Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: tune down the noise of the RP irq limit fail
  drm/i915: Remove the error message for unbinding pinned buffers
  drm/i915: Limit page allocations to lowmem (dma32) for i965
  drm/i915: always use RPNSWREQ for turbo change requests
  drm/i915: reject doubleclocked cea modes on dp
  drm/i915: Adding TV Out Missing modes.
  drm/i915: wait for a vblank to pass after tv detect
  drm/i915: no lvds quirk for HP t5740e Thin Client
  drm/i915: enable vdd when switching off the eDP panel
  drm/i915: Fix PCH PLL assertions to not assume CRTC:PLL relationship
  drm/i915: Always update RPS interrupts thresholds along with frequency
  drm/i915: properly handle interlaced bit for sdvo dtd conversion
  drm/i915: fix module unload since error_state rework
  drm/i915: be more careful when returning -ENXIO in gmbus transfer

drivers/gpu/drm/i915/i915_debugfs.c

@@ -2032,6 +2032,8 @@ void i915_debugfs_cleanup(struct drm_minor *minor)
 				 1, minor);
 	drm_debugfs_remove_files((struct drm_info_list *) &i915_ring_stop_fops,
 				 1, minor);
+	drm_debugfs_remove_files((struct drm_info_list *) &i915_error_state_fops,
+				 1, minor);
 }
 
 #endif /* CONFIG_DEBUG_FS */

drivers/gpu/drm/i915/i915_gem.c

@@ -2063,10 +2063,8 @@ i915_gem_object_unbind(struct drm_i915_gem_object *obj)
 	if (obj->gtt_space == NULL)
 		return 0;
 
-	if (obj->pin_count != 0) {
-		DRM_ERROR("Attempting to unbind pinned buffer\n");
-		return -EINVAL;
-	}
+	if (obj->pin_count)
+		return -EBUSY;
 
 	ret = i915_gem_object_finish_gpu(obj);
 	if (ret)
@@ -3293,6 +3291,7 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj;
 	struct address_space *mapping;
+	u32 mask;
 
 	obj = kzalloc(sizeof(*obj), GFP_KERNEL);
 	if (obj == NULL)
@@ -3303,8 +3302,15 @@ struct drm_i915_gem_object *i915_gem_alloc_object(struct drm_device *dev,
 		return NULL;
 	}
 
+	mask = GFP_HIGHUSER | __GFP_RECLAIMABLE;
+	if (IS_CRESTLINE(dev) || IS_BROADWATER(dev)) {
+		/* 965gm cannot relocate objects above 4GiB. */
+		mask &= ~__GFP_HIGHMEM;
+		mask |= __GFP_DMA32;
+	}
+
 	mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping;
-	mapping_set_gfp_mask(mapping, GFP_HIGHUSER | __GFP_RECLAIMABLE);
+	mapping_set_gfp_mask(mapping, mask);
 
 	i915_gem_info_add_obj(dev_priv, size);
 

drivers/gpu/drm/i915/i915_irq.c

@@ -350,8 +350,8 @@ static void gen6_pm_rps_work(struct work_struct *work)
 {
 	drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
 						    rps_work);
-	u8 new_delay = dev_priv->cur_delay;
 	u32 pm_iir, pm_imr;
+	u8 new_delay;
 
 	spin_lock_irq(&dev_priv->rps_lock);
 	pm_iir = dev_priv->pm_iir;
@@ -360,41 +360,18 @@ static void gen6_pm_rps_work(struct work_struct *work)
 	I915_WRITE(GEN6_PMIMR, 0);
 	spin_unlock_irq(&dev_priv->rps_lock);
 
-	if (!pm_iir)
+	if ((pm_iir & GEN6_PM_DEFERRED_EVENTS) == 0)
 		return;
 
