Merge branch 'for-rmk/samsung3' of git://git.fluff.org/bjdooks/linux into devel-stable

.gitignore

@@ -37,6 +37,7 @@ modules.builtin
 tags
 TAGS
 vmlinux
+vmlinuz
 System.map
 Module.markers
 Module.symvers

Documentation/arm/Samsung/Overview.txt

@@ -0,0 +1,86 @@
+		Samsung ARM Linux Overview
+		==========================
+
+Introduction
+------------
+
+  The Samsung range of ARM SoCs spans many similar devices, from the initial
+  ARM9 through to the newest ARM cores. This document shows an overview of
+  the current kernel support, how to use it and where to find the code
+  that supports this.
+
+  The currently supported SoCs are:
+
+  - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
+  - S3C64XX: S3C6400 and S3C6410
+  - S5PC6440
+
+  S5PC100 and S5PC110 support is currently being merged
+
+
+S3C24XX Systems
+---------------
+
+  There is still documentation in Documnetation/arm/Samsung-S3C24XX/ which
+  deals with the architecture and drivers specific to these devices.
+
+  See Documentation/arm/Samsung-S3C24XX/Overview.txt for more information
+  on the implementation details and specific support.
+
+
+Configuration
+-------------
+
+  A number of configurations are supplied, as there is no current way of
+  unifying all the SoCs into one kernel.
+
+  s5p6440_defconfig - S5P6440 specific default configuration
+  s5pc100_defconfig - S5PC100 specific default configuration
+
+
+Layout
+------
+
+  The directory layout is currently being restructured, and consists of
+  several platform directories and then the machine specific directories
+  of the CPUs being built for.
+
+  plat-samsung provides the base for all the implementations, and is the
+  last in the line of include directories that are processed for the build
+  specific information. It contains the base clock, GPIO and device definitions
+  to get the system running.
+
+  plat-s3c is the s3c24xx/s3c64xx platform directory, although it is currently
+  involved in other builds this will be phased out once the relevant code is
+  moved elsewhere.
+
+  plat-s3c24xx is for s3c24xx specific builds, see the S3C24XX docs.
+
+  plat-s3c64xx is for the s3c64xx specific bits, see the S3C24XX docs.
+
+  plat-s5p is for s5p specific builds, more to be added.
+
+
+  [ to finish ]
+
+
+Port Contributors
+-----------------
+
+  Ben Dooks (BJD)
+  Vincent Sanders
+  Herbert Potzl
+  Arnaud Patard (RTP)
+  Roc Wu
+  Klaus Fetscher
+  Dimitry Andric
+  Shannon Holland
+  Guillaume Gourat (NexVision)
+  Christer Weinigel (wingel) (Acer N30)
+  Lucas Correia Villa Real (S3C2400 port)
+
+
+Document Author
+---------------
+
+Copyright 2009-2010 Ben Dooks <ben-linux@fluff.org>

Documentation/arm/Samsung/clksrc-change-registers.awk

@@ -0,0 +1,167 @@
+#!/usr/bin/awk -f
+#
+# Copyright 2010 Ben Dooks <ben-linux@fluff.org>
+#
+# Released under GPLv2
+
+# example usage
+# ./clksrc-change-registers.awk arch/arm/plat-s5pc1xx/include/plat/regs-clock.h < src > dst
+
+function extract_value(s)
+{
+    eqat = index(s, "=")
+    comat = index(s, ",")
+    return substr(s, eqat+2, (comat-eqat)-2)
+}
+
+function remove_brackets(b)
+{
+    return substr(b, 2, length(b)-2)
+}
+
+function splitdefine(l, p)
+{
+    r = split(l, tp)
+
+    p[0] = tp[2]
+    p[1] = remove_brackets(tp[3])
+}
+
+function find_length(f)
+{
+    if (0)
+	printf "find_length " f "\n" > "/dev/stderr"
+
+    if (f ~ /0x1/)
+	return 1
+    else if (f ~ /0x3/)
+	return 2
+    else if (f ~ /0x7/)
+	return 3
+    else if (f ~ /0xf/)
+	return 4
+
+    printf "unknown legnth " f "\n" > "/dev/stderr"
+    exit
+}
+
+function find_shift(s)
+{
+    id = index(s, "<")
+    if (id <= 0) {
+	printf "cannot find shift " s "\n" > "/dev/stderr"
+	exit
+    }
+
+    return substr(s, id+2)
+}
+
+
+BEGIN {
+    if (ARGC < 2) {
+	print "too few arguments" > "/dev/stderr"
+	exit
+    }
+
+# read the header file and find the mask values that we will need
+# to replace and create an associative array of values
+
+    while (getline line < ARGV[1] > 0) {
+	if (line ~ /\#define.*_MASK/ &&
+	    !(line ~ /S5PC100_EPLL_MASK/) &&
+	    !(line ~ /USB_SIG_MASK/)) {
+	    splitdefine(line, fields)
+	    name = fields[0]
+	    if (0)
+		printf "MASK " line "\n" > "/dev/stderr"
+	    dmask[name,0] = find_length(fields[1])
+	    dmask[name,1] = find_shift(fields[1])
+	    if (0)
+		printf "=> '" name "' LENGTH=" dmask[name,0] " SHIFT=" dmask[name,1] "\n" > "/dev/stderr"
+	} else {
+	}
+    }
+
+    delete ARGV[1]
+}
+
+/clksrc_clk.*=.*{/ {
+    shift=""
+    mask=""
+    divshift=""
+    reg_div=""
+    reg_src=""
+    indent=1
+
+    print $0
+
+    for(; indent >= 1;) {
+	if ((getline line) <= 0) {
+	    printf "unexpected end of file" > "/dev/stderr"
+	    exit 1;
+	}
+
+	if (line ~ /\.shift/) {
+	    shift = extract_value(line)
+	} else if (line ~ /\.mask/) {
+	    mask = extract_value(line)
+	} else if (line ~ /\.reg_divider/) {
+	    reg_div = extract_value(line)
+	} else if (line ~ /\.reg_source/) {
+	    reg_src = extract_value(line)
+	} else if (line ~ /\.divider_shift/) {
+	    divshift = extract_value(line)
+	} else if (line ~ /{/) {
+		indent++
+		print line
+	    } else if (line ~ /}/) {
+	    indent--
+
+	    if (indent == 0) {
+		if (0) {
+		    printf "shift '" shift   "' ='" dmask[shift,0] "'\n" > "/dev/stderr"
+		    printf "mask  '" mask    "'\n" > "/dev/stderr"
+		    printf "dshft '" divshift "'\n" > "/dev/stderr"
+		    printf "rdiv  '" reg_div "'\n" > "/dev/stderr"
+		    printf "rsrc  '" reg_src "'\n" > "/dev/stderr"
+		}
+
+		generated = mask
+		sub(reg_src, reg_div, generated)
+
+		if (0) {
+		    printf "/* rsrc " reg_src " */\n"
+		    printf "/* rdiv " reg_div " */\n"
+		    printf "/* shift " shift " */\n"
+		    printf "/* mask " mask " */\n"
+		    printf "/* generated " generated " */\n"
+		}
+
+		if (reg_div != "") {
+		    printf "\t.reg_div = { "
+		    printf ".reg = " reg_div ", "
+		    printf ".shift = " dmask[generated,1] ", "
+		    printf ".size = " dmask[generated,0] ", "
+		    printf "},\n"
+		}
+
+		printf "\t.reg_src = { "
+		printf ".reg = " reg_src ", "
+		printf ".shift = " dmask[mask,1] ", "
+		printf ".size = " dmask[mask,0] ", "
+
+		printf "},\n"
+
+	    }
+
+	    print line
+	} else {
+	    print line
+	}
+
+	if (0)
+	    printf indent ":" line "\n" > "/dev/stderr"
+    }
+}
+
+// && ! /clksrc_clk.*=.*{/ { print $0 }

Documentation/filesystems/proc.txt

@@ -177,7 +177,6 @@ read the file /proc/PID/status:
   CapBnd: ffffffffffffffff
   voluntary_ctxt_switches:        0
   nonvoluntary_ctxt_switches:     1
-  Stack usage:    12 kB
 
 This shows you nearly the same information you would get if you viewed it with
 the ps  command.  In  fact,  ps  uses  the  proc  file  system  to  obtain its
@@ -231,7 +230,6 @@ Table 1-2: Contents of the statm files (as of 2.6.30-rc7)
  Mems_allowed_list           Same as previous, but in "list format"
  voluntary_ctxt_switches     number of voluntary context switches
  nonvoluntary_ctxt_switches  number of non voluntary context switches
- Stack usage:                stack usage high water mark (round up to page size)
 ..............................................................................
 
 Table 1-3: Contents of the statm files (as of 2.6.8-rc3)

Documentation/hwmon/amc6821

@@ -0,0 +1,102 @@
+Kernel driver amc6821
+=====================
+
+Supported chips:
+	Texas Instruments AMC6821
+	Prefix: 'amc6821'
+	Addresses scanned: 0x18, 0x19, 0x1a, 0x2c, 0x2d, 0x2e, 0x4c, 0x4d, 0x4e
+	Datasheet: http://focus.ti.com/docs/prod/folders/print/amc6821.html
+
+Authors:
+	Tomaz Mertelj <tomaz.mertelj@guest.arnes.si>
+
+
+Description
+-----------
+
+This driver implements support for the Texas Instruments amc6821 chip.
+The chip has one on-chip and one remote temperature sensor and one pwm fan
+regulator.
+The pwm can be controlled either from software or automatically.
+
+The driver provides the following sensor accesses in sysfs:
+
+temp1_input		ro	on-chip temperature
+temp1_min		rw	"
+temp1_max		rw	"
+temp1_crit	 	rw	"
+temp1_min_alarm		ro	"
+temp1_max_alarm		ro	"
+temp1_crit_alarm	ro	"
+
+temp2_input		ro	remote temperature
+temp2_min		rw	"
+temp2_max		rw	"
+temp2_crit	 	rw	"
+temp2_min_alarm		ro	"
+temp2_max_alarm		ro	"
+temp2_crit_alarm	ro	"
+temp2_fault		ro	"
+
+fan1_input	 	ro	tachometer speed
+fan1_min		rw	"
+fan1_max		rw	"
+fan1_fault	 	ro	"
+fan1_div		rw	Fan divisor can be either 2 or 4.
+
+pwm1			rw	pwm1
+pwm1_enable		rw	regulator mode, 1=open loop, 2=fan controlled
+				by remote temperature, 3=fan controlled by
+				combination of the on-chip temperature and
+				remote-sensor temperature,
+pwm1_auto_channels_temp ro	1 if pwm_enable==2, 3 if pwm_enable==3
+pwm1_auto_point1_pwm	ro	Hardwired to 0, shared for both
+				temperature channels.
+pwm1_auto_point2_pwm	rw	This value is shared for both temperature
+				channels.
+pwm1_auto_point3_pwm	rw	Hardwired to 255, shared for both
+				temperature channels.
+
+temp1_auto_point1_temp	ro	Hardwired to temp2_auto_point1_temp
+				which is rw. Below this temperature fan stops.
+temp1_auto_point2_temp	rw	The low-temperature limit of the proportional
+				range. Below this temperature
+				pwm1 = pwm1_auto_point2_pwm. It can go from
+				0 degree C to 124 degree C in steps of
+				4 degree C. Read it out after writing to get
+				the actual value.
+temp1_auto_point3_temp	rw	Above this temperature fan runs at maximum
+				speed. It can go from temp1_auto_point2_temp.
+				It can only have certain discrete values
+				which depend on temp1_auto_point2_temp and
+				pwm1_auto_point2_pwm. Read it out after
+				writing to get the actual value.
+
+temp2_auto_point1_temp	rw	Must be between 0 degree C and 63 degree C and
+				it defines the passive cooling temperature.
+				Below this temperature the fan stops in
+				the closed loop mode.
+temp2_auto_point2_temp	rw	The low-temperature limit of the proportional
+				range. Below this temperature
+				pwm1 = pwm1_auto_point2_pwm. It can go from
+				0 degree C to 124 degree C in steps
+				of 4 degree C.
+
+temp2_auto_point3_temp	rw	Above this temperature fan runs at maximum
+				speed. It can only have certain discrete
+				values which depend on temp2_auto_point2_temp
+				and pwm1_auto_point2_pwm. Read it out after
+				writing to get actual value.
+
+
+Module parameters
+-----------------
+
+If your board has a BIOS that initializes the amc6821 correctly, you should
+load the module with: init=0.
+
+If your board BIOS doesn't initialize the chip, or you want
+different settings, you can set the following parameters:
+init=1,
+pwminv: 0 default pwm output, 1 inverts pwm output.
+

Documentation/hwmon/k10temp

@@ -3,8 +3,8 @@ Kernel driver k10temp
 
 Supported chips:
 * AMD Family 10h processors:
-  Socket F: Quad-Core/Six-Core/Embedded Opteron
-  Socket AM2+: Opteron, Phenom (II) X3/X4
+  Socket F: Quad-Core/Six-Core/Embedded Opteron (but see below)
+  Socket AM2+: Quad-Core Opteron, Phenom (II) X3/X4, Athlon X2 (but see below)
   Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II
   Socket S1G3: Athlon II, Sempron, Turion II
 * AMD Family 11h processors:
@@ -36,10 +36,15 @@ Description
 This driver permits reading of the internal temperature sensor of AMD
 Family 10h and 11h processors.
 
-All these processors have a sensor, but on older revisions of Family 10h
-processors, the sensor may return inconsistent values (erratum 319). The
-driver will refuse to load on these revisions unless you specify the
-"force=1" module parameter.
+All these processors have a sensor, but on those for Socket F or AM2+,
+the sensor may return inconsistent values (erratum 319).  The driver
+will refuse to load on these revisions unless you specify the "force=1"
+module parameter.
+
+Due to technical reasons, the driver can detect only the mainboard's
+socket type, not the processor's actual capabilities.  Therefore, if you
+are using an AM3 processor on an AM2+ mainboard, you can safely use the
+"force=1" parameter.
 
 There is one temperature measurement value, available as temp1_input in
 sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree.

