE_MASK + 1] = {
 	[IRQ_TYPE_EDGE_FALLING] = VALID(0),
 	[IRQ_TYPE_EDGE_RISING] = VALID(1),
 	[IRQ_TYPE_LEVEL_LOW] = VALID(2),
+	/* SH7706, SH7707 and SH7709 do not support high level triggered */
+#if !defined(CONFIG_CPU_SUBTYPE_SH7706) && \
+    !defined(CONFIG_CPU_SUBTYPE_SH7707) && \
+    !defined(CONFIG_CPU_SUBTYPE_SH7709)
 	[IRQ_TYPE_LEVEL_HIGH] = VALID(3),
+#endif
 };
 
 static int intc_set_sense(unsigned int irq, unsigned int type)
@@ -430,6 +466,40 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc,
 	return 0;
 }
 
+#ifdef CONFIG_CPU_SH3
+static unsigned int __init intc_ack_data(struct intc_desc *desc,
+					  struct intc_desc_int *d,
+					  intc_enum enum_id)
+{
+	struct intc_mask_reg *mr = desc->ack_regs;
+	unsigned int i, j, fn, mode;
+	unsigned long reg_e, reg_d;
+
+	for (i = 0; mr && enum_id && i < desc->nr_ack_regs; i++) {
+		mr = desc->ack_regs + i;
+
+		for (j = 0; j < ARRAY_SIZE(mr->enum_ids); j++) {
+			if (mr->enum_ids[j] != enum_id)
+				continue;
+
+			fn = REG_FN_MODIFY_BASE;
+			mode = MODE_ENABLE_REG;
+			reg_e = mr->set_reg;
+			reg_d = mr->set_reg;
+
+			fn += (mr->reg_width >> 3) - 1;
+			return _INTC_MK(fn, mode,
+					intc_get_reg(d, reg_e),
+					intc_get_reg(d, reg_d),
+					1,
+					(mr->reg_width - 1) - j);
+		}
+	}
+
+	return 0;
+}
+#endif
+
 static unsigned int __init intc_sense_data(struct intc_desc *desc,
 					   struct intc_desc_int *d,
 					   intc_enum enum_id)
@@ -530,6 +600,11 @@ static void __init intc_register_irq(struct intc_desc *desc,
 
 	/* irq should be disabled by default */
 	d->chip.mask(irq);
+
+#ifdef CONFIG_CPU_SH3
+	if (desc->ack_regs)
+		ack_handle[irq] = intc_ack_data(desc, d, enum_id);
+#endif
 }
 
 static unsigned int __init save_reg(struct intc_desc_int *d,
@@ -560,6 +635,9 @@ void __init register_intc_controller(struct intc_desc *desc)
 	d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0;
 	d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0;
 
+#ifdef CONFIG_CPU_SH3
+	d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0;
+#endif
 	d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg));
 #ifdef CONFIG_SMP
 	d->smp = alloc_bootmem(d->nr_reg * sizeof(*d->smp));
@@ -592,14 +670,23 @@ void __init register_intc_controller(struct intc_desc *desc)
 		}
 	}
 
-	BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
-
 	d->chip.name = desc->name;
 	d->chip.mask = intc_disable;
 	d->chip.unmask = intc_enable;
 	d->chip.mask_ack = intc_disable;
 	d->chip.set_type = intc_set_sense;
 
+#ifdef CONFIG_CPU_SH3
+	if (desc->ack_regs) {
+		for (i = 0; i < desc->nr_ack_regs; i++)
+			k += save_reg(d, k, desc->ack_regs[i].set_reg, 0);
+
+		d->chip.mask_ack = intc_mask_ack;
+	}
+#endif
+
+	BUG_ON(k > 256); /* _INTC_ADDR_E() and _INTC_ADDR_D() are 8 bits */
+
 	for (i = 0; i < desc->nr_vectors; i++) {
 		struct intc_vect *vect = desc->vectors + i;
 

arch/sh/kernel/cpu/sh2a/fpu.c

@@ -300,7 +300,7 @@ static int denormal_addf(int hx, int hy)
 		iy = hy & 0x7fffffff;
 		if (iy < 0x00800000) {
 			ix = denormal_subf1(ix, iy);
-			if (ix < 0) {
+			if ((int) ix < 0) {
 				ix = -ix;
 				sign ^= 0x80000000;
 			}
@@ -385,7 +385,7 @@ static long long denormal_addd(long long hx, long long hy)
 		iy = hy & 0x7fffffffffffffffLL;
 		if (iy < 0x0010000000000000LL) {
 			ix = denormal_subd1(ix, iy);
-			if (ix < 0) {
+			if ((int) ix < 0) {
 				ix = -ix;
 				sign ^= 0x8000000000000000LL;
 			}

arch/sh/kernel/cpu/sh3/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the Linux/SuperH SH-3 backends.
 #
 
-obj-y	:= ex.o probe.o entry.o
+obj-y	:= ex.o probe.o entry.o setup-sh3.o
 
 # CPU subtype setup
 obj-$(CONFIG_CPU_SUBTYPE_SH7705)	+= setup-sh7705.o

arch/sh/kernel/cpu/sh3/setup-sh3.c

@@ -0,0 +1,71 @@
+/*
+ * Shared SH3 Setup code
+ *
+ *  Copyright (C) 2008  Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+/* All SH3 devices are equipped with IRQ0->5 (except sh7708) */
+
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5,
+};
+
+static struct intc_vect vectors_irq0123[] __initdata = {
+	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+};
+
+static struct intc_vect vectors_irq45[] __initdata = {
+	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
+	{ 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4000004, 0, 8, /* IRR0 */
+	  { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xa4000010, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh3-irq0123",
+			     vectors_irq0123, NULL, NULL,
+			     prio_registers, sense_registers, ack_registers);
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq45, "sh3-irq45",
+			     vectors_irq45, NULL, NULL,
+			     prio_registers, sense_registers, ack_registers);
+
+#define INTC_ICR1		0xa4000010UL
+#define INTC_ICR1_IRQLVL	(1<<14)
+
+void __init plat_irq_setup_pins(int mode)
+{
+	if (mode == IRQ_MODE_IRQ) {
+		ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
+		register_intc_controller(&intc_desc_irq0123);
+		return;
+	}
+	BUG();
+}
+
+void __init plat_irq_setup_sh3(void)
+{
+	register_intc_controller(&intc_desc_irq45);
+}

arch/sh/kernel/cpu/sh3/setup-sh7705.c

@@ -37,7 +37,7 @@ enum {
 };
 
 static struct intc_vect vectors[] __initdata = {
-	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+	/* IRQ0->5 are handled in setup-sh3.c */
 	INTC_VECT(PINT07, 0x700), INTC_VECT(PINT815, 0x720),
 	INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
 	INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
@@ -48,7 +48,7 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(ADC_ADI, 0x980),
 	INTC_VECT(USB_USI0, 0xa20), INTC_VECT(USB_USI1, 0xa40),
 	INTC_VECT(TPU0, 0xc00), INTC_VECT(TPU1, 0xc20),
-	INTC_VECT(TPU3, 0xc80), INTC_VECT(TPU1, 0xca0),
+	INTC_VECT(TPU2, 0xc80), INTC_VECT(TPU3, 0xca0),
 	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
 	INTC_VECT(TMU2_TUNI, 0x440), INTC_VECT(TMU2_TICPI, 0x460),
 	INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0),
@@ -81,14 +81,6 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, groups,
 			 NULL, prio_registers, NULL);
 
-static struct intc_vect vectors_irq[] __initdata = {
-	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
-	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irq, "sh7705-irq", vectors_irq, NULL,
-			 NULL, prio_registers, NULL);
-
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xa4410000,
@@ -159,16 +151,8 @@ static int __init sh7705_devices_setup(void)
 }
 __initcall(sh7705_devices_setup);
 
-void __init plat_irq_setup_pins(int mode)
-{
-	if (mode == IRQ_MODE_IRQ) {
-		register_intc_controller(&intc_desc_irq);
-		return;
-	}
-	BUG();
-}
-
 void __init plat_irq_setup(void)
 {
 	register_intc_controller(&intc_desc);
+	plat_irq_setup_sh3();
 }

arch/sh/kernel/cpu/sh3/setup-sh770x.c

@@ -52,7 +52,7 @@ static struct intc_vect vectors[] __initdata = {
 #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
     defined(CONFIG_CPU_SUBTYPE_SH7707) || \
     defined(CONFIG_CPU_SUBTYPE_SH7709)
-	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+	/* IRQ0->5 are handled in setup-sh3.c */
 	INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
 	INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
 	INTC_VECT(ADC_ADI, 0x980),
@@ -104,18 +104,6 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, groups,
 			 NULL, prio_registers, NULL);
 
-#if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7707) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7709)
-static struct intc_vect vectors_irq[] __initdata = {
-	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
-	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irq, "sh770x-irq", vectors_irq, NULL,
-			 NULL, prio_registers, NULL);
-#endif
-
 static struct resource rtc_resources[] = {
 	[0] =	{
 		.start	= 0xfffffec0,
@@ -194,24 +182,12 @@ static int __init sh770x_devices_setup(void)
 }
 __initcall(sh770x_devices_setup);
 
