Merge /spare/repo/linux-2.6/

CREDITS

@@ -2423,8 +2423,7 @@ S: Toronto, Ontario
 S: Canada
 
 N: Zwane Mwaikambo
-E: zwane@linuxpower.ca
-W: http://function.linuxpower.ca
+E: zwane@arm.linux.org.uk
 D: Various driver hacking
 D: Lowlevel x86 kernel hacking
 D: General debugging

Documentation/acpi-hotkey.txt

@@ -33,3 +33,6 @@ The result of the execution of this aml method is
 attached to /proc/acpi/hotkey/poll_method, which is dnyamically
 created.  Please use command "cat /proc/acpi/hotkey/polling_method" 
 to retrieve it.
+
+Note: Use cmdline "acpi_generic_hotkey" to over-ride
+loading any platform specific drivers.

Documentation/kernel-parameters.txt

@@ -159,6 +159,11 @@ running once the system is up.
 
 	acpi_fake_ecdt	[HW,ACPI] Workaround failure due to BIOS lacking ECDT
 
+	acpi_generic_hotkey [HW,ACPI]
+			Allow consolidated generic hotkey driver to
+			over-ride platform specific driver.
+			See also Documentation/acpi-hotkey.txt.
+
 	ad1816=		[HW,OSS]
 			Format: <io>,<irq>,<dma>,<dma2>
 			See also Documentation/sound/oss/AD1816.

Documentation/pci.txt

@@ -266,20 +266,6 @@ port an old driver to the new PCI interface.  They are no longer present
 in the kernel as they aren't compatible with hotplug or PCI domains or
 having sane locking.
 
-pcibios_present() and		Since ages, you don't need to test presence
-pci_present()			of PCI subsystem when trying to talk to it.
-				If it's not there, the list of PCI devices
-				is empty and all functions for searching for
-				devices just return NULL.
-pcibios_(read|write)_*		Superseded by their pci_(read|write)_*
-				counterparts.
-pcibios_find_*			Superseded by their pci_get_* counterparts.
-pci_for_each_dev()		Superseded by pci_get_device()
-pci_for_each_dev_reverse()	Superseded by pci_find_device_reverse()
-pci_for_each_bus()		Superseded by pci_find_next_bus()
 pci_find_device()		Superseded by pci_get_device()
 pci_find_subsys()		Superseded by pci_get_subsys()
 pci_find_slot()			Superseded by pci_get_slot()
-pcibios_find_class()		Superseded by pci_get_class()
-pci_find_class()		Superseded by pci_get_class()
-pci_(read|write)_*_nodev()	Superseded by pci_bus_(read|write)_*()

MAINTAINERS

@@ -784,7 +784,7 @@ DVB SUBSYSTEM AND DRIVERS
 P:	LinuxTV.org Project
 M: 	linux-dvb-maintainer@linuxtv.org
 L: 	linux-dvb@linuxtv.org (subscription required)
-W:	http://linuxtv.org/developer/dvb.xml
+W:	http://linuxtv.org/
 S:	Supported
 
 EATA-DMA SCSI DRIVER
@@ -1739,7 +1739,7 @@ S:	Maintained
 
 OPL3-SA2, SA3, and SAx DRIVER
 P:	Zwane Mwaikambo
-M:	zwane@commfireservices.com
+M:	zwane@arm.linux.org.uk
 L:	linux-sound@vger.kernel.org
 S:	Maintained
 
@@ -1825,6 +1825,12 @@ P:	Greg Kroah-Hartman
 M:	greg@kroah.com
 S:	Maintained
 
+PCIE HOTPLUG DRIVER
+P:	Kristen Carlson Accardi
+M:	kristen.c.accardi@intel.com
+L:	pcihpd-discuss@lists.sourceforge.net
+S:	Maintained
+
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	http://lists.infradead.org/mailman/listinfo/linux-pcmcia
@@ -1989,7 +1995,7 @@ S:	Maintained
 
 SC1200 WDT DRIVER
 P:	Zwane Mwaikambo
-M:	zwane@commfireservices.com
+M:	zwane@arm.linux.org.uk
 S:	Maintained
 
 SCHEDULER
@@ -2201,6 +2207,12 @@ W:	http://projects.buici.com/arm
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 S:	Maintained
 
+SHPC HOTPLUG DRIVER
+P:	Kristen Carlson Accardi
+M:	kristen.c.accardi@intel.com
+L:	pcihpd-discuss@lists.sourceforge.net
+S:	Maintained
+
 SPARC (sparc32):
 P:	William L. Irwin
 M:	wli@holomorphy.com

arch/arm/kernel/calls.S

@@ -327,6 +327,12 @@ __syscall_start:
 /* 310 */	.long	sys_request_key
 		.long	sys_keyctl
 		.long	sys_semtimedop
+/* vserver */	.long	sys_ni_syscall
+		.long	sys_ioprio_set
+/* 315 */	.long	sys_ioprio_get
+		.long	sys_inotify_init
+		.long	sys_inotify_add_watch
+		.long	sys_inotify_rm_watch
 __syscall_end:
 
 		.rept	NR_syscalls - (__syscall_end - __syscall_start) / 4

arch/arm/mach-s3c2410/s3c2410.c

@@ -18,6 +18,7 @@
  *     28-Sep-2004 BJD  Updates for new serial port bits
  *     04-Nov-2004 BJD  Updated UART configuration process
  *     10-Jan-2005 BJD  Removed s3c2410_clock_tick_rate
+ *     13-Aug-2005 DA   Removed UART from initial I/O mappings
 */
 
 #include <linux/kernel.h>
@@ -49,10 +50,9 @@ static struct map_desc s3c2410_iodesc[] __initdata = {
 	IODESC_ENT(USBHOST),
 	IODESC_ENT(CLKPWR),
 	IODESC_ENT(LCD),
-	IODESC_ENT(UART),
 	IODESC_ENT(TIMER),
 	IODESC_ENT(ADC),
-	IODESC_ENT(WATCHDOG)
+	IODESC_ENT(WATCHDOG),
 };
 
 static struct resource s3c_uart0_resource[] = {

arch/arm/mm/Kconfig

@@ -384,7 +384,7 @@ config CPU_DCACHE_DISABLE
 
 config CPU_DCACHE_WRITETHROUGH
 	bool "Force write through D-cache"
-	depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DISABLE_DCACHE
+	depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DCACHE_DISABLE
 	default y if CPU_ARM925T
 	help
 	  Say Y here to use the data cache in writethrough mode. Unless you

arch/arm/mm/proc-v6.S

@@ -105,7 +105,7 @@ ENTRY(cpu_v6_dcache_clean_area)
 ENTRY(cpu_v6_switch_mm)
 	mov	r2, #0
 	ldr	r1, [r1, #MM_CONTEXT_ID]	@ get mm->context.id
-	mcr     p15, 0, r2, c7, c5, 6           @ flush BTAC/BTB
+	mcr	p15, 0, r2, c7, c5, 6		@ flush BTAC/BTB
 	mcr	p15, 0, r2, c7, c10, 4		@ drain write buffer
 	mcr	p15, 0, r0, c2, c0, 0		@ set TTB 0
 	mcr	p15, 0, r1, c13, c0, 1		@ set context ID

arch/arm/nwfpe/softfloat.c

@@ -1602,9 +1602,7 @@ flag float32_le_quiet( float32 a, float32 b )
     if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
          || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
        ) {
-        if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
-        }
+        /* Do nothing, even if NaN as we're quiet */
         return 0;
     }
     aSign = extractFloat32Sign( a );
@@ -1629,9 +1627,7 @@ flag float32_lt_quiet( float32 a, float32 b )
     if (    ( ( extractFloat32Exp( a ) == 0xFF ) && extractFloat32Frac( a ) )
          || ( ( extractFloat32Exp( b ) == 0xFF ) && extractFloat32Frac( b ) )
        ) {
-        if ( float32_is_signaling_nan( a ) || float32_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
-        }
+        /* Do nothing, even if NaN as we're quiet */
         return 0;
     }
     aSign = extractFloat32Sign( a );
@@ -2493,9 +2489,7 @@ flag float64_le_quiet( float64 a, float64 b )
     if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
          || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
        ) {
-        if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
-        }
+        /* Do nothing, even if NaN as we're quiet */
         return 0;
     }
     aSign = extractFloat64Sign( a );
@@ -2520,9 +2514,7 @@ flag float64_lt_quiet( float64 a, float64 b )
     if (    ( ( extractFloat64Exp( a ) == 0x7FF ) && extractFloat64Frac( a ) )
          || ( ( extractFloat64Exp( b ) == 0x7FF ) && extractFloat64Frac( b ) )
        ) {
-        if ( float64_is_signaling_nan( a ) || float64_is_signaling_nan( b ) ) {
-            float_raise( float_flag_invalid );
-        }
+        /* Do nothing, even if NaN as we're quiet */
         return 0;
     }
     aSign = extractFloat64Sign( a );
@@ -3256,7 +3248,7 @@ flag floatx80_eq( floatx80 a, floatx80 b )
        ) {
         if (    floatx80_is_signaling_nan( a )
              || floatx80_is_signaling_nan( b ) ) {
-            roundData->exception |= float_flag_invalid;
+            float_raise( float_flag_invalid );
         }
         return 0;
     }
@@ -3286,7 +3278,7 @@ flag floatx80_le( floatx80 a, floatx80 b )
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        roundData->exception |= float_flag_invalid;
+        float_raise( float_flag_invalid );
         return 0;
     }
     aSign = extractFloatx80Sign( a );
@@ -3320,7 +3312,7 @@ flag floatx80_lt( floatx80 a, floatx80 b )
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        roundData->exception |= float_flag_invalid;
+        float_raise( float_flag_invalid );
         return 0;
     }
     aSign = extractFloatx80Sign( a );
@@ -3353,7 +3345,7 @@ flag floatx80_eq_signaling( floatx80 a, floatx80 b )
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        roundData->exception |= float_flag_invalid;
+        float_raise( float_flag_invalid );
         return 0;
     }
     return
@@ -3382,10 +3374,7 @@ flag floatx80_le_quiet( floatx80 a, floatx80 b )
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        if (    floatx80_is_signaling_nan( a )
-             || floatx80_is_signaling_nan( b ) ) {
-            roundData->exception |= float_flag_invalid;
-        }
+        /* Do nothing, even if NaN as we're quiet */
         return 0;
     }
     aSign = extractFloatx80Sign( a );
@@ -3419,10 +3408,7 @@ flag floatx80_lt_quiet( floatx80 a, floatx80 b )
          || (    ( extractFloatx80Exp( b ) == 0x7FFF )
               && (bits64) ( extractFloatx80Frac( b )<<1 ) )
        ) {
-        if (    floatx80_is_signaling_nan( a )
-             || floatx80_is_signaling_nan( b ) ) {
-            roundData->exception |= float_flag_invalid;
-        }
+        /* Do nothing, even if NaN as we're quiet */
         return 0;
     }
     aSign = extractFloatx80Sign( a );

arch/i386/kernel/apic.c

@@ -726,15 +726,11 @@ __setup("apic=", apic_set_verbosity);
 static int __init detect_init_APIC (void)
 {
 	u32 h, l, features;
-	extern void get_cpu_vendor(struct cpuinfo_x86*);
 
 	/* Disabled by kernel option? */
 	if (enable_local_apic < 0)
 		return -1;
 
-	/* Workaround for us being called before identify_cpu(). */
-	get_cpu_vendor(&boot_cpu_data);
-
 	switch (boot_cpu_data.x86_vendor) {
 	case X86_VENDOR_AMD:
 		if ((boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model > 1) ||

arch/ia64/Kconfig

@@ -392,15 +392,8 @@ menu "Bus options (PCI, PCMCIA)"
 config PCI
 	bool "PCI support"
 	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
-	  The PCI-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>, contains valuable
-	  information about which PCI hardware does work under Linux and which
-	  doesn't.
+	  Real IA-64 machines all have PCI/PCI-X/PCI Express busses.  Say Y
+	  here unless you are using a simulator without PCI support.
 
 config PCI_DOMAINS
 	bool

arch/ia64/configs/sn2_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10
-# Mon Jan 10 13:57:35 2005
+# Linux kernel version: 2.6.13-rc6
+# Tue Aug 16 14:40:41 2005
 #
 
 #
@@ -10,6 +10,7 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_CLEAN_COMPILE=y
 CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
 
 #
 # General setup
@@ -21,24 +22,26 @@ CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=20
 CONFIG_HOTPLUG=y
 CONFIG_KOBJECT_UEVENT=y
 # CONFIG_IKCONFIG is not set
+CONFIG_CPUSETS=y
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CPUSETS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SHMEM=y
 CONFIG_CC_ALIGN_FUNCTIONS=0
 CONFIG_CC_ALIGN_LABELS=0
 CONFIG_CC_ALIGN_LOOPS=0
 CONFIG_CC_ALIGN_JUMPS=0
 # CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
 
 #
 # Loadable module support
@@ -63,9 +66,12 @@ CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_TIME_INTERPOLATION=y
 CONFIG_EFI=y
 CONFIG_GENERIC_IOMAP=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_IA64_UNCACHED_ALLOCATOR=y
 # CONFIG_IA64_GENERIC is not set
 # CONFIG_IA64_DIG is not set
 # CONFIG_IA64_HP_ZX1 is not set
+# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
 CONFIG_IA64_SGI_SN2=y
 # CONFIG_IA64_HP_SIM is not set
 # CONFIG_ITANIUM is not set
@@ -74,6 +80,10 @@ CONFIG_MCKINLEY=y
 # CONFIG_IA64_PAGE_SIZE_8KB is not set
 CONFIG_IA64_PAGE_SIZE_16KB=y
 # CONFIG_IA64_PAGE_SIZE_64KB is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
 CONFIG_IA64_L1_CACHE_SHIFT=7
 CONFIG_NUMA=y
 CONFIG_VIRTUAL_MEM_MAP=y
@@ -81,11 +91,20 @@ CONFIG_HOLES_IN_ZONE=y
 CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
 # CONFIG_IA64_CYCLONE is not set
 CONFIG_IOSAPIC=y
+CONFIG_IA64_SGI_SN_XP=m
 CONFIG_FORCE_MAX_ZONEORDER=18
 CONFIG_SMP=y
 CONFIG_NR_CPUS=512
 # CONFIG_HOTPLUG_CPU is not set
+CONFIG_SCHED_SMT=y
 CONFIG_PREEMPT=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
 CONFIG_HAVE_DEC_LOCK=y
 CONFIG_IA32_SUPPORT=y
 CONFIG_COMPAT=y
@@ -105,6 +124,7 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management and ACPI
 #
+CONFIG_PM=y
 CONFIG_ACPI=y
 
 #
@@ -114,6 +134,7 @@ CONFIG_ACPI_BOOT=y
 CONFIG_ACPI_INTERPRETER=y
 # CONFIG_ACPI_BUTTON is not set
 CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_HOTKEY=m
 # CONFIG_ACPI_FAN is not set
 # CONFIG_ACPI_PROCESSOR is not set
 CONFIG_ACPI_NUMA=y
@@ -133,6 +154,7 @@ CONFIG_PCI_DOMAINS=y
 # CONFIG_PCI_MSI is not set
 CONFIG_PCI_LEGACY_PROC=y
 CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
 
