[SCSI] lpfc 8.1.7 : Fix failing firmware download due to mailbox delays needing to be longer

Fix failing firmware download due to mailbox delays needing to be longer.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

drivers/scsi/lpfc/lpfc_attr.c

@@ -1000,7 +1000,8 @@ sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
 			spin_unlock_irq(phba->host->host_lock);
 			rc = lpfc_sli_issue_mbox_wait (phba,
 						       phba->sysfs_mbox.mbox,
-						       phba->fc_ratov * 2);
+				lpfc_mbox_tmo_val(phba,
+				    phba->sysfs_mbox.mbox->mb.mbxCommand) * HZ);
 			spin_lock_irq(phba->host->host_lock);
 		}
 

drivers/scsi/lpfc/lpfc_crtn.h

@@ -127,6 +127,7 @@ void lpfc_config_port(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_kill_board(struct lpfc_hba *, LPFC_MBOXQ_t *);
 void lpfc_mbox_put(struct lpfc_hba *, LPFC_MBOXQ_t *);
 LPFC_MBOXQ_t *lpfc_mbox_get(struct lpfc_hba *);
+int lpfc_mbox_tmo_val(struct lpfc_hba *, int);
 
 int lpfc_mem_alloc(struct lpfc_hba *);
 void lpfc_mem_free(struct lpfc_hba *);

drivers/scsi/lpfc/lpfc_mbox.c

@@ -651,3 +651,19 @@ lpfc_mbox_get(struct lpfc_hba * phba)
 
 	return mbq;
 }
+
+int
+lpfc_mbox_tmo_val(struct lpfc_hba *phba, int cmd)
+{
+	switch (cmd) {
+	case MBX_WRITE_NV:	/* 0x03 */
+	case MBX_UPDATE_CFG:	/* 0x1B */
+	case MBX_DOWN_LOAD:	/* 0x1C */
+	case MBX_DEL_LD_ENTRY:	/* 0x1D */
+	case MBX_LOAD_AREA:	/* 0x81 */
+	case MBX_FLASH_WR_ULA:  /* 0x98 */
+	case MBX_LOAD_EXP_ROM:	/* 0x9C */
+		return LPFC_MBOX_TMO_FLASH_CMD;
+	}
+	return LPFC_MBOX_TMO;
+}

drivers/scsi/lpfc/lpfc_sli.c

@@ -2197,7 +2197,8 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
 			return (MBX_NOT_FINISHED);
 		}
 		/* timeout active mbox command */
-		mod_timer(&psli->mbox_tmo, jiffies + HZ * LPFC_MBOX_TMO);
+		mod_timer(&psli->mbox_tmo, (jiffies +
+			       (HZ * lpfc_mbox_tmo_val(phba, mb->mbxCommand))));
 	}
 
 	/* Mailbox cmd <cmd> issue */
@@ -2257,7 +2258,6 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
 		break;
 
 	case MBX_POLL:
-		i = 0;
 		psli->mbox_active = NULL;
 		if (psli->sli_flag & LPFC_SLI2_ACTIVE) {
 			/* First read mbox status word */
@@ -2271,11 +2271,14 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
 		/* Read the HBA Host Attention Register */
 		ha_copy = readl(phba->HAregaddr);
 
+		i = lpfc_mbox_tmo_val(phba, mb->mbxCommand);
+		i *= 1000; /* Convert to ms */
+
 		/* Wait for command to complete */
 		while (((word0 & OWN_CHIP) == OWN_CHIP) ||
 		       (!(ha_copy & HA_MBATT) &&
 			(phba->hba_state > LPFC_WARM_START))) {
-			if (i++ >= 100) {
+			if (i-- <= 0) {
 				psli->sli_flag &= ~LPFC_SLI_MBOX_ACTIVE;
 				spin_unlock_irqrestore(phba->host->host_lock,
 						       drvr_flag);
@@ -2293,7 +2296,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmbox, uint32_t flag)
 
 			/* Can be in interrupt context, do not sleep */
 			/* (or might be called with interrupts disabled) */
-			mdelay(i);
+			mdelay(1);
 
 			spin_lock_irqsave(phba->host->host_lock, drvr_flag);
 

drivers/scsi/lpfc/lpfc_sli.h

@@ -225,3 +225,9 @@ struct lpfc_sli {
 
 #define LPFC_MBOX_TMO           30	/* Sec tmo for outstanding mbox
 					   command */
+#define LPFC_MBOX_TMO_FLASH_CMD 300     /* Sec tmo for outstanding FLASH write
+					 * or erase cmds. This is especially
+					 * long because of the potential of
+					 * multiple flash erases that can be
+					 * spawned.
+					 */