Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (24 commits)
  microblaze: Disable heartbeat/enable emaclite in defconfigs
  microblaze: Support simpleImage.dts make target
  microblaze: Fix _start symbol to physical address
  microblaze: Use LOAD_OFFSET macro to get correct LMA for all sections
  microblaze: Create the LOAD_OFFSET macro used to compute VMA vs LMA offsets
  microblaze: Copy ppc asm-compat.h for clean handling of constants in asm and C
  microblaze: Actually show KiB rather than pages in "Freeing initrd memory:"
  microblaze: Support ptrace syscall tracing.
  microblaze: Updated CPU version and FPGA family codes in PVR
  microblaze: Generate correct signal and siginfo for integer div-by-zero
  microblaze: Don't be noisy when userspace causes hardware exceptions
  microblaze: Remove ipc.h file which points to non-existing asm-generic file
  microblaze: Clear sticky FSR register after generating exception signals
  microblaze: Ensure CPU usermode is set on new userspace processes
  microblaze: Use correct kbuild variable KBUILD_CFLAGS
  microblaze: Save and restore msr in hw exception
  microblaze: Add architectural support for USB EHCI host controllers
  microblaze: Implement include/asm/syscall.h.
  microblaze: Improve checking mechanism for MSR instruction
  microblaze: Add checking mechanism for MSR instruction
  ...

arch/microblaze/Kconfig

@@ -6,6 +6,7 @@ mainmenu "Linux/Microblaze Kernel Configuration"
 config MICROBLAZE
 	def_bool y
 	select HAVE_LMB
+	select USB_ARCH_HAS_EHCI
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 
 config SWAP

arch/microblaze/Makefile

@@ -37,12 +37,12 @@ CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
 CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
 
 # r31 holds current when in kernel mode
-KBUILD_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
+KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
 
 LDFLAGS		:=
 LDFLAGS_vmlinux	:=
 
-LIBGCC := $(shell $(CC) $(KBUILD_KERNEL) -print-libgcc-file-name)
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
 head-y := arch/microblaze/kernel/head.o
 libs-y += arch/microblaze/lib/
@@ -53,22 +53,41 @@ core-y += arch/microblaze/platform/
 
 boot := arch/microblaze/boot
 
+# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
+DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
+
+ifneq ($(DTB),)
+	core-y	+= $(boot)/
+endif
+
 # defines filename extension depending memory management type
 ifeq ($(CONFIG_MMU),)
 MMU := -nommu
 endif
 
-export MMU
+export MMU DTB
 
 all: linux.bin
 
+BOOT_TARGETS = linux.bin linux.bin.gz simpleImage.%
+
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
 
-linux.bin linux.bin.gz: vmlinux
+$(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
 
 define archhelp
-  echo  '* linux.bin    - Create raw binary'
-  echo  '  linux.bin.gz - Create compressed raw binary'
+  echo '* linux.bin    - Create raw binary'
+  echo '  linux.bin.gz - Create compressed raw binary'
+  echo '  simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
+  echo '                   - stripped elf with fdt blob
+  echo '  simpleImage.<dt>.unstrip - full ELF image with fdt blob'
+  echo '  *_defconfig      - Select default config from arch/microblaze/configs'
+  echo ''
+  echo '  Targets with <dt> embed a device tree blob inside the image'
+  echo '  These targets support board with firmware that does not'
+  echo '  support passing a device tree directly. Replace <dt> with the'
+  echo '  name of a dts file from the arch/microblaze/boot/dts/ directory'
+  echo '  (minus the .dts extension).'
 endef

arch/microblaze/boot/Makefile

@@ -2,10 +2,24 @@
 # arch/microblaze/boot/Makefile
 #
 
-targets := linux.bin linux.bin.gz
+obj-y += linked_dtb.o
+
+targets := linux.bin linux.bin.gz simpleImage.%
 