 	mutex_lock(&dev_priv->dev->struct_mutex);
-	if (pm_iir & GEN6_PM_RP_UP_THRESHOLD) {
-		if (dev_priv->cur_delay != dev_priv->max_delay)
-			new_delay = dev_priv->cur_delay + 1;
-		if (new_delay > dev_priv->max_delay)
-			new_delay = dev_priv->max_delay;
-	} else if (pm_iir & (GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_DOWN_TIMEOUT)) {
-		gen6_gt_force_wake_get(dev_priv);
-		if (dev_priv->cur_delay != dev_priv->min_delay)
-			new_delay = dev_priv->cur_delay - 1;
-		if (new_delay < dev_priv->min_delay) {
-			new_delay = dev_priv->min_delay;
-			I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
-				   I915_READ(GEN6_RP_INTERRUPT_LIMITS) |
-				   ((new_delay << 16) & 0x3f0000));
-		} else {
-			/* Make sure we continue to get down interrupts
-			 * until we hit the minimum frequency */
-			I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
-				   I915_READ(GEN6_RP_INTERRUPT_LIMITS) & ~0x3f0000);
-		}
-		gen6_gt_force_wake_put(dev_priv);
-	}
+
+	if (pm_iir & GEN6_PM_RP_UP_THRESHOLD)
+		new_delay = dev_priv->cur_delay + 1;
+	else
+		new_delay = dev_priv->cur_delay - 1;
 
 	gen6_set_rps(dev_priv->dev, new_delay);
-	dev_priv->cur_delay = new_delay;
 
-	/*
-	 * rps_lock not held here because clearing is non-destructive. There is
-	 * an *extremely* unlikely race with gen6_rps_enable() that is prevented
-	 * by holding struct_mutex for the duration of the write.
-	 */
 	mutex_unlock(&dev_priv->dev->struct_mutex);
 }
 

drivers/gpu/drm/i915/intel_display.c

@@ -910,9 +910,10 @@ static void assert_pll(struct drm_i915_private *dev_priv,
 
 /* For ILK+ */
 static void assert_pch_pll(struct drm_i915_private *dev_priv,
-			   struct intel_crtc *intel_crtc, bool state)
+			   struct intel_pch_pll *pll,
+			   struct intel_crtc *crtc,
+			   bool state)
 {
-	int reg;
 	u32 val;
 	bool cur_state;
 
@@ -921,30 +922,37 @@ static void assert_pch_pll(struct drm_i915_private *dev_priv,
 		return;
 	}
 
-	if (!intel_crtc->pch_pll) {
-		WARN(1, "asserting PCH PLL enabled with no PLL\n");
+	if (WARN (!pll,
+		  "asserting PCH PLL %s with no PLL\n", state_string(state)))
 		return;
-	}
 
-	if (HAS_PCH_CPT(dev_priv->dev)) {
+	val = I915_READ(pll->pll_reg);
+	cur_state = !!(val & DPLL_VCO_ENABLE);
+	WARN(cur_state != state,
+	     "PCH PLL state for reg %x assertion failure (expected %s, current %s), val=%08x\n",
+	     pll->pll_reg, state_string(state), state_string(cur_state), val);
+
+	/* Make sure the selected PLL is correctly attached to the transcoder */
+	if (crtc && HAS_PCH_CPT(dev_priv->dev)) {
 		u32 pch_dpll;
 
 		pch_dpll = I915_READ(PCH_DPLL_SEL);
-
-		/* Make sure the selected PLL is enabled to the transcoder */
-		WARN(!((pch_dpll >> (4 * intel_crtc->pipe)) & 8),
-		     "transcoder %d PLL not enabled\n", intel_crtc->pipe);
+		cur_state = pll->pll_reg == _PCH_DPLL_B;
+		if (!WARN(((pch_dpll >> (4 * crtc->pipe)) & 1) != cur_state,
+			  "PLL[%d] not attached to this transcoder %d: %08x\n",
+			  cur_state, crtc->pipe, pch_dpll)) {
+			cur_state = !!(val >> (4*crtc->pipe + 3));
+			WARN(cur_state != state,
+			     "PLL[%d] not %s on this transcoder %d: %08x\n",
+			     pll->pll_reg == _PCH_DPLL_B,
+			     state_string(state),
+			     crtc->pipe,
+			     val);
+		}
 	}
-
-	reg = intel_crtc->pch_pll->pll_reg;
-	val = I915_READ(reg);
-	cur_state = !!(val & DPLL_VCO_ENABLE);
-	WARN(cur_state != state,
-	     "PCH PLL state assertion failure (expected %s, current %s)\n",
-	     state_string(state), state_string(cur_state));
 }
-#define assert_pch_pll_enabled(d, p) assert_pch_pll(d, p, true)
-#define assert_pch_pll_disabled(d, p) assert_pch_pll(d, p, false)
+#define assert_pch_pll_enabled(d, p, c) assert_pch_pll(d, p, c, true)
+#define assert_pch_pll_disabled(d, p, c) assert_pch_pll(d, p, c, false)
 