Documentation/ioctl/ioctl-number.txt

@@ -56,10 +56,11 @@ Following this convention is good because:
 (5) When following the convention, the driver code can use generic
     code to copy the parameters between user and kernel space.
 
-This table lists ioctls visible from user land for Linux/i386.  It contains
-most drivers up to 2.3.14, but I know I am missing some.
+This table lists ioctls visible from user land for Linux/x86.  It contains
+most drivers up to 2.6.31, but I know I am missing some.  There has been
+no attempt to list non-X86 architectures or ioctls from drivers/staging/.
 
-Code	Seq#	Include File		Comments
+Code  Seq#(hex)	Include File		Comments
 ========================================================
 0x00	00-1F	linux/fs.h		conflict!
 0x00	00-1F	scsi/scsi_ioctl.h	conflict!
@@ -69,119 +70,228 @@ Code	Seq#	Include File		Comments
 0x03	all	linux/hdreg.h
 0x04	D2-DC	linux/umsdos_fs.h	Dead since 2.6.11, but don't reuse these.
 0x06	all	linux/lp.h
-0x09	all	linux/md.h
+0x09	all	linux/raid/md_u.h
+0x10	00-0F	drivers/char/s390/vmcp.h
 0x12	all	linux/fs.h
 		linux/blkpg.h
 0x1b	all	InfiniBand Subsystem	<http://www.openib.org/>
 0x20	all	drivers/cdrom/cm206.h
 0x22	all	scsi/sg.h
 '#'	00-3F	IEEE 1394 Subsystem	Block for the entire subsystem
+'$'	00-0F	linux/perf_counter.h, linux/perf_event.h
 '1'	00-1F	<linux/timepps.h>	PPS kit from Ulrich Windl
 					<ftp://ftp.de.kernel.org/pub/linux/daemons/ntp/PPS/>
+'2'	01-04	linux/i2o.h
+'3'	00-0F	drivers/s390/char/raw3270.h	conflict!
+'3'	00-1F	linux/suspend_ioctls.h	conflict!
+		and kernel/power/user.c
 '8'	all				SNP8023 advanced NIC card
 					<mailto:mcr@solidum.com>
-'A'	00-1F	linux/apm_bios.h
+'@'	00-0F	linux/radeonfb.h	conflict!
+'@'	00-0F	drivers/video/aty/aty128fb.c	conflict!
+'A'	00-1F	linux/apm_bios.h	conflict!
+'A'	00-0F	linux/agpgart.h		conflict!
+		and drivers/char/agp/compat_ioctl.h
+'A'	00-7F	sound/asound.h		conflict!
+'B'	00-1F	linux/cciss_ioctl.h	conflict!
+'B'	00-0F	include/linux/pmu.h	conflict!
 'B'	C0-FF				advanced bbus
 					<mailto:maassen@uni-freiburg.de>
-'C'	all	linux/soundcard.h
+'C'	all	linux/soundcard.h	conflict!
+'C'	01-2F	linux/capi.h		conflict!
+'C'	F0-FF	drivers/net/wan/cosa.h	conflict!
 'D'	all	arch/s390/include/asm/dasd.h
-'E'	all	linux/input.h
-'F'	all	linux/fb.h
-'H'	all	linux/hiddev.h
-'I'	all	linux/isdn.h
+'D'	40-5F	drivers/scsi/dpt/dtpi_ioctl.h
+'D'	05	drivers/scsi/pmcraid.h
+'E'	all	linux/input.h		conflict!
+'E'	00-0F	xen/evtchn.h		conflict!
+'F'	all	linux/fb.h		conflict!
+'F'	01-02	drivers/scsi/pmcraid.h	conflict!
+'F'	20	drivers/video/fsl-diu-fb.h	conflict!
+'F'	20	drivers/video/intelfb/intelfb.h	conflict!
+'F'	20	linux/ivtvfb.h		conflict!
+'F'	20	linux/matroxfb.h	conflict!
+'F'	20	drivers/video/aty/atyfb_base.c	conflict!
+'F'	00-0F	video/da8xx-fb.h	conflict!
+'F'	80-8F	linux/arcfb.h		conflict!
+'F'	DD	video/sstfb.h		conflict!
+'G'	00-3F	drivers/misc/sgi-gru/grulib.h	conflict!
+'G'	00-0F	linux/gigaset_dev.h	conflict!
+'H'	00-7F	linux/hiddev.h		conflict!
+'H'	00-0F	linux/hidraw.h		conflict!
+'H'	00-0F	sound/asound.h		conflict!
+'H'	20-40	sound/asound_fm.h	conflict!
+'H'	80-8F	sound/sfnt_info.h	conflict!
+'H'	10-8F	sound/emu10k1.h		conflict!
+'H'	10-1F	sound/sb16_csp.h	conflict!
+'H'	10-1F	sound/hda_hwdep.h	conflict!
+'H'	40-4F	sound/hdspm.h		conflict!
+'H'	40-4F	sound/hdsp.h		conflict!
+'H'	90	sound/usb/usx2y/usb_stream.h
+'H'	C0-F0	net/bluetooth/hci.h	conflict!
+'H'	C0-DF	net/bluetooth/hidp/hidp.h	conflict!
+'H'	C0-DF	net/bluetooth/cmtp/cmtp.h	conflict!
+'H'	C0-DF	net/bluetooth/bnep/bnep.h	conflict!
+'I'	all	linux/isdn.h		conflict!
+'I'	00-0F	drivers/isdn/divert/isdn_divert.h	conflict!
+'I'	40-4F	linux/mISDNif.h		conflict!
 'J'	00-1F	drivers/scsi/gdth_ioctl.h
 'K'	all	linux/kd.h
-'L'	00-1F	linux/loop.h
-'L'	20-2F	driver/usb/misc/vstusb.h
+'L'	00-1F	linux/loop.h		conflict!
+'L'	10-1F	drivers/scsi/mpt2sas/mpt2sas_ctl.h	conflict!
+'L'	20-2F	linux/usb/vstusb.h
 'L'	E0-FF	linux/ppdd.h		encrypted disk device driver
 					<http://linux01.gwdg.de/~alatham/ppdd.html>
-'M'	all	linux/soundcard.h
+'M'	all	linux/soundcard.h	conflict!
+'M'	01-16	mtd/mtd-abi.h		conflict!
+		and drivers/mtd/mtdchar.c
+'M'	01-03	drivers/scsi/megaraid/megaraid_sas.h
+'M'	00-0F	drivers/video/fsl-diu-fb.h	conflict!
 'N'	00-1F	drivers/usb/scanner.h
-'O'     00-02   include/mtd/ubi-user.h UBI
-'P'	all	linux/soundcard.h
+'O'     00-06   mtd/ubi-user.h		UBI
+'P'	all	linux/soundcard.h	conflict!
+'P'	60-6F	sound/sscape_ioctl.h	conflict!
+'P'	00-0F	drivers/usb/class/usblp.c	conflict!
 'Q'	all	linux/soundcard.h
-'R'	00-1F	linux/random.h
+'R'	00-1F	linux/random.h		conflict!
+'R'	01	linux/rfkill.h		conflict!
+'R'	01-0F	media/rds.h		conflict!
+'R'	C0-DF	net/bluetooth/rfcomm.h
 'S'	all	linux/cdrom.h		conflict!
 'S'	80-81	scsi/scsi_ioctl.h	conflict!
 'S'	82-FF	scsi/scsi.h		conflict!
+'S'	00-7F	sound/asequencer.h	conflict!
 'T'	all	linux/soundcard.h	conflict!
+'T'	00-AF	sound/asound.h		conflict!
 'T'	all	arch/x86/include/asm/ioctls.h	conflict!
-'U'	00-EF	linux/drivers/usb/usb.h
-'V'	all	linux/vt.h
+'T'	C0-DF	linux/if_tun.h		conflict!
+'U'	all	sound/asound.h		conflict!
+'U'	00-0F	drivers/media/video/uvc/uvcvideo.h	conflict!
+'U'	00-CF	linux/uinput.h		conflict!
+'U'	00-EF	linux/usbdevice_fs.h
+'U'	C0-CF	drivers/bluetooth/hci_uart.h
+'V'	all	linux/vt.h		conflict!
+'V'	all	linux/videodev2.h	conflict!
+'V'	C0	linux/ivtvfb.h		conflict!
+'V'	C0	linux/ivtv.h		conflict!
+'V'	C0	media/davinci/vpfe_capture.h	conflict!
+'V'	C0	media/si4713.h		conflict!
+'V'	C0-CF	drivers/media/video/mxb.h	conflict!
 'W'	00-1F	linux/watchdog.h	conflict!
 'W'	00-1F	linux/wanrouter.h	conflict!
-'X'	all	linux/xfs_fs.h
+'W'	00-3F	sound/asound.h		conflict!
+'X'	all	fs/xfs/xfs_fs.h		conflict!
+		and fs/xfs/linux-2.6/xfs_ioctl32.h
+		and include/linux/falloc.h
+		and linux/fs.h
+'X'	all	fs/ocfs2/ocfs_fs.h	conflict!
+'X'	01	linux/pktcdvd.h		conflict!
 'Y'	all	linux/cyclades.h
-'['	00-07	linux/usb/usbtmc.h	USB Test and Measurement Devices
+'Z'	14-15	drivers/message/fusion/mptctl.h
+'['	00-07	linux/usb/tmc.h		USB Test and Measurement Devices
 					<mailto:gregkh@suse.de>
-'a'	all				ATM on linux
+'a'	all	linux/atm*.h, linux/sonet.h	ATM on linux
 					<http://lrcwww.epfl.ch/linux-atm/magic.html>
-'b'	00-FF				bit3 vme host bridge
+'b'	00-FF				conflict! bit3 vme host bridge
 					<mailto:natalia@nikhefk.nikhef.nl>
+'b'	00-0F	media/bt819.h		conflict!
+'c'	all	linux/cm4000_cs.h	conflict!
 'c'	00-7F	linux/comstats.h	conflict!
 'c'	00-7F	linux/coda.h		conflict!
-'c'	80-9F	arch/s390/include/asm/chsc.h
-'c'	A0-AF   arch/x86/include/asm/msr.h
+'c'	00-1F	linux/chio.h		conflict!
+'c'	80-9F	arch/s390/include/asm/chsc.h	conflict!
+'c'	A0-AF   arch/x86/include/asm/msr.h	conflict!
 'd'	00-FF	linux/char/drm/drm/h	conflict!
+'d'	02-40	pcmcia/ds.h		conflict!
+'d'	10-3F	drivers/media/video/dabusb.h	conflict!
+'d'	C0-CF	drivers/media/video/saa7191.h	conflict!
 'd'	F0-FF	linux/digi1.h
 'e'	all	linux/digi1.h		conflict!
-'e'	00-1F	net/irda/irtty.h	conflict!
-'f'	00-1F	linux/ext2_fs.h
-'h'	00-7F				Charon filesystem
+'e'	00-1F	drivers/net/irda/irtty-sir.h	conflict!
+'f'	00-1F	linux/ext2_fs.h		conflict!
+'f'	00-1F	linux/ext3_fs.h		conflict!
+'f'	00-0F	fs/jfs/jfs_dinode.h	conflict!
+'f'	00-0F	fs/ext4/ext4.h		conflict!
+'f'	00-0F	linux/fs.h		conflict!
+'f'	00-0F	fs/ocfs2/ocfs2_fs.h	conflict!
+'g'	00-0F	linux/usb/gadgetfs.h
+'g'	20-2F	linux/usb/g_printer.h
+'h'	00-7F				conflict! Charon filesystem
 					<mailto:zapman@interlan.net>
-'i'	00-3F	linux/i2o.h
+'h'	00-1F	linux/hpet.h		conflict!
+'i'	00-3F	linux/i2o-dev.h		conflict!
+'i'	0B-1F	linux/ipmi.h		conflict!
+'i'	80-8F	linux/i8k.h
 'j'	00-3F	linux/joystick.h
+'k'	00-0F	linux/spi/spidev.h	conflict!
+'k'	00-05	video/kyro.h		conflict!
 'l'	00-3F	linux/tcfs_fs.h		transparent cryptographic file system
 					<http://mikonos.dia.unisa.it/tcfs>
 'l'	40-7F	linux/udf_fs_i.h	in development:
 					<http://sourceforge.net/projects/linux-udf/>
-'m'	00-09	linux/mmtimer.h
+'m'	00-09	linux/mmtimer.h		conflict!
 'm'	all	linux/mtio.h		conflict!
 'm'	all	linux/soundcard.h	conflict!
 'm'	all	linux/synclink.h	conflict!
+'m'	00-19	drivers/message/fusion/mptctl.h	conflict!
+'m'	00	drivers/scsi/megaraid/megaraid_ioctl.h	conflict!
 'm'	00-1F	net/irda/irmod.h	conflict!
-'n'	00-7F	linux/ncp_fs.h
+'n'	00-7F	linux/ncp_fs.h and fs/ncpfs/ioctl.c
 'n'	80-8F	linux/nilfs2_fs.h	NILFS2
-'n'	E0-FF	video/matrox.h          matroxfb
+'n'	E0-FF	linux/matroxfb.h	matroxfb
 'o'	00-1F	fs/ocfs2/ocfs2_fs.h	OCFS2
-'o'     00-03   include/mtd/ubi-user.h  conflict! (OCFS2 and UBI overlaps)
-'o'     40-41   include/mtd/ubi-user.h  UBI
-'o'     01-A1   include/linux/dvb/*.h DVB
+'o'     00-03   mtd/ubi-user.h		conflict! (OCFS2 and UBI overlaps)
+'o'     40-41   mtd/ubi-user.h		UBI
+'o'     01-A1   linux/dvb/*.h		DVB
 'p'	00-0F	linux/phantom.h		conflict! (OpenHaptics needs this)
+'p'	00-1F	linux/rtc.h		conflict!
 'p'	00-3F	linux/mc146818rtc.h	conflict!
 'p'	40-7F	linux/nvram.h
-'p'	80-9F				user-space parport
+'p'	80-9F	linux/ppdev.h		user-space parport
 					<mailto:tim@cyberelk.net>
-'p'	a1-a4	linux/pps.h		LinuxPPS
+'p'	A1-A4	linux/pps.h		LinuxPPS
 					<mailto:giometti@linux.it>
 'q'	00-1F	linux/serio.h
-'q'	80-FF				Internet PhoneJACK, Internet LineJACK
-					<http://www.quicknet.net>
-'r'	00-1F	linux/msdos_fs.h
+'q'	80-FF	linux/telephony.h	Internet PhoneJACK, Internet LineJACK
+		linux/ixjuser.h		<http://www.quicknet.net>
+'r'	00-1F	linux/msdos_fs.h and fs/fat/dir.c
 's'	all	linux/cdk.h
 't'	00-7F	linux/if_ppp.h
 't'	80-8F	linux/isdn_ppp.h
+'t'	90	linux/toshiba.h
 'u'	00-1F	linux/smb_fs.h
-'v'	00-1F	linux/ext2_fs.h		conflict!
 'v'	all	linux/videodev.h	conflict!
+'v'	00-1F	linux/ext2_fs.h		conflict!
+'v'	00-1F	linux/fs.h		conflict!
+'v'	00-0F	linux/sonypi.h		conflict!
+'v'	C0-CF	drivers/media/video/ov511.h	conflict!
+'v'	C0-DF	media/pwc-ioctl.h	conflict!
+'v'	C0-FF	linux/meye.h		conflict!
+'v'	C0-CF	drivers/media/video/zoran/zoran.h	conflict!
+'v'	D0-DF	drivers/media/video/cpia2/cpia2dev.h	conflict!
 'w'	all				CERN SCI driver
 'y'	00-1F				packet based user level communications
 					<mailto:zapman@interlan.net>
-'z'	00-3F				CAN bus card
+'z'	00-3F				CAN bus card	conflict!
 					<mailto:hdstich@connectu.ulm.circular.de>
-'z'	40-7F				CAN bus card
+'z'	40-7F				CAN bus card	conflict!
 					<mailto:oe@port.de>
+'z'	10-4F	drivers/s390/crypto/zcrypt_api.h	conflict!
 0x80	00-1F	linux/fb.h
 0x81	00-1F	linux/videotext.h
+0x88	00-3F	media/ovcamchip.h
 0x89	00-06	arch/x86/include/asm/sockios.h
 0x89	0B-DF	linux/sockios.h
 0x89	E0-EF	linux/sockios.h		SIOCPROTOPRIVATE range
+0x89	E0-EF	linux/dn.h		PROTOPRIVATE range
 0x89	F0-FF	linux/sockios.h		SIOCDEVPRIVATE range
 0x8B	all	linux/wireless.h
 0x8C	00-3F				WiNRADiO driver
 					<http://www.proximity.com.au/~brian/winradio/>
 0x90	00	drivers/cdrom/sbpcd.h
+0x92	00-0F	drivers/usb/mon/mon_bin.c
 0x93	60-7F	linux/auto_fs.h
+0x94	all	fs/btrfs/ioctl.h
 0x99	00-0F				537-Addinboard driver
 					<mailto:buk@buks.ipn.de>
 0xA0	all	linux/sdp/sdp.h		Industrial Device Project
@@ -192,17 +302,22 @@ Code	Seq#	Include File		Comments
 0xAB	00-1F	linux/nbd.h
 0xAC	00-1F	linux/raw.h
 0xAD	00	Netfilter device	in development:
-					<mailto:rusty@rustcorp.com.au>	
+					<mailto:rusty@rustcorp.com.au>
 0xAE	all	linux/kvm.h		Kernel-based Virtual Machine
 					<mailto:kvm@vger.kernel.org>
 0xB0	all	RATIO devices		in development:
 					<mailto:vgo@ratio.de>
 0xB1	00-1F	PPPoX			<mailto:mostrows@styx.uwaterloo.ca>
+0xC0	00-0F	linux/usb/iowarrior.h
 0xCB	00-1F	CBM serial IEC bus	in development:
 					<mailto:michael.klein@puffin.lb.shuttle.de>
+0xCD	01	linux/reiserfs_fs.h
+0xCF	02	fs/cifs/ioctl.c
+0xDB	00-0F	drivers/char/mwave/mwavepub.h
 0xDD	00-3F	ZFCP device driver	see drivers/s390/scsi/
 					<mailto:aherrman@de.ibm.com>
-0xF3	00-3F	video/sisfb.h		sisfb (in development)
+0xF3	00-3F	drivers/usb/misc/sisusbvga/sisusb.h	sisfb (in development)
 					<mailto:thomas@winischhofer.net>
 0xF4	00-1F	video/mbxfb.h		mbxfb
 					<mailto:raph@8d.com>
+0xFD	all	linux/dm-ioctl.h