-#define INTC_ICR1		0xa4000010UL
-#define INTC_ICR1_IRQLVL	(1<<14)
-
-void __init plat_irq_setup_pins(int mode)
+void __init plat_irq_setup(void)
 {
-	if (mode == IRQ_MODE_IRQ) {
+	register_intc_controller(&intc_desc);
 #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \
     defined(CONFIG_CPU_SUBTYPE_SH7707) || \
     defined(CONFIG_CPU_SUBTYPE_SH7709)
-		ctrl_outw(ctrl_inw(INTC_ICR1) & ~INTC_ICR1_IRQLVL, INTC_ICR1);
-		register_intc_controller(&intc_desc_irq);
-		return;
+	plat_irq_setup_sh3();
 #endif
-	}
-	BUG();
-}
-
-void __init plat_irq_setup(void)
-{
-	register_intc_controller(&intc_desc);
 }

arch/sh/kernel/cpu/sh3/setup-sh7710.c

@@ -38,7 +38,7 @@ enum {
 };
 
 static struct intc_vect vectors[] __initdata = {
-	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+	/* IRQ0->5 are handled in setup-sh3.c */
 	INTC_VECT(DMAC_DEI0, 0x800), INTC_VECT(DMAC_DEI1, 0x820),
 	INTC_VECT(DMAC_DEI2, 0x840), INTC_VECT(DMAC_DEI3, 0x860),
 	INTC_VECT(SCIF0_ERI, 0x880), INTC_VECT(SCIF0_RXI, 0x8a0),
@@ -79,10 +79,7 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 	{ 0xa4000016, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
 	{ 0xa4000018, 0, 16, 4, /* IPRD */ { 0, 0, IRQ5, IRQ4 } },
 	{ 0xa400001a, 0, 16, 4, /* IPRE */ { DMAC1, SCIF0, SCIF1 } },
-	{ 0xa4080000, 0, 16, 4, /* IPRF */ { 0, DMAC2 } },
-#ifdef CONFIG_CPU_SUBTYPE_SH7710
-	{ 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC } },
-#endif
+	{ 0xa4080000, 0, 16, 4, /* IPRF */ { IPSEC, DMAC2 } },
 	{ 0xa4080002, 0, 16, 4, /* IPRG */ { EDMAC0, EDMAC1, EDMAC2 } },
 	{ 0xa4080004, 0, 16, 4, /* IPRH */ { 0, 0, 0, SIOF0 } },
 	{ 0xa4080006, 0, 16, 4, /* IPRI */ { 0, 0, SIOF1 } },
@@ -91,14 +88,6 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, groups,
 			 NULL, prio_registers, NULL);
 
-static struct intc_vect vectors_irq[] __initdata = {
-	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
-	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
-};
-
-static DECLARE_INTC_DESC(intc_desc_irq, "sh7710-irq", vectors_irq, NULL,
-			 NULL, prio_registers, NULL);
-
 static struct resource rtc_resources[] = {
 	[0] =	{
 		.start	= 0xa413fec0,
@@ -170,16 +159,8 @@ static int __init sh7710_devices_setup(void)
 }
 __initcall(sh7710_devices_setup);
 
-void __init plat_irq_setup_pins(int mode)
-{
-	if (mode == IRQ_MODE_IRQ) {
-		register_intc_controller(&intc_desc_irq);
-		return;
-	}
-	BUG();
-}
-
 void __init plat_irq_setup(void)
 {
 	register_intc_controller(&intc_desc);
+	plat_irq_setup_sh3();
 }

arch/sh/kernel/cpu/sh3/setup-sh7720.c

@@ -19,10 +19,6 @@
 #include <linux/serial_sci.h>
 #include <asm/rtc.h>
 
-#define INTC_ICR1	0xA4140010UL
-#define INTC_ICR_IRLM   0x4000
-#define INTC_ICR_IRQ	(~INTC_ICR_IRLM)
-
 static struct resource rtc_resources[] = {
 	[0] = {
 		.start	= 0xa413fec0,
@@ -170,6 +166,7 @@ enum {
 };
 
 static struct intc_vect vectors[] __initdata = {
+	/* IRQ0->5 are handled in setup-sh3.c */
 	INTC_VECT(TMU0, 0x400),       INTC_VECT(TMU1, 0x420),
 	INTC_VECT(TMU2, 0x440),       INTC_VECT(RTC_ATI, 0x480),
 	INTC_VECT(RTC_PRI, 0x4a0),    INTC_VECT(RTC_CUI, 0x4c0),
@@ -214,11 +211,7 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 	{ 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } },
 	{ 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } },
 	{ 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } },
-#if defined(CONFIG_CPU_SUBTYPE_SH7720)
 	{ 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } },
-#else
-	{ 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, 0 } },
-#endif
 	{ 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } },
 	{ 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } },
 	{ 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } },
@@ -229,32 +222,8 @@ static struct intc_prio_reg prio_registers[] __initdata = {
 static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups,
 		NULL, prio_registers, NULL);
 
-static struct intc_sense_reg sense_registers[] __initdata = {
-	{ INTC_ICR1, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } },
-};
-
-static struct intc_vect vectors_irq[] __initdata = {
-	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
-	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
-	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
-};
-
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7720-irq", vectors_irq,
-		NULL, NULL, prio_registers, sense_registers);
-
-void __init plat_irq_setup_pins(int mode)
-{
-	switch (mode) {
-	case IRQ_MODE_IRQ:
-		ctrl_outw(ctrl_inw(INTC_ICR1) & INTC_ICR_IRQ, INTC_ICR1);
-		register_intc_controller(&intc_irq_desc);
-		break;
-	default:
-		BUG();
-	}
-}
-
 void __init plat_irq_setup(void)
 {
 	register_intc_controller(&intc_desc);
+	plat_irq_setup_sh3();
 }

arch/sh/kernel/cpu/sh5/entry.S

@@ -143,12 +143,22 @@ resvec_save_area:
 trap_jtable:
 	.long	do_exception_error		/* 0x000 */
 	.long	do_exception_error		/* 0x020 */
+#ifdef CONFIG_MMU
 	.long	tlb_miss_load				/* 0x040 */
 	.long	tlb_miss_store				/* 0x060 */
+#else
+	.long	do_exception_error
+	.long	do_exception_error
+#endif
 	! ARTIFICIAL pseudo-EXPEVT setting
 	.long	do_debug_interrupt		/* 0x080 */
+#ifdef CONFIG_MMU
 	.long	tlb_miss_load				/* 0x0A0 */
 	.long	tlb_miss_store				/* 0x0C0 */
+#else
+	.long	do_exception_error
+	.long	do_exception_error
+#endif
 	.long	do_address_error_load	/* 0x0E0 */
 	.long	do_address_error_store	/* 0x100 */
 #ifdef CONFIG_SH_FPU
@@ -185,10 +195,18 @@ trap_jtable:
 	.endr
 	.long	do_IRQ			/* 0xA00 */
 	.long	do_IRQ			/* 0xA20 */
+#ifdef CONFIG_MMU
 	.long	itlb_miss_or_IRQ			/* 0xA40 */
+#else
+	.long	do_IRQ
+#endif
 	.long	do_IRQ			/* 0xA60 */
 	.long	do_IRQ			/* 0xA80 */
+#ifdef CONFIG_MMU
 	.long	itlb_miss_or_IRQ			/* 0xAA0 */
+#else
+	.long	do_IRQ
+#endif
 	.long	do_exception_error		/* 0xAC0 */
 	.long	do_address_error_exec	/* 0xAE0 */
 	.rept 8
@@ -274,6 +292,7 @@ not_a_tlb_miss:
 	 * Instead of '.space 1024-TEXT_SIZE' place the RESVEC
 	 * block making sure the final alignment is correct.
 	 */
+#ifdef CONFIG_MMU
 tlb_miss:
 	synco	/* TAKum03020 (but probably a good idea anyway.) */
 	putcon	SP, KCR1
@@ -377,6 +396,9 @@ fixup_to_invoke_general_handler:
 	getcon	KCR1, SP
 	pta	handle_exception, tr0
 	blink	tr0, ZERO
+#else /* CONFIG_MMU */
+	.balign 256
+#endif
 
 /* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE
    DOES END UP AT VBR+0x600 */
@@ -1103,6 +1125,7 @@ restore_all:
  * fpu_error_or_IRQ? is a helper to deflect to the right cause.
  *
  */
+#ifdef CONFIG_MMU
 tlb_miss_load:
 	or	SP, ZERO, r2
 	or	ZERO, ZERO, r3		/* Read */
@@ -1132,6 +1155,7 @@ call_do_page_fault:
 	movi	do_page_fault, r6
         ptabs	r6, tr0
         blink	tr0, ZERO
+#endif /* CONFIG_MMU */
 
 fpu_error_or_IRQA:
 	pta	its_IRQ, tr0
@@ -1481,6 +1505,7 @@ poke_real_address_q:
 	ptabs	LINK, tr0
 	blink	tr0, r63
 
+#ifdef CONFIG_MMU
 /*
  * --- User Access Handling Section
  */
@@ -1604,6 +1629,7 @@ ___clear_user_exit:
 	ptabs	LINK, tr0
 	blink	tr0, ZERO
 
+#endif /* CONFIG_MMU */
 
 /*
  * int __strncpy_from_user(unsigned long __dest, unsigned long __src,
@@ -2014,9 +2040,11 @@ sa_default_restorer:
 	.global asm_uaccess_start	/* Just a marker */
 asm_uaccess_start:
 
