Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix build on some non-freescale platforms
  powerpc/powernv: Fix PCI resource handling
  powerpc/crash: Fix build error without SMP
  powerpc/cpuidle: Make it a bool, not a tristate
  powerpc/85xx: Add dr_mode property in USB nodes
  powerpc/85xx: Enable USB2 controller node for P1020RDB
  powerpc/85xx: Fix cmd12 bug and add the chip compatible for eSDHC
  arch/powerpc/sysdev/fsl_pci.c: add missing iounmap
  powerpc: fix compile error with 85xx/p1022_ds.c

arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi

@@ -236,6 +236,10 @@
 	};
 
 /include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+	};
+
 /include/ "pq3-sec3.0-0.dtsi"
 /include/ "pq3-mpic.dtsi"
 /include/ "pq3-mpic-timer-B.dtsi"

arch/powerpc/boot/dts/fsl/p1010si-post.dtsi

@@ -158,7 +158,8 @@
 /include/ "pq3-usb2-dr-0.dtsi"
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {
-		fsl,sdhci-auto-cmd12;
+		compatible = "fsl,p1010-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
 	};
 
 /include/ "pq3-sec4.4-0.dtsi"

arch/powerpc/boot/dts/fsl/p1020si-post.dtsi

@@ -145,6 +145,10 @@
 /include/ "pq3-usb2-dr-1.dtsi"
 
 /include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,p1020-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
 /include/ "pq3-sec3.3-0.dtsi"
 
 /include/ "pq3-mpic.dtsi"

arch/powerpc/boot/dts/fsl/p1022si-post.dtsi

@@ -203,7 +203,8 @@
 
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {
-		fsl,sdhci-auto-cmd12;
+		compatible = "fsl,p1022-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
 	};
 
 /include/ "pq3-sec3.3-0.dtsi"

arch/powerpc/boot/dts/fsl/p2020si-post.dtsi

@@ -182,6 +182,10 @@
 /include/ "pq3-etsec1-1.dtsi"
 /include/ "pq3-etsec1-2.dtsi"
 /include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+	};
+
 /include/ "pq3-sec3.1-0.dtsi"
 /include/ "pq3-mpic.dtsi"
 /include/ "pq3-mpic-timer-B.dtsi"

arch/powerpc/boot/dts/p1020rdb.dtsi

@@ -1,7 +1,7 @@
 /*
  * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -190,17 +190,16 @@
 
 	usb@22000 {
 		phy_type = "ulpi";
+		dr_mode = "host";
 	};
 
-	/* USB2 is shared with localbus, so it must be disabled
-	   by default. We can't put 'status = "disabled";' here
-	   since U-Boot doesn't clear the status property when
-	   it enables USB2. OTOH, U-Boot does create a new node
-	   when there isn't any. So, just comment it out.
+	/* USB2 is shared with localbus. It is used
+	   only in case of SPI and SD boot after
+	   appropriate device-tree fixup done by uboot */
 	usb@23000 {
 		phy_type = "ulpi";
+		dr_mode = "host";
 	};
-	*/
 
 	mdio@24000 {
 		phy0: ethernet-phy@0 {

arch/powerpc/boot/dts/p1021mds.dts

@@ -1,7 +1,7 @@
 /*
  * P1021 MDS Device Tree Source
  *
- * Copyright 2010 Freescale Semiconductor Inc.
+ * Copyright 2010,2012 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -151,6 +151,7 @@
 
 		usb@22000 {
 			phy_type = "ulpi";
+			dr_mode = "host";
 		};
 
 		mdio@24000 {

arch/powerpc/boot/dts/p2020ds.dtsi

@@ -1,7 +1,7 @@
 /*
  * P2020DS Device Tree Source stub (no addresses or top-level ranges)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -134,6 +134,7 @@
 &board_soc {
 	usb@22000 {
 		phy_type = "ulpi";
+		dr_mode = "host";
 	};
 
 	mdio@24520 {

arch/powerpc/boot/dts/p2020rdb.dts

@@ -1,7 +1,7 @@
 /*
  * P2020 RDB Device Tree Source
  *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
+ * Copyright 2009-2012 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -197,6 +197,7 @@
 
 		usb@22000 {
 			phy_type = "ulpi";
+			dr_mode = "host";
 		};
 
 		mdio@24520 {

arch/powerpc/kernel/crash.c

@@ -46,7 +46,6 @@
 
 /* This keeps a track of which one is the crashing cpu. */
 int crashing_cpu = -1;
-static atomic_t cpus_in_crash;
 static int time_to_dump;
 
 #define CRASH_HANDLER_MAX 3
@@ -66,6 +65,7 @@ static int handle_fault(struct pt_regs *regs)
 