 #
 # PCI Hotplug Support
@@ -141,7 +163,6 @@ CONFIG_HOTPLUG_PCI=y
 # CONFIG_HOTPLUG_PCI_FAKE is not set
 # CONFIG_HOTPLUG_PCI_ACPI is not set
 # CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
 # CONFIG_HOTPLUG_PCI_SHPC is not set
 CONFIG_HOTPLUG_PCI_SGI=y
 
@@ -151,8 +172,70 @@ CONFIG_HOTPLUG_PCI_SGI=y
 # CONFIG_PCCARD is not set
 
 #
-# PC-card bridges
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
 #
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
 
 #
 # Device Drivers
@@ -163,7 +246,7 @@ CONFIG_HOTPLUG_PCI_SGI=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 
 #
@@ -188,6 +271,7 @@ CONFIG_FW_LOADER=m
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
@@ -252,6 +336,7 @@ CONFIG_IDEDMA_PCI_AUTO=y
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -282,6 +367,7 @@ CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -315,24 +401,20 @@ CONFIG_SCSI_SATA=y
 # CONFIG_SCSI_ATA_PIIX is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_SX4 is not set
 # CONFIG_SCSI_SATA_SIL is not set
 # CONFIG_SCSI_SATA_SIS is not set
 # CONFIG_SCSI_SATA_ULI is not set
 # CONFIG_SCSI_SATA_VIA is not set
 CONFIG_SCSI_SATA_VITESSE=y
-# CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
 # CONFIG_SCSI_QLOGIC_FC is not set
 CONFIG_SCSI_QLOGIC_1280=y
 # CONFIG_SCSI_QLOGIC_1280_1040 is not set
@@ -342,6 +424,8 @@ CONFIG_SCSI_QLA22XX=y
 CONFIG_SCSI_QLA2300=y
 CONFIG_SCSI_QLA2322=y
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -364,11 +448,15 @@ CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
 CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
 
 #
 # Fusion MPT device support
 #
 CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
 CONFIG_FUSION_MAX_SGE=128
 CONFIG_FUSION_CTL=m
 
@@ -383,82 +471,13 @@ CONFIG_FUSION_CTL=m
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
+# Network device support
 #
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
 
 #
 # ARCnet devices
@@ -480,8 +499,10 @@ CONFIG_NETDEVICES=y
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 # CONFIG_R8169 is not set
+# CONFIG_SKGE is not set
 # CONFIG_SK98LIN is not set
 CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -512,6 +533,10 @@ CONFIG_S2IO=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 
 #
 # ISDN subsystem
@@ -540,14 +565,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
 #
 # Input Device Drivers
 #
@@ -557,6 +574,12 @@ CONFIG_SOUND_GAMEPORT=y
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
 #
 # Character devices
 #
@@ -568,9 +591,10 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_CYCLADES is not set
 # CONFIG_MOXA_SMARTIO is not set
 # CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
 # CONFIG_STALDRV is not set
 CONFIG_SGI_SNSC=y
 CONFIG_SGI_TIOCX=y
@@ -587,6 +611,7 @@ CONFIG_SGI_MBCS=m
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_SGI_L1_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
 CONFIG_SERIAL_SGI_IOC4=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
@@ -615,18 +640,30 @@ CONFIG_EFI_RTC=y
 CONFIG_RAW_DRIVER=m
 # CONFIG_HPET is not set
 CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
 CONFIG_MMTIMER=y
 
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
 #
 # I2C support
 #
 # CONFIG_I2C is not set
+# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
 
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+
 #
 # Misc devices
 #
@@ -660,6 +697,8 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # USB support
 #
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
 
@@ -669,9 +708,8 @@ CONFIG_USB=m
 # CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
 
 #
 # USB Host Controller Drivers
@@ -679,7 +717,10 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 CONFIG_USB_UHCI_HCD=m
 # CONFIG_USB_SL811_HCD is not set
 
@@ -710,12 +751,15 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_MOUSE is not set
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
 # CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
 # CONFIG_USB_EGALAX is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
 
 #
 # USB Imaging devices
@@ -740,6 +784,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
@@ -763,9 +808,12 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
 
 #
-# USB ATM/DSL drivers
+# USB DSL modem support
 #
 
 #
@@ -782,6 +830,7 @@ CONFIG_USB_HIDINPUT=y
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_VERBS=m
 CONFIG_INFINIBAND_MTHCA=m
 # CONFIG_INFINIBAND_MTHCA_DEBUG is not set
 CONFIG_INFINIBAND_IPOIB=m
@@ -799,6 +848,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
@@ -814,13 +864,19 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 CONFIG_REISERFS_FS_SECURITY=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
+
+#
+# XFS support
+#
 CONFIG_XFS_FS=y
+CONFIG_XFS_EXPORT=y
 CONFIG_XFS_RT=y
 CONFIG_XFS_QUOTA=y
 # CONFIG_XFS_SECURITY is not set
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 CONFIG_QUOTA=y
 # CONFIG_QFMT_V1 is not set
 # CONFIG_QFMT_V2 is not set
@@ -854,7 +910,6 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
 # CONFIG_DEVPTS_FS_XATTR is not set
 CONFIG_TMPFS=y
 CONFIG_TMPFS_XATTR=y
@@ -885,15 +940,18 @@ CONFIG_RAMFS=y
 #
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
 CONFIG_NFS_DIRECTIO=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
 CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=m
 CONFIG_SUNRPC_GSS=m
 CONFIG_RPCSEC_GSS_KRB5=m
@@ -980,6 +1038,9 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
 
 #
 # Profiling support
@@ -989,15 +1050,19 @@ CONFIG_ZLIB_DEFLATE=m
 #
 # Kernel hacking
 #
+# CONFIG_PRINTK_TIME is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=20
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set
+# CONFIG_KPROBES is not set
 CONFIG_IA64_GRANULE_16MB=y
 # CONFIG_IA64_GRANULE_64MB is not set
 # CONFIG_IA64_PRINT_HAZARDS is not set
@@ -1019,11 +1084,12 @@ CONFIG_CRYPTO=y
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
 CONFIG_CRYPTO_DES=m
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set

arch/ia64/configs/tiger_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc1-20050629
-# Wed Jun 29 15:28:12 2005
+# Linux kernel version: 2.6.13-rc6-tiger-smp
+# Wed Aug 17 10:19:51 2005
 #
 
 #
@@ -132,6 +132,7 @@ CONFIG_ACPI_BOOT=y
 CONFIG_ACPI_INTERPRETER=y
 CONFIG_ACPI_BUTTON=m
 # CONFIG_ACPI_VIDEO is not set
+# CONFIG_ACPI_HOTKEY is not set
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
 # CONFIG_ACPI_HOTPLUG_CPU is not set
@@ -169,6 +170,66 @@ CONFIG_HOTPLUG_PCI_ACPI=m
 #
 # CONFIG_PCCARD is not set
 
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
 #
 # Device Drivers
 #
@@ -178,7 +239,7 @@ CONFIG_HOTPLUG_PCI_ACPI=m
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=m
 # CONFIG_DEBUG_DRIVER is not set
 
 #
@@ -348,6 +409,7 @@ CONFIG_SCSI_QLA22XX=m
 CONFIG_SCSI_QLA2300=m
 CONFIG_SCSI_QLA2322=m
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -393,72 +455,8 @@ CONFIG_FUSION_CTL=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
+# Network device support
 #
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_ARPD=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
@@ -555,6 +553,10 @@ CONFIG_TIGON3=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
 
 #
 # ISDN subsystem
@@ -680,6 +682,7 @@ CONFIG_DRM_R128=m
 CONFIG_DRM_RADEON=m
 CONFIG_DRM_MGA=m
 CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
 CONFIG_RAW_DRIVER=m
 CONFIG_HPET=y
 # CONFIG_HPET_RTC_IRQ is not set
@@ -696,12 +699,19 @@ CONFIG_MAX_RAW_DEVS=256
 # I2C support
 #
 # CONFIG_I2C is not set
+# CONFIG_I2C_SENSOR is not set
 
 #
 # Dallas's 1-wire bus
 #
 # CONFIG_W1 is not set
 
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
 #
 # Misc devices
 #
@@ -800,6 +810,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_EGALAX is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
 
 #
 # USB Imaging devices
@@ -850,6 +861,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -910,6 +922,7 @@ CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y

arch/ia64/configs/zx1_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc1-20050629
-# Wed Jun 29 15:31:11 2005
+# Linux kernel version: 2.6.13-rc6
+# Wed Aug 17 10:02:43 2005
 #
 
 #
@@ -132,6 +132,7 @@ CONFIG_ACPI_BOOT=y
 CONFIG_ACPI_INTERPRETER=y
 CONFIG_ACPI_BUTTON=y
 CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_HOTKEY=m
 CONFIG_ACPI_FAN=y
 CONFIG_ACPI_PROCESSOR=y
 CONFIG_ACPI_THERMAL=y
@@ -168,6 +169,83 @@ CONFIG_HOTPLUG_PCI_ACPI=y
 #
 # CONFIG_PCCARD is not set
 
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_IP_TCPDIAG is not set
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+CONFIG_IP_NF_ARPTABLES=y
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
 #
 # Device Drivers
 #
@@ -349,6 +427,7 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_SCSI_QLA2300 is not set
 # CONFIG_SCSI_QLA2322 is not set
 # CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -362,9 +441,11 @@ CONFIG_SCSI_QLA2XXX=y
 #
 # Fusion MPT device support
 #
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=y
+CONFIG_FUSION_FC=y
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
 
 #
 # IEEE 1394 (FireWire) support
@@ -377,87 +458,8 @@ CONFIG_SCSI_QLA2XXX=y
 # CONFIG_I2O is not set
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
+# Network device support
 #
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-CONFIG_IP_NF_ARPTABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
@@ -555,6 +557,8 @@ CONFIG_TIGON3=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -659,6 +663,7 @@ CONFIG_DRM=y
 CONFIG_DRM_RADEON=y
 # CONFIG_DRM_MGA is not set
 # CONFIG_DRM_SIS is not set
+# CONFIG_DRM_VIA is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HPET is not set
 # CONFIG_HANGCHECK_TIMER is not set
@@ -706,47 +711,10 @@ CONFIG_I2C_ALGOPCF=y
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
 # CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_SENSOR is not set
 
 #
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-
-#
-# Other I2C Chip support
+# Miscellaneous I2C Chip support
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
@@ -766,6 +734,11 @@ CONFIG_I2C_ALGOPCF=y
 #
 # CONFIG_W1 is not set
 
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+
 #
 # Misc devices
 #
@@ -782,7 +755,6 @@ CONFIG_VIDEO_DEV=y
 #
 # Video Adapters
 #
-# CONFIG_TUNER_MULTI_I2C is not set
 # CONFIG_VIDEO_BT848 is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_SAA5246A is not set
@@ -1025,6 +997,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_EGALAX is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
 
 #
 # USB Imaging devices
@@ -1080,6 +1053,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
 
 #
 # USB DSL modem support
@@ -1121,6 +1095,7 @@ CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 
 #
 # XFS support
@@ -1128,6 +1103,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
+# CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y

arch/ia64/kernel/domain.c

@@ -341,7 +341,7 @@ next_sg:
 #endif
 
 	/* Attach the domains */
-	for_each_online_cpu(i) {
+	for_each_cpu_mask(i, *cpu_map) {
 		struct sched_domain *sd;
 #ifdef CONFIG_SCHED_SMT
 		sd = &per_cpu(cpu_domains, i);

arch/ia64/kernel/perfmon.c

@@ -4312,6 +4312,7 @@ pfm_context_load(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs)
 	DPRINT(("before cmpxchg() old_ctx=%p new_ctx=%p\n",
 		thread->pfm_context, ctx));
 
+	ret = -EBUSY;
 	old = ia64_cmpxchg(acq, &thread->pfm_context, NULL, ctx, sizeof(pfm_context_t *));
 	if (old != NULL) {
 		DPRINT(("load_pid [%d] already has a context\n", req->load_pid));

arch/ia64/kernel/salinfo.c

@@ -143,7 +143,8 @@ struct salinfo_data {
 
 static struct salinfo_data salinfo_data[ARRAY_SIZE(salinfo_log_name)];
 
-static spinlock_t data_lock, data_saved_lock;
+static DEFINE_SPINLOCK(data_lock);
+static DEFINE_SPINLOCK(data_saved_lock);
 
 /** salinfo_platform_oemdata - optional callback to decode oemdata from an error
  * record.

arch/ia64/sn/kernel/io_init.c

@@ -203,6 +203,7 @@ static void sn_fixup_ionodes(void)
 				continue;
 			}
 
+			spin_lock_init(&sn_flush_device_list->sfdl_flush_lock);
 			hubdev->hdi_flush_nasid_list.widget_p[widget] =
 			    sn_flush_device_list;
 		}

arch/ppc/syslib/ppc4xx_dma.c

@@ -620,6 +620,7 @@ ppc4xx_clr_dma_status(unsigned int dmanr)
 	return DMA_STATUS_GOOD;
 }
 
+#ifdef CONFIG_PPC4xx_EDMA
 /*
  * Enables the burst on the channel (BTEN bit in the control/count register)
  * Note:
@@ -685,6 +686,11 @@ ppc4xx_set_burst_size(unsigned int dmanr, unsigned int bsize)
 	return DMA_STATUS_GOOD;
 }
 