+#ifdef CONFIG_MMU
 	.long	___copy_user1, ___copy_user_exit
 	.long	___copy_user2, ___copy_user_exit
 	.long	___clear_user1, ___clear_user_exit
+#endif
 	.long	___strncpy_from_user1, ___strncpy_from_user_exit
 	.long	___strnlen_user1, ___strnlen_user_exit
 	.long	___get_user_asm_b1, ___get_user_asm_b_exit

arch/sh/kernel/cpu/sh5/probe.c

@@ -15,6 +15,7 @@
 #include <linux/string.h>
 #include <asm/processor.h>
 #include <asm/cache.h>
+#include <asm/tlb.h>
 
 int __init detect_cpu_and_cache_system(void)
 {
@@ -67,5 +68,8 @@ int __init detect_cpu_and_cache_system(void)
 	set_bit(SH_CACHE_MODE_WB, &(boot_cpu_data.dcache.flags));
 #endif
 
+	/* Setup some I/D TLB defaults */
+	sh64_tlb_init();
+
 	return 0;
 }

arch/sh/kernel/early_printk.c

@@ -141,7 +141,9 @@ static void scif_sercon_init(char *s)
  */
 static void scif_sercon_init(char *s)
 {
+	struct uart_port *port = &scif_port;
 	unsigned baud = DEFAULT_BAUD;
+	unsigned int status;
 	char *e;
 
 	if (*s == ',')
@@ -160,19 +162,25 @@ static void scif_sercon_init(char *s)
 			baud = DEFAULT_BAUD;
 	}
 
-	ctrl_outw(0, scif_port.mapbase + 8);
-	ctrl_outw(0, scif_port.mapbase);
+	do {
+		status = sci_in(port, SCxSR);
+	} while (!(status & SCxSR_TEND(port)));
+
+	sci_out(port, SCSCR, 0);	 /* TE=0, RE=0 */
+	sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+	sci_out(port, SCSMR, 0);
 
 	/* Set baud rate */
-	ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) /
-		  (32 * baud) - 1, scif_port.mapbase + 4);
-
-	ctrl_outw(12, scif_port.mapbase + 24);
-	ctrl_outw(8, scif_port.mapbase + 24);
-	ctrl_outw(0, scif_port.mapbase + 32);
-	ctrl_outw(0x60, scif_port.mapbase + 16);
-	ctrl_outw(0, scif_port.mapbase + 36);
-	ctrl_outw(0x30, scif_port.mapbase + 8);
+	sci_out(port, SCBRR, (CONFIG_SH_PCLK_FREQ + 16 * baud) /
+		(32 * baud) - 1);
+	udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
+
+	sci_out(port, SCSPTR, 0);
+	sci_out(port, SCxSR, 0x60);
+	sci_out(port, SCLSR, 0);
+
+	sci_out(port, SCFCR, 0);
+	sci_out(port, SCSCR, 0x30);	 /* TE=1, RE=1 */
 }
 #endif /* defined(CONFIG_CPU_SUBTYPE_SH7720) */
 #endif /* !defined(CONFIG_SH_STANDARD_BIOS) */

arch/sh/kernel/setup.c

@@ -53,6 +53,7 @@ EXPORT_SYMBOL(cpu_data);
  * sh_mv= on the command line, prior to .machvec.init teardown.
  */
 struct sh_machine_vector sh_mv = { .mv_name = "generic", };
+EXPORT_SYMBOL(sh_mv);
 
 #ifdef CONFIG_VT
 struct screen_info screen_info;
@@ -76,11 +77,18 @@ static struct resource data_resource = {
 	.flags = IORESOURCE_BUSY | IORESOURCE_MEM,
 };
 
+static struct resource bss_resource = {
+	.name	= "Kernel bss",
+	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM,
+};
+
 unsigned long memory_start;
 EXPORT_SYMBOL(memory_start);
 unsigned long memory_end = 0;
 EXPORT_SYMBOL(memory_end);
 
+static struct resource mem_resources[MAX_NUMNODES];
+
 int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
 
 static int __init early_parse_mem(char *p)
@@ -169,6 +177,40 @@ static inline void __init reserve_crashkernel(void)
 {}
 #endif
 
+void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
+						unsigned long end_pfn)
+{
+	struct resource *res = &mem_resources[nid];
+
+	WARN_ON(res->name); /* max one active range per node for now */
+
+	res->name = "System RAM";
+	res->start = start_pfn << PAGE_SHIFT;
+	res->end = (end_pfn << PAGE_SHIFT) - 1;
+	res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	if (request_resource(&iomem_resource, res)) {
+		pr_err("unable to request memory_resource 0x%lx 0x%lx\n",
+		       start_pfn, end_pfn);
+		return;
+	}
+
+	/*
+	 *  We don't know which RAM region contains kernel data,
+	 *  so we try it repeatedly and let the resource manager
+	 *  test it.
+	 */
+	request_resource(res, &code_resource);
+	request_resource(res, &data_resource);
+	request_resource(res, &bss_resource);
+
+#ifdef CONFIG_KEXEC
+	if (crashk_res.start != crashk_res.end)
+		request_resource(res, &crashk_res);
+#endif
+
+	add_active_range(nid, start_pfn, end_pfn);
+}
+
 void __init setup_bootmem_allocator(unsigned long free_pfn)
 {
 	unsigned long bootmap_size;
@@ -181,7 +223,7 @@ void __init setup_bootmem_allocator(unsigned long free_pfn)
 	bootmap_size = init_bootmem_node(NODE_DATA(0), free_pfn,
 					 min_low_pfn, max_low_pfn);
 
-	add_active_range(0, min_low_pfn, max_low_pfn);
+	__add_active_range(0, min_low_pfn, max_low_pfn);
 	register_bootmem_low_pages();
 
 	node_set_online(0);
@@ -267,6 +309,8 @@ void __init setup_arch(char **cmdline_p)
 	code_resource.end = virt_to_phys(_etext)-1;
 	data_resource.start = virt_to_phys(_etext);
 	data_resource.end = virt_to_phys(_edata)-1;
+	bss_resource.start = virt_to_phys(__bss_start);
+	bss_resource.end = virt_to_phys(_ebss)-1;
 
 	memory_start = (unsigned long)__va(__MEMORY_START);
 	if (!memory_end)

arch/sh/kernel/sh_ksyms_32.c

@@ -20,8 +20,6 @@
 extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
 extern struct hw_interrupt_type no_irq_type;
 
-EXPORT_SYMBOL(sh_mv);
-
 /* platform dependent support */
 EXPORT_SYMBOL(dump_fpu);
 EXPORT_SYMBOL(kernel_thread);

arch/sh/kernel/sh_ksyms_64.c

@@ -16,6 +16,7 @@
 #include <linux/in6.h>
 #include <linux/interrupt.h>
 #include <linux/screen_info.h>
+#include <asm/cacheflush.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
 #include <asm/checksum.h>
@@ -29,25 +30,50 @@ extern int dump_fpu(struct pt_regs *, elf_fpregset_t *);
 EXPORT_SYMBOL(dump_fpu);
 EXPORT_SYMBOL(kernel_thread);
 
+#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU)
+EXPORT_SYMBOL(clear_user_page);
+#endif
+
+#ifndef CONFIG_CACHE_OFF
+EXPORT_SYMBOL(flush_dcache_page);
+#endif
+
 /* Networking helper routines. */
+EXPORT_SYMBOL(csum_partial);
 EXPORT_SYMBOL(csum_partial_copy_nocheck);
+#ifdef CONFIG_IPV6
+EXPORT_SYMBOL(csum_ipv6_magic);
+#endif
 
 #ifdef CONFIG_VT
 EXPORT_SYMBOL(screen_info);
 #endif
 
+EXPORT_SYMBOL(__put_user_asm_b);
+EXPORT_SYMBOL(__put_user_asm_w);
 EXPORT_SYMBOL(__put_user_asm_l);
+EXPORT_SYMBOL(__put_user_asm_q);
+EXPORT_SYMBOL(__get_user_asm_b);
+EXPORT_SYMBOL(__get_user_asm_w);
 EXPORT_SYMBOL(__get_user_asm_l);
+EXPORT_SYMBOL(__get_user_asm_q);
+EXPORT_SYMBOL(__strnlen_user);
+EXPORT_SYMBOL(__strncpy_from_user);
+EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(__copy_user);
 EXPORT_SYMBOL(empty_zero_page);
 EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(__udelay);
 EXPORT_SYMBOL(__ndelay);
+EXPORT_SYMBOL(__const_udelay);
 
 /* Ugh.  These come in from libgcc.a at link time. */
 #define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name)
 
 DECLARE_EXPORT(__sdivsi3);
+DECLARE_EXPORT(__sdivsi3_2);
 DECLARE_EXPORT(__muldi3);
 DECLARE_EXPORT(__udivsi3);
+DECLARE_EXPORT(__div_table);

arch/sh/kernel/time_64.c

@@ -172,6 +172,7 @@ void do_gettimeofday(struct timeval *tv)
 	tv->tv_sec = sec;
 	tv->tv_usec = usec;
 }
+EXPORT_SYMBOL(do_gettimeofday);
 
 int do_settimeofday(struct timespec *tv)
 {
@@ -240,7 +241,7 @@ static inline void do_timer_interrupt(void)
 	 * the irq version of write_lock because as just said we have irq
 	 * locally disabled. -arca
 	 */
-	write_lock(&xtime_lock);
+	write_seqlock(&xtime_lock);
 	asm ("getcon cr62, %0" : "=r" (current_ctc));
 	ctc_last_interrupt = (unsigned long) current_ctc;
 
@@ -266,7 +267,7 @@ static inline void do_timer_interrupt(void)
 			/* do it again in 60 s */
 			last_rtc_update = xtime.tv_sec - 600;
 	}
-	write_unlock(&xtime_lock);
+	write_sequnlock(&xtime_lock);
 
