Merge tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc power management changes from Arnd Bergmann:
 "These are various power management related changes, mainly concerning
  cpuidle on i.MX and OMAP, as well as a the move of the omap
  smartreflex driver to live in the power subsystem."

Fix up conflicts in arch/arm/mach-{imx/mach-imx6q.c,omap2/prm2xxx_3xxx.h}

* tag 'pm' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
  ARM: OMAP2+: PM: fix IRQ_NOAUTOEN removal by mis-merge
  ARM: OMAP2+: do not allow SmartReflex to be built as a module
  ARM: OMAP2: Use hwmod to initialize mmc for 2420
  ARM: OMAP3: PM: cpuidle: optimize the clkdm idle latency in C1 state
  ARM: OMAP3: PM: cpuidle: optimize the PER latency in C1 state
  ARM: OMAP3: PM: cpuidle: default to C1 in next_valid_state
  ARM: OMAP3: PM: cleanup cam_pwrdm leftovers
  ARM: OMAP3: PM: call pre/post transition per powerdomain
  ARM: OMAP2+: powerdomain: allow pre/post transtion to be per pwrdm
  ARM: OMAP3: PM: Remove IO Daisychain control from cpuidle
  ARM: OMAP3PLUS: hwmod: reconfigure IO Daisychain during hwmod mux
  ARM: OMAP3+: PRM: Enable IO wake up
  ARM: OMAP4: PRM: Add IO Daisychain support
  ARM: OMAP3: PM: Move IO Daisychain function to omap3 prm file
  ARM: OMAP3: PM: correct enable/disable of daisy io chain
  ARM: OMAP2+: PRM: fix compile for OMAP4-only build
  W1: OMAP HDQ1W: use runtime PM
  ARM: OMAP2+: HDQ1W: use omap_device
  W1: OMAP HDQ1W: use 32-bit register accesses
  W1: OMAP HDQ1W: allow driver to be built on all OMAP2+
  ...

arch/arm/mach-imx/clk-imx51-imx53.c

@@ -279,6 +279,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[dummy], NULL, "imx-keypad");
 	clk_register_clkdev(clk[tve_gate], NULL, "imx-tve.0");
 	clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0");
+	clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
 
 	/* Set SDHC parents to be PLL2 */
 	clk_set_parent(clk[esdhc_a_sel], clk[pll2_sw]);
@@ -336,7 +337,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
 	clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL);
 	clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0");
 	clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
-	clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
 	clk_register_clkdev(clk[ipu_gate], "bus", "imx51-ipu");
 	clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx51-ipu");
 	clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx51-ipu");

arch/arm/mach-imx/imx53-dt.c

@@ -120,6 +120,7 @@ DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
 	.handle_irq	= imx53_handle_irq,
 	.timer		= &imx53_timer,
 	.init_machine	= imx53_dt_init,
+	.init_late	= imx53_init_late,
 	.dt_compat	= imx53_dt_board_compat,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-imx6q.c

@@ -12,7 +12,9 @@
 
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/cpuidle.h>
 #include <linux/delay.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irq.h>
@@ -24,6 +26,7 @@
 #include <linux/phy.h>
 #include <linux/micrel_phy.h>
 #include <linux/mfd/anatop.h>
+#include <asm/cpuidle.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
@@ -31,8 +34,10 @@
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
 #include <mach/common.h>
+#include <mach/cpuidle.h>
 #include <mach/hardware.h>
 
+
 void imx6q_restart(char mode, const char *cmd)
 {
 	struct device_node *np;
@@ -169,6 +174,19 @@ static void __init imx6q_init_machine(void)
 	imx6q_usb_init();
 }
 
+static struct cpuidle_driver imx6q_cpuidle_driver = {
+	.name			= "imx6q_cpuidle",
+	.owner			= THIS_MODULE,
+	.en_core_tk_irqen	= 1,
+	.states[0]		= ARM_CPUIDLE_WFI_STATE,
+	.state_count		= 1,
+};
+
+static void __init imx6q_init_late(void)
+{
+	imx_cpuidle_init(&imx6q_cpuidle_driver);
+}
+
 static void __init imx6q_map_io(void)
 {
 	imx_lluart_map_io();
@@ -213,6 +231,7 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
 	.handle_irq	= imx6q_handle_irq,
 	.timer		= &imx6q_timer,
 	.init_machine	= imx6q_init_machine,
+	.init_late      = imx6q_init_late,
 	.dt_compat	= imx6q_dt_compat,
 	.restart	= imx6q_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx53_ard.c

@@ -267,5 +267,6 @@ MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board")
 	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_ard_timer,
 	.init_machine = mx53_ard_board_init,
+	.init_late	= imx53_init_late,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx53_evk.c

@@ -174,5 +174,6 @@ MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board")
 	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_evk_timer,
 	.init_machine = mx53_evk_board_init,
+	.init_late	= imx53_init_late,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx53_loco.c

@@ -316,5 +316,6 @@ MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board")
 	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_loco_timer,
 	.init_machine = mx53_loco_board_init,
+	.init_late	= imx53_init_late,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mach-mx53_smd.c

@@ -163,5 +163,6 @@ MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board")
 	.handle_irq = imx53_handle_irq,
 	.timer = &mx53_smd_timer,
 	.init_machine = mx53_smd_board_init,
+	.init_late	= imx53_init_late,
 	.restart	= mxc_restart,
 MACHINE_END

arch/arm/mach-imx/mm-imx5.c

@@ -16,7 +16,6 @@
 #include <linux/clk.h>
 #include <linux/pinctrl/machine.h>
 
-#include <asm/system_misc.h>
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
@@ -24,24 +23,6 @@
 #include <mach/devices-common.h>
 #include <mach/iomux-v3.h>
 
-static struct clk *gpc_dvfs_clk;
-
-static void imx5_idle(void)
-{
-	/* gpc clock is needed for SRPG */
-	if (gpc_dvfs_clk == NULL) {
-		gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
-		if (IS_ERR(gpc_dvfs_clk))
-			return;
-		clk_prepare(gpc_dvfs_clk);
-	}
-	clk_enable(gpc_dvfs_clk);
-	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-	if (!tzic_enable_wake())
-		cpu_do_idle();
-	clk_disable(gpc_dvfs_clk);
-}
-
 /*
  * Define the MX50 memory map.
  */
@@ -105,7 +86,6 @@ void __init imx51_init_early(void)
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-	arm_pm_idle = imx5_idle;
 }
 
 void __init imx53_init_early(void)
@@ -243,4 +223,10 @@ void __init imx53_soc_init(void)
 void __init imx51_init_late(void)
 {
 	mx51_neon_fixup();
+	imx51_pm_init();
+}
+
+void __init imx53_init_late(void)
+{
+	imx53_pm_init();
 }

arch/arm/mach-imx/pm-imx5.c

@@ -12,19 +12,30 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/err.h>
+#include <linux/export.h>
 #include <asm/cacheflush.h>
+#include <asm/system_misc.h>
 #include <asm/tlbflush.h>
 #include <mach/common.h>
+#include <mach/cpuidle.h>
 #include <mach/hardware.h>
 #include "crm-regs-imx5.h"
 
-static struct clk *gpc_dvfs_clk;
+/*
+ * The WAIT_UNCLOCKED_POWER_OFF state only requires <= 500ns to exit.
+ * This is also the lowest power state possible without affecting
+ * non-cpu parts of the system.  For these reasons, imx5 should default
+ * to always using this state for cpu idling.  The PM_SUSPEND_STANDBY also
+ * uses this state and needs to take no action when registers remain confgiured
+ * for this state.
+ */
+#define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF
 
 /*
  * set cpu low power mode before WFI instruction. This function is called
  * mx5 because it can be used for mx50, mx51, and mx53.
  */
-void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
+static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
 {
 	u32 plat_lpc, arm_srpgcr, ccm_clpcr;
 	u32 empgc0, empgc1;
@@ -87,11 +98,6 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
 	}
 }
 
-static int mx5_suspend_prepare(void)
-{
-	return clk_prepare_enable(gpc_dvfs_clk);
-}
-
 static int mx5_suspend_enter(suspend_state_t state)
 {
 	switch (state) {
@@ -99,7 +105,7 @@ static int mx5_suspend_enter(suspend_state_t state)
 		mx5_cpu_lp_set(STOP_POWER_OFF);
 		break;
 	case PM_SUSPEND_STANDBY:
-		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+		/* DEFAULT_IDLE_STATE already configured */
 		break;
 	default:
 		return -EINVAL;
@@ -114,12 +120,10 @@ static int mx5_suspend_enter(suspend_state_t state)
 		__raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
 	}
 	cpu_do_idle();
-	return 0;
-}
 
-static void mx5_suspend_finish(void)
-{
-	clk_disable_unprepare(gpc_dvfs_clk);
+	/* return registers to default idle state */
+	mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
+	return 0;
 }
 
 static int mx5_pm_valid(suspend_state_t state)
@@ -129,25 +133,80 @@ static int mx5_pm_valid(suspend_state_t state)
 
 static const struct platform_suspend_ops mx5_suspend_ops = {
 	.valid = mx5_pm_valid,
-	.prepare = mx5_suspend_prepare,
 	.enter = mx5_suspend_enter,
-	.finish = mx5_suspend_finish,
 };
 
-static int __init mx5_pm_init(void)
+static inline int imx5_cpu_do_idle(void)
+{
+	int ret = tzic_enable_wake();
+
+	if (likely(!ret))
+		cpu_do_idle();
+
+	return ret;
+}
+
+static void imx5_pm_idle(void)
+{
+	imx5_cpu_do_idle();
+}
+
+static int imx5_cpuidle_enter(struct cpuidle_device *dev,
+				struct cpuidle_driver *drv, int idx)
+{
+	int ret;
+
+	ret = imx5_cpu_do_idle();
+	if (ret < 0)
+		return ret;
+
+	return idx;
+}
+
+static struct cpuidle_driver imx5_cpuidle_driver = {
+	.name			= "imx5_cpuidle",
+	.owner			= THIS_MODULE,
+	.en_core_tk_irqen	= 1,
+	.states[0]	= {
+		.enter			= imx5_cpuidle_enter,
+		.exit_latency		= 2,
+		.target_residency	= 1,
+		.flags			= CPUIDLE_FLAG_TIME_VALID,
+		.name			= "IMX5 SRPG",
+		.desc			= "CPU state retained,powered off",
+	},
+	.state_count		= 1,
+};
+
+static int __init imx5_pm_common_init(void)
 {
-	if (!cpu_is_mx51() && !cpu_is_mx53())
-		return 0;
+	int ret;
+	struct clk *gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
 
-	if (gpc_dvfs_clk == NULL)
-		gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+	if (IS_ERR(gpc_dvfs_clk))
+		return PTR_ERR(gpc_dvfs_clk);
 
-	if (!IS_ERR(gpc_dvfs_clk)) {
-		if (cpu_is_mx51())
-			suspend_set_ops(&mx5_suspend_ops);
-	} else
-		return -EPERM;
+	ret = clk_prepare_enable(gpc_dvfs_clk);
+	if (ret)
+		return ret;
 
