Merge branch 'control_mcbsp_fix_2.6.37' of git://git.pwsan.com/linux-2.6 into omap-for-linus

arch/arm/mach-omap2/Kconfig

@@ -100,20 +100,20 @@ config MACH_OMAP2_TUSB6010
 
 config MACH_OMAP_H4
 	bool "OMAP 2420 H4 board"
-	depends on ARCH_OMAP2
+	depends on ARCH_OMAP2420
 	default y
 	select OMAP_PACKAGE_ZAF
 	select OMAP_DEBUG_DEVICES
 
 config MACH_OMAP_APOLLON
 	bool "OMAP 2420 Apollon board"
-	depends on ARCH_OMAP2
+	depends on ARCH_OMAP2420
 	default y
 	select OMAP_PACKAGE_ZAC
 
 config MACH_OMAP_2430SDP
 	bool "OMAP 2430 SDP board"
-	depends on ARCH_OMAP2
+	depends on ARCH_OMAP2430
 	default y
 	select OMAP_PACKAGE_ZAC
 

arch/arm/mach-omap2/Makefile

@@ -3,7 +3,8 @@
 #
 
 # Common support
-obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \
+	 common.o
 
 omap-2-3-common				= irq.o sdrc.o prm2xxx_3xxx.o
 hwmod-common				= omap_hwmod.o \

arch/arm/mach-omap2/board-3430sdp.c

@@ -39,7 +39,6 @@
 #include <plat/gpmc.h>
 #include <plat/display.h>
 
-#include <plat/control.h>
 #include <plat/gpmc-smc91x.h>
 
 #include "board-flash.h"
@@ -47,6 +46,7 @@
 #include "sdram-qimonda-hyb18m512160af-6.h"
 #include "hsmmc.h"
 #include "pm.h"
+#include "control.h"
 
 #define CONFIG_DISABLE_HFCLK 1
 

arch/arm/mach-omap2/board-4430sdp.c

@@ -32,12 +32,12 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/control.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
 
 #include "hsmmc.h"
 #include "timer-gp.h"
+#include "control.h"
 
 #define ETH_KS8851_IRQ			34
 #define ETH_KS8851_POWER_ON		48

arch/arm/mach-omap2/board-am3517evm.c

@@ -32,11 +32,11 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/control.h>
 #include <plat/usb.h>
 #include <plat/display.h>
 
 #include "mux.h"
+#include "control.h"
 
 #define AM35XX_EVM_PHY_MASK		(0xF)
 #define AM35XX_EVM_MDIO_FREQUENCY	(1000000)

arch/arm/mach-omap2/board-apollon.c

@@ -39,9 +39,9 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
-#include <plat/control.h>
 
 #include "mux.h"
+#include "control.h"
 
 /* LED & Switch macros */
 #define LED0_GPIO13		13

arch/arm/mach-omap2/board-cm-t3517.c

@@ -40,7 +40,6 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/control.h>
 #include <plat/usb.h>
 #include <plat/nand.h>
 #include <plat/gpmc.h>
@@ -48,6 +47,7 @@
 #include <mach/am35xx.h>
 
 #include "mux.h"
+#include "control.h"
 
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led cm_t3517_leds[] = {

arch/arm/mach-omap2/board-generic.c

@@ -48,10 +48,22 @@ static void __init omap_generic_init(void)
 
 static void __init omap_generic_map_io(void)
 {
-	omap2_set_globals_242x(); /* should be 242x, 243x, or 343x */
-	omap242x_map_common_io();
+	if (cpu_is_omap242x()) {
+		omap2_set_globals_242x();
+		omap242x_map_common_io();
+	} else if (cpu_is_omap243x()) {
+		omap2_set_globals_243x();
+		omap243x_map_common_io();
+	} else if (cpu_is_omap34xx()) {
+		omap2_set_globals_3xxx();
+		omap34xx_map_common_io();
+	} else if (cpu_is_omap44xx()) {
+		omap2_set_globals_443x();
+		omap44xx_map_common_io();
+	}
 }
 
+/* XXX This machine entry name should be updated */
 MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
 	.phys_io	= 0x48000000,

arch/arm/mach-omap2/board-h4.c

@@ -31,7 +31,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/control.h>
 #include <mach/gpio.h>
 #include <plat/usb.h>
 #include <plat/board.h>
@@ -42,6 +41,7 @@
 #include <plat/gpmc.h>
 
 #include "mux.h"
+#include "control.h"
 
 #define H4_FLASH_CS	0
 #define H4_SMC91X_CS	1

arch/arm/mach-omap2/board-ldp.c

@@ -42,12 +42,12 @@
 #include <mach/board-zoom.h>
 
 #include <asm/delay.h>
-#include <plat/control.h>
 #include <plat/usb.h>
 
 #include "board-flash.h"
 #include "mux.h"
 #include "hsmmc.h"
+#include "control.h"
 
 #define LDP_SMSC911X_CS		1
 #define LDP_SMSC911X_GPIO	152

arch/arm/mach-omap2/board-omap3logic.c

@@ -36,6 +36,7 @@
 #include "mux.h"
 #include "hsmmc.h"
 #include "timer-gp.h"
+#include "control.h"
 
 #include <plat/mux.h>
 #include <plat/board.h>
@@ -43,7 +44,6 @@
 #include <plat/gpmc-smsc911x.h>
 #include <plat/gpmc.h>
 #include <plat/sdrc.h>
-#include <plat/control.h>
 
 #define OMAP3LOGIC_SMSC911X_CS			1
 

arch/arm/mach-omap2/board-omap4panda.c

@@ -34,12 +34,12 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/control.h>
 #include <plat/usb.h>
 #include <plat/mmc.h>
-#include "hsmmc.h"
 #include "timer-gp.h"
 
+#include "hsmmc.h"
+#include "control.h"
 
 #define GPIO_HUB_POWER		1
 #define GPIO_HUB_NRESET		62

arch/arm/mach-omap2/clock.c

@@ -395,7 +395,7 @@ void omap2_clk_disable_unused(struct clk *clk)
 	if ((regval32 & (1 << clk->enable_bit)) == v)
 		return;
 
-	printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
+	pr_debug("Disabling unused clock \"%s\"\n", clk->name);
 	if (cpu_is_omap34xx()) {
 		omap2_clk_enable(clk);
 		omap2_clk_disable(clk);

arch/arm/mach-omap2/clock2420_data.c

@@ -27,6 +27,7 @@
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
+#include "control.h"
 
 #define OMAP_CM_REGADDR                 OMAP2420_CM_REGADDR
 
@@ -89,6 +90,12 @@ static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
 	.clkdm_name	= "wkup_clkdm",
 };
 