+EXPORT_SYMBOL(ppc4xx_enable_burst);
+EXPORT_SYMBOL(ppc4xx_disable_burst);
+EXPORT_SYMBOL(ppc4xx_set_burst_size);
+#endif /* CONFIG_PPC4xx_EDMA */
+
 EXPORT_SYMBOL(ppc4xx_init_dma_channel);
 EXPORT_SYMBOL(ppc4xx_get_channel_config);
 EXPORT_SYMBOL(ppc4xx_set_channel_priority);
@@ -703,6 +709,4 @@ EXPORT_SYMBOL(ppc4xx_enable_dma_interrupt);
 EXPORT_SYMBOL(ppc4xx_disable_dma_interrupt);
 EXPORT_SYMBOL(ppc4xx_get_dma_status);
 EXPORT_SYMBOL(ppc4xx_clr_dma_status);
-EXPORT_SYMBOL(ppc4xx_enable_burst);
-EXPORT_SYMBOL(ppc4xx_disable_burst);
-EXPORT_SYMBOL(ppc4xx_set_burst_size);
+

arch/ppc64/kernel/LparData.c

@@ -32,32 +32,12 @@
 /* The HvReleaseData is the root of the information shared between 
  * the hypervisor and Linux.  
  */
-
-/*
- * WARNING - magic here
- *
- * Ok, this is a horrid hack below, but marginally better than the
- * alternatives.  What we really want is just to initialize
- * hvReleaseData in C as in the #if 0 section here.  However, gcc
- * refuses to believe that (u32)&x is a constant expression, so will
- * not allow the xMsNucDataOffset field to be properly initialized.
- * So, we declare hvReleaseData in inline asm instead.  We use inline
- * asm, rather than a .S file, because the assembler won't generate
- * the necessary relocation for the LparMap either, unless that symbol
- * is declared in the same source file.  Finally, we put the asm in a
- * dummy, attribute-used function, instead of at file scope, because
- * file scope asms don't allow contraints.  We want to use the "i"
- * constraints to put sizeof() and offsetof() expressions in there,
- * because including asm/offsets.h in C code then stringifying causes
- * all manner of warnings.
- */
-#if 0
 struct HvReleaseData hvReleaseData = {
 	.xDesc = 0xc8a5d9c4,	/* "HvRD" ebcdic */
 	.xSize = sizeof(struct HvReleaseData),
 	.xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas),
 	.xSlicNacaAddr = &naca,		/* 64-bit Naca address */
-	.xMsNucDataOffset = (u32)((unsigned long)&xLparMap - KERNELBASE),
+	.xMsNucDataOffset = LPARMAP_PHYS,
 	.xFlags = HVREL_TAGSINACTIVE	/* tags inactive       */
 					/* 64 bit              */
 					/* shared processors   */
@@ -70,63 +50,6 @@ struct HvReleaseData hvReleaseData = {
 		0xa7, 0x40, 0xf2, 0x4b,
 		0xf4, 0x4b, 0xf6, 0xf4 },
 };
-#endif
-
-
-extern struct HvReleaseData hvReleaseData;
-
-static void __attribute_used__ hvReleaseData_wrapper(void)
-{
-	/* This doesn't appear to need any alignment (even 4 byte) */
-	asm volatile (
-		"	lparMapPhys = xLparMap - %3\n"
-		"	.data\n"
-		"	.globl	hvReleaseData\n"
-		"hvReleaseData:\n"
-		"	.long	0xc8a5d9c4\n"	/* xDesc */
-						/* "HvRD" in ebcdic */
-		"	.short	%0\n"		/* xSize */
-		"	.short	%1\n"		/* xVpdAreasPtrOffset */
-		"	.llong	naca\n"		/* xSlicNacaAddr */
-		"	.long	lparMapPhys\n"	/* xMsNucDataOffset */
-		"	.long	0\n"		/* xRsvd1 */
-		"	.short	%2\n"		/* xFlags */
-		"	.short	4\n"	/* xVrmIndex  - v5r2m0 */
-		"	.short	3\n"	/* xMinSupportedPlicVrmIndex - v5r1m0 */
-		"	.short	3\n"	/* xMinCompatablePlicVrmIndex - v5r1m0 */
-		"	.long	0xd38995a4\n"	/* xVrmName */
-		"	.long	0xa740f24b\n"	/*   "Linux 2.4.64" ebcdic */
-		"	.long	0xf44bf6f4\n"
-		"	. = hvReleaseData + %0\n"
-		"	.previous\n"
-		: : "i"(sizeof(hvReleaseData)),
-		"i"(offsetof(struct naca_struct, xItVpdAreas)),
-		"i"(HVREL_TAGSINACTIVE /* tags inactive, 64 bit, */
-				       /* shared processors, HMT allowed */
-		    | 6), /* TEMP: This allows non-GA drivers */
-		"i"(KERNELBASE)
-		);
-}
-
-struct LparMap __attribute__((aligned (16))) xLparMap = {
-	.xNumberEsids = HvEsidsToMap,
-	.xNumberRanges = HvRangesToMap,
-	.xSegmentTableOffs = STAB0_PAGE,
-
-	.xEsids = {
-		{ .xKernelEsid = GET_ESID(KERNELBASE),
-		  .xKernelVsid = KERNEL_VSID(KERNELBASE), },
-		{ .xKernelEsid = GET_ESID(VMALLOCBASE),
-		  .xKernelVsid = KERNEL_VSID(VMALLOCBASE), },
-	},
-
-	.xRanges = {
-		{ .xPages = HvPagesToMap,
-		  .xOffset = 0,
-		  .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT),
-		},
-	},
-};
 
 extern void system_reset_iSeries(void);
 extern void machine_check_iSeries(void);

arch/ppc64/kernel/Makefile

@@ -73,3 +73,8 @@ obj-$(CONFIG_ALTIVEC)		+= vecemu.o vector.o
 obj-$(CONFIG_KPROBES)		+= kprobes.o
 
 CFLAGS_ioctl32.o += -Ifs/
+
+ifeq ($(CONFIG_PPC_ISERIES),y)
+arch/ppc64/kernel/head.o: arch/ppc64/kernel/lparmap.s
+AFLAGS_head.o += -Iarch/ppc64/kernel
+endif

arch/ppc64/kernel/head.S

@@ -38,6 +38,7 @@
 #include <asm/cputable.h>
 #include <asm/setup.h>
 #include <asm/hvcall.h>
+#include <asm/iSeries/LparMap.h>
 
 #ifdef CONFIG_PPC_ISERIES
 #define DO_SOFT_DISABLE
@@ -679,6 +680,11 @@ hardware_interrupt_iSeries_masked:
 	.globl fwnmi_data_area
 fwnmi_data_area:
 
+#ifdef CONFIG_PPC_ISERIES
+	. = LPARMAP_PHYS
+#include "lparmap.s"
+#endif /* CONFIG_PPC_ISERIES */
+
 /*
  * Vectors for the FWNMI option.  Share common code.
  */

arch/ppc64/kernel/iommu.c

@@ -242,7 +242,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 	dma_addr_t dma_next = 0, dma_addr;
 	unsigned long flags;
 	struct scatterlist *s, *outs, *segstart;
-	int outcount;
+	int outcount, incount;
 	unsigned long handle;
 
 	BUG_ON(direction == DMA_NONE);
@@ -252,6 +252,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 
 	outs = s = segstart = &sglist[0];
 	outcount = 1;
+	incount = nelems;
 	handle = 0;
 
 	/* Init first segment length for backout at failure */
@@ -338,10 +339,10 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
 
 	DBG("mapped %d elements:\n", outcount);
 
-	/* For the sake of iommu_free_sg, we clear out the length in the
+	/* For the sake of iommu_unmap_sg, we clear out the length in the
 	 * next entry of the sglist if we didn't fill the list completely
 	 */
-	if (outcount < nelems) {
+	if (outcount < incount) {
 		outs++;
 		outs->dma_address = DMA_ERROR_CODE;
 		outs->dma_length = 0;

arch/ppc64/kernel/lparmap.c

@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2005  Stephen Rothwell  IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <asm/mmu.h>
+#include <asm/page.h>
+#include <asm/iSeries/LparMap.h>
+
+const struct LparMap __attribute__((__section__(".text"))) xLparMap = {
+	.xNumberEsids = HvEsidsToMap,
+	.xNumberRanges = HvRangesToMap,
+	.xSegmentTableOffs = STAB0_PAGE,
+
+	.xEsids = {
+		{ .xKernelEsid = GET_ESID(KERNELBASE),
+		  .xKernelVsid = KERNEL_VSID(KERNELBASE), },
+		{ .xKernelEsid = GET_ESID(VMALLOCBASE),
+		  .xKernelVsid = KERNEL_VSID(VMALLOCBASE), },
+	},
+
+	.xRanges = {
+		{ .xPages = HvPagesToMap,
+		  .xOffset = 0,
+		  .xVPN = KERNEL_VSID(KERNELBASE) << (SID_SHIFT - PAGE_SHIFT),
+		},
+	},
+};

arch/sh/kernel/entry.S

@@ -1145,5 +1145,10 @@ ENTRY(sys_call_table)
 	.long sys_add_key		/* 285 */
 	.long sys_request_key
 	.long sys_keyctl
+	.long sys_ioprio_set
+	.long sys_ioprio_get
+	.long sys_inotify_init		/* 290 */
+	.long sys_inotify_add_watch
+	.long sys_inotify_rm_watch
 
 /* End of entry.S */

arch/sh64/kernel/syscalls.S

@@ -342,4 +342,9 @@ sys_call_table:
 	.long sys_add_key
 	.long sys_request_key
 	.long sys_keyctl		/* 315 */
+	.long sys_ioprio_set
+	.long sys_ioprio_get
+	.long sys_inotify_init
+	.long sys_inotify_add_watch
+	.long sys_inotify_rm_watch	/* 320 */
 

arch/sparc64/kernel/us2e_cpufreq.c

@@ -88,7 +88,6 @@ static void frob_mem_refresh(int cpu_slowing_down,
 {
 	unsigned long old_refr_count, refr_count, mctrl;
 
-
 	refr_count  = (clock_tick * MCTRL0_REFR_INTERVAL);
 	refr_count /= (MCTRL0_REFR_CLKS_P_CNT * divisor * 1000000000UL);
 
@@ -230,6 +229,25 @@ static unsigned long estar_to_divisor(unsigned long estar)
 	return ret;
 }
 
+static unsigned int us2e_freq_get(unsigned int cpu)
+{
+	cpumask_t cpus_allowed;
+	unsigned long clock_tick, estar;
+
+	if (!cpu_online(cpu))
+		return 0;
+
+	cpus_allowed = current->cpus_allowed;
+	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+
+	clock_tick = sparc64_get_clock_tick(cpu) / 1000;
+	estar = read_hbreg(HBIRD_ESTAR_MODE_ADDR);
+
+	set_cpus_allowed(current, cpus_allowed);
+
+	return clock_tick / estar_to_divisor(estar);
+}
+
 static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index)
 {
 	unsigned long new_bits, new_freq;
@@ -243,7 +261,7 @@ static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index)
 	cpus_allowed = current->cpus_allowed;
 	set_cpus_allowed(current, cpumask_of_cpu(cpu));
 
-	new_freq = clock_tick = sparc64_get_clock_tick(cpu);
+	new_freq = clock_tick = sparc64_get_clock_tick(cpu) / 1000;
 	new_bits = index_to_estar_mode(index);
 	divisor = index_to_divisor(index);
 	new_freq /= divisor;
@@ -258,7 +276,8 @@ static void us2e_set_cpu_divider_index(unsigned int cpu, unsigned int index)
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
 	if (old_divisor != divisor)
-		us2e_transition(estar, new_bits, clock_tick, old_divisor, divisor);
+		us2e_transition(estar, new_bits, clock_tick * 1000,
+				old_divisor, divisor);
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
@@ -272,10 +291,8 @@ static int us2e_freq_target(struct cpufreq_policy *policy,
 	unsigned int new_index = 0;
 
 	if (cpufreq_frequency_table_target(policy,
-					      &us2e_freq_table[policy->cpu].table[0],
-					      target_freq,
-					      relation,
-					      &new_index))
+					   &us2e_freq_table[policy->cpu].table[0],
+					   target_freq, relation, &new_index))
 		return -EINVAL;
 
 	us2e_set_cpu_divider_index(policy->cpu, new_index);
@@ -292,7 +309,7 @@ static int us2e_freq_verify(struct cpufreq_policy *policy)
 static int __init us2e_freq_cpu_init(struct cpufreq_policy *policy)
 {
 	unsigned int cpu = policy->cpu;
-	unsigned long clock_tick = sparc64_get_clock_tick(cpu);
+	unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
 	struct cpufreq_frequency_table *table =
 		&us2e_freq_table[cpu].table[0];
 
@@ -351,9 +368,10 @@ static int __init us2e_freq_init(void)
 		memset(us2e_freq_table, 0,
 		       (NR_CPUS * sizeof(struct us2e_freq_percpu_info)));
 
+		driver->init = us2e_freq_cpu_init;
 		driver->verify = us2e_freq_verify;
 		driver->target = us2e_freq_target;
-		driver->init = us2e_freq_cpu_init;
+		driver->get = us2e_freq_get;
 		driver->exit = us2e_freq_cpu_exit;
 		driver->owner = THIS_MODULE,
 		strcpy(driver->name, "UltraSPARC-IIe");

arch/sparc64/kernel/us3_cpufreq.c

@@ -56,7 +56,7 @@ static void write_safari_cfg(unsigned long val)
 
 static unsigned long get_current_freq(unsigned int cpu, unsigned long safari_cfg)
 {
-	unsigned long clock_tick = sparc64_get_clock_tick(cpu);
+	unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
 	unsigned long ret;
 
 	switch (safari_cfg & SAFARI_CFG_DIV_MASK) {
@@ -76,6 +76,26 @@ static unsigned long get_current_freq(unsigned int cpu, unsigned long safari_cfg
 	return ret;
 }
 
+static unsigned int us3_freq_get(unsigned int cpu)
+{
+	cpumask_t cpus_allowed;
+	unsigned long reg;
+	unsigned int ret;
+
+	if (!cpu_online(cpu))
+		return 0;
+
+	cpus_allowed = current->cpus_allowed;
+	set_cpus_allowed(current, cpumask_of_cpu(cpu));
+
+	reg = read_safari_cfg();
+	ret = get_current_freq(cpu, reg);
+
+	set_cpus_allowed(current, cpus_allowed);
+
+	return ret;
+}
+
 static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index)
 {
 	unsigned long new_bits, new_freq, reg;
@@ -88,7 +108,7 @@ static void us3_set_cpu_divider_index(unsigned int cpu, unsigned int index)
 	cpus_allowed = current->cpus_allowed;
 	set_cpus_allowed(current, cpumask_of_cpu(cpu));
 
-	new_freq = sparc64_get_clock_tick(cpu);
+	new_freq = sparc64_get_clock_tick(cpu) / 1000;
 	switch (index) {
 	case 0:
 		new_bits = SAFARI_CFG_DIV_1;
@@ -150,7 +170,7 @@ static int us3_freq_verify(struct cpufreq_policy *policy)
 static int __init us3_freq_cpu_init(struct cpufreq_policy *policy)
 {
 	unsigned int cpu = policy->cpu;
-	unsigned long clock_tick = sparc64_get_clock_tick(cpu);
+	unsigned long clock_tick = sparc64_get_clock_tick(cpu) / 1000;
 	struct cpufreq_frequency_table *table =
 		&us3_freq_table[cpu].table[0];
 
@@ -206,9 +226,10 @@ static int __init us3_freq_init(void)
 		memset(us3_freq_table, 0,
 		       (NR_CPUS * sizeof(struct us3_freq_percpu_info)));
 
+		driver->init = us3_freq_cpu_init;
 		driver->verify = us3_freq_verify;
 		driver->target = us3_freq_target;
-		driver->init = us3_freq_cpu_init;
+		driver->get = us3_freq_get;
 		driver->exit = us3_freq_cpu_exit;
 		driver->owner = THIS_MODULE,
 		strcpy(driver->name, "UltraSPARC-III");

arch/um/kernel/skas/process.c

@@ -61,7 +61,11 @@ void wait_stub_done(int pid, int sig, char * fname)
 