+	arm_pm_idle = imx5_pm_idle;
+
+	/* Set the registers to the default cpu idle state. */
+	mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
+
+	imx_cpuidle_init(&imx5_cpuidle_driver);
 	return 0;
 }
-device_initcall(mx5_pm_init);
+
+void __init imx51_pm_init(void)
+{
+	int ret = imx5_pm_common_init();
+	if (!ret)
+		suspend_set_ops(&mx5_suspend_ops);
+}
+
+void __init imx53_pm_init(void)
+{
+	imx5_pm_common_init();
+}

arch/arm/mach-omap2/Makefile

@@ -74,8 +74,9 @@ obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
 obj-$(CONFIG_ARCH_OMAP4)		+= pm44xx.o omap-mpuss-lowpower.o
 obj-$(CONFIG_SOC_OMAP5)			+= omap-mpuss-lowpower.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
-obj-$(CONFIG_OMAP_SMARTREFLEX)          += sr_device.o smartreflex.o
-obj-$(CONFIG_OMAP_SMARTREFLEX_CLASS3)	+= smartreflex-class3.o
+
+obj-$(CONFIG_POWER_AVS_OMAP)		+= sr_device.o
+obj-$(CONFIG_POWER_AVS_OMAP_CLASS3)    += smartreflex-class3.o
 
 AFLAGS_sleep24xx.o			:=-Wa,-march=armv6
 AFLAGS_sleep34xx.o			:=-Wa,-march=armv7-a$(plus_sec)

arch/arm/mach-omap2/cpuidle34xx.c

@@ -75,20 +75,6 @@ static struct omap3_idle_statedata omap3_idle_data[] = {
 
 static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
 
-static int _cpuidle_allow_idle(struct powerdomain *pwrdm,
-				struct clockdomain *clkdm)
-{
-	clkdm_allow_idle(clkdm);
-	return 0;
-}
-
-static int _cpuidle_deny_idle(struct powerdomain *pwrdm,
-				struct clockdomain *clkdm)
-{
-	clkdm_deny_idle(clkdm);
-	return 0;
-}
-
 static int __omap3_enter_idle(struct cpuidle_device *dev,
 				struct cpuidle_driver *drv,
 				int index)
@@ -106,8 +92,8 @@ static int __omap3_enter_idle(struct cpuidle_device *dev,
 
 	/* Deny idle for C1 */
 	if (index == 0) {
-		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
-		pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
+		clkdm_deny_idle(mpu_pd->pwrdm_clkdms[0]);
+		clkdm_deny_idle(core_pd->pwrdm_clkdms[0]);
 	}
 
 	/*
@@ -129,8 +115,8 @@ static int __omap3_enter_idle(struct cpuidle_device *dev,
 
 	/* Re-allow idle for C1 */
 	if (index == 0) {
-		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
-		pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
+		clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]);
+		clkdm_allow_idle(core_pd->pwrdm_clkdms[0]);
 	}
 
 return_sleep_time:
@@ -176,7 +162,7 @@ static int next_valid_state(struct cpuidle_device *dev,
 	u32 mpu_deepest_state = PWRDM_POWER_RET;
 	u32 core_deepest_state = PWRDM_POWER_RET;
 	int idx;
-	int next_index = -1;
+	int next_index = 0; /* C1 is the default value */
 
 	if (enable_off_mode) {
 		mpu_deepest_state = PWRDM_POWER_OFF;
@@ -207,12 +193,6 @@ static int next_valid_state(struct cpuidle_device *dev,
 		}
 	}
 
-	/*
-	 * C1 is always valid.
-	 * So, no need to check for 'next_index == -1' outside
-	 * this loop.
-	 */
-
 	return next_index;
 }
 
@@ -226,23 +206,22 @@ static int next_valid_state(struct cpuidle_device *dev,
  * the device to the specified or a safer state.
  */
 static int omap3_enter_idle_bm(struct cpuidle_device *dev,
-				struct cpuidle_driver *drv,
+			       struct cpuidle_driver *drv,
 			       int index)
 {
 	int new_state_idx;
-	u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state;
+	u32 core_next_state, per_next_state = 0, per_saved_state = 0;
 	struct omap3_idle_statedata *cx;
 	int ret;
 
 	/*
-	 * Prevent idle completely if CAM is active.
+	 * Use only C1 if CAM is active.
 	 * CAM does not have wakeup capability in OMAP3.
 	 */
-	cam_state = pwrdm_read_pwrst(cam_pd);
-	if (cam_state == PWRDM_POWER_ON) {
+	if (pwrdm_read_pwrst(cam_pd) == PWRDM_POWER_ON)
 		new_state_idx = drv->safe_state_index;
-		goto select_state;
-	}
+	else
+		new_state_idx = next_valid_state(dev, drv, index);
 
 	/*
 	 * FIXME: we currently manage device-specific idle states
@@ -252,24 +231,28 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 	 *        its own code.
 	 */
 
-	/*
-	 * Prevent PER off if CORE is not in retention or off as this
-	 * would disable PER wakeups completely.
-	 */
-	cx = &omap3_idle_data[index];
+	/* Program PER state */
+	cx = &omap3_idle_data[new_state_idx];
 	core_next_state = cx->core_state;
 	per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd);
-	if ((per_next_state == PWRDM_POWER_OFF) &&
-	    (core_next_state > PWRDM_POWER_RET))
-		per_next_state = PWRDM_POWER_RET;
+	if (new_state_idx == 0) {
+		/* In C1 do not allow PER state lower than CORE state */
+		if (per_next_state < core_next_state)
+			per_next_state = core_next_state;
+	} else {
+		/*
+		 * Prevent PER OFF if CORE is not in RETention or OFF as this
+		 * would disable PER wakeups completely.
+		 */
+		if ((per_next_state == PWRDM_POWER_OFF) &&
+		    (core_next_state > PWRDM_POWER_RET))
+			per_next_state = PWRDM_POWER_RET;
+	}
 
 	/* Are we changing PER target state? */
 	if (per_next_state != per_saved_state)
 		pwrdm_set_next_pwrst(per_pd, per_next_state);
 
-	new_state_idx = next_valid_state(dev, drv, index);
-
-select_state:
 	ret = omap3_enter_idle(dev, drv, new_state_idx);
 
 	/* Restore original PER state if it was modified */
@@ -286,7 +269,7 @@ struct cpuidle_driver omap3_idle_driver = {
 	.owner = 	THIS_MODULE,
 	.states = {
 		{
-			.enter		  = omap3_enter_idle,
+			.enter		  = omap3_enter_idle_bm,
 			.exit_latency	  = 2 + 2,
 			.target_residency = 5,
 			.flags		  = CPUIDLE_FLAG_TIME_VALID,

arch/arm/mach-omap2/devices.c

@@ -27,7 +27,6 @@
 
 #include "iomap.h"
 #include <plat/board.h>
-#include <plat/mmc.h>
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
@@ -603,112 +602,6 @@ static inline void omap_init_aes(void) { }
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-
-static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
-							*mmc_controller)
-{
-	if ((mmc_controller->slots[0].switch_pin > 0) && \
-		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
-					OMAP_PIN_INPUT_PULLUP);
-	if ((mmc_controller->slots[0].gpio_wp > 0) && \
-		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
-		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
-					OMAP_PIN_INPUT_PULLUP);
-
-	omap_mux_init_signal("sdmmc_cmd", 0);
-	omap_mux_init_signal("sdmmc_clki", 0);
-	omap_mux_init_signal("sdmmc_clko", 0);
-	omap_mux_init_signal("sdmmc_dat0", 0);
-	omap_mux_init_signal("sdmmc_dat_dir0", 0);
-	omap_mux_init_signal("sdmmc_cmd_dir", 0);
-	if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
-		omap_mux_init_signal("sdmmc_dat1", 0);
-		omap_mux_init_signal("sdmmc_dat2", 0);
-		omap_mux_init_signal("sdmmc_dat3", 0);
-		omap_mux_init_signal("sdmmc_dat_dir1", 0);
-		omap_mux_init_signal("sdmmc_dat_dir2", 0);
-		omap_mux_init_signal("sdmmc_dat_dir3", 0);
-	}
-
-	/*
-	 * Use internal loop-back in MMC/SDIO Module Input Clock
-	 * selection
-	 */
-	if (mmc_controller->slots[0].internal_clock) {
-		u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-		v |= (1 << 24);
-		omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
-	}
-}
-
-void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-	struct platform_device *pdev;
-	struct omap_hwmod *oh;
-	int id = 0;
-	char *oh_name = "msdi1";
-	char *dev_name = "mmci-omap";
-
-	if (!mmc_data[0]) {
-		pr_err("%s fails: Incomplete platform data\n", __func__);
-		return;
-	}
-
-	omap242x_mmc_mux(mmc_data[0]);
-
-	oh = omap_hwmod_lookup(oh_name);
-	if (!oh) {
-		pr_err("Could not look up %s\n", oh_name);
-		return;
-	}
-	pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
-				 sizeof(struct omap_mmc_platform_data), NULL, 0, 0);
-	if (IS_ERR(pdev))
-		WARN(1, "Can'd build omap_device for %s:%s.\n",
-					dev_name, oh->name);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
-#define OMAP_HDQ_BASE	0x480B2000
-static struct resource omap_hdq_resources[] = {
-	{
-		.start		= OMAP_HDQ_BASE,
-		.end		= OMAP_HDQ_BASE + 0x1C,
-		.flags		= IORESOURCE_MEM,
-	},
-	{
-		.start		= INT_24XX_HDQ_IRQ,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-static struct platform_device omap_hdq_dev = {
-	.name = "omap_hdq",
-	.id = 0,
-	.dev = {
-		.platform_data = NULL,
-	},
-	.num_resources	= ARRAY_SIZE(omap_hdq_resources),
-	.resource	= omap_hdq_resources,
-};
-static inline void omap_hdq_init(void)
-{
-	if (cpu_is_omap2420())
-		return;
-
-	platform_device_register(&omap_hdq_dev);
-}
-#else
-static inline void omap_hdq_init(void) {}
-#endif
-
-/*---------------------------------------------------------------------------*/
-
 #if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
 	defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
 #if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
@@ -753,7 +646,6 @@ static int __init omap2_init_devices(void)
 		omap_init_mcspi();
 	}
 	omap_init_pmu();
-	omap_hdq_init();
 	omap_init_sti();
 	omap_init_sham();
 	omap_init_aes();

arch/arm/mach-omap2/hdq1w.c

@@ -22,7 +22,13 @@
  * 02110-1301 USA
  */
 
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
 #include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
 #include <plat/hdq1w.h>
 
