[SCSI] bnx2i: Removed the reference to the netdev->base_addr

The netdev->base_addr parameter has been deprecated in the L2 bnx2
driver.  This is used by bnx2i for the BARn iomapping.

This patch will directly reference the pci_resource_start instead
of using the deprecated netdev->base_addr.

This patch is actually a critical bug fix as the 1G bnx2 driver no
longer supports the netdev->base_addr in the current kernel of the scsi
tree.  This means that Broadcom's 1G Linux iSCSI offload solution would
not work at all without this patch. 

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/bnx2i/bnx2i.h

@@ -350,6 +350,7 @@ struct bnx2i_hba {
 	struct pci_dev *pcidev;
 	struct net_device *netdev;
 	void __iomem *regview;
+	resource_size_t reg_base;
 
 	u32 age;
 	unsigned long cnic_dev_type;

drivers/scsi/bnx2i/bnx2i_hwi.c

@@ -2724,7 +2724,6 @@ int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep)
 		goto arm_cq;
 	}
 
-	reg_base = ep->hba->netdev->base_addr;
 	if ((test_bit(BNX2I_NX2_DEV_5709, &ep->hba->cnic_dev_type)) &&
 	    (ep->hba->mail_queue_access == BNX2I_MQ_BIN_MODE)) {
 		config2 = REG_RD(ep->hba, BNX2_MQ_CONFIG2);
@@ -2740,7 +2739,7 @@ int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep)
 		/* 5709 device in normal node and 5706/5708 devices */
 		reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
 
-	ep->qp.ctx_base = ioremap_nocache(reg_base + reg_off,
+	ep->qp.ctx_base = ioremap_nocache(ep->hba->reg_base + reg_off,
 					  MB_KERNEL_CTX_SIZE);
 	if (!ep->qp.ctx_base)
 		return -ENOMEM;

drivers/scsi/bnx2i/bnx2i_iscsi.c

@@ -811,13 +811,13 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic)
 	bnx2i_identify_device(hba);
 	bnx2i_setup_host_queue_size(hba, shost);
 
+	hba->reg_base = pci_resource_start(hba->pcidev, 0);
 	if (test_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type)) {
-		hba->regview = ioremap_nocache(hba->netdev->base_addr,
-					       BNX2_MQ_CONFIG2);
+		hba->regview = pci_iomap(hba->pcidev, 0, BNX2_MQ_CONFIG2);
 		if (!hba->regview)
 			goto ioreg_map_err;
 	} else if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) {
-		hba->regview = ioremap_nocache(hba->netdev->base_addr, 4096);
+		hba->regview = pci_iomap(hba->pcidev, 0, 4096);
 		if (!hba->regview)
 			goto ioreg_map_err;
 	}
@@ -884,7 +884,7 @@ cid_que_err:
 	bnx2i_free_mp_bdt(hba);
 mp_bdt_mem_err:
 	if (hba->regview) {
-		iounmap(hba->regview);
+		pci_iounmap(hba->pcidev, hba->regview);
 		hba->regview = NULL;
 	}
 ioreg_map_err:
@@ -910,7 +910,7 @@ void bnx2i_free_hba(struct bnx2i_hba *hba)
 	pci_dev_put(hba->pcidev);
 
 	if (hba->regview) {
-		iounmap(hba->regview);
+		pci_iounmap(hba->pcidev, hba->regview);
 		hba->regview = NULL;
 	}
 	bnx2i_free_mp_bdt(hba);