spi, serial: move to dma_transfer_direction

fixup usage of dma direction by introducing dma_transfer_direction,
this patch moves spi, serial drivers to use new enum

Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Alan Cox <alan@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@iki.fi>

drivers/spi/spi-dw-mid.c

@@ -131,7 +131,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
 	rxchan = dws->rxchan;
 
 	/* 2. Prepare the TX dma transfer */
-	txconf.direction = DMA_TO_DEVICE;
+	txconf.direction = DMA_MEM_TO_DEV;
 	txconf.dst_addr = dws->dma_addr;
 	txconf.dst_maxburst = LNW_DMA_MSIZE_16;
 	txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -147,13 +147,13 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
 	txdesc = txchan->device->device_prep_slave_sg(txchan,
 				&dws->tx_sgl,
 				1,
-				DMA_TO_DEVICE,
+				DMA_MEM_TO_DEV,
 				DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP);
 	txdesc->callback = dw_spi_dma_done;
 	txdesc->callback_param = dws;
 
 	/* 3. Prepare the RX dma transfer */
-	rxconf.direction = DMA_FROM_DEVICE;
+	rxconf.direction = DMA_DEV_TO_MEM;
 	rxconf.src_addr = dws->dma_addr;
 	rxconf.src_maxburst = LNW_DMA_MSIZE_16;
 	rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -169,7 +169,7 @@ static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
 	rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
 				&dws->rx_sgl,
 				1,
-				DMA_FROM_DEVICE,
+				DMA_DEV_TO_MEM,
 				DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP);
 	rxdesc->callback = dw_spi_dma_done;
 	rxdesc->callback_param = dws;

drivers/spi/spi-ep93xx.c

@@ -550,6 +550,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
 	struct dma_async_tx_descriptor *txd;
 	enum dma_slave_buswidth buswidth;
 	struct dma_slave_config conf;
+	enum dma_transfer_direction slave_dirn;
 	struct scatterlist *sg;
 	struct sg_table *sgt;
 	struct dma_chan *chan;
@@ -572,6 +573,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
 
 		conf.src_addr = espi->sspdr_phys;
 		conf.src_addr_width = buswidth;
+		slave_dirn = DMA_DEV_TO_MEM;
 	} else {
 		chan = espi->dma_tx;
 		buf = t->tx_buf;
@@ -579,6 +581,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
 
 		conf.dst_addr = espi->sspdr_phys;
 		conf.dst_addr_width = buswidth;
+		slave_dirn = DMA_MEM_TO_DEV;
 	}
 
 	ret = dmaengine_slave_config(chan, &conf);
@@ -630,7 +633,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir)
 		return ERR_PTR(-ENOMEM);
 
 	txd = chan->device->device_prep_slave_sg(chan, sgt->sgl, nents,
-						 dir, DMA_CTRL_ACK);
+						 slave_dirn, DMA_CTRL_ACK);
 	if (!txd) {
 		dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir);
 		return ERR_PTR(-ENOMEM);
@@ -978,7 +981,7 @@ static int ep93xx_spi_setup_dma(struct ep93xx_spi *espi)
 	dma_cap_set(DMA_SLAVE, mask);
 
 	espi->dma_rx_data.port = EP93XX_DMA_SSP;
-	espi->dma_rx_data.direction = DMA_FROM_DEVICE;
+	espi->dma_rx_data.direction = DMA_DEV_TO_MEM;
 	espi->dma_rx_data.name = "ep93xx-spi-rx";
 
 	espi->dma_rx = dma_request_channel(mask, ep93xx_spi_dma_filter,
@@ -989,7 +992,7 @@ static int ep93xx_spi_setup_dma(struct ep93xx_spi *espi)
 	}
 
 	espi->dma_tx_data.port = EP93XX_DMA_SSP;
-	espi->dma_tx_data.direction = DMA_TO_DEVICE;
+	espi->dma_tx_data.direction = DMA_MEM_TO_DEV;
 	espi->dma_tx_data.name = "ep93xx-spi-tx";
 