 #include "common.h"
@@ -70,3 +76,23 @@ int omap_hdq1w_reset(struct omap_hwmod *oh)
 
 	return 0;
 }
+
+static int __init omap_init_hdq(void)
+{
+	int id = -1;
+	struct platform_device *pdev;
+	struct omap_hwmod *oh;
+	char *oh_name = "hdq1w";
+	char *devname = "omap_hdq";
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh)
+		return 0;
+
+	pdev = omap_device_build(devname, id, oh, NULL, 0, NULL, 0, 0);
+	WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s.\n",
+	     devname, oh->name);
+
+	return 0;
+}
+arch_initcall(omap_init_hdq);

arch/arm/mach-omap2/msdi.c

@@ -22,11 +22,15 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/err.h>
 
 #include <plat/omap_hwmod.h>
+#include <plat/omap_device.h>
 #include <plat/mmc.h>
 
 #include "common.h"
+#include "control.h"
+#include "mux.h"
 
 /*
  * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register
@@ -86,3 +90,72 @@ int omap_msdi_reset(struct omap_hwmod *oh)
 
 	return 0;
 }
+
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+
+static inline void omap242x_mmc_mux(struct omap_mmc_platform_data
+				    *mmc_controller)
+{
+	if ((mmc_controller->slots[0].switch_pin > 0) && \
+		(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
+					OMAP_PIN_INPUT_PULLUP);
+	if ((mmc_controller->slots[0].gpio_wp > 0) && \
+		(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
+		omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
+					OMAP_PIN_INPUT_PULLUP);
+
+	omap_mux_init_signal("sdmmc_cmd", 0);
+	omap_mux_init_signal("sdmmc_clki", 0);
+	omap_mux_init_signal("sdmmc_clko", 0);
+	omap_mux_init_signal("sdmmc_dat0", 0);
+	omap_mux_init_signal("sdmmc_dat_dir0", 0);
+	omap_mux_init_signal("sdmmc_cmd_dir", 0);
+	if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
+		omap_mux_init_signal("sdmmc_dat1", 0);
+		omap_mux_init_signal("sdmmc_dat2", 0);
+		omap_mux_init_signal("sdmmc_dat3", 0);
+		omap_mux_init_signal("sdmmc_dat_dir1", 0);
+		omap_mux_init_signal("sdmmc_dat_dir2", 0);
+		omap_mux_init_signal("sdmmc_dat_dir3", 0);
+	}
+
+	/*
+	 * Use internal loop-back in MMC/SDIO Module Input Clock
+	 * selection
+	 */
+	if (mmc_controller->slots[0].internal_clock) {
+		u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+		v |= (1 << 24);
+		omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
+	}
+}
+
+void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
+{
+	struct platform_device *pdev;
+	struct omap_hwmod *oh;
+	int id = 0;
+	char *oh_name = "msdi1";
+	char *dev_name = "mmci-omap";
+
+	if (!mmc_data[0]) {
+		pr_err("%s fails: Incomplete platform data\n", __func__);
+		return;
+	}
+
+	omap242x_mmc_mux(mmc_data[0]);
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("Could not look up %s\n", oh_name);
+		return;
+	}
+	pdev = omap_device_build(dev_name, id, oh, mmc_data[0],
+				 sizeof(struct omap_mmc_platform_data), NULL, 0, 0);
+	if (IS_ERR(pdev))
+		WARN(1, "Can'd build omap_device for %s:%s.\n",
+					dev_name, oh->name);
+}
+
+#endif

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -255,7 +255,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 		return -ENXIO;
 	}
 
-	pwrdm_pre_transition();
+	pwrdm_pre_transition(NULL);
 
 	/*
 	 * Check MPUSS next state and save interrupt controller if needed.
@@ -287,7 +287,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
 	wakeup_cpu = smp_processor_id();
 	set_cpu_next_pwrst(wakeup_cpu, PWRDM_POWER_ON);
 
-	pwrdm_post_transition();
+	pwrdm_post_transition(NULL);
 
 	return 0;
 }

arch/arm/mach-omap2/omap_hwmod.c

@@ -153,6 +153,7 @@
 #include "prm44xx.h"
 #include "prminst44xx.h"
 #include "mux.h"
+#include "pm.h"
 
 /* Maximum microseconds to wait for OMAP module to softreset */
 #define MAX_MODULE_SOFTRESET_WAIT	10000
@@ -197,6 +198,9 @@ static LIST_HEAD(omap_hwmod_list);
 /* mpu_oh: used to add/remove MPU initiator from sleepdep list */
 static struct omap_hwmod *mpu_oh;
 
+/* io_chain_lock: used to serialize reconfigurations of the I/O chain */
+static DEFINE_SPINLOCK(io_chain_lock);
+
 /*
  * linkspace: ptr to a buffer that struct omap_hwmod_link records are
  * allocated from - used to reduce the number of small memory
@@ -1758,6 +1762,32 @@ static int _reset(struct omap_hwmod *oh)
 	return r;
 }
 
+/**
+ * _reconfigure_io_chain - clear any I/O chain wakeups and reconfigure chain
+ *
+ * Call the appropriate PRM function to clear any logged I/O chain
+ * wakeups and to reconfigure the chain.  This apparently needs to be
+ * done upon every mux change.  Since hwmods can be concurrently
+ * enabled and idled, hold a spinlock around the I/O chain
+ * reconfiguration sequence.  No return value.
+ *
+ * XXX When the PRM code is moved to drivers, this function can be removed,
+ * as the PRM infrastructure should abstract this.
+ */
+static void _reconfigure_io_chain(void)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&io_chain_lock, flags);
+
+	if (cpu_is_omap34xx() && omap3_has_io_chain_ctrl())
+		omap3xxx_prm_reconfigure_io_chain();
+	else if (cpu_is_omap44xx())
+		omap44xx_prm_reconfigure_io_chain();
+
+	spin_unlock_irqrestore(&io_chain_lock, flags);
+}
+
 /**
  * _enable - enable an omap_hwmod
  * @oh: struct omap_hwmod *
@@ -1814,8 +1844,10 @@ static int _enable(struct omap_hwmod *oh)
 	/* Mux pins for device runtime if populated */
 	if (oh->mux && (!oh->mux->enabled ||
 			((oh->_state == _HWMOD_STATE_IDLE) &&
-			 oh->mux->pads_dynamic)))
+			 oh->mux->pads_dynamic))) {
 		omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
+		_reconfigure_io_chain();
+	}
 
 	_add_initiator_dep(oh, mpu_oh);
 
@@ -1907,8 +1939,10 @@ static int _idle(struct omap_hwmod *oh)
 		clkdm_hwmod_disable(oh->clkdm, oh);
 
 	/* Mux pins for device idle if populated */
-	if (oh->mux && oh->mux->pads_dynamic)
+	if (oh->mux && oh->mux->pads_dynamic) {
 		omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
+		_reconfigure_io_chain();
+	}
 
 	oh->_state = _HWMOD_STATE_IDLE;
 

arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

@@ -14,6 +14,8 @@
  *
  * XXX these should be marked initdata for multi-OMAP kernels
  */
+#include <linux/power/smartreflex.h>
+
 #include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
 #include <plat/cpu.h>
@@ -29,8 +31,6 @@
 #include <plat/dmtimer.h>
 
 #include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
 #include "prm-regbits-34xx.h"
 #include "cm-regbits-34xx.h"
 #include "wd_timer.h"
@@ -1357,7 +1357,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
 };
 
 static struct omap_hwmod omap34xx_sr1_hwmod = {
-	.name		= "sr1",
+	.name		= "smartreflex_mpu_iva",
 	.class		= &omap34xx_smartreflex_hwmod_class,
 	.main_clk	= "sr1_fck",
 	.prcm		= {
@@ -1375,7 +1375,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
 };
 
 static struct omap_hwmod omap36xx_sr1_hwmod = {
-	.name		= "sr1",
+	.name		= "smartreflex_mpu_iva",
 	.class		= &omap36xx_smartreflex_hwmod_class,
 	.main_clk	= "sr1_fck",
 	.prcm		= {
@@ -1402,7 +1402,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
 };
 
 static struct omap_hwmod omap34xx_sr2_hwmod = {
-	.name		= "sr2",
+	.name		= "smartreflex_core",
 	.class		= &omap34xx_smartreflex_hwmod_class,
 	.main_clk	= "sr2_fck",
 	.prcm		= {
@@ -1420,7 +1420,7 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
 };
 
 static struct omap_hwmod omap36xx_sr2_hwmod = {
-	.name		= "sr2",
+	.name		= "smartreflex_core",
 	.class		= &omap36xx_smartreflex_hwmod_class,
 	.main_clk	= "sr2_fck",
 	.prcm		= {

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -19,6 +19,7 @@
  */
 
 #include <linux/io.h>
+#include <linux/power/smartreflex.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/cpu.h>
@@ -32,8 +33,6 @@
 #include <plat/common.h>
 
 #include "omap_hwmod_common_data.h"
-
-#include "smartreflex.h"
 #include "cm1_44xx.h"
 #include "cm2_44xx.h"
 #include "prm44xx.h"

arch/arm/mach-omap2/pm.h

@@ -101,7 +101,7 @@ extern void enable_omap3630_toggle_l2_on_restore(void);
 static inline void enable_omap3630_toggle_l2_on_restore(void) { }
 #endif		/* defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3) */
 
-#ifdef CONFIG_OMAP_SMARTREFLEX
+#ifdef CONFIG_POWER_AVS_OMAP
 extern int omap_devinit_smartreflex(void);
 extern void omap_enable_smartreflex_on_init(void);
 #else

arch/arm/mach-omap2/pm34xx.c

@@ -70,34 +70,6 @@ void (*omap3_do_wfi_sram)(void);
 
 static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
 static struct powerdomain *core_pwrdm, *per_pwrdm;
-static struct powerdomain *cam_pwrdm;
-
-static void omap3_enable_io_chain(void)
-{
-	int timeout = 0;
-
-	omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
-				   PM_WKEN);
-	/* Do a readback to assure write has been done */
-	omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN);
-
-	while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) &
-		 OMAP3430_ST_IO_CHAIN_MASK)) {
-		timeout++;
-		if (timeout > 1000) {
-			pr_err("Wake up daisy chain activation failed.\n");
-			return;
-		}
-		omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK,
-					   WKUP_MOD, PM_WKEN);
-	}
-}
-
-static void omap3_disable_io_chain(void)
-{
-	omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
-				     PM_WKEN);
-}
 
 static void omap3_core_save_context(void)
 {
@@ -299,24 +271,22 @@ void omap_sram_idle(void)
 	/* Enable IO-PAD and IO-CHAIN wakeups */
 	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
-	if (omap3_has_io_wakeup() &&
-	    (per_next_state < PWRDM_POWER_ON ||
-	     core_next_state < PWRDM_POWER_ON)) {
-		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN);
-		if (omap3_has_io_chain_ctrl())
-			omap3_enable_io_chain();
-	}
 
-	pwrdm_pre_transition();
+	if (mpu_next_state < PWRDM_POWER_ON) {
+		pwrdm_pre_transition(mpu_pwrdm);
+		pwrdm_pre_transition(neon_pwrdm);
+	}
 
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
+		pwrdm_pre_transition(per_pwrdm);
 		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
 		omap2_gpio_prepare_for_idle(per_going_off);
 	}
 