+/* Optional external clock input for McBSP CLKS */
+static struct clk mcbsp_clks = {
+	.name		= "mcbsp_clks",
+	.ops		= &clkops_null,
+};
+
 /*
  * Analog domain root source clocks
  */
@@ -1135,14 +1142,34 @@ static struct clk mcbsp1_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static const struct clksel_rate common_mcbsp_96m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel mcbsp_fck_clksel[] = {
+	{ .parent = &func_96m_ck,  .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
 static struct clk mcbsp1_fck = {
 	.name		= "mcbsp1_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
+	.init		= &omap2_init_clksel_parent,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
-	.recalc		= &followparent_recalc,
+	.clksel_reg	= OMAP242X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
+	.clksel		= mcbsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcbsp2_ick = {
@@ -1159,10 +1186,14 @@ static struct clk mcbsp2_fck = {
 	.name		= "mcbsp2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
+	.init		= &omap2_init_clksel_parent,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
-	.recalc		= &followparent_recalc,
+	.clksel_reg	= OMAP242X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
+	.clksel		= mcbsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcspi1_ick = {
@@ -1721,6 +1752,9 @@ static struct omap_clk omap2420_clks[] = {
 	CLK(NULL,	"osc_ck",	&osc_ck,	CK_242X),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_242X),
 	CLK(NULL,	"alt_ck",	&alt_ck,	CK_242X),
+	CLK("omap-mcbsp.1",	"pad_fck",	&mcbsp_clks,	CK_242X),
+	CLK("omap-mcbsp.2",	"pad_fck",	&mcbsp_clks,	CK_242X),
+	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_242X),
 	/* internal analog sources */
 	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_242X),
 	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_242X),
@@ -1728,6 +1762,8 @@ static struct omap_clk omap2420_clks[] = {
 	/* internal prcm root sources */
 	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_242X),
 	CLK(NULL,	"core_ck",	&core_ck,	CK_242X),
+	CLK("omap-mcbsp.1",	"prcm_fck",	&func_96m_ck,	CK_242X),
+	CLK("omap-mcbsp.2",	"prcm_fck",	&func_96m_ck,	CK_242X),
 	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_242X),
 	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_242X),
 	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_242X),

arch/arm/mach-omap2/clock2430_data.c

@@ -27,6 +27,7 @@
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
+#include "control.h"
 
 #define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
 
@@ -89,6 +90,12 @@ static struct clk alt_ck = {		/* Typical 54M or 48M, may not exist */
 	.clkdm_name	= "wkup_clkdm",
 };
 
+/* Optional external clock input for McBSP CLKS */
+static struct clk mcbsp_clks = {
+	.name		= "mcbsp_clks",
+	.ops		= &clkops_null,
+};
+
 /*
  * Analog domain root source clocks
  */
@@ -1123,14 +1130,34 @@ static struct clk mcbsp1_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static const struct clksel_rate common_mcbsp_96m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX },
+	{ .div = 0 }
+};
+
+static const struct clksel mcbsp_fck_clksel[] = {
+	{ .parent = &func_96m_ck,  .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
 static struct clk mcbsp1_fck = {
 	.name		= "mcbsp1_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
+	.init		= &omap2_init_clksel_parent,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP1_SHIFT,
-	.recalc		= &followparent_recalc,
+	.clksel_reg	= OMAP243X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
+	.clksel		= mcbsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcbsp2_ick = {
@@ -1147,10 +1174,14 @@ static struct clk mcbsp2_fck = {
 	.name		= "mcbsp2_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
+	.init		= &omap2_init_clksel_parent,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
 	.enable_bit	= OMAP24XX_EN_MCBSP2_SHIFT,
-	.recalc		= &followparent_recalc,
+	.clksel_reg	= OMAP243X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
+	.clksel		= mcbsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcbsp3_ick = {
@@ -1167,10 +1198,14 @@ static struct clk mcbsp3_fck = {
 	.name		= "mcbsp3_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
+	.init		= &omap2_init_clksel_parent,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP3_SHIFT,
-	.recalc		= &followparent_recalc,
+	.clksel_reg	= OMAP243X_CTRL_REGADDR(OMAP243X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
+	.clksel		= mcbsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcbsp4_ick = {
@@ -1187,10 +1222,14 @@ static struct clk mcbsp4_fck = {
 	.name		= "mcbsp4_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
+	.init		= &omap2_init_clksel_parent,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP4_SHIFT,
-	.recalc		= &followparent_recalc,
+	.clksel_reg	= OMAP243X_CTRL_REGADDR(OMAP243X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
+	.clksel		= mcbsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcbsp5_ick = {
@@ -1207,10 +1246,14 @@ static struct clk mcbsp5_fck = {
 	.name		= "mcbsp5_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &func_96m_ck,
+	.init		= &omap2_init_clksel_parent,
 	.clkdm_name	= "core_l4_clkdm",
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP24XX_CM_FCLKEN2),
 	.enable_bit	= OMAP2430_EN_MCBSP5_SHIFT,
-	.recalc		= &followparent_recalc,
+	.clksel_reg	= OMAP243X_CTRL_REGADDR(OMAP243X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
+	.clksel		= mcbsp_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
 };
 
 static struct clk mcspi1_ick = {
@@ -1808,6 +1851,12 @@ static struct omap_clk omap2430_clks[] = {
 	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X),
 	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X),
+	CLK("omap-mcbsp.1",	"pad_fck",	&mcbsp_clks,	CK_243X),
+	CLK("omap-mcbsp.2",	"pad_fck",	&mcbsp_clks,	CK_243X),
+	CLK("omap-mcbsp.3",	"pad_fck",	&mcbsp_clks,	CK_243X),
+	CLK("omap-mcbsp.4",	"pad_fck",	&mcbsp_clks,	CK_243X),
+	CLK("omap-mcbsp.5",	"pad_fck",	&mcbsp_clks,	CK_243X),
+	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_243X),
 	/* internal analog sources */
 	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_243X),
 	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_243X),
@@ -1815,6 +1864,11 @@ static struct omap_clk omap2430_clks[] = {
 	/* internal prcm root sources */
 	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_243X),
 	CLK(NULL,	"core_ck",	&core_ck,	CK_243X),
+	CLK("omap-mcbsp.1",	"prcm_fck",	&func_96m_ck,	CK_243X),
+	CLK("omap-mcbsp.2",	"prcm_fck",	&func_96m_ck,	CK_243X),
+	CLK("omap-mcbsp.3",	"prcm_fck",	&func_96m_ck,	CK_243X),
+	CLK("omap-mcbsp.4",	"prcm_fck",	&func_96m_ck,	CK_243X),
+	CLK("omap-mcbsp.5",	"prcm_fck",	&func_96m_ck,	CK_243X),
 	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_243X),
 	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_243X),
 	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_243X),

arch/arm/mach-omap2/clock3xxx_data.c

@@ -20,7 +20,6 @@
 #include <linux/clk.h>
 #include <linux/list.h>
 
-#include <plat/control.h>
 #include <plat/clkdev_omap.h>
 
 #include "clock.h"
@@ -33,6 +32,7 @@
 #include "cm-regbits-34xx.h"
 #include "prm.h"
 #include "prm-regbits-34xx.h"
+#include "control.h"
 