                 CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
         } while((n >= 0) && WIFSTOPPED(status) &&
-                (WSTOPSIG(status) == SIGVTALRM));
+                ((WSTOPSIG(status) == SIGVTALRM) ||
+		 /* running UML inside a detached screen can cause
+		  * SIGWINCHes
+		  */
+		 (WSTOPSIG(status) == SIGWINCH)));
 
         if((n < 0) || !WIFSTOPPED(status) ||
            (WSTOPSIG(status) != SIGUSR1 && WSTOPSIG(status) != SIGTRAP)){

arch/um/os-Linux/elf_aux.c

@@ -9,7 +9,6 @@
  */
 #include <elf.h>
 #include <stddef.h>
-#include <asm/elf.h>
 #include "init.h"
 #include "elf_user.h"
 #include "mem_user.h"

arch/x86_64/kernel/smpboot.c

@@ -334,7 +334,7 @@ static void __cpuinit tsc_sync_wait(void)
 {
 	if (notscsync || !cpu_has_tsc)
 		return;
-	sync_tsc(boot_cpu_id);
+	sync_tsc(0);
 }
 
 static __init int notscsync_setup(char *s)

drivers/acpi/motherboard.c

@@ -43,7 +43,7 @@ ACPI_MODULE_NAME		("acpi_motherboard")
  */
 #define IS_RESERVED_ADDR(base, len) \
 	(((len) > 0) && ((base) > 0) && ((base) + (len) < IO_SPACE_LIMIT) \
-	&& ((base) + (len) > 0x1000))
+	&& ((base) + (len) > PCIBIOS_MIN_IO))
 
 /*
  * Clearing the flag (IORESOURCE_BUSY) allows drivers to use

drivers/acpi/osl.c

@@ -71,7 +71,7 @@ EXPORT_SYMBOL(acpi_in_debugger);
 extern char line_buf[80];
 #endif /*ENABLE_DEBUGGER*/
 
-int acpi_specific_hotkey_enabled;
+int acpi_specific_hotkey_enabled = TRUE;
 EXPORT_SYMBOL(acpi_specific_hotkey_enabled);
 
 static unsigned int acpi_irq_irq;
@@ -1162,11 +1162,11 @@ __setup("acpi_wake_gpes_always_on", acpi_wake_gpes_always_on_setup);
 int __init
 acpi_hotkey_setup(char *str)
 {
-	acpi_specific_hotkey_enabled = TRUE;
+	acpi_specific_hotkey_enabled = FALSE;
 	return 1;
 }
 
-__setup("acpi_specific_hotkey", acpi_hotkey_setup);
+__setup("acpi_generic_hotkey", acpi_hotkey_setup);
 
 /*
  * max_cstate is defined in the base kernel so modules can

drivers/base/bus.c

@@ -180,7 +180,9 @@ static ssize_t driver_bind(struct device_driver *drv,
 		up(&dev->sem);
 		put_device(dev);
 	}
-	return err;
+	if (err)
+		return err;
+	return count;
 }
 static DRIVER_ATTR(bind, S_IWUSR, NULL, driver_bind);
 

drivers/base/class.c

@@ -299,6 +299,11 @@ static void class_dev_release(struct kobject * kobj)
 
 	pr_debug("device class '%s': release.\n", cd->class_id);
 
+	if (cd->devt_attr) {
+		kfree(cd->devt_attr);
+		cd->devt_attr = NULL;
+	}
+
 	if (cls->release)
 		cls->release(cd);
 	else {
@@ -591,11 +596,8 @@ void class_device_del(struct class_device *class_dev)
 
 	if (class_dev->dev)
 		sysfs_remove_link(&class_dev->kobj, "device");
-	if (class_dev->devt_attr) {
+	if (class_dev->devt_attr)
 		class_device_remove_file(class_dev, class_dev->devt_attr);
-		kfree(class_dev->devt_attr);
-		class_dev->devt_attr = NULL;
-	}
 	class_device_remove_attrs(class_dev);
 
 	kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE);

drivers/char/mem.c

@@ -261,7 +261,11 @@ static int mmap_mem(struct file * file, struct vm_area_struct * vma)
 
 static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
 {
-        unsigned long long val;
+	unsigned long pfn;
+
+	/* Turn a kernel-virtual address into a physical page frame */
+	pfn = __pa((u64)vma->vm_pgoff << PAGE_SHIFT) >> PAGE_SHIFT;
+
 	/*
 	 * RED-PEN: on some architectures there is more mapped memory
 	 * than available in mem_map which pfn_valid checks
@@ -269,10 +273,10 @@ static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
 	 *
 	 * RED-PEN: vmalloc is not supported right now.
 	 */
-	if (!pfn_valid(vma->vm_pgoff))
+	if (!pfn_valid(pfn))
 		return -EIO;
-	val = (u64)vma->vm_pgoff << PAGE_SHIFT;
-	vma->vm_pgoff = __pa(val) >> PAGE_SHIFT;
+
+	vma->vm_pgoff = pfn;
 	return mmap_mem(file, vma);
 }
 

drivers/ide/Kconfig

@@ -764,6 +764,7 @@ config BLK_DEV_IDE_PMAC_ATA100FIRST
 config BLK_DEV_IDEDMA_PMAC
 	bool "PowerMac IDE DMA support"
 	depends on BLK_DEV_IDE_PMAC
+	select BLK_DEV_IDEDMA_PCI
 	help
 	  This option allows the driver for the built-in IDE controller on
 	  Power Macintoshes and PowerBooks to use DMA (direct memory access)

drivers/ide/ide-floppy.c

@@ -317,7 +317,7 @@ typedef struct ide_floppy_obj {
 	unsigned long flags;
 } idefloppy_floppy_t;
 
-#define IDEFLOPPY_TICKS_DELAY	3	/* default delay for ZIP 100 */
+#define IDEFLOPPY_TICKS_DELAY	HZ/20	/* default delay for ZIP 100 (50ms) */
 
 /*
  *	Floppy flag bits values.

drivers/ide/pci/generic.c

@@ -173,6 +173,12 @@ static ide_pci_device_t generic_chipsets[] __devinitdata = {
 		.channels	= 2,
 		.autodma	= NOAUTODMA,
 		.bootable	= ON_BOARD,
+	},{	/* 14 */
+		.name		= "Revolution",
+		.init_hwif	= init_hwif_generic,
+		.channels	= 2,
+		.autodma	= AUTODMA,
+		.bootable	= OFF_BOARD,
 	}
 };
 
@@ -231,6 +237,7 @@ static struct pci_device_id generic_pci_tbl[] = {
 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11},
 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12},
 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13},
+	{ PCI_VENDOR_ID_NETCELL,PCI_DEVICE_ID_REVOLUTION,          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14},
 	/* Must come last. If you add entries adjust this table appropriately and the init_one code */
 	{ PCI_ANY_ID,		PCI_ANY_ID,			   PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0},
 	{ 0, },

drivers/ide/pci/serverworks.c

@@ -21,6 +21,9 @@
  *
  *   CSB6: `Champion South Bridge' IDE Interface (optional: third channel)
  *
+ *   HT1000: AKA BCM5785 - Hypertransport Southbridge for Opteron systems. IDE
+ *   controller same as the CSB6. Single channel ATA100 only.
+ *
  * Documentation:
  *	Available under NDA only. Errata info very hard to get.
  *
@@ -71,6 +74,8 @@ static u8 svwks_ratemask (ide_drive_t *drive)
 	if (!svwks_revision)
 		pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
 
+	if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
+		return 2;
 	if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
 		u32 reg = 0;
 		if (isa_dev)
@@ -109,6 +114,7 @@ static u8 svwks_csb_check (struct pci_dev *dev)
 		case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
 		case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
 		case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
+		case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
 			return 1;
 		default:
 			break;
@@ -438,6 +444,13 @@ static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const cha
 			btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
 		pci_write_config_byte(dev, 0x5A, btr);
 	}
+	/* Setup HT1000 SouthBridge Controller - Single Channel Only */
+	else if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) {
+		pci_read_config_byte(dev, 0x5A, &btr);
+		btr &= ~0x40;
+		btr |= 0x3;
+		pci_write_config_byte(dev, 0x5A, btr);
+	}
 
 	return (dev->irq) ? dev->irq : 0;
 }
@@ -629,6 +642,15 @@ static ide_pci_device_t serverworks_chipsets[] __devinitdata = {
 		.channels	= 1,	/* 2 */
 		.autodma	= AUTODMA,
 		.bootable	= ON_BOARD,
+	},{	/* 4 */
+		.name		= "SvrWks HT1000",
+		.init_setup	= init_setup_svwks,
+		.init_chipset	= init_chipset_svwks,
+		.init_hwif	= init_hwif_svwks,
+		.init_dma	= init_dma_svwks,
+		.channels	= 1,	/* 2 */
+		.autodma	= AUTODMA,
+		.bootable	= ON_BOARD,
 	}
 };
 
@@ -653,6 +675,7 @@ static struct pci_device_id svwks_pci_tbl[] = {
 	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
 	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
 	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
+	{ PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);

drivers/ide/ppc/pmac.c

@@ -1664,7 +1664,7 @@ static struct macio_driver pmac_ide_macio_driver =
 };
 
 static struct pci_device_id pmac_ide_pci_match[] = {
-	{ PCI_VENDOR_ID_APPLE, PCI_DEVIEC_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_IPID_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_K2_ATA100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
 	{ PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_SH_ATA,

drivers/ide/setup-pci.c

@@ -229,6 +229,7 @@ second_chance_to_dma:
 			case PCI_DEVICE_ID_AMD_VIPER_7409:
 			case PCI_DEVICE_ID_CMD_643:
 			case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
+			case PCI_DEVICE_ID_REVOLUTION:
 				simplex_stat = hwif->INB(dma_base + 2);
 				hwif->OUTB((simplex_stat&0x60),(dma_base + 2));
 				simplex_stat = hwif->INB(dma_base + 2);

drivers/md/md.c

@@ -623,6 +623,7 @@ static int super_90_validate(mddev_t *mddev, mdk_rdev_t *rdev)
 		mddev->raid_disks = sb->raid_disks;
 		mddev->size = sb->size;
 		mddev->events = md_event(sb);
+		mddev->bitmap_offset = 0;
 
 		if (sb->state & (1<<MD_SB_CLEAN))
 			mddev->recovery_cp = MaxSector;
@@ -938,6 +939,7 @@ static int super_1_validate(mddev_t *mddev, mdk_rdev_t *rdev)
 		mddev->raid_disks = le32_to_cpu(sb->raid_disks);
 		mddev->size = le64_to_cpu(sb->size)/2;
 		mddev->events = le64_to_cpu(sb->events);
+		mddev->bitmap_offset = 0;
 		
 		mddev->recovery_cp = le64_to_cpu(sb->resync_offset);
 		memcpy(mddev->uuid, sb->set_uuid, 16);
@@ -1824,6 +1826,7 @@ static int do_md_stop(mddev_t * mddev, int ro)
 		fput(mddev->bitmap_file);
 		mddev->bitmap_file = NULL;
 	}
+	mddev->bitmap_offset = 0;
 
 	/*
 	 * Free resources if final stop

drivers/net/8139cp.c

@@ -1897,6 +1897,7 @@ static int cp_resume (struct pci_dev *pdev)
 {
 	struct net_device *dev;
 	struct cp_private *cp;
+	unsigned long flags;
 
 	dev = pci_get_drvdata (pdev);
 	cp  = netdev_priv(dev);
@@ -1910,6 +1911,12 @@ static int cp_resume (struct pci_dev *pdev)
 	
 	cp_init_hw (cp);
 	netif_start_queue (dev);
+
+	spin_lock_irqsave (&cp->lock, flags);
+
+	mii_check_media(&cp->mii_if, netif_msg_link(cp), FALSE);
+
+	spin_unlock_irqrestore (&cp->lock, flags);
 	
 	return 0;
 }

drivers/net/dm9000.c

@@ -48,6 +48,10 @@
  *                        net_device_stats
  *                      * introduced tx_timeout function
  *                      * reworked locking
+ *
+ *	  01-Jul-2005   Ben Dooks <ben@simtec.co.uk>
+ *			* fixed spinlock call without pointer
+ *			* ensure spinlock is initialised
  */
 
 #include <linux/module.h>
@@ -148,7 +152,6 @@ static int dm9000_probe(struct device *);
 static int dm9000_open(struct net_device *);
 static int dm9000_start_xmit(struct sk_buff *, struct net_device *);
 static int dm9000_stop(struct net_device *);
-static int dm9000_do_ioctl(struct net_device *, struct ifreq *, int);
 
 
 static void dm9000_timer(unsigned long);
@@ -322,7 +325,7 @@ static void dm9000_timeout(struct net_device *dev)
 
 	/* Save previous register address */
 	reg_save = readb(db->io_addr);
-	spin_lock_irqsave(db->lock,flags);
+	spin_lock_irqsave(&db->lock,flags);
 
 	netif_stop_queue(dev);
 	dm9000_reset(db);
@@ -333,7 +336,7 @@ static void dm9000_timeout(struct net_device *dev)
 
 	/* Restore previous register address */
 	writeb(reg_save, db->io_addr);
-	spin_unlock_irqrestore(db->lock,flags);
+	spin_unlock_irqrestore(&db->lock,flags);
 }
 
 
@@ -387,8 +390,6 @@ dm9000_probe(struct device *dev)
 	int i;
 	u32 id_val;
 
-	printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
-
 	/* Init network device */
 	ndev = alloc_etherdev(sizeof (struct board_info));
 	if (!ndev) {
@@ -405,6 +406,8 @@ dm9000_probe(struct device *dev)
 	db = (struct board_info *) ndev->priv;
 	memset(db, 0, sizeof (*db));
 
+	spin_lock_init(&db->lock);
+
 	if (pdev->num_resources < 2) {
 		ret = -ENODEV;
 		goto out;
@@ -541,7 +544,6 @@ dm9000_probe(struct device *dev)
 	ndev->stop		 = &dm9000_stop;
 	ndev->get_stats		 = &dm9000_get_stats;
 	ndev->set_multicast_list = &dm9000_hash_table;
-	ndev->do_ioctl		 = &dm9000_do_ioctl;
 
 #ifdef DM9000_PROGRAM_EEPROM
 	program_eeprom(db);
@@ -612,7 +614,7 @@ dm9000_open(struct net_device *dev)
 
 	/* set and active a timer process */
 	init_timer(&db->timer);
-	db->timer.expires  = DM9000_TIMER_WUT * 2;
+	db->timer.expires  = DM9000_TIMER_WUT;
 	db->timer.data     = (unsigned long) dev;
 	db->timer.function = &dm9000_timer;
 	add_timer(&db->timer);
@@ -845,15 +847,6 @@ dm9000_get_stats(struct net_device *dev)
 	return &db->stats;
 }
 
-/*
- *  Process the upper socket ioctl command
- */
-static int
-dm9000_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
-	PRINTK1("entering %s\n",__FUNCTION__);
-	return 0;
-}
 
 /*
  *  A periodic timer routine
@@ -864,21 +857,11 @@ dm9000_timer(unsigned long data)
 {
 	struct net_device *dev = (struct net_device *) data;
 	board_info_t *db = (board_info_t *) dev->priv;
-	u8 reg_save;
-	unsigned long flags;
 
 	PRINTK3("dm9000_timer()\n");
 
-	spin_lock_irqsave(db->lock,flags);
-	/* Save previous register address */
-	reg_save = readb(db->io_addr);
-
 	mii_check_media(&db->mii, netif_msg_link(db), 0);
 
-	/* Restore previous register address */
-	writeb(reg_save, db->io_addr);
-	spin_unlock_irqrestore(db->lock,flags);
-
 	/* Set timer again */
 	db->timer.expires = DM9000_TIMER_WUT;
 	add_timer(&db->timer);
@@ -1098,9 +1081,14 @@ dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
 {
 	board_info_t *db = (board_info_t *) dev->priv;
 	unsigned long flags;
+	unsigned int reg_save;
 	int ret;
 
 	spin_lock_irqsave(&db->lock,flags);
+
+	/* Save previous register address */
+	reg_save = readb(db->io_addr);
+
 	/* Fill the phyxcer register into REG_0C */
 	iow(db, DM9000_EPAR, DM9000_PHY | reg);
 