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
+		pwrdm_pre_transition(core_pwrdm);
 		if (core_next_state == PWRDM_POWER_OFF) {
 			omap3_core_save_context();
 			omap3_cm_save_context();
@@ -369,26 +339,20 @@ void omap_sram_idle(void)
 			omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
 					       OMAP3430_GR_MOD,
 					       OMAP3_PRM_VOLTCTRL_OFFSET);
+		pwrdm_post_transition(core_pwrdm);
 	}
 	omap3_intc_resume_idle();
 
-	pwrdm_post_transition();
-
 	/* PER */
-	if (per_next_state < PWRDM_POWER_ON)
+	if (per_next_state < PWRDM_POWER_ON) {
 		omap2_gpio_resume_after_idle();
-
-	/* Disable IO-PAD and IO-CHAIN wakeup */
-	if (omap3_has_io_wakeup() &&
-	    (per_next_state < PWRDM_POWER_ON ||
-	     core_next_state < PWRDM_POWER_ON)) {
-		omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
-					     PM_WKEN);
-		if (omap3_has_io_chain_ctrl())
-			omap3_disable_io_chain();
+		pwrdm_post_transition(per_pwrdm);
 	}
 
-	clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
+	if (mpu_next_state < PWRDM_POWER_ON) {
+		pwrdm_post_transition(mpu_pwrdm);
+		pwrdm_post_transition(neon_pwrdm);
+	}
 }
 
 static void omap3_pm_idle(void)
@@ -754,7 +718,6 @@ int __init omap3_pm_init(void)
 	neon_pwrdm = pwrdm_lookup("neon_pwrdm");
 	per_pwrdm = pwrdm_lookup("per_pwrdm");
 	core_pwrdm = pwrdm_lookup("core_pwrdm");
-	cam_pwrdm = pwrdm_lookup("cam_pwrdm");
 
 	neon_clkdm = clkdm_lookup("neon_clkdm");
 	mpu_clkdm = clkdm_lookup("mpu_clkdm");

arch/arm/mach-omap2/powerdomain.c

@@ -985,15 +985,23 @@ int pwrdm_state_switch(struct powerdomain *pwrdm)
 	return ret;
 }
 
-int pwrdm_pre_transition(void)
+int pwrdm_pre_transition(struct powerdomain *pwrdm)
 {
-	pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
+	if (pwrdm)
+		_pwrdm_pre_transition_cb(pwrdm, NULL);
+	else
+		pwrdm_for_each(_pwrdm_pre_transition_cb, NULL);
+
 	return 0;
 }
 
-int pwrdm_post_transition(void)
+int pwrdm_post_transition(struct powerdomain *pwrdm)
 {
-	pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
+	if (pwrdm)
+		_pwrdm_post_transition_cb(pwrdm, NULL);
+	else
+		pwrdm_for_each(_pwrdm_post_transition_cb, NULL);
+
 	return 0;
 }
 

arch/arm/mach-omap2/powerdomain.h

@@ -230,8 +230,8 @@ bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
 int pwrdm_wait_transition(struct powerdomain *pwrdm);
 
 int pwrdm_state_switch(struct powerdomain *pwrdm);
-int pwrdm_pre_transition(void);
-int pwrdm_post_transition(void);
+int pwrdm_pre_transition(struct powerdomain *pwrdm);
+int pwrdm_post_transition(struct powerdomain *pwrdm);
 int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm);
 int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
 bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);

arch/arm/mach-omap2/prcm-common.h

@@ -410,6 +410,14 @@
  */
 #define MAX_MODULE_HARDRESET_WAIT		10000
 
+/*
+ * Maximum time(us) it takes to output the signal WUCLKOUT of the last
+ * pad of the I/O ring after asserting WUCLKIN high.  Tero measured
+ * the actual time at 7 to 8 microseconds on OMAP3 and 2 to 4
+ * microseconds on OMAP4, so this timeout may be too high.
+ */
+#define MAX_IOPAD_LATCH_TIME			100
+
 # ifndef __ASSEMBLER__
 extern void __iomem *prm_base;
 extern void __iomem *cm_base;

arch/arm/mach-omap2/prm2xxx_3xxx.c

@@ -302,11 +302,59 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask)
 				OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 }
 
+/**
+ * omap3xxx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings.  Works
+ * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
+ * deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit.  No
+ * return value.
+ */
+void omap3xxx_prm_reconfigure_io_chain(void)
+{
+	int i = 0;
+
+	omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				   PM_WKEN);
+
+	omap_test_timeout(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+			  OMAP3430_ST_IO_CHAIN_MASK,
+			  MAX_IOPAD_LATCH_TIME, i);
+	if (i == MAX_IOPAD_LATCH_TIME)
+		pr_warn("PRM: I/O chain clock line assertion timed out\n");
+
+	omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD,
+				     PM_WKEN);
+
+	omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, WKUP_MOD,
+				   PM_WKST);
+
+	omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
+}
+
+/**
+ * omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM.  For I/O
+ * wakeups to occur, WAKEUPENABLE bits must be set in the pad mux
+ * registers, and omap3xxx_prm_reconfigure_io_chain() must be called.
+ * No return value.
+ */
+static void __init omap3xxx_prm_enable_io_wakeup(void)
+{
+	if (omap3_has_io_wakeup())
+		omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
+					   PM_WKEN);
+}
+
 static int __init omap3xxx_prcm_init(void)
 {
 	int ret = 0;
 
 	if (cpu_is_omap34xx()) {
+		omap3xxx_prm_enable_io_wakeup();
 		ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
 		if (!ret)
 			irq_set_status_flags(omap_prcm_event_to_irq("io"),

arch/arm/mach-omap2/prm2xxx_3xxx.h

@@ -253,12 +253,15 @@ extern u32 omap3_prm_vcvp_read(u8 offset);
 extern void omap3_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
+extern void omap3xxx_prm_reconfigure_io_chain(void);
+
 /* PRM interrupt-related functions */
 extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
 extern void omap3xxx_prm_ocp_barrier(void);
 extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
 extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
-#endif
+
+#endif /* __ASSEMBLER */
 
 /*
  * Bits common to specific registers

arch/arm/mach-omap2/prm44xx.c

@@ -233,10 +233,71 @@ void omap44xx_prm_restore_irqen(u32 *saved_mask)
 				 OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
 }
 
+/**
+ * omap44xx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings.  Works
+ * by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
+ * deasserting WUCLKIN and waiting for WUCLKOUT to be deasserted.
+ * No return value. XXX Are the final two steps necessary?
+ */
+void omap44xx_prm_reconfigure_io_chain(void)
+{
+	int i = 0;
+
+	/* Trigger WUCLKIN enable */
+	omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK,
+				    OMAP4430_WUCLK_CTRL_MASK,
+				    OMAP4430_PRM_DEVICE_INST,
+				    OMAP4_PRM_IO_PMCTRL_OFFSET);
+	omap_test_timeout(
+		(((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+					   OMAP4_PRM_IO_PMCTRL_OFFSET) &
+		   OMAP4430_WUCLK_STATUS_MASK) >>
+		  OMAP4430_WUCLK_STATUS_SHIFT) == 1),
+		MAX_IOPAD_LATCH_TIME, i);
+	if (i == MAX_IOPAD_LATCH_TIME)
+		pr_warn("PRM: I/O chain clock line assertion timed out\n");
+
+	/* Trigger WUCLKIN disable */
+	omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0,
+				    OMAP4430_PRM_DEVICE_INST,
+				    OMAP4_PRM_IO_PMCTRL_OFFSET);
+	omap_test_timeout(
+		(((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
+					   OMAP4_PRM_IO_PMCTRL_OFFSET) &
+		   OMAP4430_WUCLK_STATUS_MASK) >>
+		  OMAP4430_WUCLK_STATUS_SHIFT) == 0),
+		MAX_IOPAD_LATCH_TIME, i);
+	if (i == MAX_IOPAD_LATCH_TIME)
+		pr_warn("PRM: I/O chain clock line deassertion timed out\n");
+
+	return;
+}
+
+/**
+ * omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
+ *
+ * Activates the I/O wakeup event latches and allows events logged by
+ * those latches to signal a wakeup event to the PRCM.  For I/O wakeups
+ * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
+ * omap44xx_prm_reconfigure_io_chain() must be called.  No return value.
+ */
+static void __init omap44xx_prm_enable_io_wakeup(void)
+{
+	omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK,
+				    OMAP4430_GLOBAL_WUEN_MASK,
+				    OMAP4430_PRM_DEVICE_INST,
+				    OMAP4_PRM_IO_PMCTRL_OFFSET);
+}
+
 static int __init omap4xxx_prcm_init(void)
 {
-	if (cpu_is_omap44xx())
+	if (cpu_is_omap44xx()) {
+		omap44xx_prm_enable_io_wakeup();
 		return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
+	}
 	return 0;
 }
 subsys_initcall(omap4xxx_prcm_init);

arch/arm/mach-omap2/prm44xx.h

@@ -763,6 +763,8 @@ extern u32 omap4_prm_vcvp_read(u8 offset);
 extern void omap4_prm_vcvp_write(u32 val, u8 offset);
 extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
 
+extern void omap44xx_prm_reconfigure_io_chain(void);
+
 /* PRM interrupt-related functions */
 extern void omap44xx_prm_read_pending_irqs(unsigned long *events);
 extern void omap44xx_prm_ocp_barrier(void);

arch/arm/mach-omap2/smartreflex-class3.c

@@ -11,36 +11,37 @@
  * published by the Free Software Foundation.
  */
 
-#include "smartreflex.h"
+#include <linux/power/smartreflex.h>
+#include "voltage.h"
 
-static int sr_class3_enable(struct voltagedomain *voltdm)
+static int sr_class3_enable(struct omap_sr *sr)
 {
-	unsigned long volt = voltdm_get_voltage(voltdm);
+	unsigned long volt = voltdm_get_voltage(sr->voltdm);
 
 	if (!volt) {
-		pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n",
-				__func__, voltdm->name);
+		pr_warning("%s: Curr voltage unknown. Cannot enable %s\n",
+				__func__, sr->name);
 		return -ENODATA;
 	}
 
-	omap_vp_enable(voltdm);
-	return sr_enable(voltdm, volt);
+	omap_vp_enable(sr->voltdm);
+	return sr_enable(sr->voltdm, volt);
 }
 
-static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset)
+static int sr_class3_disable(struct omap_sr *sr, int is_volt_reset)
 {
-	sr_disable_errgen(voltdm);
-	omap_vp_disable(voltdm);
-	sr_disable(voltdm);
+	sr_disable_errgen(sr->voltdm);
+	omap_vp_disable(sr->voltdm);
+	sr_disable(sr->voltdm);
 	if (is_volt_reset)
-		voltdm_reset(voltdm);
+		voltdm_reset(sr->voltdm);
 
 	return 0;
 }
 
-static int sr_class3_configure(struct voltagedomain *voltdm)
+static int sr_class3_configure(struct omap_sr *sr)
 {
-	return sr_configure_errgen(voltdm);
+	return sr_configure_errgen(sr->voltdm);
 }
 