 	espi->dma_tx = dma_request_channel(mask, ep93xx_spi_dma_filter,

drivers/spi/spi-pl022.c

@@ -910,11 +910,11 @@ static int configure_dma(struct pl022 *pl022)
 {
 	struct dma_slave_config rx_conf = {
 		.src_addr = SSP_DR(pl022->phybase),
-		.direction = DMA_FROM_DEVICE,
+		.direction = DMA_DEV_TO_MEM,
 	};
 	struct dma_slave_config tx_conf = {
 		.dst_addr = SSP_DR(pl022->phybase),
-		.direction = DMA_TO_DEVICE,
+		.direction = DMA_MEM_TO_DEV,
 	};
 	unsigned int pages;
 	int ret;
@@ -1051,7 +1051,7 @@ static int configure_dma(struct pl022 *pl022)
 	rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
 				      pl022->sgt_rx.sgl,
 				      rx_sglen,
-				      DMA_FROM_DEVICE,
+				      DMA_DEV_TO_MEM,
 				      DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!rxdesc)
 		goto err_rxdesc;
@@ -1059,7 +1059,7 @@ static int configure_dma(struct pl022 *pl022)
 	txdesc = txchan->device->device_prep_slave_sg(txchan,
 				      pl022->sgt_tx.sgl,
 				      tx_sglen,
-				      DMA_TO_DEVICE,
+				      DMA_MEM_TO_DEV,
 				      DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!txdesc)
 		goto err_txdesc;

drivers/spi/spi-topcliff-pch.c

@@ -1051,7 +1051,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
 	}
 	sg = dma->sg_rx_p;
 	desc_rx = dma->chan_rx->device->device_prep_slave_sg(dma->chan_rx, sg,
-					num, DMA_FROM_DEVICE,
+					num, DMA_DEV_TO_MEM,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc_rx) {
 		dev_err(&data->master->dev, "%s:device_prep_slave_sg Failed\n",
@@ -1086,7 +1086,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
 	}
 	sg = dma->sg_tx_p;
 	desc_tx = dma->chan_tx->device->device_prep_slave_sg(dma->chan_tx,
-					sg, num, DMA_TO_DEVICE,
+					sg, num, DMA_MEM_TO_DEV,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc_tx) {
 		dev_err(&data->master->dev, "%s:device_prep_slave_sg Failed\n",

drivers/tty/serial/amba-pl011.c

@@ -268,7 +268,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
 	struct dma_slave_config tx_conf = {
 		.dst_addr = uap->port.mapbase + UART01x_DR,
 		.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
-		.direction = DMA_TO_DEVICE,
+		.direction = DMA_MEM_TO_DEV,
 		.dst_maxburst = uap->fifosize >> 1,
 	};
 	struct dma_chan *chan;
@@ -301,7 +301,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
 		struct dma_slave_config rx_conf = {
 			.src_addr = uap->port.mapbase + UART01x_DR,
 			.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
-			.direction = DMA_FROM_DEVICE,
+			.direction = DMA_DEV_TO_MEM,
 			.src_maxburst = uap->fifosize >> 1,
 		};
 
@@ -480,7 +480,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
 		return -EBUSY;
 	}
 
-	desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_TO_DEVICE,
+	desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV,
 					     DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
 		dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE);
@@ -676,7 +676,7 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
 		&uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
 	dma_dev = rxchan->device;
 	desc = rxchan->device->device_prep_slave_sg(rxchan, &sgbuf->sg, 1,
-					DMA_FROM_DEVICE,
+					DMA_DEV_TO_MEM,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	/*
 	 * If the DMA engine is busy and cannot prepare a

drivers/tty/serial/pch_uart.c

@@ -747,7 +747,7 @@ static int dma_handle_rx(struct eg20t_port *priv)
 	sg_dma_address(sg) = priv->rx_buf_dma;
 
 	desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx,
-			sg, 1, DMA_FROM_DEVICE,
+			sg, 1, DMA_DEV_TO_MEM,
 			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 
 	if (!desc)
@@ -906,7 +906,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv)
 	}
 
 	desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx,
-					priv->sg_tx_p, nent, DMA_TO_DEVICE,
+					priv->sg_tx_p, nent, DMA_MEM_TO_DEV,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
 		dev_err(priv->port.dev, "%s:device_prep_slave_sg Failed\n",

drivers/tty/serial/sh-sci.c

@@ -1207,7 +1207,7 @@ static void sci_submit_rx(struct sci_port *s)
 		struct dma_async_tx_descriptor *desc;
 
 		desc = chan->device->device_prep_slave_sg(chan,
-			sg, 1, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT);
+			sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
 
 		if (desc) {
 			s->desc_rx[i] = desc;
@@ -1322,7 +1322,7 @@ static void work_fn_tx(struct work_struct *work)
 	BUG_ON(!sg_dma_len(sg));
 
 	desc = chan->device->device_prep_slave_sg(chan,
-			sg, s->sg_len_tx, DMA_TO_DEVICE,
+			sg, s->sg_len_tx, DMA_MEM_TO_DEV,
 			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
 		/* switch to PIO */