Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits)
  [ARM] 3541/2: workaround for PXA27x erratum E7
  [ARM] nommu: provide a way for correct control register value selection
  [ARM] 3705/1: add supersection support to ioremap()
  [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure
  [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support
  [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency
  [ARM] 3703/1: Add help description for ARCH_EP80219
  [ARM] 3678/1: MMC: Make OMAP MMC work
  [ARM] 3677/1: OMAP: Update H2 defconfig
  [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1
  [ARM] Add section support to ioremap
  [ARM] Fix sa11x0 SDRAM selection
  [ARM] Set bit 4 on section mappings correctly depending on CPU
  [ARM] 3666/1: TRIZEPS4 [1/5] core
  ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring
  ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE
  ARM: OMAP: Update dmtimers
  ARM: OMAP: Make clock variables static
  ARM: OMAP: Fix GPMC compilation when DEBUG is defined
  ARM: OMAP: Mux updates for external DMA and GPIO
  ...

arch/arm/Kconfig

@@ -121,11 +121,11 @@ config ARCH_VERSATILE
 	help
 	  This enables support for ARM Ltd Versatile board.
 
-config ARCH_AT91RM9200
-	bool "Atmel AT91RM9200"
+config ARCH_AT91
+	bool "Atmel AT91"
 	help
-	  Say Y here if you intend to run this kernel on an Atmel
-	  AT91RM9200-based board.
+	  This enables support for systems based on the Atmel AT91RM9200
+	  and AT91SAM9xxx processors.
 
 config ARCH_CLPS7500
 	bool "Cirrus CL-PS7500FE"
@@ -547,7 +547,7 @@ config LEDS
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-		   ARCH_AT91RM9200
+		   ARCH_AT91RM9200 || MACH_TRIZEPS4
 	help
 	  If you say Y here, the LEDs on your machine will be used
 	  to provide useful information about your current system status.
@@ -678,7 +678,7 @@ config XIP_PHYS_ADDR
 
 endmenu
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP)
 
 menu "CPU Frequency scaling"
 

arch/arm/Makefile

@@ -114,7 +114,7 @@ endif
  machine-$(CONFIG_ARCH_H720X)	   := h720x
  machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
  machine-$(CONFIG_ARCH_REALVIEW)   := realview
- machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
+ machine-$(CONFIG_ARCH_AT91)       := at91rm9200
  machine-$(CONFIG_ARCH_EP93XX)     := ep93xx
  machine-$(CONFIG_ARCH_PNX4008)    := pnx4008
  machine-$(CONFIG_ARCH_NETX)       := netx

arch/arm/boot/compressed/head.S

@@ -447,8 +447,11 @@ __common_mmu_cache_on:
 		mov	r1, #-1
 		mcr	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcr	p15, 0, r1, c3, c0, 0	@ load domain access control
-		mcr	p15, 0, r0, c1, c0, 0	@ load control register
-		mov	pc, lr
+		b	1f
+		.align	5			@ cache line aligned
+1:		mcr	p15, 0, r0, c1, c0, 0	@ load control register
+		mrc	p15, 0, r0, c1, c0, 0	@ and read it back to
+		sub	pc, lr, r0, lsr #32	@ properly flush pipeline
 
 /*
  * All code following this line is relocatable.  It is relocated by

arch/arm/configs/at91rm9200dk_defconfig

@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/at91rm9200ek_defconfig

@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/ateb9200_defconfig

@@ -105,6 +105,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/carmeva_defconfig

@@ -82,6 +82,7 @@ CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/csb337_defconfig

@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/csb637_defconfig

@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/kafa_defconfig

@@ -105,6 +105,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/kb9202_defconfig

@@ -80,6 +80,7 @@ CONFIG_KMOD=y
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_AAEC2000 is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 
 #

arch/arm/configs/omap_h2_1610_defconfig

@@ -1,19 +1,20 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Wed Nov  9 18:53:40 2005
+# Linux kernel version: 2.6.17
+# Thu Jun 29 15:25:18 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
-CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
@@ -29,26 +30,26 @@ CONFIG_SYSVIPC=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
+CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -56,7 +57,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
@@ -64,6 +64,7 @@ CONFIG_OBSOLETE_MODPARM=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -81,16 +82,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91RM9200 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
@@ -98,11 +109,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
 
 #
 # TI OMAP Implementations
@@ -141,6 +147,7 @@ CONFIG_ARCH_OMAP16XX=y
 CONFIG_MACH_OMAP_H2=y
 # CONFIG_MACH_OMAP_H3 is not set
 # CONFIG_MACH_OMAP_OSK is not set
+# CONFIG_MACH_NOKIA770 is not set
 # CONFIG_MACH_OMAP_GENERIC is not set
 
 #
@@ -177,7 +184,6 @@ CONFIG_ARM_THUMB=y
 #
 # Bus support
 #
-CONFIG_ISA_DMA_API=y
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -189,6 +195,8 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_PREEMPT=y
 CONFIG_NO_IDLE_HZ=y
+CONFIG_HZ=128
+# CONFIG_AEABI is not set
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -249,6 +257,8 @@ CONFIG_BINFMT_AOUT=y
 # Power management options
 #
 CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
 # CONFIG_APM is not set
 
 #
@@ -259,9 +269,12 @@ CONFIG_NET=y
 #
 # Networking options
 #
+# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -278,12 +291,18 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -295,6 +314,11 @@ CONFIG_TCP_CONG_BIC=y
 # SCTP Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
@@ -312,7 +336,6 @@ CONFIG_TCP_CONG_BIC=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
@@ -333,6 +356,12 @@ CONFIG_TCP_CONG_BIC=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
 
 #
 # Memory Technology Devices (MTD)
@@ -526,6 +555,7 @@ CONFIG_SERIO_SERPORT=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -534,6 +564,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #
@@ -559,8 +590,8 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -572,6 +603,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 #
 # TPM devices
 #
+# CONFIG_TCG_TPM is not set
 # CONFIG_TELCLOCK is not set
 
 #
@@ -579,11 +611,23 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 #
 # CONFIG_I2C is not set
 
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
@@ -591,13 +635,23 @@ CONFIG_HWMON=y
 #
 
 #
-# Multimedia Capabilities Port drivers
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
 #
 
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -607,11 +661,13 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
 # CONFIG_FB_CFB_FILLRECT is not set
 # CONFIG_FB_CFB_COPYAREA is not set
 # CONFIG_FB_CFB_IMAGEBLIT is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -635,7 +691,6 @@ CONFIG_FONT_8x16=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-# CONFIG_FONT_RL is not set
 
 #
 # Logo configuration
@@ -660,16 +715,15 @@ CONFIG_SOUND=y
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
-# CONFIG_OBSOLETE_OSS_DRIVER is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_OSS is not set
 
 #
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB is not set
 
 #
@@ -680,23 +734,18 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
 
 #
 # MMC/SD Card support
 #
 # CONFIG_MMC is not set
 
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+
 #
 # File systems
 #
@@ -704,14 +753,15 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -741,7 +791,7 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -843,10 +893,13 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+# CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
 # CONFIG_DEBUG_USER is not set
 
 #

arch/arm/configs/onearm_defconfig

@@ -85,6 +85,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91RM9200=y
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set

arch/arm/configs/trizeps4_defconfig

@@ -0,0 +1,1579 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.17
+# Sat Jun 24 22:45:14 2006
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_SYSCTL=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+# CONFIG_RELAY is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_UID16=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SHMEM=y
+CONFIG_SLAB=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+CONFIG_OBSOLETE_INTERMODULE=y
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+# CONFIG_BLK_DEV_IO_TRACE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_AT91RM9200 is not set
+
+#
+# Intel PXA2xx Implementations
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_MACH_TRIZEPS4=y
+CONFIG_MACH_TRIZEPS4_CONXS=y
+# CONFIG_MACH_TRIZEPS4_ANY is not set
+CONFIG_PXA27x=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+CONFIG_PCCARD=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+CONFIG_PCMCIA_PXA2XX=m
+
+#
+# Kernel Features
+#
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_LEDS=y
+CONFIG_LEDS_TIMER=y
+CONFIG_LEDS_CPU=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/nfs ip=bootp console=ttyS0,115200n8"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_LEGACY=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+CONFIG_IP_NF_QUEUE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_PXA_FICP is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+CONFIG_NFTL=y
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=y
+# CONFIG_RFD_FTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+# CONFIG_MTD_CFI_NOSWAP is not set
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_LE_BYTE_SWAP=y
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_TRIZEPS4 is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=y
+CONFIG_MTD_DOCPROBE=y
+CONFIG_MTD_DOCECC=y
+# CONFIG_MTD_DOCPROBE_ADVANCED is not set
+CONFIG_MTD_DOCPROBE_ADDRESS=0
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_H1900 is not set
+CONFIG_MTD_NAND_IDS=y
+CONFIG_MTD_NAND_DISKONCHIP=y
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECS=m
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_IDE_PXA_CF=y
+CONFIG_IDE_ARM=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# PCMCIA SCSI adapter support
+#
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+CONFIG_DAVICOM_PHY=y
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
+
+#
+# Obsolete Wireless cards support (pre-802.11)
+#
+# CONFIG_STRIP is not set
+# CONFIG_PCMCIA_WAVELAN is not set
+# CONFIG_PCMCIA_NETWAVE is not set
+
+#
+# Wireless 802.11 Frequency Hopping cards support
+#
+# CONFIG_PCMCIA_RAYCS is not set
+
+#
+# Wireless 802.11b ISA/PCI cards support
+#
+CONFIG_HERMES=m
+# CONFIG_ATMEL is not set
+
+#
+# Wireless 802.11b Pcmcia/Cardbus cards support
+#
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+CONFIG_AIRO_CS=m
+# CONFIG_PCMCIA_WL3501 is not set
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_HOSTAP_CS=m
+CONFIG_NET_WIRELESS=y
+
+#
+# PCMCIA network device support
+#
+# CONFIG_NET_PCMCIA is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+# CONFIG_PPPOE is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=640
+CONFIG_INPUT_TSDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_SERIAL=y
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_SA1100_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+# CONFIG_TELCLOCK is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_PXA=y
+CONFIG_I2C_PXA_SLAVE=y
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+CONFIG_UCB1400=y
+CONFIG_UCB1400_TS=y
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_DEVICE=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_DEVICE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+CONFIG_SND_PXA2XX_PCM=y
+CONFIG_SND_PXA2XX_AC97=y
+
+#
+# USB devices
+#
+CONFIG_SND_USB_AUDIO=m
+
+#
+# PCMCIA devices
+#
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+CONFIG_USB_HIDINPUT=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+CONFIG_USB_TOUCHSCREEN=m
+# CONFIG_USB_TOUCHSCREEN_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN_PANJIT is not set
+# CONFIG_USB_TOUCHSCREEN_3M is not set
+# CONFIG_USB_TOUCHSCREEN_ITM is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
+CONFIG_USB_GADGET_DUMMY_HCD=y
+CONFIG_USB_DUMMY_HCD=y
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+
+#
+# MMC/SD Card support
+#
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_PXA=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS_FS=y
+CONFIG_JFFS_FS_VERBOSE=0
+CONFIG_JFFS_PROC_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_SUMMARY is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+CONFIG_LDM_PARTITION=y
+# CONFIG_LDM_DEBUG is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
+CONFIG_DEBUG_USER=y
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_SECLVL is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC32=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_REED_SOLOMON=y
+CONFIG_REED_SOLOMON_DEC16=y

arch/arm/kernel/Makefile

@@ -25,7 +25,7 @@ obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
 
-obj-$(CONFIG_IWMMXT)		+= iwmmxt.o
+obj-$(CONFIG_IWMMXT)		+= iwmmxt.o iwmmxt-notifier.o
 AFLAGS_iwmmxt.o			:= -Wa,-mcpu=iwmmxt
 
 ifneq ($(CONFIG_ARCH_EBSA110),y)

arch/arm/kernel/asm-offsets.c

@@ -105,6 +105,7 @@ int main(void)
   BLANK();
   DEFINE(PROC_INFO_SZ,		sizeof(struct proc_info_list));
   DEFINE(PROCINFO_INITFUNC,	offsetof(struct proc_info_list, __cpu_flush));
-  DEFINE(PROCINFO_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_mmu_flags));
+  DEFINE(PROCINFO_MM_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_mm_mmu_flags));
+  DEFINE(PROCINFO_IO_MMUFLAGS,	offsetof(struct proc_info_list, __cpu_io_mmu_flags));
   return 0; 
 }

arch/arm/kernel/entry-armv.S

@@ -589,9 +589,7 @@ ENTRY(__switch_to)
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r6, c3, c0, 0		@ Set domain register
 #endif
-#if defined(CONFIG_IWMMXT)
-	bl	iwmmxt_task_switch
-#elif defined(CONFIG_CPU_XSCALE)
+#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
 	add	r4, r2, #TI_CPU_DOMAIN + 40	@ cpu_context_save->extra
 	ldmib	r4, {r4, r5}
 	mar	acc0, r4, r5

arch/arm/kernel/head.S

@@ -220,7 +220,7 @@ __create_page_tables:
 	teq	r0, r6
 	bne	1b
 
-	ldr	r7, [r10, #PROCINFO_MMUFLAGS]	@ mmuflags
+	ldr	r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
 
 	/*
 	 * Create identity mapping for first MB of kernel to
@@ -271,8 +271,7 @@ __create_page_tables:
 #endif
 
 #ifdef CONFIG_DEBUG_LL
-	bic	r7, r7, #0x0c			@ turn off cacheable
-						@ and bufferable bits
+	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
 	/*
 	 * Map in IO space for serial debugging.
 	 * This allows debug messages to be output

arch/arm/kernel/iwmmxt-notifier.c

@@ -0,0 +1,64 @@
+/*
+ *  linux/arch/arm/kernel/iwmmxt-notifier.c
+ *
+ *  XScale iWMMXt (Concan) context switching and handling
+ *
+ *  Initial code:
+ *  Copyright (c) 2003, Intel Corporation
+ *
+ *  Full lazy switching support, optimizations and more, by Nicolas Pitre
+ *  Copyright (c) 2003-2004, MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <asm/thread_notify.h>
+#include <asm/io.h>
+
+static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
+{
+	struct thread_info *thread = t;
+
+	switch (cmd) {
+	case THREAD_NOTIFY_FLUSH:
+		/*
+		 * flush_thread() zeroes thread->fpstate, so no need
+		 * to do anything here.
+		 *
+		 * FALLTHROUGH: Ensure we don't try to overwrite our newly
+		 * initialised state information on the first fault.
+		 */
+
+	case THREAD_NOTIFY_RELEASE:
+		iwmmxt_task_release(thread);
+		break;
+
+	case THREAD_NOTIFY_SWITCH:
+		iwmmxt_task_switch(thread);
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block iwmmxt_notifier_block = {
+	.notifier_call	= iwmmxt_do,
+};
+
+static int __init iwmmxt_init(void)
+{
+	thread_register_notifier(&iwmmxt_notifier_block);
+
+	return 0;
+}
+
+late_initcall(iwmmxt_init);

arch/arm/kernel/iwmmxt.S

@@ -271,30 +271,27 @@ ENTRY(iwmmxt_task_restore)
 /*
  * Concan handling on task switch
  *
- * r0 = previous task_struct pointer (must be preserved)
- * r1 = previous thread_info pointer
- * r2 = next thread_info pointer (must be preserved)
+ * r0 = next thread_info pointer
  *
- * Called only from __switch_to with task preemption disabled.
- * No need to care about preserving r4 and above.
+ * Called only from the iwmmxt notifier with task preemption disabled.
  */
 ENTRY(iwmmxt_task_switch)
 
-	mrc	p15, 0, r4, c15, c1, 0
-	tst	r4, #0x3			@ CP0 and CP1 accessible?
+	mrc	p15, 0, r1, c15, c1, 0
+	tst	r1, #0x3			@ CP0 and CP1 accessible?
 	bne	1f				@ yes: block them for next task
 
-	ldr	r5, =concan_owner
-	add	r6, r2, #TI_IWMMXT_STATE	@ get next task Concan save area
-	ldr	r5, [r5]			@ get current Concan owner
-	teq	r5, r6				@ next task owns it?
+	ldr	r2, =concan_owner
+	add	r3, r0, #TI_IWMMXT_STATE	@ get next task Concan save area
+	ldr	r2, [r2]			@ get current Concan owner
+	teq	r2, r3				@ next task owns it?
 	movne	pc, lr				@ no: leave Concan disabled
 
-1:	eor	r4, r4, #3			@ flip Concan access
-	mcr	p15, 0, r4, c15, c1, 0
+1:	eor	r1, r1, #3			@ flip Concan access
+	mcr	p15, 0, r1, c15, c1, 0
 
-	mrc	p15, 0, r4, c2, c0, 0
-	sub	pc, lr, r4, lsr #32		@ cpwait and return
+	mrc	p15, 0, r1, c2, c0, 0
+	sub	pc, lr, r1, lsr #32		@ cpwait and return
 
 /*
  * Remove Concan ownership of given task

arch/arm/kernel/process.c

@@ -352,9 +352,6 @@ void flush_thread(void)
 	memset(&thread->fpstate, 0, sizeof(union fp_state));
 
 	thread_notify(THREAD_NOTIFY_FLUSH, thread);
-#if defined(CONFIG_IWMMXT)
-	iwmmxt_task_release(thread);
-#endif
 }
 
 void release_thread(struct task_struct *dead_task)
@@ -362,9 +359,6 @@ void release_thread(struct task_struct *dead_task)
 	struct thread_info *thread = task_thread_info(dead_task);
 
 	thread_notify(THREAD_NOTIFY_RELEASE, thread);
-#if defined(CONFIG_IWMMXT)
-	iwmmxt_task_release(thread);
-#endif
 }
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");

arch/arm/kernel/setup.c

@@ -344,9 +344,9 @@ static void __init setup_processor(void)
 	cpu_cache = *list->cache;
 #endif
 
-	printk("CPU: %s [%08x] revision %d (ARMv%s)\n",
+	printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08x\n",
 	       cpu_name, processor_id, (int)processor_id & 15,
-	       proc_arch[cpu_architecture()]);
+	       proc_arch[cpu_architecture()], cr_alignment);
 
 	sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS);
 	sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);

arch/arm/mach-at91rm9200/Kconfig

@@ -1,6 +1,21 @@
-if ARCH_AT91RM9200
+if ARCH_AT91
+
+menu "Atmel AT91 System-on-Chip"
+
+comment "Atmel AT91 Processors"
+
+config ARCH_AT91RM9200
+	bool "AT91RM9200"
 
-menu "AT91RM9200 Implementations"
+config ARCH_AT91SAM9260
+	bool "AT91SAM9260"
+
+config ARCH_AT91SAM9261
+	bool "AT91SAM9261"
+
+# ----------------------------------------------------------
+
+if ARCH_AT91RM9200
 
 comment "AT91RM9200 Board Type"
 
@@ -8,58 +23,87 @@ config MACH_ONEARM
 	bool "Ajeco 1ARM Single Board Computer"
 	depends on ARCH_AT91RM9200
 	help
-	  Select this if you are using Ajeco's 1ARM Single Board Computer
+	  Select this if you are using Ajeco's 1ARM Single Board Computer.
+	  <http://www.ajeco.fi/products.htm>
 
 config ARCH_AT91RM9200DK
 	bool "Atmel AT91RM9200-DK Development board"
 	depends on ARCH_AT91RM9200
 	help
-	  Select this if you are using Atmel's AT91RM9200-DK Development board
+	  Select this if you are using Atmel's AT91RM9200-DK Development board.
+	  (Discontinued)
+
 
 config MACH_AT91RM9200EK
 	bool "Atmel AT91RM9200-EK Evaluation Kit"
 	depends on ARCH_AT91RM9200
 	help
-	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit
+	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
 
 config MACH_CSB337
-	bool "Cogent CSB337 board"
+	bool "Cogent CSB337"
 	depends on ARCH_AT91RM9200
 	help
-	  Select this if you are using Cogent's CSB337 board
+	  Select this if you are using Cogent's CSB337 board.
+	  <http://www.cogcomp.com/csb_csb337.htm>
 
 config MACH_CSB637
-	bool "Cogent CSB637 board"
+	bool "Cogent CSB637"
 	depends on ARCH_AT91RM9200
 	help
-	  Select this if you are using Cogent's CSB637 board
+	  Select this if you are using Cogent's CSB637 board.
+	  <http://www.cogcomp.com/csb_csb637.htm>
 
 config MACH_CARMEVA
-	bool "Conitec's ARM&EVA"
+	bool "Conitec ARM&EVA"
 	depends on ARCH_AT91RM9200
 	help
-	  Select this if you are using Conitec's AT91RM9200-MCU-Module
+	  Select this if you are using Conitec's AT91RM9200-MCU-Module.
+	  <http://www.conitec.net/english/linuxboard.htm>
 
-config MACH_KB9200
-	bool "KwikByte's KB920x"
+config MACH_ATEB9200
+	bool "Embest ATEB9200"
 	depends on ARCH_AT91RM9200
 	help
-	  Select this if you are using KwikByte's KB920x board
+	  Select this if you are using Embest's ATEB9200 board.
+	  <http://www.embedinfo.com/english/product/ATEB9200.asp>
 
-config MACH_ATEB9200
-	bool "Embest's ATEB9200"
+config MACH_KB9200
+	bool "KwikByte KB920x"
 	depends on ARCH_AT91RM9200
 	help
-	  Select this if you are using Embest's ATEB9200 board
+	  Select this if you are using KwikByte's KB920x board.
+	  <http://kwikbyte.com/KB9202_description_new.htm>
 
 config MACH_KAFA
 	bool "Sperry-Sun KAFA board"
 	depends on ARCH_AT91RM9200
 	help
-	  Select this if you are using Sperry-Sun's KAFA board
+	  Select this if you are using Sperry-Sun's KAFA board.
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9260
+
+comment "AT91SAM9260 Board Type"
+
+endif
+
+# ----------------------------------------------------------
+
+if ARCH_AT91SAM9261
+
+comment "AT91SAM9261 Board Type"
+
+endif
+
 
+# ----------------------------------------------------------
 
-comment "AT91RM9200 Feature Selections"
+comment "AT91 Feature Selections"
 
 config AT91_PROGRAMMABLE_CLOCKS
 	bool "Programmable Clocks"

arch/arm/mach-at91rm9200/Makefile

@@ -2,14 +2,19 @@
 # Makefile for the linux kernel.
 #
 
-obj-y		:= clock.o irq.o time.o gpio.o common.o devices.o
+obj-y		:= clock.o irq.o gpio.o devices.o
 obj-m		:=
 obj-n		:=
 obj-		:=
 
 obj-$(CONFIG_PM)		+= pm.o
 
-# Board-specific support
+# CPU-specific support
+obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o
+obj-$(CONFIG_ARCH_AT91SAM9260)	+=
+obj-$(CONFIG_ARCH_AT91SAM9261)	+=
+
+# AT91RM9200 Board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
 obj-$(CONFIG_ARCH_AT91RM9200DK)	+= board-dk.o
 obj-$(CONFIG_MACH_AT91RM9200EK)	+= board-ek.o
@@ -20,6 +25,10 @@ obj-$(CONFIG_MACH_KB9200)	+= board-kb9202.o
 obj-$(CONFIG_MACH_ATEB9200)	+= board-eb9200.o
 obj-$(CONFIG_MACH_KAFA)		+= board-kafa.o
 
+# AT91SAM9260 board-specific support
+
+# AT91SAM9261 board-specific support
+
 # LEDs support
 led-$(CONFIG_ARCH_AT91RM9200DK)	+= leds.o
 led-$(CONFIG_MACH_AT91RM9200EK)	+= leds.o

arch/arm/mach-at91rm9200/common.c → arch/arm/mach-at91rm9200/at91rm9200.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-at91rm9200/common.c
+ * arch/arm/mach-at91rm9200/at91rm9200.c
  *
  *  Copyright (C) 2005 SAN People
  *

arch/arm/mach-at91rm9200/time.c → arch/arm/mach-at91rm9200/at91rm9200_time.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-at91rm9200/time.c
+ * linux/arch/arm/mach-at91rm9200/at91rm9200_time.c
  *
  *  Copyright (C) 2003 SAN People
  *  Copyright (C) 2003 ATMEL

arch/arm/mach-ep93xx/Kconfig

@@ -9,12 +9,24 @@ config CRUNCH
 
 comment "EP93xx Platforms"
 
+config MACH_EDB9302
+	bool "Support Cirrus Logic EDB9302"
+	help
+	  Say 'Y' here if you want your kernel to support the Cirrus
+	  Logic EDB9302 Evaluation Board.
+
 config MACH_EDB9315
 	bool "Support Cirrus Logic EDB9315"
 	help
 	  Say 'Y' here if you want your kernel to support the Cirrus
 	  Logic EDB9315 Evaluation Board.
 
+config MACH_EDB9315A
+	bool "Support Cirrus Logic EDB9315A"
+	help
+	  Say 'Y' here if you want your kernel to support the Cirrus
+	  Logic EDB9315A Evaluation Board.
+
 config MACH_GESBC9312
 	bool "Support Glomation GESBC-9312-sx"
 	help

arch/arm/mach-ep93xx/Makefile

@@ -6,6 +6,8 @@ obj-m			:=
 obj-n			:=
 obj-			:=
 
+obj-$(CONFIG_MACH_EDB9302)	+= edb9302.o
 obj-$(CONFIG_MACH_EDB9315)	+= edb9315.o
+obj-$(CONFIG_MACH_EDB9315A)	+= edb9315a.o
 obj-$(CONFIG_MACH_GESBC9312)	+= gesbc9312.o
 obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o

arch/arm/mach-ep93xx/edb9302.c

@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-ep93xx/edb9302.c
+ * Cirrus Logic EDB9302 support.
+ *
+ * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9302_flash_data = {
+	.width		= 2,
+};
+
+static struct resource edb9302_flash_resource = {
+	.start		= 0x60000000,
+	.end		= 0x60ffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device edb9302_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &edb9302_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &edb9302_flash_resource,
+};
+
+static void __init edb9302_init_machine(void)
+{
+	ep93xx_init_devices();
+	platform_device_register(&edb9302_flash);
+}
+
+MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
+	/* Maintainer: George Kashperko <george@chas.com.ua> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb9302_init_machine,
+MACHINE_END

arch/arm/mach-ep93xx/edb9315a.c

@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-ep93xx/edb9315a.c
+ * Cirrus Logic EDB9315A support.
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb9315a_flash_data = {
+	.width		= 2,
+};
+
+static struct resource edb9315a_flash_resource = {
+	.start		= 0x60000000,
+	.end		= 0x60ffffff,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device edb9315a_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &edb9315a_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &edb9315a_flash_resource,
+};
+
+static void __init edb9315a_init_machine(void)
+{
+	ep93xx_init_devices();
+	platform_device_register(&edb9315a_flash);
+}
+
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+	/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= edb9315a_init_machine,
+MACHINE_END

arch/arm/mach-iop3xx/Kconfig

@@ -30,12 +30,15 @@ config MACH_IQ80332
 	select ARCH_IOP331
 	help
 	  Say Y here if you want to run your kernel on the Intel IQ80332
-	  evaluation kit for the IOP332 chipset
+	  evaluation kit for the IOP332 chipset.
 
 config ARCH_EP80219
-    bool "Enable support for EP80219"
-    select ARCH_IOP321
-    select ARCH_IQ31244
+	bool "Enable support for EP80219"
+	select ARCH_IOP321
+	select ARCH_IQ31244
+	help
+	  Say Y here if you want to run your kernel on the Intel EP80219
+	  evaluation kit for the Intel 80219 chipset (a IOP321 variant).
 
 # Which IOP variant are we running?
 config ARCH_IOP321
@@ -56,8 +59,8 @@ config IOP331_STEPD
 	bool "Chip stepping D of the IOP80331 processor or IOP80333"
 	depends on (ARCH_IOP331)
 	help
-		  Say Y here if you have StepD of the IOP80331 or IOP8033
-		  based platforms.
+	  Say Y here if you have StepD of the IOP80331 or IOP8033
+	  based platforms.
 
 endmenu
 endif

arch/arm/mach-omap1/Kconfig

@@ -62,6 +62,13 @@ config MACH_OMAP_PERSEUS2
 	  Support for TI OMAP 730 Perseus2 board. Say Y here if you have such
 	  a board.
 