 /*
  * clocks
@@ -3208,6 +3208,11 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_3XXX),
 	CLK(NULL,	"sys_ck",	&sys_ck,	CK_3XXX),
 	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_3XXX),
+	CLK("omap-mcbsp.1",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
+	CLK("omap-mcbsp.2",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
+	CLK("omap-mcbsp.3",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
+	CLK("omap-mcbsp.4",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
+	CLK("omap-mcbsp.5",	"pad_fck",	&mcbsp_clks,	CK_3XXX),
 	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_3XXX),
 	CLK(NULL,	"sys_clkout1",	&sys_clkout1,	CK_3XXX),
 	CLK(NULL,	"dpll1_ck",	&dpll1_ck,	CK_3XXX),
@@ -3273,6 +3278,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2 | CK_AM35XX),
 	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2 | CK_AM35XX),
 	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2 | CK_AM35XX),
+	CLK("omap-mcbsp.1",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
+	CLK("omap-mcbsp.5",	"prcm_fck",	&core_96m_fck,	CK_3XXX),
 	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_3XXX),
 	CLK("mmci-omap-hs.2",	"fck",	&mmchs3_fck,	CK_3430ES2 | CK_AM35XX),
 	CLK("mmci-omap-hs.1",	"fck",	&mmchs2_fck,	CK_3XXX),
@@ -3366,6 +3373,9 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_3XXX),
 	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_3XXX),
 	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_3XXX),
+	CLK("omap-mcbsp.2",	"prcm_fck",	&per_96m_fck,	CK_3XXX),
+	CLK("omap-mcbsp.3",	"prcm_fck",	&per_96m_fck,	CK_3XXX),
+	CLK("omap-mcbsp.4",	"prcm_fck",	&per_96m_fck,	CK_3XXX),
 	CLK(NULL,	"per_96m_fck",	&per_96m_fck,	CK_3XXX),
 	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_3XXX),
 	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_3XXX),

arch/arm/mach-omap2/clock44xx_data.c

@@ -26,7 +26,6 @@
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/clk.h>
-#include <plat/control.h>
 #include <plat/clkdev_omap.h>
 
 #include "clock.h"
@@ -35,6 +34,7 @@
 #include "cm-regbits-44xx.h"
 #include "prm.h"
 #include "prm-regbits-44xx.h"
+#include "control.h"
 
 /* Root clocks */
 

arch/arm/mach-omap2/common.c

@@ -0,0 +1,135 @@
+/*
+ * linux/arch/arm/mach-omap2/common.c
+ *
+ * Code common to all OMAP2+ machines.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Copyright (C) 2010 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/mux.h>
+
+#include <plat/clock.h>
+
+#include "sdrc.h"
+#include "control.h"
+
+/* Global address base setup code */
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
+static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
+{
+	omap2_set_globals_tap(omap2_globals);
+	omap2_set_globals_sdrc(omap2_globals);
+	omap2_set_globals_control(omap2_globals);
+	omap2_set_globals_prcm(omap2_globals);
+}
+
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2420)
+
+static struct omap_globals omap242x_globals = {
+	.class	= OMAP242X_CLASS,
+	.tap	= OMAP2_L4_IO_ADDRESS(0x48014000),
+	.sdrc	= OMAP2420_SDRC_BASE,
+	.sms	= OMAP2420_SMS_BASE,
+	.ctrl	= OMAP242X_CTRL_BASE,
+	.prm	= OMAP2420_PRM_BASE,
+	.cm	= OMAP2420_CM_BASE,
+	.uart1_phys	= OMAP2_UART1_BASE,
+	.uart2_phys	= OMAP2_UART2_BASE,
+	.uart3_phys	= OMAP2_UART3_BASE,
+};
+
+void __init omap2_set_globals_242x(void)
+{
+	__omap2_set_globals(&omap242x_globals);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2430)
+
+static struct omap_globals omap243x_globals = {
+	.class	= OMAP243X_CLASS,
+	.tap	= OMAP2_L4_IO_ADDRESS(0x4900a000),
+	.sdrc	= OMAP243X_SDRC_BASE,
+	.sms	= OMAP243X_SMS_BASE,
+	.ctrl	= OMAP243X_CTRL_BASE,
+	.prm	= OMAP2430_PRM_BASE,
+	.cm	= OMAP2430_CM_BASE,
+	.uart1_phys	= OMAP2_UART1_BASE,
+	.uart2_phys	= OMAP2_UART2_BASE,
+	.uart3_phys	= OMAP2_UART3_BASE,
+};
+
+void __init omap2_set_globals_243x(void)
+{
+	__omap2_set_globals(&omap243x_globals);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+
+static struct omap_globals omap3_globals = {
+	.class	= OMAP343X_CLASS,
+	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
+	.sdrc	= OMAP343X_SDRC_BASE,
+	.sms	= OMAP343X_SMS_BASE,
+	.ctrl	= OMAP343X_CTRL_BASE,
+	.prm	= OMAP3430_PRM_BASE,
+	.cm	= OMAP3430_CM_BASE,
+	.uart1_phys	= OMAP3_UART1_BASE,
+	.uart2_phys	= OMAP3_UART2_BASE,
+	.uart3_phys	= OMAP3_UART3_BASE,
+	.uart4_phys	= OMAP3_UART4_BASE,	/* Only on 3630 */
+};
+
+void __init omap2_set_globals_3xxx(void)
+{
+	__omap2_set_globals(&omap3_globals);
+}
+
+void __init omap3_map_io(void)
+{
+	omap2_set_globals_3xxx();
+	omap34xx_map_common_io();
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static struct omap_globals omap4_globals = {
+	.class	= OMAP443X_CLASS,
+	.tap	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
+	.ctrl	= OMAP443X_SCM_BASE,
+	.ctrl_pad	= OMAP443X_CTRL_BASE,
+	.prm	= OMAP4430_PRM_BASE,
+	.cm	= OMAP4430_CM_BASE,
+	.cm2	= OMAP4430_CM2_BASE,
+	.uart1_phys	= OMAP4_UART1_BASE,
+	.uart2_phys	= OMAP4_UART2_BASE,
+	.uart3_phys	= OMAP4_UART3_BASE,
+	.uart4_phys	= OMAP4_UART4_BASE,
+};
+
+void __init omap2_set_globals_443x(void)
+{
+	omap2_set_globals_tap(&omap4_globals);
+	omap2_set_globals_control(&omap4_globals);
+	omap2_set_globals_prcm(&omap4_globals);
+}
+#endif
+

arch/arm/mach-omap2/control.c

@@ -16,14 +16,15 @@
 #include <linux/io.h>
 
 #include <plat/common.h>
-#include <plat/control.h>
 #include <plat/sdrc.h>
+
 #include "cm-regbits-34xx.h"
 #include "prm-regbits-34xx.h"
 #include "cm.h"
 #include "prm.h"
 #include "sdrc.h"
 #include "pm.h"
+#include "control.h"
 
 static void __iomem *omap2_ctrl_base;
 static void __iomem *omap4_ctrl_pad_base;

arch/arm/plat-omap/include/plat/control.h → arch/arm/mach-omap2/control.h

@@ -1,10 +1,10 @@
 /*
- * arch/arm/plat-omap/include/mach/control.h
+ * arch/arm/mach-omap2/control.h
  *
  * OMAP2/3/4 System Control Module definitions
  *
- * Copyright (C) 2007-2009 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008, 2010 Nokia Corporation
  *
  * Written by Paul Walmsley
  *
@@ -13,8 +13,8 @@
  * the Free Software Foundation.
  */
 