 #ifndef CONFIG_SMP
 	update_process_times(user_mode(get_irq_regs()));

arch/sh/lib64/dbg.c

@@ -186,8 +186,8 @@ void evt_debug(int evt, int ret_addr, int event, int tra, struct pt_regs *regs)
 	rr->pc = regs->pc;
 
 	if (sp < stack_bottom + 3092) {
-		printk("evt_debug : stack underflow report\n");
 		int i, j;
+		printk("evt_debug : stack underflow report\n");
 		for (j=0, i = event_ptr; j<16; j++) {
 			rr = event_ring + i;
 			printk("evt=%08x event=%08x tra=%08x pid=%5d sp=%08lx pc=%08lx\n",

arch/sh/mm/Makefile_64

@@ -2,10 +2,11 @@
 # Makefile for the Linux SuperH-specific parts of the memory manager.
 #
 
-obj-y			:= init.o extable_64.o consistent.o
+obj-y			:= init.o consistent.o
 
-mmu-y			:= tlb-nommu.o pg-nommu.o
-mmu-$(CONFIG_MMU)	:= fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o
+mmu-y			:= tlb-nommu.o pg-nommu.o extable_32.o
+mmu-$(CONFIG_MMU)	:= fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o \
+			   extable_64.o
 
 ifndef CONFIG_CACHE_OFF
 obj-y			+= cache-sh5.o

arch/sh/mm/cache-sh5.c

@@ -714,6 +714,7 @@ void flush_cache_sigtramp(unsigned long vaddr)
 	sh64_icache_inv_current_user_range(vaddr, end);
 }
 
+#ifdef CONFIG_MMU
 /*
  * These *MUST* lie in an area of virtual address space that's otherwise
  * unused.
@@ -830,3 +831,4 @@ void clear_user_page(void *to, unsigned long address, struct page *page)
 	else
 		sh64_clear_user_page_coloured(to, address);
 }
+#endif

arch/sh/mm/ioremap_64.c

@@ -343,6 +343,7 @@ unsigned long onchip_remap(unsigned long phys, unsigned long size, const char *n
 
 	return shmedia_alloc_io(phys, size, name);
 }
+EXPORT_SYMBOL(onchip_remap);
 
 void onchip_unmap(unsigned long vaddr)
 {
@@ -370,6 +371,7 @@ void onchip_unmap(unsigned long vaddr)
 		kfree(res);
 	}
 }
+EXPORT_SYMBOL(onchip_unmap);
 
 #ifdef CONFIG_PROC_FS
 static int

arch/sh/mm/numa.c

@@ -59,7 +59,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 	free_pfn = start_pfn = start >> PAGE_SHIFT;
 	end_pfn = end >> PAGE_SHIFT;
 
-	add_active_range(nid, start_pfn, end_pfn);
+	__add_active_range(nid, start_pfn, end_pfn);
 
 	/* Node-local pgdat */
 	NODE_DATA(nid) = pfn_to_kaddr(free_pfn);

arch/sh/tools/mach-types

@@ -28,7 +28,6 @@ HD64465			HD64465
 7751SYSTEMH		SH_7751_SYSTEMH
 HP6XX			SH_HP6XX
 DREAMCAST		SH_DREAMCAST
-MPC1211			SH_MPC1211
 SNAPGEAR		SH_SECUREEDGE5410
 EDOSK7705		SH_EDOSK7705
 SH4202_MICRODEV		SH_SH4202_MICRODEV

drivers/input/serio/i8042-io.h

@@ -25,7 +25,7 @@
 #elif defined(__arm__)
 /* defined in include/asm-arm/arch-xxx/irqs.h */
 #include <asm/irq.h>
-#elif defined(CONFIG_SUPERH64)
+#elif defined(CONFIG_SH_CAYMAN)
 #include <asm/irq.h>
 #else
 # define I8042_KBD_IRQ	1

drivers/mtd/maps/Kconfig

@@ -374,7 +374,7 @@ config MTD_REDWOOD
 
 config MTD_SOLUTIONENGINE
 	tristate "CFI Flash device mapped on Hitachi SolutionEngine"
-	depends on SUPERH && MTD_CFI && MTD_REDBOOT_PARTS
+	depends on SUPERH && SOLUTION_ENGINE && MTD_CFI && MTD_REDBOOT_PARTS
 	help
 	  This enables access to the flash chips on the Hitachi SolutionEngine and
 	  similar boards. Say 'Y' if you are building a kernel for such a board.
@@ -480,13 +480,6 @@ config MTD_H720X
 	  This enables access to the flash chips on the Hynix evaluation boards.
 	  If you have such a board, say 'Y'.
 
-config MTD_MPC1211
-	tristate "CFI Flash device mapped on Interface MPC-1211"
-	depends on SH_MPC1211 && MTD_CFI
-	help
-	  This enables access to the flash chips on the Interface MPC-1211(CTP/PCI/MPC-SH02).
-	  If you have such a board, say 'Y'.
-
 config MTD_OMAP_NOR
 	tristate "TI OMAP board mappings"
 	depends on MTD_CFI && ARCH_OMAP

drivers/mtd/maps/Makefile

@@ -58,7 +58,6 @@ obj-$(CONFIG_MTD_WALNUT)        += walnut.o
 obj-$(CONFIG_MTD_H720X)		+= h720x-flash.o
 obj-$(CONFIG_MTD_SBC8240)	+= sbc8240.o
 obj-$(CONFIG_MTD_NOR_TOTO)	+= omap-toto-flash.o
-obj-$(CONFIG_MTD_MPC1211)	+= mpc1211.o
 obj-$(CONFIG_MTD_IXP4XX)	+= ixp4xx.o
 obj-$(CONFIG_MTD_IXP2000)	+= ixp2000.o
 obj-$(CONFIG_MTD_WRSBC8260)	+= wr_sbc82xx_flash.o

drivers/mtd/maps/mpc1211.c

@@ -1,80 +0,0 @@
-/*
- * Flash on MPC-1211
- *
- * $Id: mpc1211.c,v 1.4 2004/09/16 23:27:13 gleixner Exp $
- *
- * (C) 2002 Interface, Saito.K & Jeanne
- *
- * GPL'd
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-static struct mtd_info *flash_mtd;
-static struct mtd_partition *parsed_parts;
-
-struct map_info mpc1211_flash_map = {
-	.name		= "MPC-1211 FLASH",
-	.size		= 0x80000,
-	.bankwidth	= 1,
-};
-
-static struct mtd_partition mpc1211_partitions[] = {
-	{
-		.name	= "IPL & ETH-BOOT",
-		.offset	= 0x00000000,
-		.size	= 0x10000,
-	},
-	{
-		.name	= "Flash FS",
-		.offset	= 0x00010000,
-		.size	= MTDPART_SIZ_FULL,
-	}
-};
-
-static int __init init_mpc1211_maps(void)
-{
-	int nr_parts;
-
-	mpc1211_flash_map.phys = 0;
-	mpc1211_flash_map.virt = (void __iomem *)P2SEGADDR(0);
-
-	simple_map_init(&mpc1211_flash_map);
-
-	printk(KERN_NOTICE "Probing for flash chips at 0x00000000:\n");
-	flash_mtd = do_map_probe("jedec_probe", &mpc1211_flash_map);
-	if (!flash_mtd) {
-		printk(KERN_NOTICE "Flash chips not detected at either possible location.\n");
-		return -ENXIO;
-	}
-	printk(KERN_NOTICE "MPC-1211: Flash at 0x%08lx\n", mpc1211_flash_map.virt & 0x1fffffff);
-	flash_mtd->module = THIS_MODULE;
-
-	parsed_parts = mpc1211_partitions;
-	nr_parts = ARRAY_SIZE(mpc1211_partitions);
-
-	add_mtd_partitions(flash_mtd, parsed_parts, nr_parts);
-	return 0;
-}
-
-static void __exit cleanup_mpc1211_maps(void)
-{
-	if (parsed_parts)
-		del_mtd_partitions(flash_mtd);
-	else
-		del_mtd_device(flash_mtd);
-	map_destroy(flash_mtd);
-}
-
-module_init(init_mpc1211_maps);
-module_exit(cleanup_mpc1211_maps);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Saito.K & Jeanne <ksaito@interface.co.jp>");
-MODULE_DESCRIPTION("MTD map driver for MPC-1211 boards. Interface");

drivers/rtc/rtc-sh.c

@@ -616,7 +616,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 		goto err_badres;
 	}
 
-	rtc->regbase = (void __iomem *)rtc->res->start;
+	rtc->regbase = ioremap_nocache(rtc->res->start, rtc->regsize);
 	if (unlikely(!rtc->regbase)) {
 		ret = -EINVAL;
 		goto err_badmap;
@@ -626,7 +626,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 					   &sh_rtc_ops, THIS_MODULE);
 	if (IS_ERR(rtc->rtc_dev)) {
 		ret = PTR_ERR(rtc->rtc_dev);
-		goto err_badmap;
+		goto err_unmap;
 	}
 
 	rtc->capabilities = RTC_DEF_CAPABILITIES;
@@ -653,7 +653,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev,
 			"request period IRQ failed with %d, IRQ %d\n", ret,
 			rtc->periodic_irq);
-		goto err_badmap;
+		goto err_unmap;
 	}
 
 	ret = request_irq(rtc->carry_irq, sh_rtc_interrupt, IRQF_DISABLED,
@@ -663,7 +663,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 			"request carry IRQ failed with %d, IRQ %d\n", ret,
 			rtc->carry_irq);
 		free_irq(rtc->periodic_irq, rtc);
-		goto err_badmap;
+		goto err_unmap;
 	}
 
 	ret = request_irq(rtc->alarm_irq, sh_rtc_alarm, IRQF_DISABLED,
@@ -674,7 +674,7 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 			rtc->alarm_irq);
 		free_irq(rtc->carry_irq, rtc);
 		free_irq(rtc->periodic_irq, rtc);
-		goto err_badmap;
+		goto err_unmap;
 	}
 
 	tmp = readb(rtc->regbase + RCR1);
@@ -684,6 +684,8 @@ static int __devinit sh_rtc_probe(struct platform_device *pdev)
 
 	return 0;
 