@@ -1111,6 +1099,9 @@ dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg)
 	/* The read data keeps on REG_0D & REG_0E */
 	ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL);
 
+	/* restore the previous address */
+	writeb(reg_save, db->io_addr);
+
 	spin_unlock_irqrestore(&db->lock,flags);
 
 	return ret;
@@ -1124,9 +1115,13 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value)
 {
 	board_info_t *db = (board_info_t *) dev->priv;
 	unsigned long flags;
+	unsigned long reg_save;
 
 	spin_lock_irqsave(&db->lock,flags);
 
+	/* Save previous register address */
+	reg_save = readb(db->io_addr);
+
 	/* Fill the phyxcer register into REG_0C */
 	iow(db, DM9000_EPAR, DM9000_PHY | reg);
 
@@ -1138,6 +1133,9 @@ dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value)
 	udelay(500);		/* Wait write complete */
 	iow(db, DM9000_EPCR, 0x0);	/* Clear phyxcer write command */
 
+	/* restore the previous address */
+	writeb(reg_save, db->io_addr);
+
 	spin_unlock_irqrestore(&db->lock,flags);
 }
 
@@ -1202,6 +1200,8 @@ static struct device_driver dm9000_driver = {
 static int __init
 dm9000_init(void)
 {
+	printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME);
+
 	return driver_register(&dm9000_driver);	/* search board and register */
 }
 

drivers/net/e1000/e1000_main.c

@@ -3789,6 +3789,7 @@ e1000_netpoll(struct net_device *netdev)
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	disable_irq(adapter->pdev->irq);
 	e1000_intr(adapter->pdev->irq, netdev, NULL);
+	e1000_clean_tx_irq(adapter);
 	enable_irq(adapter->pdev->irq);
 }
 #endif

drivers/net/ioc3-eth.c

@@ -499,7 +499,7 @@ static int ioc3_mdio_read(struct net_device *dev, int phy, int reg)
 	ioc3_w_micr((phy << MICR_PHYADDR_SHIFT) | reg | MICR_READTRIG);
 	while (ioc3_r_micr() & MICR_BUSY);
 
-	return ioc3_r_micr() & MIDR_DATA_MASK;
+	return ioc3_r_midr_r() & MIDR_DATA_MASK;
 }
 
 static void ioc3_mdio_write(struct net_device *dev, int phy, int reg, int data)
@@ -1291,7 +1291,6 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	dev->features		= NETIF_F_IP_CSUM;
 #endif
 
-	ioc3_setup_duplex(ip);
 	sw_physid1 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID1);
 	sw_physid2 = ioc3_mdio_read(dev, ip->mii.phy_id, MII_PHYSID2);
 
@@ -1300,6 +1299,7 @@ static int ioc3_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto out_stop;
 
 	mii_check_media(&ip->mii, 1, 1);
+	ioc3_setup_duplex(ip);
 
 	vendor = (sw_physid1 << 12) | (sw_physid2 >> 4);
 	model  = (sw_physid2 >> 4) & 0x3f;
@@ -1524,7 +1524,7 @@ static void ioc3_get_drvinfo (struct net_device *dev,
 	struct ethtool_drvinfo *info)
 {
 	struct ioc3_private *ip = netdev_priv(dev);
-                                                                                
+
         strcpy (info->driver, IOC3_NAME);
         strcpy (info->version, IOC3_VERSION);
         strcpy (info->bus_info, pci_name(ip->pdev));
@@ -1550,7 +1550,7 @@ static int ioc3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	spin_lock_irq(&ip->ioc3_lock);
 	rc = mii_ethtool_sset(&ip->mii, cmd);
 	spin_unlock_irq(&ip->ioc3_lock);
-                                                                        
+
 	return rc;
 }
 

drivers/net/loopback.c

@@ -220,7 +220,7 @@ struct net_device loopback_dev = {
 	.ethtool_ops		= &loopback_ethtool_ops,
 };
 
-/* Setup and register the of the LOOPBACK device. */
+/* Setup and register the loopback device. */
 int __init loopback_init(void)
 {
 	struct net_device_stats *stats;

drivers/pci/hotplug/pciehp.h

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 #ifndef _PCIEHP_H

drivers/pci/hotplug/pciehp_core.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/pciehp_ctrl.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/pciehp_hpc.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/pciehp_pci.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/pciehprm.h

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/pciehprm_acpi.c

@@ -20,7 +20,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <dely.l.sy@intel.com>
+ * Send feedback to <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/pciehprm_nonacpi.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/pciehprm_nonacpi.h

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchp.h

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
  *
  */
 #ifndef _SHPCHP_H

drivers/pci/hotplug/shpchp_core.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchp_ctrl.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchp_hpc.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchp_pci.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchprm.h

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchprm_acpi.c

@@ -20,7 +20,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <dely.l.sy@intel.com>
+ * Send feedback to <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchprm_legacy.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchprm_legacy.h

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchprm_nonacpi.c

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/hotplug/shpchprm_nonacpi.h

@@ -23,7 +23,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
- * Send feedback to <greg@kroah.com>, <dely.l.sy@intel.com>
+ * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
  *
  */
 

drivers/pci/msi.c

@@ -453,7 +453,7 @@ static void enable_msi_mode(struct pci_dev *dev, int pos, int type)
 	}
 }
 
-static void disable_msi_mode(struct pci_dev *dev, int pos, int type)
+void disable_msi_mode(struct pci_dev *dev, int pos, int type)
 {
 	u16 control;
 
@@ -699,6 +699,9 @@ int pci_enable_msi(struct pci_dev* dev)
 	if (!pci_msi_enable || !dev)
  		return status;
 
+	if (dev->no_msi)
+		return status;
+
 	temp = dev->irq;
 
 	if ((status = msi_init()) < 0)

drivers/pci/pci.h

@@ -47,6 +47,12 @@ extern int pci_msi_quirk;
 #define pci_msi_quirk 0
 #endif
 
+#ifdef CONFIG_PCI_MSI
+void disable_msi_mode(struct pci_dev *dev, int pos, int type);
+#else
+static inline void disable_msi_mode(struct pci_dev *dev, int pos, int type) { }
+#endif
+
 extern int pcie_mch_quirk;
 extern struct device_attribute pci_dev_attrs[];
 extern struct class_device_attribute class_device_attr_cpuaffinity;

drivers/pci/quirks.c

@@ -1291,6 +1291,27 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_E7520_MCH,	quir
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_E7320_MCH,	quirk_pcie_mch );
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_E7525_MCH,	quirk_pcie_mch );
 
+
+/*
+ * It's possible for the MSI to get corrupted if shpc and acpi
+ * are used together on certain PXH-based systems.
+ */
+static void __devinit quirk_pcie_pxh(struct pci_dev *dev)
+{
+	disable_msi_mode(dev, pci_find_capability(dev, PCI_CAP_ID_MSI),
+					PCI_CAP_ID_MSI);
+	dev->no_msi = 1;
+
+	printk(KERN_WARNING "PCI: PXH quirk detected, "
+		"disabling MSI for SHPC device\n");
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXHD_0,	quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXHD_1,	quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXH_0,	quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXH_1,	quirk_pcie_pxh);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_PXHV,	quirk_pcie_pxh);
+
+
 static void __devinit quirk_netmos(struct pci_dev *dev)
 {
 	unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;

drivers/pnp/card.c

@@ -312,6 +312,8 @@ found:
 	if (drv->link.driver.probe) {
 		if (drv->link.driver.probe(&dev->dev)) {
 			dev->dev.driver = NULL;
+			dev->card_link = NULL;
+			up_write(&dev->dev.bus->subsys.rwsem);
 			return NULL;
 		}
 	}

drivers/scsi/dc395x.c

@@ -183,7 +183,7 @@
  * cross a page boundy.
  */
 #define SEGMENTX_LEN	(sizeof(struct SGentry)*DC395x_MAX_SG_LISTENTRY)
-#define VIRTX_LEN	(sizeof(void *) * DC395x_MAX_SG_LISTENTRY)
+
 
 struct SGentry {
 	u32 address;		/* bus! address */
@@ -235,7 +235,6 @@ struct ScsiReqBlk {
 	u8 sg_count;			/* No of HW sg entries for this request */
 	u8 sg_index;			/* Index of HW sg entry for this request */
 	u32 total_xfer_length;		/* Total number of bytes remaining to be transfered */
-	void **virt_map;
 	unsigned char *virt_addr;	/* Virtual address of current transfer position */
 
 	/*
@@ -1022,14 +1021,14 @@ static void build_srb(struct scsi_cmnd *cmd, struct DeviceCtlBlk *dcb,
 			reqlen, cmd->request_buffer, cmd->use_sg,
 			srb->sg_count);
 
+		srb->virt_addr = page_address(sl->page);
 		for (i = 0; i < srb->sg_count; i++) {
-			u32 seglen = (u32)sg_dma_len(sl + i);
-			sgp[i].address = (u32)sg_dma_address(sl + i);
+			u32 busaddr = (u32)sg_dma_address(&sl[i]);
+			u32 seglen = (u32)sl[i].length;
+			sgp[i].address = busaddr;
 			sgp[i].length = seglen;
 			srb->total_xfer_length += seglen;
-			srb->virt_map[i] = kmap(sl[i].page);
 		}
-		srb->virt_addr = srb->virt_map[0];
 		sgp += srb->sg_count - 1;
 
 		/*
@@ -1976,7 +1975,6 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
 	int segment = cmd->use_sg;
 	u32 xferred = srb->total_xfer_length - left; /* bytes transfered */
 	struct SGentry *psge = srb->segment_x + srb->sg_index;
-	void **virt = srb->virt_map;
 
 	dprintkdbg(DBG_0,
 		"sg_update_list: Transfered %i of %i bytes, %i remain\n",
@@ -2016,16 +2014,16 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
 
 	/* We have to walk the scatterlist to find it */
 	sg = (struct scatterlist *)cmd->request_buffer;
-	idx = 0;
 	while (segment--) {
 		unsigned long mask =
 		    ~((unsigned long)sg->length - 1) & PAGE_MASK;
 		if ((sg_dma_address(sg) & mask) == (psge->address & mask)) {
-			srb->virt_addr = virt[idx] + (psge->address & ~PAGE_MASK);
+			srb->virt_addr = (page_address(sg->page)
+					   + psge->address -
+					   (psge->address & PAGE_MASK));
 			return;
 		}
 		++sg;
-		++idx;
 	}
 
 	dprintkl(KERN_ERR, "sg_update_list: sg_to_virt failed\n");
@@ -2151,7 +2149,7 @@ static void data_out_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
 				DC395x_read32(acb, TRM_S1040_DMA_CXCNT));
 		}
 		/*
-		 * calculate all the residue data that not yet transfered
+		 * calculate all the residue data that not yet tranfered
 		 * SCSI transfer counter + left in SCSI FIFO data
 		 *
 		 * .....TRM_S1040_SCSI_COUNTER (24bits)
@@ -3269,7 +3267,6 @@ static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
 	struct scsi_cmnd *cmd = srb->cmd;
 	enum dma_data_direction dir = cmd->sc_data_direction;
 	if (cmd->use_sg && dir != PCI_DMA_NONE) {
-		int i;
 		/* unmap DC395x SG list */
 		dprintkdbg(DBG_SG, "pci_unmap_srb: list=%08x(%05x)\n",
 			srb->sg_bus_addr, SEGMENTX_LEN);
@@ -3279,8 +3276,6 @@ static void pci_unmap_srb(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb)
 		dprintkdbg(DBG_SG, "pci_unmap_srb: segs=%i buffer=%p\n",
 			cmd->use_sg, cmd->request_buffer);
 		/* unmap the sg segments */
-		for (i = 0; i < srb->sg_count; i++)
-			kunmap(virt_to_page(srb->virt_map[i]));
 		pci_unmap_sg(acb->dev,
 			     (struct scatterlist *)cmd->request_buffer,
 			     cmd->use_sg, dir);
@@ -3327,7 +3322,7 @@ static void srb_done(struct AdapterCtlBlk *acb, struct DeviceCtlBlk *dcb,
 
 	if (cmd->use_sg) {
 		struct scatterlist* sg = (struct scatterlist *)cmd->request_buffer;
-		ptr = (struct ScsiInqData *)(srb->virt_map[0] + sg->offset);
+		ptr = (struct ScsiInqData *)(page_address(sg->page) + sg->offset);
 	} else {
 		ptr = (struct ScsiInqData *)(cmd->request_buffer);
 	}
@@ -4262,9 +4257,8 @@ static void adapter_sg_tables_free(struct AdapterCtlBlk *acb)
 	const unsigned srbs_per_page = PAGE_SIZE/SEGMENTX_LEN;
 
 	for (i = 0; i < DC395x_MAX_SRB_CNT; i += srbs_per_page)
-		kfree(acb->srb_array[i].segment_x);
-
-	vfree(acb->srb_array[0].virt_map);
+		if (acb->srb_array[i].segment_x)
+			kfree(acb->srb_array[i].segment_x);
 }
 
 
@@ -4280,12 +4274,9 @@ static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
 	int srb_idx = 0;
 	unsigned i = 0;
 	struct SGentry *ptr;
-	void **virt_array;
 
-	for (i = 0; i < DC395x_MAX_SRB_CNT; i++) {
+	for (i = 0; i < DC395x_MAX_SRB_CNT; i++)
 		acb->srb_array[i].segment_x = NULL;
-		acb->srb_array[i].virt_map = NULL;
-	}
 
 	dprintkdbg(DBG_1, "Allocate %i pages for SG tables\n", pages);
 	while (pages--) {
@@ -4306,19 +4297,6 @@ static int __devinit adapter_sg_tables_alloc(struct AdapterCtlBlk *acb)
 		    ptr + (i * DC395x_MAX_SG_LISTENTRY);
 	else
 		dprintkl(KERN_DEBUG, "No space for tmsrb SG table reserved?!\n");
-
-	virt_array = vmalloc((DC395x_MAX_SRB_CNT + 1) * DC395x_MAX_SG_LISTENTRY * sizeof(void*));
-
-	if (!virt_array) {
-		adapter_sg_tables_free(acb);
-		return 1;
-	}
-
-	for (i = 0; i < DC395x_MAX_SRB_CNT + 1; i++) {
-		acb->srb_array[i].virt_map = virt_array;
-		virt_array += DC395x_MAX_SG_LISTENTRY;
-	}
-
 	return 0;
 }
 

drivers/serial/sn_console.c

@@ -1093,6 +1093,7 @@ int __init sn_serial_console_early_setup(void)
 		return -1;
 
 	sal_console_port.sc_ops = &poll_ops;
+	spin_lock_init(&sal_console_port.sc_port.lock);
 	early_sn_setup();	/* Find SAL entry points */
 	register_console(&sal_console_early);
 

drivers/usb/input/wacom.c

@@ -342,9 +342,6 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
 		goto exit;
 	}
 