 OBJCOPYFLAGS_linux.bin  := -O binary
 
+# Where the DTS files live
+dtstree         := $(srctree)/$(src)/dts
+
+# Ensure system.dtb exists
+$(obj)/linked_dtb.o: $(obj)/system.dtb
+
+# Generate system.dtb from $(DTB).dtb
+ifneq ($(DTB),system)
+$(obj)/system.dtb: $(obj)/$(DTB).dtb
+	$(call if_changed,cp)
+endif
+
 $(obj)/linux.bin: vmlinux FORCE
 	[ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \
 	touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image"
@@ -16,4 +30,27 @@ $(obj)/linux.bin.gz: $(obj)/linux.bin FORCE
 	$(call if_changed,gzip)
 	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
 
-clean-kernel += linux.bin linux.bin.gz
+quiet_cmd_cp = CP      $< $@$2
+	cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
+
+quiet_cmd_strip = STRIP   $@
+      cmd_strip = $(STRIP) -K _start -K _end -K __log_buf -K _fdt_start vmlinux -o $@
+
+$(obj)/simpleImage.%: vmlinux FORCE
+	$(call if_changed,cp,.unstrip)
+	$(call if_changed,strip)
+	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+
+# Rule to build device tree blobs
+DTC = $(objtree)/scripts/dtc/dtc
+
+# Rule to build device tree blobs
+quiet_cmd_dtc = DTC     $@
+	cmd_dtc = $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 -p 1024 $(dtstree)/$*.dts
+
+$(obj)/%.dtb: $(dtstree)/%.dts FORCE
+	$(call if_changed,dtc)
+
+clean-kernel += linux.bin linux.bin.gz simpleImage.*
+
+clean-files += *.dtb

arch/microblaze/boot/dts/system.dts

@@ -0,0 +1 @@
+../../platform/generic/system.dts

arch/microblaze/boot/linked_dtb.S

@@ -0,0 +1,3 @@
+.section __fdt_blob,"a"
+.incbin "arch/microblaze/boot/system.dtb"
+

arch/microblaze/configs/mmu_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Tue Aug 18 11:00:02 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 10:28:50 2009
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -42,11 +42,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
@@ -260,6 +261,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -357,12 +359,10 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_KS8842 is not set
+CONFIG_XILINX_EMACLITE=y
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -460,6 +460,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -488,6 +489,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -546,7 +548,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -671,18 +672,20 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_KMEMCHECK is not set
 CONFIG_EARLY_PRINTK=y
-CONFIG_HEART_BEAT=y
+# CONFIG_HEART_BEAT is not set
 CONFIG_DEBUG_BOOTMEM=y
 
 #
@@ -697,7 +700,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -729,11 +731,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

arch/microblaze/configs/nommu_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Tue Aug 18 10:35:30 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 10:29:43 2009
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -44,11 +44,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
@@ -243,6 +244,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -272,6 +274,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -279,7 +282,6 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -304,6 +306,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
 
 #
@@ -349,6 +352,7 @@ CONFIG_MTD_RAM=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 # CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PHYSMAP_OF is not set
 CONFIG_MTD_UCLINUX=y
 # CONFIG_MTD_PLATRAM is not set
 
@@ -429,12 +433,10 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_KS8842 is not set
+# CONFIG_XILINX_EMACLITE is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -535,7 +537,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -579,6 +581,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -639,7 +642,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -710,18 +712,20 @@ CONFIG_DEBUG_INFO=y
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_EARLY_PRINTK=y
-CONFIG_HEART_BEAT=y
+# CONFIG_HEART_BEAT is not set
 # CONFIG_DEBUG_BOOTMEM is not set
 
 #
@@ -736,7 +740,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -768,11 +771,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

arch/microblaze/include/asm/asm-compat.h

@@ -0,0 +1,17 @@
+#ifndef _ASM_MICROBLAZE_ASM_COMPAT_H
+#define _ASM_MICROBLAZE_ASM_COMPAT_H
+
+#include <asm/types.h>
+
+#ifdef __ASSEMBLY__
+#  define stringify_in_c(...)	__VA_ARGS__
+#  define ASM_CONST(x)		x
+#else
+/* This version of stringify will deal with commas... */
+#  define __stringify_in_c(...)	#__VA_ARGS__
+#  define stringify_in_c(...)	__stringify_in_c(__VA_ARGS__) " "
+#  define __ASM_CONST(x)	x##UL
+#  define ASM_CONST(x)		__ASM_CONST(x)
+#endif
+
+#endif /* _ASM_MICROBLAZE_ASM_COMPAT_H */

arch/microblaze/include/asm/io.h

@@ -210,6 +210,9 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
 #define in_be32(a) __raw_readl((const void __iomem __force *)(a))
 #define in_be16(a) __raw_readw(a)
 