 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
 			  enum pipe pipe, bool state)
@@ -1424,7 +1432,7 @@ static void intel_enable_pch_pll(struct intel_crtc *intel_crtc)
 	assert_pch_refclk_enabled(dev_priv);
 
 	if (pll->active++ && pll->on) {
-		assert_pch_pll_enabled(dev_priv, intel_crtc);
+		assert_pch_pll_enabled(dev_priv, pll, NULL);
 		return;
 	}
 
@@ -1460,12 +1468,12 @@ static void intel_disable_pch_pll(struct intel_crtc *intel_crtc)
 		      intel_crtc->base.base.id);
 
 	if (WARN_ON(pll->active == 0)) {
-		assert_pch_pll_disabled(dev_priv, intel_crtc);
+		assert_pch_pll_disabled(dev_priv, pll, NULL);
 		return;
 	}
 
 	if (--pll->active) {
-		assert_pch_pll_enabled(dev_priv, intel_crtc);
+		assert_pch_pll_enabled(dev_priv, pll, NULL);
 		return;
 	}
 
@@ -1495,7 +1503,9 @@ static void intel_enable_transcoder(struct drm_i915_private *dev_priv,
 	BUG_ON(dev_priv->info->gen < 5);
 
 	/* Make sure PCH DPLL is enabled */
-	assert_pch_pll_enabled(dev_priv, to_intel_crtc(crtc));
+	assert_pch_pll_enabled(dev_priv,
+			       to_intel_crtc(crtc)->pch_pll,
+			       to_intel_crtc(crtc));
 
 	/* FDI must be feeding us bits for PCH ports */
 	assert_fdi_tx_enabled(dev_priv, pipe);

drivers/gpu/drm/i915/intel_dp.c

@@ -266,6 +266,9 @@ intel_dp_mode_valid(struct drm_connector *connector,
 	if (mode->clock < 10000)
 		return MODE_CLOCK_LOW;
 
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+		return MODE_H_ILLEGAL;
+
 	return MODE_OK;
 }
 
@@ -702,6 +705,9 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
 		mode->clock = intel_dp->panel_fixed_mode->clock;
 	}
 
+	if (mode->flags & DRM_MODE_FLAG_DBLCLK)
+		return false;
+
 	DRM_DEBUG_KMS("DP link computation with max lane count %i "
 		      "max bw %02x pixel clock %iKHz\n",
 		      max_lane_count, bws[max_clock], mode->clock);
@@ -1154,11 +1160,10 @@ static void ironlake_edp_panel_off(struct intel_dp *intel_dp)
 
 	DRM_DEBUG_KMS("Turn eDP power off\n");
 
-	WARN(intel_dp->want_panel_vdd, "Cannot turn power off while VDD is on\n");
-	ironlake_panel_vdd_off_sync(intel_dp); /* finish any pending work */
+	WARN(!intel_dp->want_panel_vdd, "Need VDD to turn off panel\n");
 
 	pp = ironlake_get_pp_control(dev_priv);
-	pp &= ~(POWER_TARGET_ON | EDP_FORCE_VDD | PANEL_POWER_RESET | EDP_BLC_ENABLE);
+	pp &= ~(POWER_TARGET_ON | PANEL_POWER_RESET | EDP_BLC_ENABLE);
 	I915_WRITE(PCH_PP_CONTROL, pp);
 	POSTING_READ(PCH_PP_CONTROL);
 
@@ -1266,18 +1271,16 @@ static void intel_dp_prepare(struct drm_encoder *encoder)
 {
 	struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 
+
+	/* Make sure the panel is off before trying to change the mode. But also
+	 * ensure that we have vdd while we switch off the panel. */
+	ironlake_edp_panel_vdd_on(intel_dp);
 	ironlake_edp_backlight_off(intel_dp);
 	ironlake_edp_panel_off(intel_dp);
 