 #ifdef CONFIG_SMP
 
+static atomic_t cpus_in_crash;
 void crash_ipi_callback(struct pt_regs *regs)
 {
 	static cpumask_t cpus_state_saved = CPU_MASK_NONE;

arch/powerpc/kernel/legacy_serial.c

@@ -442,8 +442,10 @@ static void __init fixup_port_irq(int index,
 
 	port->irq = virq;
 
+#ifdef CONFIG_SERIAL_8250_FSL
 	if (of_device_is_compatible(np, "fsl,ns16550"))
 		port->handle_irq = fsl8250_handle_irq;
+#endif
 }
 
 static void __init fixup_port_pio(int index,

arch/powerpc/platforms/85xx/p1022_ds.c

@@ -25,6 +25,7 @@
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include <asm/udbg.h>
 #include <asm/fsl_guts.h>
 #include "smp.h"
 

arch/powerpc/platforms/powernv/pci-ioda.c

@@ -204,11 +204,10 @@ static void __devinit pnv_ioda_offset_bus(struct pci_bus *bus,
 	pr_devel("  -> OBR %s [%x] +%016llx\n",
 		 bus->self ? pci_name(bus->self) : "root", flags, offset);
 
-	for (i = 0; i < 2; i++) {
-		r = bus->resource[i];
+	pci_bus_for_each_resource(bus, r, i) {
 		if (r && (r->flags & flags)) {
-			bus->resource[i]->start += offset;
-			bus->resource[i]->end += offset;
+			r->start += offset;
+			r->end += offset;
 		}
 	}
 	list_for_each_entry(dev, &bus->devices, bus_list)
@@ -288,12 +287,17 @@ static void __devinit pnv_ioda_calc_bus(struct pci_bus *bus, unsigned int flags,
 	 * assignment algorithm is going to be uber-trivial for now, we
 	 * can try to be smarter later at filling out holes.
 	 */
-	start = bus->self ? 0 : bus->resource[bres]->start;
-
-	/* Don't hand out IO 0 */
-	if ((flags & IORESOURCE_IO) && !bus->self)
-		start += 0x1000;
-
+	if (bus->self) {
+		/* No offset for downstream bridges */
+		start = 0;
+	} else {
+		/* Offset from the root */
+		if (flags & IORESOURCE_IO)
+			/* Don't hand out IO 0 */
+			start = hose->io_resource.start + 0x1000;
+		else
+			start = hose->mem_resources[0].start;
+	}
 	while(!list_empty(&head)) {
 		w = list_first_entry(&head, struct resource_wrap, link);
 		list_del(&w->link);
@@ -321,13 +325,20 @@ static void __devinit pnv_ioda_calc_bus(struct pci_bus *bus, unsigned int flags,
  empty:
 	/* Only setup P2P's, not the PHB itself */
 	if (bus->self) {
-		WARN_ON(bus->resource[bres] == NULL);
-		bus->resource[bres]->start = 0;
-		bus->resource[bres]->flags = (*size) ? flags : 0;
-		bus->resource[bres]->end = (*size) ? (*size - 1) : 0;
+		struct resource *res = bus->resource[bres];
+
+		if (WARN_ON(res == NULL))
+			return;
 
-		/* Clear prefetch bus resources for now */
-		bus->resource[2]->flags = 0;
+		/*
+		 * FIXME: We should probably export and call
+		 * pci_bridge_check_ranges() to properly re-initialize
+		 * the PCI portion of the flags here, and to detect
+		 * what the bridge actually supports.
+		 */
+		res->start = 0;
+		res->flags = (*size) ? flags : 0;
+		res->end = (*size) ? (*size - 1) : 0;
 	}
 
 	pr_devel("<- CBR %s [%x] *size=%016llx *align=%016llx\n",

arch/powerpc/platforms/pseries/Kconfig

@@ -122,7 +122,7 @@ config DTL
 	  Say N if you are unsure.
 
 config PSERIES_IDLE
-	tristate "Cpuidle driver for pSeries platforms"
+	bool "Cpuidle driver for pSeries platforms"
 	depends on CPU_IDLE
 	depends on PPC_PSERIES
 	default y

arch/powerpc/sysdev/fsl_pci.c

@@ -205,12 +205,12 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 
 	if (paddr_hi == paddr_lo) {
 		pr_err("%s: No outbound window space\n", name);
-		return ;
+		goto out;
 	}
 
 	if (paddr_lo == 0) {
 		pr_err("%s: No space for inbound window\n", name);
-		return ;
+		goto out;
 	}
 
 	/* setup PCSRBAR/PEXCSRBAR */
@@ -357,6 +357,7 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 			(u64)hose->dma_window_size);
 	}
 
+out:
 	iounmap(pci);
 }