+#define writel_be(v, a)	out_be32((__force unsigned *)a, v)
+#define readl_be(a)	in_be32((__force unsigned *)a)
+
 /*
  * Little endian
  */

arch/microblaze/include/asm/ipc.h

@@ -1 +0,0 @@
-#include <asm-generic/ipc.h>

arch/microblaze/include/asm/page.h

@@ -17,6 +17,7 @@
 
 #include <linux/pfn.h>
 #include <asm/setup.h>
+#include <asm/asm-compat.h>
 #include <linux/const.h>
 
 #ifdef __KERNEL__
@@ -26,6 +27,8 @@
 #define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
+#define LOAD_OFFSET	ASM_CONST((CONFIG_KERNEL_START-CONFIG_KERNEL_BASE_ADDR))
+
 #ifndef __ASSEMBLY__
 
 #define PAGE_UP(addr)	(((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))

arch/microblaze/include/asm/setup.h

@@ -38,7 +38,7 @@ extern void early_console_reg_tlb_alloc(unsigned int addr);
 void time_init(void);
 void init_IRQ(void);
 void machine_early_init(const char *cmdline, unsigned int ram,
-						unsigned int fdt);
+			unsigned int fdt, unsigned int msr);
 
 void machine_restart(char *cmd);
 void machine_shutdown(void);

arch/microblaze/include/asm/syscall.h

@@ -0,0 +1,99 @@
+#ifndef __ASM_MICROBLAZE_SYSCALL_H
+#define __ASM_MICROBLAZE_SYSCALL_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in R12 */
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return regs->r12;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	/* TODO.  */
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	return IS_ERR_VALUE(regs->r3) ? regs->r3 : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->r3;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error)
+		regs->r3 = -error;
+	else
+		regs->r3 = val;
+}
+
+static inline microblaze_reg_t microblaze_get_syscall_arg(struct pt_regs *regs,
+							  unsigned int n)
+{
+	switch (n) {
+	case 5: return regs->r10;
+	case 4: return regs->r9;
+	case 3: return regs->r8;
+	case 2: return regs->r7;
+	case 1: return regs->r6;
+	case 0: return regs->r5;
+	default:
+		BUG();
+	}
+	return ~0;
+}
+
+static inline void microblaze_set_syscall_arg(struct pt_regs *regs,
+					      unsigned int n,
+					      unsigned long val)
+{
+	switch (n) {
+	case 5:
+		regs->r10 = val;
+	case 4:
+		regs->r9 = val;
+	case 3:
+		regs->r8 = val;
+	case 2:
+		regs->r7 = val;
+	case 1:
+		regs->r6 = val;
+	case 0:
+		regs->r5 = val;
+	default:
+		BUG();
+	}
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	while (n--)
+		*args++ = microblaze_get_syscall_arg(regs, i++);
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	while (n--)
+		microblaze_set_syscall_arg(regs, i++, *args++);
+}
+
+#endif /* __ASM_MICROBLAZE_SYSCALL_H */

arch/microblaze/kernel/cpu/cpuinfo.c

@@ -28,6 +28,7 @@ const struct cpu_ver_key cpu_ver_lookup[] = {
 	{"7.10.d", 0x0b},
 	{"7.20.a", 0x0c},
 	{"7.20.b", 0x0d},
+	{"7.20.c", 0x0e},
 	/* FIXME There is no keycode defined in MBV for these versions */
 	{"2.10.a", 0x10},
 	{"3.00.a", 0x20},
@@ -49,6 +50,8 @@ const struct family_string_key family_string_lookup[] = {
 	{"spartan3a", 0xa},
 	{"spartan3an", 0xb},
 	{"spartan3adsp", 0xc},
+	{"spartan6", 0xd},
+	{"virtex6", 0xe},
 	/* FIXME There is no key code defined for spartan2 */
 	{"spartan2", 0xf0},
 	{NULL, 0},

arch/microblaze/kernel/entry.S

@@ -308,38 +308,69 @@ C_ENTRY(_user_exception):
 	swi	r12, r1, PTO+PT_R0;
 	tovirt(r1,r1)
 
