DM9000 use dev_xxx() instead of printk for output.

Move to using dev_dbg() and friends for the output of
information to the user.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/net/dm9000.c

@@ -143,6 +143,8 @@ typedef struct board_info {
 	void (*outblk)(void __iomem *port, void *data, int length);
 	void (*dumpblk)(void __iomem *port, int length);
 
+	struct device	*dev;	     /* parent device */
+
 	struct resource	*addr_res;   /* resources found */
 	struct resource *data_res;
 	struct resource	*addr_req;   /* resources requested */
@@ -185,7 +187,8 @@ static void program_eeprom(board_info_t * db);
 static void
 dm9000_reset(board_info_t * db)
 {
-	PRINTK1("dm9000x: resetting\n");
+	dev_dbg(db->dev, "resetting device\n");
+
 	/* RESET device */
 	writeb(DM9000_NCR, db->io_addr);
 	udelay(200);
@@ -301,14 +304,10 @@ static void dm9000_set_io(struct board_info *db, int byte_width)
 		db->inblk   = dm9000_inblk_8bit;
 		break;
 
-	case 2:
-		db->dumpblk = dm9000_dumpblk_16bit;
-		db->outblk  = dm9000_outblk_16bit;
-		db->inblk   = dm9000_inblk_16bit;
-		break;
 
 	case 3:
-		printk(KERN_ERR PFX ": 3 byte IO, falling back to 16bit\n");
+		dev_dbg(db->dev, ": 3 byte IO, falling back to 16bit\n");
+	case 2:
 		db->dumpblk = dm9000_dumpblk_16bit;
 		db->outblk  = dm9000_outblk_16bit;
 		db->inblk   = dm9000_inblk_16bit;
@@ -411,18 +410,20 @@ dm9000_probe(struct platform_device *pdev)
 	/* Init network device */
 	ndev = alloc_etherdev(sizeof (struct board_info));
 	if (!ndev) {
-		printk("%s: could not allocate device.\n", CARDNAME);
+		dev_err(&pdev->dev, "could not allocate device.\n");
 		return -ENOMEM;
 	}
 
 	SET_NETDEV_DEV(ndev, &pdev->dev);
 
-	PRINTK2("dm9000_probe()");
+	dev_dbg(&pdev->dev, "dm9000_probe()");
 
 	/* setup board info structure */
 	db = (struct board_info *) ndev->priv;
 	memset(db, 0, sizeof (*db));
 
+	db->dev = &pdev->dev;
+
 	spin_lock_init(&db->lock);
 
 	if (pdev->num_resources < 2) {
@@ -451,7 +452,7 @@ dm9000_probe(struct platform_device *pdev)
 
 		if (db->addr_res == NULL || db->data_res == NULL ||
 		    db->irq_res == NULL) {
-			printk(KERN_ERR PFX "insufficient resources\n");
+			dev_err(db->dev, "insufficient resources\n");
 			ret = -ENOENT;
 			goto out;
 		}
@@ -461,7 +462,7 @@ dm9000_probe(struct platform_device *pdev)
 						  pdev->name);
 
 		if (db->addr_req == NULL) {
-			printk(KERN_ERR PFX "cannot claim address reg area\n");
+			dev_err(db->dev, "cannot claim address reg area\n");
 			ret = -EIO;
 			goto out;
 		}
@@ -469,7 +470,7 @@ dm9000_probe(struct platform_device *pdev)
 		db->io_addr = ioremap(db->addr_res->start, i);
 
 		if (db->io_addr == NULL) {
-			printk(KERN_ERR "failed to ioremap address reg\n");
+			dev_err(db->dev, "failed to ioremap address reg\n");
 			ret = -EINVAL;
 			goto out;
 		}
@@ -479,7 +480,7 @@ dm9000_probe(struct platform_device *pdev)
 						  pdev->name);
 
 		if (db->data_req == NULL) {
-			printk(KERN_ERR PFX "cannot claim data reg area\n");
+			dev_err(db->dev, "cannot claim data reg area\n");
 			ret = -EIO;
 			goto out;
 		}
@@ -487,7 +488,7 @@ dm9000_probe(struct platform_device *pdev)
 		db->io_data = ioremap(db->data_res->start, iosize);
 