+config MACH_OMAP_FSAMPLE
+	bool "TI F-Sample"
+	depends on ARCH_OMAP1 && ARCH_OMAP730
+    	help
+	  Support for TI OMAP 850 F-Sample board. Say Y here if you have such
+	  a board.
+
 config MACH_VOICEBLUE
 	bool "Voiceblue"
 	depends on ARCH_OMAP1 && ARCH_OMAP15XX

arch/arm/mach-omap1/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o
 obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o
+obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o
 obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
 obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o
 obj-$(CONFIG_MACH_VOICEBLUE)		+= board-voiceblue.o

arch/arm/mach-omap1/board-ams-delta.c

@@ -80,8 +80,15 @@ static struct omap_uart_config ams_delta_uart_config __initdata = {
 	.enabled_uarts = 1,
 };
 
+static struct omap_usb_config ams_delta_usb_config __initdata = {
+	.register_host	= 1,
+	.hmc_mode	= 16,
+	.pins[0]	= 2,
+};
+
 static struct omap_board_config_kernel ams_delta_config[] = {
 	{ OMAP_TAG_UART,	&ams_delta_uart_config },
+	{ OMAP_TAG_USB,		&ams_delta_usb_config },
 };
 
 static struct platform_device ams_delta_led_device = {

arch/arm/mach-omap1/board-fsample.c

@@ -0,0 +1,319 @@
+/*
+ * linux/arch/arm/mach-omap1/board-fsample.c
+ *
+ * Modified from board-perseus2.c
+ *
+ * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
+ * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/input.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/tc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/fpga.h>
+#include <asm/arch/keypad.h>
+#include <asm/arch/common.h>
+#include <asm/arch/board.h>
+#include <asm/arch/board-fsample.h>
+
+static int fsample_keymap[] = {
+	KEY(0,0,KEY_UP),
+	KEY(0,1,KEY_RIGHT),
+	KEY(0,2,KEY_LEFT),
+	KEY(0,3,KEY_DOWN),
+	KEY(0,4,KEY_CENTER),
+	KEY(0,5,KEY_0_5),
+	KEY(1,0,KEY_SOFT2),
+	KEY(1,1,KEY_SEND),
+	KEY(1,2,KEY_END),
+	KEY(1,3,KEY_VOLUMEDOWN),
+	KEY(1,4,KEY_VOLUMEUP),
+	KEY(1,5,KEY_RECORD),
+	KEY(2,0,KEY_SOFT1),
+	KEY(2,1,KEY_3),
+	KEY(2,2,KEY_6),
+	KEY(2,3,KEY_9),
+	KEY(2,4,KEY_SHARP),
+	KEY(2,5,KEY_2_5),
+	KEY(3,0,KEY_BACK),
+	KEY(3,1,KEY_2),
+	KEY(3,2,KEY_5),
+	KEY(3,3,KEY_8),
+	KEY(3,4,KEY_0),
+	KEY(3,5,KEY_HEADSETHOOK),
+	KEY(4,0,KEY_HOME),
+	KEY(4,1,KEY_1),
+	KEY(4,2,KEY_4),
+	KEY(4,3,KEY_7),
+	KEY(4,4,KEY_STAR),
+	KEY(4,5,KEY_POWER),
+	0
+};
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
+		.end	= H2P2_DBG_FPGA_ETHR_START + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= INT_730_MPU_EXT_NIRQ,
+		.end	= 0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mtd_partition nor_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	{
+	      .name		= "bootloader",
+	      .offset		= 0,
+	      .size		= SZ_128K,
+	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next sector */
+	{
+	      .name		= "params",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_128K,
+	      .mask_flags	= 0,
+	},
+	/* kernel */
+	{
+	      .name		= "kernel",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= SZ_2M,
+	      .mask_flags	= 0
+	},
+	/* rest of flash is a file system */
+	{
+	      .name		= "rootfs",
+	      .offset		= MTDPART_OFS_APPEND,
+	      .size		= MTDPART_SIZ_FULL,
+	      .mask_flags	= 0
+	},
+};
+
+static struct flash_platform_data nor_data = {
+	.map_name	= "cfi_probe",
+	.width		= 2,
+	.parts		= nor_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_partitions),
+};
+
+static struct resource nor_resource = {
+	.start		= OMAP_CS0_PHYS,
+	.end		= OMAP_CS0_PHYS + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device nor_device = {
+	.name		= "omapflash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &nor_data,
+	},
+	.num_resources	= 1,
+	.resource	= &nor_resource,
+};
+
+static struct nand_platform_data nand_data = {
+	.options	= NAND_SAMSUNG_LP_OPTIONS,
+};
+
+static struct resource nand_resource = {
+	.start		= OMAP_CS3_PHYS,
+	.end		= OMAP_CS3_PHYS + SZ_4K - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device nand_device = {
+	.name		= "omapnand",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &nand_resource,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct resource kp_resources[] = {
+	[0] = {
+		.start	= INT_730_MPUIO_KEYPAD,
+		.end	= INT_730_MPUIO_KEYPAD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct omap_kp_platform_data kp_data = {
+	.rows	= 8,
+	.cols	= 8,
+	.keymap = fsample_keymap,
+};
+
+static struct platform_device kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(kp_resources),
+	.resource	= kp_resources,
+};
+
+static struct platform_device lcd_device = {
+	.name		= "lcd_p2",
+	.id		= -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&nor_device,
+	&nand_device,
+	&smc91x_device,
+	&kp_device,
+	&lcd_device,
+};
+
+#define P2_NAND_RB_GPIO_PIN	62
+
+static int nand_dev_ready(struct nand_platform_data *data)
+{
+	return omap_get_gpio_datain(P2_NAND_RB_GPIO_PIN);
+}
+
+static struct omap_uart_config fsample_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1)),
+};
+
+static struct omap_lcd_config fsample_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel fsample_config[] = {
+	{ OMAP_TAG_UART,	&fsample_uart_config },
+	{ OMAP_TAG_LCD,		&fsample_lcd_config },
+};
+
+static void __init omap_fsample_init(void)
+{
+	if (!(omap_request_gpio(P2_NAND_RB_GPIO_PIN)))
+		nand_data.dev_ready = nand_dev_ready;
+
+	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
+	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	omap_board_config = fsample_config;
+	omap_board_config_size = ARRAY_SIZE(fsample_config);
+	omap_serial_init();
+}
+
+static void __init fsample_init_smc91x(void)
+{
+	fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+	fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+		   H2P2_DBG_FPGA_LAN_RESET);
+	mdelay(50);
+}
+
+void omap_fsample_init_irq(void)
+{
+	omap1_init_common_hw();
+	omap_init_irq();
+	omap_gpio_init();
+	fsample_init_smc91x();
+}
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc omap_fsample_io_desc[] __initdata = {
+	{
+		.virtual	= H2P2_DBG_FPGA_BASE,
+		.pfn		= __phys_to_pfn(H2P2_DBG_FPGA_START),
+		.length		= H2P2_DBG_FPGA_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= FSAMPLE_CPLD_BASE,
+		.pfn		= __phys_to_pfn(FSAMPLE_CPLD_START),
+		.length		= FSAMPLE_CPLD_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init omap_fsample_map_io(void)
+{
+	omap1_map_common_io();
+	iotable_init(omap_fsample_io_desc,
+		     ARRAY_SIZE(omap_fsample_io_desc));
+
+	/* Early, board-dependent init */
+
+	/*
+	 * Hold GSM Reset until needed
+	 */
+	omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+
+	/*
+	 * UARTs -> done automagically by 8250 driver
+	 */
+
+	/*
+	 * CSx timings, GPIO Mux ... setup
+	 */
+
+	/* Flash: CS0 timings setup */
+	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+
+	/*
+	 * Ethernet support through the debug board
+	 * CS1 timings setup
+	 */
+	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+
+	/*
+	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+	 * It is used as the Ethernet controller interrupt
+	 */
+	omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+}
+
+MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
+/* Maintainer: Brian Swetland <swetland@google.com> */
+	.phys_io	= 0xfff00000,
+	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.map_io		= omap_fsample_map_io,
+	.init_irq	= omap_fsample_init_irq,
+	.init_machine	= omap_fsample_init,
+	.timer		= &omap_timer,
+MACHINE_END

arch/arm/mach-omap1/board-innovator.c

@@ -37,6 +37,8 @@
 #include <asm/arch/usb.h>
 #include <asm/arch/keypad.h>
 #include <asm/arch/common.h>
+#include <asm/arch/mcbsp.h>
+#include <asm/arch/omap-alsa.h>
 
 static int innovator_keymap[] = {
 	KEY(0, 0, KEY_F1),
@@ -112,6 +114,42 @@ static struct platform_device innovator_flash_device = {
 	.resource	= &innovator_flash_resource,
 };
 
+#define DEFAULT_BITPERSAMPLE 16
+
+static struct omap_mcbsp_reg_cfg mcbsp_regs = {
+	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
+	.spcr1 = RINTM(3) | RRST,
+	.rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
+	    RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
+	.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
+	.xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
+	    XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
+	.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
+	.srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
+	.srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
+	/*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
+	.pcr0 = CLKXP | CLKRP,  /* mcbsp: slave */
+};
+
+static struct omap_alsa_codec_config alsa_config = {
+	.name			= "OMAP Innovator AIC23",
+	.mcbsp_regs_alsa	= &mcbsp_regs,
+	.codec_configure_dev	= NULL, // aic23_configure,
+	.codec_set_samplerate	= NULL, // aic23_set_samplerate,
+	.codec_clock_setup	= NULL, // aic23_clock_setup,
+	.codec_clock_on		= NULL, // aic23_clock_on,
+	.codec_clock_off	= NULL, // aic23_clock_off,
+	.get_default_samplerate	= NULL, // aic23_get_default_samplerate,
+};
+
+static struct platform_device innovator_mcbsp1_device = {
+	.name	= "omap_alsa_mcbsp",
+ 	.id	= 1,
+	.dev = {
+		.platform_data	= &alsa_config,
+	},
+};
+
 static struct resource innovator_kp_resources[] = {
 	[0] = {
 		.start	= INT_KEYBOARD,
@@ -139,6 +177,10 @@ static struct platform_device innovator_kp_device = {
 
 #ifdef CONFIG_ARCH_OMAP15XX
 
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc innovator1510_io_desc[] __initdata = {
 	{
@@ -174,13 +216,44 @@ static struct platform_device innovator1510_lcd_device = {
 	.id		= -1,
 };
 
+static struct platform_device innovator1510_spi_device = {
+	.name		= "spi_inn1510",
+	.id		= -1,
+};
+
 static struct platform_device *innovator1510_devices[] __initdata = {
 	&innovator_flash_device,
 	&innovator1510_smc91x_device,
+	&innovator_mcbsp1_device,
 	&innovator_kp_device,
 	&innovator1510_lcd_device,
+	&innovator1510_spi_device,
 };
 
+static int innovator_get_pendown_state(void)
+{
+	return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
+}
+
+static const struct ads7846_platform_data innovator1510_ts_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.get_pendown_state	= innovator_get_pendown_state,
+};
+
+static struct spi_board_info __initdata innovator1510_boardinfo[] = { {
+	/* FPGA (bus "10") CS0 has an ads7846e */
+	.modalias		= "ads7846",
+	.platform_data		= &innovator1510_ts_info,
+	.irq			= OMAP1510_INT_FPGA_TS,
+	.max_speed_hz		= 120000 /* max sample rate at 3V */
+					* 26 /* command + data + overhead */,
+	.bus_num		= 10,
+	.chip_select		= 0,
+} };
+
 #endif /* CONFIG_ARCH_OMAP15XX */
 
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -311,6 +384,8 @@ static void __init innovator_init(void)
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
 		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
+		spi_register_board_info(innovator1510_boardinfo,
+				ARRAY_SIZE(innovator1510_boardinfo));
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP16XX

arch/arm/mach-omap1/board-osk.c

@@ -33,7 +33,6 @@
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/input.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -45,25 +44,10 @@
 #include <asm/arch/usb.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/tc.h>
-#include <asm/arch/keypad.h>
 #include <asm/arch/common.h>
 #include <asm/arch/mcbsp.h>
 #include <asm/arch/omap-alsa.h>
 
-static int osk_keymap[] = {
-	KEY(0, 0, KEY_F1),
-	KEY(0, 3, KEY_UP),
-	KEY(1, 1, KEY_LEFTCTRL),
-	KEY(1, 2, KEY_LEFT),
-	KEY(2, 0, KEY_SPACE),
-	KEY(2, 1, KEY_ESC),
-	KEY(2, 2, KEY_DOWN),
-	KEY(3, 2, KEY_ENTER),
-	KEY(3, 3, KEY_RIGHT),
-	0
-};
-
-
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -181,48 +165,17 @@ static struct omap_alsa_codec_config alsa_config = {
 
 static struct platform_device osk5912_mcbsp1_device = {
 	.name	= "omap_alsa_mcbsp",
- 	.id	= 1,
+	.id	= 1,
 	.dev = {
 		.platform_data	= &alsa_config,
 	},
 };
 
-static struct resource osk5912_kp_resources[] = {
-	[0] = {
-		.start	= INT_KEYBOARD,
-		.end	= INT_KEYBOARD,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct omap_kp_platform_data osk_kp_data = {
-	.rows	= 8,
-	.cols	= 8,
-	.keymap = osk_keymap,
-};
-
-static struct platform_device osk5912_kp_device = {
-	.name		= "omap-keypad",
-	.id		= -1,
-	.dev		= {
-		.platform_data = &osk_kp_data,
-	},
-	.num_resources	= ARRAY_SIZE(osk5912_kp_resources),
-	.resource	= osk5912_kp_resources,
-};
-
-static struct platform_device osk5912_lcd_device = {
-	.name		= "lcd_osk",
-	.id		= -1,
-};
-
 static struct platform_device *osk5912_devices[] __initdata = {
 	&osk5912_flash_device,
 	&osk5912_smc91x_device,
 	&osk5912_cf_device,
 	&osk5912_mcbsp1_device,
-	&osk5912_kp_device,
-	&osk5912_lcd_device,
 };
 
 static void __init osk_init_smc91x(void)
@@ -276,18 +229,100 @@ static struct omap_uart_config osk_uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
 
+#ifdef	CONFIG_OMAP_OSK_MISTRAL
 static struct omap_lcd_config osk_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
+#endif
 
 static struct omap_board_config_kernel osk_config[] = {
 	{ OMAP_TAG_USB,           &osk_usb_config },
 	{ OMAP_TAG_UART,		&osk_uart_config },
+#ifdef	CONFIG_OMAP_OSK_MISTRAL
 	{ OMAP_TAG_LCD,			&osk_lcd_config },
+#endif
 };
 
 #ifdef	CONFIG_OMAP_OSK_MISTRAL
 
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <asm/arch/keypad.h>
+
+static const int osk_keymap[] = {
+	/* KEY(col, row, code) */
+	KEY(0, 0, KEY_F1),		/* SW4 */
+	KEY(0, 3, KEY_UP),		/* (sw2/up) */
+	KEY(1, 1, KEY_LEFTCTRL),	/* SW5 */
+	KEY(1, 2, KEY_LEFT),		/* (sw2/left) */
+	KEY(2, 0, KEY_SPACE),		/* SW3 */
+	KEY(2, 1, KEY_ESC),		/* SW6 */
+	KEY(2, 2, KEY_DOWN),		/* (sw2/down) */
+	KEY(3, 2, KEY_ENTER),		/* (sw2/select) */
+	KEY(3, 3, KEY_RIGHT),		/* (sw2/right) */
+	0
+};
+
+static struct omap_kp_platform_data osk_kp_data = {
+	.rows	= 8,
+	.cols	= 8,
+	.keymap = (int *) osk_keymap,
+};
+
+static struct resource osk5912_kp_resources[] = {
+	[0] = {
+		.start	= INT_KEYBOARD,
+		.end	= INT_KEYBOARD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device osk5912_kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &osk_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(osk5912_kp_resources),
+	.resource	= osk5912_kp_resources,
+};
+
+static struct platform_device osk5912_lcd_device = {
+	.name		= "lcd_osk",
+	.id		= -1,
+};
+
+static struct platform_device *mistral_devices[] __initdata = {
+	&osk5912_kp_device,
+	&osk5912_lcd_device,
+};
+
+static int mistral_get_pendown_state(void)
+{
+	return !omap_get_gpio_datain(4);
+}
+
+static const struct ads7846_platform_data mistral_ts_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.get_pendown_state	= mistral_get_pendown_state,
+};
+
+static struct spi_board_info __initdata mistral_boardinfo[] = { {
+	/* MicroWire (bus 2) CS0 has an ads7846e */
+	.modalias		= "ads7846",
+	.platform_data		= &mistral_ts_info,
+	.irq			= OMAP_GPIO_IRQ(4),
+	.max_speed_hz		= 120000 /* max sample rate at 3V */
+					* 26 /* command + data + overhead */,
+	.bus_num		= 2,
+	.chip_select		= 0,
+} };
+
 #ifdef	CONFIG_PM
 static irqreturn_t
 osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs)
@@ -298,14 +333,18 @@ osk_mistral_wake_interrupt(int irq, void *ignored, struct pt_regs *regs)
 
 static void __init osk_mistral_init(void)
 {
-	/* FIXME here's where to feed in framebuffer, touchpad, and
-	 * keyboard setup ...  not in the drivers for those devices!
-	 *
-	 * NOTE:  we could actually tell if there's a Mistral board
+	/* NOTE:  we could actually tell if there's a Mistral board
 	 * attached, e.g. by trying to read something from the ads7846.
-	 * But this is too early for that...
+	 * But this arch_init() code is too early for that, since we
+	 * can't talk to the ads or even the i2c eeprom.
 	 */
 
+	// omap_cfg_reg(P19_1610_GPIO6);	// BUSY
+	omap_cfg_reg(P20_1610_GPIO4);	// PENIRQ
+	set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
+	spi_register_board_info(mistral_boardinfo,
+			ARRAY_SIZE(mistral_boardinfo));
+
 	/* the sideways button (SW1) is for use as a "wakeup" button */
 	omap_cfg_reg(N15_1610_MPUIO2);
 	if (omap_request_gpio(OMAP_MPUIO(2)) == 0) {
@@ -329,6 +368,8 @@ static void __init osk_mistral_init(void)
 #endif
 	} else
 		printk(KERN_ERR "OSK+Mistral: wakeup button is awol\n");
+
+	platform_add_devices(mistral_devices, ARRAY_SIZE(mistral_devices));
 }
 #else
 static void __init osk_mistral_init(void) { }

arch/arm/mach-omap1/clock.c

@@ -1,3 +1,4 @@
+//kernel/linux-omap-fsample/arch/arm/mach-omap1/clock.c#2 - edit change 3808 (text)
 /*
  *  linux/arch/arm/mach-omap1/clock.c
  *
@@ -20,6 +21,7 @@
 
 #include <asm/io.h>
 
+#include <asm/arch/cpu.h>
 #include <asm/arch/usb.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
@@ -270,8 +272,12 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
 	/*
 	 * In most cases we should not need to reprogram DPLL.
 	 * Reprogramming the DPLL is tricky, it must be done from SRAM.
+	 * (on 730, bit 13 must always be 1)
 	 */
-	omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
+	if (cpu_is_omap730())
+		omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
+	else
+		omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
 
 	ck_dpll1.rate = ptr->pll_rate;
 	propagate_rate(&ck_dpll1);
@@ -748,7 +754,7 @@ int __init omap1_clk_init(void)
 		printk(KERN_ERR "System frequencies not set. Check your config.\n");
 		/* Guess sane values (60MHz) */
 		omap_writew(0x2290, DPLL_CTL);
-		omap_writew(0x1005, ARM_CKCTL);
+		omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
 		ck_dpll1.rate = 60000000;
 		propagate_rate(&ck_dpll1);
 	}
@@ -761,13 +767,17 @@ int __init omap1_clk_init(void)
 	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
 	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
 
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
 	/* Select slicer output as OMAP input clock */
 	omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
 #endif
 
 	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
-	omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
+	/* (on 730, bit 13 must not be cleared) */
+	if (cpu_is_omap730())
+		omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
+	else
+		omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
 
 	/* Put DSP/MPUI into reset until needed */
 	omap_writew(0, ARM_RSTCT1);

arch/arm/mach-omap1/pm.c

@@ -1,3 +1,4 @@
+//kernel/linux-omap-fsample/arch/arm/mach-omap1/pm.c#3 - integrate change 4545 (text)
 /*
  * linux/arch/arm/mach-omap1/pm.c
  *
@@ -50,6 +51,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach-types.h>
 
+#include <asm/arch/cpu.h>
 #include <asm/arch/irqs.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
@@ -326,8 +328,9 @@ void omap_pm_suspend(void)
 	/* stop DSP */
 	omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
 
-	/* shut down dsp_ck */
-	omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
+		/* shut down dsp_ck */
+	if (!cpu_is_omap730())
+		omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
 
 	/* temporarily enabling api_ck to access DSP registers */
 	omap_writew(omap_readw(ARM_IDLECT2) | 1 << EN_APICK, ARM_IDLECT2);

arch/arm/mach-omap1/time.c

@@ -93,7 +93,7 @@ static inline unsigned long long cycles_2_ns(unsigned long long cyc)
  * will break. On P2, the timer count rate is 6.5 MHz after programming PTV
  * with 0. This divides the 13MHz input by 2, and is undocumented.
  */
-#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
 /* REVISIT: This ifdef construct should be replaced by a query to clock
  * framework to see if timer base frequency is 12.0, 13.0 or 19.2 MHz.
  */

arch/arm/mach-omap2/Kconfig

@@ -8,6 +8,7 @@ config ARCH_OMAP24XX
 config ARCH_OMAP2420
 	bool "OMAP2420 support"
 	depends on ARCH_OMAP24XX
+	select OMAP_DM_TIMER
 
 comment "OMAP Board Type"
 	depends on ARCH_OMAP2

arch/arm/mach-omap2/Makefile

@@ -3,12 +3,13 @@
 #
 
 # Common support
-obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o serial.o
+obj-y := irq.o id.o io.o sram-fn.o memory.o prcm.o clock.o mux.o devices.o \
+	 serial.o gpmc.o
 
 obj-$(CONFIG_OMAP_MPU_TIMER)		+= timer-gp.o
 
 # Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o
+obj-$(CONFIG_PM) += pm.o pm-domain.o sleep.o
 
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o

arch/arm/mach-omap2/clock.c

@@ -659,26 +659,35 @@ static int omap2_clk_set_rate(struct clk *clk, unsigned long rate)
 
 		/* Isolate control register */
 		div_sel = (SRC_RATE_SEL_MASK & clk->flags);
-		div_off = clk->src_offset;
+		div_off = clk->rate_offset;
 
 		validrate = omap2_clksel_round_rate(clk, rate, &new_div);
-		if(validrate != rate)
+		if (validrate != rate)
 			return(ret);
 
 		field_val = omap2_get_clksel(&div_sel, &field_mask, clk);
 		if (div_sel == 0)
 			return ret;
 
-		if(clk->flags & CM_SYSCLKOUT_SEL1){
-			switch(new_div){
-			case 16: field_val = 4; break;
-			case 8:  field_val = 3; break;
-			case 4:  field_val = 2; break;
-			case 2:  field_val = 1; break;
-			case 1:  field_val = 0; break;
+		if (clk->flags & CM_SYSCLKOUT_SEL1) {
+			switch (new_div) {
+			case 16:
+				field_val = 4;
+				break;
+			case 8:
+				field_val = 3;
+				break;
+			case 4:
+				field_val = 2;
+				break;
+			case 2:
+				field_val = 1;
+				break;
+			case 1:
+				field_val = 0;
+				break;
 			}
-		}
-		else
+		} else
 			field_val = new_div;
 
 		reg = (void __iomem *)div_sel;
@@ -743,7 +752,7 @@ static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
 			val = 0x2;
 		break;
 	case CM_WKUP_SEL1:
-		src_reg_addr = (u32)&CM_CLKSEL2_CORE;
+		src_reg_addr = (u32)&CM_CLKSEL_WKUP;
 		mask = 0x3;
 		if (src_clk == &func_32k_ck)
 			val = 0x0;
@@ -783,9 +792,9 @@ static u32 omap2_get_src_field(u32 *type_to_addr, u32 reg_offset,
 			val = 0;
 		if (src_clk == &sys_ck)
 			val = 1;
-		if (src_clk == &func_54m_ck)
-			val = 2;
 		if (src_clk == &func_96m_ck)
+			val = 2;
+		if (src_clk == &func_54m_ck)
 			val = 3;
 		break;
 	}

arch/arm/mach-omap2/clock.h

@@ -1062,7 +1062,7 @@ static struct clk gpt2_ick = {
 	.parent		= &l4_ck,
 	.flags		= CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
 	.enable_reg	= (void __iomem *)&CM_ICLKEN1_CORE,	/* Bit4 */
-	.enable_bit	= 0,
+	.enable_bit	= 4,
 	.recalc		= &omap2_followparent_recalc,
 };
 

arch/arm/mach-omap2/devices.c

@@ -104,6 +104,51 @@ static inline void omap_init_sti(void)
 static inline void omap_init_sti(void) {}
 #endif
 
+#if defined(CONFIG_SPI_OMAP24XX)
+
+#include <asm/arch/mcspi.h>
+
+#define OMAP2_MCSPI1_BASE		0x48098000
+#define OMAP2_MCSPI2_BASE		0x4809a000
+
+/* FIXME: use resources instead */
+
+static struct omap2_mcspi_platform_config omap2_mcspi1_config = {
+	.base		= io_p2v(OMAP2_MCSPI1_BASE),
+	.num_cs		= 4,
+};
+
+struct platform_device omap2_mcspi1 = {
+	.name		= "omap2_mcspi",
+	.id		= 1,
+	.dev		= {
+		.platform_data = &omap2_mcspi1_config,
+	},
+};
+
+static struct omap2_mcspi_platform_config omap2_mcspi2_config = {
+	.base		= io_p2v(OMAP2_MCSPI2_BASE),
+	.num_cs		= 2,
+};
+
+struct platform_device omap2_mcspi2 = {
+	.name		= "omap2_mcspi",
+	.id		= 2,
+	.dev		= {
+		.platform_data = &omap2_mcspi2_config,
+	},
+};
+
+static void omap_init_mcspi(void)
+{
+	platform_device_register(&omap2_mcspi1);
+	platform_device_register(&omap2_mcspi2);
+}
+
+#else
+static inline void omap_init_mcspi(void) {}
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 static int __init omap2_init_devices(void)
@@ -112,6 +157,7 @@ static int __init omap2_init_devices(void)
 	 * in alphabetical order so they're easier to sort through.
 	 */
 	omap_init_i2c();
+	omap_init_mcspi();
 	omap_init_sti();
 
 	return 0;

arch/arm/mach-omap2/gpmc.c

@@ -0,0 +1,209 @@
+/*
+ * GPMC support functions
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+#include <asm/arch/gpmc.h>
+
+#undef DEBUG
+
+#define GPMC_BASE		0x6800a000
+#define GPMC_REVISION		0x00
+#define GPMC_SYSCONFIG		0x10
+#define GPMC_SYSSTATUS		0x14
+#define GPMC_IRQSTATUS		0x18
+#define GPMC_IRQENABLE		0x1c
+#define GPMC_TIMEOUT_CONTROL	0x40
+#define GPMC_ERR_ADDRESS	0x44
+#define GPMC_ERR_TYPE		0x48
+#define GPMC_CONFIG		0x50
+#define GPMC_STATUS		0x54
+#define GPMC_PREFETCH_CONFIG1	0x1e0
+#define GPMC_PREFETCH_CONFIG2	0x1e4
+#define GPMC_PREFETCH_CONTROL	0x1e8
+#define GPMC_PREFETCH_STATUS	0x1f0
+#define GPMC_ECC_CONFIG		0x1f4
+#define GPMC_ECC_CONTROL	0x1f8
+#define GPMC_ECC_SIZE_CONFIG	0x1fc
+
+#define GPMC_CS0		0x60
+#define GPMC_CS_SIZE		0x30
+
+static void __iomem *gpmc_base =
+	(void __iomem *) IO_ADDRESS(GPMC_BASE);
+static void __iomem *gpmc_cs_base =
+	(void __iomem *) IO_ADDRESS(GPMC_BASE) + GPMC_CS0;
+
+static struct clk *gpmc_l3_clk;
+
+static void gpmc_write_reg(int idx, u32 val)
+{
+	__raw_writel(val, gpmc_base + idx);
+}
+
+static u32 gpmc_read_reg(int idx)
+{
+	return __raw_readl(gpmc_base + idx);
+}
+
+void gpmc_cs_write_reg(int cs, int idx, u32 val)
+{
+	void __iomem *reg_addr;
+
+	reg_addr = gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx;
+	__raw_writel(val, reg_addr);
+}
+
+u32 gpmc_cs_read_reg(int cs, int idx)
+{
+	return __raw_readl(gpmc_cs_base + (cs * GPMC_CS_SIZE) + idx);
+}
+
+/* TODO: Add support for gpmc_fck to clock framework and use it */
+static unsigned long gpmc_get_fclk_period(void)
+{
+	/* In picoseconds */
+	return 1000000000 / ((clk_get_rate(gpmc_l3_clk)) / 1000);
+}
+
+unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
+{
+	unsigned long tick_ps;
+
+	/* Calculate in picosecs to yield more exact results */
+	tick_ps = gpmc_get_fclk_period();
+
+	return (time_ns * 1000 + tick_ps - 1) / tick_ps;
+}
+
+#ifdef DEBUG
+static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
+			       int time, const char *name)
+#else
+static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
+			       int time)
+#endif
+{
+	u32 l;
+	int ticks, mask, nr_bits;
+
+	if (time == 0)
+		ticks = 0;
+	else
+		ticks = gpmc_ns_to_ticks(time);
+	nr_bits = end_bit - st_bit + 1;
+	if (ticks >= 1 << nr_bits)
+		return -1;
+
+	mask = (1 << nr_bits) - 1;
+	l = gpmc_cs_read_reg(cs, reg);
+#ifdef DEBUG
+	printk(KERN_INFO "GPMC CS%d: %-10s: %d ticks, %3lu ns (was %i ticks)\n",
+	       cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000,
+	       (l >> st_bit) & mask);
+#endif
+	l &= ~(mask << st_bit);
+	l |= ticks << st_bit;
+	gpmc_cs_write_reg(cs, reg, l);
+
+	return 0;
+}
+
+#ifdef DEBUG
+#define GPMC_SET_ONE(reg, st, end, field) \
+	if (set_gpmc_timing_reg(cs, (reg), (st), (end),		\
+			t->field, #field) < 0)			\
+		return -1
+#else
+#define GPMC_SET_ONE(reg, st, end, field) \
+	if (set_gpmc_timing_reg(cs, (reg), (st), (end), t->field) < 0) \
+		return -1
+#endif
+
+int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
+{
+	int div;
+	u32 l;
+
+	l = sync_clk * 1000 + (gpmc_get_fclk_period() - 1);
+	div = l / gpmc_get_fclk_period();
+	if (div > 4)
+		return -1;
+	if (div < 0)
+		div = 1;
+
+	return div;
+}
+
+int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
+{
+	int div;
+	u32 l;
+
+	div = gpmc_cs_calc_divider(cs, t->sync_clk);
+	if (div < 0)
+		return -1;
+
+	GPMC_SET_ONE(GPMC_CS_CONFIG2,  0,  3, cs_on);
+	GPMC_SET_ONE(GPMC_CS_CONFIG2,  8, 12, cs_rd_off);
+	GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off);
+
+	GPMC_SET_ONE(GPMC_CS_CONFIG3,  0,  3, adv_on);
+	GPMC_SET_ONE(GPMC_CS_CONFIG3,  8, 12, adv_rd_off);
+	GPMC_SET_ONE(GPMC_CS_CONFIG3, 16, 20, adv_wr_off);
+
+	GPMC_SET_ONE(GPMC_CS_CONFIG4,  0,  3, oe_on);
+	GPMC_SET_ONE(GPMC_CS_CONFIG4,  8, 12, oe_off);
+	GPMC_SET_ONE(GPMC_CS_CONFIG4, 16, 19, we_on);
+	GPMC_SET_ONE(GPMC_CS_CONFIG4, 24, 28, we_off);
+
+	GPMC_SET_ONE(GPMC_CS_CONFIG5,  0,  4, rd_cycle);
+	GPMC_SET_ONE(GPMC_CS_CONFIG5,  8, 12, wr_cycle);
+	GPMC_SET_ONE(GPMC_CS_CONFIG5, 16, 20, access);
+
+	GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
+
+#ifdef DEBUG
+	printk(KERN_INFO "GPMC CS%d CLK period is %lu (div %d)\n",
+	       cs, gpmc_get_fclk_period(), div);
+#endif
+
+	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+	l &= ~0x03;
+	l |= (div - 1);
+
+	return 0;
+}
+
+unsigned long gpmc_cs_get_base_addr(int cs)
+{
+	return (gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7) & 0x1f) << 24;
+}
+
+void __init gpmc_init(void)
+{
+	u32 l;
+
+	gpmc_l3_clk = clk_get(NULL, "core_l3_ck");
+	BUG_ON(IS_ERR(gpmc_l3_clk));
+
+	l = gpmc_read_reg(GPMC_REVISION);
+	printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+	/* Set smart idle mode and automatic L3 clock gating */
+	l = gpmc_read_reg(GPMC_SYSCONFIG);
+	l &= 0x03 << 3;
+	l |= (0x02 << 3) | (1 << 0);
+	gpmc_write_reg(GPMC_SYSCONFIG, l);
+}

arch/arm/mach-omap2/io.c

@@ -26,6 +26,7 @@
 extern void omap_sram_init(void);
 extern int omap2_clk_init(void);
 extern void omap2_check_revision(void);
+extern void gpmc_init(void);
 