-	la	r15, r0, ret_from_trap-8
 /* where the trap should return need -8 to adjust for rtsd r15, 8*/
 /* Jump to the appropriate function for the system call number in r12
  * (r12 is not preserved), or return an error if r12 is not valid. The LP
  * register should point to the location where
  * the called function should return.  [note that MAKE_SYS_CALL uses label 1] */
-	/* See if the system call number is valid.  */
+
+	# Step into virtual mode.
+	set_vms;
+	addik	r11, r0, 3f
+	rtid	r11, 0
+	nop
+3:
+	add	r11, r0, CURRENT_TASK	 /* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO /* get thread info */
+	lwi	r11, r11, TI_FLAGS	 /* get flags in thread info */
+	andi	r11, r11, _TIF_WORK_SYSCALL_MASK
+	beqi	r11, 4f
+
+	addik	r3, r0, -ENOSYS
+	swi	r3, r1, PTO + PT_R3
+	brlid	r15, do_syscall_trace_enter
+	addik	r5, r1, PTO + PT_R0
+
+	# do_syscall_trace_enter returns the new syscall nr.
+	addk	r12, r0, r3
+	lwi	r5, r1, PTO+PT_R5;
+	lwi	r6, r1, PTO+PT_R6;
+	lwi	r7, r1, PTO+PT_R7;
+	lwi	r8, r1, PTO+PT_R8;
+	lwi	r9, r1, PTO+PT_R9;
+	lwi	r10, r1, PTO+PT_R10;
+4:
+/* Jump to the appropriate function for the system call number in r12
+ * (r12 is not preserved), or return an error if r12 is not valid.
+ * The LP register should point to the location where the called function
+ * should return.  [note that MAKE_SYS_CALL uses label 1] */
+	/* See if the system call number is valid */
 	addi	r11, r12, -__NR_syscalls;
-	bgei	r11,1f;
+	bgei	r11,5f;
 	/* Figure out which function to use for this system call.  */
 	/* Note Microblaze barrel shift is optional, so don't rely on it */
 	add	r12, r12, r12;			/* convert num -> ptr */
 	add	r12, r12, r12;
 
 	/* Trac syscalls and stored them to r0_ram */
-	lwi	r3, r12, 0x400 + TOPHYS(r0_ram)
+	lwi	r3, r12, 0x400 + r0_ram
 	addi	r3, r3, 1
-	swi	r3, r12, 0x400 + TOPHYS(r0_ram)
+	swi	r3, r12, 0x400 + r0_ram
+
+	# Find and jump into the syscall handler.
+	lwi	r12, r12, sys_call_table
+	/* where the trap should return need -8 to adjust for rtsd r15, 8 */
+	la	r15, r0, ret_from_trap-8
+	bra	r12
 
-	lwi	r12, r12, TOPHYS(sys_call_table); /* Function ptr */
-	/* Make the system call.  to r12*/
-	set_vms;
-	rtid	r12, 0;
-	nop;
 	/* The syscall number is invalid, return an error.  */
-1:	VM_ON;	/* RETURN() expects virtual mode*/
+5:
 	addi	r3, r0, -ENOSYS;
 	rtsd	r15,8;		/* looks like a normal subroutine return */
 	or 	r0, r0, r0
 
 
-/* Entry point used to return from a syscall/trap.  */
+/* Entry point used to return from a syscall/trap */
 /* We re-enable BIP bit before state restore */
 C_ENTRY(ret_from_trap):
 	set_bip;			/*  Ints masked for state restore*/
@@ -347,6 +378,23 @@ C_ENTRY(ret_from_trap):
 /* See if returning to kernel mode, if so, skip resched &c.  */
 	bnei	r11, 2f;
 