 		if (db->io_data == NULL) {
-			printk(KERN_ERR "failed to ioremap data reg\n");
+			dev_err(db->dev,"failed to ioremap data reg\n");
 			ret = -EINVAL;
 			goto out;
 		}
@@ -541,11 +542,11 @@ dm9000_probe(struct platform_device *pdev)
 
 		if (id_val == DM9000_ID)
 			break;
-		printk("%s: read wrong id 0x%08x\n", CARDNAME, id_val);
+		dev_err(db->dev, "read wrong id 0x%08x\n", id_val);
 	}
 
 	if (id_val != DM9000_ID) {
-		printk("%s: wrong id: 0x%08x\n", CARDNAME, id_val);
+		dev_err(db->dev, "wrong id: 0x%08x\n", id_val);
 		ret = -ENODEV;
 		goto out;
 	}
@@ -593,8 +594,8 @@ dm9000_probe(struct platform_device *pdev)
 	}
 
 	if (!is_valid_ether_addr(ndev->dev_addr))
-		printk("%s: Invalid ethernet MAC address.  Please "
-		       "set using ifconfig\n", ndev->name);
+		dev_warn(db->dev, "%s: Invalid ethernet MAC address. Please "
+			 "set using ifconfig\n", ndev->name);
 
 	platform_set_drvdata(pdev, ndev);
 	ret = register_netdev(ndev);
@@ -608,7 +609,7 @@ dm9000_probe(struct platform_device *pdev)
 	return 0;
 
 out:
-	printk("%s: not found (%d).\n", CARDNAME, ret);
+	dev_err(db->dev, "not found (%d).\n", ret);
 
 	dm9000_release_board(pdev, db);
 	free_netdev(ndev);
@@ -625,7 +626,7 @@ dm9000_open(struct net_device *dev)
 {
 	board_info_t *db = (board_info_t *) dev->priv;
 
-	PRINTK2("entering dm9000_open\n");
+	dev_dbg(db->dev, "entering %s\n", __func__);
 
 	if (request_irq(dev->irq, &dm9000_interrupt, DM9000_IRQ_FLAGS, dev->name, dev))
 		return -EAGAIN;
@@ -900,7 +901,7 @@ dm9000_rx(struct net_device *dev)
 
 		/* Status check: this byte must be 0 or 1 */
 		if (rxbyte > DM9000_PKT_RDY) {
-			printk("status check failed: %d\n", rxbyte);
+			dev_warn(db->dev, "status check fail: %d\n", rxbyte);
 			iow(db, DM9000_RCR, 0x00);	/* Stop Device */
 			iow(db, DM9000_ISR, IMR_PAR);	/* Stop INT request */
 			return;
@@ -920,25 +921,25 @@ dm9000_rx(struct net_device *dev)
 		/* Packet Status check */
 		if (RxLen < 0x40) {
 			GoodPacket = false;
-			PRINTK1("Bad Packet received (runt)\n");
+			dev_dbg(db->dev, "Bad Packet received (runt)\n");
 		}
 
 		if (RxLen > DM9000_PKT_MAX) {
-			PRINTK1("RST: RX Len:%x\n", RxLen);
+			dev_dbg(db->dev, "RST: RX Len:%x\n", RxLen);
 		}
 
 		if (rxhdr.RxStatus & 0xbf) {
 			GoodPacket = false;
 			if (rxhdr.RxStatus & 0x01) {
-				PRINTK1("fifo error\n");
+				dev_dbg(db->dev, "fifo error\n");
 				dev->stats.rx_fifo_errors++;
 			}
 			if (rxhdr.RxStatus & 0x02) {
-				PRINTK1("crc error\n");
+				dev_dbg(db->dev, "crc error\n");
 				dev->stats.rx_crc_errors++;
 			}
 			if (rxhdr.RxStatus & 0x80) {
-				PRINTK1("length error\n");
+				dev_dbg(db->dev, "length error\n");
 				dev->stats.rx_length_errors++;
 			}
 		}
@@ -1187,8 +1188,7 @@ dm9000_drv_remove(struct platform_device *pdev)
 	dm9000_release_board(pdev, (board_info_t *) ndev->priv);
 	free_netdev(ndev);		/* free device structure */
 
-	PRINTK1("clean_module() exit\n");
-
+	dev_dbg(&pdev->dev, "released and freed device\n");
 	return 0;
 }