 /*
  * The machine specific code may provide the extra mapping besides the
@@ -66,4 +67,5 @@ void __init omap2_init_common_hw(void)
 {
 	omap2_mux_init();
 	omap2_clk_init();
+	gpmc_init();
 }

arch/arm/mach-omap2/mux.c

@@ -52,6 +52,12 @@ MUX_CFG_24XX("W19_24XX_SYS_NIRQ",	0x12c,	0,	1,	1,	1)
 /* 24xx clocks */
 MUX_CFG_24XX("W14_24XX_SYS_CLKOUT",	0x137,	0,	1,	1,	1)
 
+/* 24xx GPMC wait pin monitoring */
+MUX_CFG_24XX("L3_GPMC_WAIT0",		0x09a,	0,	1,	1,	1)
+MUX_CFG_24XX("N7_GPMC_WAIT1",		0x09b,	0,	1,	1,	1)
+MUX_CFG_24XX("M1_GPMC_WAIT2",		0x09c,	0,	1,	1,	1)
+MUX_CFG_24XX("P1_GPMC_WAIT3",		0x09d,	0,	1,	1,	1)
+
 /* 24xx McBSP */
 MUX_CFG_24XX("Y15_24XX_MCBSP2_CLKX",	0x124,	1,	1,	0,	1)
 MUX_CFG_24XX("R14_24XX_MCBSP2_FSX",	0x125,	1,	1,	0,	1)
@@ -59,18 +65,38 @@ MUX_CFG_24XX("W15_24XX_MCBSP2_DR",	0x126,	1,	1,	0,	1)
 MUX_CFG_24XX("V15_24XX_MCBSP2_DX",	0x127,	1,	1,	0,	1)
 
 /* 24xx GPIO */
-MUX_CFG_24XX("M21_242X_GPIO11",	 0x0c9,  3,      1,      1,      1)
+MUX_CFG_24XX("M21_242X_GPIO11",		0x0c9,  3,      1,      1,      1)
 MUX_CFG_24XX("AA10_242X_GPIO13",	0x0e5,  3,      0,      0,      1)
-MUX_CFG_24XX("AA6_242X_GPIO14",	 0x0e6,  3,      0,      0,      1)
-MUX_CFG_24XX("AA4_242X_GPIO15",	 0x0e7,  3,      0,      0,      1)
-MUX_CFG_24XX("Y11_242X_GPIO16",	 0x0e8,  3,      0,      0,      1)
+MUX_CFG_24XX("AA6_242X_GPIO14",		0x0e6,  3,      0,      0,      1)
+MUX_CFG_24XX("AA4_242X_GPIO15",		0x0e7,  3,      0,      0,      1)
+MUX_CFG_24XX("Y11_242X_GPIO16",		0x0e8,  3,      0,      0,      1)
 MUX_CFG_24XX("AA12_242X_GPIO17",	0x0e9,  3,      0,      0,      1)
-MUX_CFG_24XX("AA8_242X_GPIO58",	 0x0ea,  3,      0,      0,      1)
+MUX_CFG_24XX("AA8_242X_GPIO58",		0x0ea,  3,      0,      0,      1)
 MUX_CFG_24XX("Y20_24XX_GPIO60",		0x12c,	3,	0,	0,	1)
-MUX_CFG_24XX("W4__24XX_GPIO74",	 0x0f2,  3,      0,      0,      1)
+MUX_CFG_24XX("W4__24XX_GPIO74",		0x0f2,  3,      0,      0,      1)
 MUX_CFG_24XX("M15_24XX_GPIO92",		0x10a,	3,	0,	0,	1)
 MUX_CFG_24XX("V14_24XX_GPIO117",	0x128,	3,	1,	0,	1)
 
+/* 242x DBG GPIO */
+MUX_CFG_24XX("V4_242X_GPIO49",		0xd3,	3,	0,	0,	1)
+MUX_CFG_24XX("W2_242X_GPIO50",		0xd4,	3,	0,	0,	1)
+MUX_CFG_24XX("U4_242X_GPIO51",		0xd5,	3,	0,	0,	1)
+MUX_CFG_24XX("V3_242X_GPIO52",		0xd6,	3,	0,	0,	1)
+MUX_CFG_24XX("V2_242X_GPIO53",		0xd7,	3,	0,	0,	1)
+MUX_CFG_24XX("V6_242X_GPIO53",		0xcf,	3,	0,	0,	1)
+MUX_CFG_24XX("T4_242X_GPIO54",		0xd8,	3,	0,	0,	1)
+MUX_CFG_24XX("Y4_242X_GPIO54",		0xd0,	3,	0,	0,	1)
+MUX_CFG_24XX("T3_242X_GPIO55",		0xd9,	3,	0,	0,	1)
+MUX_CFG_24XX("U2_242X_GPIO56",		0xda,	3,	0,	0,	1)
+
+/* 24xx external DMA requests */
+MUX_CFG_24XX("AA10_242X_DMAREQ0",	0x0e5,  2,      0,      0,      1)
+MUX_CFG_24XX("AA6_242X_DMAREQ1",	0x0e6,  2,      0,      0,      1)
+MUX_CFG_24XX("E4_242X_DMAREQ2",		0x074,  2,      0,      0,      1)
+MUX_CFG_24XX("G4_242X_DMAREQ3",		0x073,  2,      0,      0,      1)
+MUX_CFG_24XX("D3_242X_DMAREQ4",		0x072,  2,      0,      0,      1)
+MUX_CFG_24XX("E3_242X_DMAREQ5",		0x071,  2,      0,      0,      1)
+
 /* TSC IRQ */
 MUX_CFG_24XX("P20_24XX_TSC_IRQ",	0x108,	0,	0,	0,	1)
 

arch/arm/mach-omap2/pm-domain.c

@@ -0,0 +1,300 @@
+/*
+ * linux/arch/arm/mach-omap2/pm-domain.c
+ *
+ * Power domain functions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * Some code based on earlier OMAP2 sample PM code
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+
+#include <asm/io.h>
+
+#include "prcm-regs.h"
+
+/* Power domain offsets */
+#define PM_MPU_OFFSET			0x100
+#define PM_CORE_OFFSET			0x200
+#define PM_GFX_OFFSET			0x300
+#define PM_WKUP_OFFSET			0x400		/* Autoidle only */
+#define PM_PLL_OFFSET			0x500		/* Autoidle only */
+#define PM_DSP_OFFSET			0x800
+#define PM_MDM_OFFSET			0xc00
+
+/* Power domain wake-up dependency control register */
+#define PM_WKDEP_OFFSET			0xc8
+#define		EN_MDM			(1 << 5)
+#define		EN_WKUP			(1 << 4)
+#define		EN_GFX			(1 << 3)
+#define		EN_DSP			(1 << 2)
+#define		EN_MPU			(1 << 1)
+#define		EN_CORE			(1 << 0)
+
+/* Core power domain state transition control register */
+#define PM_PWSTCTRL_OFFSET		0xe0
+#define		FORCESTATE		(1 << 18)	/* Only for DSP & GFX */
+#define		MEM4RETSTATE		(1 << 6)
+#define		MEM3RETSTATE		(1 << 5)
+#define		MEM2RETSTATE		(1 << 4)
+#define		MEM1RETSTATE		(1 << 3)
+#define		LOGICRETSTATE		(1 << 2)	/* Logic is retained */
+#define		POWERSTATE_OFF		0x3
+#define		POWERSTATE_RETENTION	0x1
+#define		POWERSTATE_ON		0x0
+
+/* Power domain state register */
+#define PM_PWSTST_OFFSET		0xe4
+
+/* Hardware supervised state transition control register */
+#define CM_CLKSTCTRL_OFFSET		0x48
+#define		AUTOSTAT_MPU		(1 << 0)	/* MPU */
+#define		AUTOSTAT_DSS		(1 << 2)	/* Core */
+#define		AUTOSTAT_L4		(1 << 1)	/* Core */
+#define		AUTOSTAT_L3		(1 << 0)	/* Core */
+#define		AUTOSTAT_GFX		(1 << 0)	/* GFX */
+#define		AUTOSTAT_IVA		(1 << 8)	/* 2420 IVA in DSP domain */
+#define		AUTOSTAT_DSP		(1 << 0)	/* DSP */
+#define		AUTOSTAT_MDM		(1 << 0)	/* MDM */
+
+/* Automatic control of interface clock idling */
+#define CM_AUTOIDLE1_OFFSET		0x30
+#define CM_AUTOIDLE2_OFFSET		0x34		/* Core only */
+#define CM_AUTOIDLE3_OFFSET		0x38		/* Core only */
+#define CM_AUTOIDLE4_OFFSET		0x3c		/* Core only */
+#define		AUTO_54M(x)		(((x) & 0x3) << 6)
+#define		AUTO_96M(x)		(((x) & 0x3) << 2)
+#define		AUTO_DPLL(x)		(((x) & 0x3) << 0)
+#define		AUTO_STOPPED		0x3
+#define		AUTO_BYPASS_FAST	0x2		/* DPLL only */
+#define		AUTO_BYPASS_LOW_POWER	0x1		/* DPLL only */
+#define		AUTO_DISABLED		0x0
+
+/* Voltage control PRCM_VOLTCTRL bits */
+#define		AUTO_EXTVOLT		(1 << 15)
+#define		FORCE_EXTVOLT		(1 << 14)
+#define		SETOFF_LEVEL(x)		(((x) & 0x3) << 12)
+#define		MEMRETCTRL		(1 << 8)
+#define		SETRET_LEVEL(x)		(((x) & 0x3) << 6)
+#define		VOLT_LEVEL(x)		(((x) & 0x3) << 0)
+
+#define OMAP24XX_PRCM_VBASE	IO_ADDRESS(OMAP24XX_PRCM_BASE)
+#define prcm_readl(r)		__raw_readl(OMAP24XX_PRCM_VBASE + (r))
+#define prcm_writel(v, r)	__raw_writel((v), OMAP24XX_PRCM_VBASE + (r))
+
+static u32 pmdomain_get_wakeup_dependencies(int domain_offset)
+{
+	return prcm_readl(domain_offset + PM_WKDEP_OFFSET);
+}
+
+static void pmdomain_set_wakeup_dependencies(u32 state, int domain_offset)
+{
+	prcm_writel(state, domain_offset + PM_WKDEP_OFFSET);
+}
+
+static u32 pmdomain_get_powerstate(int domain_offset)
+{
+	return prcm_readl(domain_offset + PM_PWSTCTRL_OFFSET);
+}
+
+static void pmdomain_set_powerstate(u32 state, int domain_offset)
+{
+	prcm_writel(state, domain_offset + PM_PWSTCTRL_OFFSET);
+}
+
+static u32 pmdomain_get_clock_autocontrol(int domain_offset)
+{
+	return prcm_readl(domain_offset + CM_CLKSTCTRL_OFFSET);
+}
+
+static void pmdomain_set_clock_autocontrol(u32 state, int domain_offset)
+{
+	prcm_writel(state, domain_offset + CM_CLKSTCTRL_OFFSET);
+}
+
+static u32 pmdomain_get_clock_autoidle1(int domain_offset)
+{
+	return prcm_readl(domain_offset + CM_AUTOIDLE1_OFFSET);
+}
+
+/* Core domain only */
+static u32 pmdomain_get_clock_autoidle2(int domain_offset)
+{
+	return prcm_readl(domain_offset + CM_AUTOIDLE2_OFFSET);
+}
+
+/* Core domain only */
+static u32 pmdomain_get_clock_autoidle3(int domain_offset)
+{
+	return prcm_readl(domain_offset + CM_AUTOIDLE3_OFFSET);
+}
+
+/* Core domain only */
+static u32 pmdomain_get_clock_autoidle4(int domain_offset)
+{
+	return prcm_readl(domain_offset + CM_AUTOIDLE4_OFFSET);
+}
+
+static void pmdomain_set_clock_autoidle1(u32 state, int domain_offset)
+{
+	prcm_writel(state, CM_AUTOIDLE1_OFFSET + domain_offset);
+}
+
+/* Core domain only */
+static void pmdomain_set_clock_autoidle2(u32 state, int domain_offset)
+{
+	prcm_writel(state, CM_AUTOIDLE2_OFFSET + domain_offset);
+}
+
+/* Core domain only */
+static void pmdomain_set_clock_autoidle3(u32 state, int domain_offset)
+{
+	prcm_writel(state, CM_AUTOIDLE3_OFFSET + domain_offset);
+}
+
+/* Core domain only */
+static void pmdomain_set_clock_autoidle4(u32 state, int domain_offset)
+{
+	prcm_writel(state, CM_AUTOIDLE4_OFFSET + domain_offset);
+}
+
+/*
+ * Configures power management domains to idle clocks automatically.
+ */
+void pmdomain_set_autoidle(void)
+{
+	u32 val;
+
+	/* Set PLL auto stop for 54M, 96M & DPLL */
+	pmdomain_set_clock_autoidle1(AUTO_54M(AUTO_STOPPED) |
+				     AUTO_96M(AUTO_STOPPED) |
+				     AUTO_DPLL(AUTO_STOPPED), PM_PLL_OFFSET);
+
+	/* External clock input control
+	 * REVISIT: Should this be in clock framework?
+	 */
+	PRCM_CLKSRC_CTRL |= (0x3 << 3);
+
+	/* Configure number of 32KHz clock cycles for sys_clk */
+	PRCM_CLKSSETUP = 0x00ff;
+
+	/* Configure automatic voltage transition */
+	PRCM_VOLTSETUP = 0;
+	val = PRCM_VOLTCTRL;
+	val &= ~(SETOFF_LEVEL(0x3) | VOLT_LEVEL(0x3));
+	val |= SETOFF_LEVEL(1) | VOLT_LEVEL(1) | AUTO_EXTVOLT;
+	PRCM_VOLTCTRL = val;
+
+	/* Disable emulation tools functional clock */
+	PRCM_CLKEMUL_CTRL = 0x0;
+
+	/* Set core memory retention state */
+	val = pmdomain_get_powerstate(PM_CORE_OFFSET);
+	if (cpu_is_omap2420()) {
+		val &= ~(0x7 << 3);
+		val |= (MEM3RETSTATE | MEM2RETSTATE | MEM1RETSTATE);
+	} else {
+		val &= ~(0xf << 3);
+		val |= (MEM4RETSTATE | MEM3RETSTATE | MEM2RETSTATE |
+			MEM1RETSTATE);
+	}
+	pmdomain_set_powerstate(val, PM_CORE_OFFSET);
+
+	/* OCP interface smart idle. REVISIT: Enable autoidle bit0 ? */
+	val = SMS_SYSCONFIG;
+	val &= ~(0x3 << 3);
+	val |= (0x2 << 3) | (1 << 0);
+	SMS_SYSCONFIG |= val;
+
+	val = SDRC_SYSCONFIG;
+	val &= ~(0x3 << 3);
+	val |= (0x2 << 3);
+	SDRC_SYSCONFIG = val;
+
+	/* Configure L3 interface for smart idle.
+	 * REVISIT: Enable autoidle bit0 ?
+	 */
+	val = GPMC_SYSCONFIG;
+	val &= ~(0x3 << 3);
+	val |= (0x2 << 3) | (1 << 0);
+	GPMC_SYSCONFIG = val;
+
+	pmdomain_set_powerstate(LOGICRETSTATE | POWERSTATE_RETENTION,
+				PM_MPU_OFFSET);
+	pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_CORE_OFFSET);
+	if (!cpu_is_omap2420())
+		pmdomain_set_powerstate(POWERSTATE_RETENTION, PM_MDM_OFFSET);
+
+	/* Assume suspend function has saved the state for DSP and GFX */
+	pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_DSP_OFFSET);
+	pmdomain_set_powerstate(FORCESTATE | POWERSTATE_OFF, PM_GFX_OFFSET);
+
+#if 0
+	/* REVISIT: Internal USB needs special handling */
+	force_standby_usb();
+	if (cpu_is_omap2430())
+		force_hsmmc();
+	sdram_self_refresh_on_idle_req(1);
+#endif
+
+	/* Enable clock auto control for all domains.
+	 * Note that CORE domain includes also DSS, L4 & L3.
+	 */
+	pmdomain_set_clock_autocontrol(AUTOSTAT_MPU, PM_MPU_OFFSET);
+	pmdomain_set_clock_autocontrol(AUTOSTAT_GFX, PM_GFX_OFFSET);
+	pmdomain_set_clock_autocontrol(AUTOSTAT_DSS | AUTOSTAT_L4 | AUTOSTAT_L3,
+				       PM_CORE_OFFSET);
+	if (cpu_is_omap2420())
+		pmdomain_set_clock_autocontrol(AUTOSTAT_IVA | AUTOSTAT_DSP,
+					       PM_DSP_OFFSET);
+	else {
+		pmdomain_set_clock_autocontrol(AUTOSTAT_DSP, PM_DSP_OFFSET);
+		pmdomain_set_clock_autocontrol(AUTOSTAT_MDM, PM_MDM_OFFSET);
+	}
+
+	/* Enable clock autoidle for all domains */
+	pmdomain_set_clock_autoidle1(0x2, PM_DSP_OFFSET);
+	if (cpu_is_omap2420()) {
+		pmdomain_set_clock_autoidle1(0xfffffff9, PM_CORE_OFFSET);
+		pmdomain_set_clock_autoidle2(0x7, PM_CORE_OFFSET);
+		pmdomain_set_clock_autoidle1(0x3f, PM_WKUP_OFFSET);
+	} else {
+		pmdomain_set_clock_autoidle1(0xeafffff1, PM_CORE_OFFSET);
+		pmdomain_set_clock_autoidle2(0xfff, PM_CORE_OFFSET);
+		pmdomain_set_clock_autoidle1(0x7f, PM_WKUP_OFFSET);
+		pmdomain_set_clock_autoidle1(0x3, PM_MDM_OFFSET);
+	}
+	pmdomain_set_clock_autoidle3(0x7, PM_CORE_OFFSET);
+	pmdomain_set_clock_autoidle4(0x1f, PM_CORE_OFFSET);
+}
+
+/*
+ * Initializes power domains by removing wake-up dependencies and powering
+ * down DSP and GFX. Gets called from PM init. Note that DSP and IVA code
+ * must re-enable DSP and GFX when used.
+ */
+void __init pmdomain_init(void)
+{
+	/* Remove all domain wakeup dependencies */
+	pmdomain_set_wakeup_dependencies(EN_WKUP | EN_CORE, PM_MPU_OFFSET);
+	pmdomain_set_wakeup_dependencies(0, PM_DSP_OFFSET);
+	pmdomain_set_wakeup_dependencies(0, PM_GFX_OFFSET);
+	pmdomain_set_wakeup_dependencies(EN_WKUP | EN_MPU, PM_CORE_OFFSET);
+	if (cpu_is_omap2430())
+		pmdomain_set_wakeup_dependencies(0, PM_MDM_OFFSET);
+
+	/* Power down DSP and GFX */
+	pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_DSP_OFFSET);
+	pmdomain_set_powerstate(POWERSTATE_OFF | FORCESTATE, PM_GFX_OFFSET);
+}

arch/arm/mach-omap2/pm.c

@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/sysfs.h>
 #include <linux/module.h>
+#include <linux/delay.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -36,11 +37,18 @@
 #include <asm/arch/sram.h>
 #include <asm/arch/pm.h>
 
+#include "prcm-regs.h"
+
 static struct clk *vclk;
 static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
 static void (*saved_idle)(void);
 
+extern void __init pmdomain_init(void);
+extern void pmdomain_set_autoidle(void);
+
+static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
+
 void omap2_pm_idle(void)
 {
 	local_irq_disable();
@@ -87,23 +95,272 @@ static int omap2_pm_prepare(suspend_state_t state)
 	return error;
 }
 
+#define INT0_WAKE_MASK	(OMAP_IRQ_BIT(INT_24XX_GPIO_BANK1) |	\
+			OMAP_IRQ_BIT(INT_24XX_GPIO_BANK2) |	\
+			OMAP_IRQ_BIT(INT_24XX_GPIO_BANK3))
+
+#define INT1_WAKE_MASK	(OMAP_IRQ_BIT(INT_24XX_GPIO_BANK4))
+
+#define INT2_WAKE_MASK	(OMAP_IRQ_BIT(INT_24XX_UART1_IRQ) |	\
+			OMAP_IRQ_BIT(INT_24XX_UART2_IRQ) |	\
+			OMAP_IRQ_BIT(INT_24XX_UART3_IRQ))
+
+#define preg(reg)	printk("%s\t(0x%p):\t0x%08x\n", #reg, &reg, reg);
+
+static void omap2_pm_debug(char * desc)
+{
+	printk("%s:\n", desc);
+
+	preg(CM_CLKSTCTRL_MPU);
+	preg(CM_CLKSTCTRL_CORE);
+	preg(CM_CLKSTCTRL_GFX);
+	preg(CM_CLKSTCTRL_DSP);
+	preg(CM_CLKSTCTRL_MDM);
+
+	preg(PM_PWSTCTRL_MPU);
+	preg(PM_PWSTCTRL_CORE);
+	preg(PM_PWSTCTRL_GFX);
+	preg(PM_PWSTCTRL_DSP);
+	preg(PM_PWSTCTRL_MDM);
+
+	preg(PM_PWSTST_MPU);
+	preg(PM_PWSTST_CORE);
+	preg(PM_PWSTST_GFX);
+	preg(PM_PWSTST_DSP);
+	preg(PM_PWSTST_MDM);
+
+	preg(CM_AUTOIDLE1_CORE);
+	preg(CM_AUTOIDLE2_CORE);
+	preg(CM_AUTOIDLE3_CORE);
+	preg(CM_AUTOIDLE4_CORE);
+	preg(CM_AUTOIDLE_WKUP);
+	preg(CM_AUTOIDLE_PLL);
+	preg(CM_AUTOIDLE_DSP);
+	preg(CM_AUTOIDLE_MDM);
+
+	preg(CM_ICLKEN1_CORE);
+	preg(CM_ICLKEN2_CORE);
+	preg(CM_ICLKEN3_CORE);
+	preg(CM_ICLKEN4_CORE);
+	preg(CM_ICLKEN_GFX);
+	preg(CM_ICLKEN_WKUP);
+	preg(CM_ICLKEN_DSP);
+	preg(CM_ICLKEN_MDM);
+
+	preg(CM_IDLEST1_CORE);
+	preg(CM_IDLEST2_CORE);
+	preg(CM_IDLEST3_CORE);
+	preg(CM_IDLEST4_CORE);
+	preg(CM_IDLEST_GFX);
+	preg(CM_IDLEST_WKUP);
+	preg(CM_IDLEST_CKGEN);
+	preg(CM_IDLEST_DSP);
+	preg(CM_IDLEST_MDM);
+
+	preg(RM_RSTST_MPU);
+	preg(RM_RSTST_GFX);
+	preg(RM_RSTST_WKUP);
+	preg(RM_RSTST_DSP);
+	preg(RM_RSTST_MDM);
+
+	preg(PM_WKDEP_MPU);
+	preg(PM_WKDEP_CORE);
+	preg(PM_WKDEP_GFX);
+	preg(PM_WKDEP_DSP);
+	preg(PM_WKDEP_MDM);
+
+	preg(CM_FCLKEN_WKUP);
+	preg(CM_ICLKEN_WKUP);
+	preg(CM_IDLEST_WKUP);
+	preg(CM_AUTOIDLE_WKUP);
+	preg(CM_CLKSEL_WKUP);
+
+	preg(PM_WKEN_WKUP);
+	preg(PM_WKST_WKUP);
+}
+
+static inline void omap2_pm_save_registers(void)
+{
+	/* Save interrupt registers */
+	OMAP24XX_SAVE(INTC_MIR0);
+	OMAP24XX_SAVE(INTC_MIR1);
+	OMAP24XX_SAVE(INTC_MIR2);
+
+	/* Save power control registers */
+	OMAP24XX_SAVE(CM_CLKSTCTRL_MPU);
+	OMAP24XX_SAVE(CM_CLKSTCTRL_CORE);
+	OMAP24XX_SAVE(CM_CLKSTCTRL_GFX);
+	OMAP24XX_SAVE(CM_CLKSTCTRL_DSP);
+	OMAP24XX_SAVE(CM_CLKSTCTRL_MDM);
+
+	/* Save power state registers */
+	OMAP24XX_SAVE(PM_PWSTCTRL_MPU);
+	OMAP24XX_SAVE(PM_PWSTCTRL_CORE);
+	OMAP24XX_SAVE(PM_PWSTCTRL_GFX);
+	OMAP24XX_SAVE(PM_PWSTCTRL_DSP);
+	OMAP24XX_SAVE(PM_PWSTCTRL_MDM);
+
+	/* Save autoidle registers */
+	OMAP24XX_SAVE(CM_AUTOIDLE1_CORE);
+	OMAP24XX_SAVE(CM_AUTOIDLE2_CORE);
+	OMAP24XX_SAVE(CM_AUTOIDLE3_CORE);
+	OMAP24XX_SAVE(CM_AUTOIDLE4_CORE);
+	OMAP24XX_SAVE(CM_AUTOIDLE_WKUP);
+	OMAP24XX_SAVE(CM_AUTOIDLE_PLL);
+	OMAP24XX_SAVE(CM_AUTOIDLE_DSP);
+	OMAP24XX_SAVE(CM_AUTOIDLE_MDM);
+
+	/* Save idle state registers */
+	OMAP24XX_SAVE(CM_IDLEST1_CORE);
+	OMAP24XX_SAVE(CM_IDLEST2_CORE);
+	OMAP24XX_SAVE(CM_IDLEST3_CORE);
+	OMAP24XX_SAVE(CM_IDLEST4_CORE);
+	OMAP24XX_SAVE(CM_IDLEST_GFX);
+	OMAP24XX_SAVE(CM_IDLEST_WKUP);
+	OMAP24XX_SAVE(CM_IDLEST_CKGEN);
+	OMAP24XX_SAVE(CM_IDLEST_DSP);
+	OMAP24XX_SAVE(CM_IDLEST_MDM);
+
+	/* Save clock registers */
+	OMAP24XX_SAVE(CM_FCLKEN1_CORE);
+	OMAP24XX_SAVE(CM_FCLKEN2_CORE);
+	OMAP24XX_SAVE(CM_ICLKEN1_CORE);
+	OMAP24XX_SAVE(CM_ICLKEN2_CORE);
+	OMAP24XX_SAVE(CM_ICLKEN3_CORE);
+	OMAP24XX_SAVE(CM_ICLKEN4_CORE);
+}
+
+static inline void omap2_pm_restore_registers(void)
+{
+	/* Restore clock state registers */
+	OMAP24XX_RESTORE(CM_CLKSTCTRL_MPU);
+	OMAP24XX_RESTORE(CM_CLKSTCTRL_CORE);
+	OMAP24XX_RESTORE(CM_CLKSTCTRL_GFX);
+	OMAP24XX_RESTORE(CM_CLKSTCTRL_DSP);
+	OMAP24XX_RESTORE(CM_CLKSTCTRL_MDM);
+
+	/* Restore power state registers */
+	OMAP24XX_RESTORE(PM_PWSTCTRL_MPU);
+	OMAP24XX_RESTORE(PM_PWSTCTRL_CORE);
+	OMAP24XX_RESTORE(PM_PWSTCTRL_GFX);
+	OMAP24XX_RESTORE(PM_PWSTCTRL_DSP);
+	OMAP24XX_RESTORE(PM_PWSTCTRL_MDM);
+
+	/* Restore idle state registers */
+	OMAP24XX_RESTORE(CM_IDLEST1_CORE);
+	OMAP24XX_RESTORE(CM_IDLEST2_CORE);
+	OMAP24XX_RESTORE(CM_IDLEST3_CORE);
+	OMAP24XX_RESTORE(CM_IDLEST4_CORE);
+	OMAP24XX_RESTORE(CM_IDLEST_GFX);
+	OMAP24XX_RESTORE(CM_IDLEST_WKUP);
+	OMAP24XX_RESTORE(CM_IDLEST_CKGEN);
+	OMAP24XX_RESTORE(CM_IDLEST_DSP);
+	OMAP24XX_RESTORE(CM_IDLEST_MDM);
+
+	/* Restore autoidle registers */
+	OMAP24XX_RESTORE(CM_AUTOIDLE1_CORE);
+	OMAP24XX_RESTORE(CM_AUTOIDLE2_CORE);
+	OMAP24XX_RESTORE(CM_AUTOIDLE3_CORE);
+	OMAP24XX_RESTORE(CM_AUTOIDLE4_CORE);
+	OMAP24XX_RESTORE(CM_AUTOIDLE_WKUP);
+	OMAP24XX_RESTORE(CM_AUTOIDLE_PLL);
+	OMAP24XX_RESTORE(CM_AUTOIDLE_DSP);
+	OMAP24XX_RESTORE(CM_AUTOIDLE_MDM);
+
+	/* Restore clock registers */
+	OMAP24XX_RESTORE(CM_FCLKEN1_CORE);
+	OMAP24XX_RESTORE(CM_FCLKEN2_CORE);
+	OMAP24XX_RESTORE(CM_ICLKEN1_CORE);
+	OMAP24XX_RESTORE(CM_ICLKEN2_CORE);
+	OMAP24XX_RESTORE(CM_ICLKEN3_CORE);
+	OMAP24XX_RESTORE(CM_ICLKEN4_CORE);
+
+	/* REVISIT: Clear interrupts here */
+
+	/* Restore interrupt registers */
+	OMAP24XX_RESTORE(INTC_MIR0);
+	OMAP24XX_RESTORE(INTC_MIR1);
+	OMAP24XX_RESTORE(INTC_MIR2);
+}
+
+static int omap2_pm_suspend(void)
+{
+	int processor_type = 0;
+
+	/* REVISIT: 0x21 or 0x26? */
+	if (cpu_is_omap2420())
+		processor_type = 0x21;
+
+	if (!processor_type)
+		return -ENOTSUPP;
+
+	local_irq_disable();
+	local_fiq_disable();
+
+	omap2_pm_save_registers();
+
+	/* Disable interrupts except for the wake events */
+	INTC_MIR_SET0 = 0xffffffff & ~INT0_WAKE_MASK;
+	INTC_MIR_SET1 = 0xffffffff & ~INT1_WAKE_MASK;
+	INTC_MIR_SET2 = 0xffffffff & ~INT2_WAKE_MASK;
+
+	pmdomain_set_autoidle();
+
+	/* Clear old wake-up events */
+	PM_WKST1_CORE = 0;
+	PM_WKST2_CORE = 0;
+	PM_WKST_WKUP = 0;
+
+	/* Enable wake-up events */
+	PM_WKEN1_CORE = (1 << 22) | (1 << 21);	/* UART1 & 2 */
+	PM_WKEN2_CORE = (1 << 2);		/* UART3 */
+	PM_WKEN_WKUP = (1 << 2) | (1 << 0);	/* GPIO & GPT1 */
+
+	/* Disable clocks except for CM_ICLKEN2_CORE. It gets disabled
+	 * in the SRAM suspend code */
+	CM_FCLKEN1_CORE = 0;
+	CM_FCLKEN2_CORE = 0;
+	CM_ICLKEN1_CORE = 0;
+	CM_ICLKEN3_CORE = 0;
+	CM_ICLKEN4_CORE = 0;
+
+	omap2_pm_debug("Status before suspend");
+
+	/* Must wait for serial buffers to clear */
+	mdelay(200);
+
+	/* Jump to SRAM suspend code
+	 * REVISIT: When is this SDRC_DLLB_CTRL?
+	 */
+	omap2_sram_suspend(SDRC_DLLA_CTRL, processor_type);
+
+	/* Back from sleep */
+	omap2_pm_restore_registers();
+
+	local_fiq_enable();
+	local_irq_enable();
+
+	return 0;
+}
+
 static int omap2_pm_enter(suspend_state_t state)
 {
+	int ret = 0;
+
 	switch (state)
 	{
 	case PM_SUSPEND_STANDBY:
 	case PM_SUSPEND_MEM:
-		/* FIXME: Add suspend */
+		ret = omap2_pm_suspend();
 		break;
-
 	case PM_SUSPEND_DISK:
-		return -ENOTSUPP;
-
+		ret = -ENOTSUPP;
+		break;
 	default:
-		return -EINVAL;
+		ret = -EINVAL;
 	}
 