+	/* We're returning to user mode, so check for various conditions that
+	 * trigger rescheduling. */
+	# FIXME: Restructure all these flag checks.
+	add	r11, r0, CURRENT_TASK;	/* Get current task ptr into r11 */
+	lwi	r11, r11, TS_THREAD_INFO;	/* get thread info */
+	lwi	r11, r11, TI_FLAGS;		/* get flags in thread info */
+	andi	r11, r11, _TIF_WORK_SYSCALL_MASK
+	beqi	r11, 1f
+
+	swi	r3, r1, PTO + PT_R3
+	swi	r4, r1, PTO + PT_R4
+	brlid	r15, do_syscall_trace_leave
+	addik	r5, r1, PTO + PT_R0
+	lwi	r3, r1, PTO + PT_R3
+	lwi	r4, r1, PTO + PT_R4
+1:
+
 	/* We're returning to user mode, so check for various conditions that
 	 * trigger rescheduling. */
 	/* Get current task ptr into r11 */

arch/microblaze/kernel/exceptions.c

@@ -72,7 +72,8 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 #endif
 
 #if 0
-	printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n",
+	printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x " \
+							"ESR=%08x\n",
 			type, user_mode(regs) ? "user" : "kernel", fsr,
 			(unsigned int) regs->pc, (unsigned int) regs->esr);
 #endif
@@ -80,42 +81,50 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 	switch (type & 0x1F) {
 	case MICROBLAZE_ILL_OPCODE_EXCEPTION:
 		if (user_mode(regs)) {
-			printk(KERN_WARNING "Illegal opcode exception in user mode.\n");
+			pr_debug(KERN_WARNING "Illegal opcode exception " \
+							"in user mode.\n");
 			_exception(SIGILL, regs, ILL_ILLOPC, addr);
 			return;
 		}
-		printk(KERN_WARNING "Illegal opcode exception in kernel mode.\n");
+		printk(KERN_WARNING "Illegal opcode exception " \
+							"in kernel mode.\n");
 		die("opcode exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_IBUS_EXCEPTION:
 		if (user_mode(regs)) {
-			printk(KERN_WARNING "Instruction bus error exception in user mode.\n");
+			pr_debug(KERN_WARNING "Instruction bus error " \
+						"exception in user mode.\n");
 			_exception(SIGBUS, regs, BUS_ADRERR, addr);
 			return;
 		}
-		printk(KERN_WARNING "Instruction bus error exception in kernel mode.\n");
+		printk(KERN_WARNING "Instruction bus error exception " \
+							"in kernel mode.\n");
 		die("bus exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_DBUS_EXCEPTION:
 		if (user_mode(regs)) {
-			printk(KERN_WARNING "Data bus error exception in user mode.\n");
+			pr_debug(KERN_WARNING "Data bus error exception " \
+							"in user mode.\n");
 			_exception(SIGBUS, regs, BUS_ADRERR, addr);
 			return;
 		}
-		printk(KERN_WARNING "Data bus error exception in kernel mode.\n");
+		printk(KERN_WARNING "Data bus error exception " \
+							"in kernel mode.\n");
 		die("bus exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_DIV_ZERO_EXCEPTION:
 		if (user_mode(regs)) {
-			printk(KERN_WARNING "Divide by zero exception in user mode\n");
-			_exception(SIGILL, regs, ILL_ILLOPC, addr);
+			pr_debug(KERN_WARNING "Divide by zero exception " \
+							"in user mode\n");
+			_exception(SIGILL, regs, FPE_INTDIV, addr);
 			return;
 		}
-		printk(KERN_WARNING "Divide by zero exception in kernel mode.\n");
+		printk(KERN_WARNING "Divide by zero exception " \
+							"in kernel mode.\n");
 		die("Divide by exception", regs, SIGBUS);
 		break;
 	case MICROBLAZE_FPU_EXCEPTION:
-		printk(KERN_WARNING "FPU exception\n");
+		pr_debug(KERN_WARNING "FPU exception\n");
 		/* IEEE FP exception */
 		/* I removed fsr variable and use code var for storing fsr */
 		if (fsr & FSR_IO)
@@ -133,7 +142,7 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 
 #ifdef CONFIG_MMU
 	case MICROBLAZE_PRIVILEGED_EXCEPTION:
-		printk(KERN_WARNING "Privileged exception\n");
+		pr_debug(KERN_WARNING "Privileged exception\n");
 		/* "brk r0,r0" - used as debug breakpoint */
 		if (get_user(code, (unsigned long *)regs->pc) == 0
 			&& code == 0x980c0000) {