 /* SR class3 structure */

arch/arm/mach-omap2/sr_device.c

@@ -17,6 +17,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/power/smartreflex.h>
 
 #include <linux/err.h>
 #include <linux/slab.h>
@@ -24,7 +25,6 @@
 
 #include <plat/omap_device.h>
 
-#include "smartreflex.h"
 #include "voltage.h"
 #include "control.h"
 #include "pm.h"
@@ -36,7 +36,10 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 				struct omap_sr_data *sr_data)
 {
 	struct omap_sr_nvalue_table *nvalue_table;
-	int i, count = 0;
+	int i, j, count = 0;
+
+	sr_data->nvalue_count = 0;
+	sr_data->nvalue_table = NULL;
 
 	while (volt_data[count].volt_nominal)
 		count++;
@@ -44,8 +47,14 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 	nvalue_table = kzalloc(sizeof(struct omap_sr_nvalue_table)*count,
 			GFP_KERNEL);
 
-	for (i = 0; i < count; i++) {
+	if (!nvalue_table) {
+		pr_err("OMAP: SmartReflex: cannot allocate memory for n-value table\n");
+		return;
+	}
+
+	for (i = 0, j = 0; i < count; i++) {
 		u32 v;
+
 		/*
 		 * In OMAP4 the efuse registers are 24 bit aligned.
 		 * A __raw_readl will fail for non-32 bit aligned address
@@ -58,15 +67,30 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 				omap_ctrl_readb(offset + 1) << 8 |
 				omap_ctrl_readb(offset + 2) << 16;
 		} else {
-			 v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
+			v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
 		}
 
-		nvalue_table[i].efuse_offs = volt_data[i].sr_efuse_offs;
-		nvalue_table[i].nvalue = v;
+		/*
+		 * Many OMAP SoCs don't have the eFuse values set.
+		 * For example, pretty much all OMAP3xxx before
+		 * ES3.something.
+		 *
+		 * XXX There needs to be some way for board files or
+		 * userspace to add these in.
+		 */
+		if (v == 0)
+			continue;
+
+		nvalue_table[j].nvalue = v;
+		nvalue_table[j].efuse_offs = volt_data[i].sr_efuse_offs;
+		nvalue_table[j].errminlimit = volt_data[i].sr_errminlimit;
+		nvalue_table[j].volt_nominal = volt_data[i].volt_nominal;
+
+		j++;
 	}
 
 	sr_data->nvalue_table = nvalue_table;
-	sr_data->nvalue_count = count;
+	sr_data->nvalue_count = j;
 }
 
 static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
@@ -93,6 +117,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 		goto exit;
 	}
 
+	sr_data->name = oh->name;
 	sr_data->ip_type = oh->class->rev;
 	sr_data->senn_mod = 0x1;
 	sr_data->senp_mod = 0x1;

arch/arm/mach-omap2/voltage.h

@@ -16,6 +16,8 @@
 
 #include <linux/err.h>
 
+#include <plat/voltage.h>
+
 #include "vc.h"
 #include "vp.h"
 
@@ -90,25 +92,6 @@ struct voltagedomain {
 	struct omap_volt_data *volt_data;
 };
 
-/**
- * struct omap_volt_data - Omap voltage specific data.
- * @voltage_nominal:	The possible voltage value in uV
- * @sr_efuse_offs:	The offset of the efuse register(from system
- *			control module base address) from where to read
- *			the n-target value for the smartreflex module.
- * @sr_errminlimit:	Error min limit value for smartreflex. This value
- *			differs at differnet opp and thus is linked
- *			with voltage.
- * @vp_errorgain:	Error gain value for the voltage processor. This
- *			field also differs according to the voltage/opp.
- */
-struct omap_volt_data {
-	u32	volt_nominal;
-	u32	sr_efuse_offs;
-	u8	sr_errminlimit;
-	u8	vp_errgain;
-};
-
 /**
  * struct omap_voltdm_pmic - PMIC specific data required by voltage driver.
  * @slew_rate:	PMIC slew rate (in uv/us)

arch/arm/plat-mxc/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_MXC_USE_EPIT) += epit.o
 obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpufreq.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
 ifdef CONFIG_SND_IMX_SOC
 obj-y += ssi-fiq.o
 obj-y += ssi-fiq-ksym.o

arch/arm/plat-mxc/cpuidle.c

@@ -0,0 +1,80 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/err.h>
+#include <linux/hrtimer.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+static struct cpuidle_device __percpu * imx_cpuidle_devices;
+
+static void __init imx_cpuidle_devices_uninit(void)
+{
+	int cpu_id;
+	struct cpuidle_device *dev;
+
+	for_each_possible_cpu(cpu_id) {
+		dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id);
+		cpuidle_unregister_device(dev);
+	}
+
+	free_percpu(imx_cpuidle_devices);
+}
+
+int __init imx_cpuidle_init(struct cpuidle_driver *drv)
+{
+	struct cpuidle_device *dev;
+	int cpu_id, ret;
+
+	if (drv->state_count > CPUIDLE_STATE_MAX) {
+		pr_err("%s: state_count exceeds maximum\n", __func__);
+		return -EINVAL;
+	}
+
+	ret = cpuidle_register_driver(drv);
+	if (ret) {
+		pr_err("%s: Failed to register cpuidle driver with error: %d\n",
+			 __func__, ret);
+		return ret;
+	}
+
+	imx_cpuidle_devices = alloc_percpu(struct cpuidle_device);
+	if (imx_cpuidle_devices == NULL) {
+		ret = -ENOMEM;
+		goto unregister_drv;
+	}
+
+	/* initialize state data for each cpuidle_device */
+	for_each_possible_cpu(cpu_id) {
+		dev = per_cpu_ptr(imx_cpuidle_devices, cpu_id);
+		dev->cpu = cpu_id;
+		dev->state_count = drv->state_count;
+
+		ret = cpuidle_register_device(dev);
+		if (ret) {
+			pr_err("%s: Failed to register cpu %u, error: %d\n",
+				__func__, cpu_id, ret);
+			goto uninit;
+		}
+	}
+
+	return 0;
+
+uninit:
+	imx_cpuidle_devices_uninit();
+
+unregister_drv:
+	cpuidle_unregister_driver(drv);
+	return ret;
+}

arch/arm/plat-mxc/include/mach/common.h

@@ -54,6 +54,7 @@ extern void imx50_soc_init(void);
 extern void imx51_soc_init(void);
 extern void imx53_soc_init(void);
 extern void imx51_init_late(void);
+extern void imx53_init_late(void);
 extern void epit_timer_init(void __iomem *base, int irq);
 extern void mxc_timer_init(void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
@@ -96,7 +97,6 @@ enum mx3_cpu_pwr_mode {
 };
 
 extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
-extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
 extern void imx_print_silicon_rev(const char *cpu, int srev);
 
 void avic_handle_irq(struct pt_regs *);
@@ -147,8 +147,12 @@ extern void imx6q_clock_map_io(void);
 
 #ifdef CONFIG_PM
 extern void imx6q_pm_init(void);
+extern void imx51_pm_init(void);
+extern void imx53_pm_init(void);
 #else
 static inline void imx6q_pm_init(void) {}
+static inline void imx51_pm_init(void) {}
+static inline void imx53_pm_init(void) {}
 #endif
 
 #ifdef CONFIG_NEON

arch/arm/plat-mxc/include/mach/cpuidle.h

@@ -0,0 +1,22 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/cpuidle.h>
+
+#ifdef CONFIG_CPU_IDLE
+extern int imx_cpuidle_init(struct cpuidle_driver *drv);
+#else
+static inline int imx_cpuidle_init(struct cpuidle_driver *drv)
+{
+	return -ENODEV;
+}
+#endif

arch/arm/plat-mxc/include/mach/hardware.h

@@ -50,7 +50,7 @@
  *	IO	0x00200000+0x100000	->	0xf4000000+0x100000
  * mx21:
  *	AIPI	0x10000000+0x100000	->	0xf4400000+0x100000
- *	SAHB1	0x80000000+0x100000	->	0xf4000000+0x100000
+ *	SAHB1	0x80000000+0x100000	->	0xf5000000+0x100000
  *	X_MEMC	0xdf000000+0x004000	->	0xf5f00000+0x004000
  * mx25:
  *	AIPS1	0x43f00000+0x100000	->	0xf5300000+0x100000
@@ -58,47 +58,50 @@
  *	AVIC	0x68000000+0x100000	->	0xf5800000+0x100000
  * mx27:
  *	AIPI	0x10000000+0x100000	->	0xf4400000+0x100000
- *	SAHB1	0x80000000+0x100000	->	0xf4000000+0x100000
+ *	SAHB1	0x80000000+0x100000	->	0xf5000000+0x100000
  *	X_MEMC	0xd8000000+0x100000	->	0xf5c00000+0x100000
  * mx31:
  *	AIPS1	0x43f00000+0x100000	->	0xf5300000+0x100000
  *	AIPS2	0x53f00000+0x100000	->	0xf5700000+0x100000
  *	AVIC	0x68000000+0x100000	->	0xf5800000+0x100000
- *	X_MEMC	0xb8000000+0x010000	->	0xf4c00000+0x010000
+ *	X_MEMC	0xb8000000+0x010000	->	0xf5c00000+0x010000
  *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
  * mx35:
  *	AIPS1	0x43f00000+0x100000	->	0xf5300000+0x100000
  *	AIPS2	0x53f00000+0x100000	->	0xf5700000+0x100000
  *	AVIC	0x68000000+0x100000	->	0xf5800000+0x100000
- *	X_MEMC	0xb8000000+0x010000	->	0xf4c00000+0x010000
+ *	X_MEMC	0xb8000000+0x010000	->	0xf5c00000+0x010000
  *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
  * mx50:
  *	TZIC	0x0fffc000+0x004000	->	0xf4bfc000+0x004000
- *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
  *	AIPS1	0x53f00000+0x100000	->	0xf5700000+0x100000
+ *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
  *	AIPS2	0x63f00000+0x100000	->	0xf5300000+0x100000
  * mx51:
- *	TZIC	0xe0000000+0x004000	->	0xf5000000+0x004000
+ *	TZIC	0x0fffc000+0x004000	->	0xf4bfc000+0x004000
  *	IRAM	0x1ffe0000+0x020000	->	0xf4fe0000+0x020000
+ *	DEBUG	0x60000000+0x100000	->	0xf5000000+0x100000
  *	SPBA0	0x70000000+0x100000	->	0xf5400000+0x100000
  *	AIPS1	0x73f00000+0x100000	->	0xf5700000+0x100000
- *	AIPS2	0x83f00000+0x100000	->	0xf4300000+0x100000
+ *	AIPS2	0x83f00000+0x100000	->	0xf5300000+0x100000
  * mx53:
  *	TZIC	0x0fffc000+0x004000	->	0xf4bfc000+0x004000
+ *	DEBUG	0x40000000+0x100000	->	0xf5000000+0x100000
  *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
  *	AIPS1	0x53f00000+0x100000	->	0xf5700000+0x100000
  *	AIPS2	0x63f00000+0x100000	->	0xf5300000+0x100000
  * mx6q:
- *	SCU	0x00a00000+0x001000	->	0xf4000000+0x001000
+ *	SCU	0x00a00000+0x004000	->	0xf4000000+0x004000
  *	CCM	0x020c4000+0x004000	->	0xf42c4000+0x004000
- *	ANATOP	0x020c8000+0x001000	->	0xf42c8000+0x001000
+ *	ANATOP	0x020c8000+0x004000	->	0xf42c8000+0x004000
  *	UART4	0x021f0000+0x004000	->	0xf42f0000+0x004000
  */
 #define IMX_IO_P2V(x)	(						\
-			0xf4000000 +					\
+			(((x) & 0x80000000) >> 7) |			\
+			(0xf4000000 +					\
 			(((x) & 0x50000000) >> 6) +			\
 			(((x) & 0x0b000000) >> 4) +			\
-			(((x) & 0x000fffff)))
+			(((x) & 0x000fffff))))
 