Documentation/kernel-doc-nano-HOWTO.txt

@@ -214,11 +214,13 @@ The format of the block comment is like this:
  * (section header: (section description)? )*
 (*)?*/
 
-The short function description ***cannot be multiline***, but the other
-descriptions can be (and they can contain blank lines).  If you continue
-that initial short description onto a second line, that second line will
-appear further down at the beginning of the description section, which is
-almost certainly not what you had in mind.
+All "description" text can span multiple lines, although the
+function_name & its short description are traditionally on a single line.
+Description text may also contain blank lines (i.e., lines that contain
+only a "*").
+
+"section header:" names must be unique per function (or struct,
+union, typedef, enum).
 
 Avoid putting a spurious blank line after the function name, or else the
 description will be repeated!

Documentation/networking/3c509.txt

@@ -48,11 +48,11 @@ for LILO parameters for doing this:
 This configures the first found 3c509 card for IRQ 10, base I/O 0x310, and
 transceiver type 3 (10base2). The flag "0x3c509" must be set to avoid conflicts
 with other card types when overriding the I/O address. When the driver is
-loaded as a module, only the IRQ and transceiver setting may be overridden.
-For example, setting two cards to 10base2/IRQ10 and AUI/IRQ11 is done by using
-the xcvr and irq module options:
+loaded as a module, only the IRQ may be overridden. For example,
+setting two cards to IRQ10 and IRQ11 is done by using the irq module
+option:
 
-   options 3c509 xcvr=3,1 irq=10,11
+   options 3c509 irq=10,11
 
 
 (2) Full-duplex mode
@@ -77,6 +77,8 @@ operation.
 itself full-duplex capable. This is almost certainly one of two things: a full-
 duplex-capable  Ethernet switch (*not* a hub), or a full-duplex-capable NIC on
 another system that's connected directly to the 3c509B via a crossover cable.
+
+Full-duplex mode can be enabled using 'ethtool'.
  
 /////Extremely important caution concerning full-duplex mode/////
 Understand that the 3c509B's hardware's full-duplex support is much more
@@ -113,6 +115,8 @@ This insured that merely upgrading the driver from an earlier version would
 never automatically enable full-duplex mode in an existing installation;
 it must always be explicitly enabled via one of these code in order to be
 activated.
+
+The transceiver type can be changed using 'ethtool'.
   
 
 (4a) Interpretation of error messages and common problems

Documentation/trace/ring-buffer-design.txt

@@ -33,9 +33,9 @@ head_page - a pointer to the page that the reader will use next
 
 tail_page - a pointer to the page that will be written to next
 
-commit_page - a pointer to the page with the last finished non nested write.
+commit_page - a pointer to the page with the last finished non-nested write.
 
-cmpxchg - hardware assisted atomic transaction that performs the following:
+cmpxchg - hardware-assisted atomic transaction that performs the following:
 
    A = B iff previous A == C
 
@@ -52,15 +52,15 @@ The Generic Ring Buffer
 The ring buffer can be used in either an overwrite mode or in
 producer/consumer mode.
 
-Producer/consumer mode is where the producer were to fill up the
+Producer/consumer mode is where if the producer were to fill up the
 buffer before the consumer could free up anything, the producer
 will stop writing to the buffer. This will lose most recent events.
 
-Overwrite mode is where the produce were to fill up the buffer
+Overwrite mode is where if the producer were to fill up the buffer
 before the consumer could free up anything, the producer will
 overwrite the older data. This will lose the oldest events.
 
-No two writers can write at the same time (on the same per cpu buffer),
+No two writers can write at the same time (on the same per-cpu buffer),
 but a writer may interrupt another writer, but it must finish writing
 before the previous writer may continue. This is very important to the
 algorithm. The writers act like a "stack". The way interrupts works
@@ -79,16 +79,16 @@ the interrupt doing a write as well.
 
 Readers can happen at any time. But no two readers may run at the
 same time, nor can a reader preempt/interrupt another reader. A reader
-can not preempt/interrupt a writer, but it may read/consume from the
+cannot preempt/interrupt a writer, but it may read/consume from the
 buffer at the same time as a writer is writing, but the reader must be
 on another processor to do so. A reader may read on its own processor
 and can be preempted by a writer.
 
-A writer can preempt a reader, but a reader can not preempt a writer.
+A writer can preempt a reader, but a reader cannot preempt a writer.
 But a reader can read the buffer at the same time (on another processor)
 as a writer.
 
-The ring buffer is made up of a list of pages held together by a link list.
+The ring buffer is made up of a list of pages held together by a linked list.
 
 At initialization a reader page is allocated for the reader that is not
 part of the ring buffer.
@@ -102,7 +102,7 @@ the head page.
 
 The reader has its own page to use. At start up time, this page is
 allocated but is not attached to the list. When the reader wants
-to read from the buffer, if its page is empty (like it is on start up)
+to read from the buffer, if its page is empty (like it is on start-up),
 it will swap its page with the head_page. The old reader page will
 become part of the ring buffer and the head_page will be removed.
 The page after the inserted page (old reader_page) will become the
@@ -206,7 +206,7 @@ The main pointers:
 
   commit page - the page that last finished a write.
 
-The commit page only is updated by the outer most writer in the
+The commit page only is updated by the outermost writer in the
 writer stack. A writer that preempts another writer will not move the
 commit page.
 
@@ -281,7 +281,7 @@ with the previous write.
 The commit pointer points to the last write location that was
 committed without preempting another write. When a write that
 preempted another write is committed, it only becomes a pending commit
-and will not be a full commit till all writes have been committed.
+and will not be a full commit until all writes have been committed.
 
 The commit page points to the page that has the last full commit.
 The tail page points to the page with the last write (before
@@ -292,7 +292,7 @@ be several pages ahead. If the tail page catches up to the commit
 page then no more writes may take place (regardless of the mode
 of the ring buffer: overwrite and produce/consumer).
 
-The order of pages are:
+The order of pages is:
 
  head page
  commit page
@@ -311,7 +311,7 @@ Possible scenario:
 There is a special case that the head page is after either the commit page
 and possibly the tail page. That is when the commit (and tail) page has been
 swapped with the reader page. This is because the head page is always
-part of the ring buffer, but the reader page is not. When ever there
+part of the ring buffer, but the reader page is not. Whenever there
 has been less than a full page that has been committed inside the ring buffer,
 and a reader swaps out a page, it will be swapping out the commit page.
 
@@ -338,7 +338,7 @@ and a reader swaps out a page, it will be swapping out the commit page.
 In this case, the head page will not move when the tail and commit
 move back into the ring buffer.
 
-The reader can not swap a page into the ring buffer if the commit page
+The reader cannot swap a page into the ring buffer if the commit page
 is still on that page. If the read meets the last commit (real commit
 not pending or reserved), then there is nothing more to read.
 The buffer is considered empty until another full commit finishes.
@@ -395,7 +395,7 @@ The main idea behind the lockless algorithm is to combine the moving
 of the head_page pointer with the swapping of pages with the reader.
 State flags are placed inside the pointer to the page. To do this,
 each page must be aligned in memory by 4 bytes. This will allow the 2
-least significant bits of the address to be used as flags. Since
+least significant bits of the address to be used as flags, since
 they will always be zero for the address. To get the address,
 simply mask out the flags.
 
@@ -460,7 +460,7 @@ When the reader tries to swap the page with the ring buffer, it
 will also use cmpxchg. If the flag bit in the pointer to the
 head page does not have the HEADER flag set, the compare will fail
 and the reader will need to look for the new head page and try again.
-Note, the flag UPDATE and HEADER are never set at the same time.
+Note, the flags UPDATE and HEADER are never set at the same time.
 
 The reader swaps the reader page as follows:
 
@@ -539,7 +539,7 @@ updated to the reader page.
     |  +-----------------------------+   |
     +------------------------------------+
 
-Another important point. The page that the reader page points back to
+Another important point: The page that the reader page points back to
 by its previous pointer (the one that now points to the new head page)
 never points back to the reader page. That is because the reader page is
 not part of the ring buffer. Traversing the ring buffer via the next pointers
@@ -572,7 +572,7 @@ not be able to swap the head page from the buffer, nor will it be able to
 move the head page, until the writer is finished with the move.
 
 This eliminates any races that the reader can have on the writer. The reader
-must spin, and this is why the reader can not preempt the writer.
+must spin, and this is why the reader cannot preempt the writer.
 
             tail page
                |
@@ -659,9 +659,9 @@ before pushing the head page. If it is, then it can be assumed that the
 tail page wrapped the buffer, and we must drop new writes.
 
 This is not a race condition, because the commit page can only be moved
-by the outter most writer (the writer that was preempted).
+by the outermost writer (the writer that was preempted).
 This means that the commit will not move while a writer is moving the
-tail page. The reader can not swap the reader page if it is also being
+tail page. The reader cannot swap the reader page if it is also being
 used as the commit page. The reader can simply check that the commit
 is off the reader page. Once the commit page leaves the reader page
 it will never go back on it unless a reader does another swap with the
@@ -733,7 +733,7 @@ The write converts the head page pointer to UPDATE.
 --->|   |<---|   |<---|   |<---|   |<---
     +---+    +---+    +---+    +---+
 
-But if a nested writer preempts here. It will see that the next
+But if a nested writer preempts here, it will see that the next
 page is a head page, but it is also nested. It will detect that
 it is nested and will save that information. The detection is the
 fact that it sees the UPDATE flag instead of a HEADER or NORMAL
@@ -761,7 +761,7 @@ to NORMAL.
 --->|   |<---|   |<---|   |<---|   |<---
     +---+    +---+    +---+    +---+
 
-After the nested writer finishes, the outer most writer will convert
+After the nested writer finishes, the outermost writer will convert
 the UPDATE pointer to NORMAL.
 