arch/microblaze/kernel/head.S

@@ -54,6 +54,16 @@ ENTRY(_start)
 	mfs	r1, rmsr
 	andi	r1, r1, ~2
 	mts	rmsr, r1
+/*
+ * Here is checking mechanism which check if Microblaze has msr instructions
+ * We load msr and compare it with previous r1 value - if is the same,
+ * msr instructions works if not - cpu don't have them.
+ */
+	/* r8=0 - I have msr instr, 1 - I don't have them */
+	rsubi	r0, r0, 1	/* set the carry bit */
+	msrclr	r0, 0x4		/* try to clear it */
+	/* read the carry bit, r8 will be '0' if msrclr exists */
+	addik	r8, r0, 0
 
 /* r7 may point to an FDT, or there may be one linked in.
    if it's in r7, we've got to save it away ASAP.
@@ -209,8 +219,8 @@ start_here:
 	 * Please see $(ARCH)/mach-$(SUBARCH)/setup.c for
 	 * the function.
 	 */
-	la	r8, r0, machine_early_init
-	brald	r15, r8
+	la	r9, r0, machine_early_init
+	brald	r15, r9
 	nop
 
 #ifndef CONFIG_MMU

arch/microblaze/kernel/hw_exception_handler.S

@@ -84,9 +84,10 @@
 #define NUM_TO_REG(num)		r ## num
 
 #ifdef CONFIG_MMU
-/* FIXME you can't change first load of MSR because there is
- * hardcoded jump bri 4 */
 	#define RESTORE_STATE			\
+		lwi	r5, r1, 0;		\
+		mts	rmsr, r5;		\
+		nop;				\
 		lwi	r3, r1, PT_R3;		\
 		lwi	r4, r1, PT_R4;		\
 		lwi	r5, r1, PT_R5;		\
@@ -309,6 +310,9 @@ _hw_exception_handler:
 	lwi	r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)) /* get saved current */
 #endif
 
+	mfs	r5, rmsr;
+	nop
+	swi	r5, r1, 0;
 	mfs	r3, resr
 	nop
 	mfs	r4, rear;
@@ -380,6 +384,8 @@ handle_other_ex: /* Handle Other exceptions here */
 	addk	r8, r17, r0; /* Load exception address */
 	bralid	r15, full_exception; /* Branch to the handler */
 	nop;
+	mts	r0, rfsr;	/* Clear sticky fsr */
+	nop
 
 	/*
 	 * Trigger execution of the signal handler by enabling

arch/microblaze/kernel/process.c

@@ -235,6 +235,7 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
 	regs->pc = pc;
 	regs->r1 = usp;
 	regs->pt_mode = 0;
+	regs->msr |= MSR_UMS;
 }
 
 #ifdef CONFIG_MMU

arch/microblaze/kernel/ptrace.c

@@ -29,6 +29,10 @@
 #include <linux/sched.h>
 #include <linux/ptrace.h>
 #include <linux/signal.h>
+#include <linux/elf.h>
+#include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/tracehook.h>
 
 #include <linux/errno.h>
 #include <asm/processor.h>
@@ -174,6 +178,64 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return rval;
 }
 