-	x = le16_to_cpu(*(__le16 *) &data[2]);
-	y = le16_to_cpu(*(__le16 *) &data[4]);
-
 	input_regs(dev, regs);
 
 	if (data[1] & 0x10) { /* in prox */
@@ -373,15 +370,17 @@ static void wacom_graphire_irq(struct urb *urb, struct pt_regs *regs)
 		}
 	}
 
-	if (data[1] & 0x80) {
+	if (data[1] & 0x90) {
+		x = le16_to_cpu(*(__le16 *) &data[2]);
+		y = le16_to_cpu(*(__le16 *) &data[4]);
 		input_report_abs(dev, ABS_X, x);
 		input_report_abs(dev, ABS_Y, y);
-	}
-	if (wacom->tool[0] != BTN_TOOL_MOUSE) {
-		input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
-		input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
-		input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
-		input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
+		if (wacom->tool[0] != BTN_TOOL_MOUSE) {
+			input_report_abs(dev, ABS_PRESSURE, le16_to_cpu(*(__le16 *) &data[6]));
+			input_report_key(dev, BTN_TOUCH, data[1] & 0x01);
+			input_report_key(dev, BTN_STYLUS, data[1] & 0x02);
+			input_report_key(dev, BTN_STYLUS2, data[1] & 0x04);
+		}
 	}
 
 	input_report_key(dev, wacom->tool[0], data[1] & 0x10);
@@ -568,7 +567,7 @@ static void wacom_intuos_irq(struct urb *urb, struct pt_regs *regs)
 
 	/* Cintiq doesn't send data when RDY bit isn't set */
 	if ((wacom->features->type == CINTIQ) && !(data[1] & 0x40))
-		return;
+		goto exit;
 
 	if (wacom->features->type >= INTUOS3) {
 		input_report_abs(dev, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1));

drivers/usb/mon/mon_main.c

@@ -2,6 +2,8 @@
  * The USB Monitor, inspired by Dave Harding's USBMon.
  *
  * mon_main.c: Main file, module initiation and exit, registrations, etc.
+ *
+ * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
  */
 
 #include <linux/kernel.h>
@@ -311,7 +313,7 @@ static int __init mon_init(void)
 
 	mondir = debugfs_create_dir("usbmon", NULL);
 	if (IS_ERR(mondir)) {
-		printk(KERN_NOTICE TAG ": debugs is not available\n");
+		printk(KERN_NOTICE TAG ": debugfs is not available\n");
 		return -ENODEV;
 	}
 	if (mondir == NULL) {

drivers/usb/mon/usb_mon.h

@@ -1,5 +1,7 @@
 /*
  * The USB Monitor, inspired by Dave Harding's USBMon.
+ *
+ * Copyright (C) 2005 Pete Zaitcev (zaitcev@redhat.com)
  */
 
 #ifndef __USB_MON_H

drivers/video/fbmem.c

@@ -628,7 +628,7 @@ fb_pan_display(struct fb_info *info, struct fb_var_screeninfo *var)
 int
 fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
 {
-	int err;
+	int err, flags = info->flags;
 
 	if (var->activate & FB_ACTIVATE_INV_MODE) {
 		struct fb_videomode mode1, mode2;
@@ -682,7 +682,7 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
 			    !list_empty(&info->modelist))
 				err = fb_add_videomode(&mode, &info->modelist);
 
-			if (!err && info->flags & FBINFO_MISC_USEREVENT) {
+			if (!err && (flags & FBINFO_MISC_USEREVENT)) {
 				struct fb_event event;
 
 				info->flags &= ~FBINFO_MISC_USEREVENT;

drivers/video/intelfb/intelfbdrv.c

@@ -583,23 +583,6 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return -ENODEV;
 	}
 
-	/* Map the fb and MMIO regions */
-	dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache
-		(dinfo->aperture.physical, dinfo->aperture.size);
-	if (!dinfo->aperture.virtual) {
-		ERR_MSG("Cannot remap FB region.\n");
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-	dinfo->mmio_base =
-		(u8 __iomem *)ioremap_nocache(dinfo->mmio_base_phys,
-					       INTEL_REG_SIZE);
-	if (!dinfo->mmio_base) {
-		ERR_MSG("Cannot remap MMIO region.\n");
-		cleanup(dinfo);
-		return -ENODEV;
-	}
-
 	/* Get the chipset info. */
 	dinfo->pci_chipset = pdev->device;
 
@@ -630,9 +613,15 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
 		dinfo->accel = 0;
 	}
 
+	if (MB(voffset) < stolen_size)
+		offset = (stolen_size >> 12);
+	else
+		offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
+
 	/* Framebuffer parameters - Use all the stolen memory if >= vram */
-	if (ROUND_UP_TO_PAGE(stolen_size) >= MB(vram)) {
+	if (ROUND_UP_TO_PAGE(stolen_size) >= ((offset << 12) +  MB(vram))) {
 		dinfo->fb.size = ROUND_UP_TO_PAGE(stolen_size);
+		dinfo->fb.offset = 0;
 		dinfo->fbmem_gart = 0;
 	} else {
 		dinfo->fb.size =  MB(vram);
@@ -663,11 +652,6 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return -ENODEV;
 	}
 
-	if (MB(voffset) < stolen_size)
-		offset = (stolen_size >> 12);
-	else
-		offset = ROUND_UP_TO_PAGE(MB(voffset))/GTT_PAGE_SIZE;
-
 	/* set the mem offsets - set them after the already used pages */
 	if (dinfo->accel) {
 		dinfo->ring.offset = offset + gtt_info.current_memory;
@@ -682,6 +666,26 @@ intelfb_pci_register(struct pci_dev *pdev, const struct pci_device_id *ent)
 			+ (dinfo->cursor.size >> 12);
 	}
 
+	/* Map the fb and MMIO regions */
+	/* ioremap only up to the end of used aperture */
+	dinfo->aperture.virtual = (u8 __iomem *)ioremap_nocache
+		(dinfo->aperture.physical, (dinfo->fb.offset << 12)
+		 + dinfo->fb.size);
+	if (!dinfo->aperture.virtual) {
+		ERR_MSG("Cannot remap FB region.\n");
+		cleanup(dinfo);
+		return -ENODEV;
+	}
+
+	dinfo->mmio_base =
+		(u8 __iomem *)ioremap_nocache(dinfo->mmio_base_phys,
+					       INTEL_REG_SIZE);
+	if (!dinfo->mmio_base) {
+		ERR_MSG("Cannot remap MMIO region.\n");
+		cleanup(dinfo);
+		return -ENODEV;
+	}
+
 	/* Allocate memories (which aren't stolen) */
 	if (dinfo->accel) {
 		if (!(dinfo->gtt_ring_mem =

drivers/video/radeonfb.c

@@ -80,7 +80,7 @@
 #include <video/radeon.h>
 #include <linux/radeonfb.h>
 
-#define DEBUG	1
+#define DEBUG  0
 
 #if DEBUG
 #define RTRACE		printk

drivers/w1/w1.c

@@ -593,7 +593,7 @@ void w1_search(struct w1_master *dev, w1_slave_found_callback cb)
 		 * Return 0 - device(s) present, 1 - no devices present.
 		 */
 		if (w1_reset_bus(dev)) {
-			dev_info(&dev->dev, "No devices present on the wire.\n");
+			dev_dbg(&dev->dev, "No devices present on the wire.\n");
 			break;
 		}
 

fs/cifs/CHANGES

@@ -1,3 +1,9 @@
+Version 1.35
+------------
+Add writepage performance improvements.  Fix path name conversions
+for long filenames on mounts which were done with "mapchars" mount option
+specified.
+
 Version 1.34
 ------------
 Fix error mapping of the TOO_MANY_LINKS (hardlinks) case.

fs/cifs/cifssmb.c

@@ -2602,6 +2602,9 @@ int CIFSFindNext(const int xid, struct cifsTconInfo *tcon,
 	if(name_len < PATH_MAX) {
 		memcpy(pSMB->ResumeFileName, psrch_inf->presume_name, name_len);
 		byte_count += name_len;
+		/* 14 byte parm len above enough for 2 byte null terminator */
+		pSMB->ResumeFileName[name_len] = 0;
+		pSMB->ResumeFileName[name_len+1] = 0;
 	} else {
 		rc = -EINVAL;
 		goto FNext2_err_exit;

fs/cifs/misc.c

@@ -611,6 +611,7 @@ cifsConvertToUCS(__le16 * target, const char *source, int maxlen,
 		src_char = source[i];
 		switch (src_char) {
 			case 0:
+				target[j] = 0;
 				goto ctoUCS_out;
 			case ':':
 				target[j] = cpu_to_le16(UNI_COLON);

fs/inotify.c

@@ -402,7 +402,7 @@ static struct inotify_watch *create_watch(struct inotify_device *dev,
 		return ERR_PTR(ret);
 	}
 
-	dev->last_wd = ret;
+	dev->last_wd = watch->wd;
 	watch->mask = mask;
 	atomic_set(&watch->count, 0);
 	INIT_LIST_HEAD(&watch->d_list);

fs/jfs/inode.c

@@ -128,6 +128,10 @@ void jfs_delete_inode(struct inode *inode)
 {
 	jfs_info("In jfs_delete_inode, inode = 0x%p", inode);
 
+	if (is_bad_inode(inode) ||
+	    (JFS_IP(inode)->fileset != cpu_to_le32(FILESYSTEM_I)))
+			return;
+
 	if (test_cflag(COMMIT_Freewmap, inode))
 		jfs_free_zero_link(inode);
 

fs/jfs/jfs_logmgr.c

@@ -191,7 +191,7 @@ static int lbmIOWait(struct lbuf * bp, int flag);
 static bio_end_io_t lbmIODone;
 static void lbmStartIO(struct lbuf * bp);
 static void lmGCwrite(struct jfs_log * log, int cant_block);
-static int lmLogSync(struct jfs_log * log, int nosyncwait);
+static int lmLogSync(struct jfs_log * log, int hard_sync);
 
 
 
@@ -915,19 +915,17 @@ static void lmPostGC(struct lbuf * bp)
  *	if new sync address is available
  *	(normally the case if sync() is executed by back-ground
  *	process).
- *	if not, explicitly run jfs_blogsync() to initiate
- *	getting of new sync address.
  *	calculate new value of i_nextsync which determines when
  *	this code is called again.
  *
  * PARAMETERS:	log	- log structure
- * 		nosyncwait - 1 if called asynchronously
+ * 		hard_sync - 1 to force all metadata to be written
  *
  * RETURN:	0
  *			
  * serialization: LOG_LOCK() held on entry/exit
  */
-static int lmLogSync(struct jfs_log * log, int nosyncwait)
+static int lmLogSync(struct jfs_log * log, int hard_sync)
 {
 	int logsize;
 	int written;		/* written since last syncpt */
@@ -941,11 +939,18 @@ static int lmLogSync(struct jfs_log * log, int nosyncwait)
 	unsigned long flags;
 
 	/* push dirty metapages out to disk */
-	list_for_each_entry(sbi, &log->sb_list, log_list) {
-		filemap_flush(sbi->ipbmap->i_mapping);
-		filemap_flush(sbi->ipimap->i_mapping);
-		filemap_flush(sbi->direct_inode->i_mapping);
-	}
+	if (hard_sync)
+		list_for_each_entry(sbi, &log->sb_list, log_list) {
+			filemap_fdatawrite(sbi->ipbmap->i_mapping);
+			filemap_fdatawrite(sbi->ipimap->i_mapping);
+			filemap_fdatawrite(sbi->direct_inode->i_mapping);
+		}
+	else
+		list_for_each_entry(sbi, &log->sb_list, log_list) {
+			filemap_flush(sbi->ipbmap->i_mapping);
+			filemap_flush(sbi->ipimap->i_mapping);
+			filemap_flush(sbi->direct_inode->i_mapping);
+		}
 
 	/*
 	 *      forward syncpt
@@ -1021,10 +1026,6 @@ static int lmLogSync(struct jfs_log * log, int nosyncwait)
 		/* next syncpt trigger = written + more */
 		log->nextsync = written + more;
 
-	/* return if lmLogSync() from outside of transaction, e.g., sync() */
-	if (nosyncwait)
-		return lsn;
-
 	/* if number of bytes written from last sync point is more
 	 * than 1/4 of the log size, stop new transactions from
 	 * starting until all current transactions are completed
@@ -1049,11 +1050,12 @@ static int lmLogSync(struct jfs_log * log, int nosyncwait)
  *
  * FUNCTION:	write log SYNCPT record for specified log
  *
- * PARAMETERS:	log	- log structure
+ * PARAMETERS:	log	  - log structure
+ * 		hard_sync - set to 1 to force metadata to be written
  */
-void jfs_syncpt(struct jfs_log *log)
+void jfs_syncpt(struct jfs_log *log, int hard_sync)
 {	LOG_LOCK(log);
-	lmLogSync(log, 1);
+	lmLogSync(log, hard_sync);
 	LOG_UNLOCK(log);
 }
 

fs/jfs/jfs_logmgr.h

@@ -510,6 +510,6 @@ extern int lmLogFormat(struct jfs_log *log, s64 logAddress, int logSize);
 extern int lmGroupCommit(struct jfs_log *, struct tblock *);
 extern int jfsIOWait(void *);
 extern void jfs_flush_journal(struct jfs_log * log, int wait);
-extern void jfs_syncpt(struct jfs_log *log);
+extern void jfs_syncpt(struct jfs_log *log, int hard_sync);
 
 #endif				/* _H_JFS_LOGMGR */

fs/jfs/jfs_txnmgr.c

@@ -552,6 +552,11 @@ void txEnd(tid_t tid)
 		 * synchronize with logsync barrier
 		 */
 		if (test_bit(log_SYNCBARRIER, &log->flag)) {
+			TXN_UNLOCK();
+
+			/* write dirty metadata & forward log syncpt */
+			jfs_syncpt(log, 1);
+
 			jfs_info("log barrier off: 0x%x", log->lsn);
 
 			/* enable new transactions start */
@@ -560,11 +565,6 @@ void txEnd(tid_t tid)
 			/* wakeup all waitors for logsync barrier */
 			TXN_WAKEUP(&log->syncwait);
 
-			TXN_UNLOCK();
-
-			/* forward log syncpt */
-			jfs_syncpt(log);
-
 			goto wakeup;
 		}
 	}
@@ -657,7 +657,9 @@ struct tlock *txLock(tid_t tid, struct inode *ip, struct metapage * mp,
 				/* only anonymous txn.
 				 * Remove from anon_list
 				 */
+				TXN_LOCK();
 				list_del_init(&jfs_ip->anon_inode_list);
+				TXN_UNLOCK();
 			}
 			jfs_ip->atlhead = tlck->next;
 		} else {

fs/jfs/super.c

@@ -114,6 +114,8 @@ static void jfs_destroy_inode(struct inode *inode)
 {
 	struct jfs_inode_info *ji = JFS_IP(inode);
 