+err_unmap:
+	iounmap(rtc->regbase);
 err_badmap:
 	release_resource(rtc->res);
 err_badres:
@@ -708,6 +710,8 @@ static int __devexit sh_rtc_remove(struct platform_device *pdev)
 
 	release_resource(rtc->res);
 
+	iounmap(rtc->regbase);
+
 	platform_set_drvdata(pdev, NULL);
 
 	kfree(rtc);

drivers/serial/sh-sci.c

@@ -42,14 +42,12 @@
 #include <linux/console.h>
 #include <linux/platform_device.h>
 #include <linux/serial_sci.h>
-
-#ifdef CONFIG_CPU_FREQ
 #include <linux/notifier.h>
 #include <linux/cpufreq.h>
-#endif
-
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#include <linux/clk.h>
 #include <linux/ctype.h>
+
+#ifdef CONFIG_SUPERH
 #include <asm/clock.h>
 #include <asm/sh_bios.h>
 #include <asm/kgdb.h>
@@ -80,7 +78,7 @@ struct sci_port {
 	struct timer_list	break_timer;
 	int			break_flag;
 
-#if defined(CONFIG_SUPERH) && !defined(CONFIG_SUPERH64)
+#ifdef CONFIG_SUPERH
 	/* Port clock */
 	struct clk		*clk;
 #endif
@@ -365,21 +363,19 @@ static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 static void sci_init_pins_scif(struct uart_port *port, unsigned int cflag)
 {
 	unsigned int fcr_val = 0;
+	unsigned short data;
 
-	if (cflag & CRTSCTS) {
-		fcr_val |= SCFCR_MCE;
-
-		ctrl_outw(0x0000, PORT_PSCR);
-	} else {
-		unsigned short data;
-
-		data = ctrl_inw(PORT_PSCR);
-		data &= 0x033f;
-		data |= 0x0400;
-		ctrl_outw(data, PORT_PSCR);
+	if (port->mapbase == 0xffe00000) {
+		data = ctrl_inw(PSCR);
+		data &= ~0x03cf;
+		if (cflag & CRTSCTS)
+			fcr_val |= SCFCR_MCE;
+		else
+			data |= 0x0340;
 
-		ctrl_outw(ctrl_inw(SCSPTR0) & 0x17, SCSPTR0);
+		ctrl_outw(data, PSCR);
 	}
+	/* SCIF1 and SCIF2 should be setup by board code */
 
 	sci_out(port, SCFCR, fcr_val);
 }

drivers/serial/sh-sci.h

@@ -76,12 +76,13 @@
 # define SCSCR_INIT(port) 0x32	/* TIE=0,RIE=0,TE=1,RE=1,REIE=0,CKE=1 */
 # define SCIF_ONLY
 #elif defined(CONFIG_CPU_SUBTYPE_SH7722)
-# define SCPDR0			0xA405013E	/* 16 bit SCIF0 PSDR */
-# define SCSPTR0		SCPDR0
+# define PADR			0xA4050120
+# define PSDR			0xA405013e
+# define PWDR			0xA4050166
+# define PSCR			0xA405011E
 # define SCIF_ORER		0x0001	/* overrun error bit */
 # define SCSCR_INIT(port)	0x0038	/* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
 # define SCIF_ONLY
-# define PORT_PSCR		0xA405011E
 #elif defined(CONFIG_CPU_SUBTYPE_SH7366)
 # define SCPDR0			0xA405013E      /* 16 bit SCIF0 PSDR */
 # define SCSPTR0		SCPDR0
@@ -320,7 +321,7 @@
   unsigned int addr = port->mapbase + (offset);			\
   if ((size) == 8) {						\
     ctrl_outb(value, addr);					\
-  } else {							\
+  } else if ((size) == 16) {					\
     ctrl_outw(value, addr);					\
   }
 
@@ -451,7 +452,11 @@ SCIF_FNS(SCSPTR,			0,  0, 0x24, 16)
 SCIF_FNS(SCLSR,				0,  0, 0x28, 16)
 #else
 SCIF_FNS(SCFDR,                      0x0e, 16, 0x1C, 16)
+#if defined(CONFIG_CPU_SUBTYPE_SH7722)
+SCIF_FNS(SCSPTR,                        0,  0, 0, 0)
+#else
 SCIF_FNS(SCSPTR,                        0,  0, 0x20, 16)
+#endif
 SCIF_FNS(SCLSR,                         0,  0, 0x24, 16)
 #endif
 #endif
@@ -593,13 +598,25 @@ static inline int sci_rxd_in(struct uart_port *port)
 		return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
 	return 1;
 }
-#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7366)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7366)
 static inline int sci_rxd_in(struct uart_port *port)
 {
 	if (port->mapbase == 0xffe00000)
 		return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
 	return 1;
 }
+#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+	if (port->mapbase == 0xffe00000)
+		return ctrl_inb(PSDR) & 0x02 ? 1 : 0; /* SCIF0 */
+	if (port->mapbase == 0xffe10000)
+		return ctrl_inb(PADR) & 0x40 ? 1 : 0; /* SCIF1 */
+	if (port->mapbase == 0xffe20000)
+		return ctrl_inb(PWDR) & 0x04 ? 1 : 0; /* SCIF2 */
+
+	return 1;
+}
 #elif defined(CONFIG_CPU_SUBTYPE_SH7723)
 static inline int sci_rxd_in(struct uart_port *port)
 {

include/asm-sh/cpu-sh3/dma.h

@@ -3,19 +3,19 @@
 
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7721) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7709)
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
 #define SH_DMAC_BASE	0xa4010020
+#else
+#define SH_DMAC_BASE	0xa4000020
+#endif
 
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709)
 #define DMTE0_IRQ	48
 #define DMTE1_IRQ	49
 #define DMTE2_IRQ	50
 #define DMTE3_IRQ	51
 #define DMTE4_IRQ	76
 #define DMTE5_IRQ	77
-
-#else
-#define SH_DMAC_BASE	0xa4000020
 #endif
 
 /* Definitions for the SuperH DMAC */

include/asm-sh/hw_irq.h

@@ -79,6 +79,10 @@ struct intc_desc {
 	struct intc_sense_reg *sense_regs;
 	unsigned int nr_sense_regs;
 	char *name;
+#ifdef CONFIG_CPU_SH3
+	struct intc_mask_reg *ack_regs;
+	unsigned int nr_ack_regs;
+#endif
 };
 
 #define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
@@ -91,10 +95,25 @@ struct intc_desc symbol __initdata = {					\
 	chipname,							\
 }
 
+#ifdef CONFIG_CPU_SH3
+#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups,	\
+	mask_regs, prio_regs, sense_regs, ack_regs)			\
+struct intc_desc symbol __initdata = {					\
+	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),			\
+	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),			\
+	_INTC_ARRAY(sense_regs),					\
+	chipname,							\
+	_INTC_ARRAY(ack_regs),						\
+}
+#endif
+
 void __init register_intc_controller(struct intc_desc *desc);
 int intc_set_priority(unsigned int irq, unsigned int prio);
 
 void __init plat_irq_setup(void);
+#ifdef CONFIG_CPU_SH3
+void __init plat_irq_setup_sh3(void);
+#endif
 
 enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
        IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,

include/asm-sh/io.h

@@ -268,11 +268,6 @@ unsigned long long peek_real_address_q(unsigned long long addr);
 unsigned long long poke_real_address_q(unsigned long long addr,
 				       unsigned long long val);
 
-/* arch/sh/mm/ioremap_64.c */
-unsigned long onchip_remap(unsigned long addr, unsigned long size,
-			   const char *name);
-extern void onchip_unmap(unsigned long vaddr);
-
 #if !defined(CONFIG_MMU)
 #define virt_to_phys(address)	((unsigned long)(address))
 #define phys_to_virt(address)	((void *)(address))
@@ -302,9 +297,16 @@ extern void onchip_unmap(unsigned long vaddr);
 void __iomem *__ioremap(unsigned long offset, unsigned long size,
 			unsigned long flags);
 void __iounmap(void __iomem *addr);
+
+/* arch/sh/mm/ioremap_64.c */
+unsigned long onchip_remap(unsigned long addr, unsigned long size,
+			   const char *name);
+extern void onchip_unmap(unsigned long vaddr);
 #else
 #define __ioremap(offset, size, flags)	((void __iomem *)(offset))
 #define __iounmap(addr)			do { } while (0)
+#define onchip_remap(addr, size, name)	(addr)
+#define onchip_unmap(addr)		do { } while (0)
 #endif /* CONFIG_MMU */
 
 static inline void __iomem *

include/asm-sh/keyboard.h

@@ -1,13 +0,0 @@
-#ifndef	__ASM_SH_KEYBOARD_H
-#define	__ASM_SH_KEYBOARD_H
-/*
- *	$Id: keyboard.h,v 1.1.1.1 2001/10/15 20:45:09 mrbrown Exp $
- */
-
-#include <linux/kd.h>
-#include <asm/machvec.h>
-
-#ifdef CONFIG_SH_MPC1211
-#include <asm/mpc1211/keyboard-mpc1211.h>
-#endif
-#endif

include/asm-sh/mmu_context.h

@@ -27,6 +27,7 @@
 /* ASID is 8-bit value, so it can't be 0x100 */
 #define MMU_NO_ASID			0x100
 