-	/* Wake up the sink first */
-	ironlake_edp_panel_vdd_on(intel_dp);
 	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
 	intel_dp_link_down(intel_dp);
 	ironlake_edp_panel_vdd_off(intel_dp, false);
-
-	/* Make sure the panel is off before trying to
-	 * change the mode
-	 */
 }
 
 static void intel_dp_commit(struct drm_encoder *encoder)
@@ -1309,10 +1312,11 @@ intel_dp_dpms(struct drm_encoder *encoder, int mode)
 	uint32_t dp_reg = I915_READ(intel_dp->output_reg);
 
 	if (mode != DRM_MODE_DPMS_ON) {
+		/* Switching the panel off requires vdd. */
+		ironlake_edp_panel_vdd_on(intel_dp);
 		ironlake_edp_backlight_off(intel_dp);
 		ironlake_edp_panel_off(intel_dp);
 
-		ironlake_edp_panel_vdd_on(intel_dp);
 		intel_dp_sink_dpms(intel_dp, mode);
 		intel_dp_link_down(intel_dp);
 		ironlake_edp_panel_vdd_off(intel_dp, false);

drivers/gpu/drm/i915/intel_i2c.c

@@ -396,11 +396,22 @@ clear_err:
 	 * Wait for bus to IDLE before clearing NAK.
 	 * If we clear the NAK while bus is still active, then it will stay
 	 * active and the next transaction may fail.
+	 *
+	 * If no ACK is received during the address phase of a transaction, the
+	 * adapter must report -ENXIO. It is not clear what to return if no ACK
+	 * is received at other times. But we have to be careful to not return
+	 * spurious -ENXIO because that will prevent i2c and drm edid functions
+	 * from retrying. So return -ENXIO only when gmbus properly quiescents -
+	 * timing out seems to happen when there _is_ a ddc chip present, but
+	 * it's slow responding and only answers on the 2nd retry.
 	 */
+	ret = -ENXIO;
 	if (wait_for((I915_READ(GMBUS2 + reg_offset) & GMBUS_ACTIVE) == 0,
-		     10))
+		     10)) {
 		DRM_DEBUG_KMS("GMBUS [%s] timed out after NAK\n",
 			      adapter->name);
+		ret = -ETIMEDOUT;
+	}
 
 	/* Toggle the Software Clear Interrupt bit. This has the effect
 	 * of resetting the GMBUS controller and so clearing the
@@ -414,14 +425,6 @@ clear_err:
 			 adapter->name, msgs[i].addr,
 			 (msgs[i].flags & I2C_M_RD) ? 'r' : 'w', msgs[i].len);
 
-	/*
-	 * If no ACK is received during the address phase of a transaction,
-	 * the adapter must report -ENXIO.
-	 * It is not clear what to return if no ACK is received at other times.
-	 * So, we always return -ENXIO in all NAK cases, to ensure we send
-	 * it at least during the one case that is specified.
-	 */
-	ret = -ENXIO;
 	goto out;
 
 timeout:

drivers/gpu/drm/i915/intel_lvds.c

@@ -745,6 +745,14 @@ static const struct dmi_system_id intel_no_lvds[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "AT5NM10T-I"),
 		},
 	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Hewlett-Packard HP t5740e Thin Client",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "HP t5740e Thin Client"),
+		},
+	},
 	{
 		.callback = intel_no_lvds_dmi_callback,
 		.ident = "Hewlett-Packard t5745",

drivers/gpu/drm/i915/intel_pm.c

@@ -2270,10 +2270,33 @@ void ironlake_disable_drps(struct drm_device *dev)
 void gen6_set_rps(struct drm_device *dev, u8 val)
 {
 	struct drm_i915_private *dev_priv = dev->dev_private;
-	u32 swreq;
+	u32 limits;
 
-	swreq = (val & 0x3ff) << 25;
-	I915_WRITE(GEN6_RPNSWREQ, swreq);
+	limits = 0;
+	if (val >= dev_priv->max_delay)
+		val = dev_priv->max_delay;
+	else
+		limits |= dev_priv->max_delay << 24;
+
+	if (val <= dev_priv->min_delay)
+		val = dev_priv->min_delay;
+	else
+		limits |= dev_priv->min_delay << 16;
+
+	if (val == dev_priv->cur_delay)
+		return;
+
+	I915_WRITE(GEN6_RPNSWREQ,
+		   GEN6_FREQUENCY(val) |
+		   GEN6_OFFSET(0) |
+		   GEN6_AGGRESSIVE_TURBO);
+
+	/* Make sure we continue to get interrupts
+	 * until we hit the minimum or maximum frequencies.
+	 */
+	I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, limits);
+
+	dev_priv->cur_delay = val;
 }
 
 void gen6_disable_rps(struct drm_device *dev)
@@ -2327,11 +2350,10 @@ int intel_enable_rc6(const struct drm_device *dev)
 void gen6_enable_rps(struct drm_i915_private *dev_priv)
 {
 	struct intel_ring_buffer *ring;
-	u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
-	u32 gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
+	u32 rp_state_cap;
+	u32 gt_perf_status;
 	u32 pcu_mbox, rc6_mask = 0;
 	u32 gtfifodbg;
-	int cur_freq, min_freq, max_freq;
 	int rc6_mode;
 	int i;
 
