Revert "serial: omap: fix software flow control"

This reverts commit 957ee7270d632245b43f6feb0e70d9a5e9ea6cf6
(serial: omap: fix software flow control).

As Russell has pointed out, that commit isn't fixing
Software Flow Control at all, and it actually makes
it even more broken.

It was agreed to revert this commit and use Russell's
latest UART patches instead.

Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arch/arm/plat-omap/include/plat/omap-serial.h

@@ -40,10 +40,10 @@
 #define OMAP_UART_WER_MOD_WKUP	0X7F
 
 /* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX		0x8
+#define OMAP_UART_SW_TX		0x04
 
 /* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX		0x2
+#define OMAP_UART_SW_RX		0x04
 
 #define OMAP_UART_SYSC_RESET	0X07
 #define OMAP_UART_TCR_TRIG	0X0F

drivers/tty/serial/omap-serial.c

@@ -671,19 +671,19 @@ serial_omap_configure_xonxoff
 
 	/*
 	 * IXON Flag:
-	 * Flow control for OMAP.TX
-	 * OMAP.RX should listen for XON/XOFF
+	 * Enable XON/XOFF flow control on output.
+	 * Transmit XON1, XOFF1
 	 */
 	if (termios->c_iflag & IXON)
-		up->efr |= OMAP_UART_SW_RX;
+		up->efr |= OMAP_UART_SW_TX;
 
 	/*
 	 * IXOFF Flag:
-	 * Flow control for OMAP.RX
-	 * OMAP.TX should send XON/XOFF
+	 * Enable XON/XOFF flow control on input.
+	 * Receiver compares XON1, XOFF1.
 	 */
 	if (termios->c_iflag & IXOFF)
-		up->efr |= OMAP_UART_SW_TX;
+		up->efr |= OMAP_UART_SW_RX;
 
 	serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);