 
@@ -812,7 +812,7 @@ head page.
     +---+    +---+    +---+    +---+
 
 The nested writer moves the tail page forward. But does not set the old
-update page to NORMAL because it is not the outer most writer.
+update page to NORMAL because it is not the outermost writer.
 
                     tail page
                         |
@@ -892,7 +892,7 @@ It will return to the first writer.
 --->|   |<---|   |<---|   |<---|   |<---
     +---+    +---+    +---+    +---+
 
-The first writer can not know atomically test if the tail page moved
+The first writer cannot know atomically if the tail page moved
 while it updates the HEAD page. It will then update the head page to
 what it thinks is the new head page.
 
@@ -923,9 +923,9 @@ if the tail page is either where it use to be or on the next page:
 --->|   |<---|   |<---|   |<---|   |<---
     +---+    +---+    +---+    +---+
 
-If tail page != A and tail page does not equal B, then it must reset the
-pointer back to NORMAL. The fact that it only needs to worry about
-nested writers, it only needs to check this after setting the HEAD page.
+If tail page != A and tail page != B, then it must reset the pointer
+back to NORMAL. The fact that it only needs to worry about nested
+writers means that it only needs to check this after setting the HEAD page.
 
 
 (first writer)
@@ -939,7 +939,7 @@ nested writers, it only needs to check this after setting the HEAD page.
     +---+    +---+    +---+    +---+
 
 Now the writer can update the head page. This is also why the head page must
-remain in UPDATE and only reset by the outer most writer. This prevents
+remain in UPDATE and only reset by the outermost writer. This prevents
 the reader from seeing the incorrect head page.
 
 

MAINTAINERS

@@ -3940,29 +3940,20 @@ S:	Maintained
 F:	sound/soc/omap/
 
 OMAP FRAMEBUFFER SUPPORT
-M:	Imre Deak <imre.deak@nokia.com>
+M:	Tomi Valkeinen <tomi.valkeinen@nokia.com>
 L:	linux-fbdev@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/video/omap/
 
-OMAP DISPLAY SUBSYSTEM SUPPORT (DSS2)
+OMAP DISPLAY SUBSYSTEM and FRAMEBUFFER SUPPORT (DSS2)
 M:	Tomi Valkeinen <tomi.valkeinen@nokia.com>
 L:	linux-omap@vger.kernel.org
-L:	linux-fbdev@vger.kernel.org (moderated for non-subscribers)
+L:	linux-fbdev@vger.kernel.org
 S:	Maintained
-F:	drivers/video/omap2/dss/
-F:	drivers/video/omap2/vrfb.c
-F:	drivers/video/omap2/vram.c
+F:	drivers/video/omap2/
 F:	Documentation/arm/OMAP/DSS
 
-OMAP FRAMEBUFFER SUPPORT (FOR DSS2)
-M:	Tomi Valkeinen <tomi.valkeinen@nokia.com>
-L:	linux-omap@vger.kernel.org
-L:	linux-fbdev@vger.kernel.org (moderated for non-subscribers)
-S:	Maintained
-F:	drivers/video/omap2/omapfb/
-
 OMAP MMC SUPPORT
 M:	Jarkko Lavinen <jarkko.lavinen@nokia.com>
 L:	linux-omap@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 33
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -18,10 +18,9 @@ MAKEFLAGS += -rR --no-print-directory
 
 # Avoid funny character set dependencies
 unexport LC_ALL
-LC_CTYPE=C
 LC_COLLATE=C
 LC_NUMERIC=C
-export LC_CTYPE LC_COLLATE LC_NUMERIC
+export LC_COLLATE LC_NUMERIC
 
 # We are using a recursive build, so we need to do a little thinking
 # to get the ordering right.

arch/arm/Kconfig

@@ -18,6 +18,8 @@ config ARM
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_GENERIC_DMA_COHERENT
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_LZO
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -631,6 +633,14 @@ config ARCH_S3C64XX
 	help
 	  Samsung S3C64XX series based systems
 
+config ARCH_S5P6440
+	bool "Samsung S5P6440"
+	select CPU_V6
+	select GENERIC_GPIO
+	select HAVE_CLK
+	help
+	  Samsung S5P6440 CPU based systems
+
 config ARCH_S5PC1XX
 	bool "Samsung S5PC1XX"
 	select GENERIC_GPIO
@@ -688,6 +698,7 @@ config ARCH_DAVINCI
 	select HAVE_IDE
 	select COMMON_CLKDEV
 	select GENERIC_ALLOCATOR
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's DaVinci platform.
 
@@ -775,6 +786,7 @@ source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
+source "arch/arm/plat-s5p/Kconfig"
 source "arch/arm/plat-s5pc1xx/Kconfig"
 
 if ARCH_S3C2410
@@ -791,6 +803,8 @@ source "arch/arm/mach-s3c6400/Kconfig"
 source "arch/arm/mach-s3c6410/Kconfig"
 endif
 
+source "arch/arm/mach-s5p6440/Kconfig"
+
 source "arch/arm/plat-stmp3xxx/Kconfig"
 
 if ARCH_S5PC1XX
@@ -1071,7 +1085,7 @@ source kernel/Kconfig.preempt
 config HZ
 	int
 	default 128 if ARCH_L7200
-	default 200 if ARCH_EBSA110 || ARCH_S3C2410
+	default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440
 	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
 	default AT91_TIMER_HZ if ARCH_AT91
 	default 100

arch/arm/Makefile

@@ -161,6 +161,7 @@ machine-$(CONFIG_ARCH_RPC)		:= rpc
 machine-$(CONFIG_ARCH_S3C2410)		:= s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
 machine-$(CONFIG_ARCH_S3C24A0)		:= s3c24a0
 machine-$(CONFIG_ARCH_S3C64XX)		:= s3c6400 s3c6410
+machine-$(CONFIG_ARCH_S5P6440)		:= s5p6440
 machine-$(CONFIG_ARCH_S5PC1XX)		:= s5pc100
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
@@ -184,6 +185,7 @@ plat-$(CONFIG_PLAT_PXA)		:= pxa
 plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c samsung
 plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c samsung
 plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c samsung
+plat-$(CONFIG_PLAT_S5P)		:= s5p samsung s3c
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)

arch/arm/boot/compressed/Makefile

@@ -63,8 +63,12 @@ endif
 
 SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
 
-targets       := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \
-		 head.o misc.o $(OBJS)
+suffix_$(CONFIG_KERNEL_GZIP) = gzip
+suffix_$(CONFIG_KERNEL_LZO)  = lzo
+
+targets       := vmlinux vmlinux.lds \
+		 piggy.$(suffix_y) piggy.$(suffix_y).o \
+		 font.o font.c head.o misc.o $(OBJS)
 
 ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
@@ -87,22 +91,34 @@ endif
 ifneq ($(PARAMS_PHYS),)
 LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS)
 endif
-LDFLAGS_vmlinux += -p --no-undefined -X \
-	$(shell $(CC) $(KBUILD_CFLAGS) --print-libgcc-file-name) -T
+# ?
+LDFLAGS_vmlinux += -p
+# Report unresolved symbol references
+LDFLAGS_vmlinux += --no-undefined
+# Delete all temporary local symbols
+LDFLAGS_vmlinux += -X
+# Next argument is a linker script
+LDFLAGS_vmlinux += -T
+
+# For __aeabi_uidivmod
+lib1funcs = $(obj)/lib1funcs.o
+
+$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
+	$(call cmd,shipped)
 
 # Don't allow any static data in misc.o, which
 # would otherwise mess up our GOT table
 CFLAGS_misc.o := -Dstatic=
 
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
-	 	$(addprefix $(obj)/, $(OBJS)) FORCE
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
+	 	$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
 	$(call if_changed,ld)
 	@:
 
-$(obj)/piggy.gz: $(obj)/../Image FORCE
-	$(call if_changed,gzip)
+$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
+	$(call if_changed,$(suffix_y))
 
-$(obj)/piggy.o:  $(obj)/piggy.gz FORCE
+$(obj)/piggy.$(suffix_y).o:  $(obj)/piggy.$(suffix_y) FORCE
 
 CFLAGS_font.o := -Dstatic=
 

arch/arm/boot/compressed/misc.c

@@ -18,10 +18,15 @@
 
 unsigned int __machine_arch_type;
 
+#define _LINUX_STRING_H_
+
 #include <linux/compiler.h>	/* for inline */
 #include <linux/types.h>	/* for size_t */
 #include <linux/stddef.h>	/* for NULL */
 #include <asm/string.h>
+#include <linux/linkage.h>
+
+#include <asm/unaligned.h>
 
 #ifdef STANDALONE_DEBUG
 #define putstr printf
@@ -188,34 +193,8 @@ static inline __ptr_t memcpy(__ptr_t __dest, __const __ptr_t __src,
 /*
  * gzip delarations
  */
-#define OF(args)  args
 #define STATIC static
 
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;		/* input buffer */
-static uch window[WSIZE];	/* Sliding window buffer */
-
-static unsigned insize;		/* valid bytes in inbuf */
-static unsigned inptr;		/* index of next byte to be processed in inbuf */
-static unsigned outcnt;		/* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
 /* Diagnostic functions */
 #ifdef DEBUG
 #  define Assert(cond,msg) {if(!(cond)) error(msg);}
@@ -233,24 +212,20 @@ static unsigned outcnt;		/* bytes in output buffer */
 #  define Tracecv(c,x)
 #endif
 
-static int  fill_inbuf(void);
-static void flush_window(void);
 static void error(char *m);
 
 extern char input_data[];
 extern char input_data_end[];
 
-static uch *output_data;
-static ulg output_ptr;
-static ulg bytes_out;
+static unsigned char *output_data;
+static unsigned long output_ptr;
 
 static void error(char *m);
 
 static void putstr(const char *);
 
-extern int end;
-static ulg free_mem_ptr;
-static ulg free_mem_end_ptr;
+static unsigned long free_mem_ptr;
+static unsigned long free_mem_end_ptr;
 
 #ifdef STANDALONE_DEBUG
 #define NO_INFLATE_MALLOC
@@ -258,46 +233,13 @@ static ulg free_mem_end_ptr;
 
 #define ARCH_HAS_DECOMP_WDOG
 
-#include "../../../../lib/inflate.c"
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-int fill_inbuf(void)
-{
-	if (insize != 0)
-		error("ran out of input data");
-
-	inbuf = input_data;
-	insize = &input_data_end[0] - &input_data[0];
-
-	inptr = 1;
-	return inbuf[0];
-}
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
 
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-void flush_window(void)
-{
-	ulg c = crc;
-	unsigned n;
-	uch *in, *out, ch;
-
-	in = window;
-	out = &output_data[output_ptr];
-	for (n = 0; n < outcnt; n++) {
-		ch = *out++ = *in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg)outcnt;
-	output_ptr += (ulg)outcnt;
-	outcnt = 0;
-	putstr(".");
-}
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
 
 #ifndef arch_error
 #define arch_error(x)
@@ -314,22 +256,33 @@ static void error(char *x)
 	while(1);	/* Halt */
 }
 
+asmlinkage void __div0(void)
+{
+	error("Attempting division by 0!");
+}
+
 #ifndef STANDALONE_DEBUG
 
-ulg
-decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
-		  int arch_id)
+unsigned long
+decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
+		unsigned long free_mem_ptr_end_p,
+		int arch_id)
 {
-	output_data		= (uch *)output_start;	/* Points to kernel start */
+	unsigned char *tmp;
+
+	output_data		= (unsigned char *)output_start;
 	free_mem_ptr		= free_mem_ptr_p;
 	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
 	arch_decomp_setup();
 
-	makecrc();
+	tmp = (unsigned char *) (((unsigned long)input_data_end) - 4);
+	output_ptr = get_unaligned_le32(tmp);
+
 	putstr("Uncompressing Linux...");
-	gunzip();
+	decompress(input_data, input_data_end - input_data,
+			NULL, NULL, output_data, NULL, error);
 	putstr(" done, booting the kernel.\n");
 	return output_ptr;
 }
@@ -341,11 +294,10 @@ int main()
 {
 	output_data = output_buffer;
 