+#ifdef CONFIG_MMU
 #define asid_cache(cpu)		(cpu_data[cpu].asid_cache)
 #define cpu_context(cpu, mm)	((mm)->context.id[cpu])
 
@@ -38,7 +39,6 @@
  */
 #define MMU_VPN_MASK	0xfffff000
 
-#ifdef CONFIG_MMU
 #if defined(CONFIG_SUPERH32)
 #include "mmu_context_32.h"
 #else
@@ -129,6 +129,8 @@ static inline void switch_mm(struct mm_struct *prev,
 #define destroy_context(mm)		do { } while (0)
 #define set_asid(asid)			do { } while (0)
 #define get_asid()			(0)
+#define cpu_asid(cpu, mm)		({ (void)cpu; 0; })
+#define switch_and_save_asid(asid)	(0)
 #define set_TTB(pgd)			do { } while (0)
 #define get_TTB()			(0)
 #define activate_context(mm,cpu)	do { } while (0)

include/asm-sh/mmzone.h

@@ -41,6 +41,8 @@ void __init plat_mem_setup(void);
 
 /* arch/sh/kernel/setup.c */
 void __init setup_bootmem_allocator(unsigned long start_pfn);
+void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
+			       unsigned long end_pfn);
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_SH_MMZONE_H */

include/asm-sh/mpc1211/dma.h

@@ -1,303 +0,0 @@
-/* $Id: dma.h,v 1.7 1992/12/14 00:29:34 root Exp root $
- * linux/include/asm/dma.h: Defines for using and allocating dma channels.
- * Written by Hennus Bergman, 1992.
- * High DMA channel support & info by Hannu Savolainen
- * and John Boyd, Nov. 1992.
- */
-
-#ifndef _ASM_MPC1211_DMA_H
-#define _ASM_MPC1211_DMA_H
-
-#include <linux/spinlock.h>	/* And spinlocks */
-#include <asm/io.h>		/* need byte IO */
-#include <linux/delay.h>
-
-
-#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
-#define dma_outb	outb_p
-#else
-#define dma_outb	outb
-#endif
-
-#define dma_inb		inb
-
-/*
- * NOTES about DMA transfers:
- *
- *  controller 1: channels 0-3, byte operations, ports 00-1F
- *  controller 2: channels 4-7, word operations, ports C0-DF
- *
- *  - ALL registers are 8 bits only, regardless of transfer size
- *  - channel 4 is not used - cascades 1 into 2.
- *  - channels 0-3 are byte - addresses/counts are for physical bytes
- *  - channels 5-7 are word - addresses/counts are for physical words
- *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
- *  - transfer count loaded to registers is 1 less than actual count
- *  - controller 2 offsets are all even (2x offsets for controller 1)
- *  - page registers for 5-7 don't use data bit 0, represent 128K pages
- *  - page registers for 0-3 use bit 0, represent 64K pages
- *
- * DMA transfers are limited to the lower 16MB of _physical_ memory.  
- * Note that addresses loaded into registers must be _physical_ addresses,
- * not logical addresses (which may differ if paging is active).
- *
- *  Address mapping for channels 0-3:
- *
- *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *    |  ...  |   |  ... |   |  ... |
- *   P7  ...  P0  A7 ... A0  A7 ... A0   
- * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
- *
- *  Address mapping for channels 5-7:
- *
- *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
- *    |  ...  |   \   \   ... \  \  \  ... \  \
- *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
- *    |  ...  |     \   \   ... \  \  \  ... \
- *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0   
- * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
- *
- * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
- * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
- * the hardware level, so odd-byte transfers aren't possible).
- *
- * Transfer count (_not # bytes_) is limited to 64K, represented as actual
- * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
- * and up to 128K bytes may be transferred on channels 5-7 in one operation. 
- *
- */
-
-#define MAX_DMA_CHANNELS	8
-
-/* The maximum address that we can perform a DMA transfer to on this platform */
-#define MAX_DMA_ADDRESS      (PAGE_OFFSET+0x10000000)
-
-/* 8237 DMA controllers */
-#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
-#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
-
-/* DMA controller registers */
-#define DMA1_CMD_REG		0x08	/* command register (w) */
-#define DMA1_STAT_REG		0x08	/* status register (r) */
-#define DMA1_REQ_REG            0x09    /* request register (w) */
-#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
-#define DMA1_MODE_REG		0x0B	/* mode register (w) */
-#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
-#define DMA1_TEMP_REG           0x0D    /* Temporary Register (r) */
-#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
-#define DMA1_CLR_MASK_REG       0x0E    /* Clear Mask */
-#define DMA1_MASK_ALL_REG       0x0F    /* all-channels mask (w) */
-
-#define DMA2_CMD_REG		0xD0	/* command register (w) */
-#define DMA2_STAT_REG		0xD0	/* status register (r) */
-#define DMA2_REQ_REG            0xD2    /* request register (w) */
-#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
-#define DMA2_MODE_REG		0xD6	/* mode register (w) */
-#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
-#define DMA2_TEMP_REG           0xDA    /* Temporary Register (r) */
-#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
-#define DMA2_CLR_MASK_REG       0xDC    /* Clear Mask */
-#define DMA2_MASK_ALL_REG       0xDE    /* all-channels mask (w) */
-
-#define DMA_ADDR_0              0x00    /* DMA address registers */
-#define DMA_ADDR_1              0x02
-#define DMA_ADDR_2              0x04
-#define DMA_ADDR_3              0x06
-#define DMA_ADDR_4              0xC0
-#define DMA_ADDR_5              0xC4
-#define DMA_ADDR_6              0xC8
-#define DMA_ADDR_7              0xCC
-
-#define DMA_CNT_0               0x01    /* DMA count registers */
-#define DMA_CNT_1               0x03
-#define DMA_CNT_2               0x05
-#define DMA_CNT_3               0x07
-#define DMA_CNT_4               0xC2
-#define DMA_CNT_5               0xC6
-#define DMA_CNT_6               0xCA
-#define DMA_CNT_7               0xCE
-
-#define DMA_PAGE_0              0x87    /* DMA page registers */
-#define DMA_PAGE_1              0x83
-#define DMA_PAGE_2              0x81
-#define DMA_PAGE_3              0x82
-#define DMA_PAGE_5              0x8B
-#define DMA_PAGE_6              0x89
-#define DMA_PAGE_7              0x8A
-
-#define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
-#define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
-#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
-
-#define DMA_AUTOINIT	0x10
-
-
-extern spinlock_t  dma_spin_lock;
-
-static __inline__ unsigned long claim_dma_lock(void)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&dma_spin_lock, flags);
-	return flags;
-}
-
-static __inline__ void release_dma_lock(unsigned long flags)
-{
-	spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-/* enable/disable a specific DMA channel */
-static __inline__ void enable_dma(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(dmanr,  DMA1_MASK_REG);
-	else
-		dma_outb(dmanr & 3,  DMA2_MASK_REG);
-}
-
-static __inline__ void disable_dma(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(dmanr | 4,  DMA1_MASK_REG);
-	else
-		dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
-}
-
-/* Clear the 'DMA Pointer Flip Flop'.
- * Write 0 for LSB/MSB, 1 for MSB/LSB access.
- * Use this once to initialize the FF to a known state.
- * After that, keep track of it. :-)
- * --- In order to do that, the DMA routines below should ---
- * --- only be used while holding the DMA lock ! ---
- */
-static __inline__ void clear_dma_ff(unsigned int dmanr)
-{
-	if (dmanr<=3)
-		dma_outb(0,  DMA1_CLEAR_FF_REG);
-	else
-		dma_outb(0,  DMA2_CLEAR_FF_REG);
-}
-
-/* set mode (above) for a specific DMA channel */
-static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
-{
-	if (dmanr<=3)
-		dma_outb(mode | dmanr,  DMA1_MODE_REG);
-	else
-		dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
-}
-
-/* Set only the page register bits of the transfer address.
- * This is used for successive transfers when we know the contents of
- * the lower 16 bits of the DMA current address register, but a 64k boundary
- * may have been crossed.
- */
-static __inline__ void set_dma_page(unsigned int dmanr, unsigned int pagenr)
-{
-	switch(dmanr) {
-		case 0:
-			dma_outb( pagenr       & 0xff, DMA_PAGE_0);
-			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_0 + 0x400);
-			break;
-		case 1:
-			dma_outb( pagenr       & 0xff, DMA_PAGE_1);
-			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_1 + 0x400);
-			break;
-		case 2:
-			dma_outb( pagenr       & 0xff, DMA_PAGE_2);
-			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_2 + 0x400);
-			break;
-		case 3:
-			dma_outb( pagenr       & 0xff, DMA_PAGE_3);
-			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_3 + 0x400);
-			break;
-		case 5:
-			dma_outb( pagenr       & 0xfe, DMA_PAGE_5);
-			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_5 + 0x400);
-			break;
-		case 6:
-			dma_outb( pagenr       & 0xfe, DMA_PAGE_6);
-			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_6 + 0x400);
-			break;
-		case 7:
-			dma_outb( pagenr       & 0xfe, DMA_PAGE_7);
-			dma_outb((pagenr >> 8) & 0xff, DMA_PAGE_7 + 0x400);
-			break;
-       	}
-}
-
-
-/* Set transfer address & page bits for specific DMA channel.
- * Assumes dma flipflop is clear.
- */
-static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
-{
-	set_dma_page(dmanr, a>>16);
-	if (dmanr <= 3)  {
-	    dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
-	}  else  {
-	    dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
-	    dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
-	}
-}
-
-
-/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
- * a specific DMA channel.
- * You must ensure the parameters are valid.
- * NOTE: from a manual: "the number of transfers is one more
- * than the initial word count"! This is taken into account.
- * Assumes dma flip-flop is clear.
- * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
- */
-static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
-{
-        count--;
-	if (dmanr <= 3)  {
-	    dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
-	    dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
-        } else {
-	    dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
-	    dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
-        }
-}
-
-
-/* Get DMA residue count. After a DMA transfer, this
- * should return zero. Reading this while a DMA transfer is
- * still in progress will return unpredictable results.
- * If called before the channel has been used, it may return 1.
- * Otherwise, it returns the number of _bytes_ left to transfer.
- *
- * Assumes DMA flip-flop is clear.
- */
-static __inline__ int get_dma_residue(unsigned int dmanr)
-{
-	unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
-					 : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
-
-	/* using short to get 16-bit wrap around */
-	unsigned short count;
-
-	count = 1 + dma_inb(io_port);
-	count += dma_inb(io_port) << 8;
-	return (dmanr<=3)? count : (count<<1);
-}
-
-
-/* These are in kernel/dma.c: */
-extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
-extern void free_dma(unsigned int dmanr);	/* release it again */
-
-/* From PCI */
-
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
-#define isa_dma_bridge_buggy 	(0)
-#endif
-
-#endif /* _ASM_MPC1211_DMA_H */

