hwmon: (it87) Use pr_fmt and pr_<level>

Added #define pr_fmt KBUILD_MODNAME ": " fmt
Converted printks to pr_<level>
Coalesced any long formats
Removed prefixes from formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

drivers/hwmon/it87.c

@@ -38,6 +38,8 @@
  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -1570,26 +1572,25 @@ static int __init it87_find(unsigned short *address,
 	case 0xffff:	/* No device at all */
 		goto exit;
 	default:
-		pr_debug(DRVNAME ": Unsupported chip (DEVID=0x%x)\n",
-			 chip_type);
+		pr_debug("Unsupported chip (DEVID=0x%x)\n", chip_type);
 		goto exit;
 	}
 
 	superio_select(PME);
 	if (!(superio_inb(IT87_ACT_REG) & 0x01)) {
-		pr_info("it87: Device not activated, skipping\n");
+		pr_info("Device not activated, skipping\n");
 		goto exit;
 	}
 
 	*address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1);
 	if (*address == 0) {
-		pr_info("it87: Base address not set, skipping\n");
+		pr_info("Base address not set, skipping\n");
 		goto exit;
 	}
 
 	err = 0;
 	sio_data->revision = superio_inb(DEVREV) & 0x0f;
-	pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n",
+	pr_info("Found IT%04xF chip at 0x%x, revision %d\n",
 		chip_type, *address, sio_data->revision);
 
 	/* in8 (Vbat) is always internal */
@@ -1615,7 +1616,7 @@ static int __init it87_find(unsigned short *address,
 		} else {
 			/* We need at least 4 VID pins */
 			if (reg & 0x0f) {
-				pr_info("it87: VID is disabled (pins used for GPIO)\n");
+				pr_info("VID is disabled (pins used for GPIO)\n");
 				sio_data->skip_vid = 1;
 			}
 		}
@@ -1651,7 +1652,7 @@ static int __init it87_find(unsigned short *address,
 		if (sio_data->type == it8720 && !(reg & (1 << 1))) {
 			reg |= (1 << 1);
 			superio_outb(IT87_SIO_PINX2_REG, reg);
-			pr_notice("it87: Routing internal VCCH to in7\n");
+			pr_notice("Routing internal VCCH to in7\n");
 		}
 		if (reg & (1 << 0))
 			sio_data->internal |= (1 << 0);
@@ -1661,7 +1662,7 @@ static int __init it87_find(unsigned short *address,
 		sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
 	}
 	if (sio_data->beep_pin)
-		pr_info("it87: Beeping is supported\n");
+		pr_info("Beeping is supported\n");
 
 	/* Disable specific features based on DMI strings */
 	board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
@@ -1675,8 +1676,7 @@ static int __init it87_find(unsigned short *address,
 			   the PWM2 duty cycle, so we disable it.
 			   I use the board name string as the trigger in case
 			   the same board is ever used in other systems. */
-			pr_info("it87: Disabling pwm2 due to "
-				"hardware constraints\n");
+			pr_info("Disabling pwm2 due to hardware constraints\n");
 			sio_data->skip_pwm = (1 << 1);
 		}
 	}
@@ -2189,28 +2189,26 @@ static int __init it87_device_add(unsigned short address,
 	pdev = platform_device_alloc(DRVNAME, address);
 	if (!pdev) {
 		err = -ENOMEM;
-		printk(KERN_ERR DRVNAME ": Device allocation failed\n");
+		pr_err("Device allocation failed\n");
 		goto exit;
 	}
 
 	err = platform_device_add_resources(pdev, &res, 1);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device resource addition failed "
-		       "(%d)\n", err);
+		pr_err("Device resource addition failed (%d)\n", err);
 		goto exit_device_put;
 	}
 
 	err = platform_device_add_data(pdev, sio_data,
 				       sizeof(struct it87_sio_data));
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
+		pr_err("Platform data allocation failed\n");
 		goto exit_device_put;
 	}
 
 	err = platform_device_add(pdev);
 	if (err) {
-		printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
-		       err);
+		pr_err("Device addition failed (%d)\n", err);
 		goto exit_device_put;
 	}