@@ -2352,6 +2374,14 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv)
 
 	gen6_gt_force_wake_get(dev_priv);
 
+	rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
+	gt_perf_status = I915_READ(GEN6_GT_PERF_STATUS);
+
+	/* In units of 100MHz */
+	dev_priv->max_delay = rp_state_cap & 0xff;
+	dev_priv->min_delay = (rp_state_cap & 0xff0000) >> 16;
+	dev_priv->cur_delay = 0;
+
 	/* disable the counters and set deterministic thresholds */
 	I915_WRITE(GEN6_RC_CONTROL, 0);
 
@@ -2399,8 +2429,8 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv)
 
 	I915_WRITE(GEN6_RP_DOWN_TIMEOUT, 1000000);
 	I915_WRITE(GEN6_RP_INTERRUPT_LIMITS,
-		   18 << 24 |
-		   6 << 16);
+		   dev_priv->max_delay << 24 |
+		   dev_priv->min_delay << 16);
 	I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000);
 	I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000);
 	I915_WRITE(GEN6_RP_UP_EI, 100000);
@@ -2408,7 +2438,7 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv)
 	I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10);
 	I915_WRITE(GEN6_RP_CONTROL,
 		   GEN6_RP_MEDIA_TURBO |
-		   GEN6_RP_MEDIA_HW_MODE |
+		   GEN6_RP_MEDIA_HW_NORMAL_MODE |
 		   GEN6_RP_MEDIA_IS_GFX |
 		   GEN6_RP_ENABLE |
 		   GEN6_RP_UP_BUSY_AVG |
@@ -2426,10 +2456,6 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv)
 		     500))
 		DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
 
-	min_freq = (rp_state_cap & 0xff0000) >> 16;
-	max_freq = rp_state_cap & 0xff;
-	cur_freq = (gt_perf_status & 0xff00) >> 8;
-
 	/* Check for overclock support */
 	if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0,
 		     500))
@@ -2440,14 +2466,11 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv)
 		     500))
 		DRM_ERROR("timeout waiting for pcode mailbox to finish\n");
 	if (pcu_mbox & (1<<31)) { /* OC supported */
-		max_freq = pcu_mbox & 0xff;
+		dev_priv->max_delay = pcu_mbox & 0xff;
 		DRM_DEBUG_DRIVER("overclocking supported, adjusting frequency max to %dMHz\n", pcu_mbox * 50);
 	}
 
-	/* In units of 100MHz */
-	dev_priv->max_delay = max_freq;
-	dev_priv->min_delay = min_freq;
-	dev_priv->cur_delay = cur_freq;
+	gen6_set_rps(dev_priv->dev, (gt_perf_status & 0xff00) >> 8);
 
 	/* requires MSI enabled */
 	I915_WRITE(GEN6_PMIER,
@@ -3580,8 +3603,9 @@ static void gen6_sanitize_pm(struct drm_device *dev)
 		limits |= (dev_priv->min_delay & 0x3f) << 16;
 
 	if (old != limits) {
-		DRM_ERROR("Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected %08x, was %08x\n",
-			  limits, old);
+		/* Note that the known failure case is to read back 0. */
+		DRM_DEBUG_DRIVER("Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS "
+				 "expected %08x, was %08x\n", limits, old);
 		I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, limits);
 	}
 

drivers/gpu/drm/i915/intel_sdvo.c

@@ -783,10 +783,12 @@ static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd,
 		((v_sync_len & 0x30) >> 4);
 