-	makecrc();
 	putstr("Uncompressing Linux...");
-	gunzip();
+	decompress(input_data, input_data_end - input_data,
+			NULL, NULL, output_data, NULL, error);
 	putstr("done.\n");
 	return 0;
 }
 #endif
-	

arch/arm/boot/compressed/piggy.gzip.S

@@ -0,0 +1,6 @@
+	.section .piggydata,#alloc
+	.globl	input_data
+input_data:
+	.incbin	"arch/arm/boot/compressed/piggy.gzip"
+	.globl	input_data_end
+input_data_end:

arch/arm/boot/compressed/piggy.S → arch/arm/boot/compressed/piggy.lzo.S

@@ -1,6 +1,6 @@
 	.section .piggydata,#alloc
 	.globl	input_data
 input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.gz"
+	.incbin	"arch/arm/boot/compressed/piggy.lzo"
 	.globl	input_data_end
 input_data_end:

arch/arm/configs/mini2440_defconfig

@@ -184,7 +184,7 @@ CONFIG_S3C24XX_PWM=y
 CONFIG_S3C24XX_GPIO_EXTRA=0
 CONFIG_S3C2410_DMA=y
 # CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_S3C24XX_ADC=y
+CONFIG_S3C_ADC=y
 CONFIG_PLAT_S3C=y
 CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
 CONFIG_CPU_LLSERIAL_S3C2440=y
@@ -199,8 +199,8 @@ CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 #
 # Power management
 #
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
+# CONFIG_SAMSUNG_PM_DEBUG is not set
+# CONFIG_SAMSUNG_PM_CHECK is not set
 CONFIG_S3C_LOWLEVEL_UART_PORT=0
 CONFIG_S3C_GPIO_SPACE=0
 

arch/arm/configs/s3c2410_defconfig

@@ -187,7 +187,7 @@ CONFIG_S3C24XX_GPIO_EXTRA128=y
 CONFIG_PM_SIMTEC=y
 CONFIG_S3C2410_DMA=y
 # CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_S3C24XX_ADC=y
+CONFIG_S3C_ADC=y
 CONFIG_MACH_SMDK=y
 CONFIG_PLAT_S3C=y
 CONFIG_CPU_LLSERIAL_S3C2410=y
@@ -203,8 +203,8 @@ CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
 #
 # Power management
 #
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
+# CONFIG_SAMSUNG_PM_DEBUG is not set
+# CONFIG_SAMSUNG_PM_CHECK is not set
 CONFIG_S3C_LOWLEVEL_UART_PORT=0
 CONFIG_S3C_GPIO_SPACE=0
 CONFIG_S3C_DEV_HSMMC=y

arch/arm/configs/s5p6440_defconfig

@@ -0,0 +1,969 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc2
+# Sat Jan  9 16:33:55 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_NO_IOPORT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+CONFIG_ARCH_S5P6440=y
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+CONFIG_PLAT_SAMSUNG=y
+CONFIG_SAMSUNG_CLKSRC=y
+CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
+CONFIG_SAMSUNG_IRQ_UART=y
+CONFIG_SAMSUNG_GPIO_EXTRA=0
+CONFIG_PLAT_S3C=y
+
+#
+# Boot options
+#
+CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
+
+#
+# Power management
+#
+CONFIG_S3C_LOWLEVEL_UART_PORT=1
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_GPIO_TRACK=y
+CONFIG_PLAT_S5P=y
+CONFIG_CPU_S5P6440_INIT=y
+CONFIG_CPU_S5P6440_CLOCK=y
+CONFIG_CPU_S5P6440=y
+CONFIG_MACH_SMDK6440=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+CONFIG_ARM_VIC=y
+CONFIG_ARM_VIC_NR=2
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=200
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=999999
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_CONSOLE is not set
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
+# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_S5P6440=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
+CONFIG_DEBUG_S3C_UART=1
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y

arch/arm/configs/u300_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sat Oct 17 23:32:24 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Jan  6 00:01:36 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -46,6 +46,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -119,14 +120,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -155,6 +183,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -177,6 +206,7 @@ CONFIG_ARCH_U300=y
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 
 #
 # ST-Ericsson AB U300/U330/U335/U365 Platform
@@ -265,12 +295,10 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
@@ -499,14 +527,21 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -517,6 +552,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -539,6 +575,7 @@ CONFIG_HAVE_IDE=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -645,7 +682,6 @@ CONFIG_I2C_STU300=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -661,6 +697,8 @@ CONFIG_SPI_MASTER=y
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PL022=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -708,6 +746,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -716,6 +755,8 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_AB3100_CORE=y
 CONFIG_AB3100_OTP=y
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
@@ -723,6 +764,7 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
 # CONFIG_REGULATOR_LP3971 is not set
 CONFIG_REGULATOR_AB3100=y
 # CONFIG_REGULATOR_TPS65023 is not set
@@ -840,7 +882,9 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
 # LED Triggers
@@ -882,6 +926,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -911,7 +956,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 CONFIG_RTC_DRV_AB3100=y
 
@@ -926,6 +973,15 @@ CONFIG_DMADEVICES=y
 #
 # DMA Devices
 #
+CONFIG_COH901318=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -1018,7 +1074,7 @@ CONFIG_MISC_FILESYSTEMS=y
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1135,6 +1191,7 @@ CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -1142,7 +1199,11 @@ CONFIG_ARM_UNWIND=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 # CONFIG_BINARY_PRINTF is not set
 

arch/arm/include/asm/cpu.h

@@ -11,6 +11,7 @@
 #define __ASM_ARM_CPU_H
 
 #include <linux/percpu.h>
+#include <linux/cpu.h>
 
 struct cpuinfo_arm {
 	struct cpu	cpu;

arch/arm/include/asm/dma.h

@@ -138,12 +138,12 @@ extern int  get_dma_residue(unsigned int chan);
 #define NO_DMA	255
 #endif
 
+#endif /* CONFIG_ISA_DMA_API */
+
 #ifdef CONFIG_PCI
 extern int isa_dma_bridge_buggy;
 #else
 #define isa_dma_bridge_buggy    (0)
 #endif
 
-#endif /* CONFIG_ISA_DMA_API */
-
 #endif /* __ASM_ARM_DMA_H */

arch/arm/include/asm/entry-macro-vic2.S

@@ -0,0 +1,57 @@
+/* arch/arm/include/asm/entry-macro-vic2.S
+ *
+ * Originally arch/arm/mach-s3c6400/include/mach/entry-macro.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Low-level IRQ helper macros for a device with two VICs
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/* This should be included from <mach/entry-macro.S> with the necessary
+ * defines for virtual addresses and IRQ bases for the two vics.
+ *
+ * The code needs the following defined:
+ *	IRQ_VIC0_BASE	IRQ number of VIC0's first IRQ
+ *	IRQ_VIC1_BASE	IRQ number of VIC1's first IRQ
+ *	VA_VIC0		Virtual address of VIC0
+ *	VA_VIC1		Virtual address of VIC1
+ *
+ * Note, code assumes VIC0's virtual address is an ARM immediate constant
+ * away from VIC1.
+*/
+
+#include <asm/hardware/vic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	ldr	\base, =VA_VIC0
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+	@ check the vic0
+	mov	\irqnr, #IRQ_VIC0_BASE + 31
+	ldr	\irqstat, [ \base, # VIC_IRQ_STATUS ]
+	teq	\irqstat, #0
+
+	@ otherwise try vic1
+	addeq	\tmp, \base, #(VA_VIC1 - VA_VIC0)
+	addeq	\irqnr, \irqnr, #(IRQ_VIC1_BASE - IRQ_VIC0_BASE)
+	ldreq	\irqstat, [ \tmp, # VIC_IRQ_STATUS ]
+	teqeq	\irqstat, #0
+
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm

arch/arm/include/asm/ptrace.h

@@ -97,9 +97,15 @@
  * stack during a system call.  Note that sizeof(struct pt_regs)
  * has to be a multiple of 8.
  */
+#ifndef __KERNEL__
 struct pt_regs {
 	long uregs[18];
 };
+#else /* __KERNEL__ */
+struct pt_regs {
+	unsigned long uregs[18];
+};
+#endif /* __KERNEL__ */
 
 #define ARM_cpsr	uregs[16]
 #define ARM_pc		uregs[15]

arch/arm/include/asm/unistd.h

@@ -391,6 +391,7 @@
 #define __NR_pwritev			(__NR_SYSCALL_BASE+362)
 #define __NR_rt_tgsigqueueinfo		(__NR_SYSCALL_BASE+363)
 #define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
+#define __NR_recvmmsg			(__NR_SYSCALL_BASE+365)
 
 /*
  * The following SWIs are ARM private.

arch/arm/kernel/entry-armv.S

@@ -957,9 +957,7 @@ kuser_cmpxchg_fixup:
 
 #else
 
-#ifdef CONFIG_SMP
-	mcr	p15, 0, r0, c7, c10, 5	@ dmb
-#endif
+	smp_dmb
 1:	ldrex	r3, [r2]
 	subs	r3, r3, r0
 	strexeq	r3, r1, [r2]

arch/arm/kernel/process.c

@@ -212,7 +212,8 @@ void __show_regs(struct pt_regs *regs)
 	char buf[64];
 
 	printk("CPU: %d    %s  (%s %.*s)\n",
-		smp_processor_id(), print_tainted(), init_utsname()->release,
+		raw_smp_processor_id(), print_tainted(),
+		init_utsname()->release,
 		(int)strcspn(init_utsname()->version, " "),
 		init_utsname()->version);
 	print_symbol("PC is at %s\n", instruction_pointer(regs));

arch/arm/mach-davinci/board-dm355-evm.c

@@ -236,6 +236,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = {
 
 static struct vpfe_config vpfe_cfg = {
 	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.i2c_adapter_id = 1,
 	.sub_devs = vpfe_sub_devs,
 	.card_name = "DM355 EVM",
 	.ccdc = "DM355 CCDC",

arch/arm/mach-davinci/board-dm365-evm.c

@@ -192,7 +192,11 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
-#ifdef CONFIG_KEYBOARD_DAVINCI
+static int dm365evm_keyscan_enable(struct device *dev)
+{
+	return davinci_cfg_reg(DM365_KEYSCAN);
+}
+
 static unsigned short dm365evm_keymap[] = {
 	KEY_KP2,
 	KEY_LEFT,
@@ -214,6 +218,7 @@ static unsigned short dm365evm_keymap[] = {
 };
 
 static struct davinci_ks_platform_data dm365evm_ks_data = {
+	.device_enable	= dm365evm_keyscan_enable,
 	.keymap		= dm365evm_keymap,
 	.keymapsize	= ARRAY_SIZE(dm365evm_keymap),
 	.rep		= 1,
@@ -222,7 +227,6 @@ static struct davinci_ks_platform_data dm365evm_ks_data = {
 	.interval	= 0x2,
 	.matrix_type	= DAVINCI_KEYSCAN_MATRIX_4X4,
 };
-#endif
 
 static int cpld_mmc_get_cd(int module)
 {
@@ -511,10 +515,7 @@ static __init void dm365_evm_init(void)
 
 	dm365_init_asp(&dm365_evm_snd_data);
 	dm365_init_rtc();
-
-#ifdef CONFIG_KEYBOARD_DAVINCI
 	dm365_init_ks(&dm365evm_ks_data);
-#endif
 }
 
 static __init void dm365_evm_irq_init(void)

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -247,6 +247,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = {
 
 static struct vpfe_config vpfe_cfg = {
 	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.i2c_adapter_id = 1,
 	.sub_devs = vpfe_sub_devs,
 	.card_name = "DM6446 EVM",
 	.ccdc = "DM6446 CCDC",

arch/arm/mach-davinci/cp_intc.c

@@ -81,12 +81,23 @@ static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type)
 	return 0;
 }
 
+/*
+ * Faking this allows us to to work with suspend functions of
+ * generic drivers which call {enable|disable}_irq_wake for
+ * wake up interrupt sources (eg RTC on DA850).
+ */
+static int cp_intc_set_wake(unsigned int irq, unsigned int on)
+{
+	return 0;
+}
+
 static struct irq_chip cp_intc_irq_chip = {
 	.name		= "cp_intc",
 	.ack		= cp_intc_ack_irq,
 	.mask		= cp_intc_mask_irq,
 	.unmask		= cp_intc_unmask_irq,
 	.set_type	= cp_intc_set_irq_type,
+	.set_wake	= cp_intc_set_wake,
 };
 
 void __init cp_intc_init(void __iomem *base, unsigned short num_irq,

arch/arm/mach-davinci/devices-da8xx.c

@@ -481,11 +481,18 @@ static struct platform_device da8xx_rtc_device = {
 
 int da8xx_register_rtc(void)
 {
+	int ret;
+
 	/* Unlock the rtc's registers */
 	__raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c));
 	__raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70));
 
-	return platform_device_register(&da8xx_rtc_device);
+	ret = platform_device_register(&da8xx_rtc_device);
+	if (!ret)
+		/* Atleast on DA850, RTC is a wakeup source */
+		device_init_wakeup(&da8xx_rtc_device.dev, true);
+
+	return ret;
 }
 
 static struct resource da8xx_cpuidle_resources[] = {

arch/arm/mach-davinci/dm365.c

@@ -993,7 +993,6 @@ void __init dm365_init_asp(struct snd_platform_data *pdata)
 
 void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
 {
-	davinci_cfg_reg(DM365_KEYSCAN);
 	dm365_ks_device.dev.platform_data = pdata;
 	platform_device_register(&dm365_ks_device);
 }

arch/arm/mach-lh7a40x/clocks.c

@@ -10,6 +10,8 @@
 #include <mach/hardware.h>
 #include <mach/clocks.h>
 #include <linux/err.h>
+#include <linux/device.h>
+#include <linux/string.h>
 
 struct module;
 

arch/arm/mach-mx2/mxt_td60.c

@@ -58,21 +58,6 @@ static unsigned int mxt_td60_pins[] __initdata = {
 	PE9_PF_UART3_RXD,
 	PE10_PF_UART3_CTS,
 	PE11_PF_UART3_RTS,
-	/* UART3 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-	/* UART4 */
-	PB18_AF_UART5_TXD,
-	PB19_AF_UART5_RXD,
-	PB20_AF_UART5_CTS,
-	PB21_AF_UART5_RTS,
-	/* UART5 */
-	PB10_AF_UART6_TXD,
-	PB12_AF_UART6_CTS,
-	PB11_AF_UART6_RXD,
-	PB13_AF_UART6_RTS,
 	/* FEC */
 	PD0_AIN_FEC_TXD0,
 	PD1_AIN_FEC_TXD1,
@@ -261,12 +246,6 @@ static struct imxuart_platform_data uart_pdata[] = {
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
 		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
 
@@ -278,9 +257,6 @@ static void __init mxt_td60_board_init(void)
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
-	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
-	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
 	mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
 
 	i2c_register_board_info(0, mxt_td60_i2c_devices,

arch/arm/mach-mx25/clock.c

@@ -173,6 +173,7 @@ DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL);
 DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
 DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
 DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL);
+DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR0, 23, get_rate_ipg, NULL);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -204,6 +205,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 };
 
 int __init mx25_clocks_init(unsigned long fref)

arch/arm/mach-mx25/devices.c

@@ -419,3 +419,22 @@ int __init mxc_register_gpios(void)
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
 
+static struct resource mx25_fec_resources[] = {
+	{
+		.start	= MX25_FEC_BASE_ADDR,
+		.end	= MX25_FEC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_FEC,
+		.end	= MX25_INT_FEC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx25_fec_device = {
+	.name	= "fec",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(mx25_fec_resources),
+	.resource	= mx25_fec_resources,
+};

arch/arm/mach-mx25/devices.h

@@ -17,3 +17,4 @@ extern struct platform_device mxc_keypad_device;
 extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
+extern struct platform_device mx25_fec_device;

arch/arm/mach-mx25/mx25pdk.c

@@ -18,10 +18,11 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/smsc911x.h>
+#include <linux/fec.h>
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
@@ -35,16 +36,57 @@
 #include <mach/mx25.h>
 #include <mach/mxc_nand.h>
 #include "devices.h"
-#include <mach/iomux-v3.h>
+#include <mach/iomux.h>
 