+	BUG_ON(!list_empty(&ji->anon_inode_list));
+
 	spin_lock_irq(&ji->ag_lock);
 	if (ji->active_ag != -1) {
 		struct bmap *bmap = JFS_SBI(inode->i_sb)->bmap;
@@ -531,7 +533,7 @@ static int jfs_sync_fs(struct super_block *sb, int wait)
 	/* log == NULL indicates read-only mount */
 	if (log) {
 		jfs_flush_journal(log, wait);
-		jfs_syncpt(log);
+		jfs_syncpt(log, 0);
 	}
 
 	return 0;

fs/namei.c

@@ -2216,7 +2216,8 @@ int vfs_rename(struct inode *old_dir, struct dentry *old_dentry,
 		error = vfs_rename_other(old_dir,old_dentry,new_dir,new_dentry);
 	if (!error) {
 		const char *new_name = old_dentry->d_name.name;
-		fsnotify_move(old_dir, new_dir, old_name, new_name, is_dir, new_dentry->d_inode);
+		fsnotify_move(old_dir, new_dir, old_name, new_name, is_dir,
+			      new_dentry->d_inode, old_dentry->d_inode);
 	}
 	fsnotify_oldname_free(old_name);
 

fs/nfs/dir.c

@@ -182,14 +182,16 @@ int nfs_readdir_filler(nfs_readdir_descriptor_t *desc, struct page *page)
 		/* We requested READDIRPLUS, but the server doesn't grok it */
 		if (error == -ENOTSUPP && desc->plus) {
 			NFS_SERVER(inode)->caps &= ~NFS_CAP_READDIRPLUS;
-			NFS_FLAGS(inode) &= ~NFS_INO_ADVISE_RDPLUS;
+			clear_bit(NFS_INO_ADVISE_RDPLUS, &NFS_FLAGS(inode));
 			desc->plus = 0;
 			goto again;
 		}
 		goto error;
 	}
 	SetPageUptodate(page);
-	NFS_FLAGS(inode) |= NFS_INO_INVALID_ATIME;
+	spin_lock(&inode->i_lock);
+	NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATIME;
+	spin_unlock(&inode->i_lock);
 	/* Ensure consistent page alignment of the data.
 	 * Note: assumes we have exclusive access to this mapping either
 	 *	 through inode->i_sem or some other mechanism.
@@ -462,7 +464,9 @@ int uncached_readdir(nfs_readdir_descriptor_t *desc, void *dirent,
 						page,
 						NFS_SERVER(inode)->dtsize,
 						desc->plus);
-	NFS_FLAGS(inode) |= NFS_INO_INVALID_ATIME;
+	spin_lock(&inode->i_lock);
+	NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATIME;
+	spin_unlock(&inode->i_lock);
 	desc->page = page;
 	desc->ptr = kmap(page);		/* matching kunmap in nfs_do_filldir */
 	if (desc->error >= 0) {
@@ -545,7 +549,7 @@ static int nfs_readdir(struct file *filp, void *dirent, filldir_t filldir)
 			break;
 		}
 		if (res == -ETOOSMALL && desc->plus) {
-			NFS_FLAGS(inode) &= ~NFS_INO_ADVISE_RDPLUS;
+			clear_bit(NFS_INO_ADVISE_RDPLUS, &NFS_FLAGS(inode));
 			nfs_zap_caches(inode);
 			desc->plus = 0;
 			desc->entry->eof = 0;
@@ -608,7 +612,7 @@ static inline int nfs_check_verifier(struct inode *dir, struct dentry *dentry)
 {
 	if (IS_ROOT(dentry))
 		return 1;
-	if ((NFS_FLAGS(dir) & NFS_INO_INVALID_ATTR) != 0
+	if ((NFS_I(dir)->cache_validity & NFS_INO_INVALID_ATTR) != 0
 			|| nfs_attribute_timeout(dir))
 		return 0;
 	return nfs_verify_change_attribute(dir, (unsigned long)dentry->d_fsdata);
@@ -1575,11 +1579,12 @@ out:
 
 int nfs_access_get_cached(struct inode *inode, struct rpc_cred *cred, struct nfs_access_entry *res)
 {
-	struct nfs_access_entry *cache = &NFS_I(inode)->cache_access;
+	struct nfs_inode *nfsi = NFS_I(inode);
+	struct nfs_access_entry *cache = &nfsi->cache_access;
 
 	if (cache->cred != cred
 			|| time_after(jiffies, cache->jiffies + NFS_ATTRTIMEO(inode))
-			|| (NFS_FLAGS(inode) & NFS_INO_INVALID_ACCESS))
+			|| (nfsi->cache_validity & NFS_INO_INVALID_ACCESS))
 		return -ENOENT;
 	memcpy(res, cache, sizeof(*res));
 	return 0;
@@ -1587,14 +1592,18 @@ int nfs_access_get_cached(struct inode *inode, struct rpc_cred *cred, struct nfs
 
 void nfs_access_add_cache(struct inode *inode, struct nfs_access_entry *set)
 {
-	struct nfs_access_entry *cache = &NFS_I(inode)->cache_access;
+	struct nfs_inode *nfsi = NFS_I(inode);
+	struct nfs_access_entry *cache = &nfsi->cache_access;
 
 	if (cache->cred != set->cred) {
 		if (cache->cred)
 			put_rpccred(cache->cred);
 		cache->cred = get_rpccred(set->cred);
 	}
-	NFS_FLAGS(inode) &= ~NFS_INO_INVALID_ACCESS;
+	/* FIXME: replace current access_cache BKL reliance with inode->i_lock */
+	spin_lock(&inode->i_lock);
+	nfsi->cache_validity &= ~NFS_INO_INVALID_ACCESS;
+	spin_unlock(&inode->i_lock);
 	cache->jiffies = set->jiffies;
 	cache->mask = set->mask;
 }

fs/nfs/file.c

@@ -134,9 +134,10 @@ nfs_file_release(struct inode *inode, struct file *filp)
  */
 static int nfs_revalidate_file(struct inode *inode, struct file *filp)
 {
+	struct nfs_inode *nfsi = NFS_I(inode);
 	int retval = 0;
 
-	if ((NFS_FLAGS(inode) & NFS_INO_REVAL_PAGECACHE) || nfs_attribute_timeout(inode))
+	if ((nfsi->cache_validity & NFS_INO_REVAL_PAGECACHE) || nfs_attribute_timeout(inode))
 		retval = __nfs_revalidate_inode(NFS_SERVER(inode), inode);
 	nfs_revalidate_mapping(inode, filp->f_mapping);
 	return 0;
@@ -164,7 +165,7 @@ static int nfs_revalidate_file_size(struct inode *inode, struct file *filp)
 		goto force_reval;
 	if (nfsi->npages != 0)
 		return 0;
-	if (!(NFS_FLAGS(inode) & NFS_INO_REVAL_PAGECACHE) && !nfs_attribute_timeout(inode))
+	if (!(nfsi->cache_validity & NFS_INO_REVAL_PAGECACHE) && !nfs_attribute_timeout(inode))
 		return 0;
 force_reval:
 	return __nfs_revalidate_inode(server, inode);

fs/nfs/inode.c

@@ -615,14 +615,18 @@ nfs_zap_caches(struct inode *inode)
 	struct nfs_inode *nfsi = NFS_I(inode);
 	int mode = inode->i_mode;
 
+	spin_lock(&inode->i_lock);
+
 	NFS_ATTRTIMEO(inode) = NFS_MINATTRTIMEO(inode);
 	NFS_ATTRTIMEO_UPDATE(inode) = jiffies;
 
 	memset(NFS_COOKIEVERF(inode), 0, sizeof(NFS_COOKIEVERF(inode)));
 	if (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode))
-		nfsi->flags |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL|NFS_INO_REVAL_PAGECACHE;
+		nfsi->cache_validity |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL|NFS_INO_REVAL_PAGECACHE;
 	else
-		nfsi->flags |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL|NFS_INO_REVAL_PAGECACHE;
+		nfsi->cache_validity |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL|NFS_INO_REVAL_PAGECACHE;
+
+	spin_unlock(&inode->i_lock);
 }
 
 static void nfs_zap_acl_cache(struct inode *inode)
@@ -632,7 +636,9 @@ static void nfs_zap_acl_cache(struct inode *inode)
 	clear_acl_cache = NFS_PROTO(inode)->clear_acl_cache;
 	if (clear_acl_cache != NULL)
 		clear_acl_cache(inode);
-	NFS_I(inode)->flags &= ~NFS_INO_INVALID_ACL;
+	spin_lock(&inode->i_lock);
+	NFS_I(inode)->cache_validity &= ~NFS_INO_INVALID_ACL;
+	spin_unlock(&inode->i_lock);
 }
 
 /*
@@ -739,7 +745,7 @@ nfs_fhget(struct super_block *sb, struct nfs_fh *fh, struct nfs_fattr *fattr)
 			inode->i_fop = &nfs_dir_operations;
 			if (nfs_server_capable(inode, NFS_CAP_READDIRPLUS)
 			    && fattr->size <= NFS_LIMIT_READDIRPLUS)
-				NFS_FLAGS(inode) |= NFS_INO_ADVISE_RDPLUS;
+				set_bit(NFS_INO_ADVISE_RDPLUS, &NFS_FLAGS(inode));
 		} else if (S_ISLNK(inode->i_mode))
 			inode->i_op = &nfs_symlink_inode_operations;
 		else
@@ -814,55 +820,84 @@ nfs_setattr(struct dentry *dentry, struct iattr *attr)
 		nfs_wb_all(inode);
 	}
 	error = NFS_PROTO(inode)->setattr(dentry, &fattr, attr);
-	if (error == 0) {
+	if (error == 0)
 		nfs_refresh_inode(inode, &fattr);
+	nfs_end_data_update(inode);
+	unlock_kernel();
+	return error;
+}
+
+/**
+ * nfs_setattr_update_inode - Update inode metadata after a setattr call.
+ * @inode: pointer to struct inode
+ * @attr: pointer to struct iattr
+ *
+ * Note: we do this in the *proc.c in order to ensure that
+ *       it works for things like exclusive creates too.
+ */
+void nfs_setattr_update_inode(struct inode *inode, struct iattr *attr)
+{
+	if ((attr->ia_valid & (ATTR_MODE|ATTR_UID|ATTR_GID)) != 0) {
 		if ((attr->ia_valid & ATTR_MODE) != 0) {
-			int mode;
-			mode = inode->i_mode & ~S_IALLUGO;
-			mode |= attr->ia_mode & S_IALLUGO;
+			int mode = attr->ia_mode & S_IALLUGO;
+			mode |= inode->i_mode & ~S_IALLUGO;
 			inode->i_mode = mode;
 		}
 		if ((attr->ia_valid & ATTR_UID) != 0)
 			inode->i_uid = attr->ia_uid;
 		if ((attr->ia_valid & ATTR_GID) != 0)
 			inode->i_gid = attr->ia_gid;
-		if ((attr->ia_valid & ATTR_SIZE) != 0) {
-			inode->i_size = attr->ia_size;
-			vmtruncate(inode, attr->ia_size);
-		}
+		spin_lock(&inode->i_lock);
+		NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
+		spin_unlock(&inode->i_lock);
 	}
-	if ((attr->ia_valid & (ATTR_MODE|ATTR_UID|ATTR_GID)) != 0)
-		NFS_FLAGS(inode) |= NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL;
-	nfs_end_data_update(inode);
-	unlock_kernel();
-	return error;
+	if ((attr->ia_valid & ATTR_SIZE) != 0) {
+		inode->i_size = attr->ia_size;
+		vmtruncate(inode, attr->ia_size);
+	}
+}
+
+static int nfs_wait_schedule(void *word)
+{
+	if (signal_pending(current))
+		return -ERESTARTSYS;
+	schedule();
+	return 0;
 }
 
 /*
  * Wait for the inode to get unlocked.
- * (Used for NFS_INO_LOCKED and NFS_INO_REVALIDATING).
  */
-static int
-nfs_wait_on_inode(struct inode *inode, int flag)
+static int nfs_wait_on_inode(struct inode *inode)
 {
 	struct rpc_clnt	*clnt = NFS_CLIENT(inode);
 	struct nfs_inode *nfsi = NFS_I(inode);
-
+	sigset_t oldmask;
 	int error;
-	if (!(NFS_FLAGS(inode) & flag))
-		return 0;
+
 	atomic_inc(&inode->i_count);
-	error = nfs_wait_event(clnt, nfsi->nfs_i_wait,
-				!(NFS_FLAGS(inode) & flag));
+	rpc_clnt_sigmask(clnt, &oldmask);
+	error = wait_on_bit_lock(&nfsi->flags, NFS_INO_REVALIDATING,
+					nfs_wait_schedule, TASK_INTERRUPTIBLE);
+	rpc_clnt_sigunmask(clnt, &oldmask);
 	iput(inode);
+
 	return error;
 }
 
+static void nfs_wake_up_inode(struct inode *inode)
+{
+	struct nfs_inode *nfsi = NFS_I(inode);
+
+	clear_bit(NFS_INO_REVALIDATING, &nfsi->flags);
+	smp_mb__after_clear_bit();
+	wake_up_bit(&nfsi->flags, NFS_INO_REVALIDATING);
+}
+
 int nfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
 {
 	struct inode *inode = dentry->d_inode;
-	struct nfs_inode *nfsi = NFS_I(inode);
-	int need_atime = nfsi->flags & NFS_INO_INVALID_ATIME;
+	int need_atime = NFS_I(inode)->cache_validity & NFS_INO_INVALID_ATIME;
 	int err;
 
 	if (__IS_FLG(inode, MS_NOATIME))
@@ -1008,7 +1043,7 @@ __nfs_revalidate_inode(struct nfs_server *server, struct inode *inode)
 	struct nfs_fattr fattr;
 	struct nfs_inode *nfsi = NFS_I(inode);
 	unsigned long verifier;
-	unsigned int flags;
+	unsigned long cache_validity;
 
 	dfprintk(PAGECACHE, "NFS: revalidating (%s/%Ld)\n",
 		inode->i_sb->s_id, (long long)NFS_FILEID(inode));
@@ -1019,18 +1054,19 @@ __nfs_revalidate_inode(struct nfs_server *server, struct inode *inode)
 	if (NFS_STALE(inode))
  		goto out_nowait;
 
-	while (NFS_REVALIDATING(inode)) {
-		status = nfs_wait_on_inode(inode, NFS_INO_REVALIDATING);
-		if (status < 0)
-			goto out_nowait;
-		if (NFS_ATTRTIMEO(inode) == 0)
-			continue;
-		if (NFS_FLAGS(inode) & (NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA|NFS_INO_INVALID_ATIME))
-			continue;
-		status = NFS_STALE(inode) ? -ESTALE : 0;
-		goto out_nowait;
+	status = nfs_wait_on_inode(inode);
+	if (status < 0)
+		goto out;
+	if (NFS_STALE(inode)) {
+		status = -ESTALE;
+		/* Do we trust the cached ESTALE? */
+		if (NFS_ATTRTIMEO(inode) != 0) {
+			if (nfsi->cache_validity & (NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA|NFS_INO_INVALID_ATIME)) {
+				/* no */
+			} else
+				goto out;
+		}
 	}
-	NFS_FLAGS(inode) |= NFS_INO_REVALIDATING;
 