include/asm-sh/mpc1211/io.h

@@ -1,22 +0,0 @@
-/*
- * include/asm-sh/mpc1211/io.h
- *
- * Copyright 2001 Saito.K & Jeanne
- *
- * IO functions for an Interface MPC-1211
- */
-
-#ifndef _ASM_SH_IO_MPC1211_H
-#define _ASM_SH_IO_MPC1211_H
-
-#include <linux/time.h>
-
-extern int mpc1211_irq_demux(int irq);
-
-extern void init_mpc1211_IRQ(void);
-extern void heartbeat_mpc1211(void);
-
-extern void mpc1211_rtc_gettimeofday(struct timeval *tv);
-extern int mpc1211_rtc_settimeofday(const struct timeval *tv);
-
-#endif /* _ASM_SH_IO_MPC1211_H */

include/asm-sh/mpc1211/keyboard.h

@@ -1,60 +0,0 @@
-/*
- *  MPC1211 specific keybord definitions
- *  Taken from the old asm-i386/keybord.h for PC/AT-style definitions
- *  created 3 Nov 1996 by Geert Uytterhoeven.
- */
-
-#ifdef __KERNEL__
-
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/kd.h>
-#include <linux/pm.h>
-#include <asm/io.h>
-
-#define KEYBOARD_IRQ			1
-#define DISABLE_KBD_DURING_INTERRUPTS	0
-
-extern int pckbd_setkeycode(unsigned int scancode, unsigned int keycode);
-extern int pckbd_getkeycode(unsigned int scancode);
-extern int pckbd_translate(unsigned char scancode, unsigned char *keycode,
-			   char raw_mode);
-extern char pckbd_unexpected_up(unsigned char keycode);
-extern void pckbd_leds(unsigned char leds);
-extern void pckbd_init_hw(void);
-extern int pckbd_pm_resume(struct pm_dev *, pm_request_t, void *);
-extern pm_callback pm_kbd_request_override;
-
-#define kbd_setkeycode		pckbd_setkeycode
-#define kbd_getkeycode		pckbd_getkeycode
-#define kbd_translate		pckbd_translate
-#define kbd_unexpected_up	pckbd_unexpected_up
-#define kbd_leds		pckbd_leds
-#define kbd_init_hw		pckbd_init_hw
-
-/* resource allocation */
-#define kbd_request_region()
-#define kbd_request_irq(handler) request_irq(KEYBOARD_IRQ, handler, 0, \
-                                             "keyboard", NULL)
-
-/* How to access the keyboard macros on this platform.  */
-#define kbd_read_input() inb(KBD_DATA_REG)
-#define kbd_read_status() inb(KBD_STATUS_REG)
-#define kbd_write_output(val) outb(val, KBD_DATA_REG)
-#define kbd_write_command(val) outb(val, KBD_CNTL_REG)
-
-/* Some stoneage hardware needs delays after some operations.  */
-#define kbd_pause() do { } while(0)
-
-/*
- * Machine specific bits for the PS/2 driver
- */
-
-#define AUX_IRQ 12
-
-#define aux_request_irq(hand, dev_id)					\
-	request_irq(AUX_IRQ, hand, IRQF_SHARED, "PS2 Mouse", dev_id)
-
-#define aux_free_irq(dev_id) free_irq(AUX_IRQ, dev_id)
-
-#endif /* __KERNEL__ */

include/asm-sh/mpc1211/m1543c.h

@@ -1,200 +0,0 @@
-#ifndef __ASM_SH_M1543C_H
-#define __ASM_SH_M1543C_H
-
-/*
- * linux/include/asm-sh/m1543c.h
- * Copyright (C) 2001  Nobuhiro Sakawa
- * M1543C:PCI-ISA Bus Bridge with Super IO Chip support
- *
- * from
- *
- * linux/include/asm-sh/smc37c93x.h
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * SMSC 37C93x Super IO Chip support
- */
-
-/* Default base I/O address */
-#define FDC_PRIMARY_BASE	0x3f0
-#define IDE1_PRIMARY_BASE	0x1f0
-#define IDE1_SECONDARY_BASE	0x170
-#define PARPORT_PRIMARY_BASE	0x378
-#define COM1_PRIMARY_BASE	0x2f8
-#define COM2_PRIMARY_BASE	0x3f8
-#define COM3_PRIMARY_BASE	0x3e8
-#define RTC_PRIMARY_BASE	0x070
-#define KBC_PRIMARY_BASE	0x060
-#define AUXIO_PRIMARY_BASE	0x000	/* XXX */
-#define I8259_M_CR		0x20
-#define I8259_M_MR		0x21
-#define I8259_S_CR		0xa0
-#define I8259_S_MR		0xa1
-
-/* Logical device number */
-#define LDN_FDC			0
-#define LDN_IDE1		1
-#define LDN_IDE2		2
-#define LDN_PARPORT		3
-#define LDN_COM1		4
-#define LDN_COM2		5
-#define LDN_COM3		11
-#define LDN_RTC			6
-#define LDN_KBC			7
-
-/* Configuration port and key */
-#define CONFIG_PORT		0x3f0
-#define INDEX_PORT		CONFIG_PORT
-#define DATA_PORT		0x3f1
-#define CONFIG_ENTER1		0x51
-#define CONFIG_ENTER2		0x23
-#define CONFIG_EXIT		0xbb
-
-/* Configuration index */
-#define CURRENT_LDN_INDEX	0x07
-#define POWER_CONTROL_INDEX	0x22
-#define ACTIVATE_INDEX		0x30
-#define IO_BASE_HI_INDEX	0x60
-#define IO_BASE_LO_INDEX	0x61
-#define IRQ_SELECT_INDEX	0x70
-#define PS2_IRQ_INDEX		0x72
-#define DMA_SELECT_INDEX	0x74
-
-/* UART stuff. Only for debugging.  */
-/* UART Register */
-
-#define UART_RBR	0x0	/* Receiver Buffer Register (Read Only) */
-#define UART_THR	0x0	/* Transmitter Holding Register (Write Only) */
-#define UART_IER	0x2	/* Interrupt Enable Register */
-#define UART_IIR	0x4	/* Interrupt Ident Register (Read Only) */
-#define UART_FCR	0x4	/* FIFO Control Register (Write Only) */
-#define UART_LCR	0x6	/* Line Control Register */
-#define UART_MCR	0x8	/* MODEM Control Register */
-#define UART_LSR	0xa	/* Line Status Register */
-#define UART_MSR	0xc	/* MODEM Status Register */
-#define UART_SCR	0xe	/* Scratch Register */
-#define UART_DLL	0x0	/* Divisor Latch (LS) */
-#define UART_DLM	0x2	/* Divisor Latch (MS) */
-
-#ifndef __ASSEMBLY__
-typedef struct uart_reg {
-	volatile __u16 rbr;
-	volatile __u16 ier;
-	volatile __u16 iir;
-	volatile __u16 lcr;
-	volatile __u16 mcr;
-	volatile __u16 lsr;
-	volatile __u16 msr;
-	volatile __u16 scr;
-} uart_reg;
-#endif /* ! __ASSEMBLY__ */
-
-/* Alias for Write Only Register */
-
-#define thr	rbr
-#define tcr	iir
-
-/* Alias for Divisor Latch Register */
-
-#define dll	rbr
-#define dlm	ier
-#define fcr	iir
-
-/* Interrupt Enable Register */
-
-#define IER_ERDAI	0x0100	/* Enable Received Data Available Interrupt */
-#define IER_ETHREI	0x0200	/* Enable Transmitter Holding Register Empty Interrupt */
-#define IER_ELSI	0x0400	/* Enable Receiver Line Status Interrupt */
-#define IER_EMSI	0x0800	/* Enable MODEM Status Interrupt */
-
-/* Interrupt Ident Register */
-
-#define IIR_IP		0x0100	/* "0" if Interrupt Pending */
-#define IIR_IIB0	0x0200	/* Interrupt ID Bit 0 */
-#define IIR_IIB1	0x0400	/* Interrupt ID Bit 1 */
-#define IIR_IIB2	0x0800	/* Interrupt ID Bit 2 */
-#define IIR_FIFO	0xc000	/* FIFOs enabled */
-
-/* FIFO Control Register */
-
-#define FCR_FEN		0x0100	/* FIFO enable */
-#define FCR_RFRES	0x0200	/* Receiver FIFO reset */
-#define FCR_TFRES	0x0400	/* Transmitter FIFO reset */
-#define FCR_DMA		0x0800	/* DMA mode select */
-#define FCR_RTL		0x4000	/* Receiver triger (LSB) */
-#define FCR_RTM		0x8000	/* Receiver triger (MSB) */
-
-/* Line Control Register */
-
-#define LCR_WLS0	0x0100	/* Word Length Select Bit 0 */
-#define LCR_WLS1	0x0200	/* Word Length Select Bit 1 */
-#define LCR_STB		0x0400	/* Number of Stop Bits */
-#define LCR_PEN		0x0800	/* Parity Enable */
-#define LCR_EPS		0x1000	/* Even Parity Select */
-#define LCR_SP		0x2000	/* Stick Parity */
-#define LCR_SB		0x4000	/* Set Break */
-#define LCR_DLAB	0x8000	/* Divisor Latch Access Bit */
-
-/* MODEM Control Register */
-
-#define MCR_DTR		0x0100	/* Data Terminal Ready */
-#define MCR_RTS		0x0200	/* Request to Send */
-#define MCR_OUT1	0x0400	/* Out 1 */
-#define MCR_IRQEN	0x0800	/* IRQ Enable */
-#define MCR_LOOP	0x1000	/* Loop */
-
-/* Line Status Register */
-
-#define LSR_DR		0x0100	/* Data Ready */
-#define LSR_OE		0x0200	/* Overrun Error */
-#define LSR_PE		0x0400	/* Parity Error */
-#define LSR_FE		0x0800	/* Framing Error */
-#define LSR_BI		0x1000	/* Break Interrupt */
-#define LSR_THRE	0x2000	/* Transmitter Holding Register Empty */
-#define LSR_TEMT	0x4000	/* Transmitter Empty */
-#define LSR_FIFOE	0x8000	/* Receiver FIFO error */
-
-/* MODEM Status Register */
-
-#define MSR_DCTS	0x0100	/* Delta Clear to Send */
-#define MSR_DDSR	0x0200	/* Delta Data Set Ready */
-#define MSR_TERI	0x0400	/* Trailing Edge Ring Indicator */
-#define MSR_DDCD	0x0800	/* Delta Data Carrier Detect */
-#define MSR_CTS		0x1000	/* Clear to Send */
-#define MSR_DSR		0x2000	/* Data Set Ready */
-#define MSR_RI		0x4000	/* Ring Indicator */
-#define MSR_DCD		0x8000	/* Data Carrier Detect */
-
-/* Baud Rate Divisor */
-
-#define UART_CLK	(1843200)	/* 1.8432 MHz */
-#define UART_BAUD(x)	(UART_CLK / (16 * (x)))
-
-/* RTC register definition */
-#define RTC_SECONDS             0
-#define RTC_SECONDS_ALARM       1
-#define RTC_MINUTES             2
-#define RTC_MINUTES_ALARM       3
-#define RTC_HOURS               4
-#define RTC_HOURS_ALARM         5
-#define RTC_DAY_OF_WEEK         6
-#define RTC_DAY_OF_MONTH        7
-#define RTC_MONTH               8
-#define RTC_YEAR                9
-#define RTC_FREQ_SELECT		10
-# define RTC_UIP 0x80
-# define RTC_DIV_CTL 0x70
-/* This RTC can work under 32.768KHz clock only.  */
-# define RTC_OSC_ENABLE 0x20
-# define RTC_OSC_DISABLE 0x00
-#define RTC_CONTROL     	11
-# define RTC_SET 0x80
-# define RTC_PIE 0x40
-# define RTC_AIE 0x20
-# define RTC_UIE 0x10
-# define RTC_SQWE 0x08
-# define RTC_DM_BINARY 0x04
-# define RTC_24H 0x02
-# define RTC_DST_EN 0x01
-
-#endif  /* __ASM_SH_M1543C_H */