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static struct pad_desc mx25pdk_pads[] = {
+	MX25_PAD_FEC_MDC__FEC_MDC,
+	MX25_PAD_FEC_MDIO__FEC_MDIO,
+	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
+	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+};
+
+static struct fec_platform_data mx25_fec_pdata = {
+        .phy    = PHY_INTERFACE_MODE_RMII,
+};
+
+#define FEC_ENABLE_GPIO		35
+#define FEC_RESET_B_GPIO	104
+
+static void __init mx25pdk_fec_reset(void)
+{
+	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
+	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
+
+	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
+	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
+	udelay(2);
+
+	/* turn on PHY power and lift reset */
+	gpio_set_value(FEC_ENABLE_GPIO, 1);
+	gpio_set_value(FEC_RESET_B_GPIO, 1);
+}
+
 static void __init mx25pdk_init(void)
 {
+	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
+			ARRAY_SIZE(mx25pdk_pads));
+
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
+
+	mx25pdk_fec_reset();
+	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
 }
 
 static void __init mx25pdk_timer_init(void)

arch/arm/mach-mx3/Kconfig

@@ -49,6 +49,7 @@ config MACH_PCM037_EET
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -63,7 +64,7 @@ config MACH_MX31_3DS
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
-	select MXC_ULPI
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.

arch/arm/mach-mx3/mm.c

@@ -65,6 +65,11 @@ static struct map_desc mxc_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
 		.length		= AIPS2_SIZE,
 		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual = SPBA0_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+		.length = SPBA0_SIZE,
+		.type = MT_DEVICE_NONSHARED
 	},
 };
 

arch/arm/mach-mx3/mx31ads.c

@@ -494,11 +494,6 @@ static void mxc_init_i2c(void)
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
-		.virtual	= SPBA0_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length		= SPBA0_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
 		.virtual	= CS4_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
 		.length		= CS4_SIZE / 2,

arch/arm/mach-mx3/mx31lite.c

@@ -135,6 +135,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = {
  * USB
  */
 
+#if defined(CONFIG_USB_ULPI)
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -180,6 +181,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
+#endif
 
 /*
  * NOR flash
@@ -212,11 +214,6 @@ static struct platform_device physmap_flash_device = {
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
 	{
-		.virtual = SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length = SPBA0_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}, {
 		.virtual = CS4_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
 		.length = CS4_SIZE,
@@ -261,11 +258,13 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
 	spi_register_board_info(&mc13783_spi_dev, 1);
 
+#if defined(CONFIG_USB_ULPI)
 	/* USB */
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
 
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
 
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");

arch/arm/mach-mx3/mx31moboard-devboard.c

@@ -179,7 +179,7 @@ static int __init devboard_usbh1_init(void)
 
 	usbh1_pdata.otg = otg;
 
-	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
 /*

arch/arm/mach-mx3/mx31moboard-marxbot.c

@@ -294,7 +294,7 @@ static int __init marxbot_usbh1_init(void)
 
 	usbh1_pdata.otg = otg;
 
-	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
 /*

arch/arm/mach-mx3/mx31moboard.c

@@ -346,6 +346,8 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+#if defined(CONFIG_USB_ULPI)
+
 #define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
 
 static int moboard_usbh2_hw_init(struct platform_device *pdev)
@@ -392,8 +394,11 @@ static int __init moboard_usbh2_init(void)
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
 
-	return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
+	return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
 }
+#else
+static inline int moboard_usbh2_init(void) { return 0; }
+#endif
 
 
 static struct gpio_led mx31moboard_leds[] = {

arch/arm/mach-mx3/mx31pdk.c

@@ -211,11 +211,6 @@ static int __init mx31pdk_init_expio(void)
  */
 static struct map_desc mx31pdk_io_desc[] __initdata = {
 	{
-		.virtual = SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length = SPBA0_SIZE,
-		.type = MT_DEVICE_NONSHARED,
-	}, {
 		.virtual = CS5_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(CS5_BASE_ADDR),
 		.length = CS5_SIZE,

arch/arm/mach-mx3/pcm037.c

@@ -322,16 +322,25 @@ static int pcm037_camera_power(struct device *dev, int on)
 	return 0;
 }
 
-static struct i2c_board_info pcm037_i2c_2_devices[] = {
+static struct i2c_board_info pcm037_i2c_camera[] = {
 	{
 		I2C_BOARD_INFO("mt9t031", 0x5d),
+	}, {
+		I2C_BOARD_INFO("mt9v022", 0x48),
 	},
 };
 
-static struct soc_camera_link iclink = {
+static struct soc_camera_link iclink_mt9v022 = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.board_info	= &pcm037_i2c_camera[1],
+	.i2c_adapter_id	= 2,
+	.module_name	= "mt9v022",
+};
+
+static struct soc_camera_link iclink_mt9t031 = {
 	.bus_id		= 0,		/* Must match with the camera ID */
 	.power		= pcm037_camera_power,
-	.board_info	= &pcm037_i2c_2_devices[0],
+	.board_info	= &pcm037_i2c_camera[0],
 	.i2c_adapter_id	= 2,
 	.module_name	= "mt9t031",
 };
@@ -345,11 +354,19 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 	}
 };
 
-static struct platform_device pcm037_camera = {
+static struct platform_device pcm037_mt9t031 = {
 	.name	= "soc-camera-pdrv",
 	.id	= 0,
 	.dev	= {
-		.platform_data = &iclink,
+		.platform_data = &iclink_mt9t031,
+	},
+};
+
+static struct platform_device pcm037_mt9v022 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &iclink_mt9v022,
 	},
 };
 
@@ -449,7 +466,8 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size)
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
-	&pcm037_camera,
+	&pcm037_mt9t031,
+	&pcm037_mt9v022,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -599,7 +617,7 @@ static void __init mxc_board_init(void)
 	if (!ret)
 		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
 	else
-		iclink.power = NULL;
+		iclink_mt9t031.power = NULL;
 
 	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
 		mxc_register_device(&mx3_camera, &camera_pdata);

arch/arm/mach-omap1/clock_data.c

@@ -599,7 +599,7 @@ static struct clk i2c_ick = {
 static struct omap_clk omap_clks[] = {
 	/* non-ULPD clocks */
 	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
-	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	/* CK_GEN1 clocks */
 	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk, CK_16XX),
 	CLK(NULL,	"ck_sossi",	&sossi_ck,	CK_16XX),
@@ -627,7 +627,7 @@ static struct omap_clk omap_clks[] = {
 	CLK(NULL,	"tc2_ck",	&tc2_ck,	CK_16XX),
 	CLK(NULL,	"dma_ck",	&dma_ck,	CK_16XX | CK_1510 | CK_310),
 	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
-	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	CLK(NULL,	"lb_ck",	&lb_ck.clk,	CK_1510 | CK_310),
 	CLK(NULL,	"rhea1_ck",	&rhea1_ck,	CK_16XX),
 	CLK(NULL,	"rhea2_ck",	&rhea2_ck,	CK_16XX),
@@ -658,6 +658,10 @@ static struct omap_clk omap_clks[] = {
 	CLK("i2c_omap.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
 	CLK("i2c_omap.1", "ick",	&i2c_ick,	CK_16XX),
 	CLK("i2c_omap.1", "ick",	&dummy_ck,	CK_1510 | CK_310 | CK_7XX),
+	CLK("omap1_spi100k.1", "fck",	&dummy_ck,	CK_7XX),
+	CLK("omap1_spi100k.1", "ick",	&dummy_ck,	CK_7XX),
+	CLK("omap1_spi100k.2", "fck",	&dummy_ck,	CK_7XX),
+	CLK("omap1_spi100k.2", "ick",	&dummy_ck,	CK_7XX),
 	CLK("omap_uwire", "fck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
 	CLK("omap-mcbsp.1", "ick",	&dspper_ck,	CK_16XX),
 	CLK("omap-mcbsp.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
@@ -674,7 +678,7 @@ static struct omap_clk omap_clks[] = {
  * init
  */
 
-static struct clk_functions omap1_clk_functions __initdata = {
+static struct clk_functions omap1_clk_functions = {
 	.clk_enable		= omap1_clk_enable,
 	.clk_disable		= omap1_clk_disable,
 	.clk_round_rate		= omap1_clk_round_rate,

arch/arm/mach-omap1/devices.c

@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
 
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
@@ -23,6 +24,7 @@
 #include <plat/mux.h>
 #include <mach/gpio.h>
 #include <plat/mmc.h>
+#include <plat/omap7xx.h>
 
 /*-------------------------------------------------------------------------*/
 
@@ -196,6 +198,38 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 
 /*-------------------------------------------------------------------------*/
 
+/* OMAP7xx SPI support */
+#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
+
+struct platform_device omap_spi1 = {
+	.name           = "omap1_spi100k",
+	.id             = 1,
+};
+
+struct platform_device omap_spi2 = {
+	.name           = "omap1_spi100k",
+	.id             = 2,
+};
+
+static void omap_init_spi100k(void)
+{
+	omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
+	if (omap_spi1.dev.platform_data)
+		platform_device_register(&omap_spi1);
+
+	omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
+	if (omap_spi2.dev.platform_data)
+		platform_device_register(&omap_spi2);
+}
+
+#else
+static inline void omap_init_spi100k(void)
+{
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
 #if defined(CONFIG_OMAP_STI)
 
 #define OMAP1_STI_BASE		0xfffea000
@@ -263,6 +297,7 @@ static int __init omap1_init_devices(void)
 
 	omap_init_mbox();
 	omap_init_rtc();
+	omap_init_spi100k();
 	omap_init_sti();
 
 	return 0;

arch/arm/mach-omap1/mux.c

@@ -62,6 +62,14 @@ MUX_CFG_7XX("MMC_7XX_DAT0",        2,   17,    0,   16,   1, 0)
 /* I2C interface */
 MUX_CFG_7XX("I2C_7XX_SCL",         5,    1,    0,    0,   1, 0)
 MUX_CFG_7XX("I2C_7XX_SDA",         5,    5,    0,    0,   1, 0)
+
+/* SPI pins */
+MUX_CFG_7XX("SPI_7XX_1",           6,    5,    4,    4,   1, 0)
+MUX_CFG_7XX("SPI_7XX_2",           6,    9,    4,    8,   1, 0)
+MUX_CFG_7XX("SPI_7XX_3",           6,   13,    4,   12,   1, 0)
+MUX_CFG_7XX("SPI_7XX_4",           6,   17,    4,   16,   1, 0)
+MUX_CFG_7XX("SPI_7XX_5",           8,   25,    0,   24,   0, 0)
+MUX_CFG_7XX("SPI_7XX_6",           9,    5,    0,    4,   0, 0)
 };
 #define OMAP7XX_PINS_SZ		ARRAY_SIZE(omap7xx_pins)
 #else

arch/arm/mach-omap2/Kconfig

@@ -80,6 +80,7 @@ config MACH_OVERO
 config MACH_OMAP3EVM
 	bool "OMAP 3530 EVM board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -63,21 +63,21 @@ static int board_keymap[] = {
 	KEY(5, 1, KEY_H),
 	KEY(5, 2, KEY_J),
 	KEY(5, 3, KEY_F3),
+	KEY(5, 4, KEY_UNKNOWN),
 	KEY(5, 5, KEY_VOLUMEDOWN),
 	KEY(5, 6, KEY_M),
-	KEY(5, 7, KEY_ENTER),
+	KEY(5, 7, KEY_RIGHT),
 	KEY(6, 0, KEY_Q),
 	KEY(6, 1, KEY_A),
 	KEY(6, 2, KEY_N),
 	KEY(6, 3, KEY_BACKSPACE),
 	KEY(6, 6, KEY_P),
-	KEY(6, 7, KEY_SELECT),
+	KEY(6, 7, KEY_UP),
 	KEY(7, 0, KEY_PROG1),	/*MACRO 1 <User defined> */
 	KEY(7, 1, KEY_PROG2),	/*MACRO 2 <User defined> */
 	KEY(7, 2, KEY_PROG3),	/*MACRO 3 <User defined> */
 	KEY(7, 3, KEY_PROG4),	/*MACRO 4 <User defined> */
-	KEY(7, 5, KEY_RIGHT),
-	KEY(7, 6, KEY_UP),
+	KEY(7, 6, KEY_SELECT),
 	KEY(7, 7, KEY_DOWN)
 };
 

arch/arm/mach-omap2/clock2xxx.c

@@ -449,40 +449,78 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
 #ifdef CONFIG_CPU_FREQ
 /*
  * Walk PRCM rate table and fillout cpufreq freq_table
+ * XXX This should be replaced by an OPP layer in the near future
  */
-static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)];
+static struct cpufreq_frequency_table *freq_table;
 
 void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
 {
-	struct prcm_config *prcm;
+	const struct prcm_config *prcm;
+	long sys_ck_rate;
 	int i = 0;
+	int tbl_sz = 0;
+
+	sys_ck_rate = clk_get_rate(sclk);
 
 	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
 		if (!(prcm->flags & cpu_mask))
 			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
+		if (prcm->xtal_speed != sys_ck_rate)
 			continue;
 
 		/* don't put bypass rates in table */
 		if (prcm->dpll_speed == prcm->xtal_speed)
 			continue;
 
-		freq_table[i].index = i;
-		freq_table[i].frequency = prcm->mpu_speed / 1000;
-		i++;
+		tbl_sz++;
 	}
 