-	return 0;
+	return ret;
 }
 
 static int omap2_pm_finish(suspend_state_t state)
@@ -143,6 +400,8 @@ int __init omap2_pm_init(void)
 	pm_set_ops(&omap_pm_ops);
 	pm_idle = omap2_pm_idle;
 
+	pmdomain_init();
+
 	return 0;
 }
 

arch/arm/mach-omap2/timer-gp.c

@@ -6,6 +6,7 @@
  * Copyright (C) 2005 Nokia Corporation
  * Author: Paul Mundt <paul.mundt@nokia.com>
  *         Juha Yrjölä <juha.yrjola@nokia.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
  *
  * Some parts based off of TI's 24xx code:
  *
@@ -22,54 +23,18 @@
 #include <linux/interrupt.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 
 #include <asm/mach/time.h>
-#include <asm/delay.h>
-#include <asm/io.h>
+#include <asm/arch/dmtimer.h>
 
-#define OMAP2_GP_TIMER1_BASE	0x48028000
-#define OMAP2_GP_TIMER2_BASE	0x4802a000
-#define OMAP2_GP_TIMER3_BASE	0x48078000
-#define OMAP2_GP_TIMER4_BASE	0x4807a000
+static struct omap_dm_timer *gptimer;
 
-#define GP_TIMER_TIDR		0x00
-#define GP_TIMER_TISR		0x18
-#define GP_TIMER_TIER		0x1c
-#define GP_TIMER_TCLR		0x24
-#define GP_TIMER_TCRR		0x28
-#define GP_TIMER_TLDR		0x2c
-#define GP_TIMER_TSICR		0x40
-
-#define OS_TIMER_NR		1  /* GP timer 2 */
-
-static unsigned long timer_base[] = {
-	IO_ADDRESS(OMAP2_GP_TIMER1_BASE),
-	IO_ADDRESS(OMAP2_GP_TIMER2_BASE),
-	IO_ADDRESS(OMAP2_GP_TIMER3_BASE),
-	IO_ADDRESS(OMAP2_GP_TIMER4_BASE),
-};
-
-static inline unsigned int timer_read_reg(int nr, unsigned int reg)
-{
-	return __raw_readl(timer_base[nr] + reg);
-}
-
-static inline void timer_write_reg(int nr, unsigned int reg, unsigned int val)
-{
-	__raw_writel(val, timer_base[nr] + reg);
-}
-
-/* Note that we always enable the clock prescale divider bit */
-static inline void omap2_gp_timer_start(int nr, unsigned long load_val)
+static inline void omap2_gp_timer_start(unsigned long load_val)
 {
-	unsigned int tmp;
-
-	tmp = 0xffffffff - load_val;
-
-	timer_write_reg(nr, GP_TIMER_TLDR, tmp);
-	timer_write_reg(nr, GP_TIMER_TCRR, tmp);
-	timer_write_reg(nr, GP_TIMER_TIER, 1 << 1);
-	timer_write_reg(nr, GP_TIMER_TCLR, (1 << 5) | (1 << 1) | 1);
+	omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
+	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
+	omap_dm_timer_start(gptimer);
 }
 
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
@@ -77,7 +42,7 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
 {
 	write_seqlock(&xtime_lock);
 
-	timer_write_reg(OS_TIMER_NR, GP_TIMER_TISR, 1 << 1);
+	omap_dm_timer_write_status(gptimer, OMAP_TIMER_INT_OVERFLOW);
 	timer_tick(regs);
 
 	write_sequnlock(&xtime_lock);
@@ -87,41 +52,26 @@ static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id,
 
 static struct irqaction omap2_gp_timer_irq = {
 	.name		= "gp timer",
-	.flags		= SA_INTERRUPT,
+	.flags		= SA_INTERRUPT | SA_TIMER,
 	.handler	= omap2_gp_timer_interrupt,
 };
 
 static void __init omap2_gp_timer_init(void)
 {
-	struct clk * sys_ck;
-	u32 tick_period = 120000;
-	u32 l;
+	u32 tick_period;
 
-	/* Reset clock and prescale value */
-	timer_write_reg(OS_TIMER_NR, GP_TIMER_TCLR, 0);
+	omap_dm_timer_init();
+	gptimer = omap_dm_timer_request_specific(1);
+	BUG_ON(gptimer == NULL);
 
-	sys_ck = clk_get(NULL, "sys_ck");
-	if (IS_ERR(sys_ck))
-		printk(KERN_ERR "Could not get sys_ck\n");
-	else {
-		clk_enable(sys_ck);
-		tick_period = clk_get_rate(sys_ck) / 100;
-		clk_put(sys_ck);
-	}
-
-	tick_period /= 2;	/* Minimum prescale divider is 2 */
+	omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
+	tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / 100;
 	tick_period -= 1;
 
-	l = timer_read_reg(OS_TIMER_NR, GP_TIMER_TIDR);
-	printk(KERN_INFO "OMAP2 GP timer (HW version %d.%d)\n",
-	       (l >> 4) & 0x0f, l & 0x0f);
-
-	setup_irq(38, &omap2_gp_timer_irq);
-
-	omap2_gp_timer_start(OS_TIMER_NR, tick_period);
+	setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
+	omap2_gp_timer_start(tick_period);
 }
 
 struct sys_timer omap_timer = {
 	.init	= omap2_gp_timer_init,
 };
-

arch/arm/mach-pxa/Kconfig

@@ -35,6 +35,10 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+config MACH_TRIZEPS4
+	bool "Keith und Koep Trizeps4 DIMM-Module"
+	select PXA27x
+
 endchoice
 
 if PXA_SHARPSL
@@ -55,6 +59,21 @@ endchoice
 
 endif
 
+if MACH_TRIZEPS4
+
+choice
+	prompt "Select base board for Trizeps 4 module"
+
+config MACH_TRIZEPS4_CONXS
+	bool "ConXS Eval Board"
+
+config MACH_TRIZEPS4_ANY
+	bool "another Board"
+
+endchoice
+
+endif
+
 endmenu
 
 config MACH_POODLE

arch/arm/mach-pxa/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
 obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
+obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_MACH_AKITA)	+= akita-ioexp.o
@@ -23,6 +24,7 @@ led-y := leds.o
 led-$(CONFIG_ARCH_LUBBOCK) += leds-lubbock.o
 led-$(CONFIG_MACH_MAINSTONE) += leds-mainstone.o
 led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o
+led-$(CONFIG_MACH_TRIZEPS4) += leds-trizeps4.o
 
 obj-$(CONFIG_LEDS) += $(led-y)
 

arch/arm/mach-pxa/leds-trizeps4.c

@@ -0,0 +1,134 @@
+/*
+ * linux/arch/arm/mach-pxa/leds-trizeps4.c
+ *
+ *  Author:	Jürgen Schindele
+ *  Created:	20 02, 2006
+ *  Copyright:	Jürgen Schindele
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <asm/hardware.h>
+#include <asm/system.h>
+#include <asm/types.h>
+#include <asm/leds.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/trizeps4.h>
+
+#include "leds.h"
+
+#define LED_STATE_ENABLED	1
+#define LED_STATE_CLAIMED	2
+
+#define SYS_BUSY		0x01
+#define HEARTBEAT		0x02
+#define BLINK			0x04
+
+static unsigned int led_state;
+static unsigned int hw_led_state;
+
+void trizeps4_leds_event(led_event_t evt)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	switch (evt) {
+	case led_start:
+		hw_led_state = 0;
+		pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);		/* LED1 */
+		pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);		/* LED2 */
+		led_state = LED_STATE_ENABLED;
+		break;
+
+	case led_stop:
+		led_state &= ~LED_STATE_ENABLED;
+		break;
+
+	case led_claim:
+		led_state |= LED_STATE_CLAIMED;
+		hw_led_state = 0;
+		break;
+
+	case led_release:
+		led_state &= ~LED_STATE_CLAIMED;
+		hw_led_state = 0;
+		break;
+
+#ifdef CONFIG_LEDS_TIMER
+	case led_timer:
+		hw_led_state ^= HEARTBEAT;
+		break;
+#endif
+
+#ifdef CONFIG_LEDS_CPU
+	case led_idle_start:
+		hw_led_state &= ~SYS_BUSY;
+		break;
+
+	case led_idle_end:
+		hw_led_state |= SYS_BUSY;
+		break;
+#endif
+
+	case led_halted:
+		break;
+
+	case led_green_on:
+		hw_led_state |= BLINK;
+		break;
+
+	case led_green_off:
+		hw_led_state &= ~BLINK;
+		break;
+
+	case led_amber_on:
+		break;
+
+	case led_amber_off:
+		break;
+
+	case led_red_on:
+		break;
+
+	case led_red_off:
+		break;
+
+	default:
+		break;
+	}
+
+	if  (led_state & LED_STATE_ENABLED) {
+		switch (hw_led_state) {
+			case 0:
+				GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
+				GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+				break;
+			case 1:
+				GPCR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
+				GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+				break;
+			case 2:
+				GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
+				GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+				break;
+			case 3:
+				GPCR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
+				GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+				break;
+		}
+	}
+	else {
+		/* turn all off */
+		GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
+		GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
+	}
+
+	local_irq_restore(flags);
+}

arch/arm/mach-pxa/leds.c

@@ -24,6 +24,8 @@ pxa_leds_init(void)
 		leds_event = mainstone_leds_event;
 	if (machine_is_pxa_idp())
 		leds_event = idp_leds_event;
+	if (machine_is_trizeps4())
+		leds_event = trizeps4_leds_event;
 
 	leds_event(led_start);
 	return 0;

arch/arm/mach-pxa/leds.h

@@ -10,3 +10,4 @@
 extern void idp_leds_event(led_event_t evt);
 extern void lubbock_leds_event(led_event_t evt);
 extern void mainstone_leds_event(led_event_t evt);
+extern void trizeps4_leds_event(led_event_t evt);

arch/arm/mach-pxa/lpd270.c

@@ -248,58 +248,137 @@ static void lpd270_backlight_power(int on)
 
 /* 5.7" TFT QVGA (LoLo display number 1) */
 static struct pxafb_mach_info sharp_lq057q3dc02 __initdata = {
-	.pixclock		= 100000,
-	.xres			= 240,
-	.yres			= 320,
+	.pixclock		= 150000,
+	.xres			= 320,
+	.yres			= 240,
 	.bpp			= 16,
-	.hsync_len		= 64,
-	.left_margin		= 0x27,
-	.right_margin		= 0x09,
-	.vsync_len		= 0x04,
+	.hsync_len		= 0x14,
+	.left_margin		= 0x28,
+	.right_margin		= 0x0a,
+	.vsync_len		= 0x02,
 	.upper_margin		= 0x08,
 	.lower_margin		= 0x14,
-	.sync			= 0,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	.lccr0			= 0x07800080,
-	.lccr3			= 0x04400007,
+	.lccr3			= 0x00400000,
+	.pxafb_backlight_power	= lpd270_backlight_power,
+};
+
+/* 12.1" TFT SVGA (LoLo display number 2) */
+static struct pxafb_mach_info sharp_lq121s1dg31 __initdata = {
+	.pixclock		= 50000,
+	.xres			= 800,
+	.yres			= 600,
+	.bpp			= 16,
+	.hsync_len		= 0x05,
+	.left_margin		= 0x52,
+	.right_margin		= 0x05,
+	.vsync_len		= 0x04,
+	.upper_margin		= 0x14,
+	.lower_margin		= 0x0a,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.lccr0			= 0x07800080,
+	.lccr3			= 0x00400000,
+	.pxafb_backlight_power	= lpd270_backlight_power,
+};
+
+/* 3.6" TFT QVGA (LoLo display number 3) */
+static struct pxafb_mach_info sharp_lq036q1da01 __initdata = {
+	.pixclock		= 150000,
+	.xres			= 320,
+	.yres			= 240,
+	.bpp			= 16,
+	.hsync_len		= 0x0e,
+	.left_margin		= 0x04,
+	.right_margin		= 0x0a,
+	.vsync_len		= 0x03,
+	.upper_margin		= 0x03,
+	.lower_margin		= 0x03,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.lccr0			= 0x07800080,
+	.lccr3			= 0x00400000,
 	.pxafb_backlight_power	= lpd270_backlight_power,
 };
 
 /* 6.4" TFT VGA (LoLo display number 5) */
 static struct pxafb_mach_info sharp_lq64d343 __initdata = {
-	.pixclock		= 20000,
+	.pixclock		= 25000,
 	.xres			= 640,
 	.yres			= 480,
 	.bpp			= 16,
-	.hsync_len		= 49,
+	.hsync_len		= 0x31,
 	.left_margin		= 0x89,
 	.right_margin		= 0x19,
-	.vsync_len		= 18,
+	.vsync_len		= 0x12,
 	.upper_margin		= 0x22,
-	.lower_margin		= 0,
+	.lower_margin		= 0x00,
 	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	.lccr0			= 0x07800080,
-	.lccr3			= 0x04400001,
+	.lccr3			= 0x00400000,
+	.pxafb_backlight_power	= lpd270_backlight_power,
+};
+
+/* 10.4" TFT VGA (LoLo display number 7) */
+static struct pxafb_mach_info sharp_lq10d368 __initdata = {
+	.pixclock		= 25000,
+	.xres			= 640,
+	.yres			= 480,
+	.bpp			= 16,
+	.hsync_len		= 0x31,
+	.left_margin		= 0x89,
+	.right_margin		= 0x19,
+	.vsync_len		= 0x12,
+	.upper_margin		= 0x22,
+	.lower_margin		= 0x00,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.lccr0			= 0x07800080,
+	.lccr3			= 0x00400000,
 	.pxafb_backlight_power	= lpd270_backlight_power,
 };
 
 /* 3.5" TFT QVGA (LoLo display number 8) */
 static struct pxafb_mach_info sharp_lq035q7db02_20 __initdata = {
-	.pixclock		= 100000,
+	.pixclock		= 150000,
 	.xres			= 240,
 	.yres			= 320,
 	.bpp			= 16,
-	.hsync_len		= 0x34,
-	.left_margin		= 0x09,
-	.right_margin		= 0x09,
-	.vsync_len		= 0x08,
+	.hsync_len		= 0x0e,
+	.left_margin		= 0x0a,
+	.right_margin		= 0x0a,
+	.vsync_len		= 0x03,
 	.upper_margin		= 0x05,
 	.lower_margin		= 0x14,
-	.sync			= 0,
+	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 	.lccr0			= 0x07800080,
-	.lccr3			= 0x04400007,
+	.lccr3			= 0x00400000,
 	.pxafb_backlight_power	= lpd270_backlight_power,
 };
 
+static struct pxafb_mach_info *lpd270_lcd_to_use;
+
+static int __init lpd270_set_lcd(char *str)
+{
+	if (!strnicmp(str, "lq057q3dc02", 11)) {
+		lpd270_lcd_to_use = &sharp_lq057q3dc02;
+	} else if (!strnicmp(str, "lq121s1dg31", 11)) {
+		lpd270_lcd_to_use = &sharp_lq121s1dg31;
+	} else if (!strnicmp(str, "lq036q1da01", 11)) {
+		lpd270_lcd_to_use = &sharp_lq036q1da01;
+	} else if (!strnicmp(str, "lq64d343", 8)) {
+		lpd270_lcd_to_use = &sharp_lq64d343;
+	} else if (!strnicmp(str, "lq10d368", 8)) {
+		lpd270_lcd_to_use = &sharp_lq10d368;
+	} else if (!strnicmp(str, "lq035q7db02-20", 14)) {
+		lpd270_lcd_to_use = &sharp_lq035q7db02_20;
+	} else {
+		printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
+	}
+
+	return 1;
+}
+
+__setup("lcd=", lpd270_set_lcd);
+
 static struct platform_device *platform_devices[] __initdata = {
 	&smc91x_device,
 	&lpd270_audio_device,
@@ -345,9 +424,8 @@ static void __init lpd270_init(void)
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
-	// set_pxa_fb_info(&sharp_lq057q3dc02);
-	set_pxa_fb_info(&sharp_lq64d343);
-	// set_pxa_fb_info(&sharp_lq035q7db02_20);
+	if (lpd270_lcd_to_use != NULL)
+		set_pxa_fb_info(lpd270_lcd_to_use);
 
 	pxa_set_ohci_info(&lpd270_ohci_platform_data);
 }

arch/arm/mach-pxa/trizeps4.c

@@ -0,0 +1,471 @@
+/*
+ *  linux/arch/arm/mach-pxa/trizeps4.c
+ *
+ *  Support for the Keith und Koep Trizeps4 Module Platform.
+ *
+ *  Author:	Jürgen Schindele
+ *  Created:	20 02, 2006
+ *  Copyright:	Jürgen Schindele
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/trizeps4.h>
+#include <asm/arch/audio.h>
+#include <asm/arch/pxafb.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/irda.h>
+#include <asm/arch/ohci.h>
+
+#include "generic.h"
+
+/********************************************************************************************
+ * ONBOARD FLASH
+ ********************************************************************************************/
+static struct mtd_partition trizeps4_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	},{
+		.name =		"Kernel",
+		.size =		0x00400000,
+		.offset =	0x00040000
+	},{
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00440000
+	}
+};
+
+static struct flash_platform_data trizeps4_flash_data[] = {
+	{
+		.map_name	= "cfi_probe",
+		.parts		= trizeps4_partitions,
+		.nr_parts	= ARRAY_SIZE(trizeps4_partitions)
+	}
+};
+
+static struct resource flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_64M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "pxa2xx-flash",
+	.id		= 0,
+	.dev = {
+		.platform_data = &trizeps4_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/********************************************************************************************
+ * DAVICOM DM9000 Ethernet
+ ********************************************************************************************/
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= TRIZEPS4_ETH_PHYS+0x300,
+		.end	= TRIZEPS4_ETH_PHYS+0x400-1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= TRIZEPS4_ETH_PHYS+0x8300,
+		.end	= TRIZEPS4_ETH_PHYS+0x8400-1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= TRIZEPS4_ETH_IRQ,
+		.end	= TRIZEPS4_ETH_IRQ,
+		.flags	= (IORESOURCE_IRQ | IRQT_RISING),
+	},
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+};
+
+/********************************************************************************************
+ * PXA270 serial ports
+ ********************************************************************************************/
+static struct plat_serial8250_port tri_serial_ports[] = {
+#ifdef CONFIG_SERIAL_PXA
+	/* this uses the own PXA driver */
+	{
+		0,
+	},
+#else
+	/* this uses the generic 8520 driver */
+	[0] = {
+		.membase	= (void *)&FFUART,
+		.irq		= IRQ_FFUART,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+		.uartclk	= (921600*16),
+	},
+	[1] = {
+		.membase	= (void *)&BTUART,
+		.irq		= IRQ_BTUART,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM32,
+		.regshift	= 2,
+		.uartclk	= (921600*16),
+	},
+	{
+		0,
+	},
+#endif
+};
+
+static struct platform_device uart_devices = {
+	.name		= "serial8250",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= tri_serial_ports,
+	},
+	.num_resources	= 0,
+	.resource	= NULL,
+};
+
+/********************************************************************************************
+ * PXA270 ac97 sound codec
+ ********************************************************************************************/
+static struct platform_device ac97_audio_device = {
+	.name		= "pxa2xx-ac97",
+	.id		= -1,
+};
+
+static struct platform_device * trizeps4_devices[] __initdata = {
+	&flash_device,
+	&uart_devices,
+	&dm9000_device,
+	&ac97_audio_device,
+};
+
+#ifdef CONFIG_MACH_TRIZEPS4_CONXS
+static short trizeps_conxs_bcr;
+
+/* PCCARD power switching supports only 3,3V */
+void board_pcmcia_power(int power)
+{
+	if (power) {
+		/* switch power on, put in reset and enable buffers */
+		trizeps_conxs_bcr |= power;
+		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
+		trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN);
+		ConXS_BCR = trizeps_conxs_bcr;
+		/* wait a little */
+		udelay(2000);
+		/* take reset away */
+		trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET);
+		ConXS_BCR = trizeps_conxs_bcr;
+		udelay(2000);
+	} else {
+		/* put in reset */
+		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
+		ConXS_BCR = trizeps_conxs_bcr;
+		udelay(1000);
+		/* switch power off */
+		trizeps_conxs_bcr &= ~(0xf);
+		ConXS_BCR = trizeps_conxs_bcr;
+
+	}
+	pr_debug("%s: o%s 0x%x\n", __FUNCTION__, power ? "n": "ff", trizeps_conxs_bcr);
+}
+
+/* backlight power switching for LCD panel */
+static void board_backlight_power(int on)
+{
+	if (on) {
+		trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
+	} else {
+		trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
+	}
+	pr_debug("%s: o%s 0x%x\n", __FUNCTION__, on ? "n" : "ff", trizeps_conxs_bcr);
+	ConXS_BCR = trizeps_conxs_bcr;
+}
+
+/* Powersupply for MMC/SD cardslot */
+static void board_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data* p_d = dev->platform_data;
+
+	if (( 1 << vdd) & p_d->ocr_mask) {
+		pr_debug("%s: on\n", __FUNCTION__);
+		/* FIXME fill in values here */
+	} else {
+		pr_debug("%s: off\n", __FUNCTION__);
+		/* FIXME fill in values here */
+	}
+}
+
+static short trizeps_conxs_ircr;
+
+/* Switch modes and Power for IRDA receiver */
+static void board_irda_mode(struct device *dev, int mode)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	if (mode & IR_SIRMODE) {
+		/* Slow mode */
+		trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;
+	} else if (mode & IR_FIRMODE) {
+		/* Fast mode */
+		trizeps_conxs_ircr |= ConXS_IRCR_MODE;
+	}
+	if (mode & IR_OFF) {
+		trizeps_conxs_ircr |= ConXS_IRCR_SD;
+	} else {
+		trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+	}
+	/* FIXME write values to register */
+	local_irq_restore(flags);
+}
+
+#else
+/* for other baseboards define dummies */
+void board_pcmcia_power(int power)	{;}
+#define board_backlight_power		NULL
+#define board_mci_power			NULL
+#define board_irda_mode			NULL
+
+#endif		/* CONFIG_MACH_TRIZEPS4_CONXS */
+EXPORT_SYMBOL(board_pcmcia_power);
+
+static int trizeps4_mci_init(struct device *dev, irqreturn_t (*mci_detect_int)(int, void *, struct pt_regs *), void *data)
+{
+	int err;
+	/* setup GPIO for PXA27x MMC controller */
+	pxa_gpio_mode(GPIO32_MMCCLK_MD);
+	pxa_gpio_mode(GPIO112_MMCCMD_MD);
+	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
+	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
+	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
+	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
+
+	pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
+
+	err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int, SA_INTERRUPT | SA_TRIGGER_RISING, "MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+		return -1;
+	}
+	return 0;
+}
+
+static void trizeps4_mci_exit(struct device *dev, void *data)
+{
+	free_irq(TRIZEPS4_MMC_IRQ, data);
+}
+
+static struct pxamci_platform_data trizeps4_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 		= trizeps4_mci_init,
+	.exit		= trizeps4_mci_exit,
+	.setpower 	= board_mci_power,
+};
+
+static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode = board_irda_mode,
+};
+
+static int trizeps4_ohci_init(struct device *dev)
+{
+	/* setup Port1 GPIO pin. */
+	pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN);	/* USBHPWR1 */
+	pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT);	/* USBHPEN1 */
+
+	/* Set the Power Control Polarity Low and Power Sense
+	   Polarity Low to active low. */
+	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
+		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+
+	return 0;
+}
+
+static void trizeps4_ohci_exit(struct device *dev)
+{
+	;
+}
+
+static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.init		= trizeps4_ohci_init,
+	.exit		= trizeps4_ohci_exit,
+};
+
+static struct map_desc trizeps4_io_desc[] __initdata = {
+	{ 	/* ConXS CFSR */
+		.virtual	= TRIZEPS4_CFSR_VIRT,
+		.pfn		= __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
+		.length		= 0x00001000,
+		.type		= MT_DEVICE
+	},
+	{	/* ConXS BCR */
+		.virtual	= TRIZEPS4_BOCR_VIRT,
+		.pfn		= __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
+		.length		= 0x00001000,
+		.type		= MT_DEVICE
+	},
+	{ 	/* ConXS IRCR */
+		.virtual	= TRIZEPS4_IRCR_VIRT,
+		.pfn		= __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
+		.length		= 0x00001000,
+		.type		= MT_DEVICE
+	},
+	{	/* ConXS DCR */
+		.virtual	= TRIZEPS4_DICR_VIRT,
+		.pfn		= __phys_to_pfn(TRIZEPS4_DICR_PHYS),
+		.length		= 0x00001000,
+		.type		= MT_DEVICE
+	},
+	{	/* ConXS UPSR */
+		.virtual	= TRIZEPS4_UPSR_VIRT,
+		.pfn		= __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
+		.length		= 0x00001000,
+		.type		= MT_DEVICE
+	}
+};
+
+static struct pxafb_mach_info sharp_lcd __initdata = {
+    .pixclock		= 78000,
+    .xres		= 640,
+    .yres		= 480,
+    .bpp		= 8,
+    .hsync_len		= 4,
+    .left_margin	= 4,
+    .right_margin	= 4,
+    .vsync_len		= 2,
+    .upper_margin	= 0,
+    .lower_margin	= 0,
+    .sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+    .cmap_greyscale	= 0,
+    .cmap_inverse	= 0,
+    .cmap_static	= 0,
+    .lccr0		= LCCR0_Color | LCCR0_Pas | LCCR0_Dual,
+    .lccr3		= 0x0340ff02,
+    .pxafb_backlight_power = board_backlight_power,
+};
+
+static void __init trizeps4_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi)
+{
+}
+
+static void __init trizeps4_init(void)
+{
+	platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
+
+	set_pxa_fb_info(&sharp_lcd);
+
+	pxa_set_mci_info(&trizeps4_mci_platform_data);
+	pxa_set_ficp_info(&trizeps4_ficp_platform_data);
+	pxa_set_ohci_info(&trizeps4_ohci_platform_data);
+}
+
+static void __init trizeps4_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
+
+	/* for DiskOnChip */
+	pxa_gpio_mode(GPIO15_nCS_1_MD);
+
+	/* for off-module PIC on ConXS board */
+	pxa_gpio_mode(GPIO_PIC | GPIO_IN);
+
+	/* UCB1400 irq */
+	pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN);
+
+	/* for DM9000 LAN */
+	pxa_gpio_mode(GPIO78_nCS_2_MD);
+	pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
+
+	/* for PCMCIA device */
+	pxa_gpio_mode(GPIO_PCD | GPIO_IN);
+	pxa_gpio_mode(GPIO_PRDY | GPIO_IN);
+
+	/* for I2C adapter */
+	pxa_gpio_mode(GPIO117_I2CSCL_MD);
+	pxa_gpio_mode(GPIO118_I2CSDA_MD);
+
+	/* MMC_DET s.o. */
+	pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
+
+	/* whats that for ??? */
+	pxa_gpio_mode(GPIO79_nCS_3_MD);
+
+	pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);		/* LED1 */
+	pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);		/* LED2 */
+
+#ifdef CONFIG_MACH_TRIZEPS4_CONXS
+#ifdef CONFIG_IDE_PXA_CF
+	/* if boot direct from compact flash dont disable power */
+	trizeps_conxs_bcr = 0x0009;
+#else
+	/* this is the reset value */
+	trizeps_conxs_bcr = 0x00A0;
+#endif
+	ConXS_BCR = trizeps_conxs_bcr;
+#endif
+
+	PWER  = 0x00000002;
+	PFER  = 0x00000000;
+	PRER  = 0x00000002;
+	PGSR0 = 0x0158C000;
+	PGSR1 = 0x00FF0080;
+	PGSR2 = 0x0001C004;
+	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
+	PCFR |= PCFR_OPDE;
+}
+
+MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
+	/* MAINTAINER("Jürgen Schindele") */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= TRIZEPS4_SDRAM_BASE + 0x100,
+	.fixup		= trizeps4_fixup,
+	.init_machine	= trizeps4_init,
+	.map_io		= trizeps4_map_io,
+	.init_irq	= pxa_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+

arch/arm/mach-sa1100/cpu-sa1110.c

@@ -15,7 +15,10 @@
  *      SDRAM reads (rev A0, B0, B1)
  *
  * We ignore rev. A0 and B0 devices; I don't think they're worth supporting.
+ *
+ * The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type
  */
+#include <linux/moduleparam.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -35,6 +38,7 @@
 static struct cpufreq_driver sa1110_driver;
 
 struct sdram_params {
+	const char name[16];
 	u_char  rows;		/* bits				 */
 	u_char  cas_latency;	/* cycles			 */
 	u_char  tck;		/* clock cycle time (ns)	 */
@@ -50,54 +54,53 @@ struct sdram_info {
 	u_int	mdcas[3];
 };
 