include/asm-sh/mpc1211/mc146818rtc.h

@@ -1,6 +0,0 @@
-/*
- * MPC1211 uses PC/AT style RTC definitions.
- */
-#include <asm-x86/mc146818rtc_32.h>
-
-

include/asm-sh/mpc1211/mpc1211.h

@@ -1,18 +0,0 @@
-#ifndef __ASM_SH_MPC1211_H
-#define __ASM_SH_MPC1211_H
-
-/*
- * linux/include/asm-sh/mpc1211.h
- *
- * Copyright (C) 2001  Saito.K & Jeanne
- *
- * Interface MPC-1211 support
- */
-
-#define PA_PCI_IO       (0xa4000000)    /* PCI I/O space */
-#define PA_PCI_MEM      (0xb0000000)    /* PCI MEM space */
-
-#define PCIPAR          (0xa4000cf8)    /* PCI Config address */
-#define PCIPDR          (0xa4000cfc)    /* PCI Config data    */
-
-#endif  /* __ASM_SH_MPC1211_H */

include/asm-sh/mpc1211/pci.h

@@ -1,38 +0,0 @@
-/*
- *	Low-Level PCI Support for MPC-1211
- *
- *      (c) 2002 Saito.K & Jeanne
- *
- */
-
-#ifndef _PCI_MPC1211_H_
-#define _PCI_MPC1211_H_
-
-#include <linux/pci.h>
-
-/* set debug level 4=verbose...1=terse */
-//#define DEBUG_PCI 3
-#undef DEBUG_PCI
-
-#ifdef DEBUG_PCI
-#define PCIDBG(n, x...) { if(DEBUG_PCI>=n) printk(x); }
-#else
-#define PCIDBG(n, x...)
-#endif
-
-/* startup values */
-#define PCI_PROBE_BIOS    1
-#define PCI_PROBE_CONF1   2
-#define PCI_PROBE_CONF2   4
-#define PCI_NO_CHECKS     0x400
-#define PCI_ASSIGN_ROMS   0x1000
-#define PCI_BIOS_IRQ_SCAN 0x2000
-
-/* MPC-1211 Specific Values */
-#define PCIPAR            (0xa4000cf8)    /* PCI Config address */
-#define PCIPDR            (0xa4000cfc)    /* PCI Config data    */
-
-#define PA_PCI_IO         (0xa4000000)    /* PCI I/O space */
-#define PA_PCI_MEM        (0xb0000000)    /* PCI MEM space */
-
-#endif /* _PCI_MPC1211_H_ */

include/asm-sh/r7780rp.h

@@ -193,8 +193,6 @@
 #define IRQ_SCIF0		(HL_FPGA_IRQ_BASE + 15)
 #define IRQ_SCIF1		(HL_FPGA_IRQ_BASE + 16)
 
-unsigned char *highlander_init_irq_r7780mp(void);
-unsigned char *highlander_init_irq_r7780rp(void);
-unsigned char *highlander_init_irq_r7785rp(void);
+unsigned char *highlander_plat_irq_setup(void);
 
 #endif  /* __ASM_SH_RENESAS_R7780RP */

include/asm-sh/tlb_64.h

@@ -56,6 +56,7 @@ static inline void __flush_tlb_slot(unsigned long long slot)
 	__asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot));
 }
 
+#ifdef CONFIG_MMU
 /* arch/sh64/mm/tlb.c */
 int sh64_tlb_init(void);
 unsigned long long sh64_next_free_dtlb_entry(void);
@@ -64,6 +65,13 @@ int sh64_put_wired_dtlb_entry(unsigned long long entry);
 void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
 			 unsigned long asid, unsigned long paddr);
 void sh64_teardown_tlb_slot(unsigned long long config_addr);
-
+#else
+#define sh64_tlb_init()					do { } while (0)
+#define sh64_next_free_dtlb_entry()			(0)
+#define sh64_get_wired_dtlb_entry()			(0)
+#define sh64_put_wired_dtlb_entry(entry)		do { } while (0)
+#define sh64_setup_tlb_slot(conf, virt, asid, phys)	do { } while (0)
+#define sh64_teardown_tlb_slot(addr)			do { } while (0)
+#endif /* CONFIG_MMU */
 #endif /* __ASSEMBLY__ */
 #endif /* __ASM_SH_TLB_64_H */

include/asm-sh/topology.h

@@ -29,6 +29,17 @@
 	.nr_balance_failed	= 0,			\
 }
 
+#define cpu_to_node(cpu)	((void)(cpu),0)
+#define parent_node(node)	((void)(node),0)
+
+#define node_to_cpumask(node)	((void)node, cpu_online_map)
+#define node_to_first_cpu(node)	((void)(node),0)
+
+#define pcibus_to_node(bus)	((void)(bus), -1)
+#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
+					CPU_MASK_ALL : \
+					node_to_cpumask(pcibus_to_node(bus)) \
+				)
 #endif
 
 #include <asm-generic/topology.h>

include/asm-sh/uaccess_64.h

@@ -274,7 +274,9 @@ struct exception_table_entry
 	unsigned long insn, fixup;
 };
 
+#ifdef CONFIG_MMU
 #define ARCH_HAS_SEARCH_EXTABLE
+#endif
 
 /* Returns 0 if exception not found and fixup.unit otherwise.  */
 extern unsigned long search_exception_table(unsigned long addr);