 	dtd->part2.dtd_flags = 0x18;
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		dtd->part2.dtd_flags |= DTD_FLAG_INTERLACE;
 	if (mode->flags & DRM_MODE_FLAG_PHSYNC)
-		dtd->part2.dtd_flags |= 0x2;
+		dtd->part2.dtd_flags |= DTD_FLAG_HSYNC_POSITIVE;
 	if (mode->flags & DRM_MODE_FLAG_PVSYNC)
-		dtd->part2.dtd_flags |= 0x4;
+		dtd->part2.dtd_flags |= DTD_FLAG_VSYNC_POSITIVE;
 
 	dtd->part2.sdvo_flags = 0;
 	dtd->part2.v_sync_off_high = v_sync_offset & 0xc0;
@@ -820,9 +822,11 @@ static void intel_sdvo_get_mode_from_dtd(struct drm_display_mode * mode,
 	mode->clock = dtd->part1.clock * 10;
 
 	mode->flags &= ~(DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC);
-	if (dtd->part2.dtd_flags & 0x2)
+	if (dtd->part2.dtd_flags & DTD_FLAG_INTERLACE)
+		mode->flags |= DRM_MODE_FLAG_INTERLACE;
+	if (dtd->part2.dtd_flags & DTD_FLAG_HSYNC_POSITIVE)
 		mode->flags |= DRM_MODE_FLAG_PHSYNC;
-	if (dtd->part2.dtd_flags & 0x4)
+	if (dtd->part2.dtd_flags & DTD_FLAG_VSYNC_POSITIVE)
 		mode->flags |= DRM_MODE_FLAG_PVSYNC;
 }
 

drivers/gpu/drm/i915/intel_sdvo_regs.h

@@ -61,6 +61,11 @@ struct intel_sdvo_caps {
 	u16 output_flags;
 } __attribute__((packed));
 
+/* Note: SDVO detailed timing flags match EDID misc flags. */
+#define DTD_FLAG_HSYNC_POSITIVE (1 << 1)
+#define DTD_FLAG_VSYNC_POSITIVE (1 << 2)
+#define DTD_FLAG_INTERLACE	(1 << 7)
+
 /** This matches the EDID DTD structure, more or less */
 struct intel_sdvo_dtd {
 	struct {

drivers/gpu/drm/i915/intel_tv.c

@@ -673,6 +673,54 @@ static const struct tv_mode tv_modes[] = {
 
 		.filter_table = filter_table,
 	},
+	{
+		.name       = "480p",
+		.clock		= 107520,
+		.refresh	= 59940,
+		.oversample     = TV_OVERSAMPLE_4X,
+		.component_only = 1,
+
+		.hsync_end      = 64,               .hblank_end         = 122,
+		.hblank_start   = 842,              .htotal             = 857,
+
+		.progressive    = true,		    .trilevel_sync = false,
+
+		.vsync_start_f1 = 12,               .vsync_start_f2     = 12,
+		.vsync_len      = 12,
+
+		.veq_ena        = false,
+
+		.vi_end_f1      = 44,               .vi_end_f2          = 44,
+		.nbr_end        = 479,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
+	{
+		.name       = "576p",
+		.clock		= 107520,
+		.refresh	= 50000,
+		.oversample     = TV_OVERSAMPLE_4X,
+		.component_only = 1,
+
+		.hsync_end      = 64,               .hblank_end         = 139,
+		.hblank_start   = 859,              .htotal             = 863,
+
+		.progressive    = true,		    .trilevel_sync = false,
+
+		.vsync_start_f1 = 10,               .vsync_start_f2     = 10,
+		.vsync_len      = 10,
+
+		.veq_ena        = false,
+
+		.vi_end_f1      = 48,               .vi_end_f2          = 48,
+		.nbr_end        = 575,
+
+		.burst_ena      = false,
+
+		.filter_table = filter_table,
+	},
 	{
 		.name       = "720p@60Hz",
 		.clock		= 148800,
@@ -1194,6 +1242,11 @@ intel_tv_detect_type(struct intel_tv *intel_tv,
 
 	I915_WRITE(TV_DAC, save_tv_dac & ~TVDAC_STATE_CHG_EN);
 	I915_WRITE(TV_CTL, save_tv_ctl);
+	POSTING_READ(TV_CTL);
+
+	/* For unknown reasons the hw barfs if we don't do this vblank wait. */
+	intel_wait_for_vblank(intel_tv->base.base.dev,
+			      to_intel_crtc(intel_tv->base.base.crtc)->pipe);
 
 	/* Restore interrupt config */
 	if (connector->polled & DRM_CONNECTOR_POLL_HPD) {