 #define IMX_IO_ADDRESS(x)	IOMEM(IMX_IO_P2V(x))
 

arch/arm/plat-mxc/tzic.c

@@ -202,6 +202,10 @@ void __init tzic_init_irq(void __iomem *irqbase)
  * tzic_enable_wake() - enable wakeup interrupt
  *
  * @return			0 if successful; non-zero otherwise
+ *
+ * This function provides an interrupt synchronization point that is required
+ * by tzic enabled platforms before entering imx specific low power modes (ie,
+ * those low power modes beyond the WAIT_CLOCKED basic ARM WFI only mode).
  */
 int tzic_enable_wake(void)
 {

arch/arm/plat-omap/Kconfig

@@ -45,31 +45,30 @@ config OMAP_DEBUG_LEDS
 	depends on OMAP_DEBUG_DEVICES
 	default y if LEDS_CLASS
 
-config OMAP_SMARTREFLEX
-	bool "SmartReflex support"
-	depends on (ARCH_OMAP3 || ARCH_OMAP4) && PM
+config POWER_AVS_OMAP
+	bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2"
+	depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM
 	help
-	  Say Y if you want to enable SmartReflex.
-
-	  SmartReflex can perform continuous dynamic voltage
-	  scaling around the nominal operating point voltage
-	  according to silicon characteristics and operating
-	  conditions. Enabling SmartReflex reduces power
-	  consumption.
+	  Say Y to enable AVS(Adaptive Voltage Scaling)
+	  support on OMAP containing the version 1 or
+	  version 2 of the SmartReflex IP.
+	  V1 is the 65nm version used in OMAP3430.
+	  V2 is the update for the 45nm version of the IP used in OMAP3630
+	  and OMAP4430
 
 	  Please note, that by default SmartReflex is only
-	  initialized. To enable the automatic voltage
-	  compensation for vdd mpu  and vdd core from user space,
+	  initialized and not enabled. To enable the automatic voltage
+	  compensation for vdd mpu and vdd core from user space,
 	  user must write 1 to
-		/debug/voltage/vdd_<X>/smartreflex/autocomp,
-	  where X is mpu or core for OMAP3.
+		/debug/smartreflex/sr_<X>/autocomp,
+	  where X is mpu_iva or core for OMAP3.
 	  Optionally autocompensation can be enabled in the kernel
 	  by default during system init via the enable_on_init flag
 	  which an be passed as platform data to the smartreflex driver.
 
-config OMAP_SMARTREFLEX_CLASS3
+config POWER_AVS_OMAP_CLASS3
 	bool "Class 3 mode of Smartreflex Implementation"
-	depends on OMAP_SMARTREFLEX && TWL4030_CORE
+	depends on POWER_AVS_OMAP && TWL4030_CORE
 	help
 	  Say Y to enable Class 3 implementation of Smartreflex
 

arch/arm/plat-omap/include/plat/voltage.h

@@ -11,10 +11,29 @@
 #ifndef __ARCH_ARM_OMAP_VOLTAGE_H
 #define __ARCH_ARM_OMAP_VOLTAGE_H
 
+/**
+ * struct omap_volt_data - Omap voltage specific data.
+ * @voltage_nominal:	The possible voltage value in uV
+ * @sr_efuse_offs:	The offset of the efuse register(from system
+ *			control module base address) from where to read
+ *			the n-target value for the smartreflex module.
+ * @sr_errminlimit:	Error min limit value for smartreflex. This value
+ *			differs at differnet opp and thus is linked
+ *			with voltage.
+ * @vp_errorgain:	Error gain value for the voltage processor. This
+ *			field also differs according to the voltage/opp.
+ */
+struct omap_volt_data {
+	u32	volt_nominal;
+	u32	sr_efuse_offs;
+	u8	sr_errminlimit;
+	u8	vp_errgain;
+};
 struct voltagedomain;
 
 struct voltagedomain *voltdm_lookup(const char *name);
 int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
 unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
-
+struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
+		unsigned long volt);
 #endif

drivers/power/Kconfig

@@ -310,3 +310,5 @@ config AB8500_BATTERY_THERM_ON_BATCTRL
 	  Say Y to enable battery temperature measurements using
 	  thermistor connected on BATCTRL ADC.
 endif # POWER_SUPPLY
+
+source "drivers/power/avs/Kconfig"

drivers/power/Makefile

@@ -43,4 +43,5 @@ obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
 obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
+obj-$(CONFIG_POWER_AVS)		+= avs/
 obj-$(CONFIG_CHARGER_SMB347)	+= smb347-charger.o

drivers/power/avs/Kconfig

@@ -0,0 +1,12 @@
+menuconfig POWER_AVS
+	bool "Adaptive Voltage Scaling class support"
+	help
+	  AVS is a power management technique which finely controls the
+	  operating voltage of a device in order to optimize (i.e. reduce)
+	  its power consumption.
+	  At a given operating point the voltage is adapted depending on
+	  static factors (chip manufacturing process) and dynamic factors
+	  (temperature depending performance).
+	  AVS is also called SmartReflex on OMAP devices.
+
+	  Say Y here to enable Adaptive Voltage Scaling class support.

drivers/power/avs/Makefile

@@ -0,0 +1 @@
+obj-$(CONFIG_POWER_AVS_OMAP)		+= smartreflex.o

arch/arm/mach-omap2/smartreflex.c → drivers/power/avs/smartreflex.c

@@ -3,7 +3,7 @@
  *
  * Author: Thara Gopinath	<thara@ti.com>
  *
- * Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright (C) 2012 Texas Instruments, Inc.
  * Thara Gopinath <thara@ti.com>
  *
  * Copyright (C) 2008 Nokia Corporation
@@ -25,39 +25,12 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/pm_runtime.h>
-
-#include "common.h"
-
-#include "pm.h"
-#include "smartreflex.h"
+#include <linux/power/smartreflex.h>
 
 #define SMARTREFLEX_NAME_LEN	16
 #define NVALUE_NAME_LEN		40
 #define SR_DISABLE_TIMEOUT	200
 
-struct omap_sr {
-	struct list_head		node;
-	struct platform_device		*pdev;
-	struct omap_sr_nvalue_table	*nvalue_table;
-	struct voltagedomain		*voltdm;
-	struct dentry			*dbg_dir;
-	unsigned int			irq;
-	int				srid;
-	int				ip_type;
-	int				nvalue_count;
-	bool				autocomp_active;
-	u32				clk_length;
-	u32				err_weight;
-	u32				err_minlimit;
-	u32				err_maxlimit;
-	u32				accum_data;
-	u32				senn_avgweight;
-	u32				senp_avgweight;
-	u32				senp_mod;
-	u32				senn_mod;
-	void __iomem			*base;
-};
-
 /* sr_list contains all the instances of smartreflex module */
 static LIST_HEAD(sr_list);
 
@@ -148,7 +121,7 @@ static irqreturn_t sr_interrupt(int irq, void *data)
 	}
 
 	if (sr_class->notify)
-		sr_class->notify(sr_info->voltdm, status);
+		sr_class->notify(sr_info, status);
 
 	return IRQ_HANDLED;
 }
@@ -207,7 +180,7 @@ static void sr_set_regfields(struct omap_sr *sr)
 		sr->err_weight = OMAP3430_SR_ERRWEIGHT;
 		sr->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
 		sr->accum_data = OMAP3430_SR_ACCUMDATA;
-		if (!(strcmp(sr->voltdm->name, "mpu"))) {
+		if (!(strcmp(sr->name, "smartreflex_mpu_iva"))) {
 			sr->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
 			sr->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
 		} else {
@@ -226,7 +199,7 @@ static void sr_start_vddautocomp(struct omap_sr *sr)
 		return;
 	}
 
-	if (!sr_class->enable(sr->voltdm))
+	if (!sr_class->enable(sr))
 		sr->autocomp_active = true;
 }
 
@@ -240,7 +213,7 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
 	}
 
 	if (sr->autocomp_active) {
-		sr_class->disable(sr->voltdm, 1);
+		sr_class->disable(sr, 1);
 		sr->autocomp_active = false;
 	}
 }
@@ -258,19 +231,13 @@ static void sr_stop_vddautocomp(struct omap_sr *sr)
  */
 static int sr_late_init(struct omap_sr *sr_info)
 {
-	char *name;
 	struct omap_sr_data *pdata = sr_info->pdev->dev.platform_data;
 	struct resource *mem;
 	int ret = 0;
 
 	if (sr_class->notify && sr_class->notify_flags && sr_info->irq) {
-		name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
-		if (name == NULL) {
-			ret = -ENOMEM;
-			goto error;
-		}
 		ret = request_irq(sr_info->irq, sr_interrupt,
-				0, name, sr_info);
+				  0, sr_info->name, sr_info);
 		if (ret)
 			goto error;
 		disable_irq(sr_info->irq);
@@ -289,7 +256,6 @@ error:
 	dev_err(&sr_info->pdev->dev, "%s: ERROR in registering"
 		"interrupt handler. Smartreflex will"
 		"not function as desired\n", __func__);
-	kfree(name);
 	kfree(sr_info);
 
 	return ret;
@@ -320,9 +286,9 @@ static void sr_v1_disable(struct omap_sr *sr)
 	 * Wait for SR to be disabled.
 	 * wait until ERRCONFIG.MCUDISACKINTST = 1. Typical latency is 1us.
 	 */
-	omap_test_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
-			ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
-			timeout);
+	sr_test_cond_timeout((sr_read_reg(sr, ERRCONFIG_V1) &
+			     ERRCONFIG_MCUDISACKINTST), SR_DISABLE_TIMEOUT,
+			     timeout);
 
 	if (timeout >= SR_DISABLE_TIMEOUT)
 		dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
@@ -365,9 +331,9 @@ static void sr_v2_disable(struct omap_sr *sr)
 	 * Wait for SR to be disabled.
 	 * wait until IRQSTATUS.MCUDISACKINTST = 1. Typical latency is 1us.
 	 */
-	omap_test_timeout((sr_read_reg(sr, IRQSTATUS) &
-			IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
-			timeout);
+	sr_test_cond_timeout((sr_read_reg(sr, IRQSTATUS) &
+			     IRQSTATUS_MCUDISABLEACKINT), SR_DISABLE_TIMEOUT,
+			     timeout);
 
 	if (timeout >= SR_DISABLE_TIMEOUT)
 		dev_warn(&sr->pdev->dev, "%s: Smartreflex disable timedout\n",
@@ -378,22 +344,23 @@ static void sr_v2_disable(struct omap_sr *sr)
 	sr_write_reg(sr, IRQSTATUS, IRQSTATUS_MCUDISABLEACKINT);
 }
 