-#ifndef __ASM_ARCH_CONTROL_H
-#define __ASM_ARCH_CONTROL_H
+#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
+#define __ARCH_ARM_MACH_OMAP2_CONTROL_H
 
 #include <mach/io.h>
 #include <mach/ctrl_module_core_44xx.h>
@@ -223,6 +223,8 @@
 #define OMAP2_MMCSDIO1ADPCLKISEL	(1 << 24) /* MMC1 loop back clock */
 #define OMAP24XX_USBSTANDBYCTRL		(1 << 15)
 #define OMAP2_MCBSP2_CLKS_MASK		(1 << 6)
+#define OMAP2_MCBSP1_FSR_MASK		(1 << 4)
+#define OMAP2_MCBSP1_CLKR_MASK		(1 << 3)
 #define OMAP2_MCBSP1_CLKS_MASK		(1 << 2)
 
 /* CONTROL_DEVCONF1 bits */
@@ -319,12 +321,12 @@
 #define		FEAT_L2CACHE_256KB	3
 
 #define OMAP3_ISP_SHIFT			5
-#define OMAP3_ISP_MASK			(1<< OMAP3_ISP_SHIFT)
+#define OMAP3_ISP_MASK			(1 << OMAP3_ISP_SHIFT)
 #define		FEAT_ISP		0
 #define		FEAT_ISP_NONE		1
 
 #define OMAP3_NEON_SHIFT		4
-#define OMAP3_NEON_MASK			(1<< OMAP3_NEON_SHIFT)
+#define OMAP3_NEON_MASK			(1 << OMAP3_NEON_SHIFT)
 #define		FEAT_NEON		0
 #define		FEAT_NEON_NONE		1
 
@@ -362,5 +364,5 @@ extern void omap3_control_restore_context(void);
 #endif
 #endif	/* __ASSEMBLY__ */
 
-#endif /* __ASM_ARCH_CONTROL_H */
+#endif /* __ARCH_ARM_MACH_OMAP2_CONTROL_H */
 

arch/arm/mach-omap2/cpuidle34xx.c

@@ -29,10 +29,10 @@
 #include <plat/irqs.h>
 #include <plat/powerdomain.h>
 #include <plat/clockdomain.h>
-#include <plat/control.h>
 #include <plat/serial.h>
 
 #include "pm.h"
+#include "control.h"
 
 #ifdef CONFIG_CPU_IDLE
 

arch/arm/mach-omap2/devices.c

@@ -9,7 +9,6 @@
  * (at your option) any later version.
  */
 
-#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -23,7 +22,6 @@
 #include <asm/mach/map.h>
 #include <asm/pmu.h>
 
-#include <plat/control.h>
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <mach/gpio.h>
@@ -33,6 +31,7 @@
 #include <plat/omap_device.h>
 
 #include "mux.h"
+#include "control.h"
 
 #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
 

arch/arm/mach-omap2/hsmmc.c

@@ -14,11 +14,11 @@
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <mach/hardware.h>
-#include <plat/control.h>
 #include <plat/mmc.h>
 #include <plat/omap-pm.h>
 
 #include "hsmmc.h"
+#include "control.h"
 
 #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 

arch/arm/mach-omap2/id.c

@@ -22,11 +22,12 @@
 #include <asm/cputype.h>
 
 #include <plat/common.h>
-#include <plat/control.h>
 #include <plat/cpu.h>
 
 #include <mach/id.h>
 
+#include "control.h"
+
 static struct omap_chip_id omap_chip;
 static unsigned int omap_revision;
 

arch/arm/mach-omap2/mcbsp.c

@@ -23,6 +23,86 @@
 #include <plat/cpu.h>
 #include <plat/mcbsp.h>
 
+#include "control.h"
+
+
+/* McBSP internal signal muxing functions */
+
+void omap2_mcbsp1_mux_clkr_src(u8 mux)
+{
+	u32 v;
+
+	v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	if (mux == CLKR_SRC_CLKR)
+		v &= ~OMAP2_MCBSP1_CLKR_MASK;
+	else if (mux == CLKR_SRC_CLKX)
+		v |= OMAP2_MCBSP1_CLKR_MASK;
+	omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+}
+EXPORT_SYMBOL(omap2_mcbsp1_mux_clkr_src);
+
+void omap2_mcbsp1_mux_fsr_src(u8 mux)
+{
+	u32 v;
+
+	v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	if (mux == FSR_SRC_FSR)
+		v &= ~OMAP2_MCBSP1_FSR_MASK;
+	else if (mux == FSR_SRC_FSX)
+		v |= OMAP2_MCBSP1_FSR_MASK;
+	omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+}
+EXPORT_SYMBOL(omap2_mcbsp1_mux_fsr_src);
+
+/* McBSP CLKS source switching function */
+
+int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id)
+{
+	struct omap_mcbsp *mcbsp;
+	struct clk *fck_src;
+	char *fck_src_name;
+	int r;
+
+	if (!omap_mcbsp_check_valid_id(id)) {
+		pr_err("%s: Invalid id (%d)\n", __func__, id + 1);
+		return -EINVAL;
+	}
+	mcbsp = id_to_mcbsp_ptr(id);
+
+	if (fck_src_id == MCBSP_CLKS_PAD_SRC)
+		fck_src_name = "pad_fck";
+	else if (fck_src_id == MCBSP_CLKS_PRCM_SRC)
+		fck_src_name = "prcm_fck";
+	else
+		return -EINVAL;
+
+	fck_src = clk_get(mcbsp->dev, fck_src_name);
+	if (IS_ERR_OR_NULL(fck_src)) {
+		pr_err("omap-mcbsp: %s: could not clk_get() %s\n", "clks",
+		       fck_src_name);
+		return -EINVAL;
+	}
+
+	clk_disable(mcbsp->fclk);
+
+	r = clk_set_parent(mcbsp->fclk, fck_src);
+	if (IS_ERR_VALUE(r)) {
+		pr_err("omap-mcbsp: %s: could not clk_set_parent() to %s\n",
+		       "clks", fck_src_name);
+		clk_put(fck_src);
+		return -EINVAL;
+	}
+
+	clk_enable(mcbsp->fclk);
+
+	clk_put(fck_src);
+
+	return 0;
+}
+EXPORT_SYMBOL(omap2_mcbsp_set_clks_src);
+
+
+/* Platform data */
 
 #ifdef CONFIG_ARCH_OMAP2420
 static struct omap_mcbsp_platform_data omap2420_mcbsp_pdata[] = {

arch/arm/mach-omap2/mux.c

@@ -23,12 +23,11 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
  */
-#include <linux/module.h>
+#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
 #include <linux/list.h>
+#include <linux/slab.h>
 #include <linux/ctype.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
@@ -36,8 +35,7 @@
 
 #include <asm/system.h>
 
-#include <plat/control.h>
-
+#include "control.h"
 #include "mux.h"
 