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	long ret = 0;
+
+	secure_computing(regs->r12);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->regs[0].
+		 */
+		ret = -1L;
+
+	if (unlikely(current->audit_context))
+		audit_syscall_entry(EM_XILINX_MICROBLAZE, regs->r12,
+				    regs->r5, regs->r6,
+				    regs->r7, regs->r8);
+
+	return ret ?: regs->r12;
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	int step;
+
+	if (unlikely(current->audit_context))
+		audit_syscall_exit(AUDITSC_RESULT(regs->r3), regs->r3);
+
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
+}
+
+#if 0
+static asmlinkage void syscall_trace(void)
+{
+	if (!test_thread_flag(TIF_SYSCALL_TRACE))
+		return;
+	if (!(current->ptrace & PT_PTRACED))
+		return;
+	/* The 0x80 provides a way for the tracing parent to distinguish
+	 between a syscall stop and SIGTRAP delivery */
+	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+				? 0x80 : 0));
+	/*
+	 * this isn't the same as continuing with a signal, but it will do
+	 * for normal use. strace only continues with a signal if the
+	 * stopping signal is not SIGTRAP. -brl
+	 */
+	if (current->exit_code) {
+		send_sig(current->exit_code, current, 1);
+		current->exit_code = 0;
+	}
+}
+#endif
+
 void ptrace_disable(struct task_struct *child)
 {
 	/* nothing to do */

arch/microblaze/kernel/setup.c

@@ -94,7 +94,7 @@ inline unsigned get_romfs_len(unsigned *addr)
 #endif	/* CONFIG_MTD_UCLINUX_EBSS */
 
 void __init machine_early_init(const char *cmdline, unsigned int ram,
-		unsigned int fdt)
+		unsigned int fdt, unsigned int msr)
 {
 	unsigned long *src, *dst = (unsigned long *)0x0;
 
@@ -157,6 +157,16 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
 #endif
 
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+	if (msr)
+		early_printk("!!!Your kernel has setup MSR instruction but "
+				"CPU don't have it %d\n", msr);
+#else
+	if (!msr)
+		early_printk("!!!Your kernel not setup MSR instruction but "
+				"CPU have it %d\n", msr);
+#endif
+
 	for (src = __ivt_start; src < __ivt_end; src++, dst++)
 		*dst = *src;
 

arch/microblaze/kernel/vmlinux.lds.S

@@ -12,13 +12,16 @@ OUTPUT_FORMAT("elf32-microblaze", "elf32-microblaze", "elf32-microblaze")
 OUTPUT_ARCH(microblaze)
 ENTRY(_start)
 
+#include <asm/page.h>
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
 
 jiffies = jiffies_64 + 4;
 
 SECTIONS {
 	. = CONFIG_KERNEL_START;
-	.text : {
+	_start = CONFIG_KERNEL_BASE_ADDR;
+	.text : AT(ADDR(.text) - LOAD_OFFSET) {
 		_text = . ;
 		_stext = . ;
 		*(.text .text.*)
@@ -33,24 +36,22 @@ SECTIONS {
 	}
 
 	. = ALIGN (4) ;
-	_fdt_start = . ; /* place for fdt blob */
-	. = . + 0x4000;
-	_fdt_end = . ;
+	__fdt_blob : AT(ADDR(__fdt_blob) - LOAD_OFFSET) {
+		_fdt_start = . ;		/* place for fdt blob */
+		*(__fdt_blob) ;			/* Any link-placed DTB */
+	        . = _fdt_start + 0x4000;	/* Pad up to 16kbyte */
+		_fdt_end = . ;
+	}
 
 	. = ALIGN(16);
 	RODATA
-	. = ALIGN(16);
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(16)
 
 	/*
 	 * sdata2 section can go anywhere, but must be word aligned
 	 * and SDA2_BASE must point to the middle of it
 	 */
-	.sdata2 : {
+	.sdata2 : AT(ADDR(.sdata2) - LOAD_OFFSET) {
 		_ssrw = .;
 		. = ALIGN(4096); /* page aligned when MMU used - origin 0x8 */
 		*(.sdata2)
@@ -61,12 +62,7 @@ SECTIONS {
 	}
 
 	_sdata = . ;
-	.data ALIGN (4096) : { /* page aligned when MMU used - origin 0x4 */
-		DATA_DATA
-		CONSTRUCTORS
-	}
-	. = ALIGN(32);
-	.data.cacheline_aligned : { *(.data.cacheline_aligned) }
+	RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
 	_edata = . ;
 
 	/* Reserve some low RAM for r0 based memory references */
@@ -74,18 +70,14 @@ SECTIONS {
 	r0_ram = . ;
 	. = . +  4096;	/* a page should be enough */
 