-static u32 sr_retrieve_nvalue(struct omap_sr *sr, u32 efuse_offs)
+static struct omap_sr_nvalue_table *sr_retrieve_nvalue_row(
+				struct omap_sr *sr, u32 efuse_offs)
 {
 	int i;
 
 	if (!sr->nvalue_table) {
 		dev_warn(&sr->pdev->dev, "%s: Missing ntarget value table\n",
 			__func__);
-		return 0;
+		return NULL;
 	}
 
 	for (i = 0; i < sr->nvalue_count; i++) {
 		if (sr->nvalue_table[i].efuse_offs == efuse_offs)
-			return sr->nvalue_table[i].nvalue;
+			return &sr->nvalue_table[i];
 	}
 
-	return 0;
+	return NULL;
 }
 
 /* Public Functions */
@@ -419,8 +386,7 @@ int sr_configure_errgen(struct voltagedomain *voltdm)
 	struct omap_sr *sr = _sr_lookup(voltdm);
 
 	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
 		return PTR_ERR(sr);
 	}
 
@@ -487,8 +453,7 @@ int sr_disable_errgen(struct voltagedomain *voltdm)
 	struct omap_sr *sr = _sr_lookup(voltdm);
 
 	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
 		return PTR_ERR(sr);
 	}
 
@@ -538,8 +503,7 @@ int sr_configure_minmax(struct voltagedomain *voltdm)
 	struct omap_sr *sr = _sr_lookup(voltdm);
 
 	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
 		return PTR_ERR(sr);
 	}
 
@@ -620,12 +584,11 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
 {
 	struct omap_volt_data *volt_data;
 	struct omap_sr *sr = _sr_lookup(voltdm);
-	u32 nvalue_reciprocal;
+	struct omap_sr_nvalue_table *nvalue_row;
 	int ret;
 
 	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
 		return PTR_ERR(sr);
 	}
 
@@ -637,16 +600,16 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
 		return PTR_ERR(volt_data);
 	}
 
-	nvalue_reciprocal = sr_retrieve_nvalue(sr, volt_data->sr_efuse_offs);
+	nvalue_row = sr_retrieve_nvalue_row(sr, volt_data->sr_efuse_offs);
 
-	if (!nvalue_reciprocal) {
-		dev_warn(&sr->pdev->dev, "%s: NVALUE = 0 at voltage %ld\n",
-			__func__, volt);
+	if (!nvalue_row) {
+		dev_warn(&sr->pdev->dev, "%s: failure getting SR data for this voltage %ld\n",
+			 __func__, volt);
 		return -ENODATA;
 	}
 
 	/* errminlimit is opp dependent and hence linked to voltage */
-	sr->err_minlimit = volt_data->sr_errminlimit;
+	sr->err_minlimit = nvalue_row->errminlimit;
 
 	pm_runtime_get_sync(&sr->pdev->dev);
 
@@ -655,11 +618,11 @@ int sr_enable(struct voltagedomain *voltdm, unsigned long volt)
 		return 0;
 
 	/* Configure SR */
-	ret = sr_class->configure(voltdm);
+	ret = sr_class->configure(sr);
 	if (ret)
 		return ret;
 
-	sr_write_reg(sr, NVALUERECIPROCAL, nvalue_reciprocal);
+	sr_write_reg(sr, NVALUERECIPROCAL, nvalue_row->nvalue);
 
 	/* SRCONFIG - enable SR */
 	sr_modify_reg(sr, SRCONFIG, SRCONFIG_SRENABLE, SRCONFIG_SRENABLE);
@@ -678,8 +641,7 @@ void sr_disable(struct voltagedomain *voltdm)
 	struct omap_sr *sr = _sr_lookup(voltdm);
 
 	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
 		return;
 	}
 
@@ -759,8 +721,7 @@ void omap_sr_enable(struct voltagedomain *voltdm)
 	struct omap_sr *sr = _sr_lookup(voltdm);
 
 	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
 		return;
 	}
 
@@ -773,7 +734,7 @@ void omap_sr_enable(struct voltagedomain *voltdm)
 		return;
 	}
 
-	sr_class->enable(voltdm);
+	sr_class->enable(sr);
 }
 
 /**
@@ -792,8 +753,7 @@ void omap_sr_disable(struct voltagedomain *voltdm)
 	struct omap_sr *sr = _sr_lookup(voltdm);
 
 	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
 		return;
 	}
 
@@ -806,7 +766,7 @@ void omap_sr_disable(struct voltagedomain *voltdm)
 		return;
 	}
 
-	sr_class->disable(voltdm, 0);
+	sr_class->disable(sr, 0);
 }
 
 /**
@@ -825,8 +785,7 @@ void omap_sr_disable_reset_volt(struct voltagedomain *voltdm)
 	struct omap_sr *sr = _sr_lookup(voltdm);
 
 	if (IS_ERR(sr)) {
-		pr_warning("%s: omap_sr struct for sr_%s not found\n",
-			__func__, voltdm->name);
+		pr_warning("%s: omap_sr struct for voltdm not found\n",	__func__);
 		return;
 	}
 
@@ -839,7 +798,7 @@ void omap_sr_disable_reset_volt(struct voltagedomain *voltdm)
 		return;
 	}
 
-	sr_class->disable(voltdm, 1);
+	sr_class->disable(sr, 1);
 }
 
 /**
@@ -911,9 +870,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 	struct omap_sr_data *pdata = pdev->dev.platform_data;
 	struct resource *mem, *irq;
 	struct dentry *nvalue_dir;
-	struct omap_volt_data *volt_data;
 	int i, ret = 0;
-	char *name;
 
 	sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL);
 	if (!sr_info) {
@@ -950,6 +907,14 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 	pm_runtime_irq_safe(&pdev->dev);
 
+	sr_info->name = kasprintf(GFP_KERNEL, "%s", pdata->name);
+	if (!sr_info->name) {
+		dev_err(&pdev->dev, "%s: Unable to alloc SR instance name\n",
+			__func__);
+		ret = -ENOMEM;
+		goto err_release_region;
+	}
+
 	sr_info->pdev = pdev;
 	sr_info->srid = pdev->id;
 	sr_info->voltdm = pdata->voltdm;
@@ -997,20 +962,12 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 		}
 	}
 
-	name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name);
-	if (!name) {
-		dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n",
-			__func__);
-		ret = -ENOMEM;
-		goto err_iounmap;
-	}
-	sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir);
-	kfree(name);
+	sr_info->dbg_dir = debugfs_create_dir(sr_info->name, sr_dbg_dir);
 	if (IS_ERR_OR_NULL(sr_info->dbg_dir)) {
 		dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n",
 			__func__);
 		ret = PTR_ERR(sr_info->dbg_dir);
-		goto err_iounmap;
+		goto err_free_name;
 	}
 
 	(void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR,
@@ -1019,8 +976,6 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 			&sr_info->err_weight);
 	(void) debugfs_create_x32("errmaxlimit", S_IRUGO, sr_info->dbg_dir,
 			&sr_info->err_maxlimit);
-	(void) debugfs_create_x32("errminlimit", S_IRUGO, sr_info->dbg_dir,
-			&sr_info->err_minlimit);
 
 	nvalue_dir = debugfs_create_dir("nvalue", sr_info->dbg_dir);
 	if (IS_ERR_OR_NULL(nvalue_dir)) {
@@ -1030,12 +985,10 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 		goto err_debugfs;
 	}
 
-	omap_voltage_get_volttable(sr_info->voltdm, &volt_data);
-	if (!volt_data) {
-		dev_warn(&pdev->dev, "%s: No Voltage table for the"
-			" corresponding vdd vdd_%s. Cannot create debugfs"
-			"entries for n-values\n",
-			__func__, sr_info->voltdm->name);
+	if (sr_info->nvalue_count == 0 || !sr_info->nvalue_table) {
+		dev_warn(&pdev->dev, "%s: %s: No Voltage table for the corresponding vdd. Cannot create debugfs entries for n-values\n",
+			 __func__, sr_info->name);
+
 		ret = -ENODATA;
 		goto err_debugfs;
 	}
@@ -1043,16 +996,23 @@ static int __init omap_sr_probe(struct platform_device *pdev)
 	for (i = 0; i < sr_info->nvalue_count; i++) {
 		char name[NVALUE_NAME_LEN + 1];
 
-		snprintf(name, sizeof(name), "volt_%d",
-			 volt_data[i].volt_nominal);
+		snprintf(name, sizeof(name), "volt_%lu",
+				sr_info->nvalue_table[i].volt_nominal);
 		(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
 				&(sr_info->nvalue_table[i].nvalue));
+		snprintf(name, sizeof(name), "errminlimit_%lu",
+			 sr_info->nvalue_table[i].volt_nominal);
+		(void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir,
+				&(sr_info->nvalue_table[i].errminlimit));
+
 	}
 
 	return ret;
 
 err_debugfs:
 	debugfs_remove_recursive(sr_info->dbg_dir);
+err_free_name:
+	kfree(sr_info->name);
 err_iounmap:
 	list_del(&sr_info->node);
 	iounmap(sr_info->base);
@@ -1089,6 +1049,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev)
 
 	list_del(&sr_info->node);
 	iounmap(sr_info->base);
+	kfree(sr_info->name);
 	kfree(sr_info);
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(mem->start, resource_size(mem));

drivers/w1/masters/Kconfig

@@ -60,7 +60,7 @@ config W1_MASTER_GPIO
 
 config HDQ_MASTER_OMAP
 	tristate "OMAP HDQ driver"
-	depends on SOC_OMAP2430 || ARCH_OMAP3
+	depends on ARCH_OMAP2PLUS
 	help
 	  Say Y here if you want support for the 1-wire or HDQ Interface
 	  on an OMAP processor.

drivers/w1/masters/omap_hdq.c

@@ -1,7 +1,7 @@
 /*
  * drivers/w1/masters/omap_hdq.c
  *
- * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007,2012 Texas Instruments, Inc.
  *
  * This file is licensed under the terms of the GNU General Public License
  * version 2. This program is licensed "as is" without any warranty of any
@@ -14,9 +14,9 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/err.h>
-#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/sched.h>
+#include <linux/pm_runtime.h>
 