 #define OMAP_MUX_BASE_OFFSET		0x30	/* Offset from CTRL_BASE */

arch/arm/mach-omap2/pm24xx.c

@@ -38,7 +38,6 @@
 #include <mach/irqs.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
-#include <plat/control.h>
 #include <plat/dma.h>
 #include <plat/board.h>
 
@@ -48,6 +47,7 @@
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 #include "pm.h"
+#include "control.h"
 
 #include <plat/powerdomain.h>
 #include <plat/clockdomain.h>

arch/arm/mach-omap2/pm34xx.c

@@ -32,7 +32,6 @@
 #include <plat/sram.h>
 #include <plat/clockdomain.h>
 #include <plat/powerdomain.h>
-#include <plat/control.h>
 #include <plat/serial.h>
 #include <plat/sdrc.h>
 #include <plat/prcm.h>
@@ -48,6 +47,7 @@
 #include "prm.h"
 #include "pm.h"
 #include "sdrc.h"
+#include "control.h"
 
 /* Scratchpad offsets */
 #define OMAP343X_TABLE_ADDRESS_OFFSET	   0x31

arch/arm/mach-omap2/prcm.c

@@ -26,7 +26,6 @@
 #include <plat/common.h>
 #include <plat/prcm.h>
 #include <plat/irqs.h>
-#include <plat/control.h>
 
 #include "clock.h"
 #include "clock2xxx.h"
@@ -34,6 +33,7 @@
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 #include "prm-regbits-44xx.h"
+#include "control.h"
 
 static void __iomem *prm_base;
 static void __iomem *cm_base;

arch/arm/mach-omap2/serial.c

@@ -35,7 +35,6 @@
 #include <plat/common.h>
 #include <plat/board.h>
 #include <plat/clock.h>
-#include <plat/control.h>
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
@@ -44,6 +43,7 @@
 #include "pm.h"
 #include "cm.h"
 #include "prm-regbits-34xx.h"
+#include "control.h"
 
 #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV	0x52
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */

arch/arm/mach-omap2/sleep34xx.S

@@ -27,11 +27,11 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <plat/control.h>
 
 #include "cm.h"
 #include "prm.h"
 #include "sdrc.h"
+#include "control.h"
 
 #define SDRC_SCRATCHPAD_SEM_V	0xfa00291c
 

arch/arm/mach-omap2/usb-fs.c

@@ -29,18 +29,18 @@
 
 #include <asm/irq.h>
 
-#include <plat/control.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 
+#include "control.h"
+#include "mux.h"
+
 #define INT_USB_IRQ_GEN		INT_24XX_USB_IRQ_GEN
 #define INT_USB_IRQ_NISO	INT_24XX_USB_IRQ_NISO
 #define INT_USB_IRQ_ISO		INT_24XX_USB_IRQ_ISO
 #define INT_USB_IRQ_HGEN	INT_24XX_USB_IRQ_HGEN
 #define INT_USB_IRQ_OTG		INT_24XX_USB_IRQ_OTG
 
-#include "mux.h"
-
 #if defined(CONFIG_ARCH_OMAP2)
 
 #ifdef	CONFIG_USB_GADGET_OMAP

arch/arm/plat-omap/Makefile

@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := common.o sram.o clock.o devices.o dma.o mux.o gpio.o \
-	 usb.o fb.o io.o
+	 usb.o fb.o io.o counter_32k.o
 obj-m :=
 obj-n :=
 obj-  :=

arch/arm/plat-omap/clock.c

@@ -60,7 +60,7 @@ void clk_disable(struct clk *clk)
 
 	spin_lock_irqsave(&clockfw_lock, flags);
 	if (clk->usecount == 0) {
-		printk(KERN_ERR "Trying disable clock %s with 0 usecount\n",
+		pr_err("Trying disable clock %s with 0 usecount\n",
 		       clk->name);
 		WARN_ON(1);
 		goto out;
@@ -397,6 +397,7 @@ static int __init clk_disable_unused(void)
 	struct clk *ck;
 	unsigned long flags;
 
+	pr_info("clock: disabling unused clocks to save power\n");
 	list_for_each_entry(ck, &clocks, node) {
 		if (ck->ops == &clkops_null)
 			continue;
@@ -418,7 +419,7 @@ late_initcall(clk_disable_unused);
 int __init clk_init(struct clk_functions * custom_clocks)
 {
 	if (!custom_clocks) {
-		printk(KERN_ERR "No custom clock functions registered\n");
+		pr_err("No custom clock functions registered\n");
 		BUG();
 	}
 

arch/arm/plat-omap/common.c

@@ -11,38 +11,15 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/console.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_8250.h>
-#include <linux/serial_reg.h>
-#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/omapfb.h>
 
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-#include <asm/setup.h>
-
 #include <plat/common.h>
 #include <plat/board.h>
-#include <plat/control.h>
-#include <plat/mux.h>
-#include <plat/fpga.h>
-#include <plat/serial.h>
 #include <plat/vram.h>
 
-#include <plat/clock.h>
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-# include "../mach-omap2/sdrc.h"
-#endif
 