-	/* The initial task */
-	. = ALIGN(8192);
-	.data.init_task : { *(.data.init_task) }
-
 	/* Under the microblaze ABI, .sdata and .sbss must be contiguous */
 	. = ALIGN(8);
-	.sdata : {
+	.sdata : AT(ADDR(.sdata) - LOAD_OFFSET) {
 		_ssro = .;
 		*(.sdata)
 	}
 
-	.sbss :	{
+	.sbss :	AT(ADDR(.sbss) - LOAD_OFFSET) {
 		_ssbss = .;
 		*(.sbss)
 		_esbss = .;
@@ -96,47 +88,36 @@ SECTIONS {
 
 	__init_begin = .;
 
-	. = ALIGN(4096);
-	.init.text : {
-		_sinittext = . ;
-		INIT_TEXT
-		_einittext = .;
-	}
+	INIT_TEXT_SECTION(PAGE_SIZE)
 
-	.init.data : {
+	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
 		INIT_DATA
 	}
 
 	. = ALIGN(4);
-	.init.ivt : {
+	.init.ivt : AT(ADDR(.init.ivt) - LOAD_OFFSET) {
 		__ivt_start = .;
 		*(.init.ivt)
 		__ivt_end = .;
 	}
 
-	.init.setup : {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
+	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+		INIT_SETUP(0)
 	}
 
-	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
+	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET ) {
+		INIT_CALLS
 	}
 
-	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
+	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+		CON_INITCALL
 	}
 
 	SECURITY_INIT
 
 	__init_end_before_initramfs = .;
 
-	.init.ramfs ALIGN(4096) : {
+	.init.ramfs ALIGN(4096) : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
 		__initramfs_start = .;
 		*(.init.ramfs)
 		__initramfs_end = .;
@@ -152,7 +133,8 @@ SECTIONS {
 	}
 	__init_end = .;
 
-	.bss ALIGN (4096) : { /* page aligned when MMU used */
+	.bss ALIGN (4096) : AT(ADDR(.bss) - LOAD_OFFSET) {
+		/* page aligned when MMU used */
 		__bss_start = . ;
 			*(.bss*)
 			*(COMMON)

arch/microblaze/mm/init.c

@@ -180,7 +180,8 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 		totalram_pages++;
 		pages++;
 	}
-	printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages);
+	printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n",
+					(int)(pages * (PAGE_SIZE / 1024)));
 }
 #endif
 

drivers/mtd/Kconfig

@@ -159,7 +159,7 @@ config MTD_AFS_PARTS
 
 config MTD_OF_PARTS
 	tristate "Flash partition map based on OF description"
-	depends on PPC_OF && MTD_PARTITIONS
+	depends on (MICROBLAZE || PPC_OF) && MTD_PARTITIONS
 	help
 	  This provides a partition parsing function which derives
 	  the partition map from the children of the flash node,

drivers/mtd/maps/Kconfig

@@ -74,7 +74,7 @@ config MTD_PHYSMAP_BANKWIDTH
 
 config MTD_PHYSMAP_OF
 	tristate "Flash device in physical memory map based on OF description"
-	depends on PPC_OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM)
+	depends on (MICROBLAZE || PPC_OF) && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM)
 	help
 	  This provides a 'mapping' driver which allows the NOR Flash and
 	  ROM driver code to communicate with chips which are mapped

drivers/usb/Kconfig

@@ -22,7 +22,6 @@ config USB_ARCH_HAS_HCD
 	default y if PCMCIA && !M32R			# sl811_cs
 	default y if ARM				# SL-811
 	default y if SUPERH				# r8a66597-hcd
-	default y if MICROBLAZE
 	default PCI
 
 # many non-PCI SOC chips embed OHCI

kernel/gcov/Kconfig

@@ -34,7 +34,7 @@ config GCOV_KERNEL
 config GCOV_PROFILE_ALL
 	bool "Profile entire Kernel"
 	depends on GCOV_KERNEL
-	depends on S390 || X86 || (PPC && EXPERIMENTAL)
+	depends on S390 || X86 || (PPC && EXPERIMENTAL) || MICROBLAZE
 	default n
 	---help---
 	This options activates profiling for the entire kernel.