-	if (i == 0) {
-		printk(KERN_WARNING "%s: failed to initialize frequency "
-		       "table\n", __func__);
+	/*
+	 * XXX Ensure that we're doing what CPUFreq expects for this error
+	 * case and the following one
+	 */
+	if (tbl_sz == 0) {
+		pr_warning("%s: no matching entries in rate_table\n",
+			   __func__);
+		return;
+	}
+
+	/* Include the CPUFREQ_TABLE_END terminator entry */
+	tbl_sz++;
+
+	freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
+			     GFP_ATOMIC);
+	if (!freq_table) {
+		pr_err("%s: could not kzalloc frequency table\n", __func__);
 		return;
 	}
 
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck_rate)
+			continue;
+
+		/* don't put bypass rates in table */
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			continue;
+
+		freq_table[i].index = i;
+		freq_table[i].frequency = prcm->mpu_speed / 1000;
+		i++;
+	}
+
 	freq_table[i].index = i;
 	freq_table[i].frequency = CPUFREQ_TABLE_END;
 
 	*table = &freq_table[0];
 }
+
+void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	kfree(freq_table);
+}
+
 #endif
 
 struct clk_functions omap2_clk_functions = {
@@ -494,6 +532,7 @@ struct clk_functions omap2_clk_functions = {
 	.clk_disable_unused	= omap2_clk_disable_unused,
 #ifdef	CONFIG_CPU_FREQ
 	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
+	.clk_exit_cpufreq_table	= omap2_clk_exit_cpufreq_table,
 #endif
 };
 

arch/arm/mach-omap2/clock34xx.c

@@ -34,7 +34,6 @@
 #include <asm/div64.h>
 #include <asm/clkdev.h>
 
-#include <plat/sdrc.h>
 #include "clock.h"
 #include "clock34xx.h"
 #include "sdrc.h"

arch/arm/mach-omap2/clock34xx_data.c

@@ -776,6 +776,8 @@ static struct clk dpll4_m5_ck = {
 	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
 	.clksel		= div16_dpll4_clksel,
 	.clkdm_name	= "dpll4_clkdm",
+	.set_rate	= &omap2_clksel_set_rate,
+	.round_rate	= &omap2_clksel_round_rate,
 	.recalc		= &omap2_clksel_recalc,
 };
 
@@ -1500,6 +1502,7 @@ static struct clk uart2_fck = {
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -1509,6 +1512,7 @@ static struct clk uart1_fck = {
 	.parent		= &core_48m_fck,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
 	.recalc		= &followparent_recalc,
 };
 
@@ -2745,7 +2749,7 @@ static struct clk mcbsp4_ick = {
 };
 
 static const struct clksel mcbsp_234_clksel[] = {
-	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+	{ .parent = &per_96m_fck,  .rates = common_mcbsp_96m_rates },
 	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
 	{ .parent = NULL }
 };

arch/arm/mach-omap2/clockdomain.c

@@ -559,7 +559,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 	 * downstream clocks for debugging purposes?
 	 */
 
-	if (!clkdm || !clk)
+	if (!clkdm || !clk || !clkdm->clktrctrl_mask)
 		return -EINVAL;
 
 	if (atomic_inc_return(&clkdm->usecount) > 1)
@@ -610,7 +610,7 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 	 * downstream clocks for debugging purposes?
 	 */
 
-	if (!clkdm || !clk)
+	if (!clkdm || !clk || !clkdm->clktrctrl_mask)
 		return -EINVAL;
 
 #ifdef DEBUG

arch/arm/mach-omap2/io.c

@@ -33,7 +33,6 @@
 #include <plat/sdrc.h>
 #include <plat/gpmc.h>
 #include <plat/serial.h>
-#include <plat/mux.h>
 #include <plat/vram.h>
 
 #include "clock.h"
@@ -73,21 +72,21 @@ static struct map_desc omap24xx_io_desc[] __initdata = {
 #ifdef CONFIG_ARCH_OMAP2420
 static struct map_desc omap242x_io_desc[] __initdata = {
 	{
-		.virtual	= DSP_MEM_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_MEM_24XX_PHYS),
-		.length		= DSP_MEM_24XX_SIZE,
+		.virtual	= DSP_MEM_2420_VIRT,
+		.pfn		= __phys_to_pfn(DSP_MEM_2420_PHYS),
+		.length		= DSP_MEM_2420_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= DSP_IPI_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_IPI_24XX_PHYS),
-		.length		= DSP_IPI_24XX_SIZE,
+		.virtual	= DSP_IPI_2420_VIRT,
+		.pfn		= __phys_to_pfn(DSP_IPI_2420_PHYS),
+		.length		= DSP_IPI_2420_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= DSP_MMU_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_MMU_24XX_PHYS),
-		.length		= DSP_MMU_24XX_SIZE,
+		.virtual	= DSP_MMU_2420_VIRT,
+		.pfn		= __phys_to_pfn(DSP_MMU_2420_PHYS),
+		.length		= DSP_MMU_2420_SIZE,
 		.type		= MT_DEVICE
 	},
 };

arch/arm/mach-omap2/mux.c

@@ -994,8 +994,10 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
 	}
 
 #ifdef CONFIG_OMAP_MUX
-	omap_mux_package_fixup(package_subset, superset);
-	omap_mux_package_init_balls(package_balls, superset);
+	if (package_subset)
+		omap_mux_package_fixup(package_subset, superset);
+	if (package_balls)
+		omap_mux_package_init_balls(package_balls, superset);
 	omap_mux_set_cmdline_signals();
 	omap_mux_set_board_signals(board_mux);
 #endif

arch/arm/mach-omap2/opp2420_data.c

@@ -9,45 +9,47 @@
  * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
  * These configurations are characterized by voltage and speed for clocks.
  * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
+ * these combinations is via the 'ratios' which the clocks operate with
  * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
+ * setting. All configurations can be described by a DPLL setting and a ratio.
  *
  * XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810)
  *
  * THe format described in this file is deprecated.  Once a reasonable
  * OPP API exists, the data in this file should be converted to use it.
  *
  * This is technically part of the OMAP2xxx clock code.
+ *
+ * Considerable work is still needed to fully support dynamic frequency
+ * changes on OMAP2xxx-series chips.  Readers interested in such a
+ * project are encouraged to review the Maemo Diablo RX-34 and RX-44
+ * kernel source at:
+ *     http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
  */
 
 #include "opp2xxx.h"
 #include "sdrc.h"
 #include "clock.h"
 
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
  * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
  * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
  * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
  *
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
+ * Filling in table based on H4 boards available.  There are quite a
+ * few more rate combinations which could be defined.
  *
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used.	Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set.	 The exception is the bypass setting which is
- * availble for low power bypass.
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used.  Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set.  The exception is the bypass
+ * setting which is available for low power bypass.
  *
  * Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
+ **/
 const struct prcm_config omap2420_rate_table[] = {
 	/* PRCM I - FAST */
 	{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */

arch/arm/mach-omap2/opp2430_data.c

@@ -1,5 +1,5 @@
 /*
- * opp2420_data.c - old-style "OPP" table for OMAP2420
+ * opp2430_data.c - old-style "OPP" table for OMAP2430
  *
  * Copyright (C) 2005-2009 Texas Instruments, Inc.
  * Copyright (C) 2004-2009 Nokia Corporation
@@ -9,16 +9,16 @@
  * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
  * These configurations are characterized by voltage and speed for clocks.
  * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
+ * these combinations is via the 'ratios' which the clocks operate with
  * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ * setting. All configurations can be described by a DPLL setting and a ratio.
  *
  * 2430 differs from 2420 in that there are no more phase synchronizers used.
  * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
  * 2430 (iva2.1, NOdsp, mdm)
  *
  * XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets.
  *
  * THe format described in this file is deprecated.  Once a reasonable
  * OPP API exists, the data in this file should be converted to use it.
@@ -30,24 +30,24 @@
 #include "sdrc.h"
 #include "clock.h"
 
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
  * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
  * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
  * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
  *
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
+ * Filling in table based on 2430-SDPs variants available.  There are
+ * quite a few more rate combinations which could be defined.
  *
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used.	Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set.	 The exception is the bypass setting which is
- * availble for low power bypass.
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used.  Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set.  The exception is the bypass
+ * setting which is available for low power bypass.
  *
  * Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
+ */
 const struct prcm_config omap2430_rate_table[] = {
 	/* PRCM #4 - ratio2 (ES2.1) - FAST */
 	{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL,		/* 399MHz ARM */

arch/arm/mach-omap2/pm34xx.c

@@ -124,8 +124,8 @@ static void omap3_core_save_context(void)
 	control_padconf_off |= START_PADCONF_SAVE;
 	omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF);
 	/* wait for the save to complete */
-	while (!omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
-			& PADCONF_SAVE_DONE)
+	while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
+			& PADCONF_SAVE_DONE))
 		;
 	/* Save the Interrupt controller context */
 	omap_intc_save_context();

arch/arm/mach-omap2/serial.c

@@ -125,6 +125,13 @@ static struct plat_serial8250_port serial_platform_data3[] = {
 	}
 };
 #endif
+static inline unsigned int __serial_read_reg(struct uart_port *up,
+					   int offset)
+{
+	offset <<= up->regshift;
+	return (unsigned int)__raw_readb(up->membase + offset);
+}
+
 static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
 					   int offset)
 {
@@ -583,11 +590,12 @@ static unsigned int serial_in_override(struct uart_port *up, int offset)
 {
 	if (UART_RX == offset) {
 		unsigned int lsr;
-		lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR);
+		lsr = __serial_read_reg(up, UART_LSR);
 		if (!(lsr & UART_LSR_DR))
 			return -EPERM;
 	}
-	return serial_read_reg(omap_uart[up->line].p, offset);
+
+	return __serial_read_reg(up, offset);
 }
 
 void __init omap_serial_early_init(void)

arch/arm/mach-pxa/Kconfig

@@ -37,6 +37,8 @@ config MACH_ZYLONITE320
 config MACH_LITTLETON
 	bool "PXA3xx Form Factor Platform (aka Littleton)"
 	select PXA3xx
+	select CPU_PXA300
+	select CPU_PXA310
 	select PXA_SSP
 
 config MACH_TAVOREVB

arch/arm/mach-pxa/include/mach/hardware.h

@@ -250,20 +250,17 @@
 
 #define cpu_is_pxa930()					\
 	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa930(id);			\
+		__cpu_is_pxa930(read_cpuid_id());	\
 	 })
 
 #define cpu_is_pxa935()					\
 	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa935(id);			\
+		__cpu_is_pxa935(read_cpuid_id());	\
 	 })
 
 #define cpu_is_pxa950()					\
 	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa950(id);			\
+		__cpu_is_pxa950(read_cpuid_id());	\
 	 })
 
 

arch/arm/mach-pxa/include/mach/zylonite.h

@@ -8,13 +8,6 @@
 /* the following variables are processor specific and initialized
  * by the corresponding zylonite_pxa3xx_init()
  */
-struct platform_mmc_slot {
-	int gpio_cd;
-	int gpio_wp;
-};
-
-extern struct platform_mmc_slot zylonite_mmc_slot[];
-
 extern int gpio_eth_irq;
 extern int gpio_debug_led1;
 extern int gpio_debug_led2;

arch/arm/mach-pxa/littleton.c

@@ -110,6 +110,12 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 	GPIO7_MMC1_CLK,
 	GPIO8_MMC1_CMD,
 	GPIO15_GPIO, /* card detect */
+
+	/* UART3 */
+	GPIO107_UART3_CTS,
+	GPIO108_UART3_RTS,
+	GPIO109_UART3_TXD,
+	GPIO110_UART3_RXD,
 };
 
 static struct resource smc91x_resources[] = {

arch/arm/mach-pxa/magician.c

@@ -381,7 +381,7 @@ err:
 	return ret;
 }
 
-static int magician_backlight_notify(int brightness)
+static int magician_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
 	if (brightness >= 200) {

arch/arm/mach-pxa/palmld.c

@@ -270,7 +270,7 @@ err:
 	return ret;
 }
 
-static int palmld_backlight_notify(int brightness)
+static int palmld_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
 	gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);

arch/arm/mach-pxa/palmt5.c

@@ -209,7 +209,7 @@ err:
 	return ret;
 }
 
-static int palmt5_backlight_notify(int brightness)
+static int palmt5_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
 	gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);

arch/arm/mach-pxa/palmtc.c

@@ -185,7 +185,7 @@ err:
 	return ret;
 }
 
-static int palmtc_backlight_notify(int brightness)
+static int palmtc_backlight_notify(struct device *dev, int brightness)
 {
 	/* backlight is on when GPIO16 AF0 is high */
 	gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness);

arch/arm/mach-pxa/palmte2.c

@@ -181,7 +181,7 @@ err:
 	return ret;
 }
 
-static int palmte2_backlight_notify(int brightness)
+static int palmte2_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
 	gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);

arch/arm/mach-pxa/palmtreo.c

@@ -375,7 +375,7 @@ err:
 	return ret;
 }
 
-static int treo_backlight_notify(int brightness)
+static int treo_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness);
 	return TREO_MAX_INTENSITY - brightness;

arch/arm/mach-pxa/palmtx.c

@@ -269,7 +269,7 @@ err:
 	return ret;
 }
 
-static int palmtx_backlight_notify(int brightness)
+static int palmtx_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
 	gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);

arch/arm/mach-pxa/palmz72.c

@@ -196,7 +196,7 @@ err:
 	return ret;
 }
 
-static int palmz72_backlight_notify(int brightness)
+static int palmz72_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
 	gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);

arch/arm/mach-pxa/poodle.c

@@ -293,7 +293,7 @@ static struct pxamci_platform_data poodle_mci_platform_data = {
 	.init 			= poodle_mci_init,
 	.setpower 		= poodle_mci_setpower,
 	.exit			= poodle_mci_exit,
-	.gpio_card_detect	= POODLE_IRQ_GPIO_nSD_DETECT,
+	.gpio_card_detect	= POODLE_GPIO_nSD_DETECT,
 	.gpio_card_ro		= POODLE_GPIO_nSD_WP,
 	.gpio_power		= -1,
 };

arch/arm/mach-pxa/spitz.c

@@ -389,13 +389,13 @@ static struct gpio_keys_button spitz_gpio_keys[] = {
 		.type	= EV_SW,
 		.code	= 0,
 		.gpio	= SPITZ_GPIO_SWA,
-		.desc	= "Display Down",
+		.desc	= "Display Down",
 	},
 	{
 		.type	= EV_SW,
 		.code	= 1,
 		.gpio	= SPITZ_GPIO_SWB,
-		.desc	= "Lid Closed",
+		.desc	= "Lid Closed",
 	},
 };
 

arch/arm/mach-pxa/viper.c

@@ -379,7 +379,7 @@ err_request_bckl:
 	return ret;
 }
 
-static int viper_backlight_notify(int brightness)
+static int viper_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
 	gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);

arch/arm/mach-pxa/zeus.c

@@ -25,6 +25,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
+#include <linux/apm-emulation.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -626,8 +627,27 @@ static void zeus_power_off(void)
 	pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
 }
 