-static struct sdram_params tc59sm716_cl2_params __initdata = {
-	.rows			= 12,
-	.tck			= 10,
-	.trcd			= 20,
-	.trp			= 20,
-	.twr			= 10,
-	.refresh		= 64000,
-	.cas_latency		= 2,
-};
-
-static struct sdram_params tc59sm716_cl3_params __initdata = {
-	.rows			= 12,
-	.tck			= 8,
-	.trcd			= 20,
-	.trp			= 20,
-	.twr			= 8,
-	.refresh		= 64000,
-	.cas_latency		= 3,
-};
-
-static struct sdram_params samsung_k4s641632d_tc75 __initdata = {
-	.rows			= 14,
-	.tck			= 9,
-	.trcd			= 27,
-	.trp			= 20,
-	.twr			= 9,
-	.refresh		= 64000,
-	.cas_latency		= 3,
-};
-
-static struct sdram_params samsung_km416s4030ct __initdata = {
-	.rows			= 13,
-	.tck			= 8,
-	.trcd			= 24,	/* 3 CLKs */
-	.trp			= 24,	/* 3 CLKs */
-	.twr			= 16,	/* Trdl: 2 CLKs */
-	.refresh		= 64000,
-	.cas_latency		= 3,
-};
-
-static struct sdram_params wbond_w982516ah75l_cl3_params __initdata = {
-	.rows			= 16,
-	.tck			= 8,
-	.trcd			= 20,
-	.trp			= 20,
-	.twr			= 8,
-	.refresh		= 64000,
-	.cas_latency		= 3,
+static struct sdram_params sdram_tbl[] __initdata = {
+	{	/* Toshiba TC59SM716 CL2 */
+		.name		= "TC59SM716-CL2",
+		.rows		= 12,
+		.tck		= 10,
+		.trcd		= 20,
+		.trp		= 20,
+		.twr		= 10,
+		.refresh	= 64000,
+		.cas_latency	= 2,
+	}, {	/* Toshiba TC59SM716 CL3 */
+		.name		= "TC59SM716-CL3",
+		.rows		= 12,
+		.tck		= 8,
+		.trcd		= 20,
+		.trp		= 20,
+		.twr		= 8,
+		.refresh	= 64000,
+		.cas_latency	= 3,
+	}, {	/* Samsung K4S641632D TC75 */
+		.name		= "K4S641632D",
+		.rows		= 14,
+		.tck		= 9,
+		.trcd		= 27,
+		.trp		= 20,
+		.twr		= 9,
+		.refresh	= 64000,
+		.cas_latency	= 3,
+	}, {	/* Samsung KM416S4030CT */
+		.name		= "KM416S4030CT",
+		.rows		= 13,
+		.tck		= 8,
+		.trcd		= 24,	/* 3 CLKs */
+		.trp		= 24,	/* 3 CLKs */
+		.twr		= 16,	/* Trdl: 2 CLKs */
+		.refresh	= 64000,
+		.cas_latency	= 3,
+	}, {	/* Winbond W982516AH75L CL3 */
+		.name		= "W982516AH75L",
+		.rows		= 16,
+		.tck		= 8,
+		.trcd		= 20,
+		.trp		= 20,
+		.twr		= 8,
+		.refresh	= 64000,
+		.cas_latency	= 3,
+	},
 };
 
 static struct sdram_params sdram_params;
@@ -336,19 +339,36 @@ static struct cpufreq_driver sa1110_driver = {
 	.name		= "sa1110",
 };
 
+static struct sdram_params *sa1110_find_sdram(const char *name)
+{
+	struct sdram_params *sdram;
+
+	for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl); sdram++)
+		if (strcmp(name, sdram->name) == 0)
+			return sdram;
+
+	return NULL;
+}
+
+static char sdram_name[16];
+
 static int __init sa1110_clk_init(void)
 {
-	struct sdram_params *sdram = NULL;
+	struct sdram_params *sdram;
+	const char *name = sdram_name;
 
-	if (machine_is_assabet())
-		sdram = &tc59sm716_cl3_params;
+	if (!name[0]) {
+		if (machine_is_assabet())
+			name = "TC59SM716-CL3";
 
-	if (machine_is_pt_system3())
-		sdram = &samsung_k4s641632d_tc75;
+		if (machine_is_pt_system3())
+			name = "K4S641632D";
 
-	if (machine_is_h3100())
-		sdram = &samsung_km416s4030ct;
+		if (machine_is_h3100())
+			name = "KM416S4030CT";
+	}
 
+	sdram = sa1110_find_sdram(name);
 	if (sdram) {
 		printk(KERN_DEBUG "SDRAM: tck: %d trcd: %d trp: %d"
 			" twr: %d refresh: %d cas_latency: %d\n",
@@ -363,4 +383,5 @@ static int __init sa1110_clk_init(void)
 	return 0;
 }
 
+module_param_string(sdram, sdram_name, sizeof(sdram_name), 0);
 arch_initcall(sa1110_clk_init);

arch/arm/mm/Kconfig

@@ -121,8 +121,8 @@ config CPU_ARM925T
 # ARM926T
 config CPU_ARM926T
 	bool "Support ARM926T processor"
-	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412
-	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412
+	depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || MACH_REALVIEW_EB || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
+	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || ARCH_OMAP730 || ARCH_OMAP16XX || ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_AT91SAM9260 || ARCH_AT91SAM9261
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
 	select CPU_CACHE_VIVT

arch/arm/mm/ioremap.c

@@ -27,7 +27,16 @@
 
 #include <asm/cacheflush.h>
 #include <asm/io.h>
+#include <asm/mmu_context.h>
+#include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
+#include <asm/sizes.h>
+
+/*
+ * Used by ioremap() and iounmap() code to mark (super)section-mapped
+ * I/O regions in vm_struct->flags field.
+ */
+#define VM_ARM_SECTION_MAPPING	0x80000000
 
 static inline void
 remap_area_pte(pte_t * pte, unsigned long address, unsigned long size,
@@ -113,10 +122,168 @@ remap_area_pages(unsigned long start, unsigned long pfn,
 		dir++;
 	} while (address && (address < end));
 
-	flush_cache_vmap(start, end);
 	return err;
 }
 
+
+void __check_kvm_seq(struct mm_struct *mm)
+{
+	unsigned int seq;
+
+	do {
+		seq = init_mm.context.kvm_seq;
+		memcpy(pgd_offset(mm, VMALLOC_START),
+		       pgd_offset_k(VMALLOC_START),
+		       sizeof(pgd_t) * (pgd_index(VMALLOC_END) -
+					pgd_index(VMALLOC_START)));
+		mm->context.kvm_seq = seq;
+	} while (seq != init_mm.context.kvm_seq);
+}
+
+#ifndef CONFIG_SMP
+/*
+ * Section support is unsafe on SMP - If you iounmap and ioremap a region,
+ * the other CPUs will not see this change until their next context switch.
+ * Meanwhile, (eg) if an interrupt comes in on one of those other CPUs
+ * which requires the new ioremap'd region to be referenced, the CPU will
+ * reference the _old_ region.
+ *
+ * Note that get_vm_area() allocates a guard 4K page, so we need to mask
+ * the size back to 1MB aligned or we will overflow in the loop below.
+ */
+static void unmap_area_sections(unsigned long virt, unsigned long size)
+{
+	unsigned long addr = virt, end = virt + (size & ~SZ_1M);
+	pgd_t *pgd;
+
+	flush_cache_vunmap(addr, end);
+	pgd = pgd_offset_k(addr);
+	do {
+		pmd_t pmd, *pmdp = pmd_offset(pgd, addr);
+
+		pmd = *pmdp;
+		if (!pmd_none(pmd)) {
+			/*
+			 * Clear the PMD from the page table, and
+			 * increment the kvm sequence so others
+			 * notice this change.
+			 *
+			 * Note: this is still racy on SMP machines.
+			 */
+			pmd_clear(pmdp);
+			init_mm.context.kvm_seq++;
+
+			/*
+			 * Free the page table, if there was one.
+			 */
+			if ((pmd_val(pmd) & PMD_TYPE_MASK) == PMD_TYPE_TABLE)
+				pte_free_kernel(pmd_page_kernel(pmd));
+		}
+
+		addr += PGDIR_SIZE;
+		pgd++;
+	} while (addr < end);
+
+	/*
+	 * Ensure that the active_mm is up to date - we want to
+	 * catch any use-after-iounmap cases.
+	 */
+	if (current->active_mm->context.kvm_seq != init_mm.context.kvm_seq)
+		__check_kvm_seq(current->active_mm);
+
+	flush_tlb_kernel_range(virt, end);
+}
+
+static int
+remap_area_sections(unsigned long virt, unsigned long pfn,
+		    unsigned long size, unsigned long flags)
+{
+	unsigned long prot, addr = virt, end = virt + size;
+	pgd_t *pgd;
+
+	/*
+	 * Remove and free any PTE-based mapping, and
+	 * sync the current kernel mapping.
+	 */
+	unmap_area_sections(virt, size);
+
+	prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_DOMAIN(DOMAIN_IO) |
+	       (flags & (L_PTE_CACHEABLE | L_PTE_BUFFERABLE));
+
+	/*
+	 * ARMv6 and above need XN set to prevent speculative prefetches
+	 * hitting IO.
+	 */
+	if (cpu_architecture() >= CPU_ARCH_ARMv6)
+		prot |= PMD_SECT_XN;
+
+	pgd = pgd_offset_k(addr);
+	do {
+		pmd_t *pmd = pmd_offset(pgd, addr);
+
+		pmd[0] = __pmd(__pfn_to_phys(pfn) | prot);
+		pfn += SZ_1M >> PAGE_SHIFT;
+		pmd[1] = __pmd(__pfn_to_phys(pfn) | prot);
+		pfn += SZ_1M >> PAGE_SHIFT;
+		flush_pmd_entry(pmd);
+
+		addr += PGDIR_SIZE;
+		pgd++;
+	} while (addr < end);
+
+	return 0;
+}
+
+static int
+remap_area_supersections(unsigned long virt, unsigned long pfn,
+			 unsigned long size, unsigned long flags)
+{
+	unsigned long prot, addr = virt, end = virt + size;
+	pgd_t *pgd;
+
+	/*
+	 * Remove and free any PTE-based mapping, and
+	 * sync the current kernel mapping.
+	 */
+	unmap_area_sections(virt, size);
+
+	prot = PMD_TYPE_SECT | PMD_SECT_SUPER | PMD_SECT_AP_WRITE |
+			PMD_DOMAIN(DOMAIN_IO) |
+			(flags & (L_PTE_CACHEABLE | L_PTE_BUFFERABLE));
+
+	/*
+	 * ARMv6 and above need XN set to prevent speculative prefetches
+	 * hitting IO.
+	 */
+	if (cpu_architecture() >= CPU_ARCH_ARMv6)
+		prot |= PMD_SECT_XN;
+
+	pgd = pgd_offset_k(virt);
+	do {
+		unsigned long super_pmd_val, i;
+
+		super_pmd_val = __pfn_to_phys(pfn) | prot;
+		super_pmd_val |= ((pfn >> (32 - PAGE_SHIFT)) & 0xf) << 20;
+
+		for (i = 0; i < 8; i++) {
+			pmd_t *pmd = pmd_offset(pgd, addr);
+
+			pmd[0] = __pmd(super_pmd_val);
+			pmd[1] = __pmd(super_pmd_val);
+			flush_pmd_entry(pmd);
+
+			addr += PGDIR_SIZE;
+			pgd++;
+		}
+
+		pfn += SUPERSECTION_SIZE >> PAGE_SHIFT;
+	} while (addr < end);
+
+	return 0;
+}
+#endif
+
+
 /*
  * Remap an arbitrary physical address space into the kernel virtual
  * address space. Needed when the kernel wants to access high addresses
@@ -133,18 +300,42 @@ void __iomem *
 __ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
 	      unsigned long flags)
 {
+	int err;
 	unsigned long addr;
  	struct vm_struct * area;
+	unsigned int cr = get_cr();
+
+	/*
+	 * High mappings must be supersection aligned
+	 */
+	if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
+		return NULL;
 
  	area = get_vm_area(size, VM_IOREMAP);
  	if (!area)
  		return NULL;
  	addr = (unsigned long)area->addr;
- 	if (remap_area_pages(addr, pfn, size, flags)) {
+
+#ifndef CONFIG_SMP
+	if ((((cpu_architecture() >= CPU_ARCH_ARMv6) && (cr & CR_XP)) ||
+	       cpu_is_xsc3()) &&
+	       !((__pfn_to_phys(pfn) | size | addr) & ~SUPERSECTION_MASK)) {
+		area->flags |= VM_ARM_SECTION_MAPPING;
+		err = remap_area_supersections(addr, pfn, size, flags);
+	} else if (!((__pfn_to_phys(pfn) | size | addr) & ~PMD_MASK)) {
+		area->flags |= VM_ARM_SECTION_MAPPING;
+		err = remap_area_sections(addr, pfn, size, flags);
+	} else
+#endif
+		err = remap_area_pages(addr, pfn, size, flags);
+
+	if (err) {
  		vunmap((void *)addr);
  		return NULL;
  	}
- 	return (void __iomem *) (offset + (char *)addr);
+
+	flush_cache_vmap(addr, addr + size);
+	return (void __iomem *) (offset + addr);
 }
 EXPORT_SYMBOL(__ioremap_pfn);
 
@@ -173,6 +364,34 @@ EXPORT_SYMBOL(__ioremap);
 
 void __iounmap(void __iomem *addr)
 {
-	vunmap((void *)(PAGE_MASK & (unsigned long)addr));
+	struct vm_struct **p, *tmp;
+	unsigned int section_mapping = 0;
+
+	addr = (void __iomem *)(PAGE_MASK & (unsigned long)addr);
+
+	/*
+	 * If this is a section based mapping we need to handle it
+	 * specially as the VM subysystem does not know how to handle
+	 * such a beast. We need the lock here b/c we need to clear
+	 * all the mappings before the area can be reclaimed
+	 * by someone else.
+	 */
+	write_lock(&vmlist_lock);
+	for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) {
+		if((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) {
+			if (tmp->flags & VM_ARM_SECTION_MAPPING) {
+				*p = tmp->next;
+				unmap_area_sections((unsigned long)tmp->addr,
+						    tmp->size);
+				kfree(tmp);
+				section_mapping = 1;
+			}
+			break;
+		}
+	}
+	write_unlock(&vmlist_lock);
+
+	if (!section_mapping)
+		vunmap(addr);
 }
 EXPORT_SYMBOL(__iounmap);

arch/arm/mm/mm-armv.c

@@ -302,16 +302,16 @@ static struct mem_types mem_types[] __initdata = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 				L_PTE_WRITE,
 		.prot_l1   = PMD_TYPE_TABLE,
-		.prot_sect = PMD_TYPE_SECT | PMD_SECT_UNCACHED |
+		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
 				PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_IO,
 	},
 	[MT_CACHECLEAN] = {
-		.prot_sect = PMD_TYPE_SECT,
+		.prot_sect = PMD_TYPE_SECT | PMD_BIT4,
 		.domain    = DOMAIN_KERNEL,
 	},
 	[MT_MINICLEAN] = {
-		.prot_sect = PMD_TYPE_SECT | PMD_SECT_MINICACHE,
+		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_MINICACHE,
 		.domain    = DOMAIN_KERNEL,
 	},
 	[MT_LOW_VECTORS] = {
@@ -327,25 +327,25 @@ static struct mem_types mem_types[] __initdata = {
 		.domain    = DOMAIN_USER,
 	},
 	[MT_MEMORY] = {
-		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE,
+		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_KERNEL,
 	},
 	[MT_ROM] = {
-		.prot_sect = PMD_TYPE_SECT,
+		.prot_sect = PMD_TYPE_SECT | PMD_BIT4,
 		.domain    = DOMAIN_KERNEL,
 	},
 	[MT_IXP2000_DEVICE] = { /* IXP2400 requires XCB=101 for on-chip I/O */
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
 				L_PTE_WRITE,
 		.prot_l1   = PMD_TYPE_TABLE,
-		.prot_sect = PMD_TYPE_SECT | PMD_SECT_UNCACHED |
+		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_UNCACHED |
 				PMD_SECT_AP_WRITE | PMD_SECT_BUFFERABLE |
 				PMD_SECT_TEX(1),
 		.domain    = DOMAIN_IO,
 	},
 	[MT_NONSHARED_DEVICE] = {
 		.prot_l1   = PMD_TYPE_TABLE,
-		.prot_sect = PMD_TYPE_SECT | PMD_SECT_NONSHARED_DEV |
+		.prot_sect = PMD_TYPE_SECT | PMD_BIT4 | PMD_SECT_NONSHARED_DEV |
 				PMD_SECT_AP_WRITE,
 		.domain    = DOMAIN_IO,
 	}
@@ -375,14 +375,21 @@ void __init build_mem_type_table(void)
 		ecc_mask = 0;
 	}
 
-	if (cpu_arch <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) {
-		for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
+	/*
+	 * Xscale must not have PMD bit 4 set for section mappings.
+	 */
+	if (cpu_is_xscale())
+		for (i = 0; i < ARRAY_SIZE(mem_types); i++)
+			mem_types[i].prot_sect &= ~PMD_BIT4;
+
+	/*
+	 * ARMv5 and lower, excluding Xscale, bit 4 must be set for
+	 * page tables.
+	 */
+	if (cpu_arch < CPU_ARCH_ARMv6 && !cpu_is_xscale())
+		for (i = 0; i < ARRAY_SIZE(mem_types); i++)
 			if (mem_types[i].prot_l1)
 				mem_types[i].prot_l1 |= PMD_BIT4;
-			if (mem_types[i].prot_sect)
-				mem_types[i].prot_sect |= PMD_BIT4;
-		}
-	}
 
 	cp = &cache_policies[cachepolicy];
 	kern_pgprot = user_pgprot = cp->pte;
@@ -406,8 +413,8 @@ void __init build_mem_type_table(void)
 		 * bit 4 becomes XN which we must clear for the
 		 * kernel memory mapping.
 		 */
-		mem_types[MT_MEMORY].prot_sect &= ~PMD_BIT4;
-		mem_types[MT_ROM].prot_sect &= ~PMD_BIT4;
+		mem_types[MT_MEMORY].prot_sect &= ~PMD_SECT_XN;
+		mem_types[MT_ROM].prot_sect &= ~PMD_SECT_XN;
 
 		/*
 		 * Mark cache clean areas and XIP ROM read only

arch/arm/mm/proc-arm1020.S

@@ -439,11 +439,12 @@ __arm1020_setup:
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
 #endif
+
+	adr	r5, arm1020_crval
+	ldmia	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	ldr	r5, arm1020_cr1_clear
 	bic	r0, r0, r5
-	ldr	r5, arm1020_cr1_set
-	orr	r0, r0, r5
+	orr	r0, r0, r6
 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
 	orr	r0, r0, #0x4000 		@ .R.. .... .... ....
 #endif
@@ -455,12 +456,9 @@ __arm1020_setup:
 	 * .RVI ZFRS BLDP WCAM
 	 * .011 1001 ..11 0101
 	 */
-	.type	arm1020_cr1_clear, #object
-	.type	arm1020_cr1_set, #object
-arm1020_cr1_clear:
-	.word	0x593f
-arm1020_cr1_set:
-	.word	0x3935
+	.type	arm1020_crval, #object
+arm1020_crval:
+	crval	clear=0x0000593f, mmuset=0x00003935, ucset=0x00001930
 
 	__INITDATA
 
@@ -523,6 +521,9 @@ cpu_arm1020_name:
 __arm1020_proc_info:
 	.long	0x4104a200			@ ARM 1020T (Architecture v5T)
 	.long	0xff0ffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ

arch/arm/mm/proc-arm1020e.S

@@ -421,11 +421,11 @@ __arm1020e_setup:
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
 #endif
+	adr	r5, arm1020e_crval
+	ldmia	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	ldr	r5, arm1020e_cr1_clear
 	bic	r0, r0, r5
-	ldr	r5, arm1020e_cr1_set
-	orr	r0, r0, r5
+	orr	r0, r0, r6
 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
 	orr	r0, r0, #0x4000 		@ .R.. .... .... ....
 #endif
@@ -437,12 +437,9 @@ __arm1020e_setup:
 	 * .RVI ZFRS BLDP WCAM
 	 * .011 1001 ..11 0101
 	 */
-	.type	arm1020e_cr1_clear, #object
-	.type	arm1020e_cr1_set, #object
-arm1020e_cr1_clear:
-	.word	0x5f3f
-arm1020e_cr1_set:
-	.word	0x3935
+	.type	arm1020e_crval, #object
+arm1020e_crval:
+	crval	clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
 
 	__INITDATA
 
@@ -476,25 +473,7 @@ cpu_elf_name:
 
 	.type	cpu_arm1020e_name, #object
 cpu_arm1020e_name:
-	.ascii	"ARM1020E"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	.ascii	"i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	.ascii	"d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	.ascii	"(wt)"
-#else
-	.ascii	"(wb)"
-#endif
-#endif
-#ifndef CONFIG_CPU_BPREDICT_DISABLE
-	.ascii	"B"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
-	.ascii	"RR"
-#endif
-	.ascii	"\0"
+	.asciz	"ARM1020E"
 	.size	cpu_arm1020e_name, . - cpu_arm1020e_name
 
 	.align
@@ -505,6 +484,10 @@ cpu_arm1020e_name:
 __arm1020e_proc_info:
 	.long	0x4105a200			@ ARM 1020TE (Architecture v5TE)
 	.long	0xff0ffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	.long   PMD_TYPE_SECT | \
 		PMD_BIT4 | \
 		PMD_SECT_AP_WRITE | \

arch/arm/mm/proc-arm1022.S

@@ -403,11 +403,11 @@ __arm1022_setup:
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
 #endif
+	adr	r5, arm1022_crval
+	ldmia	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	ldr	r5, arm1022_cr1_clear
 	bic	r0, r0, r5
-	ldr	r5, arm1022_cr1_set
-	orr	r0, r0, r5
+	orr	r0, r0, r6
 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
 	orr	r0, r0, #0x4000 		@ .R..............
 #endif
@@ -420,12 +420,9 @@ __arm1022_setup:
 	 * .011 1001 ..11 0101
 	 * 
 	 */
-	.type	arm1022_cr1_clear, #object
-	.type	arm1022_cr1_set, #object
-arm1022_cr1_clear:
-	.word	0x7f3f
-arm1022_cr1_set:
-	.word	0x3935
+	.type	arm1022_crval, #object
+arm1022_crval:
+	crval	clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
 
 	__INITDATA
 
@@ -459,25 +456,7 @@ cpu_elf_name:
 
 	.type	cpu_arm1022_name, #object
 cpu_arm1022_name:
-	.ascii	"arm1022"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	.ascii	"i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	.ascii	"d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	.ascii	"(wt)"
-#else
-	.ascii	"(wb)"
-#endif
-#endif
-#ifndef CONFIG_CPU_BPREDICT_DISABLE
-	.ascii	"B"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
-	.ascii	"RR"
-#endif
-	.ascii	"\0"
+	.asciz	"ARM1022"
 	.size	cpu_arm1022_name, . - cpu_arm1022_name
 
 	.align
@@ -488,6 +467,10 @@ cpu_arm1022_name:
 __arm1022_proc_info:
 	.long	0x4105a220			@ ARM 1022E (v5TE)
 	.long	0xff0ffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	.long   PMD_TYPE_SECT | \
 		PMD_BIT4 | \
 		PMD_SECT_AP_WRITE | \

arch/arm/mm/proc-arm1026.S

@@ -398,11 +398,11 @@ __arm1026_setup:
 	mov	r0, #4				@ explicitly disable writeback
 	mcr	p15, 7, r0, c15, c0, 0
 #endif
+	adr	r5, arm1026_crval
+	ldmia	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	ldr	r5, arm1026_cr1_clear
 	bic	r0, r0, r5
-	ldr	r5, arm1026_cr1_set
-	orr	r0, r0, r5
+	orr	r0, r0, r6
 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
 	orr	r0, r0, #0x4000 		@ .R.. .... .... ....
 #endif
@@ -415,12 +415,9 @@ __arm1026_setup:
 	 * .011 1001 ..11 0101
 	 * 
 	 */
-	.type	arm1026_cr1_clear, #object
-	.type	arm1026_cr1_set, #object
-arm1026_cr1_clear:
-	.word	0x7f3f
-arm1026_cr1_set:
-	.word	0x3935
+	.type	arm1026_crval, #object
+arm1026_crval:
+	crval	clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001934
 
 	__INITDATA
 
@@ -455,25 +452,7 @@ cpu_elf_name:
 
 	.type	cpu_arm1026_name, #object
 cpu_arm1026_name:
-	.ascii	"ARM1026EJ-S"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	.ascii	"i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	.ascii	"d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	.ascii	"(wt)"
-#else
-	.ascii	"(wb)"
-#endif
-#endif
-#ifndef CONFIG_CPU_BPREDICT_DISABLE
-	.ascii	"B"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
-	.ascii	"RR"
-#endif
-	.ascii	"\0"
+	.asciz	"ARM1026EJ-S"
 	.size	cpu_arm1026_name, . - cpu_arm1026_name
 