 #define NO_LENGTH_CHECK 0xffffffff
 
@@ -88,255 +65,3 @@ void __init omap_reserve(void)
 	omapfb_reserve_sdram_memblock();
 	omap_vram_reserve_sdram_memblock();
 }
-
-/*
- * 32KHz clocksource ... always available, on pretty most chips except
- * OMAP 730 and 1510.  Other timers could be used as clocksources, with
- * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
- * but systems won't necessarily want to spend resources that way.
- */
-
-#define OMAP16XX_TIMER_32K_SYNCHRONIZED		0xfffbc410
-
-#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
-
-#include <linux/clocksource.h>
-
-/*
- * offset_32k holds the init time counter value. It is then subtracted
- * from every counter read to achieve a counter that counts time from the
- * kernel boot (needed for sched_clock()).
- */
-static u32 offset_32k __read_mostly;
-
-#ifdef CONFIG_ARCH_OMAP16XX
-static cycle_t omap16xx_32k_read(struct clocksource *cs)
-{
-	return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k;
-}
-#else
-#define omap16xx_32k_read	NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2420
-static cycle_t omap2420_32k_read(struct clocksource *cs)
-{
-	return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
-}
-#else
-#define omap2420_32k_read	NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP2430
-static cycle_t omap2430_32k_read(struct clocksource *cs)
-{
-	return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;
-}
-#else
-#define omap2430_32k_read	NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP3
-static cycle_t omap34xx_32k_read(struct clocksource *cs)
-{
-	return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k;
-}
-#else
-#define omap34xx_32k_read	NULL
-#endif
-
-#ifdef CONFIG_ARCH_OMAP4
-static cycle_t omap44xx_32k_read(struct clocksource *cs)
-{
-	return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k;
-}
-#else
-#define omap44xx_32k_read	NULL
-#endif
-
-/*
- * Kernel assumes that sched_clock can be called early but may not have
- * things ready yet.
- */
-static cycle_t omap_32k_read_dummy(struct clocksource *cs)
-{
-	return 0;
-}
-
-static struct clocksource clocksource_32k = {
-	.name		= "32k_counter",
-	.rating		= 250,
-	.read		= omap_32k_read_dummy,
-	.mask		= CLOCKSOURCE_MASK(32),
-	.shift		= 10,
-	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
- * Returns current time from boot in nsecs. It's OK for this to wrap
- * around for now, as it's just a relative time stamp.
- */
-unsigned long long sched_clock(void)
-{
-	return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k),
-				  clocksource_32k.mult, clocksource_32k.shift);
-}
-
-/**
- * read_persistent_clock -  Return time from a persistent clock.
- *
- * Reads the time from a source which isn't disabled during PM, the
- * 32k sync timer.  Convert the cycles elapsed since last read into
- * nsecs and adds to a monotonically increasing timespec.
- */
-static struct timespec persistent_ts;
-static cycles_t cycles, last_cycles;
-void read_persistent_clock(struct timespec *ts)
-{
-	unsigned long long nsecs;
-	cycles_t delta;
-	struct timespec *tsp = &persistent_ts;
-
-	last_cycles = cycles;
-	cycles = clocksource_32k.read(&clocksource_32k);
-	delta = cycles - last_cycles;
-
-	nsecs = clocksource_cyc2ns(delta,
-				   clocksource_32k.mult, clocksource_32k.shift);
-
-	timespec_add_ns(tsp, nsecs);
-	*ts = *tsp;
-}
-
-static int __init omap_init_clocksource_32k(void)
-{
-	static char err[] __initdata = KERN_ERR
-			"%s: can't register clocksource!\n";
-
-	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
-		struct clk *sync_32k_ick;
-
-		if (cpu_is_omap16xx())
-			clocksource_32k.read = omap16xx_32k_read;
-		else if (cpu_is_omap2420())
-			clocksource_32k.read = omap2420_32k_read;
-		else if (cpu_is_omap2430())
-			clocksource_32k.read = omap2430_32k_read;
-		else if (cpu_is_omap34xx())
-			clocksource_32k.read = omap34xx_32k_read;
-		else if (cpu_is_omap44xx())
-			clocksource_32k.read = omap44xx_32k_read;
-		else
-			return -ENODEV;
-
-		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
-		if (sync_32k_ick)
-			clk_enable(sync_32k_ick);
-
-		clocksource_32k.mult = clocksource_hz2mult(32768,
-					    clocksource_32k.shift);
-
-		offset_32k = clocksource_32k.read(&clocksource_32k);
-
-		if (clocksource_register(&clocksource_32k))
-			printk(err, clocksource_32k.name);
-	}
-	return 0;
-}
-arch_initcall(omap_init_clocksource_32k);
-
-#endif	/* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
-
-/* Global address base setup code */
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-
-static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
-{
-	omap2_set_globals_tap(omap2_globals);
-	omap2_set_globals_sdrc(omap2_globals);
-	omap2_set_globals_control(omap2_globals);
-	omap2_set_globals_prcm(omap2_globals);
-}
-
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2420)
-
-static struct omap_globals omap242x_globals = {
-	.class	= OMAP242X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(0x48014000),
-	.sdrc	= OMAP2420_SDRC_BASE,
-	.sms	= OMAP2420_SMS_BASE,
-	.ctrl	= OMAP2420_CTRL_BASE,
-	.prm	= OMAP2420_PRM_BASE,
-	.cm	= OMAP2420_CM_BASE,
-};
-
-void __init omap2_set_globals_242x(void)
-{
-	__omap2_set_globals(&omap242x_globals);
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP2430)
-
-static struct omap_globals omap243x_globals = {
-	.class	= OMAP243X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(0x4900a000),
-	.sdrc	= OMAP243X_SDRC_BASE,
-	.sms	= OMAP243X_SMS_BASE,
-	.ctrl	= OMAP243X_CTRL_BASE,
-	.prm	= OMAP2430_PRM_BASE,
-	.cm	= OMAP2430_CM_BASE,
-};
-
-void __init omap2_set_globals_243x(void)
-{
-	__omap2_set_globals(&omap243x_globals);
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP3)
-
-static struct omap_globals omap3_globals = {
-	.class	= OMAP343X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
-	.sdrc	= OMAP343X_SDRC_BASE,
-	.sms	= OMAP343X_SMS_BASE,
-	.ctrl	= OMAP343X_CTRL_BASE,
-	.prm	= OMAP3430_PRM_BASE,
-	.cm	= OMAP3430_CM_BASE,
-};
-
-void __init omap2_set_globals_3xxx(void)
-{
-	__omap2_set_globals(&omap3_globals);
-}
-
-void __init omap3_map_io(void)
-{
-	omap2_set_globals_3xxx();
-	omap34xx_map_common_io();
-}
-#endif
-
-#if defined(CONFIG_ARCH_OMAP4)
-static struct omap_globals omap4_globals = {
-	.class	= OMAP443X_CLASS,
-	.tap	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
-	.ctrl	= OMAP443X_SCM_BASE,
-	.ctrl_pad	= OMAP443X_CTRL_BASE,
-	.prm	= OMAP4430_PRM_BASE,
-	.cm	= OMAP4430_CM_BASE,
-	.cm2	= OMAP4430_CM2_BASE,
-};
-
-void __init omap2_set_globals_443x(void)
-{
-	omap2_set_globals_tap(&omap4_globals);
-	omap2_set_globals_control(&omap4_globals);
-	omap2_set_globals_prcm(&omap4_globals);
-}
-#endif
-

