regulator: twl6030: Fix voltage selection logic

The voltage selection logic for the twl6030 smps fails if
min:max is such that min < 1300mV and max > 1300mV although
this is in valid range for a regulator e.g. [x, 1350] where
x < 1300.
Fixing the voltage selection logic such that first it will
check for min_uV for a range and then calculated value will
be checked against max_uV.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

drivers/regulator/twl-regulator.c

@@ -755,12 +755,16 @@ twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
 	case 0:
 		if (min_uV == 0)
 			vsel = 0;
-		else if ((min_uV >= 600000) && (max_uV <= 1300000)) {
+		else if ((min_uV >= 600000) && (min_uV <= 1300000)) {
+			int calc_uV;
 			vsel = (min_uV - 600000) / 125;
 			if (vsel % 100)
 				vsel += 100;
 			vsel /= 100;
 			vsel++;
+			calc_uV = twl6030smps_list_voltage(rdev, vsel);
+			if (calc_uV > max_uV)
+				return -EINVAL;
 		}
 		/* Values 1..57 for vsel are linear and can be calculated
 		 * values 58..62 are non linear.
@@ -781,12 +785,16 @@ twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
 	case SMPS_OFFSET_EN:
 		if (min_uV == 0)
 			vsel = 0;
-		else if ((min_uV >= 700000) && (max_uV <= 1420000)) {
+		else if ((min_uV >= 700000) && (min_uV <= 1420000)) {
+			int calc_uV;
 			vsel = (min_uV - 700000) / 125;
 			if (vsel % 100)
 				vsel += 100;
 			vsel /= 100;
 			vsel++;
+			calc_uV = twl6030smps_list_voltage(rdev, vsel);
+			if (calc_uV > max_uV)
+				return -EINVAL;
 		}
 		/* Values 1..57 for vsel are linear and can be calculated
 		 * values 58..62 are non linear.
@@ -819,7 +827,7 @@ twl6030smps_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV,
 		if (min_uV == 0)
 			vsel = 0;
 		else if ((min_uV >= 2161000) && (max_uV <= 4321000)) {
-			vsel = (min_uV - 1852000) / 386;
+			vsel = (min_uV - 2161000) / 386;
 			if (vsel % 100)
 				vsel += 100;
 			vsel /= 100;