-int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
-		      unsigned ngpio, void *context)
+#ifdef CONFIG_APM_EMULATION
+static void zeus_get_power_status(struct apm_power_info *info)
+{
+	/* Power supply is always present */
+	info->ac_line_status	= APM_AC_ONLINE;
+	info->battery_status	= APM_BATTERY_STATUS_NOT_PRESENT;
+	info->battery_flag	= APM_BATTERY_FLAG_NOT_PRESENT;
+}
+
+static inline void zeus_setup_apm(void)
+{
+	apm_get_power_status = zeus_get_power_status;
+}
+#else
+static inline void zeus_setup_apm(void)
+{
+}
+#endif
+
+static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
+			     unsigned ngpio, void *context)
 {
 	int i;
 	u8 pcb_info = 0;
@@ -726,9 +746,18 @@ static mfp_cfg_t zeus_pin_config[] __initdata = {
 	GPIO99_GPIO,		/* CF RDY */
 };
 
+/*
+ * DM9k MSCx settings:	SRAM, 16 bits
+ *			17 cycles delay first access
+ *			 5 cycles delay next access
+ *			13 cycles recovery time
+ *			faster device
+ */
+#define DM9K_MSC_VALUE		0xe4c9
+
 static void __init zeus_init(void)
 {
-	u16 dm9000_msc = 0xe279;
+	u16 dm9000_msc = DM9K_MSC_VALUE;
 
 	system_rev = __raw_readw(ZEUS_CPLD_VERSION);
 	pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
@@ -738,6 +767,7 @@ static void __init zeus_init(void)
 	MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
 
 	pm_power_off = zeus_power_off;
+	zeus_setup_apm();
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
 

arch/arm/mach-pxa/zylonite.c

@@ -36,9 +36,6 @@
 #include "devices.h"
 #include "generic.h"
 
-#define MAX_SLOTS	3
-struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
-
 int gpio_eth_irq;
 int gpio_debug_led1;
 int gpio_debug_led2;
@@ -220,84 +217,28 @@ static inline void zylonite_init_lcd(void) {}
 #endif
 
 #if defined(CONFIG_MMC)
-static int zylonite_mci_ro(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-
-	return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp);
-}
-
-static int zylonite_mci_init(struct device *dev,
-			     irq_handler_t zylonite_detect_int,
-			     void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int err, cd_irq, gpio_cd, gpio_wp;
-
-	cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
-	gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
-	gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
-
-	/*
-	 * setup GPIO for Zylonite MMC controller
-	 */
-	err = gpio_request(gpio_cd, "mmc card detect");
-	if (err)
-		goto err_request_cd;
-	gpio_direction_input(gpio_cd);
-
-	err = gpio_request(gpio_wp, "mmc write protect");
-	if (err)
-		goto err_request_wp;
-	gpio_direction_input(gpio_wp);
-
-	err = request_irq(cd_irq, zylonite_detect_int,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: MMC/SD/SDIO: "
-				"can't request card detect IRQ\n", __func__);
-		goto err_request_irq;
-	}
-
-	return 0;
-
-err_request_irq:
-	gpio_free(gpio_wp);
-err_request_wp:
-	gpio_free(gpio_cd);
-err_request_cd:
-	return err;
-}
-
-static void zylonite_mci_exit(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int cd_irq, gpio_cd, gpio_wp;
-
-	cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
-	gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
-	gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
-
-	free_irq(cd_irq, data);
-	gpio_free(gpio_cd);
-	gpio_free(gpio_wp);
-}
-
 static struct pxamci_platform_data zylonite_mci_platform_data = {
 	.detect_delay	= 20,
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= zylonite_mci_init,
-	.exit		= zylonite_mci_exit,
-	.get_ro		= zylonite_mci_ro,
-	.gpio_card_detect = -1,
-	.gpio_card_ro	= -1,
+	.gpio_card_detect = EXT_GPIO(0),
+	.gpio_card_ro	= EXT_GPIO(2),
 	.gpio_power	= -1,
 };
 
 static struct pxamci_platform_data zylonite_mci2_platform_data = {
 	.detect_delay	= 20,
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect = EXT_GPIO(1),
+	.gpio_card_ro	= EXT_GPIO(3),
+	.gpio_power	= -1,
+};
+
+static struct pxamci_platform_data zylonite_mci3_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect = EXT_GPIO(30),
+	.gpio_card_ro	= EXT_GPIO(31),
+	.gpio_power	= -1,
 };
 
 static void __init zylonite_init_mmc(void)
@@ -305,7 +246,7 @@ static void __init zylonite_init_mmc(void)
 	pxa_set_mci_info(&zylonite_mci_platform_data);
 	pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
 	if (cpu_is_pxa310())
-		pxa3xx_set_mci3_info(&zylonite_mci_platform_data);
+		pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
 }
 #else
 static inline void zylonite_init_mmc(void) {}

arch/arm/mach-pxa/zylonite_pxa300.c

@@ -129,8 +129,8 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO22_I2C_SDA,
 
 	/* GPIO */
-	GPIO18_GPIO,	/* GPIO Expander #0 INT_N */
-	GPIO19_GPIO,	/* GPIO Expander #1 INT_N */
+	GPIO18_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #0 INT_N */
+	GPIO19_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #1 INT_N */
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -258,10 +258,6 @@ void __init zylonite_pxa300_init(void)
 		/* detect LCD panel */
 		zylonite_detect_lcd_panel();
 
-		/* MMC card detect & write protect for controller 0 */
-		zylonite_mmc_slot[0].gpio_cd  = EXT_GPIO(0);
-		zylonite_mmc_slot[0].gpio_wp  = EXT_GPIO(2);
-
 		/* WM9713 IRQ */
 		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
 
@@ -276,10 +272,6 @@ void __init zylonite_pxa300_init(void)
 	if (cpu_is_pxa310()) {
 		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
 		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
-
-		/* MMC card detect & write protect for controller 2 */
-		zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
-		zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
 	}
 
 	/* GPIOs for Debug LEDs */

arch/arm/mach-pxa/zylonite_pxa320.c

@@ -209,10 +209,6 @@ void __init zylonite_pxa320_init(void)
 		gpio_debug_led1	= mfp_to_gpio(MFP_PIN_GPIO1_2);
 		gpio_debug_led2	= mfp_to_gpio(MFP_PIN_GPIO4_2);
 
-		/* MMC card detect & write protect for controller 0 */
-		zylonite_mmc_slot[0].gpio_cd  = mfp_to_gpio(MFP_PIN_GPIO1);
-		zylonite_mmc_slot[0].gpio_wp  = mfp_to_gpio(MFP_PIN_GPIO5);
-
 		/* WM9713 IRQ */
 		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15);
 	}

arch/arm/mach-realview/include/mach/board-pb1176.h

@@ -74,8 +74,8 @@
 #define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
 
 /*
- * Control register SYS_RESETCTL is set to 1 to force a soft reset
+ * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
  */
-#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL    0x0100
+#define REALVIEW_PB1176_SYS_SOFT_RESET    0x0100
 
 #endif	/* __ASM_ARCH_BOARD_PB1176_H */

arch/arm/mach-realview/include/mach/platform.h

@@ -140,7 +140,7 @@
  *     SYS_CLD, SYS_BOOTCS
  */
 #define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK	0xA05F	       /* Enable write access */
+#define REALVIEW_SYS_LOCK_VAL	0xA05F	       /* Enable write access */
 
 /*
  * REALVIEW_SYS_FLASH

arch/arm/mach-realview/realview_eb.c

@@ -381,6 +381,20 @@ static struct sys_timer realview_eb_timer = {
 	.init		= realview_eb_timer_init,
 };
 
+static void realview_eb_reset(char mode)
+{
+	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+	if (core_tile_eb11mp())
+		__raw_writel(0x0008, reset_ctrl);
+}
+
 static void __init realview_eb_init(void)
 {
 	int i;
@@ -408,6 +422,7 @@ static void __init realview_eb_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
+	realview_reset = realview_eb_reset;
 }
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")

arch/arm/mach-realview/realview_pb1176.c

@@ -292,12 +292,10 @@ static struct sys_timer realview_pb1176_timer = {
 
 static void realview_pb1176_reset(char mode)
 {
-	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
-		REALVIEW_SYS_RESETCTL_OFFSET;
-	void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
-		REALVIEW_SYS_LOCK_OFFSET;
-	__raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl);
-	__raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
+	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+	__raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl);
 }
 
 static void realview_pb1176_fixup(struct machine_desc *mdesc,

arch/arm/mach-realview/realview_pb11mp.c

@@ -301,17 +301,16 @@ static struct sys_timer realview_pb11mp_timer = {
 
 static void realview_pb11mp_reset(char mode)
 {
-	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
-		REALVIEW_SYS_RESETCTL_OFFSET;
-	unsigned int val;
+	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
 
 	/*
 	 * To reset, we hit the on-board reset register
 	 * in the system FPGA
 	 */
-	val = __raw_readl(hdr_ctrl);
-	val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR;
-	__raw_writel(val, hdr_ctrl);
+	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+	__raw_writel(0x0000, reset_ctrl);
+	__raw_writel(0x0004, reset_ctrl);
 }
 
 static void __init realview_pb11mp_init(void)

arch/arm/mach-realview/realview_pba8.c

@@ -272,6 +272,20 @@ static struct sys_timer realview_pba8_timer = {
 	.init		= realview_pba8_timer_init,
 };
 
+static void realview_pba8_reset(char mode)
+{
+	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+	__raw_writel(0x0000, reset_ctrl);
+	__raw_writel(0x0004, reset_ctrl);
+}
+
 static void __init realview_pba8_init(void)
 {
 	int i;
@@ -291,6 +305,7 @@ static void __init realview_pba8_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
+	realview_reset = realview_pba8_reset;
 }
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")

arch/arm/mach-realview/realview_pbx.c

@@ -324,6 +324,20 @@ static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags,
 #endif
 }
 
+static void realview_pbx_reset(char mode)
+{
+	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+	__raw_writel(0x0000, reset_ctrl);
+	__raw_writel(0x0004, reset_ctrl);
+}
+
 static void __init realview_pbx_init(void)
 {
 	int i;
@@ -358,6 +372,7 @@ static void __init realview_pbx_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
+	realview_reset = realview_pbx_reset;
 }
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")

arch/arm/mach-s3c2410/include/mach/gpio-core.h → arch/arm/mach-s3c2410/include/mach/gpio-track.h

@@ -15,7 +15,6 @@
 #ifndef __ASM_ARCH_GPIO_CORE_H
 #define __ASM_ARCH_GPIO_CORE_H __FILE__
 
-#include <plat/gpio-core.h>
 #include <mach/regs-gpio.h>
 
 extern struct s3c_gpio_chip s3c24xx_gpios[];

arch/arm/mach-s3c2410/mach-amlm5900.c

@@ -153,7 +153,7 @@ static struct platform_device *amlm5900_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
-	&s3c_device_usb,
+	&s3c_device_ohci,
  	&s3c_device_rtc,
 	&s3c_device_usbgadget,
         &s3c_device_sdi,

arch/arm/mach-s3c2410/mach-bast.c

@@ -584,7 +584,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = {
 // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,

arch/arm/mach-s3c2410/mach-h1940.c

@@ -196,7 +196,7 @@ static struct platform_device h1940_device_bluetooth = {
 	.id               = -1,
 };
 
-static struct s3c24xx_mci_pdata h1940_mmc_cfg = {
+static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
 	.gpio_detect   = S3C2410_GPF(5),
 	.gpio_wprotect = S3C2410_GPH(8),
 	.set_power     = NULL,
@@ -272,7 +272,7 @@ static struct platform_device h1940_lcd_powerdev = {
 
 static struct platform_device *h1940_devices[] __initdata = {
 	&s3c_device_ts,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -311,12 +311,11 @@ static void __init h1940_init(void)
 	u32 tmp;
 
 	s3c24xx_fb_set_platdata(&h1940_fb_info);
+	s3c24xx_mci_set_platdata(&h1940_mmc_cfg);
  	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
 	s3c24xx_ts_set_platdata(&h1940_ts_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
-	s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
-
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 

arch/arm/mach-s3c2410/mach-n30.c

@@ -322,7 +322,7 @@ static struct platform_device *n30_devices[] __initdata = {
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_usbgadget,
 	&n30_button_device,
 	&n30_blue_led,

arch/arm/mach-s3c2410/mach-otom.c

@@ -92,7 +92,7 @@ static struct platform_device otom_device_nor = {
 /* Standard OTOM devices */
 
 static struct platform_device *otom11_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,

arch/arm/mach-s3c2410/mach-qt2410.c

@@ -246,7 +246,7 @@ static struct platform_device qt2410_spi = {
 /* Board devices */
 
 static struct platform_device *qt2410_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,

arch/arm/mach-s3c2410/mach-smdk2410.c

@@ -87,7 +87,7 @@ static struct s3c2410_uartcfg smdk2410_uartcfgs[] __initdata = {
 };
 
 static struct platform_device *smdk2410_devices[] __initdata = {
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,

arch/arm/mach-s3c2410/mach-tct_hammer.c

@@ -129,7 +129,7 @@ static struct platform_device *tct_hammer_devices[] __initdata = {
 	&s3c_device_adc,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
-	&s3c_device_usb,
+	&s3c_device_ohci,
 	&s3c_device_rtc,
 	&s3c_device_usbgadget,
 	&s3c_device_sdi,