arch/arm/plat-omap/counter_32k.c

@@ -0,0 +1,183 @@
+/*
+ * OMAP 32ksynctimer/counter_32k-related code
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Copyright (C) 2010 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * NOTE: This timer is not the same timer as the old OMAP1 MPU timer.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+#include <plat/board.h>
+
+#include <plat/clock.h>
+
+
+/*
+ * 32KHz clocksource ... always available, on pretty most chips except
+ * OMAP 730 and 1510.  Other timers could be used as clocksources, with
+ * higher resolution in free-running counter modes (e.g. 12 MHz xtal),
+ * but systems won't necessarily want to spend resources that way.
+ */
+
+#define OMAP16XX_TIMER_32K_SYNCHRONIZED		0xfffbc410
+
+#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
+
+#include <linux/clocksource.h>
+
+/*
+ * offset_32k holds the init time counter value. It is then subtracted
+ * from every counter read to achieve a counter that counts time from the
+ * kernel boot (needed for sched_clock()).
+ */
+static u32 offset_32k __read_mostly;
+
+#ifdef CONFIG_ARCH_OMAP16XX
+static cycle_t omap16xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k;
+}
+#else
+#define omap16xx_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2420
+static cycle_t omap2420_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
+}
+#else
+#define omap2420_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+static cycle_t omap2430_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;
+}
+#else
+#define omap2430_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+static cycle_t omap34xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k;
+}
+#else
+#define omap34xx_32k_read	NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static cycle_t omap44xx_32k_read(struct clocksource *cs)
+{
+	return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k;
+}
+#else
+#define omap44xx_32k_read	NULL
+#endif
+
+/*
+ * Kernel assumes that sched_clock can be called early but may not have
+ * things ready yet.
+ */
+static cycle_t omap_32k_read_dummy(struct clocksource *cs)
+{
+	return 0;
+}
+
+static struct clocksource clocksource_32k = {
+	.name		= "32k_counter",
+	.rating		= 250,
+	.read		= omap_32k_read_dummy,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 10,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * Returns current time from boot in nsecs. It's OK for this to wrap
+ * around for now, as it's just a relative time stamp.
+ */
+unsigned long long sched_clock(void)
+{
+	return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k),
+				  clocksource_32k.mult, clocksource_32k.shift);
+}
+
+/**
+ * read_persistent_clock -  Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer.  Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec.
+ */
+static struct timespec persistent_ts;
+static cycles_t cycles, last_cycles;
+void read_persistent_clock(struct timespec *ts)
+{
+	unsigned long long nsecs;
+	cycles_t delta;
+	struct timespec *tsp = &persistent_ts;
+
+	last_cycles = cycles;
+	cycles = clocksource_32k.read(&clocksource_32k);
+	delta = cycles - last_cycles;
+
+	nsecs = clocksource_cyc2ns(delta,
+				   clocksource_32k.mult, clocksource_32k.shift);
+
+	timespec_add_ns(tsp, nsecs);
+	*ts = *tsp;
+}
+
+static int __init omap_init_clocksource_32k(void)
+{
+	static char err[] __initdata = KERN_ERR
+			"%s: can't register clocksource!\n";
+
+	if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
+		struct clk *sync_32k_ick;
+
+		if (cpu_is_omap16xx())
+			clocksource_32k.read = omap16xx_32k_read;
+		else if (cpu_is_omap2420())
+			clocksource_32k.read = omap2420_32k_read;
+		else if (cpu_is_omap2430())
+			clocksource_32k.read = omap2430_32k_read;
+		else if (cpu_is_omap34xx())
+			clocksource_32k.read = omap34xx_32k_read;
+		else if (cpu_is_omap44xx())
+			clocksource_32k.read = omap44xx_32k_read;
+		else
+			return -ENODEV;
+
+		sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
+		if (sync_32k_ick)
+			clk_enable(sync_32k_ick);
+
+		clocksource_32k.mult = clocksource_hz2mult(32768,
+					    clocksource_32k.shift);
+
+		offset_32k = clocksource_32k.read(&clocksource_32k);
+
+		if (clocksource_register(&clocksource_32k))
+			printk(err, clocksource_32k.name);
+	}
+	return 0;
+}
+arch_initcall(omap_init_clocksource_32k);
+
+#endif	/* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
+

arch/arm/plat-omap/devices.c

@@ -21,7 +21,6 @@
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <plat/control.h>
 #include <plat/board.h>
 #include <plat/mmc.h>
 #include <mach/gpio.h>

arch/arm/plat-omap/include/plat/mcbsp.h

@@ -312,6 +312,18 @@
 #define RFSREN			0x0002
 #define RSYNCERREN		0x0001
 
+/* CLKR signal muxing options */
+#define CLKR_SRC_CLKR		0
+#define CLKR_SRC_CLKX		1
+
+/* FSR signal muxing options */
+#define FSR_SRC_FSR		0
+#define FSR_SRC_FSX		1
+
+/* McBSP functional clock sources */
+#define MCBSP_CLKS_PRCM_SRC	0
+#define MCBSP_CLKS_PAD_SRC	1
+
 /* we don't do multichannel for now */
 struct omap_mcbsp_reg_cfg {
 	u16 spcr2;
@@ -398,6 +410,7 @@ struct omap_mcbsp_spi_cfg {
 struct omap_mcbsp_ops {
 	void (*request)(unsigned int);
 	void (*free)(unsigned int);
+	int (*set_clks_src)(u8, u8);
 };
 
 struct omap_mcbsp_platform_data {
@@ -464,6 +477,9 @@ struct omap_mcbsp {
 extern struct omap_mcbsp **mcbsp_ptr;
 extern int omap_mcbsp_count, omap_mcbsp_cache_size;
 
+#define omap_mcbsp_check_valid_id(id)	(id < omap_mcbsp_count)
+#define id_to_mcbsp_ptr(id)		mcbsp_ptr[id];
+
 int omap_mcbsp_init(void);
 void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
 					int size);
@@ -502,6 +518,8 @@ int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
 int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
 
 
+/* McBSP functional clock source changing function */
+extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id);
 /* SPI specific API */
 void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
 
@@ -510,6 +528,10 @@ int omap_mcbsp_pollread(unsigned int id, u16 * buf);
 int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
 int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type);
 
+/* McBSP signal muxing API */
+void omap2_mcbsp1_mux_clkr_src(u8 mux);
+void omap2_mcbsp1_mux_fsr_src(u8 mux);
+
 #ifdef CONFIG_ARCH_OMAP3
 /* Sidetone specific API */
 int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);

arch/arm/plat-omap/include/plat/omap-serial.h

@@ -20,7 +20,6 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
-#include <plat/control.h>
 #include <plat/mux.h>
 
 #define DRIVER_NAME	"omap-hsuart"

arch/arm/plat-omap/include/plat/omap24xx.h

@@ -40,7 +40,7 @@
 #define OMAP24XX_IC_BASE	(L4_24XX_BASE + 0xfe000)
 #define OMAP24XX_IVA_INTC_BASE	0x40000000
 
-#define OMAP2420_CTRL_BASE	L4_24XX_BASE
+#define OMAP242X_CTRL_BASE	L4_24XX_BASE
 #define OMAP2420_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
 #define OMAP2420_PRCM_BASE	(L4_24XX_BASE + 0x8000)
 #define OMAP2420_CM_BASE	(L4_24XX_BASE + 0x8000)

arch/arm/plat-omap/mcbsp.c

@@ -80,9 +80,6 @@ static int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg)
 #define MCBSP_READ_CACHE(mcbsp, reg) \
 		omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 1)
 
-#define omap_mcbsp_check_valid_id(id)	(id < omap_mcbsp_count)
-#define id_to_mcbsp_ptr(id)		mcbsp_ptr[id];
-
 #define MCBSP_ST_READ(mcbsp, reg) \
 			omap_mcbsp_st_read(mcbsp, OMAP_ST_REG_##reg)
 #define MCBSP_ST_WRITE(mcbsp, reg, val) \

arch/arm/plat-omap/sram.c

@@ -31,10 +31,8 @@
 #include <plat/cpu.h>
 #include <plat/vram.h>
 
-#include <plat/control.h>
 #include "sram.h"
 #include "fb.h"
-
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/prm.h"
 # include "../mach-omap2/cm.h"
@@ -71,7 +69,6 @@
 #define OMAP34XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68012858)
 #define OMAP34XX_VA_ADDR_MATCH2		OMAP2_L3_IO_ADDRESS(0x68012880)
 #define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_L3_IO_ADDRESS(0x6C000048)
-#define OMAP34XX_VA_CONTROL_STAT	OMAP2_L4_IO_ADDRESS(0x480022F0)
 
