[libata] More PATA driver ->cable_detect support

Roll-up of ->cable_detect feature addition patches, authored and
signed-off-by Alan Cox.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/ata/pata_artop.c

@@ -49,8 +49,6 @@ static int artop6210_pre_reset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
 		return -ENOENT;
-
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -85,18 +83,28 @@ static int artop6260_pre_reset(struct ata_port *ap)
 	};
 
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u8 tmp;
 
 	/* Odd numbered device ids are the units with enable bits (the -R cards) */
 	if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
 		return -ENOENT;
+	return ata_std_prereset(ap);
+}
 
+/**
+ *	artop6260_cable_detect	-	identify cable type
+ *	@ap: Port
+ *
+ *	Identify the cable type for the ARTOp interface in question
+ */
+ 
+static int artop6260_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 tmp;
 	pci_read_config_byte(pdev, 0x49, &tmp);
 	if (tmp & (1 << ap->port_no))
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
 }
 
 /**
@@ -225,7 +233,7 @@ static void artop6260_set_piomode(struct ata_port *ap, struct ata_device *adev)
 /**
  *	artop6210_set_dmamode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
- *	@adev: um
+ *	@adev: Device whose timings we are configuring
  *
  *	Set DMA mode for device, in host controller PCI config space.
  *
@@ -333,6 +341,7 @@ static const struct ata_port_operations artop6210_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= artop6210_error_handler,
 	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_40wire,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
@@ -366,6 +375,7 @@ static const struct ata_port_operations artop6260_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= artop6260_error_handler,
 	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= artop6260_cable_detect,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,

drivers/ata/pata_cmd64x.c

@@ -75,13 +75,7 @@ enum {
 	DTPR1		= 0x7C
 };
 
-static int cmd64x_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-static int cmd648_pre_reset(struct ata_port *ap)
+static int cmd648_cable_detect(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u8 r;
@@ -89,21 +83,8 @@ static int cmd648_pre_reset(struct ata_port *ap)
 	/* Check cable detect bits */
 	pci_read_config_byte(pdev, BMIDECSR, &r);
 	if (r & (1 << ap->port_no))
-		ap->cbl = ATA_CBL_PATA80;
-	else
-		ap->cbl = ATA_CBL_PATA40;
-
-	return ata_std_prereset(ap);
-}
-
-static void cmd64x_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, cmd64x_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-static void cmd648_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, cmd648_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
+		return ATA_CBL_PATA80;
+	return ATA_CBL_PATA40;
 }
 
 /**
@@ -304,8 +285,9 @@ static struct ata_port_operations cmd64x_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cmd64x_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -338,8 +320,9 @@ static struct ata_port_operations cmd646r1_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cmd64x_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -372,8 +355,9 @@ static struct ata_port_operations cmd648_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cmd648_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= cmd648_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,

drivers/ata/pata_cs5520.c

@@ -139,18 +139,6 @@ static void cs5520_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	cs5520_set_timings(ap, adev, adev->pio_mode);
 }
 
-
-static int cs5520_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-static void cs5520_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, cs5520_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 static struct scsi_host_template cs5520_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
@@ -186,8 +174,9 @@ static struct ata_port_operations cs5520_port_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= cs5520_error_handler,
+	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_40wire,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,

drivers/ata/pata_cs5530.c

@@ -160,18 +160,6 @@ static unsigned int cs5530_qc_issue_prot(struct ata_queued_cmd *qc)
 	return ata_qc_issue_prot(qc);
 }
 
-static int cs5530_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-static void cs5530_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, cs5530_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
-
 static struct scsi_host_template cs5530_sht = {
 	.module			= THIS_MODULE,
 	.name			= DRV_NAME,
@@ -213,8 +201,9 @@ static struct ata_port_operations cs5530_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cs5530_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= cs5530_qc_issue_prot,

drivers/ata/pata_hpt3x3.c

@@ -25,25 +25,6 @@
 #define DRV_NAME	"pata_hpt3x3"
 #define DRV_VERSION	"0.4.2"
 
-static int hpt3x3_probe_init(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-/**
- *	hpt3x3_probe_reset	-	reset the hpt3x3 bus
- *	@ap: ATA port to reset
- *
- *	Perform the housekeeping when doing an ATA bus reeset. We just
- *	need to force the cable type.
- */
-
-static void hpt3x3_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, hpt3x3_probe_init, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	hpt3x3_set_piomode		-	PIO setup
  *	@ap: ATA interface
@@ -139,8 +120,9 @@ static struct ata_port_operations hpt3x3_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= hpt3x3_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,

drivers/ata/pata_isapnp.c

@@ -49,6 +49,7 @@ static struct ata_port_operations isapnp_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,

drivers/ata/pata_ixp4xx_cf.c

@@ -129,6 +129,7 @@ static struct ata_port_operations ixp4xx_port_ops = {
 	.qc_issue	= ata_qc_issue_prot,
 	.eng_timeout	= ata_eng_timeout,
 	.data_xfer	= ixp4xx_mmio_data_xfer,
+	.cable_detect	= ata_cable_40wire,
 
 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ixp4xx_irq_clear,

drivers/ata/pata_legacy.c

@@ -162,6 +162,7 @@ static struct ata_port_operations simple_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -185,6 +186,7 @@ static struct ata_port_operations legacy_port_ops = {
 	.check_status 	= ata_check_status,
 	.exec_command	= ata_exec_command,
 	.dev_select 	= ata_std_dev_select,
+	.cable_detect	= ata_cable_40wire,
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
@@ -305,6 +307,7 @@ static struct ata_port_operations pdc20230_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -360,6 +363,7 @@ static struct ata_port_operations ht6560a_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -426,6 +430,7 @@ static struct ata_port_operations ht6560b_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -547,6 +552,7 @@ static struct ata_port_operations opti82c611a_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -680,6 +686,7 @@ static struct ata_port_operations opti82c46x_port_ops = {
 	.thaw		= ata_bmdma_thaw,
 	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= opti82c46x_qc_issue_prot,