ASoC: tlv320aic3x: add input clock selection

This patch adds input selection of main codec clock - from what pin.
Both registers set same value since codec uses clock divider or pll at one time.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

sound/soc/codecs/tlv320aic3x.c

@@ -1002,6 +1002,12 @@ static int aic3x_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 	struct snd_soc_codec *codec = codec_dai->codec;
 	struct aic3x_priv *aic3x = snd_soc_codec_get_drvdata(codec);
 
+	/* set clock on MCLK or GPIO2 or BCLK */
+	snd_soc_update_bits(codec, AIC3X_CLKGEN_CTRL_REG, PLLCLK_IN_MASK,
+				clk_id << PLLCLK_IN_SHIFT);
+	snd_soc_update_bits(codec, AIC3X_CLKGEN_CTRL_REG, CLKDIV_IN_MASK,
+				clk_id << CLKDIV_IN_SHIFT);
+
 	aic3x->sysclk = freq;
 	return 0;
 }

sound/soc/codecs/tlv320aic3x.h

@@ -195,6 +195,14 @@
 #define PLL_CLKIN_SHIFT		4
 #define MCLK_SOURCE		0x0
 #define PLL_CLKDIV_SHIFT	0
+#define PLLCLK_IN_MASK		0x30
+#define PLLCLK_IN_SHIFT		4
+#define CLKDIV_IN_MASK		0xc0
+#define CLKDIV_IN_SHIFT		6
+/* clock in source */
+#define CLKIN_MCLK		0
+#define CLKIN_GPIO2		1
+#define CLKIN_BCLK		2
 
 /* Software reset register bits */
 #define SOFT_RESET		0x80