 	.align
@@ -484,6 +463,10 @@ cpu_arm1026_name:
 __arm1026_proc_info:
 	.long	0x4106a260			@ ARM 1026EJ-S (v5TEJ)
 	.long	0xff0ffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	.long   PMD_TYPE_SECT | \
 		PMD_BIT4 | \
 		PMD_SECT_AP_WRITE | \

arch/arm/mm/proc-arm6_7.S

@@ -355,6 +355,10 @@ __arm6_proc_info:
 		.long	0x41560600
 		.long	0xfffffff0
 		.long	0x00000c1e
+		.long   PMD_TYPE_SECT | \
+			PMD_BIT4 | \
+			PMD_SECT_AP_WRITE | \
+			PMD_SECT_AP_READ
 		b	__arm6_setup
 		.long	cpu_arch_name
 		.long	cpu_elf_name
@@ -371,6 +375,10 @@ __arm610_proc_info:
 		.long	0x41560610
 		.long	0xfffffff0
 		.long	0x00000c1e
+		.long   PMD_TYPE_SECT | \
+			PMD_BIT4 | \
+			PMD_SECT_AP_WRITE | \
+			PMD_SECT_AP_READ
 		b	__arm6_setup
 		.long	cpu_arch_name
 		.long	cpu_elf_name
@@ -387,6 +395,10 @@ __arm7_proc_info:
 		.long	0x41007000
 		.long	0xffffff00
 		.long	0x00000c1e
+		.long   PMD_TYPE_SECT | \
+			PMD_BIT4 | \
+			PMD_SECT_AP_WRITE | \
+			PMD_SECT_AP_READ
 		b	__arm7_setup
 		.long	cpu_arch_name
 		.long	cpu_elf_name
@@ -408,6 +420,10 @@ __arm710_proc_info:
 			PMD_BIT4 | \
 			PMD_SECT_AP_WRITE | \
 			PMD_SECT_AP_READ
+		.long   PMD_TYPE_SECT | \
+			PMD_BIT4 | \
+			PMD_SECT_AP_WRITE | \
+			PMD_SECT_AP_READ
 		b	__arm7_setup
 		.long	cpu_arch_name
 		.long	cpu_elf_name

arch/arm/mm/proc-arm720.S

@@ -169,11 +169,11 @@ __arm720_setup:
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r0, c8, c7, 0		@ flush TLB (v4)
 #endif
+	adr	r5, arm720_crval
+	ldmia	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0		@ get control register
-	ldr	r5, arm720_cr1_clear
 	bic	r0, r0, r5
-	ldr	r5, arm720_cr1_set
-	orr	r0, r0, r5
+	orr	r0, r0, r6
 	mov	pc, lr				@ __ret (head.S)
 	.size	__arm720_setup, . - __arm720_setup
 
@@ -183,12 +183,9 @@ __arm720_setup:
 	 * ..1. 1001 ..11 1101
 	 * 
 	 */
-	.type	arm720_cr1_clear, #object
-	.type	arm720_cr1_set, #object
-arm720_cr1_clear:
-	.word	0x2f3f
-arm720_cr1_set:
-	.word	0x213d
+	.type	arm720_crval, #object
+arm720_crval:
+	crval	clear=0x00002f3f, mmuset=0x0000213d, ucset=0x00000130
 
 		__INITDATA
 
@@ -246,6 +243,10 @@ __arm710_proc_info:
 			PMD_BIT4 | \
 			PMD_SECT_AP_WRITE | \
 			PMD_SECT_AP_READ
+		.long   PMD_TYPE_SECT | \
+			PMD_BIT4 | \
+			PMD_SECT_AP_WRITE | \
+			PMD_SECT_AP_READ
 		b	__arm710_setup				@ cpu_flush
 		.long	cpu_arch_name				@ arch_name
 		.long	cpu_elf_name				@ elf_name
@@ -267,6 +268,10 @@ __arm720_proc_info:
 			PMD_BIT4 | \
 			PMD_SECT_AP_WRITE | \
 			PMD_SECT_AP_READ
+		.long   PMD_TYPE_SECT | \
+			PMD_BIT4 | \
+			PMD_SECT_AP_WRITE | \
+			PMD_SECT_AP_READ
 		b	__arm720_setup				@ cpu_flush
 		.long	cpu_arch_name				@ arch_name
 		.long	cpu_elf_name				@ elf_name

arch/arm/mm/proc-arm920.S

@@ -390,11 +390,11 @@ __arm920_setup:
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
 #endif
+	adr	r5, arm920_crval
+	ldmia	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	ldr	r5, arm920_cr1_clear
 	bic	r0, r0, r5
-	ldr	r5, arm920_cr1_set
-	orr	r0, r0, r5
+	orr	r0, r0, r6
 	mov	pc, lr
 	.size	__arm920_setup, . - __arm920_setup
 
@@ -404,12 +404,9 @@ __arm920_setup:
 	 * ..11 0001 ..11 0101
 	 * 
 	 */
-	.type	arm920_cr1_clear, #object
-	.type	arm920_cr1_set, #object
-arm920_cr1_clear:
-	.word	0x3f3f
-arm920_cr1_set:
-	.word	0x3135
+	.type	arm920_crval, #object
+arm920_crval:
+	crval	clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130
 
 	__INITDATA
 
@@ -443,19 +440,7 @@ cpu_elf_name:
 
 	.type	cpu_arm920_name, #object
 cpu_arm920_name:
-	.ascii	"ARM920T"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	.ascii	"i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	.ascii	"d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	.ascii	"(wt)"
-#else
-	.ascii	"(wb)"
-#endif
-#endif
-	.ascii	"\0"
+	.asciz	"ARM920T"
 	.size	cpu_arm920_name, . - cpu_arm920_name
 
 	.align
@@ -472,6 +457,10 @@ __arm920_proc_info:
 		PMD_BIT4 | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b	__arm920_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name

arch/arm/mm/proc-arm922.S

@@ -394,11 +394,11 @@ __arm922_setup:
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
 #endif
+	adr	r5, arm922_crval
+	ldmia	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	ldr	r5, arm922_cr1_clear
 	bic	r0, r0, r5
-	ldr	r5, arm922_cr1_set
-	orr	r0, r0, r5
+	orr	r0, r0, r6
 	mov	pc, lr
 	.size	__arm922_setup, . - __arm922_setup
 
@@ -408,12 +408,9 @@ __arm922_setup:
 	 * ..11 0001 ..11 0101
 	 * 
 	 */
-	.type	arm922_cr1_clear, #object
-	.type	arm922_cr1_set, #object
-arm922_cr1_clear:
-	.word	0x3f3f
-arm922_cr1_set:
-	.word	0x3135
+	.type	arm922_crval, #object
+arm922_crval:
+	crval	clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130
 
 	__INITDATA
 
@@ -447,19 +444,7 @@ cpu_elf_name:
 
 	.type	cpu_arm922_name, #object
 cpu_arm922_name:
-	.ascii	"ARM922T"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	.ascii	"i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	.ascii	"d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	.ascii	"(wt)"
-#else
-	.ascii	"(wb)"
-#endif
-#endif
-	.ascii	"\0"
+	.asciz	"ARM922T"
 	.size	cpu_arm922_name, . - cpu_arm922_name
 
 	.align
@@ -476,6 +461,10 @@ __arm922_proc_info:
 		PMD_BIT4 | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b	__arm922_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name

arch/arm/mm/proc-arm925.S

@@ -454,11 +454,10 @@ __arm925_setup:
 	mcr	p15, 7, r0, c15, c0, 0
 #endif
 
+	adr	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	ldr	r5, arm925_cr1_clear
 	bic	r0, r0, r5
-	ldr	r5, arm925_cr1_set
-	orr	r0, r0, r5
+	orr	r0, r0, r6
 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
 	orr	r0, r0, #0x4000			@ .1.. .... .... ....
 #endif
@@ -471,12 +470,9 @@ __arm925_setup:
 	 * .011 0001 ..11 1101
 	 * 
 	 */
-	.type	arm925_cr1_clear, #object
-	.type	arm925_cr1_set, #object
-arm925_cr1_clear:
-	.word	0x7f3f
-arm925_cr1_set:
-	.word	0x313d
+	.type	arm925_crval, #object
+arm925_crval:
+	crval	clear=0x00007f3f, mmuset=0x0000313d, ucset=0x00001130
 
 	__INITDATA
 
@@ -510,22 +506,7 @@ cpu_elf_name:
 
 	.type	cpu_arm925_name, #object
 cpu_arm925_name:
-	.ascii	"ARM925T"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	.ascii	"i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	.ascii	"d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	.ascii	"(wt)"
-#else
-	.ascii	"(wb)"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
-	.ascii	"RR"
-#endif
-#endif
-	.ascii	"\0"
+	.asciz	"ARM925T"
 	.size	cpu_arm925_name, . - cpu_arm925_name
 
 	.align
@@ -536,6 +517,10 @@ cpu_arm925_name:
 __arm925_proc_info:
 	.long	0x54029250
 	.long	0xfffffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	.long   PMD_TYPE_SECT | \
 		PMD_BIT4 | \
 		PMD_SECT_AP_WRITE | \
@@ -555,6 +540,10 @@ __arm925_proc_info:
 __arm915_proc_info:
 	.long	0x54029150
 	.long	0xfffffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	.long   PMD_TYPE_SECT | \
 		PMD_BIT4 | \
 		PMD_SECT_AP_WRITE | \

arch/arm/mm/proc-arm926.S

@@ -403,11 +403,11 @@ __arm926_setup:
 	mcr	p15, 7, r0, c15, c0, 0
 #endif 
 
+	adr	r5, arm926_crval
+	ldmia	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	ldr	r5, arm926_cr1_clear
 	bic	r0, r0, r5
-	ldr	r5, arm926_cr1_set
-	orr	r0, r0, r5
+	orr	r0, r0, r6
 #ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
 	orr	r0, r0, #0x4000			@ .1.. .... .... ....
 #endif
@@ -420,12 +420,9 @@ __arm926_setup:
 	 * .011 0001 ..11 0101
 	 * 
 	 */
-	.type	arm926_cr1_clear, #object
-	.type	arm926_cr1_set, #object
-arm926_cr1_clear:
-	.word	0x7f3f
-arm926_cr1_set:
-	.word	0x3135
+	.type	arm926_crval, #object
+arm926_crval:
+	crval	clear=0x00007f3f, mmuset=0x00003135, ucset=0x00001134
 
 	__INITDATA
 
@@ -459,22 +456,7 @@ cpu_elf_name:
 
 	.type	cpu_arm926_name, #object
 cpu_arm926_name:
-	.ascii	"ARM926EJ-S"
-#ifndef CONFIG_CPU_ICACHE_DISABLE
-	.ascii	"i"
-#endif
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-	.ascii	"d"
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	.ascii	"(wt)"
-#else
-	.ascii	"(wb)"
-#endif
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
-	.ascii	"RR"
-#endif
-#endif
-	.ascii	"\0"
+	.asciz	"ARM926EJ-S"
 	.size	cpu_arm926_name, . - cpu_arm926_name
 
 	.align
@@ -491,6 +473,10 @@ __arm926_proc_info:
 		PMD_BIT4 | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_BIT4 | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b	__arm926_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name

arch/arm/mm/proc-macros.S

@@ -49,3 +49,13 @@
 	.macro	asid, rd, rn
 	and	\rd, \rn, #255
 	.endm
+
+	.macro	crval, clear, mmuset, ucset
+#ifdef CONFIG_MMU
+	.word	\clear
+	.word	\mmuset
+#else
+	.word	\clear
+	.word	\ucset
+#endif
+	.endm

arch/arm/mm/proc-sa110.S

@@ -185,11 +185,12 @@ __sa110_setup:
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r10, c8, c7		@ invalidate I,D TLBs on v4
 #endif
+
+	adr	r5, sa110_crval
+	ldmia	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	ldr	r5, sa110_cr1_clear
 	bic	r0, r0, r5
-	ldr	r5, sa110_cr1_set
-	orr	r0, r0, r5
+	orr	r0, r0, r6
 	mov	pc, lr
 	.size	__sa110_setup, . - __sa110_setup
 
@@ -199,12 +200,9 @@ __sa110_setup:
 	 * ..01 0001 ..11 1101
 	 * 
 	 */
-	.type	sa110_cr1_clear, #object
-	.type	sa110_cr1_set, #object
-sa110_cr1_clear:
-	.word	0x3f3f
-sa110_cr1_set:
-	.word	0x113d
+	.type	sa110_crval, #object
+sa110_crval:
+	crval	clear=0x00003f3f, mmuset=0x0000113d, ucset=0x00001130
 
 	__INITDATA
 
@@ -255,6 +253,9 @@ __sa110_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b	__sa110_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name

arch/arm/mm/proc-sa1100.S

@@ -198,11 +198,11 @@ __sa1100_setup:
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r0, c8, c7		@ invalidate I,D TLBs on v4
 #endif
+	adr	r5, sa1100_crval
+	ldmia	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0		@ get control register v4
-	ldr	r5, sa1100_cr1_clear
 	bic	r0, r0, r5
-	ldr	r5, sa1100_cr1_set
-	orr	r0, r0, r5
+	orr	r0, r0, r6
 	mov	pc, lr
 	.size	__sa1100_setup, . - __sa1100_setup
 
@@ -212,12 +212,9 @@ __sa1100_setup:
 	 * ..11 0001 ..11 1101
 	 * 
 	 */
-	.type	sa1100_cr1_clear, #object
-	.type	sa1100_cr1_set, #object
-sa1100_cr1_clear:
-	.word	0x3f3f
-sa1100_cr1_set:
-	.word	0x313d
+	.type	sa1100_crval, #object
+sa1100_crval:
+	crval	clear=0x00003f3f, mmuset=0x0000313d, ucset=0x00001130
 
 	__INITDATA
 
@@ -276,6 +273,9 @@ __sa1100_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b	__sa1100_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
@@ -296,6 +296,9 @@ __sa1110_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b	__sa1100_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name

arch/arm/mm/proc-v6.S

@@ -212,11 +212,11 @@ __v6_setup:
 	orr	r0, r0, #(0xf << 20)
 	mcr	p15, 0, r0, c1, c0, 2		@ Enable full access to VFP
 #endif
+	adr	r5, v6_crval
+	ldmia	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0, 0		@ read control register
-	ldr	r5, v6_cr1_clear		@ get mask for bits to clear
 	bic	r0, r0, r5			@ clear bits them
-	ldr	r5, v6_cr1_set			@ get mask for bits to set
-	orr	r0, r0, r5			@ set them
+	orr	r0, r0, r6			@ set them
 	mov	pc, lr				@ return to head.S:__ret
 
 	/*
@@ -225,12 +225,9 @@ __v6_setup:
 	 * rrrr rrrx xxx0 0101 xxxx xxxx x111 xxxx < forced
 	 *         0 110       0011 1.00 .111 1101 < we want
 	 */
-	.type	v6_cr1_clear, #object
-	.type	v6_cr1_set, #object
-v6_cr1_clear:
-	.word	0x01e0fb7f
-v6_cr1_set:
-	.word	0x00c0387d
+	.type	v6_crval, #object
+v6_crval:
+	crval	clear=0x01e0fb7f, mmuset=0x00c0387d, ucset=0x00c0187c
 
 	.type	v6_processor_functions, #object
 ENTRY(v6_processor_functions)
@@ -269,6 +266,10 @@ __v6_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_XN | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b	__v6_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name

arch/arm/mm/proc-xsc3.S

@@ -426,23 +426,26 @@ __xsc3_setup:
 	orr	r0, r0, #(1 << 10)		@ enable L2 for LLR cache
 #endif
 	mcr	p15, 0, r0, c1, c0, 1		@ set auxiliary control reg
+
+	adr	r5, xsc3_crval
+	ldmia	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0, 0		@ get control register
-	bic	r0, r0, #0x0002			@ .... .... .... ..A.
-	orr	r0, r0, #0x0005			@ .... .... .... .C.M
+	bic	r0, r0, r5			@ .... .... .... ..A.
+	orr	r0, r0, r6			@ .... .... .... .C.M
 #if BTB_ENABLE
-	bic	r0, r0, #0x0200			@ .... ..R. .... ....
-	orr	r0, r0, #0x3900			@ ..VI Z..S .... ....
-#else
-	bic	r0, r0, #0x0a00			@ .... Z.R. .... ....
-	orr	r0, r0, #0x3100			@ ..VI ...S .... ....
+	orr	r0, r0, #0x00000800		@ ..VI Z..S .... ....
 #endif
 #if L2_CACHE_ENABLE
-	orr 	r0, r0, #0x4000000		@ L2 enable
+	orr 	r0, r0, #0x04000000		@ L2 enable
 #endif
 	mov	pc, lr
 
 	.size	__xsc3_setup, . - __xsc3_setup
 
+	.type	xsc3_crval, #object
+xsc3_crval:
+	crval	clear=0x04003b02, mmuset=0x00003105, ucset=0x00001100
+
 	__INITDATA
 
 /*
@@ -487,7 +490,14 @@ cpu_xsc3_name:
 __xsc3_proc_info:
 	.long	0x69056000
 	.long	0xffffe000
-	.long	0x00000c0e
+	.long	PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b	__xsc3_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name

arch/arm/mm/proc-xscale.S

@@ -138,17 +138,23 @@ ENTRY(cpu_xscale_proc_fin)
  * to what would be the reset vector.
  *
  * loc: location to jump to for soft reset
+ *
+ * Beware PXA270 erratum E7.
  */
 	.align	5
 ENTRY(cpu_xscale_reset)
 	mov	r1, #PSR_F_BIT|PSR_I_BIT|SVC_MODE
 	msr	cpsr_c, r1			@ reset CPSR
+	mcr	p15, 0, r1, c10, c4, 1		@ unlock I-TLB
+	mcr	p15, 0, r1, c8, c5, 0		@ invalidate I-TLB
 	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
 	bic	r1, r1, #0x0086			@ ........B....CA.
 	bic	r1, r1, #0x3900			@ ..VIZ..S........
+	sub	pc, pc, #4			@ flush pipeline
+	@ *** cache line aligned ***
 	mcr	p15, 0, r1, c1, c0, 0		@ ctrl register
-	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches & BTB
 	bic	r1, r1, #0x0001			@ ...............M
+	mcr	p15, 0, ip, c7, c7, 0		@ invalidate I,D caches & BTB
 	mcr	p15, 0, r1, c1, c0, 0		@ ctrl register
 	@ CAUTION: MMU turned off from this point. We count on the pipeline
 	@ already containing those two last instructions to survive.
@@ -475,11 +481,12 @@ __xscale_setup:
 	orr     r0, r0, #1 << 6			@ cp6 for IOP3xx and Bulverde
 	orr	r0, r0, #1 << 13		@ Its undefined whether this
 	mcr	p15, 0, r0, c15, c1, 0		@ affects USR or SVC modes
+
+	adr	r5, xscale_crval
+	ldmia	r5, {r5, r6}
 	mrc	p15, 0, r0, c1, c0, 0		@ get control register
-	ldr	r5, xscale_cr1_clear
 	bic	r0, r0, r5
-	ldr	r5, xscale_cr1_set
-	orr	r0, r0, r5
+	orr	r0, r0, r6
 	mov	pc, lr
 	.size	__xscale_setup, . - __xscale_setup
 
@@ -489,12 +496,9 @@ __xscale_setup:
 	 * ..11 1.01 .... .101
 	 * 
 	 */
-	.type	xscale_cr1_clear, #object
-	.type	xscale_cr1_set, #object
-xscale_cr1_clear:
-	.word	0x3b07
-xscale_cr1_set:
-	.word	0x3905
+	.type	xscale_crval, #object
+xscale_crval:
+	crval	clear=0x00003b07, mmuset=0x00003905, ucset=0x00001900
 
 	__INITDATA
 
@@ -595,6 +599,9 @@ __80200_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b	__xscale_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
@@ -615,6 +622,9 @@ __8032x_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b	__xscale_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
@@ -635,6 +645,9 @@ __8033x_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b	__xscale_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
@@ -655,6 +668,9 @@ __pxa250_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b	__xscale_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
@@ -675,6 +691,9 @@ __pxa210_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b	__xscale_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
@@ -695,6 +714,9 @@ __ixp2400_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b       __xscale_setup
 	.long   cpu_arch_name
 	.long   cpu_elf_name
@@ -715,6 +737,9 @@ __ixp2800_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b       __xscale_setup
 	.long   cpu_arch_name
 	.long   cpu_elf_name
@@ -735,6 +760,9 @@ __ixp42x_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b       __xscale_setup
 	.long   cpu_arch_name
 	.long   cpu_elf_name
@@ -750,7 +778,14 @@ __ixp42x_proc_info:
 __ixp46x_proc_info:
 	.long   0x69054200
 	.long   0xffffff00
-	.long   0x00000c0e
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_BUFFERABLE | \
+		PMD_SECT_CACHEABLE | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b       __xscale_setup
 	.long   cpu_arch_name
 	.long   cpu_elf_name
@@ -771,6 +806,9 @@ __pxa255_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b	__xscale_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
@@ -791,6 +829,9 @@ __pxa270_proc_info:
 		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
 		PMD_SECT_AP_READ
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
 	b	__xscale_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name

arch/arm/plat-omap/Kconfig

@@ -91,7 +91,7 @@ config OMAP_32K_TIMER_HZ
 
 config OMAP_DM_TIMER
 	bool "Use dual-mode timer"
-	depends on ARCH_OMAP16XX
+	depends on ARCH_OMAP16XX || ARCH_OMAP24XX
 	help
 	 Select this option if you want to use OMAP Dual-Mode timers.
 

arch/arm/plat-omap/clock.c

@@ -27,9 +27,9 @@
 
 #include <asm/arch/clock.h>
 
-LIST_HEAD(clocks);
+static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
-DEFINE_SPINLOCK(clockfw_lock);
+static DEFINE_SPINLOCK(clockfw_lock);
 
 static struct clk_functions *arch_clock;
 

arch/arm/plat-omap/cpu-omap.c

@@ -25,6 +25,14 @@
 #include <asm/io.h>
 #include <asm/system.h>
 
+#define VERY_HI_RATE	900000000
+
+#ifdef CONFIG_ARCH_OMAP1
+#define MPU_CLK		"mpu"
+#else
+#define MPU_CLK		"virt_prcm_set"
+#endif
+
 /* TODO: Add support for SDRAM timing changes */
 
 int omap_verify_speed(struct cpufreq_policy *policy)
@@ -36,7 +44,7 @@ int omap_verify_speed(struct cpufreq_policy *policy)
 
 	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
 				     policy->cpuinfo.max_freq);
-	mpu_clk = clk_get(NULL, "mpu");
+	mpu_clk = clk_get(NULL, MPU_CLK);
 	if (IS_ERR(mpu_clk))
 		return PTR_ERR(mpu_clk);
 	policy->min = clk_round_rate(mpu_clk, policy->min * 1000) / 1000;
@@ -56,7 +64,7 @@ unsigned int omap_getspeed(unsigned int cpu)
 	if (cpu)
 		return 0;
 
-	mpu_clk = clk_get(NULL, "mpu");
+	mpu_clk = clk_get(NULL, MPU_CLK);
 	if (IS_ERR(mpu_clk))
 		return 0;
 	rate = clk_get_rate(mpu_clk) / 1000;
@@ -73,7 +81,7 @@ static int omap_target(struct cpufreq_policy *policy,
 	struct cpufreq_freqs freqs;
 	int ret = 0;
 
-	mpu_clk = clk_get(NULL, "mpu");
+	mpu_clk = clk_get(NULL, MPU_CLK);
 	if (IS_ERR(mpu_clk))
 		return PTR_ERR(mpu_clk);
 
@@ -93,7 +101,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
 {
 	struct clk * mpu_clk;
 
-	mpu_clk = clk_get(NULL, "mpu");
+	mpu_clk = clk_get(NULL, MPU_CLK);
 	if (IS_ERR(mpu_clk))
 		return PTR_ERR(mpu_clk);
 
@@ -102,7 +110,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
 	policy->cur = policy->min = policy->max = omap_getspeed(0);
 	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
 	policy->cpuinfo.min_freq = clk_round_rate(mpu_clk, 0) / 1000;
-	policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, 216000000) / 1000;
+	policy->cpuinfo.max_freq = clk_round_rate(mpu_clk, VERY_HI_RATE) / 1000;
 	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 	clk_put(mpu_clk);
 

arch/arm/plat-omap/devices.c

@@ -104,7 +104,7 @@ static void omap_init_kp(void)
 		omap_cfg_reg(E20_1610_KBR3);
 		omap_cfg_reg(E19_1610_KBR4);
 		omap_cfg_reg(N19_1610_KBR5);
-	} else if (machine_is_omap_perseus2()) {
+	} else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
 		omap_cfg_reg(E2_730_KBR0);
 		omap_cfg_reg(J7_730_KBR1);
 		omap_cfg_reg(E1_730_KBR2);
@@ -161,8 +161,8 @@ static u64 mmc1_dmamask = 0xffffffff;
 
 static struct resource mmc1_resources[] = {
 	{
-		.start		= IO_ADDRESS(OMAP_MMC1_BASE),
-		.end		= IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
+		.start		= OMAP_MMC1_BASE,
+		.end		= OMAP_MMC1_BASE + 0x7f,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
@@ -190,8 +190,8 @@ static u64 mmc2_dmamask = 0xffffffff;
 
 static struct resource mmc2_resources[] = {
 	{
-		.start		= IO_ADDRESS(OMAP_MMC2_BASE),
-		.end		= IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
+		.start		= OMAP_MMC2_BASE,
+		.end		= OMAP_MMC2_BASE + 0x7f,
 		.flags		= IORESOURCE_MEM,
 	},
 	{

arch/arm/plat-omap/dma.c

@@ -43,6 +43,7 @@
 
 #define OMAP_DMA_ACTIVE		0x01
 #define OMAP_DMA_CCR_EN		(1 << 7)
+#define OMAP2_DMA_CSR_CLEAR_MASK	0xffe
 
 #define OMAP_FUNC_MUX_ARM_BASE	(0xfffe1000 + 0xec)
 
@@ -166,18 +167,24 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
 	if (cpu_is_omap24xx() && dma_trigger) {
 		u32 val = OMAP_DMA_CCR_REG(lch);
 
+		val &= ~(3 << 19);
 		if (dma_trigger > 63)
 			val |= 1 << 20;
 		if (dma_trigger > 31)
 			val |= 1 << 19;
 
+		val &= ~(0x1f);
 		val |= (dma_trigger & 0x1f);
 
 		if (sync_mode & OMAP_DMA_SYNC_FRAME)
 			val |= 1 << 5;
+		else
+			val &= ~(1 << 5);
 
 		if (sync_mode & OMAP_DMA_SYNC_BLOCK)
 			val |= 1 << 18;
+		else
+			val &= ~(1 << 18);
 
 		if (src_or_dst_synch)
 			val |= 1 << 24;		/* source synch */
@@ -286,22 +293,39 @@ void omap_set_dma_src_data_pack(int lch, int enable)
 
 void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 {
+	unsigned int burst = 0;
 	OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 7);
 
 	switch (burst_mode) {
 	case OMAP_DMA_DATA_BURST_DIS:
 		break;
 	case OMAP_DMA_DATA_BURST_4:
-		OMAP_DMA_CSDP_REG(lch) |= (0x02 << 7);
+		if (cpu_is_omap24xx())
+			burst = 0x1;
+		else
+			burst = 0x2;
 		break;
 	case OMAP_DMA_DATA_BURST_8:
-		/* not supported by current hardware
+		if (cpu_is_omap24xx()) {
+			burst = 0x2;
+			break;
+		}
+		/* not supported by current hardware on OMAP1
 		 * w |= (0x03 << 7);
 		 * fall through
 		 */
+	case OMAP_DMA_DATA_BURST_16:
+		if (cpu_is_omap24xx()) {
+			burst = 0x3;
+			break;
+		}
+		/* OMAP1 don't support burst 16
+		 * fall through
+		 */
 	default:
 		BUG();
 	}
+	OMAP_DMA_CSDP_REG(lch) |= (burst << 7);
 }
 
 /* Note that dest_port is only for OMAP1 */
@@ -348,30 +372,49 @@ void omap_set_dma_dest_data_pack(int lch, int enable)
 
 void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
 {
+	unsigned int burst = 0;
 	OMAP_DMA_CSDP_REG(lch) &= ~(0x03 << 14);
 
 	switch (burst_mode) {
 	case OMAP_DMA_DATA_BURST_DIS:
 		break;
 	case OMAP_DMA_DATA_BURST_4:
-		OMAP_DMA_CSDP_REG(lch) |= (0x02 << 14);
+		if (cpu_is_omap24xx())
+			burst = 0x1;
+		else
+			burst = 0x2;
 		break;
 	case OMAP_DMA_DATA_BURST_8:
-		OMAP_DMA_CSDP_REG(lch) |= (0x03 << 14);
+		if (cpu_is_omap24xx())
+			burst = 0x2;
+		else
+			burst = 0x3;
 		break;
+	case OMAP_DMA_DATA_BURST_16:
+		if (cpu_is_omap24xx()) {
+			burst = 0x3;
+			break;
+		}
+		/* OMAP1 don't support burst 16
+		 * fall through
+		 */
 	default:
 		printk(KERN_ERR "Invalid DMA burst mode\n");
 		BUG();
 		return;
 	}
+	OMAP_DMA_CSDP_REG(lch) |= (burst << 14);
 }
 
 static inline void omap_enable_channel_irq(int lch)
 {
 	u32 status;
 
-	/* Read CSR to make sure it's cleared. */
-	status = OMAP_DMA_CSR_REG(lch);
+	/* Clear CSR */
+	if (cpu_class_is_omap1())
+		status = OMAP_DMA_CSR_REG(lch);
+	else if (cpu_is_omap24xx())
+		OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
 
 	/* Enable some nice interrupts. */
 	OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs;
@@ -470,11 +513,13 @@ int omap_request_dma(int dev_id, const char *dev_name,
 	chan->dev_name = dev_name;
 	chan->callback = callback;
 	chan->data = data;
-	chan->enabled_irqs = OMAP_DMA_TOUT_IRQ | OMAP_DMA_DROP_IRQ |
-				OMAP_DMA_BLOCK_IRQ;
+	chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
 