 #define GP_DEVICE		0x300
 

drivers/usb/gadget/omap_udc.c

@@ -54,7 +54,6 @@
 
 #include <plat/dma.h>
 #include <plat/usb.h>
-#include <plat/control.h>
 
 #include "omap_udc.h"
 
@@ -2309,21 +2308,12 @@ static char *trx_mode(unsigned m, int enabled)
 static int proc_otg_show(struct seq_file *s)
 {
 	u32		tmp;
-	u32		trans;
-	char		*ctrl_name;
+	u32		trans = 0;
+	char		*ctrl_name = "(UNKNOWN)";
 
+	/* XXX This needs major revision for OMAP2+ */
 	tmp = omap_readl(OTG_REV);
-	if (cpu_is_omap24xx()) {
-		/*
-		 * REVISIT: Not clear how this works on OMAP2.  trans
-		 * is ANDed to produce bits 7 and 8, which might make
-		 * sense for USB_TRANSCEIVER_CTRL on OMAP1,
-		 * but with CONTROL_DEVCONF, these bits have something to
-		 * do with the frame adjustment counter and McBSP2.
-		 */
-		ctrl_name = "control_devconf";
-		trans = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-	} else {
+	if (cpu_class_is_omap1()) {
 		ctrl_name = "tranceiver_ctrl";
 		trans = omap_readw(USB_TRANSCEIVER_CTRL);
 	}

sound/soc/omap/omap-mcbsp.c

@@ -31,7 +31,6 @@
 #include <sound/initval.h>
 #include <sound/soc.h>
 
-#include <plat/control.h>
 #include <plat/dma.h>
 #include <plat/mcbsp.h>
 #include "omap-mcbsp.h"
@@ -608,93 +607,6 @@ static int omap_mcbsp_dai_set_clkdiv(struct snd_soc_dai *cpu_dai,
 	return 0;
 }
 
-static int omap_mcbsp_dai_set_clks_src(struct omap_mcbsp_data *mcbsp_data,
-				       int clk_id)
-{
-	int sel_bit;
-	u16 reg, reg_devconf1 = OMAP243X_CONTROL_DEVCONF1;
-
-	if (cpu_class_is_omap1()) {
-		/* OMAP1's can use only external source clock */
-		if (unlikely(clk_id == OMAP_MCBSP_SYSCLK_CLKS_FCLK))
-			return -EINVAL;
-		else
-			return 0;
-	}
-
-	if (cpu_is_omap2420() && mcbsp_data->bus_id > 1)
-		return -EINVAL;
-
-	if (cpu_is_omap343x())
-		reg_devconf1 = OMAP343X_CONTROL_DEVCONF1;
-
-	switch (mcbsp_data->bus_id) {
-	case 0:
-		reg = OMAP2_CONTROL_DEVCONF0;
-		sel_bit = 2;
-		break;
-	case 1:
-		reg = OMAP2_CONTROL_DEVCONF0;
-		sel_bit = 6;
-		break;
-	case 2:
-		reg = reg_devconf1;
-		sel_bit = 0;
-		break;
-	case 3:
-		reg = reg_devconf1;
-		sel_bit = 2;
-		break;
-	case 4:
-		reg = reg_devconf1;
-		sel_bit = 4;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (clk_id == OMAP_MCBSP_SYSCLK_CLKS_FCLK)
-		omap_ctrl_writel(omap_ctrl_readl(reg) & ~(1 << sel_bit), reg);
-	else
-		omap_ctrl_writel(omap_ctrl_readl(reg) | (1 << sel_bit), reg);
-
-	return 0;
-}
-
-static int omap_mcbsp_dai_set_rcvr_src(struct omap_mcbsp_data *mcbsp_data,
-				       int clk_id)
-{
-	int sel_bit, set = 0;
-	u16 reg = OMAP2_CONTROL_DEVCONF0;
-
-	if (cpu_class_is_omap1())
-		return -EINVAL; /* TODO: Can this be implemented for OMAP1? */
-	if (mcbsp_data->bus_id != 0)
-		return -EINVAL;
-
-	switch (clk_id) {
-	case OMAP_MCBSP_CLKR_SRC_CLKX:
-		set = 1;
-	case OMAP_MCBSP_CLKR_SRC_CLKR:
-		sel_bit = 3;
-		break;
-	case OMAP_MCBSP_FSR_SRC_FSX:
-		set = 1;
-	case OMAP_MCBSP_FSR_SRC_FSR:
-		sel_bit = 4;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (set)
-		omap_ctrl_writel(omap_ctrl_readl(reg) | (1 << sel_bit), reg);
-	else
-		omap_ctrl_writel(omap_ctrl_readl(reg) & ~(1 << sel_bit), reg);
-
-	return 0;
-}
-
 static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 					 int clk_id, unsigned int freq,
 					 int dir)
@@ -703,6 +615,14 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 	struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
 	int err = 0;
 
+	/* The McBSP signal muxing functions are only available on McBSP1 */
+	if (clk_id == OMAP_MCBSP_CLKR_SRC_CLKR ||
+	    clk_id == OMAP_MCBSP_CLKR_SRC_CLKX ||
+	    clk_id == OMAP_MCBSP_FSR_SRC_FSR ||
+	    clk_id == OMAP_MCBSP_FSR_SRC_FSX)
+		if (cpu_class_is_omap1() || mcbsp_data->bus_id != 0)
+			return -EINVAL;
+
 	mcbsp_data->in_freq = freq;
 
 	switch (clk_id) {
@@ -710,8 +630,20 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 		regs->srgr2	|= CLKSM;
 		break;
 	case OMAP_MCBSP_SYSCLK_CLKS_FCLK:
+		if (cpu_class_is_omap1()) {
+			err = -EINVAL;
+			break;
+		}
+		err = omap2_mcbsp_set_clks_src(mcbsp_data->bus_id,
+					       MCBSP_CLKS_PRCM_SRC);
+		break;
 	case OMAP_MCBSP_SYSCLK_CLKS_EXT:
-		err = omap_mcbsp_dai_set_clks_src(mcbsp_data, clk_id);
+		if (cpu_class_is_omap1()) {
+			err = 0;
+			break;
+		}
+		err = omap2_mcbsp_set_clks_src(mcbsp_data->bus_id,
+					       MCBSP_CLKS_PAD_SRC);
 		break;
 
 	case OMAP_MCBSP_SYSCLK_CLKX_EXT:
@@ -720,11 +652,18 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
 		regs->pcr0	|= SCLKME;
 		break;
 
+
 	case OMAP_MCBSP_CLKR_SRC_CLKR:
+		omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKR);
+		break;
 	case OMAP_MCBSP_CLKR_SRC_CLKX:
+		omap2_mcbsp1_mux_clkr_src(CLKR_SRC_CLKX);
+		break;
 	case OMAP_MCBSP_FSR_SRC_FSR:
+		omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSR);
+		break;
 	case OMAP_MCBSP_FSR_SRC_FSX:
-		err = omap_mcbsp_dai_set_rcvr_src(mcbsp_data, clk_id);
+		omap2_mcbsp1_mux_fsr_src(FSR_SRC_FSX);
 		break;
 	default:
 		err = -ENODEV;