 	/* Protect against RPC races by saving the change attribute */
 	verifier = nfs_save_change_attribute(inode);
@@ -1042,7 +1078,7 @@ __nfs_revalidate_inode(struct nfs_server *server, struct inode *inode)
 		if (status == -ESTALE) {
 			nfs_zap_caches(inode);
 			if (!S_ISDIR(inode->i_mode))
-				NFS_FLAGS(inode) |= NFS_INO_STALE;
+				set_bit(NFS_INO_STALE, &NFS_FLAGS(inode));
 		}
 		goto out;
 	}
@@ -1054,25 +1090,30 @@ __nfs_revalidate_inode(struct nfs_server *server, struct inode *inode)
 			 (long long)NFS_FILEID(inode), status);
 		goto out;
 	}
-	flags = nfsi->flags;
-	nfsi->flags &= ~NFS_INO_REVAL_PAGECACHE;
+	spin_lock(&inode->i_lock);
+	cache_validity = nfsi->cache_validity;
+	nfsi->cache_validity &= ~NFS_INO_REVAL_PAGECACHE;
+
 	/*
 	 * We may need to keep the attributes marked as invalid if
 	 * we raced with nfs_end_attr_update().
 	 */
 	if (verifier == nfsi->cache_change_attribute)
-		nfsi->flags &= ~(NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ATIME);
-	/* Do the page cache invalidation */
+		nfsi->cache_validity &= ~(NFS_INO_INVALID_ATTR|NFS_INO_INVALID_ATIME);
+	spin_unlock(&inode->i_lock);
+
 	nfs_revalidate_mapping(inode, inode->i_mapping);
-	if (flags & NFS_INO_INVALID_ACL)
+
+	if (cache_validity & NFS_INO_INVALID_ACL)
 		nfs_zap_acl_cache(inode);
+
 	dfprintk(PAGECACHE, "NFS: (%s/%Ld) revalidation complete\n",
 		inode->i_sb->s_id,
 		(long long)NFS_FILEID(inode));
 
-out:
-	NFS_FLAGS(inode) &= ~NFS_INO_REVALIDATING;
-	wake_up(&nfsi->nfs_i_wait);
+ out:
+	nfs_wake_up_inode(inode);
+
  out_nowait:
 	unlock_kernel();
 	return status;
@@ -1096,7 +1137,7 @@ int nfs_attribute_timeout(struct inode *inode)
  */
 int nfs_revalidate_inode(struct nfs_server *server, struct inode *inode)
 {
-	if (!(NFS_FLAGS(inode) & (NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA))
+	if (!(NFS_I(inode)->cache_validity & (NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA))
 			&& !nfs_attribute_timeout(inode))
 		return NFS_STALE(inode) ? -ESTALE : 0;
 	return __nfs_revalidate_inode(server, inode);
@@ -1111,19 +1152,23 @@ void nfs_revalidate_mapping(struct inode *inode, struct address_space *mapping)
 {
 	struct nfs_inode *nfsi = NFS_I(inode);
 
-	if (nfsi->flags & NFS_INO_INVALID_DATA) {
+	if (nfsi->cache_validity & NFS_INO_INVALID_DATA) {
 		if (S_ISREG(inode->i_mode)) {
 			if (filemap_fdatawrite(mapping) == 0)
 				filemap_fdatawait(mapping);
 			nfs_wb_all(inode);
 		}
 		invalidate_inode_pages2(mapping);
-		nfsi->flags &= ~NFS_INO_INVALID_DATA;
+
+		spin_lock(&inode->i_lock);
+		nfsi->cache_validity &= ~NFS_INO_INVALID_DATA;
 		if (S_ISDIR(inode->i_mode)) {
 			memset(nfsi->cookieverf, 0, sizeof(nfsi->cookieverf));
 			/* This ensures we revalidate child dentries */
 			nfsi->cache_change_attribute++;
 		}
+		spin_unlock(&inode->i_lock);
+
 		dfprintk(PAGECACHE, "NFS: (%s/%Ld) data cache invalidated\n",
 				inode->i_sb->s_id,
 				(long long)NFS_FILEID(inode));
@@ -1153,10 +1198,12 @@ void nfs_end_data_update(struct inode *inode)
 
 	if (!nfs_have_delegation(inode, FMODE_READ)) {
 		/* Mark the attribute cache for revalidation */
-		nfsi->flags |= NFS_INO_INVALID_ATTR;
+		spin_lock(&inode->i_lock);
+		nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
 		/* Directories and symlinks: invalidate page cache too */
 		if (S_ISDIR(inode->i_mode) || S_ISLNK(inode->i_mode))
-			nfsi->flags |= NFS_INO_INVALID_DATA;
+			nfsi->cache_validity |= NFS_INO_INVALID_DATA;
+		spin_unlock(&inode->i_lock);
 	}
 	nfsi->cache_change_attribute ++;
 	atomic_dec(&nfsi->data_updates);
@@ -1181,6 +1228,8 @@ int nfs_refresh_inode(struct inode *inode, struct nfs_fattr *fattr)
 	if (nfs_have_delegation(inode, FMODE_READ))
 		return 0;
 
+	spin_lock(&inode->i_lock);
+
 	/* Are we in the process of updating data on the server? */
 	data_unstable = nfs_caches_unstable(inode);
 
@@ -1189,19 +1238,23 @@ int nfs_refresh_inode(struct inode *inode, struct nfs_fattr *fattr)
 				&& nfsi->change_attr == fattr->pre_change_attr)
 			nfsi->change_attr = fattr->change_attr;
 		if (nfsi->change_attr != fattr->change_attr) {
-			nfsi->flags |= NFS_INO_INVALID_ATTR;
+			nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
 			if (!data_unstable)
-				nfsi->flags |= NFS_INO_REVAL_PAGECACHE;
+				nfsi->cache_validity |= NFS_INO_REVAL_PAGECACHE;
 		}
 	}
 
-	if ((fattr->valid & NFS_ATTR_FATTR) == 0)
+	if ((fattr->valid & NFS_ATTR_FATTR) == 0) {
+		spin_unlock(&inode->i_lock);
 		return 0;
+	}
 
 	/* Has the inode gone and changed behind our back? */
 	if (nfsi->fileid != fattr->fileid
-			|| (inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT))
+			|| (inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT)) {
+		spin_unlock(&inode->i_lock);
 		return -EIO;
+	}
 
 	cur_size = i_size_read(inode);
  	new_isize = nfs_size_to_loff_t(fattr->size);
@@ -1216,30 +1269,31 @@ int nfs_refresh_inode(struct inode *inode, struct nfs_fattr *fattr)
 
 	/* Verify a few of the more important attributes */
 	if (!timespec_equal(&inode->i_mtime, &fattr->mtime)) {
-		nfsi->flags |= NFS_INO_INVALID_ATTR;
+		nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
 		if (!data_unstable)
-			nfsi->flags |= NFS_INO_REVAL_PAGECACHE;
+			nfsi->cache_validity |= NFS_INO_REVAL_PAGECACHE;
 	}
 	if (cur_size != new_isize) {
-		nfsi->flags |= NFS_INO_INVALID_ATTR;
+		nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
 		if (nfsi->npages == 0)
-			nfsi->flags |= NFS_INO_REVAL_PAGECACHE;
+			nfsi->cache_validity |= NFS_INO_REVAL_PAGECACHE;
 	}
 
 	/* Have any file permissions changed? */
 	if ((inode->i_mode & S_IALLUGO) != (fattr->mode & S_IALLUGO)
 			|| inode->i_uid != fattr->uid
 			|| inode->i_gid != fattr->gid)
-		nfsi->flags |= NFS_INO_INVALID_ATTR | NFS_INO_INVALID_ACCESS | NFS_INO_INVALID_ACL;
+		nfsi->cache_validity |= NFS_INO_INVALID_ATTR | NFS_INO_INVALID_ACCESS | NFS_INO_INVALID_ACL;
 
 	/* Has the link count changed? */
 	if (inode->i_nlink != fattr->nlink)
-		nfsi->flags |= NFS_INO_INVALID_ATTR;
+		nfsi->cache_validity |= NFS_INO_INVALID_ATTR;
 
 	if (!timespec_equal(&inode->i_atime, &fattr->atime))
-		nfsi->flags |= NFS_INO_INVALID_ATIME;
+		nfsi->cache_validity |= NFS_INO_INVALID_ATIME;
 
 	nfsi->read_cache_jiffies = fattr->timestamp;
+	spin_unlock(&inode->i_lock);
 	return 0;
 }
 
@@ -1278,11 +1332,15 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr, unsign
 		goto out_err;
 	}
 
+	spin_lock(&inode->i_lock);
+
 	/*
 	 * Make sure the inode's type hasn't changed.
 	 */
-	if ((inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT))
+	if ((inode->i_mode & S_IFMT) != (fattr->mode & S_IFMT)) {
+		spin_unlock(&inode->i_lock);
 		goto out_changed;
+	}
 
 	/*
 	 * Update the read time so we don't revalidate too often.
@@ -1373,8 +1431,9 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr, unsign
 				|| S_ISLNK(inode->i_mode)))
 		invalid &= ~NFS_INO_INVALID_DATA;
 	if (!nfs_have_delegation(inode, FMODE_READ))
-		nfsi->flags |= invalid;
+		nfsi->cache_validity |= invalid;
 
+	spin_unlock(&inode->i_lock);
 	return 0;
  out_changed:
 	/*
@@ -1391,7 +1450,7 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr, unsign
 	 */
 	nfs_invalidate_inode(inode);
  out_err:
-	NFS_FLAGS(inode) |= NFS_INO_STALE;
+	set_bit(NFS_INO_STALE, &NFS_FLAGS(inode));
 	return -ESTALE;
 }
 
@@ -1950,7 +2009,8 @@ static struct inode *nfs_alloc_inode(struct super_block *sb)
 	nfsi = (struct nfs_inode *)kmem_cache_alloc(nfs_inode_cachep, SLAB_KERNEL);
 	if (!nfsi)
 		return NULL;
-	nfsi->flags = 0;
+	nfsi->flags = 0UL;
+	nfsi->cache_validity = 0UL;
 #ifdef CONFIG_NFS_V3_ACL
 	nfsi->acl_access = ERR_PTR(-EAGAIN);
 	nfsi->acl_default = ERR_PTR(-EAGAIN);
@@ -1982,7 +2042,6 @@ static void init_once(void * foo, kmem_cache_t * cachep, unsigned long flags)
 		nfsi->ndirty = 0;
 		nfsi->ncommit = 0;
 		nfsi->npages = 0;
-		init_waitqueue_head(&nfsi->nfs_i_wait);
 		nfs4_init_once(nfsi);
 	}
 }

fs/nfs/nfs3acl.c

@@ -308,7 +308,9 @@ static int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
 	nfs_begin_data_update(inode);
 	status = rpc_call(server->client_acl, ACLPROC3_SETACL,
 			  &args, &fattr, 0);
-	NFS_FLAGS(inode) |= NFS_INO_INVALID_ACCESS;
+	spin_lock(&inode->i_lock);
+	NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ACCESS;
+	spin_unlock(&inode->i_lock);
 	nfs_end_data_update(inode);
 	dprintk("NFS reply setacl: %d\n", status);
 

fs/nfs/nfs3proc.c

@@ -120,6 +120,8 @@ nfs3_proc_setattr(struct dentry *dentry, struct nfs_fattr *fattr,
 	dprintk("NFS call  setattr\n");
 	fattr->valid = 0;
 	status = rpc_call(NFS_CLIENT(inode), NFS3PROC_SETATTR, &arg, fattr, 0);
+	if (status == 0)
+		nfs_setattr_update_inode(inode, sattr);
 	dprintk("NFS reply setattr: %d\n", status);
 	return status;
 }
@@ -370,6 +372,8 @@ again:
 		 * not sure this buys us anything (and I'd have
 		 * to revamp the NFSv3 XDR code) */
 		status = nfs3_proc_setattr(dentry, &fattr, sattr);
+		if (status == 0)
+			nfs_setattr_update_inode(dentry->d_inode, sattr);
 		nfs_refresh_inode(dentry->d_inode, &fattr);
 		dprintk("NFS reply setattr (post-create): %d\n", status);
 	}

fs/nfs/nfs4proc.c

@@ -753,6 +753,7 @@ static int _nfs4_do_setattr(struct nfs_server *server, struct nfs_fattr *fattr,
                 .rpc_argp       = &arg,
                 .rpc_resp       = &res,
         };
+	int status;
 
         fattr->valid = 0;
 
@@ -762,7 +763,8 @@ static int _nfs4_do_setattr(struct nfs_server *server, struct nfs_fattr *fattr,
 	} else
 		memcpy(&arg.stateid, &zero_stateid, sizeof(arg.stateid));
 
-	return rpc_call_sync(server->client, &msg, 0);
+	status = rpc_call_sync(server->client, &msg, 0);
+	return status;
 }
 
 static int nfs4_do_setattr(struct nfs_server *server, struct nfs_fattr *fattr,
@@ -1145,6 +1147,8 @@ nfs4_proc_setattr(struct dentry *dentry, struct nfs_fattr *fattr,
 
 	status = nfs4_do_setattr(NFS_SERVER(inode), fattr,
 			NFS_FH(inode), sattr, state);
+	if (status == 0)
+		nfs_setattr_update_inode(inode, sattr);
 	if (state != NULL)
 		nfs4_close_state(state, FMODE_WRITE);
 	put_rpccred(cred);
@@ -1449,8 +1453,10 @@ nfs4_proc_create(struct inode *dir, struct dentry *dentry, struct iattr *sattr,
 		struct nfs_fattr fattr;
 		status = nfs4_do_setattr(NFS_SERVER(dir), &fattr,
 		                     NFS_FH(state->inode), sattr, state);
-		if (status == 0)
+		if (status == 0) {
+			nfs_setattr_update_inode(state->inode, sattr);
 			goto out;
+		}
 	} else if (flags != 0)
 		goto out;
 	nfs4_close_state(state, flags);

fs/nfs/proc.c

@@ -114,6 +114,8 @@ nfs_proc_setattr(struct dentry *dentry, struct nfs_fattr *fattr,
 	dprintk("NFS call  setattr\n");
 	fattr->valid = 0;
 	status = rpc_call(NFS_CLIENT(inode), NFSPROC_SETATTR, &arg, fattr, 0);
+	if (status == 0)
+		nfs_setattr_update_inode(inode, sattr);
 	dprintk("NFS reply setattr: %d\n", status);
 	return status;
 }

fs/nfs/read.c

@@ -140,7 +140,9 @@ static int nfs_readpage_sync(struct nfs_open_context *ctx, struct inode *inode,
 		if (rdata->res.eof != 0 || result == 0)
 			break;
 	} while (count);
-	NFS_FLAGS(inode) |= NFS_INO_INVALID_ATIME;
+	spin_lock(&inode->i_lock);
+	NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATIME;
+	spin_unlock(&inode->i_lock);
 
 	if (count)
 		memclear_highpage_flush(page, rdata->args.pgbase, count);
@@ -473,7 +475,9 @@ void nfs_readpage_result(struct rpc_task *task)
 		}
 		task->tk_status = -EIO;
 	}
-	NFS_FLAGS(data->inode) |= NFS_INO_INVALID_ATIME;
+	spin_lock(&data->inode->i_lock);
+	NFS_I(data->inode)->cache_validity |= NFS_INO_INVALID_ATIME;
+	spin_unlock(&data->inode->i_lock);
 	data->complete(data, status);
 }