 #include <asm/irq.h>
 #include <mach/hardware.h>
@@ -61,8 +61,6 @@ struct hdq_data {
 	/* lock status update */
 	struct  mutex		hdq_mutex;
 	int			hdq_usecount;
-	struct	clk		*hdq_ick;
-	struct	clk		*hdq_fck;
 	u8			hdq_irqstatus;
 	/* device lock */
 	spinlock_t		hdq_spinlock;
@@ -102,20 +100,20 @@ static struct w1_bus_master omap_w1_master = {
 /* HDQ register I/O routines */
 static inline u8 hdq_reg_in(struct hdq_data *hdq_data, u32 offset)
 {
-	return __raw_readb(hdq_data->hdq_base + offset);
+	return __raw_readl(hdq_data->hdq_base + offset);
 }
 
 static inline void hdq_reg_out(struct hdq_data *hdq_data, u32 offset, u8 val)
 {
-	__raw_writeb(val, hdq_data->hdq_base + offset);
+	__raw_writel(val, hdq_data->hdq_base + offset);
 }
 
 static inline u8 hdq_reg_merge(struct hdq_data *hdq_data, u32 offset,
 			u8 val, u8 mask)
 {
-	u8 new_val = (__raw_readb(hdq_data->hdq_base + offset) & ~mask)
+	u8 new_val = (__raw_readl(hdq_data->hdq_base + offset) & ~mask)
 			| (val & mask);
-	__raw_writeb(new_val, hdq_data->hdq_base + offset);
+	__raw_writel(new_val, hdq_data->hdq_base + offset);
 
 	return new_val;
 }
@@ -419,17 +417,8 @@ static int omap_hdq_get(struct hdq_data *hdq_data)
 		hdq_data->hdq_usecount++;
 		try_module_get(THIS_MODULE);
 		if (1 == hdq_data->hdq_usecount) {
-			if (clk_enable(hdq_data->hdq_ick)) {
-				dev_dbg(hdq_data->dev, "Can not enable ick\n");
-				ret = -ENODEV;
-				goto clk_err;
-			}
-			if (clk_enable(hdq_data->hdq_fck)) {
-				dev_dbg(hdq_data->dev, "Can not enable fck\n");
-				clk_disable(hdq_data->hdq_ick);
-				ret = -ENODEV;
-				goto clk_err;
-			}
+
+			pm_runtime_get_sync(hdq_data->dev);
 
 			/* make sure HDQ is out of reset */
 			if (!(hdq_reg_in(hdq_data, OMAP_HDQ_SYSSTATUS) &
@@ -450,9 +439,6 @@ static int omap_hdq_get(struct hdq_data *hdq_data)
 		}
 	}
 
-clk_err:
-	clk_put(hdq_data->hdq_ick);
-	clk_put(hdq_data->hdq_fck);
 out:
 	mutex_unlock(&hdq_data->hdq_mutex);
 rtn:
@@ -475,10 +461,8 @@ static int omap_hdq_put(struct hdq_data *hdq_data)
 	} else {
 		hdq_data->hdq_usecount--;
 		module_put(THIS_MODULE);
-		if (0 == hdq_data->hdq_usecount) {
-			clk_disable(hdq_data->hdq_ick);
-			clk_disable(hdq_data->hdq_fck);
-		}
+		if (0 == hdq_data->hdq_usecount)
+			pm_runtime_put_sync(hdq_data->dev);
 	}
 	mutex_unlock(&hdq_data->hdq_mutex);
 
@@ -591,35 +575,11 @@ static int __devinit omap_hdq_probe(struct platform_device *pdev)
 		goto err_ioremap;
 	}
 
-	/* get interface & functional clock objects */
-	hdq_data->hdq_ick = clk_get(&pdev->dev, "ick");
-	if (IS_ERR(hdq_data->hdq_ick)) {
-		dev_dbg(&pdev->dev, "Can't get HDQ ick clock object\n");
-		ret = PTR_ERR(hdq_data->hdq_ick);
-		goto err_ick;
-	}
-
-	hdq_data->hdq_fck = clk_get(&pdev->dev, "fck");
-	if (IS_ERR(hdq_data->hdq_fck)) {
-		dev_dbg(&pdev->dev, "Can't get HDQ fck clock object\n");
-		ret = PTR_ERR(hdq_data->hdq_fck);
-		goto err_fck;
-	}
-
 	hdq_data->hdq_usecount = 0;
 	mutex_init(&hdq_data->hdq_mutex);
 
-	if (clk_enable(hdq_data->hdq_ick)) {
-		dev_dbg(&pdev->dev, "Can not enable ick\n");
-		ret = -ENODEV;
-		goto err_intfclk;
-	}
-
-	if (clk_enable(hdq_data->hdq_fck)) {
-		dev_dbg(&pdev->dev, "Can not enable fck\n");
-		ret = -ENODEV;
-		goto err_fnclk;
-	}
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_get_sync(&pdev->dev);
 
 	rev = hdq_reg_in(hdq_data, OMAP_HDQ_REVISION);
 	dev_info(&pdev->dev, "OMAP HDQ Hardware Rev %c.%c. Driver in %s mode\n",
@@ -641,9 +601,7 @@ static int __devinit omap_hdq_probe(struct platform_device *pdev)
 
 	omap_hdq_break(hdq_data);
 
-	/* don't clock the HDQ until it is needed */
-	clk_disable(hdq_data->hdq_ick);
-	clk_disable(hdq_data->hdq_fck);
+	pm_runtime_put_sync(&pdev->dev);
 
 	omap_w1_master.data = hdq_data;
 
@@ -655,20 +613,11 @@ static int __devinit omap_hdq_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_w1:
 err_irq:
-	clk_disable(hdq_data->hdq_fck);
-
-err_fnclk:
-	clk_disable(hdq_data->hdq_ick);
-
-err_intfclk:
-	clk_put(hdq_data->hdq_fck);
-
-err_fck:
-	clk_put(hdq_data->hdq_ick);
+	pm_runtime_put_sync(&pdev->dev);
+err_w1:
+	pm_runtime_disable(&pdev->dev);
 
-err_ick:
 	iounmap(hdq_data->hdq_base);
 
 err_ioremap:
@@ -696,8 +645,7 @@ static int omap_hdq_remove(struct platform_device *pdev)
 	mutex_unlock(&hdq_data->hdq_mutex);
 
 	/* remove module dependency */
-	clk_put(hdq_data->hdq_ick);
-	clk_put(hdq_data->hdq_fck);
+	pm_runtime_disable(&pdev->dev);
 	free_irq(INT_24XX_HDQ_IRQ, hdq_data);
 	platform_set_drvdata(pdev, NULL);
 	iounmap(hdq_data->hdq_base);

arch/arm/mach-omap2/smartreflex.h → include/linux/power/smartreflex.h

@@ -17,12 +17,13 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ASM_ARM_OMAP_SMARTREFLEX_H
-#define __ASM_ARM_OMAP_SMARTREFLEX_H
+#ifndef __POWER_SMARTREFLEX_H
+#define __POWER_SMARTREFLEX_H
 
+#include <linux/types.h>
 #include <linux/platform_device.h>
-
-#include "voltage.h"
+#include <linux/delay.h>
+#include <plat/voltage.h>
 
 /*
  * Different Smartreflex IPs version. The v1 is the 65nm version used in
@@ -142,6 +143,51 @@
 #define OMAP3430_SR_ERRWEIGHT		0x04
 #define OMAP3430_SR_ERRMAXLIMIT		0x02
 
+struct omap_sr {
+	char				*name;
+	struct list_head		node;
+	struct platform_device		*pdev;
+	struct omap_sr_nvalue_table	*nvalue_table;
+	struct voltagedomain		*voltdm;
+	struct dentry			*dbg_dir;
+	unsigned int			irq;
+	int				srid;
+	int				ip_type;
+	int				nvalue_count;
+	bool				autocomp_active;
+	u32				clk_length;
+	u32				err_weight;
+	u32				err_minlimit;
+	u32				err_maxlimit;
+	u32				accum_data;
+	u32				senn_avgweight;
+	u32				senp_avgweight;
+	u32				senp_mod;
+	u32				senn_mod;
+	void __iomem			*base;
+};
+
+/**
+ * test_cond_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed.  To use, define some integer @index in the
+ * calling code.  After running, if @index == @timeout, then the loop has
+ * timed out.
+ *
+ * Copied from omap_test_timeout */
+#define sr_test_cond_timeout(cond, timeout, index)		\
+({								\
+	for (index = 0; index < timeout; index++) {		\
+		if (cond)					\
+			break;					\
+		udelay(1);					\
+	}							\
+})
+
 /**
  * struct omap_sr_pmic_data - Strucutre to be populated by pmic code to pass
  *				pmic specific info to smartreflex driver
@@ -161,7 +207,7 @@ struct omap_smartreflex_dev_attr {
 	const char      *sensor_voltdm_name;
 };
 
-#ifdef CONFIG_OMAP_SMARTREFLEX
+#ifdef CONFIG_POWER_AVS_OMAP
 /*
  * The smart reflex driver supports CLASS1 CLASS2 and CLASS3 SR.
  * The smartreflex class driver should pass the class type.
@@ -186,10 +232,10 @@ struct omap_smartreflex_dev_attr {
  *			based decisions.
  */
 struct omap_sr_class_data {
-	int (*enable)(struct voltagedomain *voltdm);
-	int (*disable)(struct voltagedomain *voltdm, int is_volt_reset);
-	int (*configure)(struct voltagedomain *voltdm);
-	int (*notify)(struct voltagedomain *voltdm, u32 status);
+	int (*enable)(struct omap_sr *sr);
+	int (*disable)(struct omap_sr *sr, int is_volt_reset);
+	int (*configure)(struct omap_sr *sr);
+	int (*notify)(struct omap_sr *sr, u32 status);
 	u8 notify_flags;
 	u8 class_type;
 };
@@ -197,17 +243,22 @@ struct omap_sr_class_data {
 /**
  * struct omap_sr_nvalue_table	- Smartreflex n-target value info
  *
- * @efuse_offs:	The offset of the efuse where n-target values are stored.
- * @nvalue:	The n-target value.
+ * @efuse_offs:	  The offset of the efuse where n-target values are stored.
+ * @nvalue:	  The n-target value.
+ * @errminlimit:  The value of the ERRMINLIMIT bitfield for this n-target
+ * @volt_nominal: microvolts DC that the VDD is initially programmed to
  */
 struct omap_sr_nvalue_table {
 	u32 efuse_offs;
 	u32 nvalue;
+	u32 errminlimit;
+	unsigned long volt_nominal;
 };
 
 /**
  * struct omap_sr_data - Smartreflex platform data.
  *
+ * @name:		instance name
  * @ip_type:		Smartreflex IP type.
  * @senp_mod:		SENPENABLE value for the sr
  * @senn_mod:		SENNENABLE value for sr
@@ -219,6 +270,7 @@ struct omap_sr_nvalue_table {
  * @voltdm:		Pointer to the voltage domain associated with the SR
  */
 struct omap_sr_data {
+	const char			*name;
 	int				ip_type;
 	u32				senp_mod;
 	u32				senn_mod;