-	if (cpu_is_omap24xx())
-		chan->enabled_irqs |= OMAP2_DMA_TRANS_ERR_IRQ;
+	if (cpu_class_is_omap1())
+		chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
+	else if (cpu_is_omap24xx())
+		chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
+			OMAP2_DMA_TRANS_ERR_IRQ;
 
 	if (cpu_is_omap16xx()) {
 		/* If the sync device is set, configure it dynamically. */
@@ -494,7 +539,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 
 		omap_enable_channel_irq(free_ch);
 		/* Clear the CSR register and IRQ status register */
-		OMAP_DMA_CSR_REG(free_ch) = 0x0;
+		OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK;
 		omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0);
 	}
 
@@ -534,7 +579,7 @@ void omap_free_dma(int lch)
 		omap_writel(val, OMAP_DMA4_IRQENABLE_L0);
 
 		/* Clear the CSR register and IRQ status register */
-		OMAP_DMA_CSR_REG(lch) = 0x0;
+		OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
 
 		val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
 		val |= 1 << lch;
@@ -798,7 +843,7 @@ static int omap1_dma_handle_ch(int ch)
 		       "%d (CSR %04x)\n", ch, csr);
 		return 0;
 	}
-	if (unlikely(csr & OMAP_DMA_TOUT_IRQ))
+	if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
 		printk(KERN_WARNING "DMA timeout with device %d\n",
 		       dma_chan[ch].dev_id);
 	if (unlikely(csr & OMAP_DMA_DROP_IRQ))
@@ -846,20 +891,21 @@ static int omap2_dma_handle_ch(int ch)
 		return 0;
 	if (unlikely(dma_chan[ch].dev_id == -1))
 		return 0;
-	/* REVISIT: According to 24xx TRM, there's no TOUT_IE */
-	if (unlikely(status & OMAP_DMA_TOUT_IRQ))
-		printk(KERN_INFO "DMA timeout with device %d\n",
-		       dma_chan[ch].dev_id);
 	if (unlikely(status & OMAP_DMA_DROP_IRQ))
 		printk(KERN_INFO
 		       "DMA synchronization event drop occurred with device "
 		       "%d\n", dma_chan[ch].dev_id);
-
 	if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ))
 		printk(KERN_INFO "DMA transaction error with device %d\n",
 		       dma_chan[ch].dev_id);
+	if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
+		printk(KERN_INFO "DMA secure error with device %d\n",
+		       dma_chan[ch].dev_id);
+	if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
+		printk(KERN_INFO "DMA misaligned error with device %d\n",
+		       dma_chan[ch].dev_id);
 
-	OMAP_DMA_CSR_REG(ch) = 0x20;
+	OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK;
 
 	val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
 	/* ch in this function is from 0-31 while in register it is 1-32 */

arch/arm/plat-omap/dmtimer.c

@@ -4,7 +4,8 @@
  * OMAP Dual-Mode Timers
  *
  * Copyright (C) 2005 Nokia Corporation
- * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * OMAP2 support by Juha Yrjola
+ * API improvements and OMAP2 clock framework support by Timo Teras
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -26,15 +27,17 @@
  */
 
 #include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
 #include <asm/hardware.h>
 #include <asm/arch/dmtimer.h>
 #include <asm/io.h>
 #include <asm/arch/irqs.h>
-#include <linux/spinlock.h>
-#include <linux/list.h>
-
-#define OMAP_TIMER_COUNT		8
 
+/* register offsets */
 #define OMAP_TIMER_ID_REG		0x00
 #define OMAP_TIMER_OCP_CFG_REG		0x10
 #define OMAP_TIMER_SYS_STAT_REG		0x14
@@ -50,52 +53,196 @@
 #define OMAP_TIMER_CAPTURE_REG		0x3c
 #define OMAP_TIMER_IF_CTRL_REG		0x40
 
+/* timer control reg bits */
+#define OMAP_TIMER_CTRL_GPOCFG		(1 << 14)
+#define OMAP_TIMER_CTRL_CAPTMODE	(1 << 13)
+#define OMAP_TIMER_CTRL_PT		(1 << 12)
+#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH	(0x1 << 8)
+#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW	(0x2 << 8)
+#define OMAP_TIMER_CTRL_TCM_BOTHEDGES	(0x3 << 8)
+#define OMAP_TIMER_CTRL_SCPWM		(1 << 7)
+#define OMAP_TIMER_CTRL_CE		(1 << 6)	/* compare enable */
+#define OMAP_TIMER_CTRL_PRE		(1 << 5)	/* prescaler enable */
+#define OMAP_TIMER_CTRL_PTV_SHIFT	2		/* how much to shift the prescaler value */
+#define OMAP_TIMER_CTRL_AR		(1 << 1)	/* auto-reload enable */
+#define OMAP_TIMER_CTRL_ST		(1 << 0)	/* start timer */
+
+struct omap_dm_timer {
+	unsigned long phys_base;
+	int irq;
+#ifdef CONFIG_ARCH_OMAP2
+	struct clk *iclk, *fclk;
+#endif
+	void __iomem *io_base;
+	unsigned reserved:1;
+};
 
-static struct dmtimer_info_struct {
-	struct list_head	unused_timers;
-	struct list_head	reserved_timers;
-} dm_timer_info;
+#ifdef CONFIG_ARCH_OMAP1
 
 static struct omap_dm_timer dm_timers[] = {
-	{ .base=0xfffb1400, .irq=INT_1610_GPTIMER1 },
-	{ .base=0xfffb1c00, .irq=INT_1610_GPTIMER2 },
-	{ .base=0xfffb2400, .irq=INT_1610_GPTIMER3 },
-	{ .base=0xfffb2c00, .irq=INT_1610_GPTIMER4 },
-	{ .base=0xfffb3400, .irq=INT_1610_GPTIMER5 },
-	{ .base=0xfffb3c00, .irq=INT_1610_GPTIMER6 },
-	{ .base=0xfffb4400, .irq=INT_1610_GPTIMER7 },
-	{ .base=0xfffb4c00, .irq=INT_1610_GPTIMER8 },
-	{ .base=0x0 },
+	{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
+	{ .phys_base = 0xfffb1c00, .irq = INT_1610_GPTIMER2 },
+	{ .phys_base = 0xfffb2400, .irq = INT_1610_GPTIMER3 },
+	{ .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
+	{ .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
+	{ .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
+	{ .phys_base = 0xfffb4400, .irq = INT_1610_GPTIMER7 },
+	{ .phys_base = 0xfffb4c00, .irq = INT_1610_GPTIMER8 },
 };
 
+#elif defined(CONFIG_ARCH_OMAP2)
+
+static struct omap_dm_timer dm_timers[] = {
+	{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
+	{ .phys_base = 0x4802a000, .irq = INT_24XX_GPTIMER2 },
+	{ .phys_base = 0x48078000, .irq = INT_24XX_GPTIMER3 },
+	{ .phys_base = 0x4807a000, .irq = INT_24XX_GPTIMER4 },
+	{ .phys_base = 0x4807c000, .irq = INT_24XX_GPTIMER5 },
+	{ .phys_base = 0x4807e000, .irq = INT_24XX_GPTIMER6 },
+	{ .phys_base = 0x48080000, .irq = INT_24XX_GPTIMER7 },
+	{ .phys_base = 0x48082000, .irq = INT_24XX_GPTIMER8 },
+	{ .phys_base = 0x48084000, .irq = INT_24XX_GPTIMER9 },
+	{ .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
+	{ .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
+	{ .phys_base = 0x4808a000, .irq = INT_24XX_GPTIMER12 },
+};
+
+static const char *dm_source_names[] = {
+	"sys_ck",
+	"func_32k_ck",
+	"alt_ck"
+};
 
+static struct clk *dm_source_clocks[3];
+
+#else
+
+#error OMAP architecture not supported!
+
+#endif
+
+static const int dm_timer_count = ARRAY_SIZE(dm_timers);
 static spinlock_t dm_timer_lock;
 
+static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg)
+{
+	return readl(timer->io_base + reg);
+}
 
-inline void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value)
+static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value)
 {
-	omap_writel(value, timer->base + reg);
+	writel(value, timer->io_base + reg);
 	while (omap_dm_timer_read_reg(timer, OMAP_TIMER_WRITE_PEND_REG))
 		;
 }
 
-u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg)
+static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer)
 {
-	return omap_readl(timer->base + reg);
+	int c;
+
+	c = 0;
+	while (!(omap_dm_timer_read_reg(timer, OMAP_TIMER_SYS_STAT_REG) & 1)) {
+		c++;
+		if (c > 100000) {
+			printk(KERN_ERR "Timer failed to reset\n");
+			return;
+		}
+	}
 }
 
-int omap_dm_timers_active(void)
+static void omap_dm_timer_reset(struct omap_dm_timer *timer)
+{
+	u32 l;
+
+	if (timer != &dm_timers[0]) {
+		omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
+		omap_dm_timer_wait_for_reset(timer);
+	}
+	omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_SYS_CLK);
+
+	/* Set to smart-idle mode */
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG);
+	l |= 0x02 << 3;
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
+}
+
+static void omap_dm_timer_prepare(struct omap_dm_timer *timer)
+{
+#ifdef CONFIG_ARCH_OMAP2
+	clk_enable(timer->iclk);
+	clk_enable(timer->fclk);
+#endif
+	omap_dm_timer_reset(timer);
+}
+
+struct omap_dm_timer *omap_dm_timer_request(void)
+{
+	struct omap_dm_timer *timer = NULL;
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&dm_timer_lock, flags);
+	for (i = 0; i < dm_timer_count; i++) {
+		if (dm_timers[i].reserved)
+			continue;
+
+		timer = &dm_timers[i];
+		timer->reserved = 1;
+		break;
+	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+	if (timer != NULL)
+		omap_dm_timer_prepare(timer);
+
+	return timer;
+}
+
+struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 {
 	struct omap_dm_timer *timer;
+	unsigned long flags;
 
-	for (timer = &dm_timers[0]; timer->base; ++timer)
-		if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
-		    OMAP_TIMER_CTRL_ST)
-			return 1;
+	spin_lock_irqsave(&dm_timer_lock, flags);
+	if (id <= 0 || id > dm_timer_count || dm_timers[id-1].reserved) {
+		spin_unlock_irqrestore(&dm_timer_lock, flags);
+		printk("BUG: warning at %s:%d/%s(): unable to get timer %d\n",
+		       __FILE__, __LINE__, __FUNCTION__, id);
+		dump_stack();
+		return NULL;
+	}
 
-	return 0;
+	timer = &dm_timers[id-1];
+	timer->reserved = 1;
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+	omap_dm_timer_prepare(timer);
+
+	return timer;
 }
 
+void omap_dm_timer_free(struct omap_dm_timer *timer)
+{
+	omap_dm_timer_reset(timer);
+#ifdef CONFIG_ARCH_OMAP2
+	clk_disable(timer->iclk);
+	clk_disable(timer->fclk);
+#endif
+	WARN_ON(!timer->reserved);
+	timer->reserved = 0;
+}
+
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer)
+{
+	return timer->irq;
+}
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
+{
+	BUG();
+}
 
 /**
  * omap_dm_timer_modify_idlect_mask - Check if any running timers use ARMXOR
@@ -103,184 +250,229 @@ int omap_dm_timers_active(void)
  */
 __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 {
-	int n;
+	int i;
 
 	/* If ARMXOR cannot be idled this function call is unnecessary */
 	if (!(inputmask & (1 << 1)))
 		return inputmask;
 
 	/* If any active timer is using ARMXOR return modified mask */
-	for (n = 0; dm_timers[n].base; ++n)
-		if (omap_dm_timer_read_reg(&dm_timers[n], OMAP_TIMER_CTRL_REG)&
-		    OMAP_TIMER_CTRL_ST) {
-			if (((omap_readl(MOD_CONF_CTRL_1)>>(n*2)) & 0x03) == 0)
+	for (i = 0; i < dm_timer_count; i++) {
+		u32 l;
+
+		l = omap_dm_timer_read_reg(&dm_timers[i], OMAP_TIMER_CTRL_REG);
+		if (l & OMAP_TIMER_CTRL_ST) {
+			if (((omap_readl(MOD_CONF_CTRL_1) >> (i * 2)) & 0x03) == 0)
 				inputmask &= ~(1 << 1);
 			else
 				inputmask &= ~(1 << 2);
 		}
+	}
 
 	return inputmask;
 }
 
+#elif defined(CONFIG_ARCH_OMAP2)
 
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
 {
-	int n = (timer - dm_timers) << 1;
-	u32 l;
+        return timer->fclk;
+}
 
-	l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
-	l |= source << n;
-	omap_writel(l, MOD_CONF_CTRL_1);
+__u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
+{
+	BUG();
 }
 
+#endif
 
-static void omap_dm_timer_reset(struct omap_dm_timer *timer)
+void omap_dm_timer_trigger(struct omap_dm_timer *timer)
 {
-	/* Reset and set posted mode */
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, 0x02);
-
-	omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_ARMXOR);
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
 }
 
+void omap_dm_timer_start(struct omap_dm_timer *timer)
+{
+	u32 l;
 
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+	if (!(l & OMAP_TIMER_CTRL_ST)) {
+		l |= OMAP_TIMER_CTRL_ST;
+		omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+	}
+}
 
-struct omap_dm_timer * omap_dm_timer_request(void)
+void omap_dm_timer_stop(struct omap_dm_timer *timer)
 {
-	struct omap_dm_timer *timer = NULL;
-	unsigned long flags;
+	u32 l;
 
-	spin_lock_irqsave(&dm_timer_lock, flags);
-	if (!list_empty(&dm_timer_info.unused_timers)) {
-		timer = (struct omap_dm_timer *)
-				dm_timer_info.unused_timers.next;
-		list_move_tail((struct list_head *)timer,
-				&dm_timer_info.reserved_timers);
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+	if (l & OMAP_TIMER_CTRL_ST) {
+		l &= ~0x1;
+		omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
-
-	return timer;
 }
 
+#ifdef CONFIG_ARCH_OMAP1
 
-void omap_dm_timer_free(struct omap_dm_timer *timer)
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 {
-	unsigned long flags;
-
-	omap_dm_timer_reset(timer);
+	int n = (timer - dm_timers) << 1;
+	u32 l;
 
-	spin_lock_irqsave(&dm_timer_lock, flags);
-	list_move_tail((struct list_head *)timer, &dm_timer_info.unused_timers);
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
+	l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+	l |= source << n;
+	omap_writel(l, MOD_CONF_CTRL_1);
 }
 
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
-				unsigned int value)
-{
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
-}
+#else
 
-unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
 {
-	return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
-}
+	if (source < 0 || source >= 3)
+		return;
 
-void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
-{
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value);
+	clk_disable(timer->fclk);
+	clk_set_parent(timer->fclk, dm_source_clocks[source]);
+	clk_enable(timer->fclk);
+
+	/* When the functional clock disappears, too quick writes seem to
+	 * cause an abort. */
+	__delay(15000);
 }
 
-void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer)
+#endif
+
+void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload,
+			    unsigned int load)
 {
 	u32 l;
+
 	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	l |= OMAP_TIMER_CTRL_AR;
+	if (autoreload)
+		l |= OMAP_TIMER_CTRL_AR;
+	else
+		l &= ~OMAP_TIMER_CTRL_AR;
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 0);
 }
 
-void omap_dm_timer_trigger(struct omap_dm_timer *timer)
-{
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 1);
-}
-
-void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value)
+void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable,
+			     unsigned int match)
 {
 	u32 l;
 
 	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	l |= value & 0x3;
+	if (enable)
+		l |= OMAP_TIMER_CTRL_CE;
+	else
+		l &= ~OMAP_TIMER_CTRL_CE;
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
 }
 
-void omap_dm_timer_start(struct omap_dm_timer *timer)
+
+void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on,
+			   int toggle, int trigger)
 {
 	u32 l;
 
 	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	l |= OMAP_TIMER_CTRL_ST;
+	l &= ~(OMAP_TIMER_CTRL_GPOCFG | OMAP_TIMER_CTRL_SCPWM |
+	       OMAP_TIMER_CTRL_PT | (0x03 << 10));
+	if (def_on)
+		l |= OMAP_TIMER_CTRL_SCPWM;
+	if (toggle)
+		l |= OMAP_TIMER_CTRL_PT;
+	l |= trigger << 10;
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 }
 
-void omap_dm_timer_stop(struct omap_dm_timer *timer)
+void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler)
 {
 	u32 l;
 
 	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	l &= ~0x1;
+	l &= ~(OMAP_TIMER_CTRL_PRE | (0x07 << 2));
+	if (prescaler >= 0x00 && prescaler <= 0x07) {
+		l |= OMAP_TIMER_CTRL_PRE;
+		l |= prescaler << 2;
+	}
 	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
 }
 
-unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
+void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
+				  unsigned int value)
 {
-	return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG);
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
 }
 
-void omap_dm_timer_reset_counter(struct omap_dm_timer *timer)
+unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
 {
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, 0);
+	return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
 }
 
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load)
+void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
 {
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value);
 }
 
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match)
+unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
 {
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
+	return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG);
 }
 
-void omap_dm_timer_enable_compare(struct omap_dm_timer *timer)
+void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value)
 {
-	u32 l;
-
-	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
-	l |= OMAP_TIMER_CTRL_CE;
-	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+	return omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, value);
 }
 
+int omap_dm_timers_active(void)
+{
+	int i;
+
+	for (i = 0; i < dm_timer_count; i++) {
+		struct omap_dm_timer *timer;
+
+		timer = &dm_timers[i];
+		if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
+		    OMAP_TIMER_CTRL_ST)
+			return 1;
+	}
+	return 0;
+}
 
-static inline void __dm_timer_init(void)
+int omap_dm_timer_init(void)
 {
 	struct omap_dm_timer *timer;
+	int i;
+
+	if (!(cpu_is_omap16xx() || cpu_is_omap24xx()))
+		return -ENODEV;
 
 	spin_lock_init(&dm_timer_lock);
-	INIT_LIST_HEAD(&dm_timer_info.unused_timers);
-	INIT_LIST_HEAD(&dm_timer_info.reserved_timers);
-
-	timer = &dm_timers[0];
-	while (timer->base) {
-		list_add_tail((struct list_head *)timer, &dm_timer_info.unused_timers);
-		omap_dm_timer_reset(timer);
-		timer++;
+#ifdef CONFIG_ARCH_OMAP2
+	for (i = 0; i < ARRAY_SIZE(dm_source_names); i++) {
+		dm_source_clocks[i] = clk_get(NULL, dm_source_names[i]);
+		BUG_ON(dm_source_clocks[i] == NULL);
+	}
+#endif
+
+	for (i = 0; i < dm_timer_count; i++) {
+#ifdef CONFIG_ARCH_OMAP2
+		char clk_name[16];
+#endif
+
+		timer = &dm_timers[i];
+		timer->io_base = (void __iomem *) io_p2v(timer->phys_base);
+#ifdef CONFIG_ARCH_OMAP2
+		sprintf(clk_name, "gpt%d_ick", i + 1);
+		timer->iclk = clk_get(NULL, clk_name);
+		sprintf(clk_name, "gpt%d_fck", i + 1);
+		timer->fclk = clk_get(NULL, clk_name);
+#endif
 	}
-}
 
-static int __init omap_dm_timer_init(void)
-{
-	if (cpu_is_omap16xx())
-		__dm_timer_init();
 	return 0;
 }
-
-arch_initcall(omap_dm_timer_init);

arch/arm/plat-omap/gpio.c

@@ -536,6 +536,49 @@ static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
 	_clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio));
 }
 
+static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
+{
+	void __iomem *reg = bank->base;
+	int inv = 0;
+	u32 l;
+	u32 mask;
+
+	switch (bank->method) {
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_GPIO_MASKIT;
+		mask = 0xffff;
+		inv = 1;
+		break;
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_INT_MASK;
+		mask = 0xffff;
+		inv = 1;
+		break;
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_IRQENABLE1;
+		mask = 0xffff;
+		break;
+	case METHOD_GPIO_730:
+		reg += OMAP730_GPIO_INT_MASK;
+		mask = 0xffffffff;
+		inv = 1;
+		break;
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_IRQENABLE1;
+		mask = 0xffffffff;
+		break;
+	default:
+		BUG();
+		return 0;
+	}
+
+	l = __raw_readl(reg);
+	if (inv)
+		l = ~l;
+	l &= mask;
+	return l;
+}
+
 static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
 {
 	void __iomem *reg = bank->base;
@@ -735,6 +778,8 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 	u32 isr;
 	unsigned int gpio_irq;
 	struct gpio_bank *bank;
+	u32 retrigger = 0;
+	int unmasked = 0;
 
 	desc->chip->ack(irq);
 
@@ -759,18 +804,22 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 #endif
 	while(1) {
 		u32 isr_saved, level_mask = 0;
+		u32 enabled;
 
-		isr_saved = isr = __raw_readl(isr_reg);
+		enabled = _get_gpio_irqbank_mask(bank);
+		isr_saved = isr = __raw_readl(isr_reg) & enabled;
 
 		if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO))
 			isr &= 0x0000ffff;
 
-		if (cpu_is_omap24xx())
+		if (cpu_is_omap24xx()) {
 			level_mask =
 				__raw_readl(bank->base +
 					OMAP24XX_GPIO_LEVELDETECT0) |
 				__raw_readl(bank->base +
 					OMAP24XX_GPIO_LEVELDETECT1);
+			level_mask &= enabled;
+		}
 
 		/* clear edge sensitive interrupts before handler(s) are
 		called so that we don't miss any interrupt occurred while
@@ -781,19 +830,54 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 
 		/* if there is only edge sensitive GPIO pin interrupts
 		configured, we could unmask GPIO bank interrupt immediately */
-		if (!level_mask)
+		if (!level_mask && !unmasked) {
+			unmasked = 1;
 			desc->chip->unmask(irq);
+		}
 
+		isr |= retrigger;
+		retrigger = 0;
 		if (!isr)
 			break;
 
 		gpio_irq = bank->virtual_irq_start;
 		for (; isr != 0; isr >>= 1, gpio_irq++) {
 			struct irqdesc *d;
+			int irq_mask;
 			if (!(isr & 1))
 				continue;
 			d = irq_desc + gpio_irq;
+			/* Don't run the handler if it's already running
+			 * or was disabled lazely.
+			 */
+			if (unlikely((d->disable_depth || d->running))) {
+				irq_mask = 1 <<
+					(gpio_irq - bank->virtual_irq_start);
+				/* The unmasking will be done by
+				 * enable_irq in case it is disabled or
+				 * after returning from the handler if
+				 * it's already running.
+				 */
+				_enable_gpio_irqbank(bank, irq_mask, 0);
+				if (!d->disable_depth) {
+					/* Level triggered interrupts
+					 * won't ever be reentered
+					 */
+					BUG_ON(level_mask & irq_mask);
+					d->pending = 1;
+				}
+				continue;
+			}
+			d->running = 1;
 			desc_handle_irq(gpio_irq, d, regs);
+			d->running = 0;
+			if (unlikely(d->pending && !d->disable_depth)) {
+				irq_mask = 1 <<
+					(gpio_irq - bank->virtual_irq_start);
+				d->pending = 0;
+				_enable_gpio_irqbank(bank, irq_mask, 1);
+				retrigger |= irq_mask;
+			}
 		}
 
 		if (cpu_is_omap24xx()) {
@@ -803,13 +887,14 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 			_enable_gpio_irqbank(bank, isr_saved & level_mask, 1);
 		}
 
-		/* if bank has any level sensitive GPIO pin interrupt
-		configured, we must unmask the bank interrupt only after
-		handler(s) are executed in order to avoid spurious bank
-		interrupt */
-		if (level_mask)
-			desc->chip->unmask(irq);
 	}
+	/* if bank has any level sensitive GPIO pin interrupt
+	configured, we must unmask the bank interrupt only after
+	handler(s) are executed in order to avoid spurious bank
+	interrupt */
+	if (!unmasked)
+		desc->chip->unmask(irq);
+
 }
 
 static void gpio_ack_irq(unsigned int irq)

arch/arm/plat-omap/sram.c

@@ -157,14 +157,12 @@ static struct map_desc omap_sram_io_desc[] __initdata = {
 	{	/* .length gets filled in at runtime */
 		.virtual	= OMAP1_SRAM_VA,
 		.pfn		= __phys_to_pfn(OMAP1_SRAM_PA),
-		.type		= MT_DEVICE
+		.type		= MT_MEMORY
 	}
 };
 
 /*
- * In order to use last 2kB of SRAM on 1611b, we must round the size
- * up to multiple of PAGE_SIZE. We cannot use ioremap for SRAM, as
- * clock init needs SRAM early.
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
  */
 void __init omap_map_sram(void)
 {
@@ -184,8 +182,7 @@ void __init omap_map_sram(void)
 		omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
 	}
 
-	omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE;
-	omap_sram_io_desc[0].length *= PAGE_SIZE;
+	omap_sram_io_desc[0].length = 1024 * 1024;	/* Use section desc */
 	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
 	printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",

arch/arm/plat-omap/timer32k.c

@@ -7,6 +7,7 @@
  * Partial timer rewrite and additional dynamic tick timer support by
  * Tony Lindgen <tony@atomide.com> and
  * Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * OMAP Dual-mode timer framework support by Timo Teras
  *
  * MPU timer code based on the older MPU timer code for OMAP
  * Copyright (C) 2000 RidgeRun, Inc.
@@ -49,6 +50,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+#include <asm/arch/dmtimer.h>
 
 struct sys_timer omap_timer;
 
@@ -78,18 +80,6 @@ struct sys_timer omap_timer;
 #define OMAP1_32K_TIMER_TVR		0x00
 #define OMAP1_32K_TIMER_TCR		0x04
 
-/* 24xx specific defines */
-#define OMAP2_GP_TIMER_BASE		0x48028000
-#define CM_CLKSEL_WKUP			0x48008440
-#define GP_TIMER_TIDR			0x00
-#define GP_TIMER_TISR			0x18
-#define GP_TIMER_TIER			0x1c
-#define GP_TIMER_TCLR			0x24
-#define GP_TIMER_TCRR			0x28
-#define GP_TIMER_TLDR			0x2c
-#define GP_TIMER_TTGR			0x30
-#define GP_TIMER_TSICR			0x40
-
 #define OMAP_32K_TICKS_PER_HZ		(32768 / HZ)
 
 /*
@@ -101,54 +91,62 @@ struct sys_timer omap_timer;
 #define JIFFIES_TO_HW_TICKS(nr_jiffies, clock_rate)			\
 				(((nr_jiffies) * (clock_rate)) / HZ)
 
+#if defined(CONFIG_ARCH_OMAP1)
+
 static inline void omap_32k_timer_write(int val, int reg)
 {
-	if (cpu_class_is_omap1())
-		omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
-
-	if (cpu_is_omap24xx())
-		omap_writel(val, OMAP2_GP_TIMER_BASE + reg);
+	omap_writew(val, OMAP1_32K_TIMER_BASE + reg);
 }
 
 static inline unsigned long omap_32k_timer_read(int reg)
 {
-	if (cpu_class_is_omap1())
-		return omap_readl(OMAP1_32K_TIMER_BASE + reg) & 0xffffff;
+	return omap_readl(OMAP1_32K_TIMER_BASE + reg) & 0xffffff;
+}
 
-	if (cpu_is_omap24xx())
-		return omap_readl(OMAP2_GP_TIMER_BASE + reg);
+static inline void omap_32k_timer_start(unsigned long load_val)
+{
+	omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR);
+	omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR);
 }
 
-/*
- * The 32KHz synchronized timer is an additional timer on 16xx.
- * It is always running.
- */
-static inline unsigned long omap_32k_sync_timer_read(void)
+static inline void omap_32k_timer_stop(void)
 {
-	return omap_readl(TIMER_32K_SYNCHRONIZED);
+	omap_32k_timer_write(0x0, OMAP1_32K_TIMER_CR);
 }
 
+#define omap_32k_timer_ack_irq()
+
+#elif defined(CONFIG_ARCH_OMAP2)
+
+static struct omap_dm_timer *gptimer;
+
 static inline void omap_32k_timer_start(unsigned long load_val)
 {
-	if (cpu_class_is_omap1()) {
-		omap_32k_timer_write(load_val, OMAP1_32K_TIMER_TVR);
-		omap_32k_timer_write(0x0f, OMAP1_32K_TIMER_CR);
-	}
-
-	if (cpu_is_omap24xx()) {
-		omap_32k_timer_write(0xffffffff - load_val, GP_TIMER_TCRR);
-		omap_32k_timer_write((1 << 1), GP_TIMER_TIER);
-		omap_32k_timer_write((1 << 1) | 1, GP_TIMER_TCLR);
-	}
+	omap_dm_timer_set_load(gptimer, 1, 0xffffffff - load_val);
+	omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
+	omap_dm_timer_start(gptimer);
 }
 
 static inline void omap_32k_timer_stop(void)
 {
-	if (cpu_class_is_omap1())
-		omap_32k_timer_write(0x0, OMAP1_32K_TIMER_CR);
+	omap_dm_timer_stop(gptimer);
+}
 
-	if (cpu_is_omap24xx())
-		omap_32k_timer_write(0x0, GP_TIMER_TCLR);
+static inline void omap_32k_timer_ack_irq(void)
+{
+	u32 status = omap_dm_timer_read_status(gptimer);
+	omap_dm_timer_write_status(gptimer, status);
+}
+
+#endif
+
+/*
+ * The 32KHz synchronized timer is an additional timer on 16xx.
+ * It is always running.
+ */
+static inline unsigned long omap_32k_sync_timer_read(void)
+{
+	return omap_readl(TIMER_32K_SYNCHRONIZED);
 }
 
 /*
@@ -202,11 +200,7 @@ static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id,
 
 	write_seqlock_irqsave(&xtime_lock, flags);
 
-	if (cpu_is_omap24xx()) {
-		u32 status = omap_32k_timer_read(GP_TIMER_TISR);
-		omap_32k_timer_write(status, GP_TIMER_TISR);
-	}
-
+	omap_32k_timer_ack_irq();
 	now = omap_32k_sync_timer_read();
 
 	while ((signed long)(now - omap_32k_last_tick)
@@ -268,9 +262,6 @@ static struct irqaction omap_32k_timer_irq = {
 	.handler	= omap_32k_timer_interrupt,
 };
 
-static struct clk * gpt1_ick;
-static struct clk * gpt1_fck;
-
 static __init void omap_init_32k_timer(void)
 {
 #ifdef CONFIG_NO_IDLE_HZ
@@ -279,32 +270,22 @@ static __init void omap_init_32k_timer(void)
 
 	if (cpu_class_is_omap1())
 		setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
-	if (cpu_is_omap24xx())
-		setup_irq(37, &omap_32k_timer_irq);
 	omap_timer.offset  = omap_32k_timer_gettimeoffset;
 	omap_32k_last_tick = omap_32k_sync_timer_read();
 
+#ifdef CONFIG_ARCH_OMAP2
 	/* REVISIT: Check 24xx TIOCP_CFG settings after idle works */
 	if (cpu_is_omap24xx()) {
-		omap_32k_timer_write(0, GP_TIMER_TCLR);
-		omap_writel(0, CM_CLKSEL_WKUP);		/* 32KHz clock source */
-
-		gpt1_ick = clk_get(NULL, "gpt1_ick");
-		if (IS_ERR(gpt1_ick))
-			printk(KERN_ERR "Could not get gpt1_ick\n");
-		else
-			clk_enable(gpt1_ick);
-
-		gpt1_fck = clk_get(NULL, "gpt1_fck");
-		if (IS_ERR(gpt1_fck))
-			printk(KERN_ERR "Could not get gpt1_fck\n");
-		else
-			clk_enable(gpt1_fck);
-
-		mdelay(100);		/* Wait for clocks to stabilize */
-
-		omap_32k_timer_write(0x7, GP_TIMER_TISR);
+		gptimer = omap_dm_timer_request_specific(1);
+		BUG_ON(gptimer == NULL);
+
+		omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
+		setup_irq(omap_dm_timer_get_irq(gptimer), &omap_32k_timer_irq);
+		omap_dm_timer_set_int_enable(gptimer,
+			OMAP_TIMER_INT_CAPTURE | OMAP_TIMER_INT_OVERFLOW |
+			OMAP_TIMER_INT_MATCH);
 	}
+#endif
 
 	omap_32k_timer_start(OMAP_32K_TIMER_TICK_PERIOD);
 }
@@ -316,6 +297,9 @@ static __init void omap_init_32k_timer(void)
  */
 static void __init omap_timer_init(void)
 {
+#ifdef CONFIG_OMAP_DM_TIMER
+	omap_dm_timer_init();
+#endif
 	omap_init_32k_timer();
 }
 

drivers/mmc/omap.c

@@ -60,6 +60,7 @@ struct mmc_omap_host {
 	unsigned char		id; /* 16xx chips have 2 MMC blocks */
 	struct clk *		iclk;
 	struct clk *		fclk;
+	struct resource		*res;
 	void __iomem		*base;
 	int			irq;
 	unsigned char		bus_mode;
@@ -339,8 +340,6 @@ static void
 mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
 {
 	int n;
-	void __iomem *reg;
-	u16 *p;
 
 	if (host->buffer_bytes_left == 0) {
 		host->sg_idx++;
@@ -657,12 +656,12 @@ static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data)
 	struct mmc_data *mmcdat = host->data;
 
 	if (unlikely(host->dma_ch < 0)) {
-		dev_err(mmc_dev(host->mmc), "DMA callback while DMA not
-				enabled\n");
+		dev_err(mmc_dev(host->mmc),
+			"DMA callback while DMA not enabled\n");
 		return;
 	}
 	/* FIXME: We really should do something to _handle_ the errors */
-	if (ch_status & OMAP_DMA_TOUT_IRQ) {
+	if (ch_status & OMAP1_DMA_TOUT_IRQ) {
 		dev_err(mmc_dev(host->mmc),"DMA timeout\n");
 		return;
 	}
@@ -972,20 +971,20 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
 	struct omap_mmc_conf *minfo = pdev->dev.platform_data;
 	struct mmc_host *mmc;
 	struct mmc_omap_host *host = NULL;
+	struct resource *r;
 	int ret = 0;
+	int irq;
 	
-	if (platform_get_resource(pdev, IORESOURCE_MEM, 0) ||
-			platform_get_irq(pdev, IORESOURCE_IRQ, 0)) {
-		dev_err(&pdev->dev, "mmc_omap_probe: invalid resource type\n");
-		return -ENODEV;
-	}
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	irq = platform_get_irq(pdev, 0);
+	if (!r || irq < 0)
+		return -ENXIO;
 
-	if (!request_mem_region(pdev->resource[0].start,
+	r = request_mem_region(pdev->resource[0].start,
 				pdev->resource[0].end - pdev->resource[0].start + 1,
-				pdev->name)) {
-		dev_dbg(&pdev->dev, "request_mem_region failed\n");
+			       pdev->name);
+	if (!r)
 		return -EBUSY;
-	}
 
 	mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
 	if (!mmc) {
@@ -1002,6 +1001,8 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
 	host->dma_timer.data = (unsigned long) host;
 
 	host->id = pdev->id;
+	host->res = r;
+	host->irq = irq;
 
 	if (cpu_is_omap24xx()) {
 		host->iclk = clk_get(&pdev->dev, "mmc_ick");
@@ -1031,13 +1032,9 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
 	host->dma_ch = -1;
 
 	host->irq = pdev->resource[1].start;
-	host->base = ioremap(pdev->res.start, SZ_4K);
-	if (!host->base) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	host->base = (void __iomem*)IO_ADDRESS(r->start);
 
-	 if (minfo->wire4)
+	if (minfo->wire4)
 		 mmc->caps |= MMC_CAP_4_BIT_DATA;
 
 	mmc->ops = &mmc_omap_ops;
@@ -1056,8 +1053,8 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
 
 	if (host->power_pin >= 0) {
 		if ((ret = omap_request_gpio(host->power_pin)) != 0) {
-			dev_err(mmc_dev(host->mmc), "Unable to get GPIO
-					pin for MMC power\n");
+			dev_err(mmc_dev(host->mmc),
+				"Unable to get GPIO pin for MMC power\n");
 			goto out;
 		}
 		omap_set_gpio_direction(host->power_pin, 0);
@@ -1099,7 +1096,7 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
 				device_remove_file(&pdev->dev, &dev_attr_cover_switch);
 		}
 		if (ret) {
-			dev_wan(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
+			dev_warn(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
 			free_irq(OMAP_GPIO_IRQ(host->switch_pin), host);
 			omap_free_gpio(host->switch_pin);
 			host->switch_pin = -1;

drivers/usb/gadget/omap_udc.c

@@ -772,7 +772,7 @@ static void dma_error(int lch, u16 ch_status, void *data)
 	struct omap_ep	*ep = data;
 
 	/* if ch_status & OMAP_DMA_DROP_IRQ ... */
-	/* if ch_status & OMAP_DMA_TOUT_IRQ ... */
+	/* if ch_status & OMAP1_DMA_TOUT_IRQ ... */
 	ERR("%s dma error, lch %d status %02x\n", ep->ep.name, lch, ch_status);
 
 	/* complete current transfer ... */

include/asm-arm/arch-omap/board-fsample.h

@@ -0,0 +1,51 @@
+/*
+ * linux/include/asm-arm/arch-omap/board-fsample.h
+ *
+ * Board-specific goodies for TI F-Sample.
+ *
+ * Copyright (C) 2006 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
+#define __ASM_ARCH_OMAP_FSAMPLE_H
+
+/* fsample is pretty close to p2-sample */
+#include <asm/arch/board-perseus2.h>
+
+#define fsample_cpld_read(reg) __raw_readb(reg)
+#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
+
+#define FSAMPLE_CPLD_BASE    0xE8100000
+#define FSAMPLE_CPLD_SIZE    SZ_4K
+#define FSAMPLE_CPLD_START   0x05080000
+
+#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
+#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
+#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
+#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
+
+#define FSAMPLE_CPLD_BIT_BT_RESET         0
+#define FSAMPLE_CPLD_BIT_LCD_RESET        1
+#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
+#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
+#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
+#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
+#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
+#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
+#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
+#define FSAMPLE_CPLD_BIT_OTG_RESET        9
+
+#define fsample_cpld_set(bit) \
+    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
+
+#define fsample_cpld_clear(bit) \
+    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
+
+#endif

include/asm-arm/arch-omap/board.h

@@ -22,6 +22,7 @@
 #define OMAP_TAG_UART		0x4f07
 #define OMAP_TAG_FBMEM		0x4f08
 #define OMAP_TAG_STI_CONSOLE	0x4f09
+#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
 
 #define OMAP_TAG_BOOT_REASON    0x4f80
 #define OMAP_TAG_FLASH_PART	0x4f81
@@ -61,6 +62,12 @@ struct omap_sti_console_config {
 	u8 channel;
 };
 
+struct omap_camera_sensor_config {
+	u16 reset_gpio;
+	int (*power_on)(void * data);
+	int (*power_off)(void * data);
+};
+
 struct omap_usb_config {
 	/* Configure drivers according to the connectors on your board:
 	 *  - "A" connector (rectagular)

include/asm-arm/arch-omap/dma.h

@@ -185,8 +185,8 @@
 /* DMA channels for 24xx */
 #define OMAP24XX_DMA_NO_DEVICE		0
 #define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */
-#define OMAP24XX_DMA_EXT_NDMA_REQ0	2	/* S_DMA_1 */
-#define OMAP24XX_DMA_EXT_NDMA_REQ1	3	/* S_DMA_2 */
+#define OMAP24XX_DMA_EXT_DMAREQ0	2	/* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1	3	/* S_DMA_2 */
 #define OMAP24XX_DMA_GPMC		4	/* S_DMA_3 */
 #define OMAP24XX_DMA_GFX		5	/* S_DMA_4 */
 #define OMAP24XX_DMA_DSS		6	/* S_DMA_5 */
@@ -197,7 +197,9 @@
 #define OMAP24XX_DMA_DES_TX		11	/* S_DMA_10 */
 #define OMAP24XX_DMA_DES_RX		12	/* S_DMA_11 */
 #define OMAP24XX_DMA_SHA1MD5_RX		13	/* S_DMA_12 */
-
+#define OMAP24XX_DMA_EXT_DMAREQ2	14	/* S_DMA_13 */
+#define OMAP24XX_DMA_EXT_DMAREQ3	15	/* S_DMA_14 */
+#define OMAP24XX_DMA_EXT_DMAREQ4	16	/* S_DMA_15 */
 #define OMAP24XX_DMA_EAC_AC_RD		17	/* S_DMA_16 */
 #define OMAP24XX_DMA_EAC_AC_WR		18	/* S_DMA_17 */
 #define OMAP24XX_DMA_EAC_MD_UL_RD	19	/* S_DMA_18 */
@@ -244,6 +246,7 @@
 #define OMAP24XX_DMA_MMC1_TX		61	/* SDMA_60 */
 #define OMAP24XX_DMA_MMC1_RX		62	/* SDMA_61 */
 #define OMAP24XX_DMA_MS			63	/* SDMA_62 */
+#define OMAP24XX_DMA_EXT_DMAREQ5	64	/* S_DMA_63 */
 
 /*----------------------------------------------------------------------------*/
 
@@ -274,7 +277,7 @@
 #define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
 #define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
 
-#define OMAP_DMA_TOUT_IRQ		(1 << 0)	/* Only on omap1 */
+#define OMAP1_DMA_TOUT_IRQ		(1 << 0)
 #define OMAP_DMA_DROP_IRQ		(1 << 1)
 #define OMAP_DMA_HALF_IRQ		(1 << 2)
 #define OMAP_DMA_FRAME_IRQ		(1 << 3)
@@ -315,11 +318,11 @@ enum {
 	OMAP_LCD_DMA_B2_BOTTOM
 };
 
-/* REVISIT: Check if BURST_4 is really 1 (or 2) */
 enum omap_dma_burst_mode {
 	OMAP_DMA_DATA_BURST_DIS = 0,
 	OMAP_DMA_DATA_BURST_4,
-	OMAP_DMA_DATA_BURST_8
+	OMAP_DMA_DATA_BURST_8,
+	OMAP_DMA_DATA_BURST_16,
 };
 
 enum omap_dma_color_mode {

include/asm-arm/arch-omap/dmtimer.h

@@ -5,6 +5,7 @@
  *
  * Copyright (C) 2005 Nokia Corporation
  * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * PWM and clock framwork support by Timo Teras.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -25,69 +26,56 @@
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#ifndef __ASM_ARCH_TIMER_H
-#define __ASM_ARCH_TIMER_H
-
-#include <linux/list.h>
-
-#define OMAP_TIMER_SRC_ARMXOR		0x00
-#define OMAP_TIMER_SRC_32_KHZ		0x01
-#define OMAP_TIMER_SRC_EXT_CLK		0x02
-
-/* timer control reg bits */
-#define OMAP_TIMER_CTRL_CAPTMODE	(1 << 13)
-#define OMAP_TIMER_CTRL_PT		(1 << 12)
-#define OMAP_TIMER_CTRL_TRG_OVERFLOW	(0x1 << 10)
-#define OMAP_TIMER_CTRL_TRG_OFANDMATCH	(0x2 << 10)
-#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH	(0x1 << 8)
-#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW	(0x2 << 8)
-#define OMAP_TIMER_CTRL_TCM_BOTHEDGES	(0x3 << 8)
-#define OMAP_TIMER_CTRL_SCPWM		(1 << 7)
-#define OMAP_TIMER_CTRL_CE		(1 << 6)	/* compare enable */
-#define OMAP_TIMER_CTRL_PRE		(1 << 5)	/* prescaler enable */
-#define OMAP_TIMER_CTRL_PTV_SHIFT	2		/* how much to shift the prescaler value */
-#define OMAP_TIMER_CTRL_AR		(1 << 1)	/* auto-reload enable */
-#define OMAP_TIMER_CTRL_ST		(1 << 0)	/* start timer */
+#ifndef __ASM_ARCH_DMTIMER_H
+#define __ASM_ARCH_DMTIMER_H
 
-/* timer interrupt enable bits */
-#define OMAP_TIMER_INT_CAPTURE		(1 << 2)
-#define OMAP_TIMER_INT_OVERFLOW		(1 << 1)
-#define OMAP_TIMER_INT_MATCH		(1 << 0)
+/* clock sources */
+#define OMAP_TIMER_SRC_SYS_CLK			0x00
+#define OMAP_TIMER_SRC_32_KHZ			0x01
+#define OMAP_TIMER_SRC_EXT_CLK			0x02
 
+/* timer interrupt enable bits */
+#define OMAP_TIMER_INT_CAPTURE			(1 << 2)
+#define OMAP_TIMER_INT_OVERFLOW			(1 << 1)
+#define OMAP_TIMER_INT_MATCH			(1 << 0)
 
-struct omap_dm_timer {
-	struct list_head timer_list;
+/* trigger types */
+#define OMAP_TIMER_TRIGGER_NONE			0x00
+#define OMAP_TIMER_TRIGGER_OVERFLOW		0x01
+#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
 
-	u32 base;
-	unsigned int irq;
-};
+struct omap_dm_timer;
+struct clk;
 
-u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg);
-void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value);
+int omap_dm_timer_init(void);
 
-struct omap_dm_timer * omap_dm_timer_request(void);
+struct omap_dm_timer *omap_dm_timer_request(void);
+struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
 void omap_dm_timer_free(struct omap_dm_timer *timer);
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
 
-void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
-void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value);
-void omap_dm_timer_enable_compare(struct omap_dm_timer *timer);
-void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer);
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
+
+u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
 
 void omap_dm_timer_trigger(struct omap_dm_timer *timer);
 void omap_dm_timer_start(struct omap_dm_timer *timer);
 void omap_dm_timer_stop(struct omap_dm_timer *timer);
 
-void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load);
-void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match);
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
+void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
+
+void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
 
 unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
 void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
-
 unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
-void omap_dm_timer_reset_counter(struct omap_dm_timer *timer);
+void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
 
 int omap_dm_timers_active(void);
-u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
 
-#endif /* __ASM_ARCH_TIMER_H */
+
+#endif /* __ASM_ARCH_DMTIMER_H */

include/asm-arm/arch-omap/gpmc.h

@@ -0,0 +1,91 @@
+/*
+ * General-Purpose Memory Controller for OMAP2
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_GPMC_H
+#define __OMAP2_GPMC_H
+
+#define GPMC_CS_CONFIG1		0x00
+#define GPMC_CS_CONFIG2		0x04
+#define GPMC_CS_CONFIG3		0x08
+#define GPMC_CS_CONFIG4		0x0c
+#define GPMC_CS_CONFIG5		0x10
+#define GPMC_CS_CONFIG6		0x14
+#define GPMC_CS_CONFIG7		0x18
+#define GPMC_CS_NAND_COMMAND	0x1c
+#define GPMC_CS_NAND_ADDRESS	0x20
+#define GPMC_CS_NAND_DATA	0x24
+
+#define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
+#define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 20)
+#define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
+#define GPMC_CONFIG1_READTYPE_SYNC      (1 << 29)
+#define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
+#define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
+#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
+#define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
+#define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
+#define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
+#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
+#define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
+#define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
+#define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
+#define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
+#define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
+#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(1)
+#define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
+#define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
+#define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
+#define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
+#define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
+#define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
+
+/*
+ * Note that all values in this struct are in nanoseconds, while
+ * the register values are in gpmc_fck cycles.
+ */
+struct gpmc_timings {
+	/* Minimum clock period for synchronous mode */
+	u16 sync_clk;
+
+	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
+	u16 cs_on;		/* Assertion time */
+	u16 cs_rd_off;		/* Read deassertion time */
+	u16 cs_wr_off;		/* Write deassertion time */
+
+	/* ADV signal timings corresponding to GPMC_CONFIG3 */
+	u16 adv_on;		/* Assertion time */
+	u16 adv_rd_off;		/* Read deassertion time */
+	u16 adv_wr_off;		/* Write deassertion time */
+
+	/* WE signals timings corresponding to GPMC_CONFIG4 */
+	u16 we_on;		/* WE assertion time */
+	u16 we_off;		/* WE deassertion time */
+
+	/* OE signals timings corresponding to GPMC_CONFIG4 */
+	u16 oe_on;		/* OE assertion time */
+	u16 oe_off;		/* OE deassertion time */
+
+	/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
+	u16 page_burst_access;	/* Multiple access word delay */
+	u16 access;		/* Start-cycle to first data valid delay */
+	u16 rd_cycle;		/* Total read cycle time */
+	u16 wr_cycle;		/* Total write cycle time */
+};
+
+extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+
+extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
+extern u32 gpmc_cs_read_reg(int cs, int idx);
+extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern unsigned long gpmc_cs_get_base_addr(int cs);
+
+
+#endif

include/asm-arm/arch-omap/hardware.h

@@ -297,6 +297,10 @@
 #include "board-perseus2.h"
 #endif
 
+#ifdef CONFIG_MACH_OMAP_FSAMPLE
+#include "board-fsample.h"
+#endif
+
 #ifdef CONFIG_MACH_OMAP_H3
 #include "board-h3.h"
 #endif

include/asm-arm/arch-omap/irqs.h

@@ -242,10 +242,24 @@
 #define INT_24XX_GPIO_BANK2	30
 #define INT_24XX_GPIO_BANK3	31
 #define INT_24XX_GPIO_BANK4	32
+#define INT_24XX_GPTIMER1	37
+#define INT_24XX_GPTIMER2	38
+#define INT_24XX_GPTIMER3	39
+#define INT_24XX_GPTIMER4	40
+#define INT_24XX_GPTIMER5	41
+#define INT_24XX_GPTIMER6	42
+#define INT_24XX_GPTIMER7	43
+#define INT_24XX_GPTIMER8	44
+#define INT_24XX_GPTIMER9	45
+#define INT_24XX_GPTIMER10	46
+#define INT_24XX_GPTIMER11	47
+#define INT_24XX_GPTIMER12	48
 #define INT_24XX_MCBSP1_IRQ_TX	59
 #define INT_24XX_MCBSP1_IRQ_RX	60
 #define INT_24XX_MCBSP2_IRQ_TX	62
 #define INT_24XX_MCBSP2_IRQ_RX	63
+#define INT_24XX_UART1_IRQ	72
+#define INT_24XX_UART2_IRQ	73
 #define INT_24XX_UART3_IRQ	74
 
 /* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and

include/asm-arm/arch-omap/mux.h

@@ -410,6 +410,12 @@ enum omap24xx_index {
 	/* 24xx clock */
 	W14_24XX_SYS_CLKOUT,
 
+	/* 24xx GPMC wait pin monitoring */
+	L3_GPMC_WAIT0,
+	N7_GPMC_WAIT1,
+	M1_GPMC_WAIT2,
+	P1_GPMC_WAIT3,
+
 	/* 242X McBSP */
 	Y15_24XX_MCBSP2_CLKX,
 	R14_24XX_MCBSP2_FSX,
@@ -429,6 +435,26 @@ enum omap24xx_index {
 	M15_24XX_GPIO92,
 	V14_24XX_GPIO117,
 
+	/* 242x DBG GPIO */
+	V4_242X_GPIO49,
+	W2_242X_GPIO50,
+	U4_242X_GPIO51,
+	V3_242X_GPIO52,
+	V2_242X_GPIO53,
+	V6_242X_GPIO53,
+	T4_242X_GPIO54,
+	Y4_242X_GPIO54,
+	T3_242X_GPIO55,
+	U2_242X_GPIO56,
+
+	/* 24xx external DMA requests */
+	AA10_242X_DMAREQ0,
+	AA6_242X_DMAREQ1,
+	E4_242X_DMAREQ2,
+	G4_242X_DMAREQ3,
+	D3_242X_DMAREQ4,
+	E3_242X_DMAREQ5,
+
 	P20_24XX_TSC_IRQ,
 
 	/* UART3 */

include/asm-arm/arch-omap/pm.h

@@ -299,10 +299,43 @@ enum omap24xx_save_state {
 	OMAP24XX_SLEEP_SAVE_INTC_MIR0,
 	OMAP24XX_SLEEP_SAVE_INTC_MIR1,
 	OMAP24XX_SLEEP_SAVE_INTC_MIR2,
+
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
+
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
+
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
+
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
+
 	OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
 	OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
 	OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
 	OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
 	OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
 	OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
 	OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,

include/asm-arm/arch-pxa/pxa-regs.h

@@ -1329,6 +1329,7 @@
 #define GPIO84_NSRXD		84	/* NSSP receive */
 #define GPIO85_nPCE_1		85	/* Card Enable for Card Space (PXA27x) */
 #define GPIO92_MMCDAT0		92	/* MMC DAT0 (PXA27x) */
+#define GPIO102_nPCE_1		102	/* PCMCIA (PXA27x) */
 #define GPIO109_MMCDAT1		109	/* MMC DAT1 (PXA27x) */
 #define GPIO110_MMCDAT2		110	/* MMC DAT2 (PXA27x) */
 #define GPIO110_MMCCS0		110	/* MMC Chip Select 0 (PXA27x) */
@@ -1471,6 +1472,7 @@
 #define GPIO84_NSSP_RX      	(84 | GPIO_ALT_FN_2_IN)
 #define GPIO85_nPCE_1_MD	(85 | GPIO_ALT_FN_1_OUT)
 #define GPIO92_MMCDAT0_MD	(92 | GPIO_ALT_FN_1_OUT)
+#define GPIO102_nPCE_1_MD	(102 | GPIO_ALT_FN_1_OUT)
 #define GPIO104_pSKTSEL_MD	(104 | GPIO_ALT_FN_1_OUT)
 #define GPIO109_MMCDAT1_MD	(109 | GPIO_ALT_FN_1_OUT)
 #define GPIO110_MMCDAT2_MD	(110 | GPIO_ALT_FN_1_OUT)

include/asm-arm/arch-pxa/trizeps4.h

@@ -0,0 +1,106 @@
+/************************************************************************
+ * Include file for TRIZEPS4 SoM and ConXS eval-board
+ * Copyright (c) Jürgen Schindele
+ * 2006
+ ************************************************************************/
+
+/*
+ * Includes/Defines
+ */
+#ifndef _TRIPEPS4_H_
+#define _TRIPEPS4_H_
+
+/* physical memory regions */
+#define TRIZEPS4_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
+#define TRIZEPS4_DISK_PHYS	(PXA_CS1_PHYS)  /* Disk On Chip region */
+#define TRIZEPS4_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
+#define TRIZEPS4_PIC_PHYS	(PXA_CS3_PHYS)	/* Logic chip on ConXS-Board */
+#define TRIZEPS4_SDRAM_BASE	0xa0000000      /* SDRAM region */
+
+#define TRIZEPS4_CFSR_PHYS	(PXA_CS3_PHYS)			/* Logic chip on ConXS-Board CSFR register */
+#define TRIZEPS4_BOCR_PHYS	(PXA_CS3_PHYS+0x02000000)	/* Logic chip on ConXS-Board BOCR register */
+#define TRIZEPS4_IRCR_PHYS	(PXA_CS3_PHYS+0x02400000)	/* Logic chip on ConXS-Board IRCR register*/
+#define TRIZEPS4_UPSR_PHYS	(PXA_CS3_PHYS+0x02800000)	/* Logic chip on ConXS-Board UPSR register*/
+#define TRIZEPS4_DICR_PHYS	(PXA_CS3_PHYS+0x03800000)	/* Logic chip on ConXS-Board DICR register*/
+
+/* virtual memory regions */
+#define TRIZEPS4_DISK_VIRT	0xF0000000	/* Disk On Chip region */
+
+#define TRIZEPS4_PIC_VIRT	0xF0100000	/* not used */
+#define TRIZEPS4_CFSR_VIRT	0xF0100000
+#define TRIZEPS4_BOCR_VIRT	0xF0200000
+#define TRIZEPS4_DICR_VIRT	0xF0300000
+#define TRIZEPS4_IRCR_VIRT	0xF0400000
+#define TRIZEPS4_UPSR_VIRT	0xF0500000
+
+/* size of flash */
+#define TRIZEPS4_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
+
+/* Ethernet Controller Davicom DM9000 */
+#define GPIO_DM9000		101
+#define TRIZEPS4_ETH_IRQ	IRQ_GPIO(GPIO_DM9000)
+
+/* UCB1400 audio / TS-controller */
+#define GPIO_UCB1400		1
+#define TRIZEPS4_UCB1400_IRQ	IRQ_GPIO(GPIO_UCB1400)
+
+/* PCMCIA socket Compact Flash */
+#define GPIO_PCD		11		/* PCMCIA Card Detect */
+#define TRIZEPS4_CD_IRQ		IRQ_GPIO(GPIO_PCD)
+#define GPIO_PRDY		13		/* READY / nINT */
+#define TRIZEPS4_READY_NINT	IRQ_GPIO(GPIO_PRDY)
+
+/* MMC socket */
+#define GPIO_MMC_DET		12
+#define TRIZEPS4_MMC_IRQ	IRQ_GPIO(GPIO_MMC_DET)
+
+/* LEDS using tx2 / rx2 */
+#define GPIO_SYS_BUSY_LED	46
+#define GPIO_HEARTBEAT_LED	47
+
+/* Off-module PIC on ConXS board */
+#define GPIO_PIC		0
+#define TRIZEPS4_PIC_IRQ	IRQ_GPIO(GPIO_PIC)
+
+#define CFSR_P2V(x)		((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
+#define CFSR_V2P(x)		((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
+
+#define BCR_P2V(x)		((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
+#define BCR_V2P(x)		((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
+
+#define DCR_P2V(x)		((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
+#define DCR_V2P(x)		((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+
+#ifndef __ASSEMBLY__
+#define ConXS_CFSR		(*((volatile unsigned short *)CFSR_P2V(0x0C000000)))
+#define ConXS_BCR		(*((volatile unsigned short *)BCR_P2V(0x0E000000)))
+#define ConXS_DCR		(*((volatile unsigned short *)DCR_P2V(0x0F800000)))
+#else
+#define ConXS_CFSR		CFSR_P2V(0x0C000000)
+#define ConXS_BCR		BCR_P2V(0x0E000000)
+#define ConXS_DCR		DCR_P2V(0x0F800000)
+#endif
+
+#define ConXS_CFSR_BVD_MASK	0x0003
+#define ConXS_CFSR_BVD1		(1 << 0)
+#define ConXS_CFSR_BVD2		(1 << 1)
+#define ConXS_CFSR_VS_MASK	0x000C
+#define ConXS_CFSR_VS1		(1 << 2)
+#define ConXS_CFSR_VS2		(1 << 3)
+#define ConXS_CFSR_VS_5V	(0x3 << 2)
+#define ConXS_CFSR_VS_3V3	0x0
+
+#define ConXS_BCR_S0_POW_EN0	(1 << 0)
+#define ConXS_BCR_S0_POW_EN1	(1 << 1)
+#define ConXS_BCR_L_DISP	(1 << 4)
+#define ConXS_BCR_CF_BUF_EN	(1 << 5)
+#define ConXS_BCR_CF_RESET	(1 << 7)
+#define ConXS_BCR_S0_VCC_3V3	0x1
+#define ConXS_BCR_S0_VCC_5V0	0x2
+#define ConXS_BCR_S0_VPP_12V	0x4
+#define ConXS_BCR_S0_VPP_3V3	0x8
+
+#define ConXS_IRCR_MODE		(1 << 0)
+#define ConXS_IRCR_SD		(1 << 1)
+
+#endif /* _